Browse by Document Type

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 4706.

UNSPECIFIED UNSPECIFIED

KUMAR, ABHISHEK and AKULA, SANKARA and DEY, SHOBHANA (2021) Conservation of Resources by Processing of Waste Dumped Iron Ore Fines. December 2021, Vol. 63, No. 3-4 . pp. 55-69. (Unpublished)

Abdlmanam, S and Elmaryami, A and Omar, Badrul (2011) Developing 1-D mm of axisymmetric transient quenched molybdenum steel AISI-SAE 4037H to determine lowest hardness point. Journal of Metallurgy and Materials Science, 53 (3). pp. 289-303.

Abhilash, and VenkatRaman, R and Mehta, K D and Pandey, B D (2011) Isolation and growth kinetic studies of novel isolates from Indian Ocean nodules. Indian Journal of Marine Sciences, 40 (5). pp. 648-652.

Abhilash, (2013) Interview in Down to Earth Magazine. Down to Earth Magazine, February . p. 41.

Abhilash, and Agarwal, Harshita and Meshram, Pratima and Meshram, Rohit B and Jha, Soni and Patel, J N and Soni, M K and Rokkam, Kiran and Mashruwala, Sheeba (2021) Green process for recovery of vanadium from hazardous spent contact process catalyst by oxalic acid: kinetics and mechanism. Separation Science and Technology (1.75).

Abhilash, and Dhal, B and Mehta, K D and Kumar, Vinay and Pandey, B D (2011) Bio-processing for metal extraction, recycling and effluent treatment- an overview. The Banaras Metallurgist, 16 ( ). pp. 109-115.

Abhilash, and Ghosh, Anirban and Pandey, B D (2015) Bioleaching of low grade granitic chalcopyrite ore by hyperthermophiles: Elucidation of kinetics-mechanism. Revue de Métallurgie, 112/5 (IF-0.176). pp. 1-14.

Abhilash, and Ghosh, Anirban and Sarkar, Supriyo and Pandey, B D (2015) Microbial Variants from Iron Ore Slimes: Mineral Specificity and pH Tolerance. Indian Journal of Microbiology, 55(4) (IF-0.899). pp. 430-449.

Abhilash, and Hedrich, Sabrina and Meshram, Pratima and Schippers, Axel and Gupta, A and Sen, Subhadra (2022) Extraction of REEs from Blast Furnace Slag by Gluconobacter oxydans. Minerals, 12(6) .

Abhilash, and Hedrich, Sabrina and Schippers, Axel (2021) Distribution of scandium in red mud and extraction using Gluconobacter oxydans. Hydrometallurgy, 202 (3.356).

Abhilash, and Inamdar, I (2022) Recycling of plastic wastes generated from COVID-19: A comprehensive illustration of type and properties of plastics with remedial options. Science of Total Environment, 838(1) .

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2011) Bioleaching - An Alternate Uranium Ore Processing Technology for India. Energy Proceedia, 7 . pp. 158-162.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2010) Column Bioleaching of a Low-Grade Silicate Ore of Uranium. Mineral Processing and Extractive Metallurgy Review, 31 (4). pp. 224-235.

Abhilash, and Mehta, K D and Pandey, B D (2013) Bacterial leaching kinetics for copper dissolution from a lowgrade Indian chalcopyrite ore. Rem: Revista Escola de Minas, 66(2) (IF-0.785). pp. 245-250.

Abhilash, and Mehta, K D and Pandey, B D (2012) Efficacy of Bacterial Adaptation on Copper Biodissolution from a Low Grade Chalcopyrite Ore by A. ferrooxidans. International Journal of Nonferrous Metallurgy, 1 (1). pp. 1-7.

Abhilash, and Meshram, Pratima and Gupta, A and Sen, Subhadra (2023) Steel Plant Wastes as a Resource of Rare Earth Elements and Rare Metals–Characterisation, Resource Estimation, and Economic Assessment. Transactions of the Indian Institute of Metals .

Abhilash, and Meshram, Pratima and Sarkar, Supriyo and Venugopalan, T (2017) Exploring Blast Furnace Slag As A Secondary Resource For Extraction Of Rare Earth Elements. Minerals & Metallurgical Processing Journal, 34(4) (IF-0.692). pp. 178-182.

Abhilash, and Meshram, Pratima and Sinha, S and Pandey, B D and Kumari, V K and Kar, S (2019) Chloride leaching of lanthanum and cerium from Indian red mud and metal separation studies. Metallurgical Research & Technology, 116(2) (IF-0.641).

Abhilash, and Nair, D G and Hansdah, Kirtal and Dhal, B and Mehta, K D and Pandey, B D (2012) Bioremoval of Chromium (III) from Model Tanning Effluent by Novel Microbial Isolate. International Journal of Metallurgical Engineering, 1 (2). pp. 12-16.

Abhilash, and Pal , SC and Mehta, K D and Pandey, B D and Mankhand, T R (2012) Bioprocessing of a Low-grade Chalcopyrite Ore by the Isolate of Acidithiobacillus Ferrooxidans. International Journal of Metallurgical Engineering, 1(5) . pp. 72-77.

Abhilash, and Pandey, B D (2013) Bioreactor leaching of uranium from a low grade Indian silicate ore. Biochemical Engineering Journal, 71 (IF-2.645). pp. 111-117.

Abhilash, and Pandey, B D (2013) Microbial processing of apatite rich low grade Indian uranium ore in bioreactor. Bioresource Technology, 128 (IF-4.980). pp. 619-623.

Abhilash, and Pandey, B D (2013) Microbially Assisted Leaching of Uranium—A Review. Mineral Processing and Extractive Metallurgy Review, 34 . pp. 81-113.

Abhilash, and Pandey, B D (2011) Role of ferric ions in bioleaching of uranium from low tenor Indian ore. Canadian Metallurgical Quaterly, 50 (2). pp. 102-112.

Abhilash, and Pandey, B D (2012) Synthesis of zinc-based nanomaterials: a biological perspective. IET-Nanobiotechnology, 6 (4). pp. 144-148.

Abhilash, and Pandey, B D and Ray, Lalithagauri (2012) Bioleaching of apatite rich low grade Indian uranium ore. Canadian Metallurgical Quaterly, 51 (4). pp. 390-402.

Abhilash, and Pandey, B D and Singh, A K (2013) Comparative Performance of Uranium Bioleaching from Low Grade Indian Apatite Rock in Column and Bioreactor. Energy Procedia, 39 . pp. 20-32.

Abhilash, and Revati, K and Pandey, B D (2011) Microbial synthesis of iron-based nanomaterials—A review. Bulletin of Material Science, 34 (2). pp. 191-198.

Abhilash, and Singh, S and Mehta, K D and Kumar, Vinay and Pandey, B D and Pandey, V M (2009) Dissolution of uranium from silicate-apatite ore by Acidithiobacillus ferrooxidans. Hydrometallurgy, 95 (1-2). pp. 70-75.

Abhilash, and Sinha, Manish K and Sinha, Shivendra and Pandey, B D (2014) Extraction of lanthanum and cerium from Indian red mud. International Journal of Mineral Processing, 127 (IF-1.461). pp. 70-73.

Abhilash, and Tabassum, Shirin and Ghosh, Anirban and Meshram, Pratima and van Hullebusch, Eric (2021) Microbial Processing of Waste Shredded PCBs for Copper Extraction Cum Separation—Comparing the Efficacy of Bacterial and Fungal Leaching Kinetics and Yields. Metals, 11, 317 (2.369).

Abhilash, and Usha, Yenni and Seetharaman, K and Meshram, Pratima and Mehta, K D and Pandey, B D (2021) Application of Hydrodynamics Using CFD in Evaluating Efficacy of External Loop Air-lift Reactor Biochemical Leaching of Sea Nodules. Mineral Processing and Extractive Metallurgy Review .

Abhilash, and Vaidyanathan, Swetha and Meshram, Pratima (2021) An overview on chemical processes for synthesis of graphene from waste carbon resources. Carbon Letters (1.917).

Abhilash, and Venkat Ramam, R and Mehta, K D and Pandey, B D (2010) Native Marine Isolates from Indian Ocean Nodules. Microbiology Focus, 2.3 . p. 7.

Abido, A M (1969) Flotation characteristics of plagioclase feldspar. NML Technical Journal, 11 (2). pp. 25-29.

Addanki Rao, S and Lahiri, A K and Banerjee, T (1961) Corrosion of Nickel in Steam Condensate Containing Air and Carbondioxide. NML Technical Journal, 3 (4). pp. 21-24.

Addanki Rao, S and Mukherjee, K P and Lahiri, A K and Banerjee, T (1963) Corrosion of metals and alloys exposed at Jamshedpur. NML Technical Journal, 5 (3). pp. 18-24.

Adediran, A A and Akinwande, A A and Adesina, O S and Agbaso, V and Balogun, O A and Kumar, B Ravi (2023) Modeling and optimization of green-Al 6061 prepared from environmentally source materials. Heliyon, 9(8) .

Adekunle , Adeleke and Jamiu , Odusote and Peter , Ikubanni and Olumuyiwa , Lasode and Madhurai , Malathi and Paswan, Dayanand (2021) Physical and mechanical characteristics of composite briquette from coal and pretreated wood fines. Int J Coal Sci Technol .

Adeleke, A A and Odusote, J K and Ikubanni, P P and Lasode, O A and Agboola, O O and Ammasi, A and Ajao, K R (2018) Dataset on the evaluation of chemical and mechanical properties of steel rods from local steel plants and collapsed building sites. Data in Brief, 21 (IF-). pp. 1552-1557.

Adeleke, A A and Odusote, J K and Ikubanni, P P and Lasode, O A and Malathi, M and Paswan, Dayanand (2020) Essential basics on biomass torrefaction, densification and utilization. International Journal of Energy Research, 45(2) (IF-3.741). pp. 1375-1395.

Adeleke, A A and Odusote, J K and Ikubanni, P P and Orthadahwe, T A and Lasode, O A and Ammasi, A and Kumar, K (2021) Ash analyses of bio‑coal briquettes produced using blended binder. Scientific Reports (IF-3.99).

Adeleke, A A and Odusote, J K and Lasode, O A and Ajani, O Lasode and Ikubanni, P P and Malathi, M and Paswan, Dayanand (2019) Mild pyrolytic treatment of Gmelina arborea for optimum energetic yields. Cogent Engineering, 6(1) . 1593073-1-13.

Adeleke, A A and Odusote, J K and Lasode, O A and Ikubanni, P P and Malathi, M and Paswan, Dayanand (2019) Evaluation of Thermal Decomposition Characteristics and Kinetic Parameters of Melina Wood. Biofuels (IF-1.130). pp. 1-7.

Adeleke, A A and Odusote, J K and Lasode, O A and Ikubanni, P.P. and Malathi, M and Paswan, D (2019) Densification of coal fines and mildly torrefied biomass into composite fuel using different organic binders. Heliyon, 5(7) (Cite Score-1.66).

Adeleke, A A and Odusote, J K and Paswan, Dayanand and Lasode, O A and Malathi, M (2019) Influence of Torrefaction on Lignocellulosic Woody Biomass of Nigerian Origin. Journal of Chemical Technology and Metallurgy, 54(2) . pp. 274-285.

Adhikari, U B and Das, S K and Banerjee, G (1998) Bonding of high fly ash content ceramic bodies at low temperatures. pp. 143-148.

Adhikary, M and Chakraborty, A and Das, A and Venugopalan, T and Kumar, B R (2019) Influence of annealing texture on dynamic tensile deformation characteristics of Dual phase steel (vol 736, pg 209, 2018). Materials Science and Engineering: A, 756 (IF-4.081). p. 312.

Adhikary, M and Chakraborty, A and Das, A and Venugopalan, T and Ravi Kumar, B (2018) Influence of annealing texture on dynamic tensile deformation characteristics of Dual phase steel. Materials Science and Engineering: A , 736 (IF-4.081). pp. 209-218.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Development of Chromite Sinter from Ultra-Fine Chromite Ore by Direct Sintering. ISIJ International, 54(3) (IF-1.069). pp. 559-566.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking .

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking, 43(2) (IF-0.985). pp. 97-111.

Agate, A D (1973) Survey of Thiobacillus ferrooxidans in solubilization of copper sulphide ores. NML Technical Journal, 15 (4). pp. 25-27.

Agrawal, A (2005) Effluent treatment and by-product recovery from the sludge of an alumina plant. Minerals Engineering, 18 (4). pp. 463-465.

Agrawal, A and Bagchi, D and Kumari, S and Kumar, Vinay and Pandey, B D (2007) Recovery of nickel powder from copper bleed electrolyte of an Indian copper smelter by electrolysis. Powder Technology, 177 (3). pp. 133-139.

Agrawal, A and Bagchi, D and Kumari, S and Kumar , Vinay and Pandey, B D (2008) Hydrogen reduction of bleed stream of an Indian copper industry to produce nickel powder. Materials Letters, 62 (17-18). pp. 2880-2882.

Agrawal, A and Bagchi, D and Kumari, S and Pandey, B D (2009) An Overview of Process Options and behavioral Aspects of the Copper values recovered from the Copper Bleed Stream of a Copper Smelter developed at the National Metall-urgical Laboratory. Mineral Processing and Extractive Metallurgy (Trans. IMM C) . pp. 136-162.

Agrawal, A and Kumar, Vinay and Pandey, B D (2006) Remediation options for the treatmentf electroplating and leather tanning effluent containing chromium - A review. Mineral Processing & Extractive Metalllurgy, 27 . pp. 99-130.

Agrawal, A and Kumar, Vinay and Pandey, B D and Sahu, K K (2006) A comprehensive review on the hydro metallurgical process for the production of nickel and copper powders by hydrogen reduction. Materials Research Bulletin, 41 (4). pp. 879-892.

Agrawal, A and Kumari, S and Bagchi, D and Kumar, Vinay and Pandey, B D (2006) Hydrogen reduction of copper bleed solution from an Indian copper smelter for producing high purity copper powders. Hydrometallurgy, 84 (3-4). pp. 218-224.

Agrawal, A and Kumari, S and Bagchi, D and Kumar, Vinay and Pandey, B D (2007) Recovery of copper powder from copper bleed electrolyte of an Indian copper smelter by electrolysis. Minerals Engineering, 20 (1). pp. 95-97.

Agrawal, A and Kumari, S and Parveen, M and Sahu, K K (2012) Exploitation of Copper Bleed Stream for the Extraction and Recovery of Copper and Nickel by Bis(2,4,4-trimethylpentyl)phosphinic Acid. Mineral Processing and Extractive Metallurgy Review: An International Journal, 33 (5). pp. 339-351.

Agrawal, A and Kumari, S and Ray, B C and Sahu, K K (2007) Extraction of acid and iron values from sulphate waste pickle liquor of a steel industry by solvent extraction route. Hydrometallurgy, 88 (1-4). pp. 58-66.

Agrawal, A and Kumari, S and Sahu, K K (2009) Iron and copper recovery/removal from industrial wastes: A review. Industrial & Engineering Chemistry Research, 48 (13). pp. 6145-6161.

Agrawal, A and Kumari, S and Sahu, K K (2008) Liquid–liquid extraction of sulphuric acid from zinc bleed stream. Hydrometallurgy, 92 (1-2). pp. 42-47.

Agrawal, A and Kumari, S and Sahu, K K (2011) Studies on solvent extraction of iron(III) as a step for conversion of a waste effluent to a value added product. Journal of Environmental Management, 92 (12). pp. 3105-3111.

Agrawal, A and Manoj, M K and Kumari, S and Bagchi, D and Kumar, Vinay and Pandey, B D (2008) Extractive separation of copper and nickel from copper bleed stream by solvent extraction route. Minerals Engineering, 21 (15). pp. 1126-1130.

Agrawal, A and Mishra, D and Sahu, K K (2016) Comparative performance assessment of solvents for the extraction of H2SO4 from spent electrolytic bleed stream of copper industry. Journal of Molecular Liquids, 220 (IF-3.648). pp. 82-91.

Agrawal, A and Pal, C and Sahu, K K (2008) Extractive removal of chromium (VI) from industrial waste solution. Journal of Hazardous Materials, 159 (2-3). pp. 458-464.

Agrawal, A and Sahoo, K L and Ghosh, Sukomal and Pandey, B D (2002) Recovering Iron from Copper Slag. Foundry Management & Technology, October . pp. 16-21.

Agrawal, A and Sahu, K K (2004) Adsorption kinetics for the removal of Co(II) and Zn(II) from wastewater by indion BSR - a chelating ion-exchange resin. Adsorption Science & Technology , 22 (2). pp. 107-118.

Agrawal, A and Sahu, K K (2005) Influence of temperature on the exchange of alkaline earth and transition metals on iminodiacetate resin. Solvent Extraction and Ion Exchange, 23 (2). pp. 265-287.

Agrawal, A and Sahu, K K (2006) Kinetic and isotherm studies of cadmium adsorption on manganese nodule residue. Journal of Hazardous Materials, 137 (2). pp. 915-924.

Agrawal, A and Sahu, K K (2009) An overview of the recovery of acid from spent acidic solutions from steel and electroplating industries. Journal of Hazardous Materials, 171 (1-3). pp. 61-75.

Agrawal, A and Sahu, K K (2005) Potential utilisation of manganese nodule leach residue as a scavenger for cadmium from industrial effluents. Journal of Metallurgy and Materials Science, 47 (3). pp. 141-148.

Agrawal, A and Sahu, K K (2010) Problems, prospects and current trends of copper recycling in India: An overview. Resources, Conservation and Recycling, 54 (7). pp. 401-416.

Agrawal, A and Sahu, K K (2006) Separation and recovery of lead from a mixture of some heavy metals using Amberlite IRC 718 chelating resin. Journal of Hazardous Materials, 133 (1-3). pp. 299-303.

Agrawal, A and Sahu, K K (2010) Treatment of Chloride Waste Pickle Liquor by Solvent Extraction for the Recovery of Iron. Mineral Processing and Extractive Metallurgy Review, 31 (3). pp. 121-134.

Agrawal, A and Sahu, K K (2009) Value Addition to Sulfate Waste Pickle Liquor of Steel Industry Using Hydrometallurgical Processes. Metallurgical and Materials Transactions B, 40 (6). pp. 877-885.

Agrawal, A and Sahu, K K and Pandey, B D (2004) A Comparative adsorption study of copper on various industrial solid wastes. AIChE Journal, 50 (10). pp. 2430-2438.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Recent trends and current practices for secondary processing of zinc and lead. Part I: lead recovery from secondary sources. Waste Management & Research, 22 (4). pp. 240-247.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Removal of zinc from aqueous solutions using sea nodule residue. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 237 (1-3). pp. 133-140.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Separation and removal of cobalt and zinc from chloride solution by Indion BSR - A chelating resin. Separation Science and Technology, 39 (10). pp. 2373-2388.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Solid waste management in non-ferrous industries in India. Resources, Conservation and Recycling, 42 (2). pp. 99-120.

Agrawal, A and Sahu, K K and Pandey, B D (2005) Systematic studies on adsorption of lead on sea nodule residues. Journal of Colloid and Interface Science, 281 (2). pp. 291-298.

Agrawal, A and Sahu, K K and Rawat, J P (2003) Kinetic studies on the exchange of bivalent metal ions on amberlite IRC-718-an iminodiacetate resin. Solvent Extraction and Ion Exchange, 21 (5). pp. 763-782.

Agrawal, A and Sekhar, K C and Pandey, L P (1994) Spectrophotometric determination of ce(iv) using o-phenylenediamine in steels. Bulletin of Materials Science, 17 (7). pp. 1467-1471.

Agrawal, J C and Davis Jr, W L (1962) Recent Advances in Blast-Furnace Technology. NML Technical Journal, 4 (4). pp. 23-30.

Ahmad, Khalil and Ali, Muhammad and Ibrahim , Ather and Baig, Waqas Mehmood (2014) Optimising the yield of silicon carbide synthesised from indigenous biomass husk using different catalysts. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 23-27.

Ahmed, Zanab and Kumari, Sarita and Goswami, N G and Sinha, Arvind and Bandyopadhyaya, Rajib (2016) A Report on the 6th Annual Conference of "National Academy of Sciences, India (NASI)" (September 24-25, 2014; Venue-CSIR-National Metallurgical Laboratory, Jamshedpur-831007). National Academy Science Letters - India, 39(2) (IF-0.369). pp. 133-134.

Ahuja, P L and Banerjee, T (1962) Structure of electrolytic silver-copper alloys. NML Technical Journal, 4 (2). pp. 15-20.

Ahuja, P L and Halder, B N and Bhatnagar, S S (1971) Structures of some 17% Cr(Mn, N) stainless steels. Journal of Materials Science, 6 (5). pp. 439-447.

Aich, S and Das, D and Al-Omari, I A and Alagarsamy, P and Ghosh Chowdhury, S and Chakraborty, M and Shield, J E and Sellmyer, D J (2009) Microstructures and magnetic properties of rapidly solidified Ni54Fe27-2xGa19+2x ferromagnetic Heusler alloys. Journal of Applied Physics, 105 (7). 07A943.

Aireddy, H and Mishra, S C (2011) Tribological behavior and mechanical properties of Bio-waste reinforced polymer matrix composites. Journal of Metallurgy and Materials Science, 53 (2). pp. 139-152.

Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2017) c. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151.

Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2018) Overview On Extraction and Separation of Rare Earth Elements from Red Mud: Focus on Scandium. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151.

Akcil, Ata and Ibrahim, Y A and Meshram, Pratima and Panda, S and Abhilash, (2021) Hydrometallurgical recycling strategies for recovery of rare earth elements from consumer electronic scraps: a review. Journal of Chemical Technology & Biotechnology .

Akerkar, D D and Shahani, M J (1970) Development of hydrochloric acid pickling of steel in India. NML Technical Journal, 12 (4). pp. 87-92.

Akhtar, M and Khajuria, A (2020) Effects of prior austenite grain size on impression creep and microstructure in simulated heat affected zones of boron modified P91 steels. Materials Chemistry and Physics, 249 (IF-3.408). p. 122847.

Akhtar, M and Khajuria, A (2019) Probing true creep-hardening interaction in weld simulated heat affected zone of P91 steels. Journal of Manufacturing Processes, 46 (IF-3.462). pp. 345-356.

Akhtar, M and Khajuria, A (2019) Probing True Microstructure‑Hardening Relationship in Simulated Heat Affected Zone of P91B Steels. Metallography, Microstructure, and Analysis . pp. 656-677.

Akhtar, M and Khajuria, A (2022) The Synergistic Effects among Crystal Orientations, Creep Parameters, Local Strain, Macro-Microdeformation, and Polycrystals' Hardness of Boron Alloyed P91 Steels. Steel Research International .

Akhtar, M and Khajuria, A (2023) The Synergistic Effects of Boron and Impression Creep Testing during Paced Controlling of Temperature for P91 Steels. Advanced Engineering Materials .

Akhtar, M and Khajuria, A and Kumar, V S and Gupta, R K and Albert, S K (2019) Evolution of Microstructure during Welding Simulation of Boron Modified P91 Steel. The Physics of Metals and Metallography, 120(7) (IF-1.169). pp. 672-685.

Akhtar, M and Khajuria, A and Sahu, J K and Swaminathan, J and Kumar, Rajneesh and Bedi, R and Albert, S K (2018) Phase transformations and numerical modelling in simulated HAZ of nanostructured P91B steel for high temperature applications. Applied Nanoscience, 8(7) (IF-3.198). pp. 1669-1685.

Akhtar, Mohammad Nishat and Khan, Muneer and Khan, Sher Afghan and Afzal, Asif and Subbiah, Ram and Ahmad, Sheikh Nazir and Husain, M M and Butt, Mohammad Mursaleen and Othman, Abdul Rahim and Bakar, Elmi Abu (2021) Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel. Materials, 14(10) . p. 2639.

Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Hussain, Raja Rizwan and Al-Zaid, Rajeh and Singh, J K and Singh, D D N (2014) Role of Manganese Sulfide Inclusions in Steel Rebar in the Formation and Breakdown of Passive Films in Concrete Pore Solutions. Corrosion, 70(1) (IF-2.908). pp. 74-86.

Al-Negheimish, Abdulaziz and Alhozaimy , Abdulrahman and Hussain, R R and Singh, J K and Singh, D D N (2017) Pitting Susceptibility of Concrete Reinforcing Steel Bars Having Manganese Sulfide Inclusions. ACI Materials Journal, 114(3) (IF-1.183). pp. 441-451.

Al-Negheimish, Abdulaziz and Hussain, R R and Alhozaimy, Abdulrahman (2021) Corrosion performance of hot-dip galvanized zinc-aluminum coated steel rebars in comparison to the conventional pure zinc coated rebars in concrete environment. Construction and Building Materials, 274 . p. 121921.

Al-Samman, T and Li, X and Ghosh Chowdhury, S (2010) Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy. Materials Science and Engineering: A, 527 (15). pp. 3450-3463.

Alex, T C (2014) An insight into the changes in the thermal analysis curves of boehmite with mechanical activation. Journal of Thermal Analysis and Calorimetry, 117 (IF-2.206). pp. 163-171.

Alex, T C and Godiwalla, K M and Kumar, Sanjay and Jana, R K and Rao, A S and Singh, Manjit and Premchand, (2006) Studies on the extraction of manganese from sea nodule residue as ferrosilicomanganese. Steel Research International, 77 (3). pp. 147-151.

Alex, T C and Kailath, A J and Kumar, Rakesh (2020) Al-Monohydrate (Boehmite) to Al-Trihydrate(Bayerite/Gibbsite) Transformation During High-Energy Milling. Metallurgical and Materials Transactions B, 51 (IF-1.874). pp. 443-451.

Alex, T C and Kalinkin, A M and Nath, S K and Gurevich , B I and Kalinkina, E V and Tyukavkina, W and Kumar, Sanjay (2013) Utilization of zinc slag through geopolymerization: Influence of milling atmosphere. International Journal of Mineral Processing, 123 (IF-1.378). pp. 102-107.

Alex, T C and Kumar, Rakesh (2017) Surface and bulk activation of a siliceous bauxite during attrition milling. International Journal of Mineral Processing, 160 (IF-1.518). pp. 32-38.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2011) Anomalous reduction in surface area during mechanical activation of boehmite synthesized by thermal decomposition of gibbsite. Powder Technology, 208 (1). pp. 128-136.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2013) Leaching behaviour of high surface area synthetic boehmite in NaOH solution. Hydrometallurgy, 137 (IF-2.169). pp. 23-32.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2016) Mechanical Activation of Al-oxyhydroxide Minerals–A Review. Mineral Processing and Extractive Metallurgy Review, 37(1) (IF-1.219). pp. 1-26.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Mechanically induced reactivity of gibbsite: Part 1. Planetary milling. Powder Technology, 264 (IF-2.269). pp. 105-113.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Mechanically induced reactivity of gibbsite: Part 2. Attrition milling. Powder Technology, 264 (IF-2.269). pp. 229-235.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2008) Stirred bead mill grinding of gibbsite: Surface and morphological changes. Advanced Powder Technology, 19 (5). pp. 483-491.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Towards ambient pressure leaching of boehmite through mechanical activation. Hydrometallurgy, 144 (IF-2.224). pp. 99-106.

Alex, T C and Mucsi, G and Venugopalan, T and Kumar, Sanjay (2021) BOF Steel Slag: Critical Assessment and Integrated Approach for Utilization. Journal of Sustainable Metallurgy .

Alex, T C and Sasikumar, C and Kailath, A J and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2011) Analysis of Mechanically Induced Reactivity of Boehmite Using Kinetics of Boehmite to gamma-Al2O3 Transformation. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 42 (3). pp. 592-603.

Alhozaimy, Abdulrahman and Hussain, Raja Rizwan and Al-Negheimish, Abdulaziz and Al-Zaid, Rajeh and Singh, D D N (2014) Effect of Simulated Concrete Pore Solution Chemistry, Chloride Ions, and Temperature on Passive Layer Formed on Steel Reinforcement. ACI Materials Journal, 111/4 (IF-1.123). pp. 411-421.

Alhozaimy , Abdulrahman and Hussain, R R and Al-Negheimish, Abdulaziz and Singh, J K (2018) Protection against Reinforcement Corrosion Using Phosphoric Acid-Based Rust Converter. Aci Materials Journal, 115(6) (IF-1.453). pp. 935-944.

Ali, F and Scudino, S and Anwar, M S and Shahid, R N and Srivastava, V C and Uhlenwinkel, V and Stoica, M and Vaughan, G and Eckert, J (2014) Al-based metal matrix composites reinforced with Al-Cu-Fe quasicrystalline particles: Strengthening by interfacial reaction. Journal of Alloys and Compounds, 607 (IF-2.407). pp. 274-279.

Ali, F and Scudino, S and Gorantla, S M and Srivastava, V C and Shahid, H R and Uhlenwinkel, V and Stoica, M and Vaughan, G and Mukhopadhyay, N K and Eckert, J (2013) Mechanically driven phase transformation in single phase Al 62.5 Cu 25 Fe 12.5 quasi-crystals: Effect of milling intensity. Acta Materialia, 61 (IF-3.94). pp. 3819-3830.

Ali, F and Scudino, S and Liu, G and Srivastava, V C and Mukhopadhyay, N K and Khoshkhoo, M S and Prashanth, K G and Uhlenwinkel, V and Calin, M and Eckert, J (2012) Modeling the strengthening effect of Al–Cu–Fe quasicrystalline particles in Al-based metal matrix composites. Journal of Alloys and Compounds, 536S . S130-S133.

Ali, Rashid and Akhtar, Muhammad Umair and Zahoor, Aqib and Ali, Fahad and Scudino, Sergio and Shahid, Rub Nawaz and Tariq, Naeem ul Haq and Srivastava, V C and Uhlenwinkel, V and Hasan, B A and Eckert, J (2020) Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals. Materials Chemistry and Physics, 251 (IF-3.408). p. 123071.

Ali, Tayyab and Venkataraman, A (2013) Preparation and characterization of g-Fe2O3 dispersed polyvinyl alcohol (PVA) Nanocomposite film. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 293-297.

Ali, Tayyab and Venkataraman, A (2014) Synthesis and characterization of polyaniline coated functionalized g-Fe O nanoparticles. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 35-39.

Alphonsa, J and Sinha, G and Kumar, A and Jhala, G and Tiwari, S K and Gupta, S and Rayjada, P A and Chauhan, N and Raole, P M and Mukherjee, S (2008) Effect of frequency on the properties of plasma nitrided AISI 4340 steel. Journal of Metallurgy and Materials Science, 50 (2). pp. 119-125.

Alphonsa, J and Tiwari, S K and Jhala, G and Rayjada, P A and Raole, P M and Mukherji, S (2005) Influence of alloying elements on the corrosion properties of steels during plasma nitriding process. Journal of Metallurgy and Materials Science, 47 (1). pp. 31-38.

Altekar, V A (1975) Some problems of technology transfer in India. NML Technical Journal, 17 (3-4). pp. 9-12.

Altekar, V A (1973) Welcome Address on the inauguration of the Seminar on Bacterial leaching of ores. NML Technical Journal, 15 (4). pp. 1-2.

Altekar, V A and Banerjee, S K and Ghose, B N and Bhattacharya, J (1981) Development of clad metals for various applications. NML Technical Journal, 23 (3-4). pp. 32-36.

Altekar, V A and Kapoor, A N and Goswami, J and Singh, R S and Ghosh, S R and Ghosh, S B (1974) Some observations in the production of ferro-phosphorus in low shaft furnace. NML Technical Journal, 16 (3-4). pp. 27-34.

Altekar, V A and Shahani, M J and Saha, A K (1974) Adsorption of nickel by lignite. Fuel, 53 (1). pp. 29-31.

Altekar, V A and Singh, Inder and Banerjee, M K and Singh, M N (1982) Relations between the theoretical hydrogen and observed hydrogen in the presence of inhibitors. NML Technical Journal, 24 (3-4). pp. 19-21.

Altekar, V A and Singh, S R and Rao, G N and Virdhi, P S and Dash, R R (1978) Melting trials with cast-iron boring briquettes in cupola and arc furnace. Transactions of the Indian Institute of Metals, 31 (3). pp. 221-223.

Aman, Noor and Das, N N and Mishra, T (2016) Effect of N-doping on visible light activity of TiO2–SiO2 mixed oxide photocatalysts. Journal of Environmental Chemical Engineering, 4 (IF-1.355). pp. 191-196.

Aman, Noor and Mishra, T and Hait, Jhumki and Jana, R K (2011) Simultaneous photoreductive removal of copper (II) and selenium (IV) under visible light over spherical binary oxide photocatalyst. Journal of Hazardous Materials, 186 (12). pp. 360-366.

Aman, Noor and Mishra, T and Sahu, Ranjan K and Tiwari, J P (2010) Facile synthesis of mesoporous N doped zirconium titanium mixed oxide nanomaterial with enhanced photocatalytic activity under visible light. Journal of Materials Chemistry, 20 (48). pp. 10876-10882.

Aman, Noor and Satapathy, P K and Mishra, T and Mahato, M and Das, N N (2012) Synthesis and photocatalytic activity of mesoporous cerium doped TiO2 as visible light sensitive photocatalyst. Material Research Bulletin, 47 . pp. 179-183.

Ammasi, A (2021) Development of synthetic slag for desulphurisation of the steel during steelmaking in induction furnace. Advances in Materials and Processing Technologies, online .

Ammasi, A (2020) Effect of Heating Rate on Decomposition Temperature of Goethite Ore. Transactions of The Indian Institute of Metals, 73(1) (IF-1.205). pp. 93-98.

Ammasi, A and Pal, J (2021) Blast Furnace Flue Dust as a Potential Carbon Additive in Hematite Ore Pellet. Mineral Processing and Extractive Metallaurgy Review, Online published (IF-2.76).

Ammasi, A and Pal, J (2020) Reaction Mechanism of In-situ Carbon in Hematite Ore Pellet during Induration. Mineral Processing and Extractive Metallurgy Review (IF-2.785).

Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213.

Ammasi, A and Pal, J and Pal, Jagannath and Ammasi, Ayyandurai (2024) Use of Additives as Internal Heat Sources in Hematite Ore Pellets- A Review. Mineral Processing and Extractive Metallurgy Review, online (4.5).

Ammasi, A and Pal, Jagannath (2022) Kinetics of Carbon Oxidation During Induration of Hematite Ore Pellet. Mining Metallurgy & Exploration .

Ammasi, A and Ul Haque, M U (2023) Influence of rare earth metals on inclusion modification of dual phase steel Influence des metaux de terres rares sur la modification des inclusions de l'acier biphase. Canadian Metallurgical Quarterly .

Anand, Kumar Aniket and Nageswaran, Kartik and Kumar, Vinod and Saxena, Atul (2016) Hot deformation studies on 2.7% Si steel using gleeble thermo-mechanical simulator. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 251-258.

Anand, Kunjan Kumar and Mahato, B and Haase, C and Kumar, A and Ghosh Chowdhury, S (2018) Correlation of defect density with texture evolution during cold rolling of a Twinning-Induced Plasticity (TWIP) steel. Materials Science and Engineering A, 711 (IF-3.094). pp. 69-77.

Anand, Rounak Sneh and Kumar, Prakash and Paswan, Dayanand (2016) Conversion of Sponge Iron From Low Grade Iron ore And Mill Scale Through Simulating Tunnel Kiln Condition. IOSR Journal of Mechanical and Civil Engineering, 13(5) . pp. 49-54.

Anand, Sameer and Haldar, Nimai and Datta, Saurav and Das, Atanu (2023) Experimental investigation on microstructure and mechanical property of wire arc additively manufactured SS308L built part. Sadhana-Academy Proceedings in Engineering Sciences, 48(4) .

Ananda Kumar, S and Meenakshi, K Shree and Narasimhan, B R V and Srikanth, S and Arthanareeswaran, G (2009) Synthesis and characterization of copper nanofluid by a novel one-step method. Materials Chemistry and Physics, 113 . pp. 57-62.

Ananda Kumar, S and Sankara Narayanan, T S N (2002) Thermal properties of siliconized epoxy interpenetrating coatings. Progress in Organic Coatings, 45 (4). pp. 323-330.

Ananda Kumar, S and Shree Meenakshi, K and Sankara Narayanan, T S N and Srikanth, S (2008) Corrosion resistant behaviour of PANI–metal bilayer coatings. Progress in Organic Coatings, 62 (3). pp. 285-292.

Ananda Kumar, S and Sundara Raman, S Ganesh and Sankara Narayanan, T S N and Gnanamoorthy, R (2012) Fretting wear behaviour of surface mechanical attrition treated alloy 718. Surface and Coatings Technology, 206 . pp. 4425-4432.

Ananda Kumar, S and Sundara Raman, S Ganesh and Sankara Narayanan, T S N and Gnanamoorthy, R (2013) Influence of counterbody material on fretting wear behaviour of surface mechanical attrition treated Ti-6Al-4V. Tribology International, 57 (IF-1.536). pp. 107-114.

Anantapadmanabahn, S S and Mishra, G and Parida, S (2020) A brief review on the development of self-healing, hydrophobic and antifouling epoxy coating. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 1-11.

Andavarapu, Mohana Rao and A, Vidyadhar and Prasad, Ranjit (2022) Recovery of clean coking coal from difficult-to-wash low volatile coking coal fines of Jharia coalfield by multi gravity separator. International Journal of Coal Preparation and Utilization (2.791). pp. 1-21. (In Press)

Andavarapu, Mohana Rao and Vidyadhar, A and Prasad, R (2020) Beneficiation of difficult-to-wash Indian low volatile coking coal fines by Falcon concentrator. International Journal of Coal Preparation and Utilization .

Andavarapu, Mohana Rao and Vidyadhar, A and Prasad, Ranjit and Sahoo, M (2023) Efficacy of Pilot Scale Batac Jig on LVC Coal Utilization for Coke Making. Transactions of the Indian Institute of Metals .

Andavarapu, Mohana Rao and Vidyadhar, A and Ranjit, Prasad (2022) Beneficiation of difficult-to-wash Indian low volatile coking coal fines by Falcon concentrator. International Journal of Coal Preparation and Utilization, Volume 42, Issue 12 (2.791). pp. 3618-3636.

Anil, M and Srivastava, V C and Ghosh, M K and Ojha, S N (2010) Influence of tin content on tribological characteristics of spray formed Al–Si alloys. Wear, 268 (11-12). pp. 1250-1256.

Anjaneyulu, Ch and Murty, B S (2017) Soft magnetic properties of Fe-based bulk metallic glass system containing niobium and copper. Journal of Metallurgy and Materials Science, 59(3) . pp. 103-110.

Anumola, R and Ravi Kumar, B and Misra, R D K and Mannering, T and Panda, D and Jansto, S G (2008) On the determining role of microstructure of niobium-microalloyed steels with differences in impact toughness. Materials Science and Engineering A, 491 (1-2). pp. 55-61.

Arif, Md and Dey, Sukanta and Gond, Arvind K and Zong, Kequing and Liu, Yongsheng and Mitra, Anirban and Mitra, Aniruddha and Sarangi, Shushanta (2021) Mesoarchean continental intraplate volcanism and sedimentation: The case of the Simlipal basin, Singhbhum Craton, eastern India. Precambrian Research, 361 (IF-4.725). p. 106245.

Arora, K S and Pandey, S and Schaper, M and Kumar, Rajneesh (2010) Effect of process parameters on friction stir welding of aluminum alloy 2219-T87. The International Journal of Advanced Manufacturing Technology, 50 (9). pp. 941-952.

Arora, K S and Pandey, S and Schaper, M and Kumar, Rajneesh (2010) Microstructure Evolution during Friction Stir Welding of Aluminum Alloy AA2219. Journal of Materials Science & Technology, 26 (8). pp. 747-753.

Arora, P and Tewary, S and Krishnamurthi, S and Kumari, Neelam (2023) An experimental setup and segmentation method for CFU counting on an agar plate for the assessment of drinking water. Journal of Microbiological Methods, 214 .

Arora, Punit and Gupta, S K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2016) Testing and assessment of fatigue life prediction models for Indian PHWRs piping material under multi-axial load cycling. International Journal of Fatigue, 85 (IF-2.899). pp. 98-113.

Arora, Punit and Gupta, Suneel K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2015) Fatigue studies on Carbon-steel tubes under multiaxial loading. Transactions, SMiRT-23, Manchester, United Kingdom, August 10-14, 2015, Division III (Applied Computation Simulation and Animation) . pp. 1-13.

Arora, S M (1990) Hot-Dip Aluminising of Ferrous Materials. NML Technical Journal, 32 (1-4). pp. 29-39.

Arora, S M and Gupte, P K (1967) Feasibility of hot-dip aluminising high-tension transmission tower members. NML Technical Journal, 9 (2). pp. 12-17.

Arora, S M and Gupte, P K and Nijhawan, B R (1959) Linseed oil as an organic flux in hot-dip aluminising of steels. NML Technical Journal, 1 (3). pp. 9-16.

Arora, S M and Kapoor, A N and Gupte, P K and Nijhawan, B R (1963) Atmospheric corrosion resistance of aluminised M.S. wire exposed to saline atmosphere at Visakhapatnam. NML Technical Journal, 5 (3). pp. 5-9.

Arora, S M and Kapoor, A N and Gupte, P K and Nijhawan, B R (1961) Hot dip aluminising of M.S.Wire on Pilot Plant Scale. NML Technical Journal, 3 (4). pp. 4-9.

Arthanareeswari, M and Sankara Narayanan, T S N and Kamaraj, P and Tamilselvi, M (2010) Influence of galvanic coupling on the formation of zinc phosphate coating. Indian Journal of Chemical Technology, 17 (3). pp. 167-175.

Arthanareeswari, M and Sankara Narayanan, T S N and Kamaraj, P and Tamilselvi, M (2012) Polarization and impedance studies on zinc phosphate coating developed using galvanic coupling. Journal of coatings technology and research, 9 (1). pp. 39-46.

Aruna, S T and Latha, S and Lakshmi, R V (2020) Multifunctional properties of electrodeposited nickel composite coating containing nanosized monoclinic zirconia particles. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 63-74.

Aruna, V A J and Ravi, B P and Haran, N P and Ram, Mohan and Gundewar, C S (2013) Recovery of phosphate from lean resources. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 209-217.

Arunagiri, S and Venkataraman, G (1976) Creep rupture failures in superheater tubes of high pressure boilers. NML Technical Journal, 18 (4). pp. 81-86.

Ashiq, Md and Pushkar, Dhekne and Hamada, Atef Saad and Sahu, Puspendu and Mahato, B and Minz, R K and Ghosh Chowdhury, S and Karjalainen, L P (2017) Correlation of Microstructure and Texture in a Two-Phase High-Mn Twinning-Induced Plasticity Steel During Cold Rolling. Metallurgical and Materials Transactions A, 48(10) (I F-1.874). pp. 4842-4856.

Ashok, K and Mandal, G K and Bandyopadhyay, D (2015) Theoretical Investigation on Deoxidation of Liquid Steel for Fe–Al–Si–O System. Transactions of Indian Institute of Metals, 68 Suppl 1 (IF-0.615). pp. 9-18.

Ashok, K and Maruthupandian, K and Ganesh Kumar, K and Sundar Vishal, C (2015) Micro-mechanical Behaviour of AA2014 Alloy During Hot Tensile Testing. Transactions of Indian Institute of Metals, 68 Suppl 1 (IF-0.615). S19-S24.

Ashok, K and Sankar, P and Maruthupandian, K (2017) Process evaluation of AOD stainless steel making in Salem Steel Plant, SAIL. Journal of Metallurgy and Materials Science, 59(4) . pp. 173-180.

Assis, R M and Lima, J A and Assis, Paulo Santos and Schultz, Atila (2000) Use of metallurgical silicon carbide by producing steels and use in the cupola furnace. Journal of Metallurgy and materials Science, 42 (4). pp. 279-281.

Aush, S C and Sinha, P K and Sengupta, P L (1991) Production of Activated Manganese Dioxide. NML Technical Journal, 33 (3-4). pp. 24-29.

Aush, S C and Sinha, P K and Sengupta, P L (1990) Production of Electrolytic and Activated Manganese Dioxide Simultaneously From a Single Flow Sheet. NML Technical Journal, 32 (1-4). pp. 40-46.

Babu, M Nani and Sahu, K K and Pandey, B D (2002) Zinc recovery from sphalerite concentrate by direct oxidative leaching with ammonium, sodium and potassium persulphates. Hydrometallurgy, 64 (2). pp. 119-129.

Babu, M Nani and Sahu, K K and Pandey, B D and Mankhand, T R (2004) Kinetics of leaching of zinc from sphalerite concentrate with sodium persulphate. Canadian Metallurgical Quarterly , 43 (3). pp. 321-328.

Backer de, M C C (1970) CNRM-The Belgian National Metallurgical Research Centre. NML Technical Journal, 12 (4). pp. 111-113.

Badhirappan, G P and Nallasivam, V and Varadarajan, M and Leobeemrao, V P and Bose , S and Venugopal, E and Rajendran, S and Angleo, P C (2018) Phase Competition Induced Bio-Electrochemical Resistance and Bio-Compatibility Effect in Nanocrystalline Zr-x-Cu100-x Thin Films. Journal of nano science and nanotechnology , 18(7) (IF-1.483). pp. 4534-4543.

Bagchi, M and Akerkar, D D (1977) Selective separation and extraction of nickel from ammoniacal leach liquors using a chelating agent. Transactions of the Indian Institute of metals, 30 (3). pp. 177-179.

Bagui, S and Murugesan, A P and Poddar, Palash (2019) Creep Behavior of As-Cast Mg-10 wt.%Sn and Mg-10 wt.%Sn-3 wt.%Al-1 wt.%Zn Alloys: A Comparative Study. Journal of Materials and Performance, 28(12) . pp. 7616-7628.

Bagui, S and Ray, Ashok K and Sahu, J K and Parida, N and Swaminathan, J and Tamilselvi, M and Mannan, S L (2013) Influence of Saline Environment on creep rupture life of Nimonic-263 for marine turbine application. Material Science and Engineering A-Stuctural Materials properties Microstructure and processing, 566 (IF-2.003). pp. 54-60.

Bagui, S and Sahu, B P and Laha, K and Tarafder, Soumitra and Mitra, R (2021) Creep Deformation Behavior of Inconel 617 Alloy in the Temperature Range of 650 degrees C to 800 degrees C. Metallurgical and materials transactions A-physical metallurgy and materials science, 52(1) . pp. 94-107.

Bagui, S and Sahu, B P and Mahato, B and Mandal, M and Tarafder, Soumitra and Mitra, R (2022) Effect of Microstructural Evolution on Creep and Rupture Behavior of Inconel 617 Alloy. Journal of Materials Engineering and Performance .

Bagui, Sumanta and Laha, K and Mitra, R and Tarafder, S (2018) Accelerated creep behavior of Nb and Cu added 18Cr-8Ni austenitic stainless steel. Materials Research Express, 5 . p. 116515.

Bagui, Sumanta and Mandal, M and Sahoo, Biraj K and Laha, K and Tarafder, Soumitra and Mitra, R (2022) Investigation of non-classical creep behavior of Inconel 617 alloy at 700 degrees C and 800 degrees C through interrupted tests and microstructural characterizations. Materials Science and Engineering A, 832 .

Bahadur, Aruna (1996) Aluminum coatings for steel. Materials and Manufacturing Processes, 11 (2). pp. 225-232.

Bahadur, Aruna (1987) Behavior of Al-Mg alloys at high-temperature. Journal of Materials Science, 22 (6). pp. 1941-1944.

Bahadur, Aruna (1992) Chromates as Corrosion Inhibitors for Aqueous Systems. Corrosion Reviews, 10 (1-2). pp. 155-178.

Bahadur, Aruna (1981) Dendritic cell-size - its growing importance. Transactions of the Indian Institute of metals, 34 (3). pp. 229-233.

Bahadur, Aruna (1998) Development and evaluation of a low chromate corrosion inhibitor for cooling water systems. Canadian Metallurgical Quarterly, 37 (5). pp. 459-468.

Bahadur, Aruna (1993) Effect of ph on corrosion inhibition of mild-steel by chromates. Materials Transactions JIM, 34 (12). pp. 1191-1194.

Bahadur, Aruna (2003) Enhancement of high temperature strength and room temperature ductility of iron aluminides by alloying. Materials Science and Technology, 19 (12). pp. 1627-1634.

Bahadur, Aruna (1988) Intermetallic phases in Al-Mn alloys. Journal of materials science, 23 (1). pp. 48-54.

Bahadur, Aruna (1996) Low chromate corrosion inhibitor with borate and hexametaphosphate. Materials Transactions JIM, 37 (4). pp. 605-611.

Bahadur, Aruna (1998) Partial substitution of chromate by borate for cooling water inhibition. ISIJ International, 38 (5). pp. 469-473.

Bahadur, Aruna (1985) Radio isotopes as a tool in metallurgical research and industry. Transactions of the Indian Institute of metals, 38 (4). pp. 301-308.

Bahadur, Aruna (1998) Study of Film Growth on Copper in Chromate Solution by a Radioactive Tracer Technique. Journal of Materials Science Letters, 17 (8). pp. 701-704.

Bahadur, Aruna and Kumar, Rajendra (1972) A study of solidification of aluminum and aluminum-copper alloys by anodic oxidation technique. Metallography, 5 (3). pp. 275-284.

Bahadur, Aruna and Maji, K D and Kumar, Rajendra (1975) Analysis of alloys and salt solutions by β-ray backscattering. Journal of Applied Chemistry and Biotechnology, 25 (7). pp. 515-522.

Bahadur, Aruna and Maji, K D and Kumar, Rajendra (1975) Analysis of alloys and salt-solutions by beta-ray backscattering. Journal of applied chemistry and biotechnology, 25 (7). pp. 515-522.

Bahadur, Aruna and Mitra, A and Ravi Kumar, B and Palit Sagar, S (2007) Evaluation and Correlation of Residual Stress Measurement in Steel. Evaluation and Correlation of Residual Stress Measurement in Steel , 26 (2-4). pp. 47-55.

Bahadur, Aruna and Mohanty, O N (1995) Aluminum diffusion coatings on medium-carbon steel. Materials Transactions JIM, 36 (9). pp. 1170-1175.

Bahadur, Aruna and Mohanty, O N (1991) The Development of FE-AL Intermetallics. Journal of Materials Science, 26 (10). pp. 2685-2693.

Bahadur, Aruna and Mohanty, O N (1990) Structural studies of calorized coatings on mild-steel. Materials Transactions JIM, 31 (11). pp. 948-953.

Bahadur, Aruna and Mohanty, O N (1991) Structural studies of hot dip aluminized coatings on mild-steel. Materials Transactions JIM, 32 (11). pp. 1053-1061.

Bahadur, Aruna and Mohanty, O N (1994) Structure-property correlation in aluminized coatings. NML Technical Journal, 36 (1). pp. 31-38.

Bahadur, Aruna and Prasad, R S (1992) Anodic etching technique for observation of microstructural change during the solidification and precipitation process in al-cu alloy. Journal of Materials Science Letters, 11 (20). pp. 1349-1352.

Bahadur, Aruna and Ravi Kumar, B and Ghosh Chowdhury, S (2003) Effect of Thermomechanical Treatment on X-Ray Elastic Constants and Residual Stresses in HSLA-100 Steel. Journal of Nondestructive Evaluation, 22 (2). pp. 53-62.

Bahadur, Aruna and Ravi Kumar, B and Kumar, A Seshu and Sarkar, G G and Rao, J S (2004) Development and comparison of residual stress measurement on welds by various methods. Materials Science and Technology, 20 (2). pp. 261-269.

Bahadur, Aruna and Ravi Kumar, B and Mohanty, O N (1995) Ductility improvement in iron aluminides. Journal of Materials Science, 30 (14). pp. 3690-3696.

Bahadur, Aruna and Sharma, T L and Parida , N and Mukherjee, A N and Mohanty, O N (1993) Structure-property correlation in al-diffusion coated steels. Journal of Materials Science, 28 (19). pp. 5375-5381.

Baidya, B K and Kumar, Sanjay and Bhat, K L (1997) Extraction of manganese from manganese and iron sea nodules. NML Technical Journal, 39 (3). pp. 177-181.

Bakshi, S Das and Sinha, D and Ghosh Chowdhury, S and Mahashabde, V V (2018) Anisotropic broadening of XRD peaks of α′-Fe: Williamson-Hall and Warren-Averbach analysis using full width at half maximum (FWHM) and integral breadth (IB). Materials Characterization, 142 (IF-3.220). pp. 144-153.

Bakshi, S Das and Sinha, D and Ghosh Chowdhury, S and Mahashabde, V V (2018) Surface and sub-surface damage of 0.20 wt% C-martensite during three-body abrasion. Wear, 394–395 (IF-2.531). pp. 217-227.

Balani, K (2020) An opinion on hydroxyapatite based bio-composites as bone-scaffolds. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 13-19.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2003) Electroless Ni–P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2006) Structure and phase transformation behaviour of electroless Ni–P composite coatings. Materials Research Bulletin, 41 (4). pp. 847-860.

Balasubramani, N and Srinivasan, A and Pillai, U T S and Pal, B C (2007) Effect of Pb and Sb additions on the precipitation kinetics of AZ91 magnesium alloy. Materials Science and Engineering A, 457 (1-2). pp. 275-281.

Balasubramani, N and Srinivasan, A and Pillai, U T S and Raghukandan, K and Pal, B C (2008) Effect of antimony addition on the microstructure and mechanical properties of ZA84 magnesium alloy. Journal of Alloys and Compounds, 455 (1-2). pp. 168-173.

Balasubramani, N and Suresh, M and Srinivasan, A and Pillai, U T S (2007) Observation of the suppression of Mg17Al12 formation in a La-containing AZ91 alloy. Journal of Materials Science, 42 (19). pp. 8374-8376.

Balasubramaniam, R (1999) Delhi iron pillar rust characterization by x-ray diffraction analysis. NML Technical Journal, 40 (1). pp. 12-20.

Balasubramaniam , R (1995) Studies on the Corrosion resistance of Delhi Iron Pillar. NML Technical Journal, 37 (4). pp. 123-142.

Balasubramanian, K J and Bhaskar Raju, G and Khangaonkar, P R (1990) Flocculation of iron ores using magnafloc polymers. Ind. Min. and Engg. Journal, July . pp. 7-13.

Balasundaram, L J (1969) On the variation of saturation induction and expansion coefficients of iron with temperature. NML Technical Journal, 11 (1). p. 36.

Balasundaram, L J and Sinha, A N (1971) Thermal Expansion of Lead‐Tin and Lead‐Cadmium Alloys. Journal of Applied Physics, 42 . p. 5207.

Balaz, Peter and Achimovičová, M and Baláž, Matej and Billik, Peter and Cherkezova-Zheleva, Zara and Criado, José Manuel and Delogu, Francesco and Dutková, Erika and Gaffet, Eric and José Gotor, Francisco and Kumar, Rakesh and Mitov, Ivan and Rojac, Tadej and Senna, Mamoru and Streletskii, Andrey and Wieczorek-Ciurowa, Krystyna (2013) Hallmarks of mechanochemistry: from nanoparticles to technology. Chemical Society Reviews, First published on the web 04 Apr 2013 (IF-28.76). pp. 1-67.

Baldevraj, and Mudali, U Kamachi and Jayakumar, T (2004) R&D Challenges in the Technology of Fast Breeder Reactors for Energy Security in the Country. The excerpts of the lecture delivered by Dr. Baldev Raj . pp. 105-146.

Balon, R and Poos, A (1963) Experience with a hundred percent pellet burden and a low slag volume. NML Technical Journal, 5 (2). pp. 17-24.

Balusamy, T and Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Corrosion resistant Ti alloy for sulphuric acid medium: Suitability of Ti–Mo alloys. Materials and Corrosion, 62 (1.173 (SCI)). pp. 803-806.

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Lee, Min Ho and Nishimura, T (2015) Surface Nanocrystallization of EN8 Steel: Correlation of Change in Material Characteristics with Corrosion Behavior. Journal of The Electrochemical Society (JES), 162(6) (IF-2.859). c285-c293.

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Park, Song and Lee, Min Ho (2013) Effect of surface mechanical attrition treatment (SMAT) on pack boronizing of AISI 304 stainless steel. Surface and Coatings Technology, 232 (IF-1.941). pp. 60-67.

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Park, Song and Lee, Min Ho (2013) Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel. Corrosion Science, 74 (IF-3.615). pp. 332-344.

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Park, Song and Lee, Min Ho (2013) Pack boronizing of AISI H11 tool steel: Role of surface mechanical attrition treatment. Vacuum, 97 (IF-1.530). pp. 36-43.

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Park, Song and Lee, Min Ho (2013) Plasma nitriding of AISI 304 stainless steel: Role of surface mechanical attrition treatment. Materials Characterization, 85 (IF-1.880). pp. 38-47.

Balusamy, T and Satendra, Kumar and Sankara Narayanan, T S N (2010) Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel. Corrosion Science, 52 . pp. 3826-3834.

Balusamy, T and Satendra , Kumar and Sankara Narayanan, T S N (2011) Electrochemical behaviour of surface modified AISI 304 grade stainless steel in ringer’s solution. Transactions of the Indian Institute of Metals, 64 (4-5). pp. 507-511.

Balusamy, T and Venkateswarlu, M and Murthy, K S N and Vijayanand, S and Sankara Narayanan, T S N (2014) Effect of Surface Mechanical Attrition Treatment (SMAT) on the Surface and Electrochemical Characteristics of Pb-Sn Alloy. International Journal of Electrochemical Science, 9(1) (IF-1.956). pp. 96-108.

Bandopadhyay, A (1998) Salient features of air pollution control technology in cupola furnaces. NML Technical Journal, 40 (3). pp. 69-76.

Bandopadhyay, A and Ganguly, Amit and Gupta, K N (1996) Investigations on the anomalous oxidation behaviour of high-carbon gas-based direct reduced iron (DRI). Thermochimica Acta, 276 . pp. 199-207.

Bandopadhyay, A and Ghoshal, T K and Singh, K K and Ramachandrarao, P (2000) Pollution prevention and control in metallurgical furnace -current status and strategies for cleaner environment. Journal of Metallurgy and materials Science, 42 (1). pp. 1-9.

Bandopadhyay, A and Kumar , Sanjay and Das, S K and Singh, K K (1999) In the Pursuit of Waste free Metallurgy. NML Technical Journal, 41 (4). pp. 143-162.

Bandopadhyay, A and Majumdar, S K and Ghoshal, T K and Singh, K K and Ramachandrarao, P (1996) Investigations on the nature of pollution created by secondary re-rolling mills. NML Technical Journal, 38 (1). pp. 25-30.

Bandyopadhyay, D and Chakravorty, N (1993) A study on the kinetics of iron-oxide reduction by solid carbon. Steel Research, 64 (7). pp. 340-345.

Bandyopadhyay, D and Ghosh, Arindam (1996) Validity of rate equation based on Langmuir-Hinshelwood mechanism for gasification of carbon - A reappraisal. Steel Research, 67 (3). pp. 79-86.

Bandyopadhyay, D and Pathak, L C and Mukherjee, I and Das, S K and Ganguly, R G and Ramachandrarao, P (1997) Fabrication of Al2O3-SiCw in situ composite through a new combustion technique. Materials Research Bulletin, 32 (1). pp. 75-82.

Bandyopadhyay, D and Singh, S D and Sanyal, D and Singh, K N (2003) A study on dissolution kinetics of carbon in liquid iron bath. Chemical Engineering Journal, 94 (2). pp. 79-92.

Bandyopadhyay, G K and Rao, T C (1972) Application of statistics in Mineral Engineering. NML Technical Journal, 14 (2). pp. 37-43.

Bandyopadhyay , N R (2019) Efficiency enhancement of crystalline silicon solar cells by coating with luminescent silicon nanostructures. Journal of Metallurgy and Materials Science, 61(3) . pp. 135-141.

Banerjee, A and Sahu, J K and Paulose, N and Fernando, C D and Ghosh, R N (2016) Micromechanism of cyclic plastic deformation of alloy IN 718 at 600°C. Fatigue & Fracture Of Engineering Materials And Structures, 39(7) (IF-2.335). pp. 877-885.

Banerjee, Amit and Mishra, P R and Mohanty, Ashok and Chakravarty, K and Das Biswas, Rupa and Sahu, Rina and Chakravarty, S (2016) Distribution of mineral species in different coal seams of Talcher coalfield and its transformation behavior at varying temperatures. International Journal of Coal Science & Technology, 3(2) (SNIP-3.554). pp. 97-103.

Banerjee, G and Pal, T K and Das, Goutam (2009) Performance Evaluation of Resistance Spot Welded Interstitial Free Steel Under Cryogenic Conditions. Journal of Testing And Evaluation, 37 (6). pp. 566-572.

Banerjee, K and Roy, Nilima and Ghosh, R N and Chatterjee, U S (2004) Strain rate dependence of plastic flow behaviour of HSLA-100 steel in seawater during cathodic charging of hydrogen. Transactions of the Indian Institute of Metals, 57 (6). pp. 611-616.

Banerjee, Kalyani (1961) Some problems of documentation in scientific research. NML Technical Journal, 3 (2). pp. 13-18.

Banerjee, M K and Mukherjee, A N and Mukherjee, K P (1990) Potentiokinetic Behaviour of Copper and Manganese Bearing Stainless Steels. NML Technical Journal, 32 (1-4). pp. 11-17.

Banerjee, M K and Mukherjee, A N and Pandey, J L and Bhattamishra, A K (1991) Studies on Active-Passive Transition behaviour of Stainless Steels. NML Technical Journal, 33 (3-4). pp. 10-17.

Banerjee, M K and Singh, Inder and Nag, P S and Mukherjee, K P (1994) Effect of cold deformation and hydrogen charging on ttf and hardness of 0.1 c steel. Anti-corrosion methods and materials, 41 (2). pp. 10-12.

Banerjee, N G (1959) Determination of gases in metals and alloys by vacuum technique. NML Technical Journal, 1 (4). pp. 28-33.

Banerjee, N G (1960) Fabrication and working of the vacuum fusion apparatus for the determination of gases in metals and alloys. NML Technical Journal, 2 (4). pp. 10-14.

Banerjee, N G (1959) Vacuum determination of hydrogen in steel. NML Technical Journal, 1 (3). pp. 17-21.

Banerjee, Prasun and Ghosh, Gautam and Biswas, Salil K (2010) Measurement of dielectric properties of medium loss samples at X-band frequencies. Journal of Metallurgy and Materials Science, 52 (3). pp. 247-255.

Banerjee, Riya and Chakladar, S and Chattopadhyay, S K and Chakravarty, S (2023) Leaching of rare earth elements from coal ash using low molecular weight organocarboxylic acids: Complexation overview and kinetic evaluation. International Journal of Chemical Kinetics .

Banerjee, Riya and Chakladar, S and Mohanty, Ashok and Chattopadhyay, S K and Kumar, S and Chakravarty, S (2022) Leaching characteristics of rare earth elements from coal ash using organosulphonic acids. Minerals Engineering, 185 .

Banerjee, Riya and Mohanty, A and Chakravarty, S and Chakladar, S and Biswas, P (2021) A single-step process to leach out rare earth elements from coal ash using organic carboxylic acids. Hydrometallurgy, 201 .

Banerjee, S K and Narayanan, P I A (1959) Processing of Magnetite Ores with particular reference to Salem Magnetite. NML Technical Journal, 1 (2). pp. 23-27.

Banerjee, T (1967) An outline of research and development work at the National Metallurgical Laboratory on non-ferrous metallurgy. NML Technical Journal, 95 (2). pp. 4-11.

Banerjee, T (1968) Research and development work at the National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 17-20.

Banerjee, T (1966) Role of National Metallurgical Laboratory in corrosion research. NML Technical Journal, 8 (4). pp. 5-10.

Banerjee, T (1959) Structure of Electrolytic Alloys. NML Technical Journal, 1 (2). pp. 15-22.

Banerjee, T (1966) Substitution of scarce non-ferrous metals. NML Technical Journal, 8 (2). pp. 4-9.

Banerjee, T (1969) Theory on mechanism of phase-transformation in electrolytic alloys. NML Technical Journal, 11 (1). pp. 4-5.

Banerjee, T (1968) Welcome address. NML Technical Journal, 10 (3). pp. 5-7.

Banerjee, T and Mishra, G (2000) Cathodic protection - A proven corrosion control means in immersed or buried pipelines in oil,natural gas and Petrochemical Industries. Journal of Metallurgy and materials Science, 42 (3). pp. 167-176.

Bansal, A and Sinha, Arvind (2012) Dehydration driven changes in the structure and mechanical behavior of electrospun poly (vinyl alcohol) nanofibers. Materials Science and Engineering: C, 32 (3). pp. 587-593.

Bansal, G K and Chandan, A K and Ghosh, C and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2021) The Pros and Cons of an Energy-Efficient Q&P Approach to Develop Advanced Steels. Next Generation Materials and Processing Technologies, Part of the Springer Proceedings in Materials book series (SPM, volume 9) . pp. 15-26.

Bansal, G K and Chandan, A K and Mandal, G K and Srivastava, V C (2020) High Entropy Alloys: An Overview on Current Developments" in the book "High Entropy Alloys: Innovations, Advances, and Applications. High Entropy Alloys: Innovations, Advances, and Applications (Book). pp. 1-68.

Bansal, G K and Chandan, A K and Srivastava, V C and Gopalakrishna, K and Das, Goutam and Rajkumar, S and Ghosh Chowdhury, S and Tarafder, S (2021) Studies on Tensile Behaviour of Selective Laser Melted 316L Stainless Steel Using SEM Straining Stage. Transactions of the Indian National Academy of Engineering . pp. 1-11.

Bansal, G K and Ghosh, C and Rajinikanth, V and Ghosh Chowdhury, S (2021) Effect of Finish Rolling Temperature on Microstructure and Mechanical Properties of Low-Si Steel After Quenching and Nonisothermal Partitioning. Transactions of the Indian Institute of Metals .

Bansal, G K and Jena, P S M and Ghosh, C and Srivastava, V C and Rajnikanth, V and Dutta, Monojit and Ghosh Chowdhury, S (2020) Quench Temperature-Dependent Mechanical Properties During Nonisothermal Partitioning. Metallurgical and Materials Transactions A, 51A (IF-2.050). pp. 5088-5100.

Bansal, G K and Junior, L P and Ghosh, C and Rajnikanth, V and Tripathy, S and Srivastava, V C and Bhagat, A N and Chowdhury, S G (2020) Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials, 51(7) (IF-2.050). pp. 3410-3224.

Bansal, G K and Madhukar, D A and Chandan, A.K. and Ashok, K and Mandal, G K and Srivastava, V C (2018) On the intercritical annealing parameters and ensuing mechanical properties of low-carbon medium-Mn steel. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 733 (IF-4.081). pp. 246-256.

Bansal, G K and Pradeep, M and Ghosh, C and Rajnikanth, V and Srivastava, V C and Bhagat, A N and Kundu, S (2019) Evolution of Microstructure in a Low-Si Micro-alloyed Steel Processed Through One-Step Quenching and Partitioning. Metallurgical and Materials Transactions A , 50(2) (IF-1.985). pp. 547-555.

Bansal, G K and Rajnikanth, V and Ghosh, C and Srivastava, V C and Kundu, S and Ghosh Chowdhury, S (2018) Microstructure–Property Correlation in Low-Si Steel Processed Through Quenching and Nonisothermal Partitioning. Metallurgical and Materials Transactions A, 49(8) (IF-1.985). pp. 3501-3514.

Bansal, G K and Rajnikanth, V and Ghosh, Chiradeep and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2020) Effect of cooling rate on the evolution of microstructure and mechanical properties of nonisothermally partitioned steels. Materials Science and Engineering: A, 788 (IF-4.652). p. 139614.

Bansal, G K and Sahoo, Biraj and Chandan, A K (2020) Metallurgical Perspective on Quench and Partitioned Advanced High Strength Steels. Steel Tech, 14(4) (NonSCI). pp. 60-64.

Bansal, G K and Srivastava, V C and Ghosh Chowdhury, S (2019) Role of solute Nb in altering phase transformations during continuous cooling of a low-carbon steel. Materials Science and Engineering: A, 767 (IF-4.081). p. 138416.

Bansal, G K and Tripathy, S and Chandan, A K and Rajinikanth, V and Ghosh, C and Srivastava, V C and Chowdhury, S G (2021) Influence of quenching strategy on phase transformation and mechanical properties of low alloy steel. Materials Science and Engineering: A, 826, article no. 141937 (5.23). pp. 1-15.

Bansal, Rajesh and Singh, J K and Singh, D D N (2013) Deleterious effects of nicotine containing dentifrices on human saliva and teeth: A novel study. Indian Journal of Dentistry, 4(1) . pp. 22-28.

Bansal, Rajesh and Singh, J K and Singh, Vakil and Singh, S D and Das, Parimal (2017) Optimization of Oxidation Temperature for Commercially Pure Titanium to Achieve Improved Corrosion Resistance. Journal Of Materials Engineering And Performance, 26(3) (IF-1.331). pp. 969-977.

Bar, H N and Dayal, V and Barnard, D and Hsu, D K (2010) Plate Wave Resonance with Air-Coupled Ultrasonics. Review of Progress in Quantitative Nondestructive Evaluation, 29A 29B (1211). pp. 1069-1076.

Bar, H N and Sivaprasad, S and Narasaiah, N and Paul, S K and Sen, B N and Chandra, Sanjay (2013) Low Cycle and Ratchetting Fatigue Behavior of High UTS/YS Ratio Reinforcing Steel Bars. Journal of Materials Engineering and Performance, 22(6) (IF- 0.92). pp. 1701-1707.

Baral, J and Swaminathan, J and Chakrabarti, D and Ghosh, R N (2017) Effect of welding on creep damage evolution in P91B steel. Journal of Nuclear Materials, 490 (IF-2.048). pp. 333-343.

Baral, Jayashree and Swaminathan, J and Chakrabarti, D and Ghosh, R N (2015) Creep behavior of P91B steel in the presence of a weld joint. Materials Science and Engineering A, 631 (IF-2.409). pp. 220-229.

Baral, Jayashree and Swaminathan, J and Ghosh, R N (2013) Creep Behaviour of 9CrMoNbV (P91) Steel having a Small Amount of Boron. Procedia Engineering, 55 . pp. 88-92.

Barat, K and Bar, H N and Mandal, D and Roy, H and Sivaprasad, S and Tarafder, S (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science and Engineering A, 597 (IF-2.409). pp. 37-47.

Barat, K and Das, Goutam and Bharathy, S and Ghosh, M (2019) Compositional Optimization of a Commercially Produced Ferritic Steel Using Microstructural Heterogeneity and Mechanical Properties. Materials Performance & Characterization .

Barat, K and Ghosh, M and Sivaprasad, S and Kar, S K and Tarafder, S (2018) High-Temperature Low-Cycle Fatigue Behavior in HAYNES 282: Influence of Initial Microstructure. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49(10) (IF-1.985). pp. 5211-5226.

Barat, K and Metya, A and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2015) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204.

Barat, K and Sivaprasad, S and Kar, S and Tarafder, S (2018) Creep Fatigue Interaction under Different Test Variables: Mechanics and Mechanisms. Journal of Testing and Evaluation (IF-0.389). pp. 1-20.

Barat, K and Sivaprasad, S and Kar, S K and Tarafder, S (2019) Low‐cycle fatigue of IN 718: Effect of waveform. Fatigue & Fracture Of Engineering Materials And Structures . pp. 1-10.

Barat, Kaustav and Metya, Avijit Kumar and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2014) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204.

Barat, Kaustav and Sivaprasad, S and Kar, Sujoy Kumar and Tarafder, S (2020) A novel rate based methodology for creep fatigue life estimation of superalloys. International Journal of Pressure Vessels and Piping, 182 (IF-2.230). p. 104064.

Bardgett, W E (1961) Research in the metallurgical industry. NML Technical Journal, 3 (3). pp. 4-14.

Bardgett, W E and Stanners, J F (1963) The Delhi Pillar-A study of the Corrosion Aspects. NML Technical Journal, 5 (1). pp. 24-30.

Barman, H and Hamada, A S and Sahu, T and Mahato, B and Talonen, J and Shee, S K and Sahu, Puspendu and Porter, D A and Karjalainen, L P (2014) A Stacking Fault Energy Perspective into the Uniaxial Tensile Deformation Behavior and Microstructure of a Cr-Mn Austenitic Steel. Metallurgical and Materials Transaction A, 45A(4) (IF-1.730). pp. 1937-1952.

Barman, S R and Chakrabarti, Aparna and Singh, Sanjay and Banik, S and Bhardwaj, S and Paulose, P L and Chalke, B A and Panda, A K and Mitra, A and Awasthi, A M (2008) Theoretical prediction and experimental study of a ferromagnetic shape memory alloy: Ga2MnNi. Physical Review B (PRB), 78 (13). pp. 1-6.

Baruah, B P and Khare, Puja and Dutta, D K and Dutta, N N (2010) Nagaland coals: suitability as an energy source. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 64-68.

Basak, A C and Ghosh, K C and Paul, A R and Bhattacharjee, S and Pandey, L P (1995) A review on thiocyanate methods for the estimation of molybdenum by molecular absorption spectroscopy. Talanta, 42 (4). pp. 497-506.

Basak, A C and Ghosh, K C and Sircar, J K and Paul, A R and Pandey, L P and Bhattacharjee, S (1996) A Sensitive Method for the Determination of Silicon by Molecular Absorption Spectroscopy. Microchemical Journal, 54 (1). pp. 48-53.

Basak, G (1980) Distillation of zinc .2. Studies on lead content in distilled zinc dust. Transactions of the Indian Institute of metals, 33 (4). pp. 327-328.

Basak, P and Dev, S C and Dubey, R K (1986) Process parameters in the development of Ag-AgCdO composites-Study and standardisation. NML Technical Journal, 28 (1-4). pp. 30-36.

Basanth Kumar, K and Saxena, Kuldeep K and Dey, Suhash R and Pancholi, Vivek and Bhattacharjee, A (2016) Microstructural evolution in hot compressed TiHy 600 titanium alloy. Journal of Metallurgy and Materials Science, 58(3) (IF 0.04). pp. 147-152.

Basariya, M R and Roy, Rajat K and Pramanick, A K and Srivastava, V C and Mukhopadhyay, N K (2015) Structural transition and softening in Al-Fe intermetallic compounds induced by high energy ball milling. Materials science and engineering a-structural materials properties microstructure and processing, 638 (IF-2.567). pp. 282-288.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Comparative Studies on Al-Based Composite Powder Reinforced with Nano Garnet and Multi-wall Carbon Nanotubes. Journal of Materials Engineering and Performance, 24(11) (IF-0.998). pp. 4200-4205.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Effect of Milling Time on Structural Evolution and Mechanical Properties of Garnet Reinforced EN AW6082 Composites. Metallurgical and Materials Transaction A, 46A(3) (IF-1.730). pp. 1360-1373.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2016) Inverse Hall-Petch like behaviour in a mechanically milled nanocrystalline Al5Fe2 intermetallic phase. Philosophical Magzine, 96(23) (IF-1.350). pp. 2445-2456.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2014) Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling. Materials & Design, 64 (IF-3.171). pp. 542-549.

Basavaraja, C (2015) Microwave absorption studies of polyaniline nanocomposites containing Poly (2-acrylamido-2- methyl-1-propanesulfonicacid)/graphene nanoplatelet. Journal of Metallurgy and Materials Science, 57(3) . pp. 135-141.

Basavaraja, C (2015) Partially degradable electrically conductive poly (3,4-ethylenedioxy-thiophene)/sigma cellulose polymer composites. Journal of Metallurgy and Materials Science, 57(4) . pp. 251-255.

Basavaraja, C and Kumar, K B Satish and Vishnuvardhan, T K (2014) Hony comb patterns and DC conductivity of cellulose multiwalled carbon nanotube composite films. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 209-215.

Basavaraja, C and Prasad, R and Shankara, B S and Shashidhar, (2012) Studies on surface morphology and thermal stability of polypyrrole-poly (e-caprolactone) polymer composites. Journal of Metallurgy and Materials Science, 54(3) . pp. 187-195.

Baskaran, Irusen and Sakthi Kumar, R and Sankara Narayanan, T S N and Stephen, A (2006) Formation of electroless Ni–B coatings using low temperature bath and evaluation of their characteristic properties. Surface and Coatings Technology, 200 (24). pp. 6888-6894.

Baskaran, Irusen and Sankara Narayanan, T S N and Seshadri, S K (2001) Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy. Journal of Solid State Electrochemistry, 5 (5). pp. 334-338.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2009) Corrosion resistance of electroless Ni–low B coatings. Transactions of the Institute of Metal Finishing, 87 (4). pp. 221-224.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2006) Effect of accelerators and stabilizers on the formation and characteristics of electroless Ni–P deposits. Materials Chemistry and Physics, 99 (1). pp. 117-126.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2006) Pulsed electrodeposition of nanocrystalline Cu–Ni alloy films and evaluation of their characteristic properties. Materials Letters, 60 (16). pp. 1990-1995.

Basoalto, H C and Ardakani, M and Ghosh, R N and Mclean, M (2002) Multiaxial lifetime predictions of single-crystal superalloys: Use of reference stresses. Materials and Manufacturing Processes, 17 (4 (Special Issue)). pp. 519-528.

Basu, A and Majumdar, J Dutta and Ghosh Chowdhury, S and AjiKumar, P K and Tyagi, A K and Baldevraj, and Manna, I (2007) Microstructural and texture studies of gas-nitrided Cr-coated low-alloy high-carbon steel. Surface and Coatings Technology, 201 (16-17). pp. 6985-6992.

Basu, D K and Bhattacharjee, A K and Singh, M N (2000) Some observations on environmental corrosion behaviour and electrochemical passivation characteristic of silver-cadmium contact alloys in neutral - saline and alkaline - sour media. Journal of Metallurgy and materials Science., 42 (2). pp. 121-131.

Basu, D K and Bhattamishra, A K and Dev, S C and Singh, Inder (1995) Studies on corrosion behavior of Cu-Si alloys in sulfide and chloride media. Anti-corrosion Methods & Materials, 42 (5). pp. 14-16.

Basu, D K and Khan, D K (1972) Short communication on role of different variables on atmospheric corrosion in marine environment-Effect of proximity to sea. NML Technical Journal, 14 (1). pp. 34-36.

Basu, D K and Singh, M N and Dev, S C and Sivaramakrishnan, C S (2000) Corrosion of silver-containing brazing fillers and contact materials in different conditions. Corrosion Prevention & Control, 47 (3). 77-+.

Basu, G and Mukherjee, J K and Banerjee, T (1970) Phase transformations in thermal copper-tin alloys. NML Technical Journal, 12 (2). pp. 53-60.

Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N (1972) Utilization of zinc ash for production of electrolytic zinc. NML Technical Journal, 14 (3). pp. 102-104.

Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N and Altekar, V A (1976) Recovery of elemental sulphur and copper values from chalcopyrite concentrates by direct leaching in ferric chloride solution. NML Technical Journal, 18 (3). pp. 29-33.

Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N and Altekar, V A (1973) Utilization of secondary zinc. NML Technical Journal, 15 (3). pp. 49-58.

Basu, Projjal and Sarkar, S B and Ray, H S (1989) Isothermal reduction of coal mixed iron-oxide pellets. Transactions of The Indian Institute of Metals, 42 (2). pp. 165-172.

Basu, T S and Ray, Mallar and Bandopadhyay, N R and Pramanick, A K and Hossain, S M (2013) Performance Enhancement of Crystalline Silicon Solar Cells by Coating with Luminescent Silicon Nanostructures. Journal of Electronic materials, 42(3) (IF-1.9). pp. 403-409.

Bawkar, Shilpa Kalamani and Jha, Manis K and Choubey, Pankaj K and Parween, Rukshana and Panda, Rekha and Singh, Pramod Kumar and Lee, Jae-chun (2022) Application of Environmental Friendly Bio-adsorbent based on a Plant Root for Copper Recovery Compared to the Synthetic Resin. Resources Recycling .

Beato-lopez, J J and De la cruz blas, Ca and Mitra, Amitava and Gomez-polo, C (2016) Electrical model of giant magnetoimpedance sensors based on continued fractions. Sensors and Actuators A - Physical, 242 (IF-2.499). pp. 73-78.

Beck, T A and Bhandary, V S and Gupte, P K (1966) Study on the suitability of cellulose materials as core binders. NML Technical Journal, 8 (3). pp. 4-10.

Beck, T A and Mohan, Jatinder and Gupte, P K (1963) Effect of copper on the annealing of white iron. NML Technical Journal, 5 (4). pp. 11-16.

Beck, T A and Rao, G N and Altekar, V A (1979) Effect of additives on hot strength retained strength and breakdown properties of sodium silicate bonded sands. NML Technical Journal, 21 (1-2). pp. 6-10.

Bedre, Mahesh D and Basavaraja, S and Deshpande, Raghunandan and Sawle, Balaji D and Lagashetty, Arun Kumar and Govindraj, B and Venkataraman, A (2010) Preparation and characterization of polyaniline-NiO nanocomposites via interfacial polymerization. Journal of Metallurgy and Materials Science, 52 (2). pp. 149-154.

Bedre, Mahesh D and Raghunandan, D and Basavaraja, S and Balaji, D S and Lagashetty, Arun Kumar and Venkataraman, A (2010) Preparation and characterization of Magnetic Fe3O4 nanoparticles. Journal of Metallurgy and Materials Science, 52 (3). pp. 209-214.

Beena, Kumari and Sangeeta, sahney and Madhukar, A and Chattoraj, I and Sinni, Shipra (2015) Involvement and productivity of research and development workers: A case study of a publicly-funded research laboratory. International Journal of Productivity and Performance Management (previously Work Study), 64(4) . 567 - 589.

Behari, M (1997) Global scenario of magnesium metal. NML Technical Journal, 39 (3). pp. 105-115.

Behera, R K and Rout, K and Das, N N (2010) Mineralogical characterization and sorption properties of goethite rich iron ore from daitari, Orissa, India. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), I . pp. 16-23.

Behera, R K and Rout, K and Nayak, B and Das, N N (2012) Removal of Selenium and Arsenic Oxyanions using Natural Goethite-Rich Iron Ore from Daitari, Orissa, India: Effect of Heat Treatment. Adsorption Science & Technology, 30(10) (IF-0.559). pp. 867-880.

Behera, R K and Satapathy, P K and Randhawa, N S and Das, N N (2010) Adsorptive Removal of Phosphate Ions Using Leached Sea Nodule Residue Generated by the Reduction–Roasting Ammoniacal Leaching Process. Adsorption Science & Technology, 28 (7). pp. 611-627.

Behera, R K and Swain, S K and Sen, S and Mishra, S C (2012) Property prediction of ductile iron : Artificial neural network approach. Journal of Metallurgy and Materials Science,, 54(3) . pp. 197-202.

Behera, R R and Sankar, M R and Swaminathan, J and Khare, Alika (2016) Experimental investigation of underwater laser beam micromachining (UW-LB mu M) on 304 stainless steel. International Journal Of Advanced Manufacturing Technology, 85(9-12) (IF-2.209). pp. 1969-1982.

Belwanshi, V and Rane, K and Kumar, V and Pramanick, B (2023) Design Guidelines for Thin Diaphragm-Based Microsystems through Comprehensive Numerical and Analytical Studies. Micromachines, 14(9) .

Benda, J (1969) Precision die-forging. NML Technical Journal, 11 (3). pp. 13-15.

Bera, S and Ghosh Chowdhury, S and Lojkowsky, W and Manna, I (2012) Synthesis of CuCr and CuCrAg alloys with extended solid solubility with nano-Al2O3 dispersion by mechanical alloying and consolidation by high pressure sintering. Materials Science and Engineering : A, 558 (IF-2.003). pp. 298-308.

Bera, Supriya and Ghosh Chowdhury, S and Estrin , Yuri and Manna, I (2013) Mechanical properties of Al7075 alloy with nano-ceramic oxide dispersion synthesized by mechanical milling and consolidated by equal channel angular pressing. Journal of Alloys and Compounds, 548 (IF-2.390). pp. 257-265.

Bhadani, S N and Tewari, M and Agrawal, A and Sekhar, K C (1994) Extraction-spectrophotometric determination of nickel as ni-(par)(2)-(ctab)(2) complex in polymetallic sea-bed nodules and steels. Fresenius journal of analytical chemistry, 349 (6). pp. 478-481.

Bhadani, S N and Tewari, M and Agrawal, A and Sekhar, K C (1998) Extractive-photometric determination of cobalt(II) in steels using 4-(2-pyridylazo)resorcinol and xylometazoline hydrochloride. Journal of the indian chemical society, 75 (3). pp. 176-177.

Bhadani, S N and Tiwari, M and Agrawal, A and Kavipurapu, C S (1994) Spectrophotometric determination of fe(iii) with tiron in the presence of cationic surfactant and its application for the determination of iron in al-alloys and cu-based alloys. Mikrochimica Acta, 117 (1-2). pp. 15-22.

Bhagat, A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2004) Aging behaviour in copper bearing high strength low alloy steels. ISIJ International, 44 (1). pp. 115-122.

Bhagat, A N and Ranganathan, S and Mohanty, O N (2003) Electrical resistivity studies in low carbon and HSLA-100 steels. Materials Science and Technology, 19 (3). pp. 343-346.

Bhagat, R P (1996) Adsorption of H+/OH- and Sulfonate Ions on Hematite. Metals Materials and Processes, 1996, 8 (4). pp. 323-328.

Bhagat, R P (2010) Effect of Bed Height on Strength of Sinter and other Sintering Indices. Steel India, 33 (2). pp. 184-191.

Bhagat, R P (1992) Effect of Screening and Recirculating Fines from the Blast furnace Sinter on the Strand Productivity vis a vis Improvement in mean size of Sinter. Effect of Screening and Recirculating Fines from the Blast Furnace . pp. 47-53.

Bhagat, R P (1995) Effect of Solid Concentration on Settling of Unflocculated Iron ore Slimes in Compression Zone. Steel India, 18 (2). pp. 55-58.

Bhagat, R P (1994) Effect of Solid Concentration on Settling Rate of Iron Ore(Slimes). Steel India, 17 (1). pp. 36-39.

Bhagat, R P (1997) Electrokinetic Phenomena in Relation to adsorption of Surfactants on Hematite and Quartz Minerals. Steel India, 20 (2). pp. 47-51.

Bhagat, R P (1999) Factors affecting return sinter fines regimed and strand productivity in iron ore sintering. ISIJ International, 39 (9). pp. 889-895.

Bhagat, R P (1998) Flocculation of Iron ore Slimes using Synthesised Starch-g-Acrylamide Copolymer. Steel India, 21 (2). pp. 43-48.

Bhagat, R P (1989) Heat Transfer Consideration for Improvement in the Sintering Indices. Ironmaking conference proceedings-1989, . pp. 481-490.

Bhagat, R P (1999) Kinetics of sodium dodecyl benzene sulfonate adsorption on hematite. Scandinavian Journal of Metallurgy, 28 (4). pp. 156-161.

Bhagat, R P (2001) Kinetics of sodium dodecyl benzene sulfonate adsorption on hematite and its interaction with polyacrylamide. Colloid and Polymer Science, 279 (1). pp. 33-38.

Bhagat, R P (2015) Reduction of Solid Fuel Consumption in Sintering of Indian Iron Ore. Science of Sintering, 47(2) (IF-0.58). pp. 205-213.

Bhagat, R P (1999) Replacement of coke breeze by Leco-fines from Neyveli in iron ore sintering. Transactions of the indian institute of metals, 52 (5). pp. 299-304.

Bhagat, R P (1996) Settling test and size determination - Loading effect in settling of unflocculated particles and their size distribution. Scandinavian journal of metallurgy, 25 (2). pp. 48-50.

Bhagat, R P (1992) Studies on calcination of limestone and its assimilation by hematite during the sintering using thermo-gravimetric and x-ray-diffraction analyses. Scandinavian Journal of Metallurgy, 21 (6). pp. 246-250.

Bhagat, R P (2015) Study on utilisation coal fines generated in sponge iron making through pelletisation. Journal of Metallurgy and Materials Science, 57(3) . pp. 143-149.

Bhagat, R P (1996) Thermodynamics of Polymeric Flocculant adsorption on Hematite and other Mineral Surfaces. Steel India, 19 (1). pp. 11-17.

Bhagat, R P and Banerjee, B and Kunwar, R K (2001) Beneficiation tests on an Indian bauxite incorporating magnetic separation. Transactions of the Institution of Mining And Metallurgy Section C-Mineral Processing And Extractive Metallurgy, 110 . C165-C168.

Bhagat, R P and Biswas, A K and Gandhi, K S (1989) Preparation and Characterisation of Flocculating Polymers. Steel India, 12(2) . pp. 66-72.

Bhagat, R P and Chattoraj, U S and Goswami, M C and Singh, D P and Sil, S K (2007) Effect of size parameters of mix ingredients on the porosity and reduction characteristics of sinter. Steel Research International, 78 (6). pp. 451-454.

Bhagat, R P and Chattoraj, U S and Sil, S K (2006) Porosity of Sinter and its relation with the sintering indices. ISIJ International, 46 (11). pp. 1728-1730.

Bhagat, R P and Dey, Shobhana (1999) Flocculation of iron ore slimes from Joda and Kiriburu mines. Indian journal of chemical technology, 6 (5). pp. 280-284.

Bhagat, R P and Nayak, B and Bhattacharyya, K K and Goswami, M C (2014) Mineralogy of iron ore pellet and its correlation with crushing strength. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 117-123.

Bhagat, R P and Pathak, P N (1996) The effect of polymeric dispersant on magnetic separation of tungsten ore slimes. International Journal of Mineral Processing, 47 (3-4). pp. 213-217.

Bhagat, R P and Pathak, P N (1997) Effect of solid concentration on settling rate of granite ore slimes. Transactions of the Indian Institute of Metals, 50 (2-3). pp. 209-212.

Bhagat, R P and Ray, H S and Gupta, S K (1988) Effect of Some Process Parameters on the Performance of a Sintering Plant at Bhilai Steel Plant a Statistical Analysis. Transactions of the Indian Institute of Metals, 41(5) . pp. 465-474.

Bhagat, R P and Ray, H S and Gupta, Saibal Kanti (1991) Improvement in Performance of Blast Furnace at Bhilai through Statistical Analysis and Improvement in Burden Preparation. ISIJ International, 31 (7). pp. 669-676.

Bhagat, R P and Schieder, D and Immler, J and Dobias, B (1997) Adsorption of H+/OH- and sulfonate ions on hematite. Metals Materials and Processes, 8 (4). pp. 323-328.

Bhagat, R P and Sil, S K and Chattoraj, U S and Goswami, M C and Singh, D P and Das, B K (2006) Pot Sintering Studies for Improvement in Reducibility and RDI Values of Sinter. Steel India . pp. 127-134.

Bhagat, R P and Sil, S K and Srivastava, J P (2002) Effect of Polymeric Additive and other Variables on Efficiency of Grinding of Limestone. Trans. Instn Min. Metall. (Sect. C: Mineral Process. Extr. Metall.), 111 (3). pp. 160-162.

Bhagat, R P and Vijaya Kumar, T V (2005) Study on removal of suspended particles and colour impurities from the paint effluent of an automotive industries by adsorption. Journal of Metallurgy and Materials Science, 47 (3). pp. 159-168.

Bhagat , R P and Ray, H S and Gupta, S K (1992) A Relationship between Strength of Sinter and the Ratio of Return Fines output to Return Fines Input. NML Technical Journal, 34 (3-4). pp. 17-22.

Bharathy, R Sundara and Venugopalan, T and Ghosh, M (2022) A Study on Brittle Cleavage Fracture on Ti-Mo Nano-precipitation-Strengthened High-Strength Steel. J of Mats. Engg. Performance .

Bhaskar Raju, G (2008) Beneficiation of low-grade iron ores. Mining Engineers Journal, March . pp. 18-23.

Bhaskar Raju, G (2009) Recent developments in flotation for the beneficiation of lowgrade finely disseminated ores. Mining Engineers Journal (December). pp. 11-23.

Bhaskar Raju, G and Balasubramanian, K J and Khangaonkar, P R (1990) Zeta potential and flocculation behavior on iron ore fines using magnafloc polymers. Bulletin of Electrochemistry, 6 (10). pp. 836-839.

Bhaskar Raju, G and Forsling, Willis (1991) Adsorption mechanism of diethyldithio carbamate on covellite, cuprite and tenorite. Colloids and Surfaces, 60 . pp. 53-69.

Bhaskar Raju, G and Forsling, Willis (1997) Adsorption of thiol collectors on Chalcopyrite. Journal of Surface Science Technology, 13 (1). pp. 25-37.

Bhaskar Raju, G and Forsling, Willis (1992) Electrokinetic studies on covellite, cuprite and tenorite. Bulletin of Electrochemistry, 8 (8). pp. 402-406.

Bhaskar Raju, G and Forsling, Willis and Holmgren, Allan (1997) Adsorption of Dextrin at mineral water interface. Journal of Colloid and Interface Science, 193 (2). pp. 215-222.

Bhaskar Raju, G and Forsling, Willis and Holmgren, Allan (1998) Complexation mechanism of dextrin with metal hydroxides. Journal of Colloid and Interface Science, 200 . pp. 1-6.

Bhaskar Raju, G and Hanumantha Rao, K and Forsling, Willis (2012) Role of dextrin in the selective flotation of fluorite. SGAT Bulletin, 13 (1) . pp. 37-46.

Bhaskar Raju, G and Karuppiah, M T and Latha, S S and Parvathy, S and Prabhakar, S (2008) Treatment of wastewater from synthetic textile industry by electrocoagulation-electrooxidation. Biochemical Engineering Journal, 144 (1). pp. 51-58.

Bhaskar Raju, G and Karuppiah, M T and Latha, S S and Priya, D L and Parvathy, S and Prabhakar, S (2009) Electrochemical pretreatment of textile effluents and effect of electrode materials on the removal of organics. Desalination, 249 (1). pp. 167-174.

Bhaskar Raju, G and Keerthi, Ramachandra and Latha, S S and Prabhakar, S (2011) Degradation of dyes by UV/O3/H2O2 and Electro-oxidation techniques. Water Practice & Technology, 6 (2). pp. 1-9.

Bhaskar Raju, G and Khangaonkar, P R (1982) Electro-flotation of chalcopyrite. International Journal of Mineral Processing, 9 . pp. 133-143.

Bhaskar Raju, G and Khangaonkar, P R (1982) Electro-flotation of chalcopyrite fines. International Journal of Mineral Processing, 9 (2). pp. 133-143.

Bhaskar Raju, G and Khangaonkar, P R (1984) Electroflotation of chalcopyrite fines with sodium diethyldthiocarbamate as collector. International Journal of Mineral Processing, 13 . pp. 211-221.

Bhaskar Raju, G and Khangaonkar, P R (1984) Electroflotation-A critical review. Transactions of the Indian Institute of Metals, 37 (1 ). pp. 59-66.

Bhaskar Raju, G and Khangaonkar, P R and Prabhakar, S (1987) Separation of minerals by electroflotation. Bulletin of Electrochemistry, 3 (1 ). pp. 37-40.

Bhaskar Raju, G and Latha, S S and Karuppiah, P T and Prabhakar, S and Parvathy, S (2008) Treatment of wastewater from synthetic textile industry by electrocoagulation and electrooxidation. Chemical Engineering Journal, 144 . pp. 51-58.

Bhaskar Raju, G and Latha Priya, D and Latha, Swarna and Parvathy, S and Prabhakar, S (2010) Removal of organics from the waste waters of dyebath by electrooxidation. Asian Journal of Water, Environment and Pollution, 7 (4). pp. 19-23.

Bhaskar Raju, G and Parthiban, V and Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S (2014) Separation of sillimanite from beach sands contaminated with shell. International Journal of Scientific Engineering and Technology, 3(4) (IF-1.852). pp. 320-325.

Bhaskar Raju, G and Prabhakar, S (2000) Beneficiation of fluorspar by column flotation. Minerals & Metallurgical Processing, 17 (3). pp. 167-172.

Bhaskar Raju, G and Prabhakar, S and Sankaran, C (1993) Beneficiation of iron-ores by column flotation. Transactions of the institution of mining and metallurgy section c-mineral processing and extractive metallurgy, 102 ( ). C132-C135.

Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2004) Development of indigenous column flotation technology at NML for the beneficiation of low-grade ores. Metals Materials and Processes, 16 (2-3). pp. 143-156.

Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Gopalakrishna, K (2007) Pilot-scale studies on the treatment of tannery effluents by electroflotation. International Journal of Environment and Pollution (IJEM), 30 (2). pp. 332-344.

Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Vijayakumar, T V and Vasumathi, N and Suhasini, S and Ashish Kumar, M and Shiva Kumar, S (2015) Evaluation of Flotation Collectors in Developing Zero Waste Technology for Processing Iron Ore Tailings. International journal of Engineering Research, 4(11) ( GIF-0.421). pp. 604-608.

Bhaskar Raju, G and Ratchambhigai, S and Rao, Ananda and Vasumathi, N and Vijaya Kumar, T V and Prabhakar, S and Subba Rao, S (2016) Beneficiation of Barite Dumps by Flotation Column; Lab-Scale Studies to Commercial Production. Transactions of the indian institute of metals, 69(1) (IF-0.62). pp. 75-81.

Bhaskar Raju, G and Subrahmanyam, T V and Sun, Z and Forsling, Willis (1991) Shear flocculation of quartz. International Journal of Mineral Processing, 32 . pp. 283-294.

Bhatnagar, S S and Datar, N S and Guha, B K and Chattopadhyay, R and Sinha, R K (1977) High strength low alloy structural steels. NML Technical Journal, 19 (1). pp. 1-7.

Bhatnagar, S S and Guha, B K and Sinha, R K (1979) Vanadium high-strength low-alloy steels for low-temperature use. Journal of Materials Science, 14 (7). pp. 1631-1640.

Bhattacharjee, A K and Mahanta, B Cmu and Mukherjee, K K and Rout, M K (1986) Relative acidity of 5-hydroxyperinaphthindane-1,3-dione. Journal of the Indian Chemical Society, 63 (4). pp. 406-407.

Bhattacharjee, A K and Singh, Inder (1995) A mathematical account of marine corrosion behaviour of galvanised steel structures installed in Digha coast of Bay of Bengal. Indian Journal of Marine Sciences, 25 (3). pp. 280-281.

Bhattacharjee, A K and Singh, Inder (1995) Studies on the presence of copper in the galvanized coating on weathering steel and the adherence characteristic of the protective copper complex formed on galvanized weathering steel. Journal of materials science, 30 (6). pp. 1617-1620.

Bhattacharjee, A K and Singh, Inder (1993) Studies on the workability of tafel technique for high potential scan rate electro-chemical polarisation of steel and zinc-coated steels in 3.5% NaCl solution. NML Technical Journal, 35 (3-4). pp. 55-61.

Bhattacharjee, G and Kushwaha, O S and Kumar, A and Khan, M Y and Patel, J N and Kumar, Rajneesh (2017) Effects of Micellization on Growth Kinetics of Methane Hydrate. Industrial & Engineering Chemistry Research, 56(13) (IF-2.843). pp. 3687-3698.

Bhattacharjee, PP and Tsuji, N (2012) Development of Cube Texture in Pure Ni Following Ultrahigh by Accumaulative Roll Bonding and Annealing. Materials Science Forum, 715-716 . 521- .

Bhattacharjee, S (1993) Geometric volume and new refrigerants—I. Halomethanes. Computers & Chemistry, 17 (4). pp. 383-388.

Bhattacharjee, S (1995) Geometric volume and new refrigerants—II. Haloethanes. Computers & Chemistry, 19 (1). pp. 51-58.

Bhattacharjee, S (1994) Haloethanes, geometric volume and atomic contribution method. Computers & Chemistry, 18 (4). pp. 419-429.

Bhattacharjee, S and Basak, A C and Dasgupta, P (1992) Molecular property correlation in haloethanes with geometric volume. Computers & Chemistry, 16 (3). pp. 223-228.

Bhattacharjee, S and Bhattacharyya, G and Mitra, A (2003) Chronological development of heavy metal accumulation research in earthworms - A review. Journal of Metallurgy and materials Science, 45 (1). pp. 19-37.

Bhattacharjee, S and Chakravarty, S and Maity, S and Dureja, V and Gupta, K K (2005) Metal contents in the groundwater of Sahebgunj district, Jharkhand, India, with special reference to arsenic. Chemosphere, 58 (9). pp. 1203-1217.

Bhattacharjee, S and Chakravarty, S and Maity, S and Kar, S and Thakur, P and Bhattacharyya, G (2003) Removal of lead from contaminated water bodies using sea nodule as an adsorbent. Water Research, 37 (16). pp. 3954-3966.

Bhattacharjee, S and Chatterjee, N N and Gupta, K K (1990) Gpack-i - an application software for drawing calibration curves. Computers & Chemistry, 14 (3). pp. 247-248.

Bhattacharjee, S and Dasgupta, P (1994) Molecular property correlation in alkanes with geometric volume. Computers & Chemistry, 18 (1). pp. 61-71.

Bhattacharjee, S and Dasgupta, P and Jha, S N and Rao, A S and Gupta, K K and Pandey, L P (1993) Computational elimination of interelemental interference in the analysis of copper, cobalt and nickel in polymetallic sea bed nodules by flame atomic absorption spectrometry. Talanta, 40 (5). pp. 675-680.

Bhattacharjee, S and Dasgupta, P and Paul, A R and Ghosal, S and Padhi, K K and Pandey, L P (1998) Mineral element composition of spinach. Journal of the science of food and agriculture, 77 (4). pp. 456-458.

Bhattacharjee, S and Gupta, K K (1992) A new technique for surface optimization. Computers & Chemistry, 16 (3). pp. 229-232.

Bhattacharjee, S and Gupta, K K and Chakravarty, S and Thakur, P and Bhattacharyya, G (2005) Separation of iron, nickel, and cobalt from sulphated leach liquor of low nickel lateritic oxide ore. Separation Science and Technology, 39 (2). pp. 413-429.

Bhattacharjee, S and Kar, S and Chakravarty, S (2004) Mineral compositions of Datura: A traditional tropical medicinal plant. Communications in Soil Science and Plant Analysis, 35 (7-8). pp. 937-946.

Bhattacharjee, S and Rao, A S and Dasgupta, P (1991) A new index for molecular property correlation in halomethanes. Computers & chemistry, 15 (4). pp. 319-322.

Bhattacharjee, S and Roy, Nilima and Dey, A K and Banerjee, M K (1993) Statistical appraisal of the atmospheric corrosion of mild steel. Corrosion Science, 34 (4). pp. 573-581.

Bhattacharya, A K (1992) Observation of dendritic cavities in “nickel-free” austenitic stainless steel. Journal of Materials Science Letters, 11 (1). pp. 26-28.

Bhattacharya, A K and Parida, N and Gope, P C (1992) Monitoring hydrogen embrittlement cracking using acoustic emission technique. Journal of Materials Science, 27 ( 6). pp. 1421-1427.

Bhattacharya, Ankita and Biswal, S and Barik, R K and Mahato, B and Ghosh, M and Mitra, Rahul and Chakrabarti, Debalay (2024) Comparative interplay of C and Mn on austenite stabilization and low temperature impact toughness of low C medium Mn steels. Materials Characterization, 208 .

Bhattacharya, Ankita and Karmakar, Anish and Karani, Arnab and Ghosh, M and Chakraborty, D (2019) Processing of Ultrafine-Grained Steels by Warm Rolling and Annealing. Journal of Materials Engineering and Performance, 28(2) (IF-1.476). pp. 753-768.

Bhattacharya, D K (1995) Characterisation of microstructure in steels by magnetic techniques - An overview. Transactions of the indian institute of metals, 48 (6). pp. 495-513.

Bhattacharya, D K (2003) NDT for residual life assessment in Indian industry. Insight, 45 (1). pp. 31-40.

Bhattacharya, D K and Vaidyanathan, S (1997) Effect of the demagnetisation factor on the Barkhausen noise signal. Journal of Magnetism and Magnetic Materials, 166 (1-2). pp. 111-116.

Bhattacharya, H P and Ghosh, A and Mukherjee, J K (1970) Investigations on molybdenum concentrates obtained from Rakha Mines. NML Technical Journal, 12 (2). pp. 40-43.

Bhattacharya, J (1975) Cold extrusion of copper powder. Metallurgia and metal forming, 42 (2). p. 36.

Bhattacharya, J and Das, B N (1970) Evaluation of manganese-copper-nickel alloys for use in thermobimetal. NML Technical Journal, 12 (1). pp. 9-11.

Bhattacharya, J and Ghosh, B N and Banerjee, S K (1984) Differential deformation during roll bonding of stainless-steel to aluminum sheet. Transactions of the Indian Institute of metals, 37 (5). 552-&.

Bhattacharya, J and Ghosh, B N and Chaudhury, S K and Chakraborty, S and De , P K and Mohanty, O N (1992) Structure property correlation in thermo-mechanically processed ultra high-carbon steel. Scandinavian Journal Of Metallurgy, 21 (6). pp. 279-283.

Bhattacharya, Maitreyee (2016) Reaction Mechanism and Thermodynamics of Segregation Roasting of Iron Oxide. International Journal of Mineral Processing and Extractive Metallurgy, 1(5) . pp. 64-69.

Bhattacharya, P and Lee, J H and Kar, K K and Park, H S (2019) Carambola-shaped SnO2 wrapped in carbon nanotube network for high volumetric capacity and improved rate and cycle stability of lithium ion battery. Chemical Engineering Journal, 369 (IF-8.355). pp. 422-431.

Bhattacharya, S and Dey, Shobhana (2008) Evaluation of frother performance in coal flotation- A critical review of existing methodologies. Mineral Processing and Extractive Metallurgy Review, 12 (2-4). pp. 108-129.

Bhattacharya, S and Dhar, S and Das, S K and Ganguly, Ranjan and Webster, T J and Nayar, S (2014) Colloidal graphite/graphene nanostructures using collagen showing enhanced thermal conductivity. International Journal of Nanomedicine, 9 (IF-4.195). pp. 1287-1298.

Bhattacharya, S and Jenamoni, K and Nayar, S (2012) Stability of biomimetic ferrofluids established by a systematic study using microwave irradiation at defined wattages. Journal of Magnetism and Magnetic Materials, 324 (20). pp. 3261-3266.

Bhattacharya, S and Jyoti, Divya and Sahu, L and Dey, Shobhana and Singh, H (2017) Flotation of Low Volatile Coking Coal Fines. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 421-432.

Bhattacharya, S and Mallik, D and Nayar, S (2011) Comparative Study of Biomimetic Iron Oxides Synthesized Using Microwave Induced and Conventional Method. IEEE Transactions on Magnetics, 47 (6). pp. 1647-1653.

Bhattacharya, S and Roychowdhury, Anirban and Das, D and Nayar, S (2015) Multi-functional biomimetic graphene induced transformation of Fe3O4 to ε-Fe2O3 at room temperature. RSC Advance (IF-3.84). pp. 89488-89497.

Bhattacharya, S and Sheikh, Lubna and Tiwari, V and Ghosh, M and Patel, J N and Patel, A B and Nayar, S (2014) Protein-Polymer Functionalized Aqueous Ferrofluids Showing High T2 Relaxivity. Journal of Biomedical Nanotechnology, 10(5) (IF-7.578). pp. 811-819.

Bhattacharya, Soumya and Mishra, Swati and Gupta, P and Pranav, P and Ghosh, M and Pramanick, A K and Mishra, D P and Nayar, S (2015) Liquid phase collagen modified graphene that induces apoptosis. RSC Advances, 5(55) (IF-3.84). pp. 44447-44457.

Bhattacharya, Soumya and Roychowdhury, Anirban and Tiwari, V and Prasad, A B Krishna and Ningthoujam, R S and Patel, A B and Das, Dipankar and Nayar, S (2015) Effect of biomimetic templates on the magneto-structural properties of Fe3O4 nanoparticles. RSC Advances, 5(18) (IF-3.708). pp. 13777-13786.

Bhattacharyya, A S and Das, G C and Mukherjee, S and Mishra, Suman K (2009) Effect of radio frequency and direct current modes of deposition on protective metallurgical hard silicon carbon nitride coatings by magnetron sputtering. Vacuum, 83 (12). pp. 1464-1469.

Bhattacharyya, A S and Mishra, Suman K (2011) Micro/nanomechanical behavior of magnetron sputtered Si-C-N coatings through nanoindentation and scratch tests. Journal of Micromechanics and Microengineering, 21 (1). 015011.

Bhattacharyya, A S and Mishra, Suman K (2010) Raman studies on nanocomposite silicon carbonitride thin film deposited by r.f. magnetron sputtering at different substrate temperatures. Journal of Raman Spectroscopy, 41 (10). pp. 1234-1239.

Bhattacharyya, A S and Mishra, Suman K and Mukherjee, S (2010) Correlation of structure and hardness of rf magnetron sputtered silicon carbonitride films. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 28 (4). pp. 505-509.

Bhattacharyya, A S and Mishra, Suman K and Mukherjee, Surojit and Das, G C (2009) A comparative study of Si–C–N films on different substrates grown by RF magnetron sputtering. Journal of Alloys and Compounds, 478 (1-2). pp. 474-478.

Bhattacharyya, P and Nayak, B and Kumar, Vinay (2008) Prospects of beach sands of Karnataka Coast. Journal of Metallurgy and Materials Science, 50 (3). pp. 167-173.

Bhattacharyya, P and Sarkhel, B R and Maulik, S C (1998) Efficacy of multi-gravity separator in recovery of values from waste using experimental design. NML Technical Journal, 40 (4). pp. 109-114.

Bhattacharyya, P and Singh, R and Kumar, Vinod and Chattoraj, U S and Bhattacharyya, K K and Roychaudhury, A (2007) Studies on Efficacy of Multi Gravity Seperator for Beneficiation of Indian Coal Fines. Mineral Processing Technology . pp. 1-5.

Bhattacharyya, S K (2000) Technology strategy to meet challenges in steel. Journal of Metallurgy and materials Science, 42 (3). pp. 133-137.

Bhattamishra, A K (1997) Microstructural studies on the effect of Si and Cr on the intergranular corrosion in Al---Mg---Si alloys. Materials & Design, 18 (1). pp. 25-28.

Bhattamishra, A K (1992) Observation of dendritic cavities in nickel-free austenitic stainless-steel. Journal of Materials Science Letters, 11 (1). pp. 26-28.

Bhattamishra, A K (2006) Study of hot-dip galvanised zinc and zinc-copper alloy coatings in chloride and chloride containing carboxylic acids media. Journal of Metallurgy and Materials Science, 48 (4). pp. 215-220.

Bhattamishra, A K and Banerjee, M K (1993) Corrosion behavior of al-zn-mg alloys in nacl solution in presence of cerium salts. Zeitschrift fur metallkunde, 84 (10). pp. 734-736.

Bhattamishra, A K and Banerjee, M K (2009) Effect of temperatures of corrosive medium on corrosion of a high strength aluminium alloy. Journal of Metallurgy and Materials Science, 51 (1). pp. 43-46.

Bhattamishra, A K and Basu, D K (2001) A comparative study on the performance of inhibitors for protection of recirculating cooling water system. Journal of Metallurgy and materials Science, 43 (2). pp. 141-145.

Bhattamishra, A K and Basu, D K and De, P K and Narang, S K (2004) Corrosion behaviour of carbon steels and aluminium alloys in different media - A comparative study. Journal of Metallurgy and materials Science, 46 (1). pp. 51-59.

Bhattamishra, A K and Chattoraj, I and Basu, D K and De, P K (2000) Study on the influence of the Si/Fe ratio on the corrosion behaviour of some Al-Fe-Si alloys. Zeitschrift Fur Metallkunde, 91 (5). pp. 393-396.

Bhattamishra, A K and De, P K and Das, S K and Sivaramakrishnan, C S (2000) Environmental effect on cold pressure welded non-ferrous wires. Journal of Metallurgy and materials Science, 42 (1). pp. 47-51.

Bhattamishra, A K and De, P K and Mandhyan, A and Das, S K (2005) Localised corrosion of 2124SiCp composite. Journal of Metallurgy and Materials Science, 47 (4). pp. 215-222.

Bhattamishra, A K and Lal, Kishori (1998) Influence of ageing on corrosion behaviour of Al-Mg-Si alloys in chloride and acid media. Zeitschrift fur metallkunde, 89 (11). pp. 793-796.

Bhattamishra, A K and Lal, Kishori (1997) Microstructural studies on the effect of Si and Cr on the intergranular corrosion in Al-Mg-Si alloys. Materials & Design, 18 (1). pp. 25-28.

Bhattamishra, A K and Lal, Kishori and Nair, G G and Kumar, Rajendra (1987) Corrosion behaviour of overhead aluminium/alloy conductors in industrial and coastal environments. NML Technical Journal, 29 (1-4). pp. 20-24.

Bhattamishra, A K and Lal, Kishori and Sivaramakrishnan, C S (1996) Effect of Si/Mg ratio on the corrosion behaviour of Al-Mg-Si alloys for automotive applications. NML Technical Journal, 38 (3). pp. 101-106.

Bhattamishra, A K and Mishra, G S and Banerjee, M K (1991) Influence of silicon/iron ratio on corrosion behaviour of aluminium-silicon alloys in inorganic and organic acids. Anti-Corrosion Methods and Materials, 38 (2). pp. 4-13.

Bhattamishra, A K and Mishra, G S and Banerjee, M K (1992) On the effect of misch metal addition on corrosion behavior of aluminum in inorganic and organic-acids. Zeitschrift Fur Metallkunde, 83 (10). pp. 766-768.

Bhattamishra, A K and Singh, Inder and Lal, Kishori and Kumar, Rajendra (1986) Studies on the corrosion behaviour of aluminium alloy conductors in NaCl and Na2SO4 solutions. NML Technical Journal, 28 (1-4). pp. 10-17.

Bhende, Vinay P (1963) Development Planning in under developed countries. NML Technical Journal, 5 (4). pp. 4-10.

Bhojani, A and Rao, V J and Vaish, Ashok Kumar and Bhatnagar, S K and Kumar, M (2018) Development of roasting-leaching route to produce iron ore concentrate at par with the composition of medium/high grade iron ore from low grade iron ore and iron ore slimes suitable for steel making. Journal of Metallurgy and Materials Science, 60(4) . pp. 189-202.

Bhoray, S S and Sampath, V S and Bhatnagar, P P (1969) Studies on desilication of siliceous bauxite from Kashmir. NML Technical Journal, 11 (2). pp. 30-35.

Bhowmick, T and Nayak, B and Verma, A K (2017) Chemical and mineralogical composition of Kathara Coal, East Bokaro Coalfield, India. Fuel , 208 (IF-4.601). pp. 91-100.

Bhunia, D and Mehrotra, S P and Shekhar, R (2006) A novel probe for measuring current distribution in Wood's metal in a simulated Hall–Heroult cell. Mineral Processing and Extractive Metallurgy, 115 (4). pp. 206-212.

Bhurat, M C and Dwivedy, K K and Jayaram, K M V and Dar, K K (1973) Some results of microbial leaching of Uranium ore samples from Narwapahar, Bhatin and Keruadungri, Singhbhum District, Bihar. NML Technical Journal, 15 (4). pp. 47-51.

Bhuyan, D and Sastry, G V S and Patra, S and Pradhan, S K and Manna, R (2023) Effect of austempering time on bainite plate thickness and variant selection in a high carbon low alloy steel. Materials Characterization, 200 .

Bhuyan, P and Pradhan, S K and Mitra, R and Mandal, S (2021) Strain-induced microstructural evolution and its implication on high-temperature hot corrosion (HTHC) phenomena in Alloy 617. Materials Characterization, 178 .

Bid, S and Sahu, Puspendu and Pradhan, S K (2007) Microstructure characterization of mechanosynthesized nanocrystalline NiFe2O4 by Rietveld's analysis. Physica E: Low-dimensional Systems and Nanostructures, 39 (2). pp. 175-184.

Bisht, K S and Sah, K (2020) Spectroscopic changes in conventional magnetorheological fluid and graphene oxide based magnetorheological fluid with combustion method. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 89-93.

Biswal, Vivekananda and Soni, Sunny and Jena, D P and Kumar, Rajesh (2008) Application of image processing in estimation of area of heat affected zone. Journal of Metallurgy and Materials Science, 50 (4). pp. 219-225.

Biswas, A and Nistala, Harsha and Sinha, Moni (2015) Effect of flux granulometry on the sintering process using thermodynamic analysis. Journal of Metallurgy and Materials Science, 57(2) . pp. 67-74.

Biswas, A C and Bhattacharya, H P (1969) Rapid method for the complete analysis of ferro-chrome slag. NML Technical Journal, 11 (2). pp. 4-6.

Biswas, A C and Bhattacharya, H P (1964) Rapid method for the determination of manganese in the manganese-bearing stainless steel. NML Technical Journal, 6 (3). pp. 15-17.

Biswas, A C and Padhi, K K and Bhattacharya, H P (1976) Simultaneous sequential spectrophotometric method for the determination of silica and alumina in iron ores and sinters. NML Technical Journal, 18 (2). pp. 25-27.

Biswas, D K and Ashana, S R and Rau, V G (2003) Some studies on energy savings in sponge iron plants. Journal Of Energy Resources Technology-Transactions Of The, 125 (3). pp. 228-237.

Biswas, D K and Asthana, S R and Rau, V G (2001) Pollution management with techno-economic evaluation for coke based and cokeless cupolas. Applied Thermal Engineering, 21 (3). pp. 359-379.

Biswas, D K and Choudhury, Arijit (2016) Pollution management with techno-economical evaluation for coke based and cokeless furnaces concerning melting and casting of brass and bell metal. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 201-211.

Biswas, D K and Singh, S D and Mishra, K K and Ramachandrarao, P (1999) Pollution free operation of foundry industries. NML Technical Journal, 40 (2). pp. 43-56.

Biswas, Nabonita and Ghosh, T K and Mukherjee, Rajesh and Rao, S Mohan (2013) Exploiting iron values from iron ore source rock: Opportunities. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 305-311.

Biswas, P K and Dev, S C and Godiwalla, K M and Sivaramakrishnan, C S (1999) Effect of some design parameters on the suspension characteristics of a mechanically agitated sand–water slurry system. Materials & Design, 20 (5). pp. 253-265.

Biswas, P K and Godiwalla, K M and Dev, S C (2004) Physical modelling of particle distribution for stir cast metal matrix composite using sand-water and sand - aqueous CaCl2 slurry system. Journal of Metallurgy and materials Science, 46 (2). pp. 67-93.

Biswas, P K and Godiwalla, K M and Sanyal, D (2002) A simple technique for measurement of apparent viscosity of slurries: sand–water system. Materials & Design, 23 (5). pp. 511-519.

Biswas, P K and Godiwalla, K M and Sanyal, D and Dev, S C (2002) A simple technique for measurement of apparent viscosity of slurries: sand-water system. Materials & Design, 23 (5). pp. 511-519.

Biswas, Piyalee and Das, S and Sarkar, Paromita and Choudhary, Kamal and Baidya, Prasanta and Giri, P and Ghosal, A and Bandyopadhyay, A K (2013) Rectificaton of Energy transport in nonlinear metamaterials via ratchets. Journal of Physics D-Applied Physics, 46(20) (IF-2.528).

Biswas, R K and Jana, R K and Habib, M A and Hasan, M M (2006) Processing of copper dust for tolerable iron containing electrolyte. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 115 (4). pp. 234-240.

Biswas, S K and Ghosh, S B and Chatterjee, A B (1972) Scrap-oxygen steelmaking in top-blown converter. NML Technical Journal, 14 (1). pp. 1-8.

Biswas, Somjeet and Sivaprasad, S and Narasaiah, N and Tarafder, S and Chakraborti, P C (2007) Load history effect on FCGR behaviour of 304LN stainless steel. International Journal of Fatigue, 29 (4). pp. 786-791.

Bjorling, G and Elfstrom, N G (1962) Electrolytic Manganese in a Non-Diaphragm Cell. NML Technical Journal, 4 (1). pp. 30-32.

Blackburn, L.D. and Bonanno, F R and Burte, H M and Herzog, J A and Stuhrke, W F (1966) Metal matrix composite materials. NML Technical Journal, 8 (1). pp. 45-55.

Bodas, M G (1996) Hydrometallurgical treatment of zinc silicate ore from Thailand. Hydrometallurgy, 40 (1-2). pp. 37-49.

Bodas, M G and Akerkar, D D (1991) Extraction of nickel and cobalt from over-burden sample of chromite ore mines of orissa mining corporation. Transactions of the Indian Institute of Metals, 44 (6). pp. 433-440.

Bodas, M G and Akerkar, D D and Altekar, V A (1979) Thermal-decomposition of manganese carbonate for the production of manganese-dioxide. Transactions of the Indian Institute of Metals, 32 (5).

Bodas, M G and Bagchi, D and Akerkar, D D (1988) Characterization and leaching studies of the manganese residue generated in the treatment of polymetallic sea nodules. Transactions of the Indian Institute of metals, 41(6) . pp. 615-617.

Bodas, M G and Dash, D R and Sivaramakrishnan, C S (1996) Oxidation of iron powder in a fluidized bed reactor. Materials & Design, 17 (3). pp. 167-172.

Bodas, M G and Mathur, S B (1997) Studies in reduction-roast leaching ion exchange of copper converter slag from an Indian copper complex, Ghatshila. Industrial & Engineering Chemistry Research, 36 (12). pp. 5419-5424.

Bodas, M G and Mathur, S B (2001) Treatment of vanadium pentoxide plant effluent by ion exchange process. Transactions of the Indian Institute of Metals, 54 (3). pp. 131-136.

Bodas, M G and Saha, A K and Rao, Addanki S and Singh, M (2002) Chemical benefication of nickel overburden of Sukinda mining corporation. Transactions of the Indian Institute of Metals, 55 (6). pp. 557-560.

Booth, N (1960) Pilot Plants in Pyrometallurgy. NML Technical Journal, 2 (1). pp. 47-51.

Boranbaev, B M and Srinivasan, T M and Datta, S S and Kakkar, N K and Bhagat, R P and Choudhury, B Roy and Dharanipalan, S and Thakur, D S and Tripathi, V N and Das, Narayan (1982) Sinterability of Various Ore Fines used at Bhilai Steel Plant. Steel India, 5(2) . pp. 115-123.

Boranbaev, B M and Srinivasan, T M and Dutta, S S and Kakkar, N K and Bhagat, R P and Choudhury, B Roy and Dharanipalan, S and Jha, J B and Das, Narayan and Chatterjee, B K and Thakur, D S (1982) Investigations on the Process of Ignition of Sinter Mix of Bhilai. Steel India, 5(2) . pp. 110-114.

Bose, A and Singh, K and Dubey, P and Mishra, S K and Mishra, Suman K (2022) Study of dry sliding wear and corrosion behavior of nanocomposite Al-Si-N coated steel. Surface & Coatings Technology, 441 .

Bose, A K (1994) Bonding of alumina. NML Technical Journal, 36 (3). pp. 95-103.

Bose, A K (1995) Development of high-temperature aluminous mortar. Transactions of the indian institute of metals, 48 (2). pp. 115-119.

Bose, A K (1999) Drying behaviour of alumina gel. NML Technical Journal, 40 (1). pp. 37-41.

Bose, A K (1995) Gel bonding of alumina. NML Technical Journal, 37 (3). pp. 113-119.

Bose, A K and Chatterjee, B and Mathur, N N and Gupta, K N (1993) Refractory high (70-90%) alumina hydraulic cement. NML Technical Journal, 35 (1-2). pp. 13-18.

Bose, A K and Rao, M R K (1981) Development of alumina foam insulation refractories. NML Technical Journal, 23 (3-4). pp. 43-45.

Bose, B C and Choudhury, V N and Pandey, L P (1980) Simultaneous complexometric determination of iron and calcium in phosphate rock. Indian journal of chemistry section A-Inorganic bio-inorganic physical theoretical & analytical chemistry, 19 (2). pp. 180-181.

Bose, S and Pathak, L C and Singh, R (2018) Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer’s solution for bio-implant application. Applied Surface Science, 433 (IF-3.387). pp. 1158-1174.

Bose, S C and Singh, K and Swaminathan, J and Sarma, D S (2004) Prediction of creep life of X10CrMoVNbN-91 (P-91) steel through short term stress relaxation test methodology. Materials Science and Technology, 20 (10). pp. 1290-1296.

Bose, S C and Singh, Kulvir and Jayaraman, G and Venugopal, K (2000) Evaluation and establishment of short-term stress relaxation test methodology for predicting long-term creep life of steam turbine components. Journal of Metallurgy and materials Science, 42 (3). pp. 177-197.

Bose, S C and Singh, Kulvir and Ray, Ashok K and Ghosh, R N (2008) Effect of thermal ageing on mechanical properties and microstructures of a standard G-X 12 CrMoVWNbN 1011 grade of cast steel for turbine casing. Materials Science and Engineering A, 476 (1-2). pp. 257-266.

Bose, S K and Altekar, V A (1982) Studies on iron reduction of stibnite by x-ray diffraction and scanning electron microscopy. NML Technical Journal, 24 (1-2). pp. 5-7.

Bose, S K and Altekar, V A (1980) Thermal-reaction in the iron reduction of stibnite. Transactions of the Indian Institute of Metals, 33 (3). pp. 201-203.

Bose, S K and Denanot, and Melle, M F and Caisso, J (1969) Observation of dislocation in some binary and ternary copper base alloys of F.C.C. structure. NML Technical Journal, 11 (2). pp. 15-20.

Bose, S K and Gupta, R D and Kumar, Rajendra (1987) Transformation characteristics of supersaturated aluminium-chromium solid-solution. Transactions of the Indian Institute of metals, 40 (5). pp. 389-393.

Bose, S K and Kumar, Rajendra (1973) Structure of rapidly solidified aluminum-silicon alloys. Journal of materials science, 8 (12). pp. 1795-1799.

Boteva, Antoaneta (2000) Characteristics of fine gold losses during processing of some copper ores. Journal of Metallurgy and materials Science, 42 (4). pp. 199-202.

Bourzik, O and Baba, K and Akkouri, N and Meshram, Rohit B and Bouyakhsass, R and Nounah, A (2023) Life cycle assessment and thermophysical properties of a fly ash-based geopolymer containing drinking water treatment sludge-. Environmental Science and Pollution Research .

Brisby, M D J (1960) The Development of a Steel Industry-Factors Affecting the Econonmics of Steel. NML Technical Journal, 2 (1). pp. 36-46.

Bucknall, E H and Steven, W (1949) Hardening response of steels. Progress in Metal Physics, 1 . pp. 235-258.

Budhani, R K (1976) Creep resistant steels for the heavy electrical industry. NML Technical Journal, 18 (4). pp. 63-68.

Bui, Q V and Nam, N D and Choi, D H and Lee, J B and Lee, C Y and Kar, Abhijit and Kim, J G and Jung, S B (2010) Corrosion protection of ENIG surface finishing using electrochemical methods. Materials Research Bulletin, 45 (3). pp. 305-308.

Bui, Q V and Nam, N D and Yoon, J W and Choi, D H and Kar, Abhijit and Kim, J G and Jung, S B (2011) Effect of Gold on the Corrosion Behavior of an Electroless Nickel/Immersion Gold Surface Finish. Journal of Electronic Materials, 40 (9). pp. 1937-1942.

Ca, To Duy (1998) Effect of Molybdenum on the Formation of Carbides and Phases Structure of 12Cr20Ni38Mo5-Alloy. NML Technical Journal, 40 (3). pp. 66-76.

Ca, To Duy (1998) Effect of molybdenum on the formation of carbides and phases structure of 12Cr20Ni38Mo5-alloy. NML Technical Journal, 40 (3). pp. 87-94.

Ca, To Duy (1998) Influence of rare earth metals on macrostructure of continuously cast steel rolling pipe. NML Technical Journal, 40 (2). pp. 57-62.

Calla, O P N and Rathore, Inder Singh (2011) Complex dielectric constant measurement of glass epoxy and zinc oxide at temperature ranging from -1960C to +2000C at microwave frequencies. Journal of Metallurgy and Materials Science, 53 (2). pp. 161-173.

Callender, W (1959) Studies in the Sintering Permeability and Pellet Strength of Australian Hematite Ores. NML Technical Journal, 1 (1). pp. 47-58.

Cao, B and Shaeffer, M and Cadel, D and Ramesh, K T and Prasad, Sanjay (2018) An Analysis of Strengthening Mechanisms and Rate-Dependence in a High Strength Aluminum Alloy. Journal of Dynamic Behavior of Materials, 4(1) . pp. 6-17.

Chae, Sujin and Yoo, Kyoungkeun and Alorro, Richad Diaz and Jha, Manis K (2021) Effect of Lead and Antimony on Sulfuric Acid Leaching of Copper in Speiss from Top Submerged Lance Furnaces. Korean Journal of Metals and Materials, 59(1) . pp. 33-40.

Chakladar, S and Banerjee, Riya and Mohanty, Ashok and Chakravarty, S and Patar, Prasanjeet (2020) Turpentine oil: a novel and natural bridging liquid for agglomeration of coal fines of high ash coals. International Journal of Coal Preparation and Utilization, online (IF-2.034).

Chakladar, S and Chakravarty, S and Mohanty, Ashok and Alex, T C and Kumar, Sanjay (2020) Quality improvement of heat altered coals: A preliminary feasibility study. Environmental Technology & Innovation, 18 (IF-2.800). p. 100764.

Chakladar, S and Mohanty, Ashok and Mandal, S and Chakravarty, S (2019) Structural evaluation of coking component of West Bokaro coal of Indian origin. Journal International Journal of Coal Preparation and Utilization (IF-2.020). pp. 1-14.

Chakladar, S and Mohanty, Ashok and Patar, P K and Chakravarty, S and Mandal, S and Mallick, S and Jha, B C and Singh, N K and Shukla, B N (2021) Demineralization of high ash non-coking coal fines of Indian origin using Castor oil: Implications of wet milling. International Journal of Coal Preparation and Utilization, online .

Chakladar, S and Vishwakarma, Dhiraj and Patar, Prasanjeet and Mohanty, Ashok and Chakravarty, S and Patra, Chiranjib (2022) Effect of surfactant, ionic strength, mineralogical composition, and surface morphology on zeta potential of bituminous coals of Indian origin. International Journal of Coal Preparation and Utilization .

Chakrabarti, D M (1986) A computer programme for calculating free settling terminal velocities. NML Technical Journal, 28 (1-4). pp. 3-9.

Chakrabarti, D M (1972) Heavy media hydrocyclones in mineral beneficiation. NML Technical Journal, 14 (4). pp. 129-136.

Chakrabarti, D M (2000) Simple Approach to Estimation of the Work Index. Transaction of the Institute Min. Metall.(Sect. C: Mineral Process. Extr. Metall, 109 (2). pp. 83-89.

Chakrabarti, Kaushik and Sarkar, B and Ashok, V D and Das, K and Chaudhuri, S S and Mitra, A and De, S K (2014) Exchange bias effect in BiFeO3-NiO nanocomposite. Journal of Applied Physics, 115(1) (IF-2.185). 013906.

Chakrabarti, S and Jha, G and Singh, D D N (2002) Evaluation of Corrosion Behaviour of Corrugated Galvanised Sheets. Tata Search, 2002 . pp. 1-8.

Chakrabarty, A and Chakrabarty, P and Jain, R and Sahu, V K and Gurao, N P and Bar, H N and Khutia, N (2023) Influence of Scanning and Building Strategies on the Deformation Behavior of Additively Manufactured AlSi10Mg: CPFEM and Finite Element Studies. Metals and Materials International .

Chakrabarty, A and Sahu, R and Kumar, A and Bar, H N and Hitzler, L and Khutia, N (2023) Finite element evaluation of fracture toughness and crack propagation in LB-PBF AlSi10Mg. Continuum Mechanics and Thermodynamics, 35(2) . pp. 677-697.

Chakrabarty, A and Sahu, V K and Das, Anindya and Mukherjee, Shreya and Gurao, N P and Chakraborty, P and Bar, H N and Khutia, N (2021) Study of the Effect of Two Separate Tilt Angles of Laser Scanning Lines on the Microstructure and Mechanical Properties in Direct Metal Laser Sintered AlSi10Mg Alloy. Metals and Materials International .

Chakrabarty, A K and Khutia, N and Bar, H N and Dey, P P and Sivaprasad, S (2017) Effect of Loading Variations on Damage of SA333 C-Mn Steel. Materials Today: Proceedings, 4(2) Part A . pp. 415-423.

Chakrabarty, S and Mandal, S and Biswas, S and Pramanick, A K and Ray, M and Hossain, S M (2018) Trap-Assisted Switching in Silicon Nanocrystal Based p-i-n Device. IEEE Transactions on Device and Materials Reliability, 18 (4) (IF-1.583). pp. 620-627.

Chakraborty, A and Adhikary, M and Venugopalan, T and Nanda, T and Kumar, B R (2016) Effect of ferrite-martensite interface morphology on bake hardening response of DP590 steel. Materials Science and Engineering A-Structural Materials Properties Micro structure and Processing, 676 (IF-3.094). pp. 463-473.

Chakraborty, A and Singh, U P (1993) An efficient technical information classification system. NML Technical Journal, 35 (3-4). pp. 63-69.

Chakraborty, D and Ranganathan, S and Sinha, S N (2007) Reduction of Chromite ore at different flow rates of inert gas. INFACON XI . pp. 153-158.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2010) Carbothermic Reduction of Chromite Ore Under Different Flow Rates of Inert Gas. Metallurgical and Materials Transactions B, 41 (1). pp. 10-18.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2005) Investigations on the carbothermic reduction of chromite ores. Metallurgical and Materials Transactions B, 36 (4). pp. 437-444.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2003) Kinetics of reduction of chromium in chromite ore. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 335-339.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2004) The Kinetics of Reduction of Iron in Indian Chromite Ores by Carbon. Metals Materials and Processes, 16 (2-3). pp. 199-208.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2002) Reduction kinetics of iron and chromium in chromite ore. Journal of Metallurgy and materials Science., 44 (1). pp. 1-13.

Chakraborty, J (2014) Diffraction stress analysis of fiber textured Ti thin films undergoing hcp - fcc phase transformation. International Confrence on Residual Stresses 9 (ICRS 9), 768-769 . pp. 257-263.

Chakraborty, J (2021) Lattice expansion and phase stability in nanocrystalline titanium thin films. Philosophical Magazine Letters, 101(8) . pp. 330-340.

Chakraborty, J and Das, Swapan K and Rao, Venkatesh and Sinha, Arvind (2003) Behaviour of iron ion in the morphosynthesis of magnetite particles. Materials Transactions , 44 (6). pp. 1124-1127.

Chakraborty, J and Ghosh, M and Ranjan, R and Das, Goutam and Das, D and Chandra, Sanjay (2013) X-ray diffraction and Mossbauer spectroscopy studies of cementite dissolution in cold-drawn pearlitic steel. Philosophical Magazine, 93(36) . pp. 4598-4616.

Chakraborty, J and Harzer, T P and Duarte, Maria J and Dehm, G (2021) Phase decomposition in nanocrystalline Cr0.8Cu0.2 thin films. Journal of Alloys and Compounds, 888 .

Chakraborty, J and Maiti, Tias and Ghosh, M and Das, Goutam and Chandra, Sanjay (2014) Cementite dissolution in cold drawn pearlitic steel wires: role of dislocations. International Confrence on Residual Stresses 9 (ICRS9), 768-769 . pp. 304-312.

Chakraborty, J and Oellers, T and Raghavan, R and Ludwig, A and Dehm, G (2022) Microstructure and residual stress evolution in nanocrystalline Cu-Zr thin films. Journal of Alloys and Compounds, 896 .

Chakraborty, Jay and Kumar, Kishor and Ranjan, R and Ghosh Chowdhury, S and Singh, S R (2010) Stress, Texture and Phase Transformation in Titanium Thin Films. Texture and Anisotropy of Polycrystals, 160 . pp. 109-116.

Chakraborty, Jay and Kumar, Kishor and Ranjan, Rajeev and Ghosh Chowdhury, S and Singh, S R (2011) Thickness-dependent fcc–hcp phase transformation in polycrystalline titanium thin films. Acta Materialia, 59 (7). pp. 2615-2623.

Chakraborty, Jui and Nayar, S and Singh, T B and Bhattacharyya, D and Sinha, Arvind (2004) Templated growth of mesoporous aluminum phosphate tubules using protein molecules of tobacco. Journal of Materials Science, 39 (1). pp. 285-288.

Chakraborty, M (2011) Chemical Synthesis and Characterization of Nickel Powder. Metallurgical and materials transactions B-Process metallurgy and materials processing science, 42 (2). pp. 380-384.

Chakraborty, M and Paramguru, R K and Jena, A K (2001) Electrochemical dissolution of nichrome in sulphuric acid. Hydrometallurgy, 59 (1). pp. 45-54.

Chakraborty, M and Srikanth, S (2000) Kinetics of salt roasting of chalcopyrite using KCl. Thermochimica Acta, 362 (1-2). pp. 25-35.

Chakraborty, S K (2015) E-waste recycling. Journal of Metallurgy and Materials Science, 57(2) . pp. 107-113.

Chakraborty, S P and Chaudhury, S K and Dubey, R K (1978) Ausrolling of spring steel for automotive applications. Transactions of the Indian Institute of Metals, 31 (5-6). pp. 420-423.

Chakraborty, S P and Choudhury, S K and De, P K and Dubey, R K (1986) Some observations on hot-forging characteristics of iron-powder preforms. NML Technical Journal, 28 (1-4). pp. 26-29.

Chakraborty, S P and Dubey, R K and Gupte, P K (1971) Some observations on ausforming of high-carbon, high-chromium die steel. NML Technical Journal, 13 (2). pp. 52-57.

Chakraborty, S P and Ghosh, S and Sivaramakrishnan, C S (1996) Advance in automotive castings. NML Technical Journal, 38 (3). pp. 113-115.

Chakraborty, S P and Menon, P R and Sharma, I G and Bose, D K (1997) Recovery of vanadium values from titaniferrous magnetite ore of masanikere origin. NML Technical Journal, 39 (2). pp. 87-92.

Chakraborty , G and Pal, T K and Palit Sagar, S and Parida , N (2011) Non Destructive Characterization Of Resistance Spot Welded Joints By Ultrasonic Technique. Indian Welding Journal, 44 (1). pp. 30-36.

Chakravarty, K and Mishra, V and Chakravarty, S and Chakladar, S and Saxena, V K and Bhattacharya, S (2019) Mineralogical Study of Beneficiated and Carbonized Indian Coking Coal for Better Utilization: A Case Study. Natural Resources Research (IF-2.000). pp. 1-20.

Chakravarty, K and Mishra, V and Chakravarty, S and Chakladar, S and Saxena, V K and Bhattacharya, S (2020) Mineralogical Study of Beneficiated and Carbonized Indian Coking Coal for Better Utilization: A Case Study. Natural Resources Research, 29 . pp. 2431-2450.

Chakravarty, Koushik and Kumar, Sunil (2020) Increase in energy efficiency of a steel billet reheating furnace by heat balance study and process improvement. Energy Reports, 6 (IF-3.83). pp. 343-349.

Chakravarty, S and Bhattacharjee, S and Gupta, K K and Singh, Manjit and Chaturvedi, Hema T and Maity, S (2007) Adsorption of zinc from aqueous solution using chemically treated newspaper pulp. Bioresource Technology, 98 (16). pp. 3136-3141.

Chakravarty, S and Chakravarty, K and Mishra, V and Chakladar, S and Mohanty, Ashok and Sharma, Mamta (2020) Characterization of Chemical Structure with Relative Density of Three Different Ranks of Coal from India. Natural Resources Research, 29(5) (IF-3.708). pp. 3121-3136.

Chakravarty, S and Dureja, V and Bhattacharyya, G and Maity, S and Bhattacharjee, S (2002) Removal of arsenic from groundwater using low cost ferruginous manganese ore. Water Research, 36 (3). pp. 625-632.

Chakravarty, S and Mohanty, Ashok and Banerjee, Amit and Tripathy, R and Mandal, G K and Basariya, M R and Sharma, Mamta (2015) Composition, mineral matter characteristics and ash fusion behavior of some Indian coals. Fuel, 150 (IF-3.406). pp. 96-101.

Chakravarty, S and Mohanty, Ashok and Ghosh, B and Tarafder, Mita and Aggarwal, S G and Gupta, P K and Prabhat, K (2014) Proficiency Testing in Chemical Analysis of Iron Ore: Comparison of Statistical Methods for Outlier Rejection. Mapan-Journal of Metrology Society of India, 29(2) (IF-0.477). pp. 87-95.

Chakravarty, S and Mohanty, Ashok and Nag, Sudha T and Upadhyay, A K and Konar, J and Sircar, J K and Madhukar, A and Gupta, K K (2010) Removal of Pb(II) ions from aqueous solution by adsorption using bael leaves (Aegle marmelos). Journal of Hazardous Materials, 173 (1-3). pp. 502-509.

Chakravarty, S and Pimple, S and Chaturvedi, Hema T and Singh, S and Gupta, K K (2008) Removal of copper from aqueous solution using newspaper pulp as an adsorbent. Journal of Hazardous Materials, 159 (2-3). pp. 396-403.

Chakravorty, M and Paramguru, R K and Sircar, J K and Jena, P K (1997) Electro-dissolution of nichrome in hydrochloric acid. Bulletin of Electrochemistry, 13 (6). pp. 269-274.

Chalavadi, G and Das, Avimanyu (2015) Study of the mechanism of fine coal beneficiation in air table. Fuel, 154 . pp. 207-216.

Chalavadi, G and Singh, R (2019) Theoretical aspects of conceptual multi-property mineral separator. Separation Science and Technology, 54(18) (IF-1.354). pp. 3154-3163.

Chalavadi, G and Singh, R K (2021) Feasibility study of iron ore fines beneficiation by shallow bed air fluidized separator. Particulate science and technology, 39(4) (IF-1.619). pp. 391-400.

Chalavadi, G and Singh, R K (2020) Study of Dry Mineral Separation Behavior in Dry Density Separators. Transactions of the Indian Institute of Metals, 73(8) (IF-1.205). pp. 2125-2128.

Chalavadi, G and Singh, R K and Sharma, Mamta and Das, Avimanyu (2015) Recovery of Combustibles from Fine Coal through Controlled Air Fluidization over Inclined Deck. Separation Science and Technology, 50(13) (IF-1.171). pp. 2032-2040.

Chalavadi, G and Singh, R K and Sharma, Mamta and Singh, Ratnakar and Das, Avimanyu (2016) Development of a Generalized Strategy for Dry Beneficiation of Fine Coal over a Vibrating Inclined Deck. International Journal of Coal Preparation and Utilization, 36(1) (IF-0.673). pp. 10-27.

Chalavadi, G and Singh, R K and Singh, R and Sharma, Mamta and Rath, R K and Mukherjee, A K (2018) Development of Dry Beneficiation Flow Sheet for Fine Coking Coal. International Journal of Coal Preparation and Utilization (IF-1.05). pp. 1-14.

Chalavadi, G and Singh, Ranjeet K and Das, Avimanyu (2016) Processing of coal fines using air fluidization in an air table. International Journal of Mineral Processing, 149 (IF- 1.561). pp. 9-17.

Chandan, A K and Bansal, G K and Kundu, J and Chakraborty, J and Ghosh Chowdhury, S (2019) Effect of prior austenite grain size on the evolution of microstructure and mechanical properties of an intercritically annealed medium manganese steel. Materials Science and Engineering: A , 768 (IF-4.081). p. 138458.

Chandan, A K and Hung, P T and Kishore, K and Kawasaki, M and Chakraborty, J and Gubicza, Jeno (2021) On prominent TRIP effect and non-basal slip in a TWIP high entropy alloy during high-pressure torsion processing. Materials Characterization, 178 .

Chandan, A K and Kishore, Kaushal and Hung, P T and Ghosh Chowdhury, S and Kawasaki, M and Gubicza, Jeno (2022) Effect of nickel addition on enhancing nano-structuring and suppressing TRIP effect in Fe40Mn40Co10Cr10 high entropy alloy during high-pressure torsion. International Journal of Plasticity, 150 .

Chandan, A K and Mishra, G and Mahato, B and Ghosh Chowdhury, S and Kundu, S and Chakraborty, J (2019) Stacking Fault Energy of Austenite Phase in Medium Manganese Steel. Metallurgical and Materials Transactions A , 50(10) (IF-1.985). pp. 4851-4866.

Chandan, A K and Murugaiyan, Premkumar and Chowdhury, S G (2023) Temperature-dependent stacking fault energy, deformation behavior, and tensile properties of a new high-entropy alloy. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 883 .

Chandan, A K and Sahoo, Biraj K and Bansal, G K (2021) Medium Manganese Steel: A Promising Candidate for Automotive Applications. Steel Tech, 15(2) . pp. 60-66.

Chandan, A K and Tripathy, S and Ghosh, M and Chowdhury, S G (2020) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature (vol 50, pg 128, 2019). Metallurgical and Materials Transactions A-physical metallurgy and materials science, 51(3) (IF-2.050). p. 1438.

Chandan, A K and Tripathy, S and Ghosh, M and Ghosh Chowdhury, S (2019) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature. Metallurgical and Materials Transactions A, 50(11) (IF-1.985). pp. 5079-5090.

Chandan, A K and Tripathy, S and Sen, B and Ghosh, M and Ghosh Chowdhury, S (2021) Temperature dependent deformation behavior and stacking fault energy of Fe40Mn40Co10Cr10 alloy. Scripta Materialia, 199 (IF-5.079). p. 113891.

Chandrasekaran, V and Kannan, K and Natesan, M (2004) Corrosion behaviour of mild steel in phosphoric acid medium with benzotriazole. Journal of Metallurgy and Materials Science, 46 (4). pp. 253-262.

Chandrasekhar, K and Subramanian, S and Modak, J M and Natarajan, K A (1998) Removal of metal ions using an industrial biomass with reference to environmental control. International Journal of Mineral Processing, 53 (1-2). pp. 107-120.

Chandwani, H K and Vishwanathan, V and Goyal, R N and Prasad, P M (1997) Recovery of iron and metal values from red mud possibilities in Indian scenario. NML Technical Journal, 39 (3). pp. 117-128.

Chapman, J A and Phillips, R and Craik, R L (1965) Pearlite free structural steels. NML Technical Journal, 7 (1). pp. 27-31.

Char, M and Chakrabarty, A K and Metya, A K and Kar, Abhijit (2020) Retardation Effect of Tin Multilayer on Sn-3.0Ag-0.5Cu (SAC305)-Based Solder Joint Interface. Journal of Material Engineering and Performance, 29(4) (IF-1.652). pp. 2305-2315.

Charles, J A (1959) Iron Pretreatment Research. NML Technical Journal, 1 (1). pp. 68-79.

Chattaraj, Mousumi and Sahoo, K L and Singh, H P and Ghosh, Sukomal (2003) Studies on the Potentiality of Kusum Oil (Schleichera Oleosa) as a Core and Mould Binder for Foundry Applications. Indian Foundry Journal, 49(4) . pp. 25-28.

Chattaraj, Mousumi and Sinha, N K (2004) Isolation and characterization of chemical constituent from the leaves of Cestrum nocturnum. Journal of Metallurgy and materials Science., 46 (4). pp. 243-245.

Chatterjea, A B (1973) Closing Remarks of National Seminar on Baterial Leaching. NML Technical Journal, 15 (4). 11- .

Chatterjea, A B (1974) International-Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel. Journal of Scientific & Industrial Research, 33 (1). pp. 7-9.

Chatterjea, A B (1969) Smelting of iron ore fines with non-metallurgical fuels and blast additives: experimental trials for ten years in low-shaft furnace. NML Technical Journal, 11 (4). pp. 4-52.

Chatterjea, A B and Goswami, J and Biswas, S K and Santokh, Singh R and Padan, J S and Ghosh, S R (1969) Smelting of iron ore with raw lumpy non-coking coals. NML Technical Journal, 11 (4). pp. 53-67.

Chatterjea, A B and Nijhawan, B R (1960) Stress-corrosion failure of austenitic stainless steel. NML Technical Journal, 2 (3). pp. 20-25.

Chatterjea, A B and Nijhawan, B R and Goswami, J and Biswas, S K and Singh, Santokh R and Padan, J S (1967) Production of pig iron from Andhra Pradesh raw materials. NML Technical Journal, 9 (1). pp. 16-22.

Chatterjee, A and Srikanth, S and Sanyal, S and Krishna, L and Anand, K and Subramanian, P R (2011) Kinetic Modeling of High Temperature Oxidation of Ni-base Alloys. Computational Materials Science, 50(3) (1.458 (SCI)). pp. 811-819.

Chatterjee, A N and Banerjee, N G and Banerjee, T (1965) Determination of nitrogen in solid solution in steel by electro-chemical method. NML Technical Journal, 7 (3). pp. 4-6.

Chatterjee, Amit and Raj, Manish (2010) How the steel industry can get the best out of Indian coal. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), 1 (Section 6). pp. 411-418.

Chatterjee, B and Roy, P L (1992) Some Observations on the Selection of Ceramic Shell Mould Materials for Investment Casting. NML Technical Journal, 34 (3-4). pp. 9-16.

Chatterjee, B and Singh, K K (1992) Oxidation Phenomena in Carbon containing Refractories and their Protection. NML Technical Journal, 34 (1-2). pp. 27-34.

Chatterjee, P and Banerjee, M K and Mukherjee, K P (1991) Synergistic inhibition of inorganic anions with pyridine-derivatives for steel in hydrochloric-acid. Indian Journal of Technology, 29 (4). pp. 191-194.

Chatterjee, P and Singh, D D N (1991) H2S Corrosion control of steel by using pyridine compounds. Anti-Corrosion Methods and Materials, 38 (1). pp. 4-10.

Chatterjee, Partho Pratim (2014) Embryonic improvements of solar photovoltaics. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 67-72.

Chatterjee, Partho Pratim (2015) Generation of piezoelectric potential difference from solar energy induced thermo-mechanical stress. Journal of Metallurgy and Materials Science, 57(1) . pp. 19-25.

Chatterjee, S and Bandopadhyay, A and Datta, A K and Kumar, S and Sengupta, B (2008) Technologies for Mitigation of Arsenic from Ground Water. Low Cost Technology for In-Situ Treatment of Groundwater . pp. 31-53.

Chatterjee, S and Bandopadhyay, A and Sengupta, Bhaskar (2008) Arsenic Contamination of Ground Water. Low Cost Technology for In-Situ Treatment of Groundwater . pp. 1-19.

Chatterjee , Partha Pratim (2016) Recent developments in aerospace materials. Journal of Metallurgy and Materials Science, 58(2) (IF- 0.04). pp. 53-56.

Chattopadhyay, A (1998) Microstructure and liberation characteristics of chalcopyrite concentrate from Indian Copper Complex, Ghatsila. NML Technical Journal, 40 (1). pp. 23-28.

Chattopadhyay, A (2000) Remobilization and concentration of gold in banded iron formation from Ajjenahalli area, Tumkur District, Karnataka, India. Journal of Metallurgy and materials Science, 42 (1). pp. 53-64.

Chattopadhyay, A and Banerjee, B and Maulik, S C (1996) Mineralogical evaluation of Zinc-lead ore from Ganesh Himal region of central Nepal. NML Technical Journal, 38 (4). pp. 169-173.

Chattopadhyay, A and Banerjee, B and Maulik, S C (2000) Mineralogy and Geochemistry of Beldih apatite, Purulia district, West Bengal. Journal of Metallurgy and materials Science, 42 (4). pp. 203-213.

Chattopadhyay, Lalitha (1996) Size effect on crack-tip creep. Engineering Fracture Mechanics, 53 (2). pp. 309-310.

Chattopadhyay, Lalitha (1996) Size effect on creep energy dissipation during stable crack growth. Engineering Fracture Mechanics, 54 (6). pp. 897-899.

Chattopadhyay, Lalitha (1995) Size effect on plastic energy dissipation during stable crack growth. Engineering Fracture Mechanics, 51 (4). pp. 697-700.

Chattopadhyay, Lalitha and Ghosh, R N (1996) Clip: Computer software for creep life prediction of engineering materials. Engineering Fracture Mechanics, 54 (1). pp. 71-73.

Chattopadhyay, R and Guha, B K and Bhatnagar, S S (1968) The effect of normalising on the properties of low carbon vanadium-niobium-nitrogen structural steels. NML Technical Journal, 10 (1). pp. 10-14.

Chattopadhyay, S (1988) A mathematical-modeling of the thermal profile of an ESR Ingot during controlled cooling. Transactions of the Indian Institute of metals, 41 (4). pp. 349-356.

Chattopadhyay, S and Anand, G and Ghosh Chowdhury, S and Manna, I (2018) Effect of reverse austenitic transformation on mechanical property and associated texture evolution in AISI 316 austenitic stainless steel processed by low temperature rolling and annealing. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 734 (IF-4.014). pp. 139-148.

Chattopadhyay, S and Chattopadhyay, Lalitha and Banerjee, S (1996) The K-calibration and standardization of ceramic specimen. Engineering Fracture Mechanics, 54 (1). pp. 167-169.

Chattopadhyay, S and Srikanth, S (1994) The CdSe-MnSe pseudobinary system(cadmium seleniummanganese selenium. Journal of Phase Equilibria, 15 (1). pp. 96-100.

Chattopadhyay, S and Srikanth, S (1994) The Cu-Pb-Sn (copper-lead-tin) system. Journal of Phase Equilibria, 15 (5). pp. 553-557.

Chattoraj, I (1995) The effect of hydrogen-induced cracking on the integrity of steel-components. Sadhana-academy proceedings in engineering sciences, 20 ( ). pp. 199-211.

Chattoraj, I (1993) The effect of near-crystallization temperature annealing on the electrochemical behavior of amorphous Fe77.5B15Si7.5 fibres in borate buffer. Scripta Metallurgica et Materialia, 29 (5). pp. 611-616.

Chattoraj, I (2009) Hydrogen embrittlement: Recent Indian research and perspectives. Corrosion Reviews, sp. Iss.sl suppl . pp. 181-211.

Chattoraj, I (1995) Hydrogen-induced cracking on the integrity of steel-components. Sadhana-Academy Proceedings In Engineering Sciences, 20 . pp. 199-211.

Chattoraj, I (1997) Stepwise cracking in a longitudinally welded steel linepipe. Transactions of the Indian Institute of Metals, 50 (1). pp. 97-102.

Chattoraj, I and Bhattamishra, A K and Jana, S and Das, S K and Chakraborty, S P and De, P K (1996) The association of potentiokinetic reactivation and electrochemical pitting tests on a nitrogen bearing 19 Cr-17 Mn steel with its thermal history. Corrosion Science, 38 (6). pp. 957-969.

Chattoraj, I and Bhattamishra, A K and Joarder, A and Bhattacharya, D K (1995) Identification of the corrosion mechanism in a boiler drum by corrosion product analysis. Anti-corrosion methods and materials, 42 (3). pp. 4-6.

Chattoraj, I and Bhattamishra, A K and Mitra, A (1992) The effect of corrosion on the magnetic properties of papidly solidified Fe-Si-B amorphous fibres. Scripta Metallurgica et Materialia, 26 (7). pp. 1013-1017.

Chattoraj, I and Bhattamishra, A K and Mitra, A (1993) Polarization and resistivity measurements of post-crystallization changes in amorphous Fe-B-Si alloys. Corrosion, 49 (9). pp. 707-713.

Chattoraj, I and Das, Swapan K and Jana, S and Chakraborty, S P and Bhattamishra, A K (1995) Passivity breakdown due to discontinuous precipitation during aging of 21Cr-1oMn-5Ni stainless-steel. Journal of Materials Science, 30 (20). pp. 5313-5320.

Chattoraj, I and Das, Swapan K and Ravi Kumar, B and Bhattacharya, D K (1997) Corrosive degradation and failure of vertical furnace wall tubes of a boiler. Engineering Failure Analysis, 4 (4). pp. 279-286.

Chattoraj, I and Joarder, A and Bhattamishra, A K and Bhattacharya, D K and Ghosh, R N (1997) Crevice attack of a boiler steam drum. Canadian Metallurgical Quarterly, 36 (2). pp. 143-148.

Chattoraj, I and Kumar, A and Das, Swapan K and Tarafder, Mita and Tarafder, S (2003) Factors influencing the extent of hydrogenenhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. Zeitschrift Fur Metallkunde , 94 (11). pp. 1228-1233.

Chattoraj, I and Kumar, Anil and Das, Swapan K and Tarafder, Mita and Tarafder, Soumitra (2022) Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. International Journal of Materials Research, 94(11) . pp. 1228-1233.

Chattoraj, I and Mitra, A (1998) Changes in electrochemical responses of some Fe-B-Si-Cu-Nb alloys before and after devitrification. Scripta Materialia, 39 (6). pp. 755-761.

Chattoraj, I and Pathak, L C (1998) Electrochemical behavior of superconducting Bi1.4Pb0.6Sr2Ca2Cu3O10 in halide-containing acetate buffer. Corrosion Science, 54 (6). pp. 435-443.

Chattoraj, I and Rao, K R M and Das, Swapan K and Mitra, A (1999) Anodic reactions of amorphous and devitrified Fe–B–Si–Nb–Cu alloys in buffered chloride and fluoride. Corrosion Science, 41 (1). pp. 1-16.

Chattoraj, I and Tarafder, Mita and Das, Swapan K and Tarafder, S (2003) Hydrogen induced brittle crack growth in Cu-strengthened HSLA-100 steels. Materials Science and Engineering A, 339 (1-2). pp. 136-149.

Chattoraj, I and Tiwari, S B and Ray, Ashok K and Mitra, A and Das, Swapan K (1995) Investigation on the mechanical degradation of a steel line pipe due to hydrogen ingress during exposure to a simulated sour environment. Corrosion Science, 37 (6). pp. 885-896.

Chattoraj, I and Wilde, B E (1992) The effect of shot peening on calculated hydrogen surface coverage of AISI 4130 steels. Scripta Metallurgica et Materialia, 26 (1). pp. 89-94.

Chaudhary, C and Sahoo, K L and Mandal, D (2020) Processing and characterisation of modified strain-induced melt activation processed Al-Si alloys. Materials Science and Technology, 36(2) (IF-5.040). pp. 181-193.

Chaudhary, P N and Goel, R P (2001) Dephosphorisation of high carbon ferromanganese using BaCO3 based fluxes. Ironmaking & Steelmaking, 28 (5). pp. 396-403.

Chaudhary, P N and Minj, R K and Krishna, Ram and Goel, R P (2004) Selective removal of phosphorus from high carbon ferromanganese - an improved process. Metals Materials and Processes, 16 (2-3). pp. 217-226.

Chaudhary, P N and Pal, J and Singh, D P and Singh, M and Ghosh, Sukomal (2004) Dephosphorization of steelmaking slag. Transactions of the Indian Institute of Metals, 57 (5). A5.

Chaudhary, P N and Prasad, Sidheshwar and Singh, U (1994) Effective utilisation of R&D results through feasibility report and detailed project report. NML Technical Journal, 36 (3). pp. 117-123.

Chaudhary, S K (2001) Corrosion of Rails: Causes and its prevention. Journal of Metallurgy and materials Science, 43 (4). pp. 265-271.

Chaudhary, S K (2003) An innovative solution for deterioration of railway track. Journal of Metallurgy and Materials Science . pp. 45-53.

Chaudhary, S K (2002) Performance of sulphur concrete exposed to corrosive environment. Journal of Metallurgy and materials Science, 44 (4). pp. 223-229.

Chaudhuri, S (2008) Philosophy of integrity assessment of engineering components. Materials Science and Engineering: A, 489 (1-2). pp. 259-266.

Chaudhuri, S (2006) Some aspects of metallurgical assessment of boiler tubes—Basic principles and case studies. Materials Science and Engineering A, 432 (1-2). pp. 90-99.

Chaudhuri, S and Ghosh, R N (2009) Creep Behavior Of 2.25cr1mo Steel-Effects Of Thermal Ageing And Pre-Strain. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing , 510-11 (sl. lss). pp. 136-141.

Chaudhuri, S and Ghosh, R N (1998) Some aspects of mechanisms and modelling of creep behaviour of 2.25Cr-1Mo steel. ISIJ International, 38 (8). pp. 881-887.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2010) Assessment of creep and rupture behavior of 2.25Cr-1Mo steel — A strain based approach and its limitation. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 403-409.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (1993) Modelling high temperature creep of Cr---Mo steel. Acta Metallurgica et Materialia, 41 (1). pp. 273-278.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2000) Stress rupture ductility diagram - A diagnostic tool. ISIJ International, 40 (2). pp. 207-210.

Chaudhuri, S P (1996) Automotive emission and control. NML Technical Journal, 38 (2). pp. 77-80.

Chaudhuri, S P and Mahanti, R K and Sivaramakrishnan, C S and Singh, M P (2002) Physical properties of some thermomechanically processed microalloyed steels. Materials & Design, 23 (5). pp. 489-496.

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2004) Preparation and thermomechanical properties of stir cast Al-2Mg-11TiO2 (rutile). Bulletin of Materials Science, 27 (6). pp. 517-521.

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2005) Effect of processing parameters on physical properties of spray formed and stir cast Al–2Mg–TiO2 composites. Materials Science and Engineering A, 393 (1-2). pp. 196-203.

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2005) Wear and friction behavior of spray formed and stir cast Al–2Mg–11TiO2 composites. Wear, 258 (5-6). pp. 759-767.

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2004) Tensile and fracture behavior of spray formed and stir cast Al–2Mg–TiO2 composites. Materials Science and Engineering A, 374 (1-2). pp. 184-190.

Chaudhury, S K and Sivaramakrishnan, C S and Panigrahi, S C (2004) A new spray forming technique for the preparation of aluminium rutile (TiO2) ex situ particle composite. Journal of Materials Processing Technology, 145 (3). pp. 385-390.

Chaurasia, P K and Barik, B K and Das, A and Goecke, S F and De, A (2024) Probing dimensional consistency during multi-track multi-layer gas metal arc directed energy deposition of aluminium alloys. Welding in the World .

Chennakesavulu, K and Basariya, M R and Bhaskar Raju, G and Prabhakar, S (2011) Study on thermal decomposition of calix[6]arene and calix[8]arene. Journal of Thermal Analysis and Calorimetry, 103 (3). pp. 853-862.

Chennakesavulu, K and Basariya, M R and Sreedevi, P and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2011) Study on thermal decomposition of calix[4]arene and its application in thermal stability of polypropylene. Thermochimica Acta, 515 (1-2). pp. 24-31.

Chennakesavulu, K and Bhaskar Raju, G (2010) Mechanochemical Synthesis of p-Nitro Calix[6]arene. Asian Journal of Chemistry, 22 (6). pp. 4947-4949.

Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2010) A novel de-tert-butylation of p-tert-butylcalix[n]arenes. Asian Journal of Chemistry, 22 (7). pp. 5513-5516.

Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2010) Studies on the adsorption of arsenic on Cali[6]arene. Journal of Physical Organic Chemistry, 23 . pp. 723-729.

Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S and Nair, C M and Murthy, K V G K (2009) Adsorption Of Oleate On Fluorite Surface As Revealed By Atomic Force Microscopy. International Journal of Mineral Processing, 90 (1-4). pp. 101-104.

Chennakesavulu, K and Sreedevi, P and Raju, G B and Reddy, G R (2020) Study on interaction of p-sulfonato calix[6]arene with arsanilic acid. Journal of dispersion science and technology, Online .

Chennakesavulu, K and Sreedevi, P and Raviatul Basaria, M and Ramanjaneya Reddy, G and Bhaskar Raju, G and Prabhakar, S and Sasipraba, T (2014) Thermal decomposition mechanism of p-tert-butyl-calix[n]arenes. Thermochimica Acta (2014) , 575 (IF-2.105). pp. 55-63.

Chesters, J H (1960) The Encouragement of Productive Research. NML Technical Journal, 2 (4). pp. 24-26.

Chetal, S C and Sabharwal, M C (1976) Design basis and materials requirements for sodium heated steam generators for fast reactors. NML Technical Journal, 18 (4). pp. 73-80.

Chi, Tran D and Lee, Jae-chun and Pandey, B D and Jeong, Jinki and Yoo, Kyoungkeun and Huyunh, Trung Hai (2011) Bacterial Cyanide Generation in Presence of Metal Ions (Na+, Mg2+, Fe2+, Pb2+) and Gold Bioleaching from Waste PCBs. Journal of Chemical Engineering of Japan, 44(10) (0.442 (SCI)). pp. 692-700.

Chi, Tran D and Lee, Jae-chun and Pandey, B D and Yoo, Kyoungkeun and Jeong, Jinki (2011) Bioleaching of gold and copper from waste mobile phone PCBs by using a cyanogenic bacterium. Minerals Engineering, 24 . pp. 1219-1222.

Chidambaram, S and Ashok, K and Karthik, V and Venkatakrishnan, P G (2018) Microbiological corrosion of ASTM SA105 carbon steel pipe for industrial fire water usage. IOP Conference Series: Materials Science and Engineering, 314 (IF 0.32).

Chidambaram, S and Kamaraj, A (2017) Failure investigation of an industrial crankshaft made of ductile iron. Advances in natural and applied sciences, 11(8) . pp. 25-30.

Chidambaram, S and Kamaraj, A (2017) Failure investigation of an industrial crank shaft pin. Advances in Natural and Applied Sciences . pp. 1-7.

Chinnamaneni, Satya Vani and Balakrishnakurra, and Chintala, Rambabu and Kavuri, Sethu R and Mukkamala, S Babu (2010) Influence of vitamin B3 on morphosynthesis of CaCO3, BaCO3 and SrCO3 micro and nano structures. Journal of Metallurgy and Materials Science, 52 (4). pp. 351-356.

Chintala, Rajesh and Rath, R K and Kumar, Anil (2017) Effective Utilization of Fly Ash, Iron Ore Slime and LD-Slag in Geopolymer Mortar. Recent Trends in Civil Engineering & Technology, 7(1) . pp. 9-16.

Chintala, Rajesh and Rath, R K and Kumar, Anil (2016) Recovery of Iron Values from Iron Ore Slimes using Reagents. Journal of Materials & Metallurgical Engineering, 6(3) . pp. 32-43.

Choi, Seo-Young and Nguyen, Viet Tu and Lee, Jae-chun and Kang, Ho and Pandey, B D (2014) Liquid–liquid extraction of Cd(II) from pure and Ni/Cd acidic chloride media using Cyanex 921: A selective treatment of hazardous leachate of spent Ni–Cd batteries. Journal of Hazardous Materials, 278 (IF-4.331). pp. 258-266.

Choubey, Pankaj K and Dinkar, Om Shankar and Panda, Rekha and Kumari, Archana and Jha, Manis K and Pathak, D D (2021) Selective extraction and separation of Li, Co and Mn from leach liquor of discarded lithium ion batteries (LIBs). Waste Management, 121 . pp. 452-457.

Choubey, Pankaj K and Kumari, Archana and Jha, Manis K and Pathak, D D (2021) Recovery of Cobalt as Cobalt Sulfate from Discarded Lithium-Ion Batteries (LIBs) of Mobile Phones. Rare Metal Technology 2021 . pp. 47-53.

Choubey, Pankaj K and Kumari , Archana and Jha, Manis K and Pathak, Devendra Deo (2022) Recovery of Cobalt as Cobalt Sulfate from Discarded Lithium-Ion Batteries (LIBs) of Mobile Phones. The Minerals, Metals & Minerals Society 2021 .

Choubey, Pankaj K and Panda, Rekha and Jha, Manis K and Lee, Jae-chun and Pathak, D D (2015) Recovery of copper and recycling of acid from the leach liquor of discarded Printed Circuit Boards (PCBs). Separation and Purification Technology, 156 (IF-3.091). pp. 269-275.

Choubey, Pankaj K and Parween, Rukshana and Panda, Rekha and Dinkar, Om Shankar and Jha, Manis K (2022) Recovery of Lithium from Black Cathode Active Materials of Discarded Lithium-Ion Batteries. The Minerals, Metals & Materials Society 2022 . pp. 739-745.

Choubey, Pankaj K and Singh, Nityanand and Panda, Rekha and Kumar, J Rajesh and Yoo, Kyoungkeun and Park, Ilhwan and Jha, Manis K (2021) Development of Hydrometallurgical Process for Recovery of Rare Earth Metals (Nd, Pr, and Dy) from Nd-Fe-B Magnets. Metals .

Choubey, R and Banerjee, T (1969) Standardisation and design criteria relating to high temperature tensile and creep properties. NML Technical Journal, 11 (1). pp. 17-22.

Choubey, R and Das, M R (1972) An analysis of procedure for acceptance creep testing of ferritic low alloy steels for high temperature service. NML Technical Journal, 14 (4). pp. 137-140.

Choubey, R and Gibbons, T B and Prasad, K (1977) Creep-properties and microstructure of austenitic steels containing manganese. Metals technology, 4 (issue:Nov). pp. 524-529.

Choudhary, B N (2018) Recovery of valuable metals from E-waste. Journal of Metallurgy and Materials Science, 60(2) . pp. 95-103.

Choudhary, B N and Roy, B N and Vaish, A K (2015) Production of foundry grade iron from sponge iron fines. Journal of Metallurgy and Materials Science, 57(4) . pp. 211-224.

Choudhary, B N and Roy, B N and Vaish, A K and Singh, S D (2014) Smelting of sponge iron fines for the production of steel grade iron. Journal of Metallurgy and Materials Science, 15(2) (NON-SCI). pp. 107-116.

Choudhary, B N and Vaish, A K and Roy, B N (2017) Innovation for the production of value added products from sponge iron fines (waste) by simulation of rotary kiln-submerged arc furnace route. Journal of Metallurgy and Materials Science, 59(3) . pp. 127-131.

Choudhary, C and Bar, H N and Arif, S M D and Sahoo, K L and Mandal, D (2023) Effect of Structural Refinement and Modification on the Mechanical Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

Choudhary, C and Bar, H N and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Effect of Strain Induced Melt Activation Process on the Microstructure and Mechanical Properties of Al-5Ti-1B Treated Al-7Si Alloy. Metals and Materials International .

Choudhary, C and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Evaluation of microstructure and mechanical properties of M-SIMA processed Al-7Si alloy. Materials Science and Technology .

Choudhary, C and Sahoo, K L and Mandal, D (2019) The Effect of Thermo-Mechanical Processing on the Microstructure and Mechanical Properties of Modified SIMA Treated Al-7Si Alloy. Light Metals . pp. 241-249.

Choudhary, C and Sahoo, K L and Roy, Himadri and Mandal, D (2021) Effect of Grain Refiner on Microstructural Feature Influence Hardness and Tensile Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

Choudhary, Shyam K and Bhadu, Manish Kumar and Guin, Akshya Kumar and Pramanick, A K and Ghosh, Nabarun and Rout, Tapan Kumar and Das, Sumitesh (2013) Boiling Study of Nanofluid on Graphene Coated Substrate. Journal of Nanofluids, 2 . pp. 1-4.

Choudhury, A and Biswas, D K and Bose, S and Datta, T K (2016) Development of various modules of environment friendly furnaces concerning melting and castings of iron, brass and bell metal products. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 99-131.

Choudhury, A S R and Kumar, Sudhir and Gupta, N and Jana, Animesh and Bhattacharya, P (2024) Mechanochemically Assisted Microwave-Induced Plasma Synthesis of a N-Doped Graphitic Porous Carbon-Based Aqueous Symmetric Supercapacitor with Ultrahigh Volumetric Capacitance and Energy Density. ACS Applied Electronic Materials .

Choudhury, Deepak and Mittal, Kapil (2012) A metallurgical investigation of microstructure of the weld bead in submerged arc welding. Journal of Metallurgy and Materials Science, 54(4) . pp. 311-320.

Choudhury, S B and Khan, Z H and Nag, P S (1979) Investigation of stress corrosion cracking in mild steel stainless steel and brass by stress relaxation technique. NML Technical Journal, 21 (3-4). pp. 30-36.

Choudhury, Samrat Sen and Bandyopadhyay, N R and Pramanick, A K and Bhattacharjee, S (2010) Syntheis and characterization of an aqueous nanometric iron hydroxide suspension suitable for the removal of As(III) and As(V). Journal of Metallurgy and Materials Science, 52 (3). pp. 215-229.

Choudhury, Samrat Sen and Bhattacharjee, S (2011) Application of an aqueous nanometric aluminum oxide suspension for fluoride remediation. Journal of Metallurgy and Materials Science, 53 (4). pp. 355-367.

Choudhury, V N and Mukherjee, B C and Bose, B C and Pandey, L P (1980) Simultaneous chelatometric determination of calcium and magnesium in magnesite. Indian Journal of Technology, 18 (1). pp. 45-46.

Chowdhury, A and Bijalwan, P K and Sahu, Ranjan K (2014) Investigations on the role of alkali to obtain modulated defect concentrations for Cu2O thin films. Applied Surface Science, 289 (IF-2.538). pp. 430-436.

Chowdhury, Susmita and Banerjee, M K and Singh, M N and Basu, D K (2001) Electrochemical studies on painted mild steel based on organic coatings in different media-paper-I. Journal of Metallurgy and materials Science, 43 (4). pp. 253-263.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2016) Comparative assessment of cyclic J-R curve determination by different methods in a pressure vessel steel. Journal of Nuclear Materials, 472 (IF-2.048). pp. 55-64.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Cyclic fracture behaviour of 20MnMoNi55 steel at room and elevated temperatures. Fatigue & Fracture of Engineering Materials & Structures, 38 (IF-1.561). pp. 813-827.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Incremental cyclic fracture behaviour of 20MnMoNi55 steel at room temperature. International Journal of Fracture, 192(1) (IF-1.348). pp. 117-132.

Churyukanovaa, Margarita and Kaloshkin, S and Shuvaeva, E and Mitra, A and Panda, A K and Roy , R K and Murugaiyan, Premkumar and Corte-Leon, P and Zhukova, V and Zhukov, A (2019) The effect of heat treatment on magnetic and thermal properties of Finemet-type ribbons and microwires. Journal of Magnetism and Magnetic Materials, 492 (IF-2.683). p. 165598.

Chvoj, Z and Srikanth, S and Ramachandrarao, P (1999) Thermodynamic limits and kinetic probabilities during homogeneous nucleation in liquid Ag-Cu alloys. Journal of non-equilibrium thermodynamics, 24 (4). pp. 360-371.

Coheur, P (1959) On the Bottom Blown Processes and the LD-AC Process. NML Technical Journal, 1 (1). pp. 105-114.

Colclough, T P (1959) Developments in Blast Furnace Practice. NML Technical Journal, 1 (1). pp. 59-67.

Contractor, G P (1947) National Metallurgical Laboratory of India. Nature, 159 (4033). pp. 219-221.

Contractor, G P (1946) National Metallurgical Laboratory: Foundation-Stone Laying Ceremony, 21st November 1946. Journal of Scientific and Industrial Research, 5 (6). pp. 256-261.

Dar, K K (1973) Lecture-The role of biogeochemical processes in concentration of elements in nature and in extraction of metals from their ores. NML Technical Journal, 15 (4). pp. 7-10.

Darji , S B and Zala , D M and Rajput, U P and Rao, V J and Vaish, A K (2019) Typical self-healing materials-their mechanism and emerging applications. Journal of Metallurgy and Materials Science, 61(3) . pp. 151-160.

Daroonparvara, M R and Mazar Atabaki, M and Vakilipour, A (2011) Corrosion behavior of heat treated nickel-aluminium bronze alloy in artificial seawater. Journal of Metallurgy and Materials Science, 53 (1). pp. 67-84.

Darshit, R S and Bhavsar, S N (2019) Effect of Tool Nose Radius and Machining Parameters on Cutting Force, Cutting Temperature and Surface Roughness-An Experimental Study of Ti-6Al-4V (ELI). Journal of Metallurgy and Materials Science, 61(1) . pp. 25-37.

Das, A and Chaurasia, P K and Mandal, G K and Goecke, S F and De, AMTV (2022) Analytical estimation of thermomechanical distortion and interface layer thickness for gas metal arc lap joining of dissimilar sheets. Welding in the World .

Das, A and Kumar, B and Ahmad, Sheikh Nazir and Paul, S K and Mandal, G K (2021) Formability study of bake hardening steel and its correlation with microstructure. Proceedings of the Institute of Mechanical Engineers Part B-Journal of Engineering Manufacture .

Das, A and Mohapatra, M and Basu, S (2020) Electrochemical application of shape and phase dependant copper sulphide for costeffective next generation supercapacitive energy storage: A review. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 95-102.

Das, A and Tarafder, S and Sivaprasad, S and Chakrabarti, D (2019) Influence of microstructure and strain rate on the strain partitioning behaviour of dual phase steels. Materials Science and Engineering A, 754 . pp. 348-360.

Das, A N and Srivastava, S C and Chatterjee, A K and Pandey, L P (1994) Wavelength dispersive x-ray fluorescence spectrometric analysis of the compositional constituents in blast furnace slag cements. NML Technical Journal, 36 (2). pp. 47-53.

Das, A R and Chowdhury, T and Sivaprasad, S and Bar, H N and Narasaiah, N and Tarafder, S (2016) Influence of dynamic strain ageing on fracture behaviour and stretch zone formation of a reactor pressure vessel steel. International Journal of Fracture, 202(1) (IF-2.247). pp. 79-91.

Das, Anindya and Ghosh, M and Tarafder, S and Chakrabarti, D (2017) Micromechanisms of deformation in dual phase steels at high strain rates. Material Science and Engineering A Structural Materials Properties Microstructure and Processing, 680 (IF-3.094). pp. 249-258.

Das, Arpan (2016) Contribution of deformation-induced martensite to fracture appearance of austenitic stainless steel. Materials Science and Technology, 32(13) (IF-1.180). pp. 1366-1373.

Das, Arpan (2015) Crystallographic variant selection of martensite at high stress/strain. Philosophical Magazine, 95(20) (IF-1.427). pp. 2210-2227.

Das, Arpan (2015) Crystallographic variant selection of martensite during fatigue deformation. Philosophical Magazine, 95(8) (IF-1.427). pp. 844-860.

Das, Arpan (2015) Dislocation configurations through austenite grain misorientations. International Journal of Fatigue, 70 (IF-2.665). pp. 473-479.

Das, Arpan (2018) Enigma of dislocation patterning due to slip in fatigued austenite. International Journal of Damage Mechanics, 27(2) (IF-1.783). pp. 218-237.

Das, Arpan (2017) Grain boundary engineering: fatigue fracture. Philosophical Magazine, 97(11) (IF-1.505). pp. 867-916.

Das, Arpan (2016) Intervention of martensite variants on the spatial aspect of microvoids. Materials Research Express, 3(6) (IF-1.068).

Das, Arpan (2014) Magnetic properties of cyclically deformed austenite. Journal of Magnetism and Magnetic Materials, 361 (IF-2.002). pp. 232-242.

Das, Arpan (2013) Martensite–Void Interaction. Scripta Materialia, 68(7) (IF-2.821). pp. 514-517.

Das, Arpan (2017) Resurgence of texture in cyclically deformed austenite. Materials Characterization, 123 (IF 2.714). pp. 315-327.

Das, Arpan (2014) Slip System Activity During Cyclic Plasticity. Metallurgical and Materials Transactions A, 45 A (7) (IF-1.730). pp. 2927-2930.

Das, Arpan (2016) Spatial Martensite. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 658 (IF-3.094). pp. 484-489.

Das, Arpan and Chakraborti, P C and Tarafder, S and Bhadeshia, H K D H (2011) Analysis of deformation induced martensitic transformation in stainless steels. Materials Science and Technology, 27 (1). pp. 366-370.

Das, Arpan and Chowdhury, T and Tarafder, S (2014) Ductile fracture micro-mechanisms of high strength low alloy steels. Materials & Design, 54 (IF-3.171). pp. 1002-1009.

Das, Arpan and Das, S K and Sivaprasad, S and Tarafder, S (2008) Fracture-property correlation in copper-strengthened high-strength low-alloy steel. Scripta Materialia, 59 (7). pp. 681-683.

Das, Arpan and Das, Swapan K and Tarafder, S (2009) Correlation of Fractographic Features with Mechanical Properties in Systematically Varied Microstructures of Cu-Strengthened High-Strength Low-Alloy Steel. Metallurgical and Materials Transactions A, 40 (13). pp. 3138-3146.

Das, Arpan and Poddar, Palash (2013) Structure–wear-property correlation. Materials & Design, 47 (IF-2.913). pp. 557-565.

Das, Arpan and Roy, Nilima and Ray, Ashok K (2014) Stress induced creep cavity. Materials Science and Engineering A, 598 (IF-2.409). pp. 28-33.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2011) Connection between deformation-induced dislocation substructures and martensite formation in stainless steel. Philosophical Magazine Letters Online ISSN 1362-3036, 91 (10). pp. 664-675.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2008) Correspondence of fracture surface features with mechanical properties in 304LN stainless steel. Materials Science and Engineering: A, 496 (1-2). pp. 98-105.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2011) Morphologies and characteristics of deformation induced martensite during low cycle fatigue behaviour of austenitic stainless steel. Materials Science and Engineering A, 528 (27). pp. 7909-7914.

Das, Arpan and Sivaprasad, S and Ghosh, M and Chakraborti, P C and Tarafder, S (2008) Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel. Materials Science and Engineering A, 486 (1-2). pp. 283-286.

Das, Arpan and Sivaprasad, S and Tarafder, Mita and Das, S K and Tarafder, S (2013) Estimation of Damage in high strength steels. Applied Soft Computing, 13(2) (IF-2.140). pp. 1033-1041.

Das, Arpan and Tarafder, S (2009) Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel. International Journal of Plasticity, 25 (11). pp. 2222-2247.

Das, Arpan and Tarafder, S (2008) Geometry of dimples and its correlation with mechanical properties in austenitic stainless steel. Scripta Materialia, 59 (9). pp. 1014-1017.

Das, Arpan and Tarafder, S and Chakraborti, P C (2011) Estimation of deformation induced martensite in austenitic stainless steels. Materials Science and Engineering A, 529 (1). pp. 9-20.

Das, Avimanyu and Bhattacharyya, K K (2010) An improved process for the beneficiation of fine coking coal from Munidih area. Steel Tech, 4 (July). pp. 29-33.

Das, Avimanyu and Sarkar, B and Biswas, P and Roy, Subrata (2009) Performance prediction of floatex density separator in processing iron ore fines – a relative velocity approach. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 118 (2). pp. 78-84.

Das, Avimanyu and Sarkar, B and Mehrotra, S P (2009) Prediction of separation performance of Floatex Density Separator for processing of fine coal particles. International Journal of Mineral Processing, 91 (1-2). pp. 41-49.

Das, Avimanyu and Sarkar, B and Vidyadhar, A and Roy, Subrata (2010) Efficient Recovery of Combustibles From Coking Coal Fines. Mineral Processing and Extractive Metallurgy Review, 31 (4). pp. 236-249.

Das, Avimanyu and Sarkar, B and Vidyadhar, A and Singh, Alok K and Bhattacharyya, K K (2008) A Novel Beneficiation Scheme for A Medium Coking Coal Fines from India. International Journal of Coal Preparation and Utilization, 28 (4). pp. 189-200.

Das, Avimanyu and Singh, Ratnakar and Bhattacharyya, K K (2011) Split Processing of High Ash Indian Coking Coal Fines Using Jameson Flotation Cell. Mineral Processing and Extractive Metallurgy Review, 32(1) (0.611 (SCI)). pp. 17-23.

Das, Avimanyu and Vidyadhar, A and Mehrotra, S P (2009) A novel flowsheet for the recovery of metal values from waste printed circuit boards. Resources, Conservation and Recycling, 53 (8). pp. 464-469.

Das, B N (1959) Some recent developments in metal working techniques. NML Technical Journal, 1 (4). pp. 34-40.

Das, B N and Basak, P and Nijhawan, B R (1962) Failure of a cold rolling mill roll-a case study. NML Technical Journal, 4 (3). pp. 4-7.

Das, B N and Choubey, R and Goswami, K C (1960) Wear and Friction under Rolling with Slip. NML Technical Journal, 2 (4). pp. 15-21.

Das, B N and Ghose, B N (1969) Investigation into the cause of failure of pinion shaft-a case study. NML Technical Journal, 11 (1). pp. 23-27.

Das, B N and Ghosh, B N (1966) Failure of a bucket wheel gear drive shaft-a case study. NML Technical Journal, 8 (3). pp. 15-18.

Das, Bappaditya and Kundu, Rajen and Chakravarty, Sanchita (2022) Preparation and characterization of graphene oxide from coal. Materials Chemistry and Physics, 290 (4.778). p. 126597.

Das, Bhaskar and Hossain, S M and Nandi, A and Samanta, Debabrata and Pramanick, A K and Chapa, S O M and Ray, M (2022) Spectral conversion by silicon nanocrystal dispersed gel glass: efficiency enhancement of silicon solar cell. Journal of Physics D- Applied Physics, 55(2) .

Das, Bhaskar and Hossain, S M and Pakhira, B and Pramanick, A K and Das, Rahul and Ray, M (2020) Fluorescence quenching based detection of p-nitrophenol using luminescent silicon nanocrystals and insights into the quenching mechanism. Semiconductor Science and Technology, 35(3) (IF-2.361). 035003 .

Das, C R and Albert, S K and Laha, K and Swaminathan, J and Ravi, S and Bhaduri, A K and Murty, B S and Mayer, P (2014) Influence of Coincidence Site Lattice Boundary on Creep Resistance of P91 Steel Weldments. Procedia Engineering, 86 (NIF-0.629). pp. 80-87.

Das, C R and Albert, S K and Swaminathan, J and Bhaduri, A K and Murty, B S (2013) Effect of Boron on Creep Behaviour of Inter-critically Annealed Modified 9Cr-1Mo Steel. Procedia Engineering, 55 . pp. 402-407.

Das, C R and Albert, S K and Swaminathan, J and Bhaduri, A K and Raj, B and Murty, B S (2012) Improvement in creep resistance Of modified 9Cr-1Mo steel weldment By boron addition. WELDING IN THE WORLD, 56 (07-08). pp. 10-17.

Das, C R and Albert, S K and Swaminathan, J and Raju, S and Bhaduri, A K and Murty, B S (2012) Transition of Crack from Type IV to Type II Resulting from Improved Utilization of Boron in the Modified 9Cr-1Mo Steel Weldment. Metallurgical and Materials Transactions A, 43A . pp. 3724-3741.

Das, G S and Khanna, A S (2005) Role of corrosion product on the protectiveness of corrosion layers for microalloyed pipline steel. Journal of Metallurgy and Materials Science, 47 (1). pp. 39-44.

Das, Goutam and Chakravarty, S and Datta, A K and Das, Swapan K and Gupta, K K and Ghosh, R N (2006) Failure analysis of a high mast lamp post. Engineering Failure Analysis, 13 (7). pp. 1153-1158.

Das, Goutam and Das, Mousumi and Ghosh, Sabita and Dubey, A K (2010) Effect of aging on mechanical properties of 6063 Al-alloy using instrumented ball indentation technique. Materials Science and Engineering: A, 527 (6). pp. 1590-1594.

Das, Goutam and Das, Mousumi and Sinha, Satish and Gupta, K K and Chakravarty, S and Ray, Ashok K (2009) Characterization of cast stainless steel weld pools by using ball indentation technique. Materials Science and Engineering: A, 513-514 . pp. 389-393.

Das, Goutam and Ghosh, Sabita and Bose, S C and Ghosh, Sukomal (2006) Use of ball indentation technique to evaluate room temperature mechanical properties of a gas turbine blade. Materials Science and Engineering A, 424 (1-2). pp. 326-332.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal (2006) Structure–property correlation of EN steel and evaluation of mechanical properties through BIT. NDT & E International, 39 (2). pp. 155-161.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal and Ghosh, R N (2005) Materials characterization and classification on the basis of materials pile-up surrounding the indentation. Materials Science and Engineering A, 408 (1-2). pp. 158-164.

Das, Goutam and Ghosh, Sabita and Sahay, S K (2005) Use of ball indentation technique to determine the change of tensile properties of SS316L steel due to cold rolling. Materials Letters, 59 (18). pp. 2246-2251.

Das, Goutam and Ghosh, Sabita and Sahay, S K and Ranganath, V R and Vaze, K K (2003) Development and validation of ball indentation technique to evaluate the mechanical properties of materials. Transactions Of The Indian Institute Of Metals , 56 (5). pp. 465-475.

Das, Goutam and Ghosh, Sabita and Sahay, S K and Ranganath, V R and Vaze, K K (2004) Influence of pre-straining on mechanical properties of HSLA steel by using ball indentation technique. Zeitschrift Fur Metallkunde, 95 (12). pp. 1120-1127.

Das, Goutam and Ghosh, Sukomal and Ghosh Chowdhury, S and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Investigation of sub-surface cracks in continuous cast billets. Engineering Failure Analysis, 10 (3). pp. 363-370.

Das, Goutam and Ghosh Chowdhury, S and Ray, Ashok K and Das, Swapan K and Bhattacharya, D K (2002) Failure of a super heater tube. Engineering Failure Analysis, 9 (5). pp. 563-570.

Das, Goutam and Ghosh Chowdhury, S and Ray, Ashok K and Das, Swapan K and Bhattacharya, D K (2003) Turbine blade failure in a thermal power plant. Engineering Failure Analysis, 10 (1). pp. 85-91.

Das, Goutam and Rao, V and Joarder, A and Mohanty, O N and Murthy, S G N and Mitra, A (1995) Magnetic characterization of 5cr-0.5Mo steel used in-process heater tubes. Journal of Physics D-Applied Physics, 28 (11). pp. 2229-2234.

Das, Goutam and Rao, Venkatesh and Joarder, A and Mohanty, O N and Murthy, S G N and Mitra, A (1995) Magnetic characterization of 5Cr-0.5Mo steel used in process 1 heater tubes. Journal of Physics D: Appl. Phys., 28 . pp. 2229-2234.

Das, Goutam and Ray, Ashok K and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Fatigue failure of a boiler feed pump rotor shaft. Engineering Failure Analysis, 10 (6). pp. 725-732.

Das, Goutam and Sinha, A N and Mishra, Suman K and Bhattacharya, D K (1999) Failure analysis of counter shafts of a centrifugal pump. Engineering Failure Analysis, 6 (4). pp. 267-276.

Das, H K and Basak, Sushovan and Das, Goutam and Pal, T K (2013) Influence of Energy Induced from Processing Parameters on the Mechanical Properties of friction stir welded lap joint of Aluminium to Coated Steel Sheet. The International Journal of Advanced Manufacturing Technology, 64(9-12) (IF-1.205). pp. 1653-1661.

Das, K P and Ganguly, S and Chattopadhyay, P P and Tarafder, S and Bandopadhyay, N R (2009) Exploring The Possibilities Of Development Of Directly Quenched TRIP-Aided Steel By The Artificial Neural Networks (ANN) Technique. Materials and Manufacturing Processes, 24 (1). pp. 68-77.

Das, L N (1985) High-accuracy temperature-measurement in creep testing of steels. Research and Industry, 30 (4). pp. 424-428.

Das, L N (1994) Ultrasonic acoustic transducers for underwater acoustic measurements. Ocean Technology Perspectives , 47 (1). pp. 57-66.

Das, L N and Kumar, S and Agadi, W and Das, V K and Desai, B N (1994) Ultrasonic acoustic transducers for underwater acoustic measurements. Ocean Technology Perspectives . pp. 625-629.

Das, M R and Gibbons, T B (1976) Diffusion creep in low-alloy steels. Scripta Metallurgica, 10 (3). pp. 231-233.

Das, Mousumi and Das, Goutam (2011) Role of dynamic precipitation on the strengthening mechanism of cryorolled 6063 Al alloy. Transactions of the Indian Institute of Metals, 64 (1-2). pp. 75-79.

Das, Mousumi and Das, Goutam and Ghosh, M and Wegner, Matthias and Rajnikanth, V and Ghosh Chowdhury, S and Pal, T K (2012) Microstructures and mechanical properties of HPT processed 6063 Al alloy. Materials Science and Engineering A, 558 (IF-2.108). pp. 525-532.

Das, Mousumi and Pal, T K and Das, Goutam (2012) Effect of aging and cryo rolling on microstructural chara-cterization and mechanical properties of precipitation hardenable 6063Al alloy. Material Science & Engineering, 552 (30). pp. 31-35.

Das, Mousumi and Pal, T K and Das, Goutam (2012) Use of Portable Automated Ball Indentation System to Evaluate Mechanical Properties of Steel Pipes. Transactions of the Indian Institute of Metals, 65 (2). pp. 197-203.

Das, Moususmi and Das, G and Ghosh, M (2022) Prediction of Mechanical Properties of Sensitized Stainless Steel by Neural Network Modeling and Validation Using Ball Indentation Test. J Mats. Engg & Performance .

Das, N and Pandey, M C and Ghosh, R N (1998) High temperature creep behaviour of single crystal superalloy. Material Science and Technology, 14 (5). pp. 429-434.

Das, N and Singh, K K and Maiti, H S (2002) Preparation of alumina membranes for micro- and ultrafiltration applications. British Ceramic Transactions, 101 (5). pp. 208-212.

Das, N K and Balasundaram, L J (1973) High-strength Fe-Al-Si alloys. Indian Journal of Technology, 11 (12). pp. 628-634.

Das, N K and Mahanti, R K and Sivaramakrishnan, C S and Kumar, Rajendra (1982) Effect of 2-phase solidification on fracture-toughness of aluminum-alloys. Indian Journal of Technology, 20 (11). pp. 434-437.

Das, N K and Balasundaram, L J (1971) Some Experiences in Melting with Electron Beam Melting Furnace. NML Technical Journal, 13(3) . pp. 83-86.

Das, N N and Dash, A and Brahama, G S and Mohapatra, P (2003) Synthesis, characterisation and dissociation of a glycinate bridged trinuclear Co(III)-Cu(II)-Co(III) complex. Inorganic Reaction Mechanisms , 5 (1). pp. 73-77.

Das, N N and Jana, R K (2006) Adsorption of some bivalent heavy metal ions from aqueous solutions by manganese nodule leached residues. Journal of Colloid and Interface Science, 293 (2). pp. 253-262.

Das, N N and Konar, J and Mohanta, M K and Srivastava, V C (2004) Adsorption of Cr(VI) and Se(IV) from their aqueous solutions onto Zr4+-substituted ZnAl/MgAl-layered double hydroxides: effect of Zr4+ substitution in the layer. Journal of Colloid and Interface Science, 270 (1). pp. 1-8.

Das, N N and Konar, J and Mohanta, M K and Upadhyay, A K (2010) Synthesis, characterization and adsorptive properties of hydrotalcite-like compounds derived from titanium rich bauxite. Reaction Kinetics, Mechanisms and Catalysis, 99 (1). pp. 167-176.

Das, N N and Pattanaik, Pragyan and Das, Rita (2005) Defluoridation of drinking water using activated titanium rich bauxite. Journal of Colloid and Interface Science, 292 (1). pp. 1-10.

Das, N N and Samal, Amrendra (2004) Synthesis, characterisation and rehydration behaviour of titanium(IV) containing hydrotalcite like compounds. Microporous and Mesoporous Materials, 72 (1-3). pp. 219-225.

Das, N N and Srivastava, S C (2002) Catalytic Characterization of Bi-functional Catalysts Derived from Pd--Mg--Al Layered Double Hydroxides. Bulletin of Material Science, 25 (4). pp. 283-289.

Das, P K and Mishra, D and Anand, S and Das, R P (1999) Reduction of Mn(IV)oxide by (NH4)2 SO3 in the presence of metal ions in ammoniacal medium. Hydrometallurgy, 52 . pp. 91-104.

Das, R R and Dubey, R K and Gupte, P K (1971) Studies on mould wall movement of nodular iron castings in green sand mould. NML Technical Journal, 13 (1). pp. 8-13.

Das, S and Metya, Avijit Kumar and Das, T K and Murugaiyan, Premkumar and Roy, Rajat K and Mahato, D K and Panda, A K (2022) Transduction Efficiency of a Magnetostrictive Sensor for the Generation of Guided Waves in Pipes Using Rapidly Quenched Amorphous Ribbons. IEEE Transaction on Magnetics, 58(6) .

Das, S and Murugaiyan, Premkumar and Roy, Rajat K and Mahato, D K and Panda, Ashis K (2023) Impact of Bounding Media on the Attenuation Characteristics of Magnetostrictive Signal Obtained from Pipe Embedded in Soil and Sand. Journal of Nondestructive Evaluation, 42(3) .

Das, S K and Biswas, A and Ghosh, R N (1993) Volume fraction dependent particle coarsening in plain carbon steel. Acta Metallurgica et Materialia, 41 (3). pp. 777-781.

Das, S K and Chatterjee, M K (1993) Specific surfaces and heat of adsorption of some Indian clays by dye-adsorption technique. Bulletin of Materials Science, 16 (3). pp. 205-211.

Das, S K and Daspoddar, P K (1997) Dehydration kinetics of hydrated calcium dialuminate. Thermochimica Acta, 293 (1-2). pp. 125-128.

Das, S K and Kumar, Sanjay and Daspoddar, P K (1997) Crystal morphology of calcium aluminates hydrated for 14 days. Journal of Materials Science Letters, 16 (9). pp. 735-736.

Das, S K and Kumar, Sanjay and Poddar, P K D (1997) Effect of synthetic refractory aggregates on the hydraulic and other properties of commercial high alumina cement. Industrial Ceramics, 17 (1). pp. 17-22.

Das, S K and Kumar, Sanjay and Ramachandrarao, P (2000) Exploitation of iron ore tailing for the development of ceramic tiles. Waste Management, 20 (8). pp. 725-729.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) The effect of cooling rate on structure and properties of a HSLA forging. Scripta Materialia, 48 (1). pp. 51-57.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) Microstructural characterization of controlled forged HSLA-80 steel by transmission electron microscopy. Materials Characterization, 50 (4-5). pp. 305-315.

Das, Samar and Ghosh, Arindam and Kundu, Sukumar and Chatterjee, S (2004) A study on structure and properties of a hot forged HSLA-80 steel. Transactions of the Indian Institute of Metals, 57 (1). pp. 25-33.

Das, Samar and Joarder, A (1997) Effect of long-term service exposure at elevated temperature on microstructural changes of 5Cr-0.5Mo steels. Metallurgical and Materials Transactions A, 28 (8). pp. 1607-1616.

Das, Samar K and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2002) Evolution of microstructure in an ultra-low carbon Cu bearing HSLA forging. Scandinavian Journal Of Metallurgy, 31 (4). pp. 272-280.

Das, Sanjeev and Prasad, Ranjit and Singh, R P and Abhilash, (2017) Physical, Mechanical and Metallurgical Characteristics of Banded Hematite Jasper of Ghatkuri (Gua), Jharkhand. Journal of Geological Society of India, 90(5) (IF-0.479). pp. 623-627.

Das, Suchandan K (2011) Application of a stochastic modelling framework to characterize the influence of different oxide scales on the solid particle erosion behaviour of boiler grade steel. Sadhana, 36 (4). pp. 425-440.

Das, Suchandan K (2001) Evaluation of solid-liquid interface profile during continuous casting by a spline based formalism. Bulletin of Materials Science, 24 (4). pp. 373-378.

Das, Suchandan K (1997) Function space theory of dynamic nucleation during solidification at high cooling rates. Bulletin of Materials Science, 20 (5). pp. 643-650.

Das, Suchandan K (1993) Mathematical investigation of the flow profile sensitivity of the electromagnetic velocimeter for metallurgical fluid-flow measurements. Transactions of the Indian Institute of Metals, 46 (3). pp. 141-145.

Das, Suchandan K (2012) Mathematical model to predict effects of fly ash hardness and angularity on erosion response of typical boiler grade steels. Tribology, 6 (2). pp. 84-92.

Das, Suchandan K (2001) Mathematical modelling of flow field in a continuous slab caster tundish including near wall turbulence effects. Transactions of the Indian Institute of Metals, 54 (1-2). pp. 21-26.

Das, Suchandan K (1994) Mathematical simulation of the thermal Field during continuous casting process by a nonorthogonal coordinate Transformation formalism. Transaction of Indian Institute of Metals, 47 (1). pp. 57-66.

Das, Suchandan K (1993) Mathematical-modeling of transport phenomena in electrolysers with internal electrolyte recirculation. Bulletin of Electrochemistry, 9 (8-10). pp. 526-529.

Das, Suchandan K (2013) Neural network modelling of flow stress and mechanical properties for hot strip rolling of TRIP steel using efficient learning algorithm. Ironmaking and Steelmaking, 40(4) (IF- 0.559). pp. 298-304.

Das, Suchandan K (1993) Numerical formalism for solving heat transfer in continuous casting process by nonorthogonal co-ordinate transformation strategy. Scandinavian Journal Of Metallurgy, 22 . pp. 198-202.

Das, Suchandan K (1993) Numerical formalism for solving heat-transfer in continuous-casting process by nonorthogonal coordinate transformation strategy. Scandinavian Journal Of Metallurgy, 22 (4). pp. 198-202.

Das, Suchandan K (1996) Numerical modelling of the free boundary problem in levitation melting under continuous casting conditions. Scandinavian Journal of Metallurgy, 25 (5). pp. 187-192.

Das, Suchandan K (1995) Process modelling of electromagnetic Stirring and segregation during continuous Casting of high carbon steel. Metals Materials And Processes, 7 (3). pp. 191-204.

Das, Suchandan K (1999) Quantum mechanistic isomorphism of transient nucleation during rapid solidification processes. Transactions of the Indian Institute of Metals, 52 (4). pp. 205-210.

Das, Suchandan K (1999) Simulation of free boundary problem in electromagnetic levitation melting of metals in cold crucibles. Transactions of the Indian Institute of Metals, 52 (4). pp. 197-203.

Das, Suchandan K (1999) Thermal modelling of DC continuous casting including submould boiling heat transfer. Applied Thermal Engineering, 19 (8). pp. 897-916.

Das, Suchandan K (2001) Tracking of solidification profile during continuous casting by a spline based collocation algorithm. Transactions of the Indian Institute of Metals, 54 (1-2). pp. 69-73.

Das, Suchandan K (2003) Transport phenomena and process modelling issues in mineral processing operations. Transactions Of The Indian Institute Of Metals , 56 (3). pp. 269-279.

Das, Suchandan K and Godiwalla, K M (2000) High speed continuous casting of steel - A technological challenge in India. Journal of Metallurgy and materials Science., 42 (2). pp. 81-92.

Das, Suchandan K and Godiwalla, K M (2004) Mathematical modelling of carbonisation in Metallurgical coke making process. Metals Materials And Processes, 16 (2-3). pp. 327-338.

Das, Suchandan K and Godiwalla, K M (2006) Mathematical modelling of thermal transport processes in Coke oven. 18th National & 7th ISHMT - ASME Heat and Mass Transfer Conference . pp. 2154-2161.

Das, Suchandan K and Godiwalla, K M (2003) Phase-field approach - A paradigm shift in metallurgical solidification modelling. Indian Foundry Journal, 49 (7). pp. 17-22.

Das, Suchandan K and Godiwalla, K M and Hedge, Shubha S and Mehrotra, S P and Dey, P K (2008) A mathematical model to characterize effect of silica content in the boiler fly ash on erosion behaviour of boiler grade steel. Journal of Materials Processing Technology, 204 . pp. 239-247.

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P (2007) A mathematical model for prediction of physical properties of the coke oven charge during carbonisation. High Temperature Materials and Processes, 26 (1). pp. 43-57.

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P and Chatterjee, Amit and Krishnan, S H and Choudhary, P C (2005) Mathematical modelling of volatile matter evolution during carbonisation in metallurgical coke ovens. High Temperature Materials And Processes , 24 (5). pp. 301-314.

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P and Dey, P K (2006) Mathematical modelling of erosion behaviour of impacted fly ash particles on coal fired boiler components at elevated temperature. High Temperature Materials And Processes , 25 (5-6). pp. 323-335.

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P and Sastry, K K M and De, P K (2006) Analytical model for erosion behaviour of impacted fly-ash particles on coal-fired boiler components. Sadhana, 31 (5). pp. 583-595.

Das, Suchandan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharyya, K K and Singh, Ratnakar and Mehrotra, S P (2007) Mathematical modeling of separation characteristics of a coal-washing spiral. International Journal of Mineral Processing, 84 (1-4). pp. 118-132.

Das, Suchandan K and Goel, R P and Mehrotra, S P (2006) Mathematical Modelling of Blast Furnace Processes for Characterisation of the Internal State. Steel Tech, 1 (1). pp. 25-33.

Das, Suchandan K and Hedge, Shubha S and Dey, P K and Mehrotra, S P (2008) Erosion-Oxidation Response of Boiler Grade Steels: A Mathematical Investigation. Research Letters in Materials Science (542161). pp. 1-4.

Das, Suchandan K and Hedge, Shubha S and Godiwalla, K M and Mehrotra, S P and Dey, P K (2008) A Probabilistic Model to Characterize Erosion-Oxidation Damage on Boiler Grade Steel Impacted by Solid Particle. Journal Of Tribology, 130 . 041601-1.

Das, Suchandan K and Hedge, Shubha S and Godiwalla, K M and Mehrotra, S P and Dey, P K (2008) A probabilistic model to characterize erosion-oxidation damage on boiler grade steel impacted by solid particle. Journal Of Tribology-Transactions Of The Asme , 130 (4). 041601.

Das, Suchandan K and Kumar, Sanjay and Ramachandrarao, P (2000) Recovery Exploitation of iron ore tailing for the development of ceramic tiles. Waste Management , 20 (8). pp. 725-729.

Das, Suchandan K and Kumari, Amrita and Bandopadhay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furna. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Das, Suchandan K and Kumari, Amrita and Bandyopadhyay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furnace. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Das, Suchandan K and Mandal, D and Sahoo, K L (2015) Neural Modeling and Experimental Investigation of the Erosion Characteristics of Boiler Grade Steels Impacted by Fly Ash. Journal of Materials Engineering and Performance, 24(9) (IF-0.998). pp. 3513-3526.

Das, Suchandan K and Sarkar , A (1996) Computational modelling of thermal transport phenomena in continuous casting process based on non-orthogonal control volume approach. Communications in Numerical Methods in Engineering, 12 (10). pp. 657-671.

Das, Swapan K and Bhattacharya, D K (2003) Corrosion failure of Zn–Al detonator housing. Engineering Failure Analysis, 10 (6). pp. 639-643.

Das, Swapan K and Chatterjee, S and Tarafder, S (2009) Effect of microstructures on deformation behaviour of high-strength low-alloy steel. Journal of Materials Science, 44 (4). pp. 1094-1100.

Das, Swapan K and Chatterjee, S and Tarafder, S (2006) Tensile fracture behaviour of microstructurally engineered Cu bearing high strength low alloy steel. Materials Science and Technology, 22 (12). pp. 1409-1414.

Das, Swapan K and Daspoddar, P K (1993) Some studies on the hydraulic activity of calcium aluminates. NML Technical Journal, 35 (3-4). pp. 29-38.

Das, Swapan K and Ghosh, R N and Sondhi, S K (2012) Prediction of carbide free layer formation in Fe-Ni Cr austentic steel process heater tube. Corrosion Engineering, Science and Technology, 47 (2). pp. 121-124.

Das, Swapan K and Joarder, A and Mitra, A (2004) Magnetic Barkhausen emissions and microstructural degradation study in 1.25 Cr–0.50 Mo steel during high temperature exposure. NDT & E International, 37 (3). pp. 243-248.

Das, Swapan K and Mitra, A and Daspoddar, P K (1996) Thermal analysis of hydrated calcium aluminates. Journal of Thermal Analysis, 47 (3). pp. 765-774.

Das, Swapan K and Mukhopadhyay, N K and Ravi Kumar, B and Bhattacharya, D K (2007) Failure analysis of a passenger car coil spring. Engineering Failure Analysis, 14 (1). pp. 158-163.

Das, Swapan K and Munda, Parikshit and Ghosh Chowdhury, S and Das, Goutam and Singh, Raghuvir (2014) Effect of microstructures on corrosion and erosion of an alloy steel gear pump. Engineering Failure Analysis, 40 (IF-1.130). pp. 89-96.

Das, Swapan K and Narasaiah, N and Sivaprasad, S and Chatterjee, S and Tarafder, S (2007) Effect of aging on fatigue crack growth behaviour of Cu bearing HSLA-100 steel. Materials Science and Technology, 23 (2). pp. 177-182.

Das, Swapan K and Ravi Kumar, B and Bhattacharya, D K and Chattoraj, I (2000) Stress corrosion cracking in an Al-bronze chlorine gas regulating valve. Engineering Failure Analysis, 7 (4). pp. 229-237.

Das, Swapan K and Sasikumar, C and Ravi Kumar, B (2007) Failure of evaporator tubes initiated by lamellar tearing during the commissioning of a waste heat recovery boiler. Engineering Failure Analysis, 14 . pp. 262-278.

Das, Swapan K and Sivaprasad, S and Das, S and Tarafder, S (2006) The effect of variation of microstructure on fracture mechanics parameters of HSLA-100 steel. Materials Science and Engineering A, 431 (1-2). pp. 68-79.

Das, Swapan K and Tarafder, S and Panda, A K and Chatterjee, S and Mitra, A (2007) Magnetic and mechanical properties of Cu-strengthened aged HSLA-100 steel. Philosophical Magazine, 87 (32). pp. 5065-5078.

Das, T K and Banerjee, P and Mandal, S K (2016) Giant magnetoimpedance intrinsic impedance and voltage sensitivity of rapidly solidified Co66Fe2Cr4Si13B15 amorphous wire for highly sensitive sensors applications. Applied Physics A-Materials Science & Processing, 122(11) (IF-1.455).

Das, T K and Dutta, Chandan and Kumar, Alok and Kadu , Satish and Palit Sagar, S (2020) Real-Time Parametric Evaluation ofWeld in Metallic Wires: A 3-D Simulation and Experimental Validation. Journal of Nondestructive Evaluation, 39(2) (IF-1.950). p. 35.

Das, T K and Mandal, S K and Panda, A K and Bhattacharya, S and Banerji, Pallab and Mitra, A (2014) Giant Magnetoimpedance (GMI) Effect and Field Sensitivity of Ferrofluid Coated Co66Fe2Si13B15Cr4 Soft Magnetic Amorphous Microwire. Physics Procedia, 54 (NIF-0.629). pp. 16-22.

Das, T K and Mitra, A and Mandal, S K and Roy, Rajat K and Banerji, Pallab and Panda, A K (2014) Parametric controls on giant magnetoimpedance (GMI) behaviour of CoFeSiBCr amorphous wires for prospective sensor applications. Sensors and Actuators A-Physical , 220 (IF-1.841). pp. 382-387.

Das, T K and Panda, A K and Mitra, A and Banerji, Pallab and Mandal, S K (2014) Rapidly solidified CoFeSiBCr amorphous wire : From manipulation to giant magnetoimpedance sensor applications. 195 Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 195-202.

Das, Tuhin and Saha, Rajib and Bera, Supriya and Dahmen, Kirsten and Ghosh, M and Haldar, A and Bleck, Wolfgang and Ghosh Chowdhury, S (2015) Effect of High Tensile Strain Rate on the Evolution of Microstructure in Fe-Mn-C-Al Twinning-Induced Plasticity (TWIP) Steel. Metallurgical and Materials Transactions A, 46A (1) (IF-1.730). pp. 6-11.

Das , B and Hossain, S M and Pramanick, A K and Dey, A and Ray, M (2019) One-Pot Synthesis of Gel Glass Embedded with Luminescent Silicon Nanoparticles. ACS Applied Materials & Interfaces, 11(2) . pp. 2507-2515.

Das Bakshi, Srimanta and Basu, Bikramjit and Mishra, Suman K (2006) Fretting wear properties of sinter-HIPed ZrO2–ZrB2 composites. Composites Part A Applied Science and Manufacturing, 37 (10). pp. 1652-1659.

Das Bakshi, Srimanta and Basu, Bikramjit and Mishra, Suman K (2006) Microstructure and mechanical properties of sinter-HIPed ZrO2–ZrB2 composites. Composites Part A Applied Science and Manufacturing, 37 (11). pp. 2128-2135.

Das Chakraborty, S and Kumar, U and Bhattacharya, P and Mishra, T (2024) Tailoring of Visible to Near-Infrared Active 2D MXene with Defect-Enriched Titania-Based Heterojunction Photocatalyst for Green H2 Generation. ACS Applied Materials & Interfaces, 16(2) . pp. 2204-2215.

Dasgupta, A and Randhawa, N S and Chandrashekhar, S and Goyal, RP (2016) Filtration studies for separation of solid particles from slurry generated in hydrometallurgical processing of ores and concentrates. Journal of Metallurgy and Materials Science, 58(2) (IF-0.04). pp. 69-79.

Dasgupta, P and Bhattacharjee, S (1993) Prediction of boiling point of halomethanes by atomic contribution method and their correlation with geometric volume. Chemical Engineering Science, 48 (8). pp. 1535-1538.

Datar, N S and Reddy, S C and Chattopadhyay, R and Guha, B K and Bhatnagar, S S (1974) Industrial scale trails on niobium treated high strength low alloy structural steel. NML Technical Journal, 16 (2). pp. 1-4.

Datta, A K (2002) Characterization of deformation behavior by load drop phenomena at hot working temperature: A new approach. Journal of Metallurgy and materials Science., 44 (1). pp. 31-37.

Datta, A K (2001) Evaluation of RCC bridge and present practices of bridge management system. Journal of Metallurgy and materials Science, 43 (4). pp. 273-280.

Datta, A K and Das, Goutam and De, P K (2006) Finite element modelling of steel rolling process. Journal of Metallurgy and Materials Science, 48 (3). pp. 173-180.

Datta, A K and Das, Goutam and De, P K (2006) Steel production in India and its impact in construction - A review. Journal of Metallurgy and Materials Science, 48 (4). pp. 205-214.

Datta, A K and Das, Goutam and De, P K and Ramachandrarao, P and Mukhopadhyay, M (2006) Finite element modeling of rolling process and optimization of process parameter. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing , 426 (1-2). pp. 11-20.

Datta, A K and Mandal, D and Sahoo, K L (2011) Measuring uncertainties of metal working processes in computational simulations : A novel approach. Journal of Metallurgy and Materials Science, 53 (2). pp. 183-187.

Datta, A K and Sivaprasad, S and Bar, H N and Halder, N and Prasad, P (2015) Estimation of available in-elastic dissipation energy of high tensile steels against earthquake excitations. Journal of Metallurgy and Materials Science, 57(4) . pp. 197-209.

Datta, A K and Sivaprasad, S and Prasad, P (2017) Free vibration analysis and shape optimization of offshore tubular structures. Journal of Metallurgy and Materials Science, 59(3) . pp. 133-141.

Datta, A K and Sivaprasad, S and Prasad, P (2016) System approach of modeling of high rise steel structures against earthquake excitations. Journal of Metallurgy and Materials Science, 58(1) (IF-0.04). pp. 25-33.

Datta, S S and Srinivasan, T M and Grebenkin , G A and Bhagat , R P and Das, A and Aswath, H S and Banerjee, S (1984) Laboratory Investigation of the Optimum Regime for Sinter returns during Iron Ore Sintering. Steel India, 7(1) . pp. 32-38.

Dayana, A M and Williams, R V (2018) Structural, optical and electrical description of camphor sulfonic acid diped poly (2, 5-dimetoxyaniline) thin film. Journal of Metallurgy and Materials Science, 60(3) . pp. 149-155.

De, Amit Kumar and Dey, Shobhana (2021) Establishment of transition point in operating mode for Constant Current Constant Voltage (CC-CV) charging of Li-ion batteries. World Journal of Advanced Engineering Technology and Sciences, 3(1) . pp. 72-84.

De, J and Bhattacharjee, S and Dhar, S and Acharyya, S K and Gupta, S K and Tarafder, S (2014) Finite Element Simulation of Multi-Axial Low Cycle Fatigue of Material SA333. Procedia Engineering, 86 (NIF-0.629). pp. 158-165.

De, Santanu and Palit Sagar, S and Dey, Swapna and Prakash, Amit and Chattoraj, I (2010) Quantification of pitting in two tempers of 7075 aluminium alloy by non-destructive evaluation. Corrosion Science, 52 (5). pp. 1818-1823.

De, Subhabrata and Bhattacharya, J (2014) Dependence of bioremediation performance of acid mine drainage on substrate characteristics. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 203-207.

Deb, Arnab and Sarma, Deepankar and Banerjee, M K (2005) Current attenuation test (Cat) survey for impressed current cathodic protection service for underground crude oil pipelines. Journal of Metallurgy and Materials Science, 47 (4). pp. 207-214.

Deb, Arnab and Sarma, Deepankar and Banerjee, M K (2005) Significance of logarithmic averaging of soil resistivity data for underground piplines using impressed current cathodic protection system. Journal of Metallurgy and Materials Science, 47 (3). pp. 169-176.

Deb, M K and Verma, D and Verma, S K and Bodhankar, N and Sircar, J K (2010) Quantitative analysis of inorganic ions in soil employing diffuse reflectance Fourier transform infrared spectroscopy (DRS-FTIR). Journal of the Indian Chemical Society, 87 (11). pp. 1317-1327.

Deb, P and Ghosh, S and Basumallick, A (2001) Preparation of nano-sized CoFe2O4 particles from a non-aqueous precursor. Journal of Metallurgy and materials Science, 43 (2). pp. 113-117.

Debnath, P C and Banerjee, N G and Kar, B C (1963) Determination of Hydrogen in Metals and Alloys by carrier gas method. NML Technical Journal, 5 (3). pp. 25-27.

Deepa , A and Gopinathan , C and Pandi , P (2019) Investigation on oxide multilayer thin fines solar cells. Journal of Metallurgy and Materials Science, 61(2) . pp. 73-81.

Deole, G S and Tambavekar, A S and Baviskar, V R and Sable, S R and Chitale, M M and Nimbalkar, V M (2014) Development of novel Al-alloy (Al-5Mg)/10Wt.%TiB 2 metal matrix composites by in-situ reaction synthesis. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 179-186.

Deole, G S and Tambavekar, A S and Baviskar, V R and Sable, S R and Chitale, M M and Nimbalkar, V M (2014) Wear behavior of Al-Alloy (Al-5Mg) in-situ reinforced TiB particulate. 217 Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 217-222.

Deshpande, Pravin P and Vagge, Shashikant T and More, Mahendra A and Kelkar, Sarika A (2011) Galvano static deposition of conducting poly (o-toluidine -co-o-anisidine) coating on low carbon steel and its corrosion performance. Journal of Metallurgy and Materials Science, 53 (3). pp. 269-274.

Dev, S C and Basak, O and Mohanty, O N (1993) Development of cadmium-free silver metal-oxide contact materials. Journal of materials science, 28 (24). pp. 6540-6544.

Dev, S C and Basak, P and Dubey, R K (1985) Development of silver-silver cadmium composite for electrical contacts. NML Technical Journal, 27 (1-2). pp. 9-13.

Dev, S C and Basak, P and Mohanty, O N (1992) Cadmium-free silver composite contacts by roll-cladding. Transactions of the indian institute of metals, 45 (3). pp. 185-188.

Dev, S C and Basak, P and Singh, Inder and Dubey, R K (1992) A copper-base brazing alloy for electronics industries. Journal of Materials Science, 27 (24). pp. 6646-6652.

Dev, S C and Mohanty, O N (1994) Rapidly solidified low-silver brazing filler alloy foils. Journal of Materials Science, 29 (23). pp. 6329-6334.

Dev, S C and Singh, Inder and Basu, D K (1997) Corrosion behaviour of silver brazing alloys in different environments. Anti-corrosion methods and materials, 44 (4). 260- .

Dev, S C and Sivaramakrishnan, C S (1996) An indigenous technology for a silver brazing alloy. Materials & Design, 17 (2). pp. 75-78.

Deva, A and Pandey, P and Alam, M S and Sahoo, Biraj K and Kumar, B Ravi and Choudhary, S G and Jha, B K (2021) Processing of Low-Carbon Deep-Drawing Steel with High Plastic Anisotropy Using Two-Stage Batch Annealing Cycle. Journal of Materials Engineering and Performance .

Deva, Anjana and Sahoo, Biraj K and Chowdhury, S G (2023) Boron Containing Low Carbon Deep Drawing Continuous Annealed Steel Sheet with Improved Plastic Anisotropy. Transactions of the Indian Institute of Metals .

Devi, S and Bose, S K (1977) Quantitative estimation of elements and compounds by x-ray integrated intensity measurements. NML Technical Journal, 19 (2). pp. 39-43.

Dey, A K and Poddar, Palash and Singh, K K and Sahoo, K L (2006) Mechanical and wear properties of rheocast and conventional gravity die cast A356 alloy. Materials Science and Engineering A, 435-436 . pp. 521-529.

Dey, A K and Singh, D D N (1993) Role of alcohols on dissolution of 70/30 brass in HNO3-H2SO4 bath. NML Technical Journal, 35 (3-4). pp. 39-43.

Dey, A K and Singh, Inder and Altekar, V A (1981) Embrittlement of high carbon steel in sulphuric acid containing thio-compounds. NML Technical Journal, 23 (3-4). pp. 27-31.

Dey, A K and Sinha, A K Mahapatra and Khan, D K and Mukherjee, A N and Mukherjee, K P and Banerjee, T and Narain, Raj (1966) Interim report on atmospheric corrosion studies under marine atmosphere. NML Technical Journal, 8 (4). pp. 11-16.

Dey, K C and Sharma, V (2008) Copper (II) substituted heteropoly molybdate and tungstate of the keggin type anion [Xn+M12O40]-(8-n) : Their synthesis and characterization. Journal of Metallurgy and Materials Science, 50 (1). pp. 53-56.

Dey, K C and Sharma, V and Goswami, B (2012) Polyoxometalates : From green compounds to smart materials. Journal of Metallurgy and Materials Science, 54(2) . pp. 119-124.

Dey, M L and Singh, Gurdial (1971) Preparation of aluminium fluoride. NML Technical Journal, 13 (2). pp. 58-64.

Dey, R and Das, A and Tarafder, S and Sivaprasad, S (2019) State of Grain Boundary Misorientation Due to Multiaxiality in Austenitic Stainless Steel. Metallurgical and Materials Transactions A , 50(5) (IF-1.985). pp. 47-51.

Dey, R and Tarafder, S and Sivaprasad, S (2016) Influence of phase transformation due to temperature on cyclic plastic deformation in 304LN stainless steel. International Journal Of Fatigue, 90 (IF-2.899). pp. 148-157.

Dey, R and Tarafder, S and Sivaprasad, S (2019) Influence of proportional and non-proportional loading on deformation behaviour of austenitic stainless steel-macro and micro analysis. Theoretical and Applied Fracture Mechanics, 100 . pp. 342-353.

Dey, R and Tarafder, Soumitra and Sivaprasad, S (2018) Influence of axial and torsional cyclic loading on the fatigue behavior of 304LN stainless steel using solid and hollow specimens. Mechanics of Materials, 122 (IF-2.651). pp. 58-68.

Dey, Ramendra Sundar and Hajra, Saumen and Sahu, Ranjan K and Raj, C Retna and Panigrahi, M K (2012) A rapid room temperature chemical route for the synthesis of graphene: metal-mediated reduction of graphene oxide. Chemical Communications, 48 (12). pp. 1787-1789.

Dey, Rima and Tarafder, Soumitra and Bar, H and Sivaprasad, S (2020) Correlating Effect of Temperature on Cyclic Plastic Deformation Behavior with Substructural Developments for Austenitic Stainless Steel. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 480-496.

Dey, S and Roy, R K and Mallick, A B and Mitra, A and Panda, A K (2019) High-temperature magnetocaloric effect in devitrified Fe/Co based glassy monolayer and bilayer ribbons. Journal of Materials Science, 54(16) . pp. 11292-11303.

Dey, Shobhana (2012) Enhancement in hydrophobicity of low rank coal by surfactants - A critical overview. Fuel Processing Technology, 94 (1). pp. 151-158.

Dey, Shobhana (2005) Flotation responses of Gondwana coal in release analysis. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 114 (4). pp. 248-254.

Dey, Shobhana and B, Gangadhar and Gopalkrishna, S.J. (2015) Amenability to dry processing of high ash thermal coal using a pneumatic table. International Journal of Mining Science and Technology, 25 (IF-1.551). pp. 955-961.

Dey, Shobhana and Bhagat, R P and Kunwar, R K and Rao, D S and Banerje, B and Maulik, S C (2001) Comparative Studies on Beneficiation of Bauxite Samples for Application in Refractory Industry. Metals Materials and Processes, 13(1) . pp. 1-8.

Dey, Shobhana and Bhattacharjee, S (2003) Collectorless flotation of a coking coal. Transactions Of The Indian Institute Of Metals , 56 (5). pp. 477-482.

Dey, Shobhana and Bhattacharjee, S and Bhattacharyya, K K (1997) Collectorless flotation of coal with two-stage addition of pine oil. Minerals & metallurgical processing, 14 (4). pp. 13-16.

Dey, Shobhana and Bhattacharya, S (1998) Comparative Performance Analysis of Frothers — A Review of Available Methodologies. Mineral Processing and Extractive Metallurgy Review: An International Journal, 18 (2). pp. 201-213.

Dey, Shobhana and Bhattacharya, S (2007) Effect of frother type in collectorless flotation of two high-rank coking coals of Gondwana origin. Coal Preparation, 27 (1-3). pp. 4-27.

Dey, Shobhana and Bhattacharyya, K K (2007) Split and collectorless flotation to medium coking coal fines for multi-product zero waste concept. Fuel Processing Technology, 88 (6). pp. 585-590.

Dey, Shobhana and Chaurasia, Binish and Sahu, Laxikanta (2020) Dry processing of high ash Indian coal by air fluidized vibrating deck. International Journal of Coal Preparation and Utilization, online (IF-2.034). pp. 1-8.

Dey, Shobhana and Mohanta, M K and Goswami, M C and Pani, Santosh (2014) Recovery of Iron Values from Waste Manganiferous Iron Ore Fines for Pellet Making. Journal of Minerals and Materials Characterization and Engineering, 2 . pp. 513-521.

Dey, Shobhana and Mohanta, M K and Singh, Ratnakar (2017) Mineralogy and textural impact on beneficiation of goethitic ore. International Journal of Mining Science and Technology, 27(3) (IF-1.383). pp. 445-450.

Dey, Shobhana and Pani, S (2012) Effective Processing of Low-Volatile Medium Coking Coal Fines of Indian Origin using Different Proces Variables of Flotation. International Journal of Coal Preparation and Utilization, 32(6) . pp. 253-263.

Dey, Shobhana and Pani, S and Das, Avimanyu (2012) Scanvenging of High-Value Product from High-Ash Medium Coking Coal: A Compulsion for Less Endowed Regions. International Journal of Coal Preparation and Utilization, 32(5) (0.289). pp. 238-251.

Dey, Shobhana and Pani, Santosh and Mohanta, M K and Singh, Ratnakar (2012) Utilization of Iron Ore Slimes: A Future Prospective. Separation Science and Technology, 47 (5). pp. 769-776.

Dey, Shobhana and Pani, Santosh and Singh, Ratnakar (2014) Study of interactions of frother blends and its effect on coal flotation. Powder Technology, 260 (IF-2.269). pp. 78-83.

Dey, Shobhana and Pani, Santosh and Singh, Ratnakar and Paul, Gyan Manjari (2015) Response of process parameters for processing of iron ore slime using column flotation. International Journal of Mineral Processing, 140 (IF-1.310). pp. 58-65.

Dey, Shobhana and Parolis, L A S and Yorath, G (2012) Quantification of Sulphydryl Collector-Mixture Used in Sulphide Ore Flotation. Transaction of the Indian Institute of Metals, 65 (4). pp. 387-392.

Dey, Shobhana and Pathak, P N (2005) Comparative studies of amenability to processing of Graphite from different sources. Transactions of the Indian Institute of Metals, 58 (5). pp. 905-910.

Dey, Shobhana and Paul, Gyan Manjari and Pani, Santosh (2013) Flotation behaviour of weathered coal in mechanical and column flotation cell. Powder Technology, 246 (IF-2.265). pp. 689-694.

Dey, Shobhana and Sahu, L and Chaurasia, Binish and Nayak, B (2020) Prospects of utilization of waste dumped low-grade limestone for iron making: A case study. International Journal of Mining Science and Technology, 30(3) (IF-3.903). pp. 367-372.

Dey, Sujit Kumar and Dey, Shobhana and Das, Avimanyu (2013) Comminution features in an impact hammer mill. Powder Technology, 235 (IF-2.265). pp. 914-920.

Dey, Sujit Kumar and Vidyadhar, A and Das, Avimanyu (2012) Processing of electronic waste in a counter current teeter-bed separator. Journal of Environmental Management, 107 (IF-3.188). pp. 45-51.

Dey, Sushmita and Roy, R K and Mallick, A B and Mitra, A and Panda, A K (2018) Influence of rapid solidification on mangnetostructural and magnetocaloric effect in Ni53Mn24Ga23 alloy. Materials Today Communications, 17 (IF-1.859). pp. 140-143.

Dey, Sushmita and Roy, Rajat K and Ghosh, M and Mallick, A Basu and Mitra, A and Panda, A K (2017) Enhancement in magnetocaloric properties of NiMnGa alloy through stoichiometric tuned phase transformation and magneto-thermal transitions. Journal of Magnetism and Magnetic Materials, 439 (IF-2.630). pp. 305-311.

Dey, Sushmita and Singh, Satnam and Roy, Rajat K and Ghosh, M and Mitra, A and Panda, A K (2016) Influence of Mn incorporation for Ni on the magnetocaloric properties of rapidly solidified off-stoichiometric NiMnGa ribbons. Journal of Magnetism and Magnetic Materials, 397 (IF-2.630). pp. 342-346.

Dey, Swapna and Chattoraj, I (2016) Interaction of strain rate and hydrogen input on the embrittlement of 7075 T6 Aluminum alloy. Materials Science and Engineering: A, 661 (IF-3.094). pp. 168-178.

Dey, Swapna and Das, S K and Basumallick, A and Chattoraj, I (2010) The Effect of pitting on fatigue lives of peak-aged and overaged 7075 aluminum alloys. Metallurgical and Materials Transactions A , 41A . pp. 3297-3307.

Dey, Swapna and Gunjan, M K and Chattoraj, I (2008) Effect of temper on the distribution of pits in AA7075 alloys. Corrosion Science, 50 (10). pp. 2895-2901.

Dey, Swapna and Mandhyan, A K and Sondhi, S K and Chattoraj, I (2006) Hydrogen entry into pipeline steel under freely corroding conditions in two corroding media. Corrosion Science, 48 (9). pp. 2676-2688.

Dey, Swapna and Sivaprasad, S and Das, N and Chattoraj, I (2022) Influence of Hydrogen on Fatigue Crack Growth in 7075 Aluminum Alloy. Journal of Materials Engineering and Performance .

Dhal, B and Abhilash, and Pandey, B D (2014) Microbial sorption studies for removal of trivalent chromium from model tanning bath. Advanced Materials Research, 828 . pp. 33-44.

Dhal, B and Abhilash, and Pandey, B D (2013) Process optimization for bio-beneficiation of a chromite concentrate by a Cr(VI) reducing native microbe (Bacillus sp.). International Journal of Mineral Processing, 123 (IF-1.378). pp. 129-136.

Dhal, B and Das, N N and Pandey, B D and Thatoi, Hruayanath (2011) Environmental Quality of the Boula-Nuasahi Chromite Mine Area in India. Mine Water and the Environment, 30 (3). pp. 191-196.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2012) Bacterial Reduction of Hexavalent Chromium from Contaminated Overburden Soil. International Journal of Metallurgical Engineering, 1(5) . pp. 83-87.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2013) Characterizing toxic Cr(VI) contamination in chromite mine overburden dump and its bacterial remediation. Journal of Hazardous Materials, 260 (IF-4.173). pp. 141-149.

Dhal, B and Pandey, B D and Abhilash, (2018) Mechanism elucidation and adsorbent characterization for removal of Cr(VI) by native fungal adsorbent. Sustainable Environment Research . (In Press)

Dhal, B and Thatoi, Hruayanath and Das, N N and Pandey, B D (2013) Chemical and microbial remediation of hexavalent chromium from contaminated soil and mining/metallurgical solid waste: A review. Journal of Hazardous Materials, 250-251 (IF-4.173). pp. 272-291.

Dhal, B and Thatoi, Hruayanath and Das, N N and Pandey, B D (2010) Reduction of hexavalent chromium by Bacillus sp. isolated from chromite mine soils and characterization of reduced product. Journal of Chemical Technology & Biotechnology, 85 (11). pp. 1471-1479.

Dhananjayan, N (1970) Mechanism of Electrodeposition of Manganese in Alpha and Gamma Modifications. Electrochemical Science, 117 (8). pp. 1006-1011.

Dhanjal, S S and Rao, C A Naresh and Rao, G N and Altekar, V A (1977) Heat resistant cast iron. NML Technical Journal, 19 (2). pp. 29-32.

Dhaon, D K (1973) Inaugural Address on the National Seminar on Bacterial Leachning. NML Technical Journal, 15 (4). pp. 5-6.

Dhar, P and Bhattacharjee, S and Nayar, S and Das, S K (2015) Anomalously Augmented Charge Transport Capabilities of Biomimetically Transformed Collagen Intercalated Nanographene-Based Biocolloids. LANGMUIR, 31(12) (IF-4.384). pp. 3696-3706.

Dhiman, S and Joshi, R S and Singh, S and Gill, S S and Singh, H and Kumar, R and Kumar, Vinod (2022) Recycling of Ti6Al4V machining swarf into additive manufacturing feedstock powder to realise sustainable recycling goals. Journal of Cleaner Production, 348 .

Dhivya, E and Magadevan, D and Palguna, Y and Mishra, T and Aman, Noor (2019) Synthesis of titanium based hetero MOF photocatalyst for reduction of Cr (VI) from wastewater. Journal of Environmental Chemical Engineering, 7(4) . p. 103240.

Digges, Thomas G (1961) Research on Light Metals in the Metallurgy Division, National Bureau of Standards. NML Technical Journal, 3 (1). pp. 22-28.

Dinkar, Om Shankar and Panda, Rekha and Choubey, Pankaj K and Hait , Jhumki and Jha , Manis Kumar and Ambade, Balram (2022) Pyrolysis Pre-treatment of PCBs: A Sustainable Solution to Convert Encapsulation into Marketable Product and Separation of Metallic Concentrate. Journal of Metallurgy and Materials Science .

Dinkar, Om Shankar and Parween, Rukshana and Panda, Rekha and Choubey, Pankaj K and Ambade , Balram and Jha, Manis K (2022) Potential hydrometallurgical processes to recycle metals from discarded personal computer. Geosystem Engineering .

Dinkar, Om Shankar and Parween, Rukshana and Singh, Nityanand and Panda, Rekha and Choubey, Pankaj K and Ambade, Balram and Jha, Manis K (2022) Recovery of Nickel from Waste Printed Circuit Boards of Personal Computers. Journal of Metallurgy and Materials Science .

Dipali, Ranjit and Prasad, R K and Sahu, S K and Randhawa, N S (2023) Design and Optimization Study of Metal Recovery from Scrap NdFeB Magnets Using Response Surface Methodology. Industrial & Engineering Chemistry Research, 62(30) . pp. 11948-11956.

Director, NML (1961) Abstracts of Papers. NML Technical Journal, 3 (1). pp. 11-21.

Director, NML (1960) Abstracts of Papers. NML Technical Journal, 2 (1). pp. 2-10.

Director, NML (1962) Abstracts of Papers. NML Technical Journal, 4 (1). pp. 11-19.

Director, NML (1966) Abstracts of Papers - Symposium on metallurgy of substitute ferrous and non-ferrous alloys. NML Technical Journal, 8 (1). pp. 12-23.

Director, NML (1964) Abstracts of papers -- Symposium on Micro-Metallurgy - The Role of Minute Additions to Ferrous and Non-ferrous Metals and Alloys. NML Technical Journal, 7 (1). pp. 14-26.

Director, NML (1964) Abstracts of papers- Symposium on Utilization of Metallurgical Wastes. NML Technical Journal, 6 (1). pp. 18-29.

Director, NML (1963) Abstracts of papers-Symposium on iron and steelmaking. NML Technical Journal, 5 (1). pp. 14-23.

Director, NML (1975) Abstracts of Papers-Symposium on Problems in Transfer of Technology from R&D Laboratory to Industries. NML Technical Journal, 17 (3-4). pp. 6-8.

Director, NML (1968) Awards, Honours and Nominations. NML Technical Journal, 10 (3). pp. 33-37.

Director, NML (1960) Basic Characteristics. Foundry Moulding sands of India . pp. 12-15.

Director, NML (1960) Bonding Clays. Foundry Moulding Sands . pp. 144-170.

Director, NML (1971) Central creep testing facility at the National Metallurgical Laboratory. NML Technical Journal, 13 (2). pp. 37-41.

Director, NML (1968) Commercial Processes and Techniques developed at the National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 39-41.

Director, NML (1969) Creep Testing. NML Technical Journal, 11 (3). 3- .

Director, NML (1960) Crude Silica Sands. Foundry Moulding Sands of India, ( ). pp. 71-94.

Director, NML (1959) Demonstration of Patented Process at the National Metallurgical Laboratory. NML Technical Journal, 1 (3). pp. 7-8.

Director, NML (1962) Developments in Iron and Steel making. NML Technical Journal, 4 (3). 3- .

Director, NML (2015) Fatigue and Fracture - A compilation of 100 research publications. Compilation of 100 research publications . pp. 1-948.

Director, NML (1962) Ferro Alloy Symposium. NML Technical Journal, 4 (1). 3- .

Director, NML (1967) Ferro Alloys. NML Technical Journal, 9 (4). 3- .

Director, NML (1961) Ferro-Alloy Industry in India. NML Technical Journal, 3 (3). 3- .

Director, NML (1962) Ferro-Alloy Industry in India. NML Technical Journal, 4 (2). 3- .

Director, NML (1961) Ferro-Alloy Industry in India-A Symposium. NML Technical Journal, 3 (3). 2- .

Director, NML (1966) Fighting Against Corrosion. NML Technical Journal, 8 (4). 3- .

Director, NML (1966) Fighting Against Corrosion. NML Technical Journal, 8 (4). 3- .

Director, NML (1967) Fluorspar. NML Technical Journal, 9 (3). 3- .

Director, NML (1966) Foreign Collaboration. NML Technical Jounal, 8 (3). 3- .

Director, NML (1969) Foreword. NML Technical Journal, 11 (4). 3- .

Director, NML (1960) High Silica Sands. Foundry Moulding Sands of India . pp. 96-137.

Director, NML (1959) India 1958 Exhibition. NML Technical Journal, 1 (2). 44- .

Director, NML (1968) Indian Foundry Bentonite Clays. NML Technical Journal, 10 (2). p. 3.

Director, NML (1965) Indian Metallurgists and the Present Emergency. NML Technical Journal, 7 (4). 3- .

Director, NML (1963) International Symposium on Iron and Steelmaking. NML Technical Journal, 5 (2). 3- .

Director, NML (1960) Introduction. Foundry Moulding Sands of India, ( ). pp. 1-2.

Director, NML (1960) Light Metal Industry in India. NML Technical Journal, 2 (3). 5- .

Director, NML (1960) Light Metal Industry in India. NML Technical Journal, 2 (2). 6- .

Director, NML (1961) Light Metal Industry in India. NML Technical Journal, 3 (2). 3- .

Director, NML (1961) Light Metal Symposium. NML Technical Journal, 3 (1). 3- .

Director, NML (1964) List of Delegates. NML Techincal Journal, 6 (1). pp. 60-66.

Director, NML (1962) List of Delegates Attending the Symposium on "Ferro Alloy Industry in India" from overseas and outside Jamshedpur. NML Technical Journal, 4 (1). pp. 51-55.

Director, NML (1961) List of Delegates Attending the Symposium on "Light Metal Industry in India" from overseas and Outside Jamshedpur. NML Technical Journal, 3 (1). pp. 73-76.

Director, NML (1966) List of Delegates attending the Symposium on Metallurgy of Substitute Ferrous and Non-ferrous Alloys. NML Technical Journal, 8 (1). pp. 81-84.

Director, NML (1965) List of Delegates Attending the symposium on Micro-metallurgy. NML Technical Journal, 7 (1). pp. 71-74.

Director, NML (1960) List of Delegates Attending the Symposium on Pilot Plants in Metallurgical Research and Development from Overseas and Outside Jamshedpur. NML Technical Journal, 2 (1). pp. 60-64.

Director, NML (1959) List of delegates to the symposium on Iron and Steel Industry in India from Overseas and Outside Jamshedpur. NML Technical Journal, 1 (1). pp. 121-127.

Director, NML (1967) Manufacture of Special Ferro-Alloys-Process developed at the National Metallurgical Laboratory. NML Technical Journal, 9 (3). 30- .

Director, NML (1964) Metallurgical Wastes. NML Technical Journal, 6 (2). 5- .

Director, NML (1960) Methods of Testing. Foundry Moulding Sands of India, ( ). pp. 16-23.

Director, NML (1964) Micro-Metallurgy. NML Technical Journal, 6 (3). 5- .

Director, NML (1965) Micro-Metallurgy. NML Technical Journal, 7 (2). 3- .

Director, NML (1959) N.M.L. - a year in retrospect. NML Technical Journal, 1 (2). pp. 4-5.

Director, NML (1965) Naptha injection trials at National Metallurgical Laboratory, Jamshedpur. NML Technical Journal, 7 (1). pp. 65-70.

Director, NML (1967) National Metallurgical Laboratory Foundry Stations. NML Technical Journal, 9 (4). 32- .

Director, NML (1960) Natural Moulding Sands. Foundry Moulding Sands of India . pp. 24-70.

Director, NML (1966) NML Processes and Patents. NML Technical Journal, 8 (4). pp. 38-39.

Director, NML (1962) Non-Ferrous Metal Industry in India. NML Technical Journal, 4 (4). 3- .

Director, NML (1963) Non-ferrous Metals and Substitute Alloys. NML Technical Journal, 5 (4). 3- .

Director, NML (1967) Non-ferrous metals technology. NML Technical Journal, 9 (2). 3- .

Director, NML (1959) Notes and news. NML Technical Journal, 1 (2). pp. 41-43.

Director, NML (1959) Notes and News. NML Technical Journal, 1 (3). pp. 37-42.

Director, NML (1959) Notes and news. NML Technical Journal, 1 (4). pp. 41-49.

Director, NML (1960) Notes and News. NML Technical Journal, 2 (2). pp. 32-42.

Director, NML (1960) Notes and News. NML Technical Journal, 2 (2). pp. 26-33.

Director, NML (1960) Notes and News. NML Technical Journal, 2 (4). pp. 27-32.

Director, NML (1961) Notes and News. NML Technical Journal, 3 (2). pp. 36-44.

Director, NML (1961) Notes and News. NML Technical Journal, 3 (3). pp. 32-37.

Director, NML (1961) Notes and News. NML Technical Journal, 3 (4). pp. 25-27.

Director, NML (1962) Notes and News. NML Technical Journal, 4 (2). pp. 39-42.

Director, NML (1962) Notes and News. NML Technical Journal, 4 (3). pp. 33-37.

Director, NML (1962) Notes and News. NML Technical Journal, 4 (4). pp. 31-34.

Director, NML (1963) Notes and News. NML Technical Journal, 5 (2). pp. 38-40.

Director, NML (1963) Notes and news. NML Technical Journal, 5 (3). pp. 32-35.

Director, NML (1963) Notes and News. NML Technical Journal, 5 (4). pp. 33-35.

Director, NML (1964) Notes and news. NML Technical Journal, 6 (2). pp. 39-41.

Director, NML (1964) Notes and news. NML Technical Journal, 6 (4). pp. 31-33.

Director, NML (1965) Notes and news. NML Technical Journal, 7 (2). pp. 25-27.

Director, NML (1965) Notes and News. NML Technical Journal, 7 (3). pp. 28-31.

Director, NML (1965) Notes and News. NML Technical Journal, 7 (4). pp. 20-22.

Director, NML (1967) Notes and News. NML Technical Journal, 9 (1). pp. 35-36.

Director, NML (1967) Notes and News. NML Technical Journal, 9 (2). pp. 35-37.

Director, NML (1960) Occurance. Foundry Moulding Sands of India . pp. 3-11.

Director, NML (1959) Ourselves. NML Technical Journal, 1 (1). 3- .

Director, NML (1968) Patents of National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 47-51.

Director, NML (1960) Pilot Plant Symposium. NML Technical Journal, 2 (1). iii- .

Director, NML (1968) Pilot Plants at National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 53-62.

Director, NML (1960) Pilot Plants in Metallurgical Research and Development. NML Technical Journal, 2 (2). 3- .

Director, NML (1960) pogramme-Symposium on "Pilot Plants in Metallurgical Research and Development". NML Technical Journal, 2 (1). iv-x.

Director, NML (1967) Process Developed at the National Metallurgical Laboratory - Production of Graphite Crucibles(Carbon and Clay bonded) Indian Patent Nos.58869 & 62352. NML Technical Journal, 9 (4). 31- .

Director, NML (1967) Process Developed at the National Metallurgical Laboratory : Modification of Aluminium Silicon Alloys-Indian Patent No.76415. NML Technical Journal, 9 (2). 34- .

Director, NML (1968) Processes developed at the National Metallurgical Laboratory for Commercial Exploitation. NML Technical Journal, 10 (2). pp. 4-6.

Director, NML (1969) Profile of Prof. V.A. Altekar-Our New Director. NML Technical Journal, 11 (3). 4- .

Director, NML (1961) Programme-Symposium on "Light Metal Industry in India". NML Technical Journal, 3 (1). pp. 4-10.

Director, NML (1965) Programme-Symposium on Micro-Metallurgy-The Role of Minute Additions to Ferrous and Non-Ferrous Metals and Alloys. NML Technical Journal, 7 (1). pp. 6-13.

Director, NML (1963) Programme-Symposium on Recent Developments in Iron and Steelmaking with Special Reference to Indian Conditions. NML Technical Journal, 5 (1). pp. 4-12.

Director, NML (1964) Programme-Symposium on Utilization of Metallurgical Wastes. NML Technical Journal, 6 (1). pp. 8-17.

Director, NML (1968) Publications of National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 81-82.

Director, NML (1959) Recent Developments. NML Technical Journal, 1 (2). pp. 45-47.

Director, NML (1959) Recent Developments. NML Technical Journal, 1 (3). pp. 46-54.

Director, NML (1959) Recent Developments. NML Technical Journal, 1 (4). pp. 51-62.

Director, NML (1960) Recent Developments. NML Technical Journal, 2 (2). pp. 43-52.

Director, NML (1960) Recent Developments. NML Technical Journal, 4 (2). pp. 33-37.

Director, NML (1961) Recent Developments. NML Technical Journal, 3 (2). pp. 45-54.

Director, NML (1961) Recent Developments. NML Technical Journal, 3 (3). pp. 38-41.

Director, NML (1961) Recent Developments. NML Technical Journal, 3 (4). pp. 28-31.

Director, NML (1962) Recent Developments. NML Technical Journal, 4 (2). pp. 43-44.

Director, NML (1962) Recent Developments. NML Technical Journal, 4 (3). pp. 38-40.

Director, NML (1962) Recent Developments. NML Technical Journal, 4 (4). pp. 35-40.

Director, NML (1963) Recent Developments. NML Technical Journal, 5 (2). pp. 41-43.

Director, NML (1963) Recent Developments. NML Technical Journal, 5 (3). pp. 36-39.

Director, NML (1963) Recent Developments. NML Technical Journal, 5 (4). pp. 36-39.

Director, NML (1964) Recent Developments. NML Technical Journal, 6 (2). pp. 42-45.

Director, NML (1964) Recent Developments. NML Technical Journal, 6 (3). pp. 25-26.

Director, NML (1964) Recent Developments. NML Technical Journal, 6 (4). pp. 34-35.

Director, NML (1965) Recent Developments. NML Technical Journal, 7 (3). pp. 32-33.

Director, NML (1967) Research for Industry. NML Technical Journal, 9 (1). 3- .

Director, NML (1964) Research in Standardization. NML Technical Journal, 6 (4). 3- .

Director, NML (1961) Science's Return from Technology. NML Technical Journal, 3 (4). 3- .

Director, NML (1959) Scope of Pilot Plants. NML Technical Journal, 1 (3). 3- .

Director, NML (1970) The SCRATA Process for the Fumeless Decarburization of Steel by Oxide Injection. NML Technical Journal, 12 (4). 114- .

Director, NML (1968) The Set up of the National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 21-32.

Director, NML (1964) Shri Jawaharlal Nehru - Builder of Modern India. NML Technical Journal, 6 (4). pp. 28-29.

Director, NML (1968) Silver Jubilee of Council of Scientific and Industrial Research. NML Technical Journal, 10 (3). 3- .

Director, NML (1968) Some Important Projects of National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 79-80.

Director, NML (1968) Some Major Technical Consultancy Provided in Recent Years. NML Technical Journal, 10 (3). pp. 43-46.

Director, NML (1968) Special Equipment Available at National Metallurgical Laboratory for Research and Service Facilities. NML Technical Journal, 10 (3). pp. 63-78.

Director, NML (1960) Special Sands. Foundry Moulding Sands of India . pp. 138-143.

Director, NML (1959) Statistics. NML Technical Journal, 1 (2). 48- .

Director, NML (1959) Statistics. NML Technical Journal, 1 (3). pp. 55-59.

Director, NML (1959) Statistics. NML Technical Jounal, 1 (4). pp. 63-67.

Director, NML (1960) Statistics. NML Technical Journal, 2 (3). pp. 42-45.

Director, NML (1960) Statistics. NML Technical Journal, 2 (4). pp. 38-40.

Director, NML (1961) Statistics. NML Technical Journal, 3 (2). pp. 55-56.

Director, NML (1961) Statistics. NML Technical Journal, 3 (3). 42- .

Director, NML (1961) Statistics. NML Technical Journal, 4 (3). pp. 32-33.

Director, NML (1962) Statistics. NML Technical Journal, 4 (2). pp. 45-46.

Director, NML (1962) Statistics. NML Technical Journal, 4 (3). pp. 41-43.

Director, NML (1963) Statistics. NML Technical Journal, 5 (3). 40- .

Director, NML (1963) Statistics. NML Technical Journal, 5 (4). 40- .

Director, NML (1964) Statistics. NML Technical Journal, 6 (3). 27- .

Director, NML (1964) Statistics. NML Technical Journal, 6 (4). 36- .

Director, NML (1965) Statistics. NML Technical Journal, 7 (2). 28- .

Director, NML (1965) Statistics. NML Technical Journal, 7 (4). 23- .

Director, NML (1967) Statistics. NML Technical Journal, 9 (1). 37- .

Director, NML (1967) Statistics. NML Technical Journal, 9 (2). 38- .

Director, NML (1970) Studies on the Precipitation of AIN in Mild Steel. NML Technical Journal, 12 (1). pp. 29-31.

Director, NML (1965) Substitute Alloys. NML Technical Journal, 7 (2). 3- .

Director, NML (1966) Substitute Alloys. NML Technical Journal, 8 (2). 3- .

Director, NML (1960) Summary and Recommendations. Foundry Moulding Sands . pp. 171-180.

Director, NML (1963) Symposium on Iron and Steelmaking. NML Technical Journal, 5 (1). 3- .

Director, NML (1961) Symposium on Light Metal Industry in India. NML Technical Journal, 3 (2). pp. 4-6.

Director, NML (1964) Symposium on Metallurgical Wastes. NML Technical Journal, 6 (1). 7- .

Director, NML (1966) Symposium on metallurgy of substitute ferrous and non-ferrous alloys. NML Technical Journal, 8 (1). pp. 4-11.

Director, NML (1965) Symposium on Micro-Metallurgy. NML Technical Journal, 7 (1). 5- .

Director, NML (1960) Symposium on Pilot Plants in Metallurgical Research and Development-A Review. NML Technical Journal, 2 (2). pp. 4-7.

Director, NML (1959) Technical aid to Industry. NML Technical Journal, 1 (2). pp. 6-7.

Director, NML (1960) Third five year plan. NML Technical Journal, 2 (4). 5- .

Director, NML (1959) Training in Research. NML Technical Journal, 1 (4). 3- .

Director, NML (1975) Twentyfive Years of National Metallurgical Laboratory. NML Technical Journal, 17 (3-4). pp. 3-5.

Director, NML (1963) Utilisation of Metallurgical Wastes. NML Technical Journal, 5 (3). 3- .

Director, NML (1963) Utilisation of Metallurgical Wastes-A Symposium. NML Technical Journal, 5 (3). 4- .

Director, NML (1968) Utilization of Indigenous Technology. NML Technical Journal, 10 (1). 3- .

Director, NML (1969) Utilization of Low-grade Copper Ores. NML Technical Journal, 11 (2). 3- .

Director, NML (1966) Welcome to the Delegates. NML Technical Journal, 8 (1). 3- .

Director , NML (2022) PAB CSIR_NML 2022. PAB NML .

Director , NML (1959) Pilot Plants in Metallurgical Research and Development. NML Technical Journal, 1 (3). 5- .

Director , NML (1960) Recent Developments. NML Technical Journal, 2 (3). pp. 34-41.

Director , NML (1959) Symposium on "Iron and Steel Industry in India"-a review. NML Technical Journal, 1 (2). pp. 8-10.

Divya, M and Albert, S K and Rajnikanth, V (2019) Liquation cracking susceptibility of partially melted zone in 304B4 SS multipass weldments. Welding in the World , 63(4) . pp. 1101-1113.

Divya, M and Das, C R and Albert, S K and Goyal, Sunil and Ganesh, P and Kaul, R and Swaminathan, J and Murty, B S and Kukreja, L M and Bhaduri, A K (2014) Influence of welding process on Type IV cracking behavior of P91 steel. Materials Science and Engineering A, 613 (IF-2.409). pp. 148-158.

Divya, M and Das, C R and Ghosh Chowdhury, S and Albert, S K and Bhaduri, A K (2016) Effect of Grain Boundary Character Distribution on the Impact Toughness of 410NiMo Weld Metal. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 47A(7) (IF-1.874). pp. 3397-3411.

Divya, Nangunoori and Devender, V (2017) Mechanical behaviour of banana flax fiber reinforced soy resin composites. Journal of Metallurgy and Materials Science, 59(3) . pp. 111-116.

Dixit, P and Makhija, D and Mukherjee, A K and Singh, V and Bhatanagar, A and Rath, R K (2019) Characterization and Beneficiation of Dry Iron Ore Processing Plant Reject Fines to Produce Sinter/Pellet Grade Iron Ore Concentrate. Mining Metallurgy & Exploration, 36(2) . pp. 451-462.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, S (2016) Mechanical properties and durability of volcanic ash based geopolymer mortars. Construction and Building Materials, 124 (IF-3.169). pp. 606-614.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, S (2017) Volcanic ash-based geopolymer cements/concretes: the current state of the art and perspectives. Environmental Science and Pollution Research, 24(5) (IF-2.741). pp. 4433-4446.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, Sanjay (2016) Mechanical activation of volcanic ash for geopolymer synthesis: effect on reaction kinetics, gel characteristics, physical and mechanical properties. RSC Advances, 6(45) (IF 3.169). pp. 39106-39117.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, Sanjay (2016) Reactivity of volcanic ash in alkaline medium, microstructural and strength characteristics of resulting geopolymers under different synthesis conditions. Journal Of Materials Science, 51(22) (IF-2.599). 10301-10317.

Dlouhy, Ivo and Tarafder, Mita and Hadraba, Hynek (2011) Micromechanical Aspects of Transgranular and Intergranular Failure Competition. Key Engineering Materials , 465 (1.00 (SCI)). pp. 399-402.

Dodbiba, G and Dai, D and Okaya, K and Matsuo, S and Fujita, T (2010) Treatment of arsenic-containing acid mine drainage by micro-bubble flotation. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), 2(Section 14) . pp. 1175-1180.

Dogan, Ali (1991) A Dynamical Model of Internal Friction in Formation of Martensite. NML Technical Journal, 33 (3-4). pp. 18-23.

Dogan , Ali (1992) Internal Friction and Its Relation with the Martensitic Transformation in In-TI Alloy. NML Technical Journal, 34 (1-2). pp. 3-7.

Dogan , Ali (1994) A Phase Stability Model for Martensite Transformation. NML Technical Journal, 36 (2). pp. 39-45.

Dogan , Ali and Aslantas, M and Havvatoglu, Y (2001) Investigation of magnetostriction strain for martensitic phase transformation FCC to FCT. Journal of Metallurgy and materials Science, 43 (1). pp. 1-7.

Dolzhenko, P and Odnobokova, M and Tikhonova, M and Kaibyshev, R and Chowdhury, S G and Belyakov, A (2023) Grain boundary assembly in a 316 L steel produced by selective laser melting and annealing. Materials Characterization, 206(Part: A) .

Dubey, K S and Ramachandrarao, P and Lee, S (1996) Thermodynamic and viscous behaviour of undercooled liquids. Thermochimica Acta, 280-281 . pp. 25-62.

Dubey, R K (1963) Observations on oxygen melting of stainless steel. NML Technical Journal, 5 (3). pp. 10-17.

Dubey, R K and Chakraborty, S P and Gupte, P K (1968) Effect of bainite on mechanical properties of nickel-chromium constructional alloy steels. NML Technical Journal, 10 (1). pp. 4-9.

Dubey, R K and Chakravarty, S P and Gupte, P K (1969) Tempering of Die-steels based on indigenous materials. NML Technical Journal, 11 (3). pp. 26-29.

Dubey, R K and Gupte, P K (1967) Effect of chromium addition on transformation characteristics of nickel and manganese alloy steel. NML Technical Journal, 9 (3). pp. 8-14.

Dubey, R K and Gupte, P K (1969) Observations on continuous cooling transformation characteristics of alloy steels. NML Technical Journal, 11 (3). pp. 5-12.

Dubey, R K and Nag, P S and Gupte, P K (1968) Some observations on bainitic hardening of 18-4-1 high speed steel. NML Technical Journal, 10 (2). pp. 19-23.

Dutt, A K and Bansal, G K and Tripathy, S and Krishna, K Gopala and Srivastava, V C and Chowdhury, S G (2022) Optimization of Selective Laser Melting (SLM) Additive Manufacturing Process Parameters of 316L Austenitic Stainless Steel. Transactions of the Indian Institute of Metals .

Dutt, Ashimesh and Sen, P C and Rao, H V Bhaskar (1963) Mercury hydrometer for volume determination. NML Technical Journal, 5 (4). pp. 22-23.

Dutta, A and Shivaji, T and Ghosh, M and Fernandes, R and De, P K and Nayak, D and Sharma, R (2021) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry & Physics . (In Press)

Dutta, A and Sivaji, T and Ghosh, M and Fernandes, R and De, PS and Nayak, D and Sharma, R (2022) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry and Physics, 276 .

Dutta, A K and Sivaprasad, S and Bar, H N and Prasad, P and Kumar, K (2016) Numerical modelling of dissipation energy of high tensile steel frames against cyclic earthquake excitations. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 133-146.

Dutta, B M and Bhaskar Rao, H V (1964) A comparative study of insulation refractories with special reference to thermal conductivity. NML Technical Journal, 6 (4). pp. 17-22.

Dutta, B M and Gupta, K N and Kapoor, A N (1967) Study of kinetics of hydrogen reduction of iron ores by electrical conductivity method. NML Technical Journal, 9 (1). pp. 23-28.

Dutta, B M and Ramakrishna Rao, M (1969) Development and Properties of High Purity calcium Aluminate Cements from Indigenous Raw Materials. NML Technical Journal, 11 (2). pp. 7-14.

Dutta, Chandan and Das, T K and Hawaldar, R and Kumar, J and Sagar, S P (2022) Delineation of Parametric Controls on LTCC-Based Eddy Current Sensor Exposed to High Temperature. IEEE Transactions on Instrumentation and Measurement, 71 .

Dutta, Chandan and Kumar, J and Das, T K and Sagar, S P (2021) Recent Advancements in the Development of Sensors for the Structural Health Monitoring (SHM) at High-Temperature Environment: A Review. IEEE Sensors Journal, 21(14) . pp. 15904-15916.

Dutta, Deblina and Goel, Sudha and Hait, Jhumki and Jha, Manis K (2016) E-waste generation, management, utilization and recycling : A review. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 89-98.

Dutta, Deblina and Kumari, Archana and Panda, Rekha and Jha, Soni and Gupta, Divika and Goel, Sudha and Jha, Manis K (2018) Close loop separation process for the recovery of Co, Cu, Mn, Fe and Li from spent lithium-ion batteries. Separation and Purification Technology, 200 (IF-3.359). pp. 327-334.

Dutta, Deblina and Panda, Rekha and Kumari, Archana and Goel, Sudha and Jha, Manis K (2018) Sustainable recycling process for metals recovery from used printed circuit boards (PCBs). Sustainable Materials and Technologies, 17 (IF-3.567).

Dutta, K and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Influence of asymmetric cyclic loading on substructure formation and ratcheting fatigue behaviour of AISI 304LN stainless steel. Materials Science and Engineering A, 527 (29-30). 7571-7579 .

Dutta, Madhulika and Khare, Puja and Chakravarty, S and Saikia, Durlov and Saikia, Binoy K (2018) Physico-chemical and elemental investigation of aqueous leaching of high sulfur coal and mine overburden from Ledo coalfield of Northeast India. International Journal of Coal Science & Technology . pp. 1-17.

Dutta, S and Das, Arpan and Barat, K and Roy, Himadri (2012) Automatic characterization of fracture surfaces of AISI 304LN stainless steel using image texture analysis. Measurement: Journal of the International Measurement Confederation, 45 (5). pp. 1140-1150.

Dutta, S and Rajnikanth, V and Panda, A K and Mitra, A and Chatterjee, S and Roy, R K (2019) Effect of Annealing Treatment on Mechanical and Magnetic Softening Behaviors of Cold Rolled Interstitial-Free Steel. Journal of Materials Engineering and Performance , 28(4) . pp. 2228-2236.

Dutta, Samik and Barat, K and Das, Arpan and Das, Swapan K and Shukla, A K and Roy, Himadri (2014) Characterization of micrographs and fractographs of Cu-strengthened HSLA steel using image texture analysis. Measurement, 47 (IF-1.526). pp. 130-144.

Dutta, Siuli and Panda, A K and Mitra, Amitava and Chatterjee, S and Roy, Rajat K (2020) Microstructural evolution, recovery and recrystallization kinetics of isothermally annealed ultra low carbon steel. Materials Research Express, 7(1) (IF-1.449). 016554.

Dutta, Siuli and Panda, Ashis K and Chatterjee, Subrata and Roy, Rajat K (2020) Effect of annealing treatment on magnetic texture of cold rolled ULC steel. Materials Letters, 276 (IF-3.204). p. 128211.

Duy, P To and Lee, Z H (2004) Incluence of rare earth metals on non-metallic inclusion in 25Cr-7Ni-3Mo-0.25N duplex stainless steel. Journal of Metallurgy and materials Science., 46 (3). pp. 135-146.

Duy, P To and Lee, Z H (2004) Modifying inclusion types and shapes by rare earth metals addition to low carbon steel. Journal of Metallurgy and materials Science., 46 (3). pp. 147-155.

Dwivedi, Awadesh and Kumari, Arya and Aarthy, Murali and Singh, S K and Ojha, Monalisha and Jha, Suman and Jha, S K and Jha, N S (2021) Spectroscopic and molecular docking studies for the binding and interaction aspects of curcumin-cysteine conjugate and rosmarinic acid with human telomeric G-quadruplex DNA. International Journal of Biological Macromolecules, 182 . pp. 1463-1472.

Dwivedi, Deepak and Randhawa, N S and Saroj, Sanjay and Jana, Ranjeet Kumar (2017) An Overview of Manganese Recovery by Hydro and Pyro-Metallurgical Routes. Journal of The Institution of Engineers (India): Series D, 98(1) . pp. 147-154.

Dwivedy, K K and Bhurat, M C and Jayaram, K M V (1972) Heap and bacterial leaching tests on sample of low grade Uranium ore from Keruadungri, Singhbhum District, Bihar. NML Technical Journal, 14 (2). pp. 72-75.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2012) Decrease of electrical conductivity activation energy of Co-coated AISI 430 alloy. Journal of Metallurgy and Materials Science, 54(2) . pp. 143-148.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Decreased chromia growth during isothermal and cyclic oxidation tests at 700ºC. Journal of Metallurgy and Materials Science, 53 (2). pp. 211-215.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2010) The effect of chromia scale thickness on ASR of solid oxide fuel cell interconnects at presence of Mn3O4 and MnFe2O4 spinels. Journal of Metallurgy and Materials Science, 52 (1). pp. 103-107.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2012) The effect of Cr2O3 scale on electrical conductivity of Cobalt-spinel-coated ferritic stainless steel. Journal of Metallurgy and Materials Science,, 54(3) . pp. 219-224.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Electrical conductivity of interconnects in presence of two manganese spinel coatings. Journal of Metallurgy and Materials Science, 53 (4). pp. 405-410.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2010) Evaluation of electrical conductivity activation energy of manganese coated Fe-17%Cr ferritic stainless steel. Journal of Metallurgy and Materials Science, 52 (3). pp. 273-278.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2012) Evaluation of electrical conductivity activation energy of manganese coated Fe-17%Cr ferritic stainless steel. Journal of Metallurgy and Materials Science, 54(1) . pp. 87-92.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Improved oxidation resistance of coated interconnects at 700ºC. Journal of Metallurgy and Materials Science, 53 (1). pp. 97-102.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) The influence of Mn spinel coatings on electrical conductivity of Fe-17%Cr alloy. Journal of Metallurgy and Materials Science, 53 (3). pp. 311-317.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) The influence of MnCo2O4, CoCr2O4, CoFe2O4 and Co3O4 spinels on the thickness of chromia scale during two types of oxidation tests. Journal of Metallurgy and Materials Science, 53 (2). pp. 205-209.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Investigation on parabolic rate constant in presence of MnCo2O4, CoCr2O4, CoFe2O4 and Co3O4 coatings at 700ºC. Journal of Metallurgy and Materials Science, 53 (3). pp. 305-309.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Manganese deposition of high temperature ferritic stainless steel interconnects. Journal of Metallurgy and Materials Science, 53 (4). pp. 419-425.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Reduced electrical resistance of interconnects presence of Mn3O4 and MnFe2O4. Journal of Metallurgy and Materials Science, 53 (1). pp. 103-108.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2010) Reduced parabolic rate constant at presence of Mn3O4 and MnFe2O4. Journal of Metallurgy and Materials Science, 52 (3). pp. 267-271.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Studies on electrical resistance activation energy in presence of cobalt spinels. Journal of Metallurgy and Materials Science, 53 (3). pp. 319-324.

Ebrahimifar, Hadi and Zandrahimia, Morteza (2010) Coating of AISI 430 ferritic stainless steel used in SOFCs in a Co-base pack mixture. Journal of Metallurgy and Materials Science, 52 (2). pp. 155-160.

El-Amoush, Amjad Saleh (2012) Effect of hydrogen charging conditions on the hardness of tin brass heat exchanger tube. Journal of Metallurgy and Materials Science, 54(1) . pp. 53-62.

Elango, A (2004) Corrosion behaviour of diffusion coatings deposited by slurry chromising, electro plating and aluminium spraying onto mild steel panel. Journal of Metallurgy and materials Science., 46 (2). pp. 123-133.

Elango, A and Periasamy, V M and Paramasiv, M (2004) Polarization of 57S aluminium used as galvanic anode in 2M NaOH. Journal of Metallurgy and materials Science., 46 (4). pp. 247-252.

Elango, Adirajan and Nandi, Debkumar and Vinayagam, Jayaraman and Arumugam, Meyyappan and Pal, Churala and Dey, Sumit and Giri, Venkatachalam Sesha and Mukherjee, Joydeep and Garai, Subhadra and Jaisankar, Parasuraman (2009) Antibacterial Activity and Anticorrosive Efficiency of Aqueous Methanolic Extract of Artemisia pallens (Asteraceae) and its major Constituent. Journal of Complementary and Integrative Medicine, 6 (1). pp. 1-11.

Elzohiery, Mohamed and Mohassab, Yousef and Pal, J and Zhang, Shengqin and Sohn, Hong Yong (2016) Reduction kinetics of magnetite concentrate particles with H2 + CO at 1200 to 1600 oC relevant to a novel Ironmaking process. 7th International Symposium on High-Temperature Metallurgical Processing . pp. 35-41.

Esfahani, Hamid Reza and Mirsalehi, Seyyed Ehsan (2014) Investigation on microstructure and mechanical properties of friction stir welded lap joints between commercially pure copper and St37-2 mild steel. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 231-238.

Eslamian, Atiye and Rezai, Bahram and Mohammad, Reza Aslani (2010) Study and prediction of a relationship between particles shape characteristics of minerals and their flotation kinetics. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 43-46.

Eticha, Z G and Alex, T C and Olu, F E and Yimam, A and Alemayehu, E (2023) Effects of doping iron on the colouring properties of copper chromate pigment. Bulletin of Materials Science, 46(2) .

Fashu, Simbarashe and Li, Jianguo and Dan, Hu Qiao (2011) Purification of an industrial aluminum alloy by melt stirring during Ohno continuous casting process. Journal of Metallurgy and Materials Science, 53 (1). pp. 55-65.

Firoz, R and Basantia, S K and Khutia, N and Bar, H N and Sivaprasad, S and Murthy, G V S (2020) Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650 degrees C. Journal of Alloys and Compounds, 845 (IF-4.650). p. 156276.

Gangopadhyay, A K and Sahoo, K L and Kelton, K F (2011) Importance of solute-solute interactions on glass formability. Philosophical Magazine, 91 (17). pp. 2186-2199.

Ganguly, Amit and Goswami, M (1984) Carbothermic Reduction of Sukinda Chromite Pellets followed by Leaching. Transactions of the Indian Institute of Metals, 37 (2). pp. 153-155.

Ganguly, Amit and Gupta, K N and Aswath, H S (1983) Gas based DRI for India. Iron and Steel International, 56 (4). pp. 143-149.

Garai, Subhadra and Jaisankar, Parasuraman and Singh, J K and Elango, Adirajan (2012) A comprehensive study on crude methanolic extract of Artemisia pallens (Asteraceae) and its active component as effective corrosion inhibitors of mild steel in acid solution. Corrosion Science, 60 . pp. 193-204.

Garai, Subhadra and Sinha, Arvind (2014) Biomimetic nanocomposites of carboxymethyl cellulose-hydroxyapatite: Novel three dimensional load bearing bone grafts. Colloids and Surfaces B Biointerfaces, 115 (IF-4.287). pp. 182-190.

Garai, Subhadra and Sinha, Arvind (2016) Three dimensional biphasic calcium phosphate nanocomposites for load bearing bioactive bone grafts. Materials Science and Engineering C, 59 (IF-4.164). pp. 375-383.

Garai, Subhadra and Upadhyay, A K and Sircar, J K (2006) Potassium ion-selective membrane electrode based on heterogeneous precipitate and PVC matrix. Journal of Metallurgy and Materials Science, 48 (2). pp. 103-108.

Garg, Niti and Scholl, Clark and Mohanty, Ashok and Jin, Rongchao (2010) The Role of bromide ions in seeding growth of Au nanorods. Langmuir, 26 (12). pp. 10271-10276.

Gaur, B and Singh, A K and Rao , N J (1994) Corrosion of mild-steel in hypochlorite solution - an electrochemical and weight-loss study. Indian Journal of Chemical Technology, 1 (4). pp. 225-229.

Gaur, B and Singh, Raghuvir and Singh, A K (2000) Corrosion of stainless steels in chlorination washer of Indian paper industry. Journal of Metallurgy and materials Science, 42 (2). pp. 113-119.

Gaur, B and Singh, T B and Singh, D D N (1996) Beneficial role of chloride ions during pickling of steel in sulfuric acid. Corrosion, 52 (2). pp. 154-159.

Gaurav, G and Murtaza, Q and Yuvraj, N and Mandal, D and Sahoo, K L and Murmu, L (2017) Synthesis and effect of Misch metal on mechanical properties of conventional cast Mg-Al-Zn-Sn-Pb alloy system. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231(7) (IF-1.625).

Gautam, P and De, A K and Rao, M D and Sinha, I and Behera, C K and Singh, K K (2023) Waste remediation: Low-temperature synthesis of hybrid Cu(OH)2/CuO and CuO nanostructures from spent printed circuit boards and their dye degradation studies. Environmental Science and Pollution Research .

Ghandy, Jehangir (1968) Opening address. NML Technical Journal, 10 (3). pp. 8-11.

Gharami, Kalpataru and Patra, H R and Kumar, Manoj and Randhawa, N S (2016) Thermodynamic consideration and phase evolution during oxidation of tungsten-copper electrical contactor scraps. Russian Journal Of Non-Ferrous Metals, 57(4) (IF-0.238). pp. 361-366.

Ghatak, S K (2001) High temperature superconducting materials. Journal of Metallurgy and materials Science, 43 (2). pp. 67-75.

Ghorai, S and Mandal, G K and Roy, S and Minj, R K and Agarwal, Anup and Singh, D P and Kumar, A and Ramna, R B V (2017) Treatment of LF slag to prevent powdering during cooling. Journal of Mining and Metallurgy Section B- Metallurgy , 53(2)B (IF-0.804). pp. 123-130.

Ghose, B N and Bhattacharya, J and De, P K (1996) Enhancement of quality of steel sheet through process optimisation. NML Technical Journal, 38 (2). pp. 51-62.

Ghose, M K and Debnath, P C and Kar, B C (1964) Spectrochemical determination of antimony in lead-tin-solders. NML Technical Journal, 6 (3). pp. 6-9.

Ghose, M K and Pait, S and Kar, B C (1961) Spectrographic analysis of high chromium-manganese austenitic stainless steel by porous cup technique using neutral filter. NML Technical Journal, 3 (4). pp. 10-15.

Ghose, M K and Pait, S and Kar, B C (1960) Spectrographic determination of boron in steel by rotating electrode method. NML Technical Journal, 2 (3). pp. 12-14.

Ghose, M K and Rajeev, and Gopalkrishna, S V (1978) X-ray fluorescence analysis of silica and alumina in some ores. NML Technical Journal, 20 (3-4). pp. 46-51.

Ghosh, A and Das, T K and Sharma, A K and Mukherjee, R and Bhushan, A and Sagar, S P (2021) Microwave-assisted infrared thermography: A tool for quality assessment of blast furnace feeds. Infrared Physics & Technology, 114 .

Ghosh, Anirban and Abhilash, and Pandey, B D (2015) A study on organo-sulfur tolerant bacterial strains from extremophilic coal mine environment- isolation and growth factors. Indian Journal of Geo-Marine Sciences, 44(3) (IF-0.616). (In Press)

Ghosh, Arindam and Chatterjee, S and Mishra, B and Das, Samar (2005) Microstructure, properties, and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel. Metallurgical and Materials Transactions A, 36 (3). pp. 703-713.

Ghosh, Arindam and Das, S and Chatterjee, S and Ramachandrarao, P (2006) Effect of cooling rate on structure and properties of an ultra-low carbon HSLA-100 grade steel. Materials Characterization, 56 (1). pp. 59-65.

Ghosh, Arindam and Das, Samar and Chatterjee, S (2008) Ageing behavior of a Cu-bearing ultrahigh strength steel. Materials Science and Engineering A, 486 (1-2). pp. 152-157.

Ghosh, Arindam and Das, Samar and Chatterjee, S (2005) Ultrahigh strength hot rotted microalloyed steel: microstructure and properties. Materials Science and Technology, 21 (3). pp. 325-333.

Ghosh, Arindam and Das, Samar and Chatterjee, S and Mishra, B and Ramachandrarao, P (2003) Influence of thermo-mechanical processing and different post-cooling techniques on structure and properties of an ultra low carbon Cu bearing HSLA forging. Materials Science and Engineering A, 348 (1-2). pp. 299-308.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2004) An ultra low carbon Cu bearing steel: influence of thermomechanical processing and aging heat treatment on structure and properties. Materials Science and Engineering A, 374 (1-2). pp. 43-55.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2005) Structure and properties of a low carbon Cu bearing high strength steel. Materials Science and Engineering A, 396 (1-2). pp. 320-332.

Ghosh, Arindam and Shukla, R and Das, S and Chatterjee, S (2006) The structure and properties of a thermo-mechanically processed low carbon high strength steel. Steel Research International , 77 (4). pp. 276-283.

Ghosh, Arpita and Das, T K and Nayak, B and Palit Sagar, S (2013) A non-invasive technique for sorting of alumina-rich iron ores. Minerals Engineering, 45(55–58) (IF-1.207). pp. 55-58.

Ghosh, Arpita and Sahoo, S and Ghosh, M and Ghosh, R N and Chakrabarti, D (2014) Effect of microstructural parameters,micro texture and matrix strain on the Charpy impact properties of low carbon HSLA steel containing MnS inclusions. Materials Science and Engineering A, 613 (IF-2.409). pp. 37-47.

Ghosh, Arpita and Sahu, M and Singh, P K and Kumar, S and Ghosh, M and Palit Sagar, S (2019) Assessment of Mechanical Properties for Dissimilar Metal Welds: A Non-destructive Approach. Journal of Materials Engineering and Performance, 28(2) (IF-1.476). pp. 900-907.

Ghosh, Arpita and Sharma, Arun Kumar and Nayak, B and Palit Sagar, S (2014) Infrared thermography: An approach for iron ore gradation. Minerals Engineering, 62 (IF-1.714). pp. 85-90.

Ghosh, Arpita and Sivaprasad, S and Bhattacharjee, A and Kar, S (2013) Microstructure-fracture toughness correlation in an aircraft structural component alloy Ti-5Al-5V-5Mo-3Cr. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 568 (IF-2.108). pp. 61-67.

Ghosh, B N and Lal, Kishori and De, P K and Sivaramakrishnan, C S and Ramachandrarao, P (1996) Development of ferritic stainless steel for catalytic converter. NML Technical Journal, 38 (3). pp. 117-121.

Ghosh, C and Chatterjee, S (2012) Microstructural evolution at the interface of bond coat and steel substrate during galvanization. Journal of Metallurgy and Materials Science, 54(2) . pp. 149-153.

Ghosh, Ishita and Das, Suchandan K and Chakraborty, N (2014) An artificial neural network model to characterize porosity defects during solidification of A356 aluminum alloy. Neural Computing and Applications, 25 (IF-1.763). pp. 653-662.

Ghosh, K C and Mukherjee, B C and Ganguly, N N and Yusuf, M and Choudhury, V N (1992) A rapid complexometric scheme for analysis of iron, aluminum, calcium and magnesium in slags. Talanta, 39 (6). pp. 675-679.

Ghosh, M (2023) Effect of flue gas constituents on boiler tube failure of a captive power plant. Engineering Failure Analysis .

Ghosh, M (2023) Failure Investigation of Boiler Tube: A Root Cause Analysis. Journal of Failure Analysis & Prevention .

Ghosh, M and Bansal, Gourav and Chandan, A and Shah, Minal and Tripathy, S and Murugaiyan, Premkumar and Sahoo, Biraj and Mukherjee, K and Srivastava, V C and Ghosh Chowdhury, S (2017) Functionally Driven Steels: A Review. Steel Tech, 12(1) (NonSCI). pp. 13-36.

Ghosh, M and Barat, K and Das, Swapan K and Ravi Kumar, B and Pramanick, A K and Chakraborty, J and Das , Goutam and Hadas, S and Bharathy, S and Ray , S K (2014) Variation in Mechanical Properties and Heterogeneity in Microstructure of High-Strength Ferritic Steel During Mill Trial. Metallurgical Transaction A, 45A (IF-1.730). pp. 2719-2731.

Ghosh, M and Chatterjee, S (2005) Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel. Materials Characterization, 54 (4-5). pp. 327-337.

Ghosh, M and Das, Samar and Banarjee, P S and Chatterjee, S (2005) Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple. Materials Science and Engineering A, 390 (1-2). pp. 217-226.

Ghosh, M and Dutta, B K and Basumallick, A and Ghosh, S (2001) Preparation of copper-tin compacts by warm compaction route. Journal of Metallurgy and materials Science, 43 (2). pp. 119-125.

Ghosh, M and Gunjan, M K and Das, Swapan K and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2010) Effect of Mn on Sn–Ag–Cu ternary lead free solder alloy–Cu assembly: a comparative study. Materials Science and Technology, 26 (5). pp. 610-614.

Ghosh, M and Gupta, R K and Husain, M M (2014) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transactions A, 45A (IF-1.730). pp. 854-863.

Ghosh, M and Husain, M M and Gupta, R K (2012) Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Plain Carbon Steel. ISIJ International, 52 (3). pp. 477-482.

Ghosh, M and Husain, M M and Kumar, K and Kailas, S V (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. Journal of Materials Engineering and Performance , 22(12) (IF-0.915). pp. 3890-3901.

Ghosh, M and Kar, Abhijit and Das, Swapan K and Ray, Ajoy K (2009) Aging Characteristics of Sn-Ag Eutectic Solder Alloy with the Addition of Cu, In, and Mn. Metallurgical and Materials Transactions A, 40A . pp. 2369-2376.

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V (2012) Structural characterisation of reaction zone for friction stir welded aluminium–stainless steel joint. Materials Technology, 27 (2). pp. 169-172.

Ghosh, M and Kumar, K and Kailas, S V and Ray, Ajoy K (2010) Optimization of friction stir welding parameters for dissimilar aluminum alloys. Materials & Design, 31 (6). pp. 3033-3037.

Ghosh, M and Kumar, K and Mishra, R S (2010) Analysis of microstructural evolution during friction stir welding of ultrahigh-strength steel. Scripta Materialia, 63 (8). pp. 851-854.

Ghosh, M and Kumar, K and Mishra, R S (2011) Friction stir lap welded advanced high strength steels: Microstructure and mechanical properties. Materials Science and Engineering A, 528 . pp. 8111-8119.

Ghosh, M and Kumar, K and Mishra, R S (2012) Process Optimization for Friction-Stir-Welded Martensitic Steel. Metallurgical & Materials Transactions A, 43A . pp. 1966-1975.

Ghosh, M and Kumar, Rajneesh and Husain, M M (2013) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transaction A (IF-1.738).

Ghosh, M and Mahato, B and Ravi Kumar, B (2023) Operational Failure of Vertical Roller Attached to a Grinding Mill: Root Cause Analysis. Operational Failure of Vertical Roller Attached to a Grinding Mill: Root Cause Analysis .

Ghosh, M and Santosh, R and Das, Swapan K and Das, Goutam and Mahato, B and Korody, J and Kumar, S and Singh, P K (2015) Effect of Structural Heterogeneity on In Situ Deformation of Dissimilar Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions A, 46A (IF-1.730). pp. 3555-3568.

Ghosh, M K (1978) Applications of solution technique using synthetic standards in spectrochemical analysis. NML Technical Journal, 20 (1-2). pp. 6-14.

Ghosh, M K (1963) The Delhi Iron Pillar and its iron. NML Technical Journal, 5 (1). pp. 31-45.

Ghosh, M K (1980) Spectrochemical analysis of aluminium. NML Technical Journal, 22 (1-2). pp. 20-23.

Ghosh, M K (1983) Spectrochemical determination of silver in copper concentrate. NML Technical Journal, 25 (3-4). pp. 46-48.

Ghosh, M K (1970) Spectrographic analysis of low alloy steels by solution technique. NML Technical Journal, 12 (3). pp. 74-77.

Ghosh, M K and Chakrabarti, H K (1970) Spectrographic analysis of nodular cast iron for magnesium. NML Technical Journal, 12 (4). pp. 97-100.

Ghosh, M K and Gopalakrishna, S V (1970) Method of Spectrographic Analysis of Aluminium and Aluminium Alloys by Using Synthetic Standards. NML Technical Journal, 12 (2). pp. 61-64.

Ghosh, M K and Gopalkrishna, S V and Chakrabarti, H K (1975) Spectrochemical analysis of residual impurities in ferrro-chrome by solution-spark technique. Metallurgy & Metallurgical Engineering, 42 (12). p. 410.

Ghosh, M K and Gopalkrishna, S V and Chakrabarti, H K (1971) Spectrographic method of determination of niobium in steel. NML Technical Journal, 13 (4). pp. 100-103.

Ghosh, M K and Rajeev, and Gopalkrishna, S V (1978) X-ray fluorescence analysis of silica and alumina in some ores. NML Technical Journal, 20 (3-4). pp. 46-51.

Ghosh, N and Padhi, K K and Ghosal, S and Biswas, A C and Pandey, L P (1980) Determination of molybdenum and copper in Mu metal type alloy. NML Technical Journal, 22 (3-4). pp. 43-44.

Ghosh, P (1988) Silica in boiler water. Anti-Corrosion Methods and Materials, 35 (10). pp. 8-14.

Ghosh, R N (1994) Modeling high-temperature creep of anisotropic material. Bulletin of Materials Science, 17 (7). pp. 1341-1350.

Ghosh, R N and Chaudhuri, S (1994) Creep strain prediction of 2-1/4-cr-1mo steel - a model-based approach. Bulletin of Materials Science, 17 (6). pp. 663-670.

Ghosh, R N and Chaudhuri, S and Roy, Nilima and Chattopadhyay, Lalitha (1995) Creep life extension of high-temperature components under wall thinning conditions. Sadhana-Academy Proceedings in Engineering Sciences, 20 ( ). pp. 331-339.

Ghosh, R N and Curtis, R V and MClean, M (1990) Creep deformation of single-crystal superalloys - modeling the crystallographic anisotropy. Acta Metallurgicaet Materiala, 38 (10). pp. 1977-1992.

Ghosh, R N and Mclean, M (1992) High-temperature deformation in engineering alloys - modeling for strain or load control. Acta metallurgica et materialia, 40 (11). pp. 3075-3083.

Ghosh, R N and Mclean, M (1989) Modelling the orientation dependence of tertiary creep in single crystal superalloys. Scripta Metallurgica, 23 (8). pp. 1301-1306.

Ghosh, R N and Mitra, A (1983) Computer simulation of high temperature creep recovery and work hardening rate measurement techniques. Metal Science, 17 (12). pp. 590-600.

Ghosh, R N and Singh, R and Kumar, R (1985) An analysis of tertiary creep in Cr---1 Mo steel. Scripta Metallurgica, 19 (7). pp. 801-804.

Ghosh, R N and Singh, Raghubir and Kumar, Rajendra (1985) An analysis of tertiary creep in 2(1/4) Cr-1 Mo-steel. Scripta metallurgica, 19 (7). pp. 801-804.

Ghosh, Rachit and Gupta, S K and Kumar, A and Kumar, S (2019) Durability and Mechanical Behavior of Fly Ash-GGBFS Geopolymer Concrete Utilizing Bottom Ash as Fine Aggregate. Journal Transactions of the Indian Ceramic Society, 78(1) . pp. 24-33.

Ghosh, Rachit and Gupta, S K and Kumar, Anil and Kumar, Sanjay (2018) Leaching and efflorescence effects in geopolymer concrete. Journal of Metallurgy and Materials Science, 60(2) . pp. 79-88.

Ghosh, Rachit and Gupta, S K and Kumar, Anil and Kumar, Sanjay (2018) Replacement of conventional fine aggregate with bottom ash in geopolymer concrete. Journal of Metallurgy and Materials Science, 60(3) . pp. 173-187.

Ghosh, Rachit and Kumar, Anil and Kumar, Sanjay (2013) Flyash Geopolymer Concrete as Future Concrete. International Journal of Advanced Scientific and Technical Research, 6(3) . pp. 260-271.

Ghosh, Rachit and Sagar, S P and Kumar, Anil and Gupta, S K and Kumar, Sanjay (2018) Estimation of geopolymer concrete strength from ultrasonic pulse velocity (UPV) using high power pulser. Journal of Building Engineering, 16 . pp. 39-44.

Ghosh, Rita and Singh, D D N (2007) Kinetics, mechanism and characterisation of passive film formed on hot dip galvanized coating exposed in simulated concrete pore solution. Surface and Coatings Technology, 201 (16-17). pp. 7346-7359.

Ghosh, Rita and Singh, R J and Singh, D D N (2003) Comparing the corrosion resistance of thermo-mechanically treated rebars of low alloy and mild steels embedded in chloride-contaminated concrete mortars. Corrosion Prevention & Control , 50 (2). pp. 94-103.

Ghosh, Rita and Singh, R J and Singh, D D N (2003) Role of fluoride in accelerating corrosion and pitting of steel in concrete environments. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 391-397.

Ghosh, S and Das, S K (1998) Carbide Morphology Observations in Rare-Earth-Treated Fe-Al-Si-C Alloys. Materials Characterization, 41 (5). pp. 217-221.

Ghosh, S and Dash, R R and Rao, G N (1980) The silica soda ratios of sodium silicate: Its foundry importance. NML Technical Journal, 22 (3-4). pp. 31-34.

Ghosh, S and Mondal, P and Rathina, B and Chatterjee, K (2020) Effect of dual crosslinking on physico-chemical properties of hydrogels prepared from chitosan and alginate. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 31-40.

Ghosh, S and Prodhan, A and Mohanty, O N and Chakrabarti, A K (1996) A study on the oxidation characteristics of cast irons containing aluminum. Oxidation of Metals, 45 (1-2). pp. 109-131.

Ghosh, S and Sahu, Ranjan K and Raj, C Retna (2012) Pt-Pd alloy nanoparticle-decorated carbon nanotubes: a durable and methanol tolerant oxygen reduction electrocatalyst. Materials and Corrosion-Werkstoffe Und Korrosion, 23(38) .

Ghosh, Sabita and Das, Goutam (2012) Effect of pre strain on the indentation fracture toughness of high strength low alloy steel by means of continuum damage mechanics. Engineering Fracture Mechanics, 79 . pp. 126-137.

Ghosh, Sabita and Pal, T K and Mukherjee, Surojit and Das, Goutam and Ghosh, Sukomal (2008) Comparative study of heat-affected zone with weld and base material after post-weld heat treatment of HSLA steel using ball indentation technique. Journal of Materials Science, 43 (16). pp. 5474-5482.

Ghosh, Sabita and Prakash, R V (2013) Study of Damage and Fracture Toughness due to Influence fo Creep and Fatigue of Commercially Pure Copper by Monotonic and Cyclic Indentation. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science , 44A(1) (IF-1.738). pp. 224-234.

Ghosh, Sabita and Sahay, S K and Das, Goutam (2004) Ball indentation technique - An important and useful method for studying the flow properties of materials. Transactions Of The Indian Institute Of Metals, 57 (1). pp. 51-60.

Ghosh, Sabita and Sahay, S K and Das, Goutam (2004) Effectiveness of ball indentation technique for evaluating mechanical properties of micro alloyed steel. Journal of Metallurgy and materials Science, 46 (2). pp. 95-105.

Ghosh, Sabita and Tarafder, Mita and Sivaprasad, S and Tarafder, S (2010) Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 617-622.

Ghosh, Sabita and Yadav, Sandip and Das, Goutam (2008) Ball Indentation Technique: A currently developed tool to study the effect of various heat treatments on the mechanical properties of En24 steel. Materials Letters, 62 (24). pp. 3966-3968.

Ghosh, Sabita and Yadav, Sandip and Das, Goutam (2008) Study of standard heat treatment on mechanical properties of Inconel 718 using ball indentation technique. Materials Letters, 62 (17-18). pp. 2619-2622.

Ghosh, Sourov and Sahu, Ranjan K and Raj, C Retna (2011) Shape-regulated high yield synthesis of electrocatalytically active branched Pt nanostructures for oxygen reduction and methanol oxidation reactions. Journal of Materials Chemistry, 21 (32). pp. 11973-11980.

Ghosh, Swati and Kain, V and Ray, A and Roy, H and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Deterioration in Fracture Toughness of 304LN Austenitic Stainless Steel Due to Sensitization. Metallurgical and Materials Transactions A, 40 (12). pp. 2838-2949.

Ghosh Chowdhury, S (2005) Development of texture during cold rolling in AA5182 alloy. Scripta Materialia, 52 (2). pp. 99-105.

Ghosh Chowdhury, S and Das, Samar and De, P K (2005) Cold rolling behaviour and textural evolution in AISI 316L austenitic stainless steel. Acta Materialia, 53 (14). pp. 3951-3959.

Ghosh Chowdhury, S and Das, Samar and Ravi Kumar, B and De, P K (2006) Twinning-induced sluggish evolution of texture during recrystallization in AISI 316L stainless steel after cold rolling. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials, 37 A (8). pp. 2349-2359.

Ghosh Chowdhury, S and Das, Swapan K and Ravi Kumar, B and Kumar, S and Gottstein, G (2002) Textural development in AISI 316 stainless steel during cold rolling and annealing. Textures of Materials, 408-4 . pp. 1371-1376.

Ghosh Chowdhury, S and Datta, Sudarsan and Ravi Kumar, B and De, P K and Ghosh, R N (2007) Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel. Materials Science and Engineering A, 443 (1-2). pp. 114-119.

Ghosh Chowdhury, S and Dutta, Abhijit and Ravi Kumar, B and Kumar, Amit (2006) Textural evolution during accumulative roll bonding of an Al–Li alloy. Materials Science and Engineering A, 428 (1-2). pp. 351-357.

Ghosh Chowdhury, S and Gubicza, Jeno and Mahato, B and Chinh, Nguyen Q and Hegedus, Zoltan and Langdon, T G (2011) Texture evolution during room temperature ageing of silver processed by equal-channel angular pressing. Scripta Materialia, 64 (11). pp. 1007-1010.

Ghosh Chowdhury, S and Jena, A K and Ray, R K (2000) Recovery and ordering in cold-rolled boron-doped Ni76Al24. Metallurgical and Materials Transactions A, 31 (9). pp. 2127-2134.

Ghosh Chowdhury, S and Jena, A K and Ray, R K (1998) Recrystallization behavior of boron-doped Ni76Al24. Metallurgical and Materials Transactions A, 29 (12). pp. 2893-2902.

Ghosh Chowdhury, S and Kumar, P and Das, Arpan and Das, Swapan K and Mahato, B and De, P K (2008) Evolution of grain-boundary character distribution during iterative processing of an austenitic stainless steel. Philosophical Magazine Letters Online ISSN 1362-3036, 88 (6). pp. 407-414.

Ghosh Chowdhury, S and Kumar, Pravesh and Das, Swapan K and Bhattacharya, D K and Parida, N (2001) Failure analysis of high temperature studs. Engineering Failure Analysis, 8 (6). pp. 521-528.

Ghosh Chowdhury, S and Mahato, B and Da silva, H R and Lourenco, G G and Santos, D B (2008) Evolution of texture in ultra-fine grained ferrite through warm-rolling and intercritical annealing. Nanomaterials By Severe Plastic Deformation Iv, Pts 1 And 2 Book Series: Materials Science Forum , 584-586 (1-2). pp. 610-616.

Ghosh Chowdhury, S and Minz, R K and Rajnikanth, V and Munda, Parikshit and Shah, Minal and Das, Swapan K and Sahoo, K L and Paul, K K (2015) Development of new silt erosion resistant steel for hydro turbine components. Iron & Steel Review, 59(6) .

Ghosh Chowdhury, S and Mondal, Amit and Gubicza, Jeno and Krallics, Gyorgy and Fodor, Arpad (2008) Evolution of microstructure and texture in an ultrafine-grained Al6082 alloy during severe plastic deformation. Materials Science and Engineering A, 490 (1-2). pp. 335-342.

Ghosh Chowdhury, S and Mukhopadhyay, N K and Das, Goutam and Das, Swapan K and Bhattacharya, D K (1998) Failure analysis of aweld repaired steam turbine casing. Engineering Failure Analysis, 5 (3). pp. 205-218.

Ghosh Chowdhury, S and Pereloma, Elena V and Santos, D B (2009) Corrigendum to “Evolution of texture at the initial stages of continuous annealing of cold rolled dual-phase steel: Effect of heating rate” [Mater. Sci. Eng.: A 480 (2008) 540–548]. Materials Science and Engineering: A , 525 (1-2). 211- .

Ghosh Chowdhury, S and Pereloma, Elena V and Santos, D B (2008) Evolution of texture at the initial stages of continuous annealing of cold rolled dual-phase steel: Effect of heating rate. Materials Science and Engineering A, 480 (1-2). pp. 540-548.

Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and Singh, Raghuvir (2011) Influence of Processing on Texture, Grain Boundary Structure and Corrosion Behaviour of Austenitic Stainless Steels. Steel Tech, 5 (4). pp. 43-57.

Ghosh Chowdhury, S and Ray, R K (2005) Violation of Schmid's law and tension-compression asymmetry in L1(2) structured alloys: role of ordered structure. Materials Science and Technology, 21 (2). pp. 211-217.

Ghosh Chowdhury, S and Ray, R K and Jena, A K (2007) Deformation-induced structural transformation in boron-doped Ni76Al24. Intermetallics, 15 (3). pp. 260-269.

Ghosh Chowdhury, S and Ray, R K and Jena, A K (1998) Rolling texture in the intermetallic compound Ni76Al24(B). Materials Science and Engineering A, 246 (1-2). pp. 289-301.

Ghosh Chowdhury, S and Ray, R K and Jena, A K (2000) Texture evolution during recrystallization in a boron-doped Ni76Al24 alloy. Materials Science and Engineering A, 277 (1-2). pp. 1-10.

Ghosh Chowdhury, S and Sahu, Puspendu and Mahato, B and De, P K (2009) Evolution of Recrystallization Texture in AISI300 Series Austenitic Stainless Steels After Cold Rolling to Large Strain. Microstructure and Texture in Steels, 22 (22). pp. 361-378.

Ghosh Chowdhury, S and Singh, Raghuvir (2008) The influence of recrystallized structure and texture on the sensitization behaviour of a stable austenitic stainless steel (AISI 316L). Scripta Materialia, 58 (12). pp. 1102-1105.

Ghosh Chowdhury, S and Srivastava, V C and Ravi Kumar, B and Soren, S (2006) Evolution of texture during accumulative roll bonding (ARB) and its comparison with normal cold rolled aluminium–manganese alloy. Scripta Materialia, 54 (9). pp. 1691-1696.

Ghosh Chowdhury, S and Xu, Cheng and Langdon, T G (2008) Texture evolution in an aluminum alloy processed by ECAP with concurrent precipitate fragmentation. Materials Science and Engineering: A, 473 (1-2). pp. 219-225.

Gioe, Dorian and Hendrickx, Frederik and Demuynck, Maryse and Errauw, Jean-Pierre and Kumar, Rajneesh and Maas, Fleur (2012) Staal Koud Lassen, Feit of Frictie? (Cold Steel Welding, Fact Or Fiction?). Metallerie, 4 .

Godiwalla, K M and Das, Suchandan K and Sivaramakrishnan, C S (1999) Mathematical modelling of electromagnetic phenomenon in aluminium smelting cells. Transactions of the Indian Institute of Metals, 52 (2-3). pp. 103-108.

Godiwalla, K M and Roy, Nilima and Chaudhuri, S and Ray, Ashok K (2001) Investigation and modeling of mechanical properties for thermal barrier coatings under bending. International Journal of Turbo & Jet-Engines, 18 (2). pp. 77-103.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1992) Fluid-flow in twin strand tundish water model. Transactions of the indian institute of metals, 45 (4). pp. 247-251.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1994) Simulation of fluid-flow phenomena in continuous-casting multistrand tundish through water modeling. Transactions of the indian institute of metals, 47 (5). pp. 333-337.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1995) Simulation of pneumatically agitated metallurgical vessels through water modelling. Scandinavian Journal Of Metallurgy, 24 (2). pp. 81-85.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1994) Statistical analysis of residence time distribution of fluid elements in continuous casting water model tundish with one side entry. 77th steelmaking conference, 77 ( ). pp. 703-712.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1993) Thermal stratification phenomena in a 4-strand cc tundish during teeming of steel water model study. ISIJ International, 33 (4). pp. 519-521.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1994) Water model simulation of tundish flow under varying conditions. Steel Research, 65 (7). pp. 267-272.

Gopalakrishna, K and Sivaprasad, S and Venkateswarlu, K and Hari Kumar, K C (2012) Microstructural evolution and aging behavior of cryorolled Al-4Zn-2Mg alloy. Materials Science and Engineering A, 535 (IF-2.003). pp. 129-135.

Gopinath, K and Gupta, R K and Sahu, J K and Ray, P K and Ghosh, R N (2015) Designing P92 grade martensitic steel header pipes against creep–fatigue interaction loading condition: Damage micromechanisms. Materials & Design, 86 (IF-3.501). pp. 411-420.

Gorai, Bipra and Jana, R K and Khan, Z H (2002) Electrorefining electrolyte from copper plant dust. Materials Transactions, 43 (3). pp. 532-536.

Gorai, Bipra and Jana, R K and Premchand, (2003) Characteristics and utilisation of copper slag - a review. Resources Conservation and Recycling, 39 (4). pp. 299-313.

Gorain, N and Walunj, M G and Soni, and Kumar, M and Kumar, B R (2020) Effect of continuous annealing process on various structure parameters of martensite of dual-phase steels. Archives of civil and mechanical engineering, 29(4) (IF-3.672). pp. 2305-2015.

Gostu , S and Mishra, D and Sahu, K K and Agrawal, A (2014) Precipitation and characterization of zinc borates from hydrometallurgical processing of zinc ash. Materials Letters, 134 (IF-2.269). pp. 198-201.

Goswami, B and Kumar, S B and Ray, Ashok K (2011) Perspectives of developments in nickel based allied systems. Journal of Metallurgy and Materials Science, 53 (3). pp. 233-252.

Goswami, B and Kumar, S B and Ray, Ashok K (2012) Perspectives of recent developments in nickel base superalloys. Journal of Metallurgy and Materials Science, 54(1) . pp. 31-52.

Goswami, B and Mahato, K and Sharma, V (2012) Traditional insight of strategies in steel philosophies. Journal of Metallurgy and Materials Science, 54(1) . pp. 1-29.

Goswami, B and Raj, A and Singh, M P and Ray, Ashok K (2013) Mechanical properties and ferrite formation in microalloyed steel. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 1-19.

Goswami, B and Raj, A and Srivastava, S C and Ray, Ashok K (2014) Vanadium in industrial traditions and innovations. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 149-161.

Goswami, B and Ravi Kumar, B and Tarafder, S and Guguloth, K and Rupa, P K P and Kumar, S B and Ray, Ashok K (2007) Fatigue damage of a thermal barrier coated Ni-base superalloy. High Temperature Materials and Processes, 26 (3). pp. 209-219.

Goswami, B and Ray, A K (2018) Traditions in hardfacing technology and wear resistance-1. Journal of Metallurgy and Materials Science, 60(1) . pp. 25-48.

Goswami, B and Ray, A K (2018) Traditions in hardfacing technology and wear resistance-2. Journal of Metallurgy and Materials Science, 60(2) . pp. 105-124.

Goswami, B and Ray, Ashok K (2010) Emerging trends in alternative processing and weather effects of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 52 (3). pp. 187-208.

Goswami, B and Ray, Ashok K (2010) Emerging trends in joining processes of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 52 (2). pp. 109-128.

Goswami, B and Ray, Ashok K (2009) Emerging trends in mechanical properties of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 51 (3). pp. 149-173.

Goswami, B and Ray, Ashok K (2011) Emerging trends in plasticity and precipitation of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 53 (1). pp. 1-23.

Goswami, B and Ray, Ashok K (2010) Emerging trends in precipitation phenomenon of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 52 (1). pp. 19-45.

Goswami, B and Ray, Ashok K (2011) Emerging trends of alloy and composite formation in Al-Li-X alloys. Journal of Metallurgy and Materials Science, 53 (2). pp. 109-131.

Goswami, B and Ray, Ashok K (2011) Perspectives of innovations in superalloys for gas turbines. Journal of Metallurgy and Materials Science, 53 (4). pp. 325-347.

Goswami, B and Ray, Ashok K (2008) Perspectives of nanocrystalline materials and metallic glass in pure nickel and nickel base alloys. Journal of Metallurgy and Materials Science, 50 (4). pp. 195-217.

Goswami, B and Ray, Ashok K (2009) Perspectives of sensor alloys in nickel base systems. Journal of Metallurgy and Materials Science, 51 (1). pp. 1-20.

Goswami, B and Ray, Ashok K (2009) Perspectives of shape memory surgical alloys in nickel base systems. Journal of Metallurgy and Materials Science, 51 (2). pp. 77-89.

Goswami, B and Ray, Ashok K (2009) Recent bio-medical alloys in cobalt base systems. Journal of Metallurgy and Materials Science, 51 (4-5). pp. 233-246.

Goswami, B and Ray, Ashok K (2007) Studies on certain aspect of superconductivity with reference to high Tc superconductors. Journal of Metallurgy and Materials Science, 49 (4). pp. 183-213.

Goswami, B and Ray, Ashok K and Raj, A (2015) Frontiers in materials and processing in chemical plants. Journal of Metallurgy and Materials Science, 57(2) . pp. 57-65.

Goswami, B and Ray, Ashok K and Raj, A (2015) Frontiers in materials for air frame structure. Journal of Metallurgy and Materials Science, 57(4) . pp. 187-195.

Goswami, B and Ray, Ashok K and Raj, A (2015) Frontiers in materials for fastening and joining. Journal of Metallurgy and Materials Science, 57(3) . pp. 115-126.

Goswami, B and Ray, Ashok K and Sahay, S K (2004) Thermal barrier coating system for gas turbine application - A review. High Temperature Materials And Processes, 23 (2). pp. 73-92.

Goswami, B and Sahay, S K and Ray, Ajoy K (2004) Application of thermal barrier coatings on combustion chamber liners - A review. High Temperature Materials And Processes , 23 (3). pp. 211-236.

Goswami, B and Sahay, S K and Ray, Ashok K (2008) Application of thermal barrier coating in light weight gas turbine. Journal of Metallurgy and Materials Science, 50 (1). pp. 1-21.

Goswami, J and Ghosh, S B and Chatterjea, A B and Altekar, V A (1972) Some observations on the production of iron powder by atomization. NML Technical Journal, 14 (3). pp. 94-101.

Goswami, M C (1997) Interrelation between kinetics of reduction and volume change during formation of directly reduced iron rod. Steel Research, 68 (12). pp. 507-511.

Goswami, M C (1999) On the strength and reduction characteristics of fluxed composite iron ore pellets. NML Technical Journal, 40 (4). pp. 163-170.

Goswami, M C and Biswas, P K and Vaish, A K (2001) Kinetics of reduction of low grade iron ore by charcoal. Journal of Metallurgy and materials Science, 43 (3). pp. 181-188.

Goswami, M C and Mahapatra, A K S and Prakash, S (1997) Briquetting of waste coke fines for industrial utilization. NML Technical Journal, 39 (1). pp. 31-38.

Goswami, M C and Pal, J (2002) Role of coke quality in improving blast furnace performance. Journal of Metallurgy and materials Science., 44 (2). pp. 91-102.

Goswami, M C and Prakash, S (1999) Smelting Reduction Kinetics of Fluxed Composite Reduced Iron Pellets(FCIP). Tool & Alloy Steels, 32 ( ). pp. 11-19.

Goswami, M C and Prakash, S and Sarkar, B (1998) A reacting system cold-model foaming study simulating in-bath smelting. Scandinavian Journal Of Metallurgy, 27 (3). pp. 97-102.

Goswami, M C and Prakash, S and Sarkar, S B (1999) Kinetics of smelting reduction of fluxed composite iron ore pellets. Steel Research, 70 (2). pp. 41-46.

Goswami, M C and Prakash, S and Sarkar, S B (1998) A reading system cold-model foaming study simulating in-bath smelting. Scandinavian Journal Of Metallurgy, 27 (3). pp. 97-102.

Goswami, M C and Prakash, S and Sinha, S N and Tiru, P (1998) Experimental study on the foaming phenomena in a non-reacting system. NML Technical Journal, 40 (2). pp. 51-56.

Goswami, M C and Singh, S D and Vaish, A K (1998) Smelting reduction of lean pyrite cynder of complex mineralogy for the production of low silicon ferro-alloys. Tool & Alloy Steels, 32 (3). pp. 9-14.

Goswami, M C and Sinha, A K Mahapatra and Gupta, K N (1987) Iron ore sinter as iron burden in Indian blast furnaces. NML Technical Journal, 29 (1-4). pp. 33-38.

Goswami, N G and Ghoshal, T K and Mishra, K K (1995) Modalities of technology transfer: A few case studies. NML Technical Journal, 37 (1). pp. 33-42.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of copper and iron on the wear properties of spray formed Al–28Si alloy. Materials & Design, 51 (IF-2.913). pp. 383-390.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of secondary processing on the microstructure and wear behavior of spray formed Al–30Mg 2 Si–2Cu alloy. Materials & Design, 47 (IF-2.913). pp. 489-496.

Goudar, D M and Rudrakshi, G B and Reddy, G J and Srivastava, V C and Wagamode , J (2012) Microstructural and hardness of spray deposited Al-30Mg2Si-2Cu alloy in solutionized and aged conditions. Materials Science : An Indian Journal, 0974-7486, 8 (8). pp. 303-308.

Goudar, D M and Rudrakshi, G B and Srivastava, V C (2011) Microstructures and Mechanical properties of Spray deposited and Heat-treated Al-25Mg2Si-2Cu alloy. Innovative Systems Design and Engineering, 2 (6). pp. 72-85.

Goudar, D M and Rudrakshi, G B and Srivastava, V C and Reddy, J and Joshi, A G (2011) Spray Deposition Process of Hypereutectic Al – Si alloys: An overview. International Journal of Scientific and Engineering Research, ISSN 2229-5518, 2 (6). pp. 1-10.

Goudar, D M and Srivastava, V C and Rudrakshi, G B (2017) Effect of Atomization Parameters on Size and Morphology of Al-17Si Alloy Powder Produced by Free Fall Atomizer. Engineering Journal, 21(1) (IF-0.384). pp. 155-168.

Goudar, D M and Srivastava, V C and Rudrakshi, G B and Raju, K and Ojha, S N (2015) Effect of Tin on the Wear Properties of Spray Formed Al–17Si Alloy. http://link.springer.com/article/10.1007%2Fs12666-015-0573-1, 68 (IF-0.615). pp. 3-7.

Govind, and Nair, K S and Mittal, M C and Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S (2001) Development of rapidly solidified (RS) magnesium–aluminium–zinc alloy. Materials Science and Engineering A, 304-306 . pp. 520-523.

Govindaraj, M and Muthkumar, M and Bhaskar Raju, G (2010) Electrochemical oxidation of tannic acid contaminated wastewater by RuO2/IrO2/TaO2-coated titanium and graphite anodes. Environmental Technology, 31 (14). pp. 1613-1622.

Grahvardhan, G and Singh, J and Kumar, S and Patel, V K and Gangil, B (2019) Study of mechanical and abrasive wear behavior of glass fibre reinforced epoxy-talc/mustard cake hybrid compositions. Journal of Metallurgy and Materials Science, 61(1) . pp. 11-23.

Guguloth, K and Fernando, D.C and Paulose, N and Sahu, J K (2021) Evolution of microstructure during tensile creep deformation of nickel-based disk superalloy. International Journal of Pressure Vessels and Piping, 194 Part A .

Guguloth, K and Ghosh, M and Swaminathan, J and Mitra, R (2020) Tensile creep and rupture behavior along with evolution of microstructure in a Zr-2.5Nb alloy. Materials Science and Engineering A, 791 . p. 139681.

Guguloth, K and Mitra, Rahul and Ghosh Chowdhury, S and Swaminathan, J (2018) Mechanism of creep deformation with evolution of microstructure and texture of Zr-2.5Nb alloy. Materials Science and Engineering: A, 721 (IF-3.094). pp. 286-302.

Guguloth, K and Roy, Nilima (2017) Creep deformation behavior of 9Cr1MoVNb (ASME Grade 91) steel. Materials Science and Engineering A, 680 (IF-3.094). pp. 388-404.

Guguloth, K and Roy, Nilima (2023) Creep life estimation of reformer alloy using 0-projection method- A neuro fuzzy approach. International Journal of Pressure Vessels and Piping, 203 .

Guguloth, K and Roy, Nilima (2018) Study on the creep deformation behavior and characterization of 9Cr-1Mo-V-Nb steel at elevated temperatures. Materials Characterization, Volume 146, December 2018, Pages 279-298 (IF-3.220). pp. 279-298.

Guguloth, K and Sivaprasad, S and Chakrabarti, D and Tarafder, S (2014) Low-cyclic fatigue behavior of modified 9Cr-1Mo steel at elevated temperature. Materials Science and Engineering A, 604 (IF-2.409). pp. 196-206.

Guguloth, K and Swaminathan, J and Bagui, Sumanta and Ray, Ashok K (2012) Remnant Life Assessment and Microstructural Studies on Service Exposed Primary Reformer Tubes of a Catalytic Converter of an Ammonia Plant. High Temperature Materials Proceedings, 31 . pp. 759-767.

Guguloth, K and Swaminathan, J and Roy, Nilima and Ghosh, R N (2017) Uniaxial creep and stress relaxation behavior of modified 9Cr-1Mo steel. Materials Science and Engineering A- Structural Materials Properties Micro-structure and Processing, 684 (IF-3.094). pp. 683-696.

Guha, Avijit and Nayar, S (2014) Low-Temperature Biomimetic Synthesis of beta-Tricalcium Phosphate by Altering pH. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 44(6) (IF-0.518). pp. 789-792.

Guha, Avijit and Nayar, S and Thatoi, Hruayanath (2010) Microwave irradiation enhances kinetics of the biomimetic process of hydroxyapatite nanocomposites. Bioinspiration & Biomimetics, 5 (2). 024001.

Guha, Avijit and Singh, Sashi and Kumaresan, R and Nayar, S and Sinha, Arvind (2009) Mesenchymal cell response to nanosized biphasic calcium phosphate composites. Colloids and Surfaces B: Biointerfaces, 73 (1). pp. 146-151.

Guha, Avijit and Sinha, Arvind (2011) Surface Mineralization of Hydrogels Through Octacalcium Phosphate. International Journal of Applied Ceramic Technology , 8 (3). pp. 540-546.

Guha, B K and Gupte, P K and Nijhawan, B R (1961) Failure of boiler tube by differential aeration corrosion. NML Technical Journal, 3 (4). pp. 16-20.

Guha, B K and Kulkarni, M R and Bhatnagar, S S (1972) An investigation on the metallurgical characteristics of stainless steel safety razor blades. NML Technical Journal, 14 (3). pp. 105-107.

Guha, J P and Chakravarty, P (1967) An x-ray investigation on the formation of oxides of niobium. NML Technical Journal, 9 (4). pp. 15-17.

Gupta, J R and Kapoor, A N (1967) Melleabilisation characteristics of white cast iron containing copper under inert atmosphere. NML Technical Journal, 9 (2). pp. 26-31.

Gupta, K K and Bhattacharjee, S and Kar, S and Chakravarty, S and Thakur, P and Bhattacharyya, G and Srivastava, S C (2003) Mineral compositions of eight common spices. Communications in Soil Science and Plant Analysis, 34 (5-6). pp. 681-693.

Gupta, K K and Ghosh, Dolly and Bhagat, A N and Hait, Jhumki and Chakravarty, S and Ranganathan, S (1999) Determination of carbidic carbon in steels. Talanta, 49 (1). pp. 41-45.

Gupta, K K and Singhal, K M (1977) Heat resistant steels in steam turbine. NML Technical Journal, 19 (3-4). pp. 54-57.

Gupta, K N (1971) Effect of titanium, aluminium & other additions on the solidification & structure of steel ingots. NML Technical Journal, 13 (1). pp. 14-18.

Gupta, K N and Chatterjea, A B (1968) Distribution characteristics of burden in low shaft furnace. NML Technical Journal, 10 (2). pp. 7-14.

Gupta, K N and Padan, J S and Chatterjea, A B (1967) Evaluation of some properties of iron ore for blast furnace smelting. NML Technical Journal, 9 (3). pp. 15-19.

Gupta, M K and Banerjee, T (1962) Thermal and Electrical conductivity of copper manganese alloys. NML Technical Journal, 4 (4). pp. 12-16.

Gupta, M K and Kar, B C (1959) Spectrochemical analysis of aluminium alloys by oxide arc technique. NML Technical Journal, 1 (3). pp. 23-27.

Gupta, N and Bhattacharya, P (2023) Microwave-plasma induced one-step synthesis of Ni(PO3)2 nanosphere-loaded bio-waste derived N, P co-doped carbon for an asymmetric supercapacitor with prolonged life. Journal of Materials Chemistry C, 11(39) . pp. 13503-13517.

Gupta, N and Sahu, Ranjan K and Mishra, T and Bhattacharya, P (2022) Microwave-assisted rapid synthesis of titanium phosphate free phosphorus doped Ti3C2 MXene with boosted pseudocapacitance. Journal of Materials Chemistry A .

Gupta, P K (1965) Symposium on Micro-Metallurgy-The Role of Minute Additions to Ferrous and Non-Ferrous Metals and Alloys'-A Review. NML Technical Journal, 7 (2). pp. 4-9.

Gupta, P K and Kulkarni, M R (1962) Symposium on ferro alloy industry in India-A Review. NML Technical Journal, 4 (2). pp. 4-11.

Gupta, R C (2013) The utilisation of iron ore fines : Technical options and challenges. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 235-256.

Gupta, R C and Sant, B R (1973) Status of technology of biochemical leaching of low grade copper ores. NML Technical Journal, 15 (4). pp. 13-15.

Gupta, R D (1979) Super hard materials for erosion resistance-Status of indigenous development. NML Technical Journal, 21 (1-2). pp. 11-14.

Gupta, R D and Gupte, P K and Nijhawan, B R (1964) Production of low residual and soft iron. NML Technical Journal, 6 (4). pp. 4-11.

Gupta, R D and Gupte, P K and Nijhawan, B R (1965) Some laboratory scale trials on electro-slag melting. NML Technical Journal, 7 (3). pp. 7-14.

Gupta, R K and Mehrotra, S P and Gupta, Santosh K (2007) Evaluation and optimization of metal matrix composite strip produced by single roll continuous strip casting method. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 465 (1-2). pp. 116-123.

Gupta, R N and Das, A K and Nagahanumaiah, and Henal, S (2016) Pulse Electrocodeposited Ni–WC Composite Coating. Materials and Manufacturing Processes, 31(1) (IF-1.630). pp. 42-47.

Gupta, R N P and Rao, G N and Gupte, P K (1971) Chemical aspects of shell moulding resin and its use as a binder. NML Technical Journal, 13 (4). pp. 104-108.

Gupta, S K and Kumar, Sanjeev and Patwari, Anand Ganvir and Chatterjee, A and Ghosh, Somnath (2016) Control of sulphur and minimisation of centre line segregation for Rail Steel. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 243-250.

Gupta, S K and Pandey, K N and Kumar, R (2018) Experimental modelling and genetic algorithm-based optimisation of friction stir welding process parameters for joining of dissimilar AA5083-O and AA6063-T6 aluminium alloys. International Journal of Materials & Product Technology, 56(3) (IF-0.802). pp. 253-270.

Gupta, S K and Pandey, K N and Kumar, Rajneesh (2018) Artificial intelligence-based modelling and multi-objective optimization of friction stir welding of dissimilar AA5083-O and AA6063-T6 aluminium alloys. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(4) (IF-1.625). pp. 333-342.

Gupta, S K and Pandey, K N and Kumar, Rajneesh (2018) Multi-objective optimization of friction stir welding process parameters for joining of dissimilar AA5083/AA6063 aluminum alloys using hybrid approach. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(4) (IF-1.625). pp. 343-353.

Gupta, Siddhi and Goswami, Sudipta and Sinha, Arvind (2012) A combined effect of freeze--thaw cycles and polymer concentration on the structure and mechanical properties of transparent PVA gels. Biomedical Materials, 7 (1). 015006-1.

Gupta, Siddhi and Greeshma, T and Basu, Bikramjit and Goswami, Sudipta and Sinha, Arvind (2013) Stiffness-and wettability-dependent myoblast cell compa-tibility of transparent poly(vinyl alcohol) hydrogels. Journal of Biomedical Materials Research Part B-Applied, 101B (IF-2.834). pp. 346-354.

Gupta, Siddhi and Pramanick, A K and Kailath, A J and Mishra, T and Guha, Avijit and Nayar, S and Sinha, Arvind (2009) Composition dependent structural modulations in transparent poly(vinyl alcohol) hydrogels. Colloids and Surfaces B: Biointerfaces, 74 (1). pp. 186-190.

Gupta, Siddhi and Sinha, Satish and Sinha, Arvind (2010) Composition dependent mechanical response of transparent poly(vinyl alcohol) hydrogels. Colloids and Surfaces B: Biointerfaces, 78 (1). pp. 115-119.

Gupta, Siddhi and Webster, T J and Sinha, Arvind (2020) Correction to: Evolution of PVA gels prepared without crosslinking agents as a cell adhesive surface. Gupta S, Webster TJ, Sinha A. J Mater Sci Mater Med. 2020 Jul 21;31(8):63. doi: 10.1007/s10856-020-06399-1. PMID: 32696134. Journal of Materials Science - Materials in Medicine, 31(8) (IF-2.489). p. 63.

Gupta, Siddhi and Webster, T J and Sinha, Arvind (2011) Evolution of PVA gels prepared without crosslinking agents as a cell adhesive surface. Journal of Materials Science:Materials in Medicine, 22 (7). pp. 1763-1774.

Gupta, T K S P and Nasar, A and Shamsuddin, M and Ramachandrarao, P (1994) Thermodynamic investigations of liquid-Te-saturated CdTe—ZnTe solid solutions. Thermochimica Acta, 247 (2). pp. 415-429.

Gupte, P K (1977) Roundup on research in foundry and metal solidification at Indias National-Metallurgical-Laboratory. International cast metals journal, 2 (4). pp. 9-12.

Gurevich, Y L and Teremova, M I and Bondarenko, G N and Kislan, S L and Abhilash, (2015) Bio-chemical leaching of kaolinite-hematite-boehmite type bauxite ore. Indian Journal of Chemical Technology, 22/5 (IF-0.655). pp. 248-252.

Guria, A and Mandal, G K and Hodgson, Peter and Beynon, John H and Ghosh Chowdhury, S (2015) Effect of Twinning on Microstructural Evolution During Dynamic Recrystallisation of Hot Deformed As-Cast Austenitic Stainless Steel. Metallurgical and Materials Transactions A, 46(10) . pp. 4423-4428.

Guria, Chandan and Varma, Mohan and Mehrotra, S P and Gupta, Santosh K (2006) Simultaneous optimization of the performance of flotation circuits and their simplification using the jumping gene adaptations of genetic algorithm-II: More complex problems. International Journal of Mineral Processing, 79 (3). pp. 149-166.

Guria, Chandan and Verma, Mohan and Gupta, Santosh K and Mehrotra, S P (2005) Simultaneous optimization of the performance of flotation circuits and their simplification using the jumping gene adaptations of genetic algorithm. International Journal of Mineral Processing, 77 (3). pp. 165-185.

Guria, Chandan and Verma, Mohan and Mehrotra, S P and Gupta, Santosh K (2005) Multi-objective optimal synthesis and design of froth flotation circuits for mineral Processing, using the jumping gene adaptation of genetic algorithm. Industrial & Engineering Chemistry Research, 44 (8). pp. 2621-2633.

Gutpa, K K and Bhattacharjee, S and Sekhar, K C (2001) Determination of Gold by Inductively Coupled Plasma Optical Emission Spectrometry. Geological Survey of India, 58 (Suppl). pp. 487-492.

Haase, C and Ghosh Chowdhury, S and La, Barrales-Mora and Molodov, D A and Gottstein, G (2013) On the Relation of Microstructure and Texture Evolution in an Austenitic Fe-28Mn-0.28C TWIP Steel during Cold Rolling. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 44A (IF-1.738). pp. 911-922.

Hait, Jhumki and Jana, R K and Kumar, Vinay and Sanyal, S K (2002) Some studies on sulfuric acid leaching of anode slime with additives. Industrial & Engineering Chemistry Research, 41 (25). pp. 6593-6599.

Hait, Jhumki and Jana, R K and Sanyal, S K (2004) Mineralogical characteristics of copper electrorefining anode slime and its leached residues. Industrial & Engineering Chemistry Research, 43 (9). pp. 2079-2087.

Hait, Jhumki and Jana, R K and Sanyal, S K (2009) Processing of copper electrorefining anode slime: a review. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 118 (4). pp. 240-252.

Hait, Jhumki and Ranganathan, S and Singh, R J and Premchand, (1997) An Investigation on the beneficiation of a low-grade nickel ore by magnetic separation after partial reduction. NML Technical Journal, 39 (3). pp. 167-175.

Haldar, A and Huang, X and Leffers, T and Hansen, N and Ray, R K (2004) Grain orientation dependence of microstructures in a warm rolled IF steel. Acta Materialia, 52 (18). pp. 5405-5418.

Haldar, R K and Lahiri, A K (1972) Observations on High Temperature Oxidation Behaviour of Some Fe-Cr-Al alloys. NML Technical Journal, 14 (3). pp. 108-109.

Halder, B and Prakash, Ved (1962) Interface energy studies of some copper-nickel alloys containing a liquid phase. NML Technical Journal, 4 (3). pp. 13-17.

Halder, N and Anand, S and Datta, S and Das, A (2023) On Fabrication of Inconel 718 Slab by Wire Arc Additive Manufacturing: Study of Built Microstructure and Mechanical Properties. Arabian Journal for Science & Technology .

Halder, S and Ram, S and Ramachandrarao, P and Banerjee, H D (1995) Synthesis of high-energy-density Pr2Fe14-xCoxB, x<=3, magnets for practical applications. Bulletin of Materials Science, 18 (8). pp. 963-974.

Hamada, A S and Sahu, Puspendu and Ghosh Chowdhury, S and Karjalainen, L P and Levoska, J and Oittinen, T (2008) Kinetics of the γ → ε Martensitic Transformation in Fine-Grained Fe-26Mn-0.14C Austenitic Steel. Metallurgical and Materials Transactions A, 39 (2). pp. 462-465.

Hargave, R V and Dasgupta, S P and Rao, M R K (1976) Blast furnace slags-A study of chemical and mineralogical composition and utilization in cement industry. NML Technical Journal, 18 (2). pp. 15-20.

Hargave, R V and Rao, M R K (1979) Mineralogy and liquidus behaviour of Indian blast furnace slags. NML Technical Journal, 21 (3-4). pp. 15-20.

Harmain, G A (2005) An investigation on single overload fatigue crack growth retardation, Part-2(Crack closure decomposition). Journal of Metallurgy and Materials Science, 47 (4). pp. 189-197.

Harmain, G A (2005) An investigation on single overload fatigue crack growth retardation, Part-I (Plasticity zone interactions). Journal of Metallurgy and Materials Science, 47 (3). pp. 129-140.

Harmain, G A (2005) A numerical investigation on constant amplitude loading. Journal of Metallurgy and Materials Science, 47 (2). pp. 103-117.

Harsh Raj, and Jha, S K and Paswan, Dayanand (2016) Optimization of Process Parameter for Smelting and Reduction of Ferrochrome. International Journal of Engineering Research & Technology, 5(10) .

Hart , D H (1960) The Role of Pilot Plant Investigation in the Development of Updraught Sintering of Broken Hill Lead Concentrate. NML Technical Journal, 2 (1). pp. 52-59.

Hasan, Sk Md and Ghosh, M and Chakrabarti, D and Singh, S B (2020) Development of continuously cooled low-carbon, low-alloy, high strength carbide-free bainitic rail steels. Materials Science & Engineering A, 771 (IF-4.081). p. 138590.

Hatami, Mahdi Kazemi and Barsoum, Zuheir (2010) Fatigue assessment of cruciform joints welded in different positions. Journal of Metallurgy and Materials Science, 52 (1). pp. 87-102.

Hauser, M and Wendler, M and Ghosh Chowdhury, S and Weiss, A and Mola, J (2015) Quantification of deformation induced alpha '-martensite in Fe-19Cr-3Mn-4Ni-0.15C-0.15N austenitic steel by in situ magnetic measurements. Materials Science and Technology, 31(12) (IF-1.909). pp. 1473-1478.

Haxhiaj, A and Haxhiaj, E (2010) The optimization of the quantity of coke and agglomerate in lead production in 'Water-jacket' furnace. Journal of Metallurgy and Materials Science, 52 (3). pp. 257-265.

Haxhiaj, A and Rama, M and Krasniqi, N and Haxhiaj, E (2011) The management of the melting process of electrical furnaces in Drenas. Journal of Metallurgy and Materials Science, 53 (3). pp. 253-260.

Hazra, A and Hossain, S M and Pramanick, A K and Ray, M (2017) Gold-silver nanostructures: Plasmon-plasmon interaction. Vacuum, 146 (IF- 1.530). pp. 437-443.

Hazra, B and Varma, Atul K and Bandyopadhyay, A K and Chakravarty, S and Buragohain, J and Samad, S K and Prasad, A K (2016) FTIR, XRF, XRD and SEM characteristics of Permian shales, India. Journal of Natural Gas Science and Engineering, 32 (IF-2.718). pp. 239-255.

Henry, G and Plateau, J (1963) Some Observations on a Cr-Mn-N Stainless Steel. NML Technical Journal, 5 (2). pp. 25-32.

Herbert, M A and Das, Goutam and Maiti, R and Chakraborty, M and Mitra, R (2010) Tensile properties of cast and mushy state rolled Al-4.5Cu alloy and in situ Al4.5Cu-5TiB(2) composite. International Journal of Cast Metals Research, The, 23 (4). pp. 216-224.

Hirabayi , S S and Prakrathi , S (2019) Impact and wear resistance of Al-7072 MMCs reinforced with SiC and Al2 O3. Journal of Metallurgy and Materials Science, 61(3) . pp. 143-149.

Hiteshkumar, Patel and Jyoti, Menghani (2012) Wear characteristics of unalloyed and alloyed LM25- Aluminium casting. Journal of Metallurgy and Materials Science, 54(2) . pp. 131-135.

Hoang, L L and Jeong, Jinki and Lee, Jae-chun and Pandey, B D and Yoo, Jae-Min and Trung, H H (2011) Hydrometallurgical Process for Copper Recovery from Waste Printed Circuit Boards (PCBs). Mineral Processing and Extractive Metallurgy Review, 32 (2). pp. 90-104.

Hoff, Dan and Sheikh, Lubna and Bhattacharya, S and Nayar, S and Webster, T J (2013) Comparison study of ferrofluid and powder iron oxide nanoparticle permeability across the blood-brain barrier. International Journal of Nanomedicine, 8(1) (IF-3.463). pp. 703-710.

Holmes, G M (1962) Some Aspects of the Sampling and Analysis of Ferro Alloys. NML Technical Journal, 4 (1). pp. 33-40.

Hore, S and Das, S K (2019) Computer simulation of microstructure evolution in strip-cast silicon steel with cube and fibre texture. Philosophical Magazine (IF-1.855). pp. 2841-2857.

Hore, S and Das, S K and Banerjee, S and Mukherjee, S (2016) An adaptive neuro-fuzzy inference system-based modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking , 44(9) (IF-0.985). pp. 1-10.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2017) An adaptive neuro-fuzzy inference systembased modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking, 44(9) (IF-0.985). pp. 656-665.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2015) Computational modelling of static recrystallization and two dimensional microstructure evolution during hot strip rolling of advanced high strength steel. Journal of Manufacturing Processes, 17 (IF-1.528). pp. 78-87.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2012) Monte Carlo simulation of influence of reheat temperature on austenite grain growth in C‐Mn steel. Materials Science and Technology, 28(6) (IF-0.751). pp. 711-718.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2013) A multiscale coupled Monte Carlo model to characterize microstructure evolution during hot rolling of Mo-TRIP steel. Acta Materialia, 61 (IF-3.941). pp. 7251-7259.

Hore, S and Das, Suchandan K and Godiwalla, K M and Bhattacharyya, K K and Singh, Ratnakar (2008) Performance characterization of water-only Cyclone for processing high ash Indian coal. Metals Materials and Processes, 20 (4). pp. 265-280.

Hore, S and Das, Suchandan K and Humane, M M and Peethala, A K (2019) Neural Network Modelling to Characterize Steel Continuous Casting Process Parameters and Prediction of Casting Defects. Transactions of the Indian Institute of Metals (IF-1.176). pp. 3015-3025.

Hore, S and Das, Suchandan K and Singh, Ratnakar and Bhattacharyya, K K (2012) Efficiency Study of a Water-Only Cyclone by Experimental and Data Modeling Techniques when Cleaning Indian Coal Fines. International Journal of Coal Preparation and Utilization, 32 (4). pp. 193-209.

Hore, S and Ghosh, R N (2011) Computer simulation of the high temperature creep behaviour of Cr–Mo steels. Materials Science and Engineering A, 528 (19-20). pp. 6095-6102.

Humane, M M and Minj, R K and Paretkar, R K and Peshwe, D R (2010) Effect of cold rolling and mode of annealing on textures, mechanical properties and formability limit diagrams in interstitial free steel sheets. Transactions of the Indian Institute of Metals, 63 (6). pp. 867-880.

Humane, M M and Minj, R K and Peshwe, D R and Paretkar, R K (2010) Effect of two step cold rolling — continuous annealing on micro-structures, textures and mechanical properties in IF and IF-HS steel sheets. Transactions of the Indian Institute of Metals, 63 (1). pp. 21-30.

Humane, M M and Minj, R K and Peshwe, D R and Paretkar, R K (2011) Texture and Formability of One-Step and Two-Step Cold-Rolled and Annealed Interstitial Free High-Strength Steel Sheets. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 42A (6). pp. 1692-1708.

Humane, M M and Peshwe, D R and Paretkar, R K (2009) Optimizing Cold Rolling and Mode of Annealing of Interstitial-Free High-Strength Steel Sheets. Steel Research International, 80 (10). pp. 785-792.

Humane, M M and Thool, K S and Minz, R K and Kestens, L A I (2015) Microstructures and Textures of Hot Rolled and Hot Rolled-Normalized 2.9 % Silicon Steel Sheets. Transactions of the Indian Institute of Metals, 68(3) (IF- 0.62). pp. 371-381.

Humane, M M and Vaish, A K and Swaminathan, J and Ravi Kumar, B and De, P K and Peshwe, D R and Paretkar, R K (2006) Comparison of hot rolled textures in different grades of high formable steels. Steel Research International, 77 (6). pp. 445-449.

Hung, Nguyen Trong and Le, Ba Thuan and Tran, Chi Thanh and Watanabe, Masayuki and Hoang, Nhuan and Do, Van Khoai and Nguyen, Thanh Thuy and Nguyen, Van Tung and Aoyagi, Noboru and Doan, Thi Thu Tra and Nguyen, Trung Minh and Jha, Manis K and Lee, Jin-Young and Jyothi, Rajesh Kumar (2020) Optimization of sulfuric acid leaching of a Vietnamese rare earth concentrate. Hydrometallurgy, 191 . p. 105195.

Hung, Nguyen Trong and Thuan, Le Ba and Thanhb, Tran Chi and Jha, Manis K (2020) Optimization of sulfuric acid leaching of a Vietnamese rare earth concentrat. Hydrometallurgy .

Hung, Nguyen Trong and Thuan, Le Ba and Thanh, Tran Chi and Watanabe, Masayuki and Khoai, Do Van and Thuy, Nguyen Thanh and Nhuan, Hoang and Minh, Pham Quang and Mai, Tran Hoang and Tung , Nguyen Van and Tra, Doan Thi Thu and Jha, Manis K and Lee, Jin-Young and Kumar, J Rajesh (2020) Separation of thorium and uranium from xenotime leach solutions by solvent extraction using primary and tertiary amines. Hydrometallurgy, 198 (IF-3.338). 105506 .

Hung Ha, Vinh and Lee, Jae-chun and Huyunh, Trung Hai and Jeong, Jinki and Pandey, B D (2014) Optimizing the thiosulfate leaching of gold from printed circuit boards of discarded mobile phone. Hydrometallurgy, 149 (IF-2.224). pp. 118-126.

Husain, M M and Ghosh, M (2013) Inhibition of intermetallic formation during diffusion bonding of high-carbon steel. International Journal of Advanced Manufacturing Technology, 66 (9-12) . pp. 1871-1877.

Husain, M M and Ghosh, M and Sarkar, R and Pal, T K and Prabhu, N (2018) Conventional and in situ tensile test of friction stir welded steel – Optimization of processing parameters. Materialwiss. Werkstofftech, 49 (IF-0.393). pp. 991-1005.

Husain, M M and Meena, L K and Ghosh, M and Prabhu, N (2021) Corrosion at the Weld Nugget of the Friction-Stir-Welded Medium Strength Steel: Effect of Microstructure. Metallurgical and Materials Transactions A .

Husain, M M and Sarkar, R and Pal, T K and Prabhu, N and Ghosh, M (2015) Friction Stir Welding of Steel: Heat Input, Microstructure, and Mechanical Property Co-relation. Journal of Materials Engineering and Performance, 24 (IF-0.998). pp. 3673-3683.

Husain, M M and Sarkar, R and Pal, T K and Ghosh, M and Prabhu, N (2017) Quantification of Microtexture at Weld Nugget of Friction Stir-Welded Carbon Steel. Journal of Materials Engineering and Performance , 26(5) (IF-1.331). pp. 2047-2056.

Husain, Md Murtuja and Halder, N and Meena, L K and Ghosh, M (2023) Evaluation of Microstructure, Mechanical Properties, Wear Resistance and Corrosion Behaviour of Friction Stir‑Processed AZ31B‑H24 Magnesium Alloy. Metallography, Microstructure & analysis .

Hussain, R R and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N (2022) Role of phosphorus as micro alloying element and its effect on corrosion characteristics of steel rebars in concrete environment. Scientific Reports, 12(1) .

Hussain, R R and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, J K and Singh, D D N (2016) Accelerated Rusting of Reinforcing Bars: The Role of Manganese Alloying in Concrete Reinforcement Steel Bars. ACI Materials Journal, 113(5) (IF-1.183). pp. 579-588.

Hussain, R R and Singh, J K and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Bhattacharya, C and Pathania, R. S. and Singh, D D N (2018) Effect of Reinforcing Bar Microstructure on Passive Film Exposed to Simulated Concrete Pore Solution. Aci materials journal, 115(2) . pp. 181-190.

Hussain, Raja Rizwan and Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Singh, D D N (2020) Corrosion characteristics of vanadium micro-alloyed steel reinforcement bars exposed in concrete environments and industrially polluted atmosphere. Cement and Concrete Composites, 113(4) .

Hussain, Raja Rizwan and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N (2014) Time-dependent variation of the electrochemical impedance for thermo-mechanically treated versus plain low alloy steel rebars in contact with simulated concrete pore solution. Construction and Building Materials, 73 (IF-2.265). pp. 283-288.

Imai, Y and Izumiyama, M and Tsuchiya, M (1965) On the transformation of austentite to martensite and tempering process of martensite in iron-nitrogen system. NML Technical Journal, 7 (1). pp. 49-53.

Indulal, C R and Vaidyan, A V and Kumar, G Sajeev (2012) The ion exchange properties of nanosized cerium molybdo iodate and cerium phospho iodate. Journal of Metallurgy and Materials Science, 54(4) . pp. 299-302.

Jackson, A (1961) The Ajax Furnace and Process. NML Technical Journal, 3 (2). pp. 7-12.

Jacob, K T and Srikanth, S (1987) Gibbs energy of formation of Au2Na = Energie de Gibbs de formation de Au2Na. Scripta Metallurgica, 21 (12). pp. 1649-1654.

Jacob, K T and Srikanth, S (1990) Physical Chemistry of the Reduction of Calcium Oxide with Aluminum in Vacuum. High Temperature Materials and Processes, 9 (2-4). 77- .

Jacob, K T and Srikanth, S (1988) Use of Metastable Equilibria for determination of Gibbs Energy of Solids. Journal of Materials Research, 3 (4). pp. 687-693.

Jacob, K T and Srikanth, S and Iyengar, G N K (1986) Phase relations and activities in the Co-Ni-O system at 1373 K. Bulletin of Materials Science, 8 (1). pp. 71-79.

Jacob, K T and Srikanth, S and Waseda, (1988) Vapour Composition and Activities in Mg-Zn Liquid Alloy at 923 K. Thermochimica Acta, 130 . pp. 193-203.

Jacob, K T and Srikanth, S and Waseda, Y (1988) Activities, Concentration Fluctuations and Complexing in Liquid Ca–Al Alloys. Transactions of the Japan Institute of Metals, 29 (1). pp. 50-59.

Jacomet, P (1966) The recent developments of aluminium conductors in France in public distribution and industrial plants. NML Technical Journal, 8 (1). pp. 31-38.

Jadayil, Anu and Wisam, M (2011) Solidification time effects on surface and subsurface aluminum casting defects. Journal of Metallurgy and Materials Science,, 53 (1). pp. 41-54.

Jain, Ishant and Singh, R K and Mazumdar, D (2015) Measurements of Some Thermal Properties of Steel-Refractory Systems and Heat Losses from Steelmaking Furnaces. Transactions of the Indian Institute of Metals, 68(3) (IF-0.62). pp. 383-392.

Jain, Jitendra and Soni, S L and Sharma, Dilip (2010) Determination of wear rate of steel in high pressure and temperature zone for prediction of balance life of autofretagged tubes. Journal of Metallurgy and Materials Science, 52 (2). pp. 181-187.

Jain, Vipul and Kumar, Piyush and Bagui, Sumanta and Halder, C and Patra, Sudipta and Ghosh, Abhijit (2023) A comprehensive study on the through-process Goss texture evolution in Fe-3.78 wt.%Si grain-oriented electrical steel. Materials Chemistry and Physics, 309 .

James, J and Rao, MS (1992) Rice-Husk-Ash Cement - A Review. Journal of Scientific & Industrial Research , 51 (5). pp. 383-393.

Jamesh, M and Sankara Narayanan, T S N and Chu, P K and Park, Song and Lee, Min Ho (2013) Effect of Surface Mechanical Attrition Treatment of Titanium Using Alumina Balls: Surface Roughness, Contact Angle and Apatite Forming Ability. Frontiers of Materials Science, 7(3) . pp. 285-294.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2011) Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution – Long term evaluation by EIS. Corrosion Science, 53 . pp. 645-654.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Effect of Thermal Oxidation on Corrosion Resistance of Commercially Pure Titanium in Acid Medium. Journal of Materials Engineering and Performance, 21 (6). pp. 900-906.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Electrodeposition of hydroxyapatite coating on magnesium for biomedical applications. Journal of Coatings Technology and Research, 9 (4). pp. 495-502.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N and Chu, P K (2013) Effect of thermal oxidation on the corrosion resistance of Ti6Al4V alloy in hydrochloric and nitric acid medium. Materials and Corrosion / Werkstoffe und Korrosion, 64(10) (IF-1.173). pp. 902-907.

Jana, Arpita and Devi, P S and Mitra, A and Bandyopadhyay, N R (2013) Synthesis of blue emitting ZnO nanorods exhibiting room temperature ferromagnetism. Materials Chemistry and Physics, 139(2-3) (IF-2.072). pp. 431-436.

Jana, B and Saha, B and Shetty, Kishora and Yadav, J S and Gupta, B (2000) Airworthiness certification of titanium alloys for aeronautical applications. Journal of Metallurgy and materials Science, 42 (3). pp. 151-158.

Jana, R K (1993) Leaching of sea nodules in acidic chloride-sulfide media. Transactions of the Institution of Mining and Metallurgy Section C-Mineral Processing and Extractive, 102 ( ). C191-C194.

Jana, R K and Akerkar, D D (1989) Studies of the metal-ammonia-carbon dioxide-water system in extraction metallurgy of polymetallic sea nodules. Hydrometallurgy, 22 (3). pp. 363-378.

Jana, R K and Pandey, B D and Kumar , Vinay and Saha, A K and Akerkar, D D (1987) Treatment of Ammoniacal Leach Liquor from Reduction Roast-Leach Route of Sea Nodules by Solvent Extraction. Transactions of the Indian Institute of Metals, 40 (6). pp. 479-488.

Jana, R K and Pandey, B D and Premchand, (1999) Ammoniacal leaching of roast reduced deep-sea manganese nodules. Hydrometallurgy, 53 (1). pp. 45-56.

Jana, R K and Singh, D D N and Roy, S K (1995) Alcohol-modified hydrochloric acid leaching of sea nodules. Hydrometallurgy, 38 (3). pp. 289-298.

Jana, R K and Singh, D D N and Roy, S K (1996) Direct electrowinning of valuable metals from sea nodules using aqueous chloride bath. Transactions of the indian institute of metals, 49 (6). pp. 761-767.

Jana, R K and Singh, D D N and Roy, S K (1993) Electrochlorination of sea nodules to recover copper, nickel and cobalt. Hydrometallurgy, 32 (1). pp. 21-38.

Jana, R K and Singh, D D N and Roy, S K (1993) Hydrochloric-acid leaching of sea nodules with methanol and ethanol addition. Materials Transactions JIM, 34 (7). pp. 593-598.

Jana, R K and Singh, D D N and Roy, S K (1997) Some physico-chemical characteristics of central Indian Ocean nodules and their effects on extractive metallurgical schemes. NML Technical Journal, 39 (2). pp. 93-103.

Jana, R K and Singh, D D N and Roy , S K (1994) Electrowinning of metals using buffered sodium-chloride electrolyte during electrochlorination of sea nodules. Hydrometallurgy, 36 (3). pp. 295-314.

Jana, R K and Srikanth, S and Pandey, B D and Kumar, Vinay and Premchand, (1999) Processing of Deep-Sea Manganese Nodules at NML for Recovery of Copper, Nickel & Cobalt. Metals Materials and Processes, 11 (2). pp. 133-144.

Jana , R K and Murthy, D S R and Nayak, A K and Mahanty, M S and Tiwary, S K and Akerkar, D D (1990) Leaching of roast-reduced polymetallic sea nodules to optimize the recoveries of copper, nickel and cobalt. International Journal of Mineral Processing, 30 (1-2). pp. 127-141.

Jariwala, Deep and Chandra , Kaushik and Cao, Anyuan and Saikat , Talapatra and Shima, Mutshihiro and Anuhya, D and Prasad, V V S and Ribeiro, R and Canfield, P C and Wu, D and Srivastava , Anchal and Mandal, R K and Pramanick, A K and Vajtai , Robert and Ajayan , Pulickel M and Sastry, G V S (2012) Growth of Carbon Nanotubes on Quasicrystalline Alloys. The Banaras Metallurgist, 17 . pp. 57-67.

Javoronkov, V A (1962) The Development of Rolling Mills in the USSR. NML Technical Journal, 4 (3). pp. 22-32.

Jayabal, S and Natarajan, U (2010) Effect of fibre length and fibre content on the mechanical properties of coir fiber/polyester composites. Journal of Metallurgy and Materials Science, 52 (4). pp. 341-350.

Jayaraj, J and Srinivasan, A and Arunchandran, C and Rajinikanth, V (2023) Corrosion and in vitro characteristics of cerium phosphate-based chemical conversion coating on AZ31 magnesium alloy. Applied Surface Science, 644 .

Jegannathan, S and Arumugam, T K and Sankara Narayanan, T S N and Ravichandran, K (2009) Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: Cathodic vs. anodic. Progress in Organic Coatings, 65 (2). pp. 229-236.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Evaluation of the corrosion resistance of phosphate coatings obtained by anodic electrochemical treatment. Progress in Organic Coatings, 57 (4). pp. 392-399.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Formation of zinc phosphate coating by anodic electrochemical treatment. Surface and Coatings Technology, 200 (20-21). pp. 6014-6021.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Formation of zinc–zinc phosphate composite coatings by cathodic electrochemical treatment. Surface and Coatings Technology, 200 (12-13). pp. 4117-4126.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2005) Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests. Electrochimica Acta, 51 (2). pp. 247-256.

Jena, B K and Sahu, S C and Satpati, B and Sahu, Ranjan K and Behera, D and Mohanty, S (2011) A facile approach for morphosynthesis of Pd nanoelectrocatalysts. Chemical Communications, 47 (13). pp. 3796-3798.

Jena, P S M and Pradhan, S K and Tripathy, S and Mahato, B and Fernando, C and Paulose, N and Sahu, J K (2021) Evolution of geometrically necessary dislocation at the gamma-gamma ' interface and its effect on tensile deformation behaviour of disk super alloy. Materials Science & Engineering A-Structural materials properties microstructure & processing, 807 .

Jena, P S M and Rai, R K and Roy, P K and Sahu, J K (2017) Role of internal oxidation and iron penta carbonyl formation on creep life of 9Cr-1Mo steel. Materials at high temperatures, 34(4) (IF-0.0802). pp. 239-249.

Jena, P S M and Rai, R K and Sahu, J K (2017) Improvement of toughness of high chromium white cast iron: duplex ferritic-austenitic matrix. Materials Science and Technology, 34(3) (IF-2.764). pp. 299-304.

Jena, P S M and Rai, R K and Sahu, J K (2018) Improvement of toughness of high chromium white cast iron: duplex ferritic-austenitic matrix. Journal Materials Science and Technology, 34(4) (IF-5.040). pp. 299-304.

Jena, P S M and Sahu, J K and Rai, R K and Das, S K and Singh, R K (2018) Influence of duplex ferritic-austenitic matrix on two body abrasive wear behaviour of high chromium white cast iron. Wear, 406 (IF-2.531). pp. 140-148.

Jena, P S M and Singh, R K and Mahanta, L and Paswan, S and Sahu, J K (2018) Low cycle fatigue behaviour of nickel base superalloy IN 740H at 760° C: Influence of fireside corrosion atmosphere. International Journal of Fatigue, 116 (IF-3.673). pp. 623-633.

Jena, P S M and Tripathy, S and Mahato, B and Paulose, N and Fernando, D.C and Sahu, J K (2023) Role of void nucleation at primary-gamma'/gamma interface on strain softening of nickel-base superalloy 720Li. Journal of Alloys and Compounds, 958 .

Jennings, R F and Frankau, A M (1959) Blast Furnace Burden Preparation with Reference to High Ash Coke. NML Technical Journal, 1 (1). pp. 80-87.

Jha, Amrita Kumari and Jha, Manis K and Kumari, Anjan and Sahu, S K and Kumar, Vinay and Pandey, B D (2013) Selective separation and recovery of cobalt from leach liquor of discarded Li-ion batteries using thiophosphinic extractant. Separation and Purification Technology, 104 (IF-2.921). pp. 160-166.

Jha, Amrita Kumari and Kumari, Archana and Choubey, Pankaj K and Kumar, Vinay and Jha, Manis K (2011) Waste lithium ion batteries - An alternative resource to recover lithium and cobalt. Journal of Metallurgy and Materials Science, 53 (3). pp. 225-231.

Jha, Animesh and Srikanth, S (2014) Measurement of non-isothermal oxygen potentials in a Cu–Fe–Ca–S–O liquid during reduction of chalcopyrite in lime and carbon mixtures. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123(1) (IF-0.690). pp. 21-28.

Jha, Gaurav and Soren, S and Mehta, K D (2023) Assessment of the internal chemistry nexus of coke and biomass-based sinters. Sadhana-Academy Proceedings in Engineering Sciences, 48(4) .

Jha, Gaurav and Soren, S and Mehta, K D (2020) Life cycle assessment of sintering process for carbon footprint and cost reduction: A comparative study for coke and biomass-derived sintering process. Journal of Cleaner Production, 259 (IF-7.246). pp. 120899-1.

Jha, Gaurav and Soren, S and Mehta, K D (2020) Partial substitution of coke breeze with biomass and charcoal in metallurgical sintering. Fuel, 278 (IF-5.578). p. 118350.

Jha, Manis K (2022) Business opportunities to reclaim metals by urban mining. Journal of Metallurgy and Materials Science .

Jha, Manis K and Choubey, Pankaj K and Dinkar, Om Shankar and Panda, Rekha and Jyothi, Rajesh Kumar and Yoo, Kyoungkeun and Park, Ilhwan (2022) Recovery of Rare Earth Metals (REMs) from Nickel Metal Hydride Batteries of Electric Vehicles. Minerals, 12(1) .

Jha, Manis K and Choubey, Pankaj K and Dinkar, Om Shankar and Panda, Rekha and Kumar, J Rajesh and Yoo, Kyoungkeun and Park, Ilhwan (2021) Recovery of Rare Earth Metals (REMs) from Nickel Metal Hydride Batteries of Electric Vehicles. Minerals .

Jha, Manis K and Choubey, Pankaj K and Jha, Amrita Kumari and Kumari, Archana and Lee, Jae-chun and Kumar, Vinay and Jeong, Jinki (2012) Leaching studies for tin recovery from waste e-scrap. Waste Management, 32(10) (IF-2.428). pp. 1919-1925.

Jha, Manis K and Gupta, Divika and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2014) Solvent extraction of copper, zinc, cadmium and nickel from sulfate solution in mixer settler unit (MSU). Separation and Purification Technology, 122 (IF-3.065). pp. 119-127.

Jha, Manis K and Gupta, Divika and Lee, Jae-Chun and Kumar, Vinay and Jeong, Jinki (2014) Solvent extraction of platinum using amine based extractants in different solutions: A review. Hydrometallurgy, 142 (IF-2.224). pp. 60-69.

Jha, Manis K and Kumar, Vinay (2005) Recovery of zinc from aqueous solutions by ion exchange process - A review. Journal of Metallurgy and Materials Science, 47 (3). pp. 119-128.

Jha, Manis K and Kumar, Vinay and Bagchi, D and Singh, R J (2007) Processing of rayon waste effluent for the recovery of zinc and separation of calcium using thiophosphinic extractant. Journal of Hazardous Materials, 145 (1-2). pp. 221-226.

Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Review on solvent extraction of cadmium from various solutions. Hydrometallurgy, 111-112 (IF-2.027). pp. 1-9.

Jha, Manis K and Kumar, Vinay and Maharaj, L and Singh, R J (2005) Extraction and separation of Zn and Ca from solution using thiophosphinic extractant. Journal of Metallurgy and Materials Science, 47 (2). pp. 71-83.

Jha, Manis K and Kumar, Vinay and Maharaj, L and Singh, R J (2004) Studies on leaching and recycling of Zinc from rayon waste sludge. Industrial & Engineering Chemistry Research, 43 (3). pp. 1284-1295.

Jha, Manis K and Kumar, Vinay and Singh, R J (2001) Review of hydrometallurgical recovery of zinc from industrial wastes. Resources, Conservation and Recycling, 33 (1). pp. 1-22.

Jha, Manis K and Kumar, Vinay and Singh, R J (2002) Solvent extraction of zinc from chloride solutions. Solvent Extraction and Ion Exchange , 20 (3). pp. 389-405.

Jha, Manis K and Kumari, Archana and Choubey, Pankaj K (2010) E-waste recycling: alternative metal resources. Mineral and Metal Review (5). pp. 50-53.

Jha, Manis K and Kumari, Archana and Choubey, Pankaj K and Lee , Jae-chun and Kumar, Vinay and Jeong, Jinki (2012) Leaching of lead from solder material of waste printed circuit boards (PCBs). Hydrometallurgy, 121–124 (IF-2.027). pp. 28-34.

Jha, Manis K and Kumari, Archana and Panda, Rekha and Kumar, J Rajesh and Yoo, Kyoungkeun and Lee, J Y (2016) Review on hydrometallurgical recovery of rare earth metals. Hydrometallurgy, 165 (IF-2.605). 2-26 .

Jha, Manis K and Kumari , Anjan and Jha, Amrita Kumari and Kumar, Vinay and Hait, Jhumki and Pandey, B D (2013) Recovery of lithium and cobalt from waste lithium ion batteries of mobile phone. Waste Management, 33(9) (IF-2.485). pp. 1890-1897.

Jha, Manis K and Kumari , Archana and Panda, Rekha and Jyothi , Rajesh Kumar and Yoo, Kyoungkeun and Lee, Jin-Young (2016) Review on hydrometallurgical recovery of rare earth metals. Hydrometallurgy, 165/1 .

Jha, Manis K and Lee, Jae-chun and Kim, Min-seuk and Jeong, Jinki and Kim, Byung-Su and Kumar, Vinay (2013) Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review. Hydrometallurgy, 133 (IF-2.027). pp. 23-32.

Jha, Manis K and Lee, Jae-chun and Kumari, Archana and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki (2011) Pressure leaching of metals from waste Printed Circuit Boards using sulphuric acid. Journal of Metals, 63 (8). pp. 29-32.

Jha, Manis K and Upadhyay, A K and Bagchi, D and Kumar, Vinay (2005) Recovery of zinc from electroplating effluent using cationic resins. Journal of Metallurgy and Materials Science, 47 (4). pp. 177-187.

Jha, Manis K and Upadhyay, R R and Lee, Jae-chun and Kumar, Vinay (2006) Recycling of zinc from textile effluent using ion-exchange process. Proceedings of Fall meetings and 28th conference . pp. 67-71.

Jha, Manis K and Upadhyay, R R and Lee, Jae-chun and Kumar, Vinay (2008) Treatment of rayon waste effluent for the removal of Zn and Ca using Indion BSR resin. Desalination, 228 (1-3). pp. 97-107.

Jha, N N and Singh, R K P and Jagannathan, K P and Jha, Ajit S and Singh, R P and kumar, B A and Sahu, S R and Singh, S B and Bose, P K and Pande, A M and Biswas, S K and Gupta, K N (1987) DRI as a coolant in BOF at Bokaro Steel Ltd. NML Technical Journal, 29 (1-4). pp. 25-32.

Jha, R and Mishra, G and Agarwal, M and Rao, M D and Meshram, A and Singh, K K (2022) Opportunities for an en-route to polymer inclusion membrane approach from conventional hydrometallurgical recycling of WPCBs: a mini-review. Canadian Metallurgical Quarterly .

Jha, S N and Biswas, A C and Bhattacharya, H P (1977) Rapid indirect volumetric method for determination of silicon in ferro-silicon. NML Technical Journal, 19 (3-4). pp. 52-53.

Jin, Rongchao and Qian, Huifeng and Wu, Zhikun and Zhu, Yan and Zhu, Manzhou and Mohanty, Ashok and Garg, Niti (2010) Size focusing: a methodology for synthesizing atomically precise gold nanoclusters. The Journal of Physical Chemistry Letters, 1 (19). pp. 2903-2910.

Jindal, Vikas and De, P K and Venkateswarlu, K (2006) Effect of Al3Sc precipitates on the work hardening behavior of aluminum–scandium alloys. Materials Letters, 60 (28). pp. 3373-3375.

Jindal, Vikas and Rupa, P K P and Mandal, G K and Srivastava, V C (2014) Effect of High-Temperature Severe Plastic Deformation on Microstructure and Mechanical Properties of IF Steel. Journal of Materials Engineering and Performance, 23(6) (IF-0.981). pp. 1954-1958.

Jindal, Vikas and Srivastava, V C (2008) Growth of intermetallic layer at roll bonded IF-steel/aluminum interface. Journal of Materials Processing Technology, 195 (1-3). pp. 88-93.

Jindal, Vikas and Srivastava, V C and Das, Arpan and Ghosh, R N (2006) Reactive diffusion in the roll bonded iron–aluminum system. Materials Letters, 60 (13-14). pp. 1758-1761.

Jindal, Vikas and Srivastava, V C and Ghosh, R N (2008) Development of IF steel–Al multilayer composite by repetitive roll bonding and annealing process. Materials Science and Technology, 24 (7). pp. 798-802.

Jindal, Vikas and Srivastava, V C and Uhlenwinkel, V (2009) On the role of liquid phase stability and GFA parameters. Journal of Non-Crystalline Solids, 355 (28-30). pp. 1552-1555.

Joarder, A (1994) On the bainite structure in Cr-Mo-V rotor steel. Steel Research, 65 (8). pp. 345-349.

Joarder, A and Sarma, D S (1992) Bainite morphologies in a 0.2 C-1.5 Mn steel. Steel Research , 63 (1). pp. 33-38.

Joarder, A and Sarma, D S (1993) Bainitic microstructures in a 0.2%C---1%Mo steel. Scripta Metallurgica et Materialia, 28 (4). pp. 517-522.

Joni, B and Al-Samman, T and Ghosh Chowdhury, S and Csiszar, G and Ungar, T (2013) Dislocation densities and prevailing slip-sytem types determined by X-ray line profile analysis in a textured AZ31 magnesium alloy deformed at different temperatures. Journal Of Applied Crystallography, 46(1) (IF-3.343). pp. 55-62.

Joseph, Kitheri and Kutty, K V Govindan and Goswami, M C and Rao, P R Vasudeva (2014) Viscosity and crystallization mechanism of cesium loaded iron phosphate glasses. Thermochimica Acta, 587 (IF-2.105). pp. 42-47.

Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Fayomi, O S I (2016) Comparative assessment of the degradation mechanism of micro-alloyed steel in E20 and E80 simulated fuel grade ethanol environments. Technologies and Materials for Renewable Energy, Environment and Sustainabilty: TMREES, 1758 (NON-SCI).

Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Tarafder, S (2018) Comparative assessment of the fracture behaviour of micro-alloyed and API-5L X65 steels in simulated fuel grade ethanol environment. Engineering Fracture Mechanics, 189 (IF-2.151). pp. 1-12.

Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Tarafder, S (2016) Role of Chloride in the Corrosion and Fracture Behavior of Micro-Alloyed Steel in E80 Simulated Fuel Grade Ethanol Environment. Materials, 9(6) (IF-2.654).

Joseph, O O and Sivaprasad, S and Fayomi, O S I (2017) Comparative study on the effect of NaNO2 in corrosion inhibition of micro-alloyed and API-5L X65 steels in E20 simulated FGE. Energy Procedia, 119 . pp. 953-960.

Joseph, P L and Chakrabarti, H K and Banerjee, T (1968) Comparative performances of some indigenous manganese dioxides in experimental dry cells. NML Technical Journal, 10 (1). pp. 18-24.

Joshi, Akashy J and Singh, Rajkumar P and Hosmani, Santosh S (2017) Microstructure evolution in boronized inconel 718 superalloy. Journal of Metallurgy and Materials Science, 59(1) . pp. 11-21.

Jyolsna, Jerin and Rath, R K and Kumar, Anil (2016) Partial Replacement of Sand and Cement by Iron Ore Slime for Concrete Building Material. Recent Trends in Civil Engineering & Technology, 6(2) . pp. 37-42.

Jyolsna, Jerin and Rath, R K and Kumar, Anil (2016) Recovery of Iron Values from Waste Iron Ore Slime. Journal of Materials & Metallurgical Engineering, 6(3) . pp. 1-7.

Kadgaye, Chetan and Hasan, Sk Md and Patra, Sudipta and Ghosh, M and Nath, S K and Karmakar, Anish (2021) Role of Cerium on Transformation Kinetics and Mechanical Properties of Low Carbon Steels. Metallurgical and Materials Transactions A, Online . pp. 1-18.

Kailath, A J and Dutta, K and Alex, T C and Mitra, A (2011) Crystallization Study of Cu56Zr7Ti37 Metallic Glass by Electrical Resistivity Measurement. Journal of Materials Science and Technology, 27 (3). pp. 275-279.

Kailath, A J and Kumar, Arvind and Mitra, A (2006) Effect of metalloids on crystallization and magnetic behaviour of FeCoSiB based metallic glass. Bulletin of Material Science, 29 (2). pp. 127-131.

Kailath, A J and Mandal, Soumen (2012) The effect of Sn addition on the crystallization and thermal stability of Cu–Zr–Ti metallic glasses. Journal of Alloys and Compounds, 537 . pp. 275-279.

Kailath, A J and Sinha, Arvind (2020) Mg-based biodegradable alloys for orthopedic implants - A review. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 59-70.

Kaithwas, C K and Bairi, L R and Mozumder, Y H and Pradhan, S K and Mandal, S (2023) On the role of grain size variation on pitting corrosion and passive film behavior of Alloy 600H. Materials and Corrosion / Werkstoffe und Korrosion .

Kaithwas, C K and Bhuyan, P and Pradhan, S K and Mandal, S (2020) 'Hall-Petch' type of relationship between the extent of intergranular corrosion and grain size in a Ni-based superalloy. Corrosion Science, 175 .

Kaithwas, C K and Bhuyan, P and Pradhan, S K and Mandal, S (2020) Hall-Petch’ type of relationship between the extent of intergranular corrosion and grain size in a Ni-based superalloy. Corrosion Science, 175 .

Kakati, A and Das, S (2020) Metallic gold thin film micropattern on polydimethylsiloxane film for flexible electronic sensors and circuits. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 49-55.

Kalamani Bawkar, Shilpa and Choubey, Pankaj Kumar and Parween, Rukshana and Panda, Rekha and Singh, Pramod Kumar and Jha, Manis K and Lee, Jae-chun (2022) Treatment of industrial effluent to reclaim copper using adsorption technique. Geosystem Engineering, 25(3-4)SI .

Kalamani Bawkar, Shilpa and Hait, Jhumki and Choubey, Pankaj K and Panda, Rekha and Singh, Pramod Kumar and Jha, Manis K (2022) Reclamation of Copper from Electronic Industry Effluent Using Plant Root Adsorbent. Journal of Metallurgy and Materials Science .

Kale, Girish Madhav and Srikanth, S (1999) Electrochemical determination of the activity of Na2O in the pyrochlore phase of the Sb2O4-NaSbO3 system. Journal of the American Ceramic Society, 82 (8). pp. 2161-2165.

Kale, Girish Madhav and Srikanth, S (2000) Electrochemical determination of the Gibbs Energy of formation of Na2Fe2O4 and Na3Fe5O9 employing Na-β-Al2O3 solid electrolyte. Journal of the American Ceramic Society, 83 (1). pp. 175-180.

Kalinkin, A M and Alex, T C and Nath, S K and Gurevich, B I and Kalinkina, E V and Tyukavkina, V V (2013) Geopolymers Based on Mechanically Activated Non-Ferrous Slags. Chemistry for Sustainable Development, 6 (IF-). pp. 647-655.

Kalinkin, A M and Kumar, S and Gurevich , B I and Kalinkina, E V and Tyukavkina, V V (2014) Synthesis of geopolymer materials based on slags of nonferrous metallurgy with the use of mechanoactivation. Glass Physics and Chemistry, 40(1) (IF-0.532). pp. 26-30.

Kalinkin, A M and Kumar, Sanjay and Gurevich , B I and Alex, T C and Kalinkina, E V and Tyukavkina, W and Kalinnokov, V T and Kumar, Rakesh (2012) Geopolymerization behavior of Cu-Ni slag mechanically activated in air and in CO2 atmosphere. International Journal of Mineral Processing, 112 . pp. 101-106.

Kaloshkina, Sergey and Churyukanovaa, Margarita and Zadorozhnyia, Vladislav and Shchetinina, Igor and Roy, Rajat K (2011) Curie temperature behaviour at relaxation and nanocrystallization of Finemet alloys. Journal of Alloys and Compounds, 509 (Suppl 1). S400-S403.

Kalpana, Y and Roy, S and Alka, (2014) Evaluation of plant extracts as corrosion inhibitors for Cu-alloys in river water. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 59-66.

Kalpana, Y and Sushanta, Roy and Alka, (2015) Evaluation of silanes as corrosion resistant coatings for Cu-alloy in Sea water. Journal of Metallurgy and Materials Science, 57(1) . pp. 27-32.

Kalshetty, Shivanand and Basavaraja, S and Bedre, Mahesh D and Deshpande, Raghunandan and Venkataraman, A (2011) Synthesis and characterization of SnO2 by alginate template method. Journal of Metallurgy and Materials Science, 53 (2). pp. 175-181.

Kamaraj, A and Dash, A and Murugaiyan, Premkumar and Misra, S (2020) Investigation on Mold Flux Melting and Consumption During Continuous Casting of Liquid Steel. Metallurgical and Materials Transactions B, Online (IF-2.035).

Kamaraj, A and Haldar, Nimai and Murugaiyan, Premkumar and Misra, S (2020) High-Temperature Simulation of Continuous Casting Mould Phenomena. Transactions of the Indian Institute of Metals, 73(8) (IF-1.205). pp. 2025-2031.

Kamaraj, A and Hore, S and Sathyamoorth, P (2017) Estimation and Analysis of Excess Oxygen Input into Ladle During Liquid Steel Tapping. Transactions of the Indian Institute of Metals, 70(9) (IF-0.533). pp. 2465-2476.

Kamaraj, A and Mandal, G K and Minj, R K and Misra, S and Bandyopadhyay, D (2017) Characterization and Evolution of Non-metallic Inclusions in Fe–Al–Si–O System. Transactions of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1887-1899.

Kamaraj, A and Mandal, G K and Roy, G G (2019) Control of Slag Carryover from the BOF Vessel During Tapping: BOF Cold Model Studies. Metallurgical and Materials Transactions B , 50(1) . pp. 438-458.

Kamaraj, A and Mandal, G K and Shanmugam, S P and Roy, G G (2022) Quantification and analysis of slag carryover during liquid steel tapping from BOF vessel. Canadian Metallurgical Quarterly, 61(2) . pp. 202-215.

Kamaraj, A and Saravana Kumar, S and Rajaguru, M (2018) State of the Art Control Measures for Aluminium Fade and SEN Clogging during Steelmaking Operations. IOP Conference Series: Materials Science and Engineering, 314 (IF-0.32).

Kamaraj, A and Tripathy, S and Chalavadi, G and Sahoo, P P and Misra, Siddhartha (2021) Characterization and Assessment of Mold Flux for Continuous Casting of Liquid Steel Using an Inverse Mold Simulator. Steel Resarch International, online . p. 2100121.

Kamaraj, Ashok and Meshram, Rohit B (2021) A comparative study on environmental impact analysis of synthetic and ESR flux used for refining of steel. 28th CIRP Conference on Life Cycle Engineering .

Kamaraj, Ashok and Murugaiyan, Premkumar and Mandal, G K and Roy, G G (2022) The Role of Slag Carryover on the Non-metallic Inclusion Evolution and Magnetic Behavior in Electrical Steel. Metallurgical and Materials Transactions B- Process Metallurgy and Materials Processing Science, 53(4) . pp. 1989-2003.

Kanari, N and Mishra, D and Fillipov, L and Diot, F and Mochon, J and Allain, E (2010) Kinetics of hematite chlorination with Cl(2) and Cl(2) + O(2). Part II. Chlorination with Cl(2) + O(2). Thermochimica Acta, 506 (1-2). pp. 34-40.

Kanari, N and Mishra, D and Fillipov, L and Diot, F and Mochon, J and Allain, E (2010) Kinetics of hematite chlorination with Cl(2) and Cl(2) + O(2): Part I. Chlorination with Cl(2). Thermochimica Acta, 497 (1-2). pp. 52-59.

Kanari, N and Mishra, D and Gaballah, I and Dupre, B (2004) Thermal decomposition of zinc carbonate hydroxide. Thermochimica Acta, 410 (1-2). pp. 93-100.

Kanari, N and Mishra, D and Mochon, J and Verdeja, L F and Diot, F and Allain, E (2010) Some kinetics aspects of chlorine-solids reactions. REVISTA DE METALURGIA, 46 (1). pp. 22-36.

Kancharla, H and Mandal, G K and Kumar, R R and Chakraborty, A and Singh, S S and Mondal, K (2022) Effect of Annealing Time on Coating Microstructure, Frictional and Electrochemical Behavior of Galvannealed Interstitial-Free Steel. Journal of Materials Engineering and Performance .

Kancharla, H and Mandal, G K and Maharana, S H and Singh, S S and Mondal, K (2022) Structure-Dependent Corrosion Behavior of Electrodeposited Zn Coating. Journal of Materials Engineering and Performance .

Kancharla, H and Mandal, G K and Pradeep, K G and Singh, S S and Mondal, K (2023) Understanding the Formation Mechanism of Al-Rich Interfacial Layer during Galvanizing of Cu Pre-coated High-Strength Steel Sheet. Journal of Materials Engineering and Performance .

Kancharla, H and Mandal, G K and Prasad, N K and Vishwanath, K and Bhushan, B and Godbole, K and Singh, S S and Mondal, K (2023) Effect of inter-critical annealing atmosphere on microstructure and subsequent corrosion behavior of hot-dip galvanized Mn containing high-strength steel. Journal of Applied Electrochemistry .

Kancharla, H and Mandal, G K and Singh, S S and Mondal, K (2022) Effect of prior copper-coating on the microstructural development and corrosion behavior of hot-dip galvanized Mn containing high strength steel sheet. Surface & Coating Technology, 437 .

Kancharla, H and Mandal, G K and Singh, S S and Mondal, K (2022) Effect of strip entry temperature on the interfacial layer and corrosion behavior of galvanized steel. Surface & Coating Technology, 433 .

Kanta, P Laxman Mani and Srivastava, V C and Venkateswarlu, K and Paswan, S and Mahato, B and Das, Goutam and Sivaprasad, K and Krishna, K Gopala (2017) Corrosion behavior of ultrafine-grained AA2024 aluminum alloy produced by cryorolling. International Journal of Minerals, Metallurgy, and Materials, 24(11) (IF- 0.943). pp. 1293-1305.

Kanungo, Nityananda (1968) Inaugural address. NML Technical Journal, 10 (3). pp. 12-13.

Kapoor, A N (1959) Some recent developments in protective coatings in U.K. NML Technical Journal, 1 (4). pp. 16-27.

Kapoor, A N and Biswas, S K and Singh, Santokh R (1975) Possibility of conversion of Indian phosphoric basic pig iron to steel using basic side-blown converter. NML Technical Journal, 17 (1-2). pp. 1-9.

Kapoor, A N and Padan, J S (1974) Proper methods of testing for selection of iron ore for iron making. NML Technical Journal, 16 (1-2). pp. 5-9.

Kapur, A N (1962) Scientific Research and Industrial Development and Role of National Research Development Corporation. NML Techinical Journal, 4 (2). pp. 12-14.

Kar, Abhijit and Chaudhuri, S and Sen, Pratik K and Ray, Ajoy K (2007) Evaluation of hardness of the interfacial reaction products at the alumina–stainless steel brazed interface by modeling of nanoindentation results. Scripta Materialia, 57 (9). pp. 881-884.

Kar, Abhijit and Ghosh, M and Ghosh, R N and Majumdar, Bhaskar S and Ray, Ajoy K (2008) Evolution of mechanical and electrical properties of tin–lead and lead free solder to copper joint interface. Materials Letters, 62 (1). pp. 151-154.

Kar, Abhijit and Ghosh, M and Majumdar, Bhaskar S and Ghosh, R N and Ray, Ajoy K (2007) Interfacial microstructure, shear strength and electrical conductivity of Sn-3 center dot 5Ag-o center dot 5In/Cu lead free soldered joints. Materials Technology, 32 (3). pp. 161-165.

Kar, Abhijit and Ghosh, M and Ray, Ajoy K and Ghosh, R N (2007) Effect of copper addition on the microstructure and mechanical properties of lead free solder alloy. Materials Science and Engineering A, 459 (1-2). pp. 69-74.

Kar, Abhijit and Ghosh, M and Ray, Ashok K and Ray, Ajoy K (2008) Effect of interfacial thickness and residual stress on the mechanical property of the alumina–stainless steel braze joint interface. Materials Science and Engineering A, 498 (1-2). pp. 283-288.

Kar, Abhijit and Mandal, Sudipta and Ghosh, R N and Ghosh, T K and Ray, Ajoy K (2007) Role of Ti diffusion on the formation of phases in the Al2O3-Al2O3 brazed interface. Journal of Materials Science, 42 (14). pp. 5556-5561.

Kar, Abhijit and Mandal, Sudipta and Rathod, S and Ray, Ajoy K (2006) Effect of Ti diffusivity on the formation of phases in the interface of alumina-alumina brazed with 97(Ag40Cu)3Ti filler alloy. Brazing And Soldering, Proceedings . pp. 219-225.

Kar, Abhijit and Mandal, Sudipta and Venkateswarlu, K and Ray, Ajoy K (2007) Characterization of interface of Al2O3–304 stainless steel braze joint. Materials Characterization, 58 (6). pp. 555-562.

Kar, Abhijit and Palit Sagar, S and Ray, Ajoy K (2007) Characterization of the ceramic–metal brazed interface using ultrasonic technique. Materials Letters, 61 (19-20). pp. 4169-4172.

Kar, Abhijit and Ray, Ajoy K (2007) Characterization of Al2O3–304 stainless steel braze joint interface. Materials Letters, 61 (14-15). pp. 2982-2985.

Kar, J and Guguloth, K (2021) Effect of Beam Oscillation on Creep Properties of Electron Beam Welded AISI 316L Stainless Steel. Metals and Materials International .

Kar, S and Maity, S and Chakravarty, S and Bhattacharyya, G and Dureja, V and Bhattacharjee, S (2002) Heavy metal distribution in some of the seasonal vegetables of Patamda, the agricultural nerve centre of East Singhbhum district in the state of Jharkhand. Journal of Metallurgy and materials Science., 44 (3). pp. 161-165.

Kar, Shubhada and Meena, L K and Srivastava, V C and Mandal, G K (2023) Microstructural, Mechanical, and Corrosion Behaviour of Ni-Fe-Cr-Al and Ni-Fe-Cr-Al-Co Alloys. Transactions of the Indian Institute of Metals .

Kar, Shubhada and Srivastava, V C and Mandal, G K (2023) Low-density nano-precipitation hardened Ni-based medium entropy alloy with excellent strength-ductility synergy. Journal of Alloys and Compounds, 963 .

Kar, Sujoy and Suman, Swati and Sivaprasad, S and Chaudhuri, Atanu and Bhattacharjee, A (2014) Processing-microstructure-yield strength correlation in a near β Ti alloy,Ti–5Al–5Mo–5V–3Cr. Materials Science and Engineering A, 610 (IF-2.409). pp. 171-180.

Karade, V C and Sutar, S S and Jang, J S and Gour, K S and Shin, S W and Suryawanshi, M P and Kamat, R K and Dongale, T D and Kim, J H and Yun, J H (2023) Unraveling the Effect of Compositional Ratios on the Kesterite Thin-Film Solar Cells Using Machine Learning Techniques. Crystals, 13(11) .

Karar, D and Bandyopadhyay, N R and Pramanick, A K and Acharyya, D and Conibeer, G and Banerjee, N and Kusmartseva, O E and Ray, M (2018) Quasi-Two-Dimensional Luminescent Silicon Nanosheets. Journal of Physical Chemistry C, 122(33) (IF-2.923). pp. 18912-18921.

Karar, D and Chatterjee, S and Pramanick, A K and Bandyopadhyay, N R and Ray, Mallar (2021) Electrical transport through pelletized tablet of silicene like quasi 2D crystalline silicon. Materials Letters, 303 .

Karehanumappa, K (2013) Contribution of green pellet properties in induration of iron oxide pellet production. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 77-81.

Karl, J (1969) Influence of forging-down and up-setting on the quality of heavy forgings. NML Technical Journal, 11 (3). pp. 16-17.

Karmakar, A and Ghosh, M and Chakrabarti, D (2013) Cold-rolling and inter-critical annealing of low-carbon steel: Effect of initial microstructure and heating-rate. Materials Science & Engineering A, 564 (IF-2.108). pp. 389-399.

Karmakar, A and Sivaprasad, S and Kundu, S and Chakrabarti, D (2014) Tensile Behavior of Ferrite-Carbide and Ferrite-Martensite Steels with Different Ferrite Grain Structures. Metallurgical and Materials Transactions A, 45A(4) (IF-1.730). pp. 1659-1664.

Karmakar, A and Sivaprasad, S and Nath, S K and Misra, R D K and Chakrabarti, D (2014) Comparison Between Different Processing Schedules for the Development of Ultrafine-Grained Dual-Phase Steel. Metallurgical and Materials Transactions A, 45A(5) (IF-1.730). pp. 2466-2479.

Karmaker, P and Mishra, D and Sahu, K K and Agarwal, A (2022) Selective Separation of Iron and Cobalt from Leached Tungsten Carbide Scrap by Solvent Extraction. Journal of Sustainability Metallurgy .

Kartha, K N (1963) An X-ray study of the reaction of calcium oxide and calcium chloride in the decomposition of monazite. NML Technical Journal, 5 (2). pp. 45-54.

Karuppiah, M T and Bhaskar Raju, G (2009) Anodic Degradation of CI Reactive Blue 221 Using Graphite and IrO2/TaO2/RuO2 Coated Titanium Electrodes. Industrial & Engineering Chemistry Research, 48 (4). pp. 2149-2156.

Katiyar, P K and Randhawa, N S (2020) A comprehensive review on recycling methods for cemented tungsten carbide scraps highlighting the electrochemical techniques. International Journal of Refractory Metals and Hard Materials, 90 (IF-2.794). p. 105251.

Katiyar, P K and Randhawa, N S (2019) Corrosion behavior of WC-Co tool bits in simulated (concrete, soil, and mine) solutions with and without chloride additions. International Journal of Refractory Metals and Hard Materials, 85 . p. 105062.

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) Anodic Dissolution Behaviour of Tungsten Carbide Scraps in Ammoniacal Media. Advanced Material Research, 828 (IF-). pp. 11-20.

Kaushik, V and Bar, H N and Ghosh, A (2021) Influence of extremely cold environmental conditions on interfacial fracture phenomenon of aerospace grade unidirectional composites. Thin-Walled Structures, 161 .

Kavipurapu, C S and Gupta, K K and Dasgupta, P and Chatterjee, N N and Pandey, L P (1993) Determination of boron in steels by inductively coupled plasma optical-emission spectrometry. Analusis, 21 (1). pp. 21-25.

Kavipurapu, C S and Srivastava, S C and Gupta, K K and Pandey , L P (1993) Extractive spectrophotometric method for the determination of niobium in steels. Mikrochimca Acta, 111 (1-3). pp. 127-132.

Kavitha, C and Ravichandran, K and Sankara Narayanan, T S N (2014) Effect of surface mechanical attrition treatment (SMAT) on zinc phosphating of steel. Transactions of the Institute of Metal Finishing, 92(3) (IF-0.747). pp. 161-168.

Kavitha, C and Sankara Narayanan, T S N and Ravichandran, K and Park, I S and Lee, Min Ho (2014) Deposition of zinc-zinc phosphate composite coatings on steel by cathodic electrochemical treatment. Journal of Coatings Technology and Research, 11(3) (IF- 1.280). pp. 431-442.

Keekan, Kishore and Jalondharaa, J Chhaganbhai and Abhilash, (2017) Extraction of Ce and Th from Monazite Using REE Tolerant Aspergillus niger. Mineral Processing and Extractive Metallurgy Review, 38(5) (IF-1.219). pp. 312-320.

Khadeer, S A and Babu, P R and Kumar, B R and Kumar, A S (2020) Influence of Upset Pressure on Microstructure and Mechanical Properties of Friction-Welded AISI 4140 Low Alloy Steel Pipes. Transactions of Indian Institute of Metals, 73(2) (IF-1.205). pp. 465-478.

Khadeer, S A and Babu, P R and Kumar, B Ravi and Kumar, A Seshu (2020) Evaluation of friction welded dissimilar pipe joints between AISI 4140 and ASTM A 106 Grade B steels used in deep exploration drilling. Journal of Manufacturing Processes, 56 (Part A) (IF-4.086). pp. 197-205.

Khairy, E M and Kamal, M. Hussein and El-Tawil, S Z (1966) Pre-oxidation of ilmenite ores and its bearing on their solid-state reduction by hydrogen. NML Technical Journal, 8 (2). pp. 10-14.

Khajuria, A and Akhtar, M and Bedi, R (2022) Boron addition to AISI A213/P91 steel: Preliminary investigation on microstructural evolution and microhardness at simulated heat-affected zoneZugabe von Bor zum Stahl X10CrMoVNbN9-1: Voruntersuchung zu Gefugeentwicklung und Mikroharte in simulierter Warmeeinflusszone. Materialwissenschaft und Werkstofftechnik, 53(10) . pp. 1167-1183.

Khajuria, A and Akhtar, M and Bedi, R (2021) A novel approach to envisage effects of boron in P91 steels through Gleeble weld-HAZ simulation and impression-creep. Journal of Strain Analysis for Engineering Design .

Khajuria, A and Kumar, Rajneesh and Bedi, R (2019) Effect of Boron Addition on Creep Strain during Impression Creep of P91 Steel. Journal of Materials Engineering and Performance , 28(7) . pp. 4128-4142.

Khajuria, A and Modassir, A and Bedi, R and Kumar, Rajneesh and Ghosh, M and Das, C R (2020) Microstructural investigations on simulated intercritical heat-affected zone of boron modified P91-steel. Materials Science and Technology, 36(13) (IF-1.835).

Khajuria, A and Modassir, A and Bedi, R and Kumar, Rajneesh and Ghosh, M and Das, C R and Albert, S K (2020) Influence of boron on microstructure and mechanical properties of Gleeble simulated heat-affected zone in P91 steel. International Journal of Pressure Vessels and Piping, 188 (IF-2.230).

Khajuria, A and Akhtar, M and Pandey, M K and Singh, M P and Raina, A and Bedi, R and Singh, Balbir (2019) Influence of ceramic Al2O3 particulates on performance measures and surface characteristics during sinker EDM of stir cast AMMCs. World Journal of Engineering, 16(4) . pp. 526-538.

Khalilahmada, and Ali, Muhammad and Ibrahim , Ather and Baig, Waqas Mehmood (2014) Optimising the yield of silicon carbide synthesised from indigenous biomass husk using different catalysts. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 173-177.

Khan, Asghar and Chakraborty, N R and Yadav, H L (2013) Solar tracking with no movable parts using multiplexed holographic lenses for photovoltaic application. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 183-186.

Khan, D K and Basu, D K and Mukherjee, K P (1978) Inhibition of sea water corrosion by chromate addition. NML Technical Journal, 20 (1-2). pp. 1-5.

Khan, D K and Mukherjee, K P and Banerjee, T (1966) Correlation of data in laboratory and field studies on sea water corrosion. NML Technical Journal, 8 (4). pp. 17-21.

Khan, S S and Rao, T R (2015) Multi objective optimization of turning parameters for Al 6061 using genetic algorithm. Journal of Metallurgy and Materials Science, 57(4) . pp. 243-249.

Khanduri, Prabhat Chandra and Upadhyay, T C (2016) Dependence of dielectric constant and loss tangent on electric field in antiferroelectric squaric acid crystal. Journal of Metallurgy and Materials Science, 58(4) (IF 0.04). pp. 213-220.

Khangaonkar, P R and Rahmat, A and Kutty, K G J (1992) Kinetic-study of the hydrothermal reaction between lime and rice-husk-ash silica. Cement &Concrete Research, 22 (4). pp. 577-588.

Khangaonkar, P R and Satyanarayana, C (1981) Liberation analysis and release analysis. Transactions of the institution of mining and metallurgy section c-mineral processing and extractive metallurgy, 90 (Sep). C113-C114.

Khangaonkar, P R and Subramani, K J B (1993) Flocculation of hematite fines by anionic polyacrylamide polymers. Minerals Engineering, 6 (7). pp. 765-774.

Khanra, A K and Godkhindi, M M and Pathak, L C (2005) Comparative studies on sintering behavior of self-propagating high-temperature synthesized ultra-fine titanium diboride powder. Journal of the American Ceramic Society, 88 (6). pp. 1619-1621.

Khanra, A K and Godkhindi, M M and Pathak, L C (2007) Sintering behaviour of ultra-fine titanium diboride powder prepared by self-propagating high-temperature synthesis (SHS) technique. Materials Science and Engineering A, 454-455 . pp. 281-287.

Khanra, A K and Pathak, L C and Godkhindi, M M (2009) Application of new tool material for electrical discharge machining (EDM). Bulletin of Materials Science, 32 (4). pp. 401-405.

Khanra, A K and Pathak, L C and Godkhindi, M M (2007) Carbothermal synthesis of zirconium diboride (ZrB2) whiskers. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 106 (3). pp. 155-160.

Khanra, A K and Pathak, L C and Godkhindi, M M (2008) Double SHS of ZrB2 powder. Journal of Materials Processing Technology, 202 (1-3). pp. 386-390.

Khanra, A K and Pathak, L C and Godkhindi, M M (2007) Microanalysis of debris formed during electrical discharge machining (EDM). Journal of Materials Science, 42 (3). pp. 872-877.

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2004) Effect of NaCl on the synthesis of TiB2 powder by a self-propagating high-temperature synthesis technique. Materials Letters, 58 (5). pp. 733-738.

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2003) Self-propagating-high-temperature synthesis (SHS) of ultrafine ZrB2 powder. Journal of Materials Science Letters, 22 (17). pp. 1189-1191.

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2005) Sintering of ultrafine zirconium diboride powder prepared by modified SHS technique. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 104 (6). pp. 282-284.

Khanra, A K and Sarkar, B R and Bhattacharya, B and Pathak, L C and Godkhindi, M M (2007) Performance of ZrB2–Cu composite as an EDM electrode. Journal of Materials Processing Technology, 183 (1). pp. 122-126.

Khanra, G P and Kumar, S G and De, Gangadhar and Mittal, M C (2000) Development of tungsten-copper composite for bi-propellant control thrusters. Journal of Metallurgy and materials Science, 42 (3). pp. 139-149.

Khatirkar, R K and Badole, R P and Vaish, A K and Humane, M M and De, P K and Paretkar, R K and Peshwe, D R and Prasad, D N (2003) Thermomechanical processing of low carbon, IF and IF high strength steels - A few typical cases. Journal of Metallurgy and materials Science, 45 (4). pp. 161-191.

Khosla, N K and Bhagat, R P and Gandhi, K S and Biswas, A K (1984) Calorimetric and Other Interaction Studies on Mineral-Starch Adsorption Systems. Colloids and Surfaces . pp. 321-336.

Khutia, N and Dey, P P and Paul, Surajit Kumar and Tarafder, S (2013) Development of non Masing characteristic model for LCF and ratcheting fatigue simulation of SA333 C–Mn steel. Mechanics of Materials, Volume 65, October 2013, Pages 88–102 (IF-1.936). pp. 88-102.

Khutia, N and Dey, P P and Sivaprasad, S and Tarafder, S (2014) Development of new cyclic plasticity model for 304LN stainless steel through simulation and experimental investigation. Mechanics of Materials, 78 (IF-2.225). pp. 85-101.

Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Jeong, Jinki and Pandey, B D (2011) Leaching kinetics of copper from waste printed circuit boards by electro-generated chlorine in HCl solution. Hydrometallurgy, 107 (3-4). pp. 124-132.

Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Pandey, B D (2011) Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process. Journal of Hazardous Materials, 198 . pp. 206-215.

Kim, Hong-In and Park, Kyung-Ho and Mishra, D (2009) Influence of sulfuric acid baking on leaching of spent Ni–Mo/Al2O3 hydro-processing catalyst. Hydrometallurgy, 98 (1-2). pp. 192-195.

Kim, Hong-In and Park, Kyung-Ho and Mishra, D (2009) Sulfuric acid baking and leaching of spent Co-Mo/Al2O3 catalyst. Journal of Hazardous Materials, 166 (2-3). pp. 1540-1544.

Kim, Joon-Soo and Lee, Jin-Young and Kumar, J Rajesh and Yoon, Ho-Soon (2010) Leaching methodologies for uranium. Journal of Metallurgy and Materials Science, 52 (1). pp. 1-17.

Kim, Min-seuk and Lee, Jae-chun and Park, S W and Jeong, Jinki and Kumar, Vinay (2013) Dissolution behaviour of platinum by electro-generated chlorine in hydrochloric acid solution. Journal of Chemical Technology and Biotechnology, 88(7) (IF-2.504). pp. 1212-1219.

Kiran, U R and Panchal, A and Kamal, S S K and Sahu, K K and Mishra, D and Nandy, T K and Nagesh, Ch R V S (2023) Microstructure and Mechanical Properties of Tungsten Heavy Alloy Prepared Using Tungsten Metal Powder Produced from Heavy Alloy Scrap. Defence Science Journal, 73(2) . pp. 240-250.

Kishore, Kaushal and Chandan, A K and Hung, P T and Kumar, Saurabh and Kawasaki, M and Gubicza, Jeno (2022) On the enhanced hardening ability and plasticity mechanisms in a novel Mn-added CoCrNi medium entropy alloy during high-pressure torsion. Journal of Alloys and Compounds, 904 .

Kishore, Kaushal and Chandan, A K and Hung, P T and Kumar, Saurabh and Ranjan, Manish and Kawasaki, M and Gubicza, Jeno (2023) Effect of Si on the evolution of plasticity mechanisms, grain refinement and hardness during high-pressure torsion of a non-equiatomic CoCrMnNi multi-principal element alloy. International Journal of Plasticity, 169 .

Kishore, Kaushal and Chandan, A K and Purty, M and Karthik, V and Mishra, G and Sahoo, Biraj K and Meena, L K and Chakraborty, J (2023) Effect of microstructure on corrosion behavior of medium manganese steel. Materials Letters, 330 .

Kishore, Kaushal and Chandan, A K and Sahoo, Biraj K and Meena, L K (2022) Novel observation of dominant role of strain rate over strain during pre-straining on corrosion behaviour of 304L austenitic stainless steel. Materials Chemistry and Physics, 277 .

Kishore, Kaushal and Kumar, R Gaurav and Chandan, A K (2021) Critical assessment of the strain-rate dependent work hardening behaviour of AISI 304 stainless steel. Materials Science and Engineering A, 803 . p. 140675.

Kishore, Kaushal and Kushwaha, S and Teja, K S P and Chandan, A K and Mukherjee, M and Adhikary, M and Kumar, A (2023) Sigma phase embrittlement-induced failures of heat-resistant stainless steel traveling grate links. Engineering Failure Analysis, 144 .

Kisku, Nicky and Sau, D C (2017) Recovery of Tungsten and Copper from Waste Tungsten Copper Borings. Journal of Materials & Metallurgical Engineering, 7(1) (Non-SCI). pp. 1-8.

Kjellgren, Bengt R F (1961) Status of the Beryllium Industry in the United States of America. NML Technical Journal, 3 (1). pp. 37-45.

Kodge, Anil Kumar and Kalyane, Sangshetty and Lagashetty, Arun Kumar (2011) Synthesis and characterization of polyvinyl alcoholcobalt oxide nanocomposite film. Journal of Metallurgy and Materials Science, 53 (4). pp. 387-392.

Kokce, Ali and Dogan , Ali and Ceylan, Mehmet (1991) The Calculation of Martensite Habit Plane by using Elastic Strain Energy. NML Technical Journal, 33 (1-2). pp. 3-8.

Konar, J and Banerjee, N G (1965) Dissolution of steel and absorption of hydrogen by steel during acid pickling in presence of inhibitor Part II. NML Technical Journal, 7 (4). pp. 4-6.

Konar, J and Banerjee, N G (1971) Form of hydrogen in steel. NML Technical Journal, 13 (3). pp. 76-79.

Konar, J and Banerjee, N G (1974) Vacuum heating hydrogen determination in aluminium and aluminium alloys. NML Technical Journal, 16 (1-2). pp. 18-19.

Konar, J and Banerjee, N G and Chakravarti, H K and Banerjee, T (1968) Pickling of ferrous materials Part-I-with hydrochloric acid. NML Technical Journal, 10 (2). pp. 27-30.

Konar, J and Chandra, N and Amritphale, S S and Das, N N and Srivastava, S C (2003) Corrosion behaviour of white cast iron in organic acids and their sodium salts. Journal of Metallurgy and Materials Science, 45 (1). pp. 39-43.

Konar, J and Gupta, K K and Chandra, N and Amritphale, S S (2004) Effect of p-nitrophenol on corrosion behaviour of white Cast iron and aluminium added white Cast iron. Journal of Metallurgy and materials Science, 46 (3). pp. 191-196.

Konar, J and Kumari, Smita and Nag, Sudha T and Amritphale, S S and Chandra, N (2009) Effect of sodium hexameta phosphate in the presence and absence of calcium chloride on corrosion behaviour of different types of white cast iron. Journal of Metallurgy and Materials Science, 51 (1). pp. 53-59.

Konar, J and Kumari , S and Das, S and Ranjan, Rajeev (2018) Analysis of major and trace elements of electronic waste materials using microwave digestion and AAS, ICP techniques. Journal of Metallurgy and Materials Science, 60(1) . pp. 21-24.

Konar, J and Upadhyay, A K and Pimple, S and Chakravarty, S and Gupta, K K (2007) Analysis of major and minor elements in coal and siliceous materials using microwave digestion and AAS technique. Journal of Metallurgy and Materials Science, 49 (1). pp. 45-50.

Kranti, R and Kumar, Manoj and Ranganathan, S and Saxena, S B Lal and Mehrotra, S P (2009) Resistance Heating of Oxide Slags - Theoretical Model and Experimental Validation. The Canadian Metallurgical Quarterly, 48 (4). pp. 387-397.

Krishanan, R M (1959) Foundry Industry in Great Britain and some general trends of development. NML Technical Journal, 1 (4). pp. 5-15.

Krishna, K Gopala and Das, Goutam and Venkateswarlu, K and Kumar, K C Hari (2017) Studies on Aging and Corrosion Properties of Cryorolled Al–Zn–Mg–Cu (AA7075) Alloy. Transactions of the Indian Institute of Metals, 70(3) (IF-0.533). pp. 817-825.

Krishna, K Gopala and Singh, Nidhi and Venkateswarlu, K and Kumar, K C Hari (2011) Tensile Behavior of Ultrafine-Grained Al-4Zn-2Mg Alloy Produced by Cryorolling. Journal of Materials Engineering and Performance, 20 (9). pp. 1569-1574.

Krishna, K Gopala and Sivaprasad, S and Sankara Narayanan, T S N and Kumar, K C Hari (2012) Localized corrosion of an ultrafine grained Al-4Zn-2Mg alloy produced by cryorolling. Corrosion Science, 60 . pp. 82-89.

Krishna, K Gopala and Sivaprasad, S and Venkateswarlu, K and Kumar, K C Hari (2012) Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy. Materials Science and Engineering A, 535 . pp. 129-135.

Krishna, M V B and Chandrasekaran, K and Chakravarty, S and Karunasagar, D (2015) An integrated approach based on oxidative pyrolysis and microwave-assisted digestion for the multi-elemental analysis of coal samples by ICP-based techniques. Fuel, 158 (IF-3.520). pp. 770-778.

Krishnan, A and Dutta, S and Subramanian, K and Panda, A K and Murugaiyan, Premkumar and Roy, R K (2018) Evaluation of Microstructural and Mechanical Behaviours of Tempered 2.25Cr-1Mo Steel Through Electromagnetic Characterization. Transactions of the Indian Institute of Metals , 71(10) (IF-1.176). pp. 2395-2402.

Krishnan, R M and Nijhawan, B R (1964) Scope and function of the regional foundry station of the National Metallurgical Laboratory at Batala. NML Technical Journal, 6 (2). pp. 25-31.

Krishnan, R M and Nijhawan, B R and Lalkaka, R D (1963) Symposium on recent developments in Iron and Steel making with special reference to Indian conditions-A Review. NML Technical Journal, 5 (2). pp. 10-16.

Krishnarao, R V and Godkhindi, M M and Chakraborty, M and Mukunda, P G (1994) Formation of sic whiskers from compacts of raw rice husks. Journal of Materials Science, 29 (10). pp. 2741-2744.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Corrosion resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Alloys and Compounds, 480 (2). pp. 765-770.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2003) Electrodeposited Ni-B alloy films: Preparation and structural aspects. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 341-346.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2006) Electrodeposited Ni–B coatings: Formation and evaluation of hardness and wear resistance. Materials Chemistry and Physics, 99 (2-3). pp. 300-308.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2008) Electrodeposited Ni–B–Si3N4 composite coating: Preparation and evaluation of its characteristic properties. Journal of Alloys and Compounds, 466 (1-2). pp. 412-420.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2012) Electroless Ni-B-Si3N4 composite coating: deposition and evaluation of its characteristics properties. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42(7) . pp. 920-927.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2005) Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance. Surface and Coatings Technology, 190 (1). pp. 115-121.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Wear resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Materials Science, 44 (2). pp. 433-440.

Kruthik, N Lakshmi and Karthika, S and Bhaskar Raju, G and Prabhakar, S (2013) Efficacy of electrocoagulation and electrooxidation for the purification of wastewater generated from gelatin production plant. Journal of Environmental Chemical Engineering, 1(3) (IF-). pp. 183-188.

Kulkarni, A D and Deepa, V and Saha, Malini and Srinivasan, K (2004) Impact toughness of copper, zinc, tin, a-brass and phosphor bronze at different temperatures. Journal of Metallurgy and materials Science., 46 (3). pp. 175-182.

Kulshrestha, S C and Jayaram, K M V and Dar, K K (1973) A study of the physiology of sulphur-oxidizing bacteria and its effect on uranium mobilization and leaching at Udaisagar, Udaipur District, Rajasthan. NML Technical Journal, 15 (4). pp. 42-46.

Kumar, A and Arora, K S and Gupta, R K and Harmain, G A (2019) Investigation on interface morphology and joint configuration of dissimilar sheet thickness FSSW of marine grade Al alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(9) . pp. 1-13.

Kumar, A and Chacko, Z E and Malathi, M and Godiwalla, K M and Ajmani, S K and Ranganathan, S (2014) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85(5) (IF-1.023). pp. 927-934.

Kumar, A and Singh, R J and Mitra, A and Panda, A K (2008) Preparation of Fe and Co based amorphous wires by in-water quenching process. Materials Science and Technology, 24 (5). pp. 618-622.

Kumar, A and Tarafder, S and Mukherjee, Surojit and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2003) Effect of plasma ion implantation on the hydrogen embrittlement of Cu strengthened HSLA-100 steel. Journal of Materials Science, 38 (12). pp. 2667-2671.

Kumar, A and Tripathi, B and Mishra, S and Kumar, P and Sharma, I H (2015) Power consumption and design optimization of a sustainable H fuel cell powered vehicle. Journal of Metallurgy and Materials Science, 57(3) . pp. 157-165.

Kumar, A Seshu and Ravi Kumar, B and Datta, G L and Ranganath, V R (2009) Effect of Microstructure and Grain Size on the Fracture Toughness of a Micro Alloyed Steel. Materials Science and Engineering A .

Kumar, Alok and Kumari, Sneha and Mustapha, K A and Chakladar, S and Chakravarty, S (2023) Geochemical characteristics of the Rajmahal coals in Dhulia North Block, Eastern India: implication to their utilization and environment. Environmental Geochemistry and Health, 40(10) SI . pp. 6967-6983.

Kumar, Amarjeet and Murugaiyan, Premkumar and Panda, A K and Roy, Rajat K (2020) Effect of compositional elements and processing routes on structural and thermal response in Fe-based metallic glasses. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153279.

Kumar, Amit and Guguloth, K and Pandey, S M and Fydrych, D and Sirohi, S and Pandey, C (2023) Study on Microstructure-Property Relationship of Inconel 617 Alloy/304L SS Steel Dissimilar Welds Joint. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science .

Kumar, Amritesh and Sarma, Ritam and Bag, Swarup and Srivastava, V C and Kapil, Sajan (2023) Physics-informed machine learning models for the prediction of transient temperature distribution of ferritic steel in directed energy deposition by cold metal transfer. Science and Technology of Welding and Joining, 28(9) . pp. 914-922.

Kumar, Anil (2004) Hot-dip zinc coatings - A comparative study: Part II. Journal of Metallurgy and materials Science, 46 (2). pp. 115-121.

Kumar, Anil and Jha, G (2001) Hot-dip zinc coatings - A comparative study. Journal of Metallurgy and materials Science, 43 (1). pp. 9-16.

Kumar, Anil and Khanna, A S and Banerjee, M K (2001) Epoxy coatings for rebar - A study. Journal of Metallurgy and materials Science, 43 (3). pp. 189-195.

Kumar, Anil and Ravi Kumar, B and Chattoraj, I and Mukherjee, S and Basumallick, A (2004) Alteration in hydrogen absorption by and hydrogen permeation through a high-strength low-alloy steel due to plasma source ion implantation of nitrogen. Metallurgical and Materials Transactions B, 35 (6). pp. 1123-1128.

Kumar, Anuj and Kumar, Sanjay (2013) Developments of Paving blocks from synergistic use of red mud and fly ash using geopolymerization. Construction and Building Materials, 38 . pp. 865-871.

Kumar, Arun and Agarwal, Ashish and Kumar, A and Kumar, Sunil (2023) Prediction of hot metal temperature in a blast furnace iron-making process using multivariate data analysis and machine learning methodology. Metallurgical Research & Technology, 120(6) .

Kumar, Ashish and Nirala , A and Singh, V P and Sahoo, Biraj K and Singh, R C and Chaudhary, R and Dewangan, Ashok K and Gaurav, G K and Klemes, J J and Liu, X H (2023) The utilisation of coconut shell ash in production of hybrid composite: Microstructural characterisation and performance analysis. Journal of Cleaner Production, 398 .

Kumar, Ashish and Singh, V P and Mallik, A and Sahoo, Biraj K and Singh, R C and Chaudhary, R (2024) The utilization of agricultural and industrial waste in the synthesis of AA7075-based novel lightweight composite. Journal of Materials Science .

Kumar, Ashish and Singh, V P and Nirala , A and Singh, R C and Chaudhary, R and Mourad, A H I and Sahoo, Biraj K and Kumar , Deepak (2023) Influence of tool rotational speed on mechanical and corrosion behavior of friction stir processed AZ31/Al2O3 nanocomposite. Journal of Magnesium and Alloys, 11(7) . pp. 2585-2599.

Kumar, Ashish and Kumar, Santosh and Kumar, Rajneesh (2015) Some studies on Heat-Affected Zone (HAZ)Toughness behavior of API 5L X52 steel. Indian welding Journal, 48(2) . pp. 68-75.

Kumar, B Ravi and Singh, Vishal and Nanda, T and Adhikary, M and Haldar, Nimai and Venugopalan, T (2018) Effect of Tailoring Martensite Shape and Spatial Distribution on Tensile Deformation Characteristics of Dual Phase Steels. Journal of Engineering Materials and Technology, 140(2) (IF- 1.141).

Kumar, B V and Mohanty, O N (1992) On the correct prediction of isothermal transformation diagrams for low carbon and low alloy steels — Comment on available data. Scripta Metallurgica et Materialia, 26 (1). pp. 133-137.

Kumar, C and Jena, P S M and Singh, R K and Harmain, G A and Sahu, J K (2021) Strain ratio effect on microstructural evolution during low cycle fatigue exploitation of nickel base superalloy IN 740H. International Journal of Pressure Vessels and Piping, 194 Part B .

Kumar, D Sameer and Suman, K N S and Poddar, Palash (2020) Performance evaluation of surface modified nano Al2O3 (p) reinforced AZ91E composites under impact and fatigue loading conditions. Strojnícky časopis – Journal of Mechanical Engineering, 70(1) .

Kumar, D Sameer and Suman, K N S and Poddar, Palash (2020) A study on the impact and fatigue failure of AZ91E–Ni coated alumina composites. Canadian Metallurgical Quarterly, 59(3) . pp. 316-323.

Kumar, Dhanranjan and Kumari, Munchun and Murugaiyan, Premkumar and Das, T K and Roy, Rajat K and Mitra, A and Shuvaeva, E and Churyukanov, M and Kaloshkin, S and Panda, A K (2020) Impact of uniaxial stress on soft-magnetic and magneto-impedance properties of vitrified magnetostrictive microwires. Journal of Alloys and Compounds, 831 (IF-4.175). p. 154861.

Kumar, G and Bar, H N and Kumar, A (2022) Influence of Dynamic Strain Aging on Ratcheting Deformation Behavior of SA333 Gr-6 Steel. Journal of Materials Engineering and Performance .

Kumar, G and Dey, U K and Mishra, S C and Sahay, V K (2000) Water recycling system in a coal beneficiation plant. Journal of Metallurgy and materials Science, 42 (4). pp. 243-248.

Kumar, G and Kumar, A and Bar, H N (2021) Effect of dynamic strain aging on cyclic deformation in piping material SA333 Gr-6 steel. International Journal of Pressure Vessels and Piping, 194 Part A .

Kumar, G and Kumar, Ashok and Bar, H N and Sivaprasad, S (2019) A comparative assessment of cyclic deformation behavior of SA333 Gr-6 steel at ambient and elevated temperatures. International Journals of Material Research, 110(11) . pp. 1000-1009.

Kumar, Harendra and Mohapatra, J N and Roy, Rajat K (2010) Evaluation of tempering behaviour in modified 9Cr–1Mo steel by magnetic non-destructive techniques. Journal of Materials Processing Technology, 210 (4). pp. 669-674.

Kumar, K and Randhawa, N S and Gharami, Kalpataru and Sau, D C and Kumar, Manoj (2016) Studies on dissolution kinetics of dolime in electrothermal magnesium slag. Russian Journal of non-ferrous metals, 57(4) (IF-0.238). pp. 287-295.

Kumar, Krishna (2017) Scope Of Distillation in Extraction,Purification & Recycling of Strategic Metals- a review. International conference on Non-ferrous Minerals & Metals - 2017 . pp. 65-72.

Kumar, Krishna and Das, Suchandan K and Kumar, Manoj (2020) Heat transfer modelling of dropwise condensation behaviour of magnesium vapours in the electrothermal production of magnesium. Canadian Metallurgical Quarterly, 59(2) (IF-1.456). pp. 134-150.

Kumar, M and Raj, I A and Pattabiraman, R (2008) Y2Zr2O7 (YZ)-pyrochlore based oxide as an electrolyte material for intermediate temperature solid oxide fuel cells (ITSOFCs) - Influence of Mn addition on YZ. Materials Chemistry and Physics, 108 (1). pp. 102-108.

Kumar, M and Srikanth, S and Ravi Kumar, B and Alex, T C and Das, Swapan K (2009) Synthesis of pure and Sr-doped LaGaO3, LaFeO3 and LaCoO3 and Sr,Mg-doped LaGaO3 for ITSOFC application using different wet chemical routes. Materials Chemistry and Physics, 113 (2-3). pp. 803-815.

Kumar, M Ashok and Reddy, G Ramachandra and Reddy, G Harinatha and Reddy, N Subbarami and Reddy, K Hemachandra and Reddy, Y V Mohana (2011) Mechanical properties of randomly oriented short Sansevieria trifasciata fibre/epoxy composites. Journal of Metallurgy and Materials Science, 53(1) . pp. 85-95.

Kumar, M Ashok and Reddy, G Ramachandra and Reddy, G Harinatha and Reddy, K Hemachandra and Reddy, Y Venkata Mohana (2011) Fabrication and performance of hybrid betel nut (Areca catechu), short fiber (Sansevieria cylindrica : Agavaceae) epoxy composites. Journal of Metallurgy and Materials Science, 53 (4). pp. 375-386.

Kumar, M Ashok and Reddy, K Hemachandra and Reddy, Y Venkata Mohana and Reddy, G Ramachandra and Kumar, N S Venkatesh and Reddy, BH Nanjunda (2010) Assessment of nanoclay filled epoxy on mechanical, thermal and chemical resistance properties of nanocomposites. Journal of Metallurgy and Materials Science, 52 (4). pp. 305-315.

Kumar, M S and Yang, C H and Farooq, M U and Kavimani, V and Adesoji, A A (2023) Enhanced structural integrity of Laser Powder Bed Fusion based AlSi10Mg parts by attaining defect-free melt pool formations. Scientific Reports, 13(1) .

Kumar, Manoj and Awasthi, R and Pramanick, A K and Singh, R N (2011) New ternary mixed oxides of Fe, Ni and Mo for enhanced oxygen evolution. International Journal of Hydrogen Energy, 36 (20). pp. 12698-12705.

Kumar, Manoj and Babu, M Nani and Mankhand, T R and Pandey, B D (2010) Precipitation of sodium silicofluoride (Na2SiF6) and cryolite (Na3AlF6) from HF/HCl leach liquors of alumino-silicates. Hydrometallurgy, 104 (2). pp. 304-307.

Kumar, Manoj and Mankhand, T R and Murthy, D S R and Mukhopadhyay, R and Prasad, P M (2007) Refining of a low-grade molybdenite concentrate. Hydrometallurgy, 86 (1-2). pp. 56-62.

Kumar, Manoj and Pal, J and Ghosh, S (2004) Performance of sponge iron charging in electric arc furnace. Journal of Metallurgy and materials Science, 46 (3). pp. 197-204.

Kumar, Manoj and Prasad, Sanjay and Ranganathan, S (2006) Kinetics of reduction of manganese ore under different flow rates of inert gas. Journal of Metallurgy and Materials Science, 48 (1). pp. 23-30.

Kumar, Manoj and Ranganathan, S and Sinha, S N (2005) Reduction of manganese ores - A comparative study. Journal of Metallurgy and Materials Science, 47 (3). pp. 149-157.

Kumar, Manoj and Sau, D C and Nishant, P and Bhattacharya, Maitreyee (2013) Reduction of ammonium paratungstate generated during hydrometallurgical processing of tungsten-copper borings. Harnessing of Nonferrous Minerals and Wastes, 828 . pp. 123-134.

Kumar, Manoj and Yoo, Kyoungkeun and Kim, Min-seuk and Jeong, Jinki and Lee, Jae-chun (2011) Leaching of metals from waste printed circuit boards(PCBS) by sulphuric acid in the presence of hydrogen peroxide and nitric acid. The Banaras Metallurgist, 16 . pp. 141-148.

Kumar, Mukesh and Mishra, Suman K and Mitra, R (2013) Effect of Ar:N-2 ratio on structure and properties of Ni-TiN nanocomposite thin films processed by reactive RF/DC magnetron sputtering. Surface & Coatings Technology, 228 (IF-1.867). pp. 100-114.

Kumar, Naresh and Venugopal, R and Soren, S and Chakravarty, S (2020) Thermodynamic Modelling of Effect of Flux on the Liquidus Temperatures and Phase transitions in Coal Ash. Journal of the Geological Society of India, 96(1) (IF-0.899). pp. 87-90.

Kumar, Niraj (1995) Modern PID controllers: An analysis to make them user friendly. NML Technical Journal, 37 (3). pp. 95-106.

Kumar, Nitesh and Kumar, Binay and Pathak, L C (2017) Effect of shapes and compositions of spark plasma sintered ZrB -C composites on performance as EDM 2 tools. Journal of Metallurgy and Materials Science, 59(4) . pp. 143-152.

Kumar, P and Kumar, Rakesh and Rai, B and Subramanian, S and Srikanth, S (2017) Preface. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 251-252.

Kumar, P and Mondal, A K and Ghosh Chowdhury, S and Krishna, G and Ray, A K (2017) Influence of additions of Sb and/or Sr on microstructure and tensile creep behaviour of squeeze-cast AZ91D Mg alloy. Materials Science and Engineering A-Structural Materials Properties Micro-structure and Processing, 683 (IF-3.094). pp. 37-45.

Kumar, P and Murthy, G V S (2000) Ultrasonic evaluation of double poured rolls. NDT & E International, 33 (1). pp. 43-45.

Kumar, P and Roy, A (2015) Creep damage and remaining life assessment of service exposed engineering materials used in petrochemical industry. Journal of Metallurgy and Materials Science, 57(1) . pp. 41-56.

Kumar, P Prem and Kannan, K and Natesan, M (2008) Natural thyme as volatile corrosion inhibitor for mild steel in HCI environment. Journal of Metallurgy and Materials Science, 50 (4). pp. 227-234.

Kumar, Pankaj and Husain, M M and Hembrom, S and Roy, B N (2022) Microstructure Property Correlation of Low Alloy Steel Processed through Heat Treatment. YMER, 21(11) . pp. 1-11.

Kumar, Pravesh (1998) Effect of fillers on acousto ultrasonic response in GRP composites. Bulletin of Materials Science, 21 (1). pp. 93-97.

Kumar, Pravesh (1995) Felicity ratio to assess strengths of GRP composites. NML Technical Journal, 37 (3). pp. 107-112.

Kumar, Pravesh and Srivastava, V K (1995) Modified acousto ultrasonic technique for the measurement of mechanical properties of GRP laminates. NML Technical Journal, 37 (1). pp. 25-32.

Kumar, Rajendra (1972) Immiscibility in binary-alloys of group Ia metals (lithium, sodium and potassium). Journal of materials science, 7 (12). pp. 1426-1433.

Kumar, Rajendra (1972) Immiscibility in binary-alloys of group IB metals (copper, silver and gold) - semi empirical approach. Journal of Materials Science, 7 (12). pp. 1409-1425.

Kumar, Rajendra (1975) NML-PM2 conductor-A versatile alloy aluminium conductor-why and for whom? NML Technical Journal, 17 (3-4). pp. 13-34.

Kumar, Rajendra and Bose, S K (1971) Structural stability of rapidly solidified Al---Cu super-saturated solid solutions. Scripta Metallurgica, 5 (6). pp. 515-518.

Kumar, Rajendra and Ray, R K and Biswas, A K (1992) A sem-edax study of sea nodules from central Indian-ocean basin. Transactions of The Indian Institute of Metals, 45 (5). pp. 287-301.

Kumar, Rajendra and Singh, Manjit (1968) A centrifuging technique for studying structure of liquid metals. NML Technical Journal, 10 (2). pp. 24-26.

Kumar, Rajendra and Singh, Manjit (1974) Electric grade aluminium alloy (NML-PM2). NML Technical Journal, 16 (3-4). pp. 35-40.

Kumar, Rajendra and Sivaramakrishnan, C S (1974) Distribution of copper and magnesium between molten aluminum and lead. Transactions of the Japan Institute of Metals, 15 (5). pp. 319-323.

Kumar, Rajendra and Sivaramakrishnan, C S (1972) Establishment of the Temperature Range of Accidental Overheating of Precipitation Hardened Aluminium-Copper Alloys. NML Technical Journal, 14 (1). pp. 16-23.

Kumar, Rajendra and Sivaramakrishnan, C S (1983) The influence of pseudosurfaces on solidification of aluminum-alloys. Transactions of the Indian Institute of metals, 36 (4). pp. 298-303.

Kumar, Rajendra and Sivaramakrishnan, C S (1983) Thermodynamics and structure of aluminum-alloys. Transactions of the Indian Institute of metals, 36 (4). pp. 253-258.

Kumar, Rajneesh and Singh, K and Pandey, S (2012) Process forces and heat input as function of process parameters in AA5083 friction stir welds. Transactions of Nonferrous Metals Society of China, 22(2) (IF-). pp. 288-298.

Kumar, Rakesh (1999) Anomalous dependence of leachability on surface area during sulphuric acid leaching of nickel- and copper-doped birnessites. Hydrometallurgy, 52 (1). pp. 71-79.

Kumar, Rakesh (2017) Characterisation of Minerals and Ores: On the Complementary Nature of Select Techniques and Beyond. Transactions of the Indian Institute of Metals, 70(2) (IF- 0.533). pp. 253-277.

Kumar, Rakesh (2023) In Retrospect: Some Peculiarities Observed in the Mechanical Activation of Ground-Granulated Blast Furnace Slag and Fly Ash. Transactions of the Indian Institute of Metals .

Kumar, Rakesh (1994) Leaching characteristics of disordered birnessite and goethite doped with ni, co and cu in sorption mode. Materials Transacrions JIM, 35 (1). pp. 27-34.

Kumar, Rakesh and Alex, T C (2015) Elucidation of the Nature of Structural Heterogeneity During Alkali Leaching of Non-activated and Mechanically Activated Boehmite (gamma-AlOOH). Metallurgical and Materials Transactions B- Process Metallurgy and Materials Processing Science, 46(4) . pp. 1684-1701.

Kumar, Rakesh and Alex, T C (2023) Phase stability and role of mechanical activation in the chemical beneficiation of red mud. Journal of Thermal Analysis and Calorimetry, 148 . pp. 9813-9827.

Kumar, Rakesh and Biswas, A K (1986) Zinc recovery from zawar ancient siliceous slag. Hydrometallurgy, 15 . pp. 267-280.

Kumar, Rakesh and Das, S and Ray, R K and Biswas, A K (1993) Leaching of pure and cobalt bearing goethites in sulphurous acid: kinetics and mechanisms. Hydrometallurgy, 32 (1). pp. 39-59.

Kumar, Rakesh and Das, S K and Ray, R K and Biswas, A K (1994) A SEM backscattered electron mode study of microstructural features of ferromanganese nodules from central indian-ocean basin. Transactions of the indian institute of metals, 47 (5). pp. 273-285.

Kumar, Rakesh and Das, Samar (1998) Physicochemical and structural factors in the sulfuric acid leaching of nickel- and copper-bearing synthetic birnessites. Metallurgical and Materials Transactions B, 29 (3). pp. 527-540.

Kumar, Rakesh and Kumar, Sanjay and Alex, T C and Singla, Rashmi (2018) Mapping of Calorimetric Response for the Geopolymerisation of Mechanically Activated Fly ash. Journal of Thermal Analysis and Calorimetry (IF-2.209). pp. 1-17.

Kumar, Rakesh and Kumar, Sanjay and Alex, T C and Singla, Rashmi (2019) Mapping of calorimetric response for the geopolymerisation of mechanically activated fly ash. Journal of Thermal Analysis and Calorimetry, 136(3) . pp. 1117-1133.

Kumar, Rakesh and Kumar, Sanjay and Badjena, S and Mehrotra, S P (2005) Hydration of mechanically activated granulated blast furnace slag. Metallurgical and Materials Transactions B, 36 (6). pp. 873-883.

Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2007) Towards sustainable solutions for fly ash through mechanical activation. Resources, Conservation and Recycling, 52 (2). pp. 157-179.

Kumar, Rakesh and Ray, R K (1998) Modeling Microstructural Heterogeneity in Materials by Using Q-Mode Factor Analysis. Materials Characterization, 40 (1). pp. 7-13.

Kumar, Rakesh and Ray, R K and Biswas, A K (1990) Physico-chemical nature and leaching behaviour of goethites containing Ni, Co and Cu in the sorption and coprecipitation mode. Hydrometallurgy, 25 . pp. 61-83.

Kumar, Ramesh A V and Balasubramaniam, R (1999) Delhi iron pillar rust characterization by fourier transform infrared spectroscopy analysis. NML Technical Journal, 40 (1). pp. 31-36.

Kumar, Ramesh A V and Balasubramaniam, R (1999) Delhi iron pillar rust characterization by mossbauer spectroscopy analysis. NML Technical Journal, 40 (2). pp. 57-61.

Kumar, Randhir and Poddar, Palash and Pushp, P T and Sahoo, K L (2008) Strain Induced Melt Activation (SIMA) - A New Challenging Manufacturing Process for Automotive Applications. Indian Foundry Journal, 54(3) . pp. 35-39.

Kumar, Ranjeet and Gokhale, A and Varma, Anand and Kumar, Y R and Neelakantan, S and Jain, Jayant (2023) Role of Nb (C, N) and Cr carbides on the fracture behavior of Super304H steel using in-situ tensile studies. Materials Letters, 351 .

Kumar, Ranjeet and Halder, Prahlad and Amrithalingam, Murugaiyan and Yuvraj, N and Varma, A and Kumar, Y R and Neelakantan, S and Jain, Jayant (2023) Experimental and Numerical Analysis of Residual Stresses in Similar and Dissimilar Welds of T91 and Super304H Steel Tubes. Journal of Materials Engineering and Performance .

Kumar, Ratnesh and Goel, Himanshi and Jha, S K and Kumar, Shailendra and Kant, Rama (2022) Single potential step chronoamperometry for EC' reaction at rough electrodes: Theory and experiment. Journal of Electroanalytical Chemistry, 905 .

Kumar, S and Das, S K and Daspoddar, P K (2004) Synthesis of mullite aggregates from fly ash: effect on thermomechanical behaviour of low cement castables. British Ceramic Transactions, 103 (4). pp. 176-180.

Kumar, S and Rao, B N and Pradhan, B (2007) Effect of impactor parameters and laminate characteristics on impact response and damage in curved composite laminates. Journal of Reinforced Plastics and Composites, 26 (13). pp. 1273-1290.

Kumar, Sanjay and Bandopadhyay, A and Alex, T C and Kumar, Rakesh (2006) Influence of mechanical activation on the synthesis and hydraulic activity of calcium dialuminate. Ceramics International, 32 (5). pp. 555-560.

Kumar, Sanjay and Bandopadhyay, A and Rajnikanth, V and Alex, T C and Kumar , Rakesh (2004) Improved processing of blended slag cement through mechanical activation. Journal of Materials Science, 39 (10). pp. 3449-3452.

Kumar, Sanjay and Das, S K and Das, U S and Daspoddar, P K (1995) Effect of synthetic aggregates on the high temperature strength properties of mixed calcium aluminates. NML Technical Journal, 37 (4). pp. 117-122.

Kumar, Sanjay and Das, Swapan K and Daspoddar, P K (2003) Thermo-mechanical behaviour of low cement castables derived from mullite aggregates synthesised from beach sand sillimanite. Ceramics International, 29 (2). pp. 139-144.

Kumar, Sanjay and Garcia-Trinanes, P and Teixeira-Pinto, A and Bao, M (2013) Development of alkali activated cement from mechanically activated silico-manganese (SiMn) slag. Cement & Concrete Composites, 40 . pp. 7-13.

Kumar, Sanjay and Kristaly, Ferenc and Mucsi, Gabor (2015) Geopolymerisation behaviour of size fractioned fly ash. Advanced Powder Technology, 26(1) (IF-1.300). pp. 24-30.

Kumar, Sanjay and Kumar, Rakesh (2014) Geopolymer : Cement for low carbon economy. The Indian Concrete Journal, 88(7) . pp. 29-37.

Kumar, Sanjay and Kumar, Rakesh (2011) Mechanical activation of fly ash: Effect on reaction, structure and properties of resulting geopolymer. Ceramics International, 37 (2). pp. 533-541.

Kumar, Sanjay and Kumar, Rakesh and Alex, T C and Bandopadhyay, A and Mehrotra, S P (2007) Influence of reactivity of fly ash on geopolymerisation. Advances in Applied Ceramics, 106 (3). pp. 120-127.

Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A (2006) Innovative methodologies for the utilisation of wastes from metallurgical and allied industries. Resources Conservation and Recycling, 48 (4). pp. 301-314.

Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A and Alex, T C and Ravi Kumar, B and Das, Swapan K and Mehrotra, S P (2008) Mechanical activation of granulated blast furnace slag and its effect on the properties and structure of portland slag cement. Cement and Concrete Composites, 30 (8). pp. 679-685.

Kumar, Sanjay and Kumar, Rakesh and Mehrotra, S P (2010) Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer. Journal of Materials Science, 45 (3). pp. 607-615.

Kumar, Sanjay and Mucsi, G and Kristaly, Ferenc and Pekker, P (2017) Mechanical activation of fly ash and its influence on micro and nano-structural behaviour of resulting geopolymers. Advanced Powder Technology, 28(3) (IF-2.659). pp. 805-813.

Kumar, Sanjay and Sahoo, D P and Nath, S K and Alex, T C and Kumar, Rakesh (2012) From Grey Waste to Green Geopolymer. Science and Culture, 78(11-12) . pp. 511-516.

Kumar, Sanjay and Singh, K K and Ramachandrarao, P (2001) Effects of fly ash additions on the mechanical and other properties of porcelainised stoneware tiles. Journal of Materials Science, 36 (24). pp. 5917-5922.

Kumar, Sanjay and Singh, K K and Ramachandrarao, P (2000) Synthesis of cordierite from fly ash and its refractory properties. Journal of Materials Science Letters, 19 (14). pp. 1263-1265.

Kumar, Sujeet and Djobo, J N Y and Kumar, Anil and Kumar, Sanjay (2020) Size fractionation of brown fly ash: utilisation of grey fraction as a pozzolanic material in blended cement. European Journal of Environmental and Civil Engineering , 24(6) . pp. 833-848.

Kumar, Sujeet and Djobo, Jean NoëlYankwa and Kumar, Anil and Kumar, Sanjay (2016) Geopolymerization behavior of fine iron-rich fraction of brown fly ash. Journal of Building Engineering, 8 (IF-1.055). pp. 172-178.

Kumar, Sunil (2017) Effect of applied force and atomic organization of copper on its adhesion to a graphene substrate. RSC Advances, 7(40) (IF-3.108). pp. 25118-25131.

Kumar, Sunil (2017) Graphene engendered 2-D structural morphology of aluminium atoms: Molecular dynamics simulation study. Materials Chemistry and Physics, 202 (2.084). pp. 329-339.

Kumar, Sunil (2018) Graphene Engendered aluminium crystal growth and mechanical properties of its composite: An atomistic investigation. Materials Chemistry and Physics, 201 (IF-2.084). pp. 41-48.

Kumar, Sunil (2018) Spreading and orientation of silver nano-drop over a flat graphene substrate: An atomistic investigation. Carbon, 138 (IF-7.082). pp. 26-41.

Kumar, Sunil (2020) Structural Evolution of Iron–Copper (Fe–Cu) Bimetallic Janus Nanoparticles during Solidification: An Atomistic Investigation. The Journal of Physical Chemistry C, 124 (IF-4.309). pp. 1053-1063.

Kumar, Sunil (2018) Wettability and Structural Evolution of Gold over a Single-Walled Carbon Nanotube: An Atomistic Investigation. The Journal of Physical Chemistry C, 122 (IF-4.484). pp. 16346-16355.

Kumar, Sunil and Das, Suchandan K (2018) Characterization of mechanical properties and nano-porous structure of Aluminium-Magnesium alloy during multi-axial tensile deformation: An atomistic investigation. Journal of Alloys and Compounds, 740 (IF-3.133). pp. 626-638.

Kumar, Sunil and Das, Suchandan K (2017) A triaxial tensile deformation-induced nanoporous structure of aluminium: estimation of surface area, solid volume, and dimensionless aspect ratio. Physical chemistry chemical physics, 19(31) (IF-4.123). pp. 21024-21032.

Kumar, Sunil and Das, Suchandan K and Pattanayek, S K (2018) Evolution of nanostructure and mechanical properties of silver nano-particle in the confined region between graphene sheets: An atomistic investigation. Computational Materials Science, 152 (2.292). pp. 393-407.

Kumar, Sunil and Mandal, G K and Rajnikanth, V and Misra, S and Ghosh Chowdhury, S and Srivastava, V C (2018) Effect of cooling media on microstructure and mechanical properties of Nb/Ti containing microalloyed steel. Journal of Metallurgy and Materials Science, 60(1) . pp. 1-12.

Kumar, Sunil and Mishra, T (2020) Shock wave induced exfoliation of molybdenum disulfide (MoS2) in various solvents: All-atom molecular dynamics simulation. Journal of Molecular Liquids, 314 (5.065). p. 113671.

Kumar, Sunil and Mishra, T and Mahata, Avik (2020) Manipulation of mechanical properties of monolayer molybdenum disulfide: Kirigami and hetero-structure based approach. Materials Chemistry and Physics, 252 (IF-3.408). p. 123280.

Kumar, Sunil and Mishra, Trilochan and Sahu, Ranjan K (2022) Mechanical-load and temperature-engendered degradation of α-CsPbI3: reactive molecular dynamics simulation. Journal of Material Chemistry C, 10 (8.06). pp. 12091-12105.

Kumar, Sunil and Nandi, Sukalpan and Pattanayek, S K and Madan, M and Kaushik, B and Kumar, R and Krishna, K Gopala (2023) Atomistic characterization of multi nano-crystal formation process in Fe-Cr-Ni alloy during directional solidification: Perspective to the additive manufacturing. Materials Chemistry and Physics, 308 .

Kumar, Sunil and Pattanayek, S K (2019) Effect of Multiaxial Tensile Deformation on the Mechanical Properties of Semiflexible Polymeric Samples. The Journal of Physical Chemistry B, 123(43) . pp. 9238-9249.

Kumar, Sunil and Pattanayek, S K (2019) Force induced removal of an encapsulated semi-flexible polymer from single walled carbon nanotube. The Journal of Chemical Physics, 516 . pp. 22-27.

Kumar, Sunil and Pattanayek, S K and Das, S K (2019) Reactivity-Controlled Aggregation of Graphene Nanoflakes in Aluminum Matrix: Atomistic Molecular Dynamics Simulation. Journal of Physics Chemistry C, 123(29) . pp. 18017-18027.

Kumar, Sunil and Pattanayek, Sudip K. (2018) Semi-flexible polymer engendered aggregation/dispersion of fullerene (C60) nano-particles: An atomistic investigation. Chemical Physics Letters, 701 (1.815). pp. 22-29.

Kumar, Sunil and Sahu, Ranjan K (2023) Aluminum nanotubes as an efficient catalyst for hydrogen production via thermochemical water splitting: a reactive molecular dynamics simulation. Physical Chemistry Chemical Physics .

Kumar, Sunil and Srivastava, V C and Mandal, G K and Pattanayek, S K and Sahoo, K L (2017) Single-Walled Carbon Nanotube Engendered Pseudo-1D Morphologies of Silver Nanowire. Journal of Physical Chemistry C, 121 (IF-4.536). pp. 20468-20480.

Kumar, Suranjit and Kale, Rahul P and Singh, Pawan K and Ghosh, M and Chattopadhyay, J (2021) Fracture toughness behavior of dissimilar metal (SA508 Gr.3 Class 1 and SA312 Type 304LN) weld joint: With and without stress relieving treatment. Fatigue & Fracture of Engineering Materials and Structures, online .

Kumar, Sushil and Prasad, Sanjay and Udayabhanu, G (2004) Studies on some aspects of extraction of nickel from laterite ore. Journal of Metallurgy and materials Science, 46 (1). pp. 39-49.

Kumar, Sushil and Udayabhanu, G and Godiwalla, K M (2003) Chemical composition and mineralogical characterization of fly ash from Bokaro Thermal Power Station, India. Journal of Metallurgy and materials Science., 45 (1). pp. 55-59.

Kumar, U and Das Chakraborty, S and Sahu, Ranjan K and Bhattacharya, P and Mishra, T (2021) Improved Interfacial Charge Transfer on Noble Metal-Free Biomimetic CdS-Based Tertiary Heterostructure @ 2D MoS2-CdS-Cu2O with Enhanced Photocatalytic Water Splitting. Advanced Materials Interfaces .

Kumar, Vinay (1990) Filtration Studies of the Ammoniacal Leach Slurry of Polymetallic Sea Nodules. Indian Chemical Engineer, 32 (2). pp. 64-69.

Kumar, Vinay and Bagchi, D and Pandey, B D (2006) Extraction of zinc-cobalt from sulphate solution of cobalt cake by D2EHPA in the processing of indian ocean nodules. Minerals Processing, 77 (5). pp. 299-304.

Kumar, Vinay and Bagchi, D and Pandey, B D (2007) hydrometallurgical recovery of copper and nickel powders from the copper bleed solution of indian sea nodules. Korea on Minerals and Materials Processing and Utilization, 11 (1). pp. 56-63.

Kumar, Vinay and Bagchi, D and Pandey, B D (1997) Separation of copper and zinc from complex sulphate solutions by using LIX84. Scandinavian Journal of Metallurgy, 26 (2). pp. 74-78.

Kumar, Vinay and Bagchi, D and Pandey, B D and Jana, R K and Premchand, (1996) Role of impurities in solvent extraction-electrowinning of copper and nickel for the processing of sea nodules. Transactions of the Indian Institute of Metals, 49 (6). pp. 753-760.

Kumar, Vinay and Grover, Prem D (1991) Catalyst Evaluation for the Vapor-Phase Oxidation of p -Xylene. Industrial & Engineering Chemistry Research, 30 (6). pp. 1139-1141.

Kumar, Vinay and Hosmani, Santosh S (2011) The effect of temperature and cooling-rate on packcarburized iron. Journal of Metallurgy and Materials Science, 53 (4). pp. 393-404.

Kumar, Vinay and Jana, R K and Jha , D and Nayak, A K and Bagchi, D and Akerkar, D D (1987) Recovery of Copper, Nickel and Cobalt from Ammoniacal Leach Liquors Obtained by Direct Ammonia Leaching of Sea Nodules. Transactions of the Indian Institute of Metal, 40 (1). pp. 64-70.

Kumar, Vinay and Jha, Manis K and Kumar, Manoj and Jeong, Jinki and Lee, Jae-chun (2010) Extraction of copper from sulfate leach solution containing minor metallic constituents in mixer settler unit. EPD Congress (TMS) . pp. 413-420.

Kumar, Vinay and Kumar, Manoj and Bagchi, D and Jha, Manis K and Jeong, Jinki and Lee, Jae-chun (2007) Solvent Extraction Studies for Removal of Hazardous Metals from the Sulfate Leach Solution of Electronic Wastes. Proceedings of International Symposium of resource recycling . pp. 138-143.

Kumar, Vinay and Kumar, Manoj and Jha, Manis K and Jeong, Jinki and Lee, Jae-chun (2009) Solvent extraction of cadmium from sulfate solution with di-(2-ethylhexyl) phosphoric acid diluted in kerosene. Hydrometallurgy, 96 (3). pp. 230-234.

Kumar, Vinay and Kumar, Manoj and Jha, Manis K and Lee, Jae-chun (2009) Extraction and separation of metals using LIX 84 AND D2EHPA diluted in kerosene from sulfate solution. Proceedings of EPD on Mineral, Metal and Materials Society . pp. 1089-1094.

Kumar, Vinay and Nayak, A K (1987) Chemistry of Vanadium Extraction from Titaniferrous Magnetite Ore. Chemical Engineering, 22 (5). pp. 93-95.

Kumar, Vinay and Pandey, B D and Bagchi, D and Jana, R K and Agrawal, A and Premchand, (2000) Solvent extraction in the process of metal separation. Minerals & Metals Review, ( ). pp. 68-76.

Kumar, Vinay and Pandey, B D and Bagchi, D and Khan, Z H and Saha, A K and Bodas, M G (1997) Recovery of nickel from the ammoniacal solution of chromite ore overburden by solvent extraction-electrowinning. NML Technical Journal, 39 (3). pp. 129-141.

Kumar, Vinay and Pandey , B D and Bagchi, D (1991) Application of LIX 84 for Separation of Copper, Nickel and Cobalt in Ammoniacal Leaching of Ocean Nodules. Materials Transactions, Jim, 32 (2). pp. 157-163.

Kumar, Vinay and Sahu, S K and Pandey, B D (2010) Prospects for solvent extraction processes in the Indian context for the recovery of base metals. A review. Hydrometallurgy, 103 (1-4). pp. 45-53.

Kumar, Vinod (2016) Thermo-mechanical simulation using gleeble system - advantages and limitations. Journal of Metallurgy and Materials Science, 58(1) (IF- 0.04). pp. 81-88.

Kumar, Vinod and Jadhav, G N and Khosla, N K and Mehrotra, S P (2010) Implication of process mineralogy for beneficiation of low grade iron ore resources containing high alumina from eastern part of India. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 82-91.

Kumar, Vinod and Lee, Jae-chun and Jeong, Jinki and Jha, Manis K and Kim, Byung-Su and Singh, Ratnakar (2013) Novel physical separation process for eco-friendly recycling of rare and valuable metals from end-of-life DVD-PCBs. Separation and Purification Technology, 111 (IF-2.921). pp. 145-154.

Kumar, Vinod and Lee, Jae-chun and Jeong, Jinki and Jha, Manis K and Kim, Byung-Su and Singh, Ratnakar (2015) Recycling of printed circuit boards (PCBs) to generate enriched rare metal concentrate. Journal of Industrial and Engineering Chemistry, 21 (IF-2.145). pp. 805-813.

Kumar , Vinay and Pandey , B D and Akerkar, D D (1990) Electrowinning of Nickel in the Processing of Polymetallic Sea Nodules. Hydrometallurgy, 24 (2). pp. 189-201.

Kumaran, S and Raghu, T and Subramanian, R and Ramakrishnan, S S (2000) Characterisation of mechanically alloyed atomised AI-Ni-Ce-Zr alloy system. Journal of Metallurgy and materials Science, 42 (3). pp. 159-165.

Kumari, A and Tripathy, A and Mandre, N R (2021) Artificial neural network-based sensitivity analysis and experimental investigation of liquid-solid fluidization technique for low-grade coal upgradation. Journal of Dispersion Science and Technology .

Kumari, A and Tripathy, A and Mandre, N R (2021) Multi-response and Misplacement Optimization of Upgrading BMQ Ore in Liquid-Solid Fluidized Bed Separator Using Taguchi-based Grey Relational Analysis. Journal of Sustainable Metallurgy, 7(3) . pp. 1200-1223.

Kumari, A and Tripathy, A and Rayasam, V (2021) Performance characterization and misplacement studies of liquid-solid fluidized bed density separator for coal beneficiation using Taguchi-ANOVA method. Particulate Science and Technology, 39(4) . pp. 436-448.

Kumari, A and Tripathy, A K and Ramaswamy, V (2020) Performance characterization and misplacement studies of liquid–solid fluidized bed density separator for coal beneficiation using Taguchi-ANOVA method. Particulate Science &amp; Technology .

Kumari, Aarti and Dipali, Jha and Randhawa, N S and Sahu, S K (2021) Electrochemical treatment of spent NdFeB magnet in organic acid for recovery of rare earths and other metal values. Journal of Cleaner Production, 309 (7.246).

Kumari, Aarti and Raj, R and Randhawa, N S and Sahu, S K (2021) Energy efficient process for recovery of rare earths from spent NdFeB magnet by chlorination roasting and water leaching. Hydrometallurgy, 201 .

Kumari, Aarti and Sahu, K K and Sahu, S K (2019) Solvent Extraction and Separation of Nd, Pr and Dy from Leach Liquor of Waste NdFeB Magnet Using the Nitrate Form of Mextral (R) 336At in the Presence of Aquo-Complexing Agent EDTA. Metals, 9(2) . pp. 1-16.

Kumari, Aarti and Sahu, S K (2023) A comprehensive review on recycling of critical raw materials from spent neodymium iron boron (NdFeB) magnet. Separation and Purification Technology, 317 .

Kumari, Aarti and Sinha, Manish K and Sahu, S K and Pandey, B D (2016) Solvent Extraction and Separation of Trivalent Lanthanides Using Cyphos IL 104, a Novel Phosphonium Ionic Liquid as Extractant. Solvent Extraction and Ion Exchange, 34(5) (IF- 2.456). pp. 469-484.

Kumari, Aarti and Sinha, Manish K and Pramanik, Swati and Sahu, S K (2018) Recovery of rare earths from spent NdFeB magnets of wind turbine: Leaching and kinetic aspects. Waste Management, 75 (IF-4.030). pp. 486-498.

Kumari, Aarti and Sinha, Manish K and Sahu, S K and Panday, B D (2016) Investigation of a novel ionic liquid, Cyphos IL 104 for the solvent extraction of mineral acids. Hydrometallurgy, 165 (IF- 2.605). 159-165.

Kumari, Aayushi and Kedia, Priyanshu and Mandal, Eisha and Mandal, S K (2017) Flaw patterns characterization in material images using linear coorelation method. Journal of Metallurgy and Materials Science, 59(2) . pp. 67-74.

Kumari, Ajita and Vasumathi, N and Vijaya Kumar, T V (2023) Statistical analysis and optimization studies on recovery of carbon from steel plant sludge. Materials Today: Proceedings .

Kumari, Amrita and Das, Suchandan K and Srivastava, Prem Kumar (2016) Estimation of Scale Deposition in the Water Walls of an Operating Indian Coal Fired Boiler: Predictive Modeling Approach Using Artificial Neural Networks. Journal of The Institution of Engineers , 97(1) (IF- ). pp. 39-46.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2016) Computational Investigation of the Influence of Fly Ash Silica Content and Shape on the Erosion Behaviour of Indian Coal Fired Boiler Grade Steels. Journal of The Institution of Engineers (India): Series C, 97(3) . pp. 375-380.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2017) Data-driven modeling of corrosion and scale deposition rate in economizer. Anti-Corrosion Methods And Materials , 64(2) (IF-0.364). pp. 178-187.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2017) Data-driven modeling of fireside corrosion rate. Anti-corrosion methods and materials, 64(4) (IF-0.364). pp. 397-404.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2015) Estimation of Scale Deposition in the Water Walls of an Operating Indian Coal Fired Boiler: Predictive Modeling Approach Using Artificial Neural Networks. Journal of The Institution of Engineers (India) . pp. 2250-2122.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2016) Feed Water Chemistry-Related Corrosion Failures in Subcritical 250 MW Coal-Fired Boiler. Journal of Failure Analysis and Prevention , 16(4) (IF- 0.469). pp. 703-711.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2016) Modeling Fireside Corrosion Rate in a Coal Fired Boiler Using Adaptive Neural Network Formalism. Portugaliae Electrochimica Acta (IF-0.960).

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2014) A neural network model for quantitative prediction of oxide scale in water walls of an operating Indian coal fired boiler. Research and Review in Electrochemistry, 5(6) . pp. 155-168.

Kumari, Anita and Jana, R K (2011) Comparison of Leaching Rates of Metals in Presence of Different Buffering Agents in Sodium Chloride Media. International Journal of Chemical Engineering Research, 3 (3). pp. 171-179.

Kumari, Anita and Jana, R K (2011) Kinetic Study on Extraction of Valuable Metals in Sodium Chloride Solution with Organic Acid Addition. International Journal of Chemical Engineering Research, 3 (2). pp. 97-105.

Kumari, Anjan and Jha, Manis K and Lee, Jae-chun and Singh, Rajendra Prasad (2016) Clean process for recovery of metals and recycling of acid from the leach liquor of PCBs. Journal of Cleaner Production, 112( 5) (IF-3.844). pp. 4826-4834.

Kumari, Anjan and Jha, Manis K and Singh, R P (2016) Recovery of metals from pyrolysed PCBs by hydrometallurgical techniques. Hydrometallurgy, 165 (IF- 2.605). 97 -105 .

Kumari, Anjan and Jha, Manis K and Singh, R P and Ranganathan, S (2017) Investigation of the influence of inert and oxidizing atmospheres on the efficiency of decomposition of waste printed circuit boards (WPCBs). Heat and Mass Transfer, 53(4) (IF-1.233). pp. 1247-1255.

Kumari, Anjan and Kumari, Archana and Jha, Manis K and Kumar, Vinod and Singh, R P and Yoo, Kyoungkeun (2014) Copper recovery from small devices populated on waste printed circuit boards. Journal of Metallurgy and Materials Science,, 56(1) (NON-SCI). pp. 41-51.

Kumari, Anjan and Singh, Rajendra Prasad and Jha, Manis K and Kumar, Vinay (2013) Extraction of copper from small electronic devices populated on discarded PCBs. Journal of Indian Chemical Society , 90 . pp. 2121-2126.

Kumari, Anju and Singh, Ravinder and Goswami, N G (2016) Seasonal variation of heavy metals in Subarnarekha River at Jamshedpur, East Singhbhum, Jharkhand. Journal of Metallurgy and Materials Science, 58(3) (IF- 0.04). pp. 159-166.

Kumari, Archana and Choubey, Pankaj K and Gupta, Rajesh and Jha, Manis K (2021) Recovery of Lithium (Li) Salts from Industrial Effluent of Recycling Plant. Rare Metal Technology 2021 . pp. 91-100.

Kumari, Archana and Jha, Manis K and Hait, Jhumki and Sahu, S K and Kumar, Vinay (2013) Processing of Korean monazite concentrate for the recovery of rare earth metals (REMs). Journal of Indian Chemical Society, 90 . pp. 2105-2110.

Kumari, Archana and Jha, Manis K and Pathak, D D (2020) An innovative environmental process for the treatment of scrap Nd-Fe-B magnets. Journal of Environmental Management, 273 (IF-5.647). p. 111063.

Kumari, Archana and Jha, Manis K and Pathak, D D and Chakravarty, S and Lee, Jae-chun (2018) Processes developed for the separation of europium (Eu) from various resources. Separation & Purification Reviews - (formerly Separation and Purification Methods) (IF-4.212). pp. 1-31.

Kumari, Archana and Jha, Manis K and Pathak, D D and Chakravarty, S and Lee, Jae-chun (2019) Processes developed for the separation of europium (Eu) from various resources. Separation and Purification Reviews, 48(2) . pp. 91-121.

Kumari, Archana and Jha, Manis K and Yoo, Kyoungkeun and Panda, Rekha and Lee, J Y and Kumar, J Rajesh and Pathak, D D (2019) Advanced process to dephosphorize monazite for effective leaching of rare earth metals (REMs). Hydrometallurgy, 187 . pp. 203-211.

Kumari, Archana and Jha, S and Patel, J N and Chakravarty, S and Jha, Manis K and Pathak, D D (2018) Processing of monazite leach liquor for the recovery of light rare earth metals (LREMs). Minerals Engineering, Volume 129, December 2018, Pages 9-14 (IF-3.315). pp. 9-14.

Kumari, Archana and Panda, Rekha and Jha, Manis K and Kumar, J Rajesh and Lee, Jin Young (2015) Process development to recover rare earth metals from monazite mineral: A review. Minerals Engineering, 79 (IF-1.714). pp. 102-115.

Kumari, Archana and Panda, Rekha and Jha, Manis K and Lee, Jin-Young and Kumar, J Rajesh and Kumar, Vinay (2015) Thermal treatment for the separation of phosphate and recovery of rare earth metals (REMs) from Korean monazite. Journal of Industrial and Engineering Chemistry, 21 (IF-2.145). pp. 696-703.

Kumari, Archana and Panda, Rekha and Jha, Manis K and Pathak, D D (2018) Extraction of rare earth metals by organometallic complexation using PC88A. Comptes Rendus Chimie, 21(11) (IF-2.176). pp. 1029-1034.

Kumari, Archana and Panda, Rekha and Lee, J Y and Thriveni, Thenepalli and Jha, Manis K and Pathak, D D (2019) Extraction of rare earth metals (REMs) from chloride medium by organo-metallic complexation using D2EHPA. Separation and Purification Technology, 227 .

Kumari, Archana and Parween, R and Chakravarty, S and Parmar, Kavita and Pathak, D D and Lee, Jae-chun and Jha, Manis K (2019) Novel approach to recover rare earth metals (REMs) from Indian coal bottom ash. Hydrometallurgy, 187 . pp. 1-7.

Kumari, Archana and Singh, Sunidhi and Parmar, Kavita and Pathak, D D and Jha, Manis K (2020) Treatment of monazite processed effluent to recover rare earth metals (REMs). Journal of Industrial and Engineering Chemistry, 83 (IF-5.278). pp. 421-429.

Kumari, Beena and Madhukar, Anuradha and Chattoraj, Indranil (2020) E-Profiling R&D Involvement/Earnings of Researchers: A G2E Tool for Performance Management at CSIR-NML. International Journal of Productivity and Performance Management (previously Work Study), Online .

Kumari, Beena and Madhukar, Anuradha and Sahney, Sangeeta (2023) A R&D productivity model to achieve self-sustainability for public funded/CSIR R&D laboratories, India. Internation Journal of Productivity and Performance Management, A head of Print .

Kumari, Beena and Sahney, Sangeeta and Madhukar, Anuradha and Chattoraj , Indranil and Sinni, Shipra (2015) Involvement and productivity of research and development workers: A case study of a publicly-funded research laboratory. International Journal of Productivity and Performance Management (previously Work Study), 64/4 . pp. 567-589.

Kumari, Beena and Sahney, Sangeeta and Madhukar, Anuradha (2021) Aligning Individual and Organizational R&D Goals for Self-Sustainability: Investigating Preferences of Researchers in Selected CSIR-Laboratories, India. International Journal of Productivity and Performance Management .

Kumari, Beena and Sahney, Sangeeta and Madhukar, Anuradha (2018) Factors Influencing Productivity of Researchers: A Study of Select Public Sector R&D Laboratories in India. International Journal of Global Business and Competitiveness, 13/1 . pp. 75-98.

Kumari, D and Sheikh, L and Bhattacharya, S and Webster, T J and Nayar, S (2017) Two-dimensional collagen-graphene as colloidal templates for biocompatible inorganic nanomaterial synthesis. International Journal of Nanomedicine, 12 (IF-4.300). pp. 3605-3616.

Kumari, K and Prasad, K and Yadav, K L and Sen, S (2009) Structural and Dielectric Properties of ZrO2 Added (Na1/2Bi1/2)TiO3 Ceramic. BRAZILIAN JOURNAL OF PHYSICS , 39 (2). pp. 297-300.

Kumari, Mamta and Prasad, J N (2008) Analysis of optimized sierpinski carpet (SC) fractal antenna and estimation of EMI. Journal of Metallurgy and Materials Science, 50 (4). pp. 235-243.

Kumari, S and Panda, A K and Mitra, A and Datta, J and Chattoraj, I (2006) Effect of hydrogen on the magnetic behavior of CoFeCrSiB amorphous. Journal of Materials Science, 41 (17). pp. 5510-5513.

Kumari, Seema and Chattoraj, I and Pal, S K and Mitra, A (2006) Study of Giant Magneto-Impedance Behavior in Co–Fe Based Amorphous/Nanocrystalline Materials. Materials and Manufacturing Processes, 21 . pp. 683-686.

Kumari, Seema and Chattoraj, I and Panda, A K and Mitra, A and Pal, S K (2006) Effect of Fe addition on the magnetic and giant magneto-impedance behaviour of CoCrSiB rapidly solidified alloys. Journal of Physics D: Applied Physics, 39 . pp. 2001-2006.

Kumari, Smita and Singh, Saurabh Kumar and Kumar, Brajesh (2013) Rapid microwave digestion procedures for the elemental analysis of alloy and slag samples of smelted ocean bed polymetallic nodules. Journal of Chemistry, ISSN 2090-9063 - Open Source Journal (IF-0.484). pp. 1-6.

Kumari, Sneha and Roy, T and Chakladar, S and Kumar, Alok and Arif, Md and Mohanty, Ashok and Kundu, Rajen and Chakravarty, S (2023) Distribution, mode of occurrence, and significance of rare-earth elements in coal from Samaleswari open cast coal blocks, Odisha, India with their provenance and paleodepositional environment. Environmental Earth Sciences, 82(5) .

Kumari, Suruchi and Panda, A K and Prasad, Ranjit and Alorro, R D and Jha, Manis K (2024) Sustainable Process to Recover Metals from Waste PCBs Using Physical Pre-Treatment and Hydrometallurgical Techniques. Sustainability , 16(1) .

Kumari , Archana and Choubey, Pankaj K and Gupta, Rajesh and Jha, Manis K (2022) Recovery of Lithium (Li) Salts from Industrial Effluent of Recycling Plant. The Minerals, Metals & Minerals Society 2021 .

Kundu, B and Balla, V K and Muraleedharan, K (2020) Technology glimpse of bioceramic implants developed by CSIR-CGCRI, Kolkata. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 49-57.

Kundu, Rajen and De, Suranjan (2021) Characterization and analysis of the triglyceride transesterification process. Biomass Conversion and Biorefinery (4.987).

Kundu, Rajen and Mahada, Pushpa and Chhirang, Bhawna and Das, Bappaditya (2022) Cellulose hydrogels: Green and sustainable soft biomaterials. Current Research in Green and Sustainable Chemistry .

Kundu, Rajen and Payal, Priyanka (2021) Biodegradation Study of Potato Starch-Based Bioplastic. Current Chinese Chemistry, 2(2) . e190421192895.

Kundu, Sayandeep and Maladkar, R and Singh, Ak and Hussain, M M (2016) Role of precipitate in strain induced martensitic transformation during cold deformation of SS 321. Journal of Metallurgy and Materials Science, 58(1) (IF- 0.04). pp. 35-46.

Kundu, Sudip and Sadhukhan, P (2015) Design and implementation of a time synchronization-free distributed localization scheme for underwater acoustic sensor network. Applications and Innovations in Mobile Computing (AIMoC), 2015 . pp. 74-80.

Kundu, Sukumar and Ghosh, M and Chatterjee, S (2006) Diffusion bonding of commercially pure titanium and 17-4 precipitation hardening stainless steel. Materials Science and Engineering A, 428 (1-2). pp. 18-23.

Kundu, Sukumar and Ghosh, M and Laik, A and Bhanumurthy, K and Kale, G B and Chatterjee, S (2005) Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. Materials Science and Engineering A, 407 (1-2). pp. 154-160.

Kurniawan, M and Roy, Rajat K and Panda, A K and Greve, D W and Ohodnicki, P R and McHenry, Michael E (2014) Interplay of stress, temperature, and giant magnetoimpedance in amorphous soft magnets. Applied Physics Letters, 105 (22) (IF-3515). p. 222407.

Kurusta, Tamas and Mucsi, G and Kumar, Sanjay and Kristaly, Ferenc (2023) Carbon dioxide sequestration by mechanical activation of Linz-Donawitz steel slag; the effect of water on CO2 capture. Fuel, 352 .

Kushwaha, A and Sharma, A and Bhatt, B B and Mukhopadhyay, Amartya and Gupta, D (2023) Inkjet-Printed Graphene-Modified Aluminum Current Collector for High-Voltage Lithium-Ion Battery. ACS Applied Energy Materials .

Lagashetty, Arun Kumar and Bedree, Mahesh and Venkataraman, A (2010) Adsorption study of Pb+2 ions on nanoceramics. Journal of Metallurgy and Materials Science, 52 (4). pp. 357-362.

Lagashetty , A K and Ganiger, S K (2018) Microwave-assisted synthesis, characterisation and thermal study of nano sized metal aluminates. Journal of Metallurgy and Materials Science, 60(3) . pp. 139-148.

Lagutkin, S and Achelis, L and Sheikhaliev, S and Uhlenwinkel, V and Srivastava, V C (2004) Atomization process for metal powder. Materials Science and Engineering A, 383 . pp. 1-6.

Lahiri, A K (2013) Failure of drain valve reducer in de-sulfurisation unit. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 257-270.

Lahiri, A K and Banerjee, N G and Banerjee, T (1963) Dissolution of steel and absorption of hydrogen by steel during acid pickling in presence of inhibitor. NML Technical Journal, 5 (2). pp. 33-37.

Lahiri, A K and Banerjee, T (1959) Cavitation Erosion-A case of conjoint action. NML Technical Journal, 1 (2). pp. 38-40.

Lahiri, A K and Banerjee, T (1968) Electrochemical factors in the stress corrosion cracking of Cu alloys containing Zn and Mn. Corrosion Science, 8 (12). pp. 895-905.

Lahiri, A K and Banerjee, T (1965) Stress corrosion cracking of copper-manganese alloy. Corrosion Science, 5 (10). 731- .

Lahiri, A K and Banerjee, T and Nijhawan, B R (1967) Some observations on ancient iron. NML Technical Journal, 9 (2). pp. 32-33.

Lahiri, A K and Banerjee, T and Nijhawan, B R (1963) Some observations on corrosion resistance of ancient Delhi Iron Pillar and present time Adivasi Iron made by primitive methods. NML Technical Journal, 5 (1). pp. 46-54.

Lahiri, A K and Banerjee, T and Nijhawan, B R (1965) Some observations on the effect of heat treatment on stress corrosion cracking of Hardenable Steel. NML Technical Journal, 7 (2). pp. 20-27.

Lahiri, A K and Bhakta, U C (1971) Cracking of Brass Tubes in Sugar Juice Evaporators - A Case Study. NML Technical Journal, 13 (4). pp. 109-110.

Lahiri, A K and Mukherjee, K P and Rao, Addanki S and Banerjee, T (1967) Studies on properties of rust formed during atmospheric corrosion. NML Technical Journal, 9 (4). pp. 24-30.

Lahiri, R N (1980) Distillation of zinc .1. Vacuum distillation of zinc. Transactions of the Indian Institute of Metals, 33 (4). pp. 323-326.

Lakshmi Kruthika, N and Bhaskar Raju, G and Prabhakar, S (2013) Degradation of Tannic Acid Using Tio2 Nanotubes as Electrocatalyst. International Journal of Nanoscience (ijn) . pp. 481023-481031.

Lakshmipathiraj, P and Bhaskar Raju, G and Basariya, M R and Parvathy, S and Prabhakar, S (2008) Removal of Cr (VI) by electrochemical reduction. Separation and Purification Technology, 60 (1). pp. 96-102.

Lakshmipathiraj, P and Bhaskar Raju, G and Sakai, Y and Takuma, Y and Yamasaki, A and Kato, S and Kojima, T (2012) Studies on electrochemical detoxification of trichloroethene (TCE) on Ti/IrO2–Ta2O5 electrode from aqueous solution. Chemical Engineering Journal , 198-199 . pp. 211-218.

Lakshmipathiraj, P and Narasimhan, B R V and Prabhakar, S and Bhaskar Raju, G (2006) Adsorption of arsenate on synthetic goethite from aqueous solutions. Journal of Hazardous Materials, 136 (2). pp. 281-287.

Lakshmipathiraj, P and Narasimhan, B R V and Prabhakar, S and Bhaskar Raju, G (2006) Adsorption studies of arsenic on Mn-substituted iron oxyhydroxide. Journal of Colloid and Interface Science, 304 (2). pp. 317-322.

Lakshmipathiraj, P and Prabhakar, S and Bhaskar Raju, G (2010) Studies on the electrochemical decontamination of wastewater containing arsenic. Separation and Purification Technology, 73 . pp. 114-121.

Lakshmipathiraj, P and Umamaheswari, S and Bhaskar Raju, G and Prabhakar, S and Caroling, G and Kota, S and Kojima, T (2013) Studies on adsorption of Cr(VI) onto Strychnos potatorum seed from aqueous solution. Environmental Progress and Sustainable Energy, 32(1) . pp. 35-41.

Lal, Keemti and Malhotra, Sita Rani (1980) Spectrophotometric studies of chelates of iron (III) with 3-Bromo-2-hydroxy, Methylaceptophenon hydrozone (BHMAH). NML Technical Journal, 22 (3-4). pp. 41-42.

Lal, Kishori and Bhattamishra, A K (1990) Studies on Structural Degradation of Aluminium/Alloy Conductor in L.T. Line in Coastal Regions. NML Technical Journal, 32 (1-4). pp. 3-10.

Lal, Kishori and Bhattamishra, A K and Nair, G G and Mukherjee, S P and Halder, B N and Kumar, Rajendra (1987) Failure of lead-antimony alloy sheathing for tele-communication cables during extrusion - a case-study. Transactions of the Indian Institute of metals, 40 (6). pp. 537-543.

Lal, Kishori and Kumar, Rajendra (1974) Degassing of Aluminium & Its Alloys. NML Technical Journal, 16 (4). pp. 49-56.

Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S (1992) Studies on Microstructure of Rapidly Solidified Aluminium-Transition metal Alloys with Misch Metal Addition. NML Technical Journal, 34 (1-2). pp. 18-26.

Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S (1992) Thermal-properties of lead and graphite dispersed rheocast aluminum silicon alloys by laser flash technique. Materials Transactions JIM, 33 (9). pp. 811-815.

Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S and Jain, K B (1991) Microstructure-property correlation in indigenously produced zinc-aluminum foundry alloys. Materials transactions, 32 (7). pp. 621-625.

Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S and Jain, K B (1991) Quality Improvement of Zn-AI Foundry Alloys through Melt Treatment. NML Technical Journal, 33 (3-4). pp. 3-9.

Lal, Kishori and Singh, Inder and Bhattamishra, A K and Kumar, Rajendra (1987) Characterization and selection of aluminum-alloy boomerang grab for sea nodules collection - a case-study. Transactions of the Indian Institute of metals, 40 (1). pp. 7-12.

Lal, S M and Ram, Mohan and Gundewar, C S (2013) Characterization and beneficiation of BHQ from Karnataka. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 323-327.

Lalitha, S and Chattopadhyay, S and Das, Suchandan K and Godiwalla, K M (1991) Simulation of heat-transfer in the continuous-casting mold. Transactions Of The Indian Institute Of Metals , 44 (1). pp. 89-92.

Lalitha, S and Chattopadhyay, S and Ghosh, R N (1990) Development of software on finite-element mesh generation (meshgen) for metallurgical applications. Engineering Fracture Mechanics, 36 (3). pp. 527-530.

Lee, Jae-chun and Jha, Manis K and Panda, Rekha and Choubey, Pankaj K and Kumari, Archana and Kim, T G (2021) Developing Feasible Processes for the Total Recycling of WEEE to Recover Rare Metals. Rare Metals Technology . pp. 197-209.

Lee, Jae-chun and Jha, Manis K and Panda, Rekha and Choubey, Pankaj K and Kumari, Archana and Kim, Tai Gyun (2021) Developing Feasible Processes for the Total Recycling of WEEE to Recover Rare Metals. Rare Metal Technology 2021 . pp. 197-209.

Lee, Jae-chun and Jha, Manis K and Panda, Rekha and Choubey, Pankaj K and Kumari , Archana and Kim, Tai Gyun (2021) Developing Feasible Processes for the Total Recycling of WEEE to Recover Rare Metals. Rare Metal Technology 2021 .

Lee, Jae-chun and Kim, Eun-young and Kim, Ji-Hye and Kim, Wonbaek and Kim, Byung-Soo and Pandey, B D (2011) Recycling of WC–Co hardmetal sludge by a new hydrometallurgical route. International Journal of Refractory Metals and Hard Materials, 29 (3). pp. 365-371.

Lee, Jae-chun and Kurniawan, K and Kim, Soo-kyoung and Nguyen, Viet Tu and Pandey, B D (2022) Ionic Liquids-Assisted Solvent Extraction of Precious Metals from Chloride Solutions. Separation and Purification Reviews .

Lee, Jae-chun and Pandey, B D (2012) Bio-processing of solid wastes and secondary resources for metal extraction – A review. Waste Management, 32 . pp. 3-18.

Lee, Jin-Young and Jha, Amrita Kumari and Kumari, Archana and Kumar, J Rajesh and Jha, Manis K and Kumar, Vinay (2011) Neodymium recovery by precipitation from synthetic leach liquor of concentrated rare earth mineral. Journal of Metallurgy and Materials Science, 53 (4). pp. 349-354.

Lee, Sang-hun and Yoo, Kyoungkeun and Jha, Manis K and Lee, Jae-chun (2015) Separation of Sn from waste Pb-free Sn–Ag–Cu solder in hydrochloric acid solution with ferric chloride. Hydrometallurgy, 157 (IF-1.933). pp. 184-187.

Lendave, S A and Karande, V S and Deskmukh, L P (2010) Structural and transport characteristics of HgxCd1-xS thin composite films : A correlation. Journal of Metallurgy and Materials Science, 52 (4). pp. 363-370.

Li, X and Jiao, F and Al-Samman, T and Ghosh Chowdhury, S (2012) Influence of second-phase precipitates on the texture evolution of Mg–Al–Zn alloys during hot deformation. Scripta Materialia, 66 (3-4). pp. 159-162.

Lloyd, H K and Oxlee, C H (1966) The influence of aluminium and iron additions on copper-manganese-zinc alloys. NML Technical Journal, 8 (1). pp. 39-44.

Lunn, D C F (1977) On load corrosion in power generation. NML Technical Journal, 19 (1). pp. 15-20.

Madge, S V and Caron, A and Gralla, R and Wilde, G and Mishra, Suman K (2014) Novel W-based metallic glass with high hardness and wear resistance. Intermetallics, 47 (IF-1.696). pp. 6-10.

Madge, S V and Louzguine, D V and Inoue, A and Greer , A L (2013) Large Compressive Plasticity in a La-Based Glass-Crystal Composite. Metals, 3(1) (IF-). pp. 41-48.

Madge, S V and Louzguine, D V and Kawashima, A and Greer , A L and Inoue, A (2016) Compressive plasticity of a La-based glass-crystal composite at cryogenic temperatures. Material & Design, 101 (IF- 4.364). pp. 146-151.

Madge, S V and Louzguine, D V and Lewandowski, J J and Greer , A L (2012) Toughness, extrinsic effects and Poisson’s ratio of bulk metallic glasses. Acta Materialia, 60 . pp. 4800-4809.

Madhukar, A and Talukdar, P (2012) Melting point behavior of low dimensional systems. Journal of Metallurgy and Materials Science, 54(3) . pp. 203-207.

Magadevan, D and Dhivya, E and Mundari, N D A and Mishra, T and Aman, Noor (2019) Development of novel TiO2-Cu2(OH)PO4 heterojunction as nanophotocatalyst for improved Cr (VI) reduction. Journal of Environmental Chemical Engineering, 7(2) . p. 102968.

Mahanta, C R and Sahoo, P R and Mohanta, M K and Rath, R K and Dey, Shobhana and Tripathy, Sunil Kumar and Prasad, J and Venkatesh, Akella Satya (2023) Mineralogical Characteristics of Hematitic Iron Ore: A Geometallurgical Study on Ore from Eastern India. Minerals, 13(9) .

Mahanti, R K and Lal, Kishori and Sinha, A N and Sivaramakrishnan, C S (1993) A novel technique for hyper eutectic aluminum-silicon alloy melt treatment. Materials Transactions JIM, 34 (12). pp. 1207-1211.

Mahanti, R K and Lal, Kishori and Sinha, A N and Sivaramakrishnan, C S (1993) Novel technique for hyper eutectic aluminum-silicon alloy melt treatment. Materials Transactions Jim, 34 (12). pp. 1207-1211.

Mahanty, B and Das, D and Choudhary, B N (2018) Production of activated carbon from low grade coal and its role as effective adsorbent to control pollution. Journal of Metallurgy and Materials Science, 60(4) . pp. 229-243.

Mahanty, M S and Dey, T C and Srinivasan, S R and Bhatnagar, P P (1967) Recovery of vanadium from Bayer process liquors, Part I-Utilisation of sodium complex salt. NML Technical Journal, 9 (4). pp. 9-11.

Mahanty, M S and Misra, R N and Bhatnagar, P P (1968) Studies on the extraction of nickel from a low-grade nickel-ferrous ore from Rajasthan. NML Technical Journal, 10 (1). pp. 15-17.

Mahapatra, A K S and Dhananjayan, N (1981) Electrophoretic deposition of silicon-carbide. Transactions of the Indian Institute of metals, 34 (6). pp. 495-500.

Mahapatra, A K S and Goswami, M C and Gupta, K N (1991) Evaluation of Physico Chemical Characteristics of some Indian Iron Ores and Sinters. NML Technical Journal, 33 (1-2). pp. 9-16.

Mahapatra, A K S and Goswami, M C and Gupta, K N (1991) Evaluation of physico-chemical characteristics of some Indian iron ores and sinters. NML Technical Journal, 33 (1). pp. 9-16.

Mahapatra, A K S and Goswami, M C and Prakash, S and Singh, K K (1996) Quality of coke for high PCR blast furnace process-Some images. NML Technical Journal, 38 (4). pp. 161-167.

Mahato, B and Sahu, T and Shee, S K and Sahu, Puspendu and Sawaguchi, Takahiro and komi, J and Karjalainen, L P (2017) Simultaneous twinning nucleation mechanisms in an Fe–Mn–Si–Al twinning induced plasticity steel. Acta Materialia, 132 (IF-5.301). 264-275.

Mahato, B and Shee, S K and Sahu, T and Ghosh Chowdhury, S and Sahu, Puspendu and Porter, D A and Karjalainen, L P (2015) An effective stacking fault energy viewpoint on the formation of extended defects and their contribution to strain hardening in a Fe-Mn-Si-Al twinning-induced plasticity steel. Acta Materialia, 68 (IF-2.380). pp. 69-79.

Mahato, D K and Chaudhary, R K and Bhattamishra, A K and Srivastava, S C (2004) Synthesis and characterization of some PLNZT ceramics. Journal Of Materials Science-Materials In Electronics, 15 (9). pp. 575-578.

Mahato, D K and Chaudhary, R K and Das , N N and Srivastava, S C (2003) Thermal behaviour of spray dried PZT and PLNZT powders. Indian Journal Of Pure & Applied Physics , 41 (10). pp. 767-770.

Mahato, D K and Chaudhary, R K and Mohanta, M K and Srivastava, S C (2001) Phase characterisation of PZT type ceramics prepared by spray drying technique. Journal of Metallurgy and Materials Science, 43 (3). pp. 197-202.

Mahato, D K and Chaudhary, R K and Srivastava, S C (2005) Dielectric behaviour of spray dried Pb0.98(La1−x/3Nax)0.02(Zr0.53Ti0.47)0.9950O3 system. Journal of Materials Science, 40 (2). pp. 381-386.

Mahato, D K and Chaudhary, R K and Srivastava, S C (2003) Effect of Na on microstructure, dielectric and piezoelectric properties of PZT ceramic. Journal of Materials Science Letters, 22 (22). pp. 1613-1615.

Mahato, D K and Chaudhary, R K and Srivastava, S C (2002) Sintering, microstructureandsome dielectric properties of spray dried PLNZT ceramics. Journal of Metallurgy and materials Science., 44 (2). pp. 103-107.

Mahato, M M (2018) The influence of alloying elements on properties of centrifugally cast high-speed steel rolls. Journal of Metallurgy and Materials Science, 60(1) . pp. 49-62.

Mahato, M M and Agrawal, M K and Sinha, S N (2013) Production of low sulphur spheroidal graphite pig iron in mini blast furnace by optimising slag. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 201-208.

Mahato, P and Banerjee, P and Murmu, Manilal and Hirani, Harish and Murmu, N C and Mishra, Suman K (2021) Investigation on Multifunctional Properties of Sputtered Ti-Si-B-C Coating with Varied Thickness over Targeted Surface. Journal of Materials Engineering and performance .

Mahato, P and Mishra, Suman K (2019) A prolonged exposure of Ti-Si-B-C nanocomposite coating in 3.5 wt% NaCl solution: Electrochemical and morphological analysis. Surface and Coatings Technology, 375 . pp. 477-488.

Mahato, P and Murmu, Manilal and Banerjee, P and Mishra, S K (2022) Magnetron sputtered films prepared from sintered Ti-based target and evaluation of tribological properties under the ball on disc condition with varying thickness and load. Journal of Adhesion Science and Technology .

Mahato, P and Nyati, G and Singh, R J and Mishra, Suman K (2016) Nanocomposite TiSiBC Hard Coatings with High Resistance to Wear, Fracture and Scratching. Journal of Materials Engineering and Performance, 25(9) (IF-1.331). pp. 3774-3782.

Mahato, P and Singh, R J and Mishra, Suman K (2016) Nanocomposite Ti-Si-B-C hard coatings deposited by magnetron sputtering: Oxidation and mechanical behaviour with temperature and duration of oxidation. Surface & Coatings Technology, 288 (IF- 2.589). pp. 230-240.

Mahato, P and Singh, R J and Pathak, L C and Mishra, Suman K (2016) Effect of nitrogen on mechanical, oxidation and structural behaviour of Ti–Si–B–C–N nanocomposite hard coatings deposited by DC sputtering. Surface and Interface Analysis, 48(10) (IF- 1.132). pp. 1080-1089.

Mahato, R Raman and Bhattamishra, A K and Singh, R and Jayakrishnan, P (2001) Corrosion behaviour of painted HSLA panels in chloride environment – a comparative study of different paints. Anti-Corrosion Methods and Materials, 48 (3). pp. 188-194.

Mahato, R Raman and Jayakrishnan, P and Bhattamishra, A K and Singh, Ratnakar (2001) Corrosion behaviour of painted HSLA panels in chloride environment a comparative study of different paints. Anti-Corrosion Methods and Materials , 48 (3). pp. 188-193.

Mahere, Vishesh and Nigam, S P (2006) Identification of Isomorphism and Structural Properties of Kinematic chains with the help of Adjacency matrices. Journal of Metallurgy and Materials Science, 48 (1). pp. 31-44.

Maheswari, N and Ghosh Chowdhury, S and Kumar, K C Hari and Sankaran, S (2014) Influence of alloying elements on the microstructure evolution and mechanical properties in quenched and partitioned steels. Materials Science and Engineering A, 600 (IF- 2.409). pp. 12-20.

Maity, S and Chakravarty, S and Bhattacharjee, S and Roy, B C (2005) A study on arsenic adsorption on polymetallic sea nodule in aqueous medium. Water Research, 39 (12). pp. 2579-2590.

Maity, S and Chakravarty, S and Thakur, P and Gupta, K K and Bhattacharjee, S and Roy, B C (2004) Evaluation and standardisation of a simple HG-AAS method for rapid speciation of As(III) and As(V) in some contaminated groundwater samples of West Bengal, India. Chemosphere - Global Change Science, 54 (8). pp. 1199-1206.

Maity, S K and Ballal, N B and Goldhahn, G and Kawalla, R (2008) Development of low alloy titanium and niobium microalloyed ultrahigh strength steel through electroslag refining. Ironmaking & Steelmaking, 35 (5). pp. 379-386.

Maity, S K and Ballal, N B and Goldhahn, G and Kawalla, R (2008) Development of low alloy ultrahigh strength steel. Ironmaking & Steelmaking, 35 (3). pp. 228-240.

Maity, S K and Ballal, N B and Goldhahn, G and Kawalla, R (2009) Development of Ultrahigh Strength Low Alloy Steel through Electroslag Refining Process. ISIJ International, 49 (6). pp. 902-910.

Maity, S K and Ballal, N B and Kawalla, R (2007) Development of process for thermo-mechanical treatment of ultrahigh strength steel prepared by electroslag refining. Ironmaking & Steelmaking, 34 (4). pp. 332-342.

Maity, S K and Ballal, N B and Kawalla, R (2006) Development of ultrahigh strength steel by electroslag refining: Effect of inoculation of titanium on the microstructures and mechanical properties. ISIJ International, 46 (9). pp. 1361-1370.

Maity, S K and Rajak, A K and Chandra Shekhar, M and Singh, S D (2014) Development of 0.2C-CrMnMoV Ultra High Strength Steel. International Journal of Scientific Engineering and Technology, 3(2) . pp. 101-108.

Maity, S K and Rajak, A K and Shekhar, M Chander and Singh, S D (2016) Development of Ultra High Strength Steel by Electroslag Refining and Thermomechanical Treatment. Transations of the Indian Institute Metals, 69(3) (IF- 0.533). pp. 705-716.

Maity, S K and Shekhar, M Chandra and Ananth, V (2009) An exploratory study of electrodeposition of titanium using titanium dioxide carbon composite anode and molten aluminium cathode. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 118 (1). pp. 10-17.

Majee, B P and Mishra, A K (2020) Recent advances in photodetection applications of two dimensional MoS2 nanostructures. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 103-126.

Maji, Bikas Chand and Ray, R K and Madangopal, Krishan (2001) Evolution of texture and microstructure during deformation and annealing of Fe3AI based alloy. Journal of Metallurgy and materials Science, 43 (2). pp. 103-111.

Maji, K D (1982) Estimation of sulphur in synthetic slags for the studies of sulphur partition between pig iron and slags using radioactive tracer. NML Technical Journal, 24 (3-4). pp. 40-41.

Maji, K D (1974) Preferred orientation in extruded aluminum-alloy and aluminum rods. Indian Journal of Technology, 12 (9). pp. 391-394.

Maji, K D and Ramachandran, E G (1960) The direct evaluation of the effective camera radius in a Debye-Scherrer photograph. NML Technical Journal, 2 (4). pp. 22-23.

Maji, K D and Ramachandran, E G (1961) Pole figures for randomly oriented sheets of silicon and aluminium. NML Technical Journal, 3 (2). pp. 28-35.

Majumdar, J Dutta and Nath, A K and Ravi Kumar, B and Manna, I (2004) Studies on residual stress developed in laser surface irradiated 0.6% carbon steel. Optics and Lasers in Engineering, 14 (3-4). pp. 133-151.

Majumdar, Shrabani and Mohanty, O N (2001) Non-oriented electrical steel: An overview. Journal of Metallurgy and materials Science, 43 (2). pp. 43-56.

Makhija, Dilip and Rath, R K and Chakravarty, K and Patra, AS and Mukherjee, A K and Dubey, A K (2016) Phosphorus partitioning and recovery of low-phosphorus iron-rich compounds through physical separation of Linz-Donawitz slag. International Journal of Minerals Metallurgy and Materials, 23(7) (IF-0.943). pp. 751-759.

Makhija, Dilip and Rath, R K and Mukherjee, A K (2019) Application of enhanced gravity technique for separation of iron phase from LD slag. Metallurgical Research & Technology, 116(3) .

Malathi, M and Adekunle, Adeleke and Odusote, J K and Ikubannia, P P and Lasode, O A and Paswan, Dayanand (2020) The Ignitability, Fuel ratio and Ash Fusion Temperatures of Torrefied Woody Biomass. Heliyon, 6/3 (IF-1.65). e03582.

Malathi, M and Godiwalla, K M and Kumar, A and Chacko, E Z and Ajmani, S K and Ranganathan, S (2014) Generation of magnesium for in-situ desulphurisation–investigations on influence of inert gas flowrate. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123/2 (IF-0.690). pp. 67-74.

Malathi, M and Kumar, Anil and Godiwalla, K M and Chacko, Z E and Ajmani, S K and Ranganathan, S (2014) Cold Model Study of Submerged Peripheral Gas Bubbling from a Cylindrical Dispenser. ISIJ International, 54(10) (IF-1.069). pp. 2239-2247.

Malathi, M and Kumar, Anil and Chacko, Z.E and Godiwalla, K.M and Ajmani, S K and Ranganathan, S (2013) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85 (IF-1.15). pp. 927-934.

Malathi, M and Nayak, A K and Paswan, Dayanand (2018) Heat transfer modeling during production of directly reduced iron (DRI) pellets by simulating tunnel kiln condition. Journal of Metallurgy and Materiasl Science, 60(4) . pp. 221-228.

Malathi, M and Roy, T K and Shainu, S and Ajmani, S K and Paswan, Dayanand and Prakash, S and Mahashabde, V V (2014) Prediction of Longitudinal Facial Crack and Optimization of Process Parameters during Continuous Casting of Slabs Using Artificial Neural Network Models. Tata search, 2 . pp. 227-235.

Malcor, H (1959) Experience with Low-Shaft Furnace at Ougree. NML Technical Journal, 1 (1). pp. 88-104.

Malcor, H (1964) Recovery of unburnt gases from oxygen blown converters. NML Technical Journal, 6 (1). pp. 30-34.

Malhotra, Tej Bhan (1973) Presidential Address by the Managing Director of Urnamium Corporation of India. NML Technical Journal, 15 (4). pp. 3-4.

Mallar, Ray and Bandopadhyay, N R and Ghanta, Ujjwal and Klie, Robert F and Pramanick, A K and Das, Samaresh and Ray, Samit K and Hossain, S M (2011) Temperature dependent photoluminescence from porous silicon nanostructures: Quantum confinement and oxide related transitions. Journal of Applied Physics, 110 (9). p094309-1-p094309-8.

Mallik, D and Mir, Aparna and Bhattacharya, S and Nayar, S (2011) Fluorimetric assay of interaction of protein with ferrofluids. Spectrochimica Acta Part A-Molecular And Biomolecular Spectroscopy , 78 (1). pp. 332-336.

Mallik, Manab and Kailath, A J and Ray, K K and Mitra, R (2017) Effect of SiC content on electrical, thermal and ablative properties of pressureless sintered ZrB2-based ultrahigh temperature ceramic composites. Journal of the European Ceramic Society, 37(2) (IF-3.411). pp. 559-572.

Mallik, Manab and Kailath, A J and Ray, K K and Mitra, R (2012) Electrical and thermophysical properties of ZrB2 and HfB2 based composites. Journal of the European Ceramic Society, 32 (10). pp. 2545-2555.

Mallikarjun, K and Suwas, S and Ghosh Chowdhury, S and Bhargava, S (2003) Effect of prior beta processing steps on microstructural refinement during thermomechanical processing of a two phase (alpha+beta) titanium alloy. Materials Science and Technology, 19 (12). pp. 1688-1696.

Mamgain, Anubhuti and Upadhyay, Trilok Chandra (2017) Study of dielectric constant and loss tangent in potassium dihydrogen phosphate crystal. Journal of Metallurgy and Materials Science, 59(2) . pp. 59-66.

Mandal, Anup and Guguloth, K and Bandyopadhyay, T K (2016) Characterization of Microstructure and Mechanical Properties of 9.2Cr0.45V0.7C Heat-Resistant Steel. Metallography, Microstructure, and Analysis, 5(2) (IF-0.58). pp. 95-107.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Dry sliding wear behavior of stir cast aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (7). pp. 2417-2425.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Effect of coating on the wear properties of stir cast Al–2Mg base short steel fiber reinforced composites. Materials Science and Engineering A, 460-461 . pp. 485-493.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Effect of copper and nickel coating on short steel fiber reinforcement on microstructure and mechanical properties of aluminium matrix composites. Materials Science and Engineering A, 492 (1-2). pp. 346-352.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Effect of wt% reinforcement on microstructure and mechanical properties of Al-2Mg base short steel fiber composites. Journal of Materials Processing Technology, 198 (1-3). pp. 195-201.

Mandal, D and Dutta, B K and Panigrahi, S C (2010) Influence of coating and alloy additions on distribution of fibres and hardness of cast aluminium base short steel fibre reinforced composites. Materials Science and Technology, 26 (2). pp. 157-163.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites. Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites , 42 (20). pp. 8622-8628.

Mandal, D and Dutta, B K and Panigrahi, S C (2006) Microstructure and mechanical properties of Al–2Mg alloy base short steel fiber reinforced composites prepared by vortex method. Journal of Materials Science, 41 (15). pp. 4764-4770.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Processing and mechanical properties of Al, A-Mg-2 and Al-Cu-4 alloy base short steel fibre reinforced composites prepared by vortex method. Materials Science and Technology, 23 (1). pp. 23-28.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Wear properties of copper-coated short steel fiber reinforced stir cast Al–2Mg alloy composites. Wear, 265 (5-6). pp. 930-939.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Mandal, D and Ghosh, M and Pal, J and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Ghosh, Sukomal (2014) Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels. Materials & Design, 54 (IF-3.171). pp. 831-837.

Mandal, D and Murmu, Laxmi and Choudhury, C and Singh, Gaurav and Sahoo, K L (2019) Influence of alloying elements and grain refiner on microstructure, mechanical and wear properties of Mg-Al-Zn alloys. Canadian Metallurgical Quarterly, 58(2) . pp. 241-251.

Mandal, D and Viswanathan, S (2013) Effect of heat treatment on microstructure and interface of SiC particle reinforced 2124 Al matrix composite. Materials Characterization, 85 (IF-1.880). pp. 73-81.

Mandal, D and Viswanathan, S (2013) Effect of re-melting on particle distribution and interface formation in SiC reinforced 2124Al matrix composite. Materials Characterization, 86 . pp. 21-27.

Mandal, G K and Ashok, K and Das, S K and Biswas, S K and Sarkar, R B and Bharathy, R S and Srivastava, V C (2018) Development of Stretch Flangeable Grade Steels by Inclusion Engineering Approach. Journal Of Materials Engineering And Performance, 27(11) (IF-1.094). pp. 5622-5634.

Mandal, G K and Balasubramaniam, R and Mehrotra, S P (2009) Theoretical Investigation of the Interfacial Reactions during Hot-Dip Galvanizing of Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 40-A (3). pp. 637-645.

Mandal, G K and Batra, N K and Mehrotra, S P (2007) Sulphur control of blast furnace hot metal by manganese additions. Transaction of the Indian Institute of Metals, 60 (1). pp. 45-52.

Mandal, G K and Das, Suchandan K and Balasubramaniam, R and Mehrotra, S P (2011) Evolution of microstructures of galvanised and galvannealed coatings formed in 0.2 wt-% aluminium–zinc bath. Materials Science and Technology, 27 (8 ). pp. 1265-1270.

Mandal, G K and Das, Swapan K and Balasubramaniam, R and Mehrotra, S P (2010) Effect of Elevated Strip Entry Temperature on the Aluminum Rich Inhibition Layer at the Substrate Coating Interface During Galvanizing. Canadian Metallurgical Quarterly , 49 (3). pp. 301-309.

Mandal, G K and Dutta, M and Kumar, Tipu and Mondal, Avik and Walunj, M G and Mishra, Suman K and Pais, R and Pathak, L C (2020) Formation and growth of iron-zinc intermetallics during annealing treatment of galvanized steel. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 29-47.

Mandal, G K and Kamaraj, A and Minj, M.M. and Das, S K and Ramanan, R B V and Venugopalan, T (2019) Development of Speciality Grade Wire by Controlling the Inclusions in High-Carbon Steel Using Synthetic Slag Treatment. Transactions of the Indian Institute of Metals, 72(2) . pp. 369-381.

Mandal, G K and Kumar, Sudhir and Kumar, Tipu and Srivastava, V C (2017) Hot Deformation Behaviour of a Nb-Mo Linepipe Steel. Transaction of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1943-1951.

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2009) Microstructural study of galvanized coatings formed in pure as well as commercial grade zinc baths. Transactions of the Indian Institute of Metals, 62 (1). pp. 35-40.

Mandal, G K and Rajnikanth, V and Kumar, S and Mishra, D and Misra, S and Srivastava, V C and Ghosh Chowdhury, S (2017) Microstructure Evolution During Hot Deformation of a Micro-Alloyed Steel. Transactions of the Indian Institute of Metals, 70(4) (IF 0.533). pp. 1019-1033.

Mandal, G K and Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2014) A Steady State Thermal and Material Balance Model for an Iron Making Blast Furnace and Its Validation with Operational Data. Transaction of the Indian Institute of Metals, 67(2) (IF-0.427). pp. 209-221.

Mandal, G K and Stanford, Nicole and Hodgson, Peter and Beynon, John H (2012) Effect of hot working on dynamic recrystallisation study of as-cast austenitic stainless steel. Materials Science and Engineering A, 556 . pp. 658-695.

Mandal, G K and Stanford, Nicole and Hodgson, Peter and Beynon, John H (2013) Static recrystallisation study of as-cast austenitic stainless steel. Materials Science and Engineering A, 576 (IF-2.108). pp. 118-125.

Mandal, M and Patra, S and Chakraborty, R and Saha, Partha and Shome, M (2022) Microstructural evolution and nanoindentation study of magnetic pulse welded Nitinol and Aluminium sheets. Materials Characterization, 184 .

Mandal, R K and Pramanick, A K and Sastry, G V S and Lele, S (2004) Unique Indexing Scheme of Decagonal Phases based on a six Dimensional Model. Materials Resources Society Symposium Proceedings, 805 . LL1.6.1-LL1.6.10.

Mandal, S and Kailath, A J (2019) Enhanced Plasticity of Cu-Zr-Ti Bulk Metallic Glass and Its Correlation with Fragility. Metallurgical and Materials Transactions A , 50(1) . pp. 199-208.

Mandal, S B (1978) Spectrophotometric determination of copper and minor constituents in low grade copper ores. NML Technical Journal, 20 (3-4). pp. 37-45.

Mandal, S B (1978) Spectrophotometric determination of copper and minor constituents in low grade copper ores. NML Technical Journal, 20 (3-4). pp. 37-45.

Mandal, S K (2011) Study of process dynamics in Floatex density separator based on computational intelligent vision. International Journal of Computational Vision and Robotics, 2 (4). pp. 314-322.

Mandal, Soumen and Sivakumar, B and Singhbabu, Y N and Bandyopadhyay, N R and Chattopadhyay, P P and Kailath, A J (2019) Electrochemical Behavior of Cu 60 Zr 25 Ti 15 Bulk Metallic Glass with the Addition of Nb and Mo. Journal of Materials Engineering and Performance, 28 (IF-1.476). pp. 6874-6884.

Mandal, Sudipta and Rao, Venkatesh and Ray, Ajoy K (2004) Characterization of the brazed joint interface between Al2O3 and (Ag-Cu-Ti). Journal of Materials Science, 39 (16-17). pp. 5587-5590.

Mandal, Sudipta and Ray, Ashok K and Ray, Ajoy K (2004) Correlation between the mechanical properties and the microstructural behaviour of Al2O3–(Ag–Cu–Ti) brazed joints. Materials Science and Engineering A, 383 (2). pp. 235-244.

Mandhyan, Mala and Parmar, Kavita and Mandhyan, A K (2007) Eco-friendly inhibition of mild steel in acidic media. Journal of Metallurgy and Materials Science, 49 (2). pp. 123-128.

Mangalam, V and Khangaonkar, P R (1984) Flotation behavior of magnesite with carboxylic-acid collectors and a chelating agent. Transactions of the Indian Institute of metals, 37 (6). pp. 730-737.

Mangalam, V and Khangaonkar, P R (1985) Zeta-potential and adsorption studies of the chalcopyrite-sodium diethyl dithio carbamate system. International Journal of Mineral Processing, 15 (4). pp. 269-280.

Mangalam, V and Khangaonkar, P R (1983) Zeta-potential and flotation studies of chalcopyrite fines with 8-hydroxy quinoline. Colloids and Surfaces A Physicochemical and Engineering Aspects, 7 (3). pp. 209-220.

Mangalam, V and Khangaonkar, P R (1987) Zeta-potential and flotation studies of chalcopyrite fines with cupferron. Transactions of the Indian Institute of metals, 40 (1). pp. 49-54.

Mani, M and Kadam, G G and Konwar, L J and Panda, A B (2022) Ru-supported mesoporous melamine polymers as efficient catalysts for selective hydrogenation of aqueous 5-hydroxymethylfurfural to 2,5-bis-(hydroxymethyl)furan. Biomass Conversion and Biorefinery .

Mani, M and Mariyaselvakumar, M and Samikannu, A and Panda , A B and Konwar, L J and Mikkola, J P (2022) Continuous hydrocyclization of aqueous levulinic acid to ?-valerolactone over bi-functional Ru/NbOPO4/SBA-15 catalyst under mild conditions. Applied Catalysis A General, 643 .

Mani, M and Mariyaselvakumar, M and Tothadi, S and Panda, Asit Baran and Srinivasan, K and Konwar, L J (2024) Base free HMF oxidation over Ru-MnO2 catalysts revisited: Evidence of Mn leaching to Mn-FDCA complexation and its implications on catalyst performance. Molecular Catalysis .

Manivel, P (2017) A comparative study on the inhibitive effect of parasubstituted anilines on corrosion of iron in 1M HCI solutions. Journal of Metallurgy and Materials Science, 59(1) . pp. 39-47.

Manivel, P and Venkatachari, G (2004) The influence of H+ and Cl- ions on the effect of corrosion inhibition of iron by p-substituted anilines. Journal of Metallurgy and materials Science., 46 (3). pp. 165-173.

Manivel, P and Venkatachari, G (2004) Investigation on the inhibitive effect of poly (p-aminophenol) on corrosion of iron in 1M HCL solutions. Journal of Metallurgy and Materials Science, 46 (4). pp. 263-270.

Manjunath, K and Tewary, S and Khatri, N and Cheng, K (2023) Discrete wavelet transforms analysis of vibration signals for correlating tool wear in diamond turning of additive manufactured Ti-6Al-4V alloy. Proceedings of the Institution of Mechanical Engineers Part B- Journal of Engineering Manufacture .

Manjunath, K and Tewary, S and Khatri, N and Cheng, K (2023) In-process monitoring of the ultraprecision machining process with convolution neural networks. International Journal of Computer Integrated Manufacturing .

Manjunath, K and Tewary, S and Khatri, N and Cheng, K (2023) Monitoring of machining process anomalies in diamond turning of Ti6Al4V alloy using transfer learning-based algorithms. Computers& Industrial Engineering , 182 .

Mankhand, T R and Singh, S N and Prasad, P M (1997) Recovery of copper and zinc from an off-grade/complex sulphide concentrate. NML Technical Journal, 39 (4). p. 183.

Mannar, J E and Muthukrishnan, V (1964) Symposium on utilisation of metallurgical wastes-A review. NML Technical Journal, 6 (2). pp. 7-12.

Manoharan, S S and Singh, Brajendra and Sahu, Ranjan K (2007) Powder neutron diffraction evidence for enhanced inter plane magnetic coupling in La(1.2)Sr(1.8)Mn(2-x)Ru(x)O(7) layered manganites. Journal of Applied Physics, 101 (9).

Manoharan, S S and Singh, Brajendra and Sahu, Ranjan K and Zimmer, A and Lim, S -H and Salamanca-Riba, L G and Chandrasekar, V (2008) Effect of Ru-Mn redox interactions on the hole carrier density in pulsed electron deposited La1-xPbxMn0.8Ru0.2O3 (0.2 <= x <= 0.4) thin films. Journal Of Physics-Condensed Matter, 20 (23). p. 235205.

Manoj, A and Rao, M Ananda and Basha, M M and Basha, S M and Sankar, M R (2020) State of art on wire feed additive manufacturing of Ti-6Al-4V alloy. Materials Today - Proceeding, 26(Part 2 ) (SNIP-0.576). pp. 2608-2615.

Mathew, M D and Rao, K B S and Mannan, S L and Paknikar, K and Singh, R (2000) Recovery of creep properties of alloy 625 after long term service. Creep and Fracture Of Engineering Materials and Structures, 171 (1). pp. 537-543.

Mathur, G P and Chakraborty, N (1975) Twenty-five years of dedicated service by National Metallurgical Laboratory to the mineral industries. NML Technical Journal, 17 (3-4). pp. 35-41.

Maulik, S C (1997) R&D on beneficiation and sintering of iron ore at national metallurgical laboratory (NML). Ironmaking resources and reserves estimation, (5). pp. 203-209.

Maulik, S C (1984) Sinter making-Russian practice. NML Technical Journal, 26 (3-4). pp. 44-51.

Maulik, S C and Patnaik, H and Chakravorty, N (1988) Development of a non-linear regression model for iron ore sintering. NML Technical Journal, 30 (1-4). pp. 17-24.

Maulik, S C and Rafiuddin, S and Chakravorty, N (1986) Dry beneficiation of coal: A review. NML Technical Journal, 28 (1-4). pp. 37-46.

Mayuri, S and Jha, Niki S and Jha, S K (2023) Curcumin-capped gold nanorods as optical sensing platform for sequence-specific detection of DNA based on their self-assembly. International Journal of Biological Macromolecules, 253(Part 3) .

Mazinan , Vahid and Nosrati , Hassan (2014) Effect of primary materials ratio and their stirring time on SiC nanoparticle production efficiency through sol gel process. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 29-34.

Mazinani, Vahid (2014) Effect of pH on SiC nanopowder synthesized by sol-gel method. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 143-147.

Mazumder, Rajat and Bandyopadhyay, N R and Palit Sagar, S (2012) Detection and quantification of lack-of-penetration in Al-Al friction stir welded plates using phased array ultrasonic technique. Journal of Non-destructive Testing & Evaluation, 10 (4). pp. 47-52.

Medunić, Gordana and Chakravarty, Sanchita and Kundu, Rajen (2022) Computational skills in geosciences higher education system for the 21st century. Mathematical methods and terminology in geology 2022 .

Meena, L K and Gorja, S R and Bhardwaj, A and Singh, Raghuvir (2024) Service Domains of 13Cr Martensitic Stainless Steels: A Review of State-of-Art Knowledge vis-à-vis ANSI/NACE MR0175/ISO 15156. Transactions of The Indian Institute of Metals .

Meena, L K and Madan, M and Chaudhari, G P and Singh, Raghuvir (2024) Flow-Assisted Corrosion of API 5L X56 Steel: Effect of Flow Velocity and Dissolved Oxygen. Transactions of The Indian Institute of Metals .

Meena, L K and Seshagiri, R and Singh, Raghuvir (2023) Corrosion behavior of strontium-modified Al-12Si cast alloys in flowing and stagnant chloride-containing media. Journal of Alloys and Compounds, 962 .

Mehrotra, S P (2007) Realm of Mechanochemistry in Extractive Metallurgy - Scientific Curiosity to Commercial Reality. Transactions of the Indian Institute of Metals, 60 (1). pp. 1-13.

Mehrotra, S P and Alex, T C and greifzu, G and Kumar, Rakesh (2016) Mechanical Activation of Gibbsite and Boehmite: New Findings and their Implications. Transactions of the indian institute of metals, 69(1) (IF-0.533). pp. 51-59.

Mehrotra, S P and Singh, Ratnakar (1994) Role of froth processes on flotation. Metals Materials and Processes, 6 (3). pp. 195-216.

Mehrotra, S P and Singh, Ratnakar (1995) Role of Froth Processes on Flotation. Metals Materials and Processes, 6 (3). pp. 1-22.

Mehta, K D and Das, Chitrangada and Kumar, Rakesh and Pandey, B D and Mehrotra, S P (2010) Effect of mechano-chemical activation on bioleaching of Indian Ocean nodules by a fungus. Minerals Engineering, 23 . pp. 1207-1212.

Mehta, K D and Das, Chitrangada and Pandey, B D (2010) Leaching of copper, nickel and cobalt from Indian Ocean manganese nodules by Aspergillus niger. Hydrometallurgy, 105 (1-2). pp. 89-95.

Mehta, K D and Pandey, B D and Mankhand, T R (2002) Bio-chemical recovery of valuable metals from Indian Ocean nodules in presence of pyrite and sulphur. Transactions of the Indian Institute of Metals, 55 (3). pp. 71-80.

Mehta, K D and Pandey, B D and Mankhand, T R (2003) Studies on kinetics of biodissolution of metals from Indian Ocean nodules. Minerals Engineering, 16 (6). pp. 523-527.

Mehta, K D and Pandey, B D and Premchand, (1997) Bio leaching of copper, nickel and cobalt from copper converter slag by Thiobacillus Ferroxidens. NML Technical Journal, 39 (2). pp. 59-70.

Mehta, K D and Pandey, B D and Premchand, (1999) Bio-assisted leaching of copper, nickel and cobalt from copper converter slag. Materials Transactions JIM, 40 (3). pp. 214-221.

Mehta, M I and Kashyap, B P and Singh, R K P (2016) Study on flow properties of rotor grade steel. Journal of Metallurgy and Materials Science, 58(4) (IF- 0.04). pp. 221-229.

Mehta, Nirajkumar C and Shukla, Dipesh D (2017) Stress life analysis of induction furnace wall for magnesia ramming mass. Journal of Metallurgy and Materials Science, 59(2) . pp. 85-101.

Meraj, Md and Pramanik, Susanta and Pal, J (2016) Role of MgO and Its Different Minerals on Properties of Iron Ore Pellet. Transaction of the Indian Institute of Metals, 69(6) (IF- 0.533). pp. 1141-1153.

Meshram, Pratima and Abhilash, (2019) Battery Recycling- Charged with Huge Potential. Material Recycling , 5(2) . pp. 20-22.

Meshram, Pratima and Abhilash, (2020) Recovery and Recycling of Cerium from Primary and Secondary Resources- a Critical Review. Mineral processing and extractive metallurgy review, 41(4) (IF-1.615). pp. 279-310.

Meshram, Pratima and Abhilash, (2022) Strategies for Recycling of Primary and Secondary Resources for Germanium Extraction. Mining Metallurgy & Exploration .

Meshram, Pratima and Abhilash, and Kumari, Jyotsna and Pandey, B D (2016) Extraction of vanadium and synthesis of vanadium pentaoxide from Bayer's sludge. Russian Journal Of Non-Ferrous Materials, 57(4) (IF-0.238). pp. 338-346.

Meshram, Pratima and Abhilash, and Panday, B D and Mankhand, T R and Deveci, Haci (2016) Acid baking of spent lithium ion batteries for selective recovery of major metals: A two-step process. Journal of Industrial and Engineering Chemistry, 43 (IF- 4.421). pp. 117-126.

Meshram, Pratima and Abhilash, and Pandey, B D and Mankhand, T R and Deveci, Haci (2016) Comparision of Different Reductants in Leaching of Spent Lithium Ion Batteries. Journals of Metals, 68(10) (IF-1.860). pp. 2613-2623.

Meshram, Pratima and Abhilash, and Pandey, B D and Mankhand, T R and Deveci, Haci (2018) Extraction of metals from spent lithium ion batteries: role of acid, reductant and process intensification in recycling. 25(4):368-375, 25(4) (IF-0.348). pp. 368-375.

Meshram, Pratima and Abhilash, and Sahu, Rina (2020) Environmental impact of spent lithium-ion batteries and green recycling perspectives by organic acids - A review. Chemosphere, 242 (IF-5.778).

Meshram, Pratima and Bhagat, Lalit and Prakash, U and Pandey, B D and Abhilash, (2017) Organic acid leaching of base metals from copper granulated slag and evaluation of mechanism. Canadian Metallurgical Quarterly , 56(2) (IF -0.596). pp. 168-178.

Meshram, Pratima and Ghosh, Anirban and Ramamurthy, Y and Pandey, B D and Abhilash, and Torem, M L (2018) Removal of Cr(VI) from mine effluents by ion exchange resins-comparative study of Amberlite IRA 400 And IRA 900. Russian Journal of Nonferrous Metals . (In Press)

Meshram, Pratima and Pandey, B D and Abhilash, (2019) Advanced Review on Extraction of Nickel from Primary and Secondary Sources. Journal Mineral Processing and Extractive Metallurgy Review , 40(3) . pp. 157-193.

Meshram, Pratima and Pandey, B D and Abhilash, (2019) Perspective of availability and sustainable recycling prospects of metals in rechargeable batteries – A resource overview. Resources Policy, 60 . pp. 9-22.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2014) Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: A comprehensive review. Hydrometallurgy, 150 (IF-2.224). pp. 192-208.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Hydrometallurgical processing of spent lithium ion batteries (LIBs) in the presence of a reducing agent with emphasis on kinetics of leaching. Chemical Engineering Journal, 281 (IF-4.321). pp. 418-427.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Leaching of base metals from spent Ni–metal hydride batteries with emphasis on kinetics and characterization. Hydrometallurgy, 158 (1.933). pp. 172-179.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2016) Process optimization and kinetics for leaching of rare earth metals from the spent Ni–metal hydride batteries. Waste Management, 51 (IF-4.030). pp. 196-203.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Recovery of valuable metals from cathodic active material of spent lithium ion batteries: Leaching and kinetic aspects. Waste Management, 45 (IF-3.220). pp. 306-313.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2023) Recovery of valuable metals from cathodic active material of spent lithium-ion batteries: Leaching and kinetic aspects. Waste Management, 45 . pp. 306-313.

Meshram, Pratima and Prakash, Uday and Bhagat, Lalit and Abhilash, and Zhao, Hongbo and van Hullebusch, Eric D (2020) Processing of Waste Copper Converter Slag Using Organic Acids for Extraction of Copper, Nickel, and Cobalt. Minerals, 10(3) (IF-2.380). p. 290.

Meshram, Pratima and Purohit, Bijoy Kumar and Sinha, Manish K and Sahu, S K and Pandey, B D (2015) Demineralization of low grade coal – A review. Renewable and Sustainable Energy Reviews, 41 (IF-5.510). pp. 745-761.

Meshram, Pratima and Sahu, S K and Pandey, B D and Kumar, Vinay and Mankhand, T R (2012) Removal of Chromium(III) from the Waste Solution of an Indian Tannery by Amberlite IR 120 Resin. International Journal of Nonferrous Metallurgy, 1 (3). pp. 32-41.

Meshram, Pratima and Sinha, Manish K and Sahu, S K and Khan, Pritam and Pandey, B D and Mankhand, T R (2013) Solvothermal synthesis of high value copper powder from copper bleed solution of an Indian copper smelter. Powder Technology, 233 (IF-2.265). pp. 335-340.

Meshram, Pratima and Somani, M and Pandey, B D and Mankhand, T R and Deveci, Haci and Abhilash, (2017) Two stage leaching process for selective metal extraction from spent nickel metal hydride batteries. Journal of Cleaner Production, 157 (IF -5.715). pp. 322-332.

Meshram, Pratima and Virolainen, S and Abhilash, and Sainio, Tuomo (2022) Solvent Extraction for Separation of 99.9% Pure Cobalt and Recovery of Li, Ni, Fe, Cu, Al from Spent LIBs. Metals, 12(6) .

Meshram, R B and Kumar, Sanjay (2021) Comparative life cycle assessment (LCA) of geopolymer cement manufacturing with Portland cement in Indian context. International Journal of Environmental Science and Technology .

Meshram, R B and Kundu, G and Mukherjee, D (2016) Heat Transfer Studies in Ejector-induced Downflow Bubble Column. International Journal of Chemical Reactor Engineering, 1(5) (IF-0.623). pp. 955-964.

Metya, A and Ghosh, M and Parida, N and Palit Sagar, S (2008) Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel. NDT & E International, 41 . pp. 484-489.

Metya, Avijit and Munda, Parikshit and Rajnikanth, V and Roy, Rajat (2016) Failure Analysis of SA213-T22 Re-heater Rear Tube of Thermal Power Plant. Transactions of the Indian Institute of Metals, 69(2) (IF-0.533). pp. 665-668.

Metya, Avijit Kr and Ghosh, M and Parida, N and Balasubramaniam, Krishnan (2015) Effect of tempering temperatures on nonlinear Lamb wave signal of modified 9Cr–1Mo steel. Materials Characterization, 107 . pp. 14-22.

Metya, Avijit Kumar and Bar, H N and Tarafder, Soumitra and Balasubramaniam, Krishnan (2017) Nonlinear Lamb wave for the assessment of ratcheting behavior in IF steel. Journal of Non Destructive Testing & Evaluation, 15/10 .

Metya, Avijit Kumar and Das, Anindya and Tarafder, S and Balasubramaniam, Krishnan (2019) Nonlinear Lamb wave for the evaluation of creep damage in modified 9Cr–1Mo steel. NDT & E International, 107 .

Metya, Avijit Kumar and Ghosh, M and Parida, N and Palit Sagar, S (2008) Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel. NDT & E International, 41 (6). pp. 484-489.

Metya, Avijit Kumar and Parida, N and Bhattacharya, D K and Bandopadhyay, N R and Palit Sagar, S (2007) Assessment of Localized Plastic Deformation during Fatigue in Polycrystalline Copper by Nonlinear Ultrasonic. Metallurgical and Materials Transactions A, 38 (12). pp. 3087-3092.

Metya, Avijit Kumar and Pramanick, A K and Bar, H N and Gupta, Suneel K and Sagar, Sarmishtha Palit (2023) Detection of fatigue crack initiation pre-cursor in meta-stable SS 304LN using Rayleigh surface wave harmonic generation. Materials Characterization, 201 .

Metya, Avijit Kumar and Tarafder, S and Balasubramaniam, Krishnan (2018) Nonlinear Lamb wave mixing for assessing localized deformation during creep. NDT & E International, 98 (IF-2.781). pp. 89-94.

Metya, Avijit Kumar and Tarafder, Soumitra and Balasubramaniam, Krishnan (2019) Characterization of Tempering Behaviour of Modified 9Cr-1Mo Steel by Ultrasonic Lamb wave Mixing. Materialstoday :Proceedings, 11(Part 2) . pp. 695-699.

Meyer, C and Ellendt, N and Srivastava, V C and Uhlenwinkel, V (2012) Cooling conditions for the generation of bulk metallic glass by droplet deposition. International Journal of Materials Research, 103(9) (IF-). pp. 1090-1095.

Miadad, S J and Venugopalan, T and Halder, N and Kumar, B Ravi (2020) On the Study of Batch Annealing Parameter Optimization for Higher Lankford Value in High Phosphorus Interstitial Free High Strength Steel. Journal of Materials Engineering and Performance, 29 . pp. 7598-7606.

Michla, J R J and Ravi Kumar, B and Prabhu, T Ram and Siengchin, S and Kumar, M A and Rajini, N (2022) Effect of nitriding on mechanical and microstructural properties of Direct Metal Laser Sintered 17-4PH stainless steel. Journal of Materials Research and Technology-JMR&T, 19 . pp. 2810-2821.

Minhas, Gurbux Singh and Bhaskar Rao, H V (1965) Development of superduty silica Bricks with indigenous raw materials. NML Technical Journal, 7 (2). pp. 15-19.

Minhas, Gurbux Singh and Bhaskar Rao, H V (1959) Evaluation of quartzites for the manufacture of silica bricks. NML Technical Journal, 1 (2). pp. 32-37.

Mir, Aparna and Mallik, D and Bhattacharya, S and Mahata, D and Sinha, Arvind and Nayar, S (2010) Aqueous ferrofluids as templates for magnetic hydroxyapatite nanocomposites. Journal of Materials Science-Materials in Medicine, 21 (8). pp. 2365-2369.

Mishra, A and Dubey, Paritosh and Chandra, R and Srivastava, S K (2021) Observation of large exchange bias field in Mn rich NiMnAl Heusler alloy thin film. Journal of Magnetism and Magnetic Materials, 532 .

Mishra, Aadarsh (2014) The films of tin sulphide for use in thin film solar cell devices. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 73-76.

Mishra, D and Anand, S and Panda, R K and Das, R P (2002) Characterization of Products Obtained during Formation of Barium Monoaluminate through Hydrothermal Precipitation–Calcination Route. Journal of American Ceramic Society, 85 . pp. 437-443.

Mishra, D and Anand, S and Panda, R K and Das, R P (2002) Effect of anions during hydrothermal preparation of boehmites. Materials Letters, 53 . pp. 133-137.

Mishra, D and Anand, S and Panda, R K and Das, R P (2000) Hydrothermal preparation and characterization of boehmites. Materials Letters, 42 . pp. 38-45.

Mishra, D and Anand, S and Panda, R K and Das, R P (2002) Preparation of barium hexa-aluminate through a hydrothermal precipitation–calcination route and characterization of intermediate and final products. Materials Letters, 56 . pp. 873-879.

Mishra, D and Anand, S and Panda, R K and Das, R P (2000) Statistical optimization of conditions for the hydrothermal precipitation of boehmite. Hydrometallurgy, 58 . pp. 169-174.

Mishra, D and Anand, S and Panda, R K and Das, R P (2004) Studies on characterization, microstructures and magnetic properties of nano-size barium hexa-ferrite prepared through a hydrothermalprecipitation–calcination route. Materials Chemistry and Physics, 86 . pp. 132-136.

Mishra, D and Anand, S and Panda, R K and Das, R P (2003) Synthesis of high-surface area Mn-doped barium hexa-aluminates by a combination of hydrothermal precipitation–calcination route. Materials Chemistry and Physics, 82 . pp. 892-896.

Mishra, D and Anand, S and Panda, R K and Das, R P (2004) X-ray diffraction studies on aluminum-substituted barium hexaferrite. Materials Letters, 58 . pp. 1147-1153.

Mishra, D and Kanari, N and Sahu, K K and Gaballah, I (2008) Recovery of zinc and lead from electric arc furnace dusts through the oxy – chlorination route. Metal Materials & Processes, 20 (2). pp. 161-172.

Mishra, D and Sahu, K K and Agrawal, A (2018) Process integration for material synthesis from a deactivated catalyst: Studies on the interaction of metal ions between two immiscible phases. Journal of Hazardous Materials, 344 (IF-6.434). pp. 169-178.

Mishra, D and Sinha, S and Sahu, K K and Agrawal, A and Kumar, R (2017) Recycling of Secondary Tungsten Resources. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 479-485.

Mishra, D and Srivastava, R R and Sahu, K K and Singh, T B and Jana, R K (2011) Leaching of roast-reduced manganese nodules in NH3 – (NH4)2CO3 medium. Hydrometallurgy, 109 (3-4). pp. 215-220.

Mishra, D K and Das, L N (1988) Design and development of ten channels multiplexer. NML Technical Journal, 30 (1-4). pp. 33-34.

Mishra, D K and Mohapatra, J and Mahato, Banashree and Kumar, P and Mitra, A and Singh, S K and Kanjilal, D (2013) Effect of 1.2 MeV argon ions irradiation on magnetic properties of ZnO. Applied Surface Science, 282 (IF-2.112). pp. 954-959.

Mishra, G and Chandan, A K (2021) Effect of cold deformation extent and ART annealing duration on the microstructure and mechanical properties of a medium manganese steel. Materials Chemistry and Physics, 271 .

Mishra, G and Chandan, A.K. and Kundu, S (2017) Hot rolled and cold rolled medium manganese steel: Mechanical properties and microstructure. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 701 (IF-3.094). pp. 319-327.

Mishra, Gangotri and Kumar, Rajendra (1966) Development of an ice calorimeter for high temperature calorimetry. NML Technical Journal, 8 (3). pp. 11-14.

Mishra, Gangotri and Kumar, Rajendra (1967) Heat contents and heat capacities of liquid lead-antimony alloys. NML Technical Journal, 9 (4). pp. 18-21.

Mishra, Gangotri and Kumar, Rajendra (1967) Heat contents and heat capacity of lead-antimony-tin ternary eutectic Alloy in the Liquid State. NML Technical Journal, 9 (4). pp. 22-23.

Mishra, H N and Das, Chitrangada (2003) A review on biological control and metabolism of aflatoxin. Critical Reviews in Food Science and Nutrition, 43 (3). pp. 245-264.

Mishra, K K (1997) Joint design in welding. Journal of materials processing & manufacturing science, 5 (4). pp. 303-315.

Mishra, K K and Pavelic, V and Baker, G S (1996) Strip welding of aluminum bronze. Journal of materials processing & manufacturing science, 4 (3). pp. 243-267.

Mishra, P N and Goswami, N G and Panda, K C (2013) Impact of grant-in-aid projects at CSIR-National Metallurgical Laboratory, India: A bibliometric study. SRELS Journal of Information Management, 50(4) (IF-). pp. 387-412.

Mishra, P N and Panda, Krushna C and Goswami, N G (2010) Citation analysis and research impact of National Metallurgical Laboratory, India during 1972- 2007: a case study. Malaysian Journal of Library & Information Science, 15 (1). pp. 91-113.

Mishra, Prerna and Rajpurohit, R S and Srinivas , N C S and Sastry, G V S and Singh, Vakil (2020) Ratcheting Fatigue Behavior of Modified 9Cr-1Mo Steel at Room Temperature. Metals and Materials International, Online (IF-1.990).

Mishra, Purusottam Narayana and Kak, S K and Srivastava, S C (2001) An expert system for LD steel making. IETE Journal if Research, 47 (1-2). pp. 85-89.

Mishra, Purusottam Narayana and Singh, S N and Dev, S C and Basak, P and Roy, A and Mohanty, A (1993) An instrumentation system for evaluation of contact materials. Measurement science & technology, 4 (2). pp. 221-225.

Mishra, R N and Bhatnagar, P P (1963) Thermal beneficiation of low-grade chrome ore from Kankauli deposits, Ratnagiri district, Maharashtra. NML Technical Journal, 5 (4). pp. 29-32.

Mishra, R R and Dhal, B and Dutta, S K and Dangar, T K and Das, N N and Thatoi, H N (2012) Optimization and characterization of chromium(VI) reduction in saline condition by moderately halophilic Vigribacillus sp isolated from mangrove soil of Bhitarkanika, India. Journal of Hazardous Materials, 227-228 (IF-4.173). pp. 219-226.

Mishra, Sujata and Bhatta, B C (2013) Solvent Extraction of Zr (IV) from HCl medium using Cyanex 923 as extractant in kerosene. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 299-304.

Mishra, Suman K (2009) Nano and Nanocomposite Superhard Coatings of Silicon Carbonitride and Titanium Diboride by Magnetron Sputtering. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 6 (3). pp. 345-354.

Mishra, Suman K (2020) Toughening of nanocomposite hard coatings. Reviews on advanced materials science , 59(1) (IF-1.197). pp. 553-585.

Mishra, Suman K and Sherbakov, V A (2016) In-situ synthesis of Ti-Si-C fine grained composite with different amount of TiC: Microstructure and mechanical properties. International Journal Of Refractory Metals & Hard Materials, 59 (IF- 2.155). 19-25.

Mishra, Suman K and Bhattacharyya, A S (2008) Effect of substrate temperature on the adhesion properties of magnetron sputtered nano-composite Si–C–N hard thin films. Materials Letters, 62 (3). pp. 398-402.

Mishra, Suman K and Bhattacharyya, A S and Mahato, P and Pathak, L C (2012) Multicomponent Ti-Si-B-C superhard and tough composite coatings by magnetron sputtering. Surface and Coatings Technology, 207 . pp. 19-23.

Mishra, Suman K and Bhattacharyya, A S and Rupa, P K P and Pathak, L C (2012) XPS Studies on Nanocomposite Si-C-N Coatings Deposited by Magnetron Sputtering. Nanoscience and nanotechnology letters, 4 (3). pp. 352-357.

Mishra, Suman K and Bhattacharyya, A S and Rupa, P K P and Pathak, L C (2013) XPS Studies on Nanocomposite SiCN Coatings Deposited by Magnetron Sputtering. Nanoscience and Nanotechnology Letters, 4 (3). pp. 352-357.

Mishra, Suman K and Bhople, A and Paswan, S (2014) Microstructure, hardness, toughness and oxidation resistance of Al2O3-ZrB2 composite with different Ti percentages prepared by in-situ SHS dynamic compaction. International Journal of Refractory Metals and Hard Materials, 43 (IF-1.764). pp. 7-12.

Mishra, Suman K and Das, S and Pathak, L C (2004) Defect structures in zirconium diboride powder prepared by self-propagating high-temperature synthesis. Materials Science and Engineering A, 364 (1-2). pp. 249-255.

Mishra, Suman K and Das, S and Ranganathan, S (2002) Precipitation in high strength low alloy (HSLA) steel: a TEM study. Materials Science and Engineering A, 323 (1-2). pp. 285-292.

Mishra, Suman K and Das, Swapan K (2005) Sintering and microstructural behaviour of SHS produced zirconium diboride powder with the addition of C and TiC. Materials Letters, 59 (27). pp. 3467-3470.

Mishra, Suman K and Das, Swapan K and Das, S K and Ramachandrarao, P (2000) Sintering studies on ultrafine ZrB2 powder produced by a self-propagating high-temperature synthesis process. Journal of Materials Research, 15 (11). pp. 2499-2504.

Mishra, Suman K and Das, Swapan K and Pathak, L C (2006) Sintering behaviour of self-propagating high temperature synthesised ZrB2–Al2O3 composite powder. Materials Science and Engineering A, 426 (1-2). pp. 229-234.

Mishra, Suman K and Das, Swapan K and Ramachandrarao, P (2002) Microstructure evolution during sintering of self-propagating high-temperature synthesis produced ZrB2 powder. Journal of Materials Research, 17 (11). pp. 2809-2814.

Mishra, Suman K and Das, Swapan K and Ramachandrarao, P and Belov, D Yu and Mamyan, S (2003) Synthesis of zirconium diboride-alumina composite by the self-propagating, high-temperature synthesis process. Metallurgical and Materials Transactions A, 34 (9). pp. 1979-1983.

Mishra, Suman K and Das, Swapan K and Ramachandrarao, P and Blov, D Y (2004) Self-propagating high-temperature synthesis of a zirconium diboride-alumina composite: a dynamic X-ray diffraction study. Philosophical Magazine Letters Online ISSN 1362-3036, 84 (1). pp. 41-46.

Mishra, Suman K and Das, Swapan K and Ray, Ajoy K and Ramachandrarao, P (2002) Effect of Fe and Cr Addition on the Sintering Behavior of ZrB2 Produced by Self-Propagating High-Temperature Synthesis. Journal of the American Ceramic Society, 85 (11). pp. 2846-2848.

Mishra, Suman K and Das, Swapan K and Ray, Ajoy K and Ramachandrarao, P (1999) Effect of nickel on sintering of self-propagating high-temperature synthesis produced titanium carbide. Journal of Materials Research, 14 (9). pp. 3594-3598.

Mishra, Suman K and Das, Swapan K and Sherbacov, V (2007) Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: A novel approach. Composites Science and Technology, 67 (11-12). pp. 2447-2453.

Mishra, Suman K and Das , S and Goel, R P and Ramachandrarao, P (1997) Self-propagating high temperature synthesis (SHS) of titanium carbide. Journal of Materials Science Letters, 16 (12). pp. 965-967.

Mishra, Suman K and Gaur, H and Rupa, P K P and Pathak, L C (2006) Deposition of nanostructured Si–C–N superhard coatings by rf magnetron sputtering. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures , 24 (3). pp. 1311-1317.

Mishra, Suman K and Gokuul, V and Paswan, S (2014) Alumina-titanium diboride in situ composite by self-propagating high-temperature synthesis (SHS) dynamic compaction: Effect of compaction pressure during synthesis. International Journal of Refractory Metals and Hard Materials, 43 (IF-1.764). pp. 19-24.

Mishra, Suman K and khusboo, and Sherbacov, V (2011) Fabrication of in-situ Ti–Si–C fine grained composite by the self propagating high temperature synthesis (SHS) process. International Journal of Refractory Metals and Hard Materials, 29 (2). pp. 209-213.

Mishra, Suman K and Kumar, Rakesh and Soni, and Sreemany, M and Pathak, L C (2015) Ultrathin to Nano Thickness TiN Coatings: Processing, Structural, Mechanical Behavior. Journal of Materials Engineering and Performance, 24(12) (IF-). pp. 5013-5021.

Mishra, Suman K and Kumar, V and Tiwari, S K and Mishra, T and Angula, G and Adhikari, S (2016) Development and degradation behavior of protective multilayer coatings for aluminum reflectors for solar thermal applications. Thin Solid Films, 619 (IF- 1.879). pp. 202-207.

Mishra, Suman K and Kumari, Swati (2017) Development of hard and optically transparent Al-Si-N nanocomposite coatings. Surface and Interface Analysis, 49(4) (IF-1.132). pp. 345-348.

Mishra, Suman K and Mahanta, P and Sen, S and Pathak, L C (2012) Effect of Nitrogen on the Growth of Carbon Nitride Thin Films Deposited by RF Plasma Enhanced Chemical Vapor Deposition. Nanoscience and Nanotechnology Letters, 4 . pp. 90-94.

Mishra, Suman K and Mahato, P and Mahato, B and Pathak, L C (2013) Thermal stability and effect of substrate temperature of TiSiBC hard nanocomposite coatings on microstructure, mechanical, thermal behaviour deposited by magnetron sputtering. Applied Surface Science, 266(1 February) . pp. 209-213.

Mishra, Suman K and N, Jagdeesh and Pathak, L C (2016) Fabrication of Nanosized Lanthanum Zirconate Powder and Deposition of Thermal Barrier Coating by Plasma Spray Process. Journal Of Materials Engineering And Performance, 25(7) (IF-1.331). pp. 2570-2575.

Mishra, Suman K and Pandey, S and Mahato, K and Shravan Kumar, K and Bysakh, S and Srimani, M and Pathak, L C (2012) Microstructural studies on EB-PVD deposited NiCrAlY, YSZ and lanthanum zirconate for thermal barrier applications. Surface and Coatings Technology, 207 (IF-). pp. 143-148.

Mishra, Suman K and Pathak, L C (2005) Deposition of crystalline C–N film by arc evaporation process. Materials Letters, 59 (27). pp. 3481-3484.

Mishra, Suman K and Pathak, L C (2008) Effect of carbon and titanium carbide on sintering behaviour of zirconium diboride. Journal of Alloys and Compounds, 465 (1-2). pp. 547-555.

Mishra, Suman K and Pathak, L C and Rao, Venkatesh (1997) Synthesis of submicron Ba-hexaferrite powder by a self-propagating chemical decomposition process. Materials Letters, 32 (2-3). pp. 137-141.

Mishra, Suman K and Ranganathan, S and Das, Swapan K and Das, Samar (1998) Investigations on precipitation characteristics in a high strength low alloy (HSLA) steel. Scripta Materialia, 39 (2). pp. 235-259.

Mishra, Suman K and Rupa, P K P and Das, Swapan K and Shcherbakov, V (2006) Effect of alumina diluent on the fabrication of in-situ Al2O3-Ti/ZrB2 composite by self propagating high temperature synthesis dynamic compaction. Metallurgical and Materials Transactions B, 37 (1). pp. 641-647.

Mishra, Suman K and Rupa, P K P and Das, Swapan K and Shcherbakov, V (2007) Effect of titanium diluent on the fabrication of Al2O3–ZrB2 composite by SHS dynamic compaction. Composites Science and Technology, 67 (7-8). pp. 1734-1739.

Mishra, Suman K and Rupa, P K P and Pathak, L C (2006) Nucleation and growth of DC magnetron sputtered titanium diboride thin films. Surface and Coatings Technology, 200 (12-13). pp. 4078-4081.

Mishra, Suman K and Rupa, P K P and Pathak, L C (2007) Surface and nanoindentation studies on nanocrystalline titanium diboride thin film deposited by magnetron sputtering. Thin Solid Films, 515 (17). pp. 6884-6889.

Mishra, Suman K and Shekhar, Chander and Rupa, P K P and Pathak, L C (2007) Effect of pressure and substrate temperature on the deposition of nano-structured silicon–carbon–nitride superhard coatings by magnetron sputtering. Thin Solid Films, 515 (11). pp. 4738-4744.

Mishra, Suman K and Shravan Kumar, K and Bysakh, S and Sreemany, M and Pathak, L C (2014) Investigation of interface, microstructure, and mechanical properties of layered thermal barrier coatings of lanthanum zirconate and YSZ deposited by EB-PVD process. Surface and Interface Analysis, 46(7) (IF-1.393). pp. 449-456.

Mishra, Swati and Nayar, S (2014) Protein-polymer Matrix Mediated Synthesis of Silver Nanoparticles. Nanobiomedicine, 1(3) . pp. 1-5.

Mishra, T (2008) Anion supported TiO2–ZrO2 nanomaterial synthesized by reverse microemulsion technique as an efficient catalyst for solvent free nitration of halobenzene. Catalysis Communications, 9 . pp. 21-26.

Mishra, T (2013) Pillared clay as an effective catalyst for low temperature VOCs decomposition. Key Engineering Materials, 571 . pp. 71-91.

Mishra, T (2020) Prospective of titania based photocatalyst for environmental reduction reactions. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 135-146.

Mishra, T and Hait, Jhumki and Aman, Noor and Gunjan, M K and Mahato, B and Jana, R K (2009) Corrigendum to “Surfactant mediated synthesis of spherical binary oxides photocatalyst with enhanced activity in visible light” [J. Colloid Interface Sci. 327 (2008) 377–383]. Journal of Colloid and Interface Science, 330 (1). 243- .

Mishra, T and Hait, Jhumki and Aman, Noor and Jana, R K (2008) Surfactant mediated synthesis of spherical binary oxides photocatalyst with enhanced activity in visible light. Journal of Colloid and Interface Science, 327 . pp. 377-383.

Mishra, T and Hait, Jhumki and Noor, Aman and Jana, R K and Chakravarty, S (2007) Effect of UV and visible light on photocatalytic reduction of lead and cadmium over titania based binary oxide materials. Journal of Colloid and Interface Science, 316 (1). pp. 80-84.

Mishra, T and Mahato, D K (2016) A comparative study on enhanced arsenic(V) and arsenic(III) removal by iron oxide and manganese oxide pillared clays from ground water. Journal of Environmental Chemical Engineering, 4 (IF-1.355). pp. 1224-1230.

Mishra, T and Mahato, M and Aman, Noor and Patel, J N and Sahu, Ranjan K (2011) A mesoporous WN co-doped titania nanomaterial with enhanced photocatalytic aqueous nitrate removal activity under visible light. Catalysis Science & Technology, 1 (4). pp. 609-615.

Mishra, T and Mohapatra, P and Parida, K M (2008) Synthesis, characterisation and catalytic evaluation of iron–manganese mixed oxide pillared clay for VOC decomposition reaction. Applied Catalysis B Environmental, 79 (http://dx.doi.org/10.1016/j.apcatb.2007.10.030). pp. 279-285.

Mishra, T and Parida, K M (2006) Effect of sulfate on the surface and catalytic properties of iron–chromium mixed oxide pillared clay. Journal of Colloid and Interface Science, 301 (2). pp. 554-559.

Mishra, T and Sahu, Ranjan K and Lim, S -H and Salamanca-Riba, L G and Bhattacharjee, S (2010) Hexadecylamine capped silver and gold nanoparticles: Comparative study on formation and self-organization. Materials Chemistry and Physics, 123 (2-3). pp. 540-545.

Mishra, T and Tiwari, S K (2006) Studies on sorption properties of zeolite derived from Indian fly ash. Journal of Hazardous Materials, 137 (1). pp. 299-303.

Mishra, T and Tiwari, S K and Das, N N and Mahato, B (2003) Synthesis and sorption properties of 13X zeolite derived from coal fly ash. Journal of Metallurgy and materials Science, 45 (4). pp. 193-198.

Mishra, T and Wang, Lei and Hahn, Robert and Schmuki, Patrik (2014) In-situ Cr doped anodized TiO2 nanotubes with increased photocurrent response. Electrochimica Acta, 132 (IF-4.086). pp. 410-415.

Mishra, V and Bhoumik, T and Chakravarty, S and Verma, A K and Sharma, Mamta (2016) Influence of coal quality on combustion behaviour and mineral phases transformations. Fuel, 186 (IF- 4.601). 443-455.

Mishra, V and Chakravarty, S and Finkelman, Robert B. and Varma, Atul K (2019) Geochemistry of Rare Earth Elements in Lower Gondwana Coals of the Talchir Coal Basin, India. Journal of Geochemical Exploration, 204 (IF-3.472). pp. 43-56.

Mishra, V and Sharma, Mamta and Chakravarty, S and Banerjee, A (2016) Changes in organic structure and mineral phases transformation of coal during heat treatment on laboratory scale. International Journal of Coal Science & Technology, 3(4) (IF-0.640). pp. 418-428.

Mishra, V and Singh, K.N. (2017) Microstructural relation of macerals with mineral matter in coals from Ib valley and Umaria, Son-Mahanadi basin, India. International Journal of Coal Science & Technology, 4(2) (IF-). pp. 191-197.

Misra, R D K and Ravi Kumar, B and Somani, M and Karjalainen, L P (2008) Deformation processes during tensile straining of ultrafine/nanograined structures formed by reversion in metastable austenitic steels. Scripta Materialia, 59 (1). pp. 79-82.

Misra, R N and Bhattacharya, H (1963) Tannin method for the estimation of vanadium and its separation from phosphorus. NML Technical Journal, 5 (3). pp. 28-31.

Misra, S B and Kamble, A and Yadav, S and Ranganathan, S (2015) Influence of charge segregation on specific aluminium consumption in production of ferro-titanium. Canadian Metallurgical Quarterly, 54(1) (IF-0.495). pp. 101-109.

Misra, V N and Khangaonkar, P R (1977) Pre-reduction of manganese ore pellets intimately mixed with coke powders. Transactions of the Indian Institute of Metals, 30(2) . pp. 183-185.

Mitra, A and Bhattamishra, A K and Chattoraj, I (1993) Magnetic-properties of hydrogenated amorphous fe-si-b fiber. Journal of Applied Physics, 73 (5). pp. 2443-2446.

Mitra, A and Chen, Z J and Jiles, D C (1995) Nondestructive magnetic measurements in weld and base metals of service exposed Cr-Mo steel. NDT & E International, 28 (1). pp. 29-33.

Mitra, A and Chen, Z J and Laabs, F and Jiles, D C (1997) Micromagnetic Barkhausen emissions in 2 center dot 25 wt% Cr-1wt% Mo steel subjected to creep. Philosophical magazine A-Physics of condensed matter structure defects and mechanical properties, 75 (3). pp. 847-859.

Mitra, A and De, P K and Bhattacharya, D K and Srivastava, P K and Jiles, D C (2004) Ferromagnetic properties of deformation-induced martensite transformation in AISI 304 stainless steel. Metallurgical and Materials Transactions A, 35 (2). pp. 599-605.

Mitra, A and Govindaraju, M R and Jiles, D C (1995) Influence of microstructure on micromagnetic barkhausen emissions in aisi-4140 steel. IEEE Transactions on Magnetics, 31 (6). pp. 4053-4055.

Mitra, A and Jiles, D C (1997) Magnetic Barkhausen emissions in as-quenched Fe-Si-B amorphous alloy. Journal of Magnetism and Magnetic Materials, 168 (1-2). pp. 169-176.

Mitra, A and Kim, H Y and Louzguine, D V and Nishiyama, N and Shen, B and Inoue, A (2003) Magnetic properties of melt-spun and annealed Fe62Co9.5Gd3.5Si10B15 alloy. Journal Of Physics D-Applied Physics, 36 (18). pp. 2234-2238.

Mitra, A and Kim, H Y and Louzguine, D V and Nishiyama, N and Shen, B and Inoue, A (2004) Structure and magnetic properties of amorphous and nanocrystalline Fe40Co40Cu0.5Zr9Al2Si4B4.5 alloys. Journal of Magnetism and Magnetic Materials, 278 (3). pp. 299-305.

Mitra, A and Kim, H Y and Shen, B L and Nishiyama, N and Inuue, A (2003) Crystallization and magnetic properties of Fe40Co40Cu0.5Al2Zr9Si4B4.5 and Fe62Co9.5Gd3.5Si10B15 amorphous alloys. Materials Transactions , 44 (8). pp. 1562-1565.

Mitra, A and Mohapatra, J N and Swaminathan, J and Ghosh, M and Panda, A K and Ghosh, R N (2007) Magnetic evaluation of creep in modified 9Cr–1Mo steel. Scripta Materialia, 57 (9). pp. 813-816.

Mitra, A and Palit Sagar, S and Chattoraj, I (1998) Crystallization and magnetic behaviour of Fe-Nb-Cu-Si-B alloys. Philosophical magazine b-physics of condensed matter statistical mechanics electronic optical and magnetic properties, 77 (6). pp. 1681-1691.

Mitra, A and Palit Sagar, S and Manik, N B (2002) Magnetic Barkhausen emission study in heat-treated Fe-Nb-Cu-Si-B alloy. IEEE Transactions on Magnetics, 38 (6). pp. 3669-3674.

Mitra, A and Panda, A K (2005) Development of nanocrystalline materials for soft-magnetic applications. Transactions of Indian Institute of Metals, 58 (6). pp. 981-991.

Mitra, A and Panda, A K (2008) Development of Ni-Mn-Ga based Ferromagnetic Shape Memory Alloy by Rapid Solidification Technique. Ferromagnetic Shape Memory Alloys Book Series: Advanced Materials Research , 52 . pp. 17-27.

Mitra, A and Panda, A K and Rao, Venkatesh (2001) Gaint magneto-impedance behaviour in amorphous and nanocrystalline soft magnetic materials. Journal of Metallurgy and materials Science, 43 (2). pp. 127-133.

Mitra, A and Panda, A K and Singh, Ratnakar and Rao, Venkatesh and Ramachandrarao, P (2003) Magnetic and structural behaviours of nanocrystalline Fe70.8Nb3.7Cu1Al2.7Mn0.7Si13.5B7.6 alloy. Philosophical Magazine, 83 (12). pp. 1495-1509.

Mitra, A and Panda, A K and Singh, S R and Ramachandrarao, P (2001) Preparation and characterization of Fe–Nb–Cu–Si–B-based nanocrystalline soft magnetic materials. Applied Surface Science, 182 (3-4). pp. 321-325.

Mitra, A and Rao, Venkatesh (1996) Magnetics in automobiles. NML Technical Journal, 38 (3). pp. 81-94.

Mitra, A and Rao, Venkatesh and Mohanty, O N and Ghatak, S K (1994) Magnetic-behavior of amorphous fe40ni40b20 alloy treated isothermally below crystallization temperature. Materials Transactions JIM, 35 (2). pp. 108-111.

Mitra, A and Rao, Venkatesh and Pramanik, S and Mohanty, O N (1992) Crystallization study of amorphous fe40ni40b20 by electrical-resistivity measurement. Journals of Materials Science, 27 (21). pp. 5863-5868.

Mitra, A and Rao, Venkatesh and Pramanik, S and Mohanty, O N (1992) Crystallization study of amorphous Fe40ni40b20 by electrical-resistivity measurement. Journal of Materials Science, 27 (21). pp. 5863-5868.

Mitra, A and Ravi Kumar, B and Mukhopadhyay, N K and Murthy, G V S and Das, Swapan K and Bhattacharya, D K (1996) Residual stress evaluation in service exposed shot peened spring by micromagnetic and XRD techniques. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 879-882.

Mitra, A and Roy, Rajat K and Mahato, B and Panda, A K and Vlasak, G and Janickovic, D and Svec, S P (2011) Development of FeSiB/CoSiB Bilayered Melt-spun Ribbon by Melt-spinning Technique. Journal of Superconductivity and Novel Magnetism, 24(5) . pp. 611-615.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2011) Nanostructured Materials Research at NML. Nano Digest, 3 (4-5). pp. 30-32.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2010) Nanostructured materials: research at NML. Nano Digest, 2 (3). pp. 42-44.

Mitra, A and Sipahi, L B and Govindaraju, M R and Jiles, D C and Ramanan, V R V (1996) Effects of tensile stress on magnetic Barkhausen emissions in amorphous Fe-Si-B alloy. Journal of Magnetism and Magnetic Materials, 153 (1-2). pp. 231-234.

Mittal, M and Keemti, Lal and Gupta, S P (1979) Dimethyl-2-hydroxyacetophenone oxime as an analytical reagent: Spectrophotometric determination of copper (II), nickel (II), cobalt (II) and palladium (II). NML Technical Journal, 21 (3-4). pp. 37-39.

Mittal, M and Nanda, T and Kumar, B Ravi and Singh, V (2017) Effect of inter-critical annealing parameters on ferrite recrystallization and austenite formation in DP 590 steel. Journal Materials and Manufacturing Processes , 32(11) (IF-2.274). 1231-1238 .

Modassir, A and Khajuria, A (2020) Effects of prior austenite grain size on impression creep and microstructure in simulated heat affected zones of boron modified P91 steels. Materials Chemistry and Physics , 249 (IF-3.408).

Modassir, A and Khajuria, A and Bedi, R (2020) Effect of Re-normalizing and Re-tempering on Inter-critical Heat Affected Zone(S) of P91B Steel. Manufacturing Engineering . pp. 255-270.

Modassir, A and Khajuria, A and Pandey, M K and Ahmed, I (2020) Effects of boron modifications on phase nucleation and dissolution temperatures and mechanical properties in 9%Cr steels: sensitivity and stability. Materials Research Express, 6(12) (IF-1.783).

Mohan, B M and Ghosh, Arpita (2008) Analytical structure and stability analysis of a fuzzy PID controller. Applied Soft Computing, 8 . pp. 749-758.

Mohan, B M and Ghosh, Arpita (2008) Analytical Structures for Fuzzy PID Controllers? IEEE Transactions on Fuzzy Systems, 16 (1). pp. 52-60.

Mohan, B M and Ghosh, Arpita (2012) Fuzzy two-term controllers with multi-fuzzy sets: mathematical models and analysis. International Journal of Modelling, Identification and Control (IJMIC), 15(3) . pp. 199-218.

Mohan, B M and Ghosh, Arpita (2007) Influence of cross-point level of membership functions in fuzzy two-term control. International Journal of Automation and Control , 1 (2/3). pp. 133-144.

Mohan, B M and Ghosh, Arpita (2008) Mathematical models of the simplest fuzzy PI/PD controllers with skewed input and output fuzzy sets. ISA Transactions , 47 . pp. 300-310.

Mohan, B M and Ghosh, Arpita (2007) On the simplest fuzzy two - term controller structure derived via algebraic product t-norm -bounded sum t-conorm - Mamdani minimum inference combination. IEEE Proceedings on Industrial and Information Systems . pp. 97-100.

Mohan, B M and Ghosh, Arpita (2006) The simplest fuzzy PID controllers: mathematical models and stability analysis. Soft Computing - A Fusion of Foundations, Methodologies and Applications, 10 . pp. 961-975.

Mohan, B M and Ghosh, Arpita (2008) The simplest fuzzy two-term controllers: mathematical models and stability analysis. International Journal of Automation and Control, 2 . pp. 5-21.

Mohana Rao, Andavarapu and A, Vidyadhar and Ranjit, Prasad (2021) Beneficiation of difficult-to-wash Indian low volatile coking coal fines by Falcon concentrator. International Journal of Coal Preparation and Utilization . pp. 1-19.

Mohanan, P K and Raghavan, R and Patnaik, S C (1997) Hydrometallurgical extraction and recovery of silver from silver concentrate generated at the zinc electrowinning plant. NML Technical Journal, 39 (2). pp. 77-86.

Mohanasundaram, M and Roy, G G and Prakash, S (2019) Thermodynamic Modelling for Design of Synthetic Slag for Inclusion Removal. Transactions of the Indian Institute of Metals , 72(4) . pp. 1111-1118.

Mohanta, M K and Ranjan, Ritesh and Srivastava, S C (2002) Chemical analysis of BaSO4 in barite bearing concentrates and beneficiation products by wavelength dispersive X-ray fluorescence spectrometry. Journal of Metallurgy and materials Science., 44 (4). pp. 185-190.

Mohanta, Ojaswini and Basumallick, A and Mitra, A and Panda, A K (2010) Enhancement in soft magnetic and ferromagnetic ordering behaviour through nanocrystallisation in Al substituted CoFeSiBNb alloys. Journal of Magnetism and Magnetic Materials, 322 (1). pp. 112-118.

Mohanta, Ojaswini and Ghosh, M and Mitra, A and Panda, A K (2009) Enhanced ferromagnetic ordering through nanocrystallization in cobalt incorporated FeSiBNb alloys. Journal Of Physics D-Applied Physics , 42 (6). 065007.

Mohanta, Ojaswini and Mitra, A and Chattoraj, I (2003) Reversible magnetic and mechanical response in hydrogenated amorphous Fe73.5Nb3Cu1Si13.5B9 alloys. Journal of Magnetism and Magnetic Materials, 266 (3). pp. 296-301.

Mohanta, Ojaswini and Singhbabu, Y N and Giri, S K and Dadhich, D and Das, N N and Sahu, Ranjan K (2013) Degradation of Congo red pollutants using microwave derived SrFe12O19: An efficient magnetic photocatalyst under visible light. Journal of Alloys and Compounds, 564 (IF-2.390). pp. 78-83.

Mohanty, Ashok and Budhwani, Neha and Ghosh, Barun and Tarafder, Mita and Chakravarty, S (2013) Lead content in new decorative paints in India. Environment, Development and Sustainability .

Mohanty, Ashok and Chakladar, S and Mallick, S and Chakravarty, S (2019) Structural characterization of coking component of an Indian coking coal. Fuel, 249 . pp. 411-417.

Mohanty, Ashok and Garg, Niti and Jin, Rongchao (2010) Robust gold nanoparticles stabilized by trithiol for application in chemiresistive sensors. Nanotechnology, 21 . p. 405501.

Mohanty, Ashok and Garg, Niti and Jin, Rongchao (2010) A Universal Approach to the Synthesis of Noble Metal Nanodendrites and Their Catalytic Properties. Angewandte Chemie International Edition, 49 (29). pp. 4962-4966.

Mohanty, Ashok and Kumar, S and Tiwari, S K (2021) Assessment of N-(4H-1,2,4-triazol-4-yl)octanamide as hydrochloric acid corrosion inhibitor for mild steel. Materials Today Communications, 27 .

Mohanty, Ashok and Mondal, Aniruddha (2013) Visible light induced synthesis of fluorescent silver clusters in reverse micelles. Nanoscale, 5 (IF-6.233). pp. 7238-7241.

Mohanty, Ashok and Patra, Trilochan and Dey, Joykrishna (2007) Salt-Induced Vesicle to Micelle Transition in Aqueous Solution of Sodium N-(4-n-Octyloxybenzoyl)-l-valinate. The Journal of Physical Chemistry B, 111 (25). pp. 7155-7159.

Mohanty, Ashok and Sahoo, K L (2013) Technological Interventions for Brassware Clusters. Science & Culture, 79 . pp. 205-206.

Mohanty, Ashok and Tiwari, S K and Mishra, T and Chakravarty, S (2012) Making the Glitter Last – Development of A Novel Lacquer for Copper Based Alloys. Science & Culture, 78 (11-12) . pp. 550-552.

Mohanty, B and Jena, B K and Kandasamy, M and Dalai, N and Sahu, Ranjan K and Kadam, R M and Chakraborty, B and Jena, B (2020) The role of Se vacancies and Fe doping of nickel selenide in the water oxidation reaction. Sustainable Energy and Fuels, 4(6) (IF-5.503). pp. 3058-3065.

Mohanty, J K and Rao, D S and Rao, R Bhima (2000) Mineralogy and pre-concentration of the chromite overburden of the Sukinda Ultramafic Belt, Orissa, India. CIM Bulletin, 93 (1038). pp. 37-43.

Mohanty, S P and Sahu, S K and Mohanty, I and Reddy, M L P and Chakravortty, V (1998) Extraction of uranium(VI) with binary mixture of LIX 984 and naphthenic acid. Solvent Extraction Research and Development, Japan, 5 . pp. 189-198.

Mohanty, Sunati and Das, Suchandan K and Majumder, A K (2020) Artificial neural network modeling and experimental investigation to characterize the dewatering performance of a hydrocyclone. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Online 29th Oct, 2019 .

Mohanty, Sunati and Nayak, B and Konar, J (2017) Beneficiation of High-alumina Bearing Iron-ore Slime: A Case Study From Eastern India. Journal Mineral Processing and Extractive Metallurgy Review , 38(6) (IF- 1.219). pp. 403-410.

Mohanty, Sunati and Swain, Aijit (2022) Design and Simulation Analysis of Dewatering Hydrocyclones. Mining Metallurgy & Exploration . pp. 1277-1284.

Mohapatra, B K and Nayak, B (2003) Mn-olivine from Gangpur Group of rocks, Orissa. Journal Of The Geological Society Of India, 61 (5). pp. 581-587.

Mohapatra, B K and Nayak, B (2005) Petrology of Mn carbonate–silicate rocks from the Gangpur Group, India. Journal of Asian Earth Sciences, 25 (5). pp. 773-780.

Mohapatra, J and Mishraz, D K and Singh, S K and Mahato, B and Mitra, A (2013) Synthesis of Nanocrystalline Co Doped ZnO by Chemical Route and Its Magnetic Properties. Nanoscience and Nanotechnology letters, 5/5 . pp. 563-567.

Mohapatra, J N and Bandopadhyay, N R and Gunjan, M K and Mitra, A (2010) Study of high-temperature ageing and creep on bainitic 5Cr–0.5Mo steel by magnetic NDE techniques. Journal of Magnetism and Magnetic Materials, 322 (6). pp. 589-595.

Mohapatra, J N and Panda, A K and Gunjan, M K and Bandopadhyay, N R and Mitra, A and Ghosh, R N (2007) Ageing behavior study of 5Cr–0.5Mo steel by magnetic Barkhausen emissions and magnetic hysteresis loop techniques. NDT & E International, 40 (2). pp. 173-178.

Mohapatra, J N and Panda, A K and Gunjan, M K and Mitra, A (2006) Evaluation of ageing behavior in modified 9Cr-1Mo steel by magnetic barkhausen emission technique. Journal of Metallurgy and Materials Science, 48 (3). pp. 167-171.

Mohapatra, J N and Panda, A K and Mitra, A (2009) Magnetic properties evaluation of ageing behaviour in water-quenched 5Cr-0.5Mo stee. Journal Of Physics D-Applied Physics , 42 (9). 095006.

Mohapatra, J N and Ray, Ashok K and Swaminathan, J and Mitra, A (2008) Creep behaviour study of virgin and service exposed 5Cr–0.5Mo steel using magnetic Barkhausen emissions technique. Journal of Magnetism and Magnetic Materials, 320 (18). pp. 2284-2290.

Mohapatra, J N and Swaminathan, J and Ghosh, M K and Mitra, A (2010) Magnetic Nondestructive Evaluation of Creep Behavior in Water-Quenched Modified 9Cr-1Mo Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 41A (4). pp. 900-905.

Mohapatra, M and Mishra, D and Anand, S and Das, R P (2000) Aqueous reduction of cobalto-cobaltic oxides in ammoniacal medium using ammonium sulphite as the reductant. Hydrometallurgy . pp. 193-202.

Mohapatra, P and Mishra, T and Parida, K M (2006) Effect of microemulsion composition on textural and photocatalytic activity of titania nanomaterial. Applied Catalysis A: General, 310 . pp. 183-189.

Mohta, Keshav and Gupta, Suneel K and Soupramanien, C and Swaminathan, J and Chattopadhyay, J (2020) High temperature deformation behavior of Indian PHWR Calandria material SS 304L. Nuclear Engineering and Design, 368 (IF-1.620).

Molnar, L P (1970) Utilisation of iron ore fines & coal dusts for direct steel production in India-Scope for mini-steel plants. NML Technical Journal, 12 (4). pp. 93-96.

Mondal, S and Mohanasundaram, M and Sau, D C and Gupta, R K and Kumar, Manoj and Paul, K K and Sirshendu, Dey (2016) Modeling heat transfer of the electrothermal reactor for magnesium production. International Journal of Thermal Sciences, 102 (IF-3.615). pp. 274-284.

Mondal, Sudipta and Saha, M B and Ray, Ajoy K (2001) Processing and characterisation of Ag-Cu- Ti brazing alloys. Journal of Metallurgy and materials Science, 43 (1). pp. 17-23.

Moon, Gyeonghye and Park, Hongki and Yoo, Kyoungkeun and Jha, Manis K and Alorro, Richad Diaz and Kim, Ju Yup (2015) The Determination of Chemical Forms of Heavy Metals in Shooting Area Contaminated Soil Using Sequential Extraction Method. Journal of Soil and Groundwater Environment, 20(6) . pp. 111-116.

Mucsi, G and Molnar, Zoltan and Kumar, Sanjay (2014) Geopolymerisation of Mechanically Activated Lignite and Brown Coal Fly Ash. Acta Physica Polonica A, 126 (IF-0.604). pp. 994-998.

Mucsi, Gabor and Kumar, Sanjay and Csoke, Barnabás and Kumar, Rakesh and Molnár, Zoltán and Rácz, Ádám and Mádai , Ferenc and Debreczeni , Ákos (2015) Control of geopolymer properties by grinding of land filled fly ash. International Journal of Mineral Processing, 143 (IF-1.31). pp. 50-58.

Mukherjee, A N and Mukherjee, K P and Altekar, V A (1983) Development of high output Al-anode (Hopal) for cathodic protection. NML Technical Journal, 25 (1-2). pp. 20-24.

Mukherjee, A N and Rao, Addanki S and Banerjee, T and Lahiri, A K (1966) Chromate passivation of aluminium and copper. NML Technical Journal, 8 (4). pp. 22-27.

Mukherjee, J K (1973) Sintered maraging alloys. International journal of powder metallurgy , 9 (2). pp. 95-100.

Mukherjee, J K (1971) Studies on the mechanical properties of Ni-Mn maraging steels. NML Technical Journal, 13 (3). pp. 65-68.

Mukherjee, J K and Banerjee, T (1969) Studies on nickel-manganese managing steels. NML Technical Journal, 11 (1). pp. 28-35.

Mukherjee, J K and Lahiri, A K and Banerjee, T (1968) Studies on the structural properties of rust from ancient iron. NML Technical Journal, 10 (1). pp. 25-29.

Mukherjee, K and Matlock, DK (2016) Simulation of bar rolling in gleeble. Journal of Metallurgy and Materials Science, 51(1) (IF- 0.04). pp. 65-68.

Mukherjee, K and Prakash, S (2011) Cold Simulation of momentum transfer of a metal droplet falling through slag systems possessing net-work structured fluids. Chemical Engineering Science, 66 (6). pp. 1027-1037.

Mukherjee, K and Prakash, S (2009) Studies on RTD of Metalloids in the Blast Furnace. Journal Of Iron And Steel Research International, 16 (Part.2 Suppl.2). pp. 1101-1107.

Mukherjee, K and Prakash, S and Sinha, S N and Mehrotra, S P (2007) Cold simulation of metalloids transport in blast furnaces. Steel Research International, 78 (4). pp. 281-289.

Mukherjee, K P (1966) Internal corrosion of tankers and its prevention. NML Technical Journal, 8 (4). pp. 28-31.

Mukherjee, K P and Khan, D K (1970) Some observations on manganese steel bimetallic couples from the point of view of cathodic protection. NML Technical Journal, 12 (3). pp. 78-82.

Mukherjee, K P and Lahiri, A K (1964) Development of aqueous non-sludge forming zinc phosphate bath. NML Technical Journal, 6 (4). pp. 23-27.

Mukherjee, K P and Lahiri, A K and Banerjee, T (1960) Brown spots on Aluminium circles developed during storage. NML Technical Journal, 2 (2). pp. 23-26.

Mukherjee, K P and Lahiri, A K and Banerjee, T (1962) Corrosion of mild steel in saturated brine solution. NML Technical Journal, 4 (3). pp. 8-12.

Mukherjee, K P and Lahiri, A K and Banerjee, T (1961) Corrosion of steam turbine bladings -A case study. NML Technical Journal, 3 (3). pp. 25-28.

Mukherjee, K P and Lahiri, A K and Banerjee, T (1960) Erosion of induced draft fan in thermal power station. NML Technical Journal, 2 (3). pp. 7-11.

Mukherjee, K P and Lahiri, A K and Banerjee, T (1970) Stainless steel corrosion - A Case Study. NML Technical Journal, 12 (2). pp. 44-48.

Mukherjee, R and Sahu, T and Sen, S and Sahu, Puspendu (2011) Structural and microstructural evolution due to increasing Co substitution in Ni1−xCoxFe2O4: An X-ray diffraction study using the Rietveld method. Materials Chemistry and Physics, 128 (3). pp. 365-370.

Mukherjee, S and Barat, K and Sivaprasad, S and Tarafder, S and Kar, S K (2019) Elevated temperature low cycle fatigue behaviour of Haynes 282 and its correlation with microstructure – Effect of ageing conditions. Materials Science and Engineering: A, 762 . p. 138073.

Mukherjee, S P and Kumar, Rajendra (1972) Metallographic studies of precipitation in iron-5% titanium steels. Metallography, 5 (6). pp. 479-484.

Mukherjee, Shreya and Sivaprasad, S and Tarafder, Soumitra and Bhattacharyya, D and Kar, Sujoy Kumar (2022) Influence of ageing on high temperature tensile deformation of a Ni- based superalloy, HAYNES 282. Journal of Alloys and Compounds, 917 .

Mukherjee, Surojit and Raole, P M and Kumar, A and Chattoraj, I and Rao, K R M and Manna, I (2004) Studies on low-energy nitrogen plasma immersion ion implantation on austenitic stainless steel and Cu-strengthened HSLA-100 steel. Surface and Coatings Technology, 186 (1-2). pp. 282-286.

Mukherji, A N (1995) Development of aluminium anodes for cathodic protection. NML Technical Journal, 37 (1). pp. 13-24.

Mukherji, A N and Dey, A K and Rao, Addanki S and Singh, M N (1977) Evaluation tests on different Protective coatings in marine atmosphere. NML Technical Journal, 19 (1). pp. 21-27.

Mukherji, A N and Lahiri, A K (1972) Case of failure of stainless steel belt in alkali. NML Technical Journal, 14 (3). pp. 110-112.

Mukherji, A N and Mishra, G S and Banerjee, M K (1994) An approach to galvanic corrosion. NML Technical Journal, 36 (4). pp. 157-166.

Mukherji, A N and Prabhakaram, P (1978) Diffusion coatings on steel. Anti-Corrosion Methods and Materials, 25 (1). pp. 5-12.

Mukhopadhyay, Amartya and Basu, Bikramjit and Das Bakshi, Srimanta and Mishra, Suman K (2007) Pressureless sintering of ZrO2–ZrB2 composites: Microstructure and properties. International Journal of Refractory Metals and Hard Materials, 25 (2). pp. 179-188.

Mukhopadhyay, C.K and Haneef, T.K and Metya, Avijit Kr and Murthy, G V S (2015) Acoustic emission monitoring during hydrotesting of a mounded LPG storage vessel of petrochemical industry. Strength, Fracture and Complexity, 9(4) (IF-0.76). pp. 251-264.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2013) Grain size softening effect in Al62.5Cu25Fe12.5 nanoquasicrystals. Applied Physics Letters, 103 (IF-3.79). p. 201914.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2014) Inverse Hall Petch Like Mechanical Behaviour in Nanophase Al-Cu-Fe Quasicrystals: A New Phenomenon. Acta Physica Polonica A , 126(2) (IF-0.604). pp. 543-548.

Mukhopadhyay, N K and Ali, F and Srivastava, V C and Yadav, T P (2011) Strain-induced structural transformation of single-phase Al-Cu-Fe icosahedral quasicrystal during mechanical milling. Philosophical Magazine, 91 (19-21). pp. 2482-2490.

Mukhopadhyay, N K and Bhatt, Jatin and Pramanick, A K and Murty, B S and Paufler, P (2004) Synthesis of nanocrystalline/quasicrystalline Mg32(Al,Zn)49 by melt spinning and mechanical milling. Journal of Materials Science, 39 (16-17). pp. 5155-5159.

Mukhopadhyay, N K and Chattopadhyay, K and Ranganathan, S (1996) Ordering transformation in icosahedral quasicrystals and related crystalline phases. Bulletin of Materials Science, 19 (5). pp. 717-723.

Mukhopadhyay, N K and Das, Swapan K and Ravi Kumar, B and Ranganath, V R and Ghosh Chowdhury, S (1997) Premature failure of a leaf spring due to improper materials processing. Engineering Failure Analysis, 4 (3). pp. 161-170.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Das, Goutam and Chattoraj, I and Das, S K and Bhattacharya, D K (1998) An investigation of the failure of low pressure steam turbine blades. Engineering Failure Analysis, 5 (3). pp. 181-193.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Sinha, R K and Bhattacharya, D K and Chaudhuri, S (1999) Remaining life estimation of a service exposed economiser tube. Engineering Failure Analysis, 6 (4). pp. 233-243.

Mukhopadhyay, N K and Kurup, Vinod and Srivastava, V C and Joshi, P B and Mandal, R K (2004) High energy ball milling of a Al65Cu20Fe15 quasicrystalline alloy. Journal of Non-Crystalline Solids, 334-335 . pp. 52-56.

Mukhopadhyay, N K and Murthy, G V S (2002) An investigation on the transformation of the decagonal phase to a B2 phase in Al–Cu–Co alloy during mechanical milling. Journal of Alloys and Compounds, 342 (1-2). pp. 38-41.

Mukhopadhyay, N K and Murthy, G V S and Murty, B S and Weatherly, G C (2002) An investigation on the transformation of the decagonal phase to a B2 phase in Al-Cu-Co alloy during mechanical milling. Journal of Alloys and Compounds , 342 (1-2). pp. 38-41.

Mukhopadhyay, N K and Murthy, G V S and Murty, B S and Weatherly, G C (2002) An investigation on the transformation of the decagonal phase to a B2 phase in Al-Cu-Co alloy during mechanical milling. Journal of Alloys and Compounds, 342 (1-2). pp. 38-41.

Mukhopadhyay, N K and Murthy, G V S and Murty, B S and Weatherly, G C (2002) Transformation of the decagonal quasicrystalline phase to a B2 crystalline phase in the Al-Cu-Co system by high-energy ball milling. Philosophical Magazine Letters Online ISSN 1362-3036, 82 (7). pp. 383-392.

Mukhopadhyay, N K and Sinha, Arvind (1997) Quasicrystals. Current Science, 73 (7). pp. 558-560.

Mukhopadhyay, N K and Sridhar, G and Parida, N and Tarafder, S and Ranganath, V R (1999) Hydrogen embrittlement failure of hot dip galvanised high tensile wires. Engineering Failure Analysis, 6 (4). pp. 253-265.

Mukhopadhyay, N K and Uhlenwinkel, V and Srivastava, V C (2015) Synthesis and Characterization of Bulk Al-Cu-Fe Based Quasicrystals and Composites by Spray Forming. Journal of materials engineering and performance, 24(6) (IF-0.98). pp. 2172-2178.

Mukhopadhyay, S (1999) Relaxation effects on thermally induced vibrations in a generalized thermoviscoelastic medium with a spherical cavity. Journal of thermal stresses, 22 (9). pp. 829-840.

Muller, Paul H and Oehler, Roland E (1961) Latest Developments in Aluminium Reduction. NML Technical Journal, 3 (1). pp. 29-36.

Munda, Parikshit and Das, Swapan K (2016) Failure analysis of an aeroengine compressor blade: A case study. IIM Metal News, 19(3) (NON-SCI). pp. 17-19.

Munda, Parikshit and Dube, R K and Basu, Bikramjit and Koria, S C (2009) Friction and wear properties of steel backed Al–10Sn–4Si–1Cu metallic strips prepared via spray atomization–deposition-rolling route. Surface & Coatings Technology, 203 (23). pp. 3541-3548.

Munda, Parikshit and Husain, M M and Rajnikanth, V and Metya, A K (2018) Evolution of Microstructure During Short-term Overheating Failure of a Boiler Water Wall Tube Made of Carbon Steel. Journal of Failure Analysis and Prevention, 18(1) (IF-0.40). pp. 199-211.

Munda, Parikshit and Husain, M M and Soni, M K and Kumar, P and Rajnikanth, V (2019) Metallurgical Investigation of the Collapsed Front Structure of a Dragline in a Coal Mine. Journal of Failure Analysis and Prevention , 19(1) . pp. 161-176.

Munda, Parikshit and Hussain, M M and Singh, C V and Bagui, S (2020) Failure Analysis of a Steam Superheater Tube of a Vacuum Distillation Unit (VDU) in a Petrochemical Industry. Journal of Failure Analysis and Prevention, 20 (IF-0.800). pp. 1896-1906.

Munda, Parikshit and Kumar, S and Prakash, Amit and Husain, M M and Rajnikanth, V and Ghosh Chowdhury, S (2016) Failure Investigation of Boiler Water Wall Tubes of a Thermal Power Station. Journal of Failure Analysis and Prevention, 16(1) (IF 0.469). pp. 9-18.

Muralikrishna, A and Bagui, S and Mazumdar, D (2013) Modeling and Measurements of Intermixing Time in a Water Model of a Four Strand Steelmaking Tundish System. Transaction of Indian Institute of Metal, 66(3) . pp. 281-285.

Murthy, D S R (1990) Microbially enhanced thiourea leaching of gold and silver from lead zinc-sulfide flotation tailings. Hydrometallurgy, 25 (1). pp. 51-60.

Murthy, D S R (1990) Microbially enhanced thiourea leaching of gold and silver from lead zinc-sulfide flotation tailings. Hydrometallurgy, 25 (1). pp. 51-60.

Murthy, D S R (1991) Some studies on the extraction of gold and silver from lead-zinc sulfide flotation tailings through non-cyanide leachants. Transaction of the Indian Institute of Metals, 44 (5). pp. 349-354.

Murthy, D S R and Khan, Z H and Akerkar, D D (1989) A chloridizing roast leach process for the extraction of copper and nickel from bulk sulfide concentrates. Transactions of The Indian Institute of Metals, 42 (2). pp. 149-154.

Murthy, D S R and Kumar, Vinay and Rao, K V (2003) Extraction of gold from an Indian low-grade refractory gold ore through physical beneficiation an thiourea leaching. Hydrometallurgy, 68 (1-3). pp. 125-130.

Murthy, D S R and Kumar, Vinay and Rao, K V (2003) low-grade refractory gold ore through physical beneficiation an thiourea leaching. Hydrometallurgy, 68(1-3) (IF-1.227). pp. 125-130.

Murthy, D S R and Kumar, Vinod and Rao, K V (2003) Extraction of gold from an Indian low-grade refractory gold ore through physical beneficiation and thiourea leaching. Hydrometallurgy, 68 (1-3). pp. 125-130.

Murthy, D S R and Prasad, P M (1996) Leaching of gold and silver from Miller Process dross through non-cyanide leachants. Hydrometallurgy, 42 (1). pp. 27-33.

Murthy, G V S and Anish, K and Jayakumar, T and Ghosh, R N (2009) Characterization Of Precipitation Behavior In Nimonic 263 By Ultrasonic Velocity Measurements. Review Of Progress In Quantitative Nondestructive Evaluation, Vols 28a And 28b , 1096 . pp. 1252-1258.

Murthy, G V S and Das, Goutam and Das, Swapan K and Praveen, Nikhat and Singh, S R (2011) Hardbanding failure in a heavy weight drill pipe. Engineering Failure Analysis, 18 (5). pp. 1395-1402.

Murthy, G V S and Das, Goutam and Das, Swapan K and Sridhar, G (2013) Microstructural investigation of defects in drill pipe. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 271-278.

Murthy, G V S and Das, Swapan K and Ravi Kumar, B (2014) Comprehensive Microstructural Characterization of γ′ in a Nimonic Alloy Using Ultrasonic Velocity Measurements. Metallography, Microstructure, and Analysis, 3(4) . pp. 328-335.

Murthy, G V S and Ghosh, Sabita and Das, Mousumi and Das, Goutam and Ghosh, R N (2008) Correlation between ultrasonic velocity and indentation-based mechanical properties with microstructure in Nimonic 263. Materials Science and Engineering A, 488 (1-2). pp. 398-405.

Murthy, G V S and Patel, D and Sahoo, K L (2016) A study of precipitation behaviour of A356 alloy using ultrasonic velocity measurements. Insight - Non-Destructive Testing and Condition Monitoring, 58 (IF-0.527). pp. 367-372.

Murthy, G V S and Ray, Ashok K and Minj, R K and Mukhopadhyay, N K (1999) Microhardness and Fracture Toughness Studies of Decagonal Quasicrystal in Al-Cu-Co System. Journal of Materials Science Letters, 18 (3). pp. 255-258.

Murthy, G V S and Sridhar, G (2013) Ultrasonic C-Scan evaluation of Ti-Alloy / Al brazed joint. Review of progress in quantitative nondestructive evaluation, 1511 . pp. 1120-1124.

Murthy, G V S and Sridhar, G and Kumar, Anish and Jayakumar, T (2009) Characterization of intermetallic precipitates in a Nimonic alloy by ultrasonic velocity measurements. Materials Characterization, 60 (3). pp. 234-239.

Murthy, H P S (1968) Some material and process considerations in the manufacture of high alumina blast furnace refractories. NML Technical Journal, 10 (1). pp. 30-34.

Murthy, H P S and Chatterjee, A B and Sarkar, N B (1976) Some particulate properties of calcined petroleum coke. NML Technical Journal, 18 (1). pp. 6-9.

Murthy, H P S and Gangadharan, T K (1966) A comparative study of the A.S.T.M thermal conductivity and the Blakeley-Cobb apparatus as instruments for routine measurements of thermal conductivity of refractories. NML Technical Journal, 8 (2). pp. 15-19.

Murthy, H P S and Gangadharan, T K (1967) Properties of some Indian Fire Bricks. NML Technical Journal, 9 (3). pp. 20-23.

Murthy, H P S and Singh, Gurbux (1967) Properties of Indian pouring pit refractories: Pt-1 nozzles. NML Technical Journal, 9 (3). pp. 24-29.

Murthy, H P S and Singh, Minhas Gurbux (1967) Properties of Indian pouring pit refractories: Part II-stoppers. NML Technical Journal, 9 (4). pp. 12-14.

Murthy, SR and Subrahmanyam, N and Akerkar, D D (1981) Processing of bulk copper-nickel sulfide concentrates by electrothermal smelting and matte leaching. Transactions of the Indian Institute of metals, 34 (6). pp. 511-514.

Murty, B S and Kori, S A and Venkateswarlu, K and Bhat, R R and Chakraborty, M (1999) Manufacture of Al–Ti–B master alloys by the reaction of complex halide salts with molten aluminium. Journal of Materials Processing Technology, 89-90 . pp. 152-158.

Murty, B S and Maiti, R and Chakraborty, M (2001) Development of in-situ AI-TiB2 metal matrix composites. Journal of Metallurgy and materials Science, 43 (2). pp. 93-101.

Murugaiyan, Premkumar and Abhinav, Anand and Verma, Rahul and Panda, A K and Mitra, Amitava and Baysakh, Sandip and Roy, Rajat K (2018) Influence of Al addition on structural, crystallization and soft magnetic properties of DC Joule annealed FeCo based nanocrystalline alloys. Journal of Magnetism and Magnetic Materials, 448 (IF-2.630). pp. 66-74.

Murugaiyan, Premkumar and Bedanta, Subhankar and Jena, S K and Panda, A K and Mitra, A and Bysakh, S and Roy, Rajat K (2020) Crystallization and magnetic hardening behaviour of Fe-rich FeSiBNb(Cu) melt-spun alloys. Journal of Magnetism and Magnetic Materials, 502 (IF-2.683). p. 166528.

Murugaiyan, Premkumar and Mitra, A and Jena, S M and Mahato, B and Ghosh, M and Roy, Rajat K and Panda, A K (2021) Grain refinement in Fe-rich FeSiB(P)NbCu nanocomposite alloys through P compositional modulation. Materials Letters, 295 (IF-3.204). p. 129852.

Murugaiyan, Premkumar and Mitra, A and Panda, A K and Kumar, A S and Roy, R K and Manna, K and Srivastava, S K (2019) Electromagnetic interference shielding effectiveness of amorphous and nanocomposite soft magnetic ribbons. Physica B: Condensed Matter, 568 . pp. 13-17.

Murugaiyan, Premkumar and Mitra, A and Patro, A K and Roy, R K and Churyukanovaa, Margarita and Kaloshkin, S and Shuvaeva, E and Panda, A K (2019) Role of P on amorphization, microstructure, thermo-physical and soft magnetic properties of Fe-rich FeB(P)SiNbCu melt-spun alloys. Journal of Magnetism and Magnetic Materials, 492 .

Murugaiyan, Premkumar and Mitra, A and Roy, Rajat K and Panda, Ashis K (2022) Nanocrystallization and Core-loss properties of Fe-rich FeSiBPNbCu nanocrystalline alloy. Journal of Magnetism and Magnetic Materials, 552 .

Murugaiyan, Premkumar and Mitra, Amitava and Patro, A K and Roy, Rajat K and Panda, Ashis K (2023) Magnetostriction of Fe-rich FeSiB(P)NbCu amorphous and nanocrystalline soft-magnetic alloys. Journal of Alloys and Compounds, 960 .

Murugaiyan, Premkumar and Mitra, Amitava and Roy, Rajat K and Bijalwan, P K and Dutta, Monojit and Banerjee, Atanu and Panda, A K (2020) Glass forming ability and soft-magnetic properties of Fe-based glassy alloys developed using high phosphorous pig Iron. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153255.

Murugan, S S and Rajan, T P D (2018) Characterization and heat treatment of Al6061 with and without TiB2. Journal of Metallurgy and Materials Science, 60(2) . pp. 73-78.

Murugananthan, M and Bhaskar Raju, G (2010) Removal of organic dyes and tannins by electrochemical techniques. Photo-electrochemistry & photobiology for the sustainability, 1 (Chapter 8). pp. 189-215.

Murugananthan, M and Bhaskar Raju, G and Prabhakar, S (2004) Removal of sulfide, sulfate and sulfite ions by electro coagulation. Journal of Hazardous Materials, 109 (1-3). pp. 37-44.

Murugananthan, M and Bhaskar Raju, G and Prabhakar, S (2005) Removal of tannins and polyhydroxy phenols by electro-chemical techniques. JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY , 80 (10). pp. 1188-1197.

Murugananthan, M and Bhaskar Raju, G and Prabhakar, S (2004) Separation of pollutants from tannery effluents by electro flotation. Separation and Purification Technology, 40 (1). pp. 69-75.

Murugananthan, M and Latha, S S (2010) Anodic oxidation of ketoprofen- an anti inflammatory drug using boron doped diamond and platinum electrodes. Journal of Hazardous Materials, 180 (1-3). pp. 753-758.

Murugananthan, M and Latha, S S and Bhaskar Raju, G and Yoshihara, S (2010) Anodic oxidation of ketofrofen-an anti-inflammatory drug using boron doped diamond electrode. Journal of Hazardous Materials, 180 . pp. 753-758.

Murugananthan, M and Latha, S S and Bhaskar Raju, G and Yoshihara, S (2011) Role of electrolyte on anodic mineralization of atenolol at boron doped diamond and Pt electrodes. Separation and Purification Technology, 79 . pp. 56-62.

Murugananthan, M and Prabhakar, S and Bhaskar Raju, G (2004) Urban wastewater treatment by electroflotation. Fresenius Environmental Bulletin, 13 (6). pp. 519-523.

Murugesan, A P and Giribaskar, S and Gouthama, (2012) Metallographic studies on deformation microstructures of ECAE processed AA2014 aluminium alloy. Materials Science Forum, 702-703 . pp. 109-112.

Murugesan, A P and Mandal, M and Poddar, Palash and Bagui, Sumanta (2023) Effect of Alloying Elements on the Dry Sliding Wear Characteristics of Gravity-Cast Mg-Sn Based Alloys. Journal of Materials Engineering and Performance .

Murugesan, A P and Rajnikanth, V and Mahato, B and Wegner, Matthias and Witte, M and Wilde, G and Ghosh Chowdhury, S (2017) Concurrent precipitation and associated texture evolution in AA 6082 alloy during high pressure torsion (HPT) processing. Materials Science and Engineering: A, 700 (IF-3.094). 487-494.

Muthkumar, M and Govindaraju, M R and Muthusamy, A and Bhaskar Raju, G (2011) Comparative Study of Electrocoagulation and Electrooxidation Processes for the Degradation of Ellagic. Separation Science and Technology, 46 (2). pp. 272-282.

Muthukumar, M and Karuppiah, P T and Bhaskar Raju, G (2007) Electrochemical removal of CI Acid orange 10 from aqueous solutions. Separation and Purification Technology, 55 (2). pp. 198-205.

Na, Hyunjin and Yoo, Kyoungkeun and Jha, Manis K and Tabelin, Carlito Baltazar (2020) The Separation of Aluminum and Stainless‐Steel  Scraps Using Vibrating Mixed‐Size Ball Bed . Metals, 10 (IF-2.117). 868-1-868-10.

Nachankar, A V and Vaish, A K and Humane, M M and De, P K and Moghe, D V and Pathak, S U (2003) Bake hardening mechanism in steels. Journal of Metallurgy and materials Science, 45 (4). pp. 143-160.

Nag, P S and Mukherjee, K P (1979) Corrosion of steam header in the boiler plant-A case study. NML Technical Journal, 21 (3-4). pp. 25-29.

Nair, Aswathy S and Vasumathi, N and Jayasankar, K and Sreejakumari, S S (2021) Scalable preparation of graphene from graphite ore via mechano-chemical ball milling. Materials and Manufacturing Processes .

Nair, G G and Bhandary, V S and Gupte, P K (1966) Melting and alloying practice in aluminium and its alloys. NML Technical Journal, 8 (3). pp. 19-28.

Nana, Achile and Singla, Rashmi and Epey, Noela and Kassem, N N and Sakue, E N and Rodrigue, C K and Kamseu, E and Kumar, Sanjay and Leonelli, C (2023) Design and characterization of Cameroonian pegmatite-calcined clay binary mortars via geopolymerisation. Journal of Building Engineering, 76 .

Nanda, T and Kumar, B Ravi and Singh, V (2017) A Simplified Micromechanical Modeling Approach to Predict the Tensile Flow Curve Behavior of Dual-Phase Steels. Journal of Materials Engineering and Performance, 26(1) (IF-1.331). pp. 5180-5187.

Nanda, T and Ravi Kumar, B and Bhinder, J (2016) Effect of Isothermal Annealing on Microstructural Morphology of Martensite in a Super-Martensitic Stainless Steel Subjected to Different Prior Conditions. Materials and Manufacturing Processes, 31(8) (IF 2.274). pp. 995-1003.

Nanda, T and Ravi Kumar, B and Sharma, S and Singh, V and Pandey, O P (2017) Effect of thermal cycling process parameters on recrystallization kinetics for processing of fine-grained pure copper. Materials and Manufacturing Processes, 32(1) (IF-2.274). pp. 34-43.

Nanda, T and Ravi Kumar, B and Singh, V (2016) A Thermal Cycling Route for Processing Nano-grains in AISI 316L Stainless Steel for Improved Tensile Deformation Behaviour. Defence Science Journal, 66(5) (IF-0.500). pp. 529-535.

Nanda, T and Singh, V and Singh, G and Singh, M and Kumar, B R (2021) Processing routes, resulting microstructures, and strain rate dependent deformation behaviour of advanced high strength steels for automotive applications. Archives of civil and mechanical engineering, 21(1) .

Nandi, Sukalpan and Kumar, Sunil (2023) Atomistic structural transformation of iron single crystal under bi-axial stretching using classical molecular dynamics simulation. Bulletin of Materials Science, 45(4) .

Nandy, Bikash and Chaudhury, Manoj Kumar and Pal, J and Bhattacharjee, D (2009) Sintering Characteristics of Indian Chrome Ore Fines. Metallurgical and Materials Transactions B, 40 (5). pp. 662-675.

Narain, Raj and Lahiri, A K (1966) Impingement corrosion. NML Technical Journal, 8 (4). pp. 32-37.

Narang, S K (1989) Value engineering in plating and metal finishing: actual practices and possibilities. Transactions of the SAEST, 24 (1).

Narang, S K (1995) Zinc plating - recent developments and practical considerations. NML Technical Journal, 37 (2). pp. 61-67.

Narang, S K and Reddy, K Gopal (1977) Sealing anodized aluminium: recent development. Journal of Electrochemical Society of India, 26 (4). pp. 35-41.

Narasaiah, N and Chakraborti, P C and Maiti, R and Ray, K K (2005) Fatigue Crack Initiation in an Interstitial Free Steel. ISIJ International, 45 (1). pp. 127-132.

Narasaiah, N and Ray, K K (2008) Initiation and growth of micro-cracks under cyclic loading. Materials Science and Engineering A, 474 (1-2). pp. 48-59.

Narasaiah, N and Ray, K K (2005) Small crack formation in a low carbon steel with banded ferrite–pearlite structure. Materials Science and Engineering A, 392 (1-2). pp. 269-277.

Narasaiah, N and Sivaprasad, S and Chattopadhyay, J and Kushwaha, H S and Roos, E and Tarafder, S (2010) Effect of constraint on fracture parameters of piping materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 541-545.

Narasaiah, N and Tarafder, S and Ray, K K (2006) Technique for direct measurement of effective fatigue threshold of materials. Materials Science and Technology, 22 (5). pp. 547-552.

Narasaiah, N and Tarafder, S and Sivaprasad, S (2010) Effect of crack depth on fracture toughness of 20MnMoNi55 pressure vessel steel. Materials Science and Engineering: A, 527 (9). pp. 2408-2411.

Narasimhan, B R V and Gopalakrishnan, R and Srinivasan, R and Viswanathan, P V and Sankaran, C (1997) Biomass leaching of manganese ore. NML Technical Journal, 39 (3). pp. 143-149.

Narasimhan, B R V and Prabhakar, S and Hanumantha Rao, K and Manohar, P and Gnanam, F D (2002) Utilization of ferrous leach liquor to synthesize gamma ferric oxide. Scandinavian Journal of Metallurgy , 31 . pp. 201-205.

Narasimhan, B R V and Prabhakar, S and Manohar, P and Gnanam, F D (2002) Synthesis of gamma ferric oxide by direct thermal decomposition of ferrous carbonate. Materials Letters, 52 . pp. 295-300.

Narasimhan, B R V and Prabhakar, S and Rao, K Hanumantha and Manohar, P and Gnanam, F D (2002) Utilization of ferrous leach liquor to synthesize gamma ferric oxide. Scandinavian Journal Of Metallurgy, 31 (3). pp. 201-205.

Narasimhan, B R V and Satendra, Kumar and Sankara Narayanan, T S N (2011) Synthesis of manganese zinc ferrite using ferrous pickle liquor and pyrolusite ore. Environmental Chemistry Letters, 9 (2). pp. 243-250.

Narayan, S P and Rao, V and Mohanty, O N (1991) Magnetic Property Improvement through Microstructural Modifications in a Commercial Grade HSLA Steel. NML Technical Journal, 33 (1-2). pp. 23-30.

Narayan, S P and Rao, Venkatesh and Das, S and Mohanty, O N (1990) Microstructural and magnetic studies on thermomechanically treated hsla steel. Journal of Magnetism and Magnetic Materials, 88 (1-2). pp. 71-78.

Narayan, S P and Rao, Venkatesh and Mohanty, O N (1991) Microstructural, mechanical and magnetic-properties of high-strength low-alloy steel. Journal of Magnetism and Magnetic Materials, 96 (1-3). pp. 137-144.

Narayanan, P I A (1968) Vote of Thanks. NML Technical Journal, 10 (3). pp. 14-15.

Narayanswamy, C V and Nijhawan, B R (1950) Effect of Manganese on Steel: Literature Report No. 3. Journal of Scientific and Industrial Research, 9A . pp. 52-55.

Naseema, S and Gaurav, B and Ghosh, M and Das, Goutam and Srivastava, V C and Srinivas , Rao K and Gopalakrishna, K (2018) TEM Analysis of Precipitates in a Low Alloy Wear Resistant Steel and Correlating with its Corrosion Behaviour. Advanced Materials Research, 1148 (1148). pp. 75-81.

Nath, Prekshya and Bar, H N and Bhattacharjee, Amit and Sen, I (2024) Designing of novel microstructure and its impact on the improved service temperature mechanical performance of 2nd and 3rd generation advanced intermetallic TiAl alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and processing, 893 .

Nath, S K (2020) Fly ash and zinc slag blended geopolymer: Immobilization of hazardous materials and development of paving blocks. Journal of Hazardous Materials, 387 (IF-9.038). p. 121673.

Nath, S K (2018) Geopolymerization behavior of ferrochrome slag and fly ash blends. Construction and Building Materials, 181 (IF-3.485). pp. 487-494.

Nath, S K and Kumar, Sanjay (2016) Evaluation of the suitability of ground granulated silico-manganese slag in Portland slag cement. Construction and Building Materials, 125 (IF-3.169). pp. 127-134.

Nath, S K and Kumar, Sanjay (2019) Influence of Granulated Silico-Manganese Slag on Compressive Strength and Microstructure of Ambient Cured Alkali-Activated Fly Ash Binder. Waste and Biomass Valorization 10, Issue 7, pp 2045–2055, 10(7) (Waste and Biomass Valorization ). pp. 2045-2055.

Nath, S K and Kumar, Sanjay (2019) Reaction kinetics of fly ash geopolymerization: Role of particle size controlled by using ball mill. Advanced Powder Technology, 30(5) . pp. 1079-1088.

Nath, S K and Kumar, Sanjay (2017) Reaction kinetics, microstructure and strength behavior of alkali activated silico-manganese (SiMn) slag - Fly ash blends. Construction and Building Materials, 147 (IF-3.169). pp. 371-379.

Nath, S K and Kumar, Sanjay (2019) Role of alkali concentration on reaction kinetics of fly ash geopolymerization. Journal of Non- Crystalline Solids, 505 . pp. 241-251.

Nath, S K and Kumar, Sanjay (2020) Role of particle fineness on engineering properties and microstructure of fly ash derived geopolymer. Construction and Building Materials, 233 (IF-4.046). p. 117294.

Nath, S K and Kumar, Sanjay and Kumar, Rakesh (2014) Effect of mechanical activation on cordierite synthesis through solid-state sintering method. Bulletin of Material Science, 37(6) (IF-0.870). pp. 1221-1226.

Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2014) Ambient and Elevated Temperature Geopolymerization Behaviour of Class F Fly Ash. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 126-132.

Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2017) Kinetics study of geopolymerization of fly ash using isothermal conduction calorimetry. Journal of Thermal Analysis and Calorimetry, 127(3) (IF-1.953). pp. 1953-1961.

Nath, S K and Rajshekhar, Y and Alex, T C and Venugopalan, T and Kumar, Sanjay (2017) Evaluation of the Suitability of Alternative Binder to Replace OPC for Iron Ore Slime Briquetting. Transactions of the Indian Institute of Metals, 70(8) (IF- 0.533). pp. 2165-2174.

Nath, S K and Randhawa, N S and Kumar, Sanjay (2022) A review on characteristics of silico-manganese slag and its utilization into construction materials. Resources, Conservation and Recycling, 176 .

Nath, S K and Kumar, Sanjay (2018) Influence of Granulated Silico-Manganese Slag on Compressive Strength and Microstructure of Ambient Cured Alkali-Activated Fly Ash Binder. Waste and Biomass Valorization, 10 (IF-1.337). pp. 2045-2055.

Nath, S K and Kumar, Sanjay (2013) Influence of iron making slags on strength and microstructure of fly ash geopolymer. Construction and Building Materials, 38 (IF-1.834). pp. 924-930.

Nath, S K and Maitra, S and Mukherjee, S and Kumar, Sanjay (2016) Microstructural and morphological evolution of fly ash based geopolymers. Construction and Building Materials, 111 (IF-3.169). pp. 758-765.

Nautiyal, Ashish and Upadhyay, T C (2013) Theoretical study of second order phase transition in hydrogen bonded order-disorder type pyroelectric cerium doped triglycine sulphate (Ce-TGS) Crystal. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 165-181.

Nayak, A K (1973) Thermal and quantitative thermal-analysis of Al-Zn alloys and determination of equilibrium diagram of binary-system. Journal of The Institute Of Metals, 101 (Nov-D). pp. 309-314.

Nayak, A K (1981) Thermodynamic analysis of Al-Zn alloys from calorimetric measurements. NML Technical Journal, 23 (1-2). pp. 3-10.

Nayak, B (2011) Gold in the Beach Placer Sands of Chavakkad-Ponnani, Kerala Coast, India. Journal of the Geological Society of india, 78 (4). pp. 345-348.

Nayak, B (2013) Mineral matter and the nature of pyrite in some high-sulfur tertiary coals of Meghalaya, northeast India. Journal of the Geological Society, 81(2) . pp. 203-214.

Nayak, B and Chakravarty, S and Bhattacharyya, K K (2008) Invisible gold in the high-sulphur Tertiary coals of Northeast India. Current Science, 95 (9). pp. 1334-1337.

Nayak, B and Das, Swapan K and Bhattacharyya, K K (2009) Baddeleyite (ZrO2) in manganese nodules of Central Indian Ocean Basin: An evidence for low temperature mobility of zirconium. Geochimica et Cosmochimica Acta, 73 (13). A933-A933.

Nayak, B and Das, Swapan K and Bhattacharyya, K K (2011) Detrital and authigenic(?) baddeleyite (ZrO2) in ferromanganese nodules of Central Indian Ocean Basin. Geoscience Frontiers, 2 (4). pp. 571-576.

Nayak, B and Das, Swapan K and Munda, Parikshit (2013) Biogenic signature and ultra microfossils in ferromanganese nodules of the Central Indian Ocean Basin. Journal of Asian Earth Sciences, Volume 73, 5 September 2013, Pages 296–305 (IF-2.379). pp. 296-305.

Nayak, B and Halbach, P and Pracejus, B and Münch, U (2014) Massive sulfides of Mount Jourdanne along the super-slow spreading Southwest Indian Ridge and their genesis. Ore Geology Reviews, 63 (IF-3.383). pp. 115-128.

Nayak, B and Meyer, Franz Michael (2017) Manganilmenite in the magnetite ore body from Pokphur area of Nagaland, North East India and the possibility of microdiamonds in the ophiolites of Indo-Myanmar ranges. Current Science, 112(1) (IF-0.843). pp. 155-160.

Nayak, B and Meyer, Franz Michael (2015) Tetrataenite in Terrestrial Rock. American Mineralogist, 100(1) (IF-2.059). pp. 209-214.

Nayak, B and Mohanty, Sunati and Bhattacharyya, P (2012) Heavy Minerals and the Characters of Ilmenite in the Beach Placer Sands of Chavakkad-Ponnani, Kerala Coast, India. Journal of the Geological Society of India, 79 . pp. 259-266.

Nayak, B and Singh, A K and Upadhyay, A K and Bhattacharyya, K K (2009) A note on the characters of some Lower Gondwana coals of West Siang district in the Arunachal Himalaya and their trace element content. Journal of the Geological Society of India, 74 (3). pp. 395-401.

Nayak, B and Vaish, A K and Singh, S D and Bhattacharyya, K K (2010) Petrography, Chemistry and Economic Potential of the Magnetite Ores of Pokphur Area, Nagaland. MEMOIR GEOLOGICAL SOCIETY OF INDIA, 75 . pp. 341-348.

Nayak, B R and Mohapatra, B K (2005) Morpho-chemistry of hematite in manganese-rich formation of Gangpur Group, Orissa. Journal of the Geological Society of India, 66 (4). pp. 486-490.

Nayar, S and Brahma, Amrita and Barat, Bhaswati and Bhattacharyya, D (2004) UDP-Galactose 4-Epimerase from Kluyveromyces fragilis: analysis of its hysteretic behavior during catalysis. Biochemistry, 43 (31). pp. 10212-10223.

Nayar, S and Guha, Avijit (2011) A Novel Biomimetic Material-Glycine-PVA Ferrofluid That Crosses the Blood-Brain Barrier. Journal of Biomedical Nanotechnology, 7 (1). p. 78.

Nayar, S and Guha, Avijit (2009) Waste utilization for the controlled synthesis of nanosized hydroxyapatite. Materials Science and Engineering: C, 29 (4). pp. 1326-1329.

Nayar, S and Mir, Aparna and Ashok, Aarti and Guha, Avijit and Sharma, Vikas (2010) Bovine Serum Albumin Binding and Drug Delivery Studies with PVA-Ferrofluid. Journal of Bionic Engineering, 7 (1). pp. 29-34.

Nayar, S and Palit Sagar, S and Guha, Avijit (2010) Non-destructive evaluation of mechanical properties of poly (vinyl) alcohol-hydroxyapatite nanocomposites. Journal of Materials Science-Materials in Medicine, 21 (4). pp. 1099-1102.

Nayar, S and Pramanick, A K and Guha, Avijit and Mahato, B and Gunjan, M K and Sinha, Arvind (2008) Biomimetic synthesis of hybrid nanocomposite scaffolds by freeze-thawing and freeze-drying. Bulletin of Material Science, 31 (3). pp. 429-432.

Nayar, S and Pramanick, A K and Sharma, Binay Kumar and Das, Goutam and Ravi Kumar, B and Sinha, Arvind (2008) Biomimetically synthesized polymer-hydroxyapatite sheet like nano-composite. Journal of Materials Science: Materials in Medicine, 19 (1). pp. 301-304.

Nayar, S and Pramanick, A K and Sharma, Binay Kumar and Mishra, Rahul Kumar and Bansal, Satyendra Kumar and Prajapati, Amardeep and Sahu, K K and Das, Swapan K and Pathak, L C and Sinha, Arvind (2006) Hydroxyapatite coating on stainless steel pre-coated with bovine serum albumin at ambient conditions. Colloids and Surfaces B: Biointerfaces, 48 (2). pp. 183-187.

Nayar, S and Sinha, Arvind (2003) Protein induced morphosynthesis of calcium carbonate. Journal of Materials Science Letters, 22 (3). pp. 167-170.

Nayar, S and Sinha, Arvind (2004) Systematic evolution of a porous hydroxyapatite–poly(vinylalcohol)–gelatin composite. Colloids and Surfaces B: Biointerfaces, 35 (1). pp. 29-32.

Nayar, S and Sinha, Arvind and Das, Samar and Ramachandrarao, P (2001) In situ synthesis of nanosized cadmium sulfide using bovine serum albumin. Journal of Materials Science Letters, 20 (23). pp. 2099-2100.

Nayar, S and Sinha, M K and Basu, D and Sinha, Arvind (2006) Synthesis and sintering of biomimetic hydroxyapatite nanoparticles for biomedical applications. Journal of Materials Science: Materials in Medicine, 17 (11). pp. 1063-1068.

Nemethy, L (1965) Rare earth metals in stainless steelmaking. NML Technical Journal, 7 (1). pp. 41-48.

Nguyen, N V and Jeong, Jinki and Jha, Manis K and Lee, Jae-chun and Osseo-Asare, Kwadwo (2010) Comparative studies on the adsorption of Au(III) from waste rinse water of semiconductor industry using various resins. Hydrometallurgy, 105 (1-2). pp. 161-167.

Nguyen, N V and Jeong, Jinki and Shin, Doyun and Kim, Byung-Su and Lee, Jae-chun and Pandey, B D (2012) Simultaneous Recovery of Gold and Iodine from the Waste Rinse Water of the Semiconductor Industry Using Activated Carbon. Materials Transactions, 53 (4). pp. 760-765.

Nguyen, N V and Lee, Jae-chun and Jeong, Jinki and Kim, Byung-Su and Pandey, B D (2014) Selective recovery of cobalt, nickel and lithium from sulfate leachate of cathode scrap of Li-ion batteries using liquid-liquid extraction. Metals and Materials International, 20(2) (IF-1.223). pp. 357-365.

Nguyen, N V and Lee, Jae-chun and Jeong, Jinki and Pandey, B D (2013) Enhancing the adsorption of chromium(VI) from the acidic chloride media using solvent impregnated resin (SIR). Chemical Engineering Journal, 219 . pp. 174-182.

Nguyen, N V and Lee, Jae-chun and Jha, Manis K and Yoo, Kyoungkeun and Jeong, Jinki (2009) Copper recovery from low concentration waste solution using Dowex G-26 resin. Hydrometallurgy, 97 (3-4). pp. 237-242.

Nguyen, N V and Lee, Jae-chun and Kim, Soo-kyoung and Jha, Manis K and Chung, Kang-Sup and Jeong, Jinki (2010) Adsorption of gold(III) from waste rinse water of semiconductor manufacturing industries using Amberlite XAD-7HP resin. Gold Bulletin, 43 (3). pp. 200-208.

Nguyen, Quang Chinh and Illy, Judit and Ca, To Duy (1998) Precipitation and GP-zone structures in AlZnMg (Cu, Zn) alloys. NML Technical Journal, 40 (2). pp. 45-49.

Nguyen, T T and Yoo, Kyoungkeun and Jha, Manis K and Park, Jayhyun and Choi, Uikyu and Choe, Hongil and Lee, Jae-chun (2018) Removal of Heavy Metals from Tailing in Citrate Solution with Ferric Chloride. Materials Transactions, 59(10) . pp. 1665-1668.

Nguyen, Tam Thi and Yoo, Kyoungkeun and Jha, Manis K and Park, Jayhyun and Choi, Uikyu and Choe, Hongil and Lee, Jae-chun (2018) Removal of Heavy Metals from Tailing in Citrate Solution with Ferric Chloride. Materials Transactions, Vol. 59(10) . pp. 1665-1668.

Nguyen, Viet Tu and Lee, Jae-chun and Jeong, Jinki and Kim, Byung-Su and Pandey, B D (2015) The Separation and Recovery of Nickel and Lithium from the Sulfate Leach Liquor of Spent Lithium Ion Batteries using PC-88A. Korean Chemical Engineering Research, 53(2) (IF-1.166). pp. 137-144.

Nickson, R and Sengupta, C and Mitra, P and Dave, S N and Banerjee, A K and Bhattacharyya, A and Basu, S and Kakoti, N and Moorthy, N S and Wasuja, M and Kumar, M and Mishra, D S and Ghosh, A and Vaish, D P and Srivastava, A K and Tripathi, R M and Singh, S N and Prasad, R and Bhattacharjee, S and Deverill, P (2007) Current knowledge on the distribution of arsenic in groundwater in five states of India. Journal of Environmental Science and Health Part A-Toxic/Hazardous Substances & Environmental Engineering, 42 (12). pp. 1707-1718.

Nijhawan, B R (1959) Abstracts of Papers Presented at the Symposium on Iron and Steel Industry in India to be held at Jamshedpur. NML Technical Journal, 1 (1). pp. 1-28.

Nijhawan, B R (1964) Growths pattern of iron and steel industry in India's economic development. NML Technical Journal, 6 (2). pp. 13-24.

Nijhawan, B R (1989) The present state and prospects of the world iron and steel industry. NML Technical Journal, 31 (1-4). pp. 3-11.

Nijhawan, B R (1964) Research and development work on the utilisation of metallurgical wastes at the National Metallurgical Laboratory. NML Technical Journal, 6 (1). pp. 50-59.

Nijhawan, B R (1959) The role of National Metallurgical Laboratory in ferrous metallurgical Research and Development in India. NML Technical Journal, 1 (1). pp. 29-40.

Nijhawan, B R (1962) The role of National Metallurgical Laboratory in the research and development of ferro alloy industry in India. NML Technical Journal, 4 (1). pp. 41-50.

Nijhawan, B R (1961) The role of the National Metallurgical Laboratory in Research and Development of Light Metal Industry in India. NML Technical Journal, 3 (1). pp. 56-72.

Nijhawan, B R (1960) Scope of pilot plant research and development at the National Metallurgical Laboratory. NML Technical Journal, 2 (1). pp. 11-23.

Nijhawan, B R (1966) Scope of research and development work on substitute alloys at the National Metallurgical Laboratory. NML Technical Journal, 8 (1). pp. 56-79.

Nijhawan, B R (1965) Scope of research in micro-metallurgy at the National Metallurgical Laboratory. NML Technical Journal, 7 (1). pp. 54-64.

Nijhawan, B R (1962) Some raw materials' problems for iron-making in India. NML Technical Journal, 4 (2). pp. 34-38.

Nijhawan, B R and Gupte, P K and Bhatnagar, S S and Guha, B K and Dhanjal, S S (1967) Substitute Nickel-free Austenitic Stainless Steel. The Journal of the Iron and Steel Institute . pp. 292-304.

Nimbalkar, V M and Rao, B R K and Deshmukha, V P and Shah, A K and Marathe, K V (2011) Development reaction synthesis process of novel Al-alloys -TiB2 metal matrix composites by in-situ. Journal of Metallurgy and Materials Science, 53 (2). pp. 197-203.

Nistala, Harsha and Biswas, A and Sinha, Moni (2015) Heating index : estimation through numerical modeling of the sintering process and its relationship with sinter quality. Journal of Metallurgy and Materials Science, 57(2) . pp. 93-105.

Nivas, R and Das, Goutam and Das, S K and Mahato, B and Kumar, Sanjay and Sivaprasad, K and Singh, P K and Ghosh, M (2017) Effect of Stress Relief Annealing on Microstructure & Mechanical Properties of Welded Joints Between Low Alloy Carbon Steel and Stainless Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 48 A(1) (IF-1.874). pp. 230-245.

Nivas, R and Singh, P K and Das, Goutam and Das, S K and Kumar, S and Mahato, B and Sivaprasad, K and Ghosh, M (2017) A comparative study on microstructure and mechanical properties near interface for dissimilar materials during conventional V-groove and narrow gap welding. Journal of Manufacturing Processes, 25 (IF-2.322). pp. 274-283.

Nodland, David and Ghosh, Arpita and Zargarzadeh, H and Jagannathan, S (2012) Neuro-optimal control of an unmanned helicopter. The Journal of Defense Modeling and Simulation: Applications, Methodology, Technology . pp. 1-14.

Nodland, David and Ghosh, Arpita and Zargarzadeh, H and Jagannathan, S (2014) Neuro-optimal control of an unmanned helicopter. Journal of Defence Modelling and Simulation, 11(1) (IF-). pp. 5-18.

Noor, Aman and Das, N N and Mishra, T (2016) Effect of N-doping on visible light activity of TiO2–SiO2 mixed oxide photocatalysts. Journal Of Environmental Chemical Engineering, 4(1) (IF-1.355). pp. 191-196.

Odusote, J K and Adeleke, A A and Lasode, O A and Malathi, M and Paswan, Dayanand (2019) Thermal and compositional properties of treated Tectona grandis. Biomass Conversion and Biorefinery, 9(3) . pp. 511-519.

Oellers, T and Raghavan, R and Chakraborty, J and Kirchlechner, C and Kostka, A and Liebscher, CH and Dehm, G and Ludwig, A (2018) Microstructure and mechanical properties in the thin film system Cu-Zr. Thin Solid Films, 645 (IF- 1.879). pp. 193-202.

Ogundele, Damilola and Ogundiran, Mary B and Babayemi, Joshua O and Jha, Manis K (2020) Material and Substance Flow Analysis of Used Lead Acid Batteries in Nigeria: Implications for Recovery and Environmental Quality. Journal of Health and Pollution, 10(27) (IF-0.37). pp. 1-12.

Ogundiran, M B and Kumar, Sanjay (2015) Synthesis and characterisation of geopolymer from Nigerian Clay. Applied Clay Science, 108 (IF-2.703). pp. 173-181.

Ogundiran, M B and Kumar, Sanjay (2016) Synthesis of fly ash-calcined clay geopolymers: Reactivity, mechanical strength, structural and microstructural characteristics. Construction and Building Materials, 125 (IF-3.169). pp. 450-457.

Omiogbemi, I M B and Faci, N D and Gummadi, A K and Negash, S M and Sardar, B and Gad, S M and Dagwa, I M and Audu, S T (2023) The Influence of Arc Welding Process on the Mechanical and Microstructural Characteristics of Low Carbon Steel in a Corrosive Environment. Macromolecular Symposia .

Pabi, S K (1976) A Resistometric study of zone Formation in Al-Cu-Mg alloys. NML Technical Journal, 18 (1). pp. 10-13.

Padan, J S and Singh, Onkar and Gupta, K N (1978) Decrepitation behaviour of Lohara iron ore from Maharashtra. NML Technical Journal, 20 (3-4). pp. 35-36.

Padan, J S and Singh, Onkar and Gupta, K N (1978) Decrepitation behaviour of Lohara iron ore from Maharashtra. NML Technical Journal, 20 (3-4). pp. 35-36.

Padan, J S and Singh, Onkar and Kapoor, A N (1973) Raw materials for iron making and their testing. NML Technical Journal, 15 (3). pp. 59-68.

Padhi, K K (2000) Evaluation and improvement of X-ray emission analysis for the recovery values of baryte waste. Journal of Metallurgy and materials Science, 42 (4). pp. 255-267.

Padhi, K K (1998) Observation of x-ray interferences on apatite and secondary phosphate minerals in Sukulu phosphatic soil, Uganda. NML Technical Journal, 40 (2). pp. 63-68.

Padhi, K K (1998) X-ray fluorescence analysis of iron ore using de-jongh's algorithm. NML Technical Journal, 40 (4). pp. 115-122.

Padhi, K K and Biswas, A C and Pandey, L P (1978) Estimation of metallic ferrous and ferric iron. NML Technical Journal, 20 (1-2). pp. 15-19.

Padhi, K K and Biswas, A C and Pandey, L P (1978) Estimation of metallic ferrous and ferric iron. NML Technical Journal, 20 (1-2). pp. 15-19.

Padhi, K K and Pandey, L P (1994) The effect of oxalate concentration and pH of the solution on complete precipitability of tantalum-tannin complex and its determination by molecular absorption spectrophotometry. NML Technical Journal, 36 (3). pp. 111-115.

Padhi, K K and Pandey, L P (1993) Solvent extraction and spectrophotometric determination of niobium in steel with snazox and hydrogen peroxide. NML Technical Journal, 35 (1-2). pp. 24-28.

Padhi, K K and Pandey, L P (1988) Spectrophotometric determination of vanadium in steel with ammonium aurine tricarboxylate. NML Technical Journal, 30 (1-4). pp. 3-5.

Padhi, K K and Pandey, L P (1980) Spectrophotometric study and its application to metals and non-metals. NML Technical Journal, 22 (1-2). pp. 24-28.

Padmanabhan, K A and Basariya, M R (2009) Mesoscopic grain boundary sliding as the rate controlling process for high strain rate superplastic deformation. Materials Science and Engineering A, 527 (1-2). pp. 225-234.

Paetzke, N and Shakhverdova, I P and Levin, A A and Reibold, M and Kochmann, W and Paufler, P and Meyer, D C (2010) Nanoindentation behaviour and microstructure of several wootz-type steels. Journal of Metallurgy and Materials Science, 52 (1). pp. 47-65.

Paidi, A K and Sharma, A and Paidi, V K and Illa, M P and Lee , K S and Lee, S S and Ahu, D and Mukhopadhyay, Amartya (2023) Na2ZrFe(PO4)(3)-A Rhombohedral NASICON-Structured Material: Synthesis, Structure and Na-Intercalation Behavior. Inorganic Chemistry, 62(10) . pp. 4124-4135.

PAL, Jagannath and Prasad, D and T, Venugopalan (2021) MODIFIED COKE BREEZE DISTRIBUTION IN IRON ORE SINTERING - A NOVEL TECHNIQUE OF REDUCING ENERGY CONSUMPTION AND IMPROVING QUALITY. J. Min. Metall. Sect. B-Metall, . 57 (1) (2.4). pp. 73-82.

Pal, Anindya and Metya, Avijit Kumar and Chowdhury, R A and Sinha, A (2020) Structural and Mechanical Behavior of Mechanochemically Synthesized Nanocrystalline Hydroxyapatite from Mercenaria Clam Shells. Transactions of the Indian Ceramic Society, 29(11) . pp. 175-181.

Pal, C K and Sahu, Ranjan K and Singh, R K and Jena, A K (2019) Magnetically recyclable palladium nanoparticles (Fe3O4-Pd) for oxidative coupling between amides and olefins at room temperature. Applied Organometallic Chemistry, 33(8) .

Pal, J (2019) Innovative Development on Agglomeration of Iron Ore Fines and Iron Oxide Wastes. Mineral Processing and Extractive Metallurgy Review, 40(4) (IF-1.615). pp. 248-264.

Pal, J (2006) Thermodynamic analysis of nitrogen removal in EAF by DRI fines injection. Ironmaking & Steelmaking, 33 (6). pp. 466-470.

Pal, J (2016) Utilization of micro fines in iron and steel making process. Steel World, June . pp. 86-90.

Pal, J and Ammasi, A and Bandyopadhyay, B S and Dwarapudi, Srinivas and Paul, I (2022) An innovative approach to replace bentonite in hematite ore pelletizing with organic binder. Mineral Processing and Extractive Metallurgy Review .

Pal, J and Bandopadhyay, D and Singh, D P and Ghosh, Sukomal (2008) A comparative study for smelting of chromite ore, pellets, briquettes and sinter. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 117 (3). pp. 129-136.

Pal, J and Chaudhary, P N and Goswami, M C (2003) Utilisation of LD slag - An overview. Journal of Metallurgy and Materials Science, 45 (2). pp. 61-72.

Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178.

Pal, J and Ghorai, S and Agarwal, Sanjay and Nandi, B and Chakraborty, T and Das, Goutam and Prakash, S (2015) Effect of Blaine Fineness on the Quality of Hematite Iron Ore Pellets for Blast Furnace. Mineral Processing and Extractive Metallurgy Review, 36 (2) (IF-0.690). pp. 83-91.

Pal, J and Ghorai, S and Ammasi, A and Hota, S K and Koranne, V M and Venugopalan, T (2017) Improving reductibility of iron ore pellets by optimization of physical parameters. Journal of Mining and Metallurgy Section B- Metallurgy, 53(1) (IF-0.804). pp. 37-46.

Pal, J and Ghorai, S and Bandyopadhyay, D and Ghosh, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. Journal of Iron and Steel Research, International, 22 (IF-0.675). pp. 916-923.

Pal, J and Ghorai, S and Das, Avimanyu (2015) Development of carbon composite iron ore micropellets by using the microfines of iron ore and carbon-bearing materials in iron making. International Journal of Minerals, Metallurgy and Materials, 22 (IF-0.69). pp. 132-140.

Pal, J and Ghorai, S and Goswami, M C and Bandyopadhyay, D and Ghosh, S (2011) Agglomeration of Waste Iron-oxide for use in Steel Making. Steel Tech, 6 (1). pp. 1-6.

Pal, J and Ghorai, S and Goswami, M C and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) Development of Fluxed iron oxide pellets strengthened by CO2 treatment for use in basic oxygen steel making. ISIJ International, 49 (2). pp. 210-219.

Pal, J and Ghorai, S and Goswami, M C and Prakash, S and Venugopalan, T (2014) Development of Pellet-Sinter Composite Agglomerate for Blast Furnace. ISIJ International, vol 54 (IF-1.069). pp. 620-627.

Pal, J and Ghorai, S and Nandi, B and Chakaborty, T and Das, Goutam and Venugopalan, T (2015) Effect of pyroxenite and olivine minerals as source of MgO in hematite pellet on improvement of metallurgical properties. Journal of Central South University, 22(9) . pp. 3302-3310.

Pal, J and Ghorai, S and Singh, D P and Goswami, M C and Bandopadhyay, D and Ghosh, Dinabandhu (2011) Dissolution Characteristics of CO2-Treated Fluxed Pellets in Hot Metal Bath. Mineral Processing and Extractive Metallurgy Review , 32 (4). pp. 229-246.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2010) Performance Assessment of CO2 Treated Fluxed Iron Oxide Pellets in Basic Oxygen Steel Making Process. ISIJ International, 50 (1). pp. 105-114.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D (2013) Development of Prefused Synthetic Flux for Basic Oxygen Steel Making through Micro-Pelletization and Sintering of Iron Oxide Fines. Steel Research International, 84(11) (IF-0.493). pp. 1115-1125.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D and Ghosh, Sukomal (2013) Development of fluxed micropellets for sintering utilising iron oxide waste fines. Ironmaking & Steelmaking, 40(7) (IF-0.454). pp. 498-504.

Pal, J and Ghorai, S and Venugopalan, T (2020) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 129 (3–4) (IF-0.89). pp. 299-307.

Pal, J and Ghorai , S and Rajshekhar, Y and Koranne, V. M (2017) Development of blast furnace quality pellet optimising blue dust, hard ore and friable ore ratio. Ironmaking and Steelmaking , 44(8) (IF-0.985). pp. 568-576.

Pal, J and Ghosh, S and Goswami, M C and Singh, D P and Kumar, Manoj and Minj, R K and Upadhyay, A K (2007) Role of direct reduced iron fines in nitrogen removal from electric arc furnace steel. Steel Research International, 78 (8). pp. 588-594.

Pal, J and Goswami, M C (2004) Control of silicon in hot metal. Journal of Metallurgy and materials Science, 46 (1). pp. 23-38.

Pal, J and Goswami, M C (2001) Simple mathematical models to control silicon, sulphur and manganese in hot metal during blast furnace operation. Journal of Metallurgy and materials Science, 43 (3). pp. 203-211.

Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.

Pal, J and Goswami, M C and Goel, R P (2005) Some Thermodynamic and Kinetic Aspects of Nitrogen Removal in Arc Furnace Steel Melting. Indian Foundry Journal, 51 (6). pp. 33-40.

Pal, J and Goswami, M C and Mahato, B and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) High Temperature Characterization of CO2 Treated Fluxed Pellets Developed for Basic Oxygen Steel Making. ISIJ International, 49 (9). pp. 1325-1332.

Pal, J and Goswami, M C and Singh, D P (2003) On The Desulphurisation Of Assam Coal With Coke Oven Gas. Transactions of the Indian Institute of Metals, 56 (3). pp. 239-242.

Pal, J and Goswami, M C and Singh, Manjit and Singh, K K (2003) Desulphurisation of high sulphur coal to improve industrial utilisation. Ironmaking & Steelmaking, 30 (6). pp. 441-446.

Pal, J and Singh, S and Ghosh, A K and Mohan, S (2002) A mathematical model for end point control of basic oxygen steel making furnace. Journal of Metallurgy and materials Science, 44 (1). pp. 39-49.

Pal, J and Venugopalan, T (2015) Carbon as in situ energy source in induration of hematite pellets and its effect on pellet properties. Ironmaking and Steelmaking, 42 (IF-0.553). pp. 139-147.

Pal, Jagannath and D, Prasad and T, Venugopalan (2021) Modified coke breeze distribution in Iron ore sintering - A Novel technique of reducing energy consumption and improving quality. Journal of Mining and Metallurgy, Section B: Metallurgy, 57(1) (IF-1.6). pp. 73-82.

Pal, Jagannath and Ghorai, S and Venugopalan, T (2018) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy . (In Press)

PAL, Jagannath and GHORAI, Satadal and BANDYOPADHYAY, Debajyoti and GHOSH, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. JOURNAL OF IRON AND STEEL RESEARCH, INTERNATIONAL, 22(10) (2.1). pp. 916-923.

Pal, Jagannath and Rajshekar, Y and Kumar, Sanjay and Venugopalan, T (2021) Development of carbon composite iron ore slime briquettes for using in ironmaking. Journal of Metallurgy and Materials Science, Vol. 63, No. 1-2, January-June 2021 . pp. 1-11.

PAL, Jagannath and GHORAI, Satadal and BANDYOPADHYAY, Debajyoti and GHOSH, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. JOURNAL OF IRON AND STEEL RESEARCH, INTERNATIONAL. , 22(10): 916-923 (2.1). pp. 916-923.

Pal, Partha Pratim and Mohan, Devendra and Dhoble, Yogesh and Bhattacharjee, S (2016) Adsorption of Cu(II) and Cr(III) by iron powder in aqueous medium. Journal of Metallurgy and Materials Science, 58(1) . pp. 1-8.

Pal, S K and Manik, N B and Mitra, A (2006) Dependence of frequency and amplitude of the ac current on the GMI properties of Co based amorphous wires. Materials Science and Engineering A, 415 (1-2). pp. 195-201.

Pal, S K and Manik, N B and Mitra, A (2006) Dependence of the driving current on the harmonic behavior of giant magneto-impedance voltage of Co-based amorphous wires. Journal of Magnetism and Magnetic Materials, 305 (1). pp. 240-246.

Pal, S K and Panda, A K and Mitra, A (2008) Effect of annealing on the second harmonic amplitude of Giant Magneto-Impedance (GMI) voltage of a Co–Fe–Si–B amorphous wire. Journal of Magnetism and Magnetic Materials, 320 (3-4). pp. 496-502.

Pal, S K and Panda, A K and Vazquez, M and Mitra, A (2006) The effect of magnetoelastic interaction on the GMI behaviour of Fe-, Co- and Co–Fe-based amorphous wires. Journal of Materials Processing Technology, 172 (2). pp. 182-187.

Pal, Sital K and Prakash, S and Madhukar, A and Mehrotra, S P (2007) Evaluation of intellectual property asset value. International Journal of Intellectual Property Management, 1 (3). pp. 171-183.

Palit, S K and Chatterjea, A B (1974) Effect of aluminium and boron on the kinetics and morphology of graphite precipitation during malleablization. NML Technical Journal, 16 (1-2). pp. 10-17.

Palit Sagar, S and Chattoraj, I and Mitra, A (1999) The generation of magnetic bistability in annealed Fe-Si-B fibre by hydrogenation. Journal of Physics D-Applied Physics , 32 (5). pp. 541-545.

Palit Sagar, S and Chattoraj, I and Rao, Venkatesh and Ghatak, S K and Mitra, A (1997) Influence of hydrogen on the magnetic properties of amorphous Fe---Si---B fibres. Journal of Magnetism and Magnetic Materials, 166 (1-2). pp. 186-192.

Palit Sagar, S and Chattoraj, I and Rao, Venkatesh and Ghatak, S K and Mitra, A (1997) Influence of hydrogen on the magnetic properties of amorphous Fe-Si-B fibres (vol 166, pg 186, 1997). Journal of Magnetism and Magnetic Materials, 172 (3). pp. 322-323.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Palit Sagar, S and Hua , Jia Jerry and Rose, Joseph (2010) Ultrasonic Guided Wave Phased Array Inspection of Pipelines. Journal of Non destructive Testing & Evaluation, 9 (2). pp. 33-36.

Palit Sagar, S and Metya, Avijit Kumar and Ghosh, M and Sivaprasad, S (2011) Effect of microstructure on non-linear behavior of ultrasound during low cycle fatigue of pearlitic steels. Materials Science and Engineering A, 528 (6). pp. 2895-2898.

Palit Sagar, S and Metya, Avijit Kumar and Parida, N and Ghosh, R N (2008) Nonlinear ultrasonic to assess localized plastic deformation during high cycle fatigue. Review Of Progress In Quantitative Nondestructive Evaluation, Vol 27a And 27b Book Series: AIP Conference Proceedings, 975 . pp. 1260-1266.

Palit Sagar, S and Miyasaka, C and Ghosh, M and Tittmann, B R (2012) NDE of friction stir welds of Al alloys using high-frequency acoustic microscopy. Non-destructive Testing and Evaluation, 27(4) (IF-0.827). pp. 375-389.

Palit Sagar, S and Murthy, G V S and Das, T K and Prakash, Amit and Goel, U S and Venugopalan, T (2013) Surface Wave Based Ultrasonic Technique for finding the Optimal Grinding Condition of High Speed Steel (HSS) Work Rolls. Steel Research International, 84(2) . pp. 163-168.

Palit Sagar, S and Parida, N and Das, S and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Palit Sagar, S and Parida, N and Das, Samar and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Palit Sagar, S and Ravi Kumar, B and Dobmann, G and Bhattacharya, D K (2005) Magnetic characterization of cold rolled and aged AISI 304 stainless steel. NDT & E International, 38 (8). pp. 674-681.

Palit Sagar, S and Ravi Kumar, B and Ghosh Chowdhury, S and De, P K and Ghosh, R N (2008) Determination of crystallographic texture in cold-rolled copper and stainless steel by spectrum analysis of ultrasonic signal. Scripta Materialia, 58 (7). pp. 595-598.

Pan, L M and Ghosh, R N and MClean, M (1993) Extension of an anisotropic creep model to general high-temperature deformation of a single-crystal superalloy. Journal de Physique IV - Proceedings, 3 (C7). pp. 629-634.

Panda, A K and Basu, S and Mitra, A (2003) Demagnetisation effect and its correction on the measurement of magnetic hysteresis loop of melt-spun ribbons. Journal of Magnetism and Magnetic Materials, 261 (1-2). pp. 190-195.

Panda, A K and Chattoraj, I and Basu, S and Mitra, A (2002) Influence of Quench Rates on the Properties of Rapidly Solidified FeNbCuSiB Alloy. Bulletin of Material Science, 25 (6). pp. 573-575.

Panda, A K and Chattoraj, I and Mitra, A (2001) Crystallization and magnetic properties of rapidly solidified Fe-Nb-M-Si-B (M=Cu, Mn, Pt). Materials Science and Engineering A, 304-306 . pp. 950-953.

Panda, A K and Chattoraj, I and Mitra, A (2000) Structural and soft magnetic properties of Fe73.5Nb3M1Si13.5B9 (M=Cu, Mn, Pt). Journal of Magnetism and Magnetic Materials, 222 (3). pp. 263-270.

Panda, A K and Das, Swapan K and De, P K and Mitra, A (2007) Sintering behaviour of magnetic bulk glassy cores obtained from Fe71Nb3.7Cu1Al3Mn0.8Si13.5B7 alloy powder. Journal of Materials Processing Technology, 184 (1-3). pp. 300-304.

Panda, A K and Das, Swapan K and Mitra, A and Jiles, D C and Lo, C C H (2006) Evaluation of deformation behavior of HSLA-100 steel using magnetic hysteresis technique. IEEE Transactions on Magnetics, 42 (10). pp. 3264-3266.

Panda, A K and Dey, Sushmita and Roy, Rajat K and Singh, Satnam and Mitra, A (2015) Influence of phase transformation on interfacial activity and bend sensitivity of rapidly quenched Fe77.5Si7.5B15/Co72.5Si12.5B15 bilayered magnetostrictive ribbons. Journal of Magnetism and Magnetic Materials, 378 (IF-1.568). pp. 440-446.

Panda, A K and Ghosh, M and Kumar, Arvind and Mitra, A (2008) Magnetic transitions and structure of a NiMnGa ferromagnetic shape memory alloy prepared by melt spinning technique. Journal of Magnetism and Magnetic Materials, 320 (17). pp. 116-120.

Panda, A K and Ghosh Chowdhury, S and Mitra, A and Nishiyama, N (2006) Electron transport behaviour and soft magnetic properties of bulk amorphous Fe72Si4B20Nb4 alloy. Journal of Physics D: Applied Physics, 39 . pp. 3536-3542.

Panda, A K and James, Ajil P and Mohan, Aneesh and Dey, Sushmita and Roy, Rajat K and Mitra, A (2016) Investigation on Transverse Defect and Cavitation Depth in Ferrous Pipe Using Melt Spun FeSiB Ribbon as Magnetostrictive Sensing Element. NDT & E International, 80 (IF-2.726). pp. 15-22.

Panda, A K and Kumar, Arvind and Ghosh, M and Mitra, A (2008) Development of Ni-Mn-Ga-based ferromagnetic shape memory alloy by rapid solidification route. Journal of Magnetism and Magnetic Materials, 320 (20). pp. 730-733.

Panda, A K and Kumari, S and Chattoraj, I and Svec, P and Mitra, A (2005) Effect of Fe addition on the crystallization behaviour and Curie temperature of CoCrSiB-based amorphous alloys. Philosophical Magazine, 85 (7). pp. 1835-1845.

Panda, A K and Kumari, Seema and Chattoraj, I and Ghosh, M and Mitra, A (2007) Electron transport properties of Co71−xFexCr7Si8B14 (x=0, 2, 3.2, 4, 6,8 and 12 at%) amorphous alloys during devitrification. Journal of Magnetism and Magnetic Materials, 308 (1). pp. 65-70.

Panda, A K and Manimaran, A and Basu, S and Mitra, A and Chattoraj, I (2005) Effect of structural evolution and surface morphological changes on the electrochemical response of an FeNbAlMnCuSiB alloy. Journal of Materials Science, 40 (17). pp. 4579-4584.

Panda, A K and Manimaran, A and Mitra, A and Basu, S (2004) AFM surface morphology and magnetic properties of nanocrystalline Fe71Nb3.7Cu1Al3Mn0.8Si13.5B7 ribbons. Applied Surface Science, 235 (4). pp. 475-486.

Panda, A K and Metya, Avijit Kumar and Bar, H N and Roy, Rajat K and Murthy, G V S and Palit Sagar, S and Mitra, A (2012) Non-destructive evaluation for structural health assessment. Science and Culture .

Panda, A K and Mohanta, Ojaswini and Basumallick, A and Mitra, A (2010) Low temperature magnetization behavior in Co36Fe36Si3Al1Nb4B20 (at%) nanostructured alloy. Journal of Magnetism and Magnetic Materials, 322 (23). pp. 3802-3806.

Panda, A K and Mohanta, Ojaswini and Ghosh, M and Mitra, A (2009) Development of Nanostructured CoFe-Based Alloys for High Temperature Magnetic Applications. Journal Of Nanoscience And Nanotechnology, 9 (9). pp. 5600-5603.

Panda, A K and Mohanta, Ojaswini and Kumar, A and Ghosh, M and Mitra, A (2007) A Potential Co36Fe36Si4B20Nb4 nanocrystalline alloy for high temperature soft magnetic applications. Philosophical Magazine, 87 (11). pp. 1671-1682.

Panda, A K and Mohanta, Ojaswini and Mitra, A and Jiles, D C and Lo, C C H and Melikhov, Y (2007) Soft magnetic properties of a high temperature CoFeSiBNb nanocrystalline alloy. Journal of Magnetism and Magnetic Materials, 316 (2). pp. 886-889.

Panda, A K and Ravi Kumar, B and Basu, S and Mitra, A (2003) Crystallization and soft magnetic properties of rapidly solidified Fe73.5Nb3Cu1Si22.5−XBX (X=5, 9, 10, 11.25, 19) alloys. Journal of Magnetism and Magnetic Materials, 260 (1-2). pp. 70-77.

Panda, A K and Roy, Rajat K and Dey, Sushmita and Singh, S and Mitra, A (2013) Functional gradation through preferential crystallisation and interfacial activity in rapidly quenched Fe/Co-based bilayered ribbons for bend sensors. Journal of Applied Physics, 114/2 . 023909.

Panda, A K and Roy, S and Singh, S R and Rao, Venkatesh and Pramanik, S and Chattoraj, I and Mitra, A and Ramachandrarao, P (2001) Effect of quenching rate on the properties of melt-spun FeNbCuSIB ribbons. Materials Science and Engineering A, 304-306 . pp. 457-461.

Panda, A K and Sharan, P K and Murthy, G V S and Roy, P K and Palit Sagar, S and Mitra, A (2011) Generation of Guided Waves Using Magnetostrictive Nanostructured Sensing Elements for Pipe Inspection. Journal of Non Destructive Testing and Evaluation, 10 (3). pp. 6-9.

Panda, A K and Sharan, P K and Roy, Rajat K and Murthy, G V S and Mitra, A (2012) Generation and Detection of Guided waves in a Pipe with Defect using Rapidly Quenched Magnetostrictive Ribbons. Smart Materials and Structures, 21(4) . 045015.

Panda, A K and Singh, S and Das, Swapan K and Mitra, A and Koblischka, M and Jamieson, B and Roy, Subrata (2009) Effect of magnetizing field on the martensitic transformations in a melt spun NiMnGa alloy. Journal Of Physics D-Applied Physics , 42 (24). p. 245004.

Panda, A K and Singh, Satnam and Roy, Rajat K and Ghosh, M and Mitra, A (2011) Effect of Mn incorporation for Ni on the properties of melt spun off-stoichiometric compositions of NiMnGa alloys. Journal of Magnetism and Magnetic Materials, 323 (9). pp. 1161-1169.

Panda, A K and Singh, Satnam and Roy, Rajat K and Mitra, A (2012) Ferromagnetic Shape Memory Alloys (FSMAs) for Magneto-mechanical Applications. Science and Culture .

Panda, Ashis K and Anurag, Kumar and Das, S and Das, T K and Murugaiyan, Premkumar and Roy, Rajat K and Mitra, A (2023) Impact of stress-induced anisotropic modifications on magneto-impedance behavior of rapidly quenched CoFe-based microwires. Journal of Alloys and Compounds, 960 .

Panda, Ashis K and Mohapatra, J N and Murugaiyan, Premkumar and Roy, Rajat K and Mitra, Amitava (2020) Impact of Pre-formed Martensite on the Electromagnetic Properties and Martensitic Transformation Kinetics of Uniaxially Tensile Loaded 304 Stainless Steel. Journal of Materials Engineering and Performance , 29 . pp. 7141-7152.

Panda, Ashis K and Roy, Rajat K and Murugaiyan, Premkumar and Das, S and Das, T K and Mitra, A (2020) Rapidly quenched magnetic materials for functional and sensor applications. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 81-88.

Panda, Bijayalaxmi and Das, S C and Panda, R K (2010) Oxidation of sulfurous acid on a graphite anode in the presence and absence of cobalt ion during electrodeposition of copper from a acidic sulfate bath. Journal of Metallurgy and Materials Science, 52 (3). pp. 231-237.

Panda, D and Tripathy, S and Sabat, R K and Suwas, S and Sahoo, S K (2022) An Investigation on the Correlation Between Microstructure, Texture, and Mechanical Properties of Mg and its Alloys. Journal of Materials Engineering and Performance, 31 . pp. 9183-9199.

Panda, E and Mazumdar, D and Mehrotra, S P (2006) Mathematical modeling of particle segregation during centrifugal casting of metal matrix composites. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science , 37 A (5). pp. 1675-1687.

Panda, P K and Lahiri, A K and Banerjee, T (1971) Pressure dependence of oxidation rate of Cu-40 Mn alloy at 800°C. Scripta Metallurgica, 5 (8). pp. 677-679.

Panda, Rekha and Dinkar, Om Shankar and Choubey, Pankaj K and Parween, Rukshana and Jha, Manis K and Pathak, D D (2022) Recovery of Precious Metal Silver from Scrap Computer Keyboards. The Minerals, Metals & Materials Society 2022 . pp. 71-81.

Panda, Rekha and Dinkar, Om Shankar and Jha, Manis K and Pathak, D D (2020) Hydrometallurgical processing of waste multilayer ceramic capacitors (MLCCs) to recover silver and palladium. Hydrometallurgy, 197 (IF-3.338 ). p. 105476.

Panda, Rekha and Dinkar, Om Shankar and Jha, Manis K and Pathak, D D (2020) Novel approach for selective recovery of gold, copper, and iron as marketable product from industrial effluent. Gold Bulletin, 53 (IF-2.279). pp. 11-18.

Panda, Rekha and Dinkar, Om Shankar and Jha, Manis K and Pathak, D D (2020) Recycling of gold from waste electronic components of devices. Korean journal of Chemical Engineering, 37(1) (IF-2.476). pp. 111-119.

Panda, Rekha and Dinkar, Om Shankar and Kumari, Archana and Gupta, Rajesh and Jha, Manis K and Pathak, D D (2021) Hydrometallurgical processing of waste integrated circuits (ICs) to recover Ag and generate mix concentrate of Au, Pd and Pt. Journal of Industrial and Engineering Chemistry, 93 (IF-5.278). pp. 315-321.

Panda, Rekha and Jha, Manis K and Hait, Jhumki and Kumar, G and Singh, R J and Yoo, Kyoungkeun (2016) Extraction of lanthanum and neodymium from leach liquor containing rare earth metals (REMs). Hydrometallurgy, 165 (IF- 2.605). pp. 106-110.

Panda, Rekha and Jha, Manis K and Lee, Jae-chun and Pathak, D D (2021) Developed Commercial Processes to Recover Au, Ag, Pt, and Pd from E-waste. Rare Metal Technology 2021 . pp. 115-126.

Panda, Rekha and Jha, Manis K and Lee, Jae-chun and Pathak, Devendra Deo (2021) Developed Commercial Processes to Recover Au, Ag, Pt, and Pd from E-waste. Rare Earth Technology . pp. 115-126.

Panda, Rekha and Jha, Manis K and Pathak, D D (2019) Recovery of precious metals from PCBs of e-waste. Journal of Metallurgy and Materials Science, Vol. 61, No. 4 . pp. 213-219.

Panda, Rekha and Jha, Manis K and Pathak, D D and Gupta, Rajesh (2020) Recovery of Ag, Cu, Ni and Fe from the nitrate leach liquor of waste ICs. Minerals Engineering, 158 (IF-3.795). 106584.

Panda, Rekha and Jha, Manis K and Pathak, Devendra Deo and Gupta , Rajesh (2020) Recovery of Ag, Cu, Ni and Fe from the nitrate leach liquor of waste ICs. Minerals Engineering, 158/1 .

Panda, Rekha and Kumari, Archana and Hait, Jhumki and Jha, Manis K (2016) Extraction and separation of zinc and chromium from electroplating effluent. Journal of Metallurgy and Materials Science , 58(4) (IF- 0.04). pp. 181-190.

Panda, Rekha and Kumari, Archana and Jha, Manis K and Hait, Jhumki and Kumar, Vinay and Kumar, J Rajesh and Lee, Jin-Young (2014) Leaching of rare earth metals (REMs) from Korean monazite concentrate. Journal of Industrial and Engineering Chemistry, 20(4) (IF-2.063). pp. 2035-2042.

Panda, Rekha and Kumari, Archana and Jha, Manis K and Pathak, D D (2017) Recuperation of gold from waste printed circuit boards of small electronic devices. Journal of Metallurgy and Materials Science, 59 (4). 181-187.

Panda, Rekha and Parween, Rukshana and Singh, Nityanand and Yoo, Kyoungkeun and Jyothi, Rajesh Kumar and Jha, Manis K (2022) Scrap computer keyboards a sustainable resource for silver (Ag) and low density oil (L D Oil). Sustainable Materials and Technologies .

Panda, S and Devi, N and Sahu, S K (2023) Recent trends in eco-sustainable recycling of energy-critical elements from low-grade and secondary resources. Environmental Science and Pollution Research .

Pande, A M and Gupta, K N (1988) Carbothermic reduction of manganese ore by low temperature carbonised coke. NML Technical Journal, 30 (1-4). pp. 25-32.

Pande, A M and Gupta, K N (1985) Non-coking coal based ironmaking technologies and their relevance to India. NML Technical Journal, 27 (3-4). pp. 25-39.

Pande, A M and Gupta, K N and Altekar, V A (1982) Single cell extraction of zinc and manganese dioxide from zinc sulphide concentrate and manganese ores. Hydrometallurgy, 9 (1). pp. 57-68.

Pande, A M and Gupta, K N and Altekar, V A (1982) Single cell extraction of zinc and manganese-dioxide from zinc-sulfide concentrate and manganese ores. Hydrometallurgy, 9 (1). pp. 57-68.

Pande, A M and Sengupta, P L and Dhananjayan, N and Chakrabarti, H K (1970) Thermal reduction of manganese ores with solid fuels: Part I-charcoal. NML Technical Journal, 12 (3). pp. 65-68.

Pandey, B D and Bagchi, D and Kumar, Vinay (1994) Co-Extraction - Selective Stripping for the Recovery of Nickel and Copper from the Leach Liquor of Ocean Nodules. The Canadian Journal of Chemical Engineering, 72 (4). pp. 631-636.

Pandey, B D and Bagchi, D and Kumar, Vinay (1994) Coextraction - selective stripping for the recovery of nickel and copper from the leach liquor of ocean nodules. Canadian Journal of Chemical Engineering , 72 (4). pp. 631-636.

Pandey, B D and Bagchi, D and Kumar, Vinay and Agrawal, A and Premchand, (2002) Pressure sulpuric acid leaching of a sulphide concentrate to recover copper, nickel and cobalt. Transactions of the Institution of Mining and Metallurgy Section C-Mineral Processing and Extractive Metallurgy, 111 . C106-C109.

Pandey, B D and Cote, G and Bauer, D (1996) Extraction of chromium (III) from spent tanning baths. Hydrometallurgy, 40 (3). pp. 343-357.

Pandey, B D and Cote, G and Bauer, D (1996) Extraction of chromium(III) from spent tanning baths. Hydrometallurgy, 40 (3). pp. 343-357.

Pandey, B D and Jana, R K and Bodas, M G and Kumar, Vinay and Akerkar, D D (1988) Extraction of Copper and Zinc from Complex Sulphide by Solvent Extraction -Electrowinning Route. Journal of Electrochemical Society, 37 (3). pp. 247-251.

Pandey, B D and Jana, R K and Kumar, Vinay and Bodas , M G and Akerkar , D D (1988) Treatment of Polymetallic Sea Nodules by Ammoniacal Reduction Leaching. Transactions of the Indian Institute of Metals, 41 (4). pp. 319-328.

Pandey, B D and Kumar, Vinay (1991) Extraction of copper and nickel from ammoniacal leach liquor of Indian Ocean sea nodules. Hydrometallurgy, 26 (1). pp. 35-45.

Pandey, B D and Kumar, Vinay and Akerkar, D D (1988) Extraction of Copper From Ammoniacal Solution By LIX-84. Transactions of the Indian Institute of Metals, 41 (3). pp. 265-267.

Pandey, B D and Kumar, Vinay and Bagchi, D and Akerkar, D D (1989) Extraction of Nickel and Copper from the Ammoniacal Leach Solution of Sea Nodules by LIX 64N. Ind. Eng.Chem. Res., 28 (11). pp. 1664-1669.

Pandey, B D and Kumar, Vinay and Bagchi, D and Jana, R K and Premchand, (2001) Processing of Tungsten Preconcentrate from Low Grade Ore to Recover Metallic Values. Mineral Processing and Extractive Metallurgy Review: An International Journal, 22 (1). pp. 101-120.

Pandey, J L and Banerjee, M K (1998) Concrete corrosion and control practices - an overview. Anti-corrosion methods and materials, 45 (1). 5 - .

Pandey, J L and Banerjee, M K (1998) Energy conservation with the use of solar selective coatings. Anti-corrosion methods and materials, 45 (1). 16- .

Pandey, J L and Banerjee, M K (1997) High-temperature-resistant (slurry-based) coatings. Anti-corrosion methods and materials, 44 (6). 368- .

Pandey, J L and Narang, S K and Agrawal, A (1996) Processing of defective nickel-plated parts with non-cyanide chemical strippers. NML Technical Journal, 38 (1). pp. 31-35.

Pandey, J L and Prakash, S and Mehta, M L (1990) Effects of varying the zirconium concentration and 1 wt-percent-y on high-temperature oxidation of fe-15wt-percent-Cr-4wt-percent-Al alloy under isothermal and cyclic conditions. Journal of The Less-Common Metals, 159 (1-2). pp. 23-34.

Pandey, J L and Prakash, S and Mehta, M L (1990) Effects of varying the zirconium concentration and 1 wt.% Y on high temperature oxidation of Fe-15wt.%Cr-4wt.%Al alloy under isothermal and cyclic conditions. Journal of the Less Common Metals, 159 ( ). pp. 23-24.

Pandey, J L and Singh, Inder and Singh, M N (1997) Electrochemical corrosion behaviour of heat-treated AISI 304 austenitic stainless steel in inorganic acid mixture. Anti-corrosion methods and materials, 44 (1). 6- .

Pandey, L P (1977) Spectrophotometric determination of vanadium by diphenylcarbazide. NML Technical Journal, 19 (3-4). pp. 45-46.

Pandey, L P (1974) Spectrophotometric determination of vanadium by hydroxylamine hydrochloride. NML Technical Journal, 16 (3-4). pp. 46-48.

Pandey, L P (1973) Spectrophotometric studies on the reduction of vanadium and molybdenum by glucose and fructose. NML Technical Journal, 15 (1). pp. 24-27.

Pandey, L P (1981) Use of x-rays in chemical analysis. NML Technical Journal, 23 (3-4). pp. 46-47.

Pandey, L P and Dasgupta, P and Ghose, A (1976) Spectrophotometric determination of cobalt by thioglycollic acid. NML Technical Journal, 18 (3). pp. 39-41.

Pandey, L P and Ghose, A and Dasgupta, P (1978) Determination of chromium in low-alloy steels by atomic-absorption spectrophotometry. Talanta, 25 (8). pp. 482-483.

Pandey, L P and Gupta, K K and Jha, S N and Dasgupta, P and Chatterjee, N N (1985) Analytical studies of sea bed polymetallic nodules by atomic absorption spectrophotometry. NML Technical Journal, 27 (1-2). pp. 14-16.

Pandey, L P and Gupta, K K and Jha, S N and Dasgupta, P and Chatterjee, N N (1988) Use of lanthanum for eliminating the interferent effect of aluminum in the determination of magnesium in aluminum-alloys by aas. Fresenius zeitschrift fur analytische chemie, 329 (7). p. 795.

Pandey, R S (2015) Mathematical modeling of iron ore pelletization in a straight-grate induration process. Journal of Metallurgy and Materials Science, 57(3) . pp. 179-186.

Pandey, S R and Tripathy, T and Bhagat, R P and Singh, R P (2000) Divided Flocculant addition:way to minimize Flocculant Addition. Metals Materials and Processes, 2000, 12 (1). pp. 27-34.

Pandya, Achal and Saha, D and Singh, J K and Paswan, S and Singh, D D N (2017) Effect of Environmental Pollution on Corrosion Characteristics of 3003 Aluminium Alloy Exposed in Different Parts of India. Transactions of the Indian Institute of Metals, 70(6) (IF-0.533). pp. 1607-1620.

Pandya, Achal and Singh, D D N (2010) The Delhi Iron Pillar: A study of the Corrosion Formed in Areas of Surface Deformation. Metal 2010 : Charleston, South Carolina, USA . pp. 1-6.

Pandya, Achal and Singh, J K (2016) Transformation of chloride contaminated unstable rusts on weathering and plain carbon steels into stable forms by treatment with extract of fruit juice of Indian gooseberry (Amla). Journal of Metallurgy and Materials Science, 58(1) (IF- 0.04). pp. 47-52.

Panindre, Anup M and Ranjan, Nitish and Sahu, Rina (2014) Reclaiming iron from solid wastes via Romelt process. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 163-172.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Coating failure analysis using stress intensity factor and fracture energy. Journal of Metallurgy and materials Science, 45 (1). pp. 11-17.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Electrochemical impedance spectroscopy of cashewnut shell liquid coating system. Journal of Metallurgy and materials Science, 45 (2). pp. 97-101.

Parashar, S K S and Basu, D K and Banerjee, M K (2001) Failure analysis of alkyd coating and its model. Journal of Metallurgy and materials Science, 43 (1). pp. 33-41.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Localised / galvanic corrosion of Mg-Zn-Al alloy. Journal of Metallurgy and materials Science, 45 (3). pp. 137-141.

Parashar, S K S and Basu, D K and Banerjee, M K (2001) Measurement of diffusion layer of temporary surface coatings. Journal of Metallurgy and materials Science, 43 (4). pp. 247-252.

Parashar, S K S and Basu, D K and Banerjee, M K (2002) Role of additives in the phoshating bath. Journal of Metallurgy and materials Science., 44 (4). pp. 191-201.

Parchur, A K and Prasad, A I and Rai, S B and Tewari, R and Sahu, Ranjan K and Okram, G S and Singh, R A and Ningthoujam, R S (2012) Observation of intermediate bands in Eu3+ doped YPO4 host: Li+ ion effect and blue to pink light emitter. AIP Advances, 2 (3). 032119-1.

Pari, Sriram and Jha, Niki S and Ganesan, Thamarai Selvi and Jha, S K (2020) Pulse Electrodeposited Au–WO3 Catalyst from a Water–Ionic Liquid Microemulsion for Photoaccelerated Methanol Electrooxidation. The Journal of Physical Chemistry C, 124(40) (IF-4.270). pp. 21957-21967.

Paria, S (2006) The mixing behavior of n-alkylpyridinium bromide-NP-9 mixed surfactant systems. Colloids And Surfaces A-Physicochemical And Engineering Aspects , 281 (1). pp. 113-118.

Parida, K M and Mishra, T and Das, D (1999) Thermal transformation of trinuclear FeIII/ acetato complex intercalated montmorillonite. Applied Clay Science, 15 . pp. 463-475.

Parida, N (1991) Reliability and life estimation from component fatigue failures below the go-no-go fatigue life limit. Journal of testing and evaluation, 19 (6). pp. 450-453.

Parida, N and Das, Swapan K and Gope, P C and Mohanty, O N (1990) Confidence, and sample-size in fatigue testing. Journal of Testing and Evaluation, 18 (6). pp. 385-389.

Parida, N and Das, Swapan K and Gope, P C and Mohanty, O N (1990) Probability, confidence, and sample-size in fatigue testing. Journal of Testing and Evaluation, 18 (6). pp. 385-389.

Parida, N and Das, Swapan K and Tarafder, S (2009) Failure analysis of railroad wheels. Engineering Failure Analysis, 16 (5). pp. 1454-1460.

Parida, N and Pani, B B and Ravi Kumar, B (1997) Acoustic emission assisted compaction studies on iron, iron-aluminium and iron-cast iron powders. Scripta Materialia, 37 (11). pp. 1659-1663.

Parida, N and Ravi Kumar, B and Bhattacharya, D M (1998) Fatigue damage assessment and detection of onset of crack initiation by x-ray diffraction. Transactions of the Indian Institute of Metals, 51 (2-3). pp. 175-177.

Parida, N and Ravi Kumar, B and Das, Goutam and Murthy, S G N and Bhattacharya, D K (1996) Monitoring the hydrotesting of a new pressure vessel by means of acoustic emission. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 2423-2426.

Parida, N and Sivaprasad, S and Tarafder, S and Ranganath, V R and Bhattacharya, D K (1999) Acoustic emission: A novel technique for the study of fracture micro-mechanisms. Journal of non destructive evaluation, 19 (3). pp. 51-55.

Parida, N and Tarafder, S (2001) Failure analysis of turbo-generator of a 10 MW captive power plant. Engineering Failure Analysis, 8 (3). pp. 303-309.

Parida, N and Tarafder, S and Das, Swapan K and Kumar, P and Das, Goutam and Ranganath, V R and Bhattacharya, D K (2003) Failure analysis of coal pulverizer mill shaft. Engineering Failure Analysis, 10 (6). pp. 733-744.

Park, Ilhwan and Kanazawa, Yuki and Sato, Naoya and Galtchandmani, Purevdelger and Jha, Manis K and Tabelin, Carlito Baltazar and Jeon, Sanghee and Ito, Mayumi and Hiroyoshi, Naoki (2021) Beneficiation of Low-Grade Rare Earth Ore from Khalzan Buregtei Deposit (Mongolia) by Magnetic Separation. Minerals .

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2006) Effect of fretting amplitude and frequency on the fretting corrosion behaviour of tin plated contacts. Surface and Coatings Technology, 201 (6). pp. 2181-2192.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Effect of temperature on the fretting corrosion of tin plated copper alloy contacts. Wear, 262 (3-4). pp. 320-330.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2008) Fretting corrosion of tin-plated contacts. Tribology International, 41 (7). pp. 616-628.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Fretting corrosion of tin-plated contacts: Evaluation of surface characteristics. Tribology International, 40 (3). pp. 548-559.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2006) Fretting wear behaviour of Tin plated contacts: Influence on contact resistance. Surface Review and Letters (srl), 13 (5). pp. 635-644.

Park, Yujin and Eom, Yuik and Yoo, Kyoungkeun and Jha, Manis K (2021) Leaching of Copper from Waste-Printed Circuit Boards (PCBs) in Sulfate Medium Using Cupric Ion and Oxygen. Metals, 11(9) .

Parmar, Kavita and Bhattacharjee, S (2016) Adsorption of Zn(II) ions on Calcium Silicate Precipitation Tube (CaSPT) produced through 'silica garden' route. Hydrometallurgy, 165 (IF- 2.605). pp. 137-142.

Parmar, Kavita and Bhattacharjee, S (2017) Energetically benign synthesis of lanthanum silicate through "silica garden" route and its characterization. Materials Chemistry and Physics, 194 (IF-2.084). pp. 147-152.

Parmar, Kavita and Bhattacharjee, S (2014) Studies on Pb(II) and Cd(II) adsorption by Fe(II) and Fe(III) silicate precipitation tubes in aqueous medium. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 125-135.

Parmar, Kavita and Chaturvedi, Hema T and Akhtar, Md Wasi and Chakravarty, S and Das, S K and Pramanick, A K and Ghosh, M and Panda, A K and Bandopadhyay, N R and Bhattacharjee, S (2009) Characterization of cobalt precipitation tube synthesized through “silica garden” route. Materials Characterization, 60 (8). pp. 863-868.

Parmar, Kavita and Chongder, D and Bandopadhyay, N R and Bhattacharjee, S (2011) Investigation on Cu(II) adsorption on cobalt silicate precipitation tube (CSPT) in aqueous medium. Journal of Hazardous Materials, 185 . pp. 1326-1331.

Parmar, Kavita and Chongder, Durbadal and Bandyopadhyay, N R and Bhattacharjee, S (2012) Synthesis and characterization of Fe(II)-silicate precipitation tube (FeIISPT) as a heavy metal adsorbent and its comparison with Fe(III)-silicate precipitation tube (FeIIISPT). Journal of Metallurgy and Materials Science, 54(3) . pp. 269-277.

Parmar, Kavita and Pramanick, A K and Bandopadhyay, N R and Bhattacharjee, S (2010) Synthesis and characterization of Fe(III)-silicate precipitation tubes. Materials Research Bulletin, 45 (9). pp. 1283-1287.

Parthiban, R and Ghosh Chowdhury, S and Hari Kumar, K C and Sankaran, S (2017) Evolution of microstructure and its influence on tensile properties in thermo-mechanically controlled processed (TMCP) quench and partition (Q&P) steel. Materials Science and Engineering: A, 705 (IF- 3.094). pp. 376-384.

Parveen, Nikhat and Murthy, G V S (2013) Characterization of electrical behavior in modified ilmenite. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 195-200.

Parveen, Nikhat and Murthy, G V S (2011) Determination of elastic modulus in a nickel alloy from ultrasonic measurements. Bulletin of Materials Science, 34 (2). pp. 321-324.

Paswan, D and Ansu, J K and Adeleke, A A and Ikubanni, P P and Christopher, C T and Roy, T K and Palai, P and Malathi, M (2022) Understanding casting behaviour of low carbon high manganese steel through detailed characterization of mould powder and mould top slag. Ironmaking & Steelmaking .

Paswan, Dayanand (2016) An over view on testing of Raw materials. National Workshop on Experimental techniques in extractive metallurgy (ETEM-2016) . pp. 83-92.

Paswan, Dayanand and Malathi, M and Minj, R K and Bandopadhyay, D (2015) Mill Scale: A Potential Raw Material for Iron and Steel Making. Steelworld , 21 . pp. 54-56.

Paswan, Dayanand and Minj, R K and Singh, S D and Vaish, A K and Ghorai, S and Malathi, M and Mehta, K D and Prasad, S and Venugopalan, T (2014) Exploitation of banded hematite quartzite and Jhama coal for the production of higher grade ferro-silicon. IIM Metal News, 17(4) . pp. 23-28.

Paswan, Dayanand and Mistry, D and Sahoo, K L and Srivastava, V C (2013) Development of Iron-based Closed-Cell Foams by Powder Forging and Rolling. Journal of Materials Engineering and Performance, 22(8) (IF-0.915). pp. 2201-2209.

Paswan, Dayanand and Vaish, A K and Singh, S D and Ghorai, S and Malathi, M and Prasad, S and Minj, R K (2014) Production of Alloy Cast Iron from Multi–Metallic Magnetite Ore of Nagaland. Steel World 2013, 19/11 . pp. 36-38.

Paswan, Dayanand and Venugopalan, T and Malathi, M (2017) Process feasibility for reduction of ilmenite pellets with non coking coal and separation of TiO from iron. Journal of Metallurgy and Materials Science, 59(4) . pp. 163-171.

Paswan, S and Singh, J K and Singh, D D N (2020) Effect of lead alloying on corrosion characteristics of galvanized coatings exposed in atmosphere, simulated laboratory and a service environment. Surfaces and Interfaces, 21 . p. 100752.

Patel, Bhargav C and Sinha, Manish K and Tipre, D R and Abhilash, and Dave, S R (2014) A novel biphasic leaching approach for the recovery of Cu and Zn from polymetallic bulk concentrate. Bioresource Technology, 157 (IF-5.039). pp. 310-315.

Patel, N K and Walunj, M G and Kumar, B Ravi (2019) Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel. Journal of Materials Engineering and Performance, 28(3) . pp. 1391-1401.

Pathak, Arvind and Kumar, Sanjay and Jha, Vinay Kumar (2014) Development of Building Material from Geopolymerization of Construction and Demolition Waste (CDW). Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 133-137.

Pathak, B C and Kumar, Arvind and Sahoo, K L and Talukdar, P (2006) Effect of Ni–Mg on the microstructure and properties of Al–(4–5)Fe–1V–1Si alloys. Materials Science and Engineering A, 433 (1-2). pp. 310-315.

Pathak, B N and Mishra, M N and Sahoo, K L (2012) Solidification behavior, microstructure and mechanical properties of Al-(1 to 5)Fe-1V-1Si alloys. Journal of Metallurgy and Materials Science, 54(4) . pp. 291-298.

Pathak, B N and Sahoo, K L and Mishra, Madhawanand (2013) Effect of Machining Parameters on Cutting Forces and Surface Roughness in Al-(1-2) Fe-1V-1Si Alloys. Materials and Manufacturing Processes, 28(4) . pp. 463-469.

Pathak, L C (2004) Fabrication and sintering characteristics of doctor blade YBCO-Ag tapes. Ceramics International, 30 (3). pp. 417-427.

Pathak, L C and Bandyopadhyay, D and Srikanth, S and Das, Swapan K (2001) Effect of heating rates on the synthesis of Al2O3–SiC composites by the self-propagating high-temperature synthesis (SHS) technique. Journal of the American Ceramic Society, 84 (5). pp. 915-920.

Pathak, L C and Mishra, Suman K (2005) A review on the synthesis of Y-Ba-Cu-oxide powder. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 18 (9). R 67-R 89.

Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (1997) A comparative study of YBCO powders prepared by different processes. Journal of Materials Science Letters, 16 (14). pp. 1208-1211.

Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (1999) Degradation of BPSCCO superconductors during processing. Journal of Materials Science, 34 (7). pp. 1619-1624.

Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (2004) Synthesis and sintering characteristics of Y–Ba–Cu-oxide superconductors. Materials Science and Engineering B, 110 (2). pp. 119-131.

Pathak, L C and Mishra, Suman K and Bhattacharyya, D and Chopra, K L (1999) Sintering characteristics of Y-Ba-Cu-oxide-Ag-x superconductors. Journal of Materials Research, 14 (11). pp. 4148-4156.

Pathak, L C and Mishra, Suman K and Das, Swapan K and Bhattacharya, D (2001) Effect of sintering atmosphere on the weak-link behaviour of YBCO superconductors. Physica C: Superconductivity, 351 (3). pp. 295-300.

Pathak, L C and Mishra, Suman K and Srikanth, S (2002) Sintering characteristics of Y-Ba-Cu oxide-Ag-x superconductors under argon atmosphere. Journal of Materials Research, 17 (4). pp. 895-900.

Pathak, L C and Ray, Ashok K and Das, Samar (1999) Carbothermal synthesis of nanocrystalline aluminum nitride powders. Journal of the American Ceramic Society, 82 (1). pp. 257-260.

Pathak, L C and Singh, T B and Das, S and Verma, A K and Ramachandrarao, P (2002) Effect of pH on the combustion synthesis of nano-crystalline alumina powder. Materials Letters, 57 (2). pp. 380-385.

Pathak, L C and Singh, T B and Das, Swapan K (2004) Role of templating agents on the growth morphology of AIPO4. Journal of Materials Science, 39 (12). pp. 4069-4071.

Pathak, L C and Singh, T B and Verma, A K and Ramachandrarao, P (2000) Synthesis of nano-crystalline alumina powder by Sol-gel Process. Journal of Metallurgy and materials Science, 42 (2). pp. 93-104.

Pathak, P N and Chakravorty, N (1991) Barite-Some Observations on its Recovery as a By-Product. NML Technical Journal, 33 (1-2). pp. 17-22.

Pathak, P N and De, T C and Chakravorty, N (1989) Beneficiation studies on limestone from Bihar-A case study. NML Technical Journal, 31 (1-4). pp. 12-17.

Pathak, P N and Dey, Shobhana and Rao, D S and Sahu, K K and Chaterjee, N N (2000) Recycling: An alternative to disposal -A case study on ferro-chrome slag. Journal of Metallurgy and materials Science, 42 (4). pp. 249-253.

Pathak, P N and Rafiuddin, S (1998) Recovery of barite from complex sulphide ores. Metals Materials and Processes, 10 (2). pp. 189-191.

Pathak, Prashant and Karani, Arnab and Shome, M (2016) Development of HSLA steel with high temperature tensile properties. Journal of Metallurgy and Materials Science, 58(2) (IF- 0.04). pp. 57-64.

Pati, B B and Chatterjee, P and Singh, T B and Singh, D D N (1990) Effect of propargyl alcohol on corrosion and hydrogenation of steel in hydrochloric-acid solution. Corrosion, 46 (5). pp. 354-359.

Patil, Deepak C and Kori, S A and Venkateswarlu, K and Das, Goutam and Alhajeri, S N and Langdon, T G (2013) Using ball indentation to determine the mechanical properties of an Al-7475 alloy processed by high-pressure torsion. Journal of Materials Science, 48(13) (IF-2.163). pp. 4773-4779.

Patil, M R and Shivakumar, K S and Rudramuniyappa, M V and Rao, R Bhima (2000) Flotation studies on graphite ores of shivaganga area, Madurai district, Tamilnadu. Journal of Metallurgy and Materials Science, 42 (4). pp. 233-241.

Patra, A S and Gogoi, Gaurangi and Sahu, Ranjan K and Qureshi, M (2017) Modulating the electronic structure of lanthanum manganite by ruthenium doping for enhanced photocatalytic water oxidation. Physical Chemistry Chemical Physics, 19(19) (IF-4.123). pp. 12167-12174.

Patra, S and Hasan, Sk. Md. and Narasaiah, N and Chakrabarti, D (2012) Effect of bimodaldistribution in ferritegrainsizes on the tensileproperties of low-carbonsteels. Materials Science and Engineering A, 538 (15). pp. 145-155.

Pattanaik, M (2000) Dispersion profile of rutile powder in polyacrylic acid solutions by electrokinetics and settling studies. Journal of Metallurgy and materials Science, 42 (4). pp. 227-232.

Pattanayak, S and Dey, Swati and Chatterjee, S and Ghosh Chowdhury, S and Datta, S (2015) Computational intelligence based designing of microalloyed pipeline steel. Computational Materials Science, 104 (IF-1.879). pp. 60-68.

Patty, B B (1991) Corrosion inhibition of steel in methanol-HCl by tetrabutylammonium iodide. Indian Journal of Technology, 29 (12). pp. 595-598.

Patty, B B and Banerjee, M K (1991) Effect of ph and chloride-ions on the dissolution of steel in methanol. Indian Journal of Technology, 29 (1). pp. 35-39.

Patty, B B and Das, C R and Singh, D D N (1995) Role of hydrogen promoters on corrosion and hydrogenation of mild-steel in aqueous and methanolic hydrochloric-acid solutions. Corrosion , 51 (7). pp. 537-543.

Patty, B B and Singh, D D N (1992) Solvents role on hcl-induced corrosion of mild-steel - its control by propargyl alcohol and metal-cations. Corrosion, 48 (6). pp. 442-446.

Paul, S and Das, R C and Das, T (2018) Utilization of polluting CO2 gas to produce copper from low grade ore waste by single stage combined hydro and electrometallurgical process. Journal of Metallurgy and Materials Science, 60(4) . pp. 203-210.

Paul, S K and Roy, S and Sivaprasad, S and Bar, H N and Tarafder, S (2018) Identification of Post-necking Tensile Stress–Strain Behavior of Steel Sheet: An Experimental Investigation Using Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 27(11) (IF-1.094). pp. 5736-5743.

Paul, S K and Roy, S and Sivaprasad, S and Tarafder, S (2019) Forming Limit Diagram Generation from In-Plane Uniaxial and Notch Tensile Test with Local Strain Measurement through Digital Image Correlation. Physical Mesomechanics , 22(4) . pp. 340-344.

Paul, S K and Roy, S and Sivaprasad, S and Tarafder, S (2018) A Simplified Procedure to Determine Post-necking True Stress–Strain Curve from Uniaxial Tensile Test of Round Metallic Specimen Using DIC. Journal of Materials Engineering and Performance, 27(9) (IF-1.094). pp. 4893-4899.

Paul, Surajit Kumar (2016) Prediction of complete forming limit diagram from tensile properties of various steel sheets by a nonlinear regression based approach. Journal of Manufacturing Processes, 23 (IF- 2.322). pp. 192-200.

Paul, Surajit Kumar and Kumar, Sunil and Tarafder, S (2017) Effect of loading conditions on nucleation of nano void and failure of nanocrystalline aluminum: An atomistic investigation. Engineering Fracture Mechanics, 176 (IF-2.151). pp. 257-262.

Paul, Surajit Kumar and Kumar, Sunil and Tarafder, S (2018) Orientation-dependent crack-tip blunting and crack propagation in a single crystal BCC iron. Bulletin of Material Science, 41(6) (IF-1.264). pp. 1-6.

Paul, Surajit Kumar and Roy, Satish and Sivaprasad, S and Bar, H N and Tarafder, S (2017) Local Ratcheting Response in Dissimilar Metal Weld Joint: Characterization Through Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 26(10) (IF-1.331). pp. 4953-4963.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, Mita and Tarafder, S (2010) Simulation of cyclic plastic deformation response in SA333 C–Mn steel by a kinematic hardening model. Computational Materials Science, 48 (3). pp. 662-671.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) Cyclic plastic deformation and cyclic hardening/softening behavior in 304LN stainless steel. Theoretical and Applied Fracture Mechanics, 54 (1). pp. 63-70.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Cyclic plastic deformation and damage in 304LN stainless steel. Materials Science and Engineering A, 528 (15). pp. 4873-4882.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Cyclic plastic deformation behavior in SA333 Gr. 6 C-Mn steel. Materials Science and Engineering A, 528 (24). pp. 7341-7349.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Key issues in cyclic plastic deformation: experimentation. Mechanics of Materials, 43 (11). pp. 705-720.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) Ratcheting and low cycle fatigue behavior of SA333 steel and their life prediction. Journal of Nuclear Materials, 401 . pp. 17-24.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) True stress control asymmetric cyclic plastic behavior in SA333 C–Mn steel. International Journal of Pressure Vessels and Piping, 87 (8). pp. 440-446.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2012) True stress-controlled ratcheting behavior of 304LN stainless steel. Journal of Materials Science, 47 (11). pp. 4660-4672.

Paul, Surajit Kumar and Tarafder, S (2013) Cyclic plastic deformation response at fatigue crack tips. International Journal of Pressure Vessels and Piping, 101 (IF-0.989). pp. 81-90.

Paulose, N and Chandru, Fernando D and Banerjee, A and Sahu, J K and Narendra Babu, S N (2018) Creep–Fatigue Interaction Study on Gas Turbine Engine Alloy. Lecture Notes in Mechanical Engineering . pp. 323-333.

Pazouki, Amir and Yeganeh, Biejan Yousefi (2000) Recovery of lead-zinc from Angouran Mine Iran. Journal of Metallurgy and materials Science, 42 (4). pp. 221-226.

Peravadhanulu, A and Mathur, G P and Altekar, V A (1982) Some experiences on x-ray fluorescence analysis of ores and minerals. NML Technical Journal, 24 (1-2). pp. 12-16.

Pereira, A R M and Hacha, R R and Torem, M L and Merma, A G and Silvas, F P C and Abhilash, (2021) Direct hematite flotation from an iron ore tailing using an innovative biosurfactant. Separation Science and Technology .

Perrin, R and Greffe, A (1962) Some Applications of Rapid Metallurgy to the Manufacture of Ferro Alloys. NML Technical Journal, 4 (1). pp. 20-25.

Perumal, G and Chakrabarti, A and Pati, S and Singh, S and Reddy, V and Grewal, H S and Manivasagam, G and Arora, H S (2020) Limiting platelet adhesion in stainless steel bio-implants through microstructural modification. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 41-48.

Perumal, K E (2004) Metallurgical Variables Leading to Corrosion/ Cracking of Chemical Process Equipments. National Seminar on Corrosion Failures & Mitigation .

Peter, Nicolas J and Duarte, Maria J and Liebscher, Christian H and Srivastava, V C and Uhlenwinkel, Volker and Jägle, Eric A and Dehm, Gerhard (2020) Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale. Journal of Alloys and Compounds, 820 . p. 153149.

Petrovic, M and Fiket, Z and Medunic, G and Chakravarty, S (2022) Mobility of metals and metalloids from SHOS coal ash and slag deposit: mineralogical and geochemical constraints. Environmental Science and Pollution Research, 29(31) . pp. 46916-46928.

Phuong, To Duy (2004) A Study on the precipitations of rare earth metals inclusion phase in Fe-Cr-Ni-RE System. Journal of Metallurgy and materials Science., 46 (4). pp. 233-242.

Phuong, To Duy and Bach, Tran Ngoc (2008) Compositional and Microstructural effect on atmospheric corrosion of weathering steel. Journal of Metallurgy and Materials Science, 50 (1). pp. 23-31.

Phuong, To Duy and Bach, Tran Ngoc and Park, Y H and Lee, Z H (2006) Effect of nitrogen and rare earth metals in duplex stain-less steel on transformation of ferrite-austenite structure. Journal of Metallurgy and Materials Science, 48 (1). pp. 13-21.

Phuong, To Duy and Chien, Pham Tien and Binh, Hoang Thi and Linh, Do Chi (2005) The effect of phase composition and microstructure of 25Cr-6Ni-3Mo-0.25N duplex stainless steel on corrosion resistance. Journal of Metallurgy and Materials Science, 47 (1). pp. 15-23.

Phuong, To Duy and Duyen, Do Thi (2012) Effect of heat treatment on microstructure and hardness of high silicon aluminium alloys. Journal of Metallurgy and Materials Science, 54(2) . pp. 111-117.

Phuong, To Duy and Duyen, Do Thi and Tuan, Le Minh and Thang, Pham Duc and Xuong, Nguyen Khac (2011) Studies on Ni-Cr-Mo-Ti dental cast superalloys. Journal of Metallurgy and Materials Science, 53 (3). pp. 217-224.

Pillai, K C and Narayan, R (1978) Inhibition of corrosion of iron in acids by thiourea and derivatives. Journal of The Electrochemical Society (JES), 125 (9). pp. 1393-1397.

Pillai, KC and Narain, Raj (1977) Inhibition of corrosion of iron in acids by thiourea and derivatives. Journal of the electrochemical society (JES), 124 (3). C94-C94.

Poddar, D and Chakraborty, A and Kumar, B Ravi (2019) Annealing twin evolution in the grain-growth stagnant austenitic stainless steel microstructure. Materials Characterization, 155 .

Poddar, D and Ravi Kumar, B (2021) Effect of thermo-elasto-plastic strain on the mechanism of twin-free microstructure formation in the stainless steel. Materials Characterization, 171 . p. 110742.

Poddar, Palash (2018) Review of recent studies in magnesium matrix composites fabricated by stir casting. Journal of Metallurgy and Materials Science, 60(3) . pp. 125-137.

Poddar, Palash and Bagui, Sumanta and Ashok, K and Murugesan, A P (2017) Experimental investigation on microstructure and mechanical properties of gravity-die-cast magnesium alloys. Journal of Alloys and Compounds, 695 (IF-3.133). pp. 895-908.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys. Metallurgical and Materials Transactions A , 45A(4) (IF-1.730). pp. 2270-2283.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry sliding wear characteristics of rheocast Mg–Sn based alloys. Materials & Design, 54 (IF-3.171). pp. 820-830.

Poddar, Palash and Das, Arpan and Sahoo, K L (2012) Effect of rare earth elements on tribological behaviour of magnesium alloys. Tribology: Materials, Surfaces & Interfaces, 6(4) . pp. 147-154.

Poddar, Palash and Gupta, Savita and Sahoo, K L (2017) Magnesium-tin based composites processed through stir casting. Journal of Metallurgy and Materials Science, 59(4) . pp. 153-161.

Poddar, Palash and Kamaraj, A and Murugesan, A P and Bagui, Sumanta and Sahoo, K L (2017) Microstructural features of Mg-8%Sn alloy and its correlation with mechanical properties. Journal of Magnesium and Alloys, 5(3) . pp. 348-354.

Poddar, Palash and Mukherjee, Surojit and Sahoo, K L (2009) The Microstructure and Mechanical Properties of SiC Reinforced Magnesium Based Composites by Rheocasting Process. Journal of Materials Engineering and Performance, 18 (7). pp. 849-855.

Poddar, Palash and Murugesan, A P (2019) Calculation of internal back stress of different gravity-die cast Mg-alloys during creep deformation. Journal of Metallurgy and Materials Science, 61(2) . pp. 61-72.

Poddar, Palash and Sahoo, K L (2012) Microstructure and mechanical properties of conventional cast and rheocast Mg-Sn based alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 556 (IF-2.003). pp. 891-905.

Poddar, Palash and Sahoo, K L and Mukherjee, S and Ray, Ashok K (2012) Creep behaviour of Mg-8% Sn and Mg-8% Sn-3% Al-1% Si alloys. Materials Science and Engineering A, 545 . pp. 103-110.

Poddar, Palash and Srivastava, V C and De, P K and Sahoo, K L (2007) Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Materials Science and Engineering A, 460-461 . pp. 357-364.

Polimera, Srihith and Gali , A and Nath, Susanta Kumar and Rahaman, Ariful and Chandan, Mohammed Rehaan and Balakumaran, S J (2023) Thermo-mechanical property enhancement of rigid polyurethane foam using silica and alumina as hybrid fillers over single filler. Polymer Composites, 44(10) . pp. 6454-6466.

Poonawala, N S and Chakrabarti, A K and Prodhan, A (1999) Influence of minor additions of nitrogen and titanium on the carbide morphology and transformations in chromium cast irons. Transactions of the Indian Institute of Metals, 52 (4). pp. 245-250.

Prabhakar, S and Bhaskar Raju, G (1998) Amenability of column flotation for lead-zinc beneficiation - A case study. Metals Materials and Processes, 10 (2). pp. 109-118.

Prabhakar, S and Bhaskar Raju, G and Sankaran, C (1994) Quality improvement of copper concentrates by column flotation. Transactions of the indian institute of metals, 47 (2-3). pp. 89-101.

Prabhakar, S and Bhaskar Raju, G and Subba Rao, S (2006) Beneficiation of sillimanite by column flotation - a pilot scale study. International Journal of Mineral Processing, 81 (3). pp. 159-165.

Prabhakar, S and Bhaskar Raju, G and Subba Rao, S and Vijaya Kumar, T V (2004) Flotation and cyanidation of a semi refractory gold ore. European Journal of Mineral Processing & Environmental Protection, 4 (1). pp. 36-42.

Prabhakar, S and Goswami, M C and Mahapatra, A K S and Ghosh, K C and Das, S K and Sinha, A N and Mishra, K K (2000) Morphology and reduction kinetics of fluxed iron ore pellets. Ironmaking & Steelmaking, 27 (3). pp. 194-201.

Prabhakar, S and Goswami, M C and Mahapatra, A K S and Ghosh, K C and Das, Swapan K and Sinha, A N and Mishra, K K (2000) Morphology and reduction kinetics of fluxed iron ore pellets. Ironmaking & Steelmaking, 27 (3). pp. 194-201.

Prabhakar, S and Gupta, K N and Ray, H S and Sarangi, R and Bhole, A D and Sarkar, S B (1989) Studies on coal reactivity employing moving bed boat technique. Transactions of The Indian Institute of Metals, 42 (3). pp. 241-253.

Prabhakar, S and Hanumantha Rao, K and Forsling, Willis (2005) Dissolution of wollastonite and its flotation and surface interactions with tallow-1,3-diaminopropane (duomeen T). Minerals Engineering, 18 . pp. 691-700.

Prabhakar, S and Khangaonkar, P R (1985) Flotation and Adsorption Studies of Chalcopyrite with 8-Hydroxyquinoline. Transactions Indian Institute of Metals, 38 (5). pp. 383-387.

Prabhakar, S and Khangaonkar, P R (1982) Flotation and adsorption studies of chalcopyrite with cupferron. International Journal of Mineral Processing, 9 . pp. 87-95.

Prabhakar, S and Rao, K Hanumantha and Fodor, W (2005) Dissolution of wollastonite and its flotation and surface interactions with tallow-1,3-diaminopropane (duomeen T. Minerals Engineering, 18 (7). pp. 691-700.

Prabhakar, S and Ray, H S and Gupta, K N (1986) Bench-scale experiment to simulate vertical retort process for production of direct reduced iron. Ironmaking & steelmaking, 13 (2). pp. 76-79.

Prabhakaram, P (1965) Consideration of surface area and crystallinity of Kaolinite as factors in its base exchange capacity. NML Technical Journal, 7 (2). pp. 10-14.

Prabhakaram, P and Dey, A K and Rao, Addanki S and Khan, D K (1983) Performance evaluation of zinc rich primer based on soluble silicates. NML Technical Journal, 25 (1-2). pp. 11-19.

Prabhakaram, P and Mukherjee, A N and Guha, B K and Dey, A K (1981) Diffusion coating of saddle castings and spacers for boiler applications. Transactions of the Indian Institute of metals, 34 (6). pp. 501-506.

Prabhakaram, P and Murthy, H P S (1961) Production of dense carbon aggregates from carbonaceous materials for varied volatile contents for use in carbon products in general and soderberg paste in particular. NML Technical Journal, 3 (4). pp. 13-15.

Prabhakaram, P and Murthy, H P S (1960) Thermo-gravimetric studies on the low temperature pyrolysis of bituminous coal. NML Technical Journal, 2 (3). pp. 15-19.

Prabhu, N S and Joseyphus, J and Sankara Narayanan, T S N and Ravi Kumar, B and Mitra, A and Panda, A K (2012) Residual Stress Analysis in Surface Mechanical Attrition Treated (SMAT) Iron and Steel Component Materials by Magnetic Barkhausen Emission Technique. IEEE Transactions on Magnetics, 48(12) (IF-1.363). pp. 4713-4717.

Pradhan, A M (2013) Myth and Migration: A Revisit to Historiography of Kuidina'. journal Scheduled Castes & Scheduled Tribes Research and Training Institute (SCSTRTI), 53(1&2) . pp. 112-121.

Pradhan, A M (2004) Role of Dream in Kui-Culture. Orissa Review, Nov . pp. 29-30.

Pradhan, B and Kumar, Sanjay (2000) Finite element analysis of low-velocity impact damage in composite laminates. Journal of Reinforced Plastics and Composites, 19 (4). pp. 322-339.

Pradhan, Ratikanta and Karmakar, Anish and Ghosh, M and Chakrabarti, Debalay and Mukherjee, S (2019) Effect of thermomechanical processing on microstructural evolution in precipitation strengthened ferrite steel. SN Applied science .

Pradhan, S and Anuraag, N S and Shaw, S K and Gangwar, A and Rao, K S and Sharma, A and Mandal, B P and Prasad, N K (2023) MnNCN@C nanocomposite as an anode for Li-ion battery. Materials Science Engineering B-Advanced Functional Solid-State Materials, 298 .

Pradhan, S K and Bhuyan, P and Bairi, L R and Mandal, S (2021) Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel. Corrosion Science, 180 . p. 109187.

Pradhan, S K and Jena, P S M and Chaithanya, P V S and Singh, R (2024) Enhancement of Molten Salt Corrosion Resistance of Ni-Based Superalloy Through Adding Inhibitor. Transactions of The Indian Institute of Metals .

Pradhan, S K and Tripathy, S and Singh, Rajan and Murugaiyan, Premkumar and Roy, Debdas and Humane, M M and Chowdhury, S G (2022) On the grain boundary character evolution in non equiatomic high entropy alloy during hot rolling induced dynamic recrystallization. Journal of Alloys and Compounds, 922 .

Pradip, and Beena, R and Kumar, Rakesh and Srikanth, S (2016) Preface. Transactions of the indian institute of metals, 68(1) (IF-0.533). pp. 1-2.

Pradip, and Singh, Ratnakar and Das, K K and Sankar, T A P and Sunil Kumar, T S and Narsimhan, D and Rao, N K (1991) Studies to Improve the Flotation Recovery in the Benefi-ciation of a Complex mixed Sulphide-Oxide Ore from Malanjkhand, India. Proceeding of XVI International Mineral Processing Congress . pp. 1-7.

Prakash, Amit and Bar, H N and Sivaprasad, S and Tarafder, S and Dwivedi, J P (2017) The Effect of Residual Stress on Fatigue crack growth rate in AISI 304LN Stainless Steel. Materials Today: Proceedings, 4(2) . pp. 677-686.

Prakash, Amit and Lal, Radha Krishna and Choubey, Vikas Kumar and Dwivedi, J P and Singh, V P (2015) Study of Residual Stresses in I sectioned bars of Linear Work-Hardening Materials under Torsion. 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI 2015) . pp. 299-310.

Prakash, Hari (1987) Energy-dispersive x-ray-analysis of binary and quaternary systems. Indian journal of chemistry section a-inorganic bio-inorganic physical theoretical & analytical chemistry, 26 (5). pp. 440-444.

Prakash, Hari (1986) Mocvd alxga1-xas solar-cells. Progress in crystal growth and characterization of materials, 12 (1-4). pp. 257-264.

Prakash, Hari (1986) MOCVD AlxGa1−xAs solar cells. Progress in Crystal Growth and Characterization, 12 (1-4). pp. 257-264.

Prakash, R and Hembrom, K and Majumder, S K (2022) Interpretation of induction time and particle recovery in a microstructured counter-current flow column. Chemical Engineering and Processing-Process Intensification, 176 .

Prakash, R and Sangtam, B T and Hembrom, K and Majumder, S K (2022) Bubble size analysis in a two-phase countercurrent flow in the narrow rectangular column. Physics of Fluids, 34(4) .

Prakash, S (1994) Nonisothermal kinetics of iron-ore reduction. Ironmaking & Steelmaking, 21 (3). pp. 237-243.

Prakash, S (1994) On dynamic nonisothermal techniques for characterization of ironmaking raw-materials. Scandinavian journal of metallurgy, 23 (5-6). pp. 236-243.

Prakash, S (1996) Reduction and sintering of fluxed iron ore pellets - A comprehensive review. Journal of the south african institute of mining and metallurgy, 96 (1). pp. 3-16.

Prakash, S and Dhindaw, B K and Sengupta, S (1997) Smelting reduction of prereduced iron ore. Smelting reduction of prereduced iron ore, 24 (6). pp. 468-475.

Prakash, S and Goswami, M C and Mahapatra, A K S and Ghosh, K C (2000) Morphology and reduction kinetics of fluxed iron ore pellets. Ironmaking & Steelmaking, 27 (3). pp. 194-201.

Prakash, S and Mukherjee, K and Mehrotra, S P (2005) Cold model study of metal droplet descent through fluids including a treatment of the non-Newtonian behaviour as exhibited by molten stag system. Ironmaking & Steelmaking, 32 (6). pp. 494-502.

Prakash, S and Mukherjee, K and Singh, S and Mehrotra, S P (2007) Simulation of energy dynamics of electric furnace steelmaking using DRI. Ironmaking & Steelmaking, 34 (1). pp. 61-70.

Prakash, S and Ray, H S (1991) Moving-bed studies on reaction behavior of iron-ore and coal char mixtures in gasifying agents. Fuel, 70 (1). pp. 17-23.

Prakash, S and Ray, H S (1990) Prediction of reduction kinetics of iron-ore under fluctuating temperature conditions. ISIJ International, 30 (3). pp. 183-191.

Prakash, S and Ray, H S and Gupta, K K (1987) Use of the moving bed technique for the assessment of reducibility of iron ores and reactivity of solid reductants. Reactivity of Solids, 4 (3). pp. 215-226.

Prakash, S and Ray, H S and Gupta, K N (1992) Use of kinetic plots for relative assessment of reactor throughput and energy-consumption. Journal of Thermal Analysis, 38 (11). pp. 2467-2482.

Prakash, S and Ray, H S and Gupta , K N (1992) Use of kinetic plots for relative assessment of reactor throughput and energy-consumption. Journal of Thermal Analysis and Calorimetry, 38 (11). pp. 2467-2482.

Prakash, S and Shah, Liaquat Ali (2010) Impression on Collaboration between NML, India and CARIRI, Trinidad and Tobago. WAITRO News, DIT 4th Strategic Forum WAITRO . pp. 9-10.

Prakash, Ved (1971) Development of magnetic materials at the National Metallurgical Laboratory. NML Technical Journal, 13 (3). pp. 69-75.

Prakash, Ved and Pool, M J (1981) Effect of impurities (graphite) on the high-temperature creep-properties of NIAL. Journal of Materials Science, 16 (9). pp. 2495-2500.

Prakash, Ved and Rao, Venkatesh and Pramanik, S (1982) Structural and magnetic studies of pure and substituted gamma-iron oxide. Transactions of the Indian Institute of metals, 35 (5). 513-&.

Prakash, Ved and Tewari, C R (1984) Effect of manganese on the magnetic-properties of co-14-percent al-alloys. Transactions of the Indian Institute of metals, 37 (1). 89-&.

Prakash, Ved and Tewari, C R and Bandyopadhyay, D (1981) Kinked hysteresis loop in 36-percent Ni-Fe alloy. Indian journal of pure & applied physics, 19 (5). pp. 492-494.

Prakash, Ved and Tewari, C R and Nijhawan, B R (1965) Perminvar effects in some alnico magnets. NML Technical Journal, 7 (3). pp. 25-26.

Prakash Narayan, S (2001) Effect of hot workability parameters on the magnetic properties of nano-crystalline Nd-Fe-B magnets. Journal of Metallurgy and materials Science, 43 (2). pp. 135-140.

Prakrathi, S and Udupa K, Rajendra and Bhat K, Udaya (2013) Microstructural characterization and indentation creep behavior of friction stir modified Al surface with iron powder. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 131-140.

Pramanick, A K (2000) Effect of composition on the streaking and diffuse intensity in decagonal phase in Al70−XCo15CuXCY Ni15−Y system. Materials Science and Engineering, 294-296 . pp. 173-177.

Pramanick, A K (2009) Hybrid and nanomaterials - 2009. Current Science, 96 (11). pp. 1-2.

Pramanick, A K (2001) Nature of streaking and ordering in rapidly solidified Al–Co–Cu–Ni system. Materials Science and Engineering, 304-306 . pp. 818-821.

Pramanick, A K (2001) Special Diffraction Effects in Al7o_xCo15Cux+yNi15_y Decagonal Alloys. Ferroelectrics, 250 . pp. 273-279.

Pramanick, A K and Das, Goutam and Das, Swapan K and Ghosh, M (2017) Failure investigation of super heater tubes of coal fired power plant. Case Studies in Engineering Failure Analysis, 9 . pp. 17-26.

Pramanick, A K and Das, H and Reddy, G M and Ghosh, M and Nandy, S and Pal, T K (2018) Effect of Bainitic Microstructure on Ballistic Performance of Armour Steel Weld Metal Using Developed High Ni-Coated Electrode. Journal of Materials Engineering and Peformance .

Pramanick, A K and Gupta, Siddhi and Mishra, T and Sinha, Arvind (2012) Topographical heterogeneity in transparent PVA hydrogels studied by AFM. Materials Science and Engineering C, 32 (2). pp. 222-227.

Pramanick, A K and Mukhopadhyay, N K (2000) Aperiodic-2000. Current Science, 79 (12). pp. 1637-1643.

Pramanick, A K and Sinha, Arvind and Sastry, G V S and Ghosh, R N (2009) Near-grain-boundary characterization by atomic force microscopy. Ultramicroscopy, 109 (6). pp. 741-747.

Pramanick, Ajit Kumar and Das, H and Reddy, G M and Ghosh, M and Das, Goutam and Nandy, S and Pal, T K (2016) Development and design of microstructure based coated electrode for ballistic performance of shielded metal arc welded armour steel joints. Materials & Design, 103 (IF 4.364). pp. 52-62.

Pramanick , A K and Mandal, R K and Sastry, G V S (2004) Structural stability of Al-Co-Cu-Ni decagonal phase. Journal of Non-Crystalline Solids, 334-335 . pp. 234-237.

Pramanik, M R and Ganesh, R and Pandey, L P (1981) Rapid Indirect Volumetric Method for Determination of Molybdenum in Ferro-molybdenum. NML Technical Journal, 23 (1 & 2). pp. 20-21.

Pramanik, S and Rao, Venkatesh and Mohanty, O N (1993) Effect of niobium on the directional solidification and properties of alnico alloys. Journal of Materials Science, 28 (5). pp. 1237-1244.

Pramanik, Swati and Kumari, Aarti and Sinha, Manish K and Munshi, B and Sahu, S K (2023) Valorization of phosphor powder of waste fluorescent tubes with an emphasis on the recovery of terbium oxide (Tb4O7). Separation and Purification Technology, 322 .

Pramanik, Swati and Sahu, S K and Meshram, Pratima and Pandey, B D (2013) Arsenic removal from spent liquor generated during processing of vanadium sludge. Advanced Materials Research: Harnessing of Nonferrous Minirals, Metals and Wastes, 828 . pp. 55-63.

Prasad, A K and Pathak, D D and Pan, S K (2015) Characterisation of low grade iron ores of Bursua iron ore mines. Journal of Metallurgy and Materials Science, 57(1) . pp. 1-7.

Prasad, B K and Venkateswarlu, K and Das, S and Jha, A K and Dasgupta, R (1997) Influence of SiC reinforcement on the abrasive wear response of an Al-Cu alloy under conditions of varying abrasive size and applied load. Material Science letters, 16 . pp. 1113-1115.

Prasad, B K and Venkateswarlu, K and Modi, O P and Jha, A K and Das, S and Dasgupta, R and Yegneswaran, A H (1998) Sliding wear behavior of some Al-Si alloys: Role of shape and size of Si particles and test conditions. Metallurgical and Materials Transactions A, 29 (11). pp. 2747-2752.

Prasad, K and Kumari, K and Chandra, K P and Yadav, K L and Sen, S (2009) Dielectric relaxation and ac conductivity of WO3 added (Na1/2Bi1/2)TiO3 ceramic. Materials Science - Poland, 27 (2). pp. 373-384.

Prasad, K and Kumari, K and Lily, and Chandra, K P and Yadav, K L and Sen, S (2007) Glass-like response of (Na1/2Bi1/2)TiO3–WO3 ceramic. Solid State Communications, 144 (1-2). pp. 42-45.

Prasad, K and Lily, and Kumari, K and Chandra, K P and Yadav, K L and Sen, S (2007) Electrical properties of a lead-free perovskite ceramic: (Na0.5Sb0.5)TiO3. Applied Physics A: Materials Science & Processing, 88 (2). pp. 377-383.

Prasad, K and Lily, and Kumari, K and Chandra, P and Yadav, K L and Sen, S (2007) Electrical properties of a lead-free perovskite ceramic: (Na0.5Sb0.5)TiO3. Applied Physics A-Materials Science & Processing, 88 (2). pp. 377-383.

Prasad, K and Singh, Raghubir and Kumar, Rajendra (1988) Application of Cr-Mn-N-C austenitic steels for exhaust valve in automotive engines. Transactions of the Indian Institute of metals, 41(6) . pp. 585-591.

Prasad, M S (1972) Infrared study of the adsorption of mixed collectors on Galena and Anglesite. NML Technical Journal, 14 (1). pp. 24-33.

Prasad, P M and Mankhand, T R and Prasad, AJ K (1997) Molybdenum extraction process: An overview. NML Technical Journal, 39 (2). pp. 39-58.

Prasad, P M and Mankhand, T R and Rao, P S P and Prasad, A K J (2002) Kinetics of the direct synthesis of molycarbide by reduction-carburization of molybdenite in the presence of lime. Metallurgical and Materials Transactions B, 33 ( 3). pp. 345-354.

Prasad, R S and Lele, S (1994) Stabilization of the amorphous phase inside carbon nanotubes - solidification in a constrained geometry. Philosophical Magazine Letters Online ISSN 1362-3036, 70 (6). pp. 357-361.

Prasad, Sanjay (2002) Preparation of copper powder from the waste copper solution by the process of cementation. Journal of Metallurgy and materials Science, 44 (4). pp. 217-221.

Prasad, Sanjay (2013) Recycling of zinc dross to produce electrolytic zinc powder. Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 163-169.

Prasad, Sanjay (2004) Reduction studies on polymetallic sea nodules. Journal of Metallurgy and materials Science, 46 (3). pp. 157-164.

Prasad, Sanjay (2022) Zinc powder preparation from zinc dross. Materials Today: Proceedings, 67(SI: Part 2) . pp. 336-341.

Prasad, Sanjay and Kumar, Manoj (2020) Utilization of Roast-Reduced Ilmenite Leach Liquor for Ferrous Chloride Production by Hydrothermal Process. Transaction of the Indian Institute of Metals, Online (IF-1.205).

Prasad, Sanjay and Kumar, Manoj and Randhawa, N S (2021) Processing of Chromite Overburden by Soda Roasting to Recover Chromium as Sodium Chromate. Transactions of the Indian Institute of Metals, online .

Prasad, Sanjay and Maity, S K and Kumari, Aarti and Randhawa, N S and Shekher, M C (2019) Preparation of zinc powder from zinc dross. Journal of Metallurgy and Materials Science, 61(3) . pp. 119-123.

Prasad, Sanjay and Pandey, B D (1999) Alternative processes for treatment of chalcopyrite - a review. Minerals Engineering, 12 (2). p. 235.

Prasad, Sanjay and Pandey, B D (1998) Alternative processes for treatment of chalcopyrite —A review. Minerals Engineering, 11 (8). pp. 763-781.

Prasad, Sanjay and Pandey, B D (1997) The progress of reactions in roasting of chalcopyrite by thermoanalytical studies. NML Technical Journal, 39 (4). pp. 229-238.

Prasad, Sanjay and Pandey, B D (1999) Sulphation roasting studies on synthetic copper–iron sulphides with steam and oxygen. Canadian Metallurgical Quarterly, 38 (4). pp. 237-247.

Prasad, Sanjay and Pandey, B D (1999) Thermoanalytical Studies on Copper—Iron Sulphides. Journal of Thermal Analysis and Calorimetry, 58 (3). pp. 625-637.

Prasad, Sanjay and Pandey, B D and Palit, S K (1994) Direct sulfation of chalcopyrite with steam and oxygen. Transactions of the institution of mining and metallurgy section c-mineral processing and extractive metallurgy, 103 ( ). C69-C75.

Prasad, Sanjay and Pandey, B D and Palit, S K (1996) Kinetics of sulfation of chalcopyrite with steam and oxygen in the presence of ferric oxide. Metallurgical and Materials Transactions B-Process metallurgy and materials processing science, 27 (3). pp. 465-474.

Prasad, Sanjay and Pandey, B D and Palit, S K (1996) Sulphation of chalcopyrite with steam and oxygen in the presence of some additives. Materials Transactions JIM, 37 (6). pp. 1304-1310.

Prasad, Sidheshwar and Chatterjea, A B (1969) Heat balance for iron making in experimental low-shaft furnace. NML Technical Journal, 11 (4). pp. 68-82.

Prasad, Sidheshwar and Chatterjea, A B (1973) Reactivity of some low temperature carbonized cokes made from non-coking coals. NML Technical Journal, 15 (2). pp. 29-35.

Prasad, T V (1965) Studies on mechanical properties of refractories at high temperatures. NML Technical Journal, 7 (3). p. 27.

Prasad, V V S and Rao, A S and Prakash, U and Rao, V R and Gupt, K M (2002) Recycling of valuable scrap through electroslag processing. Transactions of the Indian Institute of Metals, 55 (1-2). pp. 9-14.

Prasad, V V S and Rao, A S and Prakash, U and Rao, V R and Rao, P K and Gupt, K M (1998) Alumina addition to fluoride slags for recycling of low oxygen high conductivity copper scrap through electroslag crucible melting. ISIJ International, 38 (12). pp. 1387-1389.

Prasad, V V S and Rao, A S and Prakash, U and Rao, Venkatesh and Rao, P K and Gupt, K M (1998) Effect of process variables on electroslag crucible melting of copper-chromium alloys. ISIJ International, 38 (12). pp. 1390-1392.

Prasad , Sanjay (2011) Extraction of chromium as Sodium Chromate from Stainless Steel Dust. The Journal of Solid Waste Technology and Management, 37 (1). pp. 40-46.

Prasada Rao, P D and Satyanarayana, C and Vijayaraghavan, K and Mathur, G P (1972) Beneficiation studies with a pyrite-pyrrhotite sample from Saladipura, Rajasthan. NML Technical Journal, 14 (2). pp. 56-59.

Prashanth, K G and Shahabi, H S and Attar, H and Srivastava, V C and Eckert, J and Scudino, S and Uhlenwinkel, V and Ellendt, N (2015) Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting. Additive Manufacturing, 6 . pp. 1-5.

Pratihar, B and Jana, Animesh and Biswas, S and De, Srishendu (2023) Pd nanoparticles-decorated borophene nanosheets for intrinsic polarization-induced visible light photocatalysis. Catalysis Science & Technology, 13(5) . pp. 1558-1570.

Premchand, (1996) Processing of low grade tungsten ore concentrates by hydrometallurgical route with particular reference to India. Bulletin of Materials Science, 19 (2). pp. 295-312.

Premchand, and Kumar, Vinay and Pandey, B D (1995) Extraction of tungsten from low grade Wolframite Jig concentrate. Metals Materials & Processes, 7 (3). pp. 159-168.

Premkumar, P and Kannan, K and Venkatakrishnan, P G (2010) Menthol as volatile corrosion inhibitor for mild steel in HCl environment. Journal of Metallurgy and Materials Science, 52 (4). pp. 371-377.

Prithiv, T S and Thirumurugan, G and Madan, M and Kamaraj, A (2020) Thermodynamic Assessment of Steelmaking Practices for the Production of Re-sulfur Steels. Transactions of the Indian Institute of Metals, 73(6) (IF-1.205). pp. 1595-1603.

Priya, Jayati and Randhawa, N S and Hait, Jhumki and Bordoloi, N and Patel, J N (2020) High purity copper recycled from smelter dust by sulfation roasting, water leaching and electrorefining. Environmental Chemistry Letters (IF-5.922). pp. 1-7.

Prodhan, A (2009) Effect of Electric Current (Plasma) Treatment on LM-6 Al-Si Alloy. Transactions Of The American Foundry Society, 117 . pp. 63-77.

Prodhan, A (2011) Semisolid processing of short and long freezing range Cu alloys by electric current. Materials Science and Technology . pp. 1513-1517.

Prodhan, A and Reddy, S R S and Prasad, S N (2000) Studies on solidification, aging and forgeability of modified stainless steels. Journal of Materials Processing Technology, 103 (2). pp. 324-331.

Prodhan, A and Sanyal, D (1998) Cooling curves analysis of aluminium solidified without and with magnetic or electric field. Journal of Materials Science Letters, 16 (11). pp. 958-961.

Prodhan, A and Sivaramakrishnan, C S and Chakrabarti, A K (2001) Solidification of aluminum in electric field. Metallurgical and Materials Transactions B, 32 (2). pp. 372-378.

Purohit, Bijoy Kumar and Pramanik, Swati and Meshram, Pratima and Sahu, S K and Pandey, B D (2013) Chemical beneficiation of hingula coal. 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 89-93.

Purohit, Bijoy Kumar and Pramanik, Swati and Meshram, Pratima and Sahu, S K and Pandey, B D (2014) Chemical beneficiation of Hingula coal. Journal of Metallurgy and Materials Science, 56(3) . pp. 173-177.

Puvvada, G V K (1999) Liquid-liquid extraction of gallium from Bayer process liquor using Kelex 100 in the presence of surfactants. Hydrometallurgy , 52 (1). pp. 9-19.

Puvvada, G V K (1999) Liquid–liquid extraction of gallium from Bayer process liquor using Kelex 100 in the presence of surfactants. Hydrometallurgy, 52 (1). pp. 9-19.

Puvvada, G V K and Chandrasekhar, K (1997) Studies on the metal binding properties of the seeds of Strychos potatorum linn. NML Technical Journal, 39 (4). pp. 239-243.

Puvvada, G V K and Chandrasekhar, K and Ramachandrarao, P (1996) Solvent extraction of gallium from an Indian Bayer process liquor using Kelex-100. Minerals Engineering, 9 (10). pp. 213-1058.

Puvvada, G V K and Murthy, D S R (2000) Selective precious metals leaching from a chalcopyrite concentrate using chloride/hypochlorite media. Hydrometallurgy, 58 (3). pp. 185-191.

Puvvada, G V K and Srikanth, S (1999) Recycling of tungsten based heavy alloy scrap. NML Technical Journal, 40 (1). pp. 21-29.

Puvvada, G V K and Yedavalli, B V S and Rao, A S (1998) Solvent extraction of gallium from Bayer Process liquor (Indal, Muri) using 7-alkyl-substituted-8-hydroxyquinoline (Kelex-100). Transactions of the Indian Institute of Metals, 51 (4). pp. 223-225.

Quraishi, M A and Jamal , D (2005) Inhibition of metals corrosion by a new vapour phase corrosion inhibitor. Journal of Metallurgy and Materials Science, 47 (1). pp. 45-50.

Radha Krishna, Lal and Prakash, Amit and Choubey, Vikas Kumar and Dwivedi, J P and Singh, V P (2017) Spring back analysis of I Sectioned bar of Linear Work-Hardening Materials under Torsional Loading. Materials Today: Proceedings, 4(2) . pp. 2373-2383.

Radiguet, B and Blavette, D and Wanderka, N and Banhart, J and Sahoo, K L (2008) Segregation-controlled nanocrystallization in an Al–Ni–La metallic glass. Applied Physics Letters, 92 . 103126-1-103126-3.

Raghavan, S and Singh, Gaurav and Sondhi, Sanjay and Srikanth, S (2012) Construction of a pseudo-binaryphasediagram for multi-componentNi-base superalloys. Calphad, 38 . pp. 85-91.

Rahman, M M and Tikoo, P K (1989) Effect of basis metals and different solvents on deposition of nickel. NML Technical Journal, 31 (1-4). pp. 18-23.

Rai, R K and Jena, P S M and Paulose, N and Sahu, J K (2022) Effect of carbide precipitation on Coffin-Manson relationship of a polycrystalline nickel-based superalloy. Fatigue & Fracture of Engineering Materials and Structures .

Rai, R K and Paulose, N and Sahu, J K (2024) The effects of microstructure and temperature on the deformation heterogeneities and fatigue behavior of a Ni-based superalloy. Philosophical Magazine .

Rai, R K and Sahu, J K (2019) Mean-stress and oxidation effects on fatigue behaviour of CM 247 DS LC alloy. Materials Science and Technology, 35(10) . pp. 1220-1226.

Rai, R K and Sahu, J K (2018) Mechanism of serrated flow in a cast nickel base superalloy. Materials Letters, 210 (IF-2.572). pp. 298-300.

Rai, R K and Sahu, J K (2018) Strength ductility paradox in a directionally solidified nickel base superalloy. Materials Letters, 220 (IF-2.572 ). pp. 90-93.

Rai, R K and Sahu, J K (2018) Substructural evolution in a directionally solidified nickel-base superalloy during relaxation fatigue tests at 850 degrees C. Materials Letters, 230 (IF-3.019). pp. 241-244.

Rai, R K and Sahu, J K and Das, S K and Paulose, N and Fernando, C (2020) Creep-fatigue deformation micromechanisms of a directionally solidified nickel-base superalloy at 850 degrees C. Fatigue & fracture of engineering materials & structures, 43(1) (IF- 2.555). pp. 51-62.

Rai, R K and Sahu, J K and Das, S K and Paulose, N and Fernando, D.C and Srivastava, C (2018) Cyclic plastic deformation behaviour of a directionally solidified nickel base superalloy at 850 degrees C: Damage micromechanisms. Materials Characterization, 141 (IF-3.220). pp. 120-128.

Rai, R K and Sahu, J K and Jena, P S M and Das, S K and Paulose, N and Fernando, D.C (2018) Micromechanism of High-Temperature Tensile Deformation Behavior of a Directionally Solidified Nickel Base Superalloy. Journal of Materials Engineering and Performance, 27(2) (IF-1.331). pp. 659-665.

Rai, R K and Sahu, J K and Jena, P S M and Das, Swapan K and Paulose, N and Fernando, C D (2017) High temperature tensile deformation of a directionally solidified nickel base superalloy: Role of micro constituents. Materials Science and Engineering A, 705 (IF-3.094). pp. 189-195.

Rai, R K and Sahu, J K and Paulose, N and Fernando, C (2020) Low Cycle Fatigue Behavior of a Directionally Solidified Nickel-Based Superalloy: Mechanistic and Microstructural Aspect. Metallurgical and Materials Transactions A - Physical metallurgy and materials science, 51(6) (IF-2.050). pp. 2752-2765.

Rai, R K and Sahu, J K and Paulose, N and Fernando, D.C (2021) Tensile deformation micro-mechanisms of a polycrystalline nickel base superalloy: From jerky flow to softening. Materials Science and Engineering A, 807 .

Rai, R K and Sahu, J K and Pramanick, A K and Paulose, N and Fernando, D.C and Das, S K (2019) Creep deformation micro-mechanisms of CM 247 DS LC Ni-base superalloy under relevant service condition. Materials Characterization, 150 . pp. 155-165.

Rai, R S and Singh, S R and Dubey, M (1986) Lattice imaging studies on structure and disorder in sic polytypes .1. Bulletin de mineralogie, 109 (5). pp. 509-527.

Raj, A and Goswami, B and Kumar, S B and Krishna, G and Roy, Nilima and Ray, Ashok K (2014) Damage Analysis of Service Exposed Reformer Tubes in Petrochemical Industries. High Temperature Materials and Processes, 33(3) (IF-0.356). pp. 201-216.

Raj, A and Goswami, B and Kumar, S B and Krishna, G and Roy, Nilima and Ray, Ashok K (2014) Performance and Life Assessment of Reformer Tubes in Petrochemical Industries. High Temperature Materials and Processes, 33(3) (IF-0.356). pp. 217-230.

Raj, A and Goswami, B and Ray, Ajoy K (2012) High speed steels - A tribute of microalloyed steels. Journal of Metallurgy and Materials Science,, 54(4) . pp. 225-248.

Raj, A and Goswami, B and Ray, Ashok K (2014) Creep and Fatigue Behavior in Micro-alloyed Steels - A Review. High Temperature Materials and Processes, 33(1) (IF-0.356). pp. 1-12.

Raj, A and Goswami, B and Ray, Ashok K (2012) Forge and heat-treatments in micro-alloyed steels. Journal of Metallurgy and Materials Science, 54(4) . pp. 249-268.

Raj, A and Goswami, B and Ray, Ashok K (2012) Perspectives of creep and fatigue behavior in microalloyed steels. Journal of Metallurgy and Materials Science, 54(2) . pp. 93-110.

Raj, A and Goswami, B and Ray, Ashok K (2012) Precipitation, recrystallization and elemental propositions in micro-alloyed steels. Journal of Metallurgy and Materials Science, 54(3) . pp. 155-173.

Raj, Baldev and Bhattacharya, D K and Jayakumar, T (1995) Magnetic hysteresis loop parameters and Barkhausen noise for microstructural characterization of steels. Metals Materials and Processes, 7 (1). pp. 19-28.

Raj, R and Kumari, Aarti and Sahu, D K and Prasad, R and Ranganathan, S (2019) Carbothermic Reduction of Iron Oxide Waste Generated During the Processing of Ilmenite. Transactions of the Indian Institute of Metals , 72(1) . pp. 11-16.

Raj, V and Ali, M Mubarak (2008) Nickel coated aluminium electrode - A sensor for the voltammetric analysis of crystal violet. Journal of Metallurgy and Materials Science, 50 (4). pp. 183-193.

Rajagopal, G and Periasamy, V M (2008) Chemical vapor deposition of copper using argon as carrier gas. Journal of Metallurgy and Materials Science, 50 (3). pp. 175-181.

Rajeev, and Srivastava, S C and Ghosh, M K (1980) X-ray fluorescence analysis of copper-lead-zinc ores. NML Technical Journal, 22 (3-4). pp. 35-40.

Rajeswari, S and Jayakumar, T and Rao, C B and Bhattacharya, D K and Raj, B (1998) Residual stress measurement in ferritic steel tube welds using X-ray diffraction. Science and technology of welding and joining, 3 (4). pp. 204-207.

Raji, K (2014) Influence of density on Al-Cu composition during compaction process. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 53-57.

Raji, K and Alfred Cecil Raj, S (2012) Study of safe factor of sintered aluminium alloys using extrusion process. Journal of Metallurgy and Materials Science, 54(2) . pp. 137-142.

Raji, K and Cecil Raj, S Alfred (2010) Sintered properties of aluminium alloy for better nano tool products. Journal of Metallurgy and Materials Science, 52 (2). pp. 169-172.

Raji, K and Raj, S Alfred Cecil (2010) Plasticity of tensile specimen of 7% copper in aluminium composite. Journal of Metallurgy and Materials Science, 52 (4). pp. 379-383.

Raji, K and Raj, S Alfred Cecil (2011) Micro to nano size distribution of powder particles of Al -Cu and its influence on strength properties. Journal of Metallurgy and Materials Science, 53 (4). pp. 369-374.

Raji, M A and Baba, A A and Abhilash, (2023) Uranium extraction from sulphuric acid leach liquor by Cyanex®272 as intermediate in nuclear fuel cell. Journal of Radioanalytical and Nuclear Chemistry, 332(11) . pp. 4471-4476.

Rajini Kanth, B and Ramarao, N V and Panda, A K and Gopalan, R and Mitra, A and Mukhopadhyay, P K (2010) Effect of annealing on the martensitic transformation of a CoNiAl ferromagnetic shape memory alloy. Journal of Alloys and Compounds, 491 (1-2). pp. 22-25.

Rajinikanth, V and Kumar, Tipu and Mahato, B and Ghosh Chowdhury, S and Sangal, S (2019) Effect of Strain-Induced Precipitation on the Austenite Non-recrystallization (T-nr) Behavior of a High Niobium Microalloyed Steel. Metallurgical and Materials Transactions A, 50(12) . pp. 5816-5838.

Rajkamal, A and Sharma, A and Pullagura, B K and Thapa, R and Kim, H (2024) Engineering lithium nickel cobalt manganese oxides cathodes: A computational and experimental approach to bridging gaps. Chemical Engineering Journal, 481 .

Rajnikanth, V and Arora, Gaurav and Narasaiah, N and Venkateswarlu, K (2008) Effect of repetitive corrugation and straightening on Al and Al–0.25Sc alloy. Materials Letters, 62 (2). pp. 301-304.

Rajnikanth, V and Jindal, Vikas and Akkimardi, V G and Ghosh, M and Venkateswarlu, K (2007) Transmission electron microscopy studies on the effect of strain on Al and Al–1% Sc alloy. Scripta Materialia, 57 (5). pp. 425-428.

Rajnikanth, V and Mukherjee, K and Ghosh Chowdhury, S and Schiebahn, A and Harms, A and Belck, W (2013) Mechanical property and microstructure of resistance spot welded twinning induced plasticity-dual phase steels joint. Science and Technology of Welding and Joining, 18/6 (IF-1.274). pp. 485-491.

Rajnikanth, V and Munda, Parikshit and Kumar, Tipu and Ghosh Chowdhury, S and Sangal, Sandeep (2016) Effect of thermomechanical processing schedule on the texture and microstructure of pipeline grade API X80 microalloyed steel. 4 th International conference on Thermomechanical Simulation and Processing of Steels, SIMPRO 2016, 4 (NON-SCI). pp. 231-239.

Rajnikanth, V and Munda, Parikshit and Minj, R K and Ghosh Chowdhury, S (2012) In Quest of self Reliance: NML’s steel development program. Science and Culture, Vol.78/No.11-12 . pp. 532-536.

Rajnikanth, V and Soni, K and Mahato, B and Rao, M Ananda (2019) Study of microstructural degradation of a failed pinion gear at a cement plant. Engineering failure Analysis, 95 . pp. 117-126.

Rajnikanth, V and Soni, M K and Mahato, B and Rao, M Ananda (2021) Microstructural investigation of rolling contact fatigue (RCF) on a failed planetary gear of a windmill gearbox. Engineering Failure Analysis, 121 .

Rajnikanth, V and Venkateswarlu, K (2011) An investigation of sliding wear behaviour of WC–Co coating. Tribology International, 44 (12). pp. 1711-1719.

Rajnikanth, V and Venkateswarlu, K and Sen, Mani Kuntal and Das, Mousumi and Alhajeri, S N and Langdon, T G (2011) Influence of scandium on an Al–2% Si alloy processed by high-pressure torsion. Materials Science and Engineering A, 528 (3). pp. 1702-1706.

Rajpurohit, R S and Jena, P S M and Kumar, Shivam and Sahu, J K (2021) Asymmetric cyclic loading behavior of micro-alloyed 2.25 Cr–Mo steel at room temperature. International Journal of Pressure Vessels and Piping, 191 (IF-2.230). p. 104369.

Rajpurohit, R S and Jena, P S M and Mahato, B and Sahu, J K (2020) Strain partitioning between matrix and precipitates during fatigue deformation of 2.25Cr-Mo steel. Material Science and Technology (IF-1.835).

Rajpurohit, R S and Mishra, P and Srinivas , N C S and Singh, S R and Singh, V (2020) Ratcheting Fatigue Behaviour of Zircaloy-2 at 300 degrees C. Metals and Materials International (IF-1.990).

Rajput, U P and Zala ., D M and Darji , S B and Rao , V J and Vaish, Ashok Kumar (2019) Recent advancements in hydrophobic materials and their significant applications in corrosion prevention. Journal of Metallurgy and Materials Science, 61(3) . pp. 125-133.

Rajshekar, Y and Pal, J and Venugopalan, T (2018) Development of hematite ore pellet utilizing mill scale and iron ore slime combination as additive. Journal of Mining and Metallurgy Section B: Metallurgy, 54(2) . pp. 197-208.

Rajshekhar, Y and Alex, T C and Sahoo, D P and Babu, G A and Balakrishnan, V and Venugopalan, T and Kumar, Sanjay (2016) Iron ore slime as an alternate coolant in steelmaking: Performance evaluation at commercial scale. Journal Of Cleaner Production, 139 (IF- 5.715). pp. 886-893.

Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Mill scale as a potential additive to improve the quality of hematite ore pellet. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.5). pp. 202-210.

Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking & Steelmaking, 45(4) (IF-1.205). pp. 325-334.

Raju, G B and Ratchambhigai, S and Rao, M A and Vasumathi, N and Kumar, TVV and Prabhakar, S and Rao, S Subba (2016) Beneficiation of Barite Dumps by Flotation Column; Lab-Scale Studies to Commercial Production. Transactions of the Indian Institute of Metals, 69(1) (IF-0.533). pp. 75-81.

Ram, S (1994) Kinetics of the desorption of interstitial hydrogen in stable Nd2Fe14BHx, x-less-than-or-equal-to-5. Physical Review B (PRB), 49 (14). pp. 9632-9638.

Ram, S and Banerjee, H D and Halder, S and Ramachandrarao, P (1997) Formation of Nd2Fe14B hydride by milling of anhydride particles in toluene in a closed reactor. Bulletin of Materials Science, 20 (8). pp. 1049-1058.

Ram, S and Claude, E and Joubert, J C (1995) Synthesis, stability against air and moisture corrosion, and magnetic-properties of finely divided loose Nd2Fe14BHx, x-less-than-or-equal-to-5, hydride powders. IEEE Transactions on Magnetics, 31 (3). pp. 2200-2208.

Ram, S and Fecht, H J and Halder, S and Ramachandrarao, P and Banerjee, H D (1997) Calorimetric study of the desorption of the interstitial hydrogen atoms in ferromagnetic Nd2Fe14BHx (x<=5) microcrystals. Physical Review B (PRB), 56 (2). pp. 726-737.

Ram, S and Halder, S (1996) Medium-range structural ordering and macroscopic interactions in 1 to 2 mm thin two-dimensional platelets of borate glasses. Physica status solidi b-basic research, 195 (2). pp. 343-351.

Ram, S and Singh, T B and Pathak, L C (1998) Synthesis and thermogravimetric analysis of amorphous boehmite fibres. Physica Status Solidi A-applied research, 165 (1). pp. 151-164.

Ram, S and Singh, T B and Srikanth, S (1998) Thermal desorption process of water in amorphous AlO(OH)·αH2O fibres prepared by an electrochemical method. Materials Transactions, JIM, 39 (4). 485-491 .

Ramachandran, E G and Balasundaram, L J (1959) The nature and structure of the Sigma Phase in Transition Alloys. NML Technical Journal, 1 (2). pp. 28-31.

Ramachandran, E G and Dasarathy, C (1960) Hydrogen and austenite stabilization. Acta Metallurgica, 8 (10). pp. 729-730.

Ramachandran, E G and Dasarathy, C (1960) Stability of retained austenite on ageing. Acta Metallurgica, 8 (4). pp. 274-275.

Ramachandran, E G and Dasarathy, C (1960) Stabilization of austenite by hydrogen. Nature, 187 (4738). pp. 684-685.

Ramachandran, E G and Dasarathy, C (1960) A thermal stabilization of austenite. Acta Metallurgica, 8 (9). pp. 666-667.

Ramachandran, E G and Dasarathy, C (1961) Transformation of cathodically impregnated and cooled austenite. Nature, 191 (4738). pp. 998-1000.

Ramachandrarao, P (1997) Evolution of microstructure in rapidly solidified alloys. Metals Materials and Processes, 9 (3). pp. 221-228.

Ramachandrarao, P (2001) Iron & Steel heritage of India: Contributions from the National Metallurgical Laboratory. Metallurgy in India: A Retrospective . pp. 182-193.

Ramachandrarao, P (2001) National Metallurgical Laboratory: Fifty Golden Years. Metallurgy in India: A Retrospective, NML Golden Jubilee Commemorative Volume ( ). pp. 526-535.

Ramachandrarao, P (1992) Rapid solidification of steels. Bulletin of materials science, 15 (6). pp. 503-513.

Ramachandrarao, P (1993) Report on the discussion meeting on icosahedral symmetry in materials. Current Science, 64 (10). pp. 708-709.

Ramachandrarao, P (2000) Solidification of silver–germanium alloys under microgravity conditions. Current Science, 79 (3). pp. 326-327.

Ramachandrarao, P (1997) Studies on undercooled metallic melts. Progress in Materials Science, 42 (1-4). pp. 301-309.

Ramachandrarao, P and Dubey, K S (1995) A thermodynamic approach to the viscous behavior of glass-forming liquids. Materials Science and Engineering B-Solid State Materials for Advanced Technology , 32 (3). pp. 285-293.

Ramachandrarao, P and Dubey, K S (1995) A thermodynamic approach to the viscous behaviour of glass-forming liquids. Materials Science and Engineering B, 32 (3). pp. 285-293.

Ramachandrarao, P and Sinha, Arvind and Rao, Venkatesh (1997) Perspectives in rare earth magnets. Metals materials and processes, 9 (1). pp. 65-73.

Ramachandrarao, P and Sinha, Arvind and Sanyal, D (2000) On the fractal nature of Penrose tiling. Current Science, 79 (3). pp. 365-366.

Ramachandrarao, P and Srikanth, S (1998) Can there be a second kind of entropy catastrophe in the melting of metastable solids? Journal of Materials Research, 13 (11). pp. 3270-3274.

Ramachandrarao, P and Srikanth, S (1995) Enthalpy of peritectic transformations from phase-diagram data. Scripta Metallurgica, 32 (2). pp. 161-166.

Ramachandrarao, P and Srikanth, S (1995) Estimation of the enthalpy of peritectic transformations from phase diagram data. Scripta Metallurgica et Materialia, 32 (2). pp. 161-166.

Ramakrishna Rao, M (1967) Compatibility relationship in the quaternary sub-system CaAl2O4 CaAl4O7-Ca2Al2SiO7-MgAl2O4. NML Technical Journal, 9 (1). pp. 4-8.

Raman, P V and Banerjee, S K and Narayanan, P I A (1970) Beneficiation of graphite with particular reference to samples from Andhra Pradesh. NML Technical Journal, 12 (1). pp. 5-8.

Raman, P V and Narayanan, P I A (1960) Fluorspar and its beneficiation. NML Technical Journal, 2 (2). pp. 18-22.

Ramana Rao, K V (1997) Fourier transform infrared spectroscopic studies on bauxites and their phase analysis. NML Technical Journal, 39 (4). pp. 195-202.

Ramanathan, K and Periasamy, V M and Malathy, and Pushpavanamb, and Natarajan, U (2008) Prediction of volume fraction of diamond deposition in Ni-diamond composite coatings - An artificial neural network approach. Journal of Metallurgy and Materials Science, 50 (1). pp. 57-64.

Rambabu, Ch. and Majumdar, K K (1972) Phosphorite deposits in India and their beneficiation. NML Technical Journal, 14 (2). pp. 82-88.

Rambabu, Ch. and Narasimham, J B and Rao, G V U and Majumdar, K K (1972) Recovery of economic minerals from the Carbonatite-Sevattur (Tamil Nadu). NML Technical Journal, 14 (2). pp. 76-81.

Rana, A K and Paul, S K and Dey, P P (2018) Effect of Martensite Volume Fraction on Strain Partitioning Behavior of Dual Phase Steel. Physical Mesomechanics , 21(4) (IF-1.551). pp. 333-340.

Rana, A K and Paul, S K and Dey, P P (2019) Stress field in an isotropic elastic solid containing a circular hard or soft inclusion under uniaxial tensile stress. Materials Today:Proceeding, 11(Part-2) . pp. 657-666.

Randhawa, N S and Das, N N and Jana, R K (2013) Adsorptive remediation of Cu(II) and Cd(II) contaminated water using manganese nodule leaching residue. Desalination and Water Treatment, Online (IF-0.825). pp. 1-15.

Randhawa, N S and Das, N N and Jana, R K (2013) Cadmium removal using waste residue generated after recovery of base metals from manganese nodules. Indian Journal of Chemical Technology (0.61). pp. 371-379.

Randhawa, N S and Das, N N and Jana, R K (2012) Selenite adsorption using leached residues generated by reduction roasting–ammonia leaching of manganese nodules. Journal of Hazardous Materials, 241-242 (4.173). pp. 486-492.

Randhawa, N S and Dwivedi, D and Prajapati, S and Jana, R K (2013) Application of manganese nodules leaching residue for adsorption of nickel(II) ions from aqueous solution. International Journal of Environmental Science and Technology, Online (IF-1.80). pp. 1-7.

Randhawa, N S and Dwivedi, D and Prajapati, S and Jana, R K (2015) Application of manganese nodules leaching residue for adsorption of nickel(II) ions from aqueous solution. International Journal of Environmental Science and Technology, 12(3) (IF-1.794). pp. 857-864.

Randhawa, N S and Dwivedi, Deepak and Prajapati, Sonu and Jana, R K (2013) Utilisation of sea nodules leaching residue for adsorption of Ni(II) ions. Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 186-196.

Randhawa, N S and Gharami, Kalpataru and Kumar, Manoj (2016) Leaching kinetics of spent nickel-cadmium battery in sulphuric acid. Hydrometallurgy, 165 (IF- 2.605). pp. 191-198.

Randhawa, N S and Hait, Jhumki and Jana, R K (2016) A brief overview on manganese nodules processing signifying the detail in the Indian context highlighting the international scenario. Hydrometallurgy, 165 (IF- 2.605). pp. 166-181.

Randhawa, N S and Jana, R K (2014) Efficient removal of aqueous lead by leached sea nodules residue. Desalination and Water Treatment (IF-0.987). pp. 1-11.

Randhawa, N S and Jana, R K and Das, N N (2012) Manganese Nodules Residue: Potential Raw Material for FeSiMn Production. International Journal of Metallurgical Engineering, 1(2) . pp. 22-27.

Randhawa, N S and Jana, R K and Das, N N (2012) Silicomanganese production utilising low grade manganese nodules leaching residue. Mineral Processing and Extractive Metallurgy (Trans. IMM C) (0.667). pp. 1-9.

Randhawa, N S and Jana, R K and Das, N N (2012) Thermodynamics and Viscosity Aspects in Manganese Nodule Residue Smelting for Silicomanganese Production. International journal of Metallurgical Engineering, 1(5) . pp. 88-95.

Randhawa, N S and Katiyar, P K (2020) Potentiodynamic Polarization Behavior and Microscopic Examination of Tungsten Carbide Hard Metal Materials in Supported Ammoniacal Medium. Portugaliae Electrochimica Acta, 38(3) . pp. 185-200.

Randhawa, N S and Kumar, Manoj and Kumar, Hemant and Prasad, Sanjay (2016) Enhancing titania value of a weathered ilmenite by reduction roasting - acid leaching. National coference on non-ferrous minerals & materials- 2016 . pp. 30-34.

Randhawa, N S and Minj, R K (2020) An improved process for the production of low carbon ferromanganese. Transaction of Indian Institute of Metals (IF-1.205). pp. 1-7.

Randhawa, N S and Mishra, D and Jana, R K (2011) Smelting of leached sea nodule residue blended with manganese ore for revovery of manganese. The Banaras Metallurgist, 16 . pp. 117-121.

Randhawa, N S and Murmu, Nisha and Tudu, Shakuntala and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. Environmental Chemistry Letters, 12(4) (IF-1.906). pp. 517-522.

Randhawa, N S and Prasad, Sanjay (2019) Direct Carbothermic Reduction of Weathered Ilmenite for Efficient Removal of Iron by Leaching. Metallurgical and Materials Transactions B, 50(3) . pp. 1277-1289.

Randhawa, N S and Prasad, Sanjay and Kumar, Manoj (2017) Role of flux on the upgradation of llmenite by reduction roasting process. Indian Institute of mineral Engineers .

Randhawa, N S and Sau, D C and Kumar, Manoj (2016) Direct electrolytic refining of end-of-life industrial copper waste scraps for production of high purity copper powder. Russian journal of non-ferrous metals, 57(4) (IF-0.204). pp. 367-373.

Rangachari, P S and Krishnamachar, V S and Gupta, R C and Sant, B R and Korin, S C and Jain, S K and Saxena, M N and Singh, Narinder and Srinivasan, S R and Shahani, M J and Altekar, V A and Thakur, D N and Singh, R V (1973) Role of microorganisms in winning metals from low-grade ores. NML Technical Journal, 15 (4). pp. 16-24.

Ranganath, V R and Das, Goutam and Tarafder, S and Das, Swapan K (2004) Failure of a swing pinion shaft of a dragline. Engineering Failure Analysis, 11 (1). pp. 599-604.

Ranganath, V R and Pandey, R K and Kumar, A N (1990) A comparative study of various approaches for CTOD toughness evaluation. Engineering Fracture Mechanics, 37 (5). pp. 1059-1069.

Ranganath, V R and Tarafder, S (1995) Application of fracture-mechanics for weld integrity assessment. Sadhana-academy proceedings in engineering sciences, 20 ( ). pp. 233-246.

Ranganathan, M V and Chakrabarti, D M and Chakravorty, N (1979) Beneficiation of low grade graphites of Palamau district. NML Technical Journal, 21 (1-2). pp. 1-5.

Ranganathan, M V and Chakravorty, N (1985) Beneficiation studies on some important copper ores at NML-A review. NML Technical Journal, 27 (1-2). pp. 17-21.

Ranganathan, M V and Chakravorty, N (1984) Experimental processing of some of the Indian clays for commercial purposes. NML Technical Journal, 26 (3-4). pp. 52-55.

Ranganathan, M V and Mathur, G P and Altekar, V A (1982) From bench scale to industrial concentrator - the story of a 500-tpd beneficiation project. Cim Bulletin, 75 (845). p. 82.

Ranganathan, S (2004) Control of charge distribution to optimise metal quality in the production of ferro alloys. Journal of Metallurgy and materials Science, 46 (1). pp. 61-65.

Ranganathan, S (1991) The entity model of metallic solutions. Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, 15 (2). pp. 121-130.

Ranganathan, S (1998) Interaction of the crucible material with liquid steel during vacuum deoxidation in a magnesium oxide crucible-comparison of a model with experiment. NML Technical Journal, 40 (1). pp. 29-34.

Ranganathan, S (1991) Operational diagram for sulfide roasting. Zeitschrift fur metallkunde, 82 (9). pp. 709-712.

Ranganathan, S (2002) Phase rule - A view. Transactions of the Indian Institute of Metals, 55 (8). pp. 551-555.

Ranganathan, S (1997) Prediction of multi-phase equilibria in alloy systems by the technique of successive partial equilibration. Calphad, 21 (4). pp. 453-461.

Ranganathan, S (2000) Prediction of phase equilibria by the technique of successive partial equilibration - The general algorithm. Calphad, 24 (3). pp. 285-294.

Ranganathan, S (1999) A technique for prediction of carbonitride precipitation in high strength low alloy steels. Materials science and technology , 15 (5). pp. 523-526.

Ranganathan, S (1996) The technique of successive partial equilibria to predict precipitation of carbides in equilibrium with a solution phase. Calphad, 20 (4). pp. 461-470.

Ranganathan, S (1998) Thermochemical analysis of production of ferrochromium in submerged arc furnace. Ironmaking & Steelmaking, 25 (6). pp. 466-471.

Ranganathan, S and Godiwalla, K M (2001) Effect of preheat, bed porosity, and charge control on thermal response of submerged arc furnace producing ferrochromium. Ironmaking & Steelmaking, 28 (3). pp. 273-278.

Ranganathan, S and Godiwalla, K M (1998) Influence of pre-reduction of ore on the temperature profile inside a submerged-arc furnace producing ferro-chromium. Steel Research, 69 (12). pp. 476-481.

Ranganathan, S and Godiwalla, K M (2011) Influence of process parameters on reduction contours during production of ferrochromium in submerged arc furnace. Canadian Metallurgical Quarterly , 50 (1). pp. 37-44.

Ranganathan, S and Godiwalla, K M and Chakraborty, D (2011) Investigation of the kinetics of reduction of chromite ore lumps with large particles of coke. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 120 (2). pp. 71-78.

Ranganathan, S and Godiwalla , K M and Satyanarayana, N V (2011) Simulation of Ferrochrome Production in Submerged Arc Furnaces for Optimisation of Specific Energy Consumption. Steel Tech, 5 (3). pp. 25-40.

Ranganathan, S and Mishra, S N and Mishra, R and Singh, B K (2005) Control of silicon in high carbon ferrochromium produced in submerged arc furnace through redistribution of quartzite in the charge bed. Ironmaking & Steelmaking, 32 (2). pp. 177-184.

Ranganathan, S and Nath, Paras and Sivaram, K (2002) Optimization of specific energy consumption in the production of ferro-chromium by optimizing electrode-coordinates in submerged-arc furnace. Journal of Metallurgy and materials Science., 44 (3). pp. 127-133.

Ranganathan, S and Ramachandrarao, P (2003) Application of transformation diagrams to predict phase transformation in alloys. Calphad, 27 (1). pp. 39-56.

Ranganathan, S and Ramachandrarao, P (1997) Non ferrous metals industry in India-An overview. NML Technical Journal, 39 (1). pp. 1-14.

Ranganathan, S and Ramachandrarao, P (2010) Thermodynamic modelling of the spontaneous vitrification process using transformation diagrams. Calphad, 34 . pp. 387-392.

Ranganathan, S and Sen, P K and Mishra, S N and Mishra, R (1999) Application of thermo-chemical analysis to control the recovery of silicon during the production of ferro-chromium in submerged-arc furnace. Icarism '99: proceedings of the international conference on alternative routes of iron and steelmaking, 99 (3). pp. 277-279.

Ranjan, P and Pal, J (2016) Salt solution treatment to prevent the low temperature reduction degradation of haematite pellet. Ironmaking and Steelmaking , 43(9) (IF-0.985). pp. 688-696.

Ranjan, Priya and Goswami, B and Prasad, Sanjay and Sharma, G S and Singh, R P and Prasad Rao, S Siva and Das, Goutam (2013) Microstructure and properties of the new bainitic rail steels. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 119-130.

Ranjan, Rajiv and Das, T K and Munda, B N S and Mandal, Eisha (2017) Development of sensor based on GMI effect for structural health monitoring of engineering component. Journal of Metallurgy and Materials Science, 59(1) . pp. 23-27.

Ranjitham, A M and Khangaonkar, P R (1989) Hydration of calcined magnesite at elevated-temperatures under turbulent conditions. Minerals Engineering, 2 (2). pp. 263-270.

Ranjitham, A M and Khangaonkar, P R (1990) Leaching behaviour of calcined magnesite with ammonium-chloride solutions. Hydrometallurgy, 23 (2-3). pp. 177-189.

Rao, A S and Gupta, K K and Singh, Manjit and Upadhyay, A K and Sircar, J K (2006) Interelemental interference correction by computational method in flame atomic absorption spectroscopy (FAAS): Study of Fe-Mn system in silico-manganese ferro-alloy. Indian Journal Of Chemical Technology , 13 (1). pp. 77-80.

Rao, A S and Prasad, V V S and Baligidad, R G and Rao, V R and Sarma, D S (1999) Influence of hot working on electro slag remelted low alloy steel. Transactions of Indian Institute of Metals, 52 (2-3). pp. 139-146.

Rao, A U and Tiwari, S K and Kharb, A S and Chawla, V and Dubey, Paritosh and Goyat, M S and Saxena, V and Chawla, A K (2023) Impact of sputtering gas on the microstructural, mechanical and wetting properties of vanadium nitride coatings. Physica Scripta, 98(12) .

Rao, Addanki S and Dey, A K (1971) Corrosion of mild steel in the marine atmosphere at Digha. NML Technical Journal, 13 (1). pp. 27-31.

Rao, Addanki S and Gupta, K K and Sircar, J K and Srivastava, S C (2004) A rapid flame atomic absorption spectroscopic procedure for determination of lead in aluminium base alloys. Indian Journal Of Chemical Technology , 11 (4). pp. 475-478.

Rao, Addanki S and Lahiri, A K (1964) Chromate passivation of zinc. NML Technical Journal, 6 (3). pp. 10-14.

Rao, Addanki S and Lahiri, A K and Banerjee, T (1960) Corrosion of cast iron pots used for fusing caustic soda. NML Technical Journal, 2 (4). pp. 6-9.

Rao, Addanki S and Mukherjee, K P and Lahiri, A K (1962) Galvanic corrosion of ferrous and non-ferrous metals in the industrial atmosphere of Jamshedpur. NML Technical Journal, 4 (4). pp. 17-22.

Rao, Ch. Sridhar (1996) Titanium as an Automotive Material. NML Technical Journal, 38 (2). pp. 43-50.

Rao, D S and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Vijaya Kumar, T V (2009) Mineralogy and Geochemistry of a low grade iron ore sample from Bellary-Hospet sector, India and their implications on beneficiation. Journal of Minerals & Materials characterization & Engineering, 8 (2). pp. 115-131.

Rao, D S and Bhaskar Raju, G and Prabhakar, S and Vijaya Kumar, T V (2009) Beneficiation of siliceous limestone sample. AT Mineral Processing, 50 (6). pp. 36-47.

Rao, D S and Mohapatra, B K (2000) Microscopy in mineral processing - A review. Journal of Metallurgy and materials Science, 42 (1). pp. 31-42.

Rao, D S and Singh, Ratnakar and Banerjee, B and Bhattacharya, K K and Maulik, S C (1997) Characterisation and Beneficiation Studies on a Low Grade Fluorspar Sample. Vistas in Geological Research . pp. 1-8.

Rao, D S and Srikanth, S (2004) Failure of an idle air control valve in a gasoline-fuelled automobile. Engineering Failure Analysis, 11 (3). 313-322 .

Rao, D S and Subba Rao, S and Vijaya Kumar, T V and Reddy, P S R and Bhaskar Raju, G and Prabhakar, S and More, P (2005) Beneficiation of iron ore fines by conventional flotation, flotation column and dual extraction column – A pilot scale study. Powder Handling & Processing, 17 (2). pp. 88-93.

Rao, D S and Vijaya Kumar, T V and Angadi, Shivakumar and Prabhakar, S and Bhaskar Raju, G (2010) Effects of modulus and dosage of sodium silicate on limestone flotation. Maejo International Journal of Science and Technology, 4 (3). pp. 397-404.

Rao, D S and Vijaya Kumar, T V and Bhaskar Raju, G and Prabhakar, S (2011) Effect of the particle size on flotation performance of a siliceous limestone sample. Journal of Mining and Metallurgy, 47A (1). pp. 37-49.

Rao, D S and Vijaya Kumar, T V and Bhaskar Raju, G and Prabhakar, S (2011) Geochemical assessment of a siliceous limestone sample for cement making. Chin. J. Geochem, 30 . pp. 33-39.

Rao, D S and Vijaya Kumar, T V and Bhaskar Raju, G and Prabhakar, S and Ghosh, T K (2005) Alteration characteristics of illmenites from south India. Journal of Minerals and Materials Characterization and Engineering, 4 (1). pp. 47-59.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2005) Alteration characteristics of manavalakurichi beach placer illmenite, Tamilnadu. Journal of Applied Geochemistry, 7 (2). pp. 195-200.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2011) Beneficiation of Low-Grade Limestone Sample. Mining Science and Technology, 21 . pp. 631-636.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2011) Effectiveness of sodium silicate as gangue depressants in iron ore slimes flotation. International Journal of Minerals, Metallurgy and Materials, 18 ( 5). pp. 515-522.

Rao, G N (1970) Design of risers by the cooling curve method. NML Technical Journal, 12 (2). pp. 49-52.

Rao, G N and Gupte, P K (1971) Inoculation of cast iron. NML Technical Journal, 13 (1). pp. 19-26.

Rao, G N and Prasad, P R (1971) Increase in casting yield by use of exothermic riser. NML Technical Journal, 13 (2). pp. 49-51.

Rao, G N and Prasad, P R (1967) Riser dimensioning-a new approach for grey iron castings. NML Technical Journal, 9 (1). pp. 27-28.

Rao, G N and Ram, M (1983) Differential thermal analysis of bentonite clays. NML Technical Journal, 25 (3-4). pp. 27-34.

Rao, G N and Ram, M and Sharma, T L (1983) Electron diffraction analysis of gas treated Indian bentonite clays. NML Technical Journal, 25 (3-4). pp. 35-45.

Rao, G N and Sinha, S K and Beck, T A (1978) The effect of humidity and temperature on the hardening characteristics of sodium silicate bonded self-setting sand mixes. NML Technical Journal, 20 (1-2). pp. 24-29.

Rao, G N and Sinha, S K and Beck, T A (1978) The effect of humidity and temperature on the hardening characteristics of sodium silicate bonded self-setting sand mixes. NML Technical Journal, 20 (1-2). pp. 24-29.

Rao, G S and Yagodzinskyy, Y and Que, Z and Spatig, P and Seifert, H-P (2021) Study on hydrogen embrittlement and dynamic strain ageing on low-alloy reactor pressure vessel steels. Journal of Nuclear Materials, 556 .

Rao, Govinda R and Sahoo, K L and Ganguly, R I and Dash, R R and Narasaiah, N (2017) Effect of Flyash Treatment on the Properties of Al-6061 Alloy Reinforced with SiC–Al2O3–C Mixture. Transactions of the Indian Institute of Metals, 70(10) (IF-0.533). pp. 2707-2717.

Rao, K Kameswara (1972) Beneficiation of graphite from Srikakulam and Visakhapatnam Districts, Andhra Pradesh. NML Technical Journal, 14 (2). pp. 67-72.

Rao, K N P (1959) Trend of Steel Demand in India. NML Technical Journal, 1 (1). pp. 41-46.

Rao, K V and Dey, Shobhana (2007) Comparative Studies of Different Frothers vis-a-vis Lowering of Ash Content in a Coking Coal from West Bokaro, India. IE(I) Journal-MN, 87 . pp. 10-12.

Rao, K V Ramana and Chandwani, H K (1997) The influence of organics in the extraction and productivity of alumina. NML Technical Journal, 39 (3). pp. 157-166.

Rao, M Ananda (2012) Failure investigation of a boiler bank tube from a 77 X 2 MW coal based thermal power plant in the northwest region of India. Engineering Failure Analysis, 26(12) . pp. 325-331.

Rao, M Ananda and Babu, S R and Kumar, M V Pavan (2017) Failure investigation of a cooling coil tube in zinc roaster furnace. Engineering Failure Analysis, 77 (IF-1.676). pp. 118-123.

Rao, M Ananda and Babu, S R and Kumar, M V Pavan (2018) Stress corrosion cracking failure of a SS 316L high pressure heater tube. Engineering Failure Analysis, 90 (IF-1.676). pp. 14-22.

Rao, M Ananda and Kumar, M V Pavan (2015) An Investigation of a Dryer Can Failure in a Paper Mill. Journal of Failure Analysis and Prevention, 15(2) (computing). pp. 251-257.

Rao, M Ananda and Kumar, M V Pavan and Rao, S Subba and Narasaiah, N (2021) Rheological behavior of coal-water slurries of Indian coals using carboxymethylcellulose as dispersant- a comparative study. International Journal of Coal Preparation and Utilization, 41(10) . pp. 728-738.

Rao, M Ananda and Kumar, M V Pavan and Rao, S Subba and Narasaiah, N (2021) Rheological behavior of coal-water slurry using sodium tripolyphosphate as a dispersant. International Journal of Coal Preparation and Utilization, 41(6) . pp. 385-397.

Rao, M Ananda and Rajesh, K and Kumar, M V Pavan (2013) Evolution of Corrosion Damage to Cold rolled grain oriented Steel Sheets under rainwater followed by Ambient Atmosphere Exposure. Engineering Failure Analysis, 30 (IF-0.855). pp. 10-16.

Rao, M Ananda and Yerriswamy, V and Kumar, M V Pavan and Narasaiah, N (2019) A comparative study on the rheological properties of two coal water slurries with sodium tripolyphosphate as dispersant. International Journal of Coal Preparation and Utilization . pp. 1-13.

Rao, M D and Meshram, Pratima and Abhilash, and Singh, K K (2023) Validation of Bromide Leaching through Response Surface Methodology and Separation of Gold from Waste Printed Circuit Boards. Minerals, 13(4) .

Rao, M D and Meshram, R B and Singh, K K and Morrison, C A and Love, J B (2023) Life cycle analysis on sequential recovery of copper and gold from waste printed circuit boards. Waste Management, 171 . pp. 621-627.

Rao, M R K and Naidu, N V and Rao, H V Bhaskar (1962) Constitution and variation of lattice parameters of some Indian chromites with magnesia addition and subsequent firing. NML Technical Journal, 4 (4). pp. 4-11.

Rao, M R K and Sen, P C and Rao, H V Bhaskar (1959) Magnesite crucibles for use in high frequency induction furnace. NML Technical Journal, 1 (3). pp. 28-32.

Rao, Malleswara V. (1972) Behaviour of rocks in crushing. NML Technical Journal, 14 (2). pp. 89-92.

Rao, PDP and Peravadhanulu, A and Chakrabarti, D M and Chakravorty, N (1985) Beneficiation studies on molybdenite at the national metallurgical laboratory. Transactions of the Indian Institute of metals, 38 (2). pp. 153-155.

Rao, R G and Ghosh, M and Ganguly, R I and Bose, S C and Sahoo, K L (2020) Mechanical properties and age hardening response of Al6061 alloy based composites reinforced with fly ash. Materials Science and Engineering A, 772 (IF-4.652). p. 138823.

Rao, R K (1962) Mineralogy and liquidus determination of some low shaft furnace slag by hot stage microscopy. NML Technical Journal, 4 (2). pp. 21-25.

Rao, V V (1992) Centrifugal atomization and rapid-solidification processing of high-strength aluminum-alloys. Journal of Materials Science Letters , 11 (3). pp. 135-137.

Rao, V V (2003) Commentary on carbon pickup paper. Welding Journal , 82 (1). pp. 91-92.

Rao, V V (2004) An electrolytic method for studying the microstructure and grain size of Al-1.25 % Mn alloy. Indian Journal Of Engineering And Materials Sciences , 11 (3). pp. 224-226.

Rao, V V (1992) Microstructural features of rapidly solidified 7075 alloy containing 1.0 wt% Mn. Scripta Metallurgica et Materialia, 26 (5). pp. 819-823.

Rao, V V (1999) Microstructure and properties of high strength aluminium alloys subjected to rapid solidification processing. Indian Journal of Engineering and Materials sciences, 6 (3). pp. 158-163.

Rao, V V (2006) A modified gun technique for melt quenching of reactive alloys. Indian Journal Of Engineering And Materials Sciences , 13 (5). pp. 451-454.

Rao, V V (2001) Preparation and properties of Al2O3/Al in-situ composites by reactive melt penetration. Indian Journal of Engineering and Materials Sciences, 8 (3). pp. 161-164.

Rao, V V (2003) Preparation of net-shape Al2O3/Al3Ni in situ composites by reactive melt penetration. Indian Journal Of Engineering And Materials Sciences , 10 (5). pp. 424-426.

Rao, V V (2006) A structural study of copper-43at% cadmium alloy. Indian Journal Of Engineering And Materials Sciences , 13 (6). pp. 531-534.

Rao, V V and Ravindra, V (2020) Vacuum based coatings for engineering applications. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 57-61.

Rao, V V and Ravindra, V (2020) Vacuum furnaces for metallurgical processing. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 97-101.

Rao, V V and Ravindra, V (2020) Vacuum furnaces for metallurgical processing. Journals of Metallurgy and Materials Science, 62(1-2) . pp. 97-101.

Rao, V Venkateswara (1991) Centrifugal Atomisation and Rapid Solidification Processing of High Strength Aluminium Alloys Containing Transition Elements. NML Technical Journal, 33 (1-2). pp. 31-37.

Rao, V Venkateswara (2004) An electrolytic method for studying the microstructure and grain size of Al-1.25% Mn alloy. Indian Journal of Engineering and Materials Sciences, 11 (3). pp. 224-226.

Rao, V Venkateswara (1996) Rapid solidification processing of some aluminium alloys. NML Technical Journal, 38 (4). pp. 133-150.

Rao, Venkatesh and Mitra, A (1995) Phase-transformation studies on mn-al-c alloy, by dsc and electrical-resistivity measurements. Journal of Thermal Analysis, 44 (2). pp. 375-384.

Rao, Venkatesh and Pramanik, S and Tewari, C R and Singh, S R and Mohanty, O N (1989) Phase-transformations in Mn-Al permanent-magnet alloys. Journal of Materials Science, 24 (11). pp. 4088-4093.

Rao, W and Mukherjee, S P and Kumar, Rajendra (1978) Structure and mechanical-properties of rapidly solidified aluminum-alloys. Transactions of the Indian Institute of Metals, 31 (5-6). 383-&.

Rao , D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2004) Heavy mineral distribution in the beach sands of North coastal Andhra Pradesh and South coastal Tamilnadu. SGAT Bulletin, 5 (2). pp. 1-9.

Raposo, V and Mitra, A and Li, YF and Vazquez, M (2001) Spontaneous mechanical rotation of as-cast and annealed FeSiBNbCu wires under high-frequency axial ac field. Journal of Physics D-Applied Physics, 34 (9). pp. 1346-1351.

Raposo, V and Vazquez, M and Mitra, A (2003) Torsion dependence of giant magnetoimpedance in amorphous wires. Journal of Magnetism and Magnetic Materials, 254-255 ( ). pp. 179-181.

Rath, C and Anand, S and Das, R P and Sahu, K K and Kulkarni, S D and Date, S K and Mishra, N C (2002) Dependence on cation distribution of particle size, lattice parameter, and magnetic properties in nanosize Mn-Zn ferrite. Journal of Applied Physics, 91 (4). pp. 2211-2215.

Rath, C and Mishra, N C and Anand, S and Das, R P and Sahu, K K and Upadhyay, C and Verma, H C (2000) Appearance of superparamagnetism on heating nanosize Mn0.65Zn0.35Fe2O4. Applied Physics Letters, 76 (IF-4.00). pp. 475-477.

Rath, C and Sahu, K K and Kulkarni, S D and Anand, S and Date, S K and Das, R P and Mitra, N C (1999) Microstructure-dependent coercivity in monodispersed hematite particles. Applied Physics Letters, 75 (26). pp. 4171-4173.

Rath, R K and Mohanty, Sunati and Nayak, B and Singh, Ratnakar and Bhattacharyya, K K (2013) A Comparative Study on Processing of High Alumina Hematite Iron Ore by Gravity, Magnetic and Flotation Methods. Journal of Materials Science and Engineering A, 3(5) . pp. 349-354.

Rausch, Hans and Cappel, F (1960) Pilot Plants for the Agglomeration of Iron Ores on a Semi-Industrial Scale. NML Technical Journal, 2 (1). pp. 27-34.

Ravi Kumar, B (2007) Influence of Cold Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. METALLURGICAL AND MATERIALS TRANSACTIONS A, 38A (9). pp. 2085-2094.

Ravi Kumar, B (2010) Influence of crystallographic textures on tensile properties of 316L austenitic stainless steel. Journal of Materials Science, 45 (10). pp. 2598-2605.

Ravi Kumar, B (2012) Progress of Recrystallisation in Cold Rolled Austenitic Stainless Steel during Cyclic Thermal Process. Materials Science Forum . pp. 627-630.

Ravi Kumar, B (2012) Tensile deformation characteristics of bulk ultrafine-grained austenitic stainless steel produced by thermal cycling. Scripta Materialia, 66 (9). pp. 634-637.

Ravi Kumar, B and Bhattacharya, D K and Das, Swapan K and Ghosh Chowdhury, S (2000) Premature fatigue failure of a spring due to quench cracks. Engineering Failure Analysis, 7 (6). pp. 377-384.

Ravi Kumar, B and Das, Swapan K and Bhattacharya, D K (2003) Fatigue failure of helical compression spring in coke oven batteries. Engineering Failure Analysis, 10 (2). pp. 291-296.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Das, Arpan (2007) Effect of large strains on grain boundary character distribution in AISI 304L austenitic stainless steel. Materials Science and Engineering A, 454-455 . pp. 239-244.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2009) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2010) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Ravi Kumar, B and Das, Swapan K and Sharma, Sailaja and Sahu, J K (2010) Effect of thermal cycles on heavily cold deformed AISI 304L austenitic stainless steel. Materials Science and Engineering: A, 527 (4-5). pp. 875-882.

Ravi Kumar, B and Ghosh, M (2007) Surface and mid-plane texture evolution in austenite phase of cold rolled austenitic stainless steels. Materials Science and Engineering A, 457 (1-2). pp. 236-245.

Ravi Kumar, B and Ghosh Chowdhury, S and Narasaiah, N and Mahato, B and Das, Swapan K (2007) Role of Grain Boundary Character Distribution on Tensile Properties of 304L Stainless Steel. Metallurgical and Materials Transactions A, 38 (5). pp. 1136-1143.

Ravi Kumar, B and Madhukar, A and Srivastava, V C and Ghosh Chowdhury, S (2013) Chronology of product development at CSIR-NML. Steel Tech .

Ravi Kumar, B and Mahato, B and Bandopadhyay, N R and Bhattacharya, D K (2005) Comparison of rolling texture in low and medium stacking fault energy austenitic stainless steels. Materials Science and Engineering A, 394 (1-2). pp. 296-301.

Ravi Kumar, B and Mahato, B and Bandopadhyay, N R and Bhattacharya, D K (2005) Influence of strain-induced phase transformation on the surface crystallographic texture in cold-rolled-and-aged austenitic stainless steel. Metallurgical and Materials Transactions A, 36 (11). pp. 3165-3174.

Ravi Kumar, B and Mahato, B and Sharma, S and Sahu, J K (2009) Effect of Cyclic Thermal Process on Ultrafine Grain Formation in AISI 304L Austenitic Stainless Steel. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science , 40A (13). pp. 3226-3234.

Ravi Kumar, B and Mahato, B and Singh, Raghuvir (2007) Influence of Cold-Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. Metallurgical and Materials Transactions A, 38 (9). pp. 2085-2094.

Ravi Kumar, B and Mohanty, O N (1992) On the correct prediction of isothermal transformation diagrams for low-carbon and low-alloy steels - comment on available data. Scripta Metallurgica Et Materialia , 26 (11). pp. 133-137.

Ravi Kumar, B and Mohanty, O N and Biswas, A (1992) Welding of thin steel plates - a new model for thermal-analysis. Journal of Materials Science, 27 (1). pp. 203-209.

Ravi Kumar, B and Patel, N K and Mukherjee, K and Walunj, Mahesh and Mandal, G K and Venugopalan, T (2017) Ferrite channel effect on ductility and strain hardenability of ultra high strength dual phase steel. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 685 (IF-3.094). pp. 187-193.

Ravi Kumar, B and Sahu, J K and Das, Swapan K (2012) Influence of Annealing Process on Recrystallisation Behaviour of a Heavily Cold Rolled AISI 304L Stainless Steel on Ultrafine Grain Formation. Materials Science Forum , 715-716 . pp. 334-339.

Ravi Kumar, B and Sharma, S (2013) Recrystallisation Characteristics of Cold Rolled Austenitic Stainless Steel during Repeated Annealing. Recrystallization and Grain Growth V, 753 . pp. 157-162.

Ravi Kumar, B and Sharma, S and Kashyap, B P and Prabhu, N S (2015) Ultrafine grained microstructure tailoring in austenitic stainless steel for enhanced plasticity. Materials & Design, 68 (IF-3.171). pp. 63-71.

Ravi Kumar, B and Sharma, Sailaja and Mahato, B (2011) Formation of ultrafine grained microstructure in the austenitic stainless steel and its impact on tensile properties. Materials Science and Engineering A, 528 (6). pp. 2209-2216.

Ravi Kumar, B and Sharma, Sailaja and Munda, Parikshit and Minz, R K (2013) Structure and microstructure evolution of a ternary Fe–Cr–Ni alloy akin to super martensitic stainless steel. Materials & Design, 50 (IF-2.913). pp. 392-398.

Ravi Kumar, B and Singh, A K and Das, Samar and Bhattacharya, D K (2004) Cold rolling texture in AISI 304 stainless steel. Materials Science and Engineering A, 364 (1-2). pp. 132-139.

Ravi Kumar, B and Singh, A K and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2006) Deformation-induced transformation textures in metastable austenitic stainless steel. Materials Science and Engineering A, 429 (1-2). pp. 205-211.

Ravi Kumar, B and Singh, Raghuvir and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2005) Effect of texture on corrosion behavior of AISI 304L stainless steel. Materials Characterization, 54 (2). pp. 141-147.

Ravichandran, K and Kumar, N M and Subash, K and Sankara Narayanan, T S N (2001) Mannich base derivatives - A novel class of corrosion inhibitors for cooling water systems. Corrosion Reviews, 19 (1). pp. 29-42.

Ravichandran, K and Sankara Narayanan, T S N (2004) Corrosion of brass in cooling water systems - Role of Mannich base derivatives. Corrosion Reviews , 22 (1). pp. 71-84.

Ravichandran, K and Sankara Narayanan, T S N (2002) Effective screening of scaling inhibitors for cooling water systems - Development of an accelerated electrochemical method. Corrosion Reviews, 20 (1-2). pp. 105-113.

Ravichandran, K and Sankara Narayanan, T S N (2001) Studies on acceleration of the low temperature zinc phosphating processes. Transactions of the Institute of Metal Finishing, 79 (4). pp. 143-145.

Ravichandran, K and Sivanandh, H and Sundara Raman, Ganesh and Hariharasudan, T and Sankara Narayanan, T S N (2000) Acceleration of the phosphating process—the utility of galvanic coupling. Metal Finishing, 98 (9). pp. 48-54.

Ravikiran, K and Das, G and Kumar, S and Sivaprasad, K and Ghosh, M (2019) Evaluation of Microstructure at Interfaces of Welded Joint Between Low Alloy Steel and Stainless Steel. Metallurgical and Materials Transactions A (50(6)). pp. 2784-2797.

Ravikiran, K and Das, Goutam and Kumar, Suranjit and Singh, PK and Sivaprasad, K and Ghosh, M (2019) Narrow gap welding of low alloy and austenitic stainless steels using different Inconel alloys: comparison of microstructure and properties. Materials Research Express, 6(9) (IF-1.449).

Ravikiran, K and Mehtani, H and Sivaprasad, K and Prasad , M J N (2022) Influence of nickel-based buttering material on welded joint between SA508 low alloy steel and 304LN stainless steel. International Journal of Pressure Vessels and Piping, 195 .

Ray, A and Sivaprasad, S and Chakrabarti, D (2012) A critical grain size concept to predict the impact transition temperature of Ti-microalloyed steels. International of Fracture, 173(2) . pp. 215-222.

Ray, A K and Goswami, B (2018) Forefronts of nanoinhibitors to corrosion on metals. Journal of Metallurgy and Materials Science, 60(3) . pp. 157-171.

Ray, A K and Tarafder, S and Das, D K and Venkatraman, B and Roy, P K and Goswami, B and Tiwari, Y N and Palit Sagar, S and Ranganath, V R and Das, Goutam and Chaudhuri, S and Ghosh, R N (2004) Damage resistance of thermal barrier coated superalloy in combustion chamber liner. Journal of Metallurgy and Materials Science, 46 (4). pp. 205-212.

Ray, A K and Tiwari, Y N and Sinha, R K and Roy, S K and Singh, R and Chaudhuri, S (2000) Mechanical Property Evaluation and Remaining Life Assessment of Service - Exposed Steam Pipe of Boilers in : Thermal Power Plant. High Temperature Materials and Process, 20 (1). pp. 1-12.

Ray, Ajoy K and Bhattacharya, D K and Das, Goutam (1996) Acoustic emission studies during indentation on ceramic and ceramic composite. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 2455-2458.

Ray, Ajoy K and Chatterjee, S and Singh, J K and Bapari, H (2015) Thermal Exfoliation of Natural Cellulosic Material for Graphene Synthesis. Journal of Materials Engineering and Performance, 24(1) (IF-0.981). pp. 80-84.

Ray, Ajoy K and Das, Swapan K and Roy, P K and Banerjee, S (1995) Fatigued and fractured regions in a silicon-carbide whisker-reinforced alumina composite. Journal of Biomaterials Science, Polymer Edition, 15 (3). pp. 191-199.

Ray, Ajoy K and Kar , Abhijit and Kori, S A and Pathak , L C and Sonnad, A N (2013) Graphite-to-304SS Braze Joining by Active Metal-Brazing Technique : Improvement of Mechanical Properties. Journal of Materials Enginnering and Performance, 22(1) (IF-0.915). pp. 258-266.

Ray, Ajoy K and Sahu, Ranjan K and Rajnikanth, V and Bapari, H and Ghosh, M and Paul, Parimal (2012) Preparation and characterization of graphene and Ni-decorated graphene using flower petals as the precursor material. Carbon, 50 (11). pp. 4123-4129.

Ray, Ajoy K and Tiwari, Y N and Chaudhuri, S and Ranganath, V R and Sivaprasad, S and Roy, P K and Das, Goutam and Ghosh Chowdhury, S and Kumar, P and Ghosh, R N (2002) Remaining life assessment of service exposed reheater and superheater tubes in a boiler of a thermal power plant. Engineering Failure Analysis , 21 (1-2). pp. 109-121.

Ray, Ajoy K and Venkateswarlu, K and Chaudhury, S K and Das, S K and Ravi Kumar, B and Pathak, L C (2002) Fabrication of TiN reinforced aluminium metal matrix composites through a powder metallurgical route. Materials Science and Engineering A, 338 (1-2). pp. 160-165.

Ray, Ashok K (2000) Failure mode of thermal barrier coatings for gas turbine vanes under bending. International Journal of Turbo & Jet-engines, 17 (1). pp. 1-24.

Ray, Ashok K (1998) A new technique for precracking ceramic specimens in fatigue and fracture. Journal of the European Ceramic Society, 18 (12). pp. 1655-1662.

Ray, Ashok K and Banerjee, S and Fuller, E R and Das, Swapan K (1994) Fractography as well as fatigue and fracture of 25-wt-percent silicon-carbide whisker-reinforced alumina ceramic composite. Bulletin of Materials Science, 17 (6). pp. 893-910.

Ray, Ashok K and Bose, S C and De, P K and Das, D K (2010) Lifetime evaluation of a thick thermal barrier coated superalloy used in turbine blade. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 527 (21-22). pp. 5474-5483.

Ray, Ashok K and Bose, S C and De, P K and Mandal, D and Alam, H Z and Sharma, VSRA and Das, D K (2010) Evaluation of the Lifetime and Effect of Furnace Thermal Cycling on Stress Rupture Behaviour of a Thermal Barrier Coated Superalloy Used in a Turbine Blade. Canadian Metallurgical Quarterly, 49 (2). pp. 191-214.

Ray, Ashok K and Das, D K (2006) Accelerated creep resistance of thermal barrier coated superalloy. Materials Letters, 60 (25-26). pp. 3019-3022.

Ray, Ashok K and Das, D K and Venkataraman, B and Roy , P K and Goswami, B and Roy, Nilima and Das, S K and Parida, N and Tarafder, S and Chaudhuri, S and Sahay, S K and Ghosh, R N (2005) Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners. Materials Science and Engineering A, 405 (1-2). pp. 194-200.

Ray, Ashok K and Das, Goutam and Ranganath, V R and Goswami, B and Ghosh, R N (2004) Failure of connecting pins of a compressor disc in an aero engine. Engineering Failure Analysis, 11 (4). pp. 613-617.

Ray, Ashok K and Das, Swapan K and Mondal, S and Ramachandrarao, P (2004) Microstructural characterization of bamboo. Journal of Materials Science, 39 (3). pp. 1055-1060.

Ray, Ashok K and Das, Swapan K and Pathak, L C (2003) Synthesis of silicon carbide mats using natural fibers. Materials Letters, 57 (5-6). pp. 1120-1123.

Ray, Ashok K and Das, Swapan K and Roy, P K and Banerjee, S (1995) Fractography of fatigued and fractured regions in a silicon carbide whisker reinforced alumina composite. Journal of the European Ceramic Society, 15 (3). pp. 191-199.

Ray, Ashok K and Diwakar, K and Prasad, B N and Tiwari, Y N and Ghosh, R N and Whittenberger, J D (2007) Long term creep–rupture behaviour of 813 K exposed 2.25–1Mo steel between 773 and 873 K. Materials Science and Engineering A, 454-455 . pp. 124-131.

Ray, Ashok K and Diwakar, K and Roy, Nilima and Das, H K and Sahu, J K and Ghosh, R N (2008) Creep behaviour and stress analysis of a seventeen-year service-exposed primary super heater tube in a thermal power plant. Canadian Metallurgical Quarterly, 47 (4). pp. 469-478.

Ray, Ashok K and Diwakar, K and Sahu, J K and Das, H K and Roy, Nilima and Ghosh, R N (2008) Stress Analysis and Creep Behavior of Service Exposed Primary Superheater Tube in a Thermal Power Plant. High Temperature Materials And Processes, 27 (2). pp. 79-89.

Ray, Ashok K and Dwarakadasa, E S and Das, D K and Ranganath, V R and Goswami, B and Sahu, J K and Whittenberger, J D (2007) Fatigue behavior of a thermal barrier coated superalloy at 800°C. Materials Science and Engineering A, 448 (1-2). pp. 294-298.

Ray, Ashok K and Fuller, E R and Banerjee, S (1996) Fatigue crack growth rate and fracture toughness of 25 wt% silicon carbide whisker reinforced alumina composite with residual porosity. Journal of the European Ceramic Society, 16 (5). pp. 503-513.

Ray, Ashok K and Goswami, B (2004) Applications of thermal barrier coating system in gas turbines - A review. Journal of Metallurgy and materials Science, 46 (1). pp. 1-22.

Ray, Ashok K and Goswami, B (2017) Stiffness in materials engineering. Journal of Metallurgy and Materials Science, 59(2) . pp. 75-83.

Ray, Ashok K and Goswami, B and Kar, Abhijit and Ray, Ajoy K and Das, H K and Roy, P K and Kumar, S B and Bose, S C (2008) Damage resistance of a thermal barrier coated superalloy for combustor liners in aero turbines during fatigue and creep. Canadian Metallurgical Quarterly, 47 (4). pp. 479-493.

Ray, Ashok K and Goswami, B and Kumar, S B and Das, D and Das, Swapan K and Sharma, A and Das, D K (2008) Influence of thermally grown oxide scale on fatigue resistance of a thermal barrier coated superalloy. Canadian Metallurgical Quarterly, 47 (1). pp. 99-109.

Ray, Ashok K and Goswami, B and Kumar, S B and Sahay, S K (2008) Damage assessment and life prediction of TBC systems. Journal of Metallurgy and Materials Science, 50 (3). pp. 127-150.

Ray, Ashok K and Goswami, B and Kumar, S B and Sahay, S K (2008) Fatigue in gas turbine components. Journal of Metallurgy and Materials Science, 50 (2). pp. 85-105.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2014) Frontiers of micro-alloyed steel for industrial merchandising - 3. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 77-91.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2013) Frontiers of micro-alloyed steel for industrial merchandising-1. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 83-98.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2014) Frontiers of micro-alloyed steel for industrial merchandising-2. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 1-14.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2013) High strength low alloy steels. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 21-36.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2013) Studies on pyrometallurgy of vanadium bearing iron, steel and slag. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 99-111.

Ray, Ashok K and Goswami, B and Singh, M P and Das, D K and Roy, Nilima and Ravi Kumar, B and Dash, Byomkesh and Ray, Ajoy K and Das, Goutam and Rupa, P K P and Parida, N and Das, Arpan and Swaminathan, J and Dwarakadasa, E S (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. Materials Characterization, 57 (3). pp. 199-209.

Ray, Ashok K and Goswami, B and Tiwari, Y N and Das, H K and Das, D K and Kumar, Sashi Bhusan (2010) Fatigue and creep damage resistance of a thermal barrier coated superalloy for combustor liners in aero turbines. Transactions of The Indian Institute of Metals, 63 (2-3). pp. 485-491.

Ray, Ashok K and Guguloth, K and Swaminathan, J and Bose, S C and Roy, Nilima and Tiwari, Y N and Roy, P K and Alam, Z and Sharma, VSRA and Joshi, Srikanth V and Venkataraman, B and Das, D K (2009) Damage Resistance of a Thermal Barrier Coated Superalloy Used in Aero Turbine Blade under Accelerated Creep Condition. High Temperature Materials And Processes, 28 (1-2). pp. 35-53.

Ray, Ashok K and Kumar, S and Guguloth, K and Gunjan, M K and Goswami, B and Bose, S C (2011) Microstructural studies and remnant life assessment of eleven years service exposed reformer tube. Materials Science and Engineering A, 529 (1). pp. 102-112.

Ray, Ashok K and Mahanty, G and Ghose, A (1991) Effect of catalysts and temperature on silicon-carbide whiskers formation from rice husk. Journal of Materials Science, 10 (4). pp. 227-229.

Ray, Ashok K and Mishra, K K and Das, Goutam and Chaudhary, P N (2000) Life of rolls in a cold rolling mill in a steel plant-operation versus manufacture. Engineering Failure Analysis, 7 (1). pp. 55-67.

Ray, Ashok K and Mondal, S and Das, Swapan K and Ramachandrarao, P (2005) Bamboo—A functionally graded composite-correlation between microstructure and mechanical strength. Journal of Materials Science, 40 (19). pp. 5249-5253.

Ray, Ashok K and Mukhopadhyay, N K and Bhattacharya, D K and Dwarakadasa, E S and Parida, N (1999) Studies on indentation fracture toughness on ceramic and ceramic composite using acoustic emission technique. Bulletin of Materials Science, 22 (1). pp. 25-32.

Ray, Ashok K and Roy, Nilima and Dash, Byomkesh and Das, D K and Ranganath, V R and Goswami, B and Singh, M P and Tiwari, Y N and Roy, P K and Das, H K and Sanyal, D and Dwarakadasa, E S (2006) High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines. High Temperature Materials And Processes , 25 (3). pp. 109-119.

Ray, Ashok K and Roy, Nilima and Godiwalla, K M (2001) Crack propagation studies and bond coat properties in thermal barrier coatings under bending. Bulletin of Materials Science, 24 (2). pp. 203-209.

Ray, Ashok K and Roy, Nilima and Kar, Abhijit and Ray, Ajoy K and Bose, S C and Das, Goutam and Sahu, J K and Das, D K and Venkataraman, B and Joshi, Srikanth V (2009) Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade. Materials Science and Engineering: A, 505 (1-2). pp. 96-104.

Ray, Ashok K and Roy, Nilima and Matwa, M and Davuluri, A and Kumari, A and Kumar, P and Mundhada, D and Kaushal, V and Roy, B N (2014) Uncertainty in Damage Assessment and Remaining Life Prediction of Engineering Materials Used In Petrochemical Industry. Petroleum & Environmental Biotechnology, 5(4) . pp. 1-16.

Ray, Ashok K and Roy, Nilima and Raj, A and Roy, B N (2016) Structural integrity of service exposed primary reformer tube in a petrochemical industry. International Journal of Pressure Vessels and Piping, 137 (IF-1.28). pp. 46-57.

Ray, Ashok K and Roy, P K (2012) High Cycle Fatigue and Cyclic Plastic Deformation Behav-iour of High Temperature Oxidation Resistant Titanium Aluminide Coated IMI834 Alloy at 873K. High Temperature Materials Proceeding, 31 . pp. 691-699.

Ray, Ashok K and Sahay, S K and Goswami, B (2003) Assessment of service exposed boiler tubes. Engineering Failure Analysis, 10 (6). pp. 645-654.

Ray, Ashok K and Singh, S R and Kailath, A J and Roy, P K and Das, Swapan K and Ghosh, R N (2005) Fatigue and creep damage and its correlation with microstructure of a service exposed first stage turbine blade in a power plant. Journal of Metallurgy and Materials Science, 47 (2). pp. 59-69.

Ray, Ashok K and Singh, S R and Swaminathan, J and Roy, P K and Tiwari, Y N and Bose, S C and Ghosh, R N (2006) Structure property correlation study of a service exposed first stage turbine blade in a power plant. Materials Science and Engineering A, 419 (1-2). pp. 225-232.

Ray, Ashok K and Sinha, S K and Tiwari, Y N and Swaminathan, J (2003) Analysis of failed reformer tubes. Engineering Failure Analysis, 10 (3). pp. 351-362.

Ray, Ashok K and Steinbrech, R W (1999) Crack propagation studies of thermal barrier coatings under bending. Journal of the European Ceramic Society, 19 (12). pp. 2097-2109.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S (2000) Evaluation of mechanical properties and assessment of residual life of a service-exposed water wall tube. Engineering Failure Analysis, 7 (6). pp. 393-402.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Ranganath, V R and Sivaprasad, S and Roy, P K and Das, Goutam and Ghosh, Sabita and Kumar, P and Ghosh, R N (2002) Remaining life assessment of service exposed reheater and superheater tubes in a boiler of a thermal power plant. High Temperature Materials and Processes, 21 (1-2). pp. 109-121.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Tarafder, S and Singh, R (2000) Residual life assessment of FCCU reactor plate. Transactions of the Indian Institute of Metals, 53 (3). pp. 427-433.

Ray, Ashok K and Tiwari, Y N and Guguloth, K and Das, Goutam and Gunjan, M K and Bose, S C and Ghosh, R N (2011) Health assessment of 22 years service-exposed radiant tube from an oil refinery. Engineering Failure Analysis, 18 (3). pp. 1067-1075.

Ray, Ashok K and Tiwari, Y N and Khan, A J and Roy, P K and Das, Goutam and Singh, Raghubir (2004) Health assessment of radiant heater tube. High Temperature Materials and Processes , 24 (1). pp. 35-45.

Ray, Ashok K and Tiwari, Y N and Roy, P K and Chaudhuri, S and Bose, S C and Ghosh, R N and Whittenberger, J D (2007) Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant. Materials Science and Engineering A, 454-455 . pp. 679-684.

Ray, Ashok K and Tiwari, Y N and Singh, R and Tarafder, S (2000) Prediction of remaining life of a FCCU reactor plate. Engineering Failure Analysis, 7 (2). pp. 75-86.

Ray, Ashok K and Tiwari, Y N and Sinha, A N and Sinha, R K and Singh, R and Chaudhuri, S (1998) Life prediction of service exposed reactor and distillation column materials used in a petrochemical industry. Engineering Failure Analysis, 5 (4). pp. 289-298.

Ray, Ashok K and Tiwari, Y N and Sinha, R K and Chaudhuri, S and Singh, R (2000) Residual life prediction of service exposed main steam pipe of boilers in a thermal power plant. Engineering Failure Analysis, 7 (5). pp. 359-376.

Ray, Ashok K and Tiwari, Y N and Sinha, R K and Sinha, S K and Roy, P K and Singh, Raghubir and Chaudhuri, S (2001) Mechanical property evaluation and remaining life assessment of service-exposed steam pipe of boilers in a thermal power plant. High Temperature Materials and Processes, 20 (1). pp. 39-50.

Ray, Ashok K and Tiwari, Y N and Sinha, S K and Singh, Raghubir and Chaudhuri, S (2002) Remnant life assessment of service-exposed pendent superheater tubes. Engineering Failure Analysis, 9 (1). pp. 83-92.

Ray, Ashok K and Whittenberger, J D (2009) Stress rupture behavior of a thermal barrier coated AE 437A Ni-based superalloy used for aero turbine blades. Materials Science and Engineering: A, 509 (1-2). pp. 111-114.

Ray, K K and Dutta, K and Sivaprasad, S and Tarafder, S (2010) Fatigue damage of AISI 304 LN stainless steel: Role of mean stress. Procedia Engineering, 2 (1). pp. 1805-1813.

Ray, Kalyan Kumar and Roy, Himadri and Ray, Ayan and Dutta, Krishna and Tarafder, S (2013) Deformation, fatigue and fracture vis-à-vis deformation induced martensite in AISI 304LN stainless steel. Advanced Materials Research, 794 . pp. 415-428.

Ray, M K and Bagani , K and Sardar, M and Banerjee, S and Srivastava, V C and Mukhopadhyay, N K (2013) Electrical and magnetic property of Al 62 Cu 25.5 Fe 12.5 icosahedral quasicrystal: Spin-orbit scattering. AIP Conference Proceedings, 1512 . pp. 994-995.

Ray, Mallar and Basu, T S and Jana, Arpita and Bandopadhyay, N R and Hossain, S M and Pramanick, A K and Kile, Robert F (2010) Luminescent core-shell nanostructures of silicon and silicon oxide: Nanodots and nanorods. Journal of Applied Physics, 107 (6). 064311.

Ray, Mallar and Sarkar, S and Bandyopadhyay, N R and Hossain, S M and Pramanick, A K (2009) Silicon and silicon oxide core-shell nanoparticles: Structural and photoluminescence characteristics. Journal of Applied Physics, 105 (7). 074301.

Ray, Samit K and Mohanty, O N (1989) On predicting the extent of magnetic aging in electrical steels. Journal of Magnetism and Magnetic Materials, 78 (2). pp. 255-262.

Rayalu, S and Premchand, and Shalini, and Ramachandrarao, P (1997) Characterisation of wastes from processing of sea nodules. NML Technical Journal, 39 (2). pp. 71-76.

Reddy, A and Kotiveerachari, B (2011) Influence of microstructural changes caused by ageing on wear behaviour of Al6061/SiC composites. Journal of Metallurgy and Materials Science, 53 (1). pp. 31-39.

Reddy, G and Sahoo, K L and Ganguly, R I and Dash, R R and Rao, P S P and Reddy, G S (2016) Cast and age hardening behaviour of Al6061 alloy reinforced with an in-situ ceramic composite prepared by carbo thermal reduction of fly ash in plasma reactor. Journal Of Composite Materials, 50(22) (IF-1.494). pp. 3027-3041.

Reddy, G J and Srivastava, V C and Rudrakshi, G B (2013) Wear Behavior Of Spray Formed Al–20 Mg 2 Si Alloy. International Journal of Engineering Research & Technology, 2(2) . pp. 1-9.

Reddy, M L P and Ramamohan, T R and Sahu, S K and Thakur, P and Chakravortty, V (2000) Mixed-ligand chelate extraction of thorium(IV) and uranium(VI) with thenoyltrifluroacetone and various imidazoles. Radiochimica Acta, 88 . pp. 405-410.

Reddy, M L P and Sahu, S K and Chakravortty, V (2000) 4-Acylbis(1-Phenyl-3-Methyl-5-Pyrazolones)as extractants for f-elements. Solvent Extraction and Ion Exchange, 18 (6). pp. 1135-1153.

Reddy, M L P and Varma, R L and Ramamohan, T R and Sahu, S K and Chakravortty, V (1998) Cyanex 923 as an extractant for trivalent lanthanides and yttrium. Solvent Extraction and Ion Exchange, 16 (3). pp. 795-812.

Reddy, Purushottam R and Raghavendra, N R and Sathyagangadharudu, A (2010) The study of banded iron formations of coppermountain belt near Torangal, Bellary District, Karnataka State (India). Journal of Metallurgy and Materials Science, 52 (2). pp. 161-168.

Reddy, S and Wasnik, S and Guha, Avijit and Kumar, J M and Sinha, Arvind and Singh, Shashi (2013) Evaluation of nano-biphasic calcium phosphate ceramics for bone tissue engineering applications : In vitro and preliminary in vivo studies. Journal of Biomaterials Applications, 27(5) (IF-2.640). pp. 565-575.

Reddy, S P and Sarath, K Sai (2013) Characterstics of Al-15% graphite composites. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 73-76.

Reddy, Sujatha and Amarnath, Miriyala and Sinha, Arvind and Singh, Shashi (2011) NanoBiphasic Ceramics For Tissue Engineering: A Review. Journal of Bionanoscience, 5 (1). pp. 26-32.

Reeve, M R (1961) Present Trends in Methods of Production of Aluminium Alloy Slabs and Billets for Working. NML Technical Journal, 3 (1). pp. 46-55.

Rekar, C.F. and Zakrajsek, J. (1964) Some experiences and prospects with low-grade iron ores of Rajasthan. NML Technical Journal, 6 (2). pp. 35-38.

Rezai, B and Amini, A and Jorjani, E (2001) The floatation studies on coal fines from Galeran area of Iran. Journal of Metallurgy and materials Science, 43 (3). pp. 175-179.

Robiette, A G (1962) The Extraction of Vanadium from Titaniferous Iron Ores. NML Technical Journal, 4 (1). pp. 26-29.

Roessler, Klaus (1995) The non rusting iron pillar at Dhar. NML Technical Journal, 37 (4). pp. 143-154.

Rohatgi, P K and Bowander, B (1972) Potential use of technological forecasting in planning materials research. NML Technical Journal, 14 (4). pp. 141-146.

Rojas, Jose I and Bathula, Venkata Siva and Sahoo, K L and Crespo, Daniel (2018) Viscoelastic behaviour of a novel aluminium metal matrix composite and comparison with pure aluminium,aluminum alloys and a composite made of Al-Mg-Si alloy reinforced with SiC particles. Journal of Alloys and Compounds, 744 (IF-3.133). pp. 445-452.

Rout, S and Abhilash, and Meshram, Pratima and Zhang, PT (2023) A Comprehensive Review on Occurrence and Processing of Phosphate Rock Based Resources- Focus on REEs. Mineral Processing and Extractive Metallurgy Review .

Routh, Anup Kumar and Samanta, Manas (2013) Role of public library in intellectual property rights [In Bengali] (মেধাস্বত্ত সংরক্ষনে সাধারণ গ্রন্থাগারের ভূমিকা). Granthagar, 63(4) . pp. 88-91.

Roy, A and Manna, I and Chattoraj, I (2014) Anomalies in hydrogen enhanced fatigue of a high strength steel. International Journal of Fatigue, 59 (IF-1.730). pp. 14-22.

Roy, A and Sahoo, K L and Chattoraj, I (2007) Electrochemical response of AlNiLa amorphous and devitrified alloys. Corrosion Science, 49 (6). pp. 2486-2496.

Roy, A and Tarafder, S and Sivaprasad, S and Das, Swapan K and Manna, I and Chattoraj, I (2007) Fatigue crack growth retardation in an HSLA steel in benign environments. International Journal of Fatigue, 29 (2). pp. 254-260.

Roy, Ajoy K and Mandhyan, A K and Sahoo, K L and Banhart, J and Chattoraj, I (2009) Electrochemical response of amorphous and devitrified Al-Ni-La-X (X = Ag, Cu) alloys. Materials and Corrosion / Werkstoffe und Korrosion, 60 (6). pp. 431-437.

Roy, Amritendu and Ghosh, M and Gourkar, H and De, PS (2019) Microstructure, indentation and first principles study of AlCuFeMn alloy. Materialia .

Roy, Arijit and Manna, I and Tarafder, S and Chattoraj, I (2013) Hydrogen interactions with overload in modifying fatigue crack growth rate recovery in an HSLA steel. Materials Science and Engineering A, 579 (IF-2.108). pp. 9-17.

Roy, Arijit and Manna, I and Tarafder, S and Sivaprasad, S and Paswan, S and Chattoraj, I (2013) Hydrogen enhanced fatigue crack growth in an HSLA steel. Materials Science and Engineering A, 588 (IF-2.108). pp. 86-96.

Roy, G G and Chaudhary, P N and Minj, R K and Goel, R P (2001) Dephosphorization of ferromanganese using BaCO3-based fluxes by submerged injection of powders: A preliminary kinetic study. Metallurgical and Materials Transactions B, 32 (3). pp. 558-561.

Roy, H and Bar, H N and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Acoustic emission during monotonic and cyclic fracture toughness tests of 304LN weldments. International Journal of Pressure Vessels and Piping, 87 (10). pp. 543-549.

Roy, H and Parida, N and Sivaprasad, S and Tarafder, S and Ray, K K (2008) Acoustic emissions during fracture toughness tests of steels exhibiting varying ductility. Materials Science and Engineering: A, 486 (1-2). pp. 562-571.

Roy, H and Ray, A and Barat, K and Hochmuth , C and Sivaprasad, S and Tarafder, S and Glatzel, U and Ray, K K (2013) Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steel. Materials Science & Engineering A, 561 (IF-2.003). pp. 88-99.

Roy, H and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Monotonic vis-à-vis cyclic fracture behaviour of AISI 304LN stainless steel. Engineering Fracture Mechanics, 76 (12). pp. 1822-1832.

Roy, Himadri and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Crack Tip Damage Mechanism under Monotonic and Cyclic Loading Conditions. Key Engineering Materials , 417-418 (8). pp. 105-108.

Roy, Himadri and Sivaprasad, S and Tarafder, S and Ray, K K (2012) Cyclic fracture behaviour of 304LN stainless steel under load and displacement control modes. Fatigue & fracture of engineering materials & structures, 35 (2). pp. 108-113.

Roy, Mrinal and Bhatnagar, P P (1960) Studies on the extraction of vanadium pentoxide from vanadium bearing titaniferrous magnetite ore of Bihar and Orissa. NML Technical Journal, 2 (2). pp. 27-31.

Roy, Nilima and Bagui, S and Sahu, J K and Ray, A K (2013) Creep characterization and damage assessment of long term service exposed P-22 grade of steel. Materials Science and Engineering A, 560 (IF-2.108). pp. 802-810.

Roy, Nilima and Bhardwaj, A and Kujur, A and Ghosh, M and Singh, R and Meena, L K and Das, Goutam and Chattoraj, I (2018) Effect of heterogeneities on pitting potential of line pipe steels: An adaptive neuro-fuzzy approach. Corrosion science, 133 (IF-5.245). pp. 327-335.

Roy, Nilima and Bose, S C and Ghosh, R N (2010) Stochastic aspects of evolution of creep damage in austenitic stainless steel. Materials Science and Engineering: A, 527 (18-19). pp. 4810-4817.

Roy, Nilima and Das, Avimanyu and Ray, Ashok K (2015) Simulation and quantification of creep damage. International Journal of Damage Mechanics (IF-1.495).

Roy, Nilima and Ghosh, R N (1997) Modelling effects of specimen size and shape on creep of metals and alloys. Scripta Materialia, 36 (12). pp. 1367-1372.

Roy, Nilima and Ghosh, R N and Bose, S C (2010) A stochastic model for evolution of creep damage in engineering materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 665-669.

Roy, Nilima and Ghosh, R N and Pandey, M C (2001) Modelling of interaction between creep and oxditaion behaviour for engineering materials. ISIJ International, 41 (8). pp. 915-921.

Roy, Nilima and Godiwalla, K M and Chaudhuri, S and Ray, Ashok K (2001) Simulation of bond coat properties in thermal barrier coatings during bending. High Temperature Materials and Processes, 20 (2). pp. 103-116.

Roy, Nilima and Godiwalla, K M and Dwarakadasa, E S and Ray, Ashok K (2004) Elasto-plastic deformation in thermal barrier coated superalloys. Scripta Materialia, 51 (7). pp. 739-743.

Roy, Nilima and Guguloth, K and Bagui, Sumanta and Tiwari, Y N and Ray, Ashok K (2013) Damage assessment of service exposed reactor and distill-ation column materials of a petrochemical industry. Engineering Failure Analysis, 28 (IF-0.855). pp. 289-301.

Roy, Nilima and Raj, A and Roy, B N and Ray, Ashok K (2015) Creep deformation and damage evaluation of service exposed reformer tube. Canadian metallurgical quarterly, 54(2) (IF-0.5). pp. 205-222.

Roy, P K (2018) Creep Rupture Analysis and Life Estimation of 1.25Cr-0.5Mo, 2.25Cr-1Mo and Modified 9Cr-1Mo Steel: A Comparative Study. Journal of The Institution of Engineers (India): Series D, Online .

Roy, R K and Murugaiyan, Premkumar and Panda, A K and Mitra, A (2019) Compositional optimization of high induction (> 1.7T) FeCo-based nanocomposite alloys with enhancement of thermo-physical and magnetic properties. Physica B: Condensed Matter , 566 . pp. 71-76.

Roy, Rajat K and Bapari, H and Panda, A K and Mitra, A (2013) Development of high strength stainless steel brazed joints using rapidly solidified filler alloys. Science and Technology of Welding and Joining, 18(3) (IF-1.274). pp. 216-221.

Roy, Rajat K and Das, Siddhartha (2006) New combination of polishing and etching technique for revealing grain structure of an annealed aluminum (AA1235) alloy. New combination of polishing and etching technique for revealing grain structure of an annealed aluminum (AA1235) alloy, 41 . pp. 289-292.

Roy, Rajat K and Das, Swapan K (2013) Failure of LTSH tubes in a coal fired thermal power plant. Metal News, 16(2) (Non-SCI). pp. 14-16.

Roy, Rajat K and Das, Swapan K and Panda, A K and Mitra, Amitava (2014) Analysis of Superheater Boiler Tubes Failed through Non-linear Heating. Procedia Engineering, 86 (NIF-0.629). pp. 926-932.

Roy, Rajat K and Das, Swapan K and Srivastava, Abhinav and Panda, A K and Mitra, A (2014) Damage evaluation of fossil fuelled power plant boiler tubes through magnetic Barkhausen technique. Engineering Failure Analysis, 44 (IF-1.130). pp. 195-201.

Roy, Rajat K and Dutta, Siuli and Panda, A K and Rajnikanth, V and Das, Swapan K and Mitra, A and Strangwood, M and Davis, C L (2018) Assessment of recovery and recrystallisation behaviours of cold rolled IF steel through non-destructive electromagnetic characterisation. Philosophical Magazine, 98 (1.632). pp. 1933-1944.

Roy, Rajat K and Ghosh, M and Panda, A K and Ghosh, R N and Mitra, A (2010) Development of rapidly solidified 6.5 wt% silicon steel for magnetic applications. Transactions of the Indian Institute of Metals, 63 (4). pp. 745-750.

Roy, Rajat K and Kar, Sujoy and Das, Karabi and Das, Siddhartha (2005) Microstructures and tensile properties of commercial purity aluminium alloy AA1235 under different annealing conditions. Materials Letters, 59 . pp. 2418-2422.

Roy, Rajat K and Kar, Sujoy and Das, Karabi and Das, Siddhartha (2006) A study of precipitation and recrystallization behaviour of aluminium alloy AA1235. A study of precipitation and recrystallization behaviour of aluminium alloy AA1235, 41 . pp. 1039-1045.

Roy, Rajat K and Kar, Sujoy and Das, Siddhartha (2009) Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011 alloy. Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011 alloy, 468 . pp. 122-129.

Roy, Rajat K and Kernion, Sam J and Shen, Shen and McHenry, Michael E (2011) Crystallization behavior and high temperature magnetic phase transitions of Nb-substituted FeCoSiBCu nanocompositesof. Applied Physics Letters, 99 . 192506-1-192506-3.

Roy, Rajat K and Murugaiyan, Premkumar and Bansal, G K and Krishna, K Gopala and Panda, Ashis K (2023) Structural and magnetic behaviors of Fe‑based glassy alloys prepared by industrial raw materials and different processing routes. Journal of Materials Science: Materials in Electronics, 34 (2.8). p. 2218.

Roy, Rajat K and Murugaiyan, Premkumar and V, Rajnikanth and Pundir, SPS and Sarkar, Subrata and Panda, Ashis K and Mitra, Amitava (2022) Magnetic Anisotropic Behaviour of CRGO Steels for Quality Assessment. Journal of Nondestructive Evaluation, 41 (2.588). p. 71.

Roy, Rajat K and Panda, A K and Das, Swapan K and Govind, and Mitra, A (2009) Development of a copper-based filler alloy for brazing stainless steels. Materials Science and Engineering A, 523 (1-2). pp. 312-315.

Roy, Rajat K and Panda, A K and Ghosh Chowdhury, S and Mitra, A and Ghosh, R N (2009) Effect of annealing treatment on soft magnetic properties of Fe–6.5 wt% Si wide ribbons. Journal of Magnetism and Magnetic Materials, 321 (18). pp. 2865-2870.

Roy, Rajat K and Panda, A K and Mitra, A (2013) Microstructure Evolution and Bonding Strength of Brazed Joint of Stainless Steel and Copper. Indian Welding Journal, 46(1) . pp. 1-5.

Roy, Rajat K and Panda, A K and Mitra, Amitava (2016) Effect of Co content on structure and magnetic behaviors of high induction Fe-based amorphous alloys. Journal Of Magnetism And Magnetic Materials, 418 (IF- 2.630). 236-241.

Roy, Rajat K and Panda, A K and Mitra, Amitava (2014) The joining behavior of structural steel assemblies of SS321 and 9Cr-1Mo by Cu based rapidly solidified filler alloy. Conference proceeding of ICONS 2014 . (Submitted)

Roy, Rajat K and Shen, Shen and Kernion, Sam J and McHenry, Michael E (2012) Effect of P addition on nanocrystallization and high temperature magnetic properties of low B and Nb containing FeCo nanocomposites. Journal of Applied Physics, 111 . 07A301-1.

Roy, Rajat K and Singh, Satnam and Gunjan, M K and Panda, A K and Mitra, A (2011) Joining of 304SS and pure copper by rapidly solidified Cu-based braze alloy. Fusion Engineering and Design, 86 . pp. 452-455.

Roy, S and Das, Avimanyu and Venkatesh, A S (2007) Characterisation of iron ore from the Jilling area of eastern India with a view to beneficiation. Iron Ore Conference 2007, Proceedings . pp. 179-186.

Roy, Sandip and Banerjee, T (1977) Current efficiencies of Ag-Zn alloys under potentiostatic conditions. Surface Technology, 5 (1). pp. 43-48.

Roy, Sandip and Banerjee, T (1975) Phase transformations in electrolytic silver-zinc alloys. Electrodeposition and Surface Treatment, 3 (5-6). pp. 289-305.

Roy, Subrata (2009) Recovery Improvement of Fine Iron Ore Particles by Multi Gravity Separation. The Open Mineral Processing Journal, 2 (14). pp. 17-30.

Roy, Subrata and Das, Avimanyu (2008) Characterization and processing of low-grade iron ore slime from the Jilling area of India. Mineral Processing and Extractive Metallurgy Review, 29 (3). pp. 213-231.

Roy, Subrata and Das, Avimanyu (2007) Feasibility of Producing Pellet Grade Concentrate by Beneficiation of Iron Ore Slime in India. Separation Science and Technology, 42 (14). pp. 3271-3287.

Roy, Subrata and Das, Avimanyu (2009) Nature of low-grade Indian iron ores and the prospects of their enrichment through gravity separation. Minerals & Metallurgical Processing, 26 (3). pp. 141-150.

Roy, Subrata and Das, Avimanyu (2013) Recovery of Valuables From Low Grade Iron Ore Slime and Reduction of Waste Volume by Physical Processing. Particulate Science and Technology: An International Journal, 31(3) (IF-). pp. 256-263.

Roy, Subrata and Das, Avimanyu and Venkatesh, A S (2008) A comparative mineralogical and geochemical characterisation of iron ores from two Indian Precambrian deposits and Krivoy rog deposit, Ukraine: implications for the upgrading of lean grade ore. Applied Earth Science : IMM Transactions section B, 117 (3). pp. 125-147.

Roy, Subrata and Mandal, S K and Das, Avimanyu (2012) Segregation and Process Features in a Teeter Bed Separator as Revealed by High Speed Videography and Image Processing. Mineral Processing and Extractive Metallurgy Review: An International Journal, 06 Aug 2012 .

Roy, Subrata and Mandal, S K and Das, Avimanyu (2014) Segregation and Process Features in a Teeter Bed Separator as Revealed by High-Speed Videography and Image Processing. Mineral Processing and Extractive Metallurgy Review, 35(1) (IF-0.690). pp. 15-22.

Roy, Subrata and Venkatesh, A S (2009) Banded Iron Formation to Blue Dust: mineralogical and geochemical constraints from the Precambrian Jilling-Langalata Deposits, Eastern Indian Craton. Applied Earth Science : IMM Transactions section B, 118 (3-4). pp. 178-188.

Roy, Subrata and Venkatesh, A S (2009) Mineralogy and geochemistry of banded iron formation and iron ores from eastern India with implications on their genesis. Journal of Earth System Science, 118 (6). pp. 619-641.

Roy, Subrata and Vidyadhar, A and Konar, J and Das, Avimanyu (2012) Metal Enrichment of Finely Ground Electronic Waste using Eddy Current Separation. Separation Science and Technology, 47 (12). pp. 1777-1784.

Rudrakshi, G B and Srivastava, V C and Ojha, S N (2007) Microstructural development in spray formed Al–3.5Cu–10Si–20Pb alloy and its comparative wear behaviour in different environmental conditions. Materials Science and Engineering A, 457 (1-2). pp. 100-108.

Rudrakshi, G B and Srivastava, V C and Pathak, J P and Ojha, S N (2004) Spray forming of Al–Si–Pb alloys and their wear characteristics. Materials Science and Engineering A, 383 . pp. 30-38.

Rudresh, M and Maruthi, B H (2019) Mechanical assisted modification of halloysite nano clay: expoxy composites. Journal of Metallurgy and Materials Science, 61(2) . pp. 83-93.

Runyoro, Joseph (2010) Effect of restrained hot spots and integrity of steel welded joints. Journal of Metallurgy and Materials Science, 52 (2). pp. 129-140.

Runyoro, Joseph (2010) The effect of tightening torque on anchor bolts embedded in concrete. Journal of Metallurgy and Materials Science, 52 (1). pp. 67-85.

Rupa, P K P and Chakraborti, P C and Mishra, Suman K (2009) Mechanical and deformation behaviour of titanium diboride thin films deposited by magnetron sputtering. Thin Solid Films, 517 (9). pp. 2912-2919.

Rupa, P K P and Chakraborti, P C and Mishra, Suman K (2014) Structure and indentation behavior of nanocomposite Ti–B–N films. Thin Solid Films, 564 (IF-1.867). pp. 160-169.

Rupa, P K P and Chakrborty, P C and Purnapu, Karuna and Mishra, Suman K (2011) Nanoindentation Studies of Hard Nanocomposite Ti-B-N Thin films. AIP Conference Proceedings, 1393 (3.596 (SCI)). pp. 239-240.

Sachdeva, S S and Mukherjee, J K and Banerjee, T (1973) Studies on high-temperature oxidation of Ni-Mn alloys. Indian Journal of Technology, 11 (11). pp. 613-616.

Sachdeva, S S and Mukherjee, J K and Banerjee, T (1973) Studies on manganese nickel system. NML Technical Journal, 15 (1). pp. 1-9.

Sah, Rakesh and Vidyadhar, A and Das, Avimanyu (2016) Study of cut point density and process performance of floatex density separator in fine coal cleaning. Particulate Science and Technology (IF-0.52). pp. 1-8.

Sah, Rakesh and Vidyadhar, A and Das, Avimanyu (2017) Study of cut point density and process performance of Floatex density separator in fine coal cleaning. Particulate Science and Technology, 35(2) (IF-0.784). pp. 239-246.

Saha, A K (1999) Chemical upgrading of deep-sea manganese nodules. NML Technical Journal, 40 (4). pp. 177-182.

Saha, A K (1998) Purification and enrichment of low grade molybdenite concentrates. NML Technical Journal, 40 (1). pp. 17-21.

Saha, A K (1996) Studies on thermal beneficiation of low grade rock phosphate. NML Technical Journal, 38 (1). pp. 37-41.

Saha, A K and Akerkar, D D (1987) Fuel oil reduction of polymetallic manganese sea nodules of Indian Ocean for extraction of nickel, copper and cobalt. NML Technical Journal, 29 (1-4). pp. 3-8.

Saha, A K and Khan, Z H (1995) Chemical beneficiation of low grade ferroginous bauxite. NML Technical Journal, 37 (3). pp. 83-87.

Saha, A K and Khan, Z H (1998) Production of ferrite grade iron oxide from iron ore fines. NML Technical Journal, 40 (4). pp. 131-136.

Saha, A K and Khan, Z H (1995) A study on preparation of cobalt powder from chloride solution. NML Technical Journal, 37 (2). pp. 53-60.

Saha, A K and Khan, Z H and Akerkar, D D (1992) Extraction of nickel from Indian low-grade siliceous ore. Transactions of the Institution of Mining and Metallurgy Section C - Mineral Processing and Extractive Metallurgy , 101 ( ). C52-C56.

Saha, A K and Khan, Z H and Akerkar, D D (1988) Recovery of cobalt from ammoniacal raffinate solution generated in processing of polymetallic sea nodules of Indian Ocean. NML Technical Journal, 30 (1-4). pp. 13-16.

Saha, A K and Khan, Z H and Akerkar, D D (1993) Reduction of Manganese sea nodules with noncoking coal. Transactions of the indian institute of metals, 46 (2). pp. 63-69.

Saha, A K and Khan, Z H and Akerkar, D D (1991) Studies on lignite reduction of manganese sea nodules for extraction of nickel, copper and cobalt. Transactions of the Indian Institute of Metals, 44 (2). pp. 131-137.

Saha, A K and Khan, Z H and Premchand, (1997) By-product recovery of nickel and cobalt from tungsten scrap. NML Technical Journal, 39 (4). pp. 203-207.

Saha, A K and Khan, Z H and Premchand, (1999) Reclamation of tungsten metal from tungsten alloy scrap. Transactions of the indian institute of metals, 52 (5). pp. 353-355.

Saha, A K and Khan, Z H and Premchand, (1997) Removal of silica and sulphur from wolframite concentrates. NML Technical Journal, 39 (1). pp. 15-21.

Saha, A K and Kumar, A and Akerkar, D D and Shahani, M J (1972) Production of iron powder from ferrous chloride by hydrogen reduction. NML Technical Journal, 14 (3). pp. 113-118.

Saha, A K and Kumar, A and Akerkar, D D and Shahani, M J (1971) Utilization of indigenous steel scrap for iron powder production-A study of dissolution rates of scrap in hydrocholoric acid. NML Technical Journal, 13 (4). pp. 93-99.

Saha, A K and Misra, R N and Bhatnagar, P P (1969) Studies on extraction of vanadium by fluo-solid salt roasting. NML Technical Journal, 11 (1). pp. 6-11.

Saha, A K and Misra, R N and Bhatnagar, P P (1970) Studies on leaching of bulk Ni-Cu-Mo sulphides. NML Technical Journal, 12 (3). pp. 69-73.

Saha, A K and Misra, R N and Bhatnagar, P P (1972) Studies on vapour phase deposition of chromium on graphite. NML Technical Journal, 14 (1). pp. 9-15.

Saha, A K and Shahani, M J and Altekar, V A (1977) Adsorption of cobalt by lignite. Hydrometallurgy, 2 (3). pp. 285-292.

Saha, A K and Srinivasan, S R and Akerkar, D D (1985) Acid treatment for purification and enrichment of low grade molybdenite concentrates. NML Technical Journal, 27 (3-4). pp. 46-55.

Saha, A K and Srinivasan, S R and Akerkar, D D (1977) Leachability of mosabani and malanjkhand copper ores by microorganisms - comparative-study. Transactions of the Indian Institute of metals, 30 (6). pp. 420-422.

Saha, A K and Srinivasan, S R and Akerkar, D D (1985) Removal of copper and nickel from low grade molybdenite concentrates. NML Technical Journal, 27 (3-4). pp. 40-45.

Saha, B and Vaidya, S S and Bhattacharjee, K and Bhagavatula, I and Prasad, V (2020) Weakly coupled metal-semiconductor plasmonic nanoparticles in solution. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 127-133.

Saha, D and Chakravarty, S and Shome, D and Basariya, M R and Kumari, A and Kundu, AK and Chaterjee, D and Adhikari, J and Chaterjee, D (2016) Distribution and affinity of trace elements in Samaleswari coal, Eastern India. Fuel, 181 (IF-4.601). 376-388.

Saha, D and Chatterjee, D and Chakravarty, S and Mazumder, S (2018) Trace element geochemistry and mineralogy of coal from Samaleswari open cast coal block (S-OCB), Eastern India. Physics and Chemistry of the Earth, 104 (IF-1.426). pp. 47-57.

Saha, D and Chatterjee, D and Chakravarty, S and Roychowdhury, T (2019) Investigation of Environmental-Concern Trace Elements in Coal and Their Combustion Residues from Thermal Power Plants in Eastern India. Natural Resources Research, 28(4) . pp. 1505-1520.

Saha, Debdulal and Das, Santanu and Sengupta, Kamalendu (2008) Development of commercial nanoporous trace moisture sensor following sol–gel thin film technique. Sensors and Actuators B: Chemical, 128 (2). pp. 383-387.

Saha, Jayant K and Mitra, P K and Paul, S and Singh, D D N (2010) Performance of different organic coatings on steel substrate by accelerated and in atmospheric exposure tests. Indian Journal of Chemical Technology, 17 (2). pp. 102-110.

Saha, S and Ghosh, M and Pramanick, A K and Mondal, C and Maity, J (2021) Attainment of high specific hardness and specific modulus in spark plasma sintered aluminium-copper-silicon carbide-titanium carbide hybrid compositeHohe spezifische Harte und spezifisches Schubmodul von einem sparkplasmagesinterten Aluminium-Kupfer-Siliziumkarbid-Titankarbid-Verbundwerkstoff. Materialwissenschaft und Werkstofftechnik, 52(9) . pp. 965-981.

Saha, S and Ghosh , M and Pramanick, A K and Mondal, C and Maity, J (2021) Microstructure and Mechanical Properties of Al/Cu-p/SiCp/TiCp-Based Hybrid Composites Fabricated by Spark Plasma Sintering. Journal of materials engineering and performance .

Sahay, S K (2008) Spinodal decomposition in Co-3 Ti(wt.%) alloy. Spinodal decomposition in Co-3 Ti (wt. %) alloy, 50 (1). pp. 33-43.

Sahay, S K and Goswami, B and Kumar, S B and Ray, Ashok K (2007) Fatigue behaviour in titanium-based alloys. Journal of Metallurgy and Materials Science, 49 (2). pp. 97-122.

Sahay, S K and Goswami, B and Ray, Ashok K (2007) Development of cobalt-base alloys for high temperature applications. Journal of Metallurgy and Materials Science, 48 (1). pp. 1-38.

Sahay, S K and Kumar, S B and Goswami, B and Ray, Ashok K (2007) Recent developments in tungsten carbide-cobalt base cemented carbides. Journal of Metallurgy and Materials Science, 49 (3). pp. 143-173.

Sahay, S K and Singh, S K and Goswami, B and Kumar, S B and Ray, Ashok K (2007) Recent development in cobalt-base metallic glasses. Journal of Metallurgy and Materials Science, 48 (2). pp. 59-96.

Sahay, S K and Singh, S K and Goswami, B and Ray, A K (2006) Perspectives of innovation scenarios in Titanium base alloys - A review. Journal of Metallurgy and Materials Science, 48 (4). pp. 181-204.

Sahay, S K and Singh, S K and Goswami, B and Ray, Ashok K (2004) Creep behaviour in Ti-based alloys. High Temperature Materials and Processes, 24 (5). pp. 323-336.

Sahay, S K and Singh, S K and Goswami, B and Ray, Ashok K (2006) Studies of oxidation behavior in Ti-base alloys. Corrosion Reviews , 24 (5). pp. 353-394.

Sahay, S K and Singh, S K and Goswami, B and Ray, Ashok K (2005) Studies of phase transformations in Ti-Al-X alloys. HIGH TEMPERATURE MATERIALS AND PROCESSES , 24 (6). pp. 345-358.

Sahay, S K and Singh, S K and Kumar, S B and Goswami, B and Ray, A K (2006) Recent developments in cobalt base alloys. Journal of Metallurgy and Materials Science, 48 (3). pp. 129-166.

Sahoo, Biraj K and Deva, Anjana and Pandey, Pratiksha and Meena, L K and Ghosh Chowdhury, S and Jha, Bimal Kumar (2020) Microstructure–Property Correlation in High-Strength Formable Steel with Varying Nb-Si Content. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 1901-1908.

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chhabra, H S and Chowdhury, S G (2021) Evolution of microstructure and deformation behavior in Al–Ni added medium-Mn steel processed through intercritical / cold rolling and annealing. Materials Science and Engineering A, 824 .

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chowdhury, S G (2022) Enhancing the properties of Al-Ni added medium Mn steel by tailoring B2-NiAl precipitates through aging treatment. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 837 .

Sahoo, Biraj K and Srivastava, V C and Mahato, B and Ghosh Chowdhury, S (2021) Microstructure-mechanical property evaluation and deformation mechanism in Al added medium Mn steel processed through intercritical rolling and annealing. Materials Science and Engineering A, 799 (IF-). p. 140100.

Sahoo, Biraj K and Tripathy, S and Ghosh, M and Das, Swapan K and Das, Goutam (2019) Investigation of Premature Failure of a Coal-Fired Boiler Superheater Tube. Journal of Failure Analysis and Prevention, 19(3) . pp. 792-801.

Sahoo, Biraj K and Walunj, M G and Srivastava, V C and Pais, R and Pathak, L C and Mandal, G K (2024) Elimination of Wettability Issues in Interstitial Free High Strength (IFHS) Steel by Controlling the Annealing Atmosphere. Transactions of The Indian Institute of Metals .

Sahoo, Gadadhar and Kumar, Vinod and Singh, Balbir and Sexena, Atul (2016) Hot ductility study on high P and Cu containing low alloy steel. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 153-158.

Sahoo, K L (1994) Improvement of steel shots and its service life assessment in foundry operation. Indian Foundry Journal, 40 . pp. 3-5.

Sahoo, K L and Das, S K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al–Fe–V–Si alloys. Materials Science and Engineering A, 355 (1-2). pp. 193-200.

Sahoo, K L and Das, Samar and Murty, B S (2004) Formation of quasicrystalline related intermetallic compounds in conventionally cast Al-Fe-V-Si alloy. Journal of Non-Crystalline Solids, 334 . pp. 29-32.

Sahoo, K L and Das, Swapan K (2003) Effect of magnesium on sliding wear performance of cast Al-8.3Fe-0.8V-0.9Si alloys. Materials Science and Technology, 19 (7). pp. 959-965.

Sahoo, K L and Das, Swapan K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al-Fe-V-Si alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 355 (1-2). pp. 193-200.

Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2012) Metallurgical heritage of India : Preservation and rejuvenation. Science and Culture . pp. 532-536.

Sahoo, K L and Mitra, A and Ghosh, S (2005) Effect of rare-earth Elements on Nanophase Evolution, Crystallization Behaviour and Mechanical Properties in Al-Ni-R (R = La/Mischmetal) Amorphous Alloys. Pramana - journal of physics, 65 (4). pp. 745-751.

Sahoo, K L and Panda, A K and Das, S and Rao, Venkatesh (2004) Crystallization study of amorphous Al87.5Ni7Mm5Fe0.5 alloy by electrical resistivity measurement. Materials Letters, 58 (3-4). pp. 316-320.

Sahoo, K L and Pathak, B N (2009) Solidification behaviour, microstructure and mechanical properties of high Fe-containing Al–Si–V alloys. Journal of Materials Processing Technology, 209 (2). pp. 798-804.

Sahoo, K L and Poddar, Palash (2017) Studies on Magnesium Alloys–Properties and Potential for Automotive and Aerospace Applications. Transaction of 65th Indian foundry Congress 2017 . pp. 151-156.

Sahoo, K L and Poddar, Palash and Das, Goutam and Ravi Kumar, B (2007) Crystallization behaviour and mechanical properties of rapidly solidified Al87.5Ni7Mm5Fe0.5 amorphous alloy. Journal of Materials Science, 42 (16). pp. 6665-6671.

Sahoo, K L and Poddar, Palash and Kumar, Randhir and Pushp, P T (2009) Strain induced melt activation — an effective route to produce high performance alloy plates and sheets. Transactions of the Indian Institute of Metals, 62 (4-5). pp. 275-278.

Sahoo, K L and Rao, Venkatesh and Mitra, A (2003) Crystallization kinetics in an amorphous Al-Ni-Mm-Fe alloy. Materials Transactions , 44 (6). pp. 1075-1080.

Sahoo, K L and Sahu, Rina (2013) Glass transition and crystallization of Al–Ni–La based metallic glasses studied by temperature modulated DSC. Journal of Non-Crystalline Solids, 365 (IF-1.597). pp. 33-36.

Sahoo, K L and Sahu, Rina and Ghosh, M and Chatterjee, S (2008) Studies on crystallization behaviour and mechanical properties of Al-Ni-La metallic glasses. Bulletin of Materials Science, 31 (3). pp. 433-439.

Sahoo, K L and Sahu, Rina and Mitra, A (2007) Kinetic aspects of the nanocrystallization and evolution of microhardness in Al92-XNi8LaX amorphous alloys. Materials and Manufacturing Processes, 22 (4). pp. 497-501.

Sahoo, K L and Sivaramakrishnan, C S (2003) Some studies on Al–8.3Fe–0.8V–0.9Si alloy for near net shape casting. Journal of Materials Processing Technology, 135 (2-3). pp. 253-257.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2001) The effect of Mg treatment on the properties of Al–8.3Fe–0.8V–0.9Si alloy. Journal of Materials Processing Technology, 112 (1). pp. 6-11.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2000) Modification of cast structure in Al-8 center dot 3Fe-0 center dot 8V-0 center dot 9Si alloy by magnesium treatment. Materials Science and Technology, 16 (2). pp. 227-230.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2000) Solidification characteristics of the Al-8.3Fe-0.8V-0.9Si alloy. Metallurgical and Materials Transactions A, 31 (6). pp. 1599-1610.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2000) Studies on wear characteristics of Al–Fe–V–Si alloys. Wear, 239 (2). pp. 211-218.

Sahoo, K L and Stone, I C (2005) Effect of Si on the formation and stability of the icosahedral quasicrystalline phase in Al-Fe-Cr-Ti alloys. Philosophical Magazine Letters Online ISSN 1362-3036, 85 (5). pp. 231-245.

Sahoo, K L and Wollgarten, M and Banhart, J (2007) Effect of solidification rate and composition on microstructure and crystallization in Al-Ni-La metallic glasses. Transaction of Indian Institute of Metals, 60 (2). pp. 349-354.

Sahoo, K L and Wollgarten, M and Haug, J and Banhart, J (2005) Effect of La on the crystallization behaviour of amorphous Al94 − xNi6Lax (x = 4–7) alloys. Acta Materialia, 53 (14). pp. 3861-3870.

Sahoo, K L and Wollgarten, M and Kim, K B and Banhart, J (2005) Crystallization behavior and microhardness evolution in Al92-xNi8Lax amorphous alloys. Journal of Materials Research, 20 (11). pp. 2927-2933.

Sahoo, M and Bhowmik, Tishrota and Mishra, V and Pal, S and Sharma, Mamta and Chakravarty, S (2019) Significance of coal quality on thermoplastic properties: a case study. International Journal of Coal Preparation and Utilization .

Sahoo, M and Dey, Shobhana (2021) A comparative study on the characterisation and combustion behaviour of high ash coals from two different geographical origins. Fuel, 286(2) (IF-5.578).

Sahoo, S K and Tripathy, S K and Nayak, A and Hembrom, K C and Dey, S and Rath, R K and Mohanta, M K (2022) Beneficiation of lithium bearing pegmatite rock: a review. Mineral Processing and Extractive Metallurgy Review .

Sahoo, Saroj and Tripathy, Sunil and Nayak, A. and Hembrom, K. C. and Dey, S. and Rath, R.K and Mohanta, M. K. (2022) Beneficiation of lithium bearing pegmatite rock: a review. Mineral Processing and Extractive Metallurgy Review .

Sahoo, T and Thakur, D and Panda, A B and Ghosh, S C (2021) Copper/manganese oxide catalyzed regioselective amination of quinoline N-oxides: An example of synergistic cooperative catalysis. Tetrahedron Letters, 83 .

Sahota, N S and Gupta, K N and Ram, Mohan (1987) Kinetics and mechanism of reoxidation behavior of solid reductant based direct reduced iron. Transactions of the Indian Institute of metals, 40 (5). pp. 415-422.

Sahu, A K and Goswami, N G (2010) Digital Repository of National Metallurgical Laboratory (CSIR),India. SPARC Open Access Newsletter, 151 (ISSN 1546-7821).

Sahu, A K and Goswami, N G (2010) Eprints@NML: Digital Repository of National Metallurgical Laboratory (CSIR),India. Open Access and Institutional Repositories with EPrints . pp. 1-4.

Sahu, A K and Goswami, N G (2015) Institutional Repository: Prospect and its global impact. VSRD International Journal of Technical & Non-Technical Research, Vol. VI Special Issue May 2015, 6 (UIF-0.7145 & SJIF-2.608). pp. 143-148.

Sahu, A K and Goswami, N G and Choudhury, B K (2014) Information Needs of Library Users of Selective Metallurgical Institutions in Jharkhand. DESIDOC Journal of Library & Information Technology, 34(1) (IF-0.645). pp. 3-10.

Sahu, A K and Goswami, N G and Choudhury, B K (2014) Information Needs of Scientists and Engineers: A Case Study of Government, Public and Private Sector RDLICs Relating to Metallurgy & Materials Science. SRELS Journal of Information Management, 51(1) . pp. 39-50.

Sahu, A K and Goswami, N G and Choudhury, B K (2013) Institutional Repository of CSIR-NML and the global information seeker. Annals of Library and Information Studies, 60 . pp. 36-40.

Sahu, A K and Goswami, N G and Choudhury, B K (2011) Research publications of National Metallurgical Laboratory during the year 2001- 2010 - A study on citation patterns. Annals of library and Information Studies, 58 (2). pp. 151-160.

Sahu, A Kumar and Panda, P K (2005) Ceramic coatings on metals prepared by sol-gel technique for corrosion resistance study. Journal of Metallurgy and Materials Science, 47 (1). pp. 25-29.

Sahu, J K and Das, D K and Nandy, T K and Mandal, D and Rajnikanth, V and Swaminathan, J and Ray, Ashok K (2011) Effect of titanium aluminide coating on cyclic plastic deformation and fatigue life of a titanium alloy at 600 °C. Materials Science and Engineering A, 530 . pp. 664-668.

Sahu, J K and Ghosh, R N and Christ, H J (2009) Low cycle fatigue behaviour of duplex stainless steel: influence of isothermal aging treatment. Fatigue & Fracture of Engineering Materials & Structures, 33 (2). pp. 77-86.

Sahu, J K and Gupta, R K and Swaminathan, J and Paulose, N and Mannan, S L (2013) Influence of hot Corrosion on Low Cycle fatigue behavior of Nickel base Superalloy SU 263. International Journal of Fatigue, 51 (IF-1.976). pp. 68-73.

Sahu, J K and Krupp, U and Christ, H J (2012) Fatigue crack initiation behavior in embrittled austenitic–ferritic stainless steel. International Journal of Fatigue, 45 . pp. 8-14.

Sahu, J K and Krupp, U and Ghosh, R N and Christ, H J (2009) Effect of 475 °C embrittlement on the mechanical properties of duplex stainless steel. Materials Science and Engineering: A, 508 (1-2). pp. 1-14.

Sahu, J K and Ravi Kumar, B and Das, S K and Paulose, N and Mannan, S L (2015) Isothermal high temperature low cycle fatigue behavior of Nimonic-263: Influence of type I and type II hot corrosion. Materials Science and Engineering A, 622 (IF-2.409). pp. 131-138.

Sahu, J K and Sahu, K K and Ray, A K (2012) The influence of high-temperature oxidation resistant titanium aluminide coating on low-cycle fatigue behaviour of titanium alloy IMI 834 at 600 C. Institute of Mechanical Engineers, 226 . pp. 35-41.

Sahu, J K and Sahu, K K and Ray, Ashok K (2011) The influence of high-temperature oxidation resistant titanium aluminide coating on low-cycle fatigue behaviour of titanium alloy IMI 834 at 600°C. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, October 31, 2011 1464420711425133, 226 (L1). pp. 34-41.

Sahu, K K and Agrawal, A (2008) Environmental friendly recycling of electronic waste – A challenge before developing nations. Journal of Metallurgy and Materials Science, 50 (2). pp. 107-118.

Sahu, K K and Agrawal, A and Mishra, D (2013) Hazardous waste to materials : Recovery of molybdenum and vanadium from acidic leach liquor of spent hydroprocessing catalyst using alamine 308. Journal of Environmental Management, 125 (IF-3.057). pp. 68-73.

Sahu, K K and Agrawal, A and Pandey, B D (2005) Nickel recovery from spent nickel catalyst. Waste Management & Research, 23 (2). pp. 148-154.

Sahu, K K and Agrawal, A and Pandey, B D (2004) Recent trends and current practices for secondary processing of zinc and lead. Part II: zinc recovery from secondary sources. Waste Management & Research, 22 (4). pp. 248-254.

Sahu, K K and Alex, T C and Mishra, D and Agrawal, A (2006) An overview on the production of pigment grade titania from titania-rich slag. Waste Management & Research, 24 (1). pp. 74-79.

Sahu, K K and Das, R P (2000) Mixed solvent systems for the extraction and stripping of iron(III) from concentrated acid chloride solutions. Metallurgical and Materials Transactions B, 31 (6). pp. 1169-1174.

Sahu, K K and Mishra, D and Ghosh, S and Jana, R K and Agrawal, A (2009) Selective dissolution of chalcopyrite in chloride media. Journal of Metallurgy and Materials Science, 51 (3). pp. 215-233.

Sahu, K K and Mishra, D and Jha, Manis K and Agrawal, A (2012) Processing of secondaries and wastes for metal extraction. Science and culture, 78 . pp. 504-510.

Sahu, L and Bhattacharya, S and Dey, S (2019) Release analysis of coal fines: Evolution of the methodology and critical issues involved. Journal of the Southern African Institute of Mining and Metallurgy, 119(6) . pp. 595-606.

Sahu, L and Bhattacharya, S and Dey, Shobhana (2021) Effect of reagents on flotation kinetics of differently sized feeds. International Journal of Coal Preparation and Utilization .

Sahu, L and Bhattacharya, S and Dey, Shobhana (2020) The use of release analysis to show the selectivity of reagents towards differently sized feeds of the same coal. International Journal of Coal Preparation and Utilization, Online (IF-2.034).

Sahu, L and Dey, Shobhana (2017) Enrichment of carbon recovery of high ash coal fines using air fluidized vibratory deck separator. International Journal of Coal Science & Technology, 4(3) . 262-273.

Sahu, M and Ghosh, A and Kumar, J and Singh, S N and Sagar, S P (2023) Probability Analysis in Predicting Creep Life of Power Plant Material Using High Power Ultrasound. Journal of Materials Engineering and Performance .

Sahu, M and Ghosh, Arpita and Singh, S. N. and Sagar, Sarmishtha Palit (2022) Weibull parameter based probability distribution for predicting creep life of power plant materials: A non-destructive approach. Materials Today: Proceedings .

Sahu, M and Ghosh, Arpita and Kumar, J and Singh, S. N. and Sagar, Sarmishtha (2023) Probability Analysis in Predicting Creep Life of Power Plant Material Using High Power Ultrasound. Journal of Materials Engineering and Performance . (In Press)

Sahu, M K and Dutta, Chandan and Ghosh, Arpita and Palit Sagar, S (2019) A Digital Image Processing Tool for Size and Number Density Distribution of Precipitates in Creep-Exposed Material. Soft Computing for Problem Solving . pp. 653-659.

Sahu, M K and Palit Sagar, S (2021) Nonlinearity in the propagation of acoustic waves: Simulation and experimental validation in a creep damaged material. Materials Today, 44, Part 1 . pp. 2251-2256.

Sahu, M K and Swaminathan, J and Bandyopadhyay, N R and Sagar, S P (2017) Effect of Precipitation Morphology on the Second Harmonic Generation of Ultrasonic Wave During Tempering in P92 Steel. Journal of The Institution of Engineers (India): Series D, 98(2) . pp. 211-217.

Sahu, M K and Swaminathan, J and Bandyopadhyay, N R and Sagar, S P (2017) Rayleigh Surface wave based non linear ultrasound to assess effect of precipitation hardening during tempering in P92 steel. Materials Science and Engineering: A, 703 (IF- 3.094). pp. 76-84.

Sahu, Nilimadhaba and Biswas, A and Kapure, Gajanan and Randhawa, N S (2019) Thermochemical analysis of smelting of ferruginous manganese ore for silicomanganese production. Calphad, 66 (IF-2.652). p. 101637.

Sahu, Puspendu and Curtze, Sven and Das, Arpan and Mahato, B and Kuokkala, Veli Tapani and Ghosh Chowdhury, S (2010) Stability of austenite and quasi-adiabatic heating during high-strain-rate deformation of twinning-induced plasticity steels. Scripta Materialia, 62 (1). pp. 5-8.

Sahu, Puspendu and Hamada, A S and Ghosh, R N and Karjalainen, L P (2007) X-ray Diffraction Study on Cooling-Rate-Induced γfcc→εhcp Martensitic Transformation in Cast-Homogenized Fe-26Mn-0.14C Austenitic Steel. Metallurgical and Materials Transactions A, 38 (9). pp. 1991-2000.

Sahu, Puspendu and Hamada, A S and Ghosh Chowdhury, S and Karjalainen, L P (2007) Structure and microstructure evolution during martensitic transformation in wrought Fe-26Mn-0.14C austenitic steel: an effect of cooling rate. Journal Of Applied Crystallography, 40 (2). pp. 354-361.

Sahu, Puspendu and Shee, S K and Hamada, A S and Rovatti, L and Sahu, T and Mahato, B and Ghosh Chowdhury, S and Porter, D A and Karjalainen, L P (2012) Low strain rate deformation behavior of a Cr-Mn austenitic steel at -80oC. Acta Materialia, 60(2012) . pp. 6907-6919.

Sahu, Ranjan K (2006) Effect of Mo doping on magnetic and transport properties of La0.5Sr0.5CoO3. Journal of Magnetism and Magnetic Materials, 305 (1). pp. 47-52.

Sahu, Ranjan K (2020) Some notable experiments of graphene. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 147-153.

Sahu, Ranjan K and Ganguly, Koustav and Mishra, T and Mishra, M and Ningthoujam, R S and Roy, S K and Pathak, L C (2012) Stabilization of intrinsic defects at high temperatures in ZnO nanoparticles by Ag modification. Journal of Colloid and Interface Science, 366 (1). pp. 8-15.

Sahu, Ranjan K and Krishnan, P S R and Das, A and Shinde, A B and Ramanasham, M (2006) Ru-induced spin rotation in La1.2Sr1.8Mn1.9Ru0.1O7 bilayered manganite. Journal of Magnetism and Magnetic Materials, 297 (2). pp. 84-87.

Sahu, Ranjan K and Kumar, Sunil and Mandal , D and Das Chakraborty, S and Bhattacharya, P and Mishra, T (2021) Dangling Bond-Induced Surface Depletion in CdS Leaf. ACS Applied Electronic Materials, 3(7) . pp. 2977-2987.

Sahu, Ranjan K and Mohanta, Ojaswini and Pramanick, A K (2012) XPS study on the correlation of magnetic properties and site occupancy of Al doped SrFe12O19. Journal of Alloys and Compounds, 532 . pp. 114-120.

Sahu, Ranjan K and Pandey, S K and Pathak, L C (2011) Valence and origin of metal-insulator transition in Mn doped SrRuO3 studied by electrical transport, X-ray photoelectron spectroscopy and LSDA plus U calculation. Journal of Solid State Chemistry, 184 (3). pp. 523-530.

Sahu, Ranjan K and Ray, Ajoy K and Mishra, T and Pathak, L C (2008) Microwave-Assisted Synthesis of Magnetic Ni Wire from a Metal−Organic Precursor Containing Ni(II) and Triethanolamine. Crystal Growth & Design, 8 (10). pp. 3754-3760.

Sahu, Ranjan K and Ray, Ashok K and Das, Swapan K and Kailath, A J and Pathak, L C (2006) Microwave-assisted combustion synthesis of Ni powder using urea. Journal of Materials Research, 21 (7). pp. 1664-1673.

Sahu, Ranjan K and Roy, Ajoy K and Manotiaran, S S and Arora, S and Mishra, T and Lim, S -H and Salamanca-Riba, L G and Kundaliya, D C and Panda, A K and Mitra, A and Pathak, L C (2008) Single step synthesis of Ni wire, sponge and flower, and their magnetic properties. Magnetic Materials Book Series: Aip Conference Proceedings, 1003 . pp. 100-102.

Sahu, Rina and Chatterjee, S and Sahoo, K L (2010) Mechanical Properties and Nanocrystallization Behavior of Al-Ni-La Alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41 (4). pp. 861-869.

Sahu, Rina and Gangopadhyay, A K and Kelton, K F and Chatterjee, S and Sahoo, K L (2009) Room temperature ageing of Al–Ni–RE (RE = La, Gd, Er) metallic glasses. Scripta Materialia, 61 (6). pp. 588-591.

Sahu, Rina and Kailath, A J and Chatterjee, S and Sahoo, K L (2009) Effect of La content on the room temperature ageing behavior of Al90-xNi6La4+x (x = 0 to 3) metallic glasses. Materials Science and Engineering A, 527 (6). pp. 1339-1342.

Sahu, Rina and Kailath, A J and Chatterjee, S and Sahoo, K L (2010) Effect of La content on the room temperature ageing behavior of Al90−xNi6La4+x (x = 0–3) metallic glasses. Materials Science and Engineering: A, 527 (6). pp. 1339-1342.

Sahu, S C and Samantara, A K and Dash, A and Juluri, R R and Sahu, Ranjan K and Mishra, B K and Jena, B K (2013) Graphene-induced Pd nanodendrites: A high performance hybrid nanoelectrocatalyst. Nano Research, 6/9 . pp. 635-643.

Sahu, S K and Agrawal, A and Pandey, B D and Kumar, Vinay (2004) Recovery of copper, nickel and cobalt from the leach liquor of a sulphide concentrate by solvent extraction. Minerals Engineering, 17 (7-8). pp. 949-951.

Sahu, S K and Asselin, E (2011) Characterization of residue generated during medium temperature leaching of chalcopyrite concentrate under CESL conditions. Hydrometallurgy, 110 (1-4). pp. 107-114.

Sahu, S K and Asselin, E (2012) Effect of oxidizing agents on the hydrometallurgical purification of metallurgical grade silicon. Hydrometallurgy, 121-124 . pp. 120-125.

Sahu, S K and Chakravortty, V (1998) Extraction of uranium(VI) with binary mixtures of a quadridentate Schiff base and various neutral donors. Journal of Radioanalytical and Nuclear Chemistry, 227 (1-2). pp. 163-165.

Sahu, S K and Chakravortty, V and Reddy, M L P and Ramamohan, T R (2000) The synergistic extraction of thorium(IV) and uranium(VI) with mixtures of 3-phenyl-4-benzoyl-5-isoxazolone and crown ethers. Talanta, 51 . pp. 523-530.

Sahu, S K and Chakravortty, V and Reddy, M L P and Ramamohan, T R (1999) Synergistic Extraction of Trivalent Lanthanoids with 3-Phenyl-4-benzoyl-5-isoxazolone and Various Sulphoxides. Radiochimica Acta, 85 . pp. 107-111.

Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2009) Removal of chromium(III) by cation exchange resin, Indion 790 for tannery waste treatment. Hydrometallurgy, 99 (3-4). pp. 170-174.

Sahu, S K and Mishra, Amaresh and Behera, R K (1996) Synthesis of thiazole, benzothiazole, oxadiazole, thiadiazole, triazole and thiazolidinone incorporated coumarins. Indian Journal of Heterocyclic Chemistry . pp. 91-94.

Sahu, S K and Razi, M K and Beuscher, M and Chagnes, A (2020) Recovery of Metal Values from Ni-Cd Cake Waste Residue of an Iranian Zinc Plant by Hydrometallurgical Route. Metals, 10(5) . p. 655.

Sahu, S K and Reddy, M L P and Ramamohan, T R and Chakravortty, V (2000) Solvent extraction of uranium(VI) and thorium(IV)from nitrate media by Cyanex 923. Radiochimica Acta, 88 . pp. 33-37.

Sahu, S K and Sahu, K K and Pandey, B D (2006) Leaching of zinc sulfide concentrate from the ganesh-himal deposit of nepal. Metallurgical and Materials Transactions B, 37 (4). pp. 541-549.

Sahu, S K and Verma, V K and Bagchi, D and Kumar, Vinay and Pandey, B D (2008) Recovery of chromium(VI) from electroplating effluent by solvent extraction with tri-n-butyl phosphate. Indian Journal Of Chemical Technology, 15 (4). pp. 397-402.

Sahu, Sangeeta (2012) Synthesis of Dodecaaza-Tetra-chloro-tricyclodotri- acontane macro cyclic complexes of (Cu ++ ) transition metal ions present in pulp and paper mill effluents. Journal of Metallurgy and Materials Science, 54(2) . pp. 125-130.

Sahu, V K and Tripathy, S and Chowdhury, S G and Mandal, G K (2023) On the Unified Interaction Parameter Formalism and Its Application in Critical Reassessment of Pearlitic Transformation in Fe-C-Mn System. Metallurgical and Materials Transactions A -Physical Metallurgy and Materials Science . pp. 3157-3185.

Sai Kumar, M and K, Rashid Sulthan and Vasumathi, N and Kumari, Ajita and Vijaya Kumar, T V (2023) Flotation of Low-Grade Graphite Ore Using Collector Derived from Low-Density Polyethylene Waste. Sustainable Chemical, Mineral and Material Processing:Lecture Notes in Mechanical Engineering, .

Saida, S and Chakravarty, S and Sahu, Rina and Das Biswas, Rupa and Chakravarty, K (2020) Laboratory-Scale Tests for the Utilization of High Ash Non-Coking coal in Coke-Making Process. Transactions of the Indian institute of metals, 73(5) (IF-1.205). pp. 1257-1263.

Saikia, Niharika and Khare, Puja and Dutta, M N and Baruah, B P (2010) Petrographic studies of Nagaland coals. Proceedings of the XI International Seminar on Mineral Processing, I . pp. 69-74.

Saini, P K and Ahliwat, D S and Singh, D (2017) Study of electronic structure and optical properties of zinc-blende and rocksalt structures of HgSe : A DFT study. Journal of Metallurgy and Materials Science, 59(1) . pp. 29-37.

Saleem, Sheikh shahid and Nigam, S P (2005) Noise prediction model for Indian traffic conditions using L10 approach. Journal of Metallurgy and Materials Science, 47 (2). pp. 91-101.

Saleem, Sheikh shahid and Nigam, S P (2003) Regression analysis for selection of a noise descriptor to accurately predict traffic noise on Indian highways. Journal of Metallurgy and Materials Science, 45 (3). pp. 127-135.

Samal, S and Mukherjee, P S and Ray, Ajoy K (2010) Comparative Study on Energy Consumption and Yield by Various Thermal Plasma Routes for Production of Titania slag. Plasma Chemistry and Plasma Processing, 30 (3). pp. 413-428.

Samal, S and Ray, Ajoy K and Bandopadhyay, A (2013) Proposal for resources, utilization and processes of red mud in India - A review. International Journal of Mineral Processing, 118 (IF-1.378). pp. 43-45.

Samanta, Salkat and Goswami, M C and Baidya, T K and Mukherjee, S and Dey, R (2013) Mineralogy and carbothermal reduction behaviour of vanadium-bearing titaniferous magnetite ore in Eastern India. International Journal of Minerals Metallurgy and Materials, 20(10) (IF-0.483). pp. 917-924.

Samanta, Shipra and Misra, R N and Bhatnagar, P P (1968) Studies on the extraction of nickel from the nickeliferous laterites of Badampahar area, Orissa. NML Technical Journal, 10 (2). pp. 15-18.

Samanta, Shipra and Misra, R N and Bhatnagar, P P (1965) Thermal beneficiation of low-grade chrome ore from Vagda deposits, Ratnagiri District, Maharashtra. NML Technical Journal, 7 (4). pp. 13-16.

Samantaray, S K and Mishra, T and Parida, K M (2000) Studies on anion promoted Titania 2: Preparation, characterisation and catalytic activity towards aromatic alkylation over sulfated titania. Journal of Molecular Catalysis A: Chemical , 156 . pp. 267-274.

Samata, Sipra and Misra, R N and Bhatnagar, P P (1964) Thermal beneficiation of low grade chrome ore from Enuconda deposits, West Godavari District, Andhra. NML Technical Journal, 6 (4). pp. 12-16.

Sambamurthy, E and Dutta, Siuli and Panda, A K and Mitra, A and Roy, Rajat K (2014) Evaluation of post-weld heat treatment behavior in modified 9Cre1Mo steel weldment by magnetic Barkhausen emission. International Journal of Pressure Vessels and Piping, 123-124 (IF-1.078). pp. 86-91.

Sameer, Kumar D and Suman, K N S and Poddar, Palash (2017) Effect of particle morphology of Ni on the mechanical behavior of AZ91E-Ni coated nano Al2O3 composites. Materials Research Express, 4(6) (IF-1.068).

Sameer, Kumar D and Suman, K N S and Sasanka, Tara C and Ravindra, K and Poddar, Palash and Venkata , Siva S B (2017) Microstructure, mechanical response and fractography of AZ91E/Al2O3 (p) nano composite fabricated by semi solid stir casting method. Journal of Magnesium and Alloys, 5(1) (IF- ). pp. 48-55.

Sampath, J R (1972) Fifty years of development of copper extraction. NML Technical Journal, 14 (2). pp. 44-46.

Sampath, V S and Basak, G and Bhatnagar, P P (1967) Removal of oxide coating from magnesium powder. NML Technical Journal, 9 (2). pp. 18-19.

Sampath, V S and Bhatnagar, P P (1961) Production of low carbon ferro-chrome from high carbon ferro-chrome. NML Technical Journal, 3 (2). pp. 19-27.

Sankar, M and Batra, N K and Shekhar, R and Mehrotra, S P (2006) Roasting, reduction and leaching of an Indian ilmenite ore for producing synthetic rutile. Transactions Of The Indian Institute Of Metals , 59 (3). pp. 381-387.

Sankar, T K and Abhilash, and Meshram, Pratima (2023) Environmental Impact Assessment in the Entire Life Cycle of Lithium-Ion Batteries. Reviews of Environmental Contamination and Toxicology, 262(1) .

Sankar, Tapan Kumar and Abhilash, and Meshram, Pratima (2024) Environmental Impact Assessment in the Entire Life Cycle of Lithium‑Ion Batteries. Reviews of environmental contamination and toxicology, 262 (5) (6.9).

Sankara Narayanan, T S N (2005) Surface pretreatment by phosphate conversion coatings - A review. Reviews on Advanced Materials Science, 9 (2). pp. 130-177.

Sankara Narayanan, T S N (2005) Surface pretretament by phosphate conversion coatings - A review. Reviews in Advanced Materials Science, 9 . pp. 130-177.

Sankara Narayanan, T S N and Baskaran, Irusen and Krishnaveni, K and Parthiban, S (2006) Deposition of electroless Ni–P graded coatings and evaluation of their corrosion resistance. Surface and Coatings Technology, 200 (11). pp. 3438-3445.

Sankara Narayanan, T S N and Jegannathan, S and Ravichandran, K (2006) Corrosion resistance of phosphate coatings obtained by cathodic electrochemical treatment: Role of anode–graphite versus steel. Progress in Organic Coatings, 55 (4). pp. 355-362.

Sankara Narayanan, T S N and Krishnaveni, K and Seshadri, S K (2003) Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Materials Chemistry and Physics, 82 (3). pp. 771-779.

Sankara Narayanan, T S N and Magesh, G and Rajendran, N (2003) Degradation of o-Chlorophenol from aqueous solution by electro-fenton process. Fresenius Environmental Bulletin, 12 (7). pp. 776-780.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Evaluation of the performance of electroless Ni-B coated brass contacts under fretting conditions. Surface Review and Letters (srl), 15 (4). pp. 443-452.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Fretting corrosion of lubricated tin plated copper alloy contacts: Effect of temperature. Tribology International, 41 (2). pp. 87-102.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Fretting corrosion of lubricated tin-plated contacts. Industrial Lubrication and Tribology, 60 (5). pp. 233-241.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2007) Fretting-corrosion mapping of tin-plated copper alloy contacts. Wear, 262 (1-2). pp. 228-233.

Sankara Narayanan, T S N and Selvakumar, S and Stephen, A (2003) Electroless Ni–Co–P ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 172 (2-3). pp. 298-307.

Sankara Narayanan, T S N and Seshadri, S K (2000) Cathodic electrosynthesis of alumina thin films and powders. Journal of Materials Science Letters, 19 (19). pp. 1715-1718.

Sankara Narayanan, T S N and Seshadri, S K (2004) Formation and characterization of borohydride reduced electroless nickel deposits. Journal of Alloys and Compounds, 365 (1-2). pp. 197-205.

Sankara Narayanan, T S N and Seshadri, S K (2009) Recent Advances In Surface Treatment And Electrodeposition. Corrosion Reviews , sp. Iss.sl suppl . pp. 533-600.

Sankara Narayanan, T S N and Stephen, A and Guruskanthan, S (2004) Electroless Ni–Co–B ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 179 (1). pp. 56-62.

Sankaran, C and Sen, M C and Bhatnagar, P P (1962) Thermal beneficiation of low grade ferruginous Manganese ores. NML Technical Journal, 4 (2). pp. 26-33.

Sankaran, C and Srinivasan, S R and Akerkar, D D (1973) Recovery of copper from dilute solutions. NML Technical Journal, 15 (4). pp. 32-41.

Santokh, Singh R and Virdhi, P S (1981) Oxygen enriched hot air blast cupola iron melting. NML Technical Journal, 23 (1-2). pp. 16-19.

Santokh, Singh R and Virdhi, P S (1989) A small melting furnace for rural sector. NML Technical Journal, 31 (1-4). pp. 28-32.

Santokh, Singh R and Virdhi, P S and Gupta, K N (1987) Studies on optimisation of sponge iron as a charge material for cupola. NML Technical Journal, 29 (1-4). pp. 14-19.

Santosh, R and Das, Goutam and Kumar, S and Singh, P K and Ghosh, M (2018) Experimental and Computational Investigation of Structural Integrity of Dissimilar Metal Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions A, 49A(6) (IF-1.874). pp. 2099-2112.

Santosh, R and Das, Swapan K and Das, Goutam and Korody, J and Kumar, S and Singh, P K and Ghosh, M (2016) Three-Dimensional Thermomechanical Simulation and Experimental Validation on Failure of Dissimilar Material Welds. Metallurgical and Materials Transactions A, 47A(7) (IF-1.874). pp. 3511-3521.

Santosh, R and Singh, P K and Das, Goutam and Korody, J and Das, S K and Kumar, S and Ghosh, M (2016) Effect of different parameters on uncertainty during evaluation of strength of dissimilar metal weld. Materialwissenschaft und Werkstofftechnik, 47(9) (IF-0.524). pp. 845-851.

Santra, Chiranjit and Rahman, Sumbul and Bojja, S and James, O O and Sen, D and Maity, S and Mohanty, Ashok and Mazumder, S and Chowdhury, Biswajit (2013) Barium, calcium and magnesium doped mesoporous ceria supported gold nanoparticle for benzyl alcohol oxidation using molecular O2. Catalysis Science & Technology, 3 (IF-3.753). pp. 360-370.

Sanyal, D (1995) Boundary-element formalism for simulation of unsteady heat-transfer in welding. Transactions of The Indian Institute of Metals , 48 (3). pp. 189-192.

Sanyal, D (1995) A boundary-element formalism for simulation of unsteady heat-transfer in welding. Transactions of the indian institute of metals, 48 (3). pp. 189-192.

Sanyal, P and Gupta, K K and Pandey, L P (1978) Standard reference materials of low-alloy steels. Research and Industry, 23 (3). pp. 143-145.

Sanyal, P and Rajeev, and Gupta, K K (1977) Comprehension methods of chemical analysis of low alloy steel. NML Technical Journal, 19 (3-4). pp. 47-51.

Sanyal, S and Chabri, S and Chatterjee, S and Bhowmik, N and Metya, Avijit Kumar and Sinha, Arvind (2016) Tribological behavior of thermomechanically treated Al-Mg-Si alloy by nanoscratch measurements. Tribiology International, 102 (IF-2.903). pp. 125-132.

Sarangi, C K and Sahu, B P and Mishra, B K and Mitra, Rahul (2020) Effect of annealing on structure and properties of pulse electroplated Ni-W alloy coating. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 85-96.

Saray, O and Purcek, G and Mahato, B and Ghosh Chowdhury, S (2012) Texture evolution of IF-steel sheets processed by equal-channel angular sheet extrusion (ECASE). Materials Science Forum, 702-703 . pp. 123-126.

Sarin, H C (1971) Iron and Steel industry in India: Our problems & aspirations. NML Technical Journal, 13 (2). pp. 33-36.

Sarkar, A and Panda, Ashis K and Mitra, A and Mallick, A B (2023) Tuneable magnetic properties of single-domain oxidation-resistant core/shell FeCo/Cu nanostructures. Journal of Materials Science-Materials in Electronics, 34(2) .

Sarkar, A N and Kumari, Soni and Jagadevan, S and Panda, Asit Baran and Pal, Sagar (2022) Simultaneous in Situ Exfoliation of Titanate and Zn-Cr Layered Double Hydroxides with a Copolymer for Photocatalytic Degradation of Organic Pollutants. ACS Applied Polymer Materials .

Sarkar, A N and Singha, K and Panda, Asit Baran and Pal, Sagar (2021) In-situ deposited CdS NPs on pH induced fully exfoliated layered titanate-biopolymeric composite and its photocatalytic activity. Polymer, 225 (IF-4.). p. 123791.

Sarkar, B and Dalal, Biswajit and Ashok, V D and Chakrabarti, Kaushik and Mitra, A and De, S K (2014) Magnetic properties of mixed spinel BaTiO3-NiFe2O4 composites. Journal of Applied Physics, 115(12) (IF- 2.185).

Sarkar, B and Das, Avimanyu (2010) A comparative study of slip velocity models for the prediction of performance of floatex density separator. International Journal of Mineral Processing, 94 (1-2). pp. 20-27.

Sarkar, B and Das, Avimanyu and Mehrotra, S P (2008) Study of separation features in floatex density separator for cleaning fine coal. International Journal of Mineral Processing, 86 (1-4). pp. 40-49.

Sarkar, B and Das, Avimanyu and Roy, Subrata and Rai, S K (2008) In depth analysis of alumina removal from iron ore fines using teetered bed gravity separator. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 117 (1). pp. 48-55.

Sarkar, C and Anuvrat, K and Garai, S and Sahu, Sumant Kumar and Chakraborty, J (2020) One pot method to synthesize three-dimensional porous hydroxyapatite nanocomposite for bone tissue engineering. Journal of Porous Materials, 27(1) (IF-2.183). pp. 225-235.

Sarkar, C and Chowdhuri, A R and Garai, S and Chakraborty, J and Sahu, Sumant Kumar (2019) Three-dimensional cellulose-hydroxyapatite nanocomposite enriched with dexamethasone loaded metal-organic framework: a local drug delivery system for bone tissue engineering. Cellulose, 26(12) (IF-4.210). pp. 7253-7269.

Sarkar, C and Kumari, P and Anuvrat, K and Sahu, Sumant Kumar and Chakraborty, J and Garai, S (2018) Synthesis and characterization of mechanically strong carboxymethyl cellulose-gelatin-hydroxyapatite nanocomposite for load-bearing orthopedic application. Journal Of Materials Science, 53/1 (IF- 2.599). pp. 230-246.

Sarkar, C and kumari, Pushpa and Anuvrat, K and Sahu, Sumant Kumar and Chakraborty, Jui and Garai, Subhadra (2017) Synthesis and characterization of mechanically strong carboxymethyl cellulose–gelatin–hydroxyapatite nanocomposite for load-bearing orthopedic application. Journal of Materials Science, 53(1) (IF- 2.599). pp. 230-246.

Sarkar, C and RayChowdhuri, Angshuman and Kumar, Amit and Laha, Dipranjan and Garai, Subhadra and Chakraborty, Jui and Sahu, Sumant Kumar (2018) One pot synthesis of carbon dots decorated carboxymethyl cellulose- hydroxyapatite nanocomposite for drug delivery, tissue engineering and Fe3+ ion sensing. Carbohydrate Polymers, 181 (IF- 4.81). pp. 710-718.

Sarkar, C and Sahu, Sumant Kumar and Sinha, Arvind and Chakraborty, J and Garai, Subhadra (2019) Facile synthesis of carbon fiber reinforced polymer-hydroxyapatite ternary composite: A mechanically strong bioactive bone graft. Materials Science and Engineering: C , 97 . pp. 388-396.

Sarkar, C and Sinha, Arvind (2020) Synthesis of fully interconnected multiporous hydroxyapatite block for orthopedic application. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 21-29.

Sarkar, Partha and Mallick, A B and Roy, Rajat K and Panda, A K and Mitra, A (2012) Structural and Giant Magneto-impedance properties of Cr-incorporated Co-Fe-Si-B amorphous microwires. Journal of Magnetism and Magnetic Materials, 324 (8). pp. 1551-1556.

Sarkar, Partha and Mohanta, Ojaswini and Pal, S K and Panda, A K and Mitra, A (2010) Magneto-Impedance behavior of Co-Fe-Nb-Si-B-based ribbons. Journal of Magnetism and Magnetic Materials, 322 (8). pp. 1026-1031.

Sarkar, Partha and Roy, Rajat K and Mitra, A and Panda, A K and Churyukanovaa, Margarita and Kaloshkina, Sergey (2012) Effect of Nb and Cr incorporation on the structural and magnetic properties of rapidly quenched FeCoSiB microwires. Journal of Magnetism and Magnetic Materials, 324 (16). pp. 2543-2546.

Sarkar, Partha and Roy, Rajat K and Panda, A K and Mitra, A (2013) Optimization of process parameters for developing FeCoSiB amorphous microwires through in-rotating-water quenching technique. Applied Physics A Materials Science & Processing, 111 (IF-1.630). pp. 575-580.

Sarkar, S K and Chowdhury, A P (1966) An electronic potentiostat for study of electrode reactions. NML Technical Journal, 8 (2). pp. 26-28.

Sarkhel, B R and Bhattacharyya, K K and Saha, P and Chattoraj, U S and Maulik, S C (2000) Effect of grinding on beneficiation of a low grade limestone sample. Journal of Metallurgy and materials Science, 42 (4). pp. 215-219.

Sarma, Y S S and Gupta, N and Bhattacharya, P (2022) A composite electrode of 2D-Ti3C2 (MXene) and polyemeraldine salt of polyaniline for supercapacitor with high areal capacitance. Polymer Engineering & Science .

Sasikumar, C and Mukhopadhyay, N K and Mehrotra, S P (2009) Energetics of mechanical activation – Application to ilmenite. Minerals Engineering, 22 (6). pp. 572-574.

Sasikumar, C and Rao, D S and Srikanth, S and Mukhopadhyay, N K and Mehrotra, S P (2007) Dissolution studies of mechanically activated Manavalakurichi ilmenite with HCl and H2SO4. Hydrometallurgy, 88 (1-4). pp. 154-169.

Sasikumar, C and Rao, D S and Srikanth, S and Ravi Kumar, B and Mukhopadhyay, N K and Mehrotra, S P (2004) Effect of mechanical activation on the kinetics of sulfuric acid leaching of beach sand ilmenite from Orissa, India. Hydrometallurgy, 75 (1-4). pp. 189-204.

Sasikumar, C and Srikanth, S and Das, S K (2006) Analysis of premature failure of a tie bar in an injection molding machine. Engineering Failure Analysis, 13 (8). pp. 1246-1259.

Sasikumar, R and Arunachalam, R M (2010) Production of nanomaterials through machining. Journal of Metallurgy and Materials Science, 52 (2). pp. 141-147.

Sastry, G V S and Rao, V V and Ramachandrarao, P (1986) A new quasi-crystalline phase in rapidly solidified Mg4CuAl6. Scripta Metallurgica, 20 (2). pp. 191-193.

Sastry, P R and Bhandary, V S and Gupte, P K and Nijhawan, B R (1967) Shell moulding with indigenous raw materials. NML Technical Journal, 9 (1). pp. 29-34.

Satapathy, P K and Behera, R K and Nayak, A K and Mishra, T (2011) Adsorptive Removal of Phosphate from Aqueous Solutions using Ceria-Titania Mixed Oxide. Asian Journal of Chemistry, 23 (7). pp. 3055-3058.

Satapathy, P K and Randhawa, N S and Das, N N (2011) Oxidative decolorization of methylene blue by leached sea-nodule residues generated by the reductionroasting ammoniacal leaching process. Environmental Technology . pp. 1-8.

Satapathy, P K and Randhawa, N S and Das, N N (2012) Oxidative decolorization of methylene blue by leached sea-nodule residues generated by the reduction-roasting ammoniacal leaching process. Environmental Technology, 33 (5). pp. 515-522.

Satendra, Kumar and Sankara Narayanan, T S N (2008) Corrosion behaviour of Ti–15Mo alloy for dental implant applications. Journal of Dentistry, 36 (7). pp. 500-507.

Satendra, Kumar and Sankara Narayanan, T S N (2009) Electrochemical characterization of Beta-Ti alloy in Ringer’s solution for implant application. Journal of Alloys and Compounds, 479 (1-2). pp. 699-703.

Satendra, Kumar and Sankara Narayanan, T S N (2011) Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium. Journal of Applied Electrochemistry, 41 . pp. 123-127.

Satendra, Kumar and Sankara Narayanan, T S N and Manimaran, A and Suresh Kumar, M (2007) Effect of lead content on the dezincification behaviour of leaded brass in neutral and acidified 3.5% NaCl solution. Materials Chemistry and Physics, 106 (1). pp. 134-141.

Satendra, Kumar and Sankara Narayanan, T S N and Saravana Kumar, S (2010) Influence of fluoride ion on the electrochemical behaviour of β-Ti alloy for dental implant application. Corrosion Science, 52 (5). pp. 1721-1727.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh (2010) Corrigendum to “Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time” [Mater. Sci. Eng., 29 (2009) 1942–1949]. Materials Science and Engineering: C, 30 (2). p. 330.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Fretting corrosion behaviour of thermally oxidized CP-Ti in Ringer’s solution. Corrosion Science, 52 (3). pp. 711-721.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Surface modification of CP-TI to improve the fretting corrosion resistance: Thermal oxidation vs. anodizing. Materials Science and Engineering: C, 30 (6). pp. 921-927.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of CP Ti — An electrochemical and structural characterization. Materials Characterization, 6 1 . pp. 589-597.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2009) Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time. Materials Science and Engineering C, 29 (6). pp. 1942-1949.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization. Materials Chemistry and Physics, 119 (1-2). pp. 337-346.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Evaluation of fretting corrosion behaviour of CP-Ti for orthopaedic implant applications. Tribology International, 43 (7). pp. 1245-1252.

Satendra, Kumar and Sankara Narayanan, T S N and Suresh Kumar, M and Manimaran, A (2006) Dezincification of Brass in Sulfide Polluted Sodium Chloride Medium: Evaluation of the Effectiveness of 2-Mercaptobenzothiazole. International Journal of Electrochemical Science, 1 (8). pp. 456-469.

Satendra, Kumar and Singh, K K and Ramachandrarao, P (2001) Effects of fly ash additions on the mechanical and other properties of porcelainised stoneware tiles. Journal of Materials Science, 36 (24). pp. 5917-5922.

Satendra, Kumar and Sivakumar, B and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Fretting-corrosion mapping of CP-Ti in Ringer's solution. Wear, 268 (11-12). pp. 1537-1541.

Sathe, P and Sarkar, B and Das, Avimanyu (2015) Residence time distribution of solid particles in liquid fluidised bed separator. Canadian Metallurgical Quarterly, 54(1) (IF-0.495). pp. 110-122.

Sathiyamurthy, S and Thaheer, A S A and Jayabal, S (2012) Modelling and optimization of mechanical properties of Al2O3-coir-polyester composite using regasse surface methology. Journal of Metallurgy and Materials Science, 54(4) . pp. 303-310.

Satyanarayana, C and Ranganathan, M V and Banerjee, S K and Mathur, G P (1972) Beneficiation studies on low-grade molybdenite samples from Tamil Nadu. NML Technical Journal, 14 (2). pp. 60-62.

Satyanarayana, N V and Mall, R and Pal, A (2001) Fault-tolerant scheduling in distributed real-time systems. International Conference on Computer Networks and Mobile Computing, Proceedings . pp. 275-280.

Satyanarayana, N V and Mall, R and Pal, A (1996) A layered architecture for real-time systems. Microprocessors and Microsystems, 20 (4). pp. 241-250.

Sau, D C and Banerjee, A and Kumar, Manoj and Kumar, Rakesh (2015) Experimental investigation for conversion of hematite to magnetite with high ash Jhama Coal. Journal of Metallurgy and Materials Science, 57(2) . pp. 83-91.

Sau, D C and Biswal, K C (2011) Computational fluid dynamics and experimental study of the hydrodynamics of a gas–solid tapered fluidized bed. Applied Mathematical Modelling, 35 (5). pp. 2265-2278.

Sau, D C and Das, Suchandan K and Bandyopadhyay, D and Mandal, G K (2018) A reduced order mathematical model of the blast furnace raceway with and without pulverized coal injection for real time plant application. International Journal of Modelling and Simulation, online . pp. 1-12.

Sau, D C and Mohanty, Swati and Biswal, K C (2009) Bed Fluctuation Ratio for Regular and Irregular Particles in Gas-Solid Tapered Fluidised Beds. Indian Chemical Engineer, 51 (2). pp. 1-10.

Sau, D C and Mohanty, Swati and Biswal, K C (2008) Critical fluidization velocities and maximum bed pressure drops of homogeneous binary mixture of irregular particles in gas–solid tapered fluidized beds. Powder Technology, 186 (3). pp. 241-246.

Sau, D C and Mohanty, Swati and Biswal, K C (2010) Experimental studies and empirical models for the prediction of bed expansion in gas–solid tapered fluidized beds. Chemical Engineering and Processing: Process Intensification, 49 (4). pp. 418-424.

Sau, D C and Mohanty, Swati and Biswal, K C (2008) Minimum fluidization velocity at elevated temperature in tapered fluidized bed. Chemical Engineering and Processing: Process Intensification, 47 (2008). pp. 2391-2394.

Sawaguchi, Takahiro and Sahu, Puspendu and Kikuchi, Takehiko and Ogawa, Kazuyuki and Kajiwara, Setsuo and Kushibe, Atsumichi and Higashino, Masahiko and Ogawa, Takatoshi (2006) Vibration mitigation by the reversible fcc/hcp martensitic transformation during cyclic tension–compression loading of an Fe–Mn–Si-based shape memory alloy. Scripta Materialia, 54 (11). pp. 1885-1890.

Schulz, A and Srivastava, V C and Uhlenwinkel, V and Bauckhage, K (2004) Spray forming of 2014-Al alloy based composites with injection of SiC particulates. Zeitschrift Fur Metallkunde , 95 (9). pp. 763-768.

Schwartz, W and Haase, W (1964) Short rotary furnace and its application in the treatment of battery scrap. NML Technical Journal, 6 (1). pp. 42-44.

Scott, D (1966) Substitute alloys as bearing materials. NML Technical Journal, 8 (1). pp. 25-30.

Scott, D (1966) Substitute Alloys as Bearing Materials. NML Technical Journal, 8 (1). pp. 24-30.

Scott, D (1965) Techniques for the study of micro-phases and their influence on material properties. NML Technical Journal, 7 (1). pp. 32-40.

Sehra, J C and Shah, V D and Rakhasia, R H and Bose, D K (1997) Production of MoO3 from Indian molybdenite concentrate by soda ash roasting. NML Technical Journal, 39 (4). pp. 221-227.

Sekhar, K C and Gupta, K K and Bhattacharjee, S and Chakravarty, S (2004) The determination of gold in ore samples by inductively coupled plasma optical emission spectrometry (ICP-OES). Spectrochimica Acta Part B Atomic Spectroscopy, 25 (4). pp. 165-169.

Sekhar, K C and Subramanian, S and Modak, J M and Natarajan, K A (1998) Removal of metal ions using an industrial biomass with reference to environmental control. International Journal of Mineral Processing, 53 (1-2). pp. 107-120.

Selvi, G T and Jha, S K (2022) Anomalous interfacial stress generation and role of elasto-plasticity in mechanical failure of Si-based thin film anodes of Li-ion batteries. Bulletin of Materials Science, 45(1) .

Selvi, G T and Jha, S K (2021) Discharge Profile and Its Correlation with Estimated Parametric Sensitivity and Electrical Contact Resistance Losses in Li-Ion Battery. Journal of The Electrochemical Society (JES), 168(11) .

Sen, M C and Banerjee, T (1966) Recovery of lead from scraps. NML Technical Journal, 8 (3). pp. 33-37.

Sen, Mainak and Suman, Swati and Mukherjee, Shreya and Banerjee, Trideep and Sivaprasad, S and Tarafder, S and Bhattacharjee, Amit and Kar, Sujoy (2021) Low cycle fatigue behavior and deformation mechanism of different microstructures in Ti-5Al-5Mo-5V-3Cr alloy. International Journal of Fatigue, 148 (IF-4.369 ). p. 106238.

Sen, P and Misra, D D (1972) The problem of the Iron Ore Fines in India. NML Technical Journal, 14 (2). pp. 47-55.

Sen, P C and Rao, M R K and Bhaskar Rao, H V (1964) The suitability of Jainti dolomite for sintering in shaft kilns. NML Technical Journal, 6 (2). pp. 32-34.

Sen, P K (1965) Apparent activation of energy decarbonisation of Fe-C melts. NML Technical Journal, 7 (4). pp. 17-19.

Sen, S and Chakraborty, N and Rana, P and Sahu, Ranjan K and Singh, S and Panda, A K and Tripathy, S and Pradhan, D K and Sen, A (2016) Effect of Ti doping on the structural, electrical and magnetic properties of GaFeO3. Journal of Materials Science: Materials in Electronics, 27(5) (IF-2.019). pp. 4647-4652.

Sen, S and Choudhary, R N P (2007) Dielectric relaxation in Sr modified PST ceramics. Applied Physics A: Materials Science & Processing, 87 (4). pp. 727-731.

Sen, S and Choudhary, R N P (2008) Phase transition in Sr modified Pb(SnTi)O3 system. Journal of Alloys and Compounds, 457 (1-2). pp. 417-421.

Sen, S and Choudhary, R N P and Pramanick, P (2007) Structural and electrical properties of Ca2+-modified PZT electroceramics. Physica B: Condensed Matter, 387 (1-2). pp. 56-62.

Sen, S and Choudhary, R N P and Tarafder, A and Pramanik, P (2006) Impedance spectroscopy study of strontium modified lead zirconate titanate ceramics. Journal of Applied Physics , 99 (12). pp. 124114-124118.

Sen, S and Das, Swapan K and Mishra, Suman K and Tarafder, A (2007) Low-temperature synthesis of 0.65 PbMg1/3Nb2/3O3-0.35PbTiO(3) ceramics. Journal of the American Ceramic Society, 90 (8). pp. 2634-3638.

Sen, S and Mishra, Suman K (2008) Electrical behaviour of PMN–PT–PVDF nanocomposite. Journal of Physics D: Applied Physics, 41 (16). p. 165305.

Sen, S and Mishra, Suman K and Palit Sagar, S and Das, Swapan K (2008) Preparation and characterization of PMN-PT nanocomposite. Indian Journal Of Engineering And Materials Sciences , 15 (2). pp. 111-115.

Sen, S and Mishra, Suman K and Palit Sagar, S and Das, Swapan K and Tarafder, A (2008) Impedance analysis of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 ceramic. Journal of Alloys and Compounds, 453 (1-2). pp. 395-400.

Sen, S and Panda, A K and Prasad, K (2012) Magnetic and electric behavior of NiFe204-PVDF nanocomposites. Material Science-Poland, 30 . pp. 415-425.

Sen, S and Saha, P and Prasad, K (2010) A novel technique for the synthesis of CaCu3Ti4O12 ceramics. Materials Science-Poland, 28 (1). pp. 265-271.

Sen, S K and Banerjee, N L (1994) A new technique of decomposition of chrome ores for subsequent determination of Al, Fe, Ca and Mg. NML Technical Journal, 36 (1). pp. 25-30.

Sengupta, B and Chatterjee, S and Rott, U and Kauffman, H and Bandopadhyay, A and DeGroot, W and Nag, N K and Carbonell-Barrachina, A A and Mukherjee, Surojit (2009) A simple chemical free arsenic removal method for community water supply – A case study from West Bengal, India. Environmental Pollution, 157 (12). pp. 3351-3353.

Sengupta, K G (1994) Comparative studies on analytical methods for carbon and sulphur determination. NML Technical Journal, 36 (3). pp. 105-110.

Sengupta, P L (1993) Choice and surface preparation of the cathode used for electrowinning of manganese metal. NML Technical Journal., 35 (1-2). pp. 19-23.

Sengupta, P L and Sinha, P K and Aush, S C (1994) An approach to produce pure manganese sulphate solution by Jarosite Process. NML Technical Journal, 36 (2). pp. 55-63.

Sengupta, P L and Sinha, P K and Aush, S C (1994) Removal of potassium from the electrolyte in the production process for electrolytic manganese-dioxide. Transactions of the Indian Institute of Metals, 47 (5). pp. 339-341.

Sengupta , P L (1992) Effect of Flocculants on the Settling Rate of Electrolytic Manganese Metal Process Slurries. NML Technical Journal, 34 (3-4). pp. 23-28.

Senthil, P P and Rao, K S and Nandi, H K and Singh, V and Kumar, S and Sankaran, S and Kumar, K S and Madhu, V (2019) Influence of niobium microalloying on the microstructure and mechanical properties of high carbon nano bainitic steel. Procedia Structural Integrity , 14 . pp. 729-737.

Senthilkumar, M and Muthukumar, M (2007) Studies on the possibility of recycling reactive dye bath effluent after decolouration using ozone. Dyes and Pigments, 72 (2). pp. 251-255.

Seshu Kumar, A and Khadeer, S A and Rajinikanth, V and Pahari, Santanu and Kumar, B Ravi (2021) Evaluation of bond interface characteristics of rotary friction welded carbon steel to low alloy steel pipe joints. Materials Science and Engineering A, 824 .

Seshu Kumar, A and Ravi Kumar, B and Datta, G L and Ranganath, V R (2010) Effect of microstructure and grain size on the fracture toughness of a micro-alloyed steel. Materials Science and Engineering: A, 527 (4-5). pp. 954-960.

Seth, P P and Das, Arpan and Bar, H N and Sivaprasad, S and Basu, A and Dutta, K (2015) Evolution of Dislocation Density During Tensile Deformation of BH220 Steel at Different Pre-strain Conditions. Journal of Materials Engineering and Performance, 24(7) (IF-0.998). pp. 2779-2783.

Sethi, Ankit S and Mahobia, G S and sinha, O P (2015) Reduction behavior of iron ore pellets with addition of plastics along with conventional reducing agents. Journal of Metallurgy and Materials Science, 57(3) . pp. 167-171.

Shah, Minal and Bakshi, Subhankar Das (2018) Three body abrasive wear of carbide-free bainite martensite and bainite-martensite structure of similar hardness. Wear, 402–403 (IF-2.531). pp. 207-215.

Shah, Minal and Das, S K and Ghosh Chowdhury, S (2019) Effect of Alloying Elements on Microstructure and Mechanical Properties of Air-Cooled Bainitic Steel. Metallurgical and Materials Transactions A, 50(5) . pp. 2092-2102.

Shah, Minal and Das, Suchandan K (2018) An Artificial Neural Network Model to Predict the Bainite Plate Thickness of Nanostructured Bainitic Steels Using an Efficient Network-Learning Algorithm. Journal of Materials Engineering and Performance . pp. 1-11. (In Press)

Shah, Minal and Roy, S and Sahu, Rina (2014) Production of perfect sinter-Need for blast furnaces. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 223-229.

Shah, Minal and Sahoo, K L and Das, Swapan K and Das, Goutam (2020) Wear Mechanism of High Chromium White Cast Iron and Its Microstructural Evolutions During the Comminution Process. Tribology Letters, 68(3) (IF-2.566).

Shahani, M J (1981) Biohydrometallurgy in India 1980–1981 — A brief round-up. Hydrometallurgy, 7 (4). pp. 375-380.

Shahani, M J (1983) Biohydrometallurgy in india 1982 - a brief round up. Hydrometallurgy, 10 (2). pp. 257-261.

Shahani, M J (1964) A prototype vertical kiln for continuous thermal beneficiation. NML Technical Journal, 6 (3). pp. 18-21.

Shahani, M J and Saha, A K and Altekar, V A (1979) Multiple-stage extraction of nickel from ammoniacal solutions by adsorption on lignite. Transactions of the institution of mining and metallurgy section C-mineral processing and extractive metallurgy, 88 (March). C51- C52.

Shahrokhi, Sayed Vahid and Farhadinejad, Taher and Sahamieh, Reza Zarei (2010) Study of mineralization in gholgholeh area based on SEM and fluid inclusion (southwest of saghez city—Iran). Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 57-63.

Shaik, A A and Kashyap, B P and Chauthai, A (2016) Identification of favorable hot working condition for Ti-6 Al-4V. Journal of Metallurgy and Materials Science, 58(1) . pp. 9-18.

Shaik, Abdul azees and Pal, Saumit and Jha, Rajeev (2005) Briquetting : A new approach to recycle the waste iron-bearing materials generated in steel plants. Journal of Metallurgy and Materials Science, 47 (4). pp. 199-206.

Shaik, Saida and Chakravarty, S and Mishra, P R and Sahu, Rina and Chakravortty, K (2019) Caking Ability Tests for Coal Blends in Process to Utilize the Indian Origin Coals. Transactions of the Indian Institute of Metals, 72(12) (IF-1.176). pp. 3129-3137.

Shakhtshneider, T P and Myz, S A and Dyakonova, M A and Boldyrev, V V and Nizovskii, A L and Kalinkin, A V and Kumar, Rakesh (2011) Mechanochemical Preparation of Organic-Inorganic Hybrid Materials of Drugs with Inorganic Oxides. Acta Physica Plolonica, 120 (2). pp. 272-278.

Shakhtshneider, T P and Myz, S A and Nizovskii, A L and Kalinkin, A V and Boldyrev, V V and Alex, T C and Kumar, Rakesh (2014) Effect of the Selected Inorganic Carriers on the Properties of Mechanocomposites with Drugs. Doklady Chemistry, 456(2) (IF-0.351). pp. 98-102.

Shamsuddin, M and Gupta, T K S P and Nasar, A and Ramachandrarao, P (1994) Thermodynamic behavior of zinc and cadmium in liquid-Te-saturated CDTE-ZNTE solid-solutions. Thermochimica Acta , 246 (1). pp. 213-227.

Shamsuddin, M and Gupta, T K S P and Nasar, A and Ramachandrarao, P (1994) Thermodynamic behaviour of zinc and cadmium in liquid-Te-saturated CdTe---ZnTe solid solutions. Thermochimica Acta, 246 (1). pp. 213-227.

Shanmuganathan, P and Lakshmipathiraj, P and Satendra, Kumar and Sumathy, A and Srikanth, S (2012) Stability of copper smelter slag in sea water. Environmental Progress & Sustainable Energy, 31(1) . pp. 68-76.

Shanmuganathan, P and Lakshmipathiraj, P and Srikanth, S and Nachiappan, A L and Sumathy, A (2008) Toxicity characterization and long-term stability studies on copper slag from the ISASMELT process. Resources Conservation and Recycling, 52 (4). pp. 601-611.

Sharan, R and Saksena, N P and Prasad, R (1975) Problems of wear in forging dies. NML Technical Journal, 17 (1-2). pp. 10-14.

Sharma, C and Pramanik, S (1971) Some observations on isothermal ageing behaviour of wrought Al-Mg-Si alloys. NML Technical Journal, 13 (3). pp. 80-82.

Sharma, D and Gupta, S and Mehta, B R (2020) Techniques for investigation: Semiconductor/electrolyte interface processes in photo electrochemical cell for solar water splitting. Journal of Metallurgy and Materials Science,, 62(1-2) . pp. 75-54.

Sharma, J (2018) Ferrite salt bath nitrocarburizing process and its various trade names-A review. Journal of Metallurgy and Materials Science , 60(2) . pp. 63-71.

Sharma, Mamta and Bhowmik, Tishrota and Mishra, V (2021) Significance of washability on heat-altered coal from Jharia and Raniganj Coalfields, India. International Journal of Oil, Gas and Coal Technology, 27(2) . pp. 169-185.

Sharma, R and Bose, S K (1982) Using lattice parameter to estimate activation energy. NML Technical Journal, 24 (3-4). pp. 28-30.

Sharma, R and Kumar, Sanjeev and Saha, R (2019) A comprehensive survey on selective laser sintering: An additive manufacturing technique. Journal of Metallurgy and Materials Science, 61(1) . pp. 51-60.

Sharma, S and Azad, S C and Khan, Md Soaib and Ranjan, R and Behera, Banarji and Choudhura, R N P (2014) Effect of Gd3+-substitution on structural and electrical properties of lead zirconate titanate (PZT; Zr/ Ti = 55/45) ceramics. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 137-142.

Sharma, S and Khan, Md Soaib and Ranjan, Rajeev and Choudhary, R N P (2015) Energy material Sm3+-modified lead zirconate titanate (PZT) ceramics : preparation, characterisation and application. Journal of Metallurgy and Materials Science, 57(3) . pp. 151-155.

Sharma, S and Mukherjee, T (1977) Structure and creep properties of commercial heats of 2¼ Cr-I Mo steel made in TISCO in comparison with international standards. NML Technical Journal, 19 (1). pp. 8-14.

Sharma, S and Nanda, T and Adhikary, M and Venugopalan, T and Kumar, B Ravi (2016) A simulation study of pearlite-to-austenite transformation kinetics in rapidly heated hot-rolled low carbon steel. Materials and Design, 107 (IF-4.364). pp. 65-73.

Sharma, S C and Girish, B M and Kulkarni, R S and Kamath, R (1996) Drillability of zinc/graphite metal matrix composites. NML Technical Journal, 38 (3). pp. 127-131.

Sharma, S C and Girish, B M and Kulkarni, R S and Kamath, R (1996) Machinability of zinc alloy based particulate metal matrix composites. NML Technical Journal, 38 (3). pp. 107-111.

Sharma, S C and Girish, B M and Ramachandrarao, P (1996) Tribological properties of zinc alloy based composites for bearing applications. NML Technical Journal, 38 (2). pp. 73-76.

Sharma, S C and Venkatesh, J and Girish, B M (1996) Mechanical properties of lead alloy based composite materials for battery applications. NML Technical Journal, 38 (3). pp. 95-100.

Sharma, Sailaja and Kumar, B Ravi and Kashyap, B P and Prabhu, N (2018) Effect of stored strain energy heterogeneity on microstructure evolution of 90% cold rolled AISI 304L stainless steel during interrupted annealing treatment. Materials Characterization, 140 (IF-2.714). pp. 72-85.

Sharma, Sailaja and Kumar, B Ravi and Kashyap, B P and Prabhu, N (2018) Effects of concurrent strain induced martensite formation on tensile and texture properties of 304L stainless steel of varying grain size distribution. Materials Science and Engineering: A Structural materials properties microstructure, 725 (IF-3.094). pp. 215-227.

Sharma, Sweta and Khan, Soib and Ranjan, Rajiv and Choudhary, R N P (2017) Analysis of impedance and electric modulus properties of sensing and transducing material lead zirconate titanate (PZT) ceramics doped with gadolinium. Journal of Metallurgy and Materials Science, 59(2) . pp. 49-58.

Sharma, T (1997) Extraction of potassium from glauconitic sandstone. NML Technical Journal, 39 (3). pp. 151-156.

Sharma, T L (1990) Structural Studies of the Anodic Oxide Films Formed on Aluminium and its Alloys. NML Technical Journal, 32 (1-4). pp. 18-28.

Sharma, T L and Nag, A and Arora, S M and Trehan, Y N and Altekar, V A (1976) Anodizing of hot-dip aluminized mild and stainless steel improves corrosion and heat resistance. NML Technical Journal, 18 (1). pp. 1-5.

Sharma, T L and Trehan, Y N (1976) Integral colour anodizing of aluminium and aluminium alloys. NML Technical Journal, 18 (3). pp. 54-61.

Sharma, T L and Trehan, Y N (1980) Integral colour anodizing of aluminium and aluminium alloys in molybdate containing acidic baths. NML Technical Journal, 22 (1-2). pp. 9-19.

Sharma, T L and Trehan, Y N (1984) Integral colour anodizing of aluminium and its alloys in organic and mixed acid baths. NML Technical Journal, 26 (3-4). pp. 37-43.

Sharma, T L and Trehan, Y N and Narang, S K (1983) Permanent black finishes on aluminium. Journal of the Electrochemical Society of India, 32 (2). pp. 266-272.

Shashikala, A R and Shridhar, V S (2016) Corrosion studies of electroless chomium based coatings. Journal of Metallurgy and Materials Science, 58(1) . pp. 19-24.

Shavrin, S V and Shenouda, F N and Sherif, S A (1962) Process-Analysis of the Reduction of Ores and Sintered Material as a Function of Time. NML Technical Journal, 4 (3). pp. 18-21.

Shaw, S K and Sharma, A and Kailashiya, J and Gupta, Santosh K and Meena, Sher Singh and Dash, D and Maiti, P and Prasad, N K (2023) Mesoporous Fe3O4 nanoparticle: A prospective nano heat generator for thermo-therapeutic cancer treatment modality. Journal of Magnetism and Magnetic Materials, 578 .

Sheikh, L and Sinha, S and Singhababu, Y N and Verma, V and Tripathy, S and Nayar, S (2018) Traversing the profile of biomimetically nanoengineered iron substituted hydroxyapatite:synthesis, characterization, property evaluation, and drug release modeling. RSC Advances, 8(35) (IF-3.049). pp. 19389-19401.

Sheikh, Lubna and Dutta, Abinash and Chandra, R and Nayar, S (2015) Effect of Ferrofluids on Microbes. International Journal of New Technologies in Science and Engineering, 2(3) . pp. 109-117.

Sheikh, Lubna and Mahto, Neha and Nayar, S (2015) In situ synthesis of hydroxyapatite nanocomposites using iron oxide nanofluids at ambient conditions. Journal of Materials Science: Materials in Medicine, 26(1) (IF-2.379). p. 5393.

Sheikh, Lubna and Tripathy, S and Nayar, S (2016) Biomimetic matrix mediated room temperature synthesis and characterization of nano-hydroxyapatite towards targeted drug delivery. Rsc Advance, 6(67) (IF-3.108). pp. 62556-62571.

Sheikh, Lubna and Vohra, R and Verma, A K and Nayar, S (2015) Biomimetically Synthesized Aqueous Ferrofluids Having Antibacterial and Anticancer Properties. Materials Sciences and Applications, 6 . pp. 242-250.

Sheila, D and Sankaran, C and Khangaonkar, P R (1991) Studies on the extraction of magnesia from low grade magnesites by carbon dioxide pressure leaching of hydrated magnesia. Minerals Engineering, 4 (1). pp. 79-88.

Shekhar, S and Singh, R K and Chalavadi, G (2016) Study of Process Efficiency for High-Ash Fine Coal Cleaning in a Kelsey Centrifugal Jig. International Journal of Coal Preparation and Utilization (IF-0.673). pp. 1-10.

Shekhar, Saurabh and Kumari, V and Sinha, S and Mishra, D and Agarwal, A and Sahu, K K (2022) Petro-Mineralogical and Geochemical Evaluation of Glauconitic Rocks of the Ukra Member (Bhuj Formation), Kutch Basin, India. Clays and Clay Minerals, 70(1) . pp. 135-153.

Shekhar, Saurabh and Mishra, D and Agrawal, A and Sahu, K K (2017) Physical and chemical characterization and recovery of potash fertilizer from glauconitic clay for agricultural application. Applied Clay Science, 143 (IF-3.101). pp. 50-56.

Shekhar, Saurabh and Mishra, D and Agrawal, A and Sahu, K K (2017) Physico-chemical treatment of glauconitic sandstone to recover potash and magnetite. Journal of Cleaner Production, 147 (IF-5.715). pp. 681-693.

Shekhar, Saurabh and Singh, R K and Chalavadi, G (2018) Study of Process Efficiency for High-Ash Fine Coal Cleaning in a Kelsey Centrifugal Jig. International Journal of Coal Preparation And Utilization, 38(5) (IF-1.527). pp. 250-259.

Shekhar, Saurabh and Sinha, S and Mishra, D and Agrawal, A and Sahu, K K (2020) A sustainable process for recovery of potash fertilizer from glauconite through simultaneous production of pigment grade red oxide. Sustainable Materials and Technologies, 23 (IF-4.375). e00129.

Shi, D and Bhattacharya, S and Nayar, S and Webster, T J (2016) Optimizing superparamagnetic iron oxide nanoparticles as drug carriers using an in vitro blood-brain barrier model. International Journal Of Nanomedicine, 11 (IF- 4.3).

Shi, D and Sun, L L and Mi, G J and Sheikh, Lubna and Bhattacharya, S and Nayar, S and Webster, T J (2014) Controlling ferrofluid permeability across the blood-brain barrier model. Nanotechnology, 25(7) (IF-3.672).

Shibe, Vineet and Chawla, Vikas (2017) Enhancement in wear resistance by depositing Fe-C-Cr based hardfacing alloys on ASTM A36 steel. Journal of Metallurgy and Materials Science, 59(1) . pp. 1-9.

Shikuku, V O and Mishra, T (2021) Adsorption isotherm modeling for methylene blue removal onto magnetic kaolinite clay: a comparison of two-parameter isotherms. Applied Water Science, 11(6) .

Shin, Doyun and Jeong, Jinki and Lee, Sujeong and Pandey, B D and Lee, Jae-chun (2013) Evaluation of bioleaching factors on gold recovery from ore by cyanide-producing bacteria. Minerals Engineering, 48 (IF-1.207). pp. 20-24.

Shivam, V and Kar, S and Bansal, G K and Chandan, A K and Sahoo, Biraj K and Mandal, G K and Mukhopadhyay, N K and Srivastava, V C (2023) A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties. Journal of Alloys and Compounds, 952 .

Shivam, V and Kar, S and Mandal, G K and Srivastava, V C (2023) Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy. Journal of Alloys and Compounds, 963 .

Shravan Kumar, K and Biswas, Krishanu (2013) Effect of thiourea on grain refinement and defect structure of the pulsed electrodeposited nanocrystalline copper. Surface and Coatings Technology, 214 (IF-1.867). pp. 8-18.

Shravan Kumar, K and Biswas, Krishanu and Balasubramaniam, R (2011) Mechanism of Film Growth of Pulsed Electrodeposition of Nanocrystalline Copper in Presence of Thiourea. Journal of Nanoparticle Research, 13 (11). pp. 6005-6012.

Shukla, A K and Sivakumar, B and Mishra, Suman K (2020) Corrosion Behavior of Ti-Si-B-C Nanocomposite Hard Coating with Different Si Contents on 4130 Steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 51(7) (IF-2.050). pp. 3576-3586.

Shukla, R and Das, Swapan K and Ravi Kumar, B and Ghosh, S K and Kundu, S and Chatterjee, S (2012) An Ultra-low Carbon, Thermomechanically Controlled Processed Microalloyed Steel: Microstructure and Mechanical Properties. Metallurgical and Materials Transactions A, 43 (12). pp. 4835-4845.

Shuvaeva, E and Kaloshkin, S and Churyukanovaa, Margarita and Perminov, A and Khriplivets, I and Mitra, A and Panda, A K and Roy, Rajat K and Murugaiyan, Premkumar and Zhukova, V and Zhukov, A (2018) The impact of bending stress on magnetic properties of finemet type microwires and ribbons. Journal of Alloys and Compounds, 743 (IF-3.133). pp. 388-393.

Shyam, A K (1984) Botanical investigations in singhbhum copper belt. Journal of the geological society of India, 25 (5). pp. 303-304.

Shyam, A K (1984) Geobotanical studies in Singhbhum district Bihar. NML Technical Journal, 26 (1-2). pp. 15-33.

Shyamal, S and Hajra, P and Mandal, H and Singh, J K and Satpati, A K and Pande, S and Bhattacharya, C (2015) Effect of Substrates on the Photoelectrochemical Reduction of Water over Cathodically Electrodeposited p-Type Cu2O Thin Films. ACS Applied Materials and Interfaces, 7(33) (IF-6.723). pp. 18344-18352.

Siddique, A B and Hossain, S M and Pramanick, A K and Ray, M (2021) Excitation dependence and independence of photoluminescence in carbon dots and graphene quantum dots: insights into the mechanism of emission. Nanoscale, 13(39) .

Siddique, A B and Morrison, K and Venkata, G and Pramanick, A K and Banerjee, N and Ray, M (2021) Charge Transport through Functionalized Graphene Quantum Dots Embedded in a Polyaniline Matrix. ACS Applied Electronic Materials, 3(3) . pp. 1437-1446.

Siddique, A B and Mukhuti, K and Choudhary, S and Pramanick, A K and Hossain, S M and Ray, M (2022) Critical investigation of up-conversion and dual emission from nitrogen functionalized graphene quantum dots. Journal of Luminescence, 244 .

Siddique, A B and Pramanick, A K and Chatterjee, S and Ray, M (2018) Amorphous Carbon Dots and their Remarkable Ability to Detect 2,4,6-Trinitrophenol. Scientific Reports, 8 (IF-4.525). p. 9770.

Siddique, A B and Singh, V P and Pramanick, A K and Ray, M (2020) Amorphous carbon dot and chitosan based composites as fluorescent inks and luminescent films. Materials Chemistry and Physics, 249 (IF-3.408).

Sindhura, D and Venkata, S M and Murthy, G V S (2019) Comprehensive Microstructural Evaluation of Precipitation in Inconel 718. Metallography, Microstructure, and Analysis, 8(2) . pp. 233-240.

Singh, A and Singh, B P and Wani, M R and Kumar, D and Singh, J K and Singh, Vakil (2013) Effect of anodization on corrosion behaviour and biocompatibility of Cp-titanium in simulated body fluid. Bulletin of Materials Science, 36(5) (IF-0.584). pp. 931-937.

Singh, A K and Shukla, N K and Srivastava, S K and Haldar, D D and Roy, B N and Sharma, Mamta (2009) Precautionary Measures in Determining Volatile Matter in Natural Coke Washability Fractions. International Journal of Coal Preparation and Utilization , 29 (1). pp. 34-47.

Singh, Ashok K and Sharma, Mamta and Singh, Mahendra P (2013) SEM and reflected light petrography: A case study on natural cokes from seam XIV, Jharia coalfield, India. Fuel, 112 (IF-3.357). pp. 502-512.

Singh, B N (1974) Nickel catalyst-A review. NML Technical Journal, 16 (1-2). pp. 23-26.

Singh, B N (1972) Preparation of granular silver catalyst. NML Technical Journal, 14 (4). pp. 127-128.

Singh, B N (1970) Silver as catalyst. NML Technical Journal, 12 (3). pp. 83-85.

Singh, B N and Chakravarti, H K (1965) Electrolytic recovery of tin from tinplate scrap. NML Technical Journal, 7 (4). pp. 9-12.

Singh, B N and Kar, B C and Banerjee, T (1966) Manganese carbonate from low-grade Indian manganese ores. NML Technical Journal, 8 (2). pp. 20-22.

Singh, B N and Mohanty, B N and Akerkar, D D and Altekar, V A (1982) Extraction of nickel and cobalt from the nickeliferous oxide ores of India. Transactions of The Indian Institute of Metals, 35 (4). pp. 357-365.

Singh, B P and Singh, Ratnakar (1997) Investigation on the effect of ultrasonic pretreatment on selective separation of iron values from iron ore tailings by flocculation. Separation Science and Technology, 32 (5). pp. 993-1002.

Singh, Brajendra and Manoharan, S S and Sahu, Rina and Krishnan, P S R and Shinde, A B and Jain, Karishma (2007) Low temperature neutron diffraction studies showing evidence for charge-exchange-type magnetic ordering in Mn doped SrRuO(3). Journal of Applied Physics, 101 (9).

Singh, Brijpal (2017) Correlation of inclusion characteristics and microstructure with mechanical properties in low carbon steel weldments. Journal of Metallurgy and Materials Science, 59(3) . pp. 117-125.

Singh, C B and Gupta, R N and Vaish, A K and Roy, B N (2016) Effect of scale-up, design and process parameters on the productivity of ancient iron making process and recovery of iron in the product. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 191-199.

Singh, C B and Gupta, R N and Vaish, A K and Singh, S D and Goswami, N G (2014) Ancient iron making from lean grade ores in India - An introspection. Journal of Metallurgy and Materials Science , 56(2) (NON-SCI). pp. 93-105.

Singh, C B and Vaish, A K (2018) Comparative performance of ancient iron making furnace using different varieties of wood charcoal. Journal of Metallurgy and Materials Science, 60(2) . pp. 89-94.

Singh, C B and Gupta, R N and Vaish, A K and Goswami, M C (2015) Reduction kinetics of low grade iron ore - revealing the efficacy of ancient iron making process. Journal of Metallurgy and Materials Science, 57(3) . pp. 127-134.

Singh, Charu and Meena, L K and Tiwari, S K and Singh, Raghuvir (2018) Establishing Environment Friendly Surface Treatment for AZ91 Magnesium Alloy for Subsequent Electroless Nickel Plating. Journal of The Electrochemical Society (JES), 165(2) (IF-3.259). C71-C85.

Singh, Charu and Tiwari, S K and Singh, R (2018) Deposition and characterization of electroless Ni on fluoride free pretreated AZ91 magnesium alloy. Materials Today-Proceedings, 5(9) (IF-0.837). pp. 17312-17319.

Singh, Charu and Tiwari, S K and Singh, R (2018) Deposition and characterization of electroless Ni on fluoride free pretreated AZ91 magnesium alloy. Materials Today-Proceedings, 5(9) (IF-0.837). pp. 17312-17319.

Singh, Charu and Tiwari, S K and Singh, R (2019) Effect of carbonate and phosphate conversion pretreatments and optimization on corrosion behaviour of subsequent electroless nickel coating on AZ91 alloy. Applied Surface Science, 483 . pp. 334-354.

Singh, Charu and Tiwari, S K and Singh, R (2019) Exploring environment friendly nickel electrodeposition on AZ91 magnesium alloy: Effect of prior surface treatments and temperature of the bath on corrosion behaviour. Corrosion Science, 151 . pp. 1-19.

Singh, Charu and Tiwari, S K and Singh, Raghuvir (2021) Development of corrosion-resistant electroplating on AZ91 Mg alloy by employing air and water-stable eutectic based ionic liquid bath. Surface & Coatings Technology, 428 .

Singh, D D N (1998) Awareness of corrosion problems can save millions: Economical impact of corrosion inhibitors. Transactions of the indian institute of metals, 51 (5). pp. 291-301.

Singh, D D N (2000) Current Developments in Improving the Corrosion Resistance of Zinc Coated Steel Sheets. Proceedings of Coil-Coated Steel Sheets, New Delhi, 2000 . pp. 1-19.

Singh, D D N (1996) Inhibition mechanism, testing and industrial applications of corrosion inhibitors. NML Technical Journal, 38 (1). pp. 1-23.

Singh, D D N (1985) Passivation behavior of titanium-6al-4v alloy in phosphoric-acid solution. Journal of the electrochemical society (JES), 132 (2). pp. 378-381.

Singh, D D N and Banerjee, M K (1986) Corrosion behavior of nickel in methanol. Corrosion Science, 42 (3). pp. 156-161.

Singh, D D N and Banerjee, M K (1984) Vapour phase corrosion inhibitors—a review. Anti-Corrosion Methods and Materials, 31(6) . pp. 4-22.

Singh, D D N and Banerjee, M K and Nag, P S (1982) Inhibition and polarization studies of titanium in sulphuric and hydrochloric acid solutions. NML Technical Journal, 24 (3-4). pp. 31-35.

Singh, D D N and Bhattacharya, D (2010) Performance and mechanism of action of self-priming organic coating on oxide covered steel surface. Progress in Organic Coatings, 68 (1-2). pp. 62-69.

Singh, D D N and Bhattacharya, D (2010) Performance and mechanism of action of self-priming organic coating on oxide covered steel surface. Progress in Organic Coatings, 67 (2). pp. 129-136.

Singh, D D N and Chakrabarti, S and Jha, G (2000) Latest Trends in Corrosion Resistant Hot Dip Galvanized Coatings. Galvanizing . pp. 1-7.

Singh, D D N and Dey, A K (1989) Corrosion behaviour of 304 stainless steel in dioxane. NML Technical Journal, 31 (1-4). pp. 24-27.

Singh, D D N and Dey, A K and Sharma, D S (1993) An improved process for the pickling of copper and copper based alloys. NML Technical Journal, 35 (1-2). pp. 6-12.

Singh, D D N and Dey, A K and Singh, B K (1996) Evaluation of corrosion resistance of galvanised coatings produced on steel surface through different routes. NML Technical Journal, 38 (4). pp. 151-160.

Singh, D D N and Dey, M (1998) Chloride based bright zinc plating baths: A comparative evaluation. NML Technical Journal, 40 (1). pp. 1-10.

Singh, D D N and Dey, M and Singh, V (2002) Role of buffering and complexing agents in zinc plating chloride baths on corrosion resistance of produced coatings. Corrosion, 58 (11). pp. 971-980.

Singh, D D N and Dey , A K (1993) Synergistic effects of inorganic and organic cations on inhibitive performance of propargyl alcohol on steel dissolution in boiling hydrochloric-acid solution. Corrosion , 49 (7). pp. 594-600.

Singh, D D N and Gaur, B (1995) Improving the inhibitive performance of dibenzyl sulfoxide for pickling of steel in sulfuric-acid. Corrosion, 51 (8). pp. 593-601.

Singh, D D N and Gaur, B and Dey, A K and Singh, B K and Dey, M and Ghosh, Rita (1999) Interrelating electrochemical properties, salt-spray resistance and industrial performance of white-rust controlling passivators for galvanised surfaces. NML Technical Journal, 40 (2). pp. 63-76.

Singh, D D N and Gaur, B and Ghosh, Rita and Singh, B K (1998) Role of corrosion inhibitors or grain boundary corrosion control of Cr-Mn-Cu stainless steel in pickling solution. NML Technical Journal, 40 (3). pp. 77-86.

Singh, D D N and Gaur, B and Singh, B K and Ghosh, Rita (1998) Effective inhibition of corrosion of steel in phosphoric acid solution. NML Technical Journal, 40 (2). pp. 35-44.

Singh, D D N and Ghosh, Rita (2003) Corrosion resistance performance of fusion bonded epoxy coated rebars used as reinforcement in concrete structures. Journal of Metallurgy and materials Science, 45 (2). pp. 73-83.

Singh, D D N and Ghosh, Rita (2006) Electroless nickel–phosphorus coatings to protect steel reinforcement bars from chloride induced corrosion. Surface and Coatings Technology, 201 (1-2). pp. 90-101.

Singh, D D N and Ghosh, Rita (2008) Molybdenum–phosphorus compounds based passivator to control corrosion of hot dip galvanized coated rebars exposed in simulated concrete pore solution. Surface and Coatings Technology, 202 (19). pp. 4687-4701.

Singh, D D N and Ghosh, Rita (2005) Unexpected deterioration of fusion-bonded epoxy-coated rebars embedded in chloride-contaminated concrete environments. Corrosion Science, 61 (8). pp. 815-829.

Singh, D D N and Ghosh, Rita and Singh, B K (2002) Fluoride induced corrosion of steel rebars in contact with alkaline solutions, cement slurry and concrete mortars. Corrosion Science, 44 (8). pp. 1713-1735.

Singh, D D N and Ghosh, Rita and Singh, B K (1998) Low Alloyed Thermo Mechanically Treated (TMT) Steel Rebars: An Ideal Solution for Reinforcement Corrosion. Steel in Construction, 1 (2). pp. 1-11.

Singh, D D N and Ghosh , Rita and Singh, R J (2003) Corrosion Performance of Steel Rebars Embedded in Chloride Contaminated Concrete Mortars-Role of Surface Pre-Treatments. Metals Materials and Processes, 16 (2-3). pp. 1-14.

Singh, D D N and Kumar, A (2003) A fresh look at ASTM g 1-90 solution recommended for cleaning of corrosion products formed on iron and steels. Corrosion Science, 59 (11). pp. 1029-1036.

Singh, D D N and Pandeya, A (2010) Role of Self-Assembled Monolayer of 1,2,3-Benzotriazole in Protecting Copper Artifacts Covered with Sulfide Film. Corrosion, 66 (11). 115002-115002-11.

Singh, D D N and Singh, T B and Chatterjee, P and Patty, B B and Mukherjee, K P (1990) Chemical corrosion control for sour crude oil pipelines. Corrosion prevention & control, 37(2) . pp. 37-41.

Singh, D D N and Singh, T B and Gaur, B (1995) The role of metal cations in improving the inhibitive performance of hexamine on the corrosion of steel in hydrochloric acid solution. Corrosion Science, 37 (6). pp. 1005-1019.

Singh, D D N and Venugopalan, T (2013) Understanding the Corrosion and Remedial Measures to Control the Deterioration of Reinforcement Steel Bars by Modification in Their Chemistry and Application of Surface Coatings. Transactions of the Indian Institute of Metals, 66(5-6) (IF-0.215). pp. 677-687.

Singh, D D N and Yadav, Shyamjeet (2008) Role of tannic acid based rust converter on formation of passive film on zinc rich coating exposed in simulated concrete pore solution. Surface and Coatings Technology, 202 (8). pp. 1526-1542.

Singh, D D N and Yadav, Shyamjeet and Saha, Jayant K (2008) Role of climatic conditions on corrosion characteristics of structural steels. Corrosion Science, 50 (1). pp. 93-110.

Singh, G and Nanda, T and Miadad, S J and Gorain, N C and Venugopalan, T and Kumar, B R (2019) Correlation between Luders band formation and precipitation kinetics behaviour during the industrial processing of interstitial free high strength steels. Archives of Civil and Mechanical Engineering, 19(2) . pp. 469-483.

Singh, Gurdial and Kar, B C (1965) Studies on the preparation of cryolite by fluoboric acid process. NML Technical Journal, 7 (3). pp. 21-24.

Singh, H (1976) Some aspects of designing electric tunnel kilns for ceramic industry. NML Technical Journal, 18 (3). pp. 47-53.

Singh, H (1963) Some observations on electrical power distribution system of heavy integrated metallurgical pilot plants. NML Technical Journal, 5 (4). pp. 24-28.

Singh, H (1969) Some observations on the design and construction of high temperature furnaces. NML Technical Journal, 11 (3). pp. 21-25.

Singh, H and Nijhawan, B R (1966) A high temperature graphitizing furnace for laboratory use. NML Technical Journal, 8 (2). pp. 23-25.

Singh, H P and Misra, S S and Leach, J S L (1980) Enthalpy effects in quaternary liquid woods alloy. Philosophical magazine A-Physics of condensed matter structure defects and mechanical properties, 41 (1). pp. 9-20.

Singh, Inder (1970) Effect of inhibitors on the permeability and diffusion co-efficient of hydrogen in steel. NML Technical Journal, 12 (1). pp. 22-28.

Singh, Inder (1993) Inhibition of steel corrosion by thiourea derivatives. Corrosion, 49 (6). pp. 473-478.

Singh, Inder and Banerjee, M K and Nag, P S (1981) Internal hydrogen embrittlement of cold drawn steels. Transactions of The Indian Institute of Metals, 34 (6). pp. 433-439.

Singh, Inder and Banerjee, T (1972) Effect of 2-mercaptobenzothiazole on aciddissolution and hydrogen absorption of steel. Corrosion Science, 12 (6). pp. 503-515.

Singh, Inder and Basu, D K and Singh, M N and Bhattamishra, A K and Dev, S C (1997) Role of silicon in the corrosion resistance of Cu-Si alloys in natural seawater. Anti-corrosion methods and materials, 44 (3). 195- .

Singh, Inder and Bhattacharjee, A K (1993) Electrochemical differentiation between aluminised and galvanised steels in aerated chloride environments. Anti-Corrosion Methods and Materials, 40 (6). pp. 4-6.

Singh, Inder and Bhattamishra, A K and Basu, D K (1997) Electrochemical behaviour of AISI-316 stainless steels in sulphuric nitric acid mixtures. Anti-corrosion methods and materials, 44(3) . pp. 200-203.

Singh, Inder and Dey, A K and Altekar, V A (1982) Effect of some organic inhibitors on corrosion and hydrogen absorption by high carbon steel. NML Technical Journal, 24 (3-4). pp. 36-39.

Singh, Inder and Singh, M N (1992) Studies on Aluminium-Zinc Alloy Coating. NML Technical Journal, 34 (3-4). pp. 1-8.

Singh, Inder and Singh, Manjit (1987) Effect of metallic cations on the corrosion and the hydrogen absorption by cold-rolled mild-steel in inhibited sulfuric-acid. Corrosion science, 43 (7). pp. 425-429.

Singh, J K and Paswan, S and Saha, D and Pandya, Achal and Singh, D D N (2021) Role of air pollutant for deterioration of Taj Mahal by identifying corrosion products on surface of metals. International journal of environmental science and technology .

Singh, J K and Singh, D D N (2012) The nature of rusts and corrosion characteristics of low alloy and plain carbon steels in three kinds of concrete pore solution with salinity and different pH. Corrosion Science, 56 . pp. 129-142.

Singh, J K and Singh, D D N (2012) Studies on defects in galvanized coating on steel wire. Indian Journal of Chemical Technology, 19 . pp. 361-365.

Singh, K and Patnaik, P and Bhaisare, D K and Jagannath, O and Krishnamurthy, N and Suri, A K (2011) Measurement of relative sticking coefficient of nitrogen on Al/Ti in a magnetron sputtering system. Journal of Metallurgy and Materials Science,, 53 (3). pp. 261-268.

Singh, K A and Pathak, L C and Roy, S K (2007) Effect of citric acid on the synthesis of nano-crystalline yttria stabilized zirconia powders by nitrate–citrate process. Ceramics International, 33 (8). pp. 1463-1468.

Singh, K K (2000) Refractories for iron and steel making: Recent trends and future prospects. Journal of Metallurgy and materials Science, 42 (2). pp. 75-79.

Singh, Komal and Anwar, S and Dubey, Paritosh and Mishra, Suman K (2023) Enhanced thermoelectric performance of mechanically hard nano-crystalline-sputtered SnSe thin film compared to the bulk of SnSe. Journal of Materials Science: Materials in Electronics, 34(13) .

Singh, Komal and Soni, S K and Anwar, S and Dubey, Paritosh and Mishra, Suman K (2022) Influence of temperatures on structure, thermoelectric, and mechanical properties of nanocrystalline SnSe thin films deposited by thermal evaporation. Materials Today Communications, 32 .

Singh, Kulwant and Bidaye, A C and Suri, A K (2010) Model for prediction of coating composition deposited by sputtering using composite target in a reactive gas environment. Journal of Metallurgy and Materials Science, 52 (4). pp. 317-329.

Singh, M and Das, A and Venugopalan, T and Mukherjee, K and Walunj, Mahesh and Nanda, T and Ravi Kumar, B (2018) Impact of Martensite Spatial Distribution on Quasi-Static and Dynamic Deformation Behavior of Dual-Phase Steel. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49A(2) (IF-3.094). pp. 463-475.

Singh, M and Kumar, R and Shukla, D K and Arora, K S (2019) Phase transformation and impact toughness in HAZ of micro alloyed X80 line pipe steel. Materials Research Express, Volume 6, Number 2, 6(2) .

Singh, M K and Banerjee, M K and Narang, S K (2004) A study on eco-friendly chromate-free passivation of galvanised steels. Journal of Metallurgy and materials Science, 46 (3). pp. 183-189.

Singh, M N and Basu, D K and Bhattamishra, A K and Kumari, Seema and Banerjee, M K (2000) Corrosion behaviour of commercial paints on mild steel in aggressive media. Journal of Metallurgy and materials Science, 42 (2). pp. 105-112.

Singh, M N and Mukherjee, K P and Guha, B K and Altekar, V A (1978) Evaluation of corrosion-resistance properties of nickel-free stainless-steels developed in National-Metallurgical-Laboratory. Transactions of the Indian Institute of Metals, 31 (1). pp. 61-64.

Singh, M N and Singh, Inder (1985) Polarisation studies of the cold rolled mild steel in sulphuric acid containing metallic ions and an inhibitor. NML Technical Journal, 27 (1-2). pp. 3-8.

Singh, M N and Singh, Inder and Pandey, J L (1997) High temperature corrosion-resistant coating on steel for short-term application. Anti-Corrosion Methods and Materials, 44 (2). pp. 90-93.

Singh, M N and Singh, T B and Bhattamishra, A K and Basu, D K and Narang, S K (2003) Utilization of zinc dross as anode during electro-deposition of zinc-iron alloy coatings on steel substrate using chloride bath. Journal of Metallurgy and materials Science, 45 (2). pp. 91-95.

Singh, M P and Arora, K S and Gupta, A and Kumar, Rajneesh and Shukla, D K and Jhunjhunwala, K P (2022) Experimental characterization of dynamic fracture toughness behavior of X80 pipeline steel welded joints for different heat inputs. Welding in the World .

Singh, M P and Arora, K S and Kumar, Rajneesh and Shukla, D K and Prasad, S S (2020) Influence of heat input on microstructure and fracture toughness property in different zones of X80 pipeline steel weldments. Fatigue & Fracture of Engineering Materials & Structures, 44(1) (IF-3.031). pp. 85-100.

Singh, M P and Arora, K S and Shajan, N and Pandu, S R and Shome, M and Kumar, R and Shukla, D (2019) Comparative analysis of continuous cooling transformation behaviour in CGHAZ of API X-80 and X-65 line pipe steels. Journal of Thermal Analysis and Calorimetry, 137(4) . pp. 1155-1167.

Singh, Manjit and Bhattamishra, A K (2007) Effect of some thiourea and quinoline derivatives on corrosion of mild steel in sulphuric acid at different temperatures. Journal of Metallurgy and Materials Science, 49 (1). pp. 39-44.

Singh, Manjit and Bhattamishra, A K and Das, N N (2009) Effect of organic additives on inhibition of corrosion of mild steel in 2M H2SO4 solution. Journal of Metallurgy and Materials Science, 51 (2). pp. 113-117.

Singh, Manjit and Kumar, Rajendra (1973) Structure of liquid aluminum-silicon alloys. Journal of Materials Science, 8 (3). pp. 317-323.

Singh, N and Nanda, T and Kumar, B R and Das, S K and Singh, V (2019) In situ investigations of microstructural changes during tensile deformation of AISI 304L stainless steels. Archives of Civil and Mechanical Engineering, 19(3) . pp. 672-679.

Singh, Narinder and Mathur, S B (1970) Recent trends in extraction of selenium & tellurium from electrolytic copper slimes. NML Technical Journal, 12 (4). pp. 101-110.

Singh, Narinder and Mathur, S B (1976) Studies on extraction of selenium and tellurium from copper electrolytic slimes by sublimation in vacuum. Phosphorus sulfur and silicon and the related elements, 1 (2-3). pp. 169-176.

Singh, Narinder and Mathur, S B (1973) Survey of indigenous coals, fly ashes and flue dusts as a potential source of germanium. NML Technical Journal, 15 (2). pp. 42-48.

Singh, Narinder and Mathur, S B and Akerkar, D D (1973) Refining of selenium-A review. NML Technical Journal, 15 (1). pp. 17-23.

Singh, Narinder and Mathur, S B and Altekar, V A (1982) Development of a metallothermic process of smelting of lead concentrate. Transactions of the Indian Institute of metals, 35 (1). 51-&.

Singh, Narinder and Mgr. Inz. Jan, Sosin (1965) Recovery of zinc and lead from the slime obtained from electrolytic zinc plant. NML Technical Journal, 7 (3). pp. 15-20.

Singh, Narinder and Muthukrishnan, V and Rogozinski, T (1970) Viscosity of blast furnace slags and its effects on their applications. NML Technical Journal, 12 (1). pp. 12-21.

Singh, Narinder and Stroncz, W (1973) Selenium in xerography. Journal of Scientific & Industrial Research, 32 (12). pp. 740-746.

Singh, Nidhi and Singh, Vakil (2008) Effect of temperature on tensile properties of near-alpha alloy Timetal 834. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 485 (1-2). pp. 130-139.

Singh, P K and Bhasin, V and Vaze, K K and Ghosh, A K and Kushwaha, H S and Murthy, D S R (2008) Fatigue studies on carbon steel piping materials and components: Indian PHWRs. Nuclear Engineering and Design, 238 (4). pp. 801-813.

Singh, P K and Ranganath, V R and Tarafder, S and Prasad, Prabha and Bhasin, V and Vaze, K K and Kushwaha, H S (2003) Effect of cyclic loading on elastic–plastic fracture resistance of PHT system piping material of PHWR. International Journal of Pressure Vessels and Piping, 80 (10). pp. 745-752.

Singh, P K and Ranganath, V R and Tarafder, S and Prasad , P and Bhasin, V and Vaze, K K and Kushwaha, H S (2003) Effect of cyclic loading on elastic-plastic fracture resistance of PHT system piping material of PHWR. International Journal of Pressure Vessels and Piping, 80 (10). pp. 745-752.

Singh, Pundan K. and Das, Anindya and Sivaprasad, S and Biswas, P and Verma, Rahul K. and Chakrabarti, D (2017) Energy absorption behaviour of different grades of steel sheets using a strain rate dependent constitutive model. Thin-Walled Structures, 111 (IF- 2.829). pp. 9-18.

Singh, R and Banerjee, S (1990) Morphological and compositional changes of the carbides in a ferritic steel after long term service exposure. Scripta Metallurgica et Materialia, 24 (6). pp. 1093-1098.

Singh, R and Tiwari, S K (2016) Corrosion and Tribological Behavior of Laser Processed 13Cr-4Ni and AISI 304 Stainless Steels. Lasers in Engineering, 35(1-4) (IF-0.214). pp. 63-74.

Singh, R J and Jonnalaradda, K N and Guruprasad, P J and Metya, Avijit Kumar and Kushwaha, H S (2021) Effect of constitutive model on residual stress development in the pressure tube rolled joint. International Journal of Pressure Vessels and Piping, 190 .

Singh, R J and Surbhi, (2013) Lowering of alumina in high alumina iron ores to produce DR grade iron ore pellets. Journal of Metallurgy and Materials Science, 55(1) . pp. 37-48.

Singh, R K (2012) Corrosion mitigation of stainless steel in milk by aloevera juice. Journal of Metallurgy and Materials Science, 54(1) . pp. 77-85.

Singh, R K and Mehta, K D and Sharma, Mamta and Bhattacharyya, K K (2011) Effect of Magnetic Field Intensity on Iron ore Separation Efficiency in slimes. Journal of Sustainable Planet, 2 (3). pp. 44-49.

Singh, R K and Misra, S (2013) Corrosion protection of stainless steel in CO2 environment by nanocoating of zinc phosphate with DLC filler. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 149-156.

Singh, R K and Paswan, S (2024) Isothermal High-Temperature Oxidation Behaviour of Nickel-Based Superalloy IN740H. Transactions of Indian Institute of Metals .

Singh, R K and Sahu, J K (2019) Influence of hold type and duration on cyclic deformation behaviour of IN740H. Materials Science and Technology, 35(4) . pp. 488-499.

Singh, R K and Sahu, J K (2019) Yield strength anomaly and dynamic strain ageing behaviour of recently developed advanced ultra-supercritical boiler grade wrought Ni-based superalloy IN 740H. Materials at High Temperatures, 36(3) . pp. 220-231.

Singh, R K and Sahu, J K and Tarafder, S (2016) Strain rate effect on cyclic deformation behaviour of advanced ultra-super critical boiler grade wrought Ni-based superalloy IN740H at 760 °C. Materials Science and Engineering A, 658 (IF-3.094). pp. 272-279.

Singh, R K and Sahu, K K and Chalavadi, G and Singh, Ratnakar and Padmanabhan, N P H (2019) Separation characteristics of centrifugal fluidized separator using binary density system. Mineral Processing and Extractive Metallurgy Review . pp. 1-8.

Singh, R N and Awasthi, R and Tiwari, S K (2010) Electro-Catalytic Activities of Binary Nano-Composites of Pt and NanoCarbon/Multiwall Carbon Nanotube for Methanol Electro-Oxidation. The Open Catalysis Journal, 3 (1876-214X/10). pp. 50-57.

Singh, R N and Das, L N (1988) Design and development of temperature controller for thermostat hot reference junction. NML Technical Journal, 30 (1-4). pp. 35-36.

Singh, R N and Madhu, and Awasthi, R and Tiwari, S K (2009) Iron molybdates as electrocatalysts for O2 evolution reaction in alkaline solutions. International Journal of Hydrogen Energy, 34 (11). pp. 4693-4700.

Singh, R N and Sharma, T and Singh, A and Anindita, and Mishra, D and Tiwari, S K (2008) Perovskite-type La2−xSrxNiO4 (0 ≤ x ≤ 1) as active anode materials for methanol oxidation in alkaline solutions. Electrochimica Acta, 53 (5). pp. 2322-2330.

Singh, R N and Singh, A and Mishra, D and Tiwari, S K and Gunjan, M K (2008) Influence of substitution of Ru on the electrocatalytic properties of the perovskite-type LaSrNiO4 electrode towards methanol oxidation. Indian Journal Of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical & Analytical Chemistry , 47 (8). pp. 1187-1193.

Singh, Raghubir (2000) A mechanism based approach for remaining life assessment of components exposed to prolonged creep. Transactions of the Indian Institute of Metals, 53 (3). pp. 175-183.

Singh, Raghubir (1995) Remaining life assessment of high-temperature components using threshold stress concept. Sadhana-academy proceedings in engineering sciences, 20 ( ). pp. 87-101.

Singh, Raghubir and Banerjee, S (1991) Morphological and compositional changes of the carbides in Cr-Mo-V ferritic steel. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing , 132 ( ). pp. 203-211.

Singh, Raghubir and Banerjee, S (1992) Resisting stress of a low-alloy ferritic steel after creep exposure in service. Acta metallurgica et materialia, 40 (10). pp. 2607-2616.

Singh, Raghubir and Choubey, R and Kumar, R (1976) Rationalization of the blading material for steam turbines: Their requirements and selection. NML Technical Journal, 18 (4). pp. 69-72.

Singh, Raghubir and Kumar, Rajendra (1984) On some aspects of creep deformation of low-alloy Cr-Mo-V creep resistant steels. Transactions of the Indian Institute of metals, 37 (5). p. 451.

Singh, Raghubir and Singh, S R (1997) Remaining creep life study of Cr---Mo---V main steam pipe lines. International Journal of Pressure Vessels and Piping, 73 (1). pp. 89-95.

Singh, Raghubir and Singh, S R (1997) Remaining creep life study of Cr-Mo-V main steam pipe lines. International Journal of Pressure Vessels and Piping, 73 (1). pp. 89-95.

Singh, Raghuvir (2003) The application of an electrochemical technique to determine the porosity of electroless nickel coatings produced in hypophosphite baths. Anti-corrosion Methods & Materials, 50 (2). pp. 121-128.

Singh, Raghuvir (2008) Influence of cold rolling on sensitization and intergranular stress corrosion cracking of AISI 304 aged at 500 °C. Journal of Materials Processing Technology, 206 (1-3). pp. 286-293.

Singh, Raghuvir (2022) Integrity of Additively Manufactured Alloys and Component to Environmental Degradation. Journal of Materials Engineering and Performance .

Singh, Raghuvir and Chattoraj, I and Kumar, Anil and Ravi Kumar, B and De, P K (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AISI 304 stainless steel. Metallurgical and Materials Transactions A, 34 (11). pp. 2441-2447.

Singh, Raghuvir and Dahotre, N B (2007) Corrosion degradation and prevention by surface modification of biometallic materials. Journal of Materials Science-Materials in Medicine, 18 (5). pp. 725-751.

Singh, Raghuvir and Dahotre, N B (2005) Tribology of laser modified surface of stainless steel in physiological solution. Journal of Materials Science, 40 . pp. 5619-5626.

Singh, Raghuvir and Das, Goutam and Mahato, B and Singh, P K (2017) Aging Degradation of Austenitic Stainless Steel Weld Probed by Electrochemical Method and Impact Toughness Evaluation. Metallurgical and materials transactions a-physical metallurgy and materials science, 48A(3) (IF-1.874). pp. 1064-1077.

Singh, Raghuvir and Das, Goutam and Singh, P K and Chattoraj, I (2009) Low-Temperature Sensitization Behavior of Base, Heat-Affected Zone, and Weld Pool in AISI 304LN. Metallurgical and Materials Transactions A, 40 (5). pp. 1219-1234.

Singh, Raghuvir and Gaur, B and Singh, A K (1999) Corrosion protection of stainless-steel in chlorinated solutions by electrochemical technique. NML Technical Journal, 40 (3). pp. 127-133.

Singh, Raghuvir and Gaur, B and Singh, A K (2001) Impact of Filtrate Recycling on Corrosion of Stainless Steels in Hypochlorite Solutions. Journal of Electrochemical Society of India, 50 (1). pp. 21-26.

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I (2008) Modification of Sensitization Resistance of AISI 304L Stainless Steel through Changes in Grain Size and Grain Boundary Character Distributions. Metallurgical and Materials Transactions A, 39 (10). pp. 2504-2512.

Singh, Raghuvir and Ghosh Chowdhury, S and Das, Goutam and Singh, P K and Chattoraj, I (2012) Low Temperature Sensitization on the Orthogonal Surfaces of Prior deferomed AISI 304LN and aged at 673K to 873K (400 A degress C to 600 A degress C. Metallurgical and Materials Transaction A, 43A (3). pp. 986-1003.

Singh, Raghuvir and Ghosh Chowdhury, S and Das, Goutam and Singh, P K and Chattoraj, I (2012) Study on sensitization susceptibility and texture of cold rolled AISI 304LN stainless steel. Materials Science Forum, 702-703 . pp. 677-680.

Singh, Raghuvir and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and De, P K and Chattoraj, I (2007) The importance of grain size relative to grain boundary character on the sensitization of metastable austenitic stainless steel. Scripta Materialia, 57 (3). pp. 185-188.

Singh, Raghuvir and Ghosh Chowdhury, S and Tiwari, S K and Dahotre, N B (2008) Laser surface processing of Ti6Al4V in gaseous nitrogen: corrosion performance in physiological solution. Journal of Materials Science: Materials in Medicine, 19 (3). pp. 1363-1369.

Singh, Raghuvir and Kumar, Damodar and Mishra, Suman K and Tiwari, S K (2014) Laser cladding of Stellite 6 on stainless steel to enhance solid particle erosion and cavitation resistance. Surface and Coatings Technology, 251 (IF-2.199). pp. 87-97.

Singh, Raghuvir and Kumar, Mukesh and Ghosh, M and Das, Goutam and Singh, P K and Chattoraj, I (2013) Intergranular Corrosion Behavior of 304LN Stainless Steel Heat Treated at 623 K (350 degrees C). Metallurgical and Materials Transactions A-Physical Metallurgy and Materials and Materials Science, 44A (IF-1.627). pp. 173-187.

Singh, Raghuvir and Kumar, Mukesh and Kumar , Deepak and Mishra, Suman K (2012) Erosion and Corrosion Behavior of Laser Cladded Stainless Steels with Tungsten Carbide. Journal of Materials Engineering and Performance, 21(11) (0.855 (SCI)). pp. 2274-2282.

Singh, Raghuvir and Kurella, A and Dahotre, N B (2006) Laser Surface Modification of Ti–6Al–4V: Wear and Corrosion Characterization in Simulated Biofluid. Journal of Biomaterials Applications, 21 (1). pp. 49-73.

Singh, Raghuvir and Martin, M and Dahotre, N B (2005) Influence of laser surface modification on corrosion behavior of stainless steel 316L and Ti-6Al-4V in simulated biofluid. Surface Engineering, 21 (4). pp. 297-306.

Singh, Raghuvir and Singh, A K (2002) In-plant corrosion test on special stainless steels in bleach plant of paper industry. Indian Journal of Chemical Technology, 9 (2). pp. 141-147.

Singh, Raghuvir and Singh, M N (1998) Tape coatings: A review. NML Technical Journal, 40 (4). pp. 123-129.

Singh, Raghuvir and Swaminathan, J and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2005) Effects of Cold Deformation Prior to Sensitization on Intergranular Stress Corrosion Cracking of Stainless Steel. Corrosion, 61 (9). pp. 907-916.

Singh, Raghuvir and Swaminathan, J and Paswan, S and Rajnikanth, V and Chattoraj, I (2011) Investigations on high temperature corrosion of wire enameling oven. Engineering Failure Analysis, 18 (5). pp. 1375-1387.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cladding of tungsten carbide and stellite using high power diode laser to improve the surface properties of stainless steel. Advanced Materials Research, 585 . pp. 498-501.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K and Dahotre, N B (2011) Electrochemical and mechanical behavior of laser processed Ti–6Al–4V surface in Ringer’s physiological solution. Journal of Materials Science: Materials in Medicine, 22 . pp. 1787-1796.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cavitation Erosion in Hydraulic Turbine Components and Mitigation by Coatings: Current Status and Future Needs. Journal of Materials Engineering and Performance, 21 (7). pp. 1539-1551.

Singh, Rahul and Yadav, Surya Deo and Sahoo, Biraj K and Ghosh Chowdhury, S and Kumar , Abhishek (2021) Phase transformation, Mechanical Properties and Corrosion Behavior of 304L Austenitic Stainless Steel Rolled at Room and Cryo Temperatures. Defence Science Journal, 71(3) . pp. 383-389.

Singh, Raj Kumar and Kumari, Mamta and Prasad, J N (2011) A first principle numerical approach to spin dependent transport. Journal of Metallurgy and Materials Science, 53 (3). pp. 275-287.

Singh, Raj Kumar and Kumari, Mamta and Prasad, J N (2011) Interaction of ferromagnet conduction electron spin with spatial and time varying magnetization. Journal of Metallurgy and Materials Science, 53 (2). pp. 153-159.

Singh, Rajesh Kumar (2015) Corrosion and corrosion protection of mild steel in SO environment. Journal of Metallurgy and Materials Science, 57(1) . pp. 33-40.

Singh, Rajesh Kumar (2014) Corrosion protection of mild steel by organic inhibitors. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 187-193.

Singh, Rajesh Kumar (2010) The corrosion protection of stainless steel in phosphate fertilizer industry. Journal of Metallurgy and Materials Science, 52 (2). pp. 173-180.

Singh, Rajesh Kumar (2014) Corrosion protection of stainless steel in 15% H SO 2 4. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 239-244.

Singh, Rajesh Kumar (2016) Corrosion protection of transport vehicles by nanocoating of decahydrobenzxo[8] annulene-5, 10 dihyrazone and SiC filter in H O O (moist), CO , 2 3 2 2 SO environments and weather change. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 167-179.

Singh, Rajesh Kumar (2011) Inhibition of the corrosion of mild steel in the pulp and paper industry. Journal of Metallurgy and Materials Science, 53 (4). pp. 411-418.

Singh, Rajesh Kumar and Misra, S (2013) Corrosion protection of rebar steel in marine atmosphere by nanocoating. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 313-321.

Singh, Rajesh Kumar and Singh, B K and Noor, Alam (2019) Formation of composite layer by nanocoating of organic and filler of inorganic compounds on mild steel to control in chloride ions environment. Journal of Metallurgy and Materials Science, 61(2) . pp. 109-118.

Singh, Rajesh Kumar and Misra, S (2013) Corrosion protection of mild steel in SO2 environment by nanocoating with filler. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 227-234.

Singh, Ranapratap and Pawar, Puneet (2016) Optimization and crashworthiness investigation of empty and aluminium foam filled square tubes. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 231-241.

Singh, Ranjeet K and Das, Avimanyu (2013) Analysis of separation response of Kelsey centrifugal jig in processing fine coal. Fuel Processing Technology, 115 (IF-2.816). pp. 71-78.

Singh, Ranjeet K and Dey, Shobhana and Mohanta, M K and Das, Avimanyu (2014) Enhancing the Utilization Potential of a Low Grade Chromite Ore through Extensive Physical Separation. Separation Science and Technology, 49(12) (IF-1.200). pp. 1937-1945.

Singh, Ranjeet K and Kishore, R and Sahu, K K and Chalavadi, G and Singh, R (2020) Estimation of the Fluid Velocity Profile in the Stratification Zone of a Falcon Concentrator. Mining, Metallurgy & Exploration , 37(1) (IF-0.784 ). pp. 321-331.

Singh, Ranjeet K and Sahu, Kisor Kumar and Chalavadi, G and Swain, A K and Singh, Ratnakar (2020) Experimental investigation on the separation capabilities and limitation of Falcon semi-batch concentrator. Separation Science and Technology (IF-1.718).

Singh, Ratnakar (1992) Development of a Reagent Scheme for the Beneficiation of Oxidised Copper Sulphide Ore from Malanjkhand, India. Proceeding of IV International Mineral Processing Symposium, Antalya, Turkey . pp. 1-6.

Singh, Ratnakar (1994) Split Conditioning and Combined Flotation (SCCF) Process: An Innovative approach in Beneficiation of Slimy Rock Phosphate Ore. Innovations in Mineral Processing, Lorentian University, Sudbury,Canada . pp. 1-11.

Singh, Ratnakar and Banerjee, B and Chakrovorty, N (1995) Studies on Concentration of Finely Disseminated Low Grade Graphite Ore. Metals Materials and Processes, 7 (3). pp. 1-6.

Singh, Ratnakar and Banerjee, S (1992) Resisting stress of a low-alloy ferritic steel after creep exposure in service. Acta Metallurgica Et Materialia, 40 (10). pp. 2607-2616.

Singh, Ratnakar and Bhattacharya, P and Bhattacharyya, K K and Maulik, S C (2004) Reduction of Alumina in Indian Iron Ores. Metals Materials and Processes, 16 (2-3). pp. 1-14.

Singh, Ratnakar and Bhattacharyya, P and Bhattacharyya, K K (2007) Studies on Recovery of Mineral Values using an Enhanced Gravity Separator. Advanced Gravity Separation . pp. 1-6.

Singh, Ratnakar and Dey, Shobhana and Sinha, N (2017) Performance of Different Classes of Organic Compounds as Frother in De-ashing of Indian Coking Coal by Froth Flotation. Transaction of Indian Institute of Metals, 72(2) (IF-0.91). pp. 433-442.

Singh, Ratnakar and Goswami, M C and Vaish, A K and Das, S K and Goel , R P (2005) NML's Contribution to Development of Indian Steel Industry. Motif . pp. 1-4.

Singh, Ratnakar and Rao, D S and Sinha, N and Banerjee, B and Bhattacharyya, K K (2009) Mineralogical and flotation characteristics of lead-zinc ore with a particular reference to effects of oxidation. Journal of Metallurgy and Materials Science, 51 (3). pp. 205-213.

Singh, Ratnakar and Ravi Kumar, B and Kumar, A and Dey, P K and Chattoraj, I (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AlSl 304 stainless steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science , 34-A (11). pp. 2441-2447.

Singh, Ratnakar and Singh, B P (1992) Environmental Pollution by Mill Tailings and Control Methods. Indian Journal of Environmental Protection, 12 (5). pp. 1-6.

Singh, Ratnakar and Singh, N and Singh, B P (1994) Chelating type reagents as flotation collector. NML Technical Journal, 36 (1). pp. 19-24.

Singh, Ratnakar and Singh, P (1996) Beneficiation of Non-coking Coal for Injection in Blast Furnace. In COAL-96 . pp. 1-12.

Singh, Ratnakar and Sinha, N (2010) Floatation studies on a low grade graphite sample from Palamu. Journal of Chemtracks, 12 (1). pp. 71-74.

Singh, Ratnakar and Sinha, S N (2003) Beneficiation of High Ash Indian Coal-Problems and Prospects. The Indian Mining and Engineering Journal . pp. 1-4.

Singh, Ratnakar and Subba Rao, S and Maulik, S C and Chakravorty, N (1997) Fine particles flotation - Recent trends. Transactions of the Indian Institute of Metals, 50 (5). pp. 407-419.

Singh, Ravinder Pal and Singh, Harvinder (2011) Characterization and comparison of treated and untreated rich hush ash & fly ash for metal matrix composites. Journal of Metallurgy and Materials Science, 53 (2). pp. 189-196.

Singh, S and Nanda, T and Ravi Kumar, B and Singh, V (2016) Controlled Phase Transformation Simulations to Design Microstructure for Tailored Mechanical Properties in Steel. Materials and Manufacturing Processes, 31(15) (IF-2.274). pp. 2064-2075.

Singh, S and Roy, Rajat K and Ghosh, M and Mitra , A and Panda, A K (2012) Heat Treatment Induced Martensitic Accommodation and Adaptive Anisotropy in Melt Spun Ni55Mn22Ga23 (at.%) ribbons. Journal of Applied Physics, 112(10) .

Singh, S and Sribalaji, M and Wasekar, N P and Joshii, H and Sundararajan, G and Singh, Raghuvir and Keshri , A K (2016) Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel-tungsten composite coatings. Applied Surface Science, 364 (IF-3.387 ). pp. 264-272.

Singh, S D and Biswas, D K and Mishra, K K and Ramachandrarao, P (1999) Eco-friendly cokeless-cupola. NML Technical Journal, 40 (1). pp. 1-12.

Singh, S K and Akerkar, D D (1975) A continuous and self regulating method for making copper powder by electrolysis. NML Technical Journal, 17 (1-2). pp. 23-26.

Singh, S K and Verma, B K and Pandey, L P (1989) Studies on the chelation behavior of phenanthrenequinone monosemicarbazone with rare-earth elements. Bulletin De La Societe Chimique De France (1). pp. 26-30.

Singh, Sanjay and Bhardwaj, S and Panda, A K and Ahire, V and Mitra, A and Awasthi, A M and Barman, S R (2010) Structural, Thermal and Magnetic Properties of Ga Excess Ni-Mn-Ga. Materials Science Forum, 635 . pp. 43-47.

Singh, Santokh R and Virdhi, P S and Chatterjea, A B (1973) Production of molten pig iron from fine grained iron ore, Fuel and Limestone. NML Technical Journal, 15 (2). pp. 36-41.

Singh, Sardar Swaran and Nijhawan, B R (1959) Role of Foundrymen in the Five Year Plans. NML Technical Journal, 1 (3). pp. 43-45.

Singh, Satnam and Mitra, A and Panda, A K (2009) Magnetic and structural evolution in Ni-rich off-stoichiometric NiMnGa melt spun ribbons. Journal of Metallurgy and Materials Science, 51 (3). pp. 197-203.

Singh, Satnam and Roy, P K and Ghosh, M and Mitra, A and Panda, A K (2013) Martensitic transformation and magneto-strain in melt spun NiMnGaAl Ferromagnetic Shape Memory Alloys. Intermetallics, 43 (IF-1.857). pp. 147-151.

Singh, Satnam and Roy, R K and Mahato, B and Ghosh, M and Mitra, A and Panda , A K (2014) Effect of Al incorporation for Co on the gamma-beta phase boundary of rapidly solidified CoNiAl ferromagnetic shape memory alloys. Journal of Magnetism and Magnetic Materials, 368 (IF-2.002). pp. 379-383.

Singh, Satnam and Roy, Rajat K and Ghosh, M and Manik, N B and Mitra, A and Panda, A K (2013) Modification in martensite morphology and magneto-strain through rapid solidification and heat treatment of NiMnGaAl alloy. Journal of Magnetism and Magnetic Materials, 343 (IF-1.826). pp. 169-172.

Singh, Shivangini and Mandal, Manas and Mishra, Trilochan and Angayarkanni, A and Veldurthi, N K and Pati, S S (2023) Facile Synthesis of Citric Acid Functionalized Fe3O4@Activated Carbon Magnetic Nanocomposite for Efficient Adsorption of Brilliant Green Dye from Wastewater. Chemistryselect, 8(38) .

Singh, Swarnima and Pandey, K K and Bose, S K and Keshri , A K (2020) Role of surface nanocrystallization on corrosion properties of low carbon steel during surface mechanical attrition treatment. Surface and Coatings Technology, 396 (IF-3.192). p. 125964.

Singh, Swarnima and Tiwari, S K and Singh, Raghuvir (2020) Influence of laser scanning speed on nitrided Ti6Al4V surface. Surface Engineering, 36(12): Special Issue: Laser . pp. 1285-1293.

Singh, Swarnima and Tiwary, S K and Singh, Raghubir (2018) Influence of laser scanning speed on nitrided Ti6Al4V surface. Surface Engineering, online .

Singh, T B (1999) Role of additives on the corrosion behaviour of nickel in 5% sulphuric acid. NML Technical Journal, 40 (4). pp. 171-176.

Singh, T B and Dey, A K and Gaur, B and Singh, D D N (1995) Are corrosion, hydrogen absorption and mechanical strength of steel exposed to inhibited acid solution interrelated? Anti-corrosion Methods & Materials, 42 (6). pp. 19-22.

Singh, T B and Singh, M N and Basu, D K and Narang, S K (2003) Corrosion behaviour of electro-deposited zinc-iron alloy coatings on mild steel. Journal of Metallurgy and materials Science., 45 (4). pp. 199-203.

Singh, T B and Singh, Raghuvir and Mandhyan, A K (2007) Corrosion protection of steel using waste oils. Journal of Metallurgy and Materials Science, 49 (1). pp. 51-58.

Singh, U P and Banerjee, S (1991) On the origin of pop-in crack extension. Acta metallurgica et materialia, 39 (6). pp. 1073-1083.

Singh, V and Biswas, N and Chakravarty, T and Rao, S Mohan and Banerjee, P K (2013) Exploitation of lean grade manganese ores from Joda Mines. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 59-65.

Singh, V and Das, Suchandan K (2016) Thermo-fluid Mathematical Modeling of Steel Slab Caster: Progress in 21st Century. Isij International, 56(9) (IF-1.11). pp. 1509-1518.

Singh, Vikas and Das, Suchandan K (2018) Mathematical Model and Plant Investigation to Characterize Effect of Casting Speed on Thermal and Solidification Behavior of an Industrial Slab Caster. ISIJ International, 423 . pp. 1-10.

Singh, Virendar and Adhikary, M and Venugopalan, T and Chakraborty, A and Nanda, T and Kumar, B Ravi (2017) Role of recrystallization and pearlite dissolution in industrial processing of DP590 steels. Materials and Manufacturing Processes, 32(16) (IF-2.274). pp. 1806-1816.

Singh, Y P and Dasgupta, S and Nayar, S and Bhaskar, R (2020) Optimization of electrospinning process & parameters for producing defect-free chitosan/polyethylene oxide nanofibers for bone tissue engineering. Journal of biomaterials science-polymer edition, 31(6) (IF-2.158). pp. 781-803.

Singh , Nityanand and Dinkar, Om Shankar and Choubey, Pankaj K and Panda, Rekha and Jyothi, Rajesh Kumar and Jha, Manis K (2022) Recycling of Nd-Fe-B Magnets to Reclaim Nd Salt and Pigment. Journal of Metallurgy and Materials Science, .

Singhbabu, Y N and Choudhary, Shyam K and Shukla, N and Das, S and Sahu, Ranjan K (2015) Observation of large positive magneto-resistance in bubble decorated graphene oxide films derived from shellac biopolymer: a new carbon source and facile method for morphology-controlled properties†. Nanoscale, 7 (IF-6.739). pp. 6510-6519.

Singhbabu, Y N and Kumari, Priya and Parida, Sunena and Sahu, Ranjan K (2014) Conversion of pyrazoline to pyrazole in hydrazine treated N-substituted reduced graphene oxide films obtained by ion bombardment and their electrical properties. Carbon, 74 (IF-6.160). pp. 32-43.

Singhbabu, Y N and Sahu, K K and Dadhich, D and Pramanick, A K and Mishra, T and Sahu, Ranjan K (2013) Capsule-embedded reduced graphene oxide: synthesis, mechanism and electrical properties. Journal of Materials Chemistry, 1 (IF-5.97). pp. 958-966.

Singhbabu, Y N and Sivakumar, B and Choudhary, S K and Das, S and Sahu, Ranjan K (2018) Corrosion-protective reduced graphene oxide coated cold rolled steel prepared using industrial setup: A study of protocol feasibility for commercial production. Surface and Coatings Technology, 349 (IF-3.192). pp. 119-132.

Singhbabu, Y N and Sivakumar, B and Singh, J K and Bapari, H and Pramanick, A K and Sahu, Ranjan K (2015) Efficient anti-corrosive coating of cold-rolled steel in a seawater environment using an oil-based graphene oxide ink†. Nanoscale, 7 (6.739). pp. 8035-8047.

Singla, Rashmi and Alex, T C and Kumar, Rakesh (2020) On mechanical activation of glauconite: Physicochemical changes, alterations in cation exchange capacity and mechanisms. Powder Technology, 360 (IF-4.142). pp. 337-351.

Singla, Rashmi and Kumar, Sanjay and Alex, T C (2019) Reactivity Alteration of Granulated Blast Furnace Slag by Mechanical Activation for High Volume Usage in Portland Slag Cement. Waste and Biomass Valorization . pp. 1-11.

Singla, Rashmi and Kumar, Sanjay and Alex, T C (2020) Reactivity Alteration of Granulated Blast Furnace Slag by Mechanical Activation for High Volume Usage in Portland Slag Cement. Waste and Biomass Valorization, 11 (IF-2.851). pp. 2983-2993.

Singla, Rashmi and Senna, Mamoru and Mishra, T and Alex, T C and Kumar, Sanjay (2022) High strength metakaolin/epoxy hybrid geopolymers: Synthesis, characterization and mechanical properties. Applied Clay Science, 221 .

Singla, Rashmi and Tripathy, S and Das, S K (2019) An integrated phenomenological process model for prediction of oxygen pickup during open air tapping and pouring of liquid steel. Chemical Engineering Science, 203 . pp. 391-401.

Sinha, A K and Dasgupta, P and Chakravarty, S and Bhattacharyya, G and Bhattacharjee, S (2002) Bio-accumulation of Heavy Metals in different organs of some of the Common Edible Fishes of Kharkai River, Jamshedpur. Indian Journal Environment Health, 44 (2). pp. 102-107.

Sinha, A K Mahapatra and Kar, B C (1966) Investigations on granulated cupola slag in cement making. NML Technical Journal, 8 (3). pp. 29-32.

Sinha, A N (1984) Lattice-parameters of iron-aluminum alloys. Transactions of the Japan Institute of Metals, 25 (12). pp. 900-901.

Sinha, A N and Balasundaram, L J (1965) Measurement of curie temperature by an induction method. NML Technical Journal, 7 (4). pp. 7-8.

Sinha, A N and Das, N K and Bose, S K (1983) SEM-A tool for metallurgical analysis. NML Technical Journal, 25 (1-2). pp. 1-10.

Sinha, A N and Halder, B N and Mohanty, O N (1991) Failure of a locomotive axle - a metallographic investigation - a premature failure of a locomotive axle is attributed to improper welding. Welding Journal, 70 (4). pp. 59-61.

Sinha, A N and Parida, N and Das, S and Mohanty, O N (1994) Low cycle fatigue failure of pressurised storage tank. NML Technical Journal, 36 (2). pp. 65-81.

Sinha, A N and Ranganath, V R and Das, N K and Mohanty, O N (1994) Failure analysis of an isolation valve of LPG storage tank. NML Technical Journal, 36 (3). pp. 83-94.

Sinha, A N and Sivaramakrishnan, C S (1994) Failure of work roll of cold-rolling mill. Ironmaking & Steelmaking, 21 (2). pp. 154-157.

Sinha, Arvind (2014) Biomimetic Materials. Journal of Powder Metallurgy & Mining, 3 . p. 1.

Sinha, Arvind and Agrawal, A and Das, S K and Ravi Kumar, B and Rao, Venkatesh and Ramachandrarao, P (2001) On the growth of monoclinic calcium carbonate in poly(vinyl alcohol). Journal of Materials Science Letters, 20 (17). pp. 1569-1572.

Sinha, Arvind and Agrawal, A and Nayar, S and Das, S K and Ramachandrarao, P (2002) Morphosynthesis of Calcium Carbonate in Poly(vinylalcohol). Morphosynthesis of Calcium Carbonate in Poly(vinylalcohol) , 10 (3). pp. 149-153.

Sinha, Arvind and Chakraborty, J and Das, Swapan K and Ramachandrarao, P (2003) Self-assembled growth of calcite particles on a tobacco film. Current Science , 84 (11). pp. 1437-1440.

Sinha, Arvind and Chakraborty, J and Das, Swapan K and Rao, Venkatesh and Ramachandrarao, P (2001) Oriented arrays of nanocrystalline magnetite in polymer matrix produced by biomimetic synthesis. Materials Transactions, 42 (8). pp. 1672-1675.

Sinha, Arvind and Chakraborty, J and Joy, P A and Ramachandrarao, P (2004) Magnetic field-induced biomimetic synthesis of superparamagnetic poly (vinyl alcohol)-maghemite composite. Journal of Materials Research, 19 (6). pp. 1676-1681.

Sinha, Arvind and Das, Goutam and Sharma, Binay Kumar and Roy, Raja Prabahan and Pramanick, A K and Nayar, S (2007) Poly(vinyl alcohol)–hydroxyapatite biomimetic scaffold for tissue regeneration. Materials Science and Engineering C, 27 (1). pp. 70-74.

Sinha, Arvind and Das, S K and Rao, Venkatesh and Ramachandrarao, P (2000) Synthesis of organized inorganic crystal assemblies. Current Science, 79 (5). pp. 646-648.

Sinha, Arvind and Das, Swapan K and Rao, Venkatesh and Ramachandrarao, P (2001) Biomimetic route to produce nanosized inorganic crystals. Scripta Materialia, 44 (8-9). pp. 1933-1936.

Sinha, Arvind and Das, Swapan K and Rao, Venkatesh and Ramachandrarao, P (2001) Patterning of copper particles on polymeric surface. Journal of Materials Research, 16 (5). pp. 1354-1357.

Sinha, Arvind and Das, Swapan K and Ravi Kumar, B and Chakraborty, S and Rao, Venkatesh and Ramachandrarao, P (2000) Polymer-Mediated Synthesis of Fine-Sized Cobalt Particles. Journal of Materials Synthesis and Processing, 8 (2). pp. 109-113.

Sinha, Arvind and Das, Swapan K and Vijaya Kumar, T V and Rao, Venkatesh and Ramachandrarao, P (1999) Synthesis of Nanosized Copper Powder by an Aqueous Route. Journal of Materials Synthesis and Processing, 7 (6). pp. 373-377.

Sinha, Arvind and Guha, Avijit (2009) Biomimetic patterning of polymer hydrogels with hydroxyapatite nanoparticles. Materials Science and Engineering: C, 29 (4). pp. 1330-1333.

Sinha, Arvind and Gupta, A K and Pramanick, A K and Nayar, S and Gunjan, M K and Mishra, T and Bhatt, N C and Vishwanath, N and Das, Samar (2009) Mimicking biomineralization under microgravity. Materials Science and Engineering: C, 29 (3). pp. 779-784.

Sinha, Arvind and Kannde, D (2006) Self-assembly-assisted growth of two-dimensional Penrose tiling. Philosophical Magazine Letters Online ISSN 1362-3036, 86 (2). pp. 75-80.

Sinha, Arvind and Mishra, T and Ravishankar, N (2008) Polymer assisted hydroxyapatite microspheres suitable for biomedical application. Journal of Materials Science: Materials in Medicine, 19 (5). pp. 2009-2013.

Sinha, Arvind and Nayar, S (2005) Design and synthesis of nanosized bioceramic-particles, composites and coating. Transactions Of The Indian Institute Of Metals , 58 (6). pp. 951-955.

Sinha, Arvind and Nayar, S and Agrawal, A and Bhattacharya, D (2003) Synthesis of nanosized and microporous precipitated hydroxyapatite in synthetic polymers and Biopolymers. Journal Of The American Ceramic Society , 86 (2). pp. 357-359.

Sinha, Arvind and Nayar, S and Kar, Abhijit and Gunjan, M K and Mahato, B and Das, Goutam and Kumar, Arun and Chabra, Aman (2008) Microhydrogel-Mediated Synthesis of Sintered Hydroxyapatite Granules. International Journal of Applied Ceramic Technology, 5 (5). pp. 458-463.

Sinha, Arvind and Nayar, S and Murthy, G V S and Joy, P A and Rao, Venkatesh and Ramachandrarao, P (2003) Biomimetic synthesis of superparamagnetic iron oxide particles in proteins. Journal of Materials Research, 18 (6). pp. 1309-1313.

Sinha, Arvind and Nayar, S and Nath, B K and Das, D and Mukhopadhyay, P K (2005) Magnetic field induced synthesis and self-assembly of super paramagnetic particles in a protein matrix. Colloids and Surfaces B: Biointerfaces, 43 (1). pp. 7-11.

Sinha, Arvind and Ramachandrarao, P (1995) On the grey penrose tiling. Philosophical Magazine Letters, 71 (3). pp. 207-212.

Sinha, Arvind and Ramachandrarao, P (1997) Quasiperiodic lattices. Progress in Crystal Growth and Characterization of Materials, 34 (1-4). pp. 147-156.

Sinha, Arvind and Ramachandrarao, P and Sastry, G V S (1995) Selection-rules for quasi-lattices. Current Science, 68 (6). pp. 627-631.

Sinha, D and Sahoo, K L and Sinha, U B and Swu, T and Chemseddine, A and Fink, D (2004) Gamma-induced modifications of polycarbonate polymer. Radiation Effects and Defects in Solids, 159 (10). pp. 587-595.

Sinha, Deependra Kumar and Kumar, A and Kumar, Sanjay (2014) Development of Geopolymer Concrete from Fly Ash and Bottom Ash Mixture. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 143-148.

Sinha, Deependra Kumar and Kumar, A and Kumar, Sanjay (2014) Reduction of pollution by using Fly ash, bottom ash and granulated blast furnace slag in geopolymer building materials. Scholars Journal of Engineering and Technology (SJET), 1(3) . pp. 177-182.

Sinha, I and De, P K and Srivastava, V C (2005) Mechanical working of 2124 Al alloy—SiCp cast composites. Journal of Materials Science, 40 (22). pp. 6045-6048.

Sinha, I and Mandal, R K (2002) Simulating isothermal crystallisation during phase separation of oxide glasses and the percolation behaviour of these glass-ceramics. Journal of Materials Science, 37 (24). pp. 5215-5221.

Sinha, I and Mandal, R K (2003) Simulating the effect of glass microstructures on the crystallisation and percolation behaviour of glass-ceramics. Journal of Non-Crystalline Solids, 324 (1-2). pp. 36-49.

Sinha, K M K and Sharma, T and Haldar, D D (2010) Effect of ash of raw and beneficiated coal as well as operating variables on gasification process. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), 1 (Section 6). pp. 498-501.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2012) Solvent Extraction and Separation of Copper and Zinc from a Pickling Solution. International Journal of Metallurgical Engineering, 1 (2). pp. 28-34.

Sinha, Manish K and Sahu, S K and Pramanik, S and Prasad , L B and Panday, B D (2016) Recovery of high value copper and zinc oxide powder from waste brass pickle liquor by solvent extraction. Hydrometallurgy, 165 Part 1 (IF-2.605). 182-190.

Sinha, Manish K and Pramanik, Swati and Kumari, Aarti and Sahu, S K and Prasad, L B and Jha, Manis K and Yoo, Kyoungkeun and Pandey, B D (2017) Recovery of value added products of Sm and Co from waste SmCo magnet by hydrometallurgical route. Separation and purification technology, 179 (IF-3.359). pp. 1-12.

Sinha, Manish K and Pramanik, Swati and Sahu, S K and Prasad, L B and Jha, Manis K and Pandey, B D (2016) Development of an efficient process for the recovery of zinc and iron as value added products from the waste chloride solution. Separation and Purification Technology, 167 (IF-3.359). pp. 37-44.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D (2014) Solvent extraction and separation of zinc and iron from spent pickle liquor. Hydrometallurgy, 147–148 (IF-2.224). pp. 103-111.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and prasad, L B and Pandey, B D (2015) Low temperature hydrothermal synthesis and characterization of iron oxide powders of diverse morphologies from spent pickle liquor. Powder Technology, 276 (IF-2.269). pp. 214-221.

Sinha, Manish K and Tanvar, H and Sahu, S K and Mishra, B (2023) A Review on Recovery of Terbium from Primary and Secondary Resources: Current State and Future Perspective. Mineral Processing and Extractive Metallurgy Review .

Sinha, Moni and Nistala, Harsha (2015) Microstructural analysis of sinter breakage. Journal of Metallurgy and Materials Science, 57(2) . pp. 75-82.

Sinha, Moni and Nistala, Harsha and Biswas, A (2015) Effect of inert gas injection on sinter RDI. Journal of Metallurgy and Materials Science, 57(3) . pp. 173-178.

Sinha, N and Singh, R (2014) Beneficiation and purification of a low grade and finely disseminated graphite ore. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 15-22.

Sinha, N and Singh, Ratnakar (2011) Studies on chemical processing of graphite from Palamu. Journal of Chemtracks , 13(2) . pp. 489-492.

Sinha, N and Singh, Ratnakar (2007) Synthesis of quinoline derivatives and substituted homophthalic acids for use in flotation of low grade ores. Journal of Metallurgy and Materials Science, 49 (3). pp. 175-181.

Sinha, P and Chakravarty, S and Singh, R and Singh, P K and Murthy, G V S (2019) Magnetization study of the sensitization in SS304LN. Materials Research Bulletin, 109 . pp. 149-154.

Sinha, P K and Basu, G and Aush, S C and Dhananjayan, N and Altekar, V A (1980) Recovery of non-ferrous-metals and elemental sulfur by ferric-chloride leaching of sulfide concentrates. Transactions of the Indian Institute of Metals, 33 (6). pp. 431-438.

Sinha, S K (2012) Metal foams - A novel field of metallurgy. Journal of Metallurgy and Materials Science,, 54(3) . pp. 175-185.

Sinha, S K and Godiwalla, K M and Shaw, D K and Sivaramakrishnan, C S (2001) Fluid flow behaviour in a water model tundish under open, submerged and modified inlet conditions. Scandinavian Journal Of Metallurgy, 30 (2). pp. 103-107.

Sinha, S K and Godiwalla, K M and Sivaramakrishnan, C S (1993) Fluid-flow characterization in twin strand continuous-casting tundish water model. Ironmaking & Steelmaking, 20 (6). pp. 485-492.

Sinha, S K and Rao, G N (1976) Cellular metal. NML Technical Journal, 18 (2). pp. 21-24.

Sinha, S N and Agrawal, M K and Prasad, R B (2000) Environmental problems and its control in non-ferrous metal industries. Journal of Metallurgy and Materials Science , 42 (4). pp. 255-267.

Sinha, Satish and Guha, Avijit and Sinha, Arvind (2010) Macroporous hybrid frameworks for bone graft substitute. Materials Science and Engineering: C, 30 . pp. 873-877.

Sinha, Shivendra and Abhilash, and Meshram, Pratima and Pandey, B D (2016) Metallurgical processes for the recovery and recycling of lanthanum from various resources—A review. Hydrometallurgy, 160 (IF-2.605). pp. 47-59.

Sinha, Shivendra and Choudhary, R and Mishra, D and Shekhar, Saurabh and Agrawal, A and Sahu, K K (2020) Valorisation of waste galvanizing dross: Emphasis on recovery of zinc with zero effluent strategy. Journal of Environmental Management, 256 (IF-4.865). p. 109985.

Sinha, Shivendra and De, S and Mishra, D and Shekhar, S and Agarwal, A and Sahu, K K (2022) Phosphonomethyl iminodiacetic acid functionalized metal organic framework supported PAN composite beads for selective removal of La(III) from wastewater: Adsorptive performance and column separation studies. Journal of Hazardous Materials, 425 .

Sinha, Shivendra and Mishra, D and Agrawal, A and Sahu, K K (2018) Aqueous process intensification through enhanced oxygen mass transfer using oxygen vector: An application to cleaner leaching. Journal of Cleaner Production, 176 (IF-5.715). pp. 452-462.

Sinha, THD and Prasad, R S and Kumar, Rajendra (1975) Thermoelectric-power and resistivity of Cu-In alloys at high-temperatures. Indian Journal of Pure & Applied Physics, 13 (7). pp. 443-446.

Sinhababu, S K and Sinha, S K and Rao, G N (1977) Ferro-chrome slag as harderner for sodium silicate bonded sand. NML Technical Journal, 19 (3-4). pp. 58-60.

Sircar, J K (1999) Mass spectrometry: Instrumental aspect-The source. NML Technical Journal, 40 (4). pp. 135-142.

Sircar, J K and Bhattacharjee, S and Konar, J and Ghosh, K C and Basak, A C and Jha, S N and Pandey, L P (1996) Determination of Low Amount of Chromium in Alloy Steel by an Amplification Method. Microchemical Journal, 54 (2). pp. 163-167.

Sircar, J K and Mohanta, M K and Rao, A S and Srivastava, S C (1999) Mass spectrometry: Instrumental aspect-The analyser. NML Technical Journal, 40 (2). pp. 77-83.

Sircar, J K and Mohanta, M K and Rao, A S and Srivastava, S C (1999) Mass spectrometry: Instrumental aspect-The source. NML Technical Journal, 40 (3). pp. 135-142.

Sircar, J K and Mohanta, M K and Rao, A S and Srivastava, S C (1999) Mass spectrometry: Instrumental aspect-The source. NML Technical Journal, 40 (4). pp. 143-162.

Sircar, J K and Mohanty, Ashok and Konar, J and Garain, Pijush K and Dhonge, S S (2011) Stability constant determination revisited : A voltammetric method of study of Lead-1, 10 phenanthroline complex. Journal of Metallurgy and Materials Science, 53 (1).

Sircar, J K and Rao, A S and Upadhyay, A K and Kumar, B and Srivastava, S C (2002) Principle of meta-stable defocusing in mass spectrometry. Journal of Metallurgy and materials Science., 44 (3). pp. 151-159.

Sircar, J K and Upadhyay, A K and Gupta, K K (2006) Determination of phosphorus in steel by precipitation as silverphosphate and subsequent determination by spectrophotometric method. Journal of Metallurgy and Materials Science, 47 (1). pp. 45-50.

Sirohi, S and Gupta, A and Pandey, C and Vidyarthy, R S and Guguloth, K and Natu, H (2022) Investigation of the microstructure and mechanical properties of the laser welded joint of P22 and P91 steel. Optics & Laser Technology, 147 .

Siruguri, V and Gutiérrez, J and Barandiaràn, J M and Làzpita, P and Singh, Brajendra and Sahu, Ranjan K and Sundar Manoharan, S and Henry, P and Mondelli, C (2006) Neutron diffraction evidence for double exchange coupling in Ru-substituted La0.6Pb0.4Mn1−xRuxO3, 0x0.5. Physica B: Condensed Matter, 385-386 (1). pp. 408-410.

Siva, S B V and Ganguly, R I and Rao, G S and Sahoo, K L (2015) Quantitative studies on wear behavior of Al-(Al2O3-SiC-C) composite prepared with in situ ceramic composite developed from colliery waste. Proceeding of the institution Mechanical EngineersPart J-Jornal of Engineering Tribology, 229(7) (IF-0.916). pp. 823-834.

Sivaiah, S and Rafiuddin, S and Chakravorty, N (1984) Flow properties of granular solids. NML Technical Journal, 26 (1-2). pp. 11-14.

Sivakumar, B and Pathak, L C and Singh, R (2018) Fretting corrosion response of boride coated titanium in Ringer's solution for bio-implant use: Elucidation of degradation mechanism. Tribology International, 127 (IF-3.517). pp. 219-230.

Sivakumar, B and Pathak, L C and Singh, R (2018) Fretting corrosion response of boride coated titanium in Ringer's solution for bio-implant use: Elucidation of degradation mechanism. Tribology International, 127 (IF-3.246). pp. 219-230.

Sivakumar, B and Pathak, L C and Singh, Raghuvir (2017) Role of surface roughness on corrosion and fretting corrosion behaviour of commercially pure titanium in Ringer's solution for bio-implant application. Applied Surface Science, 401 (IF-3.387). pp. 385-398.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Comparison of the fretting corrosion behaviour of Ti-6Al-4V alloy and CP-Ti IN ringer’s solution. Tribology - Materials, Interfaces and Surfaces, 5(4) (1.553). pp. 158-164.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Fretting corrosion behaviour of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions. Wear, 270 . pp. 317-324.

Sivakumar, B and Singh, Raghuvir and Pathak, L C (2015) Corrosion behavior of titanium boride composite coating fabricated on commercially pure titanium in Ringer's solution for bioimplant applications. Materials Science & Engineering C-Materials for Biological Applications, 48 (IF-2.736). pp. 243-255.

Sivaprasad, S and Bar, H N and Gupta, Suneel K and Arora, Punit and Bhasin, V and Tarafder, S (2014) A comparative assessment of cyclic deformation behaviour in SA333 Gr.6 steel using solid, hollow specimens under axial and shear strain paths. International Journal of Fatigue, 61 (IF- 1.916). pp. 76-86.

Sivaprasad, S and Narang, S K and Singh, Raghubir (2006) Failure of high pressure ammonia line in a fertilizer plant – A case study. Engineering Failure Analysis, 13 (6). pp. 867-875.

Sivaprasad, S and Narasaiah, N and Das, Swapan K and Das, Goutam and Tarafder, S and Gupta, K K and Ghosh, R N (2010) Investigation on the failure of air compressor. Engineering Failure Analysis, 17 (1). pp. 150-157.

Sivaprasad, S and Paul, Surajit Kumar and Das, Arpan and Narasaiah, N and Tarafder, S (2010) Cyclic plastic behaviour of primary heat transport piping materials: Influence of loading schemes on hysteresis loop. Materials Science and Engineering: A, 527 (26). pp. 6858-6869.

Sivaprasad, S and Paul, Surajit Kumar and Gupta, Suneel K and Bhasin, V and Narasaiah, N and Tarafder, S (2010) Influence of uniaxial ratchetting on low cycle fatigue behaviour of SA 333 Gr.6 C–Mn steel. International Journal of Pressure Vessels and Piping, 87 (8). pp. 464-469.

Sivaprasad, S and Paul, Surajit Kumar and Gupta, Suneel K and Bhasin, Vivek and Narasaiah, N and Tarafder, S (2010) Influence of uniaxial ratchetting on low cycle fatigue behviour of SA 333 Gr. 6 C–Mn steel. International Journal of Pressure Vessels and Piping, 87(8) . pp. 464-469.

Sivaprasad, S and Paul, Surajit Kumar and Narasaiah, N and Tarafder, S (2010) Experimental investigation on cyclic deformation behaviour of primary heat transport piping materials: Masing analysis of hysteresis loops. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 559-563.

Sivaprasad, S and Swaminathan, J and Tiwari, Y N and Roy, P K and Singh, Raghubir (2003) Remaining life assessment of service exposed reactor and distillation column materials of a petrochemical plant. Engineering Failure Analysis, 10 (3). pp. 275-289.

Sivaprasad, S and Tarafder, S and Das, Swapan K and Ranganath, V R and Ray, K K (2001) The role of stereology in estimation of ductile fracture toughness of structural materials. Image Analysis in Materials and Life Sciences . pp. 86-95.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Tarafder, Mita and Ray, K K (2006) Corrosion fatigue crack growth behaviour of naval steels. Corrosion Science, 48 (8). pp. 1996-2013.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Das, Swapan K and Ray, K K (2002) Effect of prestrain on stretch-zone formation during ductile fracture of Cu-strengthened high-strength low-alloy steels. Metallurgical and Materials Transactions A, 33 (12). pp. 3731-3740.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2000) Effect of prestrain on fracture toughness of HSLA steels. Materials Science and Engineering A, 284 (1-2). pp. 195-201.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2000) Fatigue crack growth studies on Cu-strengthened HSLA steels in Air and in simulated sea water. Transaction of the Indian Institute of Metals, 53 (3). pp. 333-339.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2004) Modelling ductile fracture behaviour from deformation parameters in HSLA steels. Fatigue & Fracture of Engineering Materials & Structures, 27 (10). pp. 897-909.

Sivaprasad, S and Tarafder, S and Tarafder, Mita and Ray, K K (2000) An alternative method of decreasing ΔK FCGR testing. International Journal of Fatigue, 22 (7). pp. 593-600.

Sivaramakrishnan, C S and Lal, Kishori and Mahanti, R K (1991) Characterization of rapidly solidified structures of Al-6Fe-3mm. Journal of Materials Science, 26 (16). pp. 4369-4374.

Sivaramakrishnan, C S (1973) Bearing materials-A general appraisal. NML Technical Journal, 159 (3). pp. 69-75.

Sivaramakrishnan, C S (1981) Modern concepts in solidification and structure of cast iron. NML Technical Journal, 23 (1-2). pp. 11-15.

Sivaramakrishnan, C S (2001) Solidification Processing of aluminium alloys. Journal of Metallurgy and materials Science, 43 (2). pp. 57-66.

Sivaramakrishnan, C S (1978) Stability of liquid lead base alloys: Some simple consideration. NML Technical Journal, 20 (3-4). pp. 31-34.

Sivaramakrishnan, C S (1978) Thermodynamic properties of liquid lead tin system by EMF method. NML Technical Journal, 20 (1-2). pp. 20-23.

Sivaramakrishnan, C S and Chowdhury, K M and Kumar, Rajendra (1971) Impact of melting procedures on foundry technology of aluminium. NML Technical Journal, 13 (1). pp. 1-7.

Sivaramakrishnan, C S and Kumar, Rajendra (1979) Models for liquid metals-A metallurgical appreciation. NML Technical Journal, 21 (3-4). pp. 21-24.

Sivaramakrishnan, C S and Kumar, Rajendra (1980) Models for metallic solution-liquids. NML Technical Journal, 22 (1-2). pp. 1-8.

Sivaramakrishnan, C S and Kumar, Rajendra (1976) Structure of dilute Sn-Fe liquid alloys. Transactions of the Japan Institute of Metals, 17 (6). pp. 378-382.

Sivaramakrishnan, C S and Lal, Kishori and Mahanti, R K (1993) Abatement of intergranular corrosion in zinc-aluminium foundry alloys through flux treatment. Anti-corrosion Methods & Materials, 40 (4). pp. 4-8.

Sivaramakrishnan, C S and Mahanti, R K (1984) Basics of degassing of aluminium melts. NML Technical Journal, 26 (1-2). pp. 5-10.

Sivaramakrishnan, C S and Mahanti, R K (1982) The effect of solute and melt treatment on precipitation behaviour of Al-Cu and Al-Zn-Mg alloys. NML Technical Journal, 24 (3-4). pp. 22-27.

Sivaramakrishnan, C S and Mahanti, R K and Kumar, R (1984) The dispersion of lead and graphite in aluminium alloys for bearing applications. Wear, 96 (2). pp. 121-134.

Sivaramakrishnan, C S and Mahanti, R K and Kumar, Rajendra (1982) Grain-refinement of aluminum by nml-pm122. Indian Journal of Technology, 20 (10). pp. 403-406.

Sivaramakrishnan, C S and Mahanti, R K and Kumar, Rajendra (1986) Microstructural refinement in degassed aluminum-alloys. Transactions of the Indian Institute of metals, 39 (5). pp. 492-496.

Sivaramakrishnan, C S and Mohanty, R K and Lal, Kishori (1996) Zinc-aluminium alloys for automobile applications. NML Technical Journal, 38 (3). pp. 123-126.

Sivaramakrishnan, C S and Prabhu, S M (2012) Electrical and thermal analysis of porous non-isothermal bed. Journal of Metallurgy and Materials Science, 54(1) . pp. 63-75.

Som, P K (1965) Role of the National Metallurgical Laboratory, Jamshedpur, India, in the Field of Non-ferrous Metallurgy. Bulletin of the Research Institute of Mineral Dressing and Metallurgy, 21 (1). p. 30.

Som, P K and Choudhury, S K R (1982) Studies on lime-roast-leach technique for treating chalcopyrite concentrates. Transactions of The Indian Institute Of Metals, 35 (6). pp. 578-582.

Som, P K and Roychowdhury, S K (1982) Recovery of metal values from industrial wastes. NML Technical Journal, 24(1-2) . pp. 8-11.

Som, P K and Roychowdhury, S K and Aush, S C (1977) Chlorination of magnesites. Transactions of the Indian Institute of metals, 30 (2). pp. 95-105.

Som, P K and Roychowdhury, S K and Chakrabarti, H K (1977) Preparation of anhydrous magnesium chloride in fluidised bed. NML Technical Journal, 19 (2). pp. 33-38.

Soma, Kumar K and Chowdhury, A P (1961) A photoelectric temperature controller. NML Technical Journal, 3 (3). pp. 29-31.

Somayajulu, B V and Mohan, Jatinder and Bhatnagar, S S (1961) Some aspects of silicate bonding with and without CO2. NML Technical Journal, 3 (3). pp. 15-19.

Soni, and Kumari, Swati and Sharma, S K and Mishra, Suman K (2018) Effect of Deposition Pressure, Nitrogen Content and Substrate Temperature on Optical and Mechanical Behavior of Nanocomposite Al-Si-N Hard Coatings for Solar Thermal Applications. Journal of Materials Engineering and Performance, 27(12) (IF-1.094). pp. 6729-6736.

Soni, and Mishra, Suman K and Sharma, S K (2019) Influence of nitrogen partial pressure on optical properties of magnetron sputtered Al-Si-N thin films. Thin Solid Films, 682 . pp. 1-9.

Soni, and Sharma, S K and Mishra, Suman K (2020) The effect of Si content on structural, mechanical and optical behaviour of magnetron sputtered Al–Si–N nanocomposite thin films. Journal of Alloys and Compounds, 831 (IF-4.175). p. 154686.

Soni, and Shekh, M J and Sharma, S K and Mishra, Suman K (2020) Strain rate sensitivity behaviour of the thin films of Al, Al-Si and nanocomposite Al-Si-N: A comparative study. Materials Characterization, 169 (IF-3.562).

Soupramanien, C and Swaminathan, J (2014) Failure analysis of refractory anchors of powder boiler. Procedia Engineering, 86 (NIF-0.629). pp. 919-925.

Sreedevi, P and Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2011) Studies on the Zetapotential of Calcite/p-Sulfonatocalix[ 4,8]arenes. Journal of Dispersion Science and Technology, 32 . pp. 1531-1536.

Sreedevi, P and Chennakesavulu, K and Kavitha, M and Bhaskar Raju, G and Prabhakar, S (2011) Electrokinetic behavior of Fluorite. Journal of Dispersion Science and Technology, 32 . pp. 1306-1310.

Sridhar, G and Das, Swapan K and Mukhopadhyay, N K (1999) Failure analysis of low carbon free-cutting steel wire rods. Engineering Failure Analysis, 6 (3). pp. 155-172.

Sridhar, G and Sarma, D S (1989) Structure and properties of a beta-solution treated, quenched, and aged Si-bearing near-alpha titanium-alloy. Metallurgical Transactions A-Physical Metallurgy and Materials Science, 20 (1). pp. 55-62.

Sridhar, G and Sarma, D S (1988) Structure and properties of a near-alpha titanium-alloy after beta-solution treatment and aging at 625-degrees-c. Metallurgical transactions a-physical metallurgy and materials science, 19(12) . pp. 3025-3033.

Srikanth, S (1992) Calculation of viscosity from the associated solution model - discussion. Metallurgical Transactions B-Process Metallurgy , 23 (1). pp. 101-103.

Srikanth, S (1991) Estimation of volumes of mixing and calculation of the liquidus curve from the modified associated solution model. Zeitschrift fur metallkunde, 82 (11). pp. 841-845.

Srikanth, S (2015) Some recent technological achievements of CSIR-National Metallurgical Laboratory. Current Science, 108(11) . pp. 2014-2016.

Srikanth, S and Alex, T C and Premchand, (1999) Reduction roasting of central Indian Ocean nodules by use of fuel oil: a thermodynamic and kinetic analysis. Transactions of the Institution of mining and metallurgy section c-mineral processing and extractive metallurgy, 108 ( ). C138-C146.

Srikanth, S and Chakravorty, M (2001) Non-isothermal thermoanalytical studies on the salt roasting of chalcopyrite using KCl. Thermochimica Acta, 370 (1-2). pp. 141-148.

Srikanth, S and Chakravorty, M (2001) Thermoanalytical studies on the salt roasting of chalcopyrite using KCl. Analytical Chemistry (including News & Features), 370 (1-2). pp. 141-148.

Srikanth, S and Chattopadhyay, S (1992) Thermodynamic calculation of phase-equilibria in the Al-Ge-Zn system. Thermochimica Acta, 207 (29-44). pp. 29-44.

Srikanth, S and Chattopadhyay, S (1993) Volume effects and complexing in liquid K-Pb alloys. Canadian Metallurgical Quarterly , 32 (2). pp. 103-107.

Srikanth, S and Das, Swapan K and Ravi Kumar, B and Rao, D S and Nandakumar, K and Vijayan, P (2004) Nature of fireside deposits in a bagasse and groundnut shell fired 20 MW thermal boiler. Biomass and Bioenergy, 27 (4). pp. 375-384.

Srikanth, S and Das, Swapan K and Sasikumar, C and Ravi Kumar, B (2007) Failure of evaporator tubes initiated by lamellar tearing during the commissioning of a waste heat recovery boiler. Engineering Failure Analysis, 14 (1). pp. 262-278.

Srikanth, S and Goel, R P and Ramachandrarao, P (1999) Limitations of a regular associated solution approximation in describing the thermodynamic behaviour of complex liquid alloys. Calphad, 23 (1). pp. 85-100.

Srikanth, S and Gopalakrishna, K and Das, Swapan K and Ravi Kumar, B (2003) Phosphate induced stress corrosion cracking in a waterwall tube from a coal fired boiler. Engineering Failure Analysis, 10 (4). pp. 491-501.

Srikanth, S and Jacob, K T (1989) Activities in Liquid Ga-Te alloys at 1120 K. Thermochimica acta, 153 ( ). pp. 27-35.

Srikanth, S and Jacob, K T (1989) Extention of Darken's Quadric Formalism to Dilute Multicomponent solutions. ISIJ International, 29 (2). pp. 171-174.

Srikanth, S and Jacob, K T (1988) Thermodynamic consistency of the Interaction Parameter Formalism. Metallurgical and Materials Transaction B, 19 (2). pp. 269-275.

Srikanth, S and Jacob, K T (1989) Thermodynamic Properties of Copper-Nickel Alloys Measurments and Assessment. Materials Science Technology, 5 (5). pp. 427-434.

Srikanth, S and Jacob, K T (1991) Thermodynamics of Aluminium Strontium Alloys. Zeitschrift fur Metallkunde, 82 (9). pp. 675-683.

Srikanth, S and Jacob, K T (1991) Thermodynamics of Aluminium-Barium Alloys. Metallurgical and Materials Transactions, 22 (5). pp. 606-616.

Srikanth, S and Jacob, K T (1991) Vapor-Pressure of Calcium Corresponding to the Reduction of Calcia by Aluminium. Transactions of the Indian Institute of Metals, 44 (5). pp. 369-373.

Srikanth, S and Jacob, K T (1988) Volume Effects and Associations in Liquid Alloys. Metallurgical and Materials Transaction B, 19 (3). pp. 465-470.

Srikanth, S and Jacob, K T and Abraham, K P (1989) Representation of Thermodynamic Proprerties of Dilute Multi-Component Solutions-- Options and Constraints. Steel Research, 60 (1). pp. 6-11.

Srikanth, S and Jacob, K T and Iyengar, G N K (1990) Phase Equilibria in the Co-Ni-F System and Activities in (CoXNi1-X)F2 Solid solutions at 1373 K. High Temperature Science, 30 (1). pp. 11-18.

Srikanth, S and laxmi, V Devi and Kumar, Rakesh (2015) Unfolding the complexities of mechanical activation assisted alkali leaching of zircon (ZrSiO4). Hydrometallurgy, Available online 10 December 2015 . (In Press)

Srikanth, S and Laxmi Devi, V and Kumar, Rakesh (2016) Unfolding the complexities of mechanical activation assisted alkali leaching of zircon (ZrSiO4). Hydrometallurgy, 165(1) (IF-2.605). pp. 125-136.

Srikanth, S and Petric, A (1994) Optimization and calculation of the Fe-Ta phase diagram. Journal of Alloys and Compounds, 203 . pp. 281-288.

Srikanth, S and Ramachandrarao, P (1998) Construction and application of metastability field diagrams for non-equilibrium processing of alloys. International Journal of Non-equilibrium processing, 10 (3-4). pp. 219-239.

Srikanth, S and Ramachandrarao, P and Chvoj, Z (2000) Limits of constitutional undercooling and interfacial liquid compositions during steady-state directional solidification of binary alloys at various interface velocities. Journal of Crystal Growth, 208 (1-4). pp. 779-785.

Srikanth, S and Rao, D S and Das, Swapan K and Ravi Kumar, B and Nandakumar, K and Dhanuskodi, R and Vijayan, P (2003) Combustion and deposit formation behavior on the fireside surfaces of a pulverized fuel boiler fired with a blend of coal and petroleum coke. Combustion Science and Technology, 175 (9). pp. 1625-1647.

Srikanth, S and Ravi Kumar, B and Das, Swapan K and Gopalakrishna, K and Nandakumar, K and Vijayan, P (2003) Analysis of failures in boiler tubes due to fireside corrosion in a waste heat recovery boiler. Engineering Failure Analysis, 10 (1). pp. 59-66.

Srikanth, S and Ray, Ajoy K and Bandopadhyay, A and Ravi Kumar, B and Jha, Animesh (2005) Phase constitution during sintering of red mud and red mud–fly ash mixtures. Journal of the American Ceramic Society, 88 (9). pp. 2396-2401.

Srikanth, S and Sankara Narayanan, T S N and Gopalakrishna, K and Narasimhan, B R V (2005) Corrosion in a buried pressurised water pipeline. Engineering Failure Analysis, 12 (4). pp. 634-651.

Srikanth, S and Sanyal, D and Ramachandrarao, P (1996) A re-evaluation of the Al---Ge system. Calphad, 20 (3). pp. 321-332.

Srikanth, S and Srinivasan, V S and Jacob, K T and Allibert , M (1991) Alloy-oxide Equilibria in the System Ca-AI-O at 1373-K. Revenue Internationale des Hautes Temperatures et des Refractaires, 27 (3). pp. 131-139.

Srikanth , S and Jacob, K T (1989) A Modified Least Squares Algorithm to Treat Associations in Liquid Alloys. Calphad, 13 (2). pp. 149-158.

Srikrishna, T L and Bhatnagar, P P (1963) Production of high carbon ferro-chrome. NML Technical Journal, 5 (4). pp. 17-21.

Srinivasa Rao, D and Rajalaxmi, M and Vasumathi, N and Bhima Rao, R (2010) Beneficiation studies on beach placer sample for steel making industries. Journal of Mining and Metallurgy Section A: Mining, 46 A . pp. 11-21.

Srinivasan, A and Ajithkumar, K K and Swaminathan, J and Pillai, U T S and Pai, B C (2013) Creep Behavior of AZ91 Magnesium Alloy. Procedia Engineering, 55 . pp. 109-113.

Srinivasan, A and Ghosh Chowdhury, S and Srivastava, V C and Swaminathan, J and Poddar, Palash and De, P K (2007) Microstructural and textural evolution during large strain hot rolling (LSR) of Mg–Al (AZ31) alloy. Materials Science and Technology, 23 (11). pp. 1313-1320.

Srinivasan, A and Ningshen, S and Mudali, U Kamachi and Pillai, U T S and Pal, B C (2007) Influence of Si and Sb additions on the corrosion behavior of AZ91 magnesium alloy. Intermetallics, 15 (12). pp. 1511-1517.

Srinivasan, A and Pillai, U T S and Pal, B C (2007) Effect of Pb addition on ageing behavior of AZ91 magnesium alloy. Materials Science and Engineering A, 452-453 . pp. 87-92.

Srinivasan, A and Pillai, U T S and Swaminathan, J and Das, Swapan K and Pal, B C (2006) Observations of microstructural refinement in Mg–Al–Si alloys containing strontium. Journal of Materials Science, 41 (18). pp. 6087-6089.

Srinivasan, A and Pillai, U T S and Swaminathan, J and Pai, B C (2006) Enhanced high temperature properties of low pressure cast AZ91 Mg alloy. International Journal of Cast Metals Research, The, 19 (5). pp. 265-268.

Srinivasan, A and Swaminathan, J and Gunjan, M K and Pillai, U T S and Pal, B C (2010) Effect of intermetallic phases on the creep behavior of AZ91 magnesium alloy. Materials Science and Engineering: A, 527 (6). pp. 1395-1403.

Srinivasan, A and Swaminathan, J and Pillai, U T S and Guguloth, K and Pal, B C (2008) Effect of combined addition of Si and Sb on the microstructure and creep properties of AZ91 magnesium alloy. Materials Science and Engineering A, 485 (1-2). pp. 86-91.

Srinivasan, K V and Altekar, V A (1970) Studies on inhibitors for packaging & storage. NML Technical Journal, 12 (2). pp. 33-39.

Srinivasan, S R (1974) Seminar on bacterial leaching. Chemical & Engineering News, 33 (1). pp. 11-14.

Srinivasan, S R and Bhatnagar, P P (1971) Fluidized bed roasting of zinc sulphide concentrates-some equilibrium considerations. NML Technical Journal, 13 (2). pp. 42-48.

Srinivasan, S R and Singh, Gurdial and Kar, B C (1959) Battery Active Manganese Dioxide from Low Grade Manganese ores by Chemical Process. NML Technical Journal, 1 (3). pp. 33-36.

Srivastava, A and Kamaraj, A and Mandal, K and Mandal, G K (2021) Role of Synthetic Slag Treatment on the Morphology of Non-Metallic Inclusions and Subsequent Cold Drawability of the High Carbon Wire Rod Steel. Metals and materials international .

Srivastava, A K and Patel, N K and Ravi Kumar, B and Sharma, A and Ahn, Byungmin (2020) Strength-Ductility Trade-Off in Dual-Phase Steel Tailored via Controlled Phase Transformation. Journal of Materials Engineering and Performance, 29 . pp. 2783-2791.

Srivastava, A K and Srivastava, V C and Gloter, A and Ojha, S N (2006) Microstructural features induced by spray processing and hot extrusion of an Al–18% Si–5% Fe–1.5% Cu alloy. Acta Materialia, 54 (7). pp. 1741-1748.

Srivastava, B N (2010) Analysis of iron ore by axios-advanced x-ray fluorescence spectrometer using potassium pyro-sulphate fusion technique. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 47-50.

Srivastava, J P and Pathak, P N (2000) Pre-concentration: a necessary step for upgrading tungsten ore. International Journal of Mineral Processing, 60 (1). pp. 1-8.

Srivastava, Nidhi and Dhal, B and Abhilash, and Pandey, B D (2014) Bioreduction of hexavalent chromium by Bacillus cereus isolated from chromite mine overburden soil. Advanced Materials Research, 828 . pp. 81-91.

Srivastava, R R and Mishra, A N and Singh, V K (2013) Co-precipitation study of nickel and cobalt from ammoniacal leach liquor of laterite ore. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 67-72.

Srivastava, Rajiv Ranjan and Kim, Min-seuk and Lee, Jae-chun and Jha, Manis K and Kim, Byung-Su (2014) Resource recycling of superalloys and hydrometallurgical challenges. Journal of Material Science, 49(14) (IF-2.599). pp. 4671-4686.

Srivastava, S C and Das, A N and Pandey, L P and Ram, S (1995) X-ray fluorescence study of fine powders of wolframite ores with SiO2 and WO3 major phases. Journal of Materials Science, 30 (24). pp. 6303-6308.

Srivastava, S C and Ghosh, M K (1976) X-ray spectrometric analysis of low alloy steels. NML Technical Journal, 18 (3). pp. 34-38.

Srivastava, S C and Ghosh, N and Pandey, L P (1993) An approach to the multi element analysis of sea-nodules by wavelength dispersive X-ray fluorescene Spectrometry. NML Technical Journal, 35 (3-4). pp. 45-54.

Srivastava, S C and Godiwalla, K M and Banerjee, M K (1997) Fuel ash corrosion of boiler and superheater tubes. Journal of Materials Science, 32 (4). pp. 835-849.

Srivastava, S C and Godiwalla, K M and Das, A N and Pandey, L P (1994) Particle size effect on X-ray fluorescence intensity in some binary mixtures. NML Technical Journal, 36 (1). pp. 9-15.

Srivastava, S C and Godiwalla, K M and Das, A N and Pandey, L P (1994) Recovery of copper and zinc from scrap leaded brass. NML Technical Journal, 36 (1). pp. 1-9.

Srivastava, S C and Mishra, Purusottam Narayana and Mahato, D K (2002) Determination of the combined state of atoms of lighter elements with the help of X-ray fluorescence spectrometry. Journal of Metallurgy and materials Science., 44 (1). pp. 51-58.

Srivastava, S C and Pandey, L P (1994) Auger electron spectroscopy in metallurgical research. NML Technical Journal, 36 (4). pp. 125-143.

Srivastava, S C and Subhashini, B (1975) A note on the analysis of nickel in the nickel complex with the help of x-ray fluorescence. NML Technical Journal, 17 (2). pp. 21-22.

Srivastava, V C and Ellendt, N and Meyer, C and Uhlenwinkel, V (2014) Bulk synthesis of amorphous and nano-crystalline materials by spray forming. Materialwissenschaft und Werkstofftechnik, 45(8) (IF-0.505). pp. 744-757.

Srivastava, V C and Ghosal, P (2002) Microstructure and phase formation in spray-deposited Al–18%Si–5%Fe–1.5%Cu alloy. Materials Letters, 56 (5). pp. 797-801.

Srivastava, V C and Ghosal, P and Ojha, S N (2002) Microstructure and phase formation in spray-deposited Al-18%Si-5%Fe-1.5%Cu alloy. Materials Letters, 56 (5). pp. 797-801.

Srivastava, V C and Ghosal, P and Ojha, S N (2002) Microstructure and phase formation in spray-deposited Al-18%Si-5%Fe-1.5%Cu alloy. Materials Letters, 56 (5). pp. 797-801.

Srivastava, V C and Jindal, Vikas and Uhlenwinkel, V and Bauckhage, K (2008) Hot-deformation behaviour of spray-formed 2014 Al + SiCP metal matrix composites. Materials Science and Engineering A, 477 (1-2). pp. 86-95.

Srivastava, V C and Mandal, G K and Ciftci, N and Uhlenwinkel, V and Madler, L (2017) Processing of High-Entropy AlCoCr0.75Cu0.5FeNi Alloy by Spray Forming. Journal Of Materials Engineering And Performance, 26/12 (IF- 1.331). pp. 5906-5920.

Srivastava, V C and Mandal, R K and Ojha, S N (2004) Evolution of microstructure in spray formed Al–18%Si alloy. Materials Science and Engineering A, 383 (1). pp. 14-20.

Srivastava, V C and Mandal, R K and Ojha, S N (2001) Microstructural evolution during spray forming of an Al-18Si alloy. Journal of Materials Science Letters, 20 . pp. 27-29.

Srivastava, V C and Mandal, R K and Ojha, S N (2001) Microstructure and mechanical properties of Al–Si alloys produced by spray forming process. Materials Science and Engineering, 304-306 . pp. 555-558.

Srivastava, V C and Mandal, R K and Ojha, S N and Venkateswarlu, K (2007) Microstructural modifications induced during spray deposition of Al–Si–Fe alloys and their mechanical properties. Materials Science and Engineering A, 471 (1-2). pp. 38-49.

Srivastava, V C and Ojha, S N (2006) Effect of aspiration and gas–melt configuration in close coupled nozzle on powder productivity. Powder Metallurgy, 49 (3). pp. 213-218.

Srivastava, V C and Ojha, S N (2005) Microstructure and electrical conductivity of Al-SiCp composites produced by spray forming process. Bulletin of Materials Science, 28 (2). pp. 125-130.

Srivastava, V C and Ojha, S N (2004) Microstructure and wear characteristics of spray formed and hot extruded Al–Si alloys. Materials Science and Technology, 20 . pp. 1632-1638.

Srivastava, V C and Poddar, Palash and Rajnikanth, V and Sahoo, K L (2012) Light metals research - Legacy and current standing. Science & Culture, 78(11-12) . pp. 527-531.

Srivastava, V C and Rudrakshi, G B and Uhlenwinkel, V and Ojha, S N (2009) Wear characteristics of spray formed Al-alloys and their composites. Journal of Materials Science (9). pp. 2288-2299.

Srivastava, V C and Saarivirta, E H and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2014) Bulk synthesis by spray forming of Al–Cu–Fe and Al–Cu–Fe–Sn alloys containing a quasicrystalline phase. Journal of Alloys and Compounds, 597 (IF-2.407). pp. 258-268.

Srivastava, V C and Sahoo, K L (2006) Metallic Foams : Current Status and Future Prospects. IIM Metal News, 9 (4). pp. 9-13.

Srivastava, V C and Sahoo, K L (2007) Processing, stabilization and applications of metallic foams. Art of science. Materials Science - Poland, 25 (3). pp. 735-753.

Srivastava, V C and Scheider, A and Uhlenwinkel, V and Bauckhage, K (2005) Spray processing of 2014-Al + SiCP composites and their property evaluation. Materials Science and Engineering A, 412 (1-2). pp. 19-26.

Srivastava, V C and Scheider, A and Uhlenwinkel, V and Ojha, S N and Bauckhage, K (2004) Age-hardening characteristics of Cu–2.4Ni–0.6Si alloy produced by the spray forming process. Journal of Materials Processing Technology, 147 . pp. 174-180.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of porosity and reinforcement content on the electrical conductivity of spray formed 2014-Al alloy + SiCp composites. Journal of Materials Science, 39 (22). pp. 6821-6825.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of thermomechanical treatment on spray formed Cu–Ni–Si alloy. Materials Science and Technology, 20 . pp. 839-848.

Srivastava, V C and Shukla, P and Ojha, S N (2001) Microstructural features induced by spray forming process. Journal of Metallurgy and materials Science, 43 (2). pp. 77-91.

Srivastava, V C and Singh, T and Ghosh Chowdhury, S and Jindal, Vikas (2012) Microstructural Characteristics of Accumulative Roll-Bonded Ni-Al-Based Metal-Intermetallic Laminate Composite. Journal of Materials Engineering and Performance, 21(9) . pp. 1912-1918.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Schulz, A and Rosenauer, A and Zoch, W and Eckert, J (2009) Spray forming of bulk Al85Y8Ni5Co2 with co-existing amorphous, nano- and micro-crystalline structures. Transactions of the Indian Institute of Metals, 62 (4-5). pp. 331-335.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Eckert, J and Rosenauer, A and Zoch, H -W (2010) Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming. Materials Science and Engineering A, 527 (10-11). pp. 2747-2758.

Srivastava, V C and Surreddi, K B and Scudino, S and Uhlenwinkel, V and Schowalter, M and Schulz, A and Eckert, J and Rosenauer, A and Zoch, H -W (2013) Microstructural characteristics of spray formed and heat treated Al–(Y, La)–Ni–Co system. Journal of Alloys and Compounds, 578 (IF-2.390). pp. 471-480.

Srivastava, V C and surreddi, K B and Uhlenwinkel, V and Schulz, A and Eckert, J and Zoch, H -W (2009) Formation of Nanocrystalline Matrix Composite during Spray Forming of Al83La5Y5Ni5Co2. Metallurgical and Materials Transactions A, 40 (2). pp. 450-461.

Srivastava, V C and Uhlenwinkel, V (2013) Application Oriented New Materials by Spray Forming. The Banaras Metallurgist, 18 . pp. 21-29.

Srivastava, V C and Uhlenwinkel, V and Schulz, A and Zoch, H -W and Mukhopadhyay, N K and Ghosh Chowdhury, S (2008) Synthesis of single phase i-AlCuFe bulk quasicrystal by spray forming. Zeitschirft fuer Kristallographie, 223 . pp. 711-715.

Srivastava, V C and Upadhyay, A and Ojha, S N (2001) Microstructural features induced by spray forming of a ternary Pb–Sn–Sb alloy. Bulletin of Materials Science, 23 (2). pp. 73-78.

Stephen, A and Ananth, M V and Ravichandran, V and Narasimhan, B R V (2000) Magnetic properties of electrodeposited nickel-manganese alloys: Effect of Ni/Mn bath ratio. Journal of Applied Electrochemistry, 30 (11). pp. 1313-1316.

Subrahmanyam, N and Ganguly, R G and Subramanian, M (1973) Solid state nitrogenation of carbon-free ferro-chromium. NML Technical Journal, 15 (1). pp. 10-16.

Subrahmanyam, T V and Khangaonkar, P R (1982) Adsorption and desorption studies - chalcopyrite-xanthate system. Anais da academia brasileira de ciencias, 54 (1). p. 265.

Subrahmanyam, T V and Khangaonkar, P R (1983) Xanthate adsorption on chalcopyrite. Anais da academia brasileira de ciencias, 55 (3). pp. 287-291.

Subramania, A and Angayarkanni, N and Sathiyapriya, A R and Vasudevan, T (2005) Synthesis and electrochemical characterization of nano-crystalline LiCoO2 powder by a novel sol-gel thermolysis process for Li-ion batteries. Journal of Metallurgy and Materials Science, 47 (2). pp. 85-90.

Subramanyam, AV and Altekar, V A and Narasimhan, M D (1980) Alkali attack by molten-salts on alumino-silicate samples. Refractories Journal (3). pp. 12-19.

Sujatha, G and Sinha, Arvind and Singh, Sashi (2011) Cells Behaviour in Presence of Nano-Scaffolds. Journal of Biomedical Nanotechnololgy, 7 (1). pp. 43-44.

Sundara Bharathy , R and Venugopalan, T and Ghosh, M (2023) Efect of Precipitation Characteristics on Mechanical Properties and Stretch Flangeability of Nano‑Dispersion Strengthened High Strength Ferritic Steel. Metallography, Microstructure & Analysis .

Sundarapandiyan, S and Raju, G B and Chandrasekaran, B and Saravanan, P (2018) Removal Of Organic Materials From Tannery Wastewater Containing Ammonia For Reuse Using Electro-Oxidation. Environmental Engineering And Management Journal, 17(9) (IF-1.186). pp. 2157-2164.

Sundarapandiyan, S and Renitha, T S and Sridevi, J and Saravanan, P and Chandrasekaran, B and Bhaskar Raju, G (2017) Photocatalytic degradation of highly refractive phenolic polymer Mechanistic insights as revealed by Electron Spin Resonance (ESR) and solid-state C-13 NMR spectroscopy. Chemical Engineering Journal, 313 (IF-6.216). pp. 1112-1121.

Sundaresan, S and Albert, S K and Sireesha, M and Swaminathan, J and Kamaraj, M (2005) Stress rutpure behavior of transition joints between modified Kr-Mo steel and 316 L(N) SS. Transactions Of The Indian Institute Of Metals , 58 (2-3). pp. 493-499.

Suresh, N and Selvapandiyan, M and Arumugam, J and Sudhakar, S (2019) Crystal growth, structural, optical, magnetic and thermal properties of pure and thiourea doped L-alanine single crystals for nonlinear optical applications. Journal of Metallurgy and Materials Science, 61(1) . pp. 1-9.

Suresh, S and Viswanathan, N N (2015) Hydrogen reduction of single pellet nickel oxide under microwave irradiation. Journal of Metallurgy and Materials Science, 57(4) . pp. 257-264.

Suresh, S and Viswanathan, N N (2013) Microwave mineral processing : A challenge in process intensification. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 141-148.

Surreddi, K B and Srivastava, V C and Scudino, S and Sakaliyska, M and Uhlenwinkel, V and Kim, Joon-Soo and Eckert, J (2010) Production of high-strength Al85Y8Ni5Co2 bulk alloy by spark plasma sintering. Journal of Physics: Conference Series, 240 . 012155.

Suvarna, Kripa M and Udupa, K. Rajendra and Surendranathan, A O (2013) Corrosion studies on 316L fusion zone and base metal in natural sea water by weight loss method. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 219-226.

Swain, Basudev and Mishra, Chinmayee and Jeong, Jinki and Lee, Jae-chun and Hong, Hyun Seon and Pandey, B D (2015) Separation of Co(II) and Li(I) with Cyanex 272 using hollow fiber supported liquid membrane: A comparison with flat sheet supported liquid membrane and dispersive solvent extraction process. Chemical Engineering Journal, 271 (IF-4.058). pp. 61-70.

Swain, M and Borad, D and Patel, K and Lodhari, D and Vaish, Ashok Kumar (2018) Development of high strength micro-alloyed forged steel. Journal of Metallurgy and materials Science, 60(4) . pp. 211-220.

Swain, S K and Sen, S (2011) Study of microstructure of thick wall ductile iron castings. Journal of Metallurgy and Materials Science, 53 (2). pp. 133-137.

Swaminathan, J and Guguloth, K and Gunjan, M K and Roy, P K and Ghosh, R N (2008) Failure analysis and remaining life assessment of service exposed primary reformer heater tubes. Engineering Failure Analysis, 15 (4). pp. 311-331.

Swaminathan, J and Prasad, Prabha and Gunjan, M K and Guguloth, K and Roy, P K and Singh, Raghubir and Ghosh, R N (2008) Mechanical strength and microstructural observations for remaining life assessment of service exposed 24Ni–24Cr–1.5Nb cast austenitic steel reformer tubes. Engineering Failure Analysis , 15 (6). pp. 723-735.

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Chattoraj, I (2009) Failure analysis of air pre-heater tubes of a petrochemicals plant. Engineering Failure Analysis, 16 (7). pp. 2371-2381.

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Mahato, B (2011) Sensitization induced stress corrosion failure of AISI 347 stainless steel fractionator furnace tubes. Engineering Failure Analysis, 18 (8). pp. 2211-2221.

Szabo, R and Kristaly, Ferenc and Nagy, S and Singla, Rashmi and Mucsi, Gabor and Kumar, Sanjay (2023) Reaction, structure and properties of eco-friendly geopolymer cement derived from mechanically activated pumice. Ceramics International, 49(4) . pp. 6756-6763.

Tamaki, Kiheji (1964) New method for treatment of waste pickling acid. NML Technical Journal, 6 (1). pp. 45-49.

Tammishetti, V and Rai, B and Ravi Kumar, B and Kumar, Rakesh and Pradip, (2016) Quantitative Estimation of Mineral Phases from Chemical Assays and Powder X-Ray Diffraction Rietveld Analysis: A Case Study on Selective Flocculation of Iron Ore Slimes. Transaction of the Indian Institute Metals, 69(1) (IF-0.533). pp. 125-133.

Tandon, D S and Basu, B B (1969) High speed chromium plating. NML Technical Journal, 11 (2). p. 21.

Tandon, D S and Gupta, J R (1961) Non-metallic inclusions-their quantitative extraction from Steel. NML Technical Journal, 3 (3). pp. 20-24.

Tandon, D S and Saha, A K and Mahanty, M S and Bhatnagar, P P (1971) Studies on ammoniacal pressure leaching of bulk Ni-Cu-Mo sulphide concentrate. NML Technical Journal, 13 (4). pp. 87-92.

Tarafder, Mita and Chattoraj, I and Nasipuri, M and Mitra, A (2009) Magnetic characterization of HSLA steel by power-law decay exponents of Barkhausen emission signal. Journal of Magnetism and Magnetic Materials, 321 (8). pp. 1034-1038.

Tarafder, Mita and Chattoraj, I and Nasipuri, M and Tarafder, S and Das, S K (2010) Fractal Analysis of Microstructural Images For Evaluation of HSLA Steel. TMS 2010 139th Annual Meeting & Exhibition - Supplemental Proceedings, 2 . pp. 567-276.

Tarafder, Mita and Chattoraj, I and Tarafder, S and Nasipuri, M (2009) Fractal Analysis to Determine Self-Similar Characteristics in the Microstructure of HSLA Steel. Materials and Manufacturing Processes, 24 . pp. 145-149.

Tarafder, Mita and Chattoraj, I and Tarafder, S and Nasipuri, M (2009) Self-similar and self-affine characteristics of microstructural images of HSLA steel. Materials Science and Technology, 25 (4). pp. 542-548.

Tarafder, Mita and Dey, Swati and Dash, Byomkesh and Sivaprasad, S and Tarafder, S (2004) Initiation fracture toughness of HSLA steel through automatic measurement of stretch zone. Materials Science and Technology, 20 (12). pp. 1531-1537.

Tarafder, Mita and Dey, Swati and Sivaprasad, S and Tarafder, S and Nasipuri, M (2005) Stretch-zone analysis by image processing for the evaluation of initiation fracture toughness of a HSLA steel. Zeitschrift für Metallkunde, 96 (8). pp. 924-932.

Tarafder, Mita and Ranganath, V R and Tarafder, S and Ghosh, R N (1995) Fatigue life prediction software for engineering components. NML Technical Journal, 37 (2). pp. 43-52.

Tarafder, Mita and Sinha, Pankhuri and Kundu, Amrita and Strangwood, M and Davis, Claire (2013) Fractal based correlations for Nb microalloyed steel undergoing static recrystallization. Materials Characterization, 85 . pp. 92-99.

Tarafder, Mita and Sujata, M and Ranganath, V R and Tarafder, S and Bhumik, S K (2013) Microstructural Damage Evaluation in Ni-based Superalloy Gas Turbine Blades by Fractal Analysis. Procedia Engineering, 55 . pp. 289-294.

Tarafder, Mita and Tarafder, S and Ranganath, V R (1997) Location independent CCL relations for standard fracture mechanics specimens. International Journal of Fatigue, 19 (8-9). pp. 635-640.

Tarafder, Mita and Tarafder, S and Ranganath, V R and Ghosh, R N (1997) Finite element solutions for stress intensity factors in longitudinally cracked cylindrical components. International Journal of Pressure Vessels and Piping, 70 (2). pp. 127-133.

Tarafder, Mita and Das, S K and Chattoraj, I and Nasipuri, M and Tarafder, S (2010) Fractal-based quantification of crack paths for determination of effective microstructural length scales and fracture toughness. Scripta Materialia, 62 (2). pp. 109-112.

Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2003) Ductile fracture behaviour of primary heat transport piping material of nuclear reactors. Sadhana, 28 (1-2). pp. 167-186.

Tarafder, S and Ranganath, V R and Tarafder, Mita (1994) Development of fracture mechanics expression by finite element analysis. NML Technical Journal, 36 (4). pp. 145-155.

Tarafder, S and Sivaprasad, S and Ranganath, V R (2007) Comparative assessment of fatigue and fracture behaviour of cast and forged railway wheels. Fatigue and Fracture of Engineering Materials and Structures, 30 (9). pp. 863-876.

Tarafder, S and Sivaprasad, S and Ray, K K (2007) Ductile fracture behaviour of primary heat transport piping material. Materials Science and Technology, 23 (11). pp. 1285-1293.

Tarafder, S and Tarafder, Mita and Ranganath, V R (1994) Compliance crack length relations for the 4-point bend specimen. Engineering Fracture Mechanics, 47 (6). p. 901.

Tarafder, S and Tarafder, Mita and Ranganath, V R (1994) Compliance crack length relations for the four-point bend specimen. Engineering Fracture Mechanics, 47 (6). pp. 901-907.

Tarafder, S and Tarafder, Mita and Ranganath, V R (1996) Fracture mechanics expressions for the standard chord-supported arc bend specimen. Journal of Testing and Evaluation, 24 (2). pp. 73-79.

Teremova, M I and Petrakovskaya, E A and Romanchenko, A S and Tuzikov, F V and Gurevich, Y L and Tsibina, O V and Yakubailik, E K and Abhilash, (2016) Ferritization of industrial waste water and microbial synthesis of iron-based magnetic nanomaterials from sediments. Environmental Progress & Sustainable Energy, 35(5) (IF-1.672). pp. 1407-1414.

Tewari, C R and Prakash, Ved (1969) Phase changes in Mn1.11 Al 0.89 alloy and their effects on magnetic properties. NML Technical Journal, 11 (3). pp. 18-20.

Tewari, C R and Pramanick, P and Rao, Venkatesh and Mohanty, O N (1992) Microstructural and magnetic-properties of fe-mn-al soft magnetic-alloys. Materials Transactions JIM, 33 (11). pp. 1063-1067.

Tewari, C R and Pramanik, S and Rao, Venkatesh and Mohanty, O N (1992) Microstructural and magnetic-properties of Fe-Mn-Al soft magnetic-alloys. Materials Transactions Jim, 33 (11). pp. 1063-1067.

Tewari, J P and Singh, S K and Premchand, (1995) Preparation of electroless copper-graphite composite powder for application in avionics industries. NML Technical Journal, 37 (1). pp. 1-11.

Tewari, J P and Upadhyaya, G S (1974) Powder metallurgical aspects of alloy steels. NML Technical Journal, 16 (1-2). pp. 20-22.

Tewari, J P and Upadhyaya, G S (1977) Sintering behavior of Ni-Cu-Mo low-alloy steels. Transactions of the Indian Institute of metals, 30 (5). pp. 345-347.

Thakur, A K and Kumar, R R and Bansal, G K and Verma, Rahul K. and Tarafder, S and Sivaprasad, S and Mandal, G K (2021) Processing-Microstructure-Property Correlation for Producing Stretch-Flangeable Grade Dual-Phase Steel. Journal of Materials and Performance .

Thakur, P and Chakravarty, S and Maity, S and Bhattacharjee, S and Gupta, K K (2004) A Study on the Adsorption of Cr(VI) on a Synthetically Prepared Zn-Al-Cl Layered Double Hydroxide(LDH). Metals Materials and Processes, 16 (2-3). pp. 339-350.

Thakur, U P (2004) Recent Developments in Corrosion Mitigation. National Seminar on Corrosion Failures & Mitigation .

Thangaraj, B and Sankara Narayanan, T S N and Kulandaivelu, R and Lee, Min Ho (2015) A Facile Method to Modify the Characteristics and Corrosion Behavior of 304 Stainless Steel by Surface Nanostructuring toward Biomedical Applications. ACS Appl Mater Interfaces, 7(32) (IF-6.723). pp. 17731-17747.

Thanseer, P M and Metya, A K and Palit Sagar, S (2017) Development of a Non-collinear Nonlinear Ultrasonic-Based Technique for the Assessment of Crack Tip Deformation. Journals of Materials Engineering and Performance, 26(6) (IF-1.331). pp. 2632-2639.

Thilakan, H R and Lahiri, A K and Banerjee, T (1967) Studies on the resistance and alloy steels against oil-ash Corrosion -Part1. NML Technical Journal, 9 (2). pp. 20-25.

Thilakan, H R and Lahiri, A K and Banerjee, T (1969) Studies on the resistance of alloy steels against oil-ash corrosion-Part II. NML Technical Journal, 11 (1). pp. 12-16.

Thriveni, Thenepalli and Ryu, Miyoung and Kim, Hwan and Han, GI-Chun and Ahn, Ji-Whan (2010) Aragonite precipitated calcium carbonate : A new kind of functional filler. Journal of Metallurgy and Materials Science, 52 (4). pp. 279-303.

Thriveni, Thenepalli and Ahn, Young Jun and Han, Choon and Nam, Um and Ahn, Ji-Whan (2013) Scalenohedral calcite crystal growth by carbonation process for CO2 sequestration. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 49-57.

Tichit, Didier and Das, N N and Coq, Bernard and Durand, Robert (2002) Preparation of Zr-containing layered double hydroxides and characterization of the acido-basic properties of their mixed oxides. Chemistry of Materials, 14 (4). pp. 1530-1538.

Tiwari, S K and Adhikary, Jhuma and Singh, T B and Singh, Raghuvir (2009) Preparation and characterization of sol–gel derived yttria doped zirconia coatings on AISI 316L. Thin Solid Films, 517 (16). pp. 4502-4508.

Tiwari, S K and Choubey, Pankaj K and Mahapatra, S P (2013) Bound rubber properties of chlorobutyl elastomer nanocomposites: effect of carbon nanotube and storage time. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 187-193.

Tiwari, S K and Choubey, Pankaj K and Mahapatra, S P (2012) Chlorobutyl elastomer-multiwalled carbon nanotube nanocomposites as effective barrier materials. Journal of Metallurgy and Materials Science, 54(4) . pp. 279-289.

Tiwari, S K and Mishra, T and Gunjan, M K and Bhattacharyya, A S and Singh, T B and Singh, Raghuvir (2007) Development and characterization of sol–gel silica–alumina composite coatings on AISI 316L for implant applications. Surface and Coatings Technology, 201 (16-17). pp. 7582-7588.

Tiwari, S K and Rao, A U and Chawla, V and Dubey, Paritosh and Saxena, V and Chawla, A K and Avasthi, D K (2022) Synthesis and characterization of sputter-deposited Ni-rich Ni3Al hard coatings. Journal of Alloys and Compounds, 926 .

Tiwari, S K and Sahu, Ranjan K and Pramanick, A K and Singh, Raghuvir (2011) Development of conversion coating on mild steel prior to sol gel nanostructured Al2O3 coating for enhancement of corrosion resistance. Surface and Coatings Technology, 205 . pp. 4960-4967.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2012) Electrochemical behavior of zirconia based coatings on mild steel prepared by sol-gel method. Corrosion Science, 63 . pp. 334-341.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2013) Influence of SiO, Substitution on Corrosion Behavior of Sol-gel TiO,Coating on Mild Steel. IIM Metal News, 16(5) . pp. 1-4.

Tiwary, S K (1981) Dephosphorisation of hot metal-A review. NML Technical Journal, 23 (3-4). pp. 37-42.

Tiwary, S K and Gupte, P K (1970) Hardening of silicon spring steel. NML Technical Journal, 12 (1). pp. 1-4.

Tiwary, S N and Tripathi, P S M (2010) Effect of variation of moisture content of Hariajam coal on its electrical resistivity. Journal of Metallurgy and Materials Science, 52 (3). pp. 239-245.

To Duy, Ca and Lee, Z H and Park, Y H and Shin, J S (2003) Effect of Lathanium on thermodynamics of sulphides formation in molten steel. Journal of Metallurgy and Materials Science, 45 (2). pp. 85-90.

To Duy, P and Lee, Z H (2004) Influence of rare earth metals on non-metallic inclusion in 25cr-7Ni-3Mo-0.25N duplex stainless steel. Journal of Metallurgy and Materials Science, 46 (3). pp. 135-146.

Tome, Sylvain and Bewa, C N and Nana, Achile and Nemaleu, J G D and Etoh, Marie-Annie and Tchakoute, H K and Kumar, Sanjay and Etame, Jacques (2021) Structural and Physico-mechanical Investigations of Mine Tailing-Calcined Kaolinite Based Phosphate Geopolymer Binder. Silicon .

Tome, Sylvain and Etoh, Marie-Annie and Etame, Jacques and Kumar, Sanjay (2020) Improved Reactivity of Volcanic Ash using Municipal Solid Incinerator Fly Ash for Alkali-Activated Cement Synthesis. Waste and Biomass Valorization, 11 (IF-2.358). pp. 3035-3044.

Tome, Sylvain and Nana, A and Kaze, C R and Djobo, J N Y and Alomyri, T and Kamseu, E and Etoh, Marie-Annie and Etame, Jacques and Kumar, Sanjay (2021) Resistance of Alkali-Activated Blended Volcanic Ash-MSWI-FA Mortar in Sulphuric Add and Artificial Seawater. Silicon .

Toymoori, A and Webster, T (2020) The role of nanomedicine in the treatment of osteosarcoma and in the prevention of infections. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 1-12.

Tran, N and Mir, Aparna and Mallik, D and Sinha, Arvind and Nayar, S and Webster, Thomas J (2010) Bactericidal effect of iron oxide nanoparticles on Staphylococcus aureus. International Journal of Nanomedicine, 5 . pp. 277-283.

Trehan, Y N (1967) Ageing characteristics of some Al-Zn-Mg alloy. NML Technical Journal, 9 (3). pp. 4-7.

Trehan, Y N (1967) Epitaxial growth of thin oxide and sulphide films on copper. NML Technical Journal, 9 (1). pp. 9-15.

Trehan, Y N (1968) Thermal expansion characteristics of some Fe-Cr-Mn-N alloys. NML Technical Journal, 10 (2). pp. 31-34.

Trehan, Y N and Bhadra, S P and Gupte, P K (1960) Electrolytic polishing of stainless steels. NML Technical Journal, 2 (2). pp. 8-17.

Trehan, Y N and Sharma, T L (1972) The electrolytic polishing of aluminium and aluminium alloys in a universal perchloric acid-bath. NML Technical Journal, 14 (3). pp. 119-126.

Trentini, B and Allard, M (1959) Steelmaking by Injection of Oxygen and Lime Powder Irsid-O.L.P. Process. NML Technical Journal, 1 (1). pp. 115-120.

Tripaliya, S S and Gupta, M K and Sahu, Rina and Pappu, A and Sharma, C and Chaturvedi, A K and Srivastava, A K (2020) Tuning surface resistivity and thermal conductivity of water resistant fly ash waste based polymer composite via tailoring the interfacial polarization. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 71-80.

Tripathy, S and Chowdhury, S G (2021) On the through-process texture evolution assessment in grain oriented Fe-3 wt% Si steel produced by a novel directional inoculation technique. Scientific Reports, 11(1) .

Tripathy, S and Gupta, G and Ghosh Chowdhury, S (2018) High Entropy Alloys: Criteria for Stable Structure. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49A/1 (IF- 1.874). pp. 7-17.

Tripathy, S and Jena, P S M and Sahu, V K and Sarkar, S K and Ahlawat, S and Biswas, A and Mahato, B and Tarafder, Soumitra and Chowdhury, S G (2022) On the Competitive Substitutional Partitioning During Nano-pearlitic Transformation in Multicomponent Steels. Metallurgical and Materials Transactions A-Physical Metallurgical and Materials Science, 53(5) . pp. 1806-1820.

Tripathy, S and Sahu, V K and Jene, P S M and Tarafder, Soumitra and Chowdhury, S G (2022) On the importance of local equilibria in alloy design criteria for bulk nano-pearlitic steels and ensuing mechanical properties. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 841 .

Tripathy, T and Bhagat, R P and Singh, R P (2001) The flocculation performance of grafted sodium alginate and other polymeric flocculants in relation to iron ore slime suspension. European Polymer Journal, 37 (1). pp. 125-130.

Tripathy, T and Pandey, S R and Karmakar, N C and Bhagat, R P and Singh, R P (1999) Novel flocculating agent based on sodium alginate and acrylamide. European Polymer Journal . pp. 2057-2072.

Udaya Bhaskar, K and Govindarajan, B and Rao, K K and Barnwal, J P and Venugopal, R and Jakhu, M R and Rao, T C (2001) Graphite rejection in a lead concentrate using gravity concentration techniques. Journal of Metallurgy and materials Science, 43 (1). pp. 25-31.

Udaya Bhaskar, K and Ramakrishnan, N (2002) Computational methods for analyses in mineral processing. Journal of Metallurgy and materials Science, 44 (2). pp. 81-89.

Um, Nam Il and Thriveni, Thenepalli and Nam, Seong-Young and Ahn, Ji-Whan (2013) Effect of water content on accelerated carbonation of municipal solid waste incinerator bottom ash for CO2 capture. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 113-117.

Umadevi, G and Ponnusamy, V (2008) Effects of DC voltages using HCI, H2SO4 acids on polyaniline synthesised electrochemically. Journal of Metallurgy and Materials Science, 50 (1). pp. 45-52.

Umadevi, T and Kumar, Abhishek and Umashanker, A and Sah, Rameshwar and Marutiram, K (2019) Performance evaluation of a laboratory floatex density separator and its comparison with a spiral concentrator. Mineral Processing and Extractive Metallurgy (Trans. IMM), Online . pp. 1-8.

Upadhyay, A K and Gupta, K K and Sircar, J K and Deb, M K and Mundhara, G L (2007) Dominance of lithogenic effect for nickel, cobalt, chromium and mercury as found in freshly deposited sediments of the river Subernarekha, India. Environmental Geology, 51 (8). pp. 1447-1453.

Upadhyay, A K and Gupta, K K and Sircar, J K and Deb, M K and Mundhara, G L (2006) Heavy metals in freshly deposited sediments of the river Subernarekha, India: an example of lithogenic and anthropogenic effects. Environmental Geology, 50 (3). pp. 397-403.

Upadhyay, C and Mishra, D and Anand, S and Verma, H C and Das, R P (2003) Effect of preparation conditions on formation of nanophase Ni–Zn ferrites through hydrothermal technique. Journal of Magnetism and Magnetic Materials, 260 . pp. 188-194.

Upadhyay, C and Verma, H C and Rath, C and Sahu, K K and Anand, S and Das, R P and Mishra, N C (2001) Mössbauer studies of nanosize Mn1−xZnxFe2O4. Journal of Alloys and Compounds, 326(1-2) . pp. 94-97.

Upadhyay, Rajendra Kumar and Venkatesh, Akella Satya and Roy, Subrata (2010) Mineralogical Characteristics of Iron Ores in Joda and Khondbond Areas in Eastern India with Implications on Beneficiation. Resource Geology, 60 (2). pp. 203-211.

Upadhyay, T C and Joshi, Makarand (2012) Dielectric properties of quasi-one dimensional PbHPO4 crystal in presence of external electric field. Journal of Metallurgy and Materials Science, 54(3) . pp. 209-218.

Usha, Yenni and Das, Atanu and Bansal, G K and Krishna, K Gopala and Mandal, G K (2024) Heat Transfer and Fluid Flow During Laser Powder Bed Fusion of SS316L Stainless Steel. Transactions of The Indian Institute of Metals .

Vaish, A K and Akerkar, D D (1988) An electrothermal model for the optimum design and smelting operation in reducing type ferro-alloy furnaces. Transactions of the Indian Institute of metals, 41 (3). pp. 247-254.

Vaish, A K and Akerkar, D D (1988) Quick lime process for the production of calcium silicide through electrothermal smelting. Transactions of the Indian Institute of metals, 41 (4). pp. 385-387.

Vaish, A K and Bhatnagar, S K (2015) Steel making in LD converter for the production of billets - A typical case study. Journal of Metallurgy and Materials Science, 57(4) . pp. 225-235.

Vaish, A K and Biswas, P K and Goswami, N G and Sivaramakrishnan, C S and Ramachandrarao, P (2000) Historical perspective of iron in ancient India. Journal of Metallurgy and materials Science, 42 (1). pp. 65-74.

Vaish, A K and Biswas, P K and Humane, M M and Rao, D S and Goswami, N G (2001) Tribal system of iron making in India -R&D for optimum operation. Journal of Metallurgy and materials Science, 43 (3). pp. 213-220.

Vaish, A K and Goswami, M C and Biswas, P K and Humane, M M and Ramachandrarao, P (2004) Thermodynamic and Kinetic Aspects of Ancient Iron Making Technology in India. Journal of Rural Technology, 1 (4). pp. 156-162.

Vaish, A K and Goswami, N G (2002) Development in the quality and usage of steel for automobile vehicle. Journal of Metallurgy and materials Science., 44 (2). pp. 59-80.

Vaish, A K and Goswami, N G (2002) Environmental degradation in an integrated steel plant: Specific measures for its sustainable growth. Journal of Metallurgy and materials Science., 44 (4). pp. 203-216.

Vaish, A K and Goswami, N G and Biswas, P K and Minz, R K and Humane, M M and Sivaramakrishnan, C S and Ramachandrarao, P (1999) Ancient iron making in India-historical perspective, technological aspects and future prospects. NML Technical Journal, 40 (4). pp. 183-194.

Vaish, A K and Gupta, R C and Mehrotra, S P (2007) Smelting reduction of iron ore - An optimum approach. Journal of Metallurgy and Materials Science, 49 (3). pp. 129-143.

Vaish, A K and Gupta, R C and Mehrotra, S P (2006) Thermodynamic and kinetic aspects of the smelting reduction of multimetallic Indian magnetite ore. Journal of Metallurgy and Materials Science, 48 (1). pp. 1-12.

Vaish, A K and Humane, M M and Chakrabarty, A K and Ramachandrarao, P (1998) Direct current transferred arc plasma reactor-Its suitability for smelting reduction and refining processes. NML Technical Journal, 40 (3). pp. 95-108.

Vaish, A K and Humane, M M and De, P K and Mahato, B and Ravi Kumar, B (2003) Effect of texture formation on formability of cold rolled and annealed extra deep drawing and inerstitial free steel sheets. Journal of Metallurgy and materials Science, 45 (1). pp. 1-10.

Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Das, Goutam and Das, Swapan K and Kumar, R and Das, Samar (2001) Effect of thermo-mechanical processing on the microstructure and mechanical properties of micro alloyed steels. Journal of Metallurgy and materials Science, 43 (4). pp. 221-238.

Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Minj, R K and Das, Goutam and Das, S K and Kumar, R and Das, Samar and Lakra, B A and Das, Swapan K and Ravi Kumar, B and Das, Samar and Lakra, B A (2001) Development of microalloyed steels and its design aspects Part I : Medium and low carbon micro-alloyed forging steels. Journal of Metallurgy and materials Science., 43 (3). pp. 147-173.

Vaish, A K and Humane, M M and Minz, R K and Chakravarti, A K and Ramachandrarao, P (1999) Rare earth metals addition to low carbon steel-thermodynamic aspects, process considerations and effect on mechanical properties. NML Technical Journal, 40 (3). pp. 85-125.

Vaish, A K and Humane, M M and Singh, S D and Goswami, N G (2002) Environmental management for sustainable growth in foundry industries. Journal of Metallurgy and Materials Science, 44 (3). pp. 135-149.

Vaish, A K and Iyer, G V R and De, P K and Lakra, B A and Chakrabarti, A K and Ramachandrarao, P (2000) Electroslag remelting - Its status, mechanism and refining aspects in the production of quality steels. Journal of Metallurgy and materials Science, 42 (1). pp. 11-29.

Vaish, A K and Mahanty, M S and Saha, A K and Mathur, S B (1986) Calcium-silicide is a powerful deoxidiser. NML Technical Journal, 28 (1-4). pp. 18-25.

Vaish, A K and Mahanty, M S and Saha, A K and Mathur, S B and Bodas, M G and Kumar, Vinay and Jana, R K and Khan, Z H and Akerkar, D D (1988) Pilot scale production of ferro-silicon through electro-thermal smelting. NML Technical Journal, 30 (1-4). pp. 6-12.

Vaish, A K and Mahanty, M S and Saha, A K and Mathur, S B and Bodas, M G and Kumar, Vinay and Jana, R K and Khan, Z H and Bagchi, D and Nayak, A K and Akerkar, D D (1986) Production of multi-grade calcium silicide by quick lime method. NML Technical Journal, 28 (1-4). pp. 18-25.

Vaish, A K and Mehrotra, S P and Gupta, R C (2006) Thermodynamics and reduction kinetics of iron ore in direct reduction processes. Journal of Metallurgy and Materials Science, 48 (2). pp. 59-73.

Vaish, A K and Minj, R K (2002) Significance of burden distribution in the performance of a blast furnace. Journal of Metallurgy and materials Science., 44 (4). pp. 167-183.

Vaish, A K and Minj, R K and Gupta, R N and Konar, J (2008) Kinetics and mechanism of multi-metallic magnetite ore reduction from liquid slags by solid carbon and carbon-saturated iron. Journal of Metallurgy and Materials Science, 50 (2). pp. 65-83.

Vaish, A K and Minj, R K and Marutiprasad, Y (2003) Modern features for the optimum performance of blast furnace. Journal of Metallurgy and materials Science, 45 (3). pp. 103-125.

Vaish, A K and Nayak, B and Mehrotra, S P and Gupta, R C (2007) The Ni-Cr-Co bearing magnetite ore of Nagaland, India - its mineralogical characteristics. Journal of Metallurgy and Materials Science, 49 (4). pp. 215-220.

Vaish, A K and Singh, S D (2011) Development of Eco-friendly process for the recovery of Lead from lead battery scrap in small scale sector. The Banaras Metallurgist, 16 ( ). pp. 149-157.

Vaish, A K and Singh, S D and Biswas, D K (2001) Cokeless cupola melting - An efficient and cost effective process for foundries. Journal of Metallurgy and materials Science, 44 (4). pp. 239-245.

Vaish, A K and Singh, S D and Biswas, D K (2002) Development of a thermo-chemical model for efficient, eco-friendly and cost effective melting in cokeless cupola. Journal of Metallurgy and materials Science., 44 (1). pp. 15-29.

Vaish, A K and Singh, S D and Humane, M M and Goswami, N G (2006) Woodchar - A sustainable reductant and renewable source of thermal energy for tribal iron making. Journal of Metallurgy and Materials Science, 48 (1). pp. 51-58.

Vaish, A K and Singh, S D and Minj, R K and Bandyopadhyay, D (2004) An insight into energy saving measures in an integrated steel plant. Journal of Metallurgy and materials Science, 46 (4). pp. 213-231.

Vaish, A K and Singh, S D and Minj, R K and Chishi, H K and Gupta, R C (2010) Prospects of Nickel—Chromium—Cobalt Bearing Magnetite Ore Deposit of Nagaland. IIM Metal News, 13 (4). pp. 17-22.

Vaish, A K and Singh, S D and Minj, R K and Gupta, R C (2013) Exploration and Exploitation of Multi-Metallic Magnetite Ore of Nagaland for Value Added Product. Transactions of the Indian Institute o Metals, 66(5-6) (IF-0.215). pp. 491-499.

Vaish, A K and Singh, S D and Minj, R K and Humane, M M (2005) Need to exploit Indian ilmenite for commercial production of titanium sponge by carbo-chlorination process. Journal of Metallurgy and Materials Science, 47 (4). pp. 223-227.

Vaish, A K and Singh, S D and Minj, R K and Konar, J and Premchand, and Gupta, R C (2009) Prospects of smelting reduction of nickel - chromium - cobalt bearing magnetite deposit of Nagaland State for value added products. Journal of Metallurgy and Materials Science, 51 (4). pp. 247-258.

Vaish, A K and Singh, S D and Singh, K K and Paul, K K and Mallik, A K and Ramachandrarao, P (1999) Design aspects of DC arc plasma reactors for materials processing. Bulletin of Electrochemistry, 15 (7-8). pp. 323-328.

Vaish, Ashok Kumar (1987) Conspectus of gas-solid fluidization. NML Technical Journal, 29 (1-4). pp. 9-13.

Vaish, Ashok Kumar (2019) Spectrum of engineering materials for sustainable development. Journal of Metallurgy and Material Science, 61(1) . pp. 39-50.

Vanithakumari, S C and George, R P and Mudali, U Kamachi (2020) High performance specialized coatings for applications in corrosive environments. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 13-27.

Vapnik, Yevgeny and Bushmin, Sergey and Chattopadhyay, A and Dobrovolsky, D D (2007) Fluid inclusion and mineralogical study of vein-type apatite ores in shear zones from the Singhbhum metallogenetic province, West Bengal, India. Ore Geology Reviews, 32 (1-2). pp. 412-430.

Varma, Nitin Pratap and Garai, Subhadra and Sinha, Arvind (2012) Synthesis of injectable and cohesive nano hydroxyapatite Scaffolds. Journal of Materials Science: Materials in Medicine, 23 (4). pp. 913-919.

Varshney, A and Sangal, S and Gouthama, and Pramanick, A K and Mondal, K (2017) Microstructural evidence of nano-carbides in medium carbon high silicon multiphase steels. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 708 (IF-3.094). pp. 237-247.

Varshney, A and Sangal, S and Pramanick, A K and Mondal, K (2020) On the extent of transformation of austenite to bainitic ferrite and carbide during austempering of high Si steel for prolonged duration and its effect on mechanical properties. Materials Science and Engineering A, 793 (IF-4.652). p. 139764.

Vasumathi, N and Chennakesavulu, K and Cassandra Austen, I and Kumari, Ajita and Kalidoss, J and Sukumaran Suseelamma, S and Vijaya Kumar, T V and Gopalkrishna, S J (2023) Development of a novel biocollector for flotation of low grade graphite ore. Energy sources, Part A: Recovery, utilization, and environmental effects (2.9).

Vasumathi, N and K, Chennakesavulu and I, Cassandra Austen and Madhira, Sai K and Vijaya Kumar, T V and Kumari, Ajita (2023) Study on Flotation of Sillimanite Using Plant-Based Collector. Sustainable Chemical, Mineral and Material Processing: Lecture Notes in Mechanical Engineering .

Vasumathi, N and Sai Kumar, M and Abhishek, D S V and Vijaya Kumar, T V and Gopalkrishna, S.J. (2023) A Comparative Study on Flotation of Coal Using Eco-Friendly Single Reagent and Conventional Dual-Reagent System. Sustainable Chemical, Mineral and Material Processing:Lecture Notes in Mechanical Engineering .

Vasumathi, N and Sarjekar, A and Chandrayan, H and Chennakesavulu, K and Reddy, G R and Kumar, T V Vijaya and El-Gendy, N S and Gopalakrishna, S J (2023) A Mini Review on Flotation Techniques and Reagents Used in Graphite Beneficiation. International Journal of Chemical Engineering, 2023 .

Vasumathi, N and Vijaya Kumar, T V and Nayak, B and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2014) Beneficiation of low grade graphite ore of eastern India by two-stage grinding and flotation. Journal of Mining and Metallurgy Section A Mining, 50 A (1) . pp. 9-17.

Vasumathi, N and Vijaya Kumar, T V and Ratchambhigai, S and Subba Rao, S and Bhaskar Raju, G (2015) Flotation studies on low grade graphite ore from Eastern India. International Journal of Mining Science and Technology, 25(3) . pp. 415-420.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2016) Beneficiation of an Indian non-coking coal by column flotation. International Journal of Coal Science & Technology, 3(2) (IF- 0.640). pp. 206-214.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G and Shivakumar, S and Uma, Raman (2013) Eco Friendly and Cost-Effective Reagent for Coal Flotation. International Journal of Engineering Research, 2(7) (IF-0.421). pp. 418-423.

Venkata Siva, S B and Ganguly, R I and Srinivasarao, G and Sahoo, K L (2013) Machinability of Aluminum Metal Matrix Composite Reinforced with In-Situ Ceramic Composite Developed from Mines Waste Colliery Shale. Materials and Manufacturing Processes, 28(10) . pp. 1082-1089.

Venkata Siva, S B and Sahoo, K L and Ganguly, R I and Dash, R R (2012) Effect of Hot Working on Structure and Tribological Properties of Aluminium Reinforced with Aluminium Oxide Particulates. Journal of Materials Engineering and Performance, 21 (7). pp. 1226-1231.

Venkata Siva, S B and Sahoo, K L and Ganguly, R I and Dash, R R and Singh, S K and Satpathy, B K and Srinivasarao, G (2013) Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material. Metallurgical and Materials Transactions B , 44 (IF-1.212). pp. 800-808.

Venkatadri, A S and Ghosh, M and Ramaswamy, V and Tiwary, S K (1991) Pretreatment of hot metal with soda ash and with soda ash sodium-sulfate mixture. Ironmaking & Steelmaking, 18 (6). pp. 411-416.

Venkataraman, R and Das, Goutam and Singh, S R and Ghosh, R N and Venkataraman, B and Krishnamurty, R (2007) Study on influence of porosity, pore size, spatial and topological distribution of pores on microhardness of as plasma sprayed ceramic coatings. Materials Science and Engineering A, 445-446 . pp. 269-274.

Venkataraman, R and Das, Goutam and Venkataraman, B and Narashima, Rao and Krishnamurty, R (2006) Image processing and statistical analysis of microstructures of as plasma sprayed Alumina–13 wt.% Titania coatings. Surface and Coatings Technology, 201 (6). pp. 3691-3700.

Venkataraman, R and Krishnamurty, R (2006) Evaluation of fracture toughness of as plasma sprayed alumina-13 wt.% titania coatings by micro-indentation techniques. Journal of the European Ceramic Society, 26 (15). pp. 3075-3081.

Venkataraman, R and Parmanick, B and Ravi Kumar, B and Pathak, L C and Das, D K and Venkataraman, B (2006) The influence of substrate on partially rapidly solidified Alumina-3 wt % titania nanocrystalline coatings deposited by plasma spray technique. Surface Engineering for Manufacturing Applications , 890 . pp. 69-75.

Venkataraman, R and Ravi Kumar, B and Krishnamurty, R and Das, D K (2006) A study on phase stability observed in as sprayed Alumina-13 wt.% Titania coatings grown by detonation gun and plasma spraying on low alloy steel substrates. Surface and Coatings Technology, 201 (6). pp. 3087-3095.

Venkataraman, R and Singh, S Pabla and Venkataraman, B and Das, D K and Pathak, L C and Ghosh Chowdhury, S and Ghosh, R N and Ravichandra, D and Rao, G V Narasima and Nair, Keasavan and Kathirkar, Rajesh (2008) A scanning electron microscopic study to observe the changes in the growth morphology of the α phased Alumina–13 wt.% titania coatings during plasma spraying. Surface and Coatings Technology, 202 (21). pp. 5074-5083.

Venkateswararao, V (1992) Microstructural features of rapidly solidified 7075 alloy containing 1.0 wt-percent-Mn. Scripta Metallurgica Et Materialia , 26 (5). pp. 819-823.

Venkateswarlu, K (1996) Influence of the size and morphology of silicon particles on the physical, mechanical and tribological properties of some aluminium - silicon alloys. Material Science letters, 15 . pp. 1773-1776.

Venkateswarlu, K and Chakraborty, M and Murty, B S (2004) Influence of thermo-mechanical processing of Al-5Ti-1B master alloy on its grain refining efficiency. Materials Science and Engineering A, 364 (1-2). pp. 75-83.

Venkateswarlu, K and Das, Goutam and Pramanick, A K and Xu, Cheng and Langdon, T G (2006) Using ball-indentation to evaluate the properties of an ultrafine-grained Al–2% Si alloy processed by ECAP. Materials Science and Engineering A, 427 (1-2). pp. 188-194.

Venkateswarlu, K and Das, Swapan K and Chakraborty, M and Murty, B S (2003) Influence of thermo-mechanical treatment of Al-5Ti master alloy on its grain refining performance on aluminium. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 351 (1-2). pp. 237-243.

Venkateswarlu, K and De, P K and Das, S K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2002) Thermo-mechanical treatment of AI-5Ti-lB and AI-5Ti master alloy on its grain refining performance on aluminium. Journal of Metallurgy and materials Science., 44 (3). pp. 109-125.

Venkateswarlu, K and De, P K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2004) Effect of rolling on AI-5Ti binary master alloy(sponge route) and its grain refining performance in aluminium. Journal of Metallurgy and materials Science, 46 (2). pp. 107-113.

Venkateswarlu, K and Ghosh, M and Ray, Ajoy K and Xu, Cheng and Langdon, T G (2008) On the feasibility of using a continuous processing technique incorporating a limited strain imposed by ECAP. Materials Science and Engineering: A, 485 (1-2). pp. 476-480.

Venkateswarlu, K and Ghosh Chowdhury, S and Pathak, L C and Ray, Ajoy K (2007) Microstructural examination of service exposed coal mill liner material. Materials Characterization, 58 (10). pp. 1029-1032.

Venkateswarlu, K and Mohapatra, S and Rao, R G and Ray, Ajoy K and Pathak, L C and Mondal, D P (2006) High abrasive wear response of diamond reinforced composite coating: a factorial design approach. Tribology Letters, 24 (1). pp. 7-14.

Venkateswarlu, K and Murty, B S and Chakraborty, M (2001) Effect of hot rolling and heat treatment of Al–5Ti–1B master alloy on the grain refining efficiency of aluminium. Materials Science and Engineering A, 301 (2). pp. 180-186.

Venkateswarlu, K and Pathak, L C and Ray, Ajoy K and Das, Goutam and Verma, P K and Kumar, M and Ghosh, R N (2004) Microstructure, tensile strength and wear behaviour of Al–Sc alloy. Materials Science and Engineering A, 383 (2). pp. 374-380.

Venkateswarlu, K and Rajnikanth, V and Naveen, T and Sinha, D P and Atiquzzaman, and Ray, Ajoy K (2009) Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques. Wear, 266 (9-10). pp. 995-1002.

Venkateswarlu, K and Rajnikanth, V and Ray, Ajoy K and Xu, Cheng and Langdon, T G (2010) The characteristics of aluminum–scandium alloys processed by ECAP. Materials Science and Engineering: A, 527 (6). pp. 1448-1452.

Venkateswarlu, K and Rajnikanth, V and Ray, Ajoy K and Xu, Cheng and Langdon, T G (2010) Effect of A Scandium Addition On An Al-2% Si Alloy Processed by ECAP. Reviews on Advanced Materials Science, 25 (2). pp. 99-106.

Venkateswarlu, K and Rajnikanth, V and Sen, Mani Kuntal and Alhajeri, S N and Langdon, T G (2010) Application of High-Pressure Torsion to Al-Si Alloys with and without Scandium Additions. Materials Science Forum, 667-669 . pp. 743-748.

Venkateswarlu, K and Rajnikanth, V and Sirkar, M K and Atiquzzaman, and Sinha, D P and Das, S K (2008) High stress abrasive wear behavior of coal mill liner materials - A model based factorial design. Journal of Metallurgy and Materials Science, 50 (3). pp. 151-166.

Venkateswarlu, K and Ray, Ajoy K and Gunjan, M K and Mondal, D P and Pathak, L C (2006) Tribological wear behavior of diamond reinforced composite coating. Materials Science and Engineering A, 418 (1-2). pp. 357-363.

Venkateswarlu, K and Saurabh, Suman and Rajnikanth, V and Sahu, Ranjan K and Ray, Ajoy K (2010) Synthesis of TiN Reinforced Aluminium Metal Matrix Composites Through Microwave Sintering. Journal of Materials Engineering and Performance, 19 (2). pp. 231-236.

Venkatrama, M and Mohanty, O N and Ghosh, R N (2001) Modelling of transformation kinetics in HSLA 100 steel during continuous cooling. Scandinavian Journal Of Metallurgy, 30 (1). pp. 8-13.

Venugopalan, T and Misra, S and Srikanth, S and Tarafder, S (2013) Preface. Transactions of Indian Institute of Metals, 66(5-6) Special Issue: SI (IF-0.215). p. 445.

Verma, A and Roy, A and Anantharaman, T R (1991) Processing and properties of silver-tin oxide-indium oxide electrical contact materials. International journal of powder metallurgy, 27 (1). pp. 51-56.

Verma, A K and Johari, K K and Dubey, Paritosh and Candolfi, C and Lenoir, B and Walia, S and Dhakate, S R and Gahtori, B (2023) Coupling of electronic transport and defect engineering substantially enhances the thermoelectric performance of p-type TiCoSb HH alloy. Journal of Alloys and Compounds, 947 .

Verma, A K and Sharma, S and Ghosh, K S (1996) Ceramics for Automobile Industries. NML Technical Journal, 38 (2). pp. 63-72.

Verma, B and Mishra, Suman K (2019) Spectral and structural investigation of layered growth of copper and graphene deposited by sputtering and annealing. Applied Physics A: Materials Science & Processing, 125(8) .

Verma, D and Banerjee, D and Mishra, Suman K (2019) Effect of Silicon Content on the Microstructure and Mechanical Properties of Ti-Si-B-C Nanocomposite Hard Coatings. Metallurgical and Materials Transactions A , 50(2) . pp. 894-904.

Verma, M N P and Dutt, Ashimesh and Rao, G N and Kumar, Rajendra (1975) Manufacture of soil pipe castings to export specification. NML Technical Journal, 17 (1-2). pp. 15-20.

Verma, N P and Sinha, Arvind (2013) Effect of solid to liquid ratio on the physical properties of injectable nanohydroxyapatite. Journal of Materials Science-Materials in Medicine, 24(1) (IF-2.141). pp. 53-59.

Verma, Piyush Chandra and Mishra, Suman K (2020) Synthesis of iron boride powder by carbothermic reduction method. Materials Today: Proceedings, Online (SNIP-0.576).

Vidyadhar, A and Das, Avimanyu (2013) Enrichment implication of froth flotation kinetics in the separation and recovery of metal values from printed circuit boards. Separation and Purification Technology, 118 (IF-3.065). pp. 305-312.

Vidyadhar, A and Das, Avimanyu (2013) Stratification and segregation features of pulverized electronic waste in flowing film concentration. Journal of Environmental Management, 118 (IF-3.188). pp. 49-54.

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2014) Adsorption Mechanism of Mixed Cationic/Anionic Collectors in Quartz-Hematite Flotation System. Mineral Processing and Extractive Metallurgy Review: An International Journal, 35(2) (IF-0.690). pp. 117-125.

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2012) Adsorption mechanism of mixed collector systems on hematite flotation. Minerals Engineering, 26 . pp. 102-104.

Vidyadhar, A and Rao, K Hanumantha (2007) Adsorption mechanism of mixed cationic/anionic collectors in feldspar-quartz flotation system. Journal of Colloid and Interface Science, 306 (2). pp. 195-204.

Vijaya Kumar, T V and Gopalakrishna, S J (2013) Laboratory Column flotation studies for reduction of alumina and silica in iron ore slimes of an operating plant. Proceedings of the XIII International Seminar on Mineral Processing Technology (MPT – 2013) , 2 . pp. 406-415.

Vijaya Kumar, T V and Gopalakrishna, S J (2014) Optimization of flotation process for reduction of alumina and silica from screw classifier overflow of an iron ore washing plant. International Journal of Engineering Research, 3/1 (IF-0.421). pp. 1-5.

Vijaya Kumar, T V and Gopalakrishna, S J (2013) Selection of cationic collector for reduction of alumina and silica in iron ore slimes of an operating plant by flotation. International Journal of Engineering Sciences & Research Technology, 2/11 (IF-1.852 (International Society for Research Activity - ISRA)). pp. 3295-3302.

Vijaya Kumar, T V and Prabhakar, S and Bhaskar Raju, G (2002) Adsorption of oleic acid at sillimanite/water interface. Journal of Colloid and Interface Science, 247 (2). pp. 275-281.

Vijaya Kumar, T V and Prabhakar, S and Bhaskar Raju, G and Rao, D S and Subba Rao, S and More, P (2005) Semicommercial scale studies using flotation column and dual extraction column on iron ores of Goa, India. Journal of Minerals and Materials characterization and Engineering, 4 (2). pp. 113-124.

Vijaya Kumar, T V and Rao, D S and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2010) Cleaner production of garnet sand for environmental abatement. The Pacific Journal of Science and Technology , 11 (2). pp. 585-591.

Vijaya Kumar, T V and Rao, D S and Gopalakrishna, S J (2011) Mineralogical and separation characteristics of iron ore fines from Bellary – Hospet, India with special emphasis on beneficiation by flotation. Journal of Mining and Metallurgy, 47A (1). pp. 39-49.

Vijaya Kumar, T V and Rao, D S and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2010) Reverse flotation studies on an Indian low-grade iron ore slimes. International Journal of Engineering Science and Technology, 2 (4). pp. 637-648.

Vijaya Kumar, T V and Vasumathi, N and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2013) Recovery of ultrafine iron values from tailing pond of iron ore washing plants. The Indian Mineralogist, 1-2 . pp. 83-92.

Vijaya Kumar , T V and Rao, D S and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2006) Processing of iron ore fines by column flotation – Part I & part II. Minerals & Metals Review, June . pp. 48-51.

Vijayalakshmi, P and Bhaskar Raju, G and Gnanamani, A (2011) Advanced Oxidation and Electrooxidation As Tertiary Treatment Techniques to Improve the Purity of Tannery Wastewater. Industrial & Engineering Chemistry Research, 50 (17). pp. 10194-10200.

Vijayasarathi, P and Prabhu, S P and Rajaram, Gukan (2015) Abrasive wear behavior of Ti-Al-N hard-faced coatings evaluated with ball-cratering test method. Journal of Metallurgy and Materials Science, Vol. 57, No. 1, January-March 2015, pp. 9-18, 57(1) . pp. 9-18.

Vijayasarthi, P and Kavitha, C (2015) An investigation of design and thermal analysis of the different material on disc brake with frictional heat generation. Journal of Metallurgy and Materials Science, 57(4) . pp. 237-242.

Vinh, H H and Lee, Jae-chun and Jeong, Jinki and Huyunh, Trung Hai and Jha, Manis K (2010) Thiosulfate leaching of gold from waste mobile phones. Journal of Hazardous Materials, 178 (1-3). pp. 1115-1119.

Vishnoi, M and Kumar, A N V and Murugan, S S (2018) Electro chemical discharge machining and optimization of non-conducting materials. Journal of Metallurgy and Materials Science, 60(1) . pp. 13-20.

Vishwakarma, Jaydeep and Rajpurohit, R S and Rao, G S and Chattopadhyay, K and Srinivas , N C S (2023) Low cycle fatigue behavior of additive manufactured maraging steel: Influence of build orientation and heat treatment. Materials Letters, 350 .

Viswanath, S G and Jachak, Manish M (2013) Preparation of electrolytic cobalt powder by electrodeposition from cobalt sulphate solution in presence of glycerol and sulfuric acid medium and the study of morphology of the powder. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 279-291.

Viswanathan, K V and Majumdar, K K (1972) Adsorption of cresols on molybdenite. NML Technical Journal, 14 (2). pp. 63-66.

Viswanathan, P V and Mishra, R N and Bhatnagar, P P (1967) Studies on recovery of vanadium from calcium complex vanadate salt. NML Technical Journal, 9 (4). pp. 4-8.

Vohra, D K and Sharma, A (1997) Solvent extraction studies of Cu(II) with benzoyl acetone. NML Technical Journal, 39 (4). pp. 209-220.

Voice, E W (1960) The Uses and Limitations of Pilot Plants in Studying Iron Making Problems. NML Technical Journal, 2 (1). pp. 24-26.

Walunj, M G and Mandal, G K and Ranjan, R K and Pais, R and Mishra, Suman K and Venugopalan, T and Pathak, L C (2021) Role of dew points and Fe pre-coats on the galvanizing and galvannealing of dual phase steel. Surface and Coatings Technology, 422 .

Wanderka, N and Radiguet, B and Sahoo, K L and Banhart, J (2007) Crystallization Behavior of Al87Ni5La7Zr1 Metallic Glass. Materials Science Forum, 539-543 . pp. 1917-1920.

Whiting, A N and Raper, A G (1964) The new stora process for ironmaking. NML Technical Journal, 6 (1). pp. 35-41.

Wilde, B E and Chattoraj, I (1992) The effect of shot peening on hydrogen absorption by and hydrogen permeation through AISI 4130 steels. Scripta Metallurgica et Materialia, 26 (4). pp. 627-632.

Wilde, B E and Chattoraj, I (1992) The effect of shot peening on hydrogen absorption by and hydrogen permeation through aisi-4130 steels. Scripta Metallurgica Et Materialia , 26 (4). pp. 627-632.

Wollgarten, M and Sahoo, K L and Haug, J and Banhart, J (2007) Influence of La on the crystallisation behaviour of amorphous Al94−xNi6Lax (x=4 –7) alloys. Materials Science and Engineering A, 449-451 . pp. 1049-1051.

Woodrow, P A (1976) The transfer of technology from R&D laboratory to industry. NML Technical Journal, 18 (3). pp. 42-46.

Y, Rajshekar and Pal, J and T, Venugopalan (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking and Steelmaking, 45(4) . pp. 325-334.

Yadav, Anshul and Mandal, J R and Panda, Asit Baran and Shahi, Vinod K (2022) Structural tailoring of ceria nanoparticles for fabricating fouling resistant nanocomposite membranes with high flux distillation. Colloids and Surfaces A Physicochemical and Engineering Aspects, 633 .

Yadav, Anshul and Sharma, Prerana and Panda, Asit Baran and Shahi, Vinod K (2021) Photocatalytic TiO2 incorporated PVDF-co-HFP UV-cleaning mixed matrix membranes for effective removal of dyes from synthetic wastewater system via membrane distillation. Journal of Environmental Chemical Engineering, 9(5) (IF-5.909). p. 105904.

Yadav, Anshul and Singh, K and Panda, Asit Baran and Labhasetwar, P K and Shahi, Vinod K (2021) Membrane distillation crystallization for simultaneous recovery of water and salt from tannery industry wastewater using TiO2 modified poly (vinylidene fluoride-co-hexafluoropropylene) nanocomposite membranes. Journal of Water Process Engineering, 44 .

Yadav, B S and Sahu, Ranjan K and Pramanick, A K and Mishra, T and Alam, A and Bharti, M and Mukherjee, S and Kumar, S and Nayar, S (2019) Collagen functionalized graphene sheets decorated with in situ synthesized nano hydroxyapatite electrospun into fibers. Materials Today Communications, 18 . pp. 167-175.

Yadav, P N S (1995) The Polarisation behaviour of 3003 aluminium in some organic solvents. NML Technical Journal, 37 (3). pp. 89-94.

Yadav, P N S (1998) A study of passive behaviour of aluminium electrode in ethylenediamine. NML Technical Journal, 40 (1). pp. 11-15.

Yadav, P N S and Garg, S M (2000) Passivation behaviour of 1060 Al in aqueous ethylenediamine. Journal of Metallurgy and materials Science, 42 (1). pp. 43-46.

Yadav, P N S and Wadhwani, R (1992) Heterocyclic Compounds as Inhibitors for Aluminium Alloys in Hydrochloric Acid. NML Technical Journal, 34 (1-2). pp. 8-17.

Yadav, P N S and Wadhwani, R (1993) Role of anion in the corrosion of 1060 aluminium in hydrochloric acid. NML Technical Journal, 35 (1-2). pp. 1-5.

Yadav, P N S and Yadav, S S (1997) Role of water in the polarisation behaviour of some aluminium alloys in methylamine. NML Technical Journal, 39 (1). pp. 23-29.

Yedavalli, B V S (1973) Economic viability of bacterial leaching-A management research viewpoint. NML Technical Journal, 15 (4). pp. 28-31.

Yedavalli, B V S and Saha, A K (1994) Recovery of copper and zinc from scrap leaded brass. NML Technical Journal, 36 (1). pp. 1-9.

Yeon, J S and Gupta, N and Bhattacharya, P and Park , H S (2022) A New Era of Integrative Ice Frozen Assembly into Multiscale Architecturing of Energy Materials. Advanced Functional Materials, 32(19) .

Yoo, Kyoungkeun and Lee, Kwang Seok and Jha, Manis K and Lee, Jae-chun and Cho, Kuk (2016) Preparation of Nano-Sized Tin Oxide Powder from Waste Pb-Free Solder by Direct Nitric Acid Leaching. Journal of Nano-science and Nanotechnology, 16 (IF-1.483). pp. 11238-11241.

Yoo, Kyoungkeun and Lee, Jae-chun and Lee, Kwang Seok and Kim, Byung-Su and Kim, Min-seuk and Kim, Soo-kyoung and Pandey, B D (2012) Recovery of Sn, Ag and Cu from Waste Pb-Free Solder using Nitric Acid Leaching. Materials Transactions, 53 (12). pp. 2175-2180.

Yoon, Ho-Sung and Kim, Chul-Joo and Chung, Kyung Woo and Jeon, Sanghee and Park, Ilhwan and Yoo, Kyoungkeun and Jha, Manis K (2015) The Effect of Grinding and Roasting Conditions on the Selective Leaching of Nd and Dy from NdFeB Magnet Scraps. Metals, 5(3) (IF-0.883). pp. 1306-1314.

Young, M J R and Meadows, B J (1974) Application of stress analysis theory to the prediction of tube-drawing schedules. NML Technical Journal, 16 (3-4). pp. 41-45.

Zala, D M and Rajput, U P and Darji, S B and Rao, V J and Vaish, A K (2019) Graphene-recent advancements in its extraction, its comparative study with other materials and emerging applications. Journal of Metallurgy and Materials Science, 61(2) . pp. 95-108.

Zandrahimi, Morteza and Ebrahimifar, Hadi (2010) A study on the formation of intermetallic compound coatings on Inconel through pack cementation method. Journal of Metallurgy and Materials Science, 52 (4). pp. 331-339.

Zhang, Yanjun and Zhao, Hongbo and Zhang, Yisheng and Qian, Lu and Zhang, Luyuan and Meng, Xiaoyu and Lv, Xin and Abhilash, and Janjua, Hussnain Ahned and Qiu, Guanzhou (2019) Interactions between marmatite and bornite during the oxidative dissolution process in abiotic and biotic systems. RSC Advances, 9 (IF-3.51). pp. 26609-26618.

This list was generated on Thu Mar 28 14:06:41 2024 IST.