Browse by Document Type

A

Abhilash, (2009) Biosorption of Cr(III) using native fungal species isolated from tannery effluents. Training Report (TR). NML, Jamshedpur.

Abhilash, (2009) Extraction of chitosan from bioresources and its application in biosorption. Training Report (TR). NML, Jamshedpur.

Abhilash, (2011) Isolation and biochemical characterisation of marine bacterial species from indian ocean nodules. Training Report (TR). NML, Jamshedpur.

Abhilash, (2011) Isolation and purification of bacteria from bauxite and iron ore mine samples. Training Report (TR). NML, Jamshedpur.

Abhilash, (2008) Isolation of Microbial Species and Their Applications in Biosorption and Bioleaching. Training Report (TR). NML, Jamshedpur.

Abhilash, (2008) Isolation of native microbial species from soil and mine water of Uranium mines and their screening. Training Report (TR). NML, Jamshedpur.

Abhilash, (2009) Microbial Isolation Studies and its Implication in Biosorption of Chromium. Training Report (TR). NML, NML, Jamshedpur.

Abhilash, (2011) Optimisation of parameters for biosorption of trivalent chromium from model tannery effluent using penicillium species. Training Report (TR). NML, Jamshedpur. (Submitted)

Abhilash, (2010) Optimization of parameters for Biosorption of Cr(III) by Aspergillus niger. Training Report (TR). NML, Jamshedpur.

Abhilash, (2009) Studies on adaptive tolerance of aspergillus niger and penicillium species on hexavalent chromium and its applications in biosorption. Training Report (TR). NML, Jamshedpur. (Submitted)

Abhilash, (2011) Studies on isolation of micro-organisms from soil sample and their tolerance with metal ions. Training Report (TR). NML, Jamshedpur. (Submitted)

Acharya, Bishnu (2011) Electrochemical study of organic and inorganic hybrid coatings on Al-7075 (STR). Training Report (TR). NML, Jamshedpur. (Submitted)

Agarwal, Anup and Saha, Sudhir and Tarafder, Mita (2011) Is Fractal dimension a true quantifier of microstructure? Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Anand, Kshitiz and Malathi, M (2011) Mathematical Modelling of Heat Transfer and Solidification during continuous Casting of Steel. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

B

Bagui, S and Narasaiah, N and Bar, H N and Das, Swapan K and Parida, N and Upadhyay, A K and Sharma, R K (2011) Evaluation of Center Buffer Coupler. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Bairwa, Rajdeep and Kishore, Kaushik (2011) Analysis of strain hardening behaviour of high performance TWIP,TRIP and FBDP Steels-I. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

Bar, H N and Sahu, J K and Parida, N and Gunjan, M K (2011) Failure Investigation of Components of Aero Engine No. HDR-80376U. Consultancy (CNP). National Metallurgy Laboratory, Jamshedpur. (Submitted)

Bar, H N and Sahu, J K and Parida, N and Gunjan, M K (2011) Failure Investigation of Components of Aero Engine No. HDR-80376U. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Bhattacharjee, Gaurav and Das, Avimanyu (2011) Benefication of Low Grade Iron Ore. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

D

Deshmukh, Rajesh D and Humane, M M (2011) XRD Analysis of Cold Rolled and Annealed High Strength-Formable Steel Sheets. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Dey, Shobhana and Mohanta, M K and Bhattacharyya, K K and Bhagat, R P and Rao, K V and Singh, Ratnakar and Das, Avimanyu and Mehta, K D and Alex, T C and Mohanty, Sunati and Singh, Ranjeet K (2011) Beneficiation and pelletisation of lateritic iron ore from Kahnwara, Katni. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Dhayal, Ashok Kumar and Pramanick, A K (2011) Oxide Layer Formation on Al-Si-Zr Alloy using Anodizing process. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

G

Ghosh, M and Husain, M M and Das, G and Das, S K and Upadhyay, A K and Singh, S R and Parida, N (2011) Metallurgical Analysis:Flying Accident to Mig-27 ML TS - 579. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Ghosh , M and Husain, M M and Das, G and Das, S K and Upadhyay, A K and Singh, S R and Parida, N (2011) Metallurgical Analysis : Ground Incident to MIG-27 ML TS-615. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

H

Husain, Md Murtuja and Munda, Parikshit and Prakash, Amit and Parida, N and Singh, S R (2011) Identification of bomb scraps from Srimohangarh (Rajasthan)(TMP-0172). Other (TMP). National Metallurgy Laboratory, Jamshedpur, Jamshedpur. (Submitted)

K

Kaushik, Rahul K (2011) Tensile behaviour of metallic materials and alloys. Training Report (TR). National Metallurgy Laboratory, Jamshedpur.

Kishore, Braj and Jha, Manis K (2011) Recovery of Nd from Nd-Fe-B magnet scrap of computer Hard Disk Drive. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Kisku, Nicky and Sau, D C (2011) Recovery of tungsten and copper from tungsten copper alloy. Training Report (TR). National Metallurgical Laboratory, Jamshedpur, Jamshedpur. (Submitted)

Kumar, Raj and Kumar, Vinay (2011) Solvent Extraction of Cu/Li from the Leach Liquor of Spent Batteries of used Electronic devices. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Kumari, Chitra (2011) Biomimetic synthesis of aqueous ferrofluids using different polymers (STR). Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

M

Meena, Harikesh and Hembram, Khelaram (2011) Study Of Metal Extraction and Forming. Training Report (TR). National Metallurgical Laboratory, Jamshedpur, Jamshedpur.

Metya, A K and Bar, H N and Parida, N and Das, S K (2011) Failure Analysis of Ball Clevis of 320KN Hardware Fittings. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Metya, A K and Rajinikanth, V and Prakash, Amit and Das, S K (2011) Failure Analysis of Compressor Blade of SU-30MKI(SB-142). Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Metya, A K and Rajinikanth, V and Prakash, Amit and Parida, N (2011) Metallurgical Analysis of 1st Stage LPC Compressor Blade of SU-30 MKI SB-062 (No.25). Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Mishra, D and Kumar, Rakesh and Sahu, K K and Agrawal, A (2008) Development of Process for Production of Chemical Manganese Dioxide (OLP-0055). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Mishra, D and Sahu, K K and Agrawal, A and Jana, R K (2010) Selective Reduction of Cu, Ni & Co from Aqueous Solutions through Hydrothermal Route for Production of Metal Powders. Collaborative (CLP). NML, NML, JSR. (Submitted)

Mishra, I B (2010) Investigation of concrete foundation to assess the cause of failure of the Transmission Tower of Power Grid Corporation Ltd. erected by KEC International Ltd near Bihar-Sharif in Bihar. Consultancy (CNP). National Metallurgy Laboratory, Jamshedpur. (Unpublished)

Mishra, Navya (2011) Synthesis of ferrofluids with collagen as a template-Biomolecular matrix mediated synthesis of ferrofluids. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

Munda, Parikshit and Das, Swapan K and Husain, Md Murtuja and Ghosh Chowdhury, S and Parida, N (2011) Failure Investigation of 1st Stage LPCR Blade Pertaining to Aero-Engine No. 8831010. Other (TMP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Munda, Parikshit and Das, Swapan K and Prakash, Amit and Ghosh Chowdhury, S and Parida, N (2011) Failure Investigation of 1st Stage Rotor Blade Pertaining to Aero-Engine No. HDR-80086U. Other (TMP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Munda , Parikshit and Das, Swapan K and Ghosh Chowdhury, S and Das, Goutam and Singh, S R (2010) Investigation on the Failure of Gear Pump. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Murmu, Laxmi and Ghosh Chowdhury, S and Gunjan, M K (2011) Project report on Microstructural Evolution of Ultra Fine Grained C-Mn Steel warm Rolling and Inter-Critical Annealed. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

N

Narasaiah, N and Das, Swapan K and Parida, N (2011) Report on failure analysis of connecting rod bolt. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Narasaiah, N and Das, Swapan K and Sahu, J K and Das, Goutam and Sharma, S K and Parida, N (2011) Evaluation of Center Buffer Coupler (Knuckle). Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Nath, S K (2011) Effect of Mechanical Activation on Synthesis and Properties of Cordierite (2MgO.2Al2O3.5SiO2). Exploratory (OLP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Nayak, B (2011) Characterization and liberation studies of kiriburu low grade iron ore. Training Report (TR). NML, Jamshedpur. (Submitted)

P

Palit Sagar, S and Murthy, G V S and Das, T K and Prakash, Amit (2011) Development of Ultrasonic Technique for Surface Crack Detection of Semi-HSS and HSS Rolls. Collaborative (CLP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Priyanka, and Garai, Subhadra (2011) Synthesis and Characterization of Nano Bio Ceramic/Bio Composites for Bone Tissue Regeneration. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

R

Rajinikanth, V and Munda, Parikshit and Mandal, D and Minj, R K and Das, Swapan K and Ghosh Chowdhury, S and Singh, S R (2009) Development and Evaluation of Wear Resistant Material. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Rajinikanth, V and Ray, Ajoy K and Das, Goutam and Ghosh, M and Das, Swapan K and De, P K (2008) Strain Hardening behavior of Al-Sc alloys. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Ravi Kumar, B and Murthy, G V S and Mahato, B and Metya, A and Gunjan, M K and Singh, S R (2011) Non-Destructive and Destructive Investigation of MLG Parts of MIG 29 Aircraft (TMP-0165). Other (TMP). National Metallurgical Laboratory (NML), Jamshedpur. (Submitted)

S

Sankara Narayanan, T S N and Satendra, Kumar (2008) Analysis of heavy metal present in blood samples. Sponsored (SSP). NML, Chennai Centre, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Evaluation of corrosion performance of reinforcement steel. Sponsored (SSP). NML, Chennai Centre, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2010) Evaluation of the fretting corrosion behaviour of surface modified CP-Ti for biomedical applications (OLP-0126). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Studies on the Electrochemical Behaviour of Ti-Mo Alloys In Fluoride Medium to assess their Suitability for Dental Implant Applications (OLP-0073). Exploratory (OLP). NML, NML, Chennai Centre. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sarode, Anurag (2011) Electrochemical study of organic and inorganic hybrid coatings on Al-7075 (STR). Training Report (TR). NML, Jamshedpur. (Submitted)

Sau, D C and Sengupta, Rajarshi and Bandopadhyay, D (2011) Development of Model for the Estimation of Coke Bed Voidage and the Liquid levels in the Blast Furnace Hearth. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Sengupta, Vivek (2011) Effect of Severe Plastic Deformation by High Pressure Torsion Process on Aluminium 6082 alloy. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

Sinha, Prayag and Jha, Manis K (2011) Solvent Extraction of Copper from Synthetic Solution of PCB Leach Liquor using LIX984N. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Sridhar, G and Gunjan, M K and Munda, Parikshit and Kumar, Pankaj and Roy, P K and Prakash, Amit and Sharma, R K and Singh, S R (2011) Root cause analysis of bucket stage III OF GT-2A. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Sridhar, G and Iyer, V Rama and Rao, V Rama Krishna (2000) Electro Slag cladding of Dissimilar steels and study of the bond interface (OLP-12731). Exploratory (OLP). National Metallurgy Laboratory, Jamshedpur, Jamshedpur. (Submitted)

Supriya, and Prakash, Amit and Metiya, Avijit and Palit Sagar, S (2011) Application of Ultrasonic Waves in Non-Destructive Testing and Evaluation. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

T

Tarafder, Mita and Pal, Sital K and Madhukar, A and Kundu, Sudip and Chatterjee, Kakali and Dash, Byomkesh (2011) Development and implementation of unified model for organizational information processing (OLP-12731). Exploratory (OLP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tarafder, Mita and Tarafder, S and Dash, Byomkesh and Dey, Swati and Sivaprasad, S and Das, Swapan K (2006) Modelling of Crack-tip Blunting using Finite Element Method (FEM) (GAP-0088). Grant in Aid (GAP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tiwari, Y N (2010) Assessment of SRT & Mechanical properties on boiler tubes. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tiwari, Y N and Guguloth, K (2011) Stress rupture properties on SA 209 grades (T1/T1a) of steel bloom sample. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tiwari, Y N and Roy, P K (2011) Assessment of mechanical properties of boiler tubes. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tiwari, Y N and Singh, S R and Parida, N and Roy, P K (2011) Stress rupture properties evaluation of service exposed boiler tubes. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

U

Upadhyay, Divyesh (2011) Microstructural analysis of 7075-Aluminium alloy. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

V

Verma, Devraj and Mishra, S K (2011) Deposition of Multilayered SI-C-N Nanocomposite Coatings from Single Target by Magnetron Sputtering for Engineering Applications. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Vikash, Avijeet and Metya, Avijeet and Palit Sagar, S (2011) Application of Ultrasonic Technique for Materials property evaluation. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)