| Login | Create Account | Upload Instructions |
Items where Subject is "Metallurgy"
Group by: Creators | Item Type Number of items at this level: 1789.
AAbhilash, and Dhal, B and Mehta, K D and Kumar, Vinay and Pandey, B D (2011) Bio-processing for metal extraction, recycling and effluent treatment- an overview. The Banaras Metallurgist, 16 ( ). pp. 109-115. Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2007) Biosorption of trivalent chromium from a model tanning solution by adapted aspergillus niger. In: Proceedings of Mineral Biotechnology-2007, 2007. Abhilash, and Pandey, B D (2011) Microbial synthesis of iron-based nanomaterials—A review. Bulletin of Material Science, 34 (2). pp. 191-198. Abhilash, and Pandey, B D and Ray, L (2010) Kinetics and mechanism of uranium bioleaching from a low grade indian ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Abido, A M (1969) Flotation characterisation of plagioclase feldspar. NML Technical Journal, 11 (2). pp. 25-29. Aborn, Robert H (1966) The role of selenium and tellurium in ferrous metals. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Abraham, M C and Ghosh, A (1973) Kinetics of Reduction of Iron Oxides and Ores by Carbon. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Achimovičová, M and Baláž, P and Rečnik, A and Kováč, J and Rečnik, A and Kováč, J and Feldhoff, A and Gock, E (2011) Mechanochemical synthesis of nanocrystalline lead selenide. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Addanki, S Rao and Lahiri, A K and Banerjee, T (1961) Corrosion of Nickel in Steam Condensate Containing Air and Carbondioxide. NML Technical Journal, 3 (4). pp. 21-24. Adhia, J D (1969) Characteristics of electrolytic cells. In: UNSPECIFIED. Adhia, J D (1969) Effect and Control of Impurities in Electrolytic Zinc Production. In: UNSPECIFIED. Adhia, J D (1969) First fluo-solid Roaster in India-design and Operation. In: UNSPECIFIED. Adhia, J D (1968) Paper Fluo-Solid Roaster in India Design and Operation. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Adhikari, U B and Das, S K and Banerjee, G (1998) Bonding of high fly ash content ceramic bodies at low temperatures. pp. 143-148. Agarwal, J C and Davis, W L (1962) Recent Advances in Blast-Furnace Technology. NML Technical Journal, 4 (4). pp. 23-30. Agate, A D (1973) Survey of Thiobacillus ferroxidans in solubilization of copper sulphide ores. NML Technical Journal, 15 (4). pp. 25-27. Agrawal, A and Bagchi, D and Kumari, S and Kumar, Vinay and Pandey, B D (2007) Recovery of nickel powder from copper bleed electrolyte of an Indian copper smelter by electrolysis. Powder Technology, 177 (3). pp. 133-139. Agrawal, A and Bagchi, D and Kumari, S and Pandey, B D (2009) An Overview of Process Options and behavioral Aspects of the Copper values recovered from the Copper Bleed Stream of a Copper Smelter developed at the National Metall-urgical Laboratory. Mineral Processing and Extractive Metallurgy (Trans. IMM C) . pp. 136-162. Agrawal, A and Ielea, S M and Pandey, B D and Kumar, Vinay and Premchand, (1997) Use of D2ehpa as an Extractant for the Recovery Of Cu, Ni, Co & Zn From Ammoniacal Leach Liquor of Sea Nodules. In: Proceedings of the Internatinal Conference on "Recent Advances in Metallurgical Processes" Golden Jubilee Celebrations, 1997, Department of Metallurgy, Indian Institute of Science, Bangalore. Agrawal, A and Kumari, S and Bagchi, D and Kumar, Vinay and Pandey, B D (2006) Hydrogen reduction of copper bleed solution from an Indian copper smelter for producing high purity copper powders. Hydrometallurgy, 84 (3-4). pp. 218-224. Agrawal, A and Kumari, S and Bagchi, D and Kumar, Vinay and Pandey, B D (2007) Recovery of copper powder from copper bleed electrolyte of an Indian copper smelter by electrolysis. Minerals Engineering, 20 (1). pp. 95-97. Agrawal, A and Kumari, S and Manoj, M K and Pandey, B D and Kumar, Vinay and Bagchi, D and Premchand, (2002) Seperation & Recovery of Copper & Nickel from Copper Bleed Stream by Solvent Extraction Route. In: International Symposium on Solvent Extraction, September 2002. Agrawal, A and Pandey, B D and Kumar, Vinay and Premchand, (1996) Solvent extraction in copper metallurgy recovery of acid and metals from copper bleed stream. In: Seminar on Recovery of Valuable By - Products from Intermediate Secondaries in Non-Ferrous Industries, 1996. Agrawal, A and Sahoo, K L and Ghosh, Sukomal and Pandey, B D (2002) Recovering Iron from Copper Slag. Foundry Management & Technology, October . pp. 16-21. Agrawal, A and Sahu, K K (2004) Adsorption kinetics for the removal of Co(II) and Zn(II) from wastewater by indion BSR - a chelating ion-exchange resin. Adsorption Science & Technology , 22 (2). pp. 107-118. Agrawal, A and Sahu, K K (2010) Treatment of Chloride Waste Pickle Liquor by Solvent Extraction for the Recovery of Iron. Mineral Processing and Extractive Metallurgy Review, 31 (3). pp. 121-134. Agrawal, B C and Herrschaft, Donald C (1968) A New Zinc Base Alloy - ILZRO 12. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Agrawal, B C and Herrschaft, Donald C (1969) A new Zinc-base alloy - ILZRO 12. In: UNSPECIFIED. Agrawal, B K and Menon, M P and Bhatnagar, P P (1960) Recovery of Vanadium Pentoxide from Vanadium Bearing Titaniferrous Magnetites Projected Pilot Plant Studies. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Agrawal, V K (1966) ACAR Conductors-A Techno-Economic Evaluation. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Ahmed, (1968) The Present Status and the Projected Programme of Zirconium Development in India. In: Symposium on Non-ferrous Metals Technology : Papers for the presentation, 4th - 7th Dec. I968, CSIR - National Metallurgical Laboratory, Jamshedpur. Ahmed, (1968) The Present Status and the Projected Programme on Niobium-Tantalum Metallurgy in India. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Ahuja, P L and Banerjee, T (1962) Structure of electrolytic silver-copper alloys. NML Technical Journal, 4 (2). pp. 15-20. Akerkar, D D and Shahani, M J (1970) Development of hydrochloric acid pickling of steel in India. NML Technical Journal, 12 (4). pp. 87-92. Alex, T C and Godiwalla, K M and Kumar, Sanjay and Jana, R K and Rao, A S and Singh, Manjit and Premchand, (2006) Studies on the extraction of manganese from sea nodule residue as ferrosilicomanganese. Steel Research International, 77 (3). pp. 147-151. Alex, T C and Kumar, Rakesh and Kailath, A J and Roy, S K and Mehrotra, S P (2010) Physicochemical changes during mechanical activation of boehmite. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2011) Anomalous reduction in surface area during mechanical activation of boehmite synthesized by thermal decomposition of gibbsite. Powder Technology, 208 (1). pp. 128-136. Ali, Malek and Basu, Projjal (2011) Synthesis of nanostructured titanium carbide from titanium oxide and Ferro-titanium through mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Alphonsa, J and Sinha, G and Kumar, A and Jhala, G and Tiwari, S K and Gupta, S and Rayjada, P A and Chauhan, N and Raole, P M and Mukherjee, S (2008) Effect of frequency on the properties of plasma nitrided AISI 4340 steel. Journal of Metallurgy and Materials Science, 50 (2). pp. 119-125. Alphonsa, J and Tiwari, S K and Jhala, G and Rayjada, P A and Raole, P M and Mukherjee, S (2005) Influence of alloying elements on the corrosion properties of steels during plasma nitriding process. Journal of Metallurgy and Materials Science, 47 (1). pp. 31-38. Altekar, V A (1975) Some problems of technology transfer in India. NML Technical Journal, 17 (3-4). pp. 9-12. Altekar, V A (1973) Sponge Iron Technology - Efforts at the National Metallurgical Laboratory. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Altekar, V A (1973) Welcome Address. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Altekar, V A (1973) Welcome Address on the inauguration of the Seminar on Bacterial leaching of ores. NML Technical Journal, 15 (4). pp. 1-2. Altekar, V A and Banerjee, S K and Ghose, B N and Bhattacharya, J (1981) Development of clad metals for various applications. NML Technical Journal, 23 (3-4). pp. 32-36. Altekar, V A and Gupta, K N and Paul, B K and Soni, V K (1973) Naphtha Reduction of Iron Ores to Sponge Iron in Continuous Vertical Reactor. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Altekar, V A and Kapoor, A N and Goswami, J and Singh, R S and Ghosh, S R and Ghosh, S B (1974) Some observations in the production of ferro-phosphorus in low shaft furnace. NML Technical Journal, 16 (3-4). pp. 27-34. Altekar, V A and Ravindran, P A and Vaidya, V V (1968) Some experiences in Electro-winning of Aluminium from fused Chloride bath. In: UNSPECIFIED. Aman, Noor and Mishra, T and Hait, Jhumki and Jana, R K (2011) Simultaneous photoreductive removal of copper (II) and selenium (IV) under visible light over spherical binary oxide photocatalyst. Journal of Hazardous Materials, 186 (12). pp. 360-366. Anand, Kshitiz and Malathi, M (2011) Mathematical Modelling of Heat Transfer and Solidification during continuous Casting of Steel. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted) Andersen, Hans Chr (1973) Submerged Arc Furnace, an Alternative for Smelting of Sponge Iron? In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Antia, Dara P (1957) The Aluminium Industry in India. In: UNSPECIFIED. Antoine, J and Astier, J (1973) The Increasing use of Prereduced Iron Ores in Electric Arc Furnaces. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Arora, K S and Pandey, S and Schaper, M and Kumar, Rajneesh (2010) Microstructure Evolution during Friction Stir Welding of Aluminum Alloy AA2219. Journal of Materials Science & Technology, 26 (8). pp. 747-753. Arora, S M and Gupta, P K (1969) Brittleness in Copper. In: UNSPECIFIED. Arora, S M and Gupte, P K (1968) Brittleness in Copper. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Arora, S M and Gupte, P K and Nijhawan, B R (1959) Linseed oil as an organic flux in hot-dip aluminising of steels. NML Technical Journal, 1 (3). pp. 9-16. Arora, S M and Kapoor, A N and Gupte, P K and Nijhawan, B R (1963) Atmospheric corrosion resistance of aluminised M.S. wire exposed to saline atmosphere at Visakhapatnam. NML Technical Journal, 5 (3). pp. 5-9. Arora, S M and Kapoor, A N and Gupte, P K and Nijhawan, B R (1961) Hot dip aluminising of M.S.Wire on Pilot Plant Scale. NML Technical Journal, 3 (4). pp. 4-9. Arora, S M and Kapoor, A N and Gupte, P K and Nijhawan, B R (1966) Substitution of galvanising by aluminising of steels. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Arthanareeswari, M and Sankara Narayanan, T S N and Kamaraj, P and Tamilselvi, M (2012) Polarization and impedance studies on zinc phosphate coating developed using galvanic coupling. Journal of coatings technology and research, 9 (1). pp. 39-46. Asnani, C K and Ramachandran, K and Sarma, G V S N and Kulkarni, A P (2002) Ultrasonic Cleaning and Re-use of HEPA Filters in Nuclear Fuel Manufacturing Facility. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25, January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur. Assis, R M and Lima, I A and Assis, P S (2000) Use of metallurgical silicon carbide by producing steels and use in the cupola furnace. Journal of Metallurgy and materials Science, 42 (4). pp. 279-281. Asundi, M K (1961) The Role of Light Metals in Nuclear Engineering. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Aush, S C and Sinha, P K and Sengupta, P L (1991) Production of Activated Manganese Dioxide. NML Technical Journal, 33 (3-4). pp. 24-29. Aush, S C and Sinha, P K and Sengupta, P L (1990) Production of Electrolytic and Activated Manganese Dioxide Simultaneously From a Single Flow Sheet. NML Technical Journal, 32 (1-4). pp. 40-46. BBabu, S R and Sengupta, M (1994) Techno-economics of using Sponge Iron. In: UNSPECIFIED. Backer de, M C C (1970) CNPM-The Belgian National Metallurgical Research Centre. NML Technical Journal, 12 (4). pp. 111-113. Bacon, N H (1958) Segregation and Internal Weakness in Forging Ingots. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Badami, G N (1961) Hazards from Frictional Sparks of Certain Light Alloys. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Bagchi, S and Raychaudhuri, K K and Raja, K (1973) Indian Coals for Sponge Iron Process. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Bahadur, Aruna (1999) Role of X-ray diffraction in evaluating component integrity. In: UNSPECIFIED. Bahadur, Aruna and Mohanty, O N (1994) Structure-property correlation in aluminized coatings. NML Technical Journal, 36 (1). pp. 31-38. Balakrishnan, T V and Vijayavargiya, M D (1968) Non-ferrous Metals and Alloys for use in the Indian Heavy Electrical Industry. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Balakrishnan, T V and Vijayavargiya, M D (1969) The role of non-ferrous metals in heavy electrical industry. In: UNSPECIFIED. Balaraju, J N and Narayanan, TSNS and Seshadri, S K (2003) Electroless Ni-P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816. Balarama-moorthy, K (1968) Current Trends in the Use of Zirconium Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Balasundaram, L J (1968) The Applicability of size-factor and Electron Concent-ration Concepts to Alloying behaviour of Copper. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Balasundaram, L J (1969) On the variation of saturation induction and expansion coefficients of iron with temperature. NML Technical Journal, 11 (1). p. 36. Baláž, Peter and Dutková, Erika (2011) Applied mechanochemistry of solids (a review). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Baldevraj, and Mudali, U Kamachi and Jayakumar, T (2004) R&D Challenges in the Technology of Fast Breeder Reactors for Energy Security in the Country. The excerpts of the lecture delivered by Dr. Baldev Raj . pp. 105-146. Ball, F A (1957) The welding of Monel & K-Monel. In: UNSPECIFIED. Balon, R and Poos, A (1963) Experience with a hundred percent pellet burden and a low slag volume. NML Technical Journal, 5 (2). pp. 17-24. Bandopadhyay, A (1998) Salient features of air pollution control technology in cupola furnaces. NML Technical Journal, 40 (3). pp. 69-76. Bandopadhyay, A and Ghoshal, T K and Singh, K K and Ramachandrarao, P (2000) Pollution prevention and control in metallurgical furnace -current status and strategies for cleaner environment. Journal of Metallurgy and materials Science, 42 (1). pp. 1-9. Bandopadhyay, A and Goswami, M C and Kumar, Sanjay (2005) Improvement of environmental performance of integrated steel sector through process integration & optimisation measures and innovative waste management practices. In: Emomami-2005, 2005, IATES, Bhubaneswar. Bandopadhyay, A and Majumdar, S K and Ghoshal, T K and Singh, K K and Ramachandrarao, P (1996) Investigations on the nature of pollution created by secondary re-rolling. NML Technical Journal, 38 (1). pp. 25-30. Bandopadhyay, A and Mishra, K K and Ramachandrarao, P (1996) Critical Issues in Controlling Suspended Particulate Matters (SPM) from Cupola Exit Gases. In: UNSPECIFIED. Bandopadhyay, A and Mishra, K K and Ramachandrarao, P (1996) Critical issues in controlling suspended particulate matters (SPM) from cupola exit gases. In: UNSPECIFIED. Banerjee, J and Chatterjee, G P (1966) Low carbon high chromium alloy without low carbon ferro-chrome. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Banerjee, Kalyani (1961) Some problems of documentation in scientific research. NML Technical Journal, 3 (2). pp. 13-18. Banerjee, N G (1959) Determination of gases in metals and alloys by vacuum technique. NML Technical Journal, 1 (4). pp. 28-33. Banerjee, N G (1960) Fabrication and working of the vacuum fusion apparatus for the determination of gases in metals and alloys. NML Technical Journal, 2 (4). pp. 10-14. Banerjee, N G (1959) Vacuum determination of hydrogen in steel. NML Technical Journal, 1 (3). pp. 17-21. Banerjee, Prasun and Ghosh, Gautam and Biswas, Salil K (2010) Measurement of dielectric properties of medium loss samples at X-band frequencies. Journal of Metallurgy and Materials Science, 52 (3). pp. 247-255. Banerjee, S and Banerjee, P (1969) Orientation dependence of stress corrosion crack in cold rolled alpha brass. In: UNSPECIFIED. Banerjee, S and Narayanan, P I A (1959) Processing of Magnetite Ores with particular reference to Salem Magnetite. NML Technical Journal, 1 (2). pp. 23-27. Banerjee, S K (2004) Order and Disorder in Alloys. In: The excerpt of the lecture delivered by D.S. Banerjee, 01/05/2003, Jamshedpur. Banerjee, Srikanta and Banerjee, P (1968) Orientation Dependence of Stress Corrosion Crack in Cold Rolled Alpha Brass. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Banerjee, T (1969) Closing Remark. In: UNSPECIFIED. Banerjee, T (1969) Greetings. In: UNSPECIFIED. Banerjee, T (1967) An outline of research and development work at the National Metallurgical Laboratory on non-ferrous metallurgy. NML Technical Journal, 95 (2). pp. 4-11. Banerjee, T (1968) Research and development work on non-ferrous minerals, metals and alloys at the National Metallurgical Laboratory. In: UNSPECIFIED. Banerjee, T (1968) Research and development work at the National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 17-20. Banerjee, T (1959) Structure of Electrolytic Alloys. NML Technical Journal, 1 (2). pp. 15-22. Banerjee, T (1966) Substitution of scarce non-ferrous metals. NML Technical Journal, 8 (2). pp. 4-9. Banerjee, T (1968) Welcome address. NML Technical Journal, 10 (3). pp. 5-7. Banerjee, T and Mishra, G (2000) Cathodic protection - A proven corrosion control means in immersed or buried pipelines in oil, natunatural. Journal of Metallurgy and materials Science, 42 (3). pp. 167-176. Bardgett, W E (1961) Research in the metallurgical industry. NML Technical Journal, 3 (3). pp. 4-14. Barraclough, K C (1958) The Effects of Hydrogen on Alloy Steel Production. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Basak, G and Sampath, V S and Bhatnagar, P P (1968) Recovery of Non-ferrous Metallic Values from Metallurgical Wastes. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Basak, G and Sampath, V S and Bhatnagar, P P (1969) Recovery on non-ferrous metallic values from metallurgical wastes. In: UNSPECIFIED. Basak, P and Saxena, B K and Das, B N (1968) Joining of Aluminium. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Basak, P and Saxena, B K and Das, B N (1968) Non-fusion joining of aluminium. In: UNSPECIFIED. Bashforth, G Reginald (1961) The Future of Electric Furnaces in the Metal Industries of India. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Basu, D K and Singh, M N and Dev, S C and Sivaramakrishnan, C S (2000) Corrosion of silver-containing brazing fillers and contact materials in different conditions. Corrosion Prevention & Control, 47 (3). 77-+. Basu, G and Mukherjee, J K and Banerjee, T (1970) Phase transformations in thermal copper-tin alloys. NML Technical Journal, 12 (2). pp. 53-60. Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N (1972) Utilization of zinc ash for production of electrolytic zinc. NML Technical Journal, 14 (3). pp. 102-104. Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N and Altekar, V A (1976) Recovery of elemental sulphur and copper values from chalcopyrite concentrates by direct leaching in ferric chloride solution. NML Technical Journal, 18 (3). pp. 29-33. Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N and Altekar, V A (1973) Utilisation of secondary zinc. NML Technical Journal, 15 (3). pp. 49-58. Basu, G S and Sharma, R P and Dhillon, A S (1996) Dust Collecting Technologies for Blast Furnace and Steel Melting Shops. In: UNSPECIFIED. Batra, N K (1990) Mathematical Modelling of Shaft based direct Reduction processes of Iron manufacture with Recirculation of Moisture free flue Gases. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Beck, T A and Bhandary, V S and Gupte, P K (1966) Study on the suitability of cellulose materials as core binders. NML Technical Journal, 8 (3). pp. 4-10. Beck, T A and Mohan, Jatinder and Gupte, P K (1963) Effect of copper on the annealing of white iron. NML Technical Journal, 5 (4). pp. 11-16. Behera, S K and Sukla, L B and Mishra, B K (2010) Leaching of nickel laterite using fungus mediated organic acid and synthetic organic acid: a comparative study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Benda, J (1969) Precision die-forging. NML Technical Journal, 11 (3). pp. 13-15. Berry, J G (1957) Refining of Non-Ferrous Metals. In: UNSPECIFIED. Besterci, Michal and Sülleiová, Katarína and Velgosová, Oksana (2011) Mechanical alloying of Al-C system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Bhagat, A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2003) Aging Behaviour in Copper Bearing High Low Alloy Steels. ISIJ International, 44 (01). pp. 115-122. Bhagat, R P (2010) Effect of Bed Height on Strength of Sinter and other Sintering Indices. Steel India, 33 (2). pp. 184-191. Bhagat, R P and Banerjee, B and Kunwar, R K (2001) Beneficiation tests on an Indian bauxite incorporating magnetic separation. Transactions of the Institution of Mining And Metallurgy Section C-Mineral Processing And Extractive Metallurgy, 110 . C165-C168. Bhagat, R P and Chattoraj, U S and Sil, S K (2006) Porosity of Sinter and its relation with the sintering indices. ISIJ International, 46 (11). pp. 1728-1730. Bhagat, R P and Pathak, P N (1996) The effect of polymeric dispersant on magnetic separation of tungsten ore slimes. International Journal of Mineral Processing, 47 (3-4). pp. 213-217. Bhagiradha Rao, E S and Pal, A T (1969) The applicability of size-factor and electron concentration concepts to alloying behaviour of copper. In: UNSPECIFIED. Bhagiradha Rao, E S and Pal, A T (1969) Effects of cooling rate on the formation of kappa phase in the CU-AI-Ni-Fe-Mn system. In: UNSPECIFIED. Bhagiradha Rao, E S and Pal, A T (1968) Effects of Cooling Rate on the Formation of Kappa Phase in the Cu-Al-Ni-Fe-Mn System. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Bhaskar Raju, G and Karuppiah, M T and Latha, S S and Priya, D L and Parvathy, S and Prabhakar, S (2009) Electrochemical pretreatment of textile effluents and effect of electrode materials on the removal of organics. Desalination, 249 (1). pp. 167-174. Bhaskar Raju, G and Prabhakar, S (2000) Beneficiation of fluorspar by column flotation. Minerals & Metallurgical Processing, 17 (3). pp. 167-172. Bhatnagar, Deepak and Biswas, Soumitra (1996) Environment and Waste Management in Metallurgical Industries - Role of databases. In: UNSPECIFIED. Bhatnagar, Deepak and Jancy, A (1998) Cobalt recovery from Metallurgical Wastes of Zinc Industry. In: UNSPECIFIED. Bhatnagar, P P and Banerjee, T (1957) Vaccum - A New Tool in Extractive Metallurgy. In: UNSPECIFIED. Bhatnagar, S S and Kaushal, D D (1957) Lattice Diffusion in Face-Centered Cubic Metals. In: UNSPECIFIED. Bhattacharjee, A K and Singh, I (1993) Studies on the workability of tafel technique for high potential scan rate electro-chemical polarisation of steel and zinc-coated steels in 3.5% NaCl solution. NML Technical Journal, 35 (3-4). pp. 55-61. Bhattacharjee, S and Bhattacharyya, G and Dasgupta, P and Mitra, A (1999) Amendment of flyash by vermitechnology for agricultural application. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Bhattacharya, D K (1999) Magnetic NDT for the characterization of industrial materials. In: UNSPECIFIED. Bhattacharya, D K (2001) Non-destructive techniques for microstructural and structural characterisation. In: UNSPECIFIED. Bhattacharya, H P and Debnath, P C (1969) Polographic Analysis of Zinc ore concentrates for the determination of Lead, Copper, Cadmium and Zinc. In: UNSPECIFIED. Bhattacharya, H P and Ghosh, A and Mukherjee, J K (1970) Investigations on molybdenum concentrates obtained from Rakha Mines. NML Technical Journal, 12 (2). pp. 40-43. Bhattacharya, J and Das, B N (1970) Evaluation of manganese-copper-nickel alloys for use in thermobimetal. NML Technical Journal, 12 (1). pp. 9-11. Bhattacharya, M (2011) Chemical Synthesis and Characterization of Nickel Powder. Metallurgical and materials transactions B-Process metallurgy and materials processing science, 42 (2). pp. 380-384. Bhattacharya, U K and Gupta, B K (1959) Basic Electric Furnace Practice for Low Alloy Steels. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Bhattacharyya, A K (1968) Reclamation of Copper Base Scrap and Residues. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Bhattacharyya, A K (1969) Reclamation of copper-base scrap and residues. In: UNSPECIFIED. Bhattacharyya, H P (1968) Polarographic Analysis of Zinc Ore Concentrates for the Determination of Lead, Copper, Cadmium and Zinc. In: Symposium on Non-ferrous Metals Technology : Paper for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Bhattacharyya, P and Sarkhel, B R and Chakrabarti, D M and Saha, P and Ghosh, S R and Chattoraj, U S (1996) Gravity Separation at Variable 'g' for Management of Mineral Wastes and Pollution. In: UNSPECIFIED. Bhattacharyya, P and Sarkhel, B R and Maulik, S C (1998) Efficacy of multi-gravity separator in recovery of values from waste using experimental design. NML Technical Journal, 40 (4). pp. 109-114. Bhattacharyya, P and Singh, R and Sil, S K and Sengupta, S K and Saha, P and Srivastava, J P and Maulik, S C (2002) Reduction of Environment Pollution in Processing of Barite. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Bhattacharyya, S K (2000) Technology strategy to meet challenges in steel. Journal of Metallurgy and materials Science, 42 (3). pp. 133-137. Bhattamishra, A K (1997) Microstructural studies on the effect of Si and Cr on the intergranular corrosion in Al---Mg---Si alloys. Materials & Design, 18 (1). pp. 25-28. Bhattamishra, A K and Chattoraj, I and Basu, D K and De, P K (2000) Study on the influence of the Si/Fe ratio on the corrosion behaviour of some Al-Fe-Si alloys. Zeitschrift Fur Metallkunde, 91 (5). pp. 393-396. Bhattamishra, A K and Lal, Kishori and Sivaramakrishnan, C S (1996) Effect of Si/Mg ratio on the corrosion behaviour of Al-Mg-Si alloys for automotive applications. NML Technical Journal, 38 (3). pp. 101-106. Bhatwadekar, R G and Ramanujam, S (1953) Service Failures of Railway Materials. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Bhaya, H (1973) Speech Delivered. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Bhende, Vinay P (1963) Development Planning in under developed countries. NML Technical Journal, 5 (4). pp. 4-10. Bhoi, B and Murthy, B V R and Datta, P and Rajeev, and Jouhari, A K (1997) Studies on Aluminothermic Reduction of Manganese ore for Ferro-Manganese Making. In: UNSPECIFIED. Bhoray, S S and Sampath, V S and Bhatnagar, P P (1969) Studies on deslication of siliceous bauxite from Kashmir. NML Technical Journal, 11 (2). pp. 30-35. Bhuniya, A K and Datta, S and Chattopadhyay, P P and Banerjee, M K (2002) Effect of Trace Addition on the Microstructural Degradation of Cu-Zn-AI Shape Memory Alloy. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Bhurat, M C and Dwivedy, K K and Jayaram, K M V and Dar, K K (1973) Some results of microbial leaching of Uranium ores samples from Narwapahar, Bhatin and Keruadungri, Singhbhum District, Bihar. NML Technical Journal, 15 (4). pp. 47-51. Bishop, Tom (1958) Recent Developments in Alloy and Special Steels in Great Britain. In: Symposium on Production, Properties & Applications of Alloy & Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Biswas, A C and Bhattacharya, H P (1969) Rapid method for the complete analysis of ferro-chrome slag. NML Technical Journal, 11 (2). pp. 4-6. Biswas, A C and Bhattacharya, H P (1964) Rapid method for the determination of manganese in the manganese-bearing stainless steel. NML Technical Journal, 6 (3). pp. 15-17. Biswas, A C and Padhi, K K and Bhattacharya, H P (1976) Simultaneous sequential spectrophotometric method for the determination of silica and alumina in iron ores and sinters. NML Technical Journal, 18 (2). pp. 25-27. Biswas, D K and Goswami, N G (2003) Technology Evaluation : Experience and Few Case Studies. In: UNSPECIFIED. Biswas, J and Ranganathan, S and Singh, R J and Premchand, (1997) An Investigation on the benefication of a low-grade nickel ore by magnetic seperation after partial reduction. NML Technical Journal, 39 (3). pp. 167-175. Biswas, P K and Dev, S C and Godiwalla, K M and Sivaramakrishnan, C S (1999) Effect of some design parameters on the suspension characteristics of a mechanically agitated sand–water slurry system. Materials & Design, 20 (5). pp. 253-265. Biswas, R K and Jana, R K and Habib, M A and Hasan, M M (2006) Processing of copper dust for tolerable iron containing electrolyte. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 115 (4). pp. 234-240. Biswas, S C (1958) Practical Problems in the Manufacture of Alloy Steel. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Biswas, S K and Ghosh, S B and Chatterjee, A B (1972) Scrap-oxygen steelmaking in top-blown converter. NML Technical Journal, 14 (1). pp. 1-8. Biswas, Somjeet and Singh , Satyaveer D and Suwas, Satyam (2011) Microstructure and texture evolution of Pure magnesium during ecae. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Bjorling, G and Elfstrom, N G (1962) Electrolytic Manganese in a Non-Diaphragm Cell. NML Technical Journal, 4 (1). pp. 30-32. Blackburn, L D and Bonanno, F R and Burte, H M and Herzog, J A and Stuhrke, W F (1966) Metal matrix composite materials. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Bodas, M G and Dash, D R and Sivaramakrishnan, C S (1996) Oxidation of iron powder in a fluidized bed reactor. Materials & Design, 17 (3). pp. 167-172. Bodas, M G and Mathur, S B (2001) Treatment of vanadium pentoxide plant effluent by ion exchange process. Transactions of the Indian Institute of Metals, 54 (3). pp. 131-136. Bodas, M G and Saha, A K and Rao, Addanki S and Singh, M (2002) Chemical benefication of nickel overburden of Sukinda mining corporation. Transactions of the Indian Institute of Metals, 55 (6). pp. 557-560. Booth, N (1960) Pilot Plants in Pyrometallurgy. NML Technical Journal, 2 (1). pp. 47-51. Bose, A K (1994) Bonding of alumina. NML Technical Journal, 36 (3). pp. 95-103. Bose, A K and Chatterjee, B and Mathur, N N and Gupta, K N (1993) Refractory high (70-90%) alumina hydraulic cement. NML Technical Journal, 35 (1-2). pp. 13-18. Bose, A K and Rao, M R K (1981) Development of alumina foam insulation refractories. NML Technical Journal, 23 (3-4). pp. 43-45. Bose, B N (1966) Aluminium foil for electrical windings. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Bose, S C and Singh, Kulvir and Jayaraman, G and Venugopal, K (2000) Evaluation and establishment of short-term stress relaxation test methodology for predicting long-term creep life of steam turbine components. Journal of Metallurgy and materials Science, 42 (3). pp. 177-197. Bose, S K and Denanot, and Melle, M F and Caisso, J (1969) Observation of dislocation in some binary and ternary copper base alloys of F.C.C. structure. NML Technical Journal, 11 (2). pp. 15-20. Boteva, Antoaneta (2000) Characteristics of fine gold losses during processing of some copper ores. Journal of Metallurgy and materials Science, 42 (4). pp. 199-202. Brahma, P and Dutta, S (2011) Novel transport properties of nanostructured α-Fe2O3. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Brandes, Guenther and Rausch, Hans (1959) The Role of Mixing Methods and Mixer Designs in the field of Iron Ore Sintering. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Bricarelli, G (1959) International Metallurgical Classification : a Tool for Increasing, Efficiency in the Exchange of Experience in Iron and Steel Field. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Brisby, M D J (1960) The Development of a Steel Industry-Factors Affecting the Econonmics of Steel. NML Technical Journal, 2 (1). pp. 36-46. Broniewska, C and Mitra, M S (1953) Photoelastic Method for Stress Analysis. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Bucknall, E H (1958) Alloy Steels- Technical and Economic Background. In: Symposium on Production , Properties & Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Bucknall, E H (1957) Chromium - An Appreciation. In: UNSPECIFIED. Bucknall, E H (1953) Some aspects of the Flow & Fracture of Metals in Test & Service. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Bucknall, E H and Mitra, M S (1957) Utensils-The Major Non-Ferrous Industry of India. In: UNSPECIFIED. CCa, To Duy (1998) Effect of molybdenum on the formation of carbides and phases structure of 12Cr20Ni38Mo5-alloy. NML Technical Journal, 40 (3). pp. 87-94. Ca, To Duy (1998) Influence of rare earth metals on macrostructure of continuously cast steel rolling pipe. NML Technical Journal, 40 (2). pp. 57-62. Cadambe, V (1958) Application of Alloy Steels to Aircraft Industry. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Callender, W (1959) Studies in the Sintering Permeability and Pellet Strength of Australian Hematite Ores. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Callender, W (1959) Studies in the Sintering Permeability and Pellet Strength of Australian Hematite Ores. NML Technical Journal, 1 (1). pp. 47-58. Chaira, D and Mishra, B K and Sangal, S (2011) Synthesis and characterization of nanocrystalline carbides By reaction milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Chakrabarti, D M (1986) A computer programme for calculating free settling terminal velocities. NML Technical Journal, 28 (1-4). pp. 3-9. Chakrabarti, D M (2003) Customer Feedback in R&D Business. In: UNSPECIFIED. Chakrabarti, D M (2000) Simple Approach to Estimation of the Work Index. Transaction of the Institute Min. Metall.(Sect. C: Mineral Process. Extr. Metall, 109 (2). pp. 83-89. Chakraborty, A and Singh, U P (1993) An efficient technical information classification system. NML Technical Journal, 35 (3-4). pp. 63-69. Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2005) Investigations on the carbothermic reduction of chromite ores. Metallurgical and Materials Transactions B, 36 (4). pp. 437-444. Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2002) Reduction kinetics of iron and chromium in chromite ore. Journal of Metallurgy and materials Science., 44 (1). pp. 1-13. Chakraborty, M and Paramguru, R K and Jena, A K (2001) Electrochemical dissolution of nichrome in sulphuric acid. Hydrometallurgy, 59 (1). pp. 45-54. Chakraborty, S P and Choudhury, S K and De, P K and Dubey, R K (1986) Some observations on hot-forging characteristics of iron-powder preforms. NML Technical Journal, 28 (1-4). pp. 26-29. Chakraborty, S P and Dubey, R K and Gupte, P K (1971) Some observations on ausforming of high-carbon, high-chromium die steel. NML Technical Journal, 13 (2). pp. 52-57. Chakraborty, S P and Ghosh, S and Sivaramkrishnan, C S (1996) Advance in automotive castings. NML Technical Journal, 38 (3). pp. 113-115. Chakravarty, T K and Panigrahi, S K (1996) Strategies for Solid Waste Management in SAIL Steel Plants. In: UNSPECIFIED. Chandhok, Vijay K and Finlay, Walter L and Hubert, Paul (1961) The Status of Titanium in 1961-A New Structural Metal Starting Its Second Industrial Decade. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Chandra Dube, Mahendra (1957) Extraction & Refining of Aluminium. In: UNSPECIFIED. Chandramouli, V A and Balaramamoorthy, K and Kumar, J S (1968) Eddy Current Testing of Zircaloy Wires. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, CSIR - National Metallurgical Laboratory, Jamshedpur. Chandramouli, V A and Moorthy, K Balarama and Kumar, J S (1969) Eddy Current Testing of Zirconium Wires. In: UNSPECIFIED. Chandwani, H K and Vishwanathan, V and Mahadevan, H (1998) Environmental Issues to be Addressed in Indian Alumina Refineries and their Possible Solutions. In: UNSPECIFIED. Charles, J A (1959) Iron Pretreatment Research. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Charles, J A (1959) Iron Pretreatment Research. NML Technical Journal, 1 (1). pp. 68-79. Chattaraj, Mousumi and Sinha, N K (2004) Isolation and characterization of chemical constituent from the leaves of Cestrum nocturnum. Journal of Metallurgy and materials Science., 46 (4). pp. 243-245. Chatterjea, A B (1973) On Some Fundamental Aspects of Operational Parameters of Direct Reduction in Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Chatterjea, A B (1960) Pyrometallurgical Pilot Plants. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamedepur. Chatterjea, A B (1959) Technological Aspects of Low Shaft Furnace Process. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Chatterjea, A B and Nijhawan, B R (1959) Low Shaft Furnace Smelting of Pig Iron in India. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Chatterjea, A B and Nijhawan, B R (1957) Thermodynamic aspects of chemical Reactions, as applied to the smelting & Refining of lead. In: UNSPECIFIED. Chatterjee, A and Srikanth, S and Sanyal, S and Krishna, L and Anand, K and Subramanian, P R (2010) Kinetic Modeling of High Temperature Oxidation of Ni-base Alloys. Computational Materials Science . pp. 1-9. Chatterjee, A B (1973) Closing Remarks of National Seminar on Baterial Leaching. NML Technical Journal, 15 (4). 11- . Chatterjee, A B (1969) Smelting of iron ore fines with non-metallurgical fuels and blast additives: experimental trials for ten years in low-shaft furnace. NML Technical Journal, 11 (4). pp. 4-52. Chatterjee, A N and Banerjee, N G and Banerjee, T (1965) Determination of nitrogen in solid solution in steel by electro-chemical method. NML Technical Journal, 7 (3). pp. 4-6. Chatterjee, Amit (1990) Modelling of Rotary Kiln based Direct Reduction. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Chatterjee, Amit (1973) On Some Aspects of Basic Oxygen Steel Making with Prereduced Pellets. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Chatterjee, Amit (1994) The Role of Charge Materials in Alternative Routes to Steel. In: UNSPECIFIED. Chatterjee, Anjan K (2011) Enhancing the potential of industrial use of the Indian fly ashes through echano-chemical activation – prospects and problems. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Chatterjee, D P (1968) Role of Indian Ordnance Factories in the Development of some of the Important Cast and Wrought Aluminium Alloys during the last three decades. In: Symposium on Non-ferrous Metals Technology:Papers for Presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR), Jamshedpur. Chatterjee, D P and Moghe, D Y (1968) Role of Indian ordnance factories in the development and manufacture of some of the important cast and wrought aluminium alloys during the last three decades. In: UNSPECIFIED. Chatterjee, G P (1958) Development of Creep-Resistant Alloy Steels. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Chatterjee, G P (1959) Some Recent Trends on Iron and Steel Research and Control Methods. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Chatterjee, Kakali (2003) Rural Markets for Technologies - Present Indian Scenario. In: UNSPECIFIED. Chatterjee, U K and Sircar, S C and Banerjee, T (1969) Stress corrosion cracking of copper-manganese alloys-effect of some chemical variables. In: UNSPECIFIED. Chatterjee, U K and Sircar, S C (1968) Stress Corrosion Cracking of Copper-Manganese Alloys-Effect of Some Chemical Variables. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Chattopadhyay, A (1998) Microstructure and liberation characteristics of chalcopyrite concentrate from Indian Copper Complex, Ghatsila. NML Technical Journal, 40 (1). pp. 23-28. Chattopadhyay, A (2000) Remobilization and concentration of gold in banded iron formation from Ajjenahalli area, Tumkur District, Karnataka, India. Journal of Metallurgy and materials Science, 42 (1). pp. 53-64. Chattopadhyay, A and Banerjee, B and Maulik, S C (1996) Mineralogical evaluation of Zinc-lead ore from Ganesh Himal region of central Nepal. NML Technical Journal, 38 (4). pp. 169-173. Chattopadhyay, Lalitha (1996) Size effect on creep energy dissipation during stable crack growth. Engineering Fracture Mechanics, 54 (6). pp. 897-899. Chattopadhyay, R (1966) Improved mild steel for structural purposes. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Chattopadhyay, R and Guha, B K and Bhatnagar, S S (1968) The effect of normalising on the properties of low carbon vanadium-niobium-nitrogen structural steels. NML Technical Journal, 10 (1). pp. 10-14. Chattopadhyay, S (1990) Modeling Techniques for the Prediction of Phase Diagrams. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Chattopadhyay, S and Srikanth, S (1994) The CdSe-MnSe pseudobinary system(cadmium seleniummanganese selenium. Journal of Phase Equilibria, 15 (1). pp. 96-100. Chattopadhyay, S and Srikanth, S (1994) The Cu-Pb-Sn (copper-lead-tin) system. Journal of Phase Equilibria, 15 (5). pp. 553-557. Chattoraj, I and Bhattamishra, A K and Jana, S and Das, S K and Chakraborty, S P and De, P K (1996) The association of potentiokinetic reactivation and electrochemical pitting tests on a nitrogen bearing 19 Cr-17 Mn steel with its thermal history. Corrosion Science, 38 (6). pp. 957-969. Chattoraj, I and Das, Swapan K and Ravi Kumar, B and Bhattacharya, D K (1997) Corrosive degradation and failure of vertical furnace wall tubes of a boiler. Engineering Failure Analysis, 4 (4). pp. 279-286. Chattoraj, I and Mitra, A (1998) Changes in electrochemical responses of some Fe-B-Si-Cu-Nb alloys before and after devitrification. Scripta Materialia, 39 (6). pp. 755-761. Chattoraj, I and Rao, K R M and Das, Swapan K and Mitra, A (1999) Anodic reactions of amorphous and devitrified Fe–B–Si–Nb–Cu alloys in buffered chloride and fluoride. Corrosion Science, 41 (1). pp. 1-16. Chattoraj, I and Tarafder, Mita and Das, Swapan K and Tarafder, S (2003) Hydrogen induced brittle crack growth in Cu-strengthened HSLA-100 steels. Materials Science and Engineering A, 339 (1-2). pp. 136-149. Chaturvedi, P S (1968) On the Calculation of Economic cross-section for large D.C. busbars. In: UNSPECIFIED. Chaturvedi, P S (1968) On the Calculation of Economic current Density of Aluminium Cell Busbars. In: Symposium on Non-ferrous Metals Technology: Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR), Jamshedpur. Chaubey, A K and Mishra, B K and Mukhopadhyay, N K and Mukherjee, P S (2011) Effect of compact density and preheating temperature of the Al-Ti-C Preform on the fabrication of in-situ Mg–TiC composites. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Chaudhary, P N (1999) Dephosphorization of high carbon ferromanganese using BaCO3 based fluxes. PhD thesis, Indian Institute of Technology. Chaudhary, P N (2003) Transfer of know-how, the need for a holistic approach. In: UNSPECIFIED. Chaudhary, P N and Goel, R P (2001) Dephosphorisation of high carbon ferromanganese using BaCO3 based fluxes. Ironmaking & Steelmaking, 28 (5). pp. 396-403. Chaudhary, P N and Minj, R K and Goel, R P (2007) Development of a Process for Dephosphorisation of High Carbon Ferromanganese. In: Innovations in Ferro Alloys Industry, INFACON XI, 2007, India. Chaudhary, P N and Minj, R K and Krishna, Ram and Goel, R P (2004) Selective removal of phosphorus from high carbon ferromanganese - an improved process. Metals Materials and Processes, 16 (2-3). pp. 217-226. Chaudhary, P N and Pal, J (2002) An Overview of Treatment of Steel-Making Slag for Recovery of Lime Phosphorus Values. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Chaudhary, P N and Prasad, Sidheswar and Singh, U (1994) Effective utilisation of R&D results through feasibility report and detailed project report. NML Technical Journal, 36 (3). pp. 117-123. Chaudhary, S K (2001) Corrosion of Rails: Causes and its prevention. Journal of Metallurgy and materials Science, 43 (4). pp. 265-271. Chaudhary, S K (2002) Performance of sulphur concrete exposed to corrosive environment. Journal of Metallurgy and materials Science, 44 (4). pp. 223-229. Chaudhuri, B and Das, P P (1968) Effect of different variables on the precipitate-free zones adjacent to grain boundary regions on convention- ally quenched and aged Ai-Zn-Mg alloys. In: UNSPECIFIED. Chaudhuri, B and Das, P P (1968) Effect of different Variables on the Precipitate free Zones Adjacent to Grain Boundry Region in Conventionally Quenched and Aged AI-Zn-Mg Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Chaudhuri, S (2006) Some aspects of metallurgical assessment of boiler tubes—Basic principles and case studies. Materials Science and Engineering A, 432 (1-2). pp. 90-99. Chaudhuri, S and Roy, Nilima and Ghosh, R N (2000) Stress rupture ductility diagram - A diagnostic tool. ISIJ International, 40 (2). pp. 207-210. Chaudhuri, S P (1996) Automotive emission and control. NML Technical Journal, 38 (2). pp. 77-80. Chaudhuri, S P (2002) Microalloyed Steel: Its Enhancement in Properties by Thermomechanical Processing- A Case Study. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Chaudhuri, S P and Mishra, K K and Ramachandrarao, P (2000) Dry gas cleaning system for cupola : from concept to commissioning - a case study. In: UNSPECIFIED. Chaudhuri, Sulochana and Pandey, H D (1996) Advanced Instrumental Techniques for the Analysis of Trace Metals Released from Steel Industry with Special Reference to use of ICP-AES. In: UNSPECIFIED. Chauhan, Sandeep Kumar and Soni, P R (2011) Development of 2024 p/m aluminium alloy–SiCp nanocomposites via mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Chennakesavulu, K and Bhaskar Raju, G (2010) Mechanochemical Synthesis of p-Nitro Calix[6]arene. Asian Journal of Chemistry, 22 (6). pp. 4947-4949. Cherian, T V (1959) Columbium-Boron High-Tensile Steel. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Chester, J H (1960) The Encouragment of Productive Research. pp. 24-26. Chesters, J H (1960) The Encouragement of Productive Research. NML Technical Journal, 2 (4). pp. 24-26. Chopra, K L (2004) Nano-Materials and Nano-Technology. In: The excerpts of the lecture delivered by Prof. K. L. Chopra, 24/01/2003, Jamshedpur. Choubey, Pankaj K and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Leaching studies for the recovery of tin from the solder of waste printed circuit boards. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Choubey, R and Choudhuri, S and Das, B N and Nijhawan, B R (1966) Research and development work on substitute electrical resistance alloys for heating elements. In: Symposium on Metallurgy of Substitute ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Choubey, R and Nijhawan, B R and Gupte, P K and Das, B N and Bhatnagar, S S and Prasad, K (1966) Development of substitute high temperature creep resistant alloys. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Choudhuri, K C (1966) Indigenous substitution of import ed materials on Indian Railways. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Choudhuri, K C (1961) Possible Use of Light Alloys on Indian Railways. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Choudhuri, K C (1968) Role of Non-ferrous Metals and Alloys in Railway Engineering. In: Symposium on Non-ferrous Metals Technology : Paper for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Choudhury, K C (1968) Role of non-ferrous metals and alloys in Railway Engineering. In: UNSPECIFIED. Chowdhury, Susmita and Banerjee, M K and Singh, M N and Basu, D K (2001) Electrochemical studies on painted mild steel based on organic coatings in different media-paper-I. Journal of Metallurgy and materials Science, 43 (4). pp. 253-263. Coffer, L Wallace (1969) Extractive metallurgy Techniques possibly applicable in India. In: UNSPECIFIED. Coheur, P (1959) On the Bottom Blown Processes and the LD-AC Process. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Coheur, P (1959) On the Bottom Blown Processes and the LD-AC Process. NML Technical Journal, 1 (1). pp. 105-114. Colclough, T P (1959) Developments in Blast Furnace Practice. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Colclough, T P (1959) Developments in Blast Furnace Practice. NML Technical Journal, 1 (1). pp. 59-67. Collcutt, R H (1959) Operational Research in the Iron and Steel Industry. In: Symposium on Iron & Steel Industry in India organised by the National Metallurgical Laboratory, August '1959, NML, Jamshedpur. Contractor, G P (1947) National Metallurgical Laboratory of India. Nature, 159 (4033). pp. 219-221. Contractor, G P (1946) National Metallurgical Laboratory: Foundation-Stone Laying Ceremony, 21st November 1946. Journal of Scientific and Industrial Research, 5 (6). pp. 256-261. Cotton, R F and Franklin, A W (1953) Some Service Failures arising from Various Types of Corrosion. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Crafts, Walter and Hilty, D C (1958) Deoxidation and Inclusion Control for Alloy Steel. In: Symposium on Production, Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Csőke, B and Mucsi, G and Sík, Cs (2011) Production and practical application of mechanically activated fly ash-based binding material. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. DDar, K K (1957) Beryllium, Lithium & Magnesium & their Alloys, with Reference to the possibility of their Manufacture in India. In: UNSPECIFIED. Dar, K K (1973) Lecture-The role of biochemical processes in concentration of elements in nature and in extraction of metals from their ores. NML Technical Journal, 15 (4). pp. 7-10. Das, A K and Mukherjee, T (1996) Optimisation of Ferro Alloy Usage in Steelmaking. In: UNSPECIFIED. Das, A N and Srivastava, S C and Chatterjee, A K and Pandey, L P (1994) Wavelength dispersive x-ray fluorescence spectrometric analysis of the compositional constituents in blast furnace slag cements. NML Technical Journal, 36 (2). pp. 47-53. Das, B N (1966) Economic uses and substitution of non-ferrous metals and alloys. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Das, B N and Banerjee, S K (1966) Scope of aluminium base bearing alloys. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Das, B N and Basak, P and Nijhawan, B R (1962) Failure of a cold rolling mill roll-a case study. NML Technical Journal, 4 (3). pp. 4-7. Das, B N and Choubey, R and Goswami, K C (1960) Wear and Friction under Rolling with Slip. NML Technical Journal, 2 (4). pp. 15-21. Das, B N and Ghose, B N (1969) Investigation into the cause of failure of pinion shaft-a case study. NML Technical Journal, 11 (1). pp. 23-27. Das, B N and Ghosh, B N (1966) Failure of a Bucket Wheel Gear Drive Shaft - a Case Study. NML Technical Journal, 8 (3). pp. 15-18. Das, B N and Ghosh, B N (1966) Failure of a bucket wheel gear drive shaft-a case study. NML Technical Journal, 8 (3). pp. 15-18. Das, B N and Mitra, M S (1953) Residual Stress & its Effect on Service. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Das, Goutam (1999) Image analysis in quantitative metallography. In: UNSPECIFIED. Das, Goutam and Ghosh, Sabita and Bose, S C and Ghosh, Sukomal (2006) Use of ball indentation technique to evaluate room temperature mechanical properties of a gas turbine blade. Materials Science and Engineering A, 424 (1-2). pp. 326-332. Das, Goutam and Ghosh, Sukomal and Ghosh Chowdhury, S and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Investigation of sub-surface cracks in continuous cast billets. Engineering Failure Analysis, 10 (3). pp. 363-370. Das, Mousumi and Das, Goutam (2011) Role of dynamic precipitation on the strengthening mechanism of cryorolled 6063 Al alloy. Transactions of the Indian Institute of Metals, 64 (1-2). pp. 75-79. Das, N K and Balasundaram, L J (1973) High-strength Fe-Al-Si alloys. Indian Journal of Technology, 11 (12). pp. 628-634. Das, R R and Dubey, R K and Gupte, P K (1971) Studies on mould wall movement of nodular iron castings in green sand mould. NML Technical Journal, 13 (1). pp. 8-13. Das, S K (1968) Recent Developments in Slag-Fuming Process. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. I968, National Metallurgical Laboratory (CSIR), Jamshedpur. Das, S K and Kumar , Sanjay and Singh, K K and Ramachandrarao, P (1996) An Innovative Approach towards Utilisation of Wastes Generated from Iron & Steel Industries. In: UNSPECIFIED. Das, S K and Sarkar, S (1969) Recent developments in Slag-fuming process. In: UNSPECIFIED. Das, S N and Thakur, R S and Ray, H S (1998) Red Mud Pollution Problems : Some observations. In: UNSPECIFIED. Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) The effect of cooling rate on structure and properties of a HSLA forging. Scripta Materialia, 48 (1). pp. 51-57. Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) Microstructural characterization of controlled forged HSLA-80 steel by transmission electron microscopy. Materials Characterization, 50 (4-5). pp. 305-315. Das, Suchandan K (2001) Mathematical modelling of flow field in a continuous slab caster tundish including near wall turbulence effects. Transactions of the Indian Institute of Metals, 54 (1-2). pp. 21-26. Das, Suchandan K (2001) Tracking of solidification profile during continuous casting by a spline based collocation algorithm. Transactions of the Indian Institute of Metals, 54 (1-2). pp. 69-73. Das, Suchandan K and Godiwalla, K M (2006) Heat transfer characterization in the mould of a high speed continuous steel slab caster. In: 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, Jan, 2006, IIT Guwahati. Das, Suchandan K and Godiwalla, K M (2000) High speed continuous casting of steel - A technological challenge in India. Journal of Metallurgy and materials Science., 42 (2). pp. 81-92. Das, Suchandan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharyya, K K and Singh, Ratnakar and Mehrotra, S P (2007) Mathematical modeling of separation characteristics of a coal-washing spiral. International Journal of Mineral Processing, 84 (1-4). pp. 118-132. Das, Swapan K and Daspoddar, P K (1993) Some studies on the hydraulic activity of calcium aluminates. NML Technical Journal, 35 (3-4). pp. 29-38. Das, Swapan K and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2002) Evolution of microstructure in an ultra-low carbon Cu bearing HSLA forging. Scandinavian Journal Of Metallurgy, 31 (4). pp. 272-280. Das, Swapan K and Joarder, A and Mitra, A (2004) Magnetic Barkhausen emissions and microstructural degradation study in 1.25 Cr–0.50 Mo steel during high temperature exposure. NDT & E International, 37 (3). pp. 243-248. Das, Swapan K and Narasaiah, N and Sivaprasad, S and Chatterjee, S and Tarafder, S (2007) Effect of aging on fatigue crack growth behaviour of Cu bearing HSLA-100 steel. Materials Science and Technology, 23 (2). pp. 177-182. Das, Swapan K and Sasikumar, C and Ravi Kumar, B (2007) Failure of evaporator tubes initiated by lamellar tearing during the commissioning of a waste heat recovery boiler. Engineering Failure Analysis, 14 . pp. 262-278. Das , Debdulal and Chattopadhyay, P P (2002) A Study on the effect of Martensite Morphology on Mechanical Properties of High-Martensite Dual- Phase Steels. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Das , N K (1971) Some Experiences in Melting with Electron Beam Melting Furnace. NML Technical Journal, 13 (3). pp. 83-86. Das Gupta, N N and Banerjee, S and Chatterjee, N N (1960) Pilot Plant Studies on the Production of Metallurgical Coke. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedepur. Das Gupta, N N and Lahiri, A (1959) The size requirement of Blast Furnace Coke (1). In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Das Gupta, N N and Shrikhande, K Y (1959) The Problem of Supply of Coal for the New Steel Plants. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Das Gupta, S and Agrawal, J C and Roy, B (1973) Application of Solid Reductant Processes for Direct Reduction in India. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Dasgupta, S S (1999) Studies on Kolaghat Thermal Power Station fly ash with a view to set up a mechanised brick plant. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Dastur, M N and Lalkaka, R D (1959) The Design of Continuous Casting Plants for India. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Dastur, M N and Parthasarathy, C R and Roy, T K (1973) The Future of Direct Reduction Processes. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Datar, N S and Reddy, S C and Chattopadhyay, R and Guha, B K and Bhatnagar, S S (1974) Industrial scale trails on niobium treated high strength low alloy structural steel. NML Technical Journal, 16 (2). pp. 1-4. Dayal, P (1961) The Prospects of Aluminium in India. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Deb, Arnab and Sarma, Deepankar and Banerjee, M K (2005) Current attenuation test (Cat) survey for impressed current cathodic protection service for underground crude oil pipelines. Journal of Metallurgy and Materials Science, 47 (4). pp. 207-214. Deb, M K and Verma, D and Verma, S K and Bodhankar, N and Sircar, J K (2010) Quantitative analysis of inorganic ions in soil employing diffuse reflectance Fourier transform infrared spectroscopy (DRS-FTIR). Journal of the Indian Chemical Society, 87 (11). pp. 1317-1327. Deb, P and Ghosh, S and Basumallick, A (2001) Preparation of nano-sized CoFe2O4 particles from a non-aqueous precursor. Journal of Metallurgy and materials Science, 43 (2). pp. 113-117. Debnath, P C and Banerjee, N G and Kar, B C (1963) Determination of hydrogen in metals and alloys by carrier gas method. NML Technical Journal, 5 (3). pp. 25-27. Debnath, P C and Banerjee, N G and Kar, B C (1963) Determination of Hydrogen in Metals and Alloys by carrier gas method. NML Technical Journal, 5 (3). pp. 25-27. Descovich, S and Pompilo, L (1959) Impact of Wire Rod Rolling Mill Mechanisation on Job Requirements. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Deshmukh, Rajesh D and Humane, M M (2011) XRD Analysis of Cold Rolled and Annealed High Strength-Formable Steel Sheets. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted) Deshpande, K G (1998) Use of spent Potlining from the Aluminium Electrolytic cell as an additive to Arc Furnace Steel Melting and Cupola iron Melting in Steel industries. In: UNSPECIFIED. Dev, S C (1953) Some Characteristic Service Failures of Rails. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Dev, S C (1953) Some Observations on Failures in Aircraft Engines & Fuselage Parts. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Dey, A K and Singh, D D N (1993) Role of alcohols on dissolution of 70/30 brass in HNO3-H2SO4 bath. NML Technical Journal, 35 (3-4). pp. 39-43. Dey, K C and Sharma, V (2008) Copper (II) substituted heterpoly molybdate and tungstate of the keggin type anion [Xn+M12O40]-(8-n) : Their synthesis and characterization. Journal of Metallurgy and Materials Science, 50 (1). pp. 53-56. Dhal, B and Abhilash, and Mehta, K D and Pandey, B D (2009) Biological remediation of trivalent chromium from effluents. In: International conference of Non-ferrous metals 2009, July 10-11, 2009, Bhubaneswar. Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2011) Bioremediation of CR(VI) from Contaminated Chromite Mine Overburden Soil and its Management. In: 15th International Conference on Nonferrous Metals 2011, 8-9 July 2011, Kolkata,India. Dhananjayan, N (1970) Mechanism of Electrodeposition of Manganese in Alpha and Gamma Modifications. Electrochemical Science, 117 (8). pp. 1006-1011. Dhananjayan, N and Chakrabarti, H K and Banerjee, T (1960) Production of Manganese and Manganese Dioxide - Pilot Plant Investigations. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Dhanjal, S S and Rao, C A Naresh and Rao, G N and Altekar, V A (1977) Heat resistant cast iron. NML Technical Journal, 19 (2). pp. 29-32. Dhaon, D K (1973) Inaugural Address on the National Seminar on Bacterial Leachning. NML Technical Journal, 15 (4). pp. 5-6. Dhindaw, B K and Sircar, S C (1968) Kinetics and Mechanism of Sulfation Reactions. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Dhindaw, B K and Sircar, S C (1969) Kinetics and Mechanism of Sulfation Reactions during roasting of Sulfides. In: UNSPECIFIED. Digges, Thomas G (1958) Boron Steels. In: Symposium on Production, Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Digges, Thomas G (1961) Research on Light Metals in the Metallurgy Division, National Bureau of Standards. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Digges, Thomas G (1961) Research on Light Metals in the Metallurgy Division, National Bureau of Standards. NML Technical Journal, 3 (1). pp. 22-28. Dighade, R R and Ambekar, S V and Pande, A M (1999) Flyash lime gypsum bricks - A boon for Vidarbha region. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Director, Deputy (1973) Vote of Thanks. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR- National Metallurgical Laboratory, Jamshedpur. Director, NML (1961) Abstracts of Papers. NML Technical Journal, 3 (1). pp. 11-21. Director, NML (1960) Abstracts of Papers. NML Technical Journal, 2 (1). pp. 2-10. Director, NML (1962) Abstracts of Papers. NML Technical Journal, 4 (1). pp. 11-19. Director, NML (1966) Abstracts of Papers - Symposium on metallurgy of substitute ferrous and non-ferrous alloys. NML Technical Journal, 8 (1). pp. 12-23. Director, NML (1964) Abstracts of papers - Symposium on utilisation of metallurgical wastes. In: Symposium on utilisation of metallurgical wastes, March 10, 1964, Jamshedpur. Director, NML (1964) Abstracts of papers -- Symposium on Micro-Metallurgy - The Role of Minute Additions to Ferrous and Non-ferrous Metals and Alloys. NML Technical Journal, 7 (1). pp. 14-26. Director, NML (1964) Abstracts of papers- Symposium on Utilization of Metallurgical Wastes. NML Technical Journal, 6 (1). pp. 18-29. Director, NML (1963) Abstracts of papers-Symposium on iron and steelmaking. NML Technical Journal, 5 (1). pp. 14-23. Director, NML (1975) Abstracts of Papers-Symposium on Problems in Transfer of Technology from R&D Laboratory to Industries. NML Technical Journal, 17 (3-4). pp. 6-8. Director, NML (1954) Annual Report 1954. NML, Jamshedpur. Director, NML (1958) Annual Report 1957-1958. NML, Jamshedpur. Director, NML (1959) Annual Report 1958-1959. NML, Jamshedpur. Director, NML (1960) Annual Report 1959-1960. NML, Jamshedpur. Director, NML (1961) Annual Report 1960-1961. NML, Jamshedpur. Director, NML (1962) Annual Report 1961-1962. NML, Jamshedpur. Director, NML (1963) Annual Report 1962-1963. NML, Jamshedpur. Director, NML (1964) Annual Report 1963-1964. NML, Jamshedpur. Director, NML (1965) Annual Report 1964-1965. NML, Jamshedpur. Director, NML (1966) Annual Report 1965-1966. NML, Jamshedpur. Director, NML (1967) Annual Report 1966-1967. NML, Jamshedpur. Director, NML (1968) Annual Report 1968-1969. NML, Jamshedpur. Director, NML (1970) Annual Report 1969-1970. NML, Jamshedpur. Director, NML (1971) Annual Report 1970-1971. NML, Jamshedpur. Director, NML (1972) Annual Report 1971-1972. NML, Jamshedpur. Director, NML (1973) Annual Report 1972-1973. NML, Jamshedpur. Director, NML (1974) Annual Report 1973-1974. NML, Jamshedpur. Director, NML (1975) Annual Report 1974-1975. NML, Jamshedpur. Director, NML (1976) Annual Report 1975-1976. NML, Jamshedpur. Director, NML (1977) Annual Report 1976-1977. NML, Jamshedpur. Director, NML (1978) Annual Report 1977-1978. NML, Jamshedpur. Director, NML (1979) Annual Report 1978-1979. NML, Jamshedpur. Director, NML (1980) Annual Report 1979-1980. NML, Jamshedpur. Director, NML (1981) Annual Report 1980-1981. NML, Jamshedpur. Director, NML (1982) Annual Report 1981-1982. NML, Jamshedpur. Director, NML (1983) Annual Report 1982-1983. NML, Jamshedpur. Director, NML (1984) Annual Report 1983-1984. NML, Jamshedpur. Director, NML (1985) Annual Report 1984-1985. NML, Jamshedpur. Director, NML (1986) Annual Report 1985-1986. NML, Jamshedpur. Director, NML (1987) Annual Report 1986-1987. NML, Jamshedpur. Director, NML (1968) Awards, Honours and Nominations. NML Technical Journal, 10 (3). pp. 33-37. Director, NML (1960) Basic Characteristics. Foundry Moulding sands of India . pp. 12-15. Director, NML (1960) Bonding Clays. Foundry Moulding Sands . pp. 144-170. Director, NML (1968) Commercial Processes and Techniques developed at the National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 39-41. Director, NML (1969) Creep Testing. NML Technical Journal, 11 (3). 3- . Director, NML (1960) Crude Silica Sands. Foundry Moulding Sands of India, ( ). pp. 71-94. Director, NML (2012) CSIR-NML Exhibition Materials. [Show/Exhibition] Director, NML (1959) Demonstration of Patented Process. NML Technical Journal, 1 (3). pp. 7-8. Director, NML (1962) Developments in Iron and Steel making. NML Technical Journal, 4 (3). 3- . Director, NML (2010) Director's Desk. NML, Jamshedpur. Director, NML (2011) Director's Desk. National Metallurgy Laboratory, Jamshedpur, Jamshedpur. Director, NML (2011) Director's Desk - 60th RC Meeting of CSIR-NML. CSIR-National Metallurgy Laboratory, Jamshedpur. Director, NML (2011) Director's Desk - 60th RC Meeting of CSIR-NML (Hindi Version). CSIR-National Metallurgy Laboratory, Jamshedpur. Director, NML (2012) Director, NML (2012) Director's Desk - 61st RC Meeting of CSIR-NML (English Version). CSIR -National Metallurgical Laboratory, Jamshedpur. Director, NML (1967) Ferro Alloys. NML Technical Journal, 9 (4). 3- . Director, NML (1961) Ferro-Alloy Industry in India. NML Technical Journal, 3 (3). 2- . Director, NML (1961) Ferro-Alloy Industry in India. NML Technical Journal, 3 (3). 3- . Director, NML (1962) Ferro-Alloy Industry in India. NML Technical Journal, 4 (2). 3- . Director, NML (1962) Ferrro Alloy Symposium. NML Technical Journal, 4 (1). 3- . Director, NML (1966) Fighting Against Corrosion. NML Technical Journal, 8 (4). 3- . Director, NML (1966) Fighting Against Corrosion. NML Technical Journal, 8 (4). 3- . Director, NML (1967) Fluorspar. NML Technical Journal, 9 (3). 3- . Director, NML (1966) Foreign Colloboration. NML Technical Jounal, 8 (3). 3- . Director, NML (1969) Foreword. NML Technical Journal, 11 (4). 3- . Director, NML (1960) High Silica Sands. Foundry Moulding Sands of India . pp. 96-137. Director, NML (1959) India 1958 Exhibition. NML Technical Journal, 1 (2). 44- . Director, NML (1968) Indian Foundry Bentonite Clays. NML Technical Journal, 10 (2). p. 35. Director, NML (1965) Indian Metallurgists and the Present Emergency. NML Technical Journal, 7 (4). 3- . Director, NML (1963) International Symposium on Iron and Steelmaking. NML Technical Journal, 5 (2). 3- . Director, NML (1960) Introduction. Foundry Moulding Sands of India, ( ). pp. 1-2. Director, NML (2011) la vintage metallurgie : 60 years of marriage of science to industry. In: la vintage metallurgie. National Metallurgical Laboratory, Jamshedpur, pp. 1-416. Director, NML (1960) Light Metal Industry in India. NML Technical Journal, 2 (2). 3- . Director, NML (1960) Light Metal Industry in India. NML Technical Journal, 2 (2). 6- . Director, NML (1961) Light Metal Industry India. NML Technical Journal, 3 (2). 3- . Director, NML (1961) Light Metal Symposium. NML Technical Journal, 3 (1). 1- . Director, NML (1959) List of Delegates. NML Technical Journal, 1 (1). pp. 121-127. Director, NML (1964) List of Delegates. NML Techincal Journal, 6 (1). pp. 60-66. Director, NML (1962) List of Delegates Attending the Symposium on "Ferro Alloy Industry in India" from overseas and outside Jamshedpur. NML Technical Journal, 4 (1). pp. 51-55. Director, NML (1961) List of Delegates Attending the Symposium on "Light Metal Industry in India" from overseas and Outside Jamshedpur. NML Technical Journal, 3 (1). pp. 73-76. Director, NML (1966) List of Delegates attending the Symposium on Metallurgy of Substitute Ferrous and Non-ferrous Alloys. NML Technical Journal, 8 (1). pp. 81-84. Director, NML (1965) List of Delegates Attending the symposium on Micro-metallurgy. NML Technical Journal, 7 (1). pp. 71-74. Director, NML (1960) List of Delegates Attending the Symposium on Pilot Plants in Metallurgical Research and Development from Overseas and Outside Jamshedpur. NML Technical Journal, 2 (1). pp. 60-64. Director, NML (1998) List of NML Technical reports. National Metallurgical Laboratory, Jamshedpur. Director, NML (1959) Low Shaft Furnace Pilot Plant. NML Technical Journal, 1 (2). pp. 11-14. Director, NML (1967) Manufacture of Special Ferro-Alloys-Process developed at the National Metallurgical Laboratory. NML Technical Journal, 9 (3). 30- . Director, NML (1964) Metallurgical Wastes. NML Technical Journal, 6 (2). 5- . Director, NML (1960) Methods of Testing. Foundry Moulding Sands of India, ( ). pp. 16-23. Director, NML (1964) Micro-Metallurgy. NML Technical Journal, 6 (3). 5- . Director, NML (1965) Micro-Metallurgy. NML Technical Journal, 7 (2). 3- . Director, NML (1959) N.M.L. - a year in retrospect. NML Technical Journal, 1 (2). pp. 4-5. Director, NML (1965) Naptha injection trials at National Metallurgical Laboratory, Jamshedpur. NML Technical Journal, 7 (1). pp. 65-70. Director, NML (1967) National Metallurgical Laboratory Foundry Stations. NML Technical Journal, 9 (4). 32- . Director, NML (1960) Natural Moulding Sands. Foundry Moulding Sands of India . pp. 24-70. Director, NML (2010) NML Diamond Jubilee Souvenir. In: NML Diamond Jubilee Souvenir. National Metallurgy Laboratory, Jamshedpur. Director, NML (1989) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-12. ISBN 0972-4265 Director, NML (1987) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-4. Director, NML (1987) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-4. Director, NML (1987) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-4. Director, NML (1987) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-6. Director, NML (1988) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-6. Director, NML (1988) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-16. Director, NML (1988) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-12. Director, NML (1994) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-4. Director, NML (1994) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-4. Director, NML (1994) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-4. Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-16. ISBN 0972-4265 Director, NML (2000) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-16. ISBN 0972-4265 Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-16. ISBN 0972-4265 Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-12. ISBN 0972-4265 Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-8. ISBN 0972-4265 Director, NML (2004) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-12. ISBN 0972-4265 Director, NML (2004) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-8. ISBN 0972-4265 Director, NML (2004) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-8. ISBN 0972-4265 Director, NML (1966) NML Processes and Patents. NML Technical Journal, 8 (4). pp. 38-39. Director, NML (1975) NML Silver Jubilee Souvenir (1950-1975). In: NML Silver Jubilee Souvenir (1950-1975). NML, Jamshedpur. Director, NML (2010) NML Technology Handbook. National Metallurgical Laboratory, Jamshedpur. Director, NML (2010) NML: Glimpses of Life and Times. In: NML Diamond Jubilee Celebrations, Nov 26-27, 2010, NML Jamshedpur, India. Director, NML (1962) Non-Ferrous Metal Industry in India. NML Technical Journal, 4 (4). 3- . Director, NML (1963) Non-ferrous Metals and Substitute Alloys. NML Technical Journal, 5 (4). 3- . Director, NML (1967) Non-ferrous metals technology. NML Technical Journal, 9 (2). 3- . Director, NML (1959) Notes and news. NML Technical Journal, 1 (2). pp. 41-43. Director, NML (1959) Notes and News. NML Technical Journal, 1 (3). pp. 37-42. Director, NML (1959) Notes and news. NML Technical Journal, 1 (4). pp. 41-49. Director, NML (1960) Notes and News. NML Technical Journal, 2 (2). pp. 32-42. Director, NML (1960) Notes and News. NML Technical Journal, 2 (2). pp. 26-33. Director, NML (1960) Notes and News. NML Technical Journal, 2 (4). pp. 27-32. Director, NML (1961) Notes and News. NML Technical Journal, 3 (2). pp. 36-44. Director, NML (1961) Notes and News. NML Technical Journal, 3 (3). pp. 32-37. Director, NML (1961) Notes and News. NML Technical Journal, 3 (4). pp. 25-27. Director, NML (1962) Notes and News. NML Technical Journal, 4 (2). pp. 39-42. Director, NML (1962) Notes and News. NML Technical Journal, 4 (3). pp. 33-37. Director, NML (1962) Notes and News. NML Technical Journal, 4 (4). pp. 31-34. Director, NML (1963) Notes and News. NML Technical Journal, 5 (2). pp. 38-40. Director, NML (1963) Notes and news. NML Technical Journal, 5 (3). pp. 32-35. Director, NML (1963) Notes and News. NML Technical Journal, 5 (4). pp. 33-35. Director, NML (1964) Notes and news. NML Technical Journal, 6 (2). pp. 39-41. Director, NML (1964) Notes and news. NML Technical Journal, 6 (4). pp. 31-33. Director, NML (1965) Notes and news. NML Technical Journal, 7 (2). pp. 25-27. Director, NML (1965) Notes and News. NML Technical Journal, 7 (3). pp. 28-31. Director, NML (1965) Notes and News. NML Technical Journal, 7 (4). pp. 20-22. Director, NML (1967) Notes and News. NML Technical Journal, 9 (1). pp. 35-36. Director, NML (1967) Notes and News. NML Technical Journal, 9 (2). pp. 35-37. Director, NML (1960) Occurance. Foundry Moulding Sands of India . pp. 3-11. Director, NML (1959) Ourselves. NML Technical Journal, 1 (1). 3- . Director, NML (1968) Patents of National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 47-51. Director, NML (1960) Pilot Plant Symposium. NML Technical Journal, 2 (1). iii- . Director, NML (1968) Pilot Plants at National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 53-62. Director, NML (1960) Pilot Plants in Metallurgical Research and Development. NML Technical Journal, 2 (2). 3- . Director, NML (1967) Process Developed at the National Metallurgical Laboratory - Production of Graphite Crucibles(Carbon and Clay bonded). NML Technical Journal, 9 (4). 31- . Director, NML (1968) Process developed at the National Metallurgical Laboratory - Flux for submerged Arc welding. National Metallurgical Laboratory, Jamshedpur. (Submitted) Director, NML (1967) Process Developed at the National Metallurgical Laboratory : Modification of Aluminium Silicon Alloys-Indian Patent No.76415. NML Technical Journal, 9 (2). 34- . Director, NML (1968) Process developed at the National Metallurgical Laboratory for Commercial Exploitation. NML Technical Journal, 10 (2). pp. 4-6. Indian Patent Nos. 58869 & 62352 (1967) Process developed at the National Metallurgical Laboratory: Production of Graphite Crucibles (Carbon and Clay bonded) - India Patents No. 58869 & 62352. Indian Patent Nos. 58869 & 62352. Director, NML (1968) Processes developed at the National Metallurgical Laboratory for Commercial Exploitation. National Metallurgical Laboratory, Jamshedpur. Director, NML (1969) Profile of Prof. V.A. Altekar-Our New Director. NML Technical Journal, 11 (3). 4- . Director, NML (1962) Programme - Symposium on Ferro Alloy Industry in India. NML Technical Journal, 4 (1). pp. 4-10. Director, NML (1968) Publications of National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 81-82. Director, NML (1959) Recent Developments. NML Technical Journal, 1 (2). pp. 45-47. Director, NML (1959) Recent Developments. NML Technical Journal, 1 (3). pp. 46-54. Director, NML (1959) Recent Developments. NML Technical Journal, 1 (4). pp. 51-62. Director, NML (1960) Recent Developments. NML Technical Journal, 2 (2). pp. 43-52. Director, NML (1960) Recent Developments. NML Technical Journal, 4 (2). pp. 33-37. Director, NML (1961) Recent Developments. NML Technical Journal, 3 (2). pp. 45-54. Director, NML (1961) Recent Developments. NML Technical Journal, 3 (3). pp. 38-41. Director, NML (1961) Recent Developments. NML Technical Journal, 3 (4). pp. 28-31. Director, NML (1962) Recent Developments. NML Technical Journal, 4 (2). pp. 43-44. Director, NML (1962) Recent Developments. NML Technical Journal, 4 (3). pp. 38-40. Director, NML (1962) Recent Developments. NML Technical Journal, 4 (4). pp. 35-40. Director, NML (1963) Recent Developments. NML Technical Journal, 5 (2). pp. 41-43. Director, NML (1963) Recent Developments. NML Technical Journal, 5 (3). pp. 36-39. Director, NML (1963) Recent Developments. NML Technical Journal, 5 (4). pp. 36-39. Director, NML (1964) Recent Developments. NML Technical Journal, 6 (2). pp. 42-45. Director, NML (1964) Recent Developments. NML Technical Journal, 6 (3). pp. 25-26. Director, NML (1964) Recent Developments. NML Technical Journal, 6 (4). pp. 34-35. Director, NML (1965) Recent Developments. NML Technical Journal, 7 (3). pp. 32-33. Director, NML (1967) Research for Industry. NML Technical Journal, 9 (1). 3- . Director, NML (1964) Research in Standardization. NML Technical Journal, 6 (4). 3- . Director, NML (1961) Science's Return from Technology. NML Technical Journal, 3 (4). 3- . Director, NML (1959) Scope of Pilot Plants. NML Technical Journal, 1 (3). 3- . Director, NML (1970) The SCRATA Process for the Fumeless Decarburization of Steel by Oxide Injection. NML Technical Journal, 12 (4). 114- . Director, NML (1968) The Set up of the National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 21-32. Director, NML (1968) Silver Jubilee of Council of Scientific and Industrial Research. NML Technical Journal, 10 (3). 3- . Director, NML (1968) Some Important Projects of National Metallurgical Laboratory. NML Technical Journal, 10 (3). pp. 79-80. Director, NML (1968) Some Major Technical Consultancy Provided in Recent Years. NML Technical Journal, 10 (3). pp. 43-46. Director, NML (1968) Special Equipment Available at National Metallurgical Laboratory for Research and Service Facilities. NML Technical Journal, 10 (3). pp. 63-78. Director, NML (1960) Special Sands. Foundry Moulding Sands of India . pp. 138-143. Director, NML (1959) Statistics. NML Technical Journal, 1 (2). 48- . Director, NML (1959) Statistics. NML Technical Journal, 1 (3). pp. 55-59. Director, NML (1959) Statistics. NML Technical Jounal, 1 (4). pp. 63-67. Director, NML (1960) Statistics. NML Technical Journal, 2 (3). pp. 42-45. Director, NML (1960) Statistics. NML Technical Journal, 2 (4). pp. 38-40. Director, NML (1961) Statistics. NML Technical Journal, 3 (2). pp. 55-56. Director, NML (1961) Statistics. NML Technical Journal, 3 (3). 42- . Director, NML (1961) Statistics. NML Technical Journal, 4 (3). pp. 32-33. Director, NML (1962) Statistics. NML Technical Journal, 4 (2). pp. 45-46. Director, NML (1962) Statistics. NML Technical Journal, 4 (3). pp. 41-43. Director, NML (1963) Statistics. NML Technical Journal, 5 (3). 40- . Director, NML (1963) Statistics. NML Technical Journal, 5 (4). 40- . Director, NML (1964) Statistics. NML Technical Journal, 6 (3). 27- . Director, NML (1964) Statistics. NML Technical Journal, 6 (4). 36- . Director, NML (1965) Statistics. NML Technical Journal, 7 (2). 28- . Director, NML (1965) Statistics. NML Technical Journal, 7 (4). 23- . Director, NML (1967) Statistics. NML Technical Journal, 9 (1). 37- . Director, NML (1967) Statistics. NML Technical Journal, 9 (2). 38- . Director, NML (1970) Studies on the Precipitation of AIN in Mild Steel. NML Technical Journal, 12 (1). pp. 29-31. Director, NML (1965) Substitute Alloys. NML Technical Journal, 7 (2). 3- . Director, NML (1966) Substitute Alloys. NML Technical Journal, 8 (2). 3- . Director, NML (1960) Summary and Recommendations. Foundry Moulding Sands . pp. 171-180. Director, NML (1963) Symposium on Iron and Steelmaking. NML Technical Journal, 5 (1). 3- . Director, NML (1961) Symposium on Light Metal Industry in India. NML Technical Journal, 3 (1). pp. 4-10. Director, NML (1961) Symposium on Light Metal Industry in India. NML Technical Journal, 3 (2). pp. 4-6. Director, NML (1964) Symposium on Metallurgical Wastes. NML Technical Journal, 6 (1). 7- . Director, NML (1966) Symposium on metallurgy of substitute ferrous and non-ferrous alloys. NML Technical Journal, 8 (1). pp. 4-11. Director, NML (1965) Symposium on micro-metallurgy. In: Symposium on micro-metallurgy - The role of minute additions to ferrous and non-ferrous metals and alloys, March 29-April 1, 1965, Jamshedpur. Director, NML (1965) Symposium on Micro-Metallurgy. NML Technical Journal, 7 (1). 5- . Director, NML (1965) Symposium on Micro-Metallurgy-The Role of Minute Additions to Ferrous and Non-Ferrous Metals and Alloys. NML Technical Journal, 7 (1). pp. 6-13. Director, NML (1960) Symposium on Pilot Plants in Metallurgical Research and Development. NML Technical Journal, 2 (1). iv-x. Director, NML (1960) Symposium on Pilot Plants in Metallurgical Research and Development. NML Technical Journal, 2 (2). pp. 4-7. Director, NML (1963) Symposium on Recent Developments in Iron and Steelmaking with Special Reference to Indian Conditions. NML Technical Journal, 5 (1). pp. 4-12. Director, NML (1964) Symposium on Utilization of Metallurgical Wastes. NML Technical Journal, 6 (1). pp. 8-17. Director, NML (1959) Technical aid to Industry. NML Technical Journal, 1 (2). pp. 6-7. Director, NML (1960) Third five year plan. NML Technical Journal, 2 (4). 5- . Director, NML (1959) Training in Research. NML Technical Journal, 1 (4). 3- . Director, NML (1975) Twentyfive Years of National Metallurgical Laboratory. NML Technical Journal, 17 (3-4). pp. 3-5. Director, NML (1963) Utilisation of Metallurgical Wastes. NML Technical Journal, 5 (3). 3- . Director, NML (1963) Utilisation of Metallurgical Wastes. NML Technical Journal, 5 (3). 4- . Director, NML (1968) Utilization of Indigenous Technology. NML Technical Journal, 10 (1). 3- . Director, NML (1969) Utilization of Low-grade Copper Ores. NML Technical Journal, 11 (2). 3- . Director, NML (1966) Welcome to the Delegates. NML Technical Journal, 8 (1). 3- . Director , NML (1959) Pilot Plants in Metallurgical Research and Development. NML Technical Journal, 1 (3). 5- . Director , NML (1960) Recent Developments. NML Technical Journal, 2 (3). pp. 34-41. Director , NML (1959) Symposium on Iron and Steel Industry in India. NML Technical Journal, 1 (2). pp. 8-10. Dogan , Ali and Aslantas, M and Havvatoglu, Y (2001) Investigation of magnetostriction strain for martensitic phase transformation FCC to FCT. Journal of Metallurgy and materials Science, 43 (1). pp. 1-7. DRL, Kanpur, (1966) Conservation of non-ferrous metals by protective treatments and substitution by alumimium. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Dubey, R K and Chakraborty, S P and Gupte, P K (1968) Effect of bainite on mechanical properties of nickel-chromium constructional alloy steels. NML Technical Journal, 10 (1). pp. 4-9. Dubey, R K and Das, A K and Gupte, P K and Nijhawan, B R (1966) Development of low tungsten substitute tool steels. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Dubey, R K and Gupte, P K (1967) Effect of chromium addition on transformation characteristics of nickel and manganese alloy steel. NML Technical Journal, 9 (3). pp. 8-14. Dutt, Ashimesh and Sen, P C and Rao, H V Bhaskar (1963) Mercury hydrometer for volume determination. NML Technical Journal, 5 (4). pp. 22-23. Dutta, B M and Bhaskar Rao, H V (1964) A comparative study of insulation refractories with special reference to thermal conductivity. NML Technical Journal, 6 (4). pp. 17-22. Dutta, B M and Ramakrishnan, M (1969) Development and properties of high calcium aluminate cements from indigenous raw materials. NML Technical Journal, 11 (2). pp. 7-14. Dutta, J and Bhattacharya, C and Sarkar, D and Bandyopadhyay, S (2002) Influence of PH and Chloride Concentration Concentration on the Corrosion Behavior of AL-6061 Alloy. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Dutta, K and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Influence of asymmetric cyclic loading on substructure formation and ratcheting fatigue behaviour of AISI 304LN stainless steel. Materials Science and Engineering A, 527 (29-30). 7571-7579 . Duy, P To and Lee, Z H (2004) Incluence of rare earth metals on non-metallic inclusion in 25Cr-7Ni-3Mo-0.25N duplex stainless steel. Journal of Metallurgy and materials Science., 46 (3). pp. 135-146. Duy, P To and Lee, Z H (2004) Modifying inclusion types and shapes by rare earth metals addition to low carbon steel. Journal of Metallurgy and materials Science., 46 (3). pp. 147-155. Dwivedy, K K and Bhurat, M C and Jayaram, K M V (1972) Heap and bacterial leaching tests on sample of low grade Uranium ore from Keruadungri, Singhbhum District, Bihar. NML Technical Journal, 14 (2). pp. 72-75. EEbrahimifar, Hadi and Zandrahimi, Morteza (2011) Electrical conductivity of interconnects in presence of two manganese spinel coatings. Journal of Metallurgy and Materials Science, 53 (4). pp. 405-410. Ebrahimifar, Hadi and Zandrahimi, Morteza (2010) Evaluation of electrical conductivity activation energy of manganese coated Fe-17%Cr ferritic stainless steel. Journal of Metallurgy and Materials Science, 52 (3). pp. 273-278. Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Manganese deposition of high temperature ferritic stainless steel interconnects. Journal of Metallurgy and Materials Science, 53 (4). pp. 419-425. Ebrahimifar, Hadi and Zandrahimi, Morteza (2010) Reduced parabolic rate constant at presence of Mn3O4 and MnFe2O4. Journal of Metallurgy and Materials Science, 52 (3). pp. 267-271. Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Studies on electrical resistance activation energy in presence of cobalt spinels. Journal of Metallurgy and Materials Science, 53 (3). pp. 319-324. Elango, A (2004) Corrosion behaviour of diffusion coatings deposited by slurry chromising, electro plating and aluminium spraying onto mild steel panel. Journal of Metallurgy and materials Science., 46 (2). pp. 123-133. Elango, A and Periasamy, V M and Paramasiv, M (2004) Polarization of 57S aluminium used as galvanic anode in 2M NaOH. Journal of Metallurgy and materials Science., 46 (4). pp. 247-252. Elena , V. Boldyreva (2011) Mechanochemistry of organic solids: where are we now? In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Engineer, B B (1973) Iron Ore Pre-Reduction. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Engineer, B B (1959) Principal mineral raw materials for iron and Steel Industry. In: Symposium on Iron & Steel Industry in India organised by the NML, August, 1959, NML, Jamshedpur. Eyre, J W (1960) Steel Melting in a Pilot Plant Shaft Furnace. In: Symposium on Pilot Plant Shaft Furnace, 15-18/02/1960, Jamshedplur. Ezz, S Y (1973) Possibilities of Production and use of Sponge Iron in the Arab Countries. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Ezz, S Y and Yousef, A A and Boulos, T R and El-Geassy, A A (1969) Magnetic roasting of some Egyptian Ferruginous Manganese Ores. In: UNSPECIFIED. Ezz, S Y and Yousef, A A and Boulos, T R and El-Geassy, A A (1968) Magnetic Roasting of Some Egyptian Ferruginous Manganese Ores. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. FFabián, Martin and Baláž, Peter and Briančin, Jaroslav (2011) Study of the silver ions cementation after mechanical activation of cementator. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Faivre, R and Bigot, R (1958) Studies on the Kinetics of very Rapid Cooling in Different Quenching Liquids- Application to Some Alloys of Iron, Nickel and Carbon. In: Symposium on Production, Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Floyd, John (1998) Pollution Control in the Non-Ferrous Industries - An Indian Perspective of Worldwide Importance. In: UNSPECIFIED. Foct, Jacques (2011) Specifics of mechanically driven atomic distributions In interstitial alloys. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Fontana, Mars G and Mitra, M S (1953) The Eight Forms of Corrosion & the Corrective Measures. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Frias, C and Raychaudhuri, A and Palma, J and Diaz, G (2002) Development of New-Concept Clean Technologies to Extract Metals from Primary and Secondary Sources. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Friščić, T and Jones, W (2011) Development of liquid-assisted grinding (LAG) for the synthesis of hydrogen-bonded and coordination frameworks. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. GGadsden, W R (1959) Production experience at Port Kembla with Coke made from "fine grind" Oiled Coal charges. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Gale, G E (1953) Corrosion and the Failure of Metals. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Gale , G E (1953) Corrosion in Boilers & Water Circulation Systems with Special Reference to Marine Installations. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Ganesh, R and Banerjee, S K and Narayanan, P I A (1968) Beneficiation Studies on Copper Ore Samples from Rajasthan. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Ganesh, R and Banerjee, S K and Narayanan, P I A (1969) Beneficiation studies on Copper ore samples from Rajasthan. In: UNSPECIFIED. Gangopadhyay, A K and Sahoo, K L and Kelton, K F (2011) Importance of solute-solute interactions on glass formability. Philosophical Magazine, 91 (17). pp. 2186-2199. Ganguly, Amit and Goswami, M (1984) Carbothermic Reduction of Sukinda Chromite Pellets followed by Leaching. Transactions of the Indian Institute of Metals, 37 (2). pp. 153-155. Ganguly, M L and Ghosh, P (1968) The role of non-ferrous metals and Alloys in Electrical Engineering Industries in particular relation to cable Industries. In: UNSPECIFIED. Ganguly, M L and Ghosh, P (1968) The Role of Non-ferrous Metals and Alloys in Electrical Engineering Industries in Particular Relation to Cable Industries. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Garber, S and Sturgeon, G M (1959) Scale on Wire Rod and its Removal by Mechanical Means. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Gauvry, Robert (1968) Aluminium Contribution to Building Industrialization in France. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboraory(CSIR), Jamshedpur. Gazder, Azdiar A and Florian, H Dalla Torre and Christopher, H J Davies and Pereloma, Elena V (2011) The microstructure, texture and mechanical properties of AS-ECAE Interstitial-free steel and copper. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Geoffroy, J and Meltzheim, C (1959) Principal aspects of investigations into fluidised carbonisation undertaken at the Marienau Experimental Station. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Ghandy, Jehangir (1969) Opening address. In: UNSPECIFIED. Ghandy, Sir J (1968) Opening address. NML Technical Journal, 10 (3). pp. 8-11. Ghaswala, S K (1961) Aluminium Structures General Aspects of Design. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Ghaswala, S K (1968) Role of Aluminium in constructional Engineering. In: UNSPECIFIED. Ghaswala, S K (1968) Role of Aluminium in Constructional Engineering. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR), Jamshedpur. Ghaswala, S K (1957) Structural Aluminium Industry. In: UNSPECIFIED. Ghatak, S K (2001) High temperature superconducting materials. Journal of Metallurgy and materials Science, 43 (2). pp. 67-75. Ghorai, Tanmay K and Pramanik, Panchanan (2011) Mechanochemical synthesis, characterization and photocatalytic Properties of M2O3/TiO2 (M = Fe, Mn) nano-composite under visible light. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Ghorpade, S Y (1997) Status of Ferrosilicon and Pig Iron Production by Electric Smelting under the Liberalized Economy. In: UNSPECIFIED. Ghose, B N and Bhattacharya, J and De, P K (1996) Enhancement of quality of steel sheet through process optimisation. NML Technical Journal, 38 (2). pp. 51-62. Ghose, H P and Krishnamachar, B S (1966) Substitution of scarce metals with special reference of standardisation in India. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Ghose, M K and Debnath, P C and Kar, B C (1964) Spectrochemical determination of antimony in lead-tin-solders. NML Technical Journal, 6 (3). pp. 6-9. Ghose, M K and Pait, S and Kar, B C (1961) Spectrographic analysis of high chromium-manganese austenitic stainless steel by porous cup technique using neutral filter. NML Technical Journal, 3 (4). pp. 10-15. Ghose, M K and Pait, S and Kar, B C (1960) Spectrographic determination of boron in steel by rotating electrode method. NML Technical Journal, 2 (3). pp. 12-14. Ghose, M K and Rajeev, and Gopalkrishna, S V (1978) X-ray fluorescence analysis of silica and alumina in some ores. NML Technical Journal, 20 (3-4). pp. 46-51. Ghosh, Arindam and Chatterjee, S and Mishra, B and Das, Samar (2005) Microstructure, properties, and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel. Metallurgical and Materials Transactions A, 36 (3). pp. 703-713. Ghosh, Arindam and Das, Samar and Chatterjee, S and Mishra, B and Ramachandrarao, P (2003) Influence of thermo-mechanical processing and different post-cooling techniques on structure and properties of an ultra low carbon Cu bearing HSLA forging. Materials Science and Engineering A, 348 (1-2). pp. 299-308. Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2004) An ultra low carbon Cu bearing steel: influence of thermomechanical processing and aging heat treatment on structure and properties. Materials Science and Engineering A, 374 (1-2). pp. 43-55. Ghosh, B and Chakraborty, P and Pal, P G and Mitra, S K (1994) Refractory Parctices in Electric Arc and Induction Furnaces. In: UNSPECIFIED. Ghosh, B N (1994) Refractories for Electric Arc Furnace. In: UNSPECIFIED. Ghosh, B N and Lal, Kishori and De, P K and Sivaramakrishnan, C S and Ramachandrarao, P (1996) Development of ferritic stainless steel for catalytic converter. NML Technical Journal, 38 (3). pp. 117-121. Ghosh, C and Pai, D R and Narasimham, B and Majumdar, K (1969) Benefication of low grade wolramite ore from Degana, Rajasthan. In: UNSPECIFIED. Ghosh, C and Pai, D R and Narasimham, J B and Majumdar, K K (1968) Beneficiation of Low Grade Wolframite Ore from Degana, Rajasthan. In: Symposium on Non-ferrous Metals Technology :Papers for Presentation, 4th - 7th Dec. 1968, CSIR - National Metallurgical Laboratory, Jamshedpur. Ghosh, M and Chatterjee, S (2005) Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel. Materials Characterization, 54 (4-5). pp. 327-337. Ghosh, M and Dutta, B K and Basumallick, A and Ghosh, S (2001) Preparation of copper-tin compacts by warm compaction route. Journal of Metallurgy and materials Science, 43 (2). pp. 119-125. Ghosh, M and Kar, A and Kumar, K and Kailas, S V and Das, S K and Ray, Ajoy K (2011) Evaluation of interface microstructure for friction stir welded aluminium-stainless steel plate. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Ghosh, M and Kumar, K and Mishra, R S (2010) Analysis of microstructural evolution during friction stir welding of ultrahigh-strength steel. Scripta Materialia, 63 (8). pp. 851-854. Ghosh, M K (1978) Applications of solution technique using synthetic standards in spectrochemical analysis. NML Technical Journal, 20 (1-2). pp. 6-14. Ghosh, M K (1978) Applications of solution technique using synthetic standards in spectrochemical analysis. NML Technical Journal, 20 (1-2). pp. 6-14. Ghosh, M K (1980) Spectrochemical analysis of aluminium. NML Technical Journal, 22 (1-2). pp. 20-23. Ghosh, M K (1983) Spectrochemical determination of silver in copper concentrate. NML Technical Journal, 25 (3-4). pp. 46-48. Ghosh, M K and Chakrabarti, H K (1970) Spectrographic analysis of nodular cast iron for magnesium. NML Technical Journal, 12 (4). pp. 97-100. Ghosh, M K and Gopalakrishna, S V (1970) Method of Spectrographic Analysis of Aluminium and Aluminium Alloys by Using Synthetic Standards. NML Technical Journal, 12 (2). pp. 61-64. Ghosh, M K and Rajeev, and Gopalkrishna, S V (1978) X-ray fluorescence analysis of silica and alumina in some ores. NML Technical Journal, 20 (3-4). pp. 46-51. Ghosh, N and Padhi, K K and Ghosal, S and Biswas, A C and Pandey, L P (1980) Determination of molybdenum and copper in Mu metal type alloy. NML Technical Journal, 22 (3-4). pp. 43-44. Ghosh, N K and Parthasarathy, L (2002) Atmospheric Pollution Control in Coke Ovens. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Ghosh, R N (2003) Identification of Novelty in R&D. In: UNSPECIFIED. Ghosh, R N (1957) Welding of Non-Ferrous Metals. In: UNSPECIFIED. Ghosh, Sourov and Sahu, Ranjan K and Raj, C Retna (2011) Shape-regulated high yield synthesis of electrocatalytically active branched Pt nanostructures for oxygen reduction and methanol oxidation reactions. Journal of Materials Chemistry, 21 (32). pp. 11973-11980. Ghosh , R N (1990) Some Aspects of Modelling of the High Temperature Mechanical Behaviour of Nickel Base Superalloys. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedepur. Ghosh Chowdhury, S (1999) X-ray diffraction: principles and its application to structural analysis. In: UNSPECIFIED. Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and Singh, Raghuvir (2011) Influence of Processing on Texture, Grain Boundary Structure and Corrosion Behaviour of Austenitic Stainless Steels. Steel Tech, 5 (4). pp. 43-57. Ghosh Chowdhury, S and Ray, R K and Jena, A K (2007) Deformation-induced structural transformation in boron-doped Ni76Al24. Intermetallics, 15 (3). pp. 260-269. Ghosh Chowdhury, S and Ray, R K and Jena, A K (1998) Rolling texture in the intermetallic compound Ni76Al24(B). Materials Science and Engineering A, 246 (1-2). pp. 289-301. Goel, D B and Saxena, M N (1969) Tempering characteristics of a Cu-AI-Ag Alloy. In: UNSPECIFIED. Goel, D B and Saxena, M N (1968) Tempering Characteristics of A Cu-Al-Ag Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Goel, Malti (1998) Reduction of Greenhouse Gas Pollution in Non-Ferrous Metal industry : Indian Perspective. In: UNSPECIFIED. Goel, R P (1994) Slag formation and control in electric furnace steel making. In: UNSPECIFIED. Goel, R P (1997) Smelting Technologies for Ferrochromium Production - Recent Trends. In: UNSPECIFIED. Goldsmith, F C (1957) Chemical Treatment of Molten Non-Ferrous Metals. In: UNSPECIFIED. Gopal, S R and Sharma, C M (1999) Use of fly ash as building materials. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Gopalkrishnan, N (1968) Aluminium in Engineering. In: UNSPECIFIED. Gopalkrishnan, N (1968) Aluminium in Engineering. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Gorai, Bipra and Jana, R K and Khan, Z H (2002) Electrorefining electrolyte from copper plant dust. Materials Transactions, 43 (3). pp. 532-536. Gorai, Bipra and Jana, R K and Premchand, (2003) Characteristics and utilisation of copper slag—a review. Resources, Conservation and Recycling, 39 (4). pp. 299-313. Gorai, Bipra and Jana, R K and Premchand, (2002) Reduction of Emission from Aluminium Industries and Cleaner Technology. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Goswami, B and Ray, Ashok K (2010) Emerging trends in precipitation phenomenon of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 52 (1). pp. 19-45. Goswami, B and Ray, Ashok K (2008) Perspectives of nanocrystalline materials and metallic glass in pure nickel and nickel base alloys. Journal of Metallurgy and Materials Science, 50 (4). pp. 195-217. Goswami, B and Ray, Ashok K (2009) Perspectives of shape memory surgical alloys in nickel base systems. Journal of Metallurgy and Materials Science, 51 (2). pp. 77-89. Goswami, J and Ghosh, S B and Chatterjee, A B and Altekar, V A (1972) Some observation on the production of iron powder by atomization. NML Technical Journal, 14 (3). pp. 94-101. Goswami, M C and Prakash, S (1999) Smelting Reduction Kinetics of Fluxed Composite Reduced Iron Pellets(FCIP). Tool & Alloy Steels, 32 ( ). pp. 11-19. Goswami, M C and Prakash, S and Sarkar, S B (1998) A reading system cold-model foaming study simulating in-bath smelting. Scandinavian Journal Of Metallurgy, 27 (3). pp. 97-102. Goswami, M C and Prakash, S and Sinha, S N and Tiru, P (1998) Experimental study on the foaming phenomena in a non-reacting system. NML Technical Journal, 40 (2). pp. 51-56. Goswami, M C and Singh, S D and Vaish, A K (1998) Smelting reduction of lean pyrite cynder of complex mineralogy for the production of low silicon ferro-alloys. Tool & Alloy Steels, 32 (3). pp. 9-14. Goswami, M C and Sinha, A K Mahapatra and Gupta, K N (1987) Iron ore sinter as iron burden in Indian blast furnaces. NML Technical Journal, 29 (1-4). pp. 33-38. Goswami, N G (1990) Annual Report 1987-1990. NML, Jamshedpur. Goswami, N G (1991) Annual Report 1990-1991. NML, Jamshedpur. Goswami, N G (1992) Annual Report 1991-1992. NML, Jamshedpur. Goswami, N G (1993) Annual Report 1992-1993. NML, Jamshedpur. Goswami, N G (1994) Annual Report 1993-1994. NML, Jamshedpur. Goswami, N G (1995) Annual Report 1994-1995. NML, Jamshedpur. Goswami, N G (1996) Annual Report 1995-1996. NML, Jamshedpur. Goswami, N G (1997) Annual Report 1996-1997. NML, Jamshedpur. Goswami, N G (1998) Annual Report 1997-1998. NML, Jamshedpur. Goswami, N G (1999) Annual Report 1998-1999. NML, Jamshedpur. Goswami, N G (2000) Annual Report 1999-2000. NML, Jamshedpur. Goswami, N G (2001) Annual Report 2000-2001. NML, Jamshedpur. ISBN 0972-4273 Goswami, N G (2002) Annual Report 2001-2002. NML, Jamshedpur. ISBN 0972-4273 Goswami, N G (2003) Annual Report 2002-2003. NML, Jamshedpur. ISBN 0972-4273 Goswami, N G (2004) Annual Report 2003-2004. NML, Jamshedpur. ISBN 0972-4273 Goswami, N G (2005) Annual Report 2004-2005. NML, Jamshedpur. ISBN 0972-4273 Goswami, N G (2006) Annual Report 2005-2006. NML, Jamshedpur. ISBN 0972-4273 Goswami, N G (2007) Annual Report 2006-2007. NML, Jamshedpur. ISBN 0972-4273 Goswami, N G (2008) Annual Report 2007-2008. NML, Jamshedpur. ISBN 0972-4273 Goswami, N G (2009) Annual Report 2008-2009. NML, Jamshedpur. ISBN 0972-4273 Goswami, N G (2003) Marketing : Business Promotion - Some Thoughts and a Few Case Studies. In: UNSPECIFIED. Grange, G and Jourdan, C (1969) Growth Mechanism of Helicoidal Nickel Whiskers. In: UNSPECIFIED. Grange, G and Jourdan, C (1968) Growth Mechanism of Helicoidal Nickel Whiskers. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Grieve, A and Ely, F (1960) The Role of the Pilot Plant in Iron ore Sintering. In: Symposium on the Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Grosdidier, T and Ji, G and Llorca, N (2011) On the processing of dense hetero-nanostructured metallic materials for improved strength / ductility balance by ecae and sps methods. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, CSIR-NML, Jamshedpur. Grover, H J and Hyler, W S (1953) Stress Concentrations: Their Effect on Design for Repeated Loading. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Guauvry, Robert (1968) Contribution of Aluminium to the development of large scale building construction in France. In: UNSPECIFIED. Guha, B K and Gupte, P K and Nijhawan, B R (1961) Failure of boiler tube by differential aeration corrosion. NML Technical Journal, 3 (4). pp. 16-20. Gupta, A K (1958) Oxygen in Foundry Steel-Making. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Gupta, K N (1971) Effect of titanium, aluminium & other additions on the solidification & structure of steel ingots. NML Technical Journal, 13 (1). pp. 14-18. Gupta, K N (1960) L-D and Basic Lined Side Blown Converter. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Gupta, K N and Chatterjee, A B (1968) Distribution characteristics of burden in low shaft furnace. NML Technical Journal, 10 (2). pp. 7-14. Gupta, K N and Padan, J S and Chatterjee, A B (1967) Evaluation of some properties of iron ore for blast furnace smelting. NML Technical Journal, 9 (3). pp. 15-19. Gupta, K N and Pande, A M and Vaish, A K (1994) Melting behaviour of sponge iron in induction furnace. In: UNSPECIFIED. Gupta, M K and Banerjee, T (1962) Thermal and Electrical conductivity of copper manganese alloys. NML Technical Journal, 4 (4). pp. 12-16. Gupta, M K and Banerjee, T (1962) Thermal and Electrical Conductivity of Copper-Manganese Alloys. NML Technical Journal, 4 (4). pp. 12-16. Gupta, M K and Kar, B C (1959) Spectrochemical analysis of aluminium alloys by oxide arc technique. NML Technical Journal, 1 (3). pp. 23-27. Gupta, M N (2003) Impediments in Technology Transfer. In: UNSPECIFIED. Gupta, P K (1990) Finite Elements Modelling of Forming Processes a State of the Art Review. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Gupta, P K (1965) Symposium on Micro-Metallurgy-The Role of Minute Additions to Ferrous and Non-Ferrous Metals and Alloys'-A Review. NML Technical Journal, 7 (2). pp. 4-9. Gupta, P K and Kulkarni, M R (1962) Symposium of ferro alloy industry in India-A Review. NML Technical Journal, 4 (2). pp. 4-11. Gupta, P K and Srivastava, K N (1961) Development of Light Metal Industry in India. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Gupta, R C (1994) Nitrogen as Substitute to Nickel While Preparing Stainless Steel in Mini Steel Plants Using Electric Arc/Induction Furnaces. In: UNSPECIFIED. Gupta, R C and Sant, B R (1973) Status of technology of biochemical leaching of low grade copper ores. NML Technical Journal, 15 (4). pp. 13-15. Gupta, R D and Chakravarty, D P and Chakravarty, R and Gupte, P K (1969) Study of microstructure of chill cast aluminium bronzes (Cu-AI-Fe-Mn). In: UNSPECIFIED. Gupta, R D and Gupte, P K and Chakravarty, D P and Chakravarty, R (1968) Study of Microstructure of Chill Cast Aluminium Bronzes (Cu-Al-Fe-Mn). In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Gupta, R D and Gupte, P K and Nijhawan, B R (1964) Production of low residual and soft iron. NML Technical Journal, 6 (4). pp. 4-11. Gupta, R D and Gupte, P K and Nijhawan, B R (1965) Some laboratory scale trials on electro-slag melting. NML Technical Journal, 7 (3). pp. 7-14. Gupta, R K (2003) Managing Intellectual Property. In: UNSPECIFIED. Gupta, R K and Mehrotra, S P and Gupta, Santosh K (2007) Evaluation and optimization of metal matrix composite strip produced by single roll continuous strip casting method. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 465 (1-2). pp. 116-123. Gupta, R N P and Rao, G N and Gupte, P K (1971) Chemical aspects of shell moulding resin and its use as a binder. NML Technical Journal, 13 (4). pp. 104-108. Gupta, S K and Tandon, J K and Ghorai, D N and Pal, P K and Sarkar, P K (2002) Transforming Steel Domain Green through Innovative Waste Management - A Jindal Approach. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Gupta, Santosh K and Bhat, Shrikant A (2004) Genetic Algorithm and Multi-objective Function Optimization with the Jumping Gene(Transposon) Adaptation-A Primer. In: The excerpts of the lecture clelivered by Prof, Santosli K. Gupta, 14/07/2003, Jamshedpur. Gupte, P K and Nijhawan, B R (1958) An Investigation into the Development of Prospective Indian Austenitic Stainless Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Gurevich , B I and Kalinkin, A M and Kalinkina, E V and Kalinnikov, V T (2011) Utilization of ferrous-magnesium slag for production of binding materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Guru Vittal, U K and Kumar, Sanjay (1999) Use of fly ash admixed concrete for pavement construction*. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Guru Vittal, U K and Murty, A V R S and Kumar, Sanjay (1999) Use of fly ash admixed concrete for pavement construction. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. HHait, Jhumki and Jana, R K and Kumar, Vinay and Dasgupta, P and Bandyopadhyay, M and Sanyal, S K (1998) Hydrometallurgical processing of anode slime for recovery of valuable metals. In: UNSPECIFIED. Haldar, R K and Lahiri, A K (1972) Observations on high temperature oxidation behaviour of some Fe-Cr-Al alloys. NML Technical Journal, 14 (3). pp. 108-109. Halder, B and Prakash, Ved (1962) Interface energy studies of some copper-nickel alloys containing a liquid phase. NML Technical Journal, 4 (3). pp. 13-17. Halliday, Iain M D (1960) Continuous Casting Development for Steel. In: Symposium on Pilot Plant in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Hargave, R V and Rao, M R K (1979) Mineralogy and liquidus behaviour of Indian blast furnace slags. NML Technical Journal, 21 (3-4). pp. 15-20. Harman, C N (1997) Status of Ferro Alloy Industry in the Liberalised Economy. In: UNSPECIFIED. Hart , D H (1960) The Role of Pilot Plant Investigation in the Development of Updraught Sintering of Broken Hill Lead Concentrate. NML Technical Journal, 2 (1). pp. 52-59. Havemann, H A (1959) Direct Iron Ore Reduction for Asia. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Hempel, Max and Houdremont, Eduard and Duesseldorf, (1953) Contribution to the Knowledge of Procedures going on during Cyclic Stressing of Materials. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Henry, G and Plateau, J (1963) Some Observations on a Cr-Mn-N Stainless Steel. NML Technical Journal, 5 (2). pp. 25-32. Hinde, J (1958) The Welding of Special and Alloy Steels. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Hoang, L L and Jeong, Jinki and Lee, Jae-chun and Pandey, B D and Yoo, Jae-Min and Trung, H H (2011) Hydrometallurgical Process for Copper Recovery from Waste Printed Circuit Boards (PCBs). Mineral Processing and Extractive Metallurgy Review, 32 (2). pp. 90-104. Hoar, T P and Hines, J G (1958) The Stress-Corrosion Cracking of Austentic Stainless Steels in Aqueous Chloride Solution. In: Symposium on Production, Properties and Appications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Holmes, G M (1962) Some Aspects of the Sampling and Analysis of Ferro Alloys. NML Technical Journal, 4 (1). pp. 33-40. Hori, Kazuo (1961) On the Movements of Absorbed Gases in Aluminium. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Humane, M M and Minj, R K and Paretkar, R K and Peshwe, D R (2010) Effect of cold rolling and mode of annealing on textures, mechanical properties and formability limit diagrams in interstitial free steel sheets. Transactions of the Indian Institute of Metals, 63 (6). pp. 867-880. Humane, M M and Minj, R K and Peshwe, D R and Paretkar, R K (2011) Texture and Formability of One-Step and Two-Step Cold-Rolled and Annealed Interstitial Free High-Strength Steel Sheets. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 42A (6). pp. 1692-1708. Humane, M M and Peshwe, D R and Paretkar, R K (2009) Optimizing Cold Rolling and Mode of Annealing of Interstitial-Free High-Strength Steel Sheets. Steel Research International, 80 (10). pp. 785-792. Hussain , Zuhailawati and Yusoff, Mahani (2011) In-situ formation of NbC in mechanically alloyed Cu-Nb-C At different temperatures. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. IImai, Y and Ishizaki, Tetsuro (1958) Influence of Nitrogen on the Low Temperature Brittleness of steel. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1958, NML, Jamshedpur. Imai, Y and Izumiyama, M and Tsuchiya, M (1965) On the transformation of austentite to martensite and tempering process of martensite in iron-nitrogen system. NML Technical Journal, 7 (1). pp. 49-53. Ineson, E and Hoyle, G (1958) The Cast Structure of High-Speed Steel. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Ishihara, Yoshio (1958) Progress of Special Steel-Making Process in Japan. In: Symposium on Production, Properties, and Applications, of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Iverson, H G (1960) Role of Metallurgical Pilot Plants in the United States. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. JJackson, A (1961) The Ajax furnace and process. NML Technical Journal, 3 (2). pp. 7-12. Jackson, A (1961) The Ajax Furnace and Process. NML Technical Journal, 3 (2). pp. 7-12. Jacob, K (1969) Air-borne survey for locating mineral resources: A new venture of high promise for speedy mineral exploration in India. In: UNSPECIFIED. Jacob, K T (2004) Fuel Cell : Efficient Power Sources of 21st Century. In: The excerpt of the lecture delivered by Prof. K. T Jacob, 28/05/2003, Jamshedpur. Jacob, K T and Srikanth, S (1987) Gibbs energy of formation of Au2Na = Energie de Gibbs de formation de Au2Na. Scripta Metallurgica, 21 (12). pp. 1649-1654. Jacob, K T and Srikanth, S (1990) Physical Chemistry of the Reduction of Calcium Oxide with Aluminum in Vacuum. High Temperature Materials and Processes, 9 (2-4). 77- . Jacob, K T and Srikanth, S (1988) Use of Metastable Equilibria for determination of Gibbs Energy of Solids. Journal of Materials Research, 3 (4). pp. 687-693. Jacob, K T and Srikanth, S and Waseda, Y (1988) Activities, Concentration Fluctuations and Complexing in Liquid Ca–Al Alloys. Transactions of the Japan Institute of Metals, 29 (1). pp. 50-59. Jacomet, P (1966) The recent developments of aluminium conductors in France in public distribution and industrial plants. NML Technical Journal, 8 (1). pp. 31-38. Jacomet, P (1966) The recent developments of aluminium conductors in France in public distribution and industrial plants. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Jacon, K T and Srikanth, S and Waseda, (1988) Vapour Composition and Activities in Mg-Zn Liquid Alloy at 923 K. Thermochimica Acta, 130 . pp. 193-203. Jain, Jitendra and Soni, S L and Sharma, Dilip (2010) Determination of wear rate of steel in high pressure and temperature zone for prediction of balance life of autofretagged tubes. Journal of Metallurgy and Materials Science, 52 (2). pp. 181-187. Jain, Pankaj K and Sahu, M N and Raju, C B (1999) Coating of alumina on ceno-spheres of fly-ash. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Jana, B and Saha, B and Shetty, Kishora and Yadav, J S and Gupta, B (2000) Airworthiness certification of titanium alloys for aeronautical applications. Journal of Metallurgy and materials Science, 42 (3). pp. 151-158. Jana, R K and Kumar, Vinay and Saha, A K and Rao, K V and Pandey, B D and Premchand, (1996) Processing of Tungsten Alloy Scrap for the Recovery of Tungsten Metal. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries, Feb, 1996, NML, Jamshedpur. Jana, R K and Pandey, B D and Kumar, Vinay and Bodas, M G and Akerkar, D D (1986) Seperation & Recovery of Cu and Zn by Solvent Extraction - Electrowinning from the Sulphate Leach Liquor of Complex Sulphide Ore. In: Proceedings of The National Symposium on Separation Techniques, Jan 1986, . Jana, R K and Pandey, B D and Kumar , Vinay and Saha, A K and Akerkar, D D (1987) Treatment of Ammoniacal Leach Liquor from Reduction Roast-Leach Route of Sea Nodules by Solvent Extraction. Transactions of the Indian Institute of Metals, 40 (6). pp. 479-488. Jana, R K and Pandey, B D and Premchand, (1999) Ammoniacal leaching of roast reduced deep-sea manganese nodules. Hydrometallurgy, 53 (1). pp. 45-56. Jana, R K and Srikanth, S and Pandey, B D and Kumar, Vinay and Premchand, (1999) Processing of Deep-Sea Manganese Nodules at NML for Recovery of Copper, Nickel & Cobalt. Metals Materials and Processes, 11 (2). pp. 133-144. Javoronkov, V A (1962) The Development of Rolling Mills in the USSR. NML Technical Journal, 4 (3). pp. 22-32. Jay Myers, O and Ovestrud, R M (1968) Modern Core Processes for the Non-ferrous Foundry. In: Symposium on Non-ferrous Metals Technology : Paper for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Jena, P K and Gupta, C K and Bose, D K and Taneja, A K (1969) The Present status and the projected programme on niobium-tantalum metallurgy in India. In: UNSPECIFIED. Jennings, R F and Frankau, A M (1959) Blast Furnace Burden Preparation with Reference to High Ash Coke. In: Symposium on Iron & Steel Industry in India organised by the NML, August, 1959, NML, Jamshedpur. Jennings, R F and Frankau, A M (1959) Blast Furnace Burden Preparation with Reference to High Ash Coke. NML Technical Journal, 1 (1). pp. 80-87. Jha, Amrita Kumari and Kumari, Archana and Choubey, P Ankaj Kumar and Kumar, Vinay and Jha, Manis K (2011) Waste lithium ion batteries - An alternative resource to recover lithium and cobalt. Journal of Metallurgy and Materials Science, 53 (3). pp. 225-231. Jha, Manis K and Choubey, Pankaj K and Kumari, Archana and Kumar, Rakesh and Kumar, Vinay and Lee, Jae-chun (2011) Leaching of lead from solder material used in electrical and electronic equipment. In: Proceedings of second symposium on Recycling of waste II, 2011, Recycling of waste II. Jha, Manis K and Kumar, Vinay (2005) Recovery of zinc from aqueous solutions by ion exchange process - A review. Journal of Metallurgy and Materials Science, 47 (3). pp. 119-128. Jha, Manis K and Upadhyay, A K and Bagchi, D and Kumar, Vinay (2005) Recovery of zinc from electroplating effluent using cationic resins. Journal of Metallurgy and Materials Science, 47 (4). pp. 177-187. Jha, N N and Singh, R K P and Jagannathan, K P and Jha, Ajit S. and Singh, R P and kumar, B A and Sahu, S R and Singh, S B and Bose, P K and Pande, A M and Biswas, S K and Gupta, K N (1987) DRI as a coolant in BOF at Bokaro Steel Ltd. NML Technical Journal, 29 (1-4). pp. 25-32. Jha, S N and Biswas, A C and Bhattacharya, H P (1977) Rapid indirect volumetric method for determination of silicon in ferro-silicon. NML Technical Journal, 19 (3-4). pp. 52-53. Jiles, D C and Lee, S J and Lo, C C H (2002) The Effects of Stress on Magnetic Properties and the use of Magnetic Measurements for Evaluation of Materials. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Joglekar, G D and Sen, Daneswar (1957) Characteristics of Metal-Graphite Brushes Made by the Powder Metallurgy Technique. In: UNSPECIFIED. Joseph, P L and Chakrabarti, H K and Banerjee, T (1968) Comparative performances of some indigenous manganese dioxides in experimental dry cells. NML Technical Journal, 10 (1). pp. 18-24. KKale, B B and Kulkarni, S S and Gokarn, A N (1998) Conversion of Natural Resources through Waste reduction at the Processing Step by Briquetting Technique. In: UNSPECIFIED. Kalinkin, A K (2011) Mechanosorption of Co2 by silicates: mechanism, kinetics and possible applications. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Kalinnikov, V T and Krasheninnikov, O N and Belogurova, T P (2011) Mining waste utilization in the production of building materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Kaloshkin, S D and Ergin, K S and Tcherdyntsev, V V and Maksimkin, A V and Petrzhik, M I and Antipov, E M and Gerasin, V A (2011) Structure and propertties of ball milled utrahigh-molecular weight Polyethylene - clay composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Kaloshkina, Sergey and Romankov, Sergey and Komarov, Sergey and Kaevitser, Ekaterina (2011) Intermetallic coatings produced by mechanical alloying method. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Kamiya, Kohji and Ohba, Akira and Gunji, Koki (1973) Desulphurization of Coke-Mixed Iron Ore Pellets. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Kanungo, Nityananda (1968) Inaugural address. NML Technical Journal, 10 (3). pp. 12-13. Kapoor, A N (1959) Some recent developments in protective coatings in U.K. NML Technical Journal, 1 (4). pp. 16-27. Kapoor, A N and Biswas, S K and Singh, Santokh R (1975) Possibility of conversion of Indian phosphoric basic pig iron to steel using basic side-blown converter. NML Technical Journal, 17 (1-2). pp. 1-9. Kapoor, A N and Chatterjea, A B and Nijhawan, B R (1957) A Comparative Study of Non-Ferrous Coatings on Steel. In: UNSPECIFIED. Kapoor, A N and Gupte, P K and Nijhawan, B R (1960) Hot Dip Aluminising of Steel Wire- Laboratory Scale Investigations and Pilot Plant Studies. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Kapoor, A N and Padan, J S (1974) Proper methods of testing for selection of iron ore for iron making. NML Technical Journal, 16 (1-2). pp. 5-9. Kapur, A N (1962) Scientific Research and Industrial Development and Role of National Research Development Corporation. NML Techinical Journal, 4 (2). pp. 12-14. Kar, Abhijit and Chaudhuri, S and Sen, Pratik K and Ray, Ajoy K (2007) Evaluation of hardness of the interfacial reaction products at the alumina–stainless steel brazed interface by modeling of nanoindentation results. Scripta Materialia, 57 (9). pp. 881-884. Kar, B C (1957) High Purity Electrolytic Manganese From Low-Grade Ore as a Substitute for Various Forms of Manganese Now being used in Metallurgical Industries. In: UNSPECIFIED. Kar, B C and Banerjee, T (1966) The application of electrolytic manganese as a substitute ferro alloy. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Karandikar, M V and Lele, P G and Khadilkar, S A (1999) Enhancement of reactivity and increased usage of low lime class -F-fly ash-possible avenues. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Karl, J (1969) Influence of forging-down and up-setting on the quality of heavy forgings. NML Technical Journal, 11 (3). pp. 16-17. Karuppiah, M T and Bhaskar Raju, G (2009) Anodic Degradation of CI Reactive Blue 221 Using Graphite and IrO2/TaO2/RuO2 Coated Titanium Electrodes. Industrial & Engineering Chemistry Research, 48 (4). pp. 2149-2156. Ketegenov, T and Urakaev, F (2011) Influence of thickness of coated layer on parameters and kinetics of mechanical activation (example of quartz processing). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Khairy, E M and Hussein, M K and EL - Barawy, K A (1969) Sulphatisation and Sulphidisation for hydro-metallurgical extraction of main constituents of a local ilmenite Ore. In: UNSPECIFIED. Khalid, M and Mehrotra, S P and Verma, C L (1999) Performance of fly ash based multicomponent blended cements. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Khanna, S S and Swarup, D (1961) The Role of Wet-Tensile Strength of Foundry Sands in the Surface Finish of Aluminium Sand Casting. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Khanra, A K and Godkhindi, M M and Pathak, L C (2005) Comparative studies on sintering behavior of self-propagating high-temperature synthesized ultra-fine titanium diboride powder. Journal of the American Ceramic Society, 88 (6). pp. 1619-1621. Khanra, A K and Godkhindi, M M and Pathak, L C (2007) Sintering behaviour of ultra-fine titanium diboride powder prepared by self-propagating high-temperature synthesis (SHS) technique. Materials Science and Engineering A, 454-455 . pp. 281-287. Khanra, G P and Kumar, S Giri and De, Gangadhar and Mittal, M C (2000) Development of tungsten-copper composite for bi-propellant control thrusters. Journal of Metallurgy and materials Science, 42 (3). pp. 139-149. Khare, R N (1957) The Copper Smelter at Ghatsila. In: UNSPECIFIED. Kheiry, E M and Hussein, M K and Barawy, K A (1968) Sulphatisation and Sulphidisation for Hydrometallurgical Extraction of Main Constituents of a Local Ilmenate ore. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Kieffer, Richard and Benesovsky, Friedrich (1958) Sintered Materials on the base of Iron with Special Regard to Alloyed Sintered Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Jeong, Jinki and Pandey, B D (2011) Leaching kinetics of copper from waste printed circuit boards by electro-generated chlorine in HCl solution. Hydrometallurgy, 107 (3-4). pp. 124-132. Kim, Hong-In and Park, Kyung-Ho and Mishra, D (2009) Influence of sulfuric acid baking on leaching of spent Ni–Mo/Al2O3 hydro-processing catalyst. Hydrometallurgy, 98 (1-2). pp. 192-195. Kim, Hong-In and Park, Kyung-Ho and Mishra, D (2009) Sulfuric acid baking and leaching of spent Co-Mo/Al2O3 catalyst. Journal of Hazardous Materials, 166 (2-3). pp. 1540-1544. Kim, Joon-Soo and Lee, Jin-Young and Kumar, Jyothi Rajesh and Yoon, Ho-Soon (2010) Leaching methodologies for uranium. Journal of Metallurgy and Materials Science, 52 (1). pp. 1-17. Kishore, Braj and Jha, Manis K (2011) Recovery of Nd from Nd-Fe-B magnet scrap of computer Hard Disk Drive. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted) Kisku, Nicky and Sau, D C (2011) Recovery of tungsten and copper from tungsten copper alloy. Training Report (TR). National Metallurgical Laboratory, Jamshedpur, Jamshedpur. (Submitted) Kjellgren, Bengt R F (1961) Status of the Beryllium Industry in the United States of America. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Kjellgren, Bengt R F (1961) Status of the Beryllium Industry in the United States of America. NML Technical Journal, 3 (1). pp. 37-45. Kodge, Anil Kumar and Kalyane, Sangshetty and Lagashetty, Arun Kumar (2011) Synthesis and characterization of polyvinyl alcoholcobalt oxide nanocomposite film. Journal of Metallurgy and Materials Science, 53 (4). pp. 387-392. Kokce, Ali and Dogan , Ali and Ceylan, Mehmet (1991) The Calculation of Martensite Habit Plane by using Elastic Strain Energy. NML Technical Journal, 33 (1-2). pp. 3-8. Konar, J and Banerjee, N G (1974) Vacuum heating hydrogen determination in aluminium and aluminium alloys. NML Technical Journal, 16 (1-2). pp. 18-19. Konar, J and Banerjee, N G and Chakravarti, H K and Banerjee, T (1968) Pickling of ferrous materials Part-I-with hydrochloric acid. NML Technical Journal, 10 (2). pp. 27-30. Konig, Horst (1973) Reduction of Iron Ores using Non-Coking Coal as the Reduction Agent. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Konstanchuk, I and Gerasimov, K and Bobet, J -L (2011) Mechanically alloyed magnesium-based materials For hydrogen storage. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Kosenko, N and Vinogradova, L and Filatova, N and Smirnova, M (2011) The mechanical treatment as a method of Inorganic substances passive. In: International Conference on Mechanochemistry and Mechanical Alloying, Dec 1-4, 2008, CSIR-NML, Jamshedpur. Koshiba, Eng. Sadao (1958) The Properties of High-speed Steel Derived from Magneic Iron Sand. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Krainer, H (1960) Pilot Plants for Metallurgical Research at Fried. Krupp, Essen. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Kranti, R and Kumar, Manoj and Ranganathan, S and Saxena, S B Lal and Mehrotra, S P (2009) Resistance Heating of Oxide Slags - Theoretical Model and Experimental Validation. The Canadian Metallurgical Quarterly, 48 (4). pp. 387-397. Krishanan, R M (1959) Foundry Industry in Great Britain and some general trends of development. NML Technical Journal, 1 (4). pp. 5-15. Krishnan, A A (1953) A Fundamental approach to the Study & Control of Failures due to Liquid or a Brittle Phase Enveloping Grains. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Krishnan, A A and Prakash, Ved (1957) Creep Resistance Non-Ferrous Alloys. In: UNSPECIFIED. Krishnan, R M and Khanna, M N and Chatterjea, A B and Nijhawan, B R (1957) Preparation of Aluminium-Silicon Alloys by Aluminothermic Reduction. In: UNSPECIFIED. Krishnan, R M and Nijhawan, B R (1953) Failures of Metals in Sulphur & Sulphur Bearing Media. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Krishnan, R M and Nijhawan, B R (1964) Scope and function of the regional foundry station of the National Metallurgical Laboratory at Batala. NML Technical Journal, 6 (2). pp. 25-31. Krishnan, R M and Nijhawan, B R and Lalkaka, R D (1963) Symposium on recent developments in Iron and Steel making with special reference to Indian conditions-A Review. NML Technical Journal, 5 (2). pp. 10-16. Krishnan, R M and Srivastava, K N and Banerjee, T (1959) The Development of Iron and Steel Industry in India's Five Year Plans. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Krishnan, T S (1969) Analytical quality Control in the Production of Nuclear grade Zirconium and its Alloys. In: UNSPECIFIED. Krishnan, T S (1968) Analytical Quality Control in the Production of Nuclear Grade Zirconium and its Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Krishnan, T S (1968) Analytical Quality Control in the Production of Nuclear Grade Zirconium and its Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2003) Electrodeposited Ni-B alloy films: Preparation and structural aspects. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 341-346. Kulikova, M P and Kaminskii, Yu D (2011) Influence of mechanical activation on alkylation and extractability of coal. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Kulkarni, A D and Deepa, V and Saha, Malini and Srinivasan, K (2004) Impact toughness of copper, zinc, tin, a-brass and phosphor bronze at different temperatures. Journal of Metallurgy and materials Science., 46 (3). pp. 175-182. Kulshrestha, S C and Jayaram, K M V and Dar, K K (1973) A study of the physiology of sulphur-oxidizing bacteria and its effect on uranium mobilization and leaching at Udaisagar, Udaipur District, Rajasthan. NML Technical Journal, 15 (4). pp. 42-46. Kumar, Abhishek and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Solvent extraction: a potential tool for the separation of metals from leach liquor of electronic scraps. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kumar, Dharmendra and Surana, V S (1966) Some aspects of redesigning in aluminium. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Kumar, G and Dey, U K and Mishra, S C and Sahay, V K (2000) Water recycling system in a coal beneficiation plant. Journal of Metallurgy and materials Science, 42 (4). pp. 243-248. Kumar, M. Ashok and Reddy, G Ramachandra and Reddy, G Harinatha and Reddy, K Hemachandra and Reddy, Y Venkata Mohana (2011) Fabrication and performance of hybrid betel nut (Areca catechu), short fiber (Sansevieria cylindrica : Agavaceae) epoxy composites. Journal of Metallurgy and Materials Science, 53 (4). pp. 375-386. Kumar, Manoj and Awasthi, R and Pramanick, A K and Singh, R N (2011) New ternary mixed oxides of Fe, Ni and Mo for enhanced oxygen evolution. International Journal of Hydrogen Energy, 36 (20). pp. 12698-12705. Kumar, Manoj and Pal, J and Ghosh, S (2004) Performance of sponge iron charging in electric arc furnace. Journal of Metallurgy and materials Science, 46 (3). pp. 197-204. Kumar, Manoj and Prasad, Sanjay and Ranganathan, S (2006) Kinetics of reduction of manganese ore under different flow rates of inert gas. Journal of Metallurgy and Materials Science, 48 (1). pp. 23-30. Kumar, Manoj and Ranganathan, S and Sinha, S N (2005) Reduction of manganese ores - A comparative study. Journal of Metallurgy and Materials Science, 47 (3). pp. 149-157. Kumar, Manoj and Yoo, Kyoungkeun and Kim, Min-seuk and Jeong, Jinki and Lee, Jae-chun (2011) Leaching of metals from waste printed circuit boards(PCBS) by sulphuric acid in the presence of hydrogen peroxide and nitric acid. The Banaras Metallurgist, 16 . pp. 141-148. Kumar, Niraj (1995) Modern PID controllers: An analysis to make them user friendly. NML Technical Journal, 37 (3). pp. 95-106. Kumar, P and Murthy, G V S (2000) Ultrasonic evaluation of double poured rolls. NDT & E International, 33 (1). pp. 43-45. Kumar, Pravesh (1995) Felicity ratio to assess strengths of GRP composites. NML Technical Journal, 37 (3). pp. 107-112. Kumar, Pravesh and Srivastava, V K (1995) Modified acousto ultrasonic technique for the measurement of mechanical properties of GRP laminates. NML Technical Journal, 37 (1). pp. 25-32. Kumar, R and Singh, K and Pandey, S (2012) Process forces and heat input as function of process parameters in AA5083 friction stir welds. Web of Science, 22 (2). pp. 288-298. Kumar, Raj and Kumar, Vinay (2011) Solvent Extraction of Cu/Li from the Leach Liquor of Spent Batteries of used Electronic devices. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted) Kumar, Rajendra (1975) NML-PM2 conductor-A versatile alloy aluminium conductor-why and for whom? NML Technical Journal, 17 (3-4). pp. 13-34. Kumar, Rajendra and Prakash, Ved (1966) Physical Metallurgy of Substitution. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Kumar, Rajendra and Singh, Manjit (1968) A centrifuging technique for studying structure of liquid metals. NML Technical Journal, 10 (2). pp. 24-26. Kumar, Rajendra and Singh, Manjit (1974) Electric grade aluminium alloy (NML-PM2). NML Technical Journal, 16 (3-4). pp. 35-40. Kumar, Rajendra and Singh, Manjit (1966) Electrical conductivity of some aluminium alloys. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Kumar, Rajendra and Singh, Manjit (1968) An Improved Aluminium Conductor. In: UNSPECIFIED. Kumar, Rajendra and Singh, Manjit (1968) An Improved Aluminium Conductor. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Kumar, Rajendra and Singh, Manjit (1961) Structure of Liquid Aluminium-Copper Alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Kumar, Rajendra and Sivaramakrishnan, C S (1972) Establishment of the Temperature Range of Accidental Overheating of Precipitation Hardened Aluminium-Copper Alloys. NML Technical Journal, 14 (1). pp. 16-23. Kumar, Rajendra and Sivaramakrishnan, C S (1971) Establishment of the temperature range of accidental overheating of precipitation hardened aluminium copper alloys. NML Technical Journal, 14 (1). pp. 16-23. Kumar, Rakesh and Alex, T C and Jha, Manis K and Khan, Z H and Mahapatra, S P and Mishra, C R (2004) Mechanochemistry and the bayer process of alumina production. In: Light Metals Symposium held at the 133rd TMS Annual Meeting, March, 2004, TMS Annual Meeting. Kumar, Rakesh and Alex, T C and Khan, Z H and Mahapatra, S P and Mehrotra, S P (2005) Mechanical activation of bauxite: potential and prospects in the bayer process. In: UNSPECIFIED. Kumar, Rakesh and Biswas, A K (1986) Zinc recovery from zawar ancient siliceous slag. Hydrometallurgy, 15 . pp. 267-280. Kumar, Rakesh and Kumar, Sanjay and Alex, T C and Srikanth, S and Mehrotra, S P (2010) Process innovations using mechanical activation of minerals and wastes. In: UNSPECIFIED. Kumar, Rakesh and Kumar, Sanjay and Badjena, S and Mehrotra, S P (2005) Hydration of mechanically activated granulated blast furnace slag. Metallurgical and Materials Transactions B, 36 (6). pp. 873-883. US2006000491916 (2008) Process for the production of Portland slag cement using granulated blast furnace slag. US7410537. Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2011) Mechanical activation in blended cement processing. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Kumar, Rakesh and Srivastava, J P and Premchand, (1998) Utilization of iron values of red mud for metallurgical applications. In: UNSPECIFIED. Kumar, S and Jain, A K (1999) Environmental evaluation of coal ash on soil behaviour - A case study of Chandrapura thermal power station. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Kumar, Sanjay and Das, S K and Das, U S and Daspoddar, P K (1995) Effect of synthetic aggregates on the high temperature strength properties of mixed calcium aluminates. NML Technical Journal, 37 (4). pp. 117-122. Kumar, Sanjay and Das, U S and Singh, K K (1999) Sintering studies on fly ash and clay mixes. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Kumar, Sanjay and Kumar, Rakesh and Alex, T C and Bandopadhyay, A and Mehrotra, S P (2007) Influence of reactivity of fly ash on geopolymerisation. Advances in Applied Ceramics, 106 (3). pp. 120-127. Kumar, Sanjay and Kumar, Rakesh and Mehrotra, S P (2011) Geopolymers, fly ash reactivity and mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Kumar, Sanjay and Singh, K K and Das, S K and Ramachandrarao, P (2002) Waste Utilisation : Towards Cleaner Environment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Kumar, Sushil and Prasad, Sanjay and Udayabhanu, G (2004) Studies on some aspects of extraction of nickel from laterite ore. Journal of Metallurgy and materials Science, 46 (1). pp. 39-49. Kumar, Vinay (1990) Filtration Studies of the Ammoniacal Leach Slurry of Polymetallic Sea Nodules. Indian Chemical Engineer, 32 (2). pp. 64-69. Kumar, Vinay and Agrawal, A and Pandey, B D and Premchand, (1998) Processing of spent tanning and chrome plating solutions for chromium recovery. In: Seminar on Environmental & waste management: in non-ferrous metallurgical industries, 1998, NML Jamshedpur, India. Kumar, Vinay and Bagchi, D and Pandey, B D (2006) Extraction of zinc-cobalt from sulphate solution of cobalt cake by D2EHPA in the processing of indian ocean nodules. Minerals Processing, 77 (5). pp. 299-304. Kumar, Vinay and Bagchi, D and Pandey, B D (2007) hydrometallurgical recovery of copper and nickel powders from the copper bleed solution of indian sea nodules. Korea on Minerals and Materials Processing and Utilization, 11 (1). pp. 56-63. Kumar, Vinay and Grover, Prem D (1991) Catalyst Evaluation for the Vapor-Phase Oxidation of p -Xylene. Industrial & Engineering Chemistry Research, 30 (6). pp. 1139-1141. Kumar, Vinay and Hosmani, Santosh S (2011) The effect of temperature and cooling-rate on packcarburized iron. Journal of Metallurgy and Materials Science, 53 (4). pp. 393-404. Kumar, Vinay and Jana, R K and Jha , D and Nayak, A K and Bagchi, D and Akerkar, D D (1987) Recovery of Copper, Nickel and Cobalt from Ammoniacal Leach Liquors Obtained by Direct Ammonia Leaching of Sea Nodules. Transactions of the Indian Institute of Metal, 40 (1). pp. 64-70. Kumar, Vinay and Jha, C N (1999) Fly ash for high value added applications. In: Proceedings of the National Seminar on Fly Ash Utilisations, February 26-27, 1999, NML Jamshedpur, India. Kumar, Vinay and Kumar, Manoj and Jha, Manis K and Jeong, Jinki and Lee, Jae-chun (2009) Solvent extraction of cadmium from sulfate solution with di-(2-ethylhexyl) phosphoric acid diluted in kerosene. Hydrometallurgy, 96 (3). pp. 230-234. Kumar, Vinay and Nayak, A K (1987) Chemistry of Vanadium Extraction from Titaniferrous Magnetite Ore. Chemical Engineering, 22 (5). pp. 93-95. Kumar, Vinay and Pandey, B D and Bagchi, D and Jana, R K and Agrawal, A and Premchand, (2000) Solvent extraction in the process of metal separation. Minerals & Metals Review, ( ). pp. 68-76. Kumar, Vinay and Pandey , B D and Bagchi, D (1991) Application of LIX 84 for Separation of Copper, Nickel and Cobalt in Ammoniacal Leaching of Ocean Nodules. Materials Transactions, Jim, 32 (2). pp. 157-163. Kumar , Rakesh and Bandopadhyay, Amitava (2002) Clean Technologies in Nonferrous Metals Recycling. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Kumar , Vinay and Pandey , B D and Akerkar, D D (1990) Electrowinning of Nickel in the Processing of Polymetallic Sea Nodules. Hydrometallurgy, 24 (2). pp. 189-201. Kumar et al, Rakesh (2011) UNSPECIFIED In: Frontiers in Mechanochemistry and Mechanical Alloying. CSIR-National Metallurgy Laboratory, Jamshedpur, pp. 1-334. ISBN 97881- 87053-69-8 Kumaran, S and Raghu, T and Subramanian, R and Ramakrishnan, S S (2000) Characterisation of mechanically alloyed atomised AI-Ni-Ce-Zr alloy system. Journal of Metallurgy and materials Science, 42 (3). pp. 159-165. Kumari, Archana and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Recovery of lead from the solder of waste printed circuit boards. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kundu, D K and Barman, R K (2002) Coke Oven Emission Standards - A Comparative Assessment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Kundu, Sukumar and Ghosh, M and Laik, A and Bhanumurthy, K and Kale, G B and Chatterjee, S (2005) Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. Materials Science and Engineering A, 407 (1-2). pp. 154-160. Kushwaha, Jyoti and Agrawal, A and Upadhyay, A K and Mankhand, T R and Sahu, K K (2011) Recovery of Molybdenum from Spent HDs Catalyst Leach Liquor by Solvent Extraction using Aliquat 336. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India. LLahiri, A and Das Gupta, N N and Basu, T N (1959) Some aspects of preparation of Coal for Coking (11). In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Lahiri, A K (1973) On the Direct Reduction of Iron Ore in Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Lahiri, A K (1994) Thermodynamics of Refining in Electric Furnace Steelmaking. In: UNSPECIFIED. Lahiri, A K and Aggarwal, Kajal (2002) Clean Technology : Limit and Limitation. In: Clean Technologies for Metallurgical Industries (EWM - 2002), 24-25 January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur. Lahiri, A K and Banerjee, N G and Banerjee, T (1963) Dissolution of steel and absorption of hydrogen by steel during acid picking in presence of inhibitor. NML Technical Journal, 5 (2). pp. 33-37. Lahiri, A K and Banerjee, T (1959) Cavitation Erosion-A case of conjoint action. NML Technical Journal, 1 (2). pp. 38-40. Lahiri, A K and Bhakta, U C (1971) Cracking of Brass Tubes in Sugar Juice Evaporators - A Case Study. NML Technical Journal, 13 (4). pp. 109-110. Lahiri, A K and Mukherjee, K P and Banerjee, T (1966) Studies on the properties of some copper-manganese alloys. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Lahiri, A K and Mukherjee, K P and Rao, Addanki S and Banerjee, T (1967) Studies on properties of rust formed during atmospheric corrosion. NML Technical Journal, 9 (4). pp. 24-30. Lal, Keemti and Malhotra, Sita Rani (1980) Spectrophotometric studies of chelates of iron (III) with 3-Bromo-2-hydroxy, Methylaceptophenon hydrozone (BHMAH). NML Technical Journal, 22 (3-4). pp. 41-42. Lal, Kishori and Kumar, Rajendra (1974) Degassing of Aluminium & Its Alloys. NML Technical Journal, 16 (4). pp. 49-56. Latiere, H J and Michaud, R (1961) On Slip Bands Obtained by Tension on Aluminium Specimens. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Lee, Jae-chun and Kim, Eun-young and Kim, Ji-Hye and Kim, Wonbaek and Kim, Byung-Soo and Pandey, B D (2011) Recycling of WC–Co hardmetal sludge by a new hydrometallurgical route. International Journal of Refractory Metals and Hard Materials, 29 (3). pp. 365-371. Liddiard, E A G and Sully, A H (1957) The Present Position & Future of the Manganese Industry with Special Reference to Indian Resources. In: UNSPECIFIED. Linol, Julie and Martinetto, Pauline and Anne, Michel and Coquerel, Gérard (2011) On the existence of a dynamic critical point by using wet milling on (±) modafinil. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Lloyd, H K and Oxlee, C H (1966) The influence of Aluminium and Iron additions on Copper-Manganese-Zinc Alloys. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Lloyd, H K and Oxlee, C H (1966) The influence of aluminium and iron additions on copper-manganese-zinc alloys. NML Technical Journal, 8 (1). pp. 39-44. MMacgregor, R A (1953) Failures of Steel Parts in Service. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Madhukar, A (2003) Technology Forecasting - An Important Tool for Marketing in R&D. In: UNSPECIFIED. Maekawa, Shizuya and Nakagawa, Yoshitaka (1959) Study on the Method of Taking a Sample for Determination of Oxygen in Molten Steel. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Mahanty, M S and Bhoray, S S and Sankaran, C and Srinivasan, S R and Bhatnagar, P P (1968) Extraction Characteristics of Alumina from Gujarat Bauxites. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Mahanty, M S and Bhoray, S S and Sankaran, C and Srinivasan, S R and Bhatnagar, P P (1968) Extraction Characteristics of Alumina from Gujrat Bauxites. In: UNSPECIFIED. Mahanty, M S and Misra, R N and Bhatnagar, P P (1968) Studies on the extraction of nickel from a low-grade nickel-ferrous ore from Rajasthan. NML Technical Journal, 10 (1). pp. 15-17. Mahapatra, A K S and Goswami, M C and Gupta, K N (1991) Evaluation of Physico Chemical Characteristics of some Indian Iron Ores and Sinters. NML Technical Journal, 33 (1-2). pp. 9-16. Mahapatra, A K S and Goswami, M C and Prakash, S and Singh, K K (1996) Quality of coke for high PCR blast furnace process-Some images. NML Technical Journal, 38 (4). pp. 161-167. Mahato, D K and Chaudhary, R K and Mohanta, M K and Srivastava, S C (2001) Phase characterisation of PZT type ceramics prepared by spray drying technique. Journal of Metallurgy and Materials Science, 43 (3). pp. 197-202. Mahato, M M and Sinha, S N (2002) Studies on the Influence of Different Grades Rolls on Microstructure Properties Correlation and Process Economics in Hot Rolling. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Maitra, Saikat (1999) Ceramic products from fly ash Global perspectives. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Maity, S K and Ballal, N B and Kawalla, R (2007) Development of process for thermo-mechanical treatment of ultrahigh strength steel prepared by electroslag refining. Ironmaking & Steelmaking, 34 (4). pp. 332-342. Maji, Bikas Chand and Ray, R K and Madangopal, Krishan (2001) Evolution of texture and microstructure during deformation and annealing of Fe3AI based alloy. Journal of Metallurgy and materials Science, 43 (2). pp. 103-111. Maji, K D (1982) Estimation of sulphur in synthetic slags for the studies of sulphur partition between pig iron and slags using radioactive tracer. NML Technical Journal, 24 (3-4). pp. 40-41. Maji, K D and Ramachandran, E G (1960) The direct evaluation of the effective camera radius in a Debye-Scherrer photograph. NML Technical Journal, 2 (4). pp. 22-23. Maji, K D and Ramachandran, E G (1961) Pole figures for randomly oriented sheets of silicon and aluminium. NML Technical Journal, 3 (2). pp. 28-35. Majumdar, J Dutta and Manna, I (2002) Laser Surface Engineering of Metallic Components. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Majumdar, S K and Lahiri, A K (1959) Mass Handling of Materials. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Majumdar, S K and Sarkar, G G and Chakravarti, A K and Lahiri, A (1960) Coal Washing Pilot Plants at Central Fuel Research Institute, Jealgora, India. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Majumdar, S K and Sarkar , G G and Chakravarti, A K and Lahiri, A (1960) Coal Washing Pilot Plants at Central Fuel Research Institute, Jealgora, India. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Majumdar, Shrabani and Mohanty, O N (2001) Non-oriented electrical steel: An overview. Journal of Metallurgy and materials Science, 43 (2). pp. 43-56. Majumder, B L (1953) New Materials of Construction for Heat Engines in High Temperature Service. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Malaviya, S K and Chatterjee, B and Singh, K K (1999) Fly ash - An emerging alternative building material. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Malcor, H (1959) Experience with Low Shaft Furnace at Ougree. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Malcor, H (1959) Experience with Low-Shaft Furnace at Ougree. NML Technical Journal, 1 (1). pp. 88-104. Malcor, H (1964) Recovery of unburnt gases from oxygen blown converters. NML Technical Journal, 6 (1). pp. 30-34. Malcor, H (1960) Usefulness of Pilot Stations and Plants. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Mallik, A K and Paul, K K and Kumar, A Seshu (2003) Engineering Associated with Research and Development. In: UNSPECIFIED. Manadal, Durbadal and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801. Mandal, G K and Batra, N K and Mehrotra, S P (2007) Sulphur control of blast furnace hot metal by manganese additions. Transaction of the Indian Institute of Metals, 60 (1). pp. 45-52. Mandal, S B (1978) Spectrophotometric determination of copper and minor constituents in low grade copper ores. NML Technical Journal, 20 (3-4). pp. 37-45. Mandal, S B (1978) Spectrophotometric determination of copper and minor constituents in low grade copper ores. NML Technical Journal, 20 (3-4). pp. 37-45. Manivel, P and Venkatachari, G (2004) The influence of H+ and Cl- ions on the effect of corrosion inhibition of iron by p-substituted anilines. Journal of Metallurgy and materials Science., 46 (3). pp. 165-173. Mannaswamy, T V and Paranjpe, V G and Visvanathan, S (1959) Dolomite as a flux for High-Alumina Blast Furnace Slags. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Manthapurwar, N S and Tamhane, S M and Hasan, M Z and Aggarwal, A L (1996) Air Pollution Problems from Cupola Furnaces in Iron Foundries. In: UNSPECIFIED. Maschlanka, W and Kehl, P and Knapp, H and Uhe, H (1973) The Production of Sponge Iron Utilizing the Midland-Ross Process at Hamburger Stahlwerke GMBH. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Maschlanka, W and Kehl, P and Knapp, H and Voss, H (1973) The Use of Sponge Iron in Electric Furnaces. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Mathad, G G and Altekar, V A (1961) Studies in the Amenability of Kolhapur Bauxite to Bayer's Process-Parts I and 11. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Mathur, A K (1999) Ash utilization in National Thermal Power Corporation. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Mathur, G P and Narayanan, P I A (1959) Beneficiation and Processing of some Important Raw Materials, for Iron and Steel Production. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Maulik, S C (1984) Sinter making-Russian practice. NML Technical Journal, 26 (3-4). pp. 44-51. Maulik, S C and Patnaik, H and Chakravorty, N (1988) Development of a non-linear regression model for iron ore sintering. NML Technical Journal, 30 (1-4). pp. 17-24. Mayer, G (1958) Some Recent Advances in the Study of Transformations in Alloy Steels. In: Symposium on Production, Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Mcdonald, G G (1953) Some Interesting Engineering Failures Encountered in Australia. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. McFarlane, J (1958) Silicon Steel Sheets - An outline of Properties Applications and Recent Developments. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. McMurrich, R P (1953) The use of Shot-Peening as a means of Reducing Fatigue Failures in Metal Components. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Meena, Harikesh and Hembram, Khelaram (2011) Study Of Metal Extraction and Forming. Training Report (TR). National Metallurgical Laboratory, Jamshedpur, Jamshedpur. Mehrotra, S P (1990) Mathematical Modelling of Contrinuous Casting of Steel Strips by Single Roll Process. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Mehrotra, S P (2007) Realm of Mechanochemistry in Extractive Metallurgy - Scientific Curiosity to Commercial Reality. Transactions of the Indian Institute of Metals, 60 (1). pp. 1-13. Mehta, K D and Das, Chitrangada and Pandey, B D (2010) Leaching of copper, nickel and cobalt from Indian Ocean manganese nodules by Aspergillus niger. Hydrometallurgy, 105 (1-2). pp. 89-95. Mehta, K D and Das, Chitrangada and Pandey, B D (2010) Reductive leaching of valuable metals from indian ocean nodules by bacillus circulans. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mehta, K D and Kumar, Rakesh and Pandey, B D and Mehrotra, S P (2011) Bio-dissolution of metals from activated nodules of Indian Ocean. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Mehta, K D and Pandey, B D and Mankhand, T R (2002) Bio-chemical recovery of valuable metals from Indian Ocean nodules in presence of pyrite and sulphur. Transactions of the Indian Institute of Metals, 55 (3). pp. 71-80. Mehta, K D and Pandey, B D and Mankhand, T R (2003) Studies on kinetics of biodissolution of metals from Indian Ocean nodules. Minerals Engineering, 16 (6). pp. 523-527. Mellere, C (1959) Pelletising of Hematite Ores. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Metya, A and Ghosh, M and Parida, N and Palit Sagar, S (2008) Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel. NDT & E International, 41 (6). pp. 484-489. Meyer, Dr. Ing. Gunther and Bongers, Dr. Ing. Uwe (1973) The Krupp Sponge Iron Process Production and Utilisation of Metallized Materials. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, National Metallurgical Laboratory (CSIR), Jamshedpur. Meyer, Kurt (1973) Present State of the Sl/Rn Process and Its Application to Indian Raw Materials. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Miller, J R (1958) The Mysore Iron and Steel Works as a Major Producer of Stainless Steel in India. In: Symposium on Production, Properties, and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Minhas, Gurbux Singh and Bhaskar Rao, H V (1965) Development of superduty silica with indigenous raw materials. NML Technical Journal, 7 (2). pp. 15-19. Minhas, Gurbux Singh and Bhaskar Rao, H V (1959) Evaluation of quartzites for the manufacture of silica bricks. NML Technical Journal, 1 (2). pp. 32-37. Minister, Chief (1973) Inaugural Address. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Mishra, D and Srivastava, R R and Sahu, K K and Singh, T B and Jana, R K (2011) Leaching of roast-reduced manganese nodules in NH3 – (NH4)2CO3 medium. Hydrometallurgy, 109 (3-4). pp. 215-220. Mishra, D and Srivastava, R R and Sahu, K K and Singh, T B and Jana, R K (2011) Leaching of roast-reduced manganese nodules in NH3–(NH4)2CO3 medium. Hydrometallurgy, 109 (3-4). pp. 215-220. Mishra, D K and Das, L N (1988) Design and development of ten channels multiplexer. NML Technical Journal, 30 (1-4). pp. 33-34. Mishra, Debabrata and Perumal, A and Srinivasan, A (2011) Composition dependent properties of mechanically alloyed amorphous Fe-Zr-B powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Mishra, Gangotri and Kumar, Rajendra (1967) Heat contents and heat capacities of lead-antimony-tin in ternary eutectic. NML Technical Journal, 9 (4). pp. 22-23. Mishra, Gangotri and Kumar, Rajendra (1967) Heat contents and heat capacities of liquid lead-antimony alloys. NML Technical Journal, 9 (4). pp. 18-21. Mishra, K K (1994) Alternate charge materials: problems and prospects of utilizing in electric arc and induction furnaces. In: UNSPECIFIED. Mishra, K K (1994) Alternative charge materials: prospects & availability. In: UNSPECIFIED. Mishra, K K (1997) Ferro Alloys in Industrial Perspective. In: UNSPECIFIED. Mishra, K K (1994) Kinetic aspects of melting in electric arc furnace. In: UNSPECIFIED. Mishra, K K (2003) Synergy of Technology Transfer. In: UNSPECIFIED. Mishra, P N and Goswami, N G and Mishra, S N (2003) Marketing in Libraries and Information Centres : A study on promotional efforts with reference to Jamshedpur City. In: UNSPECIFIED. Mishra, P N and Mishra, S N (2003) Prospects of digital information system and services in National Metallurgical Laboratory (CSIR), Jamshedpur. In: Prospects of digital information system and services in National Metallurgical Laboratory (CSIR), Jamshedpur. In: 48th Convention of Indian Library Association, 22-25 Jan 2003, Bangalore, India. Mishra, R N and Bhatnagar, P P (1963) Thermal beneficiation of low-grade chrome ore from Kankauli deposits, Ratnagiri district, Maharashtra. NML Technical Journal, 5 (4). pp. 29-32. Mishra, S C and Mishra, P C and Rout , K C and Anantapadmanabahn, P V (1999) Fly ash as a coating material for plasma spray coatings. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Mishra, S K (2002) Advanced Techniques for Surface Engineering of Industrial Materials. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Mishra, Sanak (2004) Some thoughts on Leadership and Knowledge. In: The excerpt of the lecture delivered by Dr. Sanak Mishra, 23/09/2003, Jamshedpur. Mishra, Suman K and Das, S and Pathak, L C (2004) Defect structures in zirconium diboride powder prepared by self-propagating high-temperature synthesis. Materials Science and Engineering A, 364 (1-2). pp. 249-255. Mishra, Suman K and Das, Swapan K and Ray, Ajoy K and Ramachandrarao, P (2002) Effect of Fe and Cr Addition on the Sintering Behavior of ZrB2 Produced by Self-Propagating High-Temperature Synthesis. Journal of the American Ceramic Society, 85 (11). pp. 2846-2848. Misra, R A P (1958) Furnaces and Equipment used in the Manufacture and Heat Treatment of Alloy Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Misra, R A P (1953) Investigation of Failures in Aeronautical Engineering. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Misra, R N and Bhatnagar, P P (1969) Nickel Resources in India and their Exploitation. In: UNSPECIFIED. Misra, R N and Bhatnagar, P P (1968) Nickel Resources in India and their Exploitation. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Misra, R N and Bhattacharya, H (1963) Tannin method for the estimation of vanadium and its separation from phosphorus. NML Technical Journal, 5 (3). pp. 28-31. Misra, R N and Sampath, V S and Bhatnagar, P P (1961) The Scope for Development of Magnesium Industry in India. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Misra, S S and Rama Char, T L (1969) Recent Developments in Corrosion resistant non-ferrous metals and Alloys. In: UNSPECIFIED. Misra, S S and Rama Char, T L (1968) Recent Developments in Corrosion Resistant Non-ferrous Metals and Alloys. In: Symposium on Non-ferrous Metals Technology : Paper for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Misra, V N (2002) Development of Waste Management Culture. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Mitra, A and Panda, A K and Pal, S K (2002) Magnetic Characterisation of Amorphous and Nanocrystalline Materials. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM - 2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Mitra, A and Panda, A K and Rao, Venkatesh and Singh, S R and Ramachandrarao, P (2001) Preparation and characterization of Fe-Nb-Cu-Si-B-based nanocrystalline soft magnetic materials. Applied Surface Science, 182 (3-4). pp. 321-325. Mitra, A and Rao, Venkatesh (1996) Magnetics in automobiles. NML Technical Journal, 38 (3). pp. 81-94. Mitra, M S and Contractor, G P (1953) Mechanical Properties-A Scientific approach. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Mohanty, J K and Rao, D S and Rao, R Bhima (2000) Mineralogy and pre-concentration of the chromite overburden of the Sukinda Ultramafic Belt, Orissa, India. CIM Bulletin, 93 (1038). pp. 37-43. Mohanty, O N (2003) Challenge in R&D Management : Tata Steel A Case Study. In: UNSPECIFIED. Mohanty, O N (2002) Iron and Steel through the Ages and the Current Scenario. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Mohapatra, J N and Panda, A K and Gunjan, M K and Bandopadhyay, N R and Mitra, A and Ghosh, R N (2007) Ageing behavior study of 5Cr–0.5Mo steel by magnetic Barkhausen emissions and magnetic hysteresis loop techniques. NDT & E International, 40 (2). pp. 173-178. Molnar, L P (1970) Utilisation of iron ore fines & coal dusts for direct steel production in India-Scope for mini-steel plants. NML Technical Journal, 12 (4). pp. 93-96. Mondal, B N and Basumallick, A and Chattopadhyay, P P (2011) The magnetic behavior of Cu-Ni-Co-Fe quaternary alloys prepared by Mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Mondal, Sudipta and Saha, M B and Ray, Ajoy K (2001) Processing and characterisation of Ag-Cu- Ti brazing alloys. Journal of Metallurgy and materials Science, 43 (1). pp. 17-23. Moorthy, K Balarama (1969) Current trends in the use of Zirconium Alloys. In: UNSPECIFIED. Morgan, S W K (1969) The Impact of the Imperial Smelting Furnace on Non-ferrous Metallurgy. In: UNSPECIFIED. Morgan, S W K (1968) The Place of the Imperial Smelting Process in Non-ferrous Metallurgy. In: Symposium on on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Mukherjee, A N (1995) Development of aluminium anodes for cathodic protection. NML Technical Journal, 37 (1). pp. 13-24. Mukherjee, A N and Rao, Addanki S and Banerjee, T (1966) Chromate passivation of aluminium and copper. NML Technical Journal, 8 (4). pp. 22-27. Mukherjee, J K (1966) Thermomechanical ausforming technique for producing substitute ultra high strength steels. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Mukherjee, J K and Chatterjee, G P (1957) Some Studies on Recovery & Oxidation Characteristics of Copper by Thermoelectric Phenomenon. In: UNSPECIFIED. Mukherjee, J K and Lahiri, A K and Banerjee, T (1968) Studies on the structural properties of rust from ancient iron. NML Technical Journal, 10 (1). pp. 25-29. Mukherjee, J K and Nijhawan, B R (1966) Some precipitation reactions in chromium-manganese- nitrogen stainless steels on aging and cold-working. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Mukherjee, K and Prakash, S (2011) Cold Simulation of momentum transfer of a metal droplet falling through slag systems possessing net-work structured fluids. Chemical Engineering Science, 66 (6). pp. 1027-1037. Mukherjee, K and Prakash, S (2009) Studies on RTD of Metalloids in the Blast Furnace. Journal Of Iron And Steel Research International, 16 (Part.2 Suppl.2). pp. 1101-1107. Mukherjee, K and Prakash, S and Sinha, S N and Mehrotra, S P (2007) Cold simulation of metalloids transport in blast furnaces. Steel Research International, 78 (4). pp. 281-289. Mukherjee, K P and Khan, D K (1970) Some observations on manganese steel bimetallic couples from the point of view of cathodic protection. NML Technical Journal, 12 (3). pp. 78-82. Mukherjee, K P and Lahiri, A K (1964) Development of aqueous non-sludge forming zinc phosphate bath. NML Technical Journal, 6 (4). pp. 23-27. Mukherjee, K P and Lahiri, A K and Banerjee, T (1960) Brown spots on Aluminium circles developed during storage. NML Technical Journal, 2 (2). pp. 23-26. Mukherjee, K P and Lahiri, A K and Banerjee, T (1962) Corrosion of mild steel in saturated brine solution. NML Technical Journal, 4 (3). pp. 8-12. Mukherjee, K P and Lahiri, A K and Banerjee, T (1958) Effect of Low Alloy Additions on Corrosion of Steel in Different Atmospheres. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Mukherjee, K P and Lahiri, A K and Banerjee, T (1960) Erosion of induced draft fan in thermal power station. NML Technical Journal, 2 (3). pp. 7-11. Mukherjee, M K and Gourishanker, S and Nair, M Janardanan (1968) Influence of thermal cycling on weldments of non-ferrous materials : I - Aluminium Alloy 6061. In: UNSPECIFIED. Mukherjee, M K and Gourishanker, S and Nair, M Janardanan (1968) Influence of Thermal Cycling on Weldments of Non-Ferrous Metal I. Aluminium Alloy 6061. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Mukherjee, S P (2003) Measurement of Customer Satisfaction. In: UNSPECIFIED. Mukherjee, T K and Patra, R N (1998) Status of Waste Treatment in Titanium Mineral Industries. In: UNSPECIFIED. Mukhopadhyay, N K (2011) Synthesis of nanocrystalline and amorphous phases in complex metallic alloys during mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Mulas, G and Delogu, F (2011) Estimation of mechanochemical effects in heterogeneous processes. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Muliyil, J A (1961) Recent Developments in the Welding of Light Metals & alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Muliyil, J A (1957) Welding of Non-Ferrous Metals by the Argon Arc & Argonaut Processes. In: UNSPECIFIED. Muller, Paul H and Oehler, Roland E (1961) Latest Developments in Aluminium Reduction. NML Technical Journal, 3 (1). pp. 29-36. Muller, Paul H and Oehler, Roland E (1961) Latest Developments in Aluminium Reduction. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Mullick, U P (1966) Critical raw materials and substitutes in the light of India's self-sufficiency. In: Symposium on micro-metallurgy - The role of minute additions to ferrous and non-ferrous metals and alloys, March 29-April 1, 1965, Jamshedpur. Mullick, U P (1969) Refining of blister copper. In: UNSPECIFIED. Mullick, U P (1968) Refining of Blister Copper. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Murthy, B S and Maiti, R and Chakraborty, M (2001) Development of in-situ AI-TiB2 metal matrix composites. Journal of Metallurgy and materials Science, 43 (2). pp. 93-101. US2002000112053 (2003) Process for the recovery of gold and silver from used refractory bricks. US6602319. Murthy, G V S and Ghosh, Sabita and Das, Mousumi and Das, Goutam and Ghosh, R N (2008) Correlation between ultrasonic velocity and indentation-based mechanical properties with microstructure in Nimonic 263. Materials Science and Engineering A, 488 (1-2). pp. 398-405. Murthy, H P S (1968) Some material and process considerations in the manufacture of high alumina blast furnace refractories. NML Technical Journal, 10 (1). pp. 30-34. Murthy, H P S and Gangadharan, T K (1966) A comparative study of the A.S.T.M thermal conductivity and the Blakeley-Cobb apparatus as instruments for routine measurements of thermal conductivity of refractories. NML Technical Journal, 8 (2). pp. 15-19. Murthy, H P S and Gangadharan, T K (1967) Properties of some Indian Fire Bricks. NML Technical Journal, 9 (3). pp. 20-23. Murthy, H P S and Singh, Gurbux (1967) Properties of Indian pouring pit refractories: Pt-1 nozzles. NML Technical Journal, 9 (3). pp. 24-29. Murthy, H P S and Singh, Minhas Gurbux (1967) Properties of Indian pouring pit refractories: Part II-stoppers. NML Technical Journal, 9 (4). pp. 12-14. Murty, D S R and Narasimha Rao, D L (1999) Fly ash and its use in cementitious material in civil engineering. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Murugananthan, M and Latha, S S (2010) Anodic oxidation of ketoprofen- an anti inflammatory drug using boron doped diamond and platinum electrodes. Journal of Hazardous Materials, 180 (1-3). pp. 753-758. Muthuraman, B (2004) Development in Steel Research. In: The excerpts of the Lecture delivered by Shri B. Muthuraman, 26/09/2002, Jamshedpur. Myers Jay, O and Ovestrud, R M (1968) Modern core processes for the non-ferrous foundry. In: UNSPECIFIED. NNag, P S and Mukherjee, K P (1979) Corrosion of steam header in the boiler plant-A case study. NML Technical Journal, 21 (3-4). pp. 25-29. Naik, A N (1973) Future of Sponge Iron in India and Plant Design Data. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Narang, S K (1989) Value engineering in plating and metal finishing: actual practices and possibilities. Transactions of the SAEST, 24 (1). Narang, S K (1995) Zinc plating - recent developments and practical considerations. NML Technical Journal, 37 (2). pp. 61-67. Narasaiah, N and Chakraborti, P C and Maiti, R and Ray, K K (2005) Fatigue Crack Initiation in an Interstitial Free Steel. ISIJ International, 45 (1). pp. 127-132. Narasaiah, N and Ray, K K (2008) Initiation and growth of micro-cracks under cyclic loading. Materials Science and Engineering A, 474 (1-2). pp. 48-59. Narasaiah, N and Ray, K K (2005) Small crack formation in a low carbon steel with banded ferrite–pearlite structure. Materials Science and Engineering A, 392 (1-2). pp. 269-277. Narasaiah, N and Sivaprasad, S and Chattopadhyay, J and Kushwaha, H S and Roos, E and Tarafder, S (2010) Effect of constraint on fracture parameters of piping materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 541-545. Narasimhan, B R V and Prabhakar, S and Rao, K H and Manohar, P and Gnanam, F D (2002) Utilization of ferrous leach liquor to synthesize gamma ferric oxide. Scandinavian Journal Of Metallurgy, 31 (3). pp. 201-205. Narasimhan, B R V and Satendra, Kumar and Sankara Narayanan, T S N (2011) Synthesis of manganese zinc ferrite using ferrous pickle liquor and pyrolusite ore. Environmental Chemistry Letters, 9 (2). pp. 243-250. Narayanan, P I A (1957) Recent Researches on the dressing of Low-Grade Manganese Ores in India. In: UNSPECIFIED. Narayanan, P I A (1968) Vote of Thanks. NML Technical Journal, 10 (3). pp. 14-15. Narayanan, P I A (1969) Vote of thanks. In: UNSPECIFIED. Narayanswamy, C V and Nijhawan, B R (1950) Effect of Manganese on Steel: Literature Report No. 3. Journal of Scientific and Industrial Research, 9A . pp. 52-55. Nath, R and Mathur, A S and Mishra, R (1994) Integration of Mini Blast Furnace with Existing Electric Arc Furnace for Modernisation & Expansion of Usha Martin Mini Steel Complex at Jamshedpur. In: UNSPECIFIED. Nath, S K (2011) Effect of Mechanical Activation on Synthesis and Properties of Cordierite (2MgO.2Al2O3.5SiO2). Exploratory (OLP). National Metallurgical Laboratory, Jamshedpur. (Submitted) Nayak, A K (1981) Thermodynamic analysis of Al-Zn alloys from calorimetric measurements. NML Technical Journal, 23 (1-2). pp. 3-10. Neterwala, D M (1997) Export of Ferro Alloys in the Changed conditions of Liberalised Economy. In: UNSPECIFIED. Nguyen, N V and Jeong, Jinki and Jha, Manis K and Lee, Jae-chun and Osseo-Asare, Kwadwo (2010) Comparative studies on the adsorption of Au(III) from waste rinse water of semiconductor industry using various resins. Hydrometallurgy, 105 (1-2). pp. 161-167. Nguyen, N V and Jeong, Jinki and Shin, Doyun and Kim, Byung-Su and Lee, Jae-chun and Pandey, B D (2012) Simultaneous Recovery of Gold and Iodine from the Waste Rinse Water of the Semiconductor Industry Using Activated Carbon. Materials Transactions, 53 (4). pp. 760-765. Nguyen, N V and Lee, Jae-chun and Kim, Soo-kyoung and Jha, Manis K and Chung, Kang-Sup and Jeong, Jinki (2010) Adsorption of gold(III) from waste rinse water of semiconductor manufacturing industries using Amberlite XAD-7HP resin. Gold Bulletin, 43 (3). pp. 200-208. Nguyen, Quang Chinh and Illy, Judit and Ca, To Duy (1998) Precipitation and GP-zone structures in AlZnMg (Cu, Zn) alloys. NML Technical Journal, 40 (2). pp. 45-49. Nijhawan, B R (1959) Abstracts of Papers Presented at the Symposium on Iron and Steel Industry in India to be held at Jamshedpur. NML Technical Journal, 1 (2). pp. 1-28. Nijhawan, B R (1953) Effects of Austenitic Grain Size & Other Factors on the Brittle Failure of Mild Steel. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Nijhawan, B R (1958) Indian Alloy Steels for Engineering Industries. In: Symposium on Production Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R (1957) Indian Manganese Ore Industry & Scope for its Development. In: UNSPECIFIED. Nijhawan, B R (1959) Iron and Steel Industry in India. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Nijhawan, B R (1958) Micro-Metallurgy of Alloy Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R (1989) The present state and prospects of the world iron and steel industry. NML Technical Journal, 31 (1-4). pp. 3-11. Nijhawan, B R (1959) Recent Trends in Iron and Steel Technology. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Nijhawan, B R (1964) Research and development work on the utilisation of metallurgical wastes at the National Metallurgical Laboratory. NML Technical Journal, 6 (1). pp. 50-59. Nijhawan, B R (1959) The Role of National Metallurgical Laboratory in Ferrous Metallurgical Research and Development in India. In: Symposium on Iron & Steel Industry in India Organised by the National Metallurgical Laboratory, August, 1959, NML, Jamshedpur. Nijhawan, B R (1959) The role of National Metallurgical Laboratory in ferrous metallurgical Research and Development in India. NML Technical Journal, 1 (1). pp. 29-40. Nijhawan, B R (1962) The role of National Metallurgical Laboratory in the research and development of ferro alloy industry in India. NML Technical Journal, 4 (1). pp. 41-50. Nijhawan, B R (1961) The Role of the National Metallurgical Laboratory in Research & Development of Light Metal Industry in India. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Nijhawan, B R (1961) The role of the National Metallurgical Laboratory in Research and Development of Light Metal Industry in India. NML Technical Journal, 3 (1). pp. 56-72. Nijhawan, B R (1960) Scope of pilot plant research and development at the National Metallurgical Laboratory. NML Technical Journal, 2 (1). pp. 11-23. Nijhawan, B R (1966) Scope of research and development work on substitute alloys at the National Metallurgical Laboratory. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Nijhawan, B R (1966) Scope of research and development work on substitute alloys at the National Metallurgical Laboratory. NML Technical Journal, 8 (1). pp. 56-79. Nijhawan, B R (1965) Scope of research in micro-metallurgy at the National Metallurgical Laboratory. NML Technical Journal, 7 (1). pp. 54-64. Nijhawan, B R (1953) Service Failures of Engineering Metal Components. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Nijhawan, B R (1960) Some aspects of Pilot Plant Research and Development in Iron and Steel Industry. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Nijhawan, B R (1962) Some raw materials' problems for iron-making in India. NML Technical Journal, 4 (2). pp. 34-38. Nijhawan, B R (1958) Tailor-Made Alloy Constructional Steels. In: Symposium on Production, Properties & Applictions of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R (1958) Temper-brittleness: Part I - Unalloyed Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R and Bucknall, E H (1958) Alloy Steel Industry in India - Historical. In: Symposium on Production, Properties & Applications of Alloy & Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R and Bucknall, E H (1954) A survey of Non-Ferrous Minerals & Industry in India. In: UNSPECIFIED. Nijhawan, B R and Chatterjea, A B (1958) Substitution of Alloying Elements by Grain Size Control of Alloy Steels. In: Symposium on Production, Properties, and Applications of Alloy and special Steel, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R and Chatterjea, A B (1958) Temper-Brittleness: Part II- Alloy Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R and Gupte, P K (1958) Manufacture in India of Ferro Alloys used in Alloy Steel Industry. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. 61978, 61980 (1958) Nickel-free chromium-manganese-nitrogen stainless steel. 61978, 61980. Nijhawan, B R and Gupte, P K and Bhatnagar, S S and Guha, B K and Dhanjal, S S (1966) Research and Development work on Substitute Nickel-Free Austenitic Stainless Steels. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Nijhawan, B R and Gupte, P K and Bhatnagar, S S and Guha, B K and Dhanjal, S S (1967) Substitute Nickel-free Austenitic Stainless Steel. The Journal of the Iron and Steel Institute . pp. 292-304. Nijhawan, B R and Ranganathan, S (1957) Powder Metallurgy & its Application to Non-Ferrous Metals. In: UNSPECIFIED. Nijhawan, B R and Sharma, C (1966) Substitution of non-indigenous non-ferrous metals and alloys. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Nockels , W J B (1968) The Role of Aluminium and Aluminium Alloys in Engineering Industries. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Nockles, W J B (1968) The role of Aluminium and Aluminium alloys in Engineering Industries. In: UNSPECIFIED. OO'Neill, Hugh (1958) The Application of Alloy and Special Steels in Railway Work. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Offner, Walter W (1958) Fabrication and Inspection of Alloy Steel Piping. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Onodera, S and Arakida, Y (1959) Effect of Gravity on the Macro-Segregation of Larger Steel Ingots. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Onodera, S and Tokuda, A (1959) Transformation Characteristics of Large Steel Forgings. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Ostler, F (1961) Modern Melting & Holding Furnaces for Light Metals. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. PPabi, S K (1976) Resistometric study of zone in Al-Cu-Mg alloys. NML Technical Journal, 18 (1). pp. 10-13. Padan, J S and Singh, Onkar and Gupta, K N (1978) Decrepitation behaviour of Lohara iron ore from Maharashtra. NML Technical Journal, 20 (3-4). pp. 35-36. Padan, J S and Singh, Onkar and Gupta, K N (1978) Decrepitation behaviour of Lohara iron ore from Maharashtra. NML Technical Journal, 20 (3-4). pp. 35-36. Padan, J S and Singh, Onkar and Kapoor, A N (1973) Raw materials for iron making and their testing. NML Technical Journal, 15 (3). pp. 59-68. Padhi, K K (2000) Evaluation and improvement of X-ray emission analysis for the recovery values of baryte waste. Journal of Metallurgy and materials Science, 42 (4). pp. 255-267. Padhi, K K (1998) Observation of x-ray interferences on apatite secondary phosphate minerals in Sukulu phosphatic soil, Uganda. NML Technical Journal, 40 (2). pp. 63-68. Padhi, K K (1998) X-ray fluorescence analysis of iron ore using de-jongh's algorithm. NML Technical Journal, 40 (4). pp. 115-122. Padhi, K K and Biswas, A C and Pandey, L P (1978) Estimation of metallic ferrous and ferric iron. NML Technical Journal, 20 (1-2). pp. 15-19. Padhi, K K and Biswas, A C and Pandey, L P (1978) Estimation of metallic ferrous and ferric iron. NML Technical Journal, 20 (1-2). pp. 15-19. Padhi, K K and Pandey, L P (1994) The effect of oxalate concentration and pH of the solution on complete precipitability of tantalum-tannin complex and its determination by molecular absorption spectrophotometry. NML Technical Journal, 36 (3). pp. 111-115. Padhi, K K and Pandey, L P (1993) Solvent extraction and spectrophotometric determination of niobium in steel with snazox and hydrogen peroxide. NML Technical Journal, 35 (1-2). pp. 24-28. Padmanabhan, K A and Prabu, S Balasivanandha (2011) Ultrafine grained materials through mechanical processing: An assessment. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Pal, A T (1957) Removal of Aluminium from Copper-based Alloys to Ensure Pressure-Tight Castings. In: UNSPECIFIED. Pal, A T (1957) Valves of High-Nickel Alloys. In: UNSPECIFIED. Pal, J and Bandopadhyay, D and Singh, D P and Ghosh, Sukomal (2008) A comparative study for smelting of chromite ore, pellets, briquettes and sinter. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 117 (3). pp. 129-136. Pal, J and Chaudhary, P N and Goswami, M C (2003) Utilisation of LD slag - An overview. Journal of Metallurgy and Materials Science, 45 (2). pp. 61-72. Pal, J and Ghorai, S and Goswami, M C and Bandyopadhyay, D and Ghosh, S (2011) Agglomeration of Waste Iron-oxide for use in Steel Making. Steel Tech, 6 (1). pp. 1-6. Pal, J and Ghorai, S and Singh, D P and Goswami, M C and Bandopadhyay, D and Ghosh, Dinabandhu (2011) Dissolution Characteristics of CO2-Treated Fluxed Pellets in Hot Metal Bath. Mineral Processing and Extractive Metallurgy Review , 32 (4). pp. 229-246. Pal, J and Ghosh, S and Goswami, M C and Singh, D P and Kumar, Manoj and Minj, R K and Upadhyay, A K (2007) Role of direct reduced iron fines in nitrogen removal from electric arc furnace steel. Steel Research International, 78 (8). pp. 588-594. Pal, J and Goswami, M C (2004) Control of silicon in hot metal. Journal of Metallurgy and materials Science, 46 (1). pp. 23-38. Pal, J and Goswami, M C and Goel, R P (2005) Some Thermodynamic and Kinetic Aspects of Nitrogen Removal in Arc Furnace Steel Melting. Indian Foundry Journal, 51 (6). pp. 33-40. Pal, J and Goswami, M C and Singh, Manjit and Singh, K K (2003) Desulphurisation of high sulphur coal to improve industrial utilisation. Ironmaking & Steelmaking, 30 (6). pp. 441-446. Pal, Sital K and Prakash, S (2003) Management of Intellectual Property Rights in R&D Organisations. In: UNSPECIFIED. Palaniandy, Samayamutthirian and Azizli, Khairun Azizi Mohd and Hussin, Hashim and Hashim, Syed Fuad Saiyid (2011) Changes in the structure of talc by continuous jet milling in relation to imposed specific kinetic energy. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Palazzi, Aurelio and Colombo, Attilio (1959) Making and Properties of Mixed Magnetite-Hematite Pellets. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Palit, S K and Chatterjea, A B (1974) Effect of aluminium and boron on the kinetics and morphology of graphite precipitation during malleablization. NML Technical Journal, 16 (1-2). pp. 10-17. Palit Sagar, S and Ravi Kumar, B and Ghosh Chowdhury, S and De, P K and Ghosh, R N (2008) Determination of crystallographic texture in cold-rolled copper and stainless steel by spectrum analysis of ultrasonic signal. Scripta Materialia, 58 (7). pp. 595-598. Panda, A K and Kumari, S and Chattoraj, I and Svec, P and Mitra, A (2005) Effect of Fe addition on the crystallization behaviour and Curie temperature of CoCrSiB-based amorphous alloys. Philosophical Magazine, 85 (7). pp. 1835-1845. Panda, Bijayalaxmi and Das, S C and Panda, R K (2010) Oxidation of sulfurous acid on a graphite anode in the presence and absence of cobalt ion during electrodeposition of copper from a acidic sulfate bath. Journal of Metallurgy and Materials Science, 52 (3). pp. 231-237. Panda, S and Panda, S K and Nayak, B D and Rao, D S and Pradhan, N and Sukla, L B and Mishra, B K (2010) Effect of thermal activation on recovery of copper using microorganisms from ball mill spillage. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Panda, S C and Kar, R N and Patra, P and Das, B (1996) Environmental and Waste Management in Some Mining Operations in Orissa. In: UNSPECIFIED. Panda, S C and Ray, H S (1996) Waste Management in Some Medium Sized Metallurgical Industries. In: UNSPECIFIED. Pande, A M and Gupta, K N (1988) Carbothermic reduction of manganese ore by low temperature carbonised coke. NML Technical Journal, 30 (1-4). pp. 25-32. Pande, A M and Sengupta, P L and Dhananjayan, N and Chakrabarti, H K (1970) Thermal reduction of manganese ores with solid fuels: Part I-charcoal. NML Technical Journal, 12 (3). pp. 65-68. Pandey, B D (2011) Rare Metals Extraction from Non-ferrous Resources in India: Present Status and Prospects of R&D. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India. Pandey, B D and Bagchi, D and Kumar, Vinay (1994) Co-Extraction - Selective Stripping for the Recovery of Nickel and Copper from the Leach Liquor of Ocean Nodules. The Canadian Journal of Chemical Engineering, 72 (4). pp. 631-636. Pandey, B D and Bagchi, D and Kumar, Vinay (1993) Co-Extraction-Selective stripping for the Recovery of Nickel & Copper from the Leach Liquor of ocean Nodules. In: Proceedings of ISEC' 1993, Sept. Pandey, B D and Bagchi, D and Kumar, Vinay and Agrawal, A and Premchand, (2002) Pressure sulpuric acid leaching of a sulphide concentrate to recover copper, nickel and cobalt. Transactions of the Institution of Mining and Metallurgy Section C-Mineral Processing and Extractive Metallurgy, 111 . C106-C109. Pandey, B D and Cote, G and Bauer, D (1996) Extraction of chromium (III) from spent tanning baths. Hydrometallurgy, 40 (3). pp. 343-357. Pandey, B D and Jana, R K and Bodas, M G and Kumar, Vinay and Akerkar, D D (1988) Extraction of Copper and Zinc from Complex Sulphide by Solvent Extraction -Electrowinning Route. Journal of Electrochemical Society, 37 (3). pp. 247-251. Pandey, B D and Jana, R K and Kumar, Vinay and Bodas , M G and Akerkar , D D (1988) Treatment of Polymetallic Sea Nodules by Ammoniacal Reduction Leaching. Transactions of the Indian Institute of Metals, 41 (4). pp. 319-328. Pandey, B D and Kumar, Vinay and Akerkar, D D (1988) Extraction of Copper From Ammoniacal Solution By LIX-84. Transactions of the Indian Institute of Metals, 41 (3). pp. 265-267. Pandey, B D and Kumar, Vinay and Bagchi, D and Akerkar, D D (1989) Extraction of Nickel and Copper from the Ammoniacal Leach Solution of Sea Nodules by LIX 64N. Ind. Eng.Chem. Res., 28 (11). pp. 1664-1669. Pandey, J L and Narang, S K and Agrawal, A (1996) Processing of defective nickel-plated parts with non-cyanide chemical strippers. NML Technical Journal, 38 (1). pp. 31-35. Pandey, L P (1977) Spectrophotometric determination of vanadium by diphenylcarbazide. NML Technical Journal, 19 (3-4). pp. 45-46. Pandey, L P (1973) Spectrophotometric studies on the reduction of vanadium and molybdenum by glucose and fructose. NML Technical Journal, 15 (1). pp. 24-27. Pandey, L P and Dasgupta, P and Ghose, A (1976) Spectrophotometric determination of cobalt by thioglycollic acid. NML Technical Journal, 18 (3). pp. 39-41. Pandey, L P and Gupta, K K and Jha, S N and Dasgupta, P and Chatterjee, N N (1985) Analytical studies of sea bed polymetallic nodules by atomic absorption spectrophotometry. NML Technical Journal, 27 (1-2). pp. 14-16. Pandey, O N and Sarkar, A K and Sharma, V N (1996) Growth of Certain Tree Species in Fly Ash Amended Soil. In: UNSPECIFIED. Pandey , H D and Bhattacharya, S and Maheshwari, G D and Prakash, OM and Mediratta, S R (1996) Research needs in environmental and waste management in iron & steel industries. In: UNSPECIFIED. Pandit, Ashwin S and Das, Siddhartha (2002) Plasma Sprayed Ceramic Coatings on Metallic Substrates. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Pantke, ING. H.D (1973) Purofer, Industrial Application of Direct Reduction. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Paranjpe, V G and Visvanathan, S (1958) Low-Alloy High-Strength Steels. In: Symposium on Production, Properties & Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Parashar, S K S and Basu, D K and Banerjee, M K (2001) Measurement of diffusion layer of temporary surface coatings. Journal of Metallurgy and materials Science, 43 (4). pp. 247-252. Parbat, R N (1998) Environmental and Waste management in Non-ferrous Metallurgical Industries - Critical issues. In: UNSPECIFIED. Paria, S (2006) The mixing behavior of n-alkylpyridinium bromide-NP-9 mixed surfactant systems. Colloids And Surfaces A-Physicochemical And Engineering Aspects , 281 (1). pp. 113-118. Parida, N (1999) Non-destructive testing and evaluation of cast materials. In: UNSPECIFIED. Parker, R T (1968) Trends in the Improving Economic use of Aluminium. In: UNSPECIFIED. Parker, R T (1968) Trends in the Improving Economic use of Aluminium. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR),Jamshedpur. Parker, R T and Jones, G L (1961) Some Aspects of the use of Aluminium in Substitution for other Materials. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Parmar, Kavita and Chaturvedi, Hema T and Akhtar, Md Wasi and Chakravarty, S and Das, S K and Pramanick, A K and Ghosh, M and Panda, A K and Bandopadhyay, N R and Bhattacharjee, S (2009) Characterization of cobalt precipitation tube synthesized through “silica garden” route. Materials Characterization, 60 (8). pp. 863-868. Parmar, Kavita and Chongder, D and Bandopadhyay, N R and Bhattacharjee, S (2011) Investigation on Cu(II) adsorption on cobalt silicate precipitation tube (CSPT) in aqueous medium. Journal of Hazardous Materials, 185 . pp. 1326-1331. Parmar, Kavita and Pramanick, A K and Bandopadhyay, N R and Bhattacharjee, S (2010) Synthesis and characterization of Fe(III)-silicate precipitation tubes. Materials Research Bulletin, 45 (9). pp. 1283-1287. Parthasarathi, M N (1968) The Position of Lead in a Challenging World of Modern Technology. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Parthasarthi, M N (1969) The Position of Lead in a Challenging World of Modern Technology. In: UNSPECIFIED. Patel, R M (1966) Steel strip aluminising. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (2004) Synthesis and sintering characteristics of Y–Ba–Cu-oxide superconductors. Materials Science and Engineering B, 110 (2). pp. 119-131. Pathak, L C and Singh, T B and Verma, A K and Ramachandrarao, P (2000) Synthesis of nano-crystalline alumina powder. Journal of Metallurgy and materials Science, 42 (2). pp. 93-104. Pathak, P N and Chakravorty, N (1991) Barite-Some Observations on its Recovery as a By-Product. NML Technical Journal, 33 (1-2). pp. 17-22. Pathak, P N and Dey, Swapna and Rao, D S and Sahu, K K and Chaterjee, N N (2000) Recycling: An alternative to disposal -A case study on ferro-chrome slag. Journal of Metallurgy and materials Science, 42 (4). pp. 249-253. Pattanaik, M (2000) Dispersion profile of rutile powder in polyacrylic acid solutions by electrokinetics and settling studies. Journal of Metallurgy and materials Science, 42 (4). pp. 227-232. Payne, John W (1960) Examples of the use of Pilot Plants to Obtain Engineering and Economic Information needed for Process Industrialization. In: Symposium on Pilot Plant in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Pazouki, Amir and Yeganeh, Biejan Yousefi (2000) Recovery of lead-zinc from Angouran Mine Iran. Journal of Metallurgy and materials Science, 42 (4). pp. 221-226. Pelzl, Peter (1969) Horizontal continous casting of high-strength aluminium-bronze and other copper-base alloys. In: UNSPECIFIED. Pelzl, Peter (1968) Horizontal Continuous Casting of High-Strength Aluminium-Bronze and other Copper-Base Alloys. In: Symposium on Non-ferrous Metals Technologhy : Papers for presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Perrin, R and Greffe, A (1962) Some Applications of Rapid Metallurgy to the Manufacture of Ferro Alloys. NML Technical Journal, 4 (1). pp. 20-25. Peter, J A and Neelamegam, M and Dattatreya, J K and Rajamane, N P (1999) Utilisation of flyash as cement replacement material to produce high performance concrete. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Phuong, To Duy (2004) A Study on the precipitations of rare earth metals inclusion phase in Fe-Cr-Ni-RE System. Journal of Metallurgy and materials Science., 46 (4). pp. 233-242. Phuong, To Duy and Chien , Pham Tien and Binh, Hoang Thi and Linh, Do Chi (2005) The effect of phase composition and microstructure of 25Cr-6Ni-3Mo-0.25N duplex stainless steel on corrosion resistance. Journal of Metallurgy and Materials Science, 47 (1). pp. 15-23. Pierce, E W (1953) A Summary of Some Typical Steel Failures in Machine Parts & Structural. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Poddar, Palash and Srivastava, V C and De, P K and Sahoo, K L (2007) Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Materials Science and Engineering A, 460-461 . pp. 357-364. Poonawala, N S and Chakrabarti, A K and Prodhan, A (1999) Influence of minor additions of nitrogen and titanium on the carbide morphology and transformations in chromium cast irons. Transactions of the Indian Institute of Metals, 52 (4). pp. 245-250. Post, G (1973) The Optimum Method for Converting Sponge Iron to Steel in Arc Furnaces. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Prabhakar, S (2011) Column Flotation for the Beneficiation of Iron Ore Fines. In: International Conference on Iron and Steel Industry : Emerging Trends (Steelrise 2011), Feb. 1-2. 2011, National Metallurgical Laboratory, Jamshedpur. Prabhakaram, P (1965) Consideration of surface area and crystallinity of Kaolinite as factors in its base exchange capacity. NML Technical Journal, 7 (2). pp. 10-14. Prabhakaram, P and Dey, A K and Rao, Addanki S and Khan, D K (1983) Performance evaluation of zinc rich primer based on soluble silicates. NML Technical Journal, 25 (1-2). pp. 11-19. Prabhakaram, P and Mukherjee, A N and Guha, B K and Dey, A K (1981) Diffusion coating of saddle castings and spacers for boiler applications .1. Calorizing. Transactions of the Indian Institute of metals, 34 (6). 501-&. Prabhakaram, P and Murthy, H P S (1961) Production of dense carbon aggregates from carbonaceous materials for varied volatile contents for use in carbon products in general and soderberg paste in particular. NML Technical Journal, 3 (4). pp. 13-15. Prabhakaram, P and Murthy, H P S (1961) A Study of the Production of Soederberg Paste from Indian Raw Materials. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Pradhan, J and Das, S N and Thakur, R S (1998) Use of activated Red Mud for removal of Phosphate and Selenite from Aqueous Solutions. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 155-162. ISBN 81-87053-28-7 Pradhan, J and Das, S N and Thakur, R S (1998) Use of activated Red Mud for Removal of Phosphate and Selenite from Aqueous Solutions. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 155-162. ISBN 81-87053-28-7 Prakash, S and Goswami, M C and Mahapatra, A K S and Ghosh, K C (2000) Morphology and reduction kinetics of fluxed iron ore pellets. Ironmaking & Steelmaking, 27 (3). pp. 194-201. Prakash, S and Mukherjee, K and Singh, S and Mehrotra, S P (2007) Simulation of energy dynamics of electric furnace steelmaking using DRI. Ironmaking & Steelmaking, 34 (1). pp. 61-70. Prakash, S and Pal, Sital K (2003) On the know-how package. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 206-214. ISBN 81-87053-57-9 Prakash, S and Shah, Liaquat Ali (2010) Impression on Collaboration between NML, India and CARIRI, Trinidad and Tobago. WAITRO News, DIT 4th Strategic Forum WAITRO . pp. 9-10. Prakash, Ved (1968) Physical metallurgy of Aluminium Alloys. In: Symposium on Non-ferrous Metals Technology. NML Jamshedpur, Jamshedpur, pp. 138-147. Prakash, Ved (1968) Physical Metallurgy of Aluminium Alloys. In: Symposium on Non-ferrous Metals Technology: Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR), Jamshedpur. Prakash, Ved (1966) Substitute magnetic materials. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Prakash, Ved and Tewari, C R and Nijhawan, B R (1965) Perminvar effects in some alnico magnets. NML Technical Journal, 7 (3). pp. 25-26. Prakash Narayan, S (2001) Effect of hot workability parameters on the magnetic properties of nano-crystalline Nd-Fe-B magnets. Journal of Metallurgy and materials Science, 43 (2). pp. 135-140. Pramanik, M R and Ganesh, R and Pandey, L P (1981) Rapid Indirect Volumetric Method for Determination of Molybdenum in Ferro-molybdenum. NML Technical Journal, 23 (1 & 2). pp. 20-21. Prasad, Anant (1990) Mathematical Modelling and Application to Solidification in vertical continuous Casting Mould. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Prasad, M S (1972) Infrared study of the adsorption of mixed collectors on Galena and Anglesite. NML Technical Journal, 14 (1). pp. 24-33. Prasad, N B and Tendolkar, G S (1958) Application of Stainless Steels in Nuclear Technology. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Prasad, Ranjit and Shallika, Swati (2010) Molecular approach for phytoremediation and phytomining of metal-contaminated sites. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Prasad, S S and Rao, S B (1968) Beneficiation of Bauxite. In: Symposium on Non-ferrous metals Technology. NML Jamshedpur, Jamshedpur, pp. 38-41. Prasad, Sanjay (2002) Preparation of copper powder from the waste copper solution by the process of cementation. Journal of Metallurgy and materials Science, 44 (4). pp. 217-221. Prasad, Sanjay (2004) Reduction studies on polymetallic sea nodules. Journal of Metallurgy and materials Science, 46 (3). pp. 157-164. Prasad, Sidheswar and Chatterjee, A B (1969) Heat balance for iron making in experimental low-shaft furnace. NML Technical Journal, 11 (4). pp. 68-82. Prasad, Sidheswar and Chatterjee, A B (1973) Reactivity of some low temperature carbonized cokes made from non-coking coals. NML Technical Journal, 15 (2). pp. 29-35. Prasad, V V S and Rao, A S and Prakash, U and Rao, V R and Gupt, K M (2002) Recycling of valuable scrap through electroslag processing. Transactions of the Indian Institute of Metals, 55 (1-2). pp. 9-14. Prasad , S S and Rao, S B (1968) Beneficiation of Bauxite. In: Symposium on Non-ferrous Metals Technologhy : Papers for presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Prasad , Sanjay (2011) Extraction of chromium as Sodium Chromate from Stainless Steel Dust. The Journal of Solid Waste Technology and Management, 37 (1). pp. 40-46. Prasad , T V and Bhaskar Rao, H V (1960) Development of Metallurgical Refractories with Indian Raw Materials - Pilot Plant Studies. In: Symposium on Pilot Plants in Metallurgical Research and Development , 15-18/02/1960, Jamshedpur. Prasad Rao, P D and Satyanarayana, C and Vijayaraghavan, K and Mathur, G P (1972) Beneficiation studies with a pyrite-pyrrhotite sample from Saladipura, Rajasthan. NML Technical Journal, 14 (2). pp. 56-59. Premchand, and Kumar, Vinay and Pandey, B D (1995) Extraction of tungsten from low grade Wolframite Jig concentrate. Metals Materials & Processes, 7 (3). pp. 159-168. Prodhan, A (2011) Semisolid processing of short and long freezing range Cu alloys by electric current. Materials Science and Technology . pp. 1513-1517. Prodhan, A and Sivaramakrishnan, C S and Chakrabarti, A K (2001) Solidification of aluminum in electric field. Metallurgical and Materials Transactions B, 32 (2). pp. 372-378. Puvvada, G V K and Yedavalli, B V S and Rao, A S (1998) Solvent extraction of gallium from Bayer Process liquor (Indal, Muri) using 7-alkyl-substituted-8-hydroxyquinoline (Kelex-100). Transactions of the Indian Institute of Metals, 51 (4). pp. 223-225. QQuarrell, A G (1958) Hydrogen in Steel. In: Symposium on Production, Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. RRadiguet, B and Blavette, D and Wanderka, N and Banhart, J and Sahoo, K L (2008) Segregation-controlled nanocrystallization in an Al–Ni–La metallic glass. Applied Physics Letters, 92 . 103126-1-103126-3. Raghavendran, K and Mitra, N (1997) An Introduction to Indian Standards on Ferro Alloys. In: Proceedings of the National Workshop on Ferro Alloys Industries in the Liberised economy. NML, Jamshedpur, India, Jamshedpur, pp. 14-22. ISBN 81-87053-27-5 Rahman, M M and Tikoo, P K (1989) Effect of basis metals and different solvents on deposition of nickel. NML Technical Journal, 31 (1-4). pp. 18-23. Raj, V and Ali, M Mubarak (2008) Nickel coated aluminium electrode - A sensor for the voltammetric analysis of crystal violet. Journal of Metallurgy and Materials Science, 50 (4). pp. 183-193. Rajagopal, G and Periasamy, V M (2008) Chemical vapor deposition of copper using argon as carrier gas. Journal of Metallurgy and Materials Science, 50 (3). pp. 175-181. Rajak, K K and Yadav, B K and Mandal, R B and Saxena, V K and Mandre, N R (2010) Bio-desulphurization of makum (Assam) coal. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rajan, T V and Saxena, M N (1968) Initial softening in some Aluminium base precipitation hardening Alloys. In: Symposium on Non-ferrous Metals Technology. NML Jamshedpur, Jamshedpur, pp. 122-137. Rajan, T V and Saxena, M N (1968) Initial Softening in Some Aluminium Base Precipitation Hardening Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Rajeev, and Srivastava, S C and Ghosh, M K (1980) X-ray fluorescence analysis of copper-lead-zinc ores. NML Technical Journal, 22 (3-4). pp. 35-40. Rajinikanth, V and Venkateswarlu, K and Sen, Mani Kuntal and Das, Mousumi and alhajeri, S N and Langdon, T G (2011) Influence of scandium on an Al–2% Si alloy processed by high-pressure torsion. Materials Science and Engineering A, 528 (3). pp. 1702-1706. Ram, Atma (1969) Inaugural address. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III- Nickel, Lead, Zinc, Rare Earth, Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-4. Ram, M (2003) Technology Transfer to Small Scale Industries. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 134-137. ISBN 81-87053-57-9 Ram, S (2002) Hard Knock for Developing High-Energy-Density Ferromagnetic Bulk Amorphous Alloys. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Ramachandran, E G and Balasundaram, L J (1959) The nature and structure of the Sigma Phase in Transition Alloys. NML Technical Journal, 1 (2). pp. 28-31. Ramachandran, E G and Dasarathy, C (1960) Stabilization of austenite by hydrogen. Nature, 187 (4738). pp. 684-685. Ramachandran, E G and Dasarathy, C (1961) Transformation of cathodically impregnated and cooled austenite. Nature, 191 (4738). pp. 998-1000. Ramachandrarao, P (2003) Innovation Management. In: Synergy of R&D & Marketing. NML, Jamshedpur, pp. 67-78. ISBN 81-87053-57-9 Ramachandrarao, P (2001) Iron & Steel heritage of India: Contributions from the National Metallurgical Laboratory. Metallurgy in India: A Retrospective . pp. 182-193. Ramachandrarao, P (2002) Is Steel a Sunset Industry ? In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Ramachandrarao, P (2001) National Metallurgical Laboratory: Fifty Golden Years. Metallurgy in India: A Retrospective, NML Golden Jubilee Commemorative Volume ( ). pp. 526-535. Ramachandrarao, P (2000) Solidification of silver-germanium alloys under microgravity conditions. Current Science, 79 (3). pp. 326-327. Ramachandrarao, P (2002) Sustainable Development : Mining and Metals Sectors. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. US2003000393297 (2008) Process for recovery of gallium. US7338589. Ramakrishna, Rao M (1967) Compatibility relationship in the quaternary sub-system CaAl2O4 CaAl4O7-Ca2Al2SiO7-MgAl2O4. NML Technical Journal, 9 (1). pp. 4-8. Ramakrishnan, P (1968) Recent Developments in Powder Metallurgy of Non-ferrous Metals. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Ramakrishnan, P (1969) Recent Developments in power Metallurgy of non-ferrous Metals. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-8. Raman, P V and Narayanan, P I A (1960) Fluorspar and its beneficiation. NML Technical Journal, 2 (2). pp. 18-22. Raman, P V and Narayanan, P I A (1969) Studies on Nundydroog gold ore with a view to improving gold recovery. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-6. Raman, P V and Narayanan, P I A (1968) Studies on Nundydroog Gold Ore with a view to Improving Gold Recovery. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Randhawa, N S and Agarwal, S and Sahu, K K and Jana, R K (2009) Recovery of copper, nickel and cobalt from manganese nodules by Arc furnace smelting. In: International conference of Non-ferrous metals 2009, July 10-11, 2009, Bhubaneswar. Randhawa, N S and Jana, R K and Das, N N (2011) Manganese Nodules Residue: Potential Raw Material for Fesimn Production. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India. Randhawa, N S and Mishra, D and Jana, R K (2011) Smelting of leached sea nodule residue blended with manganese ore for revovery of manganese. The Banaras Metallurgist, 16 . pp. 117-121. Rangachari, P S and Krishnamachar, V S and Gupta, R C and Sant, B R and Korin, S C (1973) Role of microorganisms in winning metals from low-grade ores. NML Technical Journal, 15 (4). pp. 16-24. Ranganathan, M V and Chakrabarti, D M and Chakravorty, N (1979) Beneficiation of low grade graphites of Palamau district. NML Technical Journal, 21 (1-2). pp. 1-5. Ranganathan, S (2004) Control of charge distribution to optimise metal quality in the production of ferro alloys. Journal of Metallurgy and materials Science, 46 (1). pp. 61-65. Ranganathan, S (2005) How the Ferro Alloys Industries Can Benefits From Innovation in the Laboratory. In: Seminar on Ferro alloys and stainless steel - Opportunities, prospects & challenges, 30 Sept and 1 Oct, 2005, Bhubaneswar, India. Ranganathan, S (1998) Interaction of the crucible material with liquid steel during vacuum deoxidation in a magnesium oxide crucible-comparison of a model with experiment. NML Technical Journal, 40 (1). pp. 29-34. Ranganathan, S (2002) Phase rule - A view. Transactions of the Indian Institute of Metals, 55 (8). pp. 551-555. Ranganathan, S (1997) Prediction of multi-phase equilibria in alloy systems by the technique of successive partial equilibration. Calphad, 21 (4). pp. 453-461. Ranganathan, S and Godiwalla, K M (2001) Effect of preheat, bed porosity, and charge control on thermal response of submerged arc furnace producing ferrochromium. Ironmaking & Steelmaking, 28 (3). pp. 273-278. Ranganathan, S and Godiwalla, K M and Chakraborty, D (2011) Investigation of the kinetics of reduction of chromite ore lumps with large particles of coke. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 120 (2). pp. 71-78. Ranganathan, S and Godiwalla, K M and Nath, Paras and Akbar, S A (2000) Influence of electrical parameters on the specific energy consumption and quality of ferrochromium produced in submerged arc furnace. In: 58th Electric Furnace Conference/17th Process Technology Conference, 2000, 58th Electric Furnace Conference. Ranganathan, S and Godiwalla , K M and Satyanarayana, N V (2011) Simulation of Ferrochrome Production in Submerged Arc Furnaces for Optimisation of Specific Energy Consumption. Steel Tech, 5 (3). pp. 25-40. Ranganathan, S and Ramachandrarao, P (2003) Application of transformation diagrams to predict phase transformation in alloys. Calphad, 27 (1). pp. 39-56. Ranganathan, S and Ramachandrarao, P (1997) Non ferrous metals industry in India-An overview. NML Technical Journal, 39 (1). pp. 1-14. Ranganathan, S and Ramachandrarao, P (2010) Thermodynamic modelling of the spontaneous vitrification process using transformation diagrams. Calphad, 34 . pp. 387-392. Rao, Addanki S and Lahiri, A K (1964) Chromate passivate of zinc. NML Technical Journal, 6 (3). pp. 10-14. Rao, Addanki S and Lahiri, A K and Banerjee, T (1960) Corrosion of cast iron pots used for fusing caustic soda. NML Technical Journal, 2 (4). pp. 6-9. Rao, Addanki S and Mukherjee, K P and Lahiri, A K (1962) Galvanic corrosion of ferrous and non-ferrous metal in the industrial atmosphere of Jamshedpur. NML Technical Journal, 4 (4). pp. 17-22. Rao, Bhaskar and Singh, Rabindar (1957) Recent Trends in Refractory Practice in the Non-Ferrous Industry. In: Non-Ferrous Metal Industry in India. NML, Jamshedpur, India, Jamshedpur, pp. 30-33. Rao, Ch. Sridhar (1996) Titanium as an Automotive Material. NML Technical Journal, 38 (2). pp. 43-50. Rao, G N (1970) Design of risers by the cooling curve method. NML Technical Journal, 12 (2). pp. 49-52. Rao, G N and Gupte, P K (1971) Inoculation of cast iron. NML Technical Journal, 13 (1). pp. 19-26. Rao, G N and Prasad, P R (1971) Increase in casting yield by use of exothermic riser. NML Technical Journal, 13 (2). pp. 49-51. Rao, G N and Prasad, P R (1967) Riser dimensioning-a new approach for grey iron castings. NML Technical Journal, 9 (1). pp. 27-28. Rao, G N and Sinha, S K and Beck, T A (1978) The effect of humidity and temperature on the hardening characteristics of sodium silicate bonded self-setting sand mixes. NML Technical Journal, 20 (1-2). pp. 24-29. Rao, G N and Sinha, S K and Beck, T A (1978) The effect of humidity and temperature on the hardening characteristics of sodium silicate bonded self-setting sand mixes. NML Technical Journal, 20 (1-2). pp. 24-29. Rao, K Hanumantha (2010) Revisiting sulphide mineral flotation: a few priorities and directions. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rao, K N P (1958) Alloy and Tool Steel Industry in India. In: Symposium on Production, Properties & Applications of Alloy & Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Rao, K N P (1959) Trend of Steel Demand in India. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Rao, K N P (1959) Trend of Steel Demand in India. NML Technical Journal, 1 (1). pp. 41-46. Rao, M R K and Naidu, N V and Rao, H V Bhaskar (1962) Constitution and variation of lattice parameters of some Indian chromites with magnesia addition and subsequent firing. NML Technical Journal, 4 (4). pp. 4-11. Rao, M R K and Sen, P C and Rao, H V Bhaskar (1959) Magnesite crucibles for use in high frequency induction furnace. NML Technical Journal, 1 (3). pp. 28-32. Rao, P V T and Das, A K (1997) Agglomeration of Chrome Ore Fines for Ferrochrome Making - A Step Towards Increased Competitiveness. In: Proceedings of the National Workshop on Ferro Alloy Industries in the Liberalised Economy. NML, Jamshedpur, India, Jamshedpur, pp. 51-58. ISBN 81-87053-27-5 Rao, P V T and Sripriya, R and Mohanty, O N (2002) March Towards Green Steel Production-Efforts at Tata Steel. In: Clean Technologies for Metallurgical Industries (EWM - 2002), 24-25 January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur. Rao, R K (1973) A Study of Ring Formation of Sponge Iron in the Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Rao, T H and Rao, B V and Acharyulu, S L N (1968) Rapid Determination of Copper in Copper Ores. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Rao, T H and Rao , B V and Acharyulu, S L N (1969) Rapid determination of copper in copper ores. In: Symposium on Non-ferrous Metals Technology. NML Jamshedpur, Jamshedpur, pp. 41-43. Rao, V S (1997) Ferro Alloys Industry Today :the Challenges. In: Proceedings of the National Workshop on Ferro Alloy Industries in the Liberalised Economy. NML, Jamshedpur, India, Jamshedpur, 149- . ISBN 81-87053-27-5 Rao, V V (2003) Commentary on carbon pickup paper. Welding Journal , 82 (1). pp. 91-92. Rao, V V (1996) Rapid solidification processing of some aluminium alloys. NML Technical Journal, 38 (4). pp. 133-150. Rao , Y K (1973) Recent Developments in the Kinetics and Mechanism of the Direct Reduction of Hematite with Solid Carbon. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Rausch, Hans and Cappel, F (1960) Pilot Plants for the Agglomeration of Iron Ores on a Semi-Industrial Scale. NML Technical Journal, 2 (1). pp. 27-34. Ravi Kumar, B and Bhattacharya, D K and Das, Swapan K and Ghosh Chowdhury, S (2000) Premature fatigue failure of a spring due to quench cracks. Engineering Failure Analysis, 7 (6). pp. 377-384. Ravichandran, K and Kumar, N M and Subash, K and Sankara Narayanan, T S N (2001) Mannich base derivatives - A novel class of corrosion inhibitors for cooling water systems. Corrosion Reviews, 19 (1). pp. 29-42. Ravichandran, K and Sankara Narayanan, T S N (2002) Effective screening of scaling inhibitors for cooling water systems - Development of an accelerated electrochemical method. Corrosion Reviews, 20 (1-2). pp. 105-113. Ravindra, M and Singh, Manohar M (1997) Calcium Carbide Production Under Liberalised Economy. In: Proceedings of the National Workshop on Ferro Alloy Industries in the Liberalised Economy. NML, Jamshedpur, India, Jamshedpur, 142- . ISBN 81-87053-27-5 Ravindran, P A and Altekar, V A (1968) Some Experiences in Electro-winning of Aluminium from Fused Chloride Bath. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Ray, A C (1996) An integrated approach to environment friendliness and energy conservation in foundries. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 45-51. Ray, A C (1998) Sustainable technology through pollution prevention programme. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 87-91. ISBN 81-87053-28-7 Ray, Ajoy K and Venkateswarlu, K and Chaudhury, S K and Das, S K and Ravi Kumar, B and Pathak, L C (2002) Fabrication of TiN reinforced aluminium metal matrix composites through a powder metallurgical route. Materials Science and Engineering A, 338 (1-2). pp. 160-165. Ray, Ashok K and Goswami, B and Kumar, S B and Sahay, S K (2008) Damage assessment and life prediction of TBC systems. Journal of Metallurgy and Materials Science, 50 (3). pp. 127-150. Ray, Ashok K and Goswami, B and Singh, M P and Das, D K and Roy, Nilima and Ravi Kumar, B and Dash, Byomkesh and Ray, Ajoy K and Das, Goutam and Rupa, P K P and Parida, N and Das, Arpan and Swaminathan, J and Dwarakadasa, E S (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. Materials Characterization, 57 (3). pp. 199-209. Ray, Ashok K and Sahay, S K and Goswami, B (2003) Assessment of service exposed boiler tubes. Engineering Failure Analysis, 10 (6). pp. 645-654. Ray, Ashok K and Singh, S R and Swaminathan, J and Roy, P K and Tiwari, Y N and Bose, S C and Ghosh, R N (2006) Structure property correlation study of a service exposed first stage turbine blade in a power plant. Materials Science and Engineering A, 419 (1-2). pp. 225-232. Ray, Ashok K and Tiwari, Y N and Chaudhuri, S (2000) Evaluation of mechanical properties and assessment of residual life of a service-exposed water wall tube. Engineering Failure Analysis, 7 (6). pp. 393-402. Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Tarafder, S and Singh, R (2000) Residual life assessment of FCCU reactor plate. Transactions of the Indian Institute of Metals, 53 (3). pp. 427-433. Ray, Ashok K and Tiwari, Y N and Roy, P K and Chaudhuri, S and Bose, S C and Ghosh, R N and Whittenberger, J D (2007) Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant. Materials Science and Engineering A, 454-455 . pp. 679-684. Ray, Ashok K and Tiwari, Y N and Singh, R and Tarafder, S (2000) Prediction of remaining life of a FCCU reactor plate. Engineering Failure Analysis, 7 (2). pp. 75-86. Ray, H S (2002) Some Barriers to Clean Technologies. In: Clean Technologies for Metallurgical Industries - (EWM - 2002), 24-25, January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Ray, M M (1957) The Contradictory Aspects of Certain Factors Affecting the Quality of Brass Ingot for working. In: Non-Ferrous Metal Industry in India. NML, Jamshedpur, India, Jamshedpur, pp. 184-189. Ray, S C (1999) Sintered fly ash aggregate Chinese technology at a glance. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Ray, S K (1957) Electro-Deposition of Tin-Zinc Alloy as a Protective Coating of Ferrous Metals. In: Non-Ferrous Metal Industry in India. NML, Jamshedpur, India, Jamshedpur, pp. 266-271. Rayalu, S and Meshram, S U and Labhasetwar, N K and Biniwale, R and Khanna, P (1999) New frontiers for high value utilisation of fly ash : production of zeolites. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Reddy, Purushottam R and Raghavendra, N R and Sathyagangadharudu, A (2010) The study of banded iron formations of coppermountain belt near Torangal, Bellary District, Karnataka State (India). Journal of Metallurgy and Materials Science, 52 (2). pp. 161-168. Reeve, M R (1961) Present Trends in Methods of Production of Aluminium Alloy Slabs and Billets for Working. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Reeve, M R (1961) Present Trends in Methods of Production of Aluminium Alloy Slabs and Billets for Working. NML Technical Journal, 3 (1). pp. 46-55. Rezai, B and Amini, A and Jorjani, E (2001) The floatation studies on coal fines from Galeran area of Iran. Journal of Metallurgy and materials Science, 43 (3). pp. 175-179. Rhines, F N and Anderson, W A (1966) Substitute solders. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Robiette, A G (1962) The Extraction of Vanadium from Titaniferous Iron Ores. NML Technical Journal, 4 (1). pp. 26-29. Rodriguez, P and Arunachalam, V S (1969) Influence of Interstitials on the mechanical properties of group IV b metals. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-14. Rodriguez, Placid (2004) Non-Destructive Evaluation: Science and Technology. In: The excerpts of the lecture delivered by Dr. Placid Rodriguez, 26/11/2002, Jamshedpur. Rodriguoz, P and Arunachalam, V S (1968) Influence of Interstitials on the Mechanical Properties of Group IVb Metals. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec.1968, CSIR - National Metallurgical Laboratory, Jamshedpur. Ross, H U (1973) The Fundamental Aspects of Iron Ore Reduction. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Roy, B and Basu, S and Roy, T K (1994) Techno-economic aspects of Alternative Metallic Charges in EAF Steelmaking. In: Proceedings of the Workshop on Alternative Charge Materials for Electric Arc & Induction furnaces. NML Jamshedpur, Jamshedpur, pp. 117-224. Roy, G G and Chaudhary, P N and Minj, R K and Goel, R P (2001) Dephosphorization of ferromanganese using BaCO3-based fluxes by submerged injection of powders: A preliminary kinetic study. Metallurgical and Materials Transactions B, 32 (3). pp. 558-561. Roy, H and Bar, H N and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Acoustic emission during monotonic and cyclic fracture toughness tests of 304LN weldments. International Journal of Pressure Vessels and Piping, 87 (10). pp. 543-549. Roy, Mrinal and Bhatnagar, P P (1960) Studies on the extraction of vanadium pentoxide from vanadium bearing titaniferrous magnetite ore of Bihar and Orissa. NML Technical Journal, 2 (2). pp. 27-31. Roy, Nilima and Ghosh, R N and Bose, S C (2010) A stochastic model for evolution of creep damage in engineering materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 665-669. Roy, Nilima and Ghosh, R N and Pandey, M C (2001) Modelling of interaction between creep and oxditaion behaviour for engineering materials. ISIJ International, 41 (8). pp. 915-921. Roy, Nilima and Godiwalla, K M and Dwarakadasa, E S and Ray, Ashok K (2004) Elasto-plastic deformation in thermal barrier coated superalloys. Scripta Materialia, 51 (7). pp. 739-743. Roy, S and Das, Avimanyu and Venkatesh, A S (2007) Characterisation of iron ore from the Jilling area of eastern India with a view to beneficiation. Iron Ore Conference 2007, Proceedings . pp. 179-186. Roy, S N (1961) Scope of Light Alloy Metallurgy in Armament Research. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Roy, Santanu (2003) Interfacing R&D and Marketing: Tacit Knowledge and S &T Manpower Deployment in CSIR, India. In: Synergy of R&D & Marketing. , . NML, Jamshedpur, pp. 12-28. ISBN 81-87053-57-9 Roy, T K (2002) From Waste to Wealth: A Study in Waste Management and Recycling. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM - 2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Roy Choudhury, S K and Aush, S C and Som, P K (1969) Studies in Chlorination : Part I - Magnesite. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-5. Roychoudhury, S K and Aush, S C and Som, P K (1968) Studies in Chlorination : Part I - Magnesite. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Rudrakshi, G B and Srivastava, V C and Ojha, S N (2007) Microstructural development in spray formed Al–3.5Cu–10Si–20Pb alloy and its comparative wear behaviour in different environmental conditions. Materials Science and Engineering A, 457 (1-2). pp. 100-108. Russell, J E and Ludgate, B (1958) The Effect of Variation of Ruling Section on the Mechanical Properties of Carburizing Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. SSachdeva, S S and Mukherjee, J K and Banerjee, T (1973) Studies on manganese nickel system. NML Technical Journal, 15 (1). pp. 1-9. Saha, A K (1998) Purification and enrichment of low grade molybdenite concentrates. NML Technical Journal, 40 (1). pp. 17-21. Saha, A K (1996) Studies on thermal beneficiation of low grade rock phosphate. NML Technical Journal, 38 (1). pp. 37-41. Saha, A K and Akerkar, D D (1987) Fuel oil reduction of polymetallic manganese sea nodules of Indian Ocean for extraction of nickel, copper and cobalt. NML Technical Journal, 29 (1-4). pp. 3-8. Saha, A K and Khan, Z H (1995) Chemical beneficiation of low grade ferroginous bauxite. NML Technical Journal, 37 (3). pp. 83-87. Saha, A K and Khan, Z H (1998) Production of ferrite grade iron oxide from iron ore fines. NML Technical Journal, 40 (4). pp. 131-136. Saha, A K and Khan, Z H (1995) A study on preparation of cobalt powder from chloride solution. NML Technical Journal, 37 (2). pp. 53-60. Saha, A K and Khan, Z H and Akerkar, D D (1988) Recovery of cobalt from ammoniacal raffinate solution generated in processing of polymetallic sea nodules of Indian Ocean. NML Technical Journal, 30 (1-4). pp. 13-16. Saha, A K and Khan, Z H and Premchand, (1997) Removal of silica and sulphur from wolframite concentrates. NML Technical Journal, 39 (1). pp. 15-21. Saha, A K and Kumar, A and Akerkar, D D and Shahani, M J (1972) Production of iron powder from ferrous chloride by hydrogen reduction. NML Technical Journal, 14 (3). pp. 113-118. Saha, A K and Kumar, A and Akerkar, D D and Shahani, M J (1971) Utilization of indigenous steel scrap for iron powder production-A study of dissolution rates of scrap in hydrocholoric acid. NML Technical Journal, 13 (4). pp. 93-99. Saha, A K and Misra, R N and Bhatnagar, P P (1969) Studies on extraction of vanadium by fluo-solid salt roasting. NML Technical Journal, 11 (1). pp. 6-11. Saha, A K and Misra, R N and Bhatnagar, P P (1970) Studies on leaching of bulk Ni-Cu-Mo sulphides. NML Technical Journal, 12 (3). pp. 69-73. Saha, A K and Misra, R N and Bhatnagar, P P (1972) Studies on vapour phase deposition of chromium on graphite. NML Technical Journal, 14 (1). pp. 9-15. Saha, A K and Srinivasan, S R and Akerkar, D D (1985) Acid treatment for purification and enrichment of low grade molybdenite concentrates. NML Technical Journal, 27 (3-4). pp. 46-55. Saha, A K and Srinivasan, S R and Akerkar, D D (1985) Removal of copper and nickel from low grade molybdenite concentrates. NML Technical Journal, 27 (3-4). pp. 40-45. Saha, P (1999) Light-weight aggregates for advanced civil engineering. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Sahay, S K and Singh, S K and Goswami, B and Ray, A K (2006) Perspectives of innovation scenarios in Titanium base alloys - A review. Journal of Metallurgy and Materials Science, 48 (4). pp. 181-204. Sahay, Sunil Kishor (2008) Spinodal decomposition in Co-3 Ti(wt.%) alloy. Spinodal decomposition in Co-3 Ti (wt. %) alloy, 50 (1). pp. 33-43. Sahoo, K L and Das, S K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al–Fe–V–Si alloys. Materials Science and Engineering A, 355 (1-2). pp. 193-200. Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2000) Modification of cast structure in Al-8 center dot 3Fe-0 center dot 8V-0 center dot 9Si alloy by magnesium treatment. Materials Science and Technology, 16 (2). pp. 227-230. Sahoo, K L and Wollgarten, M and Banhart, J (2007) Effect of solidification rate and composition on microstructure and crystallization in Al-Ni-La metallic glasses. Transaction of Indian Institute of Metals, 60 (2). pp. 349-354. Sahoo, K L and Wollgarten, M and Haug, J and Banhart, J (2005) Effect of La on the crystallization behaviour of amorphous Al94 − xNi6Lax (x = 4–7) alloys. Acta Materialia, 53 (14). pp. 3861-3870. Sahu, K C (1999) Characterization and utilisation of fly ash. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Sahu, K K and Alex, T C and Mishra, D and Agrawal, A (2006) An overview on the production of pigment grade titania from titania-rich slag. Waste Management & Research, 24 (1). pp. 74-79. Sahu, K K and Das, R P (2000) Mixed solvent systems for the extraction and stripping of iron(III) from concentrated acid chloride solutions. Metallurgical and Materials Transactions B, 31 (6). pp. 1169-1174. Sahu, K K and Mishra, D and Ghosh, S and Jana, R K and Agrawal, A (2009) Selective dissolution of chalcopyrite in chloride media. Journal of Metallurgy and Materials Science, 51 (3). pp. 215-233. US2002000095526 (2004) Process for recovery of nickel from spent catalyst. US6733564. EP2002000708620 (2006) Process for the recovery of nickel from spent catalyst. EP1488015B1. Sahu, Ranjan K and Ray, Ajoy K and Mishra, T and Pathak, L C (2008) Microwave-Assisted Synthesis of Magnetic Ni Wire from a Metal−Organic Precursor Containing Ni(II) and Triethanolamine. Crystal Growth & Design, 8 (10). pp. 3754-3760. Sahu, Rina and Kailath, A J and Chatterjee, S and Sahoo, K L (2009) Effect of La content on the room temperature ageing behavior of Al90-xNi6La4+x (x = 0 to 3) metallic glasses. Materials Science and Engineering A, 527 (6). pp. 1339-1342. Sahu, S K and Asselin, E (2011) Characterization of residue generated during medium temperature leaching of chalcopyrite concentrate under CESL conditions. Hydrometallurgy, 110 (1-4). pp. 107-114. Sahu, S K and Sahu, K K and Pandey, B D (2006) Leaching of zinc sulfide concentrate from the ganesh-himal deposit of nepal. Metallurgical and Materials Transactions B, 37 (4). pp. 541-549. Salem, Eng. M W (1973) Reducibility of Aswan Ore and Sinters with Varying Basicity Ratios. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Samal, S and Chaira, D and Chaira, B (2011) Production and stability of al and cu ultrafine particles in nanofluids. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Samanta, Shipra and Misra, R N and Bhatnagar, P P (1968) Studies on the extraction of nickel from the nickeliferous laterites of Badampur area, Orissa. NML Technical Journal, 10 (2). pp. 15-18. Samanta, Shipra and Misra, R N and Bhatnagar, P P (1965) Thermal beneficiation of low-grade chrome ore from Vagda deposits, Ratnagiri District, Maharashtra. NML Technical Journal, 7 (4). pp. 13-16. Samata, Sipra and Misra, R N and Bhatnagar, P P (1964) Thermal beneficiation of low grade chrome ore from Enuconda deposits, West Godavari District, Andhra. NML Technical Journal, 6 (4). pp. 12-16. Samek , Norbert (1968) Testing of liquid and solidification contraction of aluminium alloys. In: Symposium on Non-ferrous Metals Technology. NML Jamshedpur, Jamshedpur, pp. 106-114. Sampath, J R (1972) Fifty years of development of copper extraction. NML Technical Journal, 14 (2). pp. 44-46. Sampath, V S and Basak, G and Bhatnagar, P P (1967) Removal of oxide coating from magnesium powder. NML Technical Journal, 9 (2). pp. 18-19. Sampath, V S and Bhatnagar, P P (1961) Production of low carbon ferro-chrome from high carbon ferro-chrome. NML Technical Journal, 3 (2). pp. 19-27. Sankaran, C and Srinivasan, S R and Akerkar, D D (1973) Recovery of copper from dilute solutions. NML Technical Journal, 15 (4). pp. 32-41. Santokh, Singh R and Virdhi, P S (1981) Oxygen enriched hot air blast cupola iron melting. NML Technical Journal, 23 (1-2). pp. 16-19. Santokh, Singh R and Virdhi, P S (1989) A small melting furnace for rural sector. NML Technical Journal, 31 (1-4). pp. 28-32. Santokh, Singh R and Virdhi, P S and Gupta, K N (1987) Studies on optimisation of sponge iron as a charge material for cupola. NML Technical Journal, 29 (1-4). pp. 14-19. Sanyal, P and Rajeev, and Gupta, K K (1977) Comprehension methods of chemical analysis of low alloy steel. NML Technical Journal, 19 (3-4). pp. 47-51. Sarangi, B M and Kesav, Babu and Sheshadri, M K (2002) Environmental Control Measures in Sponge Iron Industry with Particualr Reference to Tata Sponge Iron Limited. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Saratchandran, N and Garg, R K and Sundaram, C V and Katiyar, H C (1969) The present status and the projected programme of Zirconium development in India. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-10. Sarin, H C (1971) Iron and Steel industry: Our problems & aspirations. NML Technical Journal, 13 (2). pp. 33-36. Sarkar, B and Das, Avimanyu and Mehrotra, S P (2008) Study of separation features in floatex density separator for cleaning fine coal. International Journal of Mineral Processing, 86 (1-4). pp. 40-49. Sarkar, Jaydeb (2002) Use of Metallic Materials as Medium of Architectural Expression. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Sarkar, S B (2003) Role of Indigenous R&D in the Present Industrial Scenario. In: Synergy of R&D & Marketing. NML, Jamshedpur, pp. 29-35. ISBN 81-87053-57-9 Sarkhel, B K and Bhattacharyya, K K and Saha, P and Chattoraj, U S and Maulik, S C (2000) Effect of grinding on beneficiation of a low grade limestone sample. Journal of Metallurgy and materials Science, 42 (4). pp. 215-219. Sasikumar, C (2009) The effect of mechanical activation on energetics and dissolution kinetics of Indian beach sand ilmenite. PhD thesis, IT, Banaras Hindu University Varanasi. Sasikumar, C and Rao, D S and Srikanth, S and Mukhopadhyay, N K and Mehrotra, S P (2007) Dissolution studies of mechanically activated Manavalakurichi ilmenite with HCl and H2SO4. Hydrometallurgy, 88 (1-4). pp. 154-169. Sasikumar, C and Srikanth, S and Kumar, Rakesh and Alex, T C and Mehrotra, S P (2011) Where does the energy go in high energy milling? In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Sastry, P R and Bhandary, V S and Gupte, P K and Nijhawan, B R (1967) Shell moulding with indigenous raw materials. NML Technical Journal, 9 (1). pp. 29-34. Satendra, Kumar and Sankara Narayanan, T S N and Saravana Kumar, S (2010) Influence of fluoride ion on the electrochemical behaviour of β-Ti alloy for dental implant application. Corrosion Science, 52 (5). pp. 1721-1727. Satyanarayana, N V (2003) Creativity, Innovation and Problem Solving. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 96-110. ISBN 81-87053-57-9 Sau, D C and Biswal, K C (2011) Computational fluid dynamics and experimental study of the hydrodynamics of a gas–solid tapered fluidized bed. Applied Mathematical Modelling, 35 (5). pp. 2265-2278. Sau, D C and Mohanty, S and Biswal, K C (2009) Bed Fluctuation Ratio for Regular and Irregular Particles in Gas-Solid Tapered Fluidised Beds. Indian Chemical Engineer, 51 (2). pp. 1-10. Sau, D C and Sengupta, Rajarshi and Bandopadhyay, D (2011) Development of Model for the Estimation of Coke Bed Voidage and the Liquid levels in the Blast Furnace Hearth. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted) Sawaguchi, Takahiro and Sahu, Puspendu and Kikuchi, Takehiko and Ogawa, Kazuyuki and Kajiwara, Setsuo and Kushibe, Atsumichi and Higashino, Masahiko and Ogawa, Takatoshi (2006) Vibration mitigation by the reversible fcc/hcp martensitic transformation during cyclic tension–compression loading of an Fe–Mn–Si-based shape memory alloy. Scripta Materialia, 54 (11). pp. 1885-1890. Saxena, Mohini and Asokan, P (1999) Coal ash utilization in building and agricultural applications. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Schjelderup, G (1959) ELPIT-The Electric Soaking Pit. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Schmiedl, J and Holeczy, J and Sehnalek, F (1969) Continuous production of copper from concentrates. In: Symposium on Non-ferrous Metals Technology. NML, Jamshedpur, Jamshedpur, pp. 44-53. Schwartz, W and Haase, W (1964) Short rotary furnace and its application in the treatment of battery scrap. NML Technical Journal, 6 (1). pp. 42-44. Scortecci, A (1959) Colour Metallography of Ferrous Alloys and its Applications to iron and Steel Making. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Scott, D (1969) Study of hard non-ferrous materials for Arduous conditions of Rolling contact. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-7. Scott, D (1968) Study of Hard Non-ferrous Materials for Arduous Conditions of Rolling Contact. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Scott, D (1966) Substitute alloys as bearing materials. NML Technical Journal, 8 (1). pp. 25-30. Scott, D (1966) Substitute alloys as bearing materials. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Scott, D (1966) Substitute Alloys as Bearing Materials. NML Technical Journal, 8 (1). pp. 24-30. Seehra, S S and Krishnmurthy, (1999) A study on techno-economic aspects for highway projects. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Seetharamayya, O and Harman, C N and Narasimham, A V L and Saraf, A (1997) Production of Intermediate or Medium Carbon Ferro Chrome at FACOR. In: Proceedings of the National Workshop on Ferro Alloys Industries in the Liberised economy. NML, Jamshedpur, India, Jamshedpur, pp. 23-36. ISBN 81-87053-27-5 Sen, B L (1959) Refining of Indian Pig iron in an Experimental L-D Oxygen Converter(II). In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Sen, B L and Nijhawan, B R and Chatterjea, A B (1959) L-D Oxygen Converter (1). In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Sen, M C and Banerjee, T (1966) Recovery of lead from scraps. NML Technical Journal, 8 (3). pp. 33-37. Sen, P C and Rao, M R K and Bhaskar Rao, H V (1964) The suitability of Jainti dolomite for sintering in shaft kilns. NML Technical Journal, 6 (2). pp. 32-34. Sen, P K (1996) Emerging trends in the design of pollution control system for metallurgical industries. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 30-37. Sen, Ranjan (1997) Production of ferro Manganese Through Blast Furnace Route. In: Proceedings of the National Workshop on Ferro Alloy Industries in the Liberalised Economy. NML, Jamshedpur, India, Jamshedpur, pp. 83-91. ISBN 81-87053-27-5 Sen, S K and Banerjee, N L (1994) A new technique of decomposition of chrome ores for subsequent determination of Al, Fe, Ca and Mg. NML Technical Journal, 36 (1). pp. 25-30. Sengupta, B and Kumar, A and Hashim, M A and Ramakanth, C (1998) Nickel and chromium in wastewater - The Malaysian experience. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 27-51. ISBN 81-87053-28-7 Sengupta, B L and Chatterjea, A B and Mathur, G P and Altekar, V A (1973) Operational Aspects of Sponge Iron Production in a Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Sengupta, K G (1994) Comparative studies on analytical methods for carbon and sulphur determination. NML Technical Journal, 36 (3). pp. 105-110. Sengupta, P L (1993) Choice and surface preparation of the cathode used for electrowinning of manganese metal. NML Technical Journal., 35 (1-2). pp. 19-23. Sengupta, P L and Sinha, P K and Aush, S C (1994) An approach to produce pure manganese sulphate solution by Jarosite Process. NML Technical Journal, 36 (2). pp. 55-63. Sengupta , P L (1992) Effect of Flocculants on the Settling Rate of Electrolytic Manganese Metal Process Slurries. NML Technical Journal, 34 (3-4). pp. 23-28. Sewell, J F (1958) The Molybdenum-Boron Structural Steel. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Shahani, M J and Banerjee, T (1960) Metallurgical Pilot Plants. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Shaik, Abdul azees and Pal, Saumit and Jha, Rajeev (2005) Briquetting : A new approach to recycle the waste iron-bearing materials generated in steel plants. Journal of Metallurgy and Materials Science, 47 (4). pp. 199-206. Shaik, Shamshad and Bagchi, Sudeep and Ghosh, S and Mukherji, A K (2010) Beneficiation of iron ore fines to improve blast furnace productivity. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Shakhtshneider, T P and Myz, S A and Mikhailenko, M A and Dyakonova, M A and Boldyrev, V V (2011) Mechanochemistry and solubilization of drugs. In: International Conference on Mechanochemistry and Mechanical Alloying, 1-4 December 2008, CSIR-NML, Jamshedpur. Shanmuganathan, P and Lakshmipathiraj, P and Satendra, Kumar and Sumathy, A and Srikanth, S (2011) Stability of Copper Smelter Slag in Sea Water. Environmental Progress and Sustainable Energy, 30 (3). pp. 1-9. Sharan, Rajendra and Swarup, D (1961) Determination of Vacant Lattice Sites in Aluminium Alloys by X-ray Diffraction Technique. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Sharma, B D and Tiwari, G P and Ray, S P (1969) Diffusion in bcc Transition Metals. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-16. Sharma, B D and Tiwari, G P and Ray, S P (1968) Diffusion in bcc Transition Metals. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Sharma, C and Banerjee, T (1968) Non-ferrous metals in India. In: Symposium on Non-ferrous Metals Technology. NML Jamshedpur, Jamshedpur, pp. 169-179. Sharma, C and Pramanik, S (1971) Some observations on isothermal ageing behaviour of wrought Al-Mg-Si alloys. NML Technical Journal, 13 (3). pp. 80-82. Sharma, Manoj Kumar (1998) Initiatives in Environment Management undertaken by the Small Industries Development Bank of India. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 163-166. ISBN 81-87053-28-7 Sharma, N K (2003) Factors to be Considered for Technology Assessment and Valuation. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 143-163. ISBN 81-87053-57-9 Sharma, R and Bose, S K (1982) Using lattice parameter to estimate activation energy. NML Technical Journal, 24 (3-4). pp. 28-30. Sharma, R P and Basu, G S and Prasad, S B and Dhillon, A S (2002) Steel Industry and Climate Change. In: Clean Technologies for Metallurgical Industries (EWM)-2002, 24-25, January, 2002, CSIR- National Metallurgical Laboratory, Jamshedpur. Sharma, S C and Girish, B M and Kulkarni, R S and Kamath, R (1996) Drillability of zinc/graphite metal matrix composites. NML Technical Journal, 38 (3). pp. 127-131. Sharma, S C and Girish, B M and Kulkarni, R S and Kamath, R (1996) Machinability of zinc alloy based particulate metal matrix composites. NML Technical Journal, 38 (3). pp. 107-111. Sharma, S C and Girish, B M and Rao, P R (1996) Tribological properties of zinc alloy based composites for bearing applications. NML Technical Journal, 38 (2). pp. 73-76. Sharma, S C and Venkatesh, J and Girish, B M (1996) Mechanical properties of lead alloy based composite materials for battery applications. NML Technical Journal, 38 (3). pp. 95-100. Sharma, T L and Trehan, Y N (1984) Integral colour anodizing of aluminium and its alloys in organic and mixed acid baths. NML Technical Journal, 26 (3-4). pp. 37-43. Sharma And, C and Banerjee, T (1968) Non-ferrous Metals in India. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Shavrin, S V and Shenouda, F N and Sherif, S A (1962) Process-Analysis of the Reduction of Ores and Sintered Material as a Function of Time. NML Technical Journal, 4 (3). pp. 18-21. Sheila, D and Sankaran, C and Khangaonkar, P R (1991) Studies on the extraction of magnesia from low grade magnesites by carbon dioxide pressure leaching of hydrated magnesia. Minerals Engineering, 4 (1). pp. 79-88. Sheth, K G and Sundararajan, J and Rama Char, T L (1961) Corrosion of Aircraft Aluminium Alloys in Acid Solutions & its Prevention by Inhibitors. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Shimoda, Hideo and Onodera, S (1953) A Contribution to the Service Failure of Large Chilled Iron Rolls due to Fatigue. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Shrader, H and Pranjpe, V G (1953) Factors Influencing the Formation of Flakes in Steel. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Singh, A J and Mathur, B S (1968) Preparation of Electronics Grade Bismuth, Antimony, Tellurium, Cadmium and Zinc by Vacuum distillation and Zone refining. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Singh, A J and Mathur, B S and Suryanarayana, P and Tripathi, S N (1969) Preparation of Electronics grade Bismuth, Antimony, Tellurium, Cadmium and Zinc by Vaccum distillation and Zone refining. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 82-91. Singh, A K and Singh, R P and Sarkar, A K and Sharma, V N (1996) Fly Ash- Its Impact on Yield and Trace Metal uptake by Crops Grown in Acid Soils. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 192-198. Singh, B N (1974) Nickel catalyst-A review. NML Technical Journal, 16 (1-2). pp. 23-26. Singh, B N (1972) Preparation of granular silver catalyst. NML Technical Journal, 14 (4). pp. 127-128. Singh, B N (1970) Silver as catalyst. NML Technical Journal, 12 (3). pp. 83-85. Singh, B N and Kar, B C and Banerjee, T (1966) Manganese carbonate from low-grade Indian manganese ores. NML Technical Journal, 8 (2). pp. 20-22. Singh, D D N (1996) Inhibition mechanism, testing and industrial applications of corrosion inhibitors. NML Technical Journal, 38 (1). pp. 1-23. Singh, D D N and Banerjee, M K and Nag, P S (1982) Inhibition and polarization studies of titanium in sulphuric and hydrochloric acid solutions. NML Technical Journal, 24 (3-4). pp. 31-35. Singh, D D N and Dey, A K and Sharma, D S (1993) An improved process for the pickling of copper and copper based alloys. NML Technical Journal, 35 (1-2). pp. 6-12. Singh, D D N and Dey, A K and Singh, B K (1996) Evaluation of corrosion resistance of galvanised coatings produced on steel surface through different routes. NML Technical Journal, 38 (4). pp. 151-160. Singh, D D N and Dey, M (1998) Chloride based bright zinc plating baths: A comparative evaluation. NML Technical Journal, 40 (1). pp. 1-10. Singh, D D N and Dey, M and Singh, V (2002) Role of buffering and complexing agents in zinc plating chloride baths on corrosion resistance of produced coatings. Corrosion, 58 (11). pp. 971-980. Singh, D D N and Gaur, B and Ghosh, Rita and Singh, B K (1998) Role of corrosion inhibitors or grain boundary corrosion control of Cr-Mn-Cu stainless steel in pickling solution. NML Technical Journal, 40 (3). pp. 77-86. Singh, D D N and Gaur, B and Singh, B K and Ghosh, R (1998) Effective inhibition of corrosion of steel in phosphoric acid solution. NML Technical Journal, 40 (2). pp. 35-44. Singh, Gurdial and Kar, B C (1965) Studies on the properties of cryolite by fluoboric acid process. NML Technical Journal, 7 (3). pp. 21-24. Singh, H (1976) Some aspects of designing electric tunnel kilns for ceramic industry. NML Technical Journal, 18 (3). pp. 47-53. Singh, H (1969) Some observations and design and construction of high temperature furnaces. NML Technical Journal, 11 (3). pp. 21-25. Singh, H (1963) Some observations on electrical power distribution system of heavy integrated metallurgical pilot plants. NML Technical Journal, 5 (4). pp. 24-28. Singh, H and Nijhawan, B R (1966) A high temperature graphitizing furnace for laboratory use. NML Technical Journal, 8 (2). pp. 23-25. Singh, Inder and Bhattacharjee, A K (1993) Electrochemical differentiation between aluminised and galvanised steels in aerated chloride environments. Anti-Corrosion Methods and Materials, 40 (6). pp. 4-6. Singh, K K (2000) Refractories for iron and steel making: Recent trends and future prospects. Journal of Metallurgy and materials Science, 42 (2). pp. 75-79. Singh, K K and Chatterjee, B (1997) Cost-Effective Quality Refractories for Ferro-Alloy Smelting Furnaces. In: Proceedings of the National Workshop on Ferro Alloy Industries in the Liberalised Economy. NML, Jamshedpur, India, Jamshedpur, pp. 143-148. ISBN 81-87053-27-5 Singh, K K and Mankhand, T R and Sinha, S N (2010) High temperature treatment of waste printed circuit boards to recover valuable metals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Singh, M K and Banerjee, M K and Narang, S K (2004) A study on eco-friendly chromate-free passivation of galvanised steels. Journal of Metallurgy and materials Science, 46 (3). pp. 183-189. Singh, M N and Singh, Inder (1985) Polarisation studies of the cold rolled steel in sulphuric acid containing metallic ions and an inhibitor. NML Technical Journal, 27 (1-2). pp. 3-8. Singh, Manjeet and Kumar, Rajendra (1969) Founding properties on non-ferrous liquid metals. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-9. Singh, Manjit and Kumar, Rajendra (1968) Founding Properties of Non-ferrous Liquid Metals. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Singh, Narinder and Jan, Sosin (1965) Recovery of zinc and lead from the slime obtained from electrolytic zinc plant. NML Technical Journal, 7 (3). pp. 15-20. Singh, Narinder and Mathur, S B (1970) Recent trends in extraction of selenium & tellurium from electrolytic copper slimes. NML Technical Journal, 12 (4). pp. 101-110. Singh, Narinder and Muthukrishnan, V and Rogozinski, T (1970) Viscosity of blast furnace slags and its effects on their applications. NML Technical Journal, 12 (1). pp. 12-21. Singh, P K and Ranganath, V R and Tarafder, S and Prasad, Prabha and Bhasin, V and Vaze, K K and Kushwaha, H S (2003) Effect of cyclic loading on elastic–plastic fracture resistance of PHT system piping material of PHWR. International Journal of Pressure Vessels and Piping, 80 (10). pp. 745-752. Singh, R and Banerjee, S (1990) Morphological and compositional changes of the carbides in a ferritic steel after long term service exposure. Scripta Metallurgica et Materialia, 24 (6). pp. 1093-1098. Singh, R N and Das, L N (1988) Design and development of temperature controller for thermostat hot reference junction. NML Technical Journal, 30 (1-4). pp. 35-36. Singh, Raghubir (2000) A mechanism based approach for remaining life assessment of components exposed to prolonged creep. Transactions of the Indian Institute of Metals, 53 (3). pp. 175-183. Singh, Raghuvir and Chattoraj, I and Kumar, Anil and Ravi Kumar, B and De, P K (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AISI 304 stainless steel. Metallurgical and Materials Transactions A, 34 (11). pp. 2441-2447. Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I (2008) Modification of Sensitization Resistance of AISI 304L Stainless Steel through Changes in Grain Size and Grain Boundary Character Distributions. Metallurgical and Materials Transactions A, 39 (10). pp. 2504-2512. Singh, Raghuvir and Singh, M N (1998) Tape coatings: A review. NML Technical Journal, 40 (4). pp. 123-129. Singh, Rajesh Kumar (2010) The corrosion protection of stainless steel in phosphate fertilizer industry. Journal of Metallurgy and Materials Science, 52 (2). pp. 173-180. Singh, Rajesh Kumar (2011) Inhibition of the corrosion of mild steel in the pulp and paper industry. Journal of Metallurgy and Materials Science, 53 (4). pp. 411-418. Singh, Ratnakar and Maulik, S C and Rafiuddin, S and Kunwar, R K and Banerjee, B and Sil, S K (1996) Recovery of Values from Mining and Industrial Wastes. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 75-85. Singh, Ratnakar and Singh, N and Singh, B P (1994) Chelating type reagents as flotation collector. NML Technical Journal, 36 (1). pp. 19-24. Singh, S K and Akerkar, D D (1975) A continuous and self regulating method for making copper powder by electrolysis. NML Technical Journal, 17 (1-2). pp. 23-26. Singh, S R (1999) Principle of microscopy. In: Materials characterization techniques: principles and applications. NML, Jamshedpur, pp. 69-90. ISBN 81-87053-29-1 Singh, Santokh R and Virdhi, P S and Chatterjea, A B (1973) Production of molten pig iron fine grained iron ore, Fuel and Limestone. NML Technical Journal, 15 (2). pp. 36-41. Singh, Sardar Swaran and Nijhawan, B R (1959) Role of Foundrymen in the Five Year Plans. NML Technical Journal, 1 (3). pp. 43-45. Singh, Satnam and Mitra, A and Panda, A K (2009) Magnetic and structural evolution in Ni-rich off-stoichiometric NiMnGa melt spun ribbons. Journal of Metallurgy and Materials Science, 51 (3). pp. 197-203. Singh, U P and Lal, B B and Rao, V B and Bhattacharyya, P (1996) Commissioning of Dedusting System for Electric are Furnaces and Utilisation of EAF Dusts recovered from Baghouse at SMS. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 125-128. Sinha, A N and Parida, N and Das, S and Mohanty, O N (1994) Low cycle fatigue failure of pressurised storage tank. NML Technical Journal, 36 (2). pp. 65-81. Sinha, A N and Ranganath, V R and Das, N K and Mohanty, O N (1994) Failure analysis of an isolation valve of LPG storage tank. NML Technical Journal, 36 (3). pp. 83-94. Sinha, Arvind and Chakraborty, J and Das, Swapan K and Rao, Venkatesh and Ramachandrarao, P (2001) Oriented arrays of nanocrystalline magnetite in polymer matrix produced by biomimetic synthesis. Materials Transactions, 42 (8). pp. 1672-1675. Sinha, Arvind and Das, S K and Rao, Venkatesh and Ramachandrarao, P (2000) Synthesis of organized inorganic crystal assemblies. Current Science, 79 (5). pp. 646-648. Sinha, D P and Singh, Kanhaya and Sanyal, S K and Pandey, S N (1969) Chemical and electrochemical studies on chromate passivation of brass. In: Symposium on Non-ferrous Metals Technology. NML, Jamshedpur, Jamshedpur, pp. 105-109. Sinha, D P and Singh, Kanhaya and Sanyal, S K and Pandey, S N (1968) Chemical and Electrochemical Studies on Chromate Passivation of Brass. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Sinha, N C and Sanyal, J M and Das Gupta, N N and Lahiri, A (1959) Correlations among some Physical Properties of Coke - a Statistical Study. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Sinha, Prayag and Jha, Manis K (2011) Solvent Extraction of Copper from Synthetic Solution of PCB Leach Liquor using LIX984N. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted) Sinha, S B and Ayyamperumal, M (1997) Technology of Ferro Alloys Making in India - A status and Recent Developments. In: Proceedings of the National Workshop on Ferro Alloy Industries in the Liberalised Economy. NML, Jamshedpur, India, Jamshedpur, pp. 133-141. ISBN 81-87053-27-5 Sinha, S K and Rao, G N (1976) Cellular metal. NML Technical Journal, 18 (2). pp. 21-24. Sinha, S N and Agrawal, M K (1996) Minimization of Waste Generation in Steel Sectors. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 146-153. Sinha, S N and Agrawal, M K and Prasad, R B (2000) Environmental problems and its control in non-ferrous metal industries. Journal of Metallurgy and Materials Science , 42 (4). pp. 255-267. Sinha, S N and Agrawal, M K and Prasad, R B and Singh, K K (2002) Proper Management of Metallurgical Wastes - A Paramount Necessity for clean Environment. In: Clean Technologies for Metallurgical Industries - (EWM - 2002), 24-25, January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Sinha, S N and Agrawal, M K and Saha, R K (1998) Pollution and its Control in Copper Industry. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 185-196. ISBN 81-87053-28-7 Sinhababu, S K and Sinha, S K and Rao, G N (1977) Ferro-chrome slag as harderner for sodium silicate bonded sand. NML Technical Journal, 19 (3-4). pp. 58-60. Sinhamahapatra, A K and Kar, B C (1966) Investigations on granulated cupola slag in cement making. NML Technical Journal, 8 (3). pp. 29-32. Sivaprasad, S and Paul, Surajit Kumar and Narasaiah, N and Tarafder, S (2010) Experimental investigation on cyclic deformation behaviour of primary heat transport piping materials: Masing analysis of hysteresis loops. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 559-563. Sivaprasad, S and Tarafder, S and Tarafder, Mita and Ray, K K (2000) An alternative method of decreasing ΔK FCGR testing. International Journal of Fatigue, 22 (7). pp. 593-600. Sivaramakrishnan, C S (1973) Bearing materials-A general appraisal. NML Technical Journal, 159 (3). pp. 69-75. Sivaramakrishnan, C S (1981) Modern concepts in solidification and structure of cast iron. NML Technical Journal, 23 (1-2). pp. 11-15. Sivaramakrishnan, C S (1978) Stability of liquid lead base alloys: Some simple consideration. NML Technical Journal, 20 (3-4). pp. 31-34. Sivaramakrishnan, C S (1978) Thermodynamic properties of liquid lead tin system by EMF method. NML Technical Journal, 20 (1-2). pp. 20-23. Sivaramakrishnan, C S (1978) Thermodynamic properties of liquid lead tin system by EMF method. NML Technical Journal, 20 (1-2). pp. 20-23. Sivaramakrishnan, C S and Chowdhury, K M and Kumar, Rajendra (1971) Impact of melting procedures on foundry technology of aluminium. NML Technical Journal, 13 (1). pp. 1-7. Sivaramakrishnan, C S and Kumar, Rajendra (1979) Models for liquid metals-A metallurgical appreciation. NML Technical Journal, 21 (3-4). pp. 21-24. Sivaramakrishnan, C S and Kumar, Rajendra (1980) Models for metallic solution-liquids. NML Technical Journal, 22 (1-2). pp. 1-8. Sivaramakrishnan, C S and Mahanti, R K (1984) Basics of degassing of aluminium melts. NML Technical Journal, 26 (1-2). pp. 5-10. Sivaramakrishnan, C S and Mahanti, R K (1982) The effect of solute and melt treatment on precipitation behaviour of Al-Cu and Al-Zn-Mg alloys. NML Technical Journal, 24 (3-4). pp. 22-27. Sivaramakrishnan, C S and Mohanty, R K and Lal, Kishori (1996) Zinc-aluminium alloys for automobile applications. NML Technical Journal, 38 (3). pp. 123-126. Som, P K (1965) Role of the National Metallurgical Laboratory, Jamshedpur, India, in the Field of Non-ferrous Metallurgy. Bulletin of the Research Institute of Mineral Dressing and Metallurgy, 21 (1). p. 30. Som, P K and Chakravarti, P B and Banerjee, T (1961) Electrolytic Production of Magnesium & Magnesium Alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Som, P K and Roychoudhury, S K and Chakravarti, H K (1977) Preparation of anhydrous magnesium chloride in fluidised bed. NML Technical Journal, 19 (2). pp. 33-38. Som, P K and Roychowdhury, S K (1982) Recovery of metal values from industrial wastes. NML Technical Journal, 24 (1-2). pp. 8-11. Soma, Kumar K and Chowdhury, A P (1961) A photoelectric temperature controller. NML Technical Journal, 3 (3). pp. 29-31. Somayajulu, B V and Mohan, Jatinder and Bhatnagar, S S (1961) Some aspects of silicate bonding with and without CO2. NML Technical Journal, 3 (3). pp. 15-19. Sridhar, G (1999) Scanning electron microscopy: basic principles and applications. In: Materials characterization techniques: principles and applications. NML, Jamshedpur, pp. 91-107. ISBN 81-87053-29-1 Srikanth, S (2010) Annual Report 2009-2010. CSIR-National Metallurgy Laboratory, Jamshedpur. ISBN 0972-4273 Srikanth, S (2011) Annual Report 2010-2011. CSIR-National Metallurgy Laboratory, Jamshedpur. ISBN 0972-4273 Srikanth, S (2012) CSIR-NML Annual Report 2011-12. CSIR-National Metallurgy Laboratory, Jamshedpur. (In Press) Srikanth, S and Goel, R P and Ramachandrarao, P (1999) Limitations of a regular associated solution approximation in describing the thermodynamic behaviour of complex liquid alloys. Calphad, 23 (1). pp. 85-100. Srikanth, S and Jacob, K T (1989) Activities in Liquid Ga-Te alloys at 1120 K. Thermochimica acta, 153 ( ). pp. 27-35. Srikanth, S and Jacob, K T (1988) Thermodynamic consistency of the Interaction Parameter Formalism. Metallurgical and Materials Transaction B, 19 (2). pp. 269-275. Srikanth, S and Jacob, K T (1989) Thermodynamic Properties of Copper-Nickel Alloys Measurments and Assessment. Materials Science Technology, 5 (5). pp. 427-434. Srikanth, S and Jacob, K T (1991) Thermodynamics of Aluminium Strontium Alloys. Zeitschrift fur Metallkunde, 82 (9). pp. 675-683. Srikanth, S and Jacob, K T (1991) Thermodynamics of Aluminium-Barium Alloys. Metallurgical and Materials Transactions, 22 (5). pp. 606-616. Srikanth, S and Jacob, K T (1991) Vapor-Pressure of Calcium Corresponding to the Reduction of Calcia by Aluminium. Transactions of the Indian Institute of Metals, 44 (5). pp. 369-373. Srikanth, S and Jacob, K T (1988) Volume Effects and Associations in Liquid Alloys. Metallurgical and Materials Transaction B, 19 (3). pp. 465-470. Srikanth, S and Jacob, K T and Abraham, K P (1989) Representation of Thermodynamic Proprerties of Dilute Multi-Component Solutions-- Options and Constraints. Steel Research, 60 (1). pp. 6-11. Srikanth, S and Jacob, K T and Iyengar, G N K (1990) Phase Equilibria in the Co-Ni-F System and Activities in (CoXNi1-X)F2 Solid solutions at 1373 K. High Temperature Science, 30 (1). pp. 11-18. Srikanth, S and Petric, A (1994) Optimization and calculation of the Fe-Ta phase diagram. Journal of Alloys and Compounds, 203 . pp. 281-288. Srikanth, S and Srinivasan, V S and Jacob, K T and Allibert , M (1991) Alloy-oxide Equilibria in the System Ca-AI-O at 1373-K. Revenue Internationale des Hautes Temperatures et des Refractaires, 27 (3). pp. 131-139. Srikanth , S and Jacob, K T (1989) A Modified Least Squares Algorithm to Treat Associations in Liquid Alloys. Calphad, 13 (2). pp. 149-158. Srikrishna, T L and Bhatnagar, P P (1963) Production of high carbon ferro-chrome. NML Technical Journal, 5 (4). pp. 17-21. Srinivasan, N and Tendolkar, G S (1960) Proposed Pilot Plant for Production of Sintered Beryllium Oxide from Berylore. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Srinivasan, N and Cook, Albert R (1969) New finishes for Zinc alloys. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-10. Srinivasan, N and Cook, Albert R (1968) New Finishes for Zinc Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Srinivasan, S R and Bhatnagar, P P (1971) Fluidized bed roasting of zinc sulphide concentrates-some equilibrium considerations. NML Technical Journal, 13 (2). pp. 42-48. Srinivasan, S R and Singh, Gurdial and Kar, B C (1959) Battery crucibles for use in high frequency induction furnace. NML Technical Journal, 1 (3). pp. 33-36. Srivastava, A K and Srivastava, V C and Gloter, A and Ojha, S N (2006) Microstructural features induced by spray processing and hot extrusion of an Al–18% Si–5% Fe–1.5% Cu alloy. Acta Materialia, 54 (7). pp. 1741-1748. Srivastava, R K (1968) Aluminium Die Castings in Automibiles. In: Symposium on Non-ferrous Metals Technology: Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR), Jamshedpur. Srivastava, R K (1968) Aluminium die castings in Automobiles. In: Symposuim on Non-ferrous Metals Technology. NML Jamshedpur, Jamshedpur, pp. 73-74. Srivastava, S C and Ghosh, N and Pandey, L P (1993) An approach to the multi element analysis of sea-nodules. NML Technical Journal, 35 (3-4). pp. 45-54. Srivastava, S C and Godiwalla, K M and Das, A N and Pandey, L P (1994) Recovery of copper and zinc from scrap leaded brass. NML Technical Journal, 36 (1). pp. 11-17. Srivastava, S C and Pandey, L P (1994) Auger electron spectroscopy in metallurgical research. NML Technical Journal, 36 (4). pp. 125-143. Srivastava, S C and Subhashini, B (1975) A note on the analysis of nickel in the nickel complex with the help of x-ray fluorescence. NML Technical Journal, 17 (2). pp. 21-22. Srivastava, V C and Mandal, R K and Ojha, S N and Venkateswarlu, K (2007) Microstructural modifications induced during spray deposition of Al–Si–Fe alloys and their mechanical properties. Materials Science and Engineering A, 471 (1-2). pp. 38-49. Subrahmanyam, N and Ganguly, R G and Subramanian, M (1973) Solid state nitrogenation of carbon-free ferro-chromium. NML Technical Journal, 15 (1). pp. 10-16. Subramania, A and Angayarkanni, N and Sathiyapriya, A R and Vasudevan, T (2005) Synthesis and electrochemical characterization of nano-crystalline LiCoO2 powder by a novel sol-gel thermolysis process for Li-ion batteries. Journal of Metallurgy and Materials Science, 47 (1). pp. 85-90. Subramanian, C and Suri, A K (1998) Recovery of Niobium and Tantalum from Low Grade Tin Slag - A Hydrometallurgical Approach. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 100-107. ISBN 81-87053-28-7 Subramanian, M and Misra, R N and Bhatnagar, P P and Nijhawan, B R (1966) Economic utilization, recovery and substitution of some strategic non-ferrous metals. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Subramanian, S and Chockalingam, Evvie and Braun, J J (2010) Studies on acid production potential of mine tailings and bioremediation of acid mine water from an abandoned indian copper mine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Subramanian, S and Lahiri, A K (1996) Green processes in process metallurgy. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 22-29. Subramanian, S and Lahiri, A K (1998) Process Engineering for Pollution Control and Waste Minimisation in Non -Ferrous Metallurgical Industries. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 17-26. ISBN 81-87053-28-7 Suleimenov, E N and Mahato, M M (2010) Changes in melted slag structure with their temperature change. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Suleimenov, E N and Mahato, M M (2010) Melted slag and electric current. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sundaracharlu, R (1958) A Consumers Appreciation of the Symposium. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Suri, A K and Gupta, C K (1997) Production of Ferromolybdenum from Indian Resources. In: Proceedings of the National Workshop on Ferro Alloy Industries in the Liberalised Economy. NML, Jamshedpur, India, Jamshedpur, pp. 71-82. ISBN 81-87053-27-5 Surkov, G and Golovko, A K and Lomovsky, O I and Lobanov, J S (2011) Mechanochemical conversion of acetylene in quartz – ultrafine metal powder system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Sutton, C R and Geiger, G F (1958) Heat and Corrosion-Resistant Alloy Castings of the United States of America. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Chattoraj, I (2009) Failure analysis of air pre-heater tubes of a petrochemicals plant. Engineering Failure Analysis, 16 (7). pp. 2371-2381. Swarup, D and Bashforth, G Reginald (1960) The Relation of Pilot Plants to Full Scale Operation. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. ŠŠepelák, V and Bergmann, I and Indris, S and Heitjans, P and Becker, K D (2011) Crystallite size dependent cation distribution in nanostructured spinels studied by nmr, mössbauer spectroscopy and XPS. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. TTamaki, Kiheji (1964) New method for treatment of waste pickling acid. NML Technical Journal, 6 (1). pp. 45-49. Tamhane, S M and Manthapurwar, N S and Hasan, M Z and Aggarwal, A L (1996) Technology Options for Mitigation of Foundry Emissions. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 113-124. Tandon, D S and Basu, B B (1969) High speed chromium plating. NML Technical Journal, 11 (2). p. 21. Tandon, D S and Gupta, J R (1961) Non-metallic inclusions-their quantitative extraction from Steel. NML Technical Journal, 3 (3). pp. 20-24. Tarafder, Mita and Ranganath, V R and Tarafder, S and Ghosh, R N (1995) Fatigue life prediction software for engineering components. NML Technical Journal, 37 (2). pp. 43-52. Tarafder, Mita and Tarafder, S and Ranganath, V R (1997) Location independent CCL relations for standard fracture mechanics specimens. International Journal of Fatigue, 19 (8-9). pp. 635-640. Tarafder, Mita and Tarafder, S and Ranganath, V R and Ghosh, R N (1997) Finite element solutions for stress intensity factors in longitudinally cracked cylindrical components. International Journal of Pressure Vessels and Piping, 70 (2). pp. 127-133. Tarafder, S (2001) Fracture mechanisms and the quantification of fracture resistance. In: Recent trends in structural integrity assessment: Proceedings of workshop, Jan 18-19, 2001. NML, Jamshedpur, pp. 105-129. ISBN 81-87053-62-3 Tarafder, S and Ranganath, V R and Tarafder, Mita (1994) Development of fracture mechanics expression by finite element analysis. NML Technical Journal, 36 (4). pp. 145-155. Tarafder, S and Sivaprasad, S and Ray, K K (2007) Ductile fracture behaviour of primary heat transport piping material. Materials Science and Technology, 23 (11). pp. 1285-1293. Tavazzi, F (1959) Ten Years of Experience in Executives Training for a Large Group of Iron and Steel Companies. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Tcherdyntsev, V V and Kaloshkin, S D and Sudarchikov, V A and Dorofeev, A A and Mochkina, I V and Yuryeva, N V and Danilov, V D (2011) Ball milling effect on the properties of ultra high molecular weight Polyethylene - bronze composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Tcherdyntsev, V V and Shevchukov, A P and Sviridova, T A and Kaloshkin, S D (2011) Phase transformations in mechanically alloyed Al-Cu-Cr powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Tcherdyntsev, V V and Titova, V Yu and Kaloshkin, S D and Baldokhin, Yu V and Zagainov, A V and Rodin, A O (2011) Structure and magnetic properties of mechanically alloyed Fe3-xAlCrx powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Ter haar, L W (1960) Production of Reducing Gases from Petroleum Products by the Shell Gasification Process. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Teremova, M I and Petrakovskaya, E A and Romanchenko, A S and Tuzikov, F V and Gurevich, Yu L and Tsibina, O V and Yakubailik, E K and Abhilash, (2011) Iron-based ultrafine particles made in mode solutions and industrial waste waters. In: The thrid International Congress on Non-Ferrous Metals, September 7-9, 2011, Hrasnoyarsk, Russia. Tewari, C R and Prakash, Ved (1969) Phase changes in Mn1.11 Al 0.89 alloy and their effects on magnetic properties. NML Technical Journal, 11 (3). pp. 18-20. Tewari, J P and Singh, S K and Premchand, (1995) Preparation of electroless copper-graphite composite powder for application in avionics industries. NML Technical Journal, 37 (1). pp. 1-11. Tewari, J P and Upadhyaya, G S (1974) Powder metallurgical aspects of alloy steels. NML Technical Journal, 16 (1-2). pp. 20-22. Tewari, P and Bhatnagar, S S and Nijhawan, B R (1966) Theoretical considerations for substitutions in alloy steels. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Thakur, U P (2002) Emerging Character of Metallic Materials. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Thilakan, H R and Lahiri, A K and Banerjee, T (1967) Studies on the resistance and alloy steels against oil-ash. NML Technical Journal, 9 (2). pp. 20-25. Thilakan, H R and Lahiri, A K and Banerjee, T (1969) Studies on the resistance of alloy steels against oil-ash corrosion-Part II. NML Technical Journal, 11 (1). pp. 12-16. Thirugnanam, A and Chakravarthi, N. Veera and Chakkingal, Uday and Kumar, T S Sampath (2011) Novel titanium - hydroxyapatite biocomposites By mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME2008), 1-4 December, 2008, CSIR-NML, Jamshedpur. Thriveni, Thenepalli and Ryu, Miyoung and Kim, Hwan and Han, GI-Chun and Ahn, Ji-Whan (2010) Aragonite precipitated calcium carbonate : A new kind of functional filler. Journal of Metallurgy and Materials Science, 52 (4). pp. 279-303. Tiwary, S K (1981) Dephosphorisation of hot metal-A review. NML Technical Journal, 23 (3-4). pp. 37-42. Tiwary, S K and Gupte, P K (1970) Hardening of silicon spring steel. NML Technical Journal, 12 (1). pp. 1-4. To Duy, Ca (1999) Influence of Rare Earth Metals on the Nucleation and Precipitation of Slag Inclusions during Solidification of Molten Steel. PhD thesis, National Metallurgical Laboratory (NML). To Duy, Ca and Lee, Z H (2004) Influence of rare earth metals on non-metallic inclusion in 25cr-7Ni-3Mo-0.25N duplex stainless steel. Journal of Metallurgy and Materials Science, 46 (3). pp. 135-146. To Duy, Ca and Lee, Z H and Park, Y H and Shin, J S (2003) Effect of Lathanium on thermodynamics of sulphides formation in molten steel. Journal of Metallurgy and Materials Science, 45 (2). pp. 85-90. Tomotia, S K (2002) Aluminium and Its Usage. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Totlani, M and Balachandra, J (1969) Studies in leaching of Sulphide concentrates of copper and Nickel from Indigenous Source. In: Symposium on Non-ferrous Metals Technology. NML Jamshedpur, Jamshedpur, pp. 23-26. Totlani, M and Balachandra, J (1968) Studies in Leaching of Sulphide Concentrates of Copper and Nickel from Indigenous Source. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Tran, Chi Dac and Lee, Jae-chun and Pandey, B D and Jeong, Jinki and Yoo, Kyoungkeun and Huyunh, Trung Hai (2011) Bacterial Cyanide Generation in Presence of Metal Ions (Na+, Mg2+, Fe2+, Pb2+) and Gold Bioleaching from Waste PCBs. Journal of Chemical Engineering of Japan, 44 (10). pp. 692-700. Trehan, Y N (1967) Ageing of characteristics of some Al-Zn-Mg alloy. NML Technical Journal, 9 (3). pp. 4-7. Trehan, Y N (1968) Diffusion in evaporated films of magnesium-aluminium. In: symposium on Non-ferrous Metals Techonology. NML Jamshedpur, Jamshedpur, pp. 148-154. Trehan, Y N (1968) Diffusion in Evaporated Films of Magnesium-Aluminium. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Trehan, Y N (1967) Epitaxial growth of thin oxide and sulphide films on copper. NML Technical Journal, 9 (1). pp. 9-15. Trehan, Y N (1968) Thermal expansion characteristics of some Fe-Cr-Mn-N alloys. NML Technical Journal, 10 (2). pp. 31-34. Trehan, Y N and Bhadra, S P (1961) Recent Advances in the Technology of Aluminium- Magnesium Alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Trehan, Y N and Bhadra, S P and Gupte, P K (1960) Electrolytic polishing of stainless steels. NML Technical Journal, 2 (2). pp. 8-17. Trehan, Y N and Gupte, P K and Nijhawan, B R (1961) The Effect of Misch Metal Additions on the Structure and Workability of Al-Mg (7-100/.) Alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Trehan, Y N and Sharma, T L (1972) The electrolytic polishing of aluminium and aluminium alloys in a universal perchloric acid-bath. NML Technical Journal, 14 (3). pp. 119-126. Trentini, B and Allard, M (1959) Steelmaking by Injection of Oxygen and Lime Powder Irsid-O .L.P. Process. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Trentini, B and Allard, M (1959) Steelmaking by Injection of Oxygen and Lime Powder Irsid-O.L.P. Process. NML Technical Journal, 1 (1). pp. 115-120. Tripathi, Abhishek and Kumar, Manoj and Agrawal, A and Sau, D C and Chakravarty, Sanchita and Mankhand, T R (2011) Leaching of Gold from the Waste Mobile Phone Printed Circuit Boards (PCBS) with Ammonium Thiosulphate. In: 15th International Conference on Nonferrous Metals 2011, 8-9 July 2011, Kolkata,India. Tripathy, A K and Koria, S C and Saxena, M N (1973) Preparation of Pre-Reduced Briquettes and Studies on the Kinetics of the Process Under Reduced Pressure. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Tripathy, D A (1999) Ash management plan of CESC Ltd An overview. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Tripathy, P K and Shah, V D and Rakhasia, R H and Sehra, J C (1998) Environmental considerations in the selection of metallurgical processes for the extraction of molybdenum from low grade molybdenite concentrate. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 92-99. ISBN 81-87053-28-7 Tsun, Ko (1953) The Overheating & Burning of Steel. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Turianicová, Erika and Baláž, Peter (2011) A possible way to storage carbon dioxide on mechanically activated olivine (Mg,Fe)2SiO4. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. UUdaya Bhaskar, K and Govindarajan, B and Rao, K K and Barnwal, J P and Venugopal, R and Jakhu, M R and Rao, T C (2001) Graphite rejection in a lead concentrate using gravity concentration techniques. Journal of Metallurgy and materials Science, 43 (1). pp. 25-31. Udaya Bhaskar, K and Ramakrishnan, N (2002) Computational methods for analyses in mineral processing. Journal of Metallurgy and materials Science, 44 (2). pp. 81-89. Umadevi, T and Ponnusamy, V (2008) Effects of DC voltages using HCI, H2SO4 acids on polyaniline synthesised electrochemically. Journal of Metallurgy and Materials Science, 50 (1). pp. 45-52. Upadhyay, A K and Gupta, K K and Sircar, J K and Deb, M K and Mundhara, G L (2007) Dominance of lithogenic effect for nickel, cobalt, chromium and mercury as found in freshly deposited sediments of the river Subernarekha, India. Environmental Geology, 51 (8). pp. 1447-1453. Upadhyay, A K and Gupta, K K and Sircar, J K and Deb, M K and Mundhara, G L (2006) Heavy metals in freshly deposited sediments of the river Subernarekha, India: an example of lithogenic and anthropogenic effects. Environmental Geology, 50 (3). pp. 397-403. Upadhyay, Divyesh (2011) Microstructural analysis of 7075-Aluminium alloy. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted) Upadhyay, Rajendra Kumar and Venkatesh, Akella Satya and Roy, Subrata (2010) Mineralogical Characteristics of Iron Ores in Joda and Khondbond Areas in Eastern India with Implications on Beneficiation. Resource Geology, 60 (2). pp. 203-211. VVaidyanath, L R (1968) The Manufacture of Aluminium Bronze. In: Symposium on Non-ferrous Metals Technology : Paper for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Vaidyanath, L R (1969) The manufacture of Aluminium-bronze castings. In: Symposium on Non-ferrous Metals Technology. NML, Jamshedpur, Jamshedpur, pp. 72-85. Vaidyanath, L R and Smith, M J (1966) A study of copper consumption in some industrial countries and its relevance to India. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Vaish, A K (1987) Conspectus of gas-solid fluidization. NML Technical Journal, 29 (1-4). pp. 9-13. Vaish, A K and Biswas, P K and Chaudhuri, S P and Humane, M M and Minj, R K and Lakra, B A and Sinhababu, S K and De, P K and Goswami, N G and Sivaramakrishnan, C S and Ramachandrarao, P (2002) Iron making in ancient India - a critical assessment. In: Traditional and innovation in the history of iron making: an Indo European perspective. PAHAR, Nainital, pp. 237-249. ISBN 81-86246-19-3 Vaish, A K and Ganguly, R G and Mathur, S B (1997) Alternate Reductants to Charcoal for the Production of Standard Grade Ferro-Silicon. In: Proceedings of the National Workshop on Ferro Alloy Industries in the Liberalised Economy. NML, Jamshedpur, India, Jamshedpur, pp. 59-65. ISBN 81-87053-27-5 Vaish, A K and Goswami, M C and Biswas, P K and Humane, M M and Ramachandrarao, P (2004) Thermodynamic and Kinetic Aspects of Ancient Iron Making Technology in India. Journal of Rural Technology, 1 (4). pp. 156-162. Vaish, A K and Humane, M M and Chakrabarty, A K and Ramachandrarao, P (1998) Direct current transferred arc plasma reactor-Its suitability for smelting reduction and refining processes. NML Technical Journal, 40 (3). pp. 95-108. Vaish, A K and Humane, M M and Deshmukh, M R and Karyakarte, P P (2002) Environmental Management for Sustainable Growth in an Integrated Iron and Steel Plant. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Vaish, A K and Mahanty, M S and Saha, A K and Mathur, S B (1986) Calcium-silicide is a powerful deoxidiser. NML Technical Journal, 28 (1-4). pp. 18-25. Vaish, A K and Mahanty, M S and Saha, A K and Mathur, S B and Bodas, M G and Kumar, Vinay and Jana, R K and Khan, Z H and Akerkar, D D (1988) Pilot scale production of ferro-silicon through electro-thermal smelting. NML Technical Journal, 30 (1-4). pp. 6-12. Vaish, A K and Mahanty, M S and Saha, A K and Mathur, S B and Bodas, M G and Kumar, Vinay and Jana, R K and Khan, Z H and Bagchi, D and Nayak, A K and Akerkar, D D (1986) Production of multi-grade calcium silicide by quick lime method. NML Technical Journal, 28 (1-4). pp. 18-25. Vaish, A K and Mathur, S B and Ganguly, R G (1997) Economic Liberalization - A Stumbling Block in the Commercialization of Indigenous Calcium Silicide Technology. In: Proceedings of the National Workshop on Ferro Alloy Industries in the Liberalised Economy. NML, Jamshedpur, India, Jamshedpur, pp. 130-138. ISBN 81-87053-27-5 Vaish, A K and Minj, R K and Gupta, R N and Konar, J (2008) Kinetics and mechanism of multi-metallic magnetite ore reduction from liquid slags by solid carbon and carbon-saturated iron. Journal of Metallurgy and Materials Science, 50 (2). pp. 65-83. Vaish, A K and Singh, S D (2011) Development of Eco-friendly process for the recovery of Lead from lead battery scrap in small scale sector. The Banaras Metallurgist, 16 ( ). pp. 149-157. Vaish, A K and Singh, S D and Gupta, K N (1994) Potentialities of Alternative Charge Materials for the Electric Arc Furnace. In: Proceedings of the Workshop on Alternative Charge Materials for Electric Arc & Induction furnaces. NML Jamshedpur, Jamshedpur, pp. 97-105. Vaish, A K and Singh, S D and Minj, R K and Chishi, H K and Gupta, R C (2010) Prospects of Nickel—Chromium—Cobalt Bearing Magnetite Ore Deposit of Nagaland. IIM Metal News, 13 (4). pp. 17-22. Vaish, A K and Singh, S D and Minj, R K and Konar, J and Premchand, and Gupta, R C (2009) Prospects of smelting reduction of nickel - chromium - cobalt bearing magnetite deposit of Nagaland State for value added products. Journal of Metallurgy and Materials Science, 51 (4). pp. 247-258. Vala, Urvesh (2002) Effect of Lead on Hot Dip Galvanized Steel as Barrier/Sacrificial Coating. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Vapnik, Yevgeny and Bushmin, Sergey and Chattopadhyay, A and Dobrovolsky, D D (2007) Fluid inclusion and mineralogical study of vein-type apatite ores in shear zones from the Singhbhum metallogenetic province, West Bengal, India. Ore Geology Reviews, 32 (1-2). pp. 412-430. Varshney, R P (1994) Metallics for Induction Steel Melting Furnace. In: Proceedings of the Workshop on Alternative Charge Materials for Electric Arc & Induction furnaces. NML Jamshedpur, Jamshedpur, pp. 22-30. Vasudevarao, P V and Vijayavalli, R and Udupa, H V K (1968) Recovery of Certain Non-ferrous Metals from Industrial by Products. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Vasudevarao, P V and Vijayavalli, R and Udupa, H V K (1969) Recovery of certain non-ferrous metals from Industrial by-products. In: Symposium on Non-ferrous Metals Technology. Symposium Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-6. Vatchagandhy, J S (1958) An Exposition of Alloy Steels for the Engineer. In: Symposium on Production, Properties & Applications of Alloy & Special steels, Feb. 1-4, 1956, NML, Jamshedpur. Venkateswarlu, G and Shetty, K K (1969) Development of electrical insulating surface on copper-nickel alloy wire used in naval instruments. In: Symposium on Non-ferrous Metals Technology. NML, Jamshedpur, Jamshedpur, pp. 118-122. Venkateswarlu, K (1997) Influence of SiC reinforcement on the abrasive wear response of an Al-Cu alloy under conditions of varying abrasive size and applied load. Material Science letters, 16 . pp. 1113-1115. Venkateswarlu, K (1996) Influence of the size and morphology of silicon particles on the physical, mechanical and tribological properties of some aluminium - silicon alloys. Material Science letters, 15 . pp. 1773-1776. Venkateswarlu, K and Das, Goutam and Pramanick, A K and Xu, Cheng and Langdon, T G (2006) Using ball-indentation to evaluate the properties of an ultrafine-grained Al–2% Si alloy processed by ECAP. Materials Science and Engineering A, 427 (1-2). pp. 188-194. Venkateswarlu, K and De, P K and Das, S K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2002) Thermo-mechanical treatment of AI-5Ti-lB and AI-5Ti master alloy on its grain refining performance on aluminium. Journal of Metallurgy and materials Science., 44 (3). pp. 109-125. Venkateswarlu, K and De, P K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2004) Effect of rolling on AI-5Ti binary master alloy(sponge route) and its grain refining performance in aluminium. Journal of Metallurgy and materials Science, 46 (2). pp. 107-113. Venkateswarlu, K and Rajinikanth, V and Sirkar, M K and Atiquzzaman, and Sinha, Dhiraj Prasad and Das, S K (2008) High stress abrasive wear behavior of coal mill liner materials - A model based factorial design. Journal of Metallurgy and Materials Science, 50 (3). pp. 151-166. Venkateswarlu, K and Shetty, K K (1968) Development of Electrical Insulating Surface on Copper-Nickel Alloy Wire used in Naval Instruments. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Venugopal, R (2010) Solid waste processing for industrial utilization— a few case studies. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Venugopalan, T and Palit Sagar, S (2011) Need of Improved Non-Destructive Technique for the Surface Condition Monitoring of High Speed Steel (HSS) Work Rolls. In: NDESAI-2011, December 2-3, 2011, Tata Steel, Jamshedpur, India. Verma, A K and Sharma, S and Ghosh, K S (1996) Ceramics for Automobile Industries. NML Technical Journal, 38 (2). pp. 63-72. Verma, M N P and Dutt, Ashimesh and Rao, G N and Kumar, Rajendra (1975) Manufacture of soil pipe castings to export specification. NML Technical Journal, 17 (1-2). pp. 15-20. Verma, M R (1957) Complexing of Metallic Ions with Organic Acids & Their Applications To Analytical Problems. In: Non-Ferrous Metal Industry in India. NML, Jamshedpur, India, Jamshedpur, pp. 250-255. Vishwakarma, U K and Bose , P K and Khowala, R C (1994) Case Study on a New Alternate Charge Material for Electric Arc Furnace. In: Proceedings of the Workshop on Alternative Charge Materials for Electric Arc & Induction furnaces. NML Jamshedpur, Jamshedpur, pp. 125-134. Vishwanathan, P V and Gangadharan, T K (1996) Environmental and Waste Management in Iron and Steel Industry. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 199-207. Visnyovszky, L (1973) Solid Carbon - The Most Effective Reducing Agent. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Viswanathan, K V and Majumdar, K K (1972) Adsorption of cresols on molybdenite. NML Technical Journal, 14 (2). pp. 63-66. Viswanathan, M (1998) Integrated Pollution Control and Waste Management in Copper Base Processing Industries. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 67-78. ISBN 81-87053-28-7 Viswanathan, P V and Yadavalli, B V S and Srinivasan, S R and Bhatnagar, P P (1968) Metallurgy of Complex Pb, Cu and Zinc Sulfides. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Viswanathan, P V and Yedavalli, B V S and Srinivasan, S R and Bhatnagar, P P (1969) Treatment of Complex lead, Copper and Zinc sulfides. In: Symposium on Non-ferrous Metals Technology. NML Jamshedpur, Jamshedpur, pp. 27-40. Voice, E W (1960) The Uses and Limitations of Pilot Plants in Studying Iron Making Problems. NML Technical Journal, 2 (1). pp. 24-26. WWada, K and Honda, A (1960) Experiments on Blast Furnace Operation in Yawata Iron and Steel Works. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Wada, Kamekichi (1959) Recent Trends in Iron and Steel Making in Japan. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Wadia, N J and Prasad, A S (1966) The properties of some substitute bearing alloys. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Wallace coffer, L (1968) Extractive Metallurgical Processes Possibly Applicable in India. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Wanderka, N and Radiguet, B and Sahoo, K L and Banhart, J (2007) Crystallization Behavior of Al87Ni5La7Zr1 Metallic Glass. Materials Science Forum, 539-543 . pp. 1917-1920. Wate, S R and Joshi, S R (1996) Strategies for mitigation of pollution and environmental management in metallurgical industries. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 38-44. Weldon, B A and Anant Narayan, S N (1969) Nickel in Non-ferrous General Engineering Alloys. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare Earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-8. Weldon, B A and Narayan, S. N. Anant (1968) Nickel in Non-ferrous General Engineering Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Welham, N J and Setoudeh, N (2011) Increasing gas sorption onto carbon by milling with alumina. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Wenzel, W and Meraikib, M and Speich, P and Franke, F H (1973) Reducing Agents from Brown Coal for the Production of Sponge Iron. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Whiting, A N (1959) Comparative Costs of Iron Pretreatment. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Whiting, A N and Raper, A G (1964) The new stora process for ironmaking. NML Technical Journal, 6 (1). pp. 35-41. Winterbottom, A B (1953) Cracking of Bucket Lugs in Pelton Turbines a Corrosion Fatigue Phenomenon. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Wood, J (1961) Effect of Composition and Thermal Treatment on the Natural Ageing of Aluminium -Zinc-Copper Alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Woodrow, P A (1976) The transfer of technology from R&D laboratory to industry. NML Technical Journal, 18 (3). pp. 42-46. YYadav, P N S (1995) The Polarisation behaviour of 3003 aluminium in some organic solvents. NML Technical Journal, 37 (3). pp. 89-94. Yadav, P N S (1998) A study of passive behaviour of aluminium electrode in ethylenediamine. NML Technical Journal, 40 (1). pp. 11-15. Yadav, P N S and Garg, S M (2000) Passivation behaviour of 1060 Al in aqueous ethylenediamine. Journal of Metallurgy and materials Science, 42 (1). pp. 43-46. Yadav, T P and Mukhopadhyay, N K and Tiwari, R S and Srivastava, O N (2011) Mechanically induced phase transformation in Al-Cu- Fe-Cr decagonal Quasicrystalline alloy by high-energy ball milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Yadav, U S and Das, B K and Kumar, Ashok and Sandhu, H S (2002) Solid Wastes Recyling through Sinter-Status at Tata Steel. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Yariv, S and Lapides, I and Abramova, E (2011) Mechanochemical reactions of clay minerals with CsCl. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India. Yedavalli, B V S (1973) Economic viability of bacterial leaching-A management research viewpoint. NML Technical Journal, 15 (4). pp. 28-31. Yedavalli, B V S and Saha, A K (1994) Recovery of copper and zinc from scrap leaded brass. NML Technical Journal, 36 (1). pp. 1-9. Yousef, A A and Boulos, T R and Saada, M Y (1969) Beneficiation of Some Egyptian Glass Sands. In: Symposium on Non-ferrous Metals Technology. Symposium on Non-ferrous Metals Technology, Volume III - Nickel, Lead, Zinc, Rare earth and Nuclear Metals . NML, Jamshedpur, Jamshedpur, pp. 1-7. Yousef, A A and Boulos, T R and Saada, M Y (1968) Beneficiation of some Egyptian Glass Sands. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. |
