Items where Subject is "Metallurgy > Properties of Metals"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: B | D | G | K | M | R | S | T
Number of items at this level: 19.

B

Bhattacharya, J and Das, B N (1970) Evaluation of manganese-copper-nickel alloys for use in thermobimetal. NML Technical Journal, 12 (1). pp. 9-11.

Bose, S C and Singh, Kulvir and Ray, Ashok K and Ghosh, R N (2008) Effect of thermal ageing on mechanical properties and microstructures of a standard G-X 12 CrMoVWNbN 1011 grade of cast steel for turbine casing. Materials Science and Engineering A, 476 (1-2). pp. 257-266.

D

Das, Arpan and Sivaprasad, S and Das, Swapan K and Tarafder, Mita and Tarafder, S (2012) Analysis of damage in high strength steels. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interactions (CF-6), 22-25 Jan 2012, Mamallapuram, India.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal (2006) Structure–property correlation of EN steel and evaluation of mechanical properties through BIT. NDT & E International, 39 (2). pp. 155-161.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal and Ghosh, R N (2005) Materials characterization and classification on the basis of materials pile-up surrounding the indentation. Materials Science and Engineering A, 408 (1-2). pp. 158-164.

Das Bakshi, Srimanta and Basu, Bikramjit and Mishra, Suman K (2006) Fretting wear properties of sinter-HIPed ZrO2–ZrB2 composites. Composites Part A Applied Science and Manufacturing, 37 (10). pp. 1652-1659.

Das Bakshi, Srimanta and Basu, Bikramjit and Mishra, Suman K (2006) Microstructure and mechanical properties of sinter-HIPed ZrO2–ZrB2 composites. Composites Part A Applied Science and Manufacturing, 37 (11). pp. 2128-2135.

Dey, A K and Poddar, Palash and Singh, K K and Sahoo, K L (2006) Mechanical and wear properties of rheocast and conventional gravity die cast A356 alloy. Materials Science and Engineering A, 435-436 . pp. 521-529.

G

Ghosh, Arindam and Das, S and Chatterjee, S and Ramachandrarao, P (2006) Effect of cooling rate on structure and properties of an ultra-low carbon HSLA-100 grade steel. Materials Characterization, 56 (1). pp. 59-65.

K

Kar, Abhijit and Ghosh, M and Ray, Ajoy K and Ghosh, R N (2007) Effect of copper addition on the microstructure and mechanical properties of lead free solder alloy. Materials Science and Engineering A, 459 (1-2). pp. 69-74.

M

Macgregor, R A (1953) Failures of Steel Parts in Service. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Effect of copper and nickel coating on short steel fiber reinforcement on microstructure and mechanical properties of aluminium matrix composites. Materials Science and Engineering A, 492 (1-2). pp. 346-352.

R

Ray, Ashok K and Tiwari, Y N and Sinha, S K and Singh, Raghubir and Chaudhuri, S (2002) Remnant life assessment of service-exposed pendent superheater tubes. Engineering Failure Analysis, 9 (1). pp. 83-92.

S

Sau, D C and Mohanty, Swati and Biswal, K C (2008) Critical fluidization velocities and maximum bed pressure drops of homogeneous binary mixture of irregular particles in gas–solid tapered fluidized beds. Powder Technology, 186 (3). pp. 241-246.

Singh, P K and Arora, Punit and Bhasin, V and Vaze, K K and Pukazhendi, D M and Gandhi, P and Raghava, G and Sivaprasad, S and Tarafder, S (2011) Fatigue studies on stainless steel piping materials and components: Indian AHWR. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India.

Srivastava, V C and Jindal, Vikas and Uhlenwinkel, V and Bauckhage, K (2008) Hot-deformation behaviour of spray-formed 2014 Al + SiCP metal matrix composites. Materials Science and Engineering A, 477 (1-2). pp. 86-95.

T

Tarafder, S and Gupta, K K (2004) Estimation of Uncertainty in Mechanical Testing. In: Refresher Course on ISO/IEC 17025 Standards, 27-28 Aug 2004, Kolkata.

Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2001) Specimen Size and Constraint Effects on J-R Curves of SA333 Gr.6 Steel. Sponsored (SSP). CSIR-NML, Jamshedpur, Jamshedpur.

Tarafder, S and Sivaprasad, S and Ranganath, V R (2007) Comparative assessment of fatigue and fracture behaviour of cast and forged railway wheels. Fatigue and Fracture of Engineering Materials and Structures, 30 (9). pp. 863-876.

This list was generated on Sat Dec 16 18:15:36 2017 IST.