Items where Subject is "Metallurgy > Metals Corrosion"

A

Al-Negheimish, Abdulaziz and Hussain, R R and Alhozaimy, Abdulrahman (2021) Corrosion performance of hot-dip galvanized zinc-aluminum coated steel rebars in comparison to the conventional pure zinc coated rebars in concrete environment. Construction and Building Materials, 274 . p. 121921.

Ananda Kumar, S and Shree Meenakshi, K and Sankara Narayanan, T S N and Srikanth, S (2008) Corrosion resistant behaviour of PANI–metal bilayer coatings. Progress in Organic Coatings, 62 (3). pp. 285-292.

B

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2003) Electroless Ni–P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.

Balusamy, T and Satendra, Kumar and Sankara Narayanan, T S N (2010) Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel. Corrosion Science, 52 . pp. 3826-3834.

Balusamy, T and Satendra , Kumar and Sankara Narayanan, T S N (2011) Electrochemical behaviour of surface modified AISI 304 grade stainless steel in ringer’s solution. Transactions of the Indian Institute of Metals, 64 (4-5). pp. 507-511.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Comparative Studies on Al-Based Composite Powder Reinforced with Nano Garnet and Multi-wall Carbon Nanotubes. Journal of Materials Engineering and Performance, 24(11) (IF-0.998). pp. 4200-4205.

Baskaran, Irusen and Sankara Narayanan, T S N and Seshadri, S K (2001) Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy. Journal of Solid State Electrochemistry, 5 (5). pp. 334-338.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2009) Corrosion resistance of electroless Ni–low B coatings. Transactions of the Institute of Metal Finishing, 87 (4). pp. 221-224.

Bhattamishra, A K and Mishra, G S and Banerjee, M K (1991) Influence of silicon/iron ratio on corrosion behaviour of aluminium-silicon alloys in inorganic and organic acids. Anti-Corrosion Methods and Materials, 38 (2). pp. 4-13.

C

Chatterjee, P and Singh, D D N (1991) H2S Corrosion control of steel by using pyridine compounds. Anti-Corrosion Methods and Materials, 38 (1). pp. 4-10.

Chattoraj, I (2007) Fundamentals of corrosion and its prevention. In: UNSPECIFIED.

D

Das, Swapan K and Bhattacharya, D K (2003) Corrosion failure of Zn–Al detonator housing. Engineering Failure Analysis, 10 (6). pp. 639-643.

Dey, Swapna and Das, S K and Basumallick, A and Chattoraj, I (2010) The Effect of pitting on fatigue lives of peak-aged and overaged 7075 aluminum alloys. Metallurgical and Materials Transactions A , 41A . pp. 3297-3307.

Dey, Swapna and Mandhyan, A K and Sondhi, S K and Chattoraj, I (2006) Hydrogen entry into pipeline steel under freely corroding conditions in two corroding media. Corrosion Science, 48 (9). pp. 2676-2688.

H

Hussain, Raja Rizwan and Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Singh, D D N (2020) Corrosion characteristics of vanadium micro-alloyed steel reinforcement bars exposed in concrete environments and industrially polluted atmosphere. Cement and Concrete Composites, 113(4) .

J

Jegannathan, S and Arumugam, T K and Sankara Narayanan, T S N and Ravichandran, K (2009) Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: Cathodic vs. anodic. Progress in Organic Coatings, 65 (2). pp. 229-236.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Evaluation of the corrosion resistance of phosphate coatings obtained by anodic electrochemical treatment. Progress in Organic Coatings, 57 (4). pp. 392-399.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Formation of zinc phosphate coating by anodic electrochemical treatment. Surface and Coatings Technology, 200 (20-21). pp. 6014-6021.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Formation of zinc–zinc phosphate composite coatings by cathodic electrochemical treatment. Surface and Coatings Technology, 200 (12-13). pp. 4117-4126.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2005) Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests. Electrochimica Acta, 51 (2). pp. 247-256.

K

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) Anodic Dissolution Behaviour of Tungsten Carbide Scraps in Ammoniacal Media. Advanced Material Research, 828 (IF-). pp. 11-20.

Krishna, K Gopala and Sivaprasad, S and Sankara Narayanan, T S N and Kumar, K C Hari (2012) Localized corrosion of an ultrafine grained Al-4Zn-2Mg alloy produced by cryorolling. Corrosion Science, 60 . pp. 82-89.

Krishnaveni, K (2008) Studies on Ni-B and Ni-B-Si3N4 composite coatings obtained by electro- and electroless deposition processes. PhD thesis, University of Madras .

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Corrosion resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Alloys and Compounds, 480 (2). pp. 765-770.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2008) Electrodeposited Ni–B–Si3N4 composite coating: Preparation and evaluation of its characteristic properties. Journal of Alloys and Compounds, 466 (1-2). pp. 412-420.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2012) Electroless Ni-B-Si3N4 composite coating: deposition and evaluation of its characteristics properties. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42(7) . pp. 920-927.

M

Mahato, R Raman and Bhattamishra, A K and Singh, R and Jayakrishnan, P (2001) Corrosion behaviour of painted HSLA panels in chloride environment – a comparative study of different paints. Anti-Corrosion Methods and Materials, 48 (3). pp. 188-194.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801.

Mandhyan, A K (2007) Corrosion of metals and its prevention. In: Training programme on industrial corrosion: evaluation and mitigation,, 5-7 December 2007, CSIR-NML.

Mitra, M S and Vaidyanath, L R (1951) The Influence of Wear-product in Accelerating Wear. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Sinha, R K and Bhattacharya, D K and Chaudhuri, S (1999) Remaining life estimation of a service exposed economiser tube. Engineering Failure Analysis, 6 (4). pp. 233-243.

Munda , Parikshit and Das, Swapan K and Ghosh Chowdhury, S and Das, Goutam and Singh, S R (2010) Investigation on the Failure of Gear Pump. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

N

Narang, S K and Mukherjee, A N (1999) Cathodic protection: introduction and recent developments. In: The 111th Asian-Pacific corrosion control conference, 1999, Vietnam.

P

Parida, N (2007) NDE techniques for corrosion monitoring in industrial systems. In: UNSPECIFIED.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2006) Effect of fretting amplitude and frequency on the fretting corrosion behaviour of tin plated contacts. Surface and Coatings Technology, 201 (6). pp. 2181-2192.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Effect of temperature on the fretting corrosion of tin plated copper alloy contacts. Wear, 262 (3-4). pp. 320-330.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2008) Fretting corrosion of tin-plated contacts. Tribology International, 41 (7). pp. 616-628.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Fretting corrosion of tin-plated contacts: Evaluation of surface characteristics. Tribology International, 40 (3). pp. 548-559.

R

Rao, G S and Yagodzinskyy, Y and Que, Z and Spatig, P and Seifert, H-P (2021) Study on hydrogen embrittlement and dynamic strain ageing on low-alloy reactor pressure vessel steels. Journal of Nuclear Materials, 556 .

Ravi Kumar, B and Singh, Raghuvir and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2005) Effect of texture on corrosion behavior of AISI 304L stainless steel. Materials Characterization, 54 (2). pp. 141-147.

Ravichandran, K and Sivanandh, H and Sundara Raman, Ganesh and Hariharasudan, T and Sankara Narayanan, T S N (2000) Acceleration of the phosphating process—the utility of galvanic coupling. Metal Finishing, 98 (9). pp. 48-54.

S

Sahoo, Biraj K and Deva, Anjana and Pandey, Pratiksha and Meena, L K and Ghosh Chowdhury, S and Jha, Bimal Kumar (2020) Microstructure–Property Correlation in High-Strength Formable Steel with Varying Nb-Si Content. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 1901-1908.

Sankara Narayanan, T S N (2010) Corrosion Science and Engineering. [Presentation Slide] (Unpublished)

Sankara Narayanan, T S N (2005) Surface pretretament by phosphate conversion coatings - A review. Reviews in Advanced Materials Science, 9 . pp. 130-177.

Sankara Narayanan, T S N and Baskaran, Irusen and Krishnaveni, K and Parthiban, S (2006) Deposition of electroless Ni–P graded coatings and evaluation of their corrosion resistance. Surface and Coatings Technology, 200 (11). pp. 3438-3445.

Sankara Narayanan, T S N and Jegannathan, S and Ravichandran, K (2006) Corrosion resistance of phosphate coatings obtained by cathodic electrochemical treatment: Role of anode–graphite versus steel. Progress in Organic Coatings, 55 (4). pp. 355-362.

Sankara Narayanan, T S N and Krishnaveni, K and Seshadri, S K (2003) Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Materials Chemistry and Physics, 82 (3). pp. 771-779.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Evaluation of the performance of electroless Ni-B coated brass contacts under fretting conditions. Surface Review and Letters (srl), 15 (4). pp. 443-452.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Fretting corrosion of lubricated tin plated copper alloy contacts: Effect of temperature. Tribology International, 41 (2). pp. 87-102.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Fretting corrosion of lubricated tin-plated contacts. Industrial Lubrication and Tribology, 60 (5). pp. 233-241.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2007) Fretting-corrosion mapping of tin-plated copper alloy contacts. Wear, 262 (1-2). pp. 228-233.

Sankara Narayanan, T S N and Satendra, Kumar (2011) Evaluation of corrosion performance of reinforcement steel. Sponsored (SSP). NML, Chennai Centre, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Studies on the Electrochemical Behaviour of Ti-Mo Alloys In Fluoride Medium to assess their Suitability for Dental Implant Applications (OLP-0073). Exploratory (OLP). NML, NML, Chennai Centre. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro - and electroless deposited composite coatings: preparation, characteristics and applications. In: Encyclopedia of composites. Wiley, Hoboken, N J.

Sankara Narayanan, T S N and Seshadri, S K (2004) Formation and characterization of borohydride reduced electroless nickel deposits. Journal of Alloys and Compounds, 365 (1-2). pp. 197-205.

Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.

Satendra, Kumar and Sankara Narayanan, T S N (2008) Corrosion behaviour of Ti–15Mo alloy for dental implant applications. Journal of Dentistry, 36 (7). pp. 500-507.

Satendra, Kumar and Sankara Narayanan, T S N (2009) Electrochemical characterization of Beta-Ti alloy in Ringer’s solution for implant application. Journal of Alloys and Compounds, 479 (1-2). pp. 699-703.

Satendra, Kumar and Sankara Narayanan, T S N (2011) Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium. Journal of Applied Electrochemistry, 41 . pp. 123-127.

Satendra, Kumar and Sankara Narayanan, T S N and Manimaran, A and Suresh Kumar, M (2007) Effect of lead content on the dezincification behaviour of leaded brass in neutral and acidified 3.5% NaCl solution. Materials Chemistry and Physics, 106 (1). pp. 134-141.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2009) Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time. Materials Science and Engineering C, 29 (6). pp. 1942-1949.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization. Materials Chemistry and Physics, 119 (1-2). pp. 337-346.

Satendra, Kumar and Sankara Narayanan, T S N and Suresh Kumar, M and Manimaran, A (2006) Dezincification of Brass in Sulfide Polluted Sodium Chloride Medium: Evaluation of the Effectiveness of 2-Mercaptobenzothiazole. International Journal of Electrochemical Science, 1 (8). pp. 456-469.

Singh, D D N (2007) Corrosion inhibitors. In: Training programme on industrial corrosion: evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 119-134.

Singh, D D N and Ghosh, Rita and Singh, B K (2002) Fluoride induced corrosion of steel rebars in contact with alkaline solutions, cement slurry and concrete mortars. Corrosion Science, 44 (8). pp. 1713-1735.

Singh, D D N and Singh, B K and Ghosh, Rita (2001) Reliable evaluation techniques for localized corrosion damages. In: Recent trends in structural integrity assessment: Proceedings of workshop, Jan 18-19, 2001, NML Jamshedpur, India.

Singh, D D N and Singh, T B and Gaur, B (1995) The role of metal cations in improving the inhibitive performance of hexamine on the corrosion of steel in hydrochloric acid solution. Corrosion Science, 37 (6). pp. 1005-1019.

Singh, D D N and Yadav, Shyamjeet and Saha, Jayant K (2008) Role of climatic conditions on corrosion characteristics of structural steels. Corrosion Science, 50 (1). pp. 93-110.

Singh, M N and Singh, Inder and Pandey, J L (1997) High temperature corrosion-resistant coating on steel for short-term application. Anti-Corrosion Methods and Materials, 44 (2). pp. 90-93.

Singh, Raghuvir (2007) Corrosion evaluation and monitoring practices. In: Training programme on industrial corrosion: evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 48-67.

Singh, Raghuvir and Dahotre, N B (2005) Tribology of laser modified surface of stainless steel in physiological solution. Journal of Materials Science, 40 . pp. 5619-5626.

Singh, Raghuvir and Das, Goutam and Suman, Satyarth and Singh, P K (2008) Response of Weld Joints in Stainless Steel 304LN Pipe to Low Temperature Sensitization. In: IIW- IC-2008 Chennai, 8-10 January, 2008, Chennai.

Singh, Raghuvir and Kurella, A and Dahotre, N B (2006) Laser Surface Modification of Ti–6Al–4V: Wear and Corrosion Characterization in Simulated Biofluid. Journal of Biomaterials Applications, 21 (1). pp. 49-73.

Sivaprasad, S and Tarafder, S (2007) Corrosion of stressed components. In: Training programme on industrial corrosion: Evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 68-91.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Tarafder, Mita and Ray, K K (2006) Corrosion fatigue crack growth behaviour of naval steels. Corrosion Science, 48 (8). pp. 1996-2013.

Srikanth, S and Sankara Narayanan, T S N and Gopalakrishna, K and Narasimhan, B R V (2005) Corrosion in a buried pressurised water pipeline. Engineering Failure Analysis, 12 (4). pp. 634-651.

T

Tarafder, S (2010) Technology for Engineering Critical Assessment: Project Completion Report. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)