Items where Subject is "Metallurgy > Waste Utilization"
Group by: Creators | Item Type
Number of items at this level: 54.
Abhilash, and Ghosh, Anirban and Pandey, B D (2015) Bioleaching of low grade granitic chalcopyrite ore by hyperthermophiles: Elucidation of kinetics-mechanism. Revue de Métallurgie, 112/5 (IF-0.176). pp. 1-14.
Abhilash, and Meshram, Pratima and Sarkar, Supriyo and Venugopalan, T (2017) Exploring Blast Furnace Slag As A Secondary Resource For Extraction Of Rare Earth Elements. Minerals & Metallurgical Processing Journal, 34(4) (IF-0.692). pp. 178-182.
Abhilash, and Pandey, B D and Ray, Lalithagauri (2011) Column bioleaching of apatite rich low grade Indian Uranium ore. In: 19th International Biohydrometallurgy Symposium, 18-22 September 2011, Changsha, China.
Abhilash, and Sinha, Shivendra and Meshram, Pratima and Pandey, B D and Behera, P K and Satapathy, B K (2014) RedMud: A Secondary Resource for Rare Earth Elements. In: International Bauxite, Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, India.
Agrawal, A and Kumari, S and Ray, B C and Sahu, K K (2007) Extraction of acid and iron values from sulphate waste pickle liquor of a steel industry by solvent extraction route. Hydrometallurgy, 88 (1-4). pp. 58-66.
Agrawal, A and Sahu, K K and Pandey, B D (2004) Solid waste management in non-ferrous industries in India. Resources, Conservation and Recycling, 42 (2). pp. 99-120.
Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2017) c. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151.
Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213.
Bhattacharya, Madhusmita (2011) Isolation and purification of bacteria from bauxite and iron ore mine samples. Masters thesis, National Metallurgical Laboratory (NML).
Dhal, B and Pandey, B D and Abhilash, (2018) Mechanism elucidation and adsorbent characterization for removal of Cr(VI) by native fungal adsorbent. Sustainable Environment Research, 28(6), November (IF-0.534). pp. 289-297.
Gurevich, Y L and Teremova, M I and Bondarenko, G N and Kislan, S L and Abhilash, (2015) Bio-chemical leaching of kaolinite-hematite-boehmite type bauxite ore. Indian Journal of Chemical Technology, 22/5 (IF-0.655). pp. 248-252.
Harsh Raj, and Jha, S K and Paswan, Dayanand (2016) Optimization of Process Parameter for Smelting and Reduction of Ferrochrome. International Journal of Engineering Research & Technology, 5(10) .
Jana, R K and Randhawa, N S and Agarwal, Sanjay (2008) Making standard grade FeSiMn alloy by blending of different low grade materials. In: National Metallurgist Day - Annual Technical Meeting (NMD-ATM), 12-15 November 2008, New Delhi.
Jana, R K and Randhawa, N S and Agarwal, Sanjay and Maity, S K and Ghorai, S (2008) Two stage smelting process for recovery of manganese from low manganese bearing material. In: 12th Int. Sem. Nonferrous Metals – 2008, 4-5 July, 2008, Nagpur.
Jana, R K and Randhawa, N S and Pal, J and Minj, R K and Godiwalla, K M (2005) Recovery of manganese as ferro-silico-manganese alloy from leached sea nodule residue. In: National Seminar on Polymetallic Nodule, 29-30th September 2005, Bhubaneswar.
Kalinkin, A M and Alex, T C and Nath, S K and Gurevich, B I and Kalinkina, E V and Tyukavkina, V V (2013) Geopolymers Based on Mechanically Activated Non-Ferrous Slags. Chemistry for Sustainable Development, 6 (IF-). pp. 647-655.
Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) Anodic Dissolution Behaviour of Tungsten Carbide Scraps in Ammoniacal Media. Advanced Material Research, 828 (IF-). pp. 11-20.
Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2007) Towards sustainable solutions for fly ash through mechanical activation. Resources, Conservation and Recycling, 52 (2). pp. 157-179.
Kumar, Rakesh and Srivastava, J P and Premchand, Premchand (1998) Utilization of iron values of red mud for metallurgical applications. In: Environmental and Waste Management (ISSN : 0971-9407). National Metallurgical Laboratory, Jamshedpur, India, Jamshedpur, India, pp. 108-119.
Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A (2006) Innovative methodologies for the utilisation of wastes from metallurgical and allied industries. Resources Conservation and Recycling, 48 (4). pp. 301-314.
Kumar, Sanjay and Sahoo, D P and Nath, S K and Alex, T C and Kumar, Rakesh (2012) From Grey Waste to Green Geopolymer. Science and Culture, 78(11-12) . pp. 511-516.
Meshram, Pratima and Kumari, Jyotsna and Abhilash, and Pandey, B D (2014) Extraction of V2O5 from Bayers Sludge - An Overview. In: Int Bauxite,Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, INDIA.
Meshram, Pratima and Pandey, B D and Abhilash, (2019) Perspective of availability and sustainable recycling prospects of metals in rechargeable batteries – A resource overview. Resources Policy, 60 . pp. 9-22.
Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Hydrometallurgical processing of spent lithium ion batteries (LIBs) in the presence of a reducing agent with emphasis on kinetics of leaching. Chemical Engineering Journal, 281 (IF-4.321). pp. 418-427.
Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Leaching of base metals from spent Ni–metal hydride batteries with emphasis on kinetics and characterization. Hydrometallurgy, 158 (1.933). pp. 172-179.
Meshram, Pratima and Pandey, B D and Mankhand, T R (2016) Process optimization and kinetics for leaching of rare earth metals from the spent Ni–metal hydride batteries. Waste Management, 51 (IF-4.030). pp. 196-203.
Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Recovery of valuable metals from cathodic active material of spent lithium ion batteries: Leaching and kinetic aspects. Waste Management, 45 (IF-3.220). pp. 306-313.
Mishra, D and Kanari, N and Sahu, K K and Gaballah, I (2008) Recovery of zinc and lead from electric arc furnace dusts through the oxy – chlorination route. Metal Materials & Processes, 20 (2). pp. 161-172.
Nath, S K and Kumar, Sanjay (2013) Inﬂuence of iron making slags on strength and microstructure of ﬂy ash geopolymer. Construction and Building Materials, 38 (IF-1.834). pp. 924-930.
Nath, S K and Maitra, S and Mukherjee, S and Kumar, Sanjay (2016) Microstructural and morphological evolution of fly ash based geopolymers. Construction and Building Materials, 111 (IF-3.169). pp. 758-765.
Nguyen, N V and Lee, Jae-chun and Jha, Manis K and Yoo, Kyoungkeun and Jeong, Jinki (2009) Copper recovery from low concentration waste solution using Dowex G-26 resin. Hydrometallurgy, 97 (3-4). pp. 237-242.
Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178.
Pal, J and Ghorai, S and Das, Avimanyu (2015) Development of carbon composite iron ore micropellets by using the microfines of iron ore and carbon-bearing materials in iron making. International Journal of Minerals, Metallurgy and Materials, 22 (IF-0.69). pp. 132-140.
Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D and Ghosh, Sukomal (2013) Development of fluxed micropellets for sintering utilising iron oxide waste fines. Ironmaking & Steelmaking, 40(7) (IF-0.454). pp. 498-504.
Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.
Pal, J and Venugopalan, T (2015) Carbon as in situ energy source in induration of hematite pellets and its effect on pellet properties. Ironmaking and Steelmaking, 42 (IF-0.553). pp. 139-147.
Paswan, Dayanand and Malathi, M and Minj, R K and Bandopadhyay, D (2015) Mill Scale: A Potential Raw Material for Iron and Steel Making. Steelworld , 21 . pp. 54-56.
Paswan, Dayanand and Minj, R K and Singh, S D and Vaish, A K and Ghorai, S and Malathi, M and Mehta, K D and Prasad, Sanjay and Venugopalan, T (2014) Exploitation of banded hematite quartzite and Jhama coal for the production of higher grade ferro-silicon. IIM Metal News, 17(4) . pp. 23-28.
Randhawa, N S and Das, N N and Jana, R K (2010) Sorption of cadmium ions from aqueous solution by manganese nodules leached residue. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2010, 13-15 November 2010, IISc Bangalore.
Randhawa, N S and Jana, R K (2014) Efficient removal of aqueous lead by leached sea nodules residue. Desalination and Water Treatment (IF-0.987). pp. 1-11.
Randhawa, N S and Jana, R K (2013) Lead sorption by sea nodule residue generated in reduction roasting – ammonia leaching. In: Mineral Processing Technology- 2013, 10-12 December 2013, Bhubaneshwar.
Randhawa, N S and Jana, R K and Agarwal, Sanjay and Ghorai, S and Maity, S K and Pal, J (2007) Production of Fe-Si-Mn from leached sea nodule residue. In: Inter. Sem. on Mineral Processing Technology, 2007, 22-24 Feb, 2007, IIT Mumbai.
Randhawa, N S and Jana, R K and Das, N N (2012) Manganese Nodules Residue: Potential Raw Material for FeSiMn Production. International Journal of Metallurgical Engineering, 1(2) . pp. 22-27.
Randhawa, N S and Jana, R K and Das, N N (2011) Removal of Cd(II) Ions from Aqueous Solution by Adsorption Using Manganese Nodules Leaching Residue. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.
Randhawa, N S and Jana, R K and Das, N N (2012) Silicomanganese production utilising low grade manganese nodules leaching residue. Mineral Processing and Extractive Metallurgy (Trans. IMM C) (0.667). pp. 1-9.
Randhawa, N S and Jana, R K and Das, N N (2012) Sorption characteristics of aqueous copper onto residue generated in ammoniacal leaching of manganese nodules. In: Inter. Symp. on Advances in Environment Friendly Technology in Mineral Processing and Metal Extraction (AETMME-2012), 18-20 Jan, 2012, Bhubaneswar.
Randhawa, N S and Jana, R K and Das, N N (2012) Thermodynamics and Viscosity Aspects in Manganese Nodule Residue Smelting for Silicomanganese Production. International journal of Metallurgical Engineering, 1(5) . pp. 88-95.
Randhawa, N S and Katiyar, P K and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2013) Anodic dissolution behaviour of tungsten carbide scraps in ammoniacal media. In: 17th Int. Conf. on non-ferrous Met. 2013, 5-6 July 2013, Ranchi (India).
Randhawa, N S and Mishra, D and Jana, R K (2010) Smelting of leached sea nodule residue blended with manganese ore for recovery of manganese. In: 14th Int. Conf. on non-ferrous Min. & Met. 2010, 9-10 July, 2010, Varanasi.
Randhawa, N S and Murmu, Nisha and Tudu, Shakuntala and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. Environmental Chemistry Letters, 12(4) (IF-1.906). pp. 517-522.
Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2009) Removal of chromium(III) by cation exchange resin, Indion 790 for tannery waste treatment. Hydrometallurgy, 99 (3-4). pp. 170-174.
Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2009) Recovery of acid and iron values from the spent pickle liquor by solvent extraction. In: NMD - ATM 2009, November 14, 2009 to November 17, 2009, Science City Complex,Kolkata, India.
Srivastava, Nidhi and Abhilash, (2012) Bacterial Isolates in hexavalent chromium reduction:Applications form synthetic to real systems. Masters thesis, Trident Academy of Creative Technology (Utkal University).
Vijaya Kumar, T V and Vasumathi, N and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2013) Recovery of ultrafine iron values from tailing pond of iron ore washing plants. The Indian Mineralogist, 1-2 . pp. 83-92.