Items where Subject is "Metallurgy > Steel Metallurgy"

A

Anumola, R and Ravi Kumar, B and Misra, R D K and Mannering, T and Panda, D and Jansto, S G (2008) On the determining role of microstructure of niobium-microalloyed steels with differences in impact toughness. Materials Science and Engineering A, 491 (1-2). pp. 55-61.

B

Baral, Jayashree (2011) Creep characterization of Boron added P91 steel in the temperature range 600 - 650 degree C. Mtech thesis, National Metallurgical Laboratory (NML).

Bhagat , A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2004) Prediction of Solubility of Carbonitrides in High Strength Low Alloy Steel. In: Second International Conference on advance structural Steels (ICASS-2004), 2004, China.

Bhatnagar, S S and Datar, N S and Guha, B K and Chattopadhyay, R and Sinha, R K (1977) High strength low alloy structural steels. NML Technical Journal, 19 (1). pp. 1-7.

Biswas, Somjeet and Sivaprasad, S and Narasaiah, N and Tarafder, S and Chakraborti, P C (2007) Load history effect on FCGR behaviour of 304LN stainless steel. International Journal of Fatigue, 29 (4). pp. 786-791.

Bucknall, E H and Steven, W (1949) Hardening response of steels. Progress in Metal Physics, 1 . pp. 235-258.

C

Chapman, J A and Philips, R and Craik, R L (1965) Pearlite free structural steels. NML Technical Journal, 7 (1). pp. 27-31.

Chatterjee, A B and Nijhawan, B R (1960) Stress-corrosion failure of austenitic stainless steel. NML Technical Journal, 2 (3). pp. 20-25.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2010) Assessment of creep and rupture behavior of 2.25Cr-1Mo steel — A strain based approach and its limitation. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 403-409.

Chaudhuri, S P and Mahanti, R K and Sivaramakrishnan, C S and Singh, M P (2002) Physical properties of some thermomechanically processed microalloyed steels. Materials & Design, 23 (5). pp. 489-496.

D

Das, Arpan and Sivaprasad, S and Ghosh, M and Chakraborti, P C and Tarafder, S (2008) Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel. Materials Science and Engineering A, 486 (1-2). pp. 283-286.

Das, Arpan and Tarafder, S (2008) Geometry of dimples and its correlation with mechanical properties in austenitic stainless steel. Scripta Materialia, 59 (9). pp. 1014-1017.

Das, Suchandan K and Das, Rashmita (2010) A Mathematical Model To Characterize Erosion Behaviour Of Boiler Grade Steels Impacted By Fly Ash In Coal Fired Power Plants. In: MS’10 Prague Proceedings of the International Conference on Modelling and Simulation 2010, 22 – 25 June 2010, Prague, Czech Republic.

Das, Suchandan K and Kumari, Sabita (2010) A Multi-Input Multi-Output Neural Network Model To Characterize Mechanical Properties Of Strip Rolled High Strength Low Alloy (HSLA) Steel. In: MS’10 Prague Proceedings of the International Conference on Modelling and Simulation 2010, 22 – 25 June 2010, Prague, Czech Republic.

Das, Suchandan K and Mehrotra, S P and Godiwalla, K M (2010) Technological advances in Refining and Processing of stainless Steel - A brief overview. In: Advances in Stainless Steel. Series in Metallurgy and Materials Science . University Press of India Pvt, Hyderabad, pp. 431-452. ISBN 9788173716966

Das, Swapan K (2007) Fracture Behaviour of Copper Strengthened HSLA Steel. PhD thesis, Bengal Engineering and Science University.

Das, Swapan K and Ghosh, R N and Sondhi, S K (2011) Prediction of carbide free layer formation in Fe–Ni–Cr austenitic steel process heater tube. Corrosion Engineering, Science and Technology .

Das, Swapan K and Sivaprasad, S and Das, S and Tarafder, S (2006) The effect of variation of microstructure on fracture mechanics parameters of HSLA-100 steel. Materials Science and Engineering A, 431 (1-2). pp. 68-79.

Das, Swapan K and Tarafder, S and Panda, A K and Chatterjee, S and Mitra, A (2007) Magnetic and mechanical properties of Cu-strengthened aged HSLA-100 steel. Philosophical Magazine, 87 (32). pp. 5065-5078.

Dubey, R K and Nag, P S and Gupte, P K (1968) Some observations on bainitic hardening of 18-4-1 high speed steel. NML Technical Journal, 10 (2). pp. 19-23.

G

Ghosh, Arindam and Das, Samar and Chatterjee, S (2008) Ageing behavior of a Cu-bearing ultrahigh strength steel. Materials Science and Engineering A, 486 (1-2). pp. 152-157.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2005) Structure and properties of a low carbon Cu bearing high strength steel. Materials Science and Engineering A, 396 (1-2). pp. 320-332.

Ghosh, M and Das, Samar and Banarjee, P S and Chatterjee, S (2005) Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple. Materials Science and Engineering A, 390 (1-2). pp. 217-226.

Ghosh, Sabita and Pal, T K and Mukherjee, Surojit and Das, Goutam and Ghosh, Sukomal (2008) Comparative study of heat-affected zone with weld and base material after post-weld heat treatment of HSLA steel using ball indentation technique. Journal of Materials Science, 43 (16). pp. 5474-5482.

Ghosh, Sabita and Tarafder, Mita and Sivaprasad, S and Tarafder, S (2010) Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 617-622.

Ghosh Chowdhury, S and Das, Samar and De, P K (2005) Cold rolling behaviour and textural evolution in AISI 316L austenitic stainless steel. Acta Materialia, 53 (14). pp. 3951-3959.

Ghosh Chowdhury, S and Datta, Sudarsan and Ravi Kumar, B and De, P K and Ghosh, R N (2007) Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel. Materials Science and Engineering A, 443 (1-2). pp. 114-119.

Ghosh Chowdhury, S and Munda, Parikshit and Singh, S R (2010) Development of Advanced High Strength Steels (AHSS) for Automobiles: A Review on Design Criteria. In: International Conference : Automotive Materials & Manufacturing - 2010, Oct 2010, Pune.

Gupta, K N (1971) Effect of titanium, aluminium & other additions on the solidification & structure of steel ingots. NML Technical Journal, 13 (1). pp. 14-18.

H

Haldar, A and Huang, X and Leffers, T and Hansen, N and Ray, R K (2004) Grain orientation dependence of microstructures in a warm rolled IF steel. Acta Materialia, 52 (18). pp. 5405-5418.

Humane, M M and Minj, R K and Peshwe, D R and Paretkar, R K (2010) Effect of two step cold rolling — continuous annealing on micro-structures, textures and mechanical properties in IF and IF-HS steel sheets. Transactions of the Indian Institute of Metals, 63 (1). pp. 21-30.

K

Kar, Abhijit and Ghosh, M and Ray, Ashok K and Ray, Ajoy K (2008) Effect of interfacial thickness and residual stress on the mechanical property of the alumina–stainless steel braze joint interface. Materials Science and Engineering A, 498 (1-2). pp. 283-288.

Kar, Abhijit and Mandal, Sudipta and Venkateswarlu, K and Ray, Ajoy K (2007) Characterization of interface of Al2O3–304 stainless steel braze joint. Materials Characterization, 58 (6). pp. 555-562.

Konar, J and Banerjee, N G (1965) Dissolution of steel and absorption of hydrogen by steel during acid pickling in presence of inhibitor Part II. NML Technical Journal, 7 (4). pp. 4-6.

Konar, J and Banerjee, N G (1971) Form of hydrogen in steel. NML Technical Journal, 13 (3). pp. 76-79.

Kundu, Sukumar and Ghosh, M and Chatterjee, S (2006) Diffusion bonding of commercially pure titanium and 17-4 precipitation hardening stainless steel. Materials Science and Engineering A, 428 (1-2). pp. 18-23.

M

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Effect of coating on the wear properties of stir cast Al–2Mg base short steel fiber reinforced composites. Materials Science and Engineering A, 460-461 . pp. 485-493.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Mishra, Suman K and Das, S and Ranganathan, S (2002) Precipitation in high strength low alloy (HSLA) steel: a TEM study. Materials Science and Engineering A, 323 (1-2). pp. 285-292.

Misra, R D K and Ravi Kumar, B and Somani, M and Karjalainen, L P (2008) Deformation processes during tensile straining of ultrafine/nanograined structures formed by reversion in metastable austenitic steels. Scripta Materialia, 59 (1). pp. 79-82.

Mitra, A and Mohapatra, J N and Swaminathan, J and Ghosh, M and Panda, A K and Ghosh, R N (2007) Magnetic evaluation of creep in modified 9Cr–1Mo steel. Scripta Materialia, 57 (9). pp. 813-816.

Mukherjee, J K (1971) Studies on the mechanical properties of Ni-Mn maraging steels. NML Technical Journal, 13 (3). pp. 65-68.

Mukherji, A N and Prabhakaram, P (1978) Diffusion coatings on steel. Anti-Corrosion Methods and Materials, 25 (1). pp. 5-12.

N

Narang, S K (1987) Immersion plating of tin and its alloys on steel wires. In: ATM-87, 1987, Bangalore.

Nemethy, L (1965) Rare earth metals in stainless steelmaking. NML Technical Journal, 7 (1). pp. 41-48.

Nijhawan, B R (1964) Growths pattern of iron and steel industry in India's economic development. NML Technical Journal, 6 (2). pp. 13-24.

P

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Palit Sagar, S and Parida, N and Das, S and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Panda, A K and Das, Swapan K and Mitra, A and Jiles, D C and Lo, C C H (2006) Evaluation of deformation behavior of HSLA-100 steel using magnetic hysteresis technique. IEEE Transactions on Magnetics, 42 (10). pp. 3264-3266.

Prasad, Prabha (2002) Effect of Monotonic and Cyclic Loading on the Fracture Behavior of SA 333 Steel. PhD thesis, Indian Institute of Technology Kharagpur.

R

Rajinikanth, V and Husain, Md Murtuja and Ray, Ajoy K (2010) Difffusion bonding of non weldable high alloy steel. In: National Welding Meet , August 2010, Puducherry.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Das, Arpan (2007) Effect of large strains on grain boundary character distribution in AISI 304L austenitic stainless steel. Materials Science and Engineering A, 454-455 . pp. 239-244.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2009) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Ravi Kumar, B and Ghosh, M (2007) Surface and mid-plane texture evolution in austenite phase of cold rolled austenitic stainless steels. Materials Science and Engineering A, 457 (1-2). pp. 236-245.

Ravi Kumar, B and Mahato, B and Bandopadhyay, N R and Bhattacharya, D K (2005) Comparison of rolling texture in low and medium stacking fault energy austenitic stainless steels. Materials Science and Engineering A, 394 (1-2). pp. 296-301.

Ravi Kumar, B and Singh, A K and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2006) Deformation-induced transformation textures in metastable austenitic stainless steel. Materials Science and Engineering A, 429 (1-2). pp. 205-211.

Ray, Ashok K and Diwakar, K and Prasad, B N and Tiwari, Y N and Ghosh, R N and Whittenberger, J D (2007) Long term creep–rupture behaviour of 813 K exposed 2.25–1Mo steel between 773 and 873 K. Materials Science and Engineering A, 454-455 . pp. 124-131.

Roy, A and Tarafder, S and Sivaprasad, S and Das, Swapan K and Manna, I and Chattoraj, I (2007) Fatigue crack growth retardation in an HSLA steel in benign environments. International Journal of Fatigue, 29 (2). pp. 254-260.

Roy, Rajat K and Ghosh, M and Panda, A K and Ghosh, R N and Mitra, A (2010) Development of rapidly solidified 6.5 wt% silicon steel for magnetic applications. Transactions of the Indian Institute of Metals, 63 (4). pp. 745-750.

Roy, Rajat K and Panda, A K and Das, Swapan K and Govind, and Mitra, A (2009) Development of a copper-based filler alloy for brazing stainless steels. Materials Science and Engineering A, 523 (1-2). pp. 312-315.

S

Sahu, Puspendu and Curtze, Sven and Das, Arpan and Mahato, B and Kuokkala, Veli Tapani and Ghosh Chowdhury, S (2010) Stability of austenite and quasi-adiabatic heating during high-strain-rate deformation of twinning-induced plasticity steels. Scripta Materialia, 62 (1). pp. 5-8.

Sharma, S and Mukherjee, T (1977) Structure and creep properties of commercial heats of 2¼ Cr-I Mo steel made in TISCO in comparison with international standards. NML Technical Journal, 19 (1). pp. 8-14.

Singh, Inder (1970) Effect of inhibitors on the permeability and diffusion co-efficient of hydrogen in steel. NML Technical Journal, 12 (1). pp. 22-28.

Singh, Raghuvir and Das, Goutam and Singh, P K and Chattoraj, I (2009) Low-Temperature Sensitization Behavior of Base, Heat-Affected Zone, and Weld Pool in AISI 304LN. Metallurgical and Materials Transactions A, 40 (5). pp. 1219-1234.

Singh, Raghuvir and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and De, P K and Chattoraj, I (2007) The importance of grain size relative to grain boundary character on the sensitization of metastable austenitic stainless steel. Scripta Materialia, 57 (3). pp. 185-188.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2000) Effect of prestrain on fracture toughness of HSLA steels. Materials Science and Engineering A, 284 (1-2). pp. 195-201.

T

Tarafder, Mita and Das, S K and Chattoraj, I and Nasipuri, M and Tarafder, S (2010) Fractal-based quantification of crack paths for determination of effective microstructural length scales and fracture toughness. Scripta Materialia, 62 (2). pp. 109-112.

Tiwary, S K and Gupte, P K (1970) Hardening of silicon spring steel. NML Technical Journal, 12 (1). pp. 1-4.

V

Vaish, A K and Singh, S D and Minj, R K and Bandyopadhyay, D (2004) An insight into energy saving measures in an integrated steel plant. Journal of Metallurgy and materials Science, 46 (4). pp. 213-231.

Venkatrama, M and Mohanty, O N and Ghosh, R N (2001) Modelling of transformation kinetics in HSLA 100 steel during continuous cooling. Scandinavian Journal Of Metallurgy, 30 (1). pp. 8-13.