Items where Subject is "Waste Management"

A

Abhilash, and Prakash, Mayuri and Mehta, K D and Pandey, B D (2011) Microbial Composite in Trivalent Chromium Remediation from Effluents. In: IIIrd International Congress on Nonferrous Metals, 7-9th Sept 2011, Krasnoyarsk,Russia.

Abhilash, and Singh, Nivedita and Mehta, K D and Pandey, B D (2011) Kaolinte Based Microbial Composite in Cr(III) sorption from waste waters. In: National Seminar on Environmental Waste Management in Metallurgical Industries, 15-16th March 2010, ITBHU,Varanasi.

Abhilash, and VenkatRaman, R and Mehta, K D and Pandey, B D (2011) Isolation and growth kinetic studies of novel isolates from Indian Ocean nodules. Indian Journal of Marine Sciences, 40 (5). pp. 648-652.

Abhilash, (2020) Dissimilatory Iron-Reducing Bacteria: A Template for Iron Mineralization and Nanomaterial Synthesis. In: Microbes for Sustainable Development and Bioremediation. CRC Press, US, pp. 89-106. ISBN 9780367226008

Abhilash, (2013) Interview in Down to Earth Magazine. Down to Earth Magazine, February . p. 41.

Abhilash, and Agarwal, Harshita and Meshram, Pratima and Meshram, Rohit B and Jha, Soni and Patel, J N and Soni, M K and Rokkam, Kiran and Mashruwala, Sheeba (2021) Green process for recovery of vanadium from hazardous spent contact process catalyst by oxalic acid: kinetics and mechanism. Separation Science and Technology (1.75).

Abhilash, and Ghosh, Anirban and Pandey, B D (2015) Bioleaching of low grade granitic chalcopyrite ore by hyperthermophiles: Elucidation of kinetics-mechanism. Revue de Métallurgie, 112/5 (IF-0.176). pp. 1-14.

Abhilash, and Ghosh, Anirban and Sarkar, Supriyo and Pandey, B D (2015) Microbial Variants from Iron Ore Slimes: Mineral Specificity and pH Tolerance. Indian Journal of Microbiology, 55(4) (IF-0.899). pp. 430-449.

Abhilash, and Hedrich, Sabrina and Meshram, Pratima and Schippers, Axel and Gupta, A and Sen, Subhadra (2022) Extraction of REEs from Blast Furnace Slag by Gluconobacter oxydans. Minerals, 12(6) .

Abhilash, and Hedrich, Sabrina and Schippers, Axel (2021) Distribution of scandium in red mud and extraction using Gluconobacter oxydans. Hydrometallurgy, 202 (3.356).

Abhilash, and Inamdar, I (2022) Recycling of plastic wastes generated from COVID-19: A comprehensive illustration of type and properties of plastics with remedial options. Science of Total Environment, 838(1) .

Abhilash, and Kumari, Neha and Pandey, B D (2012) Isolation of native extremophiles from indian bauxite and red mud for mineral beneficiation. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2011) Bioleaching - An Alternate Uranium Ore Processing Technology for India. Energy Proceedia, 7 . pp. 158-162.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2010) Column Bioleaching of a Low-Grade Silicate Ore of Uranium. Mineral Processing and Extractive Metallurgy Review, 31 (4). pp. 224-235.

Abhilash, and Mehta, K D and Pandey, B D (2013) Bacterial leaching kinetics for copper dissolution from a lowgrade Indian chalcopyrite ore. Rem: Revista Escola de Minas, 66(2) (IF-0.785). pp. 245-250.

Abhilash, and Mehta, K D and Pandey, B D (2008) Bio-Hydrometallurgy for Extraction of Nonferrous Metals. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Abhilash, and Mehta, K D and Pandey, B D (2006) Video on Operational COlumn Bioleaching of Uranium at 100kg scale at UCIL premises. [Video]

Abhilash, and Meshram, Pratima (2019) Recovery of Rare Earth Elements from Metallurgical Wastes. In: Sustainable and Economic Waste Management-Resource Recovery Techniques. CRC Press, Australia, pp. 247-262. ISBN 9780367232559

Abhilash, and Meshram, Pratima and Gupta, A and Sen, Subhadra (2023) Steel Plant Wastes as a Resource of Rare Earth Elements and Rare Metals–Characterisation, Resource Estimation, and Economic Assessment. Transactions of the Indian Institute of Metals .

Abhilash, and Meshram, Pratima and Sarkar, Supriyo and Venugopalan, T (2017) Exploring Blast Furnace Slag As A Secondary Resource For Extraction Of Rare Earth Elements. Minerals & Metallurgical Processing Journal, 34(4) (IF-0.692). pp. 178-182.

Abhilash, and Nair, D G and Hansdah, Kirtal and Dhal, B and Mehta, K D and Pandey, B D (2012) Bioremoval of Chromium (III) from Model Tanning Effluent by Novel Microbial Isolate. International Journal of Metallurgical Engineering, 1 (2). pp. 12-16.

Abhilash, and Pal , SC and Mehta, K D and Pandey, B D and Mankhand, T R (2012) Bioprocessing of a Low-grade Chalcopyrite Ore by the Isolate of Acidithiobacillus Ferrooxidans. International Journal of Metallurgical Engineering, 1(5) . pp. 72-77.

Abhilash, and Pandey, B D (2012) Biohydrometallurgical Processing of Indian Uranium Ores. PhD thesis, Jadavpur University.

Abhilash, and Pandey, B D (2013) Bioreactor leaching of uranium from a low grade Indian silicate ore. Biochemical Engineering Journal, 71 (IF-2.645). pp. 111-117.

Abhilash, and Pandey, B D (2015) Environmental Processing of Zn Containing Wastes and Generation of Nanosized Value-Added Products. In: Bio-Nanoparticles: Biosynthesis and Sustainable Biotechnological Implications. Bio-Nanoparticles, 1 . Wiley Blackwell, Philadelphia, US, pp. 225-253. ISBN 978-1-118-67768-1

Abhilash, and Pandey, B D (2015) Microbial Extraction of Uranium from Ores. In: Microbiology for Minerals, Metals, Materials and the Environment. Taylor and Francis- CRC Press, Philadelphia, US, pp. 59-98. ISBN 9781482257298

Abhilash, and Pandey, B D (2013) Microbial processing of apatite rich low grade Indian uranium ore in bioreactor. Bioresource Technology, 128 (IF-4.980). pp. 619-623.

Abhilash, and Pandey, B D (2013) Microbially Assisted Leaching of Uranium—A Review. Mineral Processing and Extractive Metallurgy Review, 34 . pp. 81-113.

Abhilash, and Pandey, B D (2011) Role of ferric ions in bioleaching of uranium from low tenor Indian ore. Canadian Metallurgical Quaterly, 50 (2). pp. 102-112.

Abhilash, and Pandey, B D (2012) Synthesis of zinc-based nanomaterials: a biological perspective. IET-Nanobiotechnology, 6 (4). pp. 144-148.

Abhilash, and Pandey, B D and Ray, Lalithagauri (2012) Bioleaching of apatite rich low grade Indian uranium ore. Canadian Metallurgical Quaterly, 51 (4). pp. 390-402.

Abhilash, and Pandey, B D and Singh, A K (2013) Comparative Performance of Uranium Bioleaching from Low Grade Indian Apatite Rock in Column and Bioreactor. Energy Procedia, 39 . pp. 20-32.

Abhilash, and Revati, K and Pandey, B D (2011) Microbial synthesis of iron-based nanomaterials—A review. Bulletin of Material Science, 34 (2). pp. 191-198.

Abhilash, and Sinha, Manish K and Sinha, Shivendra and Pandey, B D (2014) Extraction of lanthanum and cerium from Indian red mud. International Journal of Mineral Processing, 127 (IF-1.461). pp. 70-73.

Abhilash, and Sinha, Shivendra and Meshram, Pratima and Pandey, B D and Behera, P K and Satapathy, B K (2014) RedMud: A Secondary Resource for Rare Earth Elements. In: International Bauxite, Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, India.

Abhilash, and Srivastava, S K and Rahman, M R and Meshram, Pratima (2024) Red Mud Neutralisation by CO2 Promotes Alkali Recovery and Higher Scandium Extraction. Waste and Biomass Valorization .

Abhilash, and Tabassum, Shirin and Ghosh, Anirban and Meshram, Pratima and van Hullebusch, Eric (2021) Microbial Processing of Waste Shredded PCBs for Copper Extraction Cum Separation—Comparing the Efficacy of Bacterial and Fungal Leaching Kinetics and Yields. Metals, 11, 317 (2.369).

Abhilash, and Usha, Yenni and Seetharaman, K and Meshram, Pratima and Mehta, K D and Pandey, B D (2021) Application of Hydrodynamics Using CFD in Evaluating Efficacy of External Loop Air-lift Reactor Biochemical Leaching of Sea Nodules. Mineral Processing and Extractive Metallurgy Review .

Abhilash, and Vaidyanathan, Swetha and Meshram, Pratima (2021) An overview on chemical processes for synthesis of graphene from waste carbon resources. Carbon Letters (1.917).

Abhilash, and Venkat Ramam, R and Mehta, K D and Pandey, B D (2010) Native Marine Isolates from Indian Ocean Nodules. Microbiology Focus, 2.3 . p. 7.

Achimovičová, M and Baláž, Peter and Rečnik, A and Kováč, J and Rečnik, A and Kováč, J and Feldhoff, A and Gock, E (2011) Mechanochemical synthesis of nanocrystalline lead selenide. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Adeleke, A A and Odusote, J K and Lasode, O A and Ikubanni, P P and Malathi, M and Paswan, Dayanand (2019) Evaluation of Thermal Decomposition Characteristics and Kinetic Parameters of Melina Wood. Biofuels (IF-1.130). pp. 1-7.

Adhikari, U B and Das, S K and Banerjee, G (1998) Bonding of high fly ash content ceramic bodies at low temperatures. pp. 143-148.

Agate, A D (1973) Survey of Thiobacillus ferrooxidans in solubilization of copper sulphide ores. NML Technical Journal, 15 (4). pp. 25-27.

Agrawal, A and Kumari, S and Sahu, K K (2011) Studies on solvent extraction of iron(III) as a step for conversion of a waste effluent to a value added product. Journal of Environmental Management, 92 (12). pp. 3105-3111.

Agrawal, A and Sahoo, K L and Ghosh, Sukomal and Pandey, B D (2002) Recovering Iron from Copper Slag. Foundry Management & Technology, October . pp. 16-21.

Agrawal, A and Sahu, K K and Pandey, B D (2004) A Comparative adsorption study of copper on various industrial solid wastes. AIChE Journal, 50 (10). pp. 2430-2438.

Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2017) c. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151.

Alex, T C and Kalinkin, A M and Nath, S K and Gurevich , B I and Kalinkina, E V and Tyukavkina, W and Kumar, Sanjay (2013) Utilization of zinc slag through geopolymerization: Influence of milling atmosphere. International Journal of Mineral Processing, 123 (IF-1.378). pp. 102-107.

Alex, T C and Mucsi, G and Venugopalan, T and Kumar, Sanjay (2021) BOF Steel Slag: Critical Assessment and Integrated Approach for Utilization. Journal of Sustainable Metallurgy .

Ali, Malek and Basu, Projjal (2011) Synthesis of nanostructured titanium carbide from titanium oxide and Ferro-titanium through mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Aman, Noor and Mishra, T and Hait, Jhumki and Jana, R K (2011) Simultaneous photoreductive removal of copper (II) and selenium (IV) under visible light over spherical binary oxide photocatalyst. Journal of Hazardous Materials, 186 (12). pp. 360-366.

Anand, Amit and Jha, Manis K and Kumar, Vinay and Sahu, Rina (2013) Recycling of Precious Metal Gold from Waste Electrical and Electronic Equipments (WEEE): A review. In: Proceeding of the XIII International Seminar on Mineral Processing Technology, 10/12/2013 To 12/12/2013, CSIR-IMMT, Bhubaneswar.

Anand Ram, S and Abhilash, and Mehta, K D and Pandey, B D and Mankhand, T R (2008) Bioleaching of a low grade Indian Chalcopyrite ore by Microbial consortium. In: CTWMI 2008, 13-16 April 2008, Santiago,Chile.

Asnani, C K and Ramachandran, K and Sarma, G V S N and Kulkarni, A P (2002) Ultrasonic Cleaning and Re-use of HEPA Filters in Nuclear Fuel Manufacturing Facility. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25, January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur.

B

Baláž, Peter and Dutková, Erika (2011) Applied mechanochemistry of solids (a review). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Bandopadhyay, A (2008) Environmental Issues in the Processing and Extraction of Non-ferrous Metals. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Bandopadhyay, A and Singh, K K (1997) Control of pollution created by suspended particulate matters (SPM) from small and medium scale iron and steel and refractory industries: the dry and wet options. In: UNSPECIFIED.

Bandyopadhyay, D (2008) Kinetic Analysis of Metallurgical Systems. In: Proceedings on Extraction of Nonferrous Metals and their Recycling- A training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Banerjee, NG and Banerjee, T (1950) Recovery of Nickel and Zinc from Silver Refinery Waste Liquid- Part I: Recovery of Nickel by Electro Deposition. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Banerjee, S K and Narayanan, P I A (1959) Pilot Plant studies on reclamation of used foundry sand from M/s. Bhartia Electric Steel Co. Ltd., Calcutta. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Barik, Anil (2010) Effective management of coke oven solid waste and by-products in steel plant. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Behera, R K and Satapathy, P K and Randhawa, N S and Das, N N (2010) Adsorptive Removal of Phosphate Ions Using Leached Sea Nodule Residue Generated by the Reduction–Roasting Ammoniacal Leaching Process. Adsorption Science & Technology, 28 (7). pp. 611-627.

Besterci, Michal and Sülleiová, Katarína and Velgosová, Oksana (2011) Mechanical alloying of Al-C system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Bhaskar Raju, G and Latha Priya, D and Latha, Swarna and Parvathy, S and Prabhakar, S (2010) Removal of organics from the waste waters of dyebath by electrooxidation. Asian Journal of Water, Environment and Pollution, 7 (4). pp. 19-23.

Bhatnagar, Deepak and Jancy, A (1998) Cobalt recovery from Metallurgical Wastes of Zinc Industry. In: UNSPECIFIED.

Bhattacharya, Madhusmita (2011) Isolation and purification of bacteria from bauxite and iron ore mine samples. Masters thesis, National Metallurgical Laboratory (NML).

Bhattacharyya, P and Chattoraj, U S and Saha, P and Sarkhel, B R and Chakrabarti, D M (1998) Salvaging the values from the rejects of a by-product recovery plant. In: UNSPECIFIED.

Bhattacharyya, P and Sarkhel, B R and Chakrabarti, D M and Saha, P and Ghosh, S R and Chattoraj, U S (1996) Gravity separation at variable 'g' for management of mineral wastes and pollution. In: UNSPECIFIED.

Bhattacharyya, P and Singh, R and Sil, S K and Sengupta, S K and Saha, P and Srivastava, J P and Maulik, S C (2002) Reduction of Environment Pollution in Processing of Barite. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Biswas, Somjeet and Singh, Satyaveer D and Suwas, Satyam (2011) Microstructure and texture evolution of Pure magnesium during ecae. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Brahma, P and Dutta, S (2011) Novel transport properties of nanostructured α-Fe2O3. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

C

Chaira, D and Mishra, B K and Sangal, S (2011) Synthesis and characterization of nanocrystalline carbides By reaction milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chandwani, H K and Vishwanathan, V and Mahadevan, H (1998) Environmental Issues to be Addressed in Indian Alumina Refineries and their Possible Solutions. In: UNSPECIFIED.

Chatterjee, Anjan K (2011) Enhancing the potential of industrial use of the Indian fly ashes through echano-chemical activation – prospects and problems. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chatterjee, Sandip and Kumari, Archana and Jha, Manis K (2016) Sustainable Recycling Technology for Electronic Waste. In: Sustainability in the mineral and energy sectors. Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742 CRC Press, Boca Raton, pp. 189-204. ISBN 978-1-4987-3302-1

Chaubey, A K and Mishra, B K and Mukhopadhyay, N K and Mukherjee, P S (2011) Effect of compact density and preheating temperature of the Al-Ti-C Preform on the fabrication of in-situ Mg–TiC composites. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chauhan, Sandeep Kumar and Soni, P R (2011) Development of 2024 p/m aluminium alloy–SiCp nanocomposites via mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chi, Tran D and Lee, Jae-chun and Pandey, B D and Jeong, Jinki and Yoo, Kyoungkeun and Huyunh, Trung Hai (2011) Bacterial Cyanide Generation in Presence of Metal Ions (Na+, Mg2+, Fe2+, Pb2+) and Gold Bioleaching from Waste PCBs. Journal of Chemical Engineering of Japan, 44(10) (0.442 (SCI)). pp. 692-700.

Chi, Tran D and Lee, Jae-chun and Pandey, B D and Yoo, Kyoungkeun and Jeong, Jinki (2011) Bioleaching of gold and copper from waste mobile phone PCBs by using a cyanogenic bacterium. Minerals Engineering, 24 . pp. 1219-1222.

Choubey, Pankaj K and Dinkar, Om Shankar and Panda, Rekha and Kumari, Archana and Jha, Manis K and Pathak, D D (2021) Selective extraction and separation of Li, Co and Mn from leach liquor of discarded lithium ion batteries (LIBs). Waste Management, 121 . pp. 452-457.

Choubey, Pankaj K and Jha, Manis K and Gupta, Divika and Jeong, Jinki and Lee, Jae-chun (2014) Recovery of rare metal indium (In) from discarded LCD monitors. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Choubey, Pankaj K and Jha, Manis K and Pathak, D D (2020) Recovery of Manganese and Cobalt from Discarded Batteries of Toys. In: Rare Metal Technology 2020. The Minerals, Metals & Materials Society 2020, pp. 275-281.

Choubey, Pankaj K and Jha, Manis K and Sahu, S K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun and Pathak, Devendra Deo (2013) Solvent extraction (SX) and separation of Sn/ Pb from the leach liquor of waste solder material and effluents. In: Proceedings of the XIII lnternolionol Seminar on Mineral Processing Technologt (MPT-20I3), 10/12/2013 to 12/12/2013, CSIR-IMMT, Bhubaneswar.

Choubey, Pankaj K and Kumari, Archana and Jha, Manis K and Pathak, D D (2021) Recovery of Cobalt as Cobalt Sulfate from Discarded Lithium-Ion Batteries (LIBs) of Mobile Phones. Rare Metal Technology 2021 . pp. 47-53.

Choubey, Pankaj K and Kumari , Archana and Jha, Manis K and Pathak, Devendra Deo (2021) Recovery of Cobalt as Cobalt Sulfate from Discarded Lithium-Ion Batteries(LIBs) of Mobile Phones. The Minerals, Metals & Minerals Society 2021 .

Choubey, Pankaj K and Panda, Rekha and Jha, Manis K and Lee, Jae-chun and Pathak, D D (2015) Recovery of copper and recycling of acid from the leach liquor of discarded Printed Circuit Boards (PCBs). Separation and Purification Technology, 156 (IF-3.091). pp. 269-275.

Choubey, Pankaj K and Parween, Rukshana and Panda, Rekha and Dinkar, Om Shankar and Jha, Manis K (2022) Recovery of Lithium from Black Cathode Active Materials of Discarded Lithium-Ion Batteries. The Minerals, Metals & Materials Society 2022 . pp. 739-745.

Choubey, Pankaj K and Singh, Nityanand and Panda, Rekha and Kumar, J Rajesh and Yoo, Kyoungkeun and Park, Ilhwan and Jha, Manis K (2021) Development of Hydrometallurgical Process for Recovery of Rare Earth Metals (Nd, Pr, and Dy) from Nd-Fe-B Magnets. Metals .

Choudhary, B N (2018) Recovery of valuable metals from E-waste. Journal of Metallurgy and Materials Science, 60(2) . pp. 95-103.

Csőke, B and Mucsi, G and Sík, Cs (2011) Production and practical application of mechanically activated fly ash-based binding material. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

D

Das, Avimanyu (2008) Value Addition to Ores through Beneficiation. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Das, Avimanyu and Sarkar, B and Vidyadhar, A and Roy, Subrata (2010) Efficient Recovery of Combustibles From Coking Coal Fines. Mineral Processing and Extractive Metallurgy Review, 31 (4). pp. 236-249.

Das, Bappaditya and Kundu, Rajen and Chakravarty, Sanchita Characterization and leaching of rare earth elements from Indian coal ash. In: 75 years of Mineral Exploration and Future Challenges in India (MEFCI-2022), April 5-6, 2022, AMD Complex, Hyderabad.

Das, S K and Kumar, Sanjay and Singh, K K and Ramachandrarao, P (1996) An Innovative approach towards utilisation of wastes generated from iron & steel industries. In: UNSPECIFIED.

Das, S N and Thakur, R S and Ray, H S (1998) Red Mud Pollution Problems : Some observations. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 11-16. ISBN 81-87053-28-7

Das, Sanjeev and Prasad, Ranjit and Singh, R P and Abhilash, (2017) Physical, Mechanical and Metallurgical Characteristics of Banded Hematite Jasper of Ghatkuri (Gua), Jharkhand. Journal of Geological Society of India, 90(5) (IF-0.479). pp. 623-627.

Dasgupta, S B and Narayanan, P I A (1955) Concentration of Blast furnace flue dust from TISCO. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Dash, S (2009) Extraction of chitosan from bioresources and its application in biosorption. Masters thesis, National Metallurgical Laboratory (NML).

Deshpande, K G (1998) Use of spent Potlining from the Aluminium Electrolytic cell as an additive to Arc Furnace Steel Melting and Cupola iron Melting in Steel industries. In: UNSPECIFIED.

Dhal, B and Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2010) Bio-processing for metal extraction, recycling and effluent treatment- an overview. In: International Conference on Non-ferrous Metals 2010, 10-11th Aug 2010, Varanasi.

Dhal, B and Abhilash, and Mehta, K D and Pandey, B D (2010) Microbial Bioremediation of Chromium: A promising approach of environmental microbiology. In: Microbial Biotechnology. APH Pub. Corp., New Delhi, New Delhi, pp. 130-168. ISBN ISBN 978-81-313-0849-3

Dhal, B and Abhilash, and Pandey, B D (2014) Microbial sorption studies for removal of trivalent chromium from model tanning bath. Advanced Materials Research, 828 . pp. 33-44.

Dhal, B and Abhilash, and Pandey, B D (2013) Process optimization for bio-beneficiation of a chromite concentrate by a Cr(VI) reducing native microbe (Bacillus sp.). International Journal of Mineral Processing, 123 (IF-1.378). pp. 129-136.

Dhal, B and Das, N N and Pandey, B D and Thatoi, Hruayanath (2011) Environmental Quality of the Boula-Nuasahi Chromite Mine Area in India. Mine Water and the Environment, 30 (3). pp. 191-196.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2012) Bacterial Reduction of Hexavalent Chromium from Contaminated Overburden Soil. International Journal of Metallurgical Engineering, 1(5) . pp. 83-87.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2013) Characterizing toxic Cr(VI) contamination in chromite mine overburden dump and its bacterial remediation. Journal of Hazardous Materials, 260 (IF-4.173). pp. 141-149.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2010) Kinetic aspects of Cr(VI) bioremediation of water and soil contaminated from chromite mine overburden dumps. In: XI International Seminar on Mineral Processing Technology (MPT-2010), 15-17th Dec. 2010, NML Jamshedpur.

Dhal, B and Mehta, K D and Das, N N and Thatoi, Hruayanath and Pandey, B D (2011) Native fungal isolates for biosorption of Cr(VI): A potential approach for treatment of chromite mine drainage. In: Proceedings of National Seminar on Environmental Management in Metallurgical Industries (EMMI-2010). Allied Publishers Pvt. LtD, BHU Var, pp. 67-71. ISBN 978-81-8424-728-2

Dhal, B and Pandey, B D (2013) Microbial Biosorption of metal contaminants: An Environment friendly process. In: Advances in Biotechnology. Studium Press LLC, NEW DELHI, pp. 125-152. ISBN 1-626990-13-1

Dhal, B and Pandey, B D and Abhilash, (2018) Mechanism elucidation and adsorbent characterization for removal of Cr(VI) by native fungal adsorbent. Sustainable Environment Research . (In Press)

Dhal, B and Thatoi, Hruayanath and Das, N N and Pandey, B D (2013) Chemical and microbial remediation of hexavalent chromium from contaminated soil and mining/metallurgical solid waste: A review. Journal of Hazardous Materials, 250-251 (IF-4.173). pp. 272-291.

Dhivya, E and Magadevan, D and Palguna, Y and Mishra, T and Aman, Noor (2019) Synthesis of titanium based hetero MOF photocatalyst for reduction of Cr (VI) from wastewater. Journal of Environmental Chemical Engineering, 7(4) . p. 103240.

Dinkar, Om Shankar and Panda, Rekha and Choubey, Pankaj K and Hait , Jhumki and Jha , Manis Kumar and Ambade, Balram (2022) Pyrolysis Pre-treatment of PCBs: A Sustainable Solution to Convert Encapsulation into Marketable Product and Separation of Metallic Concentrate. Journal of Metallurgy and Materials Science, 64(1-2) .

Dinkar, Om Shankar and Parween, Rukshana and Panda, Rekha and Choubey, Pankaj K and Ambade , Balram and Jha, Manis K (2022) Potential hydrometallurgical processes to recycle metals from discarded personal computer. Geosystem Engineering . pp. 132-142.

Dinkar, Om Shankar and Parween, Rukshana and Singh, Nityanand and Panda, Rekha and Choubey, Pankaj K and Ambade, Balram and Jha, Manis K (2022) Recovery of Nickel from Waste Printed Circuit Boards of Personal Computers. Journal of Metallurgy and Materials Science, 64(1-2) .

Director, NML (2013) 26th National Convention of Metallurgical and Materials Engineers & National Seminar on Exploitation of Lean Grade Ore, Ore Fines and Urban Ores : Challenges, Problems & Solutions LGO-2013. In: 26th National Convention of Metallurgical and Materials Engineers & National Seminar on Exploitation of Lean Grade Ore, Ore Fines and Urban Ores. CSIR-NML, 2013, pp. 1-312.

Director, NML (1964) Abstracts of papers - Symposium on utilisation of metallurgical wastes. In: Symposium on utilisation of metallurgical wastes, March 10, 1964, Jamshedpur.

Director, NML (2015) Annual Report 2014-2015. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2016) Annual Report 2015-2016. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2011) Director's Desk - 60th RC Meeting of CSIR-NML. CSIR-National Metallurgy Laboratory, Jamshedpur.

Director, NML (2010) NML Diamond Jubilee Souvenir. In: NML Diamond Jubilee Souvenir. National Metallurgy Laboratory, Jamshedpur.

Director, NML (2013) Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar. In: Exploitation of Lean Grade Ore, Ore Fines and. www.nmlindia.org, pp. 1-287.

Dutta, Deblina and Kumari, Archana and Panda, Rekha and Jha, Soni and Gupta, Divika and Goel, Sudha and Jha, Manis K (2018) Close loop separation process for the recovery of Co, Cu, Mn, Fe and Li from spent lithium-ion batteries. Separation and Purification Technology, 200 (IF-3.359). pp. 327-334.

Dutta, Deblina and Panda, Rekha and Jha, Manis K and Goel, Sudha (2018) Recovery of Manganese from Scrap Batteries of Mobile Phones. In: Rare Metal Technology 2018, The Minerals, Metals & Materials Series, https://doi.org/10.1007/978-3-319-72350-1_16. The Minerals, Metals & Materials Society 2018, pp. 175-183.

Dutta, Deblina and Panda, Rekha and Kumari, Archana and Goel, Sudha and Jha, Manis K (2018) Sustainable recycling process for metals recovery from used printed circuit boards (PCBs). Sustainable Materials and Technologies, 17 (IF-3.567).

F

Fabián, Martin and Baláž, Peter and Briančin, Jaroslav (2011) Study of the silver ions cementation after mechanical activation of cementator. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Floyd, John (1998) Pollution Control in the Non-Ferrous Industries - An Indian Perspective of Worldwide Importance. In: UNSPECIFIED.

Foct, Jacques (2011) Specifics of mechanically driven atomic distributions In interstitial alloys. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Frias, C and Raychaudhuri, A and Palma, J and Diaz, G (2002) Development of New-Concept Clean Technologies to Extract Metals from Primary and Secondary Sources. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

G

Gazder, Azdiar A and Florian, H Dalla Torre and Christopher, H J Davies and Pereloma, Elena V (2011) The microstructure, texture and mechanical properties of AS-ECAE Interstitial-free steel and copper. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghorai, Tanmay K and Pramanik, Panchanan (2011) Mechanochemical synthesis, characterization and photocatalytic Properties of M2O3/TiO2 (M = Fe, Mn) nano-composite under visible light. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghosh, Anirban and Abhilash, and Pandey, B D (2015) A study on organo-sulfur tolerant bacterial strains from extremophilic coal mine environment- isolation and growth factors. Indian Journal of Geo-Marine Sciences, 44(3) (IF-0.616). (In Press)

Ghosh, Anirban and Kumari, Sujata and Abhilash, and Pandey, B D (2015) Microbial Biodesulphurisation of Coal. In: Microbiology for Minerals, Metals, Materials and the Environment. Taylor and Francis- CRC press, Philadelphia, US, pp. 153-184. ISBN 9781482257298

Ghosh, Anirban and Kumari, Sujata and Abhilash, and Pandey, B D (2013) Microbial upgradation of Meghalaya coal by Rhodococcus rhodochrous and Pseudomonas aeruginosa. In: Proceedings of XIII international seminar on Mineral Processing Technology, 10-12, December 2013, Bhubaneswar.

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V and Das, S K and Ray, Ajoy K (2011) Evaluation of interface microstructure for friction stir welded aluminium-stainless steel plate. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghosh, N K and Parthasarathy, L (2002) Atmospheric Pollution Control in Coke Ovens. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Ghosh, Rachit and Kumar, Anil and Kumar, Sanjay (2013) Flyash Geopolymer Concrete as Future Concrete. International Journal of Advanced Scientific and Technical Research, 6(3) . pp. 260-271.

Goel, Malti (1998) Reduction of Greenhouse Gas Pollution in Non-Ferrous Metal industry : Indian Perspective. In: UNSPECIFIED.

Goel, R P (2008) Thermodynamic Considerations in Metal Extraction. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Gorai, Bipra and Jana, R K and Premchand, (2002) Reduction of Emission from Aluminium Industries and Cleaner Technology. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Govindaraj, M and Muthkumar, M and Bhaskar Raju, G (2010) Electrochemical oxidation of tannic acid contaminated wastewater by RuO2/IrO2/TaO2-coated titanium and graphite anodes. Environmental Technology, 31 (14). pp. 1613-1622.

Grosdidier, T and Ji, G and Llorca, N (2011) On the processing of dense hetero-nanostructured metallic materials for improved strength / ductility balance by ecae and sps methods. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, CSIR-NML, Jamshedpur.

Gupta, S K and Tandon, J K and Ghorai, D N and Pal, P K and Sarkar, P K (2002) Transforming Steel Domain Green through Innovative Waste Management - A Jindal Approach. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Gurevich, Y L and Teremova, M I and Bondarenko, G N and Kislan, S L and Abhilash, (2015) Bio-chemical leaching of kaolinite-hematite-boehmite type bauxite ore. Indian Journal of Chemical Technology, 22/5 (IF-0.655). pp. 248-252.

Gurevich , B I and Kalinkin, A M and Kalinkina, E V and Kalinnikov, V T (2011) Utilization of ferrous-magnesium slag for production of binding materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

H

Hansdah, Kirtal (2011) Optimisation of parameters for biosorption of trivalent chromium from model tannery effluent using penicillium species. Masters thesis, National Metallurgical Laboratory (NML).

Hoang, L L and Jeong, Jinki and Lee, Jae-chun and Pandey, B D and Yoo, Jae-Min and Trung, H H (2011) Hydrometallurgical Process for Copper Recovery from Waste Printed Circuit Boards (PCBs). Mineral Processing and Extractive Metallurgy Review, 32 (2). pp. 90-104.

Hussain, Zuhailawati and Yusoff, Mahani (2011) In-situ formation of NbC in mechanically alloyed Cu-Nb-C At different temperatures. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

J

Jana, R K (2008) NML's Activities on Non-ferrous Metals Extraction. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Jana, R K and Gorai, Bipra and Premchand, (1998) Processing of dust materials from Indian copper plants. In: UNSPECIFIED.

Jana, R K and Randhawa, N S (2009) Production of Silicomanganese Alloy from Low Manganese Containing Leached Sea Nodules Residue. In: The Eighth (2009) ISOPE Ocean Mining Symposium, September 20-24, 2009, Chennai, India.

Jha, Amrita kumari and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Review on e-waste recycling scenario and development of eco-friendly processes at CSIR-NML. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Jha, Amrita Kumari and Jha, Manis K and Kumar, Vinay and Sahu, Rina (2013) Recovery of neodymium as value added product NdF3 from rare earth magnet. In: Proceedings of the XIII lnternational Seminar on Mineral Processing Technology (MPT-20 I 3), 10/12/2013 to 12/12/2014, CSIR-IMMT, Bhubaneswar.

Jha, Amrita Kumari and Jha, Manis K and Kumari, Anjan and Sahu, S K and Kumar, Vinay and Pandey, B D (2013) Selective separation and recovery of cobalt from leach liquor of discarded Li-ion batteries using thiophosphinic extractant. Separation and Purification Technology, 104 (IF-2.921). pp. 160-166.

Jha, Manis K (2022) Business opportunities to reclaim metals by urban mining. Journal of Metallurgy and Materials Science, 64(1-2) .

Jha, Manis K (2012) Status of E-waste Recycling in India and Developing Recycling Processes at CSIR-NML, India. In: Electronics Recycling Asia-2012, November 13 - 16, 2012, Guangzhou, China.

NML (2004) A process for the extraction of zinc from zinc waste effluent. 1869DEL2004.

Jha, Manis K and Choubey, Pankaj K and Dinkar, Om Shankar and Panda, Rekha and Kumar, J Rajesh and Yoo, Kyoungkeun and Park, Ilhwan (2021) Recovery of Rare Earth Metals (REMs) from Nickel Metal Hydride Batteries of Electric Vehicles. Minerals .

Jha, Manis K and Choubey, Pankaj K and Jha, Amrita Kumari and Kumari, Archana and Lee, Jae-chun and Kumar, Vinay and Jeong, Jinki (2012) Leaching studies for tin recovery from waste e-scrap. Waste Management, 32(10) (IF-2.428). pp. 1919-1925.

Jha, Manis K and Choubey, Pankaj K and Kumari, Archana and Kumar, Rakesh and Kumar, Vinay and Lee, Jae-chun (2011) Leaching of lead from solder material used in electrical and electronic equipment. In: Proceedings of second symposium on Recycling of waste II, 2011, Recycling of waste II.

Jha, Manis K and Gupta, Divika and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2014) Solvent extraction of copper, zinc, cadmium and nickel from sulfate solution in mixer settler unit (MSU). Separation and Purification Technology, 122 (IF-3.065). pp. 119-127.

Jha, Manis K and Gupta, Divika and Lee, Jae-Chun and Kumar, Vinay and Jeong, Jinki (2014) Solvent extraction of platinum using amine based extractants in different solutions: A review. Hydrometallurgy, 142 (IF-2.224). pp. 60-69.

0140NF2013 (2014) A process for the recovery of rare earth metals yttrium, lanthanum, terbium & europium from scrap fluorescence tube. .

1660DEL2013 (2013) A process for the recovery of neodymium as a value added product from waste hard disk of personal computers. 0086NF2012.

Jha, Manis K and Kumar, Abhishek and Kumar, Vinay and Lee, Jae-chun (2011) Prospective scenario of e-waste recycling in India. In: Proceeding of Second Symposium On Recycling of Electronic Waste II, 2011, Recycling of waste II.

Jha, Manis K and Kumar, Vinay and Bagchi, D and Singh, R J and Lee, Jae-chun (2006) Recycling of rayon industry effluent for the recovery and separation of Zn/Ca using Thiophosphinic extractant. In: Proceeding of spring meeting and 27th conference, May, 2006, KIGAM.

Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Review on solvent extraction of cadmium from various solutions. Hydrometallurgy, 111-112 (IF-2.027). pp. 1-9.

Jha, Manis K and Kumar, Vinay and Lee, Jae-chun (2007) Processing of electroplating effluent for the recovery of zinc and chromium using ion exchange technique. In: Proceedings of International Symposium of resource recycling, 2007, resource recycling.

Jha, Manis K and Kumari, Archana and Choubey, Pankaj K (2010) E-waste recycling: alternative metal resources. Mineral and Metal Review (5). pp. 50-53.

Jha, Manis K and Kumari, Archana and Choubey, Pankaj K and Lee , Jae-chun and Kumar, Vinay and Jeong, Jinki (2012) Leaching of lead from solder material of waste printed circuit boards (PCBs). Hydrometallurgy, 121–124 (IF-2.027). pp. 28-34.

Jha, Manis K and Kumari, Archana and Panda, Rekha and Choubey, Pankaj K and Gupta, Rajesh (2020) Recycling of EV Li-ion batteries to reclaim valuable metals/ materials. In: National Symposium on “Opportunities and Challenges in Materials for Energy Generation and Storage for Electric Vehicles”, 3-4 January 2020, Pune, Maharashtra.

Jha, Manis K and Kumari , Anjan and Jha, Amrita Kumari and Kumar, Vinay and Hait, Jhumki and Pandey, B D (2013) Recovery of lithium and cobalt from waste lithium ion batteries of mobile phone. Waste Management, 33(9) (IF-2.485). pp. 1890-1897.

Jha, Manis K and Lee, Jae-chun and Kim, Min-seuk and Jeong, Jinki and Kim, Byung-Su and Kumar, Vinay (2013) Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review. Hydrometallurgy, 133 (IF-2.027). pp. 23-32.

Jha, Manis K and Lee, Jae-chun and Kumari, Archana and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki (2011) Pressure leaching of metals from waste Printed Circuit Boards using sulphuric acid. Journal of Metals, 63 (8). pp. 29-32.

Jha, Manis K and Shivendra, and Kumar, Vinay and Pandey, B D and Kumar, Rakesh and Lee, Jae-chun (2010) Leaching studies for the recovery of metals from the waste printed circuit boards (PCBs). In: Proceedings of TMS-2010, Feb 2010.

Jha, Manis K and Upadhyay, R R and Lee, Jae-chun and Kumar, Vinay (2006) Recycling of zinc from textile effluent using ion-exchange process. Proceedings of Fall meetings and 28th conference . pp. 67-71.

Joshi, Ritika Sadanand and Choubey, Pankaj K and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Extraction and recovery of nitric acid and copper from leach liquor of waste PCBs. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Jun, Minji and Kumar, Vinay and Jha, Manis K (2013) Recovery of Indium from scrap LCD monitors. Training Report (TR). CSIR-NML. (Submitted)

Jun, Sang Hee and Jha, Manis K and Hait, Jhumki and Sahu, S K (2013) Rare earth characterizations & processing for the metal La recovery. Training Report (TR). CSIR-NML. (Unpublished)

Jung, Kyung Bae (2012) Recovery of rare metals from e-waste using mechanical pre-treatment and hydrometallurgical techniques. Masters thesis, CSIR-National Metallurgical Laboratory.

K

Kalamani Bawkar, Shilpa and Hait, Jhumki and Choubey, Pankaj K and Panda, Rekha and Singh, Pramod Kumar and Jha, Manis K (2022) Reclamation of Copper from Electronic Industry Effluent Using Plant Root Adsorbent. Journal of Metallurgy and Materials Science, 64(1-2) .

Kale, B B and Kulkarni, S S and Gokarn, A N (1998) Conversion of Natural Resources through Waste reduction at the Processing Step by Briquetting Technique. In: UNSPECIFIED.

Kalinkin, A K (2011) Mechanosorption of Co2 by silicates: mechanism, kinetics and possible applications. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kalinnikov, V T and Krasheninnikov, O N and Belogurova, T P (2011) Mining waste utilization in the production of building materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kaloshkin, S D and Ergin, K S and Tcherdyntsev, V V and Maksimkin, A V and Petrzhik, M I and Antipov, E M and Gerasin, V A (2011) Structure and propertties of ball milled utrahigh-molecular weight Polyethylene - clay composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kaloshkina, Sergey and Romankov, Sergey and Komarov, Sergey and Kaevitser, Ekaterina (2011) Intermetallic coatings produced by mechanical alloying method. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Karuppiah, M T and Bhaskar Raju, G (2009) Anodic Degradation of CI Reactive Blue 221 Using Graphite and IrO2/TaO2/RuO2 Coated Titanium Electrodes. Industrial & Engineering Chemistry Research, 48 (4). pp. 2149-2156.

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) An overview on different processes for recovery of valuable metals from tungsten carbide scrap. In: International Conference on Nonferrous Minerals and Metals (ICNFMM), July 2014, Nagpur.

Keekan, Kishore and Jalondharaa, J Chhaganbhai and Abhilash, (2017) Extraction of Ce and Th from Monazite Using REE Tolerant Aspergillus niger. Mineral Processing and Extractive Metallurgy Review, 38(5) (IF-1.219). pp. 312-320.

Ketegenov, T and Urakaev, F (2011) Influence of thickness of coated layer on parameters and kinetics of mechanical activation (example of quartz processing). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Jeong, Jinki and Pandey, B D (2011) Leaching kinetics of copper from waste printed circuit boards by electro-generated chlorine in HCl solution. Hydrometallurgy, 107 (3-4). pp. 124-132.

Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Pandey, B D (2011) Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process. Journal of Hazardous Materials, 198 . pp. 206-215.

Konar, J and Kumari , S and Das, S and Ranjan, Rajeev (2018) Analysis of major and trace elements of electronic waste materials using microwave digestion and AAS, ICP techniques. Journal of Metallurgy and Materials Science, 60(1) . pp. 21-24.

Konstanchuk, I and Gerasimov, K and Bobet, J -L (2011) Mechanically alloyed magnesium-based materials For hydrogen storage. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kosenko, N and Vinogradova, L and Filatova, N and Smirnova, M (2011) The mechanical treatment as a method of Inorganic substances passive. In: International Conference on Mechanochemistry and Mechanical Alloying, 1-4 December 2008, CSIR-NML, Jamshedpur.

Kulikova, M P and Kaminskii, Yu D (2011) Influence of mechanical activation on alkylation and extractability of coal. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Abhishek and Jha, Manis K and Kumar, Vinay (2009) Leaching of Pb and Sn from the resin of Waste Electrical and Electronic Equipment (WEEE) accessories. Training Report (TR). www.nmlindia.org, Jamshedpur. (Unpublished)

Kumar, Abhishek and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Solvent extraction: a potential tool for the separation of metals from leach liquor of electronic scraps. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Ashish and Singh, V P and Mallik, A and Sahoo, Biraj K and Singh, R C and Chaudhary, R (2024) The utilization of agricultural and industrial waste in the synthesis of AA7075-based novel lightweight composite. Journal of Materials Science .

Kumar, M S and Sulthan, K R and Vasumathi, N and Kumari, Ajita and Vijaya Kumar, T V and Chinthapudi, E and Basu, S and Thorat, B N (2023) Flotation of Low-Grade Graphite Ore Using Collector Derived from Low-Density Polyethylene Waste. In: 74th Annual Indian Chemical Engineering Congress of Indian-Institute-of-Chemical-Engineers (CHEMCON), DEC 26-30, 2021, CSIR Inst Minerals & Mat Technol, Bhubaneswar, INDIA.

Kumar, Manoj and Kumar, Vinay (2008) Solvent Extraction/ion Exchange for Metal Separation and Recovery. In: Proceedings on Extraction on Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Kumar, Manoj and Sau, D C and Nishant, P and Bhattacharya, Maitreyee (2013) Reduction of Ammonium Paratungstate Generated During Hydrometallurgical Processing of Copper-Tungsten(W-Cu) Borings. In: 17 th International Conference on Non-ferrous Minerals and Metals 2013, 5-6 July, 2013, Ranchi.

Kumar, Raj and Jha, Manis K and Kumar, Vinay (2011) Solvent Extraction of Cu/Li from the Leach Liquor of Spent Batteries of used Electronic devices. Training Report (TR). National Metallurgical Laboratory, Jamshedpur. (Unpublished)

Kumar, Rakesh and Alex, T C and Jha, Manis K and Khan, Z H and Mahaptra, S P and Mishra, C R (2004) Mechanochemistry and the Bayer process of alumina production. In: LIGHT METALS 2004. TMS (The Minerals, Metals and Materials Society), pp. 31-34. ISBN 978-0-470-95294-8

Kumar, Rakesh and Alex, T C and Khan, Z H and Mahapatra, S P and Mehrotra, S P (2005) Mechanical activation of bauxite - €”potential and prospects in the Bayer process. In: LIGHT METALS 2005. TMS (The Minerals, Metals and Materials Society), pp. 77-9. ISBN 0873395808, 9780873395809

Kumar, Rakesh and Kumar, Sanjay and Alex, T C and Srikanth, S and Mehrotra, S P (2010) Process innovations using mechanical activation of minerals and wastes. In: Experimental and theoretical studies in modern mechanochemistry. Transworld Research Network, Trivandrum, pp. 255-272. ISBN 978-81-7895-454-7

Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2011) Mechanical activation in blended cement processing. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Rakesh and Srivastava, J P and Premchand, (1998) Utilization of iron values of red mud for metallurgical applications. In: Environmental and Waste Management (ISSN : 0971-9407). National Metallurgical Laboratory, Jamshedpur, India, Jamshedpur, India, pp. 108-119.

Kumar, Sanjay and Das, U S and Singh, K K and Ramachandrarao, P (1998) Development of ceramic floor and wall tiles from fly ash. In: UNSPECIFIED.

Kumar, Sanjay and Kumar, Rakesh and Alex, T C and Bandopadhyay, A and Mehrotra, S P (2007) Influence of reactivity of fly ash on geopolymerisation. Advances in Applied Ceramics, 106 (3). pp. 120-127.

Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A and Mehrotra, S P (2007) Novel geopolymeric building materials through synergistic utilisation of industrial waste. In: International conference alkali activated materials: research, production and utilization, 2007, Prague.

Kumar, Sanjay and Kumar, Rakesh and Mehrotra, S P (2011) Geopolymers, fly ash reactivity and mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Sanjay and Singh, K K and Das, S K and Ramachandrarao, P (2002) Waste Utilisation : Towards Cleaner Environment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Kumar, Vinay and Jha, Manis K and Kumar, Manoj and Jeong, Jinki and Lee, Jae-chun (2010) Extraction of copper from sulfate leach solution containing minor metallic constituents in mixer settler unit. EPD Congress (TMS) . pp. 413-420.

Kumar, Vinay and Jha, Manis K and Kumari, Archana and Panda, Rekha and Kumar, J Rajesh and Lee, J Y (2014) Recovery of rare earth metals (REMs) from primary and secondary resources: a review. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Kumar, Vinay and Kumar, Manoj and Bagchi, D and Jha, Manis K and Jeong, Jinki and Lee, Jae-chun (2007) Solvent Extraction Studies for Removal of Hazardous Metals from the Sulfate Leach Solution of Electronic Wastes. Proceedings of International Symposium of resource recycling . pp. 138-143.

Kumar, Vinay and Lee, Jae-chun and Jeong, Jinki and Shin, Doyun and Jha, Manis K and Kumar, Vinod (2012) Enrichment of valuable metals from end-of-life printed circuit boards using mechanical recycling techniques. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Kumar, Vinod and Kumari , Anjan and Jha, Manis K and Vidyadhar, A and Soni, B K (2014) Recycling of valuable metals from poly cracker ash of printed circuit boards (PCBS) by physical beneficiation and hydrometallurgical treatment. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Kumar, Vinod and Lee, Jae-chun and Jeong, Jinki and Jha, Manis K and Kim, Byung-Su and Singh, Ratnakar (2013) Novel physical separation process for eco-friendly recycling of rare and valuable metals from end-of-life DVD-PCBs. Separation and Purification Technology, 111 (IF-2.921). pp. 145-154.

Kumar, Vinod and Lee, Jae-chun and Jeong, Jinki and Jha, Manis K and Kim, Byung-Su and Singh, Ratnakar (2015) Recycling of printed circuit boards (PCBs) to generate enriched rare metal concentrate. Journal of Industrial and Engineering Chemistry, 21 (IF-2.145). pp. 805-813.

Kumar , Rakesh and Bandopadhyay, A (2002) Clean Technologies in Nonferrous Metals Recycling. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Kumar , Sanjay and Alex, T C and Kumar, Rakesh (2008) Mechanical Activation of Solids in Extractive Metallurgy. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Kumari, Aarti and Sahu, S K and Ranganathan, S (2018) Recovery of mixed rare earth oxide and fine powder of metallic iron from spent NdFeB magnet of wind turbines. In: 22nd International Conference on Nonferrous Minerals and Metals, 6-7th July 2018, Ranchi.

Kumari, Anjan and Jha, Manis K and Lee, Jae-chun and Singh, Rajendra Prasad (2016) Clean process for recovery of metals and recycling of acid from the leach liquor of PCBs. Journal of Cleaner Production, 112( 5) (IF-3.844). pp. 4826-4834.

Kumari, Anjan and Kumar, Vinod and Jha, Manis K and Soni, B K (2013) Processing of poly-cracked ash of printed circuit boards for recovery of valuable and rare metals. In: Proceedings of the XlIl lnternationol Seminar on Mineral Processing Technology (MPT-20I3), 10/12/2013 to 12/12/2013, CSIR-IMMT, Bhubaneswar.

Kumari, Anjan and singh, R P and Jha, Manis K and Kumar, Vinay (2016) Extraction of copper from small electronic devices populated on discarded PCBs. In: Education in Chemical Science and Technology. Indian Chemical Society, Kolkata, pp. 81-91.

Kumari, Anjan and Singh, Rajendra Prasad and Jha, Manis K and Kumar, Vinay (2013) Extraction of copper from small electronic devices populated on discarded PCBs. Journal of Indian Chemical Society , 90 . pp. 2121-2126.

Kumari, Archana and Choubey, Pankaj K and Gupta, Rajesh and Jha, Manis K (2021) Recovery of Lithium (Li) Salts from Industrial Effluent of Recycling Plant. Rare Metal Technology 2021 . pp. 91-100.

Kumari, Archana and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Recovery of lead from the solder of waste printed circuit boards. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumari, Archana and Jha, Manis K and Pathak, D D (2020) An innovative environmental process for the treatment of scrap Nd-Fe-B magnets. Journal of Environmental Management, 273 (IF-5.647). p. 111063.

Kumari, Archana and Jha, Manis K and Pathak, D D (2018) Review on the Processes for the Recovery of Rare Earth Metals (REMs)from Secondary Resources. In: Rare Metal Technology 2018, The Minerals, Metals & Materials Series, https://doi.org/10.1007/978-3-319-72350-1_5. The Minerals, Metals & Materials Society 2018, pp. 53-65.

Kumari, Archana and Jha, Manis K and Pathak, D D and Chakravarty, S and Lee, Jae-chun (2018) Processes developed for the separation of europium (Eu) from various resources. Separation & Purification Reviews - (formerly Separation and Purification Methods) (IF-4.212). pp. 1-31.

Kumari, Asha and Jha, Manis K and Kumar, Vinay (2010) A Novel technique Pulse Sieve Plate Column: Prospect of its utilization for solvent extraction of copper from sulfate solution. Training Report (TR). National Metallurgical Laboratory, Jamshedpur. (Unpublished)

Kumari, Manorama (2011) Studies on isolation of micro-organisms from soil sample and their tolerance with metal ions. Masters thesis, National Metallurgical Laboratory (NML).

Kumari, Puja (2009) Biosorption of Cr(III) using native fungal species isolated from tannery effluents. Masters thesis, National Metallurgical Laboratory (NML).

Kundu, D K and Barman, R K (2002) Coke Oven Emission Standards - A Comparative Assessment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Kundu, Rajen and De, Suranjan (2021) Characterization and analysis of the triglyceride transesterification process. Biomass Conversion and Biorefinery (4.987).

Kundu, Rajen and Mahada, Pushpa and Chhirang, Bhawna and Das, Bappaditya (2022) Cellulose hydrogels: Green and sustainable soft biomaterials. Current Research in Green and Sustainable Chemistry .

L

Lahiri, A K and Aggarwal, Kajal (2002) Clean Technology : Limit and Limitation. In: Clean Technologies for Metallurgical Industries (EWM - 2002), 24-25 January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur.

Lakshmi Kruthika, N and Bhaskar Raju, G and Prabhakar, S (2013) Degradation of Tannic Acid Using Tio2 Nanotubes as Electrocatalyst. International Journal of Nanoscience (ijn) . pp. 481023-481031.

Lakshmipathiraj, P and Bhaskar Raju, G and Sakai, Y and Takuma, Y and Yamasaki, A and Kato, S and Kojima, T (2012) Studies on electrochemical detoxification of trichloroethene (TCE) on Ti/IrO2–Ta2O5 electrode from aqueous solution. Chemical Engineering Journal , 198-199 . pp. 211-218.

Lee, Jae-chun and Jha, Manis K and Panda, Rekha and Choubey, Pankaj K and Kumari , Archana and Kim, Tai Gyun (2021) Developing Feasible Processes for the Total Recycling of WEEE to Recover Rare Metals. Rare Metal Technology 2021 . pp. 197-209.

Lee, Jae-chun and Kim, Eun-young and Kim, Ji-Hye and Kim, Wonbaek and Kim, Byung-Soo and Pandey, B D (2011) Recycling of WC–Co hardmetal sludge by a new hydrometallurgical route. International Journal of Refractory Metals and Hard Materials, 29 (3). pp. 365-371.

Lee, Jae-chun and Pandey, B D (2012) Bio-processing of solid wastes and secondary resources for metal extraction – A review. Waste Management, 32 . pp. 3-18.

Lee, Jun Seop and Sahu, S K and Hait, Jhumki and Jha, Manis K and Kumar , Vinod (2012) Characterization and hydrometallurgical processing of Korean rare earth oxides (REOs) for extraction of rare earth metals. Training Report (TR). www.nmlindia.org, Jamshedpur. (Submitted)

Lee, Kwang Seok (2011) Recovery of rare earth metal neodymium (Nd) as value added product from scrap hard disc of personal computer (PC). Masters thesis, Korea Maritime University, South Korea.

Lee, Sang-hun and Yoo, Kyoungkeun and Jha, Manis K and Lee, Jae-chun (2015) Separation of Sn from waste Pb-free Sn–Ag–Cu solder in hydrochloric acid solution with ferric chloride. Hydrometallurgy, 157 (IF-1.933). pp. 184-187.

Linol, Julie and Martinetto, Pauline and Anne, Michel and Coquerel, Gérard (2011) On the existence of a dynamic critical point by using wet milling on (±) modafinil. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

M

Madhuri, S (2009) Studies on adaptive tolerance of aspergillus niger and penicillium species on hexavalent chromium and its applications in biosorption. Masters thesis, National Metallurgical Laboratory (NML).

Malathi, M and Adekunle, Adeleke and Odusote, J K and Ikubannia, P P and Lasode, O A and Paswan, Dayanand (2020) The Ignitability, Fuel ratio and Ash Fusion Temperatures of Torrefied Woody Biomass. Heliyon, 6/3 (IF-1.65). e03582.

Mandal, G K and Stanford, Nicole and Hodgson, Peter and Beynon, John H (2013) Static recrystallisation study of as-cast austenitic stainless steel. Materials Science and Engineering A, 576 (IF-2.108). pp. 118-125.

Mannar, J E and Muthukrishnan, V (1964) Symposium on utilisation of metallurgical wastes-A review. NML Technical Journal, 6 (2). pp. 7-12.

Mehta, K D and Kumar, Rakesh and Pandey, B D and Mehrotra, S P (2011) Bio-dissolution of metals from activated nodules of Indian Ocean. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mehta, K D and Pandey, B D and Nayak, B and Kumar, Vinod and Upadhyay, A K and Abhilash, (2010) Final Project Report on "Microbial Leaching of uranium from Narwapahar ore". Exploratory (OLP). NML, Jamshedpur. (Submitted)

Mehta, K D and Pandey, B D and Premchand, (1997) Bio leaching of copper, nickel and cobalt from copper converter slag by Thiobacillus Ferroxidens. NML Technical Journal, 39 (2). pp. 59-70.

Meshram, Pratima and Sahu, S K and Sinha, Manish K and Khan, Pritam and Pandey, B D and Mankhand, T R (2010) Solvothermal synthesis of high value copper powder from Copper bleed solution. In: NMD - ATM 2010, 14-16th November 2010, National Science Seminar Complex, Indian Institute of Science, Bangalore.

Meshram, Pratima and Abhilash, (2019) Battery Recycling- Charged with Huge Potential. Material Recycling , 5(2) . pp. 20-22.

Meshram, Pratima and Abhilash, (2023) Material Recycling: Unearthing Metals from Anthropogenic and Industrial Resources. In: New Horizons in Metallurgy, Materials and Manufacturing. Springer, India, pp. 69-89. ISBN 978-981-19-5569-3

Meshram, Pratima and Abhilash, and Pandey, B D (2019) Global Outlook on the Availability of Critical Metals and Recycling Prospects from Rechargeable Batteries. In: Critical and Rare Earth Elements. CRC Press, Boca Raton, US, pp. 37-58. ISBN 978-0367086473

Meshram, Pratima and Abhilash, and Pandey, B D and Mankhand, T R and Deveci, Haci (2018) Extraction of metals from spent lithium ion batteries: role of acid, reductant and process intensification in recycling. 25(4):368-375, 25(4) (IF-0.348). pp. 368-375.

Meshram, Pratima and Abhilash, and Sahu, Rina (2020) Environmental impact of spent lithium-ion batteries and green recycling perspectives by organic acids - A review. Chemosphere, 242 (IF-5.778).

Meshram, Pratima and Ghosh, Anirban and Ramamurthy, Y and Pandey, B D and Abhilash, and Torem, M L (2018) Removal of Cr(VI) from mine effluents by ion exchange resins-comparative study of Amberlite IRA 400 And IRA 900. Russian Journal of Nonferrous Metals . (In Press)

Meshram, Pratima and Kumari, Jyotsna and Abhilash, and Pandey, B D (2014) Extraction of V2O5 from Bayer’s Sludge - An Overview. In: Int Bauxite,Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, INDIA.

Meshram, Pratima and Pandey, B D and Abhilash, (2019) Perspective of availability and sustainable recycling prospects of metals in rechargeable batteries – A resource overview. Resources Policy, 60 . pp. 9-22.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2014) Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: A comprehensive review. Hydrometallurgy, 150 (IF-2.224). pp. 192-208.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Hydrometallurgical processing of spent lithium ion batteries (LIBs) in the presence of a reducing agent with emphasis on kinetics of leaching. Chemical Engineering Journal, 281 (IF-4.321). pp. 418-427.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Leaching of base metals from spent Ni–metal hydride batteries with emphasis on kinetics and characterization. Hydrometallurgy, 158 (1.933). pp. 172-179.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2016) Process optimization and kinetics for leaching of rare earth metals from the spent Ni–metal hydride batteries. Waste Management, 51 (IF-4.030). pp. 196-203.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Recovery of valuable metals from cathodic active material of spent lithium ion batteries: Leaching and kinetic aspects. Waste Management, 45 (IF-3.220). pp. 306-313.

Meshram, Pratima and Prakash, Uday and Bhagat, Lalit and Abhilash, and Zhao, Hongbo and van Hullebusch, Eric D (2020) Processing of Waste Copper Converter Slag Using Organic Acids for Extraction of Copper, Nickel, and Cobalt. Minerals, 10(3) (IF-2.380). p. 290.

Meshram, Pratima and Purohit, Bijoy Kumar and Sinha, Manish K and Sahu, S K and Pandey, B D (2015) Demineralization of low grade coal – A review. Renewable and Sustainable Energy Reviews, 41 (IF-5.510). pp. 745-761.

Meshram, R B and Kumar, Sanjay (2021) Comparative life cycle assessment (LCA) of geopolymer cement manufacturing with Portland cement in Indian context. International Journal of Environmental Science and Technology .

Mishra, D and Perumal, A and Srinivasan, A (2011) Composition dependent properties of mechanically alloyed amorphous Fe-Zr-B powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mishra, D and Sinha, S and Sahu, K K and Agrawal, A and Kumar, R (2017) Recycling of Secondary Tungsten Resources. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 479-485.

Misra, V N (2002) Development of Waste Management Culture. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Mondal, B N and Basumallick, A and Chattopadhyay, P P (2011) The magnetic behavior of Cu-Ni-Co-Fe quaternary alloys prepared by Mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Moon, Gyeonghye and Park, Hongki and Yoo, Kyoungkeun and Jha, Manis K and Alorro, Richad Diaz and Kim, Ju Yup (2015) The Determination of Chemical Forms of Heavy Metals in Shooting Area Contaminated Soil Using Sequential Extraction Method. Journal of Soil and Groundwater Environment, 20(6) . pp. 111-116.

Mukherjee, T K and Patra, R N (1998) Status of Waste Treatment in Titanium Mineral Industries. In: UNSPECIFIED.

Mukhopadhyay, N K (2011) Synthesis of nanocrystalline and amorphous phases in complex metallic alloys during mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mulas, G and Delogu, Francesco (2011) Estimation of mechanochemical effects in heterogeneous processes. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Murugananthan, M and Bhaskar Raju, G (2012) Removal of organic dyes and tannins by electrochemical techniques. In: Photo-Electrochemistry & Photobiology for the sustainability. Union Press, Japan, pp. 123-152.

Muthukumar, M and Karuppiah, P T and Bhaskar Raju, G (2007) Electrochemical removal of CI Acid orange 10 from aqueous solutions. Separation and Purification Technology, 55 (2). pp. 198-205.

N

Nath, S K (2020) Fly ash and zinc slag blended geopolymer: Immobilization of hazardous materials and development of paving blocks. Journal of Hazardous Materials, 387 (IF-9.038). p. 121673.

Nath, S K (2018) Geopolymerization behavior of ferrochrome slag and fly ash blends. Construction and Building Materials, 181 (IF-3.485). pp. 487-494.

Nath, S K (2020) Reaction Kinetics of Fly Ash Geopolymerization by Analyzing Calorimetry Data. In: Geopolymers. Central West Publishing.

Nath, S K and Kumar, Sanjay (2020) Role of particle fineness on engineering properties and microstructure of fly ash derived geopolymer. Construction and Building Materials, 233 (IF-4.046). p. 117294.

Nath, S K and Maitra, S and Mukherjee, S and Kumar, Sanjay (2015) Microstructural evolution of fly ash geopolymer: effect of alkali concentration. In: 78th Annual Session of Indian Ceramic Society, 2-3rd February, 2015, Jamshedpur.

Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2014) Ambient and Elevated Temperature Geopolymerization Behaviour of Class F Fly Ash. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 126-132.

Nguyen, N V and Jeong, Jinki and Jha, Manis K and Lee, Jae-chun and Osseo-Asare, Kwadwo (2010) Comparative studies on the adsorption of Au(III) from waste rinse water of semiconductor industry using various resins. Hydrometallurgy, 105 (1-2). pp. 161-167.

Nguyen, N V and Jeong, Jinki and Shin, Doyun and Kim, Byung-Su and Lee, Jae-chun and Pandey, B D (2012) Simultaneous Recovery of Gold and Iodine from the Waste Rinse Water of the Semiconductor Industry Using Activated Carbon. Materials Transactions, 53 (4). pp. 760-765.

Nguyen, N V and Lee, Jae-chun and Kim, Soo-kyoung and Jha, Manis K and Chung, Kang-Sup and Jeong, Jinki (2010) Adsorption of gold(III) from waste rinse water of semiconductor manufacturing industries using Amberlite XAD-7HP resin. Gold Bulletin, 43 (3). pp. 200-208.

Nguyen, Viet Tu and Lee, Jae-chun and Jeong, Jinki and Kim, Byung-Su and Pandey, B D (2015) The Separation and Recovery of Nickel and Lithium from the Sulfate Leach Liquor of Spent Lithium Ion Batteries using PC-88A. Korean Chemical Engineering Research, 53(2) (IF-1.166). pp. 137-144.

Nijhawan, B R (1964) Research and development work on the utilisation of metallurgical wastes at the National Metallurgical Laboratory. NML Technical Journal, 6 (1). pp. 50-59.

O

Odusote, Jamiu and Adekunle, Adeleke and Olumuyiwa, Lasode and Malathi, M and Paswan, Dayanand (2019) Optimization of Torrefaction Parameters for High Energetic Yields. In: 11th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing, September 29-October 3, 2019, Portland, Ore.

Ogundele, Damilola and Ogundiran, Mary B and Babayemi, Joshua O and Jha, Manis K (2020) Material and Substance Flow Analysis of Used Lead Acid Batteries in Nigeria: Implications for Recovery and Environmental Quality. Journal of Health and Pollution, 10(27) (IF-0.37). pp. 1-12.

Ogundiran, M B and Kumar, Sanjay (2015) Synthesis and characterisation of geopolymer from Nigerian Clay. Applied Clay Science, 108 (IF-2.703). pp. 173-181.

P

Padmanabhan, K A and Prabu, S Balasivanandha (2011) Ultrafine grained materials through mechanical processing: An assessment. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2009) Development of Fluxed Iron Oxide Pellets for Steel Making Utilizing Waste Materials. In: NMD-ATM 2009, November 14-17, 2009, Kolkata.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2010) Refining of hot metal utilizing fluxed iron oxide pellets. In: NMD-ATM 2010, 14-16 Nov, 2010, IISC, Bangalore.

Pal, J and Venugopalan, T and Ghorai, S and Goswami, M C and Prakash, S and Konar, J and Singh, D P (2013) Studies on pellet-sinter composite agglomeration for blast furnace ironmaking. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Palaniandy, Samayamutthirian and Azizli, Khairun Azizi Mohd and Hussin, Hashim and Hashim, Syed Fuad Saiyid (2011) Changes in the structure of talc by continuous jet milling in relation to imposed specific kinetic energy. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Pallavi, Pushpa and Abhilash, (2009) Microbial Isolation Studies and its Implication in Biosorption of Chromium. Training Report (TR). NML, NML, Jamshedpur.

Panda, Rekha and Dinkar, Om Shankar and Kumari, Archana and Gupta, Rajesh and Jha, Manis K and Pathak, D D (2021) Hydrometallurgical processing of waste integrated circuits (ICs) to recover Ag and generate mix concentrate of Au, Pd and Pt. Journal of Industrial and Engineering Chemistry, 93 (IF-5.278). pp. 315-321.

Panda, Rekha and Jha, Manis K and Lee, Jae-chun and Pathak, D D (2021) Developed Commercial Processes to Recover Au, Ag, Pt, and Pd from E-waste. Rare Metal Technology 2021 . pp. 115-126.

Panda, Rekha and Jha, Manis K and Pathak, D D (2018) Commercial Processes for the Extraction of Platinum Group Metals (PGMs). In: Rare Metal Technology 2018, The Minerals, Metals & Materials Series, https://doi.org/10.1007/978-3-319-72350-1_11. The Minerals, Metals & Materials Society 2018, pp. 119-130.

Panda, Rekha and Kumari, Archana and Hait, Jhumki and Sahu, S K and Jha, Manis K and Kumar, Vinay and Kumar, J Rajesh and Lee, Jin-Young (2012) Leaching of Korean monazite for the recovery of rare earth metals. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Panda, Rekha and Kumari, Archana and Jha, Manis K and Pathak, D D (2017) Recuperation of gold from waste printed circuit boards of small electronic devices. Journal of Metallurgy and Materials Science, 59 (4). 181-187.

Panda, Rekha and Parween, Rukshana and Singh, Nityanand and Yoo, Kyoungkeun and Jyothi, Rajesh Kumar and Jha, Manis K (2022) Scrap computer keyboards a sustainable resource for silver (Ag) and low density oil (L D Oil). Sustainable Materials and Technologies .

Panda, S and Devi, N and Sahu, S K (2023) Recent trends in eco-sustainable recycling of energy-critical elements from low-grade and secondary resources. Environmental Science and Pollution Research .

Pandey, B D and Abhilash, and Meshram, Pratima (2019) An overview of the recent status of critical and strategic metal production and development in India. In: Critical and Rare Earth Elements. CRC Press, Boca Raton, US, pp. 1-36. ISBN 978-0367086473

Pandey, B D and Kumar, Vinay and Mehta, K D and Abhilash, (2007) Final Project Completion Report For CORE-0020 Project (under CSIR's Tenth Five Year Plan: 2002-2007). Grant in Aid (GAP). NML, Jamshedpur. (Submitted)

Pandey, B D and Kumar, Vinay and Mehta, K D and Sahu, S K and Abhilash, (2007) Project Completion Report for the Network Project entitled Treatment/Bioremediation of Electroplating and Leather Tanning Effluents Containing Chromium COR – 008 (ILP – 013) {A Network Project of CSIR, New Delhi under Xth Five Year Plan}. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Parbat, R N (1998) Environmental and Waste management in Non-ferrous Metallurgical Industries - Critical issues. In: UNSPECIFIED.

Park, Hong Ki (2011) Extraction of cobalt and lithium from waste lithium ion batteries of mobile phones. Masters thesis, Korea Maritime University, South Korea.

Park Kyung-Ho, Nam Chul-Woo, Mishra Devabrata (2010) Leaching method of valuable metals from synthetic matte. 10-0999194/01.12.2010.

Park, Yujin and Eom, Yuik and Yoo, Kyoungkeun and Jha, Manis K (2021) Leaching of Copper from Waste-Printed Circuit Boards (PCBs) in Sulfate Medium Using Cupric Ion and Oxygen. Metals, 11(9) .

Patel, Bhargav C and Sinha, Manish K and Tipre, D R and Abhilash, and Dave, S R (2014) A novel biphasic leaching approach for the recovery of Cu and Zn from polymetallic bulk concentrate. Bioresource Technology, 157 (IF-5.039). pp. 310-315.

Patra, P and Nagaraju, D R and Somasundaran, P (2011) Impact of pulp rheology on selective recovery of value minerals from ores. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Pradhan, J and Das, S N and Thakur, R S (1998) Use of activated Red Mud for removal of Phosphate and Selenite from Aqueous Solutions. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 155-162. ISBN 81-87053-28-7

Pramanik, S and Sinha, Manish K and Kumari, Aarti and Jha, Manis K and Sahu, S K (2016) Recovery of Rare Earth Oxide from Phosphor Powder of Spent Fluorescent Lamp. In: Hydrometallurgy Conference 2016: Sustainable Hydrometallurgical Extraction of Metals, 1–3 August 2016, Cape Town, South Africa.

Pramanik, Swati and Kumari, Aarti and Sinha, Manish K and Munshi, B and Sahu, S K (2023) Valorization of phosphor powder of waste fluorescent tubes with an emphasis on the recovery of terbium oxide (Tb4O7). Separation and Purification Technology, 322 .

Prasad, Sanjay (2010) Environmental Impact on Electronic Waste. In: Electronic Waste, 2010, NML, Jamshedpur.

Prasad, Sanjay (2010) An Examination of the Environmental Impact of Electronic Waste. In: National Seminar on Environmental Management in Metallurgical Industrial, 2010, BHU, Varanasi.

Prasad, Sanjay (2008) Recovery of Chromium from Stainless Steel dust. In: The 23rd International Conference on Solid Waste Technology and Management, March 30 - April 2, 2008, Philadelphia, U.S.A..

Prasad, Sanjay (2013) Recycling of zinc dross to produce electrolytic zinc powder. Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 163-169.

Prasad, Sanjay and Kumar, Manoj (2019) Recovery of Acid and Ferrous Chloride from leach liquor of reduced ilmenite by hydrothermal process. In: APM 2019, 4-5 July, Bangalore.

Prasad, Sanjay and Kumar, Manoj (2019) Utilization of roast reduced ilmenite leach liquor for ferrous chloride production by hydrothermal process. In: International Conference Non Ferrous Minerals and Metals, 12-13 July 2019, Kolkata.

Priya, Jayati and Randhawa, N S and Hait, Jhumki and Bordoloi, N and Patel, J N (2020) High purity copper recycled from smelter dust by sulfation roasting, water leaching and electrorefining. Environmental Chemistry Letters (IF-5.922). pp. 1-7.

Purohit, Bijoy Kumar and Pramanik, Swati and Meshram, Pratima and Sahu, S K and Pandey, B D (2013) Chemical beneficiation of hingula coal. 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 89-93.

Puvvada, G V K and Srikanth, S (1999) Recycling of tungsten based heavy alloy scrap. NML Technical Journal, 40 (1). pp. 21-29.

Q

Qi, Chongchong and Benson, Craig H (2023) Managing Mining and Minerals Processing Wastes_chapter9. In: Managing Mining and Minerals Processing Wastes Concepts, Design, and Applications. Elsevier, Central South University Press, 01-30. ISBN 978-0-323-91283-9

R

Rafiuddin, S and Prasad, S (1997) Utilisation of waste from Jhamarkotra phosphate beneficiation plant, RSMML, Udaipur, Rajasthan. In: Processing of fines: Proceedings of the national seminar, Jan 9-10, 1997. NML, Jamshedpur, pp. 279-284. ISBN 81-87053-25-9

Raj, R and Kumari, Aarti and Sahu, D K and Prasad, R and Ranganathan, S (2019) Carbothermic Reduction of Iron Oxide Waste Generated During the Processing of Ilmenite. Transactions of the Indian Institute of Metals , 72(1) . pp. 11-16.

Ramachandrarao, P (2002) Sustainable Development : Mining and Metals Sectors. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Randhawa, N S and Das, N N and Jana, R K (2013) Adsorptive remediation of Cu(II) and Cd(II) contaminated water using manganese nodule leaching residue. Desalination and Water Treatment, Online (IF-0.825). pp. 1-15.

Randhawa, N S and Das, N N and Jana, R K (2013) Cadmium removal using waste residue generated after recovery of base metals from manganese nodules. Indian Journal of Chemical Technology (0.61). pp. 371-379.

Randhawa, N S and Das, N N and Jana, R K (2012) Selenite adsorption using leached residues generated by reduction roasting–ammonia leaching of manganese nodules. Journal of Hazardous Materials, 241-242 (4.173). pp. 486-492.

Randhawa, N S and Dwivedi, A D and Prajapati, S and Jana, R K (2014) Utilisation of sea nodules leaching residue for adsorption of Ni(II) ions. In: National Seminar on Exploitation of Lean Grade Ore, Ore Fines and Urban Ores: Challenges, Problem and Solutions (LGO-2013), 22-23 January, 2013, CSIR-NML, Jamshedpur.

Randhawa, N S and Dwivedi, D and Prajapati, S and Jana, R K (2013) Application of manganese nodules leaching residue for adsorption of nickel(II) ions from aqueous solution. International Journal of Environmental Science and Technology, Online (IF-1.80). pp. 1-7.

Randhawa, N S and Dwivedi, Deepak and Prajapati, Sonu and Jana, R K (2013) Utilisation of sea nodules leaching residue for adsorption of Ni(II) ions. Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 186-196.

Randhawa, N S and Jana, R K (2013) Different applications of waste generated in reduction roasting – ammonia leaching of manganese nodules. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2013, 12-15 November 2013, IIT-BHU, Varanasi.

Randhawa, N S and Kumari, Aarti and Sahu, S K (2020) Chloridizing Roasting of Spent NdFeB Magnet Using Ammonium Chloride. In: 22nd DAE-BRNS Symposium on Thermal Analysis (Thermans 2020), 30 Jan-01 Feb 2020, BARC (Mumbai).

Ranganathan, S (2008) Extraction of Magnesium, Titanium and Aluminium. In: Proceedings on Extraction on Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

0094NF2014 (2014) An improved process for the pyrolysis of depopulated printed circuit boards (PCBs) of e-waste. 0094NF2014.

Rao, M D and Meshram, Pratima and Abhilash, and Singh, K K (2023) Validation of Bromide Leaching through Response Surface Methodology and Separation of Gold from Waste Printed Circuit Boards. Minerals, 13(4) .

Rao, P V T and Sripriya, R and Mohanty, O N (2002) March Towards Green Steel Production-Efforts at Tata Steel. In: Clean Technologies for Metallurgical Industries (EWM - 2002), 24-25 January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur.

Ray, A C (1998) Sustainable technology through pollution prevention programme. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 87-91. ISBN 81-87053-28-7

Ray, H S (2002) Some Barriers to Clean Technologies. In: Clean Technologies for Metallurgical Industries - (EWM - 2002), 24-25, January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Rayalu, S and Premchand, and Shalini, and Ramachandrarao, P (1997) Characterisation of wastes from processing of sea nodules. NML Technical Journal, 39 (2). pp. 71-76.

Rohatgi, P K and Bowander, B (1972) Potential use of technological forecasting in planning materials research. NML Technical Journal, 14 (4). pp. 141-146.

S

Saha, A K and Kumar, A and Akerkar, D D and Shahani, M J (1971) Utilization of indigenous steel scrap for iron powder production-A study of dissolution rates of scrap in hydrocholoric acid. NML Technical Journal, 13 (4). pp. 93-99.

Saha, A K and Misra, R N and Bhatnagar, P P (1970) Studies on leaching of bulk Ni-Cu-Mo sulphides. NML Technical Journal, 12 (3). pp. 69-73.

Sahu, K K and Agrawal, A (2008) Environmental friendly recycling of electronic waste – A challenge before developing nations. Journal of Metallurgy and Materials Science, 50 (2). pp. 107-118.

Sahu, K K and Agrawal, A (2008) Lead Zinc Extraction Processes. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Sahu, K K and Agrawal, A (2008) Processing of Electronic Waste(E-Waste). In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Sahu, K K and Alex, T C and Mishra, D and Agrawal, A (2006) An overview on the production of pigment grade titania from titania-rich slag. Waste Management & Research, 24 (1). pp. 74-79.

Sahu, K K and Mishra, D and Jha, Manis K and Agrawal, A (2012) Processing of secondaries and wastes for metal extraction. Science and culture, 78 . pp. 504-510.

Sahu, S K (2008) Recent Advances in the Extraction of Copper, Nickel and Cobalt. In: Proceedings on Extraction of Nonferrous Metals and their Recycling, Feb. 27-29th, 2008, NML, Jamshedpur.

Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2010) A comparative performance of two resins based on polysterene for removal of chromium(III) from tannery solution. In: Environmental Management in Metallurgical Industries, March 15-16, 2010, Banars Hindu University, Varanasi.

Samal, S and Chaira, D and Chaira, B (2011) Production and stability of al and cu ultrafine particles in nanofluids. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Sankar, Tapan Kumar and Abhilash, and Meshram, Pratima (2024) Environmental Impact Assessment in the Entire Life Cycle of Lithium‑Ion Batteries. Reviews of environmental contamination and toxicology, 262 (5) (6.9).

Sarangi, B M and Kesav, Babu and Sheshadri, M K (2002) Environmental Control Measures in Sponge Iron Industry with Particualr Reference to Tata Sponge Iron Limited. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Sasikumar, C and Srikanth, S and Kumar, Rakesh and Alex, T C and Mehrotra, S P (2011) Where does the energy go in high energy milling? In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Sastry, P R and Bhandary, V S and Gupte, P K and Nijhawan, B R (1967) Shell moulding with indigenous raw materials. NML Technical Journal, 9 (1). pp. 29-34.

Satapathy, P K and Randhawa, N S and Das, N N (2011) Oxidative decolorization of methylene blue by leached sea-nodule residues generated by the reductionroasting ammoniacal leaching process. Environmental Technology . pp. 1-8.

Senapati, Bimalananda and Kumar, C Satish and Banerjee, Tonmoy (2010) Water management at Vedanta aluminium Ltd., Lanjigarh refinery. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sengupta, B and Kumar, A and Hashim, M A and Ramakanth, C (1998) Nickel and chromium in wastewater - The Malaysian experience. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 27-51. ISBN 81-87053-28-7

Sepelak, V and Bergmann, I and Indris, S and Heitjans, P and Becker, K D (2011) Crystallite size dependent cation distribution in nanostructured spinels studied by nmr, mössbauer spectroscopy and XPS. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Shakhtshneider, T P and Myz, S A and Mikhailenko, M A and Dyakonova, M A and Boldyrev, V V (2011) Mechanochemistry and solubilization of drugs. In: International Conference on Mechanochemistry and Mechanical Alloying, 1-4 December 2008, CSIR-NML, Jamshedpur.

Sharma, Manoj Kumar (1998) Initiatives in Environment Management undertaken by the Small Industries Development Bank of India. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 163-166. ISBN 81-87053-28-7

Sharma, R P and Basu, G S and Prasad, S B and Dhillon, A S (2002) Steel Industry and Climate Change. In: Clean Technologies for Metallurgical Industries (EWM)-2002, 24-25, January, 2002, CSIR- National Metallurgical Laboratory, Jamshedpur.

Singh, K K and Mankhand, T R and Sinha, S N (2010) High temperature treatment of waste printed circuit boards to recover valuable metals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Singh, Krishna (2010) Optimization of parameters for Biosorption of Cr(III) by Aspergillus niger. Masters thesis, National Metallurgical Laboratory (NML).

Singh, S D and Biswas, D K and Mishra, K K and Ramachandrarao, P (1999) Eco-friendly cokeless-cupola. NML Technical Journal, 40 (1). pp. 1-12.

Singh, Shivangini and Mandal, Manas and Mishra, Trilochan and Angayarkanni, A and Veldurthi, N K and Pati, S S (2023) Facile Synthesis of Citric Acid Functionalized Fe3O4@Activated Carbon Magnetic Nanocomposite for Efficient Adsorption of Brilliant Green Dye from Wastewater. Chemistryselect, 8(38) .

Singh , Nityanand and Dinkar, Om Shankar and Choubey, Pankaj K and Panda, Rekha and Jyothi, Rajesh Kumar and Jha, Manis K (2022) Recycling of Nd-Fe-B Magnets to Reclaim Nd Salt and Pigment. Journal of Metallurgy and Materials Science, .

Singla, Rashmi and Kumar, Sanjay and Alex, T C (2019) Reactivity Alteration of Granulated Blast Furnace Slag by Mechanical Activation for High Volume Usage in Portland Slag Cement. Waste and Biomass Valorization . pp. 1-11.

Singla, Rashmi and Kumar, Sanjay and Alex, T C (2020) Reactivity Alteration of Granulated Blast Furnace Slag by Mechanical Activation for High Volume Usage in Portland Slag Cement. Waste and Biomass Valorization, 11 (IF-2.851). pp. 2983-2993.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2010) Extractive separation and recovery of hydrochloric acid and iron values from spent pickle liquor. In: XI International Seminar on Mineral Processing Technology (MPT-2010), 15 - 17 December, 2010, NML, Jamshedpur.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2009) Recovery of acid and iron values from the spent pickle liquor by solvent extraction. In: NMD - ATM 2009, November 14, 2009 to November 17, 2009, Science City Complex,Kolkata, India.

Sinha, Nidhi and Sahoo, K L (2008) Melting and Casting of Non-ferrous Metals and Alloys. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Sinha, S N and Agrawal, M K and Prasad, R B and Singh, K K (2002) Proper Management of Metallurgical Wastes - A Paramount Necessity for clean Environment. In: Clean Technologies for Metallurgical Industries - (EWM - 2002), 24-25, January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Sinha, S N and Agrawal, M K and Saha, R K (1998) Pollution and its Control in Copper Industry. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 185-196. ISBN 81-87053-28-7

Sinha, Shivendra and Abhilash, and Meshram, Pratima and Pandey, B D (2016) Metallurgical processes for the recovery and recycling of lanthanum from various resources—A review. Hydrometallurgy, 160 (IF-2.605). pp. 47-59.

Sinha, Shivendra and De, S and Mishra, D and Shekhar, S and Agarwal, A and Sahu, K K (2021) Phosphonomethyl iminodiacetic acid functionalized metal organic framework supported PAN composite beads for selective removal of La(III) from wastewater: Adsorptive performance and column separation studies. Journal of Hazardous Materials, 425 .

Som, P K and Roychowdhury, S K (1982) Recovery of metal values from industrial wastes. NML Technical Journal, 24(1-2) . pp. 8-11.

Srikanth, S (2011) Processing of Secondaries & Waste. [Presentation Slide] (Unpublished)

Srivastava, Nidhi and Abhilash, (2012) Bacterial Isolates in hexavalent chromium reduction:Applications form synthetic to real systems. Masters thesis, Trident Academy of Creative Technology (Utkal University).

Srivastava, Nidhi and Dhal, B and Abhilash, and Pandey, B D (2014) Bioreduction of hexavalent chromium by Bacillus cereus isolated from chromite mine overburden soil. Advanced Materials Research, 828 . pp. 81-91.

Srivastava, Rajiv Ranjan and Kim, Min-seuk and Lee, Jae-chun and Jha, Manis K and Kim, Byung-Su (2014) Resource recycling of superalloys and hydrometallurgical challenges. Journal of Material Science, 49(14) (IF-2.599). pp. 4671-4686.

Subramanian, C and Suri, A K (1998) Recovery of Niobium and Tantalum from Low Grade Tin Slag - A Hydrometallurgical Approach. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 100-107. ISBN 81-87053-28-7

Subramanian, S and Lahiri, A K (1998) Process Engineering for Pollution Control and Waste Minimisation in Non -Ferrous Metallurgical Industries. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 17-26. ISBN 81-87053-28-7

Sundarapandiyan, S and Raju, G B and Chandrasekaran, B and Saravanan, P (2018) Removal Of Organic Materials From Tannery Wastewater Containing Ammonia For Reuse Using Electro-Oxidation. Environmental Engineering And Management Journal, 17(9) (IF-1.186). pp. 2157-2164.

Surkov, G and Golovko, A K and Lomovsky, O I and Lobanov, J S (2011) Mechanochemical conversion of acetylene in quartz – ultrafine metal powder system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

T

Tcherdyntsev, V V and Kaloshkin, S D and Sudarchikov, V A and Dorofeev, A A and Mochkina, I V and Yuryeva, N V and Danilov, V D (2011) Ball milling effect on the properties of ultra high molecular weight Polyethylene - bronze composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Shevchukov, A P and Sviridova, T A and Kaloshkin, S D (2011) Phase transformations in mechanically alloyed Al-Cu-Cr powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Titova, V Yu and Kaloshkin, S D and Baldokhin, Yu V and Zagainov, A V and Rodin, A O (2011) Structure and magnetic properties of mechanically alloyed Fe3-xAlCrx powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Teremova, M I and Petrakovskaya, E A and Romanchenko, A S and Tuzikov, F V and Gurevich, Yu L and Tsibina, O V and Yakubailik, E K and Abhilash, (2011) Iron-based ultrafine particles made in mode solutions and industrial waste waters. In: The thrid International Congress on Non-Ferrous Metals, September 7-9, 2011, Hrasnoyarsk, Russia.

Thirugnanam, A and Chakravarthi, N. Veera and Chakkingal, Uday and Kumar, T S Sampath (2011) Novel titanium - hydroxyapatite biocomposites By mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME2008), 1-4 December, 2008, CSIR-NML, Jamshedpur.

Tome, Sylvain and Bewa, C N and Nana, Achile and Nemaleu, J G D and Etoh, Marie-Annie and Tchakoute, H K and Kumar, Sanjay and Etame, Jacques (2021) Structural and Physico-mechanical Investigations of Mine Tailing-Calcined Kaolinite Based Phosphate Geopolymer Binder. Silicon .

Tome, Sylvain and Etoh, Marie-Annie and Etame, Jacques and Kumar, Sanjay (2020) Improved Reactivity of Volcanic Ash using Municipal Solid Incinerator Fly Ash for Alkali-Activated Cement Synthesis. Waste and Biomass Valorization, 11 (IF-2.358). pp. 3035-3044.

Tripathy, P K and Shah, V D and Rakhasia, R H and Sehra, J C (1998) Environmental considerations in the selection of metallurgical processes for the extraction of molybdenum from low grade molybdenite concentrate. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 92-99. ISBN 81-87053-28-7

Turianicová, Erika and Baláž, Peter (2011) A possible way to storage carbon dioxide on mechanically activated olivine (Mg,Fe)2SiO4. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

V

Vaish, A K and Singh, S D and Bhattacharya, A P and Ghosh, S B and Singh, O and Basak, A C and Maharaj, Lal and Ramachandrarao, P (1996) Utilisation of waste battery scrap. In: Environmental & waste management in metallurgical industries. NML, Jamshedpur, pp. 177-182.

Vaish, A K and Singh, S D and Ghosh, S B and Singh, O and Bhattacharyya, A P and Maharaj, L and Ramachandrarao, P (1998) A Comprehensive pollution control system for the mitigation of fine particulates of lead and Sox gases from secondary lead smelters. In: Environmental & waste management: in non-ferrous metallurgical industries. NML, Jamshedpur, pp. 225-229. ISBN 0971-9407

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S (2018) Flotation of iron ore washing plant tailings. In: National Conference on Waste to wealth in mining and metallurgical Industries (WWMMI 2018). IMMT Bhubaneswar.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2012) Recovery of values from tailing ponds of iron ore washing plants. In: International Mineral Processing Congress (IMPC - 2012), 24 - 28 September 2012, New Delhi, India.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2016) Removal of lead from waste material containing carbon. In: 20th National Conference on Non-ferrous minerals and metals, 8-9 July 2016, Jamshedpur.

Venkata Siva, S B and Sahoo, K L and Ganguly, R I and Dash, R R and Singh, S K and Satpathy, B K and Srinivasarao, G (2013) Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material. Metallurgical and Materials Transactions B , 44 (IF-1.212). pp. 800-808.

Venugopal, R (2010) Solid waste processing for industrial utilization— a few case studies. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Vidyadhar, A (2014) Recovery of metal values from pre-concentration of coarser size fraction of printed circuit boards by froth flotation. In: TMS 2014, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA.

Vidyadhar, A (2016) A Review of Technology of Metal Recovery from Electronic Waste. In: E-Waste in Transition - From Pollution to Resource. InTech, Croatia, pp. 121-158. ISBN ISBN 978-953-51-2500-6

Vidyadhar, A and Das, Avimanyu (2012) Kinetics And Efficacy Of Froth Flotation For The Recovery Of Metal Values From Pulverized Printed Circuit Boards. In: XXVI International Mineral Processing Congress (IMPC) 2012 , September 24-28, 2012, Hotel Ashok, Diplomatic Enclave, New Delhi.

Vidyadhar, A and Das, Avimanyu (2013) Stratification and segregation features of pulverized electronic waste in flowing film concentration. Journal of Environmental Management, 118 (IF-3.188). pp. 49-54.

Vijayalakshmi, P and Bhaskar Raju, G and Gnanamani, A (2011) Advanced Oxidation and Electrooxidation As Tertiary Treatment Techniques to Improve the Purity of Tannery Wastewater. Industrial & Engineering Chemistry Research, 50 (17). pp. 10194-10200.

Vinh, H H and Lee, Jae-chun and Jeong, Jinki and Huyunh, Trung Hai and Jha, Manis K (2010) Thiosulfate leaching of gold from waste mobile phones. Journal of Hazardous Materials, 178 (1-3). pp. 1115-1119.

Viswanathan, M (1998) Integrated Pollution Control and Waste Management in Copper Base Processing Industries. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 67-78. ISBN 81-87053-28-7

Viswanathan, P V and Gangadharan, T K (1996) Environmental and waste management in iron and steel industry. In: Environmental & waste management in metallurgical industries. NML, Jamshedpur, pp. 199-207.

Viswanathan, P V and Sankaran, C (1998) An Overview of environmental issues and protection measures in Indian non-ferrous plants. In: Environmental & waste management: in non-ferrous metallurgical industries. NML, Jamshedpur, pp. 197-208. ISBN 0971-9407

Viswanathan, P V and Srinivasan, R and Mishra, K K (1996) Waste management perspective in non-ferrous industries. In: Environmental & waste management in metallurgical industries. NML, Jamshedpur, pp. 208-214.

W

Welham, N J and Setoudeh, N (2011) Increasing gas sorption onto carbon by milling with alumina. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Y

Yadav, T P and Mukhopadhyay, N K and Tiwari, R S and Srivastava, O N (2011) Mechanically induced phase transformation in Al-Cu- Fe-Cr decagonal Quasicrystalline alloy by high-energy ball milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Yadav, U S and Das, B K and Kumar, Ashok and Sandhu, H S (2002) Solid Wastes Recyling through Sinter-Status at Tata Steel. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Yariv, S and Lapides, I and Abramova, E (2011) Mechanochemical reactions of clay minerals with CsCl. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Yoon, Ho-Sung and Kim, Chul-Joo and Chung, Kyung Woo and Jeon, Sanghee and Park, Ilhwan and Yoo, Kyoungkeun and Jha, Manis K (2015) The Effect of Grinding and Roasting Conditions on the Selective Leaching of Nd and Dy from NdFeB Magnet Scraps. Metals, 5(3) (IF-0.883). pp. 1306-1314.

Z

Zhang, Yanjun and Zhao, Hongbo and Zhang, Yisheng and Qian, Lu and Zhang, Luyuan and Meng, Xiaoyu and Lv, Xin and Abhilash, and Janjua, Hussnain Ahned and Qiu, Guanzhou (2019) Interactions between marmatite and bornite during the oxidative dissolution process in abiotic and biotic systems. RSC Advances, 9 (IF-3.51). pp. 26609-26618.