Items where Subject is "Corrosion Science"

Annual Reports

Director, NML (2014) Annual Report 2013-2014. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2015) Annual Report 2014-2015. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2016) Annual Report 2015-2016. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2018) Annual Report 2017-2018. CSIR- National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Article

Addanki Rao, S and Mukherjee, K P and Lahiri, A K and Banerjee, T (1963) Corrosion of metals and alloys exposed at Jamshedpur. NML Technical Journal, 5 (3). pp. 18-24.

Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Hussain, Raja Rizwan and Al-Zaid, Rajeh and Singh, J K and Singh, D D N (2014) Role of Manganese Sulfide Inclusions in Steel Rebar in the Formation and Breakdown of Passive Films in Concrete Pore Solutions. Corrosion, 70(1) (IF-2.908). pp. 74-86.

Al-Negheimish, Abdulaziz and Alhozaimy , Abdulrahman and Hussain, R R and Singh, J K and Singh, D D N (2017) Pitting Susceptibility of Concrete Reinforcing Steel Bars Having Manganese Sulfide Inclusions. ACI Materials Journal, 114(3) (IF-1.183). pp. 441-451.

Alhozaimy , Abdulrahman and Hussain, R R and Al-Negheimish, Abdulaziz and Singh, J K (2018) Protection against Reinforcement Corrosion Using Phosphoric Acid-Based Rust Converter. Aci Materials Journal, 115(6) (IF-1.453). pp. 935-944.

Altekar, V A and Singh, Inder and Banerjee, M K and Singh, M N (1982) Relations between the theoretical hydrogen and observed hydrogen in the presence of inhibitors. NML Technical Journal, 24 (3-4). pp. 19-21.

Arora, S M (1990) Hot-Dip Aluminising of Ferrous Materials. NML Technical Journal, 32 (1-4). pp. 29-39.

Arora, S M and Gupte, P K (1967) Feasibility of hot-dip aluminising high-tension transmission tower members. NML Technical Journal, 9 (2). pp. 12-17.

Arthanareeswari, M and Sankara Narayanan, T S N and Kamaraj, P and Tamilselvi, M (2010) Influence of galvanic coupling on the formation of zinc phosphate coating. Indian Journal of Chemical Technology, 17 (3). pp. 167-175.

Bahadur, Aruna (1992) Chromates as Corrosion Inhibitors for Aqueous Systems. Corrosion Reviews, 10 (1-2). pp. 155-178.

Balasubramaniam , R (1995) Studies on the Corrosion resistance of Delhi Iron Pillar. NML Technical Journal, 37 (4). pp. 123-142.

Balusamy, T and Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Corrosion resistant Ti alloy for sulphuric acid medium: Suitability of Ti–Mo alloys. Materials and Corrosion, 62 (1.173 (SCI)). pp. 803-806.

Balusamy, T and Satendra, Kumar and Sankara Narayanan, T S N (2010) Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel. Corrosion Science, 52 . pp. 3826-3834.

Balusamy, T and Satendra , Kumar and Sankara Narayanan, T S N (2011) Electrochemical behaviour of surface modified AISI 304 grade stainless steel in ringer’s solution. Transactions of the Indian Institute of Metals, 64 (4-5). pp. 507-511.

Banerjee, M K and Mukherjee, A N and Mukherjee, K P (1990) Potentiokinetic Behaviour of Copper and Manganese Bearing Stainless Steels. NML Technical Journal, 32 (1-4). pp. 11-17.

Banerjee, T (1966) Role of National Metallurgical Laboratory in corrosion research. NML Technical Journal, 8 (4). pp. 5-10.

Banerjee, T (1969) Theory on mechanism of phase-transformation in electrolytic alloys. NML Technical Journal, 11 (1). pp. 4-5.

Bansal, Rajesh and Singh, J K and Singh, D D N (2013) Deleterious effects of nicotine containing dentifrices on human saliva and teeth: A novel study. Indian Journal of Dentistry, 4(1) . pp. 22-28.

Bansal, Rajesh and Singh, J K and Singh, Vakil and Singh, S D and Das, Parimal (2017) Optimization of Oxidation Temperature for Commercially Pure Titanium to Achieve Improved Corrosion Resistance. Journal Of Materials Engineering And Performance, 26(3) (IF-1.331). pp. 969-977.

Bardgett, W E and Stanners, J F (1963) The Delhi Pillar-A study of the Corrosion Aspects. NML Technical Journal, 5 (1). pp. 24-30.

Basu, D K and Bhattacharjee, A K and Singh, M N (2000) Some observations on environmental corrosion behaviour and electrochemical passivation characteristic of silver-cadmium contact alloys in neutral - saline and alkaline - sour media. Journal of Metallurgy and materials Science., 42 (2). pp. 121-131.

Basu, D K and Khan, D K (1972) Short communication on role of different variables on atmospheric corrosion in marine environment-Effect of proximity to sea. NML Technical Journal, 14 (1). pp. 34-36.

Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N (1972) Utilization of zinc ash for production of electrolytic zinc. NML Technical Journal, 14 (3). pp. 102-104.

Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N and Altekar, V A (1973) Utilization of secondary zinc. NML Technical Journal, 15 (3). pp. 49-58.

Bhagat, R P and Vijaya Kumar, T V (2005) Study on removal of suspended particles and colour impurities from the paint effluent of an automotive industries by adsorption. Journal of Metallurgy and Materials Science, 47 (3). pp. 159-168.

Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Vijayakumar, T V and Vasumathi, N and Suhasini, S and Ashish Kumar, M and Shiva Kumar, S (2015) Evaluation of Flotation Collectors in Developing Zero Waste Technology for Processing Iron Ore Tailings. International journal of Engineering Research, 4(11) ( GIF-0.421). pp. 604-608.

Bhattamishra, A K and Banerjee, M K (2009) Effect of temperatures of corrosive medium on corrosion of a high strength aluminium alloy. Journal of Metallurgy and Materials Science, 51 (1). pp. 43-46.

Bhattamishra, A K and Basu, D K and De, P K and Narang, S K (2004) Corrosion behaviour of carbon steels and aluminium alloys in different media - A comparative study. Journal of Metallurgy and materials Science, 46 (1). pp. 51-59.

Bhattamishra, A K and De, P K and Mandhyan, A and Das, S K (2005) Localised corrosion of 2124SiCp composite. Journal of Metallurgy and Materials Science, 47 (4). pp. 215-222.

Bhattamishra, A K and Lal, Kishori and Nair, G G and Kumar, Rajendra (1987) Corrosion behaviour of overhead aluminium/alloy conductors in industrial and coastal environments. NML Technical Journal, 29 (1-4). pp. 20-24.

Bhattamishra, A K and Singh, Inder and Lal, Kishori and Kumar, Rajendra (1986) Studies on the corrosion behaviour of aluminium alloy conductors in NaCl and Na2SO4 solutions. NML Technical Journal, 28 (1-4). pp. 10-17.

Bhuyan, P and Pradhan, S K and Mitra, R and Mandal, S (2021) Strain-induced microstructural evolution and its implication on high-temperature hot corrosion (HTHC) phenomena in Alloy 617. Materials Characterization, 178 .

Bose, S and Pathak, L C and Singh, R (2018) Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer’s solution for bio-implant application. Applied Surface Science, 433 (IF-3.387). pp. 1158-1174.

Ca, To Duy (1998) Effect of Molybdenum on the Formation of Carbides and Phases Structure of 12Cr20Ni38Mo5-Alloy. NML Technical Journal, 40 (3). pp. 66-76.

Chakrabarti, S and Jha, G and Singh, D D N (2002) Evaluation of Corrosion Behaviour of Corrugated Galvanised Sheets. Tata Search, 2002 . pp. 1-8.

Chakravarty, S and Mohanty, Ashok and Ghosh, B and Tarafder, Mita and Aggarwal, S G and Gupta, P K and Prabhat, K (2014) Proficiency Testing in Chemical Analysis of Iron Ore: Comparison of Statistical Methods for Outlier Rejection. Mapan-Journal of Metrology Society of India, 29(2) (IF-0.477). pp. 87-95.

Chandrasekaran, V and Kannan, K and Natesan, M (2004) Corrosion behaviour of mild steel in phosphoric acid medium with benzotriazole. Journal of Metallurgy and Materials Science, 46 (4). pp. 253-262.

Chattoraj, I (2009) Hydrogen embrittlement: Recent Indian research and perspectives. Corrosion Reviews, sp. Iss.sl suppl . pp. 181-211.

Chidambaram, S and Ashok, K and Karthik, V and Venkatakrishnan, P G (2018) Microbiological corrosion of ASTM SA105 carbon steel pipe for industrial fire water usage. IOP Conference Series: Materials Science and Engineering, 314 (IF 0.32).

Choudhary, Shyam K and Bhadu, Manish Kumar and Guin, Akshya Kumar and Pramanick, A K and Ghosh, Nabarun and Rout, Tapan Kumar and Das, Sumitesh (2013) Boiling Study of Nanofluid on Graphene Coated Substrate. Journal of Nanofluids, 2 . pp. 1-4.

Choudhury, Samrat Sen and Bandyopadhyay, N R and Pramanick, A K and Bhattacharjee, S (2010) Syntheis and characterization of an aqueous nanometric iron hydroxide suspension suitable for the removal of As(III) and As(V). Journal of Metallurgy and Materials Science, 52 (3). pp. 215-229.

Daroonparvara, M R and Mazar Atabaki, M and Vakilipour, A (2011) Corrosion behavior of heat treated nickel-aluminium bronze alloy in artificial seawater. Journal of Metallurgy and Materials Science, 53 (1). pp. 67-84.

Das, G S and Khanna, A S (2005) Role of corrosion product on the protectiveness of corrosion layers for microalloyed pipline steel. Journal of Metallurgy and Materials Science, 47 (1). pp. 39-44.

Das, Swapan K and Munda, Parikshit and Ghosh Chowdhury, S and Das, Goutam and Singh, Raghuvir (2014) Effect of microstructures on corrosion and erosion of an alloy steel gear pump. Engineering Failure Analysis, 40 (IF-1.130). pp. 89-96.

Dey, A K and Singh, Inder and Altekar, V A (1981) Embrittlement of high carbon steel in sulphuric acid containing thio-compounds. NML Technical Journal, 23 (3-4). pp. 27-31.

Dey, A K and Sinha, A K Mahapatra and Khan, D K and Mukherjee, A N and Mukherjee, K P and Banerjee, T and Narain, Raj (1966) Interim report on atmospheric corrosion studies under marine atmosphere. NML Technical Journal, 8 (4). pp. 11-16.

Dey, M L and Singh, Gurdial (1971) Preparation of aluminium fluoride. NML Technical Journal, 13 (2). pp. 58-64.

Dutta, A and Shivaji, T and Ghosh, M and Fernandes, R and De, P K and Nayak, D and Sharma, R (2021) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry & Physics . (In Press)

Dutta, A and Sivaji, T and Ghosh, M and Fernandes, R and De, PS and Nayak, D and Sharma, R (2022) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry and Physics, 276 .

Garai, Subhadra and Jaisankar, Parasuraman and Singh, J K and Elango, Adirajan (2012) A comprehensive study on crude methanolic extract of Artemisia pallens (Asteraceae) and its active component as effective corrosion inhibitors of mild steel in acid solution. Corrosion Science, 60 . pp. 193-204.

Gaur, B and Singh, Raghuvir and Singh, A K (2000) Corrosion of stainless steels in chlorination washer of Indian paper industry. Journal of Metallurgy and materials Science, 42 (2). pp. 113-119.

Ghosh, M K (1963) The Delhi Iron Pillar and its iron. NML Technical Journal, 5 (1). pp. 31-45.

Gupta, J R and Kapoor, A N (1967) Melleabilisation characteristics of white cast iron containing copper under inert atmosphere. NML Technical Journal, 9 (2). pp. 26-31.

Gutpa, K K and Bhattacharjee, S and Sekhar, K C (2001) Determination of Gold by Inductively Coupled Plasma Optical Emission Spectrometry. Geological Survey of India, 58 (Suppl). pp. 487-492.

Haldar, R K and Lahiri, A K (1972) Observations on High Temperature Oxidation Behaviour of Some Fe-Cr-Al alloys. NML Technical Journal, 14 (3). pp. 108-109.

Husain, M M and Meena, L K and Ghosh, M and Prabhu, N (2021) Corrosion at the Weld Nugget of the Friction-Stir-Welded Medium Strength Steel: Effect of Microstructure. Metallurgical and Materials Transactions A .

Hussain, R R and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N (2022) Role of phosphorus as micro alloying element and its effect on corrosion characteristics of steel rebars in concrete environment. Scientific Reports, 12(1) .

Hussain, R R and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, J K and Singh, D D N (2016) Accelerated Rusting of Reinforcing Bars: The Role of Manganese Alloying in Concrete Reinforcement Steel Bars. ACI Materials Journal, 113(5) (IF-1.183). pp. 579-588.

Hussain, Raja Rizwan and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N and Ahmed, M (2024) Synergistic protection of borate and silicate salts composite for controlling the chloride-induced pitting and uniform corrosion of steel reinforcement bars embedded in mortars. Scientific Reports, 14(1) .

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2011) Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution – Long term evaluation by EIS. Corrosion Science, 53 . pp. 645-654.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Effect of Thermal Oxidation on Corrosion Resistance of Commercially Pure Titanium in Acid Medium. Journal of Materials Engineering and Performance, 21 (6). pp. 900-906.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N and Chu, P K (2013) Effect of thermal oxidation on the corrosion resistance of Ti6Al4V alloy in hydrochloric and nitric acid medium. Materials and Corrosion / Werkstoffe und Korrosion, 64(10) (IF-1.173). pp. 902-907.

Jayaraj, J and Srinivasan, A and Arunchandran, C and Rajinikanth, V (2023) Corrosion and in vitro characteristics of cerium phosphate-based chemical conversion coating on AZ31 magnesium alloy. Applied Surface Science, 644 .

Jena, P S M and Singh, R K and Mahanta, L and Paswan, S and Sahu, J K (2018) Low cycle fatigue behaviour of nickel base superalloy IN 740H at 760° C: Influence of fireside corrosion atmosphere. International Journal of Fatigue, 116 (IF-3.673). pp. 623-633.

Joseph, O O and Sivaprasad, S and Fayomi, O S I (2017) Comparative study on the effect of NaNO2 in corrosion inhibition of micro-alloyed and API-5L X65 steels in E20 simulated FGE. Energy Procedia, 119 . pp. 953-960.

Kaithwas, C K and Bairi, L R and Mozumder, Y H and Pradhan, S K and Mandal, S (2023) On the role of grain size variation on pitting corrosion and passive film behavior of Alloy 600H. Materials and Corrosion / Werkstoffe und Korrosion .

Kaithwas, C K and Bhuyan, P and Pradhan, S K and Mandal, S (2020) Hall-Petch’ type of relationship between the extent of intergranular corrosion and grain size in a Ni-based superalloy. Corrosion Science, 175 .

Kamaraj, A and Saravana Kumar, S and Rajaguru, M (2018) State of the Art Control Measures for Aluminium Fade and SEN Clogging during Steelmaking Operations. IOP Conference Series: Materials Science and Engineering, 314 (IF-0.32).

Kancharla, H and Mandal, G K and Maharana, S H and Singh, S S and Mondal, K (2022) Structure-Dependent Corrosion Behavior of Electrodeposited Zn Coating. Journal of Materials Engineering and Performance .

Kancharla, H and Mandal, G K and Prasad, N K and Vishwanath, K and Bhushan, B and Godbole, K and Singh, S S and Mondal, K (2023) Effect of inter-critical annealing atmosphere on microstructure and subsequent corrosion behavior of hot-dip galvanized Mn containing high-strength steel. Journal of Applied Electrochemistry .

Kancharla, H and Mandal, G K and Singh, S S and Mondal, K (2022) Effect of prior copper-coating on the microstructural development and corrosion behavior of hot-dip galvanized Mn containing high strength steel sheet. Surface & Coating Technology, 437 .

Kancharla, H and Mandal, G K and Singh, S S and Mondal, K (2022) Effect of strip entry temperature on the interfacial layer and corrosion behavior of galvanized steel. Surface & Coating Technology, 433 .

Kanta, P Laxman Mani and Srivastava, V C and Venkateswarlu, K and Paswan, S and Mahato, B and Das, Goutam and Sivaprasad, K and Krishna, K Gopala (2017) Corrosion behavior of ultrafine-grained AA2024 aluminum alloy produced by cryorolling. International Journal of Minerals, Metallurgy, and Materials, 24(11) (IF- 0.943). pp. 1293-1305.

Katiyar, P K and Randhawa, N S (2019) Corrosion behavior of WC-Co tool bits in simulated (concrete, soil, and mine) solutions with and without chloride additions. International Journal of Refractory Metals and Hard Materials, 85 . p. 105062.

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) Anodic Dissolution Behaviour of Tungsten Carbide Scraps in Ammoniacal Media. Advanced Material Research, 828 (IF-). pp. 11-20.

Khan, D K and Basu, D K and Mukherjee, K P (1978) Inhibition of sea water corrosion by chromate addition. NML Technical Journal, 20 (1-2). pp. 1-5.

Khan, D K and Mukherjee, K P and Banerjee, T (1966) Correlation of data in laboratory and field studies on sea water corrosion. NML Technical Journal, 8 (4). pp. 17-21.

Kishore, Kaushal and Chandan, A K and Purty, M and Karthik, V and Mishra, G and Sahoo, Biraj K and Meena, L K and Chakraborty, J (2022) Effect of microstructure on corrosion behavior of medium manganese steel. Materials Letters, 330 .

Kishore, Kaushal and Chandan, A K and Sahoo, Biraj K and Meena, L K (2022) Novel observation of dominant role of strain rate over strain during pre-straining on corrosion behaviour of 304L austenitic stainless steel. Materials Chemistry and Physics, 277 .

Konar, J and Chandra, N and Amritphale, S S and Das, N N and Srivastava, S C (2003) Corrosion behaviour of white cast iron in organic acids and their sodium salts. Journal of Metallurgy and Materials Science, 45 (1). pp. 39-43.

Konar, J and Gupta, K K and Chandra, N and Amritphale, S S (2004) Effect of p-nitrophenol on corrosion behaviour of white Cast iron and aluminium added white Cast iron. Journal of Metallurgy and materials Science, 46 (3). pp. 191-196.

Konar, J and Kumari, Smita and Nag, Sudha T and Amritphale, S S and Chandra, N (2009) Effect of sodium hexameta phosphate in the presence and absence of calcium chloride on corrosion behaviour of different types of white cast iron. Journal of Metallurgy and Materials Science, 51 (1). pp. 53-59.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2012) Electroless Ni-B-Si3N4 composite coating: deposition and evaluation of its characteristics properties. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42(7) . pp. 920-927.

Kumar, Anil (2004) Hot-dip zinc coatings - A comparative study: Part II. Journal of Metallurgy and materials Science, 46 (2). pp. 115-121.

Kumar, Anil and Jha, G (2001) Hot-dip zinc coatings - A comparative study. Journal of Metallurgy and materials Science, 43 (1). pp. 9-16.

Kumar, Ashish and Singh, V P and Nirala , A and Singh, R C and Chaudhary, R and Mourad, A H I and Sahoo, Biraj K and Kumar , Deepak (2023) Influence of tool rotational speed on mechanical and corrosion behavior of friction stir processed AZ31/Al2O3 nanocomposite. Journal of Magnesium and Alloys, 11(7) . pp. 2585-2599.

Kumar, P Prem and Kannan, K and Natesan, M (2008) Natural thyme as volatile corrosion inhibitor for mild steel in HCI environment. Journal of Metallurgy and Materials Science, 50 (4). pp. 227-234.

Kumar, Ranjeet and Gokhale, A and Varma, Anand and Kumar, Y R and Neelakantan, S and Jain, Jayant (2023) Role of Nb (C, N) and Cr carbides on the fracture behavior of Super304H steel using in-situ tensile studies. Materials Letters, 351 .

Kumar, Vinay and Pandey, B D and Bagchi, D and Khan, Z H and Saha, A K and Bodas, M G (1997) Recovery of nickel from the ammoniacal solution of chromite ore overburden by solvent extraction-electrowinning. NML Technical Journal, 39 (3). pp. 129-141.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2017) Data-driven modeling of corrosion and scale deposition rate in economizer. Anti-Corrosion Methods And Materials , 64(2) (IF-0.364). pp. 178-187.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2017) Data-driven modeling of fireside corrosion rate. Anti-corrosion methods and materials, 64(4) (IF-0.364). pp. 397-404.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2016) Feed Water Chemistry-Related Corrosion Failures in Subcritical 250 MW Coal-Fired Boiler. Journal of Failure Analysis and Prevention , 16(4) (IF- 0.469). pp. 703-711.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2016) Modeling Fireside Corrosion Rate in a Coal Fired Boiler Using Adaptive Neural Network Formalism. Portugaliae Electrochimica Acta (IF-0.960).

Kushwaha, A and Sharma, A and Bhatt, B B and Mukhopadhyay, Amartya and Gupta, D (2023) Inkjet-Printed Graphene-Modified Aluminum Current Collector for High-Voltage Lithium-Ion Battery. ACS Applied Energy Materials .

Lahiri, A K and Banerjee, T and Nijhawan, B R (1967) Some observations on ancient iron. NML Technical Journal, 9 (2). pp. 32-33.

Lahiri, A K and Banerjee, T and Nijhawan, B R (1963) Some observations on corrosion resistance of ancient Delhi Iron Pillar and present time Adivasi Iron made by primitive methods. NML Technical Journal, 5 (1). pp. 46-54.

Lahiri, A K and Banerjee, T and Nijhawan, B R (1965) Some observations on the effect of heat treatment on stress corrosion cracking of Hardenable Steel. NML Technical Journal, 7 (2). pp. 20-27.

Lahiri, A K and Bhakta, U C (1971) Cracking of Brass Tubes in Sugar Juice Evaporators - A Case Study. NML Technical Journal, 13 (4). pp. 109-110.

Lahiri, A K and Mukherjee, K P and Rao, Addanki S and Banerjee, T (1967) Studies on properties of rust formed during atmospheric corrosion. NML Technical Journal, 9 (4). pp. 24-30.

Lal, Kishori and Bhattamishra, A K (1990) Studies on Structural Degradation of Aluminium/Alloy Conductor in L.T. Line in Coastal Regions. NML Technical Journal, 32 (1-4). pp. 3-10.

Lunn, D C F (1977) On load corrosion in power generation. NML Technical Journal, 19 (1). pp. 15-20.

Mahato, P and Singh, R J and Mishra, Suman K (2016) Nanocomposite Ti-Si-B-C hard coatings deposited by magnetron sputtering: Oxidation and mechanical behaviour with temperature and duration of oxidation. Surface & Coatings Technology, 288 (IF- 2.589). pp. 230-240.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801.

Manivel, P (2017) A comparative study on the inhibitive effect of parasubstituted anilines on corrosion of iron in 1M HCI solutions. Journal of Metallurgy and Materials Science, 59(1) . pp. 39-47.

Manivel, P and Venkatachari, G (2004) Investigation on the inhibitive effect of poly (p-aminophenol) on corrosion of iron in 1M HCL solutions. Journal of Metallurgy and Materials Science, 46 (4). pp. 263-270.

Meena, L K and Madan, M and Chaudhari, G P and Singh, Raghuvir (2024) Flow-Assisted Corrosion of API 5L X56 Steel: Effect of Flow Velocity and Dissolved Oxygen. Transactions of The Indian Institute of Metals .

Meena, L K and Seshagiri, R and Singh, Raghuvir (2023) Corrosion behavior of strontium-modified Al-12Si cast alloys in flowing and stagnant chloride-containing media. Journal of Alloys and Compounds, 962 .

Mishra, Suman K and Mahanta, P and Sen, S and Pathak, L C (2012) Effect of Nitrogen on the Growth of Carbon Nitride Thin Films Deposited by RF Plasma Enhanced Chemical Vapor Deposition. Nanoscience and Nanotechnology Letters, 4 . pp. 90-94.

Mishra, Suman K and Mahato, P and Mahato, B and Pathak, L C (2013) Thermal stability and effect of substrate temperature of TiSiBC hard nanocomposite coatings on microstructure, mechanical, thermal behaviour deposited by magnetron sputtering. Applied Surface Science, 266(1 February) . pp. 209-213.

Mishra, Suman K and Shravan Kumar, K and Bysakh, S and Sreemany, M and Pathak, L C (2014) Investigation of interface, microstructure, and mechanical properties of layered thermal barrier coatings of lanthanum zirconate and YSZ deposited by EB-PVD process. Surface and Interface Analysis, 46(7) (IF-1.393). pp. 449-456.

Mishra, T (2013) Pillared clay as an effective catalyst for low temperature VOCs decomposition. Key Engineering Materials, 571 . pp. 71-91.

Mohanty, Ashok and Kumar, S and Tiwari, S K (2021) Assessment of N-(4H-1,2,4-triazol-4-yl)octanamide as hydrochloric acid corrosion inhibitor for mild steel. Materials Today Communications, 27 .

Mohanty, Ashok and Sahoo, K L (2013) Technological Interventions for Brassware Clusters. Science & Culture, 79 . pp. 205-206.

Mohanty, Ashok and Tiwari, S K and Mishra, T and Chakravarty, S (2012) Making the Glitter Last – Development of A Novel Lacquer for Copper Based Alloys. Science & Culture, 78 (11-12) . pp. 550-552.

Mukherjee, A N and Mukherjee, K P and Altekar, V A (1983) Development of high output Al-anode (Hopal) for cathodic protection. NML Technical Journal, 25 (1-2). pp. 20-24.

Mukherjee, J K and Lahiri, A K and Banerjee, T (1968) Studies on the structural properties of rust from ancient iron. NML Technical Journal, 10 (1). pp. 25-29.

Mukherjee, K P (1966) Internal corrosion of tankers and its prevention. NML Technical Journal, 8 (4). pp. 28-31.

Mukherjee, K P and Lahiri, A K and Banerjee, T (1961) Corrosion of steam turbine bladings -A case study. NML Technical Journal, 3 (3). pp. 25-28.

Mukherjee, K P and Lahiri, A K and Banerjee, T (1970) Stainless steel corrosion - A Case Study. NML Technical Journal, 12 (2). pp. 44-48.

Mukherji, A N and Dey, A K and Rao, Addanki S and Singh, M N (1977) Evaluation tests on different Protective coatings in marine atmosphere. NML Technical Journal, 19 (1). pp. 21-27.

Mukherji, A N and Mishra, G S and Banerjee, M K (1994) An approach to galvanic corrosion. NML Technical Journal, 36 (4). pp. 157-166.

Narain, Raj and Lahiri, A K (1966) Impingement corrosion. NML Technical Journal, 8 (4). pp. 32-37.

Naseema, S and Gaurav, B and Ghosh, M and Das, Goutam and Srivastava, V C and Srinivas , Rao K and Gopalakrishna, K (2018) TEM Analysis of Precipitates in a Low Alloy Wear Resistant Steel and Correlating with its Corrosion Behaviour. Advanced Materials Research, 1148 (1148). pp. 75-81.

Omiogbemi, I M B and Yawas, D S and Das, Atanu and Afolayan, M O and Dauda, E and Kumar, Roshan and Gorja, S R and Chowdhury, S G (2022) Mechanical properties and corrosion behavior of duplex stainless steel weldment using novel electrodes. Scientific Reports, 12(1) .

Pandya, Achal and Saha, D and Singh, J K and Paswan, S and Singh, D D N (2017) Effect of Environmental Pollution on Corrosion Characteristics of 3003 Aluminium Alloy Exposed in Different Parts of India. Transactions of the Indian Institute of Metals, 70(6) (IF-0.533). pp. 1607-1620.

Pandya, Achal and Singh, D D N (2010) The Delhi Iron Pillar: A study of the Corrosion Formed in Areas of Surface Deformation. Metal 2010 : Charleston, South Carolina, USA . pp. 1-6.

Parashar, S K S and Basu, D K and Banerjee, M K (2001) Failure analysis of alkyd coating and its model. Journal of Metallurgy and materials Science, 43 (1). pp. 33-41.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Localised / galvanic corrosion of Mg-Zn-Al alloy. Journal of Metallurgy and materials Science, 45 (3). pp. 137-141.

Parashar, S K S and Basu, D K and Banerjee, M K (2002) Role of additives in the phoshating bath. Journal of Metallurgy and materials Science., 44 (4). pp. 191-201.

Pari, Sriram and Jha, Niki S and Ganesan, Thamarai Selvi and Jha, S K (2020) Pulse Electrodeposited Au–WO3 Catalyst from a Water–Ionic Liquid Microemulsion for Photoaccelerated Methanol Electrooxidation. The Journal of Physical Chemistry C, 124(40) (IF-4.270). pp. 21957-21967.

Paswan, S and Singh, J K and Singh, D D N (2020) Effect of lead alloying on corrosion characteristics of galvanized coatings exposed in atmosphere, simulated laboratory and a service environment. Surfaces and Interfaces, 21 . p. 100752.

Perumal, K E (2004) Metallurgical Variables Leading to Corrosion/ Cracking of Chemical Process Equipments. National Seminar on Corrosion Failures & Mitigation .

Phuong, To Duy and Bach, Tran Ngoc (2008) Compositional and Microstructural effect on atmospheric corrosion of weathering steel. Journal of Metallurgy and Materials Science, 50 (1). pp. 23-31.

Pradhan, S K and Bhuyan, P and Bairi, L R and Mandal, S (2021) Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel. Corrosion Science, 180 . p. 109187.

Pradhan, S K and Jena, P S M and Chaithanya, P V S and Singh, R (2024) Enhancement of Molten Salt Corrosion Resistance of Ni-Based Superalloy Through Adding Inhibitor. Transactions of The Indian Institute of Metals .

Premkumar, P and Kannan, K and Venkatakrishnan, P G (2010) Menthol as volatile corrosion inhibitor for mild steel in HCl environment. Journal of Metallurgy and Materials Science, 52 (4). pp. 371-377.

Quraishi, M A and Jamal , D (2005) Inhibition of metals corrosion by a new vapour phase corrosion inhibitor. Journal of Metallurgy and Materials Science, 47 (1). pp. 45-50.

Raji, K and Raj, S Alfred Cecil (2010) Plasticity of tensile specimen of 7% copper in aluminium composite. Journal of Metallurgy and Materials Science, 52 (4). pp. 379-383.

Rajput, U P and Zala ., D M and Darji , S B and Rao , V J and Vaish, Ashok Kumar (2019) Recent advancements in hydrophobic materials and their significant applications in corrosion prevention. Journal of Metallurgy and Materials Science, 61(3) . pp. 125-133.

Ram, S and Singh, T B and Srikanth, S (1998) Thermal desorption process of water in amorphous AlO(OH)·αH2O fibres prepared by an electrochemical method. Materials Transactions, JIM, 39 (4). 485-491 .

Rao, Addanki S and Dey, A K (1971) Corrosion of mild steel in the marine atmosphere at Digha. NML Technical Journal, 13 (1). pp. 27-31.

Rao, G N and Gupte, P K (1971) Inoculation of cast iron. NML Technical Journal, 13 (1). pp. 19-26.

Rao, G N and Prasad, P R (1971) Increase in casting yield by use of exothermic riser. NML Technical Journal, 13 (2). pp. 49-51.

Rao, M Ananda and Babu, S R and Kumar, M V Pavan (2018) Stress corrosion cracking failure of a SS 316L high pressure heater tube. Engineering Failure Analysis, 90 (IF-1.676). pp. 14-22.

Rao, M Ananda and Kumar, M V Pavan (2015) An Investigation of a Dryer Can Failure in a Paper Mill. Journal of Failure Analysis and Prevention, 15(2) (computing). pp. 251-257.

Ravi Kumar, B (2007) Influence of Cold Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. METALLURGICAL AND MATERIALS TRANSACTIONS A, 38A (9). pp. 2085-2094.

Ray, Ashok K and Bose, S C and De, P K and Das, D K (2010) Lifetime evaluation of a thick thermal barrier coated superalloy used in turbine blade. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 527 (21-22). pp. 5474-5483.

Roessler, Klaus (1995) The non rusting iron pillar at Dhar. NML Technical Journal, 37 (4). pp. 143-154.

Roy, Nilima and Bhardwaj, A and Kujur, A and Ghosh, M and Singh, R and Meena, L K and Das, Goutam and Chattoraj, I (2018) Effect of heterogeneities on pitting potential of line pipe steels: An adaptive neuro-fuzzy approach. Corrosion science, 133 (IF-5.245). pp. 327-335.

Saha, Jayant K and Mitra, P K and Paul, S and Singh, D D N (2010) Performance of different organic coatings on steel substrate by accelerated and in atmospheric exposure tests. Indian Journal of Chemical Technology, 17 (2). pp. 102-110.

Sahu, A Kumar and Panda, P K (2005) Ceramic coatings on metals prepared by sol-gel technique for corrosion resistance study. Journal of Metallurgy and Materials Science, 47 (1). pp. 25-29.

Satapathy, P K and Behera, R K and Nayak, A K and Mishra, T (2011) Adsorptive Removal of Phosphate from Aqueous Solutions using Ceria-Titania Mixed Oxide. Asian Journal of Chemistry, 23 (7). pp. 3055-3058.

Satendra, Kumar and Sankara Narayanan, T S N (2011) Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium. Journal of Applied Electrochemistry, 41 . pp. 123-127.

Sharma, T L (1990) Structural Studies of the Anodic Oxide Films Formed on Aluminium and its Alloys. NML Technical Journal, 32 (1-4). pp. 18-28.

Sharma, T L and Nag, A and Arora, S M and Trehan, Y N and Altekar, V A (1976) Anodizing of hot-dip aluminized mild and stainless steel improves corrosion and heat resistance. NML Technical Journal, 18 (1). pp. 1-5.

Sharma, T L and Trehan, Y N (1980) Integral colour anodizing of aluminium and aluminium alloys in molybdate containing acidic baths. NML Technical Journal, 22 (1-2). pp. 9-19.

Shashikala, A R and Shridhar, V S (2016) Corrosion studies of electroless chomium based coatings. Journal of Metallurgy and Materials Science, 58(1) . pp. 19-24.

Shukla, A K and Sivakumar, B and Mishra, Suman K (2020) Corrosion Behavior of Ti-Si-B-C Nanocomposite Hard Coating with Different Si Contents on 4130 Steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 51(7) (IF-2.050). pp. 3576-3586.

Singh, B N and Chakravarti, H K (1965) Electrolytic recovery of tin from tinplate scrap. NML Technical Journal, 7 (4). pp. 9-12.

Singh, Charu and Tiwari, S K and Singh, R (2019) Effect of carbonate and phosphate conversion pretreatments and optimization on corrosion behaviour of subsequent electroless nickel coating on AZ91 alloy. Applied Surface Science, 483 . pp. 334-354.

Singh, Charu and Tiwari, S K and Singh, R (2019) Exploring environment friendly nickel electrodeposition on AZ91 magnesium alloy: Effect of prior surface treatments and temperature of the bath on corrosion behaviour. Corrosion Science, 151 . pp. 1-19.

Singh, Charu and Tiwari, S K and Singh, Raghuvir (2021) Development of corrosion-resistant electroplating on AZ91 Mg alloy by employing air and water-stable eutectic based ionic liquid bath. Surface & Coatings Technology, 428 .

Singh, D D N (2000) Current Developments in Improving the Corrosion Resistance of Zinc Coated Steel Sheets. Proceedings of Coil-Coated Steel Sheets, New Delhi, 2000 . pp. 1-19.

Singh, D D N and Banerjee, M K (1984) Vapour phase corrosion inhibitors—a review. Anti-Corrosion Methods and Materials, 31(6) . pp. 4-22.

Singh, D D N and Chakrabarti, S and Jha, G (2000) Latest Trends in Corrosion Resistant Hot Dip Galvanized Coatings. Galvanizing . pp. 1-7.

Singh, D D N and Dey, A K (1989) Corrosion behaviour of 304 stainless steel in dioxane. NML Technical Journal, 31 (1-4). pp. 24-27.

Singh, D D N and Ghosh, Rita (2003) Corrosion resistance performance of fusion bonded epoxy coated rebars used as reinforcement in concrete structures. Journal of Metallurgy and materials Science, 45 (2). pp. 73-83.

Singh, D D N and Ghosh, Rita and Singh, B K (1998) Low Alloyed Thermo Mechanically Treated (TMT) Steel Rebars: An Ideal Solution for Reinforcement Corrosion. Steel in Construction, 1 (2). pp. 1-11.

Singh, D D N and Ghosh , Rita and Singh, R J (2003) Corrosion Performance of Steel Rebars Embedded in Chloride Contaminated Concrete Mortars-Role of Surface Pre-Treatments. Metals Materials and Processes, 16 (2-3). pp. 1-14.

Singh, D D N and Kumar, A (2003) A fresh look at ASTM g 1-90 solution recommended for cleaning of corrosion products formed on iron and steels. Corrosion Science, 59 (11). pp. 1029-1036.

Singh, D D N and Pandeya, A (2010) Role of Self-Assembled Monolayer of 1,2,3-Benzotriazole in Protecting Copper Artifacts Covered with Sulfide Film. Corrosion, 66 (11). 115002-115002-11.

Singh, D D N and Singh, T B and Chatterjee, P and Patty, B B and Mukherjee, K P (1990) Chemical corrosion control for sour crude oil pipelines. Corrosion prevention & control, 37(2) . pp. 37-41.

Singh, D D N and Venugopalan, T (2013) Understanding the Corrosion and Remedial Measures to Control the Deterioration of Reinforcement Steel Bars by Modification in Their Chemistry and Application of Surface Coatings. Transactions of the Indian Institute of Metals, 66(5-6) (IF-0.215). pp. 677-687.

Singh, Inder and Dey, A K and Altekar, V A (1982) Effect of some organic inhibitors on corrosion and hydrogen absorption by high carbon steel. NML Technical Journal, 24 (3-4). pp. 36-39.

Singh, Inder and Singh, M N (1992) Studies on Aluminium-Zinc Alloy Coating. NML Technical Journal, 34 (3-4). pp. 1-8.

Singh, J K and Paswan, S and Saha, D and Pandya, Achal and Singh, D D N (2021) Role of air pollutant for deterioration of Taj Mahal by identifying corrosion products on surface of metals. International journal of environmental science and technology .

Singh, J K and Singh, D D N (2012) The nature of rusts and corrosion characteristics of low alloy and plain carbon steels in three kinds of concrete pore solution with salinity and different pH. Corrosion Science, 56 . pp. 129-142.

Singh, J K and Singh, D D N (2012) Studies on defects in galvanized coating on steel wire. Indian Journal of Chemical Technology, 19 . pp. 361-365.

Singh, M N and Basu, D K and Bhattamishra, A K and Kumari, Seema and Banerjee, M K (2000) Corrosion behaviour of commercial paints on mild steel in aggressive media. Journal of Metallurgy and materials Science, 42 (2). pp. 105-112.

Singh, M N and Singh, Inder (1985) Polarisation studies of the cold rolled mild steel in sulphuric acid containing metallic ions and an inhibitor. NML Technical Journal, 27 (1-2). pp. 3-8.

Singh, Manjit and Bhattamishra, A K (2007) Effect of some thiourea and quinoline derivatives on corrosion of mild steel in sulphuric acid at different temperatures. Journal of Metallurgy and Materials Science, 49 (1). pp. 39-44.

Singh, Manjit and Bhattamishra, A K and Das, N N (2009) Effect of organic additives on inhibition of corrosion of mild steel in 2M H2SO4 solution. Journal of Metallurgy and Materials Science, 51 (2). pp. 113-117.

Singh, Narinder and Mgr. Inz. Jan, Sosin (1965) Recovery of zinc and lead from the slime obtained from electrolytic zinc plant. NML Technical Journal, 7 (3). pp. 15-20.

Singh, R K and Paswan, S (2024) Isothermal High-Temperature Oxidation Behaviour of Nickel-Based Superalloy IN740H. Transactions of Indian Institute of Metals .

Singh, R N and Awasthi, R and Tiwari, S K (2010) Electro-Catalytic Activities of Binary Nano-Composites of Pt and NanoCarbon/Multiwall Carbon Nanotube for Methanol Electro-Oxidation. The Open Catalysis Journal, 3 (1876-214X/10). pp. 50-57.

Singh, Raghuvir (2003) The application of an electrochemical technique to determine the porosity of electroless nickel coatings produced in hypophosphite baths. Anti-corrosion Methods & Materials, 50 (2). pp. 121-128.

Singh, Raghuvir and Gaur, B and Singh, A K (1999) Corrosion protection of stainless-steel in chlorinated solutions by electrochemical technique. NML Technical Journal, 40 (3). pp. 127-133.

Singh, Raghuvir and Gaur, B and Singh, A K (2001) Impact of Filtrate Recycling on Corrosion of Stainless Steels in Hypochlorite Solutions. Journal of Electrochemical Society of India, 50 (1). pp. 21-26.

Singh, Raghuvir and Ghosh Chowdhury, S and Tiwari, S K and Dahotre, N B (2008) Laser surface processing of Ti6Al4V in gaseous nitrogen: corrosion performance in physiological solution. Journal of Materials Science: Materials in Medicine, 19 (3). pp. 1363-1369.

Singh, Raghuvir and Kumar, Mukesh and Kumar , Deepak and Mishra, Suman K (2012) Erosion and Corrosion Behavior of Laser Cladded Stainless Steels with Tungsten Carbide. Journal of Materials Engineering and Performance, 21(11) (0.855 (SCI)). pp. 2274-2282.

Singh, Raghuvir and Kurella, A and Dahotre, N B (2006) Laser Surface Modification of Ti–6Al–4V: Wear and Corrosion Characterization in Simulated Biofluid. Journal of Biomaterials Applications, 21 (1). pp. 49-73.

Singh, Raghuvir and Mandal, G K and Bhagat, A N and Misra, Siddhartha (2024) Special Issue on Corrosion and Coating Technology. Transaction of the Indian Institute of Metals, 77p. . pp. 1247-1248.

Singh, Raghuvir and Swaminathan, J and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2005) Effects of Cold Deformation Prior to Sensitization on Intergranular Stress Corrosion Cracking of Stainless Steel. Corrosion, 61 (9). pp. 907-916.

Singh, Raghuvir and Swaminathan, J and Paswan, S and Rajnikanth, V and Chattoraj, I (2011) Investigations on high temperature corrosion of wire enameling oven. Engineering Failure Analysis, 18 (5). pp. 1375-1387.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cladding of tungsten carbide and stellite using high power diode laser to improve the surface properties of stainless steel. Advanced Materials Research, 585 . pp. 498-501.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K and Dahotre, N B (2011) Electrochemical and mechanical behavior of laser processed Ti–6Al–4V surface in Ringer’s physiological solution. Journal of Materials Science: Materials in Medicine, 22 . pp. 1787-1796.

Singh, Rajesh Kumar (2010) The corrosion protection of stainless steel in phosphate fertilizer industry. Journal of Metallurgy and Materials Science, 52 (2). pp. 173-180.

Singh, S and Sribalaji, M and Wasekar, N P and Joshii, H and Sundararajan, G and Singh, Raghuvir and Keshri , A K (2016) Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel-tungsten composite coatings. Applied Surface Science, 364 (IF-3.387 ). pp. 264-272.

Singh, Swarnima and Tiwari, S K and Singh, Raghuvir (2020) Influence of laser scanning speed on nitrided Ti6Al4V surface. Surface Engineering, 36(12): Special Issue: Laser . pp. 1285-1293.

Singh, Swarnima and Tiwary, S K and Singh, Raghubir (2018) Influence of laser scanning speed on nitrided Ti6Al4V surface. Surface Engineering, online .

Singh, T B (1999) Role of additives on the corrosion behaviour of nickel in 5% sulphuric acid. NML Technical Journal, 40 (4). pp. 171-176.

Singh, T B and Singh, M N and Basu, D K and Narang, S K (2003) Corrosion behaviour of electro-deposited zinc-iron alloy coatings on mild steel. Journal of Metallurgy and materials Science., 45 (4). pp. 199-203.

Singh, T B and Singh, Raghuvir and Mandhyan, A K (2007) Corrosion protection of steel using waste oils. Journal of Metallurgy and Materials Science, 49 (1). pp. 51-58.

Singhbabu, Y N and Sivakumar, B and Choudhary, S K and Das, S and Sahu, Ranjan K (2018) Corrosion-protective reduced graphene oxide coated cold rolled steel prepared using industrial setup: A study of protocol feasibility for commercial production. Surface and Coatings Technology, 349 (IF-3.192). pp. 119-132.

Sinha, A K and Dasgupta, P and Chakravarty, S and Bhattacharyya, G and Bhattacharjee, S (2002) Bio-accumulation of Heavy Metals in different organs of some of the Common Edible Fishes of Kharkai River, Jamshedpur. Indian Journal Environment Health, 44 (2). pp. 102-107.

Sircar, J K and Mohanty, Ashok and Konar, J and Garain, Pijush K and Dhonge, S S (2011) Stability constant determination revisited : A voltammetric method of study of Lead-1, 10 phenanthroline complex. Journal of Metallurgy and Materials Science, 53 (1).

Sivakumar, B and Pathak, L C and Singh, R (2018) Fretting corrosion response of boride coated titanium in Ringer's solution for bio-implant use: Elucidation of degradation mechanism. Tribology International, 127 (IF-3.517). pp. 219-230.

Sivakumar, B and Pathak, L C and Singh, R (2018) Fretting corrosion response of boride coated titanium in Ringer's solution for bio-implant use: Elucidation of degradation mechanism. Tribology International, 127 (IF-3.246). pp. 219-230.

Sivakumar, B and Pathak, L C and Singh, Raghuvir (2017) Role of surface roughness on corrosion and fretting corrosion behaviour of commercially pure titanium in Ringer's solution for bio-implant application. Applied Surface Science, 401 (IF-3.387). pp. 385-398.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Comparison of the fretting corrosion behaviour of Ti-6Al-4V alloy and CP-Ti IN ringer’s solution. Tribology - Materials, Interfaces and Surfaces, 5(4) (1.553). pp. 158-164.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Fretting corrosion behaviour of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions. Wear, 270 . pp. 317-324.

Sivaramakrishnan, C S and Chowdhury, K M and Kumar, Rajendra (1971) Impact of melting procedures on foundry technology of aluminium. NML Technical Journal, 13 (1). pp. 1-7.

Sivaramakrishnan, C S and Lal, Kishori and Mahanti, R K (1993) Abatement of intergranular corrosion in zinc-aluminium foundry alloys through flux treatment. Anti-corrosion Methods & Materials, 40 (4). pp. 4-8.

Srinivasan, K V and Altekar, V A (1970) Studies on inhibitors for packaging & storage. NML Technical Journal, 12 (2). pp. 33-39.

Thakur, P and Chakravarty, S and Maity, S and Bhattacharjee, S and Gupta, K K (2004) A Study on the Adsorption of Cr(VI) on a Synthetically Prepared Zn-Al-Cl Layered Double Hydroxide(LDH). Metals Materials and Processes, 16 (2-3). pp. 339-350.

Thakur, U P (2004) Recent Developments in Corrosion Mitigation. National Seminar on Corrosion Failures & Mitigation .

Tiwari, S K and Sahu, Ranjan K and Pramanick, A K and Singh, Raghuvir (2011) Development of conversion coating on mild steel prior to sol gel nanostructured Al2O3 coating for enhancement of corrosion resistance. Surface and Coatings Technology, 205 . pp. 4960-4967.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2012) Electrochemical behavior of zirconia based coatings on mild steel prepared by sol-gel method. Corrosion Science, 63 . pp. 334-341.

Trehan, Y N (1967) Ageing characteristics of some Al-Zn-Mg alloy. NML Technical Journal, 9 (3). pp. 4-7.

Trehan, Y N and Sharma, T L (1972) The electrolytic polishing of aluminium and aluminium alloys in a universal perchloric acid-bath. NML Technical Journal, 14 (3). pp. 119-126.

Varma, Nitin Pratap and Garai, Subhadra and Sinha, Arvind (2012) Synthesis of injectable and cohesive nano hydroxyapatite Scaffolds. Journal of Materials Science: Materials in Medicine, 23 (4). pp. 913-919.

Vivek, Vivek and Choudhary, Shyam and Das, Sumitesh and Mishra, S K (2024) Development of environment-friendly reduced graphene oxide coating and corrosion behavior on cold-rolled interstitial-free (IF) steel. Bulletin of Materials Science, 47(2) .

Yadav, Anshul and Sharma, Prerana and Panda, Asit Baran and Shahi, Vinod K (2021) Photocatalytic TiO2 incorporated PVDF-co-HFP UV-cleaning mixed matrix membranes for effective removal of dyes from synthetic wastewater system via membrane distillation. Journal of Environmental Chemical Engineering, 9(5) (IF-5.909). p. 105904.

Yadav, P N S and Wadhwani, R (1992) Heterocyclic Compounds as Inhibitors for Aluminium Alloys in Hydrochloric Acid. NML Technical Journal, 34 (1-2). pp. 8-17.

Yadav, P N S and Wadhwani, R (1993) Role of anion in the corrosion of 1060 aluminium in hydrochloric acid. NML Technical Journal, 35 (1-2). pp. 1-5.

Book or NML Publication

Director, NML (2011) la vintage metallurgie : 60 years of marriage of science to industry. In: la vintage metallurgie. National Metallurgical Laboratory, Jamshedpur, pp. 1-416.

Director, NML (2010) NML Diamond Jubilee Souvenir. In: NML Diamond Jubilee Souvenir. National Metallurgy Laboratory, Jamshedpur.

Meena, L K and Sinha, A K and Seshagiri, R and Singh, R (2022) Effects of Strontium Addition on Corrosion Properties of Al-12Si Alloy. In: Recent Trends in Electrochemical Science and Technology. Springer Proceedings in Materials, 15 . Springer, Singapore, pp. 35-52. ISBN 978-981-16-7553-9

Sankara Narayanan, T S N (2011) Role of nanomaterials on tribocorrosion. In: Corrosion protection and control using nanomaterials. Woodhead Publishing Ltd., UK, Cambridge, pp. 1-77.

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro - and electroless deposited composite coatings: preparation, characteristics and applications. In: Encyclopedia of composites. Wiley, Hoboken, N J.

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro‐ and electroless composite coatings. In: ENCYCLOPEDIA OF TRIBOLOGY . Springer‐Verlag GmbH, Heidelberg, pp. 1-11.

Singh, D D N (1997) Localized corrosion and component failures: Causes, mechanism and remedial measures. In: Failure analysis: Proceedings of the clinic on failure analysis, februrary 18-19,1997. NML, Jamshedpur, pp. 169-211.

Conference or Workshop Item

Agarwal, Lalit Mohan (1971) Corrosion and Scaling problems with process Cooling Water. In: Proceedings of Short Course on "Corrosion Control in Water and Waste Water Engineering", Feb. 24th-27th, 1971, NML, Jamshedpur.

Arceivala, S J (1971) Factors Affecting Corrosion in Water and Waste Water Engineering. In: Corrosion Control in Water and Waste Water Engineering, Feb. 24th-27th, 1971, NML, Jamshedpur.

Arceivala, S J (1971) Water Conditioning for Cooling Towers, Spray Ponds etc. In: Proceedings of Short Course on " Corrosion Control in Water and Waste Water Engineering", Feb. 24th-27th, 1971, NML, Jamshedpur.

Bhakta, U C (1998) Power Plant Component Failures Investigation and Remedial Measures. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Bhalerao, B B and Arceivala, S J (1971) Application of Corrosion Control Techniques in Municipal Water and Waste Water Engineering. In: Proceedings of Short Course on " Corrosion Control in Water and Waste Water Engineering", Feb. 24th-27th, 1971, NML, Jamshedpur.

Bhatia , B S and Singh, Janardan (1997) Some Aspects of Tubes Galvanising and Practice at 'Tubes Division' of 'Tata Steel'. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Bhattacharya, D K (1995) Non-Destructive Test Techniques for Boiler Systems. In: Proceedings of National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Bulusu, K R (1971) Chemical Characteristics of Water Indluencing Corrosion. In: Proceedings of Short Course on "Corrosion Control in Water and Waste Water Engineering", Feb. 24th-27th, 1971, NML, Jamshedpur.

Ca, To Duy (1998) Effect of Rare Earth Metals Injection & Gas Stirring on Cleanliness of Pipeline Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Effect of Rare Earth Metals on Sulphide inclusion in Pipeline Steel. In: Non-metallic inclusion in Steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Influence of Rare Earth Metals on Macrostructure of Continuously Cast Steel Rolling Pipe. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Influence of Rare Earth Metals on Mechanical Properties of Pipeline Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Influence of Rare Earth Metals on Non-Metallic Inclusions in Cast Alloy Steels. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Precipitation and Gp-Zone Structures in AlZnMg(Cu, Zr) Alloys. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) The use of Rare Earth Metals for Modification of Non-Metallic inclusions in Silicon Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Chatterjea, A B (1953) Some Aspect of Service Failures at Elevated Temeratures. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur.

Chattoraj, I (1997) Industrial corrosion failure: Case studies. In: UNSPECIFIED.

Chaudhary, S K (2001) Investigation of Corrosion Affected Concrete Structures-A Systematic Approach. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Chaudhary, S K and Chaturvedi, A K (2001) Preventive and Protective Solution for Corrosion in Concrete through Chemistry. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Chaudhary, S K and Kurmaiah, N and Ghoshal, B T (2001) Performance of Concrete Exposed to Corrosive Environment. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Chaudhuri, S (1995) Life Prediction of Boiler Tubes in Corrosive Environments. In: Proccedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Duy, C To (1998) Non-Metallic Inclusions in Carbon Steel Containing Rare Earth Metals. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Duy, P To (1998) Effect of Cao-Mgo-Re-Caf2 Synthetic Powder on Desulphurization of 12Cr20Ni38Mo5 Alloy. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Fick, N C (1953) The Influence of Stress Raisers on the Performance of Materials. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur.

Gaur, B (1998) Effect of Surface Preparation on Corrosion of Metals and Alloys. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Ghosh, R N (1995) Boiler Corrosion - Metallurgical Aspect. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Gnanamoorthy, J B and Jayakumar, T and Raj, Baldev (1995) Failure Analysis of A 304 SS Girdling Loop of the Boiler in a 500 MW Thermal Power Plant. In: Proceedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Gupta, U and Tiwari, S N and Sharma, R N and Nath, R and Tewari, V K and Prakash, S (1995) Failure Investigation of a Boiler Pipe. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Jain, P and Sinha, A K and Bhakta, U C (1995) Stress Corrosion Cracking of Stainless Steel Super Heater Tubes in 200 MW Boiler. In: Proceedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Jangbahadur, S S and Garg, Rajneesh and Agarwal, Chirag (1998) Role of Phosphating systems in Electrodeposition priming & Latest Trends in Surface Coating in Automobile Industry. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Jha, R (1997) Recovery of Zinc from Zinc Ash. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Khanna, A S (1995) Fireside Corrosion and Erosion Problems in Coal Based Power Plant. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Khanna, A S (1998) New Generation Coatings - A Combination of Thermal Spray and Organic Paint Coatings to give Enhanced Corrosion Protection in Aggressive Environments. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Krishnaswamy, N and Bhattacharya, P S (1995) Water side Corrosion in Boilers - Tata Steel's Experiences. In: Proceedings of the National workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Kumar, Rajendra (1995) Contemporary views of Corrosion and Performance Related Issues in Modern Coal Fired Boiler. In: Proceedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Kumar, Sanjay and Kumar, Virendra and Prasad, M M (2001) Corrosion of Reinforced Concrete and Its Protection. In: National Seminar on Corrosion and Its Prevention (NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Lahiri, A K (1971) Some Aspects of Cathodic Protection. In: Proceedings of Short Course on "Corrosion Control in Water and Waste Water Engineering, Feb. 24th-27th, 1971, NML, Jamshedpur.

Mahabal, B L and Patwardhan, A D (1971) Corrosion Inhibitors, Coatings and Linings. In: Proceeedings of Short Course on "Corrosion Control in Water and Waste Water Engineering", Feb. 24th-27th, 1971, NML, Jamshedpur.

Mahajan, R C (1997) Spelter Pan - Design, Heating Systems and Operations. In: Workshop on Hot Dip Galvanizing, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Mediratta, S R and Saha, Jayant K (2001) Recent Developments in Corrosion Protection of Steel Structures. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Mishra, T and Hait, Jhumki and Aman, Noor and Jana, R K (2008) Photocatalytic Removal of Copper and Selenium from Waste water under Visible Light. In: Twelfth International Conference on Non-Ferrous Minerals & Metals - 2008, July 4-5, 2008, Nagpur, India.

Mohanrao, G J (1971) Corrosion Control in Sewers. In: Proceedings of Short Course on "Corrosion Control in Water and Waste Water Engineering", Feb. 24th-27th, 1971, NML, Jamshedpur.

Mohanty, O N and Jha, G (1998) Corrosion Control through Surface Modification. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Mookerji, S N and Kapur, J C (1971) Some Problems of Corrosion in Thermal Power Plants. In: Proceedings of Short Course on "Corrosion Control in Water and Waste Water Engineering", Feb. 24th-27th, 1971, NML, Jamshedpur.

Murthy, K S N and Pugazhenthy, L (1998) Recent Technology and Market Trends in Galvanizing. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Narang, S K (1998) Industrial Metal Finishing for Corrosion Control. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Narang, S K (2004) NML's Contributions in Corrosion, Failures & Mitigation. In: National Seminar on Corrosion Failures & Mitigation, 2004, NML Jamshedpur.

Prabhakaram, P (1998) Organic Coatings-- Basic Considerations of Protections of Iron and Steel. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Purohit, V T (1971) Limitations and Economics of Cathodic Protection. In: Proceedings of Short Course on " Corrosion Control in Water and Waste Water Engineering", Feb. 24th-27th, 1971, NML, Jamshedpur.

Purohit, V T (1971) The Use of Cathodic Protection in Sewage Treatment Plants. In: Proceedings of Short Course on "Corrosion Control in Water and Waste Water Engineering", Feb. 24th-27th, 1971, NML, Jamshedpur.

Ramachandrarao, P (1995) Management Strategies for Corrosion free Performance of Power Plants - (No Full Text). In: Proceedings of the National Workshop on the Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Rao, K S (1971) Epoxy Finishes for Corrosion Control. In: Proceedings of Short Course on "Corrosion Control in Water and Waste Water Engineering, Feb. 24th-27th, 1971, NML, Jamshedpur.

Ray, Ashok K and Tiwari, Y N and Sahu, J K and Swaminathan, J and Roy, P K and Sinha, S K and Das, Goutam and Ghosh Chowdhury, S and Kumar, P and Chaudhuri, S (2001) Effect of Oxide Scale Deposition on the Residual Life of Service Exposed Reheater Tubes in Boiler of a Thermal Power Plant. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Saha, Jayanta and Singh, D D N and Nair, Premraj (2012) Performance Evaluation of Field Exposed Painted Constructional Steels. In: Corcon International Corrosion Conference and Expo - 2012, September 26-29, 2012, Goa, India.

Sethuraman, R (1971) Corrosion Control in Industrial Water System. In: Proceedings of Short Course on "Corrosion Control in Water and Waste Water Engineering", Feb. 24th-27th, 1971, NML, Jamshedpur.

Sharma, R K and Patel, L R and Bhatt, M M (2001) On Line Chemical Cleaning of Critical Heat Exchangers for Cooling Water Deposit and their Control to Sustain High Production Level of Methanol - An Experience and Case Study at GNFC. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Singh, D D N (1997) Pickling, Rinsing and Fluxing of Steels before Galvanizing. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Singh, D D N (1997) Post Treatment of Galvanized Coating to Improve Corrosion Resistance. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Singh, D D N (1998) Role of Concrete and Steel Surface on Performance of Structures. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Singh, D D N (1995) Various forms of water side Corrosion: Causes & Prevention. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Singh, D D N and Dey, Mahuya (2001) Studies on Performance of Galvannealed Coatings and Other Type of Zinc Coatings. In: National Seminar on Corrosion and Its Prevention (NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Singh, D D N and Ghosh, Rita (2001) Corrosion Resistance Performance of Fusion Bonded Epoxy Coated Rebars. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Singh, D D N and Ghosh, Rita (2005) Protective Coatings for Steel Bars in Reinforced Structures. In: 3' International Symposium on Surface Protective Coatings, November, 14-16, NML, Jamshedpur.

Singh, Inder (1995) Inhibitors for Boiler-Water Corrosion. In: Proceedings of the National Workshop on the Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Singh, Inder and Mukherjee, A N (1998) Corrosion of Tinned Sheets during Transportation-A Case Study. In: Proceedings of International Conference on Corrosion CORON-97 Nehru Centre, Mumbai, India, 3-6, December, 1997, NML, Jamshedpur.

Singh, Janardan and Bhatia, B S (1997) Effect of Steel Composition on Zinc Coating and Pot Failure. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Singh, M N and Basu, D K and Bhattamishra, A K and Narang, S K (2002) Corrosion resistant electrodeposited zinc coating from zinc dross. In: CORCON 2001, 28-30 Nov 2002, Goa.

Singh, Raghubir (1995) Some Case Histories of Failure of Reheater Tubes. In: Proceedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Singh, Raghuvir (2011) Different Forms of Corrosion in Industries. In: lndustrial Corrosion and Protection in Coastal & Other Environments, Feb - 2011, HIT.

Singh, Raghuvir and Das, Goutam and Suman, Satyarth and Singh, P K (2008) Response of Weld Joints in Stainless Steel 304LN Pipe to Low Temperature Sensitization. In: IIW- IC-2008 Chennai, 8-10 January, 2008, Chennai.

Singh, Raghuvir and Dey, P K and Kumar, A and Das, S K and Ravi Kumar, B and Chattoraj, I (2001) Intergranular Corrosion of Deformed SS304. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Singh, S R (1998) Characterization of Corrosion Related Failures. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Singh, T B (1998) Protective Nature of the Surface film Formed on the Weathering Steel. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Singh , Inder (1997) Corrosion Behaviour of Galvanised Products. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Sivaramakrishnan, C S and Choudhuri, S P (1998) Role of Thermomechanical Treatments on Mechanical Prope-rties, Microstrucures and Corrosion Properties of Micro-alloyed Steels. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Subramanian, V R (1997) Galvanizing Industries in India - Present Scenario. In: Workshop on Hot Dip Galvanizing - HODGA -97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Thakur, U P (2001) Toward the Concept of Designing Smart Corrosion Prevention System. In: National Seminar on Corrosion and Its Prevention (NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Tiwari, S K and Singh, Raghuvir (2012) Ceramic coatings by sol-gel method for corrosion protection of mild steel. In: National Congress on Corrosion Control, 23 – 25 August 2012, Kolkata.

Tiwari, S N and Sharma, R N and Prakash, S (1995) Fireside Corrosion in Boilers. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Varma, V N (2001) 100% Solid Polyurethane the Innovative Technology for Corrosion Protection. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Wasnik, D N and Samajdar, I and Kain, V and De, P K and Verlinden, B (2001) Corrosion and Grain Boundry Character Distribution(GBCD)in 316L Austenitic Stainless Steel. In: National Seminar on Corrosion and Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Yadav, M and Singh, K and Rastogi , R B and Singh, M M (2001) Substituted Thiobiurets as Corrosion Inhibitors for Mild Steel in L.ON Sulphuric Acid. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Yadav, P N and Kushwaha, S S (2001) Application of Polymer Complexes as Corrosion Inhibitor. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Other

Director, NML (1998) List of NML Technical reports. National Metallurgical Laboratory, Jamshedpur.

Director, NML (2010) NML Technology Handbook. National Metallurgical Laboratory, Jamshedpur.

Director, NML (1968) Processes developed at the National Metallurgical Laboratory for Commercial Exploitation. National Metallurgical Laboratory, Jamshedpur.

Srikanth, S (2015) CSIR-NML Equipment Facility Handbook. CSIR-National Metallurgical Laboratory, Jamshedpur.

Patent

76415 (1967) Process developed at the National Metallurgical Laboratory: Modification of Aluminium Silicion alloys - India Patents No. 76415. India Patents No. 76415.

Presentation Slide

Chattoraj, I (2013) Stress assisted corrosion. [Presentation Slide] (Submitted)

Sankara Narayanan, T S N (2010) Corrosion Science and Engineering. [Presentation Slide] (Unpublished)

Sankara Narayanan, T S N (2011) Tin plated contacts - Problems due to fretting corrosion and whisker growth. [Presentation Slide] (Unpublished)

Project Reports

Acharya, Bishnu Prasad and Tiwari, S K (2011) Electrochemical study of organic and inorganic hybrid coatings on Al-7075 (STR). Training Report (TR). NML, Jamshedpur. (Submitted)

Addanki Rao, S and Lahiri, A K and Banerjee, T (1961) Corrosion of Nickel tubes in the steam chest of Caustic soda evaporators. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Addanki Rao, S and Lahiri, A K and Banerjee, T (1961) Effect of addition of Sodium nitrate on the Corrosion of mild steel in fused and concentrated solutions of Caustic Soda. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Addanki Rao, S and Mukherjee, K P and Lahiri, A K and Banerjee, T (1961) Relative corrodibility of ferrous and non-ferrous metals exposed at Jamshedpur. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Khare, Priyank and Mishra, T (2012) Ultrasonic surface modification of mild steel for corrosion protection. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Krishnan, A A (1955) A New method of Stripping Corrosion product, scales, electroplating, etc. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Kumar, Sunil and Tiwari, S K (2012) Multilayer Alloy Coating on Mild Steel for Corrosion Resistance. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Mukherjee, K P and Lahiri, A K and Banerjee, T (1956) Atmospheric Corrosion of Metals and Alloys exposed at Jamshedpur. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Mukherjee, K P and Lahiri, A K and Banerjee, T (1961) Corrosion of Brine Storage Tank. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Sankara Narayanan, T S N and Satendra, Kumar (2011) Evaluation of corrosion performance of reinforcement steel. Sponsored (SSP). NML, Chennai Centre, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2010) Evaluation of the fretting corrosion behaviour of surface modified CP-Ti for biomedical applications (OLP-0126). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Studies on the Electrochemical Behaviour of Ti-Mo Alloys In Fluoride Medium to assess their Suitability for Dental Implant Applications (OLP-0073). Exploratory (OLP). NML, NML, Chennai Centre. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sarode, Anurag and Tiwari, S K (2011) Electrochemical study of organic and inorganic hybrid coatings on Al-7075 (STR). Training Report (TR). NML, Jamshedpur. (Submitted)

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, S K and Kumar, B Ravi and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, Swapan K and Ravi Kumar, B and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Singh, T B and Bhattamishra, A K and Tiwari, S K and Singh, Raghuvir and Bhattacharjee, S (2007) Enhancement of Surface properties of Metal substrates by Electroless Nickel Coating. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Surbhi, and Mishra, Suman K (2012) Deposition of Hard TI-Si-B-C Nano Composite Coatings on Steel by Magetron Sputtering:Microstructure, Mechanical and Thermal Behavior. Training Report (TR). CSIR -NML, Jamshedpur.

Swaminathan, J and Chattoraj, I and Gunjan, M K and Konar, J and Updhyay, A K (2007) Failure Analysis of air Pre-Heater Tubes. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Tiwari, S K and Singh, Raghuvir and Mishra, T and Das, Swapan K (2006) Sol-Gel Coatings on 316L for Surface properties Enhancement. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Verma, Devraj and Mishra, Suman K (2011) Deposition of Multilayered SI-C-N Nanocomposite Coatings from Single Target by Magnetron Sputtering for Engineering Applications. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Thesis

Kumar, Niraj (2012) The Effect of Laser Beam Overlapping on the Hardness and Microstructure of AISI 414O Steel at different Laser Power. Masters thesis, Ranchi University.

Kumar, Ravi (2014) Graphene Coated Stel. Masters thesis, NML.

Maity, S (2003) Study on naturally occurring minerals for the removal of arsenic from groundwater. PhD thesis, National Metallurgical Laboratory (NML) Jamshedpur.

Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.

Video

Mohanty, Ashok and Sahoo, K L (2012) Technological Interventions of Brassware Cluster at Moradabad by CSIR-NML. [Video]