Items where Subject is "Minerals and Mining"

A

Abhilash, (2008) Compedium of Lectures for Training Programme on Mineral Processing and Extractive Metallurgy. In: Compedium of Lectures for Training Programme on Mineral Processing and Extractive Metallurgy. CSIR-NML, Jamshedpur.

Abhilash, (2013) Interview in Down to Earth Magazine. Down to Earth Magazine, February . p. 41.

Abhilash, and Agarwal, Harshita and Meshram, Pratima and Meshram, Rohit B and Jha, Soni and Patel, J N and Soni, M K and Rokkam, Kiran and Mashruwala, Sheeba (2021) Green process for recovery of vanadium from hazardous spent contact process catalyst by oxalic acid: kinetics and mechanism. Separation Science and Technology (1.75).

Abhilash, and Ghosh, Anirban and Sarkar, Supriyo and Pandey, B D (2015) Microbial Variants from Iron Ore Slimes: Mineral Specificity and pH Tolerance. Indian Journal of Microbiology, 55(4) (IF-0.899). pp. 430-449.

Abhilash, and Hedrich, Sabrina and Schippers, Axel (2021) Distribution of scandium in red mud and extraction using Gluconobacter oxydans. Hydrometallurgy, 202 (3.356).

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2011) Bioleaching - An Alternate Uranium Ore Processing Technology for India. Energy Proceedia, 7 . pp. 158-162.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2007) Amenability of low- grade uranium towards column bioleaching by acidithiobacillus ferrooxidans. In: International Seminars in Mineral Processing Technology (MPT 2007), 2007.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2010) Bioleaching - an alternate uranium ore processing technology for India. In: 2nd International conference on Asian nuclear prospects, 11-13 October 2010, Mamallapuram, Chennai, India.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2010) Column Bioleaching of a Low-Grade Silicate Ore of Uranium. Mineral Processing and Extractive Metallurgy Review, 31 (4). pp. 224-235.

Abhilash, and Meshram, Pratima (2019) Recovery of Rare Earth Elements from Metallurgical Wastes. In: Sustainable and Economic Waste Management-Resource Recovery Techniques. CRC Press, Australia, pp. 247-262. ISBN 9780367232559

Abhilash, and Meshram, Pratima and Sarkar, Supriyo and Venugopalan, T (2017) Exploring Blast Furnace Slag As A Secondary Resource For Extraction Of Rare Earth Elements. Minerals & Metallurgical Processing Journal, 34(4) (IF-0.692). pp. 178-182.

Abhilash, and Meshram, Pratima and Sinha, S and Pandey, B D and Kumari, V K and Kar, S (2019) Chloride leaching of lanthanum and cerium from Indian red mud and metal separation studies. Metallurgical Research & Technology, 116(2) (IF-0.641).

Abhilash, and Pandey, B D (2012) Biohydrometallurgical Processing of Indian Uranium Ores. PhD thesis, Jadavpur University.

Abhilash, and Pandey, B D (2013) Bioreactor leaching of uranium from a low grade Indian silicate ore. Biochemical Engineering Journal, 71 (IF-2.645). pp. 111-117.

Abhilash, and Pandey, B D (2015) Environmental Processing of Zn Containing Wastes and Generation of Nanosized Value-Added Products. In: Bio-Nanoparticles: Biosynthesis and Sustainable Biotechnological Implications. Bio-Nanoparticles, 1 . Wiley Blackwell, Philadelphia, US, pp. 225-253. ISBN 978-1-118-67768-1

Abhilash, and Pandey, B D (2013) Microbial processing of apatite rich low grade Indian uranium ore in bioreactor. Bioresource Technology, 128 (IF-4.980). pp. 619-623.

Abhilash, and Pandey, B D (2011) Role of ferric ions in bioleaching of uranium from low tenor Indian ore. Canadian Metallurgical Quaterly, 50 (2). pp. 102-112.

Abhilash, and Sinha, Manish K and Sinha, Shivendra and Pandey, B D (2014) Extraction of lanthanum and cerium from Indian red mud. International Journal of Mineral Processing, 127 (IF-1.461). pp. 70-73.

Abhilash, and Sinha, Shivendra and Meshram, Pratima and Pandey, B D and Behera, P K and Satapathy, B K (2014) RedMud: A Secondary Resource for Rare Earth Elements. In: International Bauxite, Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, India.

Abraham, M C and Ghosh, A (1973) Kinetics of Reduction of Iron Oxides and Ores by Carbon. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Acharya, S and Jena, M S and Mohanty, J K (2010) Aqueous alkaline processing of chromite mine overburden. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Achimovičová, M and Baláž, Peter and Rečnik, A and Kováč, J and Rečnik, A and Kováč, J and Feldhoff, A and Gock, E (2011) Mechanochemical synthesis of nanocrystalline lead selenide. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Adeleke, A A and Odusote, J K and Lasode, O A and Ikubanni, P.P. and Malathi, M and Paswan, D (2019) Densification of coal fines and mildly torrefied biomass into composite fuel using different organic binders. Heliyon, 5(7) (Cite Score-1.66).

Agarwal, Sanjay and Ghorai, S and Pal, J and Ghosh, Dinabandhu (2013) Chromite ore fines sintering for ferrochrome production. In: 26th National convention of metallurgical and material engineers & National seminar LGO 2013 of Institution of Engineers (India), 22-23rd January, Jamshedpur.

Agarwal, Sanjay and Kim, Hong-In and Park, Kyung-Ho and Lee, Jin-Young (2017) Monazite Mineral Processing. In: Mineral Processing Methods, Applications and Technology, Geology and Mineralogy Research Development. Nova Science Publishers, Inc. New York, USA, NEW YORK, USA, pp. 39-56. ISBN 978-1-53612-893-2 (eBook)

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Effect of SiO2 on the reduction of chromite sinter for ferrochrome production. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2014, 12-15 November 2014, College of Engineering, Pune (COEP).

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Sintering of chromite ore fines for its utilization in arc furnace for ferrochrome production. In: 13th Iron and Steel summit, 25-26th September, 2015, Raipur, India.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Utilization of low grade chromite ore fines to recover chromium as charge-chrome. In: 20th National conference on Non-ferrous minerals and metals-2016, 8-9th July, 2016, Jamshedpur .

Agarwal, Sanjay and Sahu, K K and Godiwalla, K M and Jana, R K (2012) Manganese distribution between alloy & slag phases in making Fe-Si-Mn alloy from polymetallic sea nodules. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Agarwal, Sanjay and Sahu, K K and Godiwalla, K M and Jana, R K (2011) Studies on the Production of Ferro-Silico-Manganese Alloy in Arc Furnace from Polymetallic Sea Nodule. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India.

Agarwal, Sanjay and Sahu, K K and Godiwalla, K M and Rajak, D K and Smita, K and Jana, R K (2010) An experimental and thermodynamic study on reduction smelting of sea nodules to recover valuable metals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Agrawal, A and Kumar, Vinay and Pandey, B D (2006) Remediation options for the treatmentf electroplating and leather tanning effluent containing chromium - A review. Mineral Processing & Extractive Metalllurgy, 27 . pp. 99-130.

Agrawal, A and Pathak, Pankaj and Mishra, D and Sahu, K K (2011) Recovery of metal values from spent nickel-cadmium rechargeable batteries by solvent extraction route. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Agrawal, A and Perween, M and Pramanick, Shubhajit and Sahu, K K (2011) Recovery of copper from PCB leach solution by solvent extraction. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Agrawal, B B and Prasad, K K and Ray, H S (2000) Utilisation of Iron Oxide Waste through Cold Bonded Pelletisaion. In: International Symposium on Processing of fines - Vol.2, 2000, NML Jamshedpur, Jamshedpur.

Ajita, Kumari and Vasumathi, N and Vijaya Kumar, T V (2022) Flotation Studies on Optimization of Carbon Recovery from Steel Plant Sludge. In: Abstracts of the International Chemical Engineering Conference 2021 (ICheEC2021) , September 17-19, 2021, Online.

Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2017) c. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151.

Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2018) Overview On Extraction and Separation of Rare Earth Elements from Red Mud: Focus on Scandium. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151.

Akerkar, D D (1985) Some Observations on the Processing of the Polymetallic Sea nodules at the National Metallurgical Laboratory. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur.

Alex, T C and Godiwalla, K M and Kumar, S and Jana, R K (2007) Extraction of silicomanganese from marine and low grade mineral resources. In: XI International Ferro Alloy Congress, Feb. 18-27, 2007, New Delhi.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2013) High Energy Milling of Boehmite: Changes in Particulate Characteristics. In: Proceedings of the XIII International Seminar on Mineral Processing Technology (MPT-2013), 10-12 December, 2013, IMMT, Bhubaneswar.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2016) Mechanical Activation of Al-oxyhydroxide Minerals–A Review. Mineral Processing and Extractive Metallurgy Review, 37(1) (IF-1.219). pp. 1-26.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2012) Mechanical Activation of Al-Oxyhydroxide Minerals – Physicochemical Changes, Reactivity and Relevance to Bayer Process. In: LIGHT METALS 2012. TMS (The Minerals, Metals and Materials Society), pp. 15-19. ISBN 978-1-11829-139-9

Alex, T C and Srivastava, J P and Srikanth, S and Premchand, (1997) Pelletisation of reactant dosed laterite. In: Processing of fines: Proceedings of the national seminar, Jan 9-10, 1997, NML Jamshedpur, India.

Ali, Malek and Basu, Projjal (2011) Synthesis of nanostructured titanium carbide from titanium oxide and Ferro-titanium through mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Altekar, V A (1985) Presidential Address. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Altekar, V A (1973) Sponge Iron Technology - Efforts at the National Metallurgical Laboratory. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Altekar, V A (1973) Welcome Address. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Altekar, V A and Gupta, K N and Paul, B K and Soni, V K (1973) Naphtha Reduction of Iron Ores to Sponge Iron in Continuous Vertical Reactor. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Alva, K P and Khare, N B (1985) Sampling in Coal Handling and Preparation Plants. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213.

Andersen, Hans Chr (1973) Submerged Arc Furnace, an Alternative for Smelting of Sponge Iron? In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Anjali, Kumari and Pandey, R K (2011) Clean coal technology—a technical response to the environmental challenges. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Ansari, M I (1997) Fine Particle Processing - A difficult Problem for Mineral Engineers. In: UNSPECIFIED.

Ansheng, Feng and Huipeng, Yang and Quingyu, Lei and Anzhou, Yu (2006) New Technique of High-Efficiency Concentration of Magnetite- Magnetic Field Screening Method. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Antoine, J and Astier, Jacques (1973) The Increasing use of Prereduced Iron Ores in Electric Arc Furnaces. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Anupam, A and Singh, G and Raghav, P K and Suresh, N (2010) Studies on beneficiation of BHQ samples by different methods. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Arif, Md and Dey, Sukanta and Gond, Arvind K and Zong, Kequing and Liu, Yongsheng and Mitra, Anirban and Mitra, Aniruddha and Sarangi, Shushanta (2021) Mesoarchean continental intraplate volcanism and sedimentation: The case of the Simlipal basin, Singhbhum Craton, eastern India. Precambrian Research, 361 (IF-4.725). p. 106245.

Arora, Punit and Gupta, S K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2016) Testing and assessment of fatigue life prediction models for Indian PHWRs piping material under multi-axial load cycling. International Journal of Fatigue, 85 (IF-2.899). pp. 98-113.

Aruna, V A J and Goswami, S N and Bawane, P R and Ram, Mohan and Gundewar, C S (2010) Enhancing chalcopyrite flotation by tackling hydrophobic silicate gangue. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Aruna, V A J and Shende, S M (2006) Floc-Flotation of Chalcopyrite from a Low Grade Cu-Zn Ore. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Asnani, C K and Ramachandran, K and Sarma, G V S N and Kulkarni, A P (2002) Ultrasonic Cleaning and Re-use of HEPA Filters in Nuclear Fuel Manufacturing Facility. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25, January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur.

B

Bagchi, S and Raychaudhuri, K K and Raja, K (1973) Indian Coals for Sponge Iron Process. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Baidya, B K and Kumar, Sanjay and Bhat, K L (1997) Extraction of manganese from manganese and iron sea nodules. NML Technical Journal, 39 (3). pp. 177-181.

Balasubramanian, K J and Bhaskar Raju, G and Khangaonkar, P R (1990) Flocculation of iron ores using magnafloc polymers. Ind. Min. and Engg. Journal, July . pp. 7-13.

Baláž, Peter and Dutková, Erika (2011) Applied mechanochemistry of solids (a review). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Bandopadhyay, A (2008) Environmental Issues in Metal Extraction. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Bandopadhyay, A (2000) Multi-gravity Separator An Equipment for Separation of Fines. In: International Symposium on Processing of Fines, 2000, CSIR - National Metallurgical Laboratory, Jamshedpur.

Bandopadhyay, A and Singh, K K (1997) Control of Pollution created by suspended particulate matters (SPM) from small and Medium scale Iron and Steel and Refractory industries - The dry and wet options. In: UNSPECIFIED.

Bandopadhyay, P (1998) Coal Flotation : The Status and Outlook. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Bandyopadhyay, G K and Rao, T C (1972) Application of statistics in Mineral Engineering. NML Technical Journal, 14 (2). pp. 37-43.

Banerjee, Amit and Mishra, P R and Mohanty, Ashok and Chakravarty, K and Das Biswas, Rupa and Sahu, Rina and Chakravarty, S (2016) Distribution of mineral species in different coal seams of Talcher coalfield and its transformation behavior at varying temperatures. International Journal of Coal Science & Technology, 3(2) (SNIP-3.554). pp. 97-103.

Banerjee, S K and Narayanan, P I A (1957) Concentration of Indian Chrome Ores by Ore-dressing Methods. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

Banerjee, S K and Subramanya, G V and Narayanan, P I A (1960) Reduction of iron oxide content in a bauxite sample from roadside mine Jabalpur district Madhya Pradesh. Other (TMP). CSIR NML.

Banerjee, T (1957) Electrolytic Manganese & Manganese Dioxide from Low-grade Indian Ores. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

Banerjee, T and Bhatnagar, P P (1957) Application of Physico-chemical Principles in Extraction Metallurgy. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

Banerjee, T H and Sengupta, A K and Ram, Mohan (2010) Beneficiation of titaniferrous iron ore sample. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Banerjee, T H and Sengupta, A K and Sutaone, A T and Gundewar, C S (2006) Beneficiation Practices in the Sukinda Valley Area Chromite Deposits. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Bar, H N and Dayal, V and Barnard, D and Hsu, D K (2010) Plate Wave Resonance with Air-Coupled Ultrasonics. Review of Progress in Quantitative Nondestructive Evaluation, 29A 29B (1211). pp. 1069-1076.

Bara, Nikhil Anurag and Agarwal, Sanjay (2011) Study the overall aspects of Electric Arc Furnace operation. Training Report (TR). CSIR-NML, Jamshedpur.

Barat, K and Sivaprasad, S and Kar, S K and Tarafder, S (2019) Low‐cycle fatigue of IN 718: Effect of waveform. Fatigue & Fracture Of Engineering Materials And Structures . pp. 1-10.

Barnwal, J P and Jain, A and Srivastava, A and Majumder, A K (2006) Fluidized Bed Separators - A Comprehensive Review. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Baruah, B P and Khare, Puja and Dutta, D K and Dutta, N N (2010) Nagaland coals: suitability as an energy source. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 64-68.

Baruah, B P and Khare, Puja and Rao, P G (2011) Management of acid mine drainage (AMD) in Indian coal mines. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Basavaraj, and Chary, T P R and Rao, B S S (2006) Preconcentration and Heavy Minerals Separation with Low Grade Beach Sand Sample from Narsapur Coast, West Godavari District, Andhra Pradesh. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Basu, D K and Khan, D K (1972) Short communication on role of different variables on atmospheric corrosion in marine environment-Effect of proximity to sea. NML Technical Journal, 14 (1). pp. 34-36.

Beato-lopez, J J and De la cruz blas, Ca and Mitra, Amitava and Gomez-polo, C (2016) Electrical model of giant magnetoimpedance sensors based on continued fractions. Sensors and Actuators A - Physical, 242 (IF-2.499). pp. 73-78.

Beck, T A and Rao, G N and Altekar, V A (1979) Effect of additives on hot strength retained strength and breakdown properties of sodium silicate bonded sands. NML Technical Journal, 21 (1-2). pp. 6-10.

Beena, R and Sathish, P and Jyotsna, T and Pradip, (2006) Wetting Characteristics of Oleate Monolayers Adsorbed at Calcium Mineral Surfaces:a Molecuar Dynamics Study. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Behari, M (1997) Global scenario of magnesium metal. NML Technical Journal, 39 (3). pp. 105-115.

Behera, R K and Rout, K and Das, N N (2010) Mineralogical characterization and sorption properties of goethite rich iron ore from daitari, Orissa, India. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), I . pp. 16-23.

Behera, R K and Rout, K and Nayak, B and Das, N N (2012) Removal of Selenium and Arsenic Oxyanions using Natural Goethite-Rich Iron Ore from Daitari, Orissa, India: Effect of Heat Treatment. Adsorption Science & Technology, 30(10) (IF-0.559). pp. 867-880.

Beisembetov, I K and Kenzhaliev, B K and Zakharova, N A and Dosymbaeva, Z D (2010) Study and development of advanced technology for silver sorption recovery from multicomponent leaching solutions. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Besra, L and Sengupta, D K and Roy, S K (2010) Influence of flocculant overdosing on solid/liquid separation properties. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Besterci, Michal and Sülleiová, Katarína and Velgosová, Oksana (2011) Mechanical alloying of Al-C system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Bhagat, R P (1996) Adsorption of H+/OH- and Sulfonate Ions on Hematite. Metals Materials and Processes, 1996, 8 (4). pp. 323-328.

Bhagat, R P (1991) Application of Statistical Analysis in Sintering and Blast Furnace Iron Making. In: International Conference on Advances in Chemical Metallurgy, Jan 9-11, 1991, BARC, Mumbai.

Bhagat, R P (2007) De-Watering of Iron Ore Fine Particles in Aqueous Medium. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Bhagat, R P (1997) Effect of flux granulometry and other process variables on the sintering of iron ore at high basicity. In: Processing of fines: Proceedings of the national seminar, Jan 9-10, 1997, NML Jamshedpur, India.

Bhagat, R P (1992) Effect of Screening and Recirculating Fines from the Blast furnace Sinter on the Strand Productivity vis a vis Improvement in mean size of Sinter. Effect of Screening and Recirculating Fines from the Blast Furnace . pp. 47-53.

Bhagat, R P (1995) Effect of Solid Concentration on Settling of Unflocculated Iron ore Slimes in Compression Zone. Steel India, 18 (2). pp. 55-58.

Bhagat, R P (1994) Effect of Solid Concentration on Settling Rate of Iron Ore(Slimes). Steel India, 17 (1). pp. 36-39.

Bhagat, R P (1997) Electrokinetic Phenomena in Relation to adsorption of Surfactants on Hematite and Quartz Minerals. Steel India, 20 (2). pp. 47-51.

Bhagat, R P (1998) Flocculation of Iron ore Slimes using Synthesised Starch-g-Acrylamide Copolymer. Steel India, 21 (2). pp. 43-48.

Bhagat, R P (1989) Heat Transfer Consideration for Improvement in the Sintering Indices. Ironmaking conference proceedings-1989, . pp. 481-490.

Bhagat, R P (2007) Improved gravity separation : typical case studies in relation to slimes. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur.

Bhagat, R P (2011) Improvement in Quality Parameters of Super-Fluxed Sinter from Indian Iron Ores: NML’s Experience. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Bhagat, R P (2011) Inter-influencing factors in affecting BF coke rate – statistical approach. In: Proc. : Inter. Conf. on Energy Efficiency in Steel Industry (EESI-2011), Org. by SAIL-RDCIS Ranchi, Bureau of Energy Efficiency Min. Of Power, Gov. of India New Delhi, Indian Institute of Metals, Ranchi Chapter, December 14-16, 2011, Ispat Bhawan, Ranchi.

Bhagat, R P (2001) Kinetics of sodium dodecyl benzene sulfonate adsorption on hematite and its interaction with polyacrylamide. Colloid and Polymer Science, 279 (1). pp. 33-38.

Bhagat, R P (2011) Modeling of air flow through sinter mix bed. In: Proc. : Inter. Conf. on Mathematical Modelling and Application to Industrial Problems (MMIP-2011), Org. by Dept of Mathematics, March 28-31, 2011, National Institute of Technology, Calicut , Kerala .

Bhagat, R P (1985) Performance Analysis of a Blast Furnace at Bhilai Steel Plant. In: International Conference on Progress in Metallurgical Research: Fundamental and Applied Aspects, Feb, 1985, IIT Kanpur, India.

Bhagat, R P (1996) Thermodynamics of Polymeric Flocculant adsorption on Hematite and other Mineral Surfaces. Steel India, 19 (1). pp. 11-17.

Bhagat, R P and Banerjee, B and Saha, P and Mukherjee, B C (2006) Dry Magnetic Separation of Bauxite Ore. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Bhagat, R P and Biswas, A K and Gandhi, K S (1989) Preparation and Characterisation of Flocculating Polymers. Steel India, 12(2) . pp. 66-72.

Bhagat, R P and Chattoraj, U S and Goswami, M C and Singh, D P and Sil, S K (2007) Effect of size parameters of mix ingredients on the porosity and reduction characteristics of sinter. Steel Research International, 78 (6). pp. 451-454.

Bhagat, R P and Ray, H S and Gupta, S K (1988) Effect of Some Process Parameters on the Performance of a Sintering Plant at Bhilai Steel Plant a Statistical Analysis. Transactions of the Indian Institute of Metals, 41(5) . pp. 465-474.

Bhagat, R P and Sil, S K and Chattoraj, U S and Goswami, M C and Singh, D P and Das, B K (2006) Pot Sintering Studies for Improvement in Reducibility and RDI Values of Sinter. Steel India . pp. 127-134.

Bhagat, R P and Sil, S K and Srivastava, J P (2002) Effect of Polymeric Additive and other Variables on Efficiency of Grinding of Limestone. Trans. Instn Min. Metall. (Sect. C: Mineral Process. Extr. Metall.), 111 (3). pp. 160-162.

Bhagat, R P and Vidyadhar, A and Rao, K V and Rath, R K and Vijaya Kumar, T V and Kumar, Vinod and Kumari, Neha (2012) Physico-chemical studies on the oxide mineral systems in the presence of surfactants and polymers for beneficiation of iron ores. Grant in Aid (GAP). CSIR-NML, Jamshdpur. (Submitted)

Bhagat , R P (2007) Fundamentals of Iron Ore Sintering. In: Processing of Iron Ore , Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Bhagat , R P and Ray, H S and Gupta, S K (1992) A Relationship between Strength of Sinter and the Ratio of Return Fines output to Return Fines Input. NML Technical Journal, 34 (3-4). pp. 17-22.

Bhanawat, S C and Ramarao, V V and Vishwanath, U (2010) Development of a fast and accurate method for testing of nigrosine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Bhardwaj, O P and Bandyopadhyay, A and Khare , R N and Rao, T C (1985) Improvement in Grinding and Classification Circuit by the use of Hydrocone at Rakha Concentrator. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur.

Bharti, Amishi and Kumar, Gautam and Sinha, Moni and Chakraborty, D S (2010) Characterization of sinter return fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Bhaskar, J Sarmah and Saikia, Pranjal and Goutam, Prasanta J and Sengupta, Pinaki and Mahiuddin, Sekh and Saikia, Pradip C and Borthakur, Prakash C (2006) Dispersion and Upgradation of Limestone from new Umrangshu, Assam, India. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Bhaskar, K Udaya and Murthy, Y Rama and Rao, K Kosala and Banerjee, P and Rao, T S V C and Srivastava, J K and Ramakrishnan, N (2006) Classification of Ultra Fine Particles from Fly Ash. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Bhaskar, K Udaya and Murthy , Y Rama and Srivastava, J K and Ramakrishnan, N (2006) CFD Simulation Studies on a 19 Cone Angle Hydrocyclone. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Bhaskar, K Udaya and Raju, M Ravi and Rao, K Kosala and Banerjee, P and Srivastava, J K and Barnwal, J P (2006) Characterization Studies on Lead-Zinc Tailings from Rampura-Agucha Mines. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Bhaskar, K Udaya and Raju, M Ravi and Srivastava, J K and Ramakrishnan, N (2006) CFD Analysis of Water Flow Behaviour Inside a Falcon Bowl. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Bhaskar, K Udaya and Rao, K Kosala and Banerjee, P and Murthy , Y Rama and Raju, M Ravi and Barnwal, J P (2006) MGS Studies for Recovering Iron and Silver Values from Lead-Zinc Tailings. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Bhaskar, Udaya and Govindarajan, B and Barnwal, J P and Rao, T C and Rao, K K (2000) Performance Evaluation of Water-Injection Cyclone Treating a Synthetic Mixture. In: UNSPECIFIED.

Bhaskar Raju, G (2008) Beneficiation of low-grade iron ores. Mining Engineers Journal, March . pp. 18-23.

Bhaskar Raju, G (2009) Recent developments in flotation for the beneficiation of lowgrade finely disseminated ores. Mining Engineers Journal (December). pp. 11-23.

Bhaskar Raju, G and Balasubramanian, K J and Khangaonkar, P R (1990) Zeta potential and flocculation behavior on iron ore fines using magnafloc polymers. Bulletin of Electrochemistry, 6 (10). pp. 836-839.

Bhaskar Raju, G and Forsling, Willis (1991) Adsorption mechanism of diethyldithio carbamate on covellite, cuprite and tenorite. Colloids and Surfaces, 60 . pp. 53-69.

Bhaskar Raju, G and Forsling, Willis (1997) Adsorption of thiol collectors on Chalcopyrite. Journal of Surface Science Technology, 13 (1). pp. 25-37.

Bhaskar Raju, G and Forsling, Willis (1992) Electrokinetic studies on covellite, cuprite and tenorite. Bulletin of Electrochemistry, 8 (8). pp. 402-406.

Bhaskar Raju, G and Hanumantha Rao, K and Forsling, Willis (2012) Role of dextrin in the selective flotation of fluorite. SGAT Bulletin, 13 (1) . pp. 37-46.

Bhaskar Raju, G and Khangaonkar, P R (1984) Electroflotation-A critical review. Transactions of the Indian Institute of Metals, 37 (1 ). pp. 59-66.

Bhaskar Raju, G and Khangaonkar, P R and Prabhakar, S (1987) Separation of minerals by electroflotation. Bulletin of Electrochemistry, 3 (1 ). pp. 37-40.

Bhaskar Raju, G and Parthiban, V and Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S (2014) Separation of sillimanite from beach sands contaminated with shell. International Journal of Scientific Engineering and Technology, 3(4) (IF-1.852). pp. 320-325.

Bhaskar Raju, G and Prabhakar, S and Hanumantha Rao, K and Sankaran, C and Forsling, Willis (1991) Utilisation of Mineral Slimes and Industrial Waste by Electro Flotation and Selective Flocculation. In: Mineral Development and Environment, 28-30 November 1991, Dhanbad, India.

Bhaskar Raju, G and Prabhakar, S and Jolly Kutty, K G and Khangaonkar, P R and Sankaran, C (1991) Cold bonded pelletization of iron ore fines. In: Third Int Symposium on beneficiation and agglomeration, 16-18 January 1991, Bhubaneswar.

Bhaskar Raju, G and Prabhakar, S and Khangaonkar, P R (1988) Beneficiation of Low Grade Ores by Electro-Column Flotation Technique. In: Column Floation "88", January 25-28, Phoenix, Arizona, USA.

Bhaskar Raju, G and Prabhakar, S and Khangaonkar, P R (1988) Studies on the beneficiation of copper oxide minerals. In: XVI International Mineral Processing Congress, June 5-10, 1988, Stockholm.

Bhaskar Raju, G and Prabhakar, S and Mehrotra, S P and Vora, S B (2005) Circuit simplification by adopting flotation columns. In: Emerging Trends in Mineral Processing and Extractive Metallurgy, 13-14 June, 2005, Bhubaneswar.

Bhaskar Raju, G and Prabhakar, S and Rao, S Subba (2004) Studies on the Beneficiation of Barite. In: International Seminar on Mineral Processing Technology (MPT - 2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa.

Bhaskar Raju, G and Prabhakar, S and Sankaran, C and Vora, S B (1997) Pilot scale studies on the beneficiation of complex sulphides by flotation column. In: Recent advances in metallurgical processes, 16th-19th July 1997, Bangalore.

Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2004) Development of indigenous column flotation technology at NML for the beneficiation of low-grade ores. Metals Materials and Processes, 16 (2-3). pp. 143-156.

Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Sankaran, C (1999) Beneficiation of Gold Ore by Flotation Column: A Pilot Scale Study. In: Beneficiation, agglomeration and environment, 20-22 January 1999, Bhubaneswar.

Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Vijayakumar, T V and Vasumathi, N and Suhasini, S and Ashish Kumar, M and Shiva Kumar, S (2015) Evaluation of Flotation Collectors in Developing Zero Waste Technology for Processing Iron Ore Tailings. International journal of Engineering Research, 4(11) ( GIF-0.421). pp. 604-608.

Bhaskar Raju, G and Subrahmanyam, T V and Sun, Z and Forsling, Willis (1991) Shear flocculation of quartz. International Journal of Mineral Processing, 32 . pp. 283-294.

Bhattacharjee, G and Das, Avimanyu (2011) Benefication of Low Grade Iron Ore. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Bhattacharrya, P and Nayak, B and Singh, R and Maulik, S C (2005) Studies on Beach Placers of Kerala Coast. In: International Seminar on Mineral Processing Technology (MPT-2005), January 6-8, 2005, Dhanbad.

Bhattacharryya, K K and Sil, S K and Chattoraj, U S and Maulik, S C (2004) An Approach to Beneficiation of Apatite Ore of Purulia. In: International Seminar on Mineral Processing Technology (MPT -2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa.

Bhattacharya, Madhusmita (2011) Isolation and purification of bacteria from bauxite and iron ore mine samples. Masters thesis, National Metallurgical Laboratory (NML).

Bhattacharya, S and Dey, Shobhana (2008) Evaluation of frother performance in coal flotation- A critical review of existing methodologies. Mineral Processing and Extractive Metallurgy Review, 12 (2-4). pp. 108-129.

Bhattacharya, S and Dey, Shobhana and Ahmad, Zahid (2004) Frother Dependency in Coal Flotation. In: International Seminar on Mineral Processing Technology (MPT-2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa.

Bhattacharya, Sumantra and Dey, Shobhana (2010) An operator friendly performance index for frother selection and optimization in coal flotation. In: XVI International Coal Preparation Congress, 2010, Lexington, UK.

Bhattacharyya, K K and Reddy, P S R and Kumar, S G and Sastri, S R S and Narasimhan, K S (1985) Characterisation and Beneficiation of some Indian Coal Fines. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Bhattacharyya, P and Bhattacharyya, K K and Kumar, Vinod and Nayak, B and Mohandas, P N and Vidyadhar, A and Swamy, Narayana and Chattoraj, U S and Maulik, S C (2006) Studies on Medium Grade Ilmenite-Depleted Beach Placer deposit of Chavakkad Ponnani Coast, Kerala. In: International Seminar on Mineral Processing Technology (MPT-2006), March 8-10, 2006, Chennai.

Bhattacharyya, P and Chakrabarti, D M and Sarkhel, B R and Saha, P and Chattoraj, U S and Banerjee, B (1997) Modified hydrocycloning for effective elimination of stubborn slimes. In: UNSPECIFIED.

Bhattacharyya, P and Dasgupta, P and Kar, D and Bhattacharjee, R N and Ghosal, S and Paul, A R (2000) A New process for the Enrichment of Nickel in Sukinda Chromite Overburden ore. In: UNSPECIFIED.

Bhattacharyya, P and Nayak, B and Kumar, Vinay (2008) Prospects of beach sands of Karnataka Coast. Journal of Metallurgy and Materials Science, 50 (3). pp. 167-173.

Bhattacharyya, P and Sil, S K and Saha, P and Maulik, S C (2000) Recovery of values from barite sludge using Multi-gravity Separator. In: UNSPECIFIED.

Bhattacharyya, P and Singh, R and Kumar, Vinod and Chattoraj, U S and Bhattacharyya, K K and Roychaudhury, A (2007) Studies on Efficacy of Multi Gravity Seperator for Beneficiation of Indian Coal Fines. Mineral Processing Technology . pp. 1-5.

Bhattacharyya, P and Singh, R and Sil, S K and Sengupta, S K and Saha, P and Srivastava, J P and Maulik, S C (2002) Reduction of Environment Pollution in Processing of Barite. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Bhattacharyya, P and Singh, Ratnakar (2011) Generation of Value Added Product by Beneficiation of Barite Waste. In: Conference Proceedings on XII Internation Conference on Mineral Processing Technology MPT-2011, October 20-22, 2011, Udaipur, India.

Bhaya, H (1973) Speech Delivered. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Bhima Rao, R and Charan, T G and Sastri, S R S (1985) Characterisation and Response to Beneficiation of Ferruginous Chromite Ores. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Bhowmick, T and Nayak, B and Verma, A K (2017) Chemical and mineralogical composition of Kathara Coal, East Bokaro Coalfield, India. Fuel , 208 (IF-4.601). pp. 91-100.

Bhunia, D and Mehrotra, S P and Shekhar, R (2006) A novel probe for measuring current distribution in Wood's metal in a simulated Hall–Heroult cell. Mineral Processing and Extractive Metallurgy, 115 (4). pp. 206-212.

Biswas, A C and Padhi, K K and Bhattacharya, H P (1976) Simultaneous sequential spectrophotometric method for the determination of silica and alumina in iron ores and sinters. NML Technical Journal, 18 (2). pp. 25-27.

Biswas, A K (1998) Role of Characterisation in Mineral Seperation by Froth Flotation. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Biswas, D K and Singh, S D and Mishra, K K and Ramachandrarao, P (1999) Pollution free operation of foundry industries. NML Technical Journal, 40 (2). pp. 43-56.

Biswas, R K and Jana, R K and Habib, M A and Hasan, M M (2006) Processing of copper dust for tolerable iron containing electrolyte. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 115 (4). pp. 234-240.

Biswas, Somjeet and Singh, Satyaveer D and Suwas, Satyam (2011) Microstructure and texture evolution of Pure magnesium during ecae. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Borah, Sarat Ch and Das, Manash R and Tamuly, Chandan (2010) Characterization of graphite deposits of Arunachal pradesh. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Boranbaev, B M and Srinivasan, T M and Datta, S S and Kakkar, N K and Bhagat, R P and Choudhury, B Roy and Dharanipalan, S and Thakur, D S and Tripathi, V N and Das, Narayan (1982) Sinterability of Various Ore Fines used at Bhilai Steel Plant. Steel India, 5(2) . pp. 115-123.

Boranbaev, B M and Srinivasan, T M and Dutta, S S and Kakkar, N K and Bhagat, R P and Choudhury, B Roy and Dharanipalan, S and Jha, J B and Das, Narayan and Chatterjee, B K and Thakur, D S (1982) Investigations on the Process of Ignition of Sinter Mix of Bhilai. Steel India, 5(2) . pp. 110-114.

Boteva, Antoaneta (2000) New Reagent for Fine Gold Recovery during Copper Ores Processing. In: UNSPECIFIED.

Brahma, P and Dutta, S (2011) Novel transport properties of nanostructured α-Fe2O3. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Buche, S D and Prakash Rao, M S (1985) Beneficiation of Iron ore Slimes. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

C

Cassandra Austen, I and Chennakesavulu, K and Reddy, G R and Vasumathi, N and Kumari, Ajita and Gharai, Mousumi and Kumar, T A and Vijaya Kumar, T V (2024) Utilizing a sustainable surfactant from Cucurbita pepo seeds for eco‑friendly flotation of non‑coking coal in sustainable energy applications. Biomass Conversion and Biorefinery .

Chaira, D and Mishra, B K and Sangal, S (2011) Synthesis and characterization of nanocrystalline carbides By reaction milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chakladar, S and Banerjee, Riya and Mohanty, Ashok and Chakravarty, S and Patar, Prasanjeet (2020) Turpentine oil: a novel and natural bridging liquid for agglomeration of coal fines of high ash coals. International Journal of Coal Preparation and Utilization, online (IF-2.034).

Chakladar, S and Chakravarty, S and Mohanty, Ashok and Alex, T C and Kumar, Sanjay (2020) Quality improvement of heat altered coals: A preliminary feasibility study. Environmental Technology & Innovation, 18 (IF-2.800). p. 100764.

Chakrabarti, D M (1972) Heavy media hydrocyclones in mineral beneficiation. NML Technical Journal, 14 (4). pp. 129-136.

Chakrabarti, D M (2000) Simple Approach to Estimation of the Work Index. Transaction of the Institute Min. Metall.(Sect. C: Mineral Process. Extr. Metall, 109 (2). pp. 83-89.

Chakraborty, Debadi (2006) Numerical Study of Water Mixing in a Conventional Flotation Cell. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Chakraborty, Debarun and Goswami, M C and Bhagat, R P (2010) Effect of process variables on sintering indices in relation to high LOI hematite ore fines of Gua mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chakraborty, S P and Menon, P R and Sharma, I G and Bose, D K (1997) Recovery of vanadium values from titaniferrous magnetite ore of masanikere origin. NML Technical Journal, 39 (2). pp. 87-92.

Chakravarti, P B and Banerjee, T (1957) Electrolytic Extraction of Beryllium-oxide from Beryl. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techinques, Feb. 1957, NML, Jamshedpur.

Chakravarty, K and Mishra, V and Chakravarty, S and Chakladar, S and Saxena, V K and Bhattacharya, S (2019) Mineralogical Study of Beneficiated and Carbonized Indian Coking Coal for Better Utilization: A Case Study. Natural Resources Research (IF-2.000). pp. 1-20.

Chakravarty, K and Mishra, V and Chakravarty, S and Chakladar, S and Saxena, V K and Bhattacharya, S (2020) Mineralogical Study of Beneficiated and Carbonized Indian Coking Coal for Better Utilization: A Case Study. Natural Resources Research, 29 . pp. 2431-2450.

Chakravarty, S and Bhattacharyya, P and Chatterjee, S S and Singh, B N (2000) Utilisation of Iron ore Fines in Alternative Iron making processes - An Indian perspective. In: UNSPECIFIED.

Chakravarty, S and Mohanty, Ashok and Banerjee, Amit and Tripathy, R and Mandal, G K and Basariya, M R and Sharma, Mamta (2015) Composition, mineral matter characteristics and ash fusion behavior of some Indian coals. Fuel, 150 (IF-3.406). pp. 96-101.

Chakravorty, N (1989) Magnetic Separation. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri.

Chakrovorty, N (1989) Mineralogy - Its Application in Mineral Benficiation. In: Third Short Term Refresher Course on Classificiation and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri.

Chalavadi, G and Das, Avimanyu (2015) Study of the mechanism of fine coal beneficiation in air table. Fuel, 154 . pp. 207-216.

Chalavadi, G and Singh, R (2019) Theoretical aspects of conceptual multi-property mineral separator. Separation Science and Technology, 54(18) (IF-1.354). pp. 3154-3163.

Chalavadi, G and Singh, R K (2020) Study of Dry Mineral Separation Behavior in Dry Density Separators. Transactions of the Indian Institute of Metals, 73(8) (IF-1.205). pp. 2125-2128.

Chandraprabha, M N and Natarajan, K A (2010) Biomodulation of mineral surfaces for selective separation of pyrite from chalcopyrite: a ftir study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chandrasekhar, S (2000) Chemical, Mineralogical and Morphological Characterisation of kaolinitic clays. In: UNSPECIFIED.

Chandrasekhar, S and Sarkar, B and Das, Avimanyu and Chattoraj, U S and Kumar, Vinod and Rao, K V and Bhattacharyya, K K (2007) Analysis of the washability characteristics of low-volatile Indian coking coal with crushing at different top sizes - a case study. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur.

Chandrasekhar, S and Vogt, V and Raghavan, P and Gock, E (2006) Possibility of Recoating of Impurities on Product Kaolin during Froth Flotation - HRTEM-EDS Study. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Chandrasekhar, Sathy and Ramaswamy, S (2006) Investigations on Selected Indian Kaolins for their Possible Value Addition. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Chandwani, H K and Vishwanathan, V and Goyal, R N and Prasad, P M (1997) Recovery of iron and metal values from red mud possibilities in Indian scenario. NML Technical Journal, 39 (3). pp. 117-128.

Chatterjea, A B (1973) On Some Fundamental Aspects of Operational Parameters of Direct Reduction in Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Chatterjea, A B and Goswami, J and Biswas, S K and Santokh, Singh R and Padan, J S and Ghosh, S R (1969) Smelting of iron ore with raw lumpy non-coking coals. NML Technical Journal, 11 (4). pp. 53-67.

Chatterjee, Amit (1973) On Some Aspects of Basic Oxygen Steel Making with Prereduced Pellets. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Chatterjee, Amit and Raj, Manish (2010) How the steel industry can get the best out of Indian coal. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), 1 (Section 6). pp. 411-418.

Chatterjee, Anjan K (2011) Enhancing the potential of industrial use of the Indian fly ashes through echano-chemical activation – prospects and problems. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chattopadhyay, A (1997) Characterisation of Apatite and secondary Phosphate Minerals in Sukulu Phosphatic Soil, Uganda. In: UNSPECIFIED.

Chattopadhyay, A (1997) Characterisation of apatite and secondary phosphate minerals in Sukulu phosphatic soil, Uganda. In: UNSPECIFIED.

Chattopadhyay, A and Banerjee, B and Maulik, S C (2000) Mineralogy and Geochemistry of Beldih apatite, Purulia district, West Bengal. Journal of Metallurgy and materials Science, 42 (4). pp. 203-213.

Chattopadhyay, U S and Gouri Charan, T and Kabiraj, S K and Haldar, D D (2010) Multi product beneficiation of non-coking coal from eastern coalfields—a case study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chaubey, A K and Mishra, B K and Mukhopadhyay, N K and Mukherjee, P S (2011) Effect of compact density and preheating temperature of the Al-Ti-C Preform on the fabrication of in-situ Mg–TiC composites. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chaudhuri, S P and Mishra, K K and Ramachandrarao, P (2000) Dry gas cleaning system for cupola : From concept to commissioning - A case study. In: UNSPECIFIED.

Chaudhuri, Sanjay and Singh, K M P and Sharma, K K and Haldar, D D (2010) Beneficiation of coking coal fines lying in washery lagoons by froth flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chauhan, Sandeep Kumar and Soni, P R (2011) Development of 2024 p/m aluminium alloy–SiCp nanocomposites via mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chawngte, Rimi Lalrinpuii and Khatri, Varsha (2010) Prospect of non/heat recovery coke oven plant in India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2007) Adsorption of Oleic Acid on Calcium Minerals. In: Mineral Processing Technology- 2007, 22-24 February 2007, Mumbai.

Chernykh, S I and Korshunov, V V (2000) Creation of Column Flotation Cells of Large Volume Chambers and their Industrial Applications. In: UNSPECIFIED.

Chintala, Rajesh and Rath, R K and Kumar, Anil (2017) Effective Utilization of Fly Ash, Iron Ore Slime and LD-Slag in Geopolymer Mortar. Recent Trends in Civil Engineering & Technology, 7(1) . pp. 9-16.

Chintala, Rajesh and Rath, R K and Kumar, Anil (2016) Recovery of Iron Values from Iron Ore Slimes using Reagents. Journal of Materials & Metallurgical Engineering, 6(3) . pp. 32-43.

Chirayath , A.T and Mohan, Jatinder and Gupta, T.k (1961) Investigation report of the bentonite sent by M/S machinery &equipment manufacturers private limited Ahmedabad. Other (TMP). CSIR NML.

Choudury, V N (1991) Complexometric Titration and its Application to Silicate Analysis. In: Workshop on Modern Methods of Chemical Analysis for Minerals and Metals, January 22-24, 1991, NML, Jamshedpur.

CSIR, (2010) CSIR Technofest - 2010: Theme 12: Mining, Minerals & Materials. In: CSIR Technofest - 2010, 14-27 November, 2010, New Delhi. (Unpublished)

Csőke, B and Mucsi, G and Sík, Cs (2011) Production and practical application of mechanically activated fly ash-based binding material. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Cui, Jirang and Forssberg, Eric (2006) Recycling of Consumer Electronic Scrap. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

D

Danaiah, B and Bandyopadhyay, A and Kudbi, G K and Rao, T C (1985) Improvement of Filter Capacity through process Analysis at Rakha concentrator of Hindustan Copper Limited. In: Proceedings of National Seminar on Mineral Processing and IX Annual Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur.

Dar, K K (1973) Lecture-The role of biogeochemical processes in concentration of elements in nature and in extraction of metals from their ores. NML Technical Journal, 15 (4). pp. 7-10.

Das, A (2009) Mineral Processing. In: A Continuing Education Course for Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur.

Das, Arpan (2016) Intervention of martensite variants on the spatial aspect of microvoids. Materials Research Express, 3(6) (IF-1.068).

Das, Avimanyu (2008) Introduction. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Das, Avimanyu and Bhattacharyya, K K (2010) An improved process for the beneficiation of fine coking coal from Munidih area. Steel Tech, 4 (July). pp. 29-33.

Das, Avimanyu and Dey, Shobhana and Maulik, S C and Bhattacharryya, K K and Konar, J (2006) Processing of Waste Printed Circuit Boards. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Das, Avimanyu and Roy, Subrata (2007) Comminution - Theory and Plant Practice. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Das, Avimanyu and Roy, Subrata (2007) Magnetic Separation - Principles and Application in Beneficiation of Iron Ores. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Das, Avimanyu and Sarkar, B and Biswas, P and Roy, Subrata (2009) Performance prediction of floatex density separator in processing iron ore fines – a relative velocity approach. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 118 (2). pp. 78-84.

Das, Avimanyu and Sarkar, B and Vidyadhar, A and Roy, Subrata (2010) Efficient Recovery of Combustibles From Coking Coal Fines. Mineral Processing and Extractive Metallurgy Review, 31 (4). pp. 236-249.

Das, Avimanyu and Sarkar, B and Vidyadhar, A and Singh, Alok K and Bhattacharyya, K K (2008) A Novel Beneficiation Scheme for A Medium Coking Coal Fines from India. International Journal of Coal Preparation and Utilization, 28 (4). pp. 189-200.

Das, Avimanyu and Singh, Ratnakar and Bhattacharyya, K K (2011) Split Processing of High Ash Indian Coking Coal Fines Using Jameson Flotation Cell. Mineral Processing and Extractive Metallurgy Review, 32(1) (0.611 (SCI)). pp. 17-23.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Classification. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Comminution. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) De-Watering. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Electrostatic Seperation. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Froth Flotation. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Gravity Concentration. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Importance of Mineralogy in Mineral Processing. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Magnetic Separation. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Material Balance, Plant Evaluation and Modeling. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Mineral Processing and Nonferrous Extractive Metallurgy. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy. National Metallurgical Laboratory, Jamshedpur, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Principles of Extractive Metallurgy. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Das, Avimanyu and Singh , Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Agglomeration. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Das, Avimanyu and Vidyadhar, A and Dey, S K (2009) Modeling of Fine Coal Processing in a Teeter Bed Separator. In: International Seminar on Mineral Processing Technology (MPT-2009) , October 28-30, 2009, IMMT, Bhubaneshwar.

Das, B and Reddy, P S R and Bhoumik, S K and Sengupta, D K and Ansari, M I (1985) Possibility of Recovering Iron Fines from Tailings by Hydrocyclone. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Das, Chitrangada and Mehta, K D and Pandey, B D (2005) Biochemical Leaching of Metals from Indian Ocean Nodules. In: International Seminar on Mineral Processing Technology - (MPT-2005), January 6-8, 2005, Indian School of Mines, Dhanbad.

Das, Chitrangada and Singh, N K and Mehta, K D and Pandey, B D (2004) Potential Application of a Heterotrophic Microorganism for Bioleaching of Metals from Indian Ocean Nodules. In: International Seminar on Mineral Processing Technology (MPT-2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa.

Das, Manash R and Sarma, Jyotirmoy and Sarma, Namrata and Mahiuddin, Sekh (2010) Characterization and ion specificity of the iron ore beneficiation waste. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Das, R P (2006) e-Waste: A Disaster or an Opportunity for India. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling -(MPT-2006), March 8-10, 2006, NML, Chennai.

Das, Sanjeev and Prasad, Ranjit and Singh, R P and Abhilash, (2017) Physical, Mechanical and Metallurgical Characteristics of Banded Hematite Jasper of Ghatkuri (Gua), Jharkhand. Journal of Geological Society of India, 90(5) (IF-0.479). pp. 623-627.

Das, Suchandan K (2011) Mathematical Modelling of Carbonisation Process in Stamp Charged Coke ovens. In: International Conference on Coal & Coke - 2011, April 7-8, 2011, Tata Steel, Jamshedpur, India.

Das, Suchandan K and Bhattacharyya, K K and Singh, Ratnakar (2011) Optimized Neural Network Model to Characterize the Effects of Process Parameters on the Separation Efficiency of Iron Ore by a High Intensity Magnetic Separator. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India.

Das, Suchandan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharyya, K K and Singh, Ratnakar and Mehrotra, S P (2007) Mathematical modelling of bagnold effect and separation behavior of a coal-washing spiral using a mechanistic approach. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur.

Das, Suchandan K and Kumari, Preeti and Bhattacharyya, K K and Singh, Ratnakar (2010) A mathematical model to characterize separation behavior of a spiral for processing iron ore using a mechanistic approach. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Das, Suchandan K and Kumari, Preeti and Bhattacharyya, K K and Singh, Ratnakar (2010) A multi-input multi-output artificial neural network model to predict the separation characteristics of iron ore by a magnetic separator. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Das, Swapan K and Kumar, S and Singh, K K and Shah, R G (1997) Some studies on olivine fines and clay mixtures. In: UNSPECIFIED.

Das, Swapan K and Mohanty, J K and Acharya, B S and Muralidhar, J and Rajeev, and Kanungo, S B and Sahoo, R K (1997) Physico-Chemical Characterisation of Lateritic Nickel Ores of Sukinda, Orissa. In: UNSPECIFIED.

Das Biswas, Rupa and Upadhyay, A K and Kumari, Rashmi and Mohanty, Ashok and Gupta, K K and Konar, J and Chakravarty, S (2010) Uncertainty of measurement for determination of major elements in iron ore using ICP-OES. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Das Gupta, S and Agrawal, J C and Roy, B (1973) Application of Solid Reductant Processes for Direct Reduction in India. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Dastur, M N and Parthasarathy, C R and Roy, T K (1973) The Future of Direct Reduction Processes. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Datta, Amlan and Mishra, B K (2006) Discrete Element Method (DEM) Analysis of Non-Cohesive Granular Material Flow in Hoppers. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Datta, S S and Srinivasan, T M and Grebenkin , G A and Bhagat , R P and Das, A and Aswath, H S and Banerjee, S (1984) Laboratory Investigation of the Optimum Regime for Sinter returns during Iron Ore Sintering. Steel India, 7(1) . pp. 32-38.

Dayal, R and Singh, Akhileshwar (1985) Search for Technology to Maximise Pyrite utility in Bihar. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Dayal, V and Pan, S K and Mukherjee, S K and Rai, S (2010) Commercial utilization of waste/low-grade iron ore fines in SAIL mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

De, T C (1985) Some Observations on the Beneficiation of Lean Phosphate rock from Indigenous Resources. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Devi, T Uma and Dwarapudi, Srinivas and Kumar, M G Sampath and Saralaya, D L and Gupta, S S (2006) Improvement and Optimization of Performance of Iron Ore Beneficiation Plant. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Dey, Shobhana (2012) Enhancement in hydrophobicity of low rank coal by surfactants - A critical overview. Fuel Processing Technology, 94 (1). pp. 151-158.

Dey, Shobhana (2005) Flotation responses of Gondwana coal in release analysis. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 114 (4). pp. 248-254.

Dey, Shobhana and Allison, S and Franzidis, J.-P and Yorath, G and Harris, P J and O'Connor, C T (2009) An investigation into the effect of combinations of various reagents and pH regimes on the flotation of pyrrhotite. In: Flotation ’09, 2009, Cape Town, South Africa.

Dey, Shobhana and B, Gangadhar and Gopalkrishna, S.J. (2015) Amenability to dry processing of high ash thermal coal using a pneumatic table. International Journal of Mining Science and Technology, 25 (IF-1.551). pp. 955-961.

Dey, Shobhana and Bhagat, R P and Kunwar, R K and Rao, D S and Banerje, B and Maulik, S C (2001) Comparative Studies on Beneficiation of Bauxite Samples for Application in Refractory Industry. Metals Materials and Processes, 13(1) . pp. 1-8.

Dey, Shobhana and Bhattacharya, S (1998) Comparative Performance Analysis of Frothers — A Review of Available Methodologies. Mineral Processing and Extractive Metallurgy Review: An International Journal, 18 (2). pp. 201-213.

Dey, Shobhana and Bhattacharya, S (2007) Effect of frother type in collectorless flotation of two high-rank coking coals of Gondwana origin. Coal Preparation, 27 (1-3). pp. 4-27.

Dey, Shobhana and Bhattacharya, Sumantra (2010) A new approach to performance optimization in coal flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Dey, Shobhana and Bhattacharyya, K K (1997) Response of mineral separator for fine coal beneficiation. In: National Seminar on Processing of Fines, 1997, NML Jamshedpur.

Dey, Shobhana and Chaurasia, Binish and Sahu, Laxikanta (2020) Dry processing of high ash Indian coal by air fluidized vibrating deck. International Journal of Coal Preparation and Utilization, online (IF-2.034). pp. 1-8.

Dey, Shobhana and Franzidis, J.-P and Harris, P J (2009) New approach for quantification of sulphydryl collector- mixture on sulphide mineral surface. In: International Seminar on Mineral Processing Technology (MPT-2009) , October 28-30, 2009, IMMT, Bhubaneshwar.

Dey, Shobhana and Mohanta, M K and Bhattacharyya, K K and Bhagat, R P and Rao, K V and Singh, Ratnakar and Das, Avimanyu and Mehta, K D and Alex, T C and Mohanty, Sunati and Singh, Ranjeet K (2011) Beneficiation and pelletisation of lateritic iron ore from Kahnwara, Katni. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Dey, Shobhana and Mohanta, M K and Goswami, M C and Pani, Santosh (2014) Recovery of Iron Values from Waste Manganiferous Iron Ore Fines for Pellet Making. Journal of Minerals and Materials Characterization and Engineering, 2 . pp. 513-521.

Dey, Shobhana and Mohanta, M K and Mohanty , Sunati and Goswami , M C and Bhattacharyya, K K (2011) Amenability to Processing of Maganiferous Iron Ore. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Dey, Shobhana and Pani, S (2012) Effective Processing of Low-Volatile Medium Coking Coal Fines of Indian Origin using Different Proces Variables of Flotation. International Journal of Coal Preparation and Utilization, 32(6) . pp. 253-263.

Dey, Shobhana and Pani, S and Das, Avimanyu (2012) Scanvenging of High-Value Product from High-Ash Medium Coking Coal: A Compulsion for Less Endowed Regions. International Journal of Coal Preparation and Utilization, 32(5) (0.289). pp. 238-251.

Dey, Shobhana and Pani, Santosh and Bhattacharyya, K K (2013) Effective processing of iron ore slime using column flotation. In: Flotation-13, 18-22 November 2013, Cape Town, South Africa.

Dey, Shobhana and Pani, Santosh and Das, Avimanyu (2012) Split flotation of LVMC coal to generate multiple products for complete utilization. In: International Mineral Processing Congress,2012, 24-28 Sept 2012, New Delhi.

Dey, Shobhana and Pani, Santosh and Mohanta, M K and Singh, Ratnakar (2012) Utilization of Iron Ore Slimes: A Future Prospective. Separation Science and Technology, 47 (5). pp. 769-776.

Dey, Shobhana and Pani, Santosh and Sharma, Mamta and Das, Avimanyu (2011) Advanced Coal Cleaning Technology for Challenges in Near future. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Dey, Shobhana and Pani, Santosh and Singh, Ratnakar (2014) Study of interactions of frother blends and its effect on coal flotation. Powder Technology, 260 (IF-2.269). pp. 78-83.

Dey, Shobhana and Pani, Santosh and Singh, Ratnakar and Paul, Gyan Manjari (2015) Response of process parameters for processing of iron ore slime using column flotation. International Journal of Mineral Processing, 140 (IF-1.310). pp. 58-65.

Dey, Shobhana and Parolis, L A S and Yorath, G (2012) Quantification of Sulphydryl Collector-Mixture Used in Sulphide Ore Flotation. Transaction of the Indian Institute of Metals, 65 (4). pp. 387-392.

Dey, Shobhana and Paul, Gyan Manjari and Pani, Santosh (2013) Effective flotation of weathered coal using frother blend. In: National Seminar On Coal Preparation Technology,CPT-2013 , 22-23 Feburary 2013, CIMFR, Dhanbad.

Dey, Shobhana and Sahu, L and Chaurasia, Binish and Nayak, B (2020) Prospects of utilization of waste dumped low-grade limestone for iron making: A case study. International Journal of Mining Science and Technology, 30(3) (IF-3.903). pp. 367-372.

Dey, Sujit Kumar and Dey, Shobhana and Das, Avimanyu (2013) Comminution features in an impact hammer mill. Powder Technology, 235 (IF-2.265). pp. 914-920.

Dey, Sujit Kumar and Vidyadhar, A and Das, Avimanyu (2012) Processing of electronic waste in a counter current teeter-bed separator. Journal of Environmental Management, 107 (IF-3.188). pp. 45-51.

Dey, Sujit Kumar and Vidyadhar, A and Das, Avimanyu (2010) Study of progeny particle size distribution in an impact hammer mill. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Dey, U K and Mishra, S C and Dutta, S K and Tiwary, S K (1997) Efficient use of Magnetite in Coal Beneficiation Plants for Heavy Media Separation - A case study. In: UNSPECIFIED.

Dhal, B and Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2010) Bio-processing for metal extraction, recycling and effluent treatment- an overview. In: International Conference on Non-ferrous Metals 2010, 10-11th Aug 2010, Varanasi.

Dhal, B and Abhilash, and Pandey, B D (2013) Process optimization for bio-beneficiation of a chromite concentrate by a Cr(VI) reducing native microbe (Bacillus sp.). International Journal of Mineral Processing, 123 (IF-1.378). pp. 129-136.

Dhal, B and Das, N N and Pandey, B D and Thatoi, Hruayanath (2011) Environmental Quality of the Boula-Nuasahi Chromite Mine Area in India. Mine Water and the Environment, 30 (3). pp. 191-196.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2012) Bacterial Reduction of Hexavalent Chromium from Contaminated Overburden Soil. International Journal of Metallurgical Engineering, 1(5) . pp. 83-87.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2013) Characterizing toxic Cr(VI) contamination in chromite mine overburden dump and its bacterial remediation. Journal of Hazardous Materials, 260 (IF-4.173). pp. 141-149.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2010) Kinetic aspects of Cr(VI) bioremediation of water and soil contaminated from chromite mine overburden dumps. In: XI International Seminar on Mineral Processing Technology (MPT-2010), 15-17th Dec. 2010, NML Jamshedpur.

Dhal, B and Mehta, K D and Das, N N and Thatoi, Hruayanath and Pandey, B D (2011) Native fungal isolates for biosorption of Cr(VI): A potential approach for treatment of chromite mine drainage. In: Proceedings of National Seminar on Environmental Management in Metallurgical Industries (EMMI-2010). Allied Publishers Pvt. LtD, BHU Var, pp. 67-71. ISBN 978-81-8424-728-2

Dhal, B and Pandey, B D and Abhilash, (2018) Mechanism elucidation and adsorbent characterization for removal of Cr(VI) by native fungal adsorbent. Sustainable Environment Research . (In Press)

Dhal, B and Thatoi, Hruayanath and Das, N N and Pandey, B D (2013) Chemical and microbial remediation of hexavalent chromium from contaminated soil and mining/metallurgical solid waste: A review. Journal of Hazardous Materials, 250-251 (IF-4.173). pp. 272-291.

Dhal, B and Thatoi, Hruayanath and Das, N N and Pandey, B D (2010) Reduction of hexavalent chromium by Bacillus sp. isolated from chromite mine soils and characterization of reduced product. Journal of Chemical Technology & Biotechnology, 85 (11). pp. 1471-1479.

Dhar, S K and Mathur, G P and Narayanan, P I A (1965) Investigation on the Generation of fines from Kiriburu Iron during Transport and Handling. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Didolkar, V K and Kumar, V A and Pathak, S U and Tupkary, R H (1997) Beneficiation of low grade graphite ore from Multai area, Betul district, M.P. In: UNSPECIFIED.

Director, Deputy (1973) Vote of Thanks. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR- National Metallurgical Laboratory, Jamshedpur.

Director, NML (2014) Annual Report 2013-2014. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2015) Annual Report 2014-2015. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2016) Annual Report 2015-2016. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2017) Annual Report 2016-2017. CSIR- National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2018) Annual Report 2017-2018. CSIR- National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (1960) Basic Characteristics. Foundry Moulding sands of India . pp. 12-15.

Director, NML (1960) Bonding Clays. Foundry Moulding Sands . pp. 144-170.

Director, NML (1960) Crude Silica Sands. Foundry Moulding Sands of India, ( ). pp. 71-94.

Director, NML (2012) CSIR-NML Exhibition Materials. [Show/Exhibition]

Director, NML (2017) Director's Desk - 70th RC Meeting of CSIR-NML (English Version). CSIR- National Metallurgical Laboratory, Jamshedpur.

Director, NML (1960) High Silica Sands. Foundry Moulding Sands of India . pp. 96-137.

Director, NML (1960) Introduction. Foundry Moulding Sands of India, ( ). pp. 1-2.

Director, NML (2011) la vintage metallurgie : 60 years of marriage of science to industry. In: la vintage metallurgie. National Metallurgical Laboratory, Jamshedpur, pp. 1-416.

Director, NML (1998) List of NML Technical reports. National Metallurgical Laboratory, Jamshedpur.

Director, NML (1960) Methods of Testing. Foundry Moulding Sands of India, ( ). pp. 16-23.

Director, NML (1960) Natural Moulding Sands. Foundry Moulding Sands of India . pp. 24-70.

Director, NML (2010) NML Diamond Jubilee Souvenir. In: NML Diamond Jubilee Souvenir. National Metallurgy Laboratory, Jamshedpur.

Director, NML (2010) NML Technology Handbook. National Metallurgical Laboratory, Jamshedpur.

Director, NML (1960) Occurance. Foundry Moulding Sands of India . pp. 3-11.

Director, NML (2013) Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar. In: Exploitation of Lean Grade Ore, Ore Fines and. www.nmlindia.org, pp. 1-287.

Director, NML (1968) Processes developed at the National Metallurgical Laboratory for Commercial Exploitation. National Metallurgical Laboratory, Jamshedpur.

Director, NML (1960) Special Sands. Foundry Moulding Sands of India . pp. 138-143.

Director, NML (1960) Summary and Recommendations. Foundry Moulding Sands . pp. 171-180.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, Sanjay (2016) Mechanical activation of volcanic ash for geopolymer synthesis: effect on reaction kinetics, gel characteristics, physical and mechanical properties. RSC Advances, 6(45) (IF 3.169). pp. 39106-39117.

Dodbiba, G and Dai, D and Okaya, K and Matsuo, S and Fujita, T (2010) Treatment of arsenic-containing acid mine drainage by micro-bubble flotation. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), 2(Section 14) . pp. 1175-1180.

Dutta, Madhulika and Khare, Puja and Chakravarty, S and Saikia, Durlov and Saikia, Binoy K (2018) Physico-chemical and elemental investigation of aqueous leaching of high sulfur coal and mine overburden from Ledo coalfield of Northeast India. International Journal of Coal Science & Technology . pp. 1-17.

Dwarapudi, Srinivas and Devi, T Uma and Kumar, M G Sampath and Saralaya, D L and Gupta, S S (2006) Development of Beneficiation Process for High Alumina Iron Ores of Bellary-Hospet Region. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Dwari, R K and Rao, K Hanumantha (2006) High Ash Non Coking Coal preparation by Tribo-Electrostatic Technique. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Dwivedi, A D and Gupta, D K (2006) Calcined Phosphate Fertilizer from Jhamarkotra Secondary Phosphate Ore and Rock Phosphate Beneficiation Plant Bulk Circuit Tail. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Dwivedi, A D and Santharam, J (2006) Utilization of Nano Technology in Reducing Moisture Content of Phosphate Cake at RSMML Rock Phosphate Beneficiation Plant. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Dwivedy, K K and Bhurat, M C and Jayaram, K M V (1972) Heap and bacterial leaching tests on sample of low grade Uranium ore from Keruadungri, Singhbhum District, Bihar. NML Technical Journal, 14 (2). pp. 72-75.

E

Eastier, J (1985) International Mineral Processing and Comminution. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

EI-Shall, H and Midnay, A E and Svoronos, S and Stana, R and Moudgil, B (2006) One More Solution to Dolomite/Apatite Separation Problem. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Engineer, B B (1973) Iron Ore Pre-Reduction. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Eslamian, Atiye and Rezai, Bahram and Mohammad, Reza Aslani (2010) Study and prediction of a relationship between particles shape characteristics of minerals and their flotation kinetics. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 43-46.

Ezz, S Y (1973) Possibilities of Production and use of Sponge Iron in the Arab Countries. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Ezzati, M Ghayoor and Rezai, B (2006) The Characterization and Classification Studies of Bent-onite Mines in IRAN for Application in Drilling and Foundry by AHP Technique. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

F

Fabián, Martin and Baláž, Peter and Briančin, Jaroslav (2011) Study of the silver ions cementation after mechanical activation of cementator. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Foct, Jacques (2011) Specifics of mechanically driven atomic distributions In interstitial alloys. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Forsling, Willis (2006) Surface Properties of Aqueous Fluorapatite and Maghemite with Reference to the Dephosphorization of Magnetite. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Frias, C and Raychaudhuri, A and Palma, J and Diaz, G (2002) Development of New-Concept Clean Technologies to Extract Metals from Primary and Secondary Sources. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Fuerstenau, Douglas W (2006) Processing Challenges for Sustainability in Energy, Environment and Materials. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

G

Gaur, R K and Sharma, N K and Sharma, V R (1997) Receding the entrainment of concomitant Ultrafines by MGS in Lead Concentrate of Rajpura - Dariba Concentrator. In: UNSPECIFIED.

Gazder, Azdiar A and Florian, H Dalla Torre and Christopher, H J Davies and Pereloma, Elena V (2011) The microstructure, texture and mechanical properties of AS-ECAE Interstitial-free steel and copper. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghorai, S and Mandal, G K and Roy, S and Minj, R K and Agarwal, Anup and Singh, D P and Kumar, A and Ramna, R B V (2017) Treatment of LF slag to prevent powdering during cooling. Journal of Mining and Metallurgy Section B- Metallurgy , 53(2)B (IF-0.804). pp. 123-130.

Ghorai, Tanmay K and Pramanik, Panchanan (2011) Mechanochemical synthesis, characterization and photocatalytic Properties of M2O3/TiO2 (M = Fe, Mn) nano-composite under visible light. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghosh, Anirban and Abhilash, and Pandey, B D (2015) A study on organo-sulfur tolerant bacterial strains from extremophilic coal mine environment- isolation and growth factors. Indian Journal of Geo-Marine Sciences, 44(3) (IF-0.616). (In Press)

Ghosh, Anirban and Kumari, Sujata and Abhilash, and Pandey, B D (2015) Microbial Biodesulphurisation of Coal. In: Microbiology for Minerals, Metals, Materials and the Environment. Taylor and Francis- CRC press, Philadelphia, US, pp. 153-184. ISBN 9781482257298

Ghosh, Anirban and Kumari, Sujata and Abhilash, and Pandey, B D (2013) Microbial upgradation of Meghalaya coal by Rhodococcus rhodochrous and Pseudomonas aeruginosa. In: Proceedings of XIII international seminar on Mineral Processing Technology, 10-12, December 2013, Bhubaneswar.

CSIR-NML (2012) A non-invasive process for sorting of alumina rich iron ores. 0060NF2012.

Ghosh, Arpita and Das, T K and Nayak, B and Palit Sagar, S (2013) A non-invasive technique for sorting of alumina-rich iron ores. Minerals Engineering, 45(55–58) (IF-1.207). pp. 55-58.

Ghosh, Arpita and Palit Sagar, S and Das, T K and Nayak, B (2012) Development of advanced sensor-based technique for iron-ore beneficiation. Exploratory (OLP). CSIR- National Metallurgical Lab, Jamshedpur. (Submitted)

Ghosh, Arpita and Sharma, A K and Nayak, B and Ghosh, T K and Palit Sagar, S (2013) Infrared Thermography for Iron Ore Grading. In: Physical Separation'13, 20-21st June, 2013, Falmouth, Cornwall, UK.

Ghosh, Arpita and Sharma, Arun Kumar and Nayak, B and Palit Sagar, S (2014) Infrared thermography: An approach for iron ore gradation. Minerals Engineering, 62 (IF-1.714). pp. 85-90.

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V and Das, S K and Ray, Ajoy K (2011) Evaluation of interface microstructure for friction stir welded aluminium-stainless steel plate. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghosh, N K and Parthasarathy, L (2002) Atmospheric Pollution Control in Coke Ovens. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Ghosh, P (1988) Silica in boiler water. Anti-Corrosion Methods and Materials, 35 (10). pp. 8-14.

Ghosh, S and Dash, R R and Rao, G N (1980) The silica soda ratios of sodium silicate: Its foundry importance. NML Technical Journal, 22 (3-4). pp. 31-34.

Gilman, Steven K (2006) India's Mineral Sands Industry - A Global Perspective. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Goenka, Ashish and Bhunia, Kamalendu and Shukla, Satish Chandra and Kundu, Gautam (2010) Effect of particle shape on settling characteristics. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Gokarn, A N and Ravetkar, D D and Kulkarni, S S (1997) Waste Reduction at the Source and Waste Recycle through Briquetting of the Reduction Charge in the black- ash process. In: UNSPECIFIED.

Gorai, Bipra and Jana, R K and Premchand, (2002) Reduction of Emission from Aluminium Industries and Cleaner Technology. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Gorain, B K (2006) Design and Optimisation of Flotation Circuits with Large Cells. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Goswami, Linee and Khare, Puja and Baruah, B P (2010) Emission of fine particulates and SO2 during coke making—a pilot plant study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Goswami, M C (1999) On the strength and reduction characteristics of fluxed composite iron ore pellets. NML Technical Journal, 40 (4). pp. 163-170.

Goswami, M C (2007) Physical and Physico - Chemical Characterization of Iron Ore Agglomerates. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Goswami, M C and Mahapatra, A K S and Prakash, S (1997) Briquetting of waste coke fines for industrial utilization. NML Technical Journal, 39 (1). pp. 31-38.

Gouri Charan, T and Haldar, D D and Nagnoor, P C (2010) Studies on the cleaning potentialties of IB valley coal by washability investigations. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Goyal, Anshul and Roy, Papiya and Banerjee, P K (2010) Effect of air core on flow rate and split in a hydrocyclone. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Grebenkin, G A and Datta, S S and Bhagat, R P and Chatterjee, B K (1984) Preheating of Sinter Mix. In: Proceedings of all India Seminar on Extraction of Iron , Feb. 1984, RDCIS, Bhilai.

Grosdidier, T and Ji, G and Llorca, N (2011) On the processing of dense hetero-nanostructured metallic materials for improved strength / ductility balance by ecae and sps methods. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, CSIR-NML, Jamshedpur.

Gupta, Ashiwanit Kumar and Banerjee, P K and Mishra, Arun and Satish, P and Pradip, (2006) Frother Characterization with Two-Phase Foam System. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Gupta, K N (1991) Inductively Coupled Plasma Spectrometry. In: Workshop on Modern Methods of Chemical Analysis for Minerals and Metals, January 22-24, 1991, NML, Jamshedpur.

Gupta, K N and Chatterjea, A B (1968) Distribution characteristics of burden in low shaft furnace. NML Technical Journal, 10 (2). pp. 7-14.

Gupta, P C (1985) Processing of Indian Iron Ores. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of India Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Gupta, Ramendra (2010) Challenges and opportunities in uranium processing industry in India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Gupta, S K and Tandon, J K and Ghorai, D N and Pal, P K and Sarkar, P K (2002) Transforming Steel Domain Green through Innovative Waste Management - A Jindal Approach. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Gurevich, Y L and Teremova, M I and Bondarenko, G N and Kislan, S L and Abhilash, (2015) Bio-chemical leaching of kaolinite-hematite-boehmite type bauxite ore. Indian Journal of Chemical Technology, 22/5 (IF-0.655). pp. 248-252.

Gurevich , B I and Kalinkin, A M and Kalinkina, E V and Kalinnikov, V T (2011) Utilization of ferrous-magnesium slag for production of binding materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Guria, Chandan and Verma, Mohan and Mehrotra, S P and Gupta, Santosh K (2005) Multi-objective optimal synthesis and design of froth flotation circuits for mineral Processing, using the jumping gene adaptation of genetic algorithm. Industrial & Engineering Chemistry Research, 44 (8). pp. 2621-2633.

Gurulaxmi, S N and Ghosh, T K and Mukherjee, A K (2010) State of art characterization study of banded hematite jasper for the purpose of beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

H

Hadjiev, A and Hadjiev, P and Georgiev, R (2000) Flotation of Barite From Complex Iron Ore. In: UNSPECIFIED.

Hait, Jhumki and Jana, R K and Sanyal, S K (2004) Mineralogical characteristics of copper electrorefining anode slime and its leached residues. Industrial & Engineering Chemistry Research, 43 (9). pp. 2079-2087.

Hait, Jhumki and Jana, R K and Sanyal, S K (2009) Processing of copper electrorefining anode slime: a review. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 118 (4). pp. 240-252.

Haldar, D D (2010) Beneficiation of non-coking coals: basic concepts and technology routes. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Hangovan, S and Rajanna, M and Nath, K P and Goud, S L Mahesh (1985) Crushing and Grinding Practice at Ingaldhal Copper mines. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Harbort, G and Alexander, D (2006) Gas Dispersion Measurements in Coal Flotation Cells. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Hargave, R V and Dasgupta, S P and Rao, M R K (1976) Blast furnace slags-A study of chemical and mineralogical composition and utilization in cement industry. NML Technical Journal, 18 (2). pp. 15-20.

Haugen, B E and De Silva, S R and Datta, B K (2000) A de-dusting device for removing fines from pellets, granules and coarser powders. In: UNSPECIFIED.

Haxhiaj, A and Haxhiaj, E (2010) The optimization of the quantity of coke and agglomerate in lead production in 'Water-jacket' furnace. Journal of Metallurgy and Materials Science, 52 (3). pp. 257-265.

Hazra, B and Varma, Atul K and Bandyopadhyay, A K and Chakravarty, S and Buragohain, J and Samad, S K and Prasad, A K (2016) FTIR, XRF, XRD and SEM characteristics of Permian shales, India. Journal of Natural Gas Science and Engineering, 32 (IF-2.718). pp. 239-255.

Holmes, Ralph J (2010) CSIRO carbon steel raw materials research. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Hore, S and Das, Suchandan K and Bhattacharyya, K K and Singh, Ratnakar (2011) Data-Based Performance Modelling of Hydrocyclone for Processing Iron Ore Fines. In: International Seminar on Mineral Processing Technology (MPT-2011), Oct 20, 2011, Udaipur, India.

Hore, S and Das, Suchandan K and Godiwalla, K M and Bhattacharyya, K K and Singh, Ratnakar (2007) Modelling performance of water-only cyclone as a gravity separator for fine coal cleaning. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur.

Hore, S and Das, Suchandan K and Godiwalla, K M and Bhattacharyya, K K and Singh, Ratnakar (2008) Performance characterization of water-only Cyclone for processing high ash Indian coal. Metals Materials and Processes, 20 (4). pp. 265-280.

Hore, S and Das, Suchandan K and Singh, Ratnakar and Bhattacharyya, K K (2012) Efficiency Study of a Water-Only Cyclone by Experimental and Data Modeling Techniques when Cleaning Indian Coal Fines. International Journal of Coal Preparation and Utilization, 32 (4). pp. 193-209.

Hung, Nguyen Trong and Thuan, Le Ba and Thanh, Tran Chi and Watanabe, Masayuki and Khoai, Do Van and Thuy, Nguyen Thanh and Nhuan, Hoang and Minh, Pham Quang and Mai, Tran Hoang and Tung , Nguyen Van and Tra, Doan Thi Thu and Jha, Manis K and Lee, Jin-Young and Kumar, J Rajesh (2020) Separation of thorium and uranium from xenotime leach solutions by solvent extraction using primary and tertiary amines. Hydrometallurgy, 198 (IF-3.338). 105506 .

Hussain, Zuhailawati and Yusoff, Mahani (2011) In-situ formation of NbC in mechanically alloyed Cu-Nb-C At different temperatures. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

I

Ismail, A K (2010) Energy saving during alum production from kaolin with coproduction of alumina-silica composites from process silica wastes. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

J

Jaehyun, O H (2006) Current Status for Resources Recycling in Korea. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Jafri, M W and Rath, R K and Dey, Shobhana and Sharma, Mamta and Singh, Ratnakar (2017) Studies on ash reduction of a non-coking coal sample by froth flotation. In: International Conference on Mineral Processing Technology (MPT-2017), 2017, Mahabalipuram, Chennai.

Jain, P C (1985) Welcome address. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR), Jamshedpur.

Jakhu, M R (1998) Process Control in Flotation Plants. In: Workshop on Froth Flotation:Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Jameson, Graeme J (2006) Theory and Applications of the Jameson Cell. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Jana, R K and Singh, D D N and Roy, S K (1997) Some physico-chemical characteristics of central Indian Ocean nodules and their effects on extractive metallurgical schemes. NML Technical Journal, 39 (2). pp. 93-103.

Jarlbring, Mathias and Sandstrom, Dan E and Antzutkin, Oleg N and Holmegren, Allan and Forsling, Willis (2006) The Surface Properties of Aqueous Fluorapatite & Maghemite with Reference to the Dephorization of Magnetite. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Jena, P S M and Rai, R K and Sahu, J K (2018) Improvement of toughness of high chromium white cast iron: duplex ferritic-austenitic matrix. Journal Materials Science and Technology, 34(4) (IF-5.040). pp. 299-304.

Jha, G S and Chattopadhyay, P C and Prasad, P S and Mitra, A N and Maji, S C and Gouri Charan, T and Haldar, D D (2010) Washability studies and characterization of cleans of coking coal sample from BCCL, CIL, India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Jha, Gaurav and Soren, S and Mehta, K D (2020) Life cycle assessment of sintering process for carbon footprint and cost reduction: A comparative study for coke and biomass-derived sintering process. Journal of Cleaner Production, 259 (IF-7.246). pp. 120899-1.

Jha, Gaurav and Soren, S and Mehta, K D (2020) Partial substitution of coke breeze with biomass and charcoal in metallurgical sintering. Fuel, 278 (IF-5.578). p. 118350.

Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Review on solvent extraction of cadmium from various solutions. Hydrometallurgy, 111-112 (IF-2.027). pp. 1-9.

Jha, Manis K and Kumari, Archana and Panda, Rekha and Parween, R and Chakravarty, S and Kumar, J Rajesh (2020) Coal Burn Ash: A Sustainable Future Resource for Critical Metals Production. In: Clean Coal Technologies. Springer, Nature.

Joseph, P F and Prasad, V G K and Janarthanan, A J and Bhaktadarsan, K S (2010) Enhanced zircon recovery through centrifugal jigging. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Joseph, P F and Prasad, V G K and Janarthanan, A J and Chandrasekar, V (2010) Environmental management in beach sand mining and processing—a role model. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Joseph, P F and Prasad, V G K and Janarthanan, A J and Viswanath, R V (2010) Wet high intensity magnetic separation: efforts taken to adapt the machine to the mineral separation plant of IREL, chavara. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Joshi, I K and Menaria, K L and Mathur, N K (1985) Cationic Guar Gum as a depressor for a Gangue in froth flotation of Pyritic-zinc ore from Rajpura Dariba Mines, Udaipur, India. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR), Jamshedpur.

Jyolsna, Jerin and Rath, R K and Kumar, Anil (2016) Partial Replacement of Sand and Cement by Iron Ore Slime for Concrete Building Material. Recent Trends in Civil Engineering & Technology, 6(2) . pp. 37-42.

Jyolsna, Jerin and Rath, R K and Kumar, Anil (2016) Recovery of Iron Values from Waste Iron Ore Slime. Journal of Materials & Metallurgical Engineering, 6(3) . pp. 1-7.

Jyoti, Divya and Rath, R K and Mohanty, Sunati and Singh, Ratnakar and Bhattacharyya, K K (2010) Beneficiation of a finely disseminated low-grade iron ore by froth flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

K

Kalinkin, A K (2011) Mechanosorption of Co2 by silicates: mechanism, kinetics and possible applications. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kalinkin, A M and Kumar, Sanjay and Gurevich , B I and Alex, T C and Kalinkina, E V and Tyukavkina, W and Kalinnokov, V T and Kumar, Rakesh (2012) Geopolymerization behavior of Cu-Ni slag mechanically activated in air and in CO2 atmosphere. International Journal of Mineral Processing, 112 . pp. 101-106.

Kalinnikov, V T and Krasheninnikov, O N and Belogurova, T P (2011) Mining waste utilization in the production of building materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kaloshkin, S D and Ergin, K S and Tcherdyntsev, V V and Maksimkin, A V and Petrzhik, M I and Antipov, E M and Gerasin, V A (2011) Structure and propertties of ball milled utrahigh-molecular weight Polyethylene - clay composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kaloshkina, Sergey and Romankov, Sergey and Komarov, Sergey and Kaevitser, Ekaterina (2011) Intermetallic coatings produced by mechanical alloying method. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kalyani, V K and Pallavika, and Chaudhuri, Sanjay and Haldar, D D (2006) Performance Optimization of Froth Flotation Process using Response Surface Methodology. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Kamaraj, A and Mandal, G K and Minj, R K and Misra, S and Bandyopadhyay, D (2017) Characterization and Evolution of Non-metallic Inclusions in Fe–Al–Si–O System. Transactions of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1887-1899.

Kamaraj, Ashok and Meshram, Rohit B (2021) A comparative study on environmental impact analysis of synthetic and ESR flux used for refining of steel. 28th CIRP Conference on Life Cycle Engineering .

Kaminskii, Yu D and Lyakhov, N Z (2006) Efficiency of Grinding and Mechanical Activation of Solids in Planetary Ball Mills. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Kamiya, Kohji and Ohba, Akira and Gunji, Koki (1973) Desulphurization of Coke-Mixed Iron Ore Pellets. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Kar, A K and Rath, R K and Mohanta, M K and Singh, Ratnakar and Kumar, Anil (2010) Characterisation and surface chemical studies on ultrafine iron ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kari, Chandrakala and Kapure, Gajanan and Rao, S Mohan (2006) Effect of Operating Parameters on the Performance of Spiral Concentrator. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Katti, A and Mishra, B K and Mehrotra, S P (1997) Simulation of industrial gravity separation processes using a general purpose simulator. In: UNSPECIFIED.

Kaura, Kuldip (2006) Vedanta:Journey Towards Mettle for Metal. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Kawatra, S K (2006) Dust in Mineral Processing. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Keekan, Kishore and Jalondharaa, J Chhaganbhai and Abhilash, (2017) Extraction of Ce and Th from Monazite Using REE Tolerant Aspergillus niger. Mineral Processing and Extractive Metallurgy Review, 38(5) (IF-1.219). pp. 312-320.

Kenzhaliev, B K and Abdykirova, G Zh. and Zhapbasbaev, U K and Beisembaeva, G Zh. and Suleimenov, E N (2010) Development of new modifying reagent- assisted technology for rebellious gold-bearing ores processing. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kenzhaliev, B K and Berkinbayeva, A N and Khodaryova, T A (2010) Effects of microorganisms and their metabolites on nonferrous and precious metal ores leaching. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kenzhaliev, B K and Lozhnikov, S S and Chanturiya, V A and Zhapbasbaev, U K and Suleimenov, E N (2010) Development of combined technology for rebellious metamorphized polymetallic ores. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kenzhaliev, B K and Yarmukhamedov, E K and Akhmetova, K. Sh. and Ponomaryova, E I and Atanova, K. Sh. (2010) Extraction of gold from heap cyanic solutions of polymetallic ores by polycondensational anionites. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Ketegenov, T and Urakaev, F (2011) Influence of thickness of coated layer on parameters and kinetics of mechanical activation (example of quartz processing). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Khairy, E M and Kamal, M. Hussein and El-Tawil, S Z (1966) Pre-oxidation of ilmenite ores and its bearing on their solid-state reduction by hydrogen. NML Technical Journal, 8 (2). pp. 10-14.

Khare, Puja and Sahu, O P and Baruah, B P (2010) Chemometric analysis: a tool to predict the release behaviour of hazardous trace elements (HTEs) during coal mining and utilization. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kholkin, A I and Pashkov, G L and Samoylov, V G and Fleitlikh, IYU and Kuzmin, V I and Sergeev, V V and Kopanev, A M and Belova, V V (2006) Development of Hydrometallurgical Process of Non-Ferrous and Rare Metals Recovery from Untraditional Mineral Raw Materials and Natural Brines. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Khosla, N K and Bhagat, R P and Gandhi, K S and Biswas, A K (1984) Calorimetric and Other Interaction Studies on Mineral-Starch Adsorption Systems. Colloids and Surfaces . pp. 321-336.

Kim, Joon-Soo and Lee, Jin-Young and Kumar, J Rajesh and Yoon, Ho-Soon (2010) Leaching methodologies for uranium. Journal of Metallurgy and Materials Science, 52 (1). pp. 1-17.

Kim, W T and Shin, H Y and Lee, Jae-chun and Jeon, H S and Chang, S W and Choi, H S (2006) Recovery of Heavy Minerals from Korean Beach Sand. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Kohad , V P (1998) Flotation of Sulphide Ores - HZL Experience. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Konar, J and Gupta , K K (2007) Analysis of Iron Ores. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Konig, Horst (1973) Reduction of Iron Ores using Non-Coking Coal as the Reduction Agent. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Konnur, Rahul and Kumar, M Praveen and Raha, Sasanka (2006) Modeling and Simulation of Dewatering of Particulate Suspensions by Batch Pressure Filtration. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Konstanchuk, I and Gerasimov, K and Bobet, J -L (2011) Mechanically alloyed magnesium-based materials For hydrogen storage. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kopparthi, Prasad and Gupta, Ashiwanit Kumar and Banerjee, P K (2010) The effect of softening recycled water on coal flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kosenko, N and Vinogradova, L and Filatova, N and Smirnova, M (2011) The mechanical treatment as a method of Inorganic substances passive. In: International Conference on Mechanochemistry and Mechanical Alloying, 1-4 December 2008, CSIR-NML, Jamshedpur.

Koshta, R N and Agarwala, K C and Subrahmanyam, N and Rao, J J (1985) Studies on the Geology and Beneficiation of Chandak Magne-site Deposit from Pithoragarh District, Uttar Pradesh. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Krishna, Ch. Hari and Rao, P Srinivasa and Singh, P V Gopal (2006) Studies on the Performance of Air Cyclone Separator for Removal of Particulate Matter. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Kulikova, M P and Kaminskii, Yu D (2011) Influence of mechanical activation on alkylation and extractability of coal. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, A and Rao, A S and Dey, Shobhana (2021) Conservation of Resources by Processing of Waste Dumped Iron Ore Fines. Journal of Metallurgy and Materials Science, 63 (3-4) . pp. 55-69. (Unpublished)

Kumar, A and Sen, K (2000) Design and Construction Aspects of Mini Coal Flotation Plant. In: UNSPECIFIED.

Kumar, Abhishek and Chalavadi, G and Hembram, Khelaram and Tripathy, S (2019) Study of dry coal beneficiation in an Air pulsated Stratifier. In: XIX International Coal Preparation Congress 2019, 2019, New Delhi.

Kumar, Aman (2010) Increasing crushing circuit efficiency. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Ashish and Kamath, Bala P and Ramarao, V V and Mohanty, D B (2006) Micorwave Energy Aided Mineral Comminution. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Kumar, C Raghu and Daniel, Franklin and Murty, V S and Kumar, S Suresh (2006) Effect of Process Variables on High-Tension Separation - A Statistical Approach. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Kumar, C Raghu and Singh, Rakesh Ranjan and Venugopalan, O K and Murty, V S and Kumar, S Suresh (2006) Effect of Teetering Pulp Density in Floatex Density Separator - A Case Study. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Kumar, G (2000) Geochemical Behaviour of Ferromanganese Nodules from the Central Indian Ocean Basin. In: UNSPECIFIED.

Kumar, G and Singh, S K and Sinha, B K and Prasad, Bikas (2010) Ground water recharge potential of the tasra block of chasnala—a case study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Kamlesh and Rao, C Kesava (2006) Silica based Product Identified for Production from Kimberlite Tailing. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Kumar, Manoj and Kumar, Vinay (2008) Separation Processes-Solvent Extraction/ion Exchange for Metalions. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Kumar, Manoj and Sau, D C and Nishant, P and Bhattacharya, Maitreyee (2013) Reduction of ammonium paratungstate generated during hydrometallurgical processing of tungsten-copper borings. Harnessing of Nonferrous Minerals and Wastes, 828 . pp. 123-134.

Kumar, Manoj and Sau, D C and Nishant, P and Bhattacharya, Maitreyee (2013) Reduction of Ammonium Paratungstate Generated During Hydrometallurgical Processing of Copper-Tungsten(W-Cu) Borings. In: 17 th International Conference on Non-ferrous Minerals and Metals 2013, 5-6 July, 2013, Ranchi.

Kumar, Naresh and Venugopal, R and Soren, S and Chakravarty, S (2020) Thermodynamic Modelling of Effect of Flux on the Liquidus Temperatures and Phase transitions in Coal Ash. Journal of the Geological Society of India, 96(1) (IF-0.899). pp. 87-90.

Kumar, Pawan and Sah, Rakesh and Vidyadhar, A and Das, Avimanyu (2010) Dry beneficiation of coal fines using air table. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Rajendra (1985) Vote of Thanks. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Kumar, Rakesh and Alex, T C and Jha, Manis K and Khan, Z H and Mahaptra, S P and Mishra, C R (2004) Mechanochemistry and the Bayer process of alumina production. In: LIGHT METALS 2004. TMS (The Minerals, Metals and Materials Society), pp. 31-34. ISBN 978-0-470-95294-8

Kumar, Rakesh and Alex, T C and Khan, Z H and Mahapatra, S P and Mehrotra, S P (2005) Mechanical activation of bauxite - €”potential and prospects in the Bayer process. In: LIGHT METALS 2005. TMS (The Minerals, Metals and Materials Society), pp. 77-9. ISBN 0873395808, 9780873395809

Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2011) Mechanical activation in blended cement processing. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Rakesh and Ray, R K and Biswas, A K (1990) Physico-chemical nature and leaching behaviour of goethites containing Ni, Co and Cu in the sorption and coprecipitation mode. Hydrometallurgy, 25 . pp. 61-83.

Kumar, Ramesh A V and Balasubramaniam, R (1999) Delhi iron pillar rust characterization by fourier transform infrared spectroscopy analysis. NML Technical Journal, 40 (1). pp. 31-36.

Kumar, Ramesh A V and Balasubramaniam, R (1999) Delhi iron pillar rust characterization by mossbauer spectroscopy analysis. NML Technical Journal, 40 (2). pp. 57-61.

Kumar, S G and Bhattacharya, K K and Reddy , PS R and Sastri, S R S (1985) Beneficiation of Thermal coal. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Kumar, Sanjay (2007) Studies on the Geopolymerisation of Fly ash with and without Granulated Blast Furnace Slag. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Kumar, Sanjay and Kumar, Rakesh and Mehrotra, S P (2011) Geopolymers, fly ash reactivity and mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Sanjay and Singh, K K and Das, S K and Ramachandrarao, P (2002) Waste Utilisation : Towards Cleaner Environment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Kumar, Shivesh and Rath, R K and Singh, Ratnakar and Kumar, Anil (2010) Separation of iron bearing minerals from slime by flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Sudip and Sen , Arindam and Kundu, Rajen (2022) Recycling of Valuables from Spent Lithium-Ion Batteries for Sustainable Development in Energy Storage Systems. In: International Conference on Net-zero Emission Technologies for Sustainable Development: Challenges and Opportunities (N0ET-2022), Dec 12-13, 2022, Department of Chemical Engineering Indian Institute of Technology (ISM) Dhanbad, Dhanbad-826004.

Kumar, Sunil and Pattanayek, Sudip K. (2018) Semi-flexible polymer engendered aggregation/dispersion of fullerene (C60) nano-particles: An atomistic investigation. Chemical Physics Letters, 701 (1.815). pp. 22-29.

Kumar, Vinay and Kumar, Manoj and Jha, Manis K and Lee, Jae-chun (2009) Extraction and separation of metals using LIX 84 AND D2EHPA diluted in kerosene from sulfate solution. Proceedings of EPD on Mineral, Metal and Materials Society . pp. 1089-1094.

Kumar, Vinay and Lee, Jae-chun and Jeong, Jinki and Shin, Doyun and Jha, Manis K and Kumar, Vinod (2012) Enrichment of valuable metals from end-of-life printed circuit boards using mechanical recycling techniques. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Kumar, Vinod and Jadhav, G N and Khosla, N K and Chattoraj, U S and Singh, Ratnakar and Bhagat, R P and Nayak, B and Mohanta, M K and Bhattacharyya, K K and Mehrotra, S P (2007) Characterization and its implication on beneficiation of low grade iron ore by gravity separation. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur.

Kumar, Vinod and Jadhav, G N and Khosla, N K and Mehrotra, S P (2010) Implication of process mineralogy for beneficiation of low grade iron ore resources containing high alumina from eastern part of India. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 82-91.

Kumar , Rakesh and Bandopadhyay, A (2002) Clean Technologies in Nonferrous Metals Recycling. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Kumar Das, Anoop and Dey, Shobhana (2012) Project on Reduction of Ash in difficult-to-float non coking Indian coal. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumari, A and Tripathy, A and Rayasam, V (2021) Performance characterization and misplacement studies of liquid-solid fluidized bed density separator for coal beneficiation using Taguchi-ANOVA method. Particulate Science and Technology, 39(4) . pp. 436-448.

Kumari, Aarti and Sinha, Manish K and Sahu, S K and Pandey, B D (2014) Extractive separation of La and Nd using Ionic Liquid as extractant. In: 18th International Conference on Non-ferrous Minerals & Metals -2014, 11-12 July, 2014, Nagpur.

Kumari, Ajita and Rayasam, Venugopal Study of importance of coal fines processing and applicability of different processing routes for improving process efficiency. In: XIX INTERNATIONAL COAL PREPARATION CONGRESS & EXPO 2019, 13-15 November, 2019, INDIA HABITAT CENTRE, NEW DELHI. (Submitted)

Kumari, Ajita and Vasumathi, N and Sai Kumar, M and Abhishek, D S V and Vijaya Kumar, T V Flotation Studies on Optimization of Carbon Recovery from Steel Plant Sludge. In: International Chemical Engineering Conference 2021, September 16-19, 2021, NIT Jalandhar, Punjab. (Submitted)

Kumari, Ajita and Vasumathi, N and Vijaya Kumar, T V (2023) Statistical analysis and optimization studies on recovery of carbon from steel plant sludge. Materials Today: Proceedings .

Kumari, Anjan and Jha, Manis K and Sahu, S K and Hait, Jhumki and Kumar, Vinay and Kumar, J Rajesh and Lee, Jin-Young (2012) TG/DTA studies of the mixture of Korean monazite and sodium carbonate to get optimum condition for phosphate decomposition. In: International Symposium on: Converting challenges into opportunities: Iron & steel, 66th Annual technical Meeting of the Indian Institute of Metals., 16-19 November, 2012, Jamshedpur, Jharkhand.

Kumari, Archana and Jha, Manis K and Hait, Jhumki and Sahu, S K and Kumar, Vinay (2013) Processing of Korean monazite concentrate for the recovery of rare earth metals (REMs). Journal of Indian Chemical Society, 90 . pp. 2105-2110.

Kumari, Archana and Jha, S and Patel, J N and Chakravarty, S and Jha, Manis K and Pathak, D D (2018) Processing of monazite leach liquor for the recovery of light rare earth metals (LREMs). Minerals Engineering, Volume 129, December 2018, Pages 9-14 (IF-3.315). pp. 9-14.

Kumari, Archana and Panda, Rekha and Jha, Manis K and Kumar, J Rajesh and Lee, Jin Young (2015) Process development to recover rare earth metals from monazite mineral: A review. Minerals Engineering, 79 (IF-1.714). pp. 102-115.

Kumari, Archana and Panda, Rekha and Jha, Manis K and Lee, Jin-Young and Kumar, J Rajesh and Kumar, Vinay (2015) Thermal treatment for the separation of phosphate and recovery of rare earth metals (REMs) from Korean monazite. Journal of Industrial and Engineering Chemistry, 21 (IF-2.145). pp. 696-703.

Kumari, Archana and Panda, Rekha and Jha, Manis K and Pathak, D D (2018) Extraction of rare earth metals by organometallic complexation using PC88A. Comptes Rendus Chimie, 21(11) (IF-2.176). pp. 1029-1034.

Kumari, Neha and Vidyadhar, A and Konar, J and Bhagat, R P (2010) Beneficiation of iron ore slimes from Karnataka through dispersion and selective flocculation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kundu, D K and Barman, R K (2002) Coke Oven Emission Standards - A Comparative Assessment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Kunwar, R K and Maulik, S C and Chakravorty, N (1997) Beneficiation of Low Grade Kyanite from Sirboi Mines of Singhbhum District. In: UNSPECIFIED.

Kunwar, R K and Maulik, S C and Chakravorty, N (1997) Beneficiation of low grade kyanite from Sirboi Mines of Singhbhum District. In: UNSPECIFIED.

Kuzev, L and Hristov, N (2000) Vibration grinding - An approach for secondary use of refuse metallic aluminium. In: UNSPECIFIED.

L

Lahiri, A K (1973) On the Direct Reduction of Iron Ore in Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Lal, S M and Ram, Mohan and Gundewar, C S (2010) Beneficiation of a low grade magnetite ore from Jharkhand area. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Lee, Jae-chun (2006) Application of Separation Technology to Waste Water Treatment. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Lee, Jae-chun (2006) Current Status of Recycling of WEEE in Korea. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Liu, Peikun and Cui, Xueqi and Wang, Xiaopeng (2010) Application of new type pre-classification hydrocyclone with centrifugal volute in grinding process. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

M

Mahato, P and Nyati, G and Singh, R J and Mishra, Suman K (2016) Nanocomposite TiSiBC Hard Coatings with High Resistance to Wear, Fracture and Scratching. Journal of Materials Engineering and Performance, 25(9) (IF-1.331). pp. 3774-3782.

Mahato, P and Singh, R J and Pathak, L C and Mishra, Suman K (2016) Effect of nitrogen on mechanical, oxidation and structural behaviour of Ti–Si–B–C–N nanocomposite hard coatings deposited by DC sputtering. Surface and Interface Analysis, 48(10) (IF- 1.132). pp. 1080-1089.

Maity, S and Chandrasekhar, M and Godiwalla, K M and Bhattacharyya, P and Nayak, B and Minj, R K and Mehrotra, S P (2010) A study of separation of iron powder and preparation of Ti-Al alloy by selective electrolysis of ilmenite. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Maity, S K and Shekhar, M Chandra and Ananth, V (2009) An exploratory study of electrodeposition of titanium using titanium dioxide carbon composite anode and molten aluminium cathode. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 118 (1). pp. 10-17.

Majumder, A K and Shah, H and Shukla, P and Barnwal, J P (2006) Water Split Behaviour in Cylindrical and Conical Cyclones. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Makhija, Dilip and Rath, R K and Chakravarty, K and Patra, AS and Mukherjee, A K and Dubey, A K (2016) Phosphorus partitioning and recovery of low-phosphorus iron-rich compounds through physical separation of Linz-Donawitz slag. International Journal of Minerals Metallurgy and Materials, 23(7) (IF-0.943). pp. 751-759.

Malekinia, M and Rezai, B (2006) The Studies of Garnet Deposits of Iran from Industrial Application Point of View. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Malhotra, Tej Bhan (1973) Presidential Address by the Managing Director of Urnamium Corporation of India. NML Technical Journal, 15 (4). pp. 3-4.

Malleswara Rao, V (1985) Factorial Design and Statistical Analysis of Flotation Experiments. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Mallick, Ashish Kumar and Vasumathi, N and Ananda Rao, M and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S (2015) Washability and flotation charactersitics of two different coals reporting as feed to an operating coal washery. In: 31st National Convention of Chemical Engineers & National Seminar on “TECHNOLOGICAL ADVANCEMENT IN CHEMICAL ENGINEERING AND MINERAL PROCESSING”, September 12-13, 2015, Institute of Engineers, Bhubaneswar, Odisha.

Malode, Parag and Chhangani, Ravindra and Datta, Amlan and Basu, Biswajit (2010) DEM analysis of the role of lifter design on performance of rotary cooler. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mandre, N R and Prabhu, S and Gujar, A R and Venugopal, R (2006) Processing of Beach Sand Minerals of Maharastra Coast. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Manju, M S and Savithri, S (2010) Three dimensional cfd simulation of pneumatic coal injection in a direct reduction rotary kiln. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mankhand, T R and Singh, S N and Prasad, P M (1997) Recovery of copper and zinc from an off-grade/complex sulphide concentrate. NML Technical Journal, 39 (4). p. 183.

Mantsevich, M I and Khersonskaya, I I (2000) Use of Organic Depressors for Selective Flotation of Copper -nickel and polymetallic ores. In: UNSPECIFIED.

Maschlanka, W and Kehl, P and Knapp, H and Uhe, H (1973) The Production of Sponge Iron Utilizing the Midland-Ross Process at Hamburger Stahlwerke GMBH. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Maschlanka, W and Kehl, P and Knapp, H and Voss, H (1973) The Use of Sponge Iron in Electric Furnaces. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Mathur, G P and Chakraborty, N (1975) Twenty-five years of dedicated service by National Metallurgical Laboratory to the mineral industries. NML Technical Journal, 17 (3-4). pp. 35-41.

Mathur, G P and Subramanya, G V and Narayanan, P I A (1957) Sintering of Iron Ore Fines, and Raw Materials for Bhilai Steel Plant. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

Mathur, N N and Sen, P C and Rao, M R K (1985) Beneficiation and Utilisation of Low Grade Refractory Materials. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Maulik, S C and Bhattacharyya, K K (2005) Beneficiation of Low Grade Chromite Ores from Sukinda. In: International Seminar on Mineral Processing Technology - (MPT-2005), January 6-8, 2005, Dhanbad.

Maulik, S C and Bhattacharyya, K K (2004) A Beneficiation Scheme for Reduction of Alumina in Iron Ores from Barsua. In: International Seminar on Mineral Processing Technology (MPT-2004) , February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa.

Maulik, S C and Chakravorty, N (1985) A Computer Oriented Algorithm to Determine the Raw-Mixture Composition for Sintering. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR), Jamshedpur.

Maulik, S C and Rafiuddin, S and Chakravorty, N (1986) Dry beneficiation of coal: A review. NML Technical Journal, 28 (1-4). pp. 37-46.

Maulik, S C and Sil, S K and Patnaik, H and Chakravorty, N (1989) Optimisation of Process Variables in Sintering through Statistical design of Experiments. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri.

Medunić, Gordana and Chakravarty, Sanchita and Kundu, Rajen (2022) Computational skills in geosciences higher education system for the 21st century. Mathematical methods and terminology in geology 2022 .

Mehrotra, S P (1998) Computer Aided Design and Synthesis of Flotation Circuits. In: Workshop on Froth Flotation : Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Mehrotra, S P and Kumar, Rakesh and Kumar, Sanjay (2006) Mechanical activation of solids in processing of minerals and wastes. In: Proceedings of the XXIII International Mineral Processing Congress, 3-8 Sept. 2006, Istanbul, Turkey.

Mehrotra, S P and Mishra, B K (1997) Mathematical Modeling of Particle Stratification in Jigs. In: UNSPECIFIED.

Mehrotra, S P and Shekhar, R (2000) Studies on Particle Suspension in Air-agitated Pachuca tanks. In: UNSPECIFIED.

Mehrotra, S P and Singh, Ratnakar (1995) Role of Froth Processes on Flotation. Metals Materials and Processes, 6 (3). pp. 1-22.

Mehta, K D (2011) Role of Pyrite in Selective Bioleaching of Metals from a Complex Sulphide Concentrate. In: Conference Proceedings on XII International Conference on Mineral Processing Technology MPT - 2011, October 20-22, 2011, Udaipur, India.

Mehta, K D and Kumar, Rakesh and Pandey, B D and Mehrotra, S P (2011) Bio-dissolution of metals from activated nodules of Indian Ocean. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mehta, K D and Pandey, B D and Nayak, B and Kumar, Vinod and Upadhyay, A K and Abhilash, (2010) Final Project Report on "Microbial Leaching of uranium from Narwapahar ore". Exploratory (OLP). NML, Jamshedpur. (Submitted)

Mehta, K D and Pandey, B D and Premchand, and Mankhand, T R (2000) Recovery of Valuable Metals from Sea Nodules in Presence of Pyrite and Sulphur. In: International Symposium on Processing of fines - Vol.2, 2000, NML Jamshedpur, Jamshedpur.

Meshram, Pratima and Abhilash, (2019) Recovery and Recycling of Cerium from Primary and Secondary Resources- a Critical Review. Mineral processing and extractive metallurgy review, 41(4) (IF-1.615). pp. 279-310.

Meshram, Pratima and Abhilash, and Sahu, Rina (2020) Environmental impact of spent lithium-ion batteries and green recycling perspectives by organic acids - A review. Chemosphere, 242 (IF-5.778).

Meshram, Pratima and Kumari, Jyotsna and Abhilash, and Pandey, B D (2014) Extraction of V2O5 from Bayer’s Sludge - An Overview. In: Int Bauxite,Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, INDIA.

Meshram, Pratima and Pandey, B D and Abhilash, (2019) Perspective of availability and sustainable recycling prospects of metals in rechargeable batteries – A resource overview. Resources Policy, 60 . pp. 9-22.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2014) Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: A comprehensive review. Hydrometallurgy, 150 (IF-2.224). pp. 192-208.

Meshram, Pratima and Prakash, Uday and Bhagat, Lalit and Abhilash, and Zhao, Hongbo and van Hullebusch, Eric D (2020) Processing of Waste Copper Converter Slag Using Organic Acids for Extraction of Copper, Nickel, and Cobalt. Minerals, 10(3) (IF-2.380). p. 290.

Meshram, Pratima and Purohit, Bijoy Kumar and Sahu, S K and Pandey, B D (2012) Chemical Beneficiation of Indian Non-Coking Coal. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Meshram, Pratima and Purohit, Bijoy Kumar and Sinha, Manish K and Sahu, S K and Pandey, B D (2015) Demineralization of low grade coal – A review. Renewable and Sustainable Energy Reviews, 41 (IF-5.510). pp. 745-761.

Meyer, Gunther and Bongers, Uwe (1973) The Krupp Sponge Iron Process Production and Utilisation of Metallized Materials. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, National Metallurgical Laboratory (CSIR), Jamshedpur.

Meyer, Kurt (1973) Present State of the Sl/Rn Process and Its Application to Indian Raw Materials. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Midha, P P and Gururajachar, A (1985) Effect of Low Grade Copper ore on Process Control and Costing at Mosaboni Concentrator. In: Proceedings of National Semiar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Minister, Chief (1973) Inaugural Address. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Mishra, Asit Kumar and Nayak, B (2011) Characterization and liberation studies of kiriburu low grade iron ore. Training Report (TR). NML, Jamshedpur. (Submitted)

Mishra, B K (2006) Synthesis of Carbide Powder in a Dual Drive Planetary Mill. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Mishra, D and Perumal, A and Srinivasan, A (2011) Composition dependent properties of mechanically alloyed amorphous Fe-Zr-B powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mishra, P K and Asadullah, I M and Lal, H S (2010) Environmental impact of coal-carbonization and its bioremediation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mishra, R S and Mawale, Y K and Janbandhu, Kiran and Meshram, D (2006) Homogenity Study of Bauxite Reference Materials. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Mishra, T and Pal, S and Patel, J N and Bhattacharjee, S (2010) Study on arsenic removal capacity of iron oxide pillared montmorillonite clay from ground water. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mishra, V and Bhoumik, T and Chakravarty, S and Verma, A K and Sharma, Mamta (2016) Influence of coal quality on combustion behaviour and mineral phases transformations. Fuel, 186 (IF- 4.601). 443-455.

Mishra, V and Sharma, Mamta and Chakravarty, S and Banerjee, A (2016) Changes in organic structure and mineral phases transformation of coal during heat treatment on laboratory scale. International Journal of Coal Science & Technology, 3(4) (IF-0.640). pp. 418-428.

Misra, D D (1989) Coal Washery Simulation a Basic Microcomputer Program. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri.

Misra, D D (1997) Computer aided flow sheet design for fine ore circuits. In: UNSPECIFIED.

Misra, D D (1998) Control of Comminution Circuit for Efficient Froth Flotation. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Misra, V N (2002) Development of Waste Management Culture. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Misra , D D (1989) Electrical Seperation of Mineral Raw Materials. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri.

Mitra, Kishalay and Sardar, Gautam and Gopinath, Ravi (2006) Intelligent Control and Optimization: Need of the Time in Mineral Processing Industry. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Moaveni, A Kamali and Noaparast, M and Rezai, B (2010) The effect of different parameters on the power draw of miduk copper concentrator sag mill. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Moazemi, M and Rezai, B (2010) Desilication studies of diasporic bauxite by thermochemical treatment. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mohana Rao, Andavarapu and A, Vidyadhar and Ranjit, Prasad (2021) Beneficiation of difficult-to-wash Indian low volatile coking coal fines by Falcon concentrator. International Journal of Coal Preparation and Utilization . pp. 1-19.

Mohana Rao, S and Banerjee, B and Peravadhanulu, A (1985) Mineral Characterisation of some Indian Phosphatic depo-sits and its influence on their processing problems. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Mohanan, P K and Raghavan, R and Patnaik, S C (1997) Hydrometallurgical extraction and recovery of silver from silver concentrate generated at the zinc electrowinning plant. NML Technical Journal, 39 (2). pp. 77-86.

Mohanta, M K (2007) Geochemistry of Iron Ores. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Mohanta, M K and Rath, R K and Dey, Shobhana and Bhattacharyya, K K (2007) Nanometer Thick Microplaty Hematite in Indian Iron Ores: Its Implication on Washing. In: International Seminar on Mineral Processing Technology (MPT-2007), February 22-24, 2007, Indian Institute of Technology, Bombay.

Mohanta, M K and Rath, R K and Dey, Shobhana and Kumar, Vinod and Bhattacharyya, K K (2008) Contribution of mineralogy and texture in iron ore to fine particulates in mining and allied industry. In: National Seminar on Environmental Management in Mining & Allied Industries, 2008, BHU Varanasi.

Mohanta, M K and Rath, R K and Dey, Shobhana and Kumar, Vinod and Kalyan, K (2008) Effect of mineralogy and texture on the strength of iron ore. In: International Seminar on Mineral Processing Technology (MPT-2008) , April 22-24, 2008, Trivandrum, INDIA.

Mohanta, M K and Rath, R K and Nayak, B (2006) Titanate-Zircon-Apatite Bearing Diorite-Monzodiorites and their Resource Potentiality. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Mohanta, M K and Rath, R K and Sharma, Mamta and Soreng, D R and Mohanty, Sunati and Singh, Ranjeet K and Singh, Ratnakar (2011) Characteristics of Iron Ore Slime from Kiriburu, India. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.

Mohanty, Sunati and Chalavadi, G and Majumdar, A K (2017) Can Hydrocyclone be an Alternative in solid-liquid Separation Process? In: XVI International Seminar on Mineral Processing Technology 2017, 1-3 February, 2017, Mahabalipuram, Chennai.

Mohanty, Sunati and Das, Suchandan K and Majumder, A K (2020) Artificial neural network modeling and experimental investigation to characterize the dewatering performance of a hydrocyclone. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Online 29th Oct, 2019 .

Mohanty, Sunati and Nayak, B and Bhattacharyya, K K (2010) High intensity magnetic separation of iron ore slime and its limitations. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mohanty, Sunati and Nayak, B and Konar, J (2017) Beneficiation of High-alumina Bearing Iron-ore Slime: A Case Study From Eastern India. Journal Mineral Processing and Extractive Metallurgy Review , 38(6) (IF- 1.219). pp. 403-410.

Mohanty, Sunati and Singh, Ratnakar and Bhattacharyya, P and Bhattacharyya, K K (2011) Processing of Fine Grained Iron Ore and Coal Samples Using Multi-Gravity Separator. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Mohapatra, B J and Singh, S K and Rao, D S and Martha, R K and Mishra, S (2010) Characterisation of BOG manganese ore associated with BIF in iron ore group, north orissa for its optimum utilization. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mohapatra, B K and Mishra, P P (2006) Influence of Fabric on Upgradation of Low-Grade Manganese Ores from Bonai-Keonjhar Belt, Orissa. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Molnar, L P (1970) Utilisation of iron ore fines & coal dusts for direct steel production in India-Scope for mini-steel plants. NML Technical Journal, 12 (4). pp. 93-96.

Mondal, B N and Basumallick, A and Chattopadhyay, P P (2011) The magnetic behavior of Cu-Ni-Co-Fe quaternary alloys prepared by Mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mondal, G C and Singh, Abhay Kumar and Singh, T B and Tewary, B K and Sinha, Amlendu (2010) Wet and dry deposition of atmospheric pollutants around coal mining area of Dhanbad and Bokaro District. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mondal, S and Mohanasundaram, M and Sau, D C and Gupta, R K and Kumar, Manoj and Paul, K K and Sirshendu, Dey (2016) Modeling heat transfer of the electrothermal reactor for magnesium production. International Journal of Thermal Sciences, 102 (IF-3.615). pp. 274-284.

Moon, Kwang Soon and Cho, Hee Chan and Oh, Jong Kee Oh (2006) Resource Recycling and Mineral Processing in Korea. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Mostyka, Yu and Shutov, V and Grebenyuk, L and Ahmetshina, I (2000) Investigation of Separation of Fine Materials in Strong Magnetic Fields. In: UNSPECIFIED.

Mrinal , Roy and Bhatnager, P.P (1960) Studies on the extraction of vanadium pentoxide from vanadium bearing titaniferous magnetite ore of Bihar and Orissa. Other (TMP). CSIR NML.

Muduli, S D and Nayak, B D and Rao, D S and Mishra, B K (2011) Immobilization of CR (VI) in ferrochrome flue dust. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Mukherjee, A K and Mishra, B K (2006) A Comprehensive Study to Understand the Role of Process Parameters in Jigging. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Mukherjee, K P and Lahiri, A K (1957) Choice of Corrosion Resisting Materials in Extraction of Metals. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

Mukherjee, R and Verma, S and Mohanty, B D and Rao, S Mohan and Suresh Kumar, T S (2011) Integration of iron ore deposit evaluation and mine plan for selecting cost effective beneficiation operations towards improved resource utilisation: Experience at Tata Steel. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Mukherjee, S K and Pan, S K and Jain, M and Das, A and Srivastava, M P (2006) Beneficiation and Sinter Amenability Study of Iron Ore Slime of Bolani Mines. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Mukhopadhyay, N K (2011) Synthesis of nanocrystalline and amorphous phases in complex metallic alloys during mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mulas, G and Delogu, Francesco (2011) Estimation of mechanochemical effects in heterogeneous processes. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Munro, D and Poetschka, N (2000) Classification of Iron ore Fines at Hamerslev Iron's Paraburdoo Mine. In: UNSPECIFIED.

Murali Sivaram, N and Kameswara Rao, K and Prabhakara Rao, K (1997) The Complications Involved in Processing Graphite Ore from Tapaskonda area, East Godavari district, Andhra Pradesh. In: UNSPECIFIED.

Murthy, G V S and Patel, D and Sahoo, K L (2016) A study of precipitation behaviour of A356 alloy using ultrasonic velocity measurements. Insight - Non-Destructive Testing and Condition Monitoring, 58 (IF-0.527). pp. 367-372.

Murthy, H P S and Chatterjee, A B and Sarkar, N B (1976) Some particulate properties of calcined petroleum coke. NML Technical Journal, 18 (1). pp. 6-9.

Murty , V G K and Rathod, D and Asokan, S and Chatterjee, Amit (2006) Beneficiation of Indian Heavy Mineral Sands- Some New Possibilities Identified by Tata Steel. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Myageri, S S and Tahalramani, D J and Haran, N P and Gundewar, C S (2006) Rapid Determination of Mg, Fe, Al, etc., in Rock Phosphate Samples using Atomic Absorption Spectrophotometer. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

N

Nagabhushana, B R and Sanjeeva Reddy, N (1985) Crushing and Grinding : Practice and Problems in Kalyadi Copper Mine Concentrator. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur.

Naganoor, P C and Prasanna, A S R and Shivaprasad, K H and Bhat, K L (2000) Extraction of manganese from Ferro-manganese slag. In: UNSPECIFIED.

Naik, A N (1973) Future of Sponge Iron in India and Plant Design Data. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Nair, N R and Mukherjee, T K (2000) Various aspects of fines in separation and processing of beach sand minerals in India. In: UNSPECIFIED.

Narasimha, M and Brennan, M S and Holtham, P N (2010) Multi-phase modelling of hydrocyclone: validation of particle size distributions against sampling probe data. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Narasimhan, B R V and Gopalakrishnan, R and Srinivasan, R and Viswanathan, P V and Sankaran, C (1997) Biomass leaching of manganese ore. NML Technical Journal, 39 (3). pp. 143-149.

Narasimhan, K S (1989) Flotation. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri.

Narayanan, P I A (1957) Manganese-ore Beneficiation Plants for India. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

Natarajan, K A (2010) Biotechnological innovations in iron ore beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Natrajan, K A (2006) Biotechnology for Metal Extraction, Mineral Beneficiation and Environmental Control. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Natrajan, K A and Deo, Namita (2000) Mycrobially Induced Processing of Mineral Fines. In: UNSPECIFIED.

Natrajan, R and Nirdosh, I (2006) A Comparative Study of Kinetics of Flotation of a Copper-Nickel Ore by N-Hydrocinnamoyl-N-Phenylhydroxylamine (HCNPHA) Vis-A-Vis Potassium Amyl Xanthate (PAX). In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Nayak, B (2011) Gold in the Beach Placer Sands of Chavakkad-Ponnani, Kerala Coast, India. Journal of the Geological Society of india, 78 (4). pp. 345-348.

Nayak, B (2013) Mineral matter and the nature of pyrite in some high-sulfur tertiary coals of Meghalaya, northeast India. Journal of the Geological Society, 81(2) . pp. 203-214.

Nayak, B (2007) Mineralogical Characterization of Iron Ores. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Nayak, B and Bhattacharyya, K K (2006) Characterization of Limestone Sample from Northeast India and its Implication on Beneficiation. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Nayak, B and Bhattacharyya, K K (2008) Coal Mining in Meghalaya - a boon or bane? In: Proceedings of National Seminar on Environmental Management in Mining and Allied Industries (EMMA-2008), November 7-8, 2008, BHU, Varanasi.

Nayak, B and Das, Swapan K and Bhattacharyya, K K (2011) Detrital and authigenic(?) baddeleyite (ZrO2) in ferromanganese nodules of Central Indian Ocean Basin. Geoscience Frontiers, 2 (4). pp. 571-576.

Nayak, B and Das, Swapan K and Munda, Parikshit (2013) Biogenic signature and ultra microfossils in ferromanganese nodules of the Central Indian Ocean Basin. Journal of Asian Earth Sciences, Volume 73, 5 September 2013, Pages 296–305 (IF-2.379). pp. 296-305.

Nayak, B and Halbach, P and Pracejus, B and Münch, U (2014) Massive sulfides of Mount Jourdanne along the super-slow spreading Southwest Indian Ridge and their genesis. Ore Geology Reviews, 63 (IF-3.383). pp. 115-128.

Nayak, B and Mohanty, Sunati and Bhattacharyya, P (2012) Heavy Minerals and the Characters of Ilmenite in the Beach Placer Sands of Chavakkad-Ponnani, Kerala Coast, India. Journal of the Geological Society of India, 79 . pp. 259-266.

Nayak, B and Sri, Damayanthi and Sharma, Mamta (2011) Mineralogical Constraints on Beneficiation of Low-grade Iron Ores: Case Studies from Jharkhand and Goa. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Nayak, B and Vaish, A K and Singh, S D and Bhattacharyya, K K (2010) Petrography, Chemistry and Economic Potential of the Magnetite Ores of Pokphur Area, Nagaland. MEMOIR GEOLOGICAL SOCIETY OF INDIA, 75 . pp. 341-348.

Nguyen, Tam Thi and Yoo, Kyoungkeun and Jha, Manis K and Park, Jayhyun and Choi, Uikyu and Choe, Hongil and Lee, Jae-chun (2018) Removal of Heavy Metals from Tailing in Citrate Solution with Ferric Chloride. Materials Transactions, Vol. 59(10) . pp. 1665-1668.

Nijhawan, B R (1957) Indian Manganese Ores and their Thermal Beneficiation for Ferromanganese. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

Nijhawan, B R (1957) The National Metallurgical Laboratory in the development of Mineral Beneficiation and Extractive Metallurgical Techniques. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

O

Onal, G (2006) Mineral Industry in Turkey. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Onal, G and Atak, S (2006) Uranium Production as a Byproduct from Yarimca Phosphoric Acid Plan(Turkey). In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Onal, Guven and Acarkan, Neset and Bulut, Gulay and Gul, Alim (2010) Recovery from complex ore by floatation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

P

Padhi, K K (1991) Principle and Application of the Spectrophotometry for the Analysis of Metallurgical Samples. In: Workshop on Modern Methods of Chemical Analysis for Minerals and Metals, January 22-24, 1991, NML, Jamshedpur.

Padmanabhan, K A and Prabu, S Balasivanandha (2011) Ultrafine grained materials through mechanical processing: An assessment. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Padmanabhan, N P H and Suri, A K and Ghosh, S K (2010) R&D input to extraction of uranium from different primary and secondary resources in India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pal, A K and Mishra, B P and Roul, A (2006) Noise Modelling in Highly Mechanised Bauxite Mines - A Case Study at Panchpatmali Bauxite Mines of NALCO. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Pal, J and Ghorai, S and Agarwal, Sanjay and Nandi, B and Chakraborty, T and Das, Goutam and Prakash, S (2015) Effect of Blaine Fineness on the Quality of Hematite Iron Ore Pellets for Blast Furnace. Mineral Processing and Extractive Metallurgy Review, 36 (2) (IF-0.690). pp. 83-91.

Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.

Pal, J and Venugopalan, T and Ghorai, S and Goswami, M C and Prakash, S and Konar, J and Singh, D P (2013) Studies on pellet-sinter composite agglomeration for blast furnace ironmaking. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Pal, S C and Mehta, K D and Abhilash, and Kumar, Vinay and Pandey, B D and Mankhand, T R (2007) Copper biodissolution from a low grade chalcopyrite ore by unadapted/adapted acidithiobacillus ferrooxidans. In: Proceedings of Mineral Biotechnology - 2007, 2007.

Palaniandy, Samayamutthirian and Azizli, Khairun Azizi Mohd and Hussin, Hashim and Hashim, Syed Fuad Saiyid (2011) Changes in the structure of talc by continuous jet milling in relation to imposed specific kinetic energy. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Palit, M R and Rudramuniyappa, M V (2010) Beneficiation studies on low-grade, limestone of Shahabad area, Shahabad, Gulbarga district, Karnataka. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pallavika, and Kalyani, V K and Loveson, V J (2006) Modeling Study of Beach Placer Minerals using Artificial Neural Network: A Case Study. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Panchaxarimath, B P and Puranik, S C (2000) Recovery of gold from Plant/dump Liquors, Gadag Gold Fields, Karnataka, India. In: UNSPECIFIED.

Panda, D K and Sharma, N K and Gotecha, S K (2006) Mineral Beneficiation Potentialities Archaean Limestone for Cement Manufacture. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Panda, Rekha and Kumari, Archana and Jha, Manis K and Hait, Jhumki and Kumar, Vinay and Kumar, J Rajesh and Lee, Jin-Young (2014) Leaching of rare earth metals (REMs) from Korean monazite concentrate. Journal of Industrial and Engineering Chemistry, 20(4) (IF-2.063). pp. 2035-2042.

Panda, S R and Barik, Anil (2010) Impact of iron ore mines generated pollutants on peripheral environment and its effective management—a case study of Koira region, Odisha. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pande, A M and Gupta, K N (1985) Non-coking coal based ironmaking technologies and their relevance to India. NML Technical Journal, 27 (3-4). pp. 25-39.

Pande, A M and Sengupta, P L and Dhananjayan, N and Chakrabarti, H K (1970) Thermal reduction of manganese ores with solid fuels: Part I-charcoal. NML Technical Journal, 12 (3). pp. 65-68.

Pandey, L P (1991) Scenario of Modern Techniques of Analysis. In: Workshop on Modern Methods of Chemical Analysis for Minerals and Metals, January 22-24, 1991, NML, Jamshedpur.

Pandey, S R and Tripathy, T and Bhagat, R P and Singh, R P (2000) Divided Flocculant addition:way to minimize Flocculant Addition. Metals Materials and Processes, 2000, 12 (1). pp. 27-34.

Pani, Santosh and Dey, Shobhana and Mohanta, M K and Singh, Ratnakar (2010) An approach for recovery of iron values from slimes. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pani, Santosh and Dey, Shobhana and Singh, Ratnakar (2013) Quantitative Evaluation of Frother Blend Interaction and Its Effect on Coal Flotation. In: Proceedings of the XIII International Seminar on Mineral Processing Technology (MPT-2013), 10-12 December, 2013, IMMT, Bhubaneswar.

Pani, Santosh and Singh, Siddharth and Paramanick, Subhajit and Dey, Shobhana and Das, Avimanyu (2011) Prospects of Utilization of Low Grade Iron Ore from Kiriburu. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Pansare, J N and Samant, Roopali and Kulkarni, M M and Pandey, P K and Mani, T V (2010) Tailored clays for acid and effluent treatment. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pantke, ING. H.D (1973) Purofer, Industrial Application of Direct Reduction. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Park, Ilhwan and Kanazawa, Yuki and Sato, Naoya and Galtchandmani, Purevdelger and Jha, Manis K and Tabelin, Carlito Baltazar and Jeon, Sanghee and Ito, Mayumi and Hiroyoshi, Naoki (2021) Beneficiation of Low-Grade Rare Earth Ore from Khalzan Buregtei Deposit (Mongolia) by Magnetic Separation. Minerals .

Park, K H and Nam, C W (2006) Treatment of Metal Wastes Containing Ni, Co and Mn with Deep-Sea Manganese Nodules. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Parkih, S C and Purohit, Anil and Verma, Vijay and Agarwal, L K and Singh, Ashish K (2010) Recovery of lead, silver and manganese from anode mud generated at zinc smelter Debari (Udaipur). In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Parveen, Nikhat and Murthy, G V S (2010) Studies on ilmenite for applications as electronic materials. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pashine, S K S and Narasimhan, K S (1985) Indigenous Production of Nickel and Cobalt. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Patel, Bhargav C and Sinha, Manish K and Tipre, D R and Abhilash, and Dave, S R (2014) A novel biphasic leaching approach for the recovery of Cu and Zn from polymetallic bulk concentrate. Bioresource Technology, 157 (IF-5.039). pp. 310-315.

Pathak, P N and De, T C and Chakravorty, N (1989) Beneficiation studies on limestone from Bihar-A case study. NML Technical Journal, 31 (1-4). pp. 12-17.

Pathak, P N and Ranganathan, M V and Chakraborti, D M (1985) A Review on Beneficiation Prospect of Some of the Graphite Deposits of Palamu District of Bihar. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Patil, D P and Nayak, U B (1985) Selective Flotation of Scheelite and Calcite. In: Proceeedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur.

Patil, M R and Nijagunappa, R and Prakash, S and Dixit, R R and Somasekar, B (1985) Studies on Suitability of High Grade Manganese Ore of Bahadurgatta area, Chitradurga District, Karnataka in the manufacture of Electrolytic Manganese Dioxide. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Patil, M R and Shivakumar, K S and Mahapatra, B K and Bhima Rao, R (1997) Characterisation and Liberation of Graphite Schist. In: UNSPECIFIED.

Patil, M R and Shivakumar, K S and Rudramuniyappa, M V and Rao, R Bhima (2000) Flotation studies on graphite ores of shivaganga area, Madurai district, Tamilnadu. Journal of Metallurgy and Materials Science, 42 (4). pp. 233-241.

Patil, Shivraj V (1985) Inaugural Address. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Patnaik, H (1985) Sizing a mill - A Statistical Approach. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Patnaik, H (1989) Statistical Design of Experiment A Tool for Mineral Engineers. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri.

Patnaik, N and Patil, M R and Bhima Rao, R (1997) Effect of Acid Leaching on Recovery of Graphite from Calcareous Deposits. In: UNSPECIFIED.

Patnaik, S K and Murthy, P V R and Vidyasagar, P (2000) Importance of Synthetic Flocculants in Alumina Industry. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 249-254. ISBN 81-87053-53-4

Patra, P and Nagaraju, D R and Somasundaran, P (2011) Impact of pulp rheology on selective recovery of value minerals from ores. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Pattathil, Raghavan (2010) Technology development for kaolin processing. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pazoki, Amir and Rahmani, Omidali and Kefiry, Gholamreza (2006) The Possibility of Replacement of Hydrocyclone D6 instand of D10 for Propose of Increasing of Recovery in Production Line at Chadermaloo Iron Ore Company, Iran. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Peravadhanulu, A and Mathur, G P and Altekar, V A (1982) Some experiences on x-ray fluorescence analysis of ores and minerals. NML Technical Journal, 24 (1-2). pp. 12-16.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P (1979) Beneficiation of Kyanite and Sillimanite. In: UNSPECIFIED.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Benefication of Lead and Zinc Ores. In: UNSPECIFIED.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Benefication Studies on Iron Ores from Orissa. In: UNSPECIFIED.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Benefication Studies on Iron Ores of Bihar. In: Monograph on Ores and Minerals of India - Benefication and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, pp. 84-108.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of Barytes. In: Monograph on Ores and Minerals of Indial - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, pp. 280-281.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of Beach Sands. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. GSI, New Delhi, Janshedpur, pp. 272-275.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of chromites. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Janshedpur, pp. 193-202.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of Copper and Nickel Ores. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Janshedpur, pp. 203-222.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of Dolomite and Magnesite. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Janshedpur, pp. 245-250.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of flurspar. In: Monograph on Minerals of India - Beneficiation and Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Janshedpur, pp. 251-263.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of Foundry and Glass Making Sands. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Janshedpur, pp. 276-279.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of Garnets. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, 282- .

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of Limestone. In: Monograph on Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Janshedpur, pp. 233-244.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of Manganese Ores. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Janshedpur, pp. 163-192.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Coal. In: Monograph on Ores and Minerals of India- Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, pp. 283-290.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) D.T.A. Studies. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Janshedpur, pp. 343-363.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Extent and Geographical Distribution of Indian Ores and Minerals. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniqu. CSIR -NML Jamshedpur, Jamshedpur, pp. 2-15.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Gypsum and Selenite. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, pp. 333-339.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Iron Ores from Rajasthan, Maharashtra, Goa, Andhra Pradesh, Tamil Nadu, Assam, Karnataka, Uttar Pradesh and Nepal. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, pp. 128-150.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Iron Ores of Madhya Pradesh. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. NML Jamshedpur, Jamshedpur, pp. 151-160.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Mineral Beneficiation, Ore-dressing, Ore concentration at NML. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, pp. 65-81.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) National Mineral Policy - Conservation of Mineral Resources and Necessity for Beneficiation. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Janshedpur, pp. 57-60.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Non - Metallic and Refractory Minerals Group. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitaton. CSIR -NML Jamshedpur, Jamshedpur, pp. 24-42.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Non-Ferrous Base-Metals Group Minerals. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploiation. CSIR -NML Jamshedpur, Jamshedpur, pp. 16-23.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Pyrite and Pyrrhotite. In: Monograph on Ores and Minerals of India- Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, pp. 321-332.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Tungsten Minerals. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Janshedpur, pp. 293-306.

Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar , V A (1979) Molybdenite. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, pp. 307-320.

Peravadhanulu, A and Prasad Rao, P D and Mathur , G P and Altekar, V A (1979) Strategic and Fertilizer Minerals Group. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, pp. 43-54.

Peravadhanulu, A and Prasada Rao, P D and Chopra, M S and Narayanan, P I A (1964) Study of the distribution of Hematite in the Band I, Kanjamalai Magnetite deposit, Salem District, Madras. Other (TMP). CSIR NML, Jamshedpur.

Pervadhuanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Beneficiation of Baxite. In: Monograph on Ores and Minerals of India - Beneficiation and Agglomeration Techniques for Industrial and Economic Exploitation. CSIR -NML Jamshedpur, Jamshedpur, pp. 228-230.

Petruk, William (1985) Role of Applied Mineralogy in Mineral Processing. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Pitchumani, B and Ramanan, P (1997) Studies in Ultrafine Particle Production. In: Proceedings of the National Seminar on Processing of Fines. NML Jamshedpur, Jamshedpur, pp. 30-39. ISBN 81-87053-25-9

Poluboyarov, V A and Korotajeva, Z A and Bulgakov, V V and Lyahkov, N Z (2006) Silica Sol Binder for Building Materials. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Ponomaryova, E I and Koizhanova, A K (2010) Redox processes in sulfide minerals biochemical solutions reactions. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Post, G (1973) The Optimum Method for Converting Sponge Iron to Steel in Arc Furnaces. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Prabhakar, S and Bhaskar Raju, G and Khangaonkar, P R (1986) Flotation of sulfide ores uding chelating agents. In: International Symposium on beneficiation and agglomeration, 17-19 December, 1986, Bhubaneswar.

Prabhakar, S and Bhaskar Raju, G and Khangaonkar, P R (1989) Studies on ammoniacal leaching of copper oxide minerals. In: Int. Conference on base metal technology, 8-9 February 1989, NML Jamshedpur.

Prabhakar, S and Bhaskar Raju, G and Misra, V N and Khangaonkar, P R (1990) Studies on the Flotation of Mixed Oxide-Sulphide Ores of Copper from Malanjkhand Deposit India. In: Minerals, Materials and Industry, 2-6 July 1990, Edinburgh, scottland.

Prabhakar, S and Bhaskar Raju, G and Subba Rao, S and Vijaya Kumar, T V (2010) Column flotation technology — NML experience. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prabhakar, S and Bhaskar Raju, G and Subba Rao, S and Vijaya Kumar, T V (2004) Flotation and cyanidation of a semi refractory gold ore. European Journal of Mineral Processing & Environmental Protection, 4 (1). pp. 36-42.

Prabhakar, S and Hanumantha Rao, K and Forsling, Willis (2005) Dissolution of wollastonite and its flotation and surface interactions with tallow-1,3-diaminopropane (duomeen T). Minerals Engineering, 18 . pp. 691-700.

Prabhakar, S and Khangaonkar, P R (1985) Flotation and Adsorption Studies of Chalcopyrite with 8-Hydroxyquinoline. Transactions Indian Institute of Metals, 38 (5). pp. 383-387.

Prabhakar, S and Khangaonkar, P R (1982) Flotation and adsorption studies of chalcopyrite with cupferron. International Journal of Mineral Processing, 9 . pp. 87-95.

Prabhakaram, P (1965) Mineralogy of some Indian Kaolinitic clays and crystalline of Kaolinite. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Prabhakaram, P and Murthy, H P S (1960) Thermo- gravimetric studies on the low-temperature pyrolysis of bituminous coal. Other (TMP). CSIR NML.

Prabhakaram, P and Murthy, H P S (1960) Thermo-gravimetric studies on the low temperature pyrolysis of bituminous coal. NML Technical Journal, 2 (3). pp. 15-19.

Pradip, and Raha, S and Kapur, P C (2000) Computer aided Design and Optimization of Mineral Processing Plants by a State of the Art Simulator. In: International Symposium on Processing of fines - Vol.2. NML Jamshedpur, Jamshedpur, pp. 373-387. ISBN 81-87053-53-4

Pradip, (1998) Process Optimization in Flotation Separation Plants. In: Workshop on Froth Flotation : Recent Trends, Septembe 22-24, 1998, RRL Bhubaneswar.

Pradip, and Singh, Ratnakar and Das, K K and Sankar, T A P and Sunil Kumar, T S and Narsimhan, D and Rao, N K (1991) Studies to Improve the Flotation Recovery in the Benefi-ciation of a Complex mixed Sulphide-Oxide Ore from Malanjkhand, India. Proceeding of XVI International Mineral Processing Congress . pp. 1-7.

Pramanik, S and Sinha, Manish K and Kumari, Aarti and Jha, Manis K and Sahu, S K (2016) Recovery of Rare Earth Oxide from Phosphor Powder of Spent Fluorescent Lamp. In: Hydrometallurgy Conference 2016: Sustainable Hydrometallurgical Extraction of Metals, 1–3 August 2016, Cape Town, South Africa.

Pramanik, Swati and Purohit, Bijoy Kumar and Meshram, Pratima and Sahu, S K and Pandey, B D (2013) Chemical Beneficiation of Physically treated Hingula coal on Laboratory scale. In: Proceedings of the XIII lnternational Seminar on Mineral Processing Technology (MPT-20 I 3), 10/12/2013 to 12/12/2014, CSIR-IMMT, Bhubaneswar.

Prasad, A B Krishna and Ravindran, Indira and Ravi, B P and Haran, N P and Majumdar, A (2010) Optimization flotation studies on a phosphorite sample from Jhamarkotra, Udaipur district, Rajasthan, India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, Bably and Sangeeta, Kumari and Tewary, B K (2010) Utilisation of geosynthetic liner for prevention of ground water contamination due to coal ash disposal in abandoned open cast mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, K and Prasad, Lakshman and Rao, P V T (2010) Preparing superior grade raw materials to enhance the viability of Indian sponge iron sector. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, M S (1972) Infrared study of the adsorption of mixed collectors on Galena and Anglesite. NML Technical Journal, 14 (1). pp. 24-33.

Prasad, P M and Mankhand, T R and Prasad, AJ K (1997) Molybdenum extraction process: An overview. NML Technical Journal, 39 (2). pp. 39-58.

Prasad, Ranjit and Chaudhary, Akhilesh (2010) Phase transformation of friable chromite ore during heating in the inert atmosphere. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, Ranjit and Verma, Meenu and Kumari, Kriti (2010) The phytoavaibility and phytomining of uranium. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, Sanjay (2010) Kinetics of chromium extraction as sodium chromate from stainless steel dust. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, Sanjay and Pandey, B D (1997) The progress of reactions in roasting of chalcopyrite by thermoanalytical studies. NML Technical Journal, 39 (4). pp. 229-238.

Prasad, Sidheshwar and Chatterjea, A B (1969) Heat balance for iron making in experimental low-shaft furnace. NML Technical Journal, 11 (4). pp. 68-82.

Prasad, Sidheshwar and Chatterjea, A B (1973) Reactivity of some low temperature carbonized cokes made from non-coking coals. NML Technical Journal, 15 (2). pp. 29-35.

Prasad , L (1969) Mineral Processing Plant Design and cost Estimate. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri.

Prasad , L and Safvi, S M M (1985) Some Aspects of Coal Flotation at Washeries of Tata Steel. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Prasad Rao, P D and Kunwar, R K (1997) Washing studies with a limestone sample for reduction of insolubles: a case study. In: Processing of fines: Proceedings of the national seminar, Jan 9-10, 1997. NML, Jamshedpur, pp. 141-148. ISBN 81-87053-25-9

Prasada Rao, P D and Satyanarayana, C and Vijayaraghavan, K and Mathur, G P (1972) Beneficiation studies with a pyrite-pyrrhotite sample from Saladipura, Rajasthan. NML Technical Journal, 14 (2). pp. 56-59.

Puttewar, S P and Bhukte, P G (2006) Phase Transformation of Minerals in Bauxite. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

R

Radhakrishnan, V R (1989) Control of Mineral Processing Operations. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri.

Rafiuddin, S and Srivastava, J P and Chakaravorty, N (1985) Studies on Beneficiation of Ferruginous Manganese Ores using solid Reductants. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Raghavan, P and Chandrasekhar, S and Ramaswamy, S (2000) Processing of china clay by super-conducting high gradient magnetic separation. In: International Symposium on Processing of Fines. NML Jamshedpur, Jamshedpur, pp. 108-113. ISBN 81-87053-53-4

Raghavan, P and Chandrasekhar, Sathy and Chandra, Anoop I R and Ramaswamy, and John, V and Antony, V (2006) Development of a Beneficiation Flow Sheet for Processing Silica Sand from Chertala Area of kerala. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Raghu Kumar, C and Tripathy, Sunil Kumar and Mohanan, Srijith and Venugopalan, T and Suresh, N (2010) Evaluation of floatex density separator performance using silica sand. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rai, S R and Sahay, P N (1985) Necessity of Particle size studies of Ores from Bihar by the Mineral Industry. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur.

Rai, Satish K and China, M and Mukherjee, A K and Das , A and Ranjan, R and Satpathy, R R (2006) Process Study of Joda East Washing Plant, Tata Steel. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Rajamani, Raj K (2006) Evaluation of Shell and Pulp Lifters in Semiautogenous Mills with the Dem Simulation. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Raju, G B and Ratchambhigai, S and Rao, M A and Vasumathi, N and Kumar, TVV and Prabhakar, S and Rao, S Subba (2016) Beneficiation of Barite Dumps by Flotation Column; Lab-Scale Studies to Commercial Production. Transactions of the Indian Institute of Metals, 69(1) (IF-0.533). pp. 75-81.

Rakshit, K N (1997) Recovery of Iron Values from Slimes and Dewatering of the Concentrate. In: Proceedings of the National Seminar on Processing of Fines. NML Jamshedpur, Jamshedpur, pp. 77-83. ISBN 81-87053-25-9

Ram, Mohan and Lal, S M (2010) Systematic characterization of bentonitic clay and its industrial significance. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rama Murthy, Y and Rao, Chenna B and Kapure, Gajanan and Tathavadkar, V (2010) New prospective for the utilisation of Indian lateritic chromite overburden. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Ramachandran, E G (1957) Electrolysis of Fused Anhydrous Aluminium Chloride and Chlorination of Salem Bauxite. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

Raman, P V and Banerjee, S K and Narayanan, P I A (1970) Beneficiation of graphite with particular reference to samples from Andhra Pradesh. NML Technical Journal, 12 (1). pp. 5-8.

Raman, P V and Narayanan, P I A (1960) Beneficiation of Limestone from Govt. cement factory Churk U.P. Other (TMP). CSIR NML.

Raman, P V and Subramanya, G V and Narayanan, P I A (1961) Studies on the suitability of water from Laksmansager in Dungarpur from the nearby deposits. Other (TMP). CSIR NML.

Ramana Rao, K V (1997) Fourier transform infrared spectroscopic studies on bauxites and their phase analysis. NML Technical Journal, 39 (4). pp. 195-202.

Ramaswamy, S and Raghavan, P (2010) Investigations on a kaolin sample from kerala for possible value addition. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rambabu, Ch. and Majumdar, K K (1985) Developments in Phosphate-rock beneficiation and the problems with Indian phosphorites. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Rambabu, Ch. and Majumdar, K K (1972) Phosphorite deposits in India and their beneficiation. NML Technical Journal, 14 (2). pp. 82-88.

Rambabu, Ch. and Narasimham, J B and Rao, G V U and Majumdar, K K (1972) Recovery of economic minerals from the Carbonatite-Sevattur (Tamil Nadu). NML Technical Journal, 14 (2). pp. 76-81.

Randhawa, N S and Mishra, D and Smita, K and Konar, J and Jana, R K (2010) Silicomanganese production from manganese nodules leach residue by blending with manganese ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Ranganathan, M V and Chakrabarti, D M and Chakravorty, N (1979) Beneficiation of low grade graphites of Palamau district. NML Technical Journal, 21 (1-2). pp. 1-5.

Ranganathan, M V and Chakravorty, N (1985) Beneficiation studies on some important copper ores at NML-A review. NML Technical Journal, 27 (1-2). pp. 17-21.

Ranganathan, M V and Chakravorty, N (1985) Experimental Processing of some of the Indian Clays for Chemical Purposes. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Ranganathan, M V and Chakravorty, N (1984) Experimental processing of some of the Indian clays for commercial purposes. NML Technical Journal, 26 (3-4). pp. 52-55.

Rao, A Mohana and Rath, R K and Mohanta, M K and Dey, B and Sahoo, M and Singh, Ratnakar (2017) Beneficiation Studies on Low Grade Chromite Ores using Multi Gravity Separator. In: International Conference on Mineral Processing Technology (MPT-2017), 2017, Mahabalipuram, Chennai.

Rao, B Ashwath and Kumar, Abhishek and Sinha, S N (2010) A study of froth flotation of coal using artificial neural networks. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rao, B S S and Goel, S K and Prakash Rao, M S (1985) Beneficiation of Bababudan Low Grade Magnetite ores - A Technical Appraisal. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur.

Rao, B Venkoba and Gopalakrishna, S J (2010) Simulation studies on robustness of multi-stage gravity circuit performance by random perturbations. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rao, B Venkoba and Kapur, P C and Datta, Amlan (2006) Self-Similar Distributions of Fine Particles Produced in Non-Linear Batch Grinding. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Rao, Bhima R and Veeresh, M B and Reddy, P S R (2000) Flotation Kinetics of Coking Coal Fines. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 199-208. ISBN 81-87053-53-4

Rao, D S and Acharya, B C and Sahoo, R K (2000) Role of Mineralogy, Mineral Chemistry and Geochemistry in Mineral Processing : A case study for High Phosphorous manganese ores of Nishikhal, South Orissa, India. In: Proceedings of the National Seminar on Processing of Fines. NML Jamshedpur, Jamshedpur, pp. 25-50. ISBN 81-87053-53-4

Rao, D S and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Vijaya Kumar, T V (2009) Mineralogy and Geochemistry of a low grade iron ore sample from Bellary-Hospet sector, India and their implications on beneficiation. Journal of Minerals & Materials characterization & Engineering, 8 (2). pp. 115-131.

Rao, D S and Bhaskar Raju, G and Prabhakar, S and Vijaya Kumar, T V (2009) Beneficiation of siliceous limestone sample. AT Mineral Processing, 50 (6). pp. 36-47.

Rao, D S and Singh, Ratnakar and Banerjee, B and Bhattacharya, K K and Maulik, S C (1997) Characterisation and Beneficiation Studies on a Low Grade Fluorspar Sample. Vistas in Geological Research . pp. 1-8.

Rao, D S and Subba Rao, S and Vijaya Kumar, T V and Reddy, P S R and Bhaskar Raju, G and Prabhakar, S and More, P (2005) Beneficiation of iron ore fines by conventional flotation, flotation column and dual extraction column – A pilot scale study. Powder Handling & Processing, 17 (2). pp. 88-93.

Rao, D S and Vijaya Kumar, T V and Bhaskar Raju, G and Prabhakar, S (2011) Effect of the particle size on flotation performance of a siliceous limestone sample. Journal of Mining and Metallurgy, 47A (1). pp. 37-49.

Rao, D S and Vijaya Kumar, T V and Bhaskar Raju, G and Prabhakar, S (2011) Geochemical assessment of a siliceous limestone sample for cement making. Chin. J. Geochem, 30 . pp. 33-39.

Rao, D S and Vijaya Kumar, T V and Bhaskar Raju, G and Prabhakar, S and Ghosh, T K (2005) Alteration characteristics of illmenites from south India. Journal of Minerals and Materials Characterization and Engineering, 4 (1). pp. 47-59.

Rao, D S and Vijaya Kumar, T V and Rao, S Subba and Prabhakar, S and Bhaskar Raju, G (2005) Characterization of Srikurmum and Navaladi Beach Placer Minerals. In: International Seminar on Mineral Processing Technology - (MPT 2005), January 6-8, 2005, Dhanbad.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2005) Alteration characteristics of manavalakurichi beach placer illmenite, Tamilnadu. Journal of Applied Geochemistry, 7 (2). pp. 195-200.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2011) Beneficiation of Low-Grade Limestone Sample. Mining Science and Technology, 21 . pp. 631-636.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2011) Effectiveness of sodium silicate as gangue depressants in iron ore slimes flotation. International Journal of Minerals, Metallurgy and Materials, 18 ( 5). pp. 515-522.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2007) Effects of oxidation of minerals on physico-chemical properties pertaining to gravity separation. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur.

Rao, G N (1970) Design of risers by the cooling curve method. NML Technical Journal, 12 (2). pp. 49-52.

Rao, G N and Ram, M (1983) Differential thermal analysis of bentonite clays. NML Technical Journal, 25 (3-4). pp. 27-34.

Rao, G N and Ram, M and Sharma, T L (1983) Electron diffraction analysis of gas treated Indian bentonite clays. NML Technical Journal, 25 (3-4). pp. 35-45.

Rao, G N and Sinha, S K and Beck, T A (1978) The effect of humidity and temperature on the hardening characteristics of sodium silicate bonded self-setting sand mixes. NML Technical Journal, 20 (1-2). pp. 24-29.

Rao, G N and Sinha, S K and Beck, T A (1978) The effect of humidity and temperature on the hardening characteristics of sodium silicate bonded self-setting sand mixes. NML Technical Journal, 20 (1-2). pp. 24-29.

Rao, G V and Rao, K K and Sastri, S R S (2006) Performance Evaluation of the Indigenous Commercial Flotation Columns for Zinc Cleaning at Rajpura Dariba Plant of HZL in Rajasthan. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Rao, K Anand and Sreenivas, T and Venkitakrishnan, R R and Serajuddin, Md. and Karthikayini, P and Padmanabhan, N P H (2010) A kinetic model for alkaline leaching of uranium from dolomitic limestone ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rao, K Eswara and Ramesh, M and Suresh, K and Krishna, V Rama and Rao, D V Subba and Chaudhuri, S and Chattopadhyay, U S and Sharma, K K and Gouri Charan, T and Haldar, D D (2010) Laboratory flotation studies of imported coking coal fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rao, K Kameswara (1972) Beneficiation of graphite from Srikakulam and Visakhapatnam Districts, Andhra Pradesh. NML Technical Journal, 14 (2). pp. 67-72.

Rao, K V and Dey, Shobhana (2007) Comparative Studies of Different Frothers vis-a-vis Lowering of Ash Content in a Coking Coal from West Bokaro, India. IE(I) Journal-MN, 87 . pp. 10-12.

Rao, K V and Kumar, T V Vijaya and Kumar, R K and Maulik, S C (2000) Flotation Studies on Coking coal Sample from West Bokaro. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Rao, K V and Vidyadhar, A (2006) Comparative Studies between Jigging and HMS for Lowering of Ash in a Coal Sample from Assam. In: International Seminar on Mineral Processing Technology (MPT-2006), March 8-10, 2006, Chennai.

Rao, K V Ramana and Chandwani, H K (1997) The influence of organics in the extraction and productivity of alumina. NML Technical Journal, 39 (3). pp. 157-166.

Rao, M R K (1957) Phase relationships in the stabilization of Dolomite. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Rao, M R K and Dutt, Ashimesh and Sen, P C and Bhaskar Rao, H V (1963) Studies on the Utilization of Almora Magnetite: Part-I Occurrence and Mineralogy. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Rao, M S and Ram, Mohan and Gundewar, C S (2010) Process development for recovery of chromite values from COB plant tailing samples collected from various operating plants in Sukinda. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rao, Malleswara V. (1972) Behaviour of rocks in crushing. NML Technical Journal, 14 (2). pp. 89-92.

Rao, N V C and Sutaone, A T and Gundewar, C S (2006) Characterization of Rampura-Agucha Lead-Zinc Ore using Electron Probe Micro Analyzer (EPMA) in View of Beneficiation. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Rao, P V T and Sripriya, R and Mohanty, O N (2002) March Towards Green Steel Production-Efforts at Tata Steel. In: Clean Technologies for Metallurgical Industries (EWM - 2002), 24-25 January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur.

Rao, R K (1962) Mineralogy and liquidus determination of some low shaft furnace slag by hot stage microscopy. NML Technical Journal, 4 (2). pp. 21-25.

Rao, R K (1973) A Study of Ring Formation of Sponge Iron in the Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Rao, S Mohan and Rao, P V T and Choudhury, B Roy (2000) Efficacy of Gravity Separation as an Alternative to Froth Flotation for Treating Jharia group Coal fines. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 160-167. ISBN 81-87053-53-4

Rao, T C (2000) Dense Medium Cyclone. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 127-140. ISBN 81-87053-53-4

Rao, T C (1989) Gravity Classification and Hydrocyclone. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri.

Rao, T C (1985) Hydrocyclone - A useful Tool in Comminution Circuit. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Rao, T R Ramachandra (2006) Direct Reduced Iron Industry in India - Problems and Prospects. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Rao , D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2004) Heavy mineral distribution in the beach sands of North coastal Andhra Pradesh and South coastal Tamilnadu. SGAT Bulletin, 5 (2). pp. 1-9.

Rao , Y K (1973) Recent Developments in the Kinetics and Mechanism of the Direct Reduction of Hematite with Solid Carbon. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Rastogi, M C and Das, B K L (1985) Simulated Model Studies on the Beneficiation of Calcareous Phosphate Ore. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Rath, R K and Dey, Bulti and Mohanta, M K and Prusty, L K and Singh, Ratnakar (2017) Recovery of chromite values from tailings of COB plant using enhanced gravity concentrator. In: International Conference on Mineral Processing Technology (MPT-2017), 2017, Mahabalipuram, Chennai.

Rath, R K and Dey, Shobhana and Mohanta, M K and Singh, Ratnakar and Kumar, Vinod and Bhattacharyya, K K (2007) Processing of low grade iron ore from Singhbhum-north Orissa craton using gravity concentration techniques. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur.

Rath, R K and Kar, A K and Mohanta, M K and Singh, Ratnakar and Kumar, Anil (2011) Surface Chemical and Settling Studies on Hematite, Quartz and Kaolinite in Presence of Organic Reagents. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udaipur.

Rath, R K and Kar, S (2010) A numerical model for cyclic solid-liquid phase change. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rath, R K and Kumar, Shivesh and Singh, Ratnakar and Kumar, Anil (2017) Effect on air quality and treatment of solid waste generated during processing of iron ores for steel making. In: National Conference on Environmental issues, challenges and solutions (EICS ' 2016), February 2017, SAIL, Ranchi.

Rath, R K and Mohanta, M K and Singh, Ratnakar (2016) Feasibility of producing sinter fines from a low grade and fine grained hematite-goethitic ore. In: International Conference on MPT-2016, January, 2016, Pune.

Rath, R K and Mohanty, S and Mohanta, M K and Singh, Ratnakar and Bhattacharyya, K K (2010) Efficacy of enhanced gravity separator in processing indian iron ore slime. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rath, R K and Mohanty, Sunati and Mohanta, M K and Singh, Ratnakar and Bhattacharyya, K K (2010) Enhanced gravity separator in processing Indian iron ore slime. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rath, R K and Mohanty, Sunati and Nayak, B and Singh, Ratnakar and Bhattacharyya, K K (2013) A Comparative Study on Processing of High Alumina Hematite Iron Ore by Gravity, Magnetic and Flotation Methods. Journal of Materials Science and Engineering A, 3(5) . pp. 349-354.

Rath, R K and Mohanty, Sunati and Nayak, B and Singh, Ratnakar and Bhattacharyya, K K (2012) A Comparative Study on Processing of High Alumina Hematite Iron Ore by Gravity, Magnetic and Flotation Methods. In: International Mineral Processing Congress (IMPC - 2012), 24 - 28 September 2012, New Delhi, India.

Rath, R K and Mohanty, Sunati and Singh, Ratnakar and Nayak, B and Bhattacharyya, K K (2010) Beneficiation response of a low grade iron ore from eastern India for the production of sinter and pellet feed. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rath, R K and Singh, R and Bhattacharyya, K K (2011) Processing of Coal Waste by Enhanced Gravity Seperation and Froth Flotation. In: Proceedings of International Conference on Coal and Coke, April 7-8, 2011, National Metallurgical Laboratory, Jamshedpur.

Rath, R K and Singh, Ratnakar (2007) Gravity Concentration of Iron Ore. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Ray, P K and Kumaraswamy, A and Bandopadhyay, A and Rao, T C (1985) Performance Studies on the Crushing and Screening Circuit at South Bank Treatment Plant of Hindustan Copper Ltd. In: Processing of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Reddy, I G (1985) Energy Requirements in Size Reduction of Solids. In: Proceddings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpru.

Reddy, P Gopala and Nijagunappa, R and Kumar, G S and Gopalakrishna, S J and Patil, M R and Somasekar, B (1985) Flotation Studies on Low Grade Magnesite Deposits from Sujikonda near Daroji Bellary district, Karnataka State. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Reddy, P S R and Biswal, S K and Prakash, S and Bhaumik, S K and Sastri, S R S (2000) Recovery of Coal fines from Rejects by Column Flotation. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 213-221. ISBN 81-87053-53-4

Reddy, R Purushotham and Nayak, U B (1985) Flotation of Low Grade Copper ore from Kallur, Raichur District, Karnataka. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Reja, Yogesh and Garg, Pallav and Gupta, V K (2010) A model for simulation and control of open-circuit rod milling operation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rekar, C.F. and Zakrajsek, J. (1964) Some experiences and prospects with low-grade iron ores of Rajasthan. NML Technical Journal, 6 (2). pp. 35-38.

Rezai, B and Pazoki, Amir and Ghorbankarimi, G H (2006) Identification of Vanadium on Iron Ore Sample from a Depo-sit in Choghart Area, Iran from Beneficiation Point of View. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Rezai, B and Rahimi, M and Aslani, M R and Eslamian, Atiye and Dehghani, F (2010) Relationship between surface roughness of minerals and their flotation kinetics. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rezai, Bahram and Noparast, Mohammad and Ghoroghi, Ahmad (2006) Investigation of Zinc Oxide Recovery by Column Flotation. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Rosen, Robert (2006) Production of Soft Ultrafine Functional Mineral Fillers with Super-Size Air Classifiers. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Rosenkranz, Jan (2010) Pressure agglomeration in solids processing— fundamentals and recent developments. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Ross, H U (1973) The Fundamental Aspects of Iron Ore Reduction. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Rout, S and Abhilash, and Meshram, Pratima and Zhang, PT (2023) A Comprehensive Review on Occurrence and Processing of Phosphate Rock Based Resources- Focus on REEs. Mineral Processing and Extractive Metallurgy Review .

Routray, Sunita and Rao, R Bhima and Padhi, L N and Mishra, B and Panda, B K (2010) Recovery of placer zircons from konark— ramchandi beach and dunes and its value addition for refractory industries. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Roy, Animesh and Srivastava, R R and Smita, K and Mishra, D and Agrawal, A and Hait, Jhumki and Sahu, K K (2010) Acid pressure dissolution of matte produced from the alloy obtained from direct smelting of sea nodules. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Roy, Bhaskar (2010) Utilisation of india’s iron ore resources— present situation and future possibilities. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Roy, Rajat K and Das, Swapan K (2013) Failure of LTSH tubes in a coal fired thermal power plant. Metal News, 16(2) (Non-SCI). pp. 14-16.

Roy, Rajat K and Sarkar, Partha and Singh, Satnam and Panda, A K and Mitra, A (2011) Crystallization kinetics and giant magneto impedance behavior of FeCo based amorphous wires. In: TMS 2011, 27 Feb- 3 March, 2011, San Diego, CA, USA.

Roy, S and Das, A (2006) A Comparative Study on Characterisation and Processing of Iron Ore Slimes. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Roy, Subrata and Das, Avimanyu (2007) Feasibility of Producing Pellet Grade Concentrate by Beneficiation of Iron Ore Slime in India. Separation Science and Technology, 42 (14). pp. 3271-3287.

Roy, Subrata and Das, Avimanyu (2013) Recovery of Valuables From Low Grade Iron Ore Slime and Reduction of Waste Volume by Physical Processing. Particulate Science and Technology: An International Journal, 31(3) (IF-). pp. 256-263.

Roy, Subrata and Das, Avimanyu and Sarkar, B and Bhattacharyya, K K (2007) Separation response of iron ores during gravity concentration. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur.

Roy, Subrata and Das, Avimanyu and Venkatesh, A S (2008) A comparative mineralogical and geochemical characterisation of iron ores from two Indian Precambrian deposits and Krivoy rog deposit, Ukraine: implications for the upgrading of lean grade ore. Applied Earth Science : IMM Transactions section B, 117 (3). pp. 125-147.

Roy, Subrata and Mandal, S K and Das, Avimanyu (2012) Segregation and Process Features in a Teeter Bed Separator as Revealed by High Speed Videography and Image Processing. Mineral Processing and Extractive Metallurgy Review: An International Journal, 06 Aug 2012 .

Roy, Subrata and Mandal, S K and Das, Avimanyu (2014) Segregation and Process Features in a Teeter Bed Separator as Revealed by High-Speed Videography and Image Processing. Mineral Processing and Extractive Metallurgy Review, 35(1) (IF-0.690). pp. 15-22.

Roy, Subrata and Venkatesh, A S (2009) Banded Iron Formation to Blue Dust: mineralogical and geochemical constraints from the Precambrian Jilling-Langalata Deposits, Eastern Indian Craton. Applied Earth Science : IMM Transactions section B, 118 (3-4). pp. 178-188.

Roy, Subrata and Vidyadhar, A and Konar, J and Das, Avimanyu (2012) Metal Enrichment of Finely Ground Electronic Waste using Eddy Current Separation. Separation Science and Technology, 47 (12). pp. 1777-1784.

Rudramuniyappa, M V (1997) Iron ore Fines and their Impact on Environment in Sandur-Hospet region,Bellary district, Karnataka, India. In: Proceedings of the National Seminar on Processing of Fines. NML Jamshedpur, Jamshedpur, pp. 273-278. ISBN 81-87053-25-9

Rudramuniyappa, M V and Pampapathi, and Huballi, J (2000) Studies on Composite Pre-reduced Pellets of Iron Ore Fines of Sandur area , Bellary district, Karnataka, India. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 263-268. ISBN 81-87053-53-4

Rudrappa, C and Hubballi, P H and Appanagoudar, S M (1997) Selective Leaching of Iron from Low Grade Ferruginous Manganese Ores of Sandur area, Karnataka for Ferromanganese Production by using Sucrose in Sulphuric Acid Medium. In: Proceedings of the National Seminar on Processing of Fines. NML Jamshedpur, Jamshedpur, pp. 117-122. ISBN 81-87053-25-9

S

Safi, Madian and Rao, M Bhagawanth and Rao, K Surya Prakash (2006) High Grade Phosphate from Syrian Phosphate at Eastern Mines. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Sah, Rakesh and Dey, S K and Vidyadhar, A and Das, Avimanyu (2010) Investigation on the applicability of advanced gravity separation for cleaning semi coking coal fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sah, Rakesh and Vidyadhar, A and Das, Avimanyu (2016) Study of cut point density and process performance of floatex density separator in fine coal cleaning. Particulate Science and Technology (IF-0.52). pp. 1-8.

Sah, Rakesh and Vidyadhar, A and Das, Avimanyu (2017) Study of cut point density and process performance of Floatex density separator in fine coal cleaning. Particulate Science and Technology, 35(2) (IF-0.784). pp. 239-246.

Saha, A K (1999) Chemical upgrading of deep-sea manganese nodules. NML Technical Journal, 40 (4). pp. 177-182.

Saha, A K and Khan, Z H and Premchand, (1997) By-product recovery of nickel and cobalt from tungsten scrap. NML Technical Journal, 39 (4). pp. 203-207.

Saha, A K and Srinivasan, S R and Akerkar, D D (1985) Acid treatment for purification and enrichment of low grade molybdenite concentrates. NML Technical Journal, 27 (3-4). pp. 46-55.

Saha, A K and Srinivasan, S R and Akerkar, D D (1985) Removal of copper and nickel from low grade molybdenite concentrates. NML Technical Journal, 27 (3-4). pp. 40-45.

Saha, D and Chakravarty, S and Shome, D and Basariya, M R and Kumari, A and Kundu, AK and Chaterjee, D and Adhikari, J and Chaterjee, D (2016) Distribution and affinity of trace elements in Samaleswari coal, Eastern India. Fuel, 181 (IF-4.601). 376-388.

Saha, D and Chatterjee, D and Chakravarty, S and Mazumder, S (2018) Trace element geochemistry and mineralogy of coal from Samaleswari open cast coal block (S-OCB), Eastern India. Physics and Chemistry of the Earth, 104 (IF-1.426). pp. 47-57.

Sahoo, M and Bhowmik, Tishrota and Mishra, V and Pal, S and Sharma, Mamta and Chakravarty, S (2019) Significance of coal quality on thermoplastic properties: a case study. International Journal of Coal Preparation and Utilization .

Sahoo, Saroj and Tripathy, Sunil and Nayak, A. and Hembrom, K. C. and Dey, S. and Rath, R.K and Mohanta, M. K. (2022) Beneficiation of lithium bearing pegmatite rock: a review. Mineral Processing and Extractive Metallurgy Review .

Sahu, Ashvani Kr and Dey, Shobhana and Bhattacharya, S and Bhattacharya, K K (2011) Comparative Performance Analysis of Collectors in Flotation. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Sahu, B K (2010) Optimal liberation of ore minerals for ore beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sahu, K K and Agarwal, Anup (2008) Recycling of Metals from Secondary Sources Treatment Options. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Sahu, K K and Agarwal, Sanjay and Ojasvi, and Mishra, D and Agrawal, A and Konar, J and Minj, R K and Godiwalla, K M (2010) Removal of manganese and iron from the alloy obtained from direct smelting of sea nodules. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sahu, L and Bhattacharya, S and Dey, Shobhana (2020) The use of release analysis to show the selectivity of reagents towards differently sized feeds of the same coal. International Journal of Coal Preparation and Utilization, Online (IF-2.034).

Sahu, L and Dey, Shobhana (2017) Enrichment of carbon recovery of high ash coal fines using air fluidized vibratory deck separator. International Journal of Coal Science & Technology, 4(3) . 262-273.

Sahu, L and Dey, Shobhana and Bhattacharya, Sumantra (2018) Release Analysis Response to Sized Feeds and Reagent Types. In: Asia Steel International Conference 2018, 6-9 Feb., 2018, Mayfair Hotel, Bhubaneswar, India.

Sahu, S K (2008) Extraction of Base Metals (Copper, Nickel and Cobalt). In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Sahu, S K (2008) Metallurgy of Light Metals. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Sai Kumar, M and Vasumathi, N and Vijaya Kumar, T V (2022) Utilization of Limestone Mineral Wastes for Developing Self-compacting Micro Concrete. In: Abstracts of the International Chemical Engineering Conference 2021: 100 Glorious Years of Chemical Engineering & Technology” (ICheEC2021) , September 17-19, 2021, Online.

Saikia, Niharika and Khare, Puja and Dutta, M N and Baruah, B P (2010) Petrographic studies of Nagaland coals. Proceedings of the XI International Seminar on Mineral Processing, I . pp. 69-74.

Salem, Eng. M W (1973) Reducibility of Aswan Ore and Sinters with Varying Basicity Ratios. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Samal, S and Chaira, D and Chaira, B (2011) Production and stability of al and cu ultrafine particles in nanofluids. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Samanta, Salkat and Goswami, M C and Baidya, T K and Mukherjee, S and Dey, R (2013) Mineralogy and carbothermal reduction behaviour of vanadium-bearing titaniferous magnetite ore in Eastern India. International Journal of Minerals Metallurgy and Materials, 20(10) (IF-0.483). pp. 917-924.

Sane, R Y and Subramanian, N A and Kothari, S V and Pashine, S K S (1985) Conservation of high Phosphorous high Manganese ores by Sintering of Dephosphorised concentrate. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Sankar, Tapan Kumar and Abhilash, and Meshram, Pratima (2024) Environmental Impact Assessment in the Entire Life Cycle of Lithium‑Ion Batteries. Reviews of environmental contamination and toxicology, 262 (5) (6.9).

Sankaran, C and Sen, M C and Bhatnagar, P P (1962) Thermal beneficiation of low grade ferruginous Manganese ores. NML Technical Journal, 4 (2). pp. 26-33.

Sankaran, C and Sen, M C and Bhatnagar, P P (1962) Thermal beneficiation of low-grade ferruginous manganese ores. Other (TMP). CSIR NML.

Sanyal, P and Saha, S K and Khare, R N (1985) Grind Optimisation Studies at Rakha Concentrator by Laboratory Tests. In: Proceedings of the National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Sanyal, S and Chabri, S and Chatterjee, S and Bhowmik, N and Metya, Avijit Kumar and Sinha, Arvind (2016) Tribological behavior of thermomechanically treated Al-Mg-Si alloy by nanoscratch measurements. Tribiology International, 102 (IF-2.903). pp. 125-132.

Sarangi, B M and Kesav, Babu and Sheshadri, M K (2002) Environmental Control Measures in Sponge Iron Industry with Particualr Reference to Tata Sponge Iron Limited. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Sarkar, B (2007) Analysis of Particle Dynamics in Floatex Density Separator. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Sarkar, B and Chandrasekhar, S and Das, Avimanyu (2007) Advanced gravity separators - A review of state of the art technology. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur.

Sarkar, B and Das, Avimanyu and Roy, Subrata and Rai, S K (2008) In depth analysis of alumina removal from iron ore fines using teetered bed gravity separator. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 117 (1). pp. 48-55.

Sarmah, Mridusmita and Khare, Puja and Baruah, B P (2010) Pyrolysis of high sulphur coals: possible sulphate aerosol formation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sasikumar, C and Srikanth, S and Kumar, Rakesh and Alex, T C and Mehrotra, S P (2011) Where does the energy go in high energy milling? In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Sastri, S R S (1998) Column Flotation: Theory and Practice. In: Workshop on Froth Flotation:Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Sastry, K V S and Wilson, T and Moothedath, S K (2000) Influence of Operating Variables on Continuous Flocculation of Mineral Fines. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 237-248. ISBN 81-87053-53-4

Sathe, P and Sarkar, B and Das, Avimanyu (2015) Residence time distribution of solid particles in liquid fluidised bed separator. Canadian Metallurgical Quarterly, 54(1) (IF-0.495). pp. 110-122.

Sathish, P and Beena, R and Jyotsna, T and Pradip, (2006) Surface and Flotation Characteristics of Spodumene:A Molecular Modeling Approach. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Satpathy, Sanjeeb Kumar and Singh, Ratnakar and Rath, R K (2012) Bond Work Index of a Low Grade Iron Ore & Flocculation and Filtration Studies on Its Concentrate & Reject. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Satyanarayana, C and Ramakrishna Rao, G S and Narayanan, P I A (1968) Recovery of Nickel and Apatite from the Copper Ore of Indian Corpn Ghatsila. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,.

Satyanarayana, C and Ranganathan, M V and Banerjee, S K and Mathur, G P (1972) Beneficiation studies on low-grade molybdenite samples from Tamil Nadu. NML Technical Journal, 14 (2). pp. 60-62.

Saxena, V K and Varma, Atul K and Kumar, Gunjan (2010) Effect of stamping and binder on coke quality for LVMC Coal. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sehra, J C and Shah, V D and Rakhasia, R H and Bose, D K (1997) Production of MoO3 from Indian molybdenite concentrate by soda ash roasting. NML Technical Journal, 39 (4). pp. 221-227.

Sekhar, K C (1991) Atomic Absorption Spectrometry - Present and Future. In: Workshop on Modern Methods of Chemical Analysis for Minerals and Metals, January 22-24, 1991, NML, Jamshedpur.

Sen, Aakash and Mohanty, Sunati and Bhowmik, Tishrota and Chakravarty, S (2017) Studies on the cleaning potentialities of non-coking coal by washability study. In: XVI International Seminar on Mineral Processing Technology (MPT-2017) , Feb 1-3, 2017, Chennai,INDIA.

Sen, Arindam and Kumar, Sudip and Kundu, Rajen (2023) Recycling of Cathode Material from Spent Lithium-Ion Batteries for Energy Application. In: International Conference on “Recent Advances in Materials Chemistry and Catalysis” , 1-3 March, 2023, Department of Chemistry- Dibrugarh University ,Dibrugarh 786004, Assam (India).

Sen, M C and Chatterjee, A B (1957) Chemical Beneficiation of Indian Chromites. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

Sen, P K (2010) Exergy analysis of mineral processing flow sheets: implications in process design. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sen, Prithwis C and Ramakrishna Rao, M and Dutt, Ashimesh and Bhaskar Rao, H V (1965) Occurrence and Refractory properties of Rajasthan Magnesite. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Senapati, Bimalananda and Kumar, C Satish and Banerjee, Tonmoy (2010) Water management at Vedanta aluminium Ltd., Lanjigarh refinery. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sengupta, A K and Banerjee, T H and Ram, Mohan (2010) Beneficiation of iron ore fines from mine rejects. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sengupta, B L and Chatterjea, A B and Mathur, G P and Altekar, V A (1973) Operational Aspects of Sponge Iron Production in a Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Sengupta, P L and Dhananjayan, N (1985) Crushing and Grinding of Electrodeposited Manganese Dioxide. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Sepelak, V and Bergmann, I and Indris, S and Heitjans, P and Becker, K D (2011) Crystallite size dependent cation distribution in nanostructured spinels studied by nmr, mössbauer spectroscopy and XPS. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Serajuddin, Md. and Rajan, K C and Anand Rao, K and Sreenivas, T and Padmanabhan, N P H (2010) Filtration studies on a limestone hosted uranium ore leached slurry. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Shah, N,V and Bhaskar Rao, H V (1960) Investigation of the suitability of asbestos from Singhbum District for industrial purposes. Other (TMP). CSIR NML.

Shahani, M J (1964) A prototype vertical kiln for continuous thermal beneficiation. NML Technical Journal, 6 (3). pp. 18-21.

Shahrokhi, Sayed Vahid and Farhadinejad, Taher and Sahamieh, Reza Zarei (2010) Study of mineralization in gholgholeh area based on SEM and fluid inclusion (southwest of saghez city—Iran). Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 57-63.

Shaik, Shamshad and Bagchi, Sudeep and Ghosh, S and Mukherji, A K (2010) Beneficiation of iron ore fines to improve blast furnace productivity. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Shakhtshneider, T P and Myz, S A and Mikhailenko, M A and Dyakonova, M A and Boldyrev, V V (2011) Mechanochemistry and solubilization of drugs. In: International Conference on Mechanochemistry and Mechanical Alloying, 1-4 December 2008, CSIR-NML, Jamshedpur.

Shankargouda, M and Eligar, Suresh and Swamy, Gurubasayya and Sri Raghava, T J (2010) Adaptation of efficient thickeing technology in the circuit for economical recovery of gold at Hutti gold mine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sharma, Abhishek and Rai, Nandani (2010) Effect of burnt lime addition on sintering of iron ore fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sharma, Arun Kumar (2012) Application of infrared thermography for gradation and sorting of iron ores. Masters thesis, NIT, Tiruchirapalli.

Sharma, Arun Kumar and Ghosh, Arpita and Das, T K and Joseyphus, R Justin and Palit Sagar, S (2012) To Establish the Feasibility of IR Thermography for Sorting of Iron Ores for Identifying & Rejecting Alumina Rich Ores. In: NDE 2012, 10th -13th December, 2012, New Delhi India.

Sharma, K K and Sinha, K M K and Gouri Charan, T and Haldar, D D (2010) Generation of fines by crushing the raw coal to different sizes and effects of lab flotation tests on its results using these coal fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sharma, Mamta (2009) Innovations in Natural Coke Studies. In: Proceedings of the Ninety Sixth Session of the Indian Science Congress, Shillong-2009, October 17, 2008, Shillong.

Sharma, Mamta and Singh, A K and Choudhury, Nandita and Bhattacharyya, K K (2010) Petrography of beneficiated heat altered coals from damodar valley coalfields, India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sharma, Mamta and Singh, Ashok K and Shukla, N K and Srivastava, S K and Bhattacharyya, K K (2008) Petrographic investigation of selected natural cokes from Damodar Valley coalfields. In: International Seminar on Mineral Processing Technology (MPT-2008) , April 22-24, 2008, Trivandrum,INDIA.

Sharma, P and Hue, K and El-Shall, H and Powers, K and Moudgil, B (2011) Nano, bio and mineral technologies—mutual leveraging for product and process innovations. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Sharma, R N (1985) Coal Beneficiation - Application of Froth Flotation. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Sharma, R P and Basu, G S and Prasad, S B and Dhillon, A S (2002) Steel Industry and Climate Change. In: Clean Technologies for Metallurgical Industries (EWM)-2002, 24-25, January, 2002, CSIR- National Metallurgical Laboratory, Jamshedpur.

Sharma, T (1997) Extraction of potassium from glauconitic sandstone. NML Technical Journal, 39 (3). pp. 151-156.

Shekhar, Saurabh and Singh, R K and Chalavadi, G (2018) Study of Process Efficiency for High-Ash Fine Coal Cleaning in a Kelsey Centrifugal Jig. International Journal of Coal Preparation And Utilization, 38(5) (IF-1.527). pp. 250-259.

Shukla, S and Bhunia, Kamalendu and Kundu, G and Mukherjee, D (2010) Study of liquid phase mixing characteristics in flotation column. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Shukla, S K and Natrajan, R and Das, K K and Krishnan, R R V and Subrahmanyam, N P and Rao, N K (1985) Improving Scheelite Recovery from Gold Tailings. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Shyam, A K (1984) Geobotanical studies in Singhbhum district Bihar. NML Technical Journal, 26 (1-2). pp. 15-33.

Siddiqui, A S and Mohapatra, A K and Rao, J V (2000) Separation of Beach Sand Minerals. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 114-126. ISBN 81-87053-53-4

Sil, S K and Maulik, S C (1997) Use of blue dust in sintering. In: Processing of fines: Proceedings of the national seminar, Jan 9-10, 1997. NML, Jamshedpur, pp. 249-251. ISBN 81-87053-25-9

Simi, S and Janaki, M E K and Bhat, K H and Das, P N Mohan (2006) Microwave Acid Leaching of Beneficiated Ilmenite for the Production of Synthetic Rutile. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Singh, A K and Shukla, N K and Srivastava, S K and Haldar, D D and Roy, B N and Sharma, Mamta (2009) Precautionary Measures in Determining Volatile Matter in Natural Coke Washability Fractions. International Journal of Coal Preparation and Utilization , 29 (1). pp. 34-47.

Singh, Akhileshwar and Singh, J P (1985) Need for Utilisation of Leaner and Unmarketable ores of Bihar by Innovation in ore dressing and Metallurgical Process. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Singh, Ashok K and Sharma, Mamta and Singh, Mahendra P (2013) SEM and reflected light petrography: A case study on natural cokes from seam XIV, Jharia coalfield, India. Fuel, 112 (IF-3.357). pp. 502-512.

Singh, Ashok K and Sharma, Mamta and Singh, Mahendra P and Choudhury, Nandita (2010) SEM study of some Indian natural cokes (jhama). In: International Pittsburgh Coal Conference, October, 2010, Istanbul, Turkey.

Singh, Ashok K and Shukla, N K and Sharma, Mamta and Choudhury, Nandita (2010) Beneficiation prospects of baked coking coals from seam XV, Jharia Coalfield, Damodar Valley, India. In: International Pittsburgh Coal Conference, October 11-14, 2010, Istanbul, Turkey.

Singh, Gurdial and Dey, M L and Dhananjayan, N (1985) Chemical Beneficiation of Magnesite. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Singh, Harish and Dey, Shobhana and Bhattacharya, S (2011) Release Analysis of Coal. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Singh, K M P and Udayabhanu, G and Gouri Charan, T and Haldar, D D (2010) Flocculation studies on non-coking coal fines using suitable reagents. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Singh, Narinder and Mathur, S B (1973) Survey of indigenous coals, fly ashes and flue dusts as a potential source of germanium. NML Technical Journal, 15 (2). pp. 42-48.

Singh, Nitesh Kumar and Mohanta, M K and Rath, R K (2012) Determination of Shatter Index, Tumbler Index and Bond work Index of Limestone. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Singh, R and Banerjee, B and Srivastava, J P (2004) Effects of Process Parameters on Selective Flotation of Lead-Zinc Ore. In: International Seminar on Mineral Processing Technology (MPT-2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa.

Singh, R K and Mehta, K D and Sharma, Mamta and Bhattacharyya, K K (2011) Effect of Magnetic Field Intensity on Iron ore Separation Efficiency in slimes. Journal of Sustainable Planet, 2 (3). pp. 44-49.

Singh, R K and Mehta, K D and Sharma, Mamta and Bhattacharyya, K K (2011) Performance Evaluation of Magnetic Field Intensity on Iron ore slimes. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Singh, R N and Basu, D (1985) Coal Processing in Indian Context. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Singh, Ranjeet K and Das, Avimanyu (2013) Analysis of separation response of Kelsey centrifugal jig in processing fine coal. Fuel Processing Technology, 115 (IF-2.816). pp. 71-78.

Singh, Ranjeet K and Das, Avimanyu (2012) Study of the separation features of fine coal cleaning in kelsey centrifugal jig. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Singh, Ranjeet K and Kishore, R and Sahu, K K and Chalavadi, G and Singh, R (2020) Estimation of the Fluid Velocity Profile in the Stratification Zone of a Falcon Concentrator. Mining, Metallurgy & Exploration , 37(1) (IF-0.784 ). pp. 321-331.

Singh, Ranjeet K and Sahu, Kisor Kumar and Chalavadi, G and Swain, A K and Singh, Ratnakar (2020) Experimental investigation on the separation capabilities and limitation of Falcon semi-batch concentrator. Separation Science and Technology (IF-1.718).

Singh, Ratnakar (1992) Development of a Reagent Scheme for the Beneficiation of Oxidised Copper Sulphide Ore from Malanjkhand, India. Proceeding of IV International Mineral Processing Symposium, Antalya, Turkey . pp. 1-6.

Singh, Ratnakar (1998) Development of Flotation Reagents with Chelating Functional Groups. In: Workshop on Froth Flotation : Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Singh, Ratnakar (1994) Split Conditioning and Combined Flotation (SCCF) Process: An Innovative approach in Beneficiation of Slimy Rock Phosphate Ore. Innovations in Mineral Processing, Lorentian University, Sudbury,Canada . pp. 1-11.

Singh, Ratnakar and Banerjee, B and Chakrovorty, N (1995) Studies on Concentration of Finely Disseminated Low Grade Graphite Ore. Metals Materials and Processes, 7 (3). pp. 1-6.

Singh, Ratnakar and Banerjee , B and Bhattacharyya, K K and Srivastava, J P (2006) Upgradation of Barite waste to Marketable Grade Concentrate. In: Proceeding of the XXIII International Mineral Processing Congress, 2006, IMPC.

Singh, Ratnakar and Bhattacharya, P and Bhattacharyya, K K and Maulik, S C (2004) Reduction of Alumina in Indian Iron Ores. Metals Materials and Processes, 16 (2-3). pp. 1-14.

Singh, Ratnakar and Bhattacharyya, K K and Maulik, S C (1997) Gravity concentration of fines and ultrafines. In: Processing of fines: Proceedings of the national seminar, Jan 9-10, 1997. NML, Jamshedpur, pp. 40-56. ISBN 81-87053-25-9

Singh, Ratnakar and Bhattacharyya, P and Bhattacharyya, K K (2007) Studies on Recovery of Mineral Values using an Enhanced Gravity Separator. Advanced Gravity Separation . pp. 1-6.

Singh, Ratnakar and Chandrashekhar, S and Rath, R K and Nayak, B and Bhattacharyya, K K (2008) Designing Process for Concentration of a Low Grade Copper Ore. In: International Seminar on Mineral Processing Technology (MPT-2008) , April 22-24, 2008, Trivandrum,INDIA.

Singh, Ratnakar and Das, Avimanyu and Dey, Shobhana and Vidyadhar, A and Rath, R K and Bhattacharyya, K K (2006) Beneficiation of Indian Coking Coal Fines- An Alternate Circuit for Improved Performance. In: International Seminar on Mineral Processing Technology (MPT-2006), March 8-10, 2006, Chennai.

Singh, Ratnakar and Dey, Shobhana and Sinha, N (2017) Performance of Different Classes of Organic Compounds as Frother in De-ashing of Indian Coking Coal by Froth Flotation. Transaction of Indian Institute of Metals, 72(2) (IF-0.91). pp. 433-442.

Singh, Ratnakar and Goswami, M C and Vaish, A K and Das, S K and Goel , R P (2005) NML's Contribution to Development of Indian Steel Industry. Motif . pp. 1-4.

Singh, Ratnakar and Maulik, S C and Rath, R K and Dey, Shobhana and Das, Avimanyu and Nayak , B and Bhattacharyya, K K (2007) Designing Process for Beneficiation of Low Grade Iron Ore Samples from Orissa. In: International Conference on Mineral Processing Technology (MPT – 2007), 2007.

Singh, Ratnakar and Mehrotra, S P (2007) Iron Ore Resources and Beneficiation Practices. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Singh, Ratnakar and Rao, D S and Banerjee, B and Bhattacharyya, K K (2008) Development of Flotation Process for Enrichment of Ganesh-Himal Lead-zinc Sulphide Ore from Nepal. In: Proceedings of XXIV International Mineral Processing Congress, 24-28 SEPTEMBER 2008, BEIJING CHINA.

Singh, Ratnakar and Rao, D S and Sinha, N and Banerjee, B and Bhattacharyya, K K (2009) Mineralogical and flotation characteristics of lead-zinc ore with a particular reference to effects of oxidation. Journal of Metallurgy and Materials Science, 51 (3). pp. 205-213.

Singh, Ratnakar and Rath, R K and Nayak, B and Bhattacharyya, K K (2011) Development of process for beneficiation of Low-grade iron ore samples from Orissa, India. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.

Singh, Ratnakar and Sengupta, P L and Pathak, P N and Chattopadhyay, A and Maulik, S C (2001) Floatation Studies on Processing of a Low Grade Uranium Ore. In: International Conference on Challenges in Coal and Mineral Beneficiation, , NML, Jamshedpur.

Singh, Ratnakar and Sengupta, S K and Pathak, P N and Prasad, S N and Srivastava, J P and Banerjee, B and Chattpadhyay, A and Rao, D S and Maulik, S C and Chakrabarti, C K (2000) Designing Flotation Process for Lead-Zinc ore from Nepal. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 188-198. ISBN 81-87053-53-4

Singh, Ratnakar and Singh, B P (1992) Environmental Pollution by Mill Tailings and Control Methods. Indian Journal of Environmental Protection, 12 (5). pp. 1-6.

Singh, Ratnakar and Singh, P (1996) Beneficiation of Non-coking Coal for Injection in Blast Furnace. In COAL-96 . pp. 1-12.

Singh, Ratnakar and Sinha, N (2010) Floatation studies on a low grade graphite sample from Palamu. Journal of Chemtracks, 12 (1). pp. 71-74.

Singh, Ratnakar and Sinha, S N (2005) Influence of Operating Variables on Flotation of High Ash Coking. In: International Seminar on Mineral Processing Technology(MPT-2005), January 6-8, 2005, Indian School of Mines, Dhanbad.

Singh, Ratnakar and Sinha, S N (2003) Beneficiation of High Ash Indian Coal-Problems and Prospects. The Indian Mining and Engineering Journal . pp. 1-4.

Singh, Ratnakar and Singh, P (2002) Studies on De-Ashing of Non-Coking Coal by Froth Flotation. In: Proceedings of the International Seminar on Mineral Processing Technology , MPT-2002, 3-5 January 2002; Vol.1 (2002 ) 243-249 ; Eds. S . Subramanian , K.A. Natarajan , B.S. Rao and T . R.R. Rao, MPT-2002.

Singh, S K and Singh, A K and Sarangi, A K (2010) Flocculation and filtration studies on uranium ore slurry using some commercial flocculating agents. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Singh, Savinder and Bhandary, V S and Gupte, P K (1967) Investigation on the Kutch Bentonite III. Other (TMP). CSIR- NML ,Jamshedpur, Jamshedpur.

Singh, Yashvant and Deshpande, R J and Subramaniun, S (2006) Surface-Chemical Studies on Graphite Suspensions using Inorganic Disperants. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Sinha, K M K and Chattopadhyay, U S and Sen, K (2000) Recycling and Treatment of Settling Pond Fines - A challenge to Industry and Environment. In: International Symposium on Processing of fines - Vol.2. NML Jamshedpur, Jamshedpur, pp. 416-422. ISBN 81-87053-53-4

Sinha, K M K and Sharma, T and Haldar, D D (2010) Effect of ash of raw and beneficiated coal as well as operating variables on gasification process. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), 1 (Section 6). pp. 498-501.

Sinha, N and Singh, Ratnakar (2011) Studies on chemical processing of graphite from Palamu. Journal of Chemtracks , 13(2) . pp. 489-492.

Sinha, S K and Godiwalla, K M and Shaw, D K and Sivaramakrishnan, C S (2001) Fluid flow behaviour in a water model tundish under open, submerged and modified inlet conditions. Scandinavian Journal Of Metallurgy, 30 (2). pp. 103-107.

Sinha, S N and Agrawal, M K and Prasad, R B and Singh, K K (2002) Proper Management of Metallurgical Wastes - A Paramount Necessity for clean Environment. In: Clean Technologies for Metallurgical Industries - (EWM - 2002), 24-25, January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Sinha, Shivendra and Abhilash, and Meshram, Pratima and Pandey, B D (2016) Metallurgical processes for the recovery and recycling of lanthanum from various resources—A review. Hydrometallurgy, 160 (IF-2.605). pp. 47-59.

Sinhababu, S K and Sinha, S K and Rao, G N (1977) Ferro-chrome slag as harderner for sodium silicate bonded sand. NML Technical Journal, 19 (3-4). pp. 58-60.

Sircar, J K (1999) Mass spectrometry: Instrumental aspect-The source. NML Technical Journal, 40 (4). pp. 135-142.

Sivaiah, S and Rafiuddin, S (1985) A Simple Sub-sieve sizer employing elutriation with water. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Smita, K and Srivastava, R R and Mishra, D and Sahu, K K and Singh, T B and Agrawal, A and Jana, R K (2010) Recovery of valuable metals from sea nodules through reduction-roasting ammonia leaching process. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sontakkey, V A and Rao, M S and Ram, Mohan (2010) Development of simple process flowsheet for a silica sand sample to produce high grade silica sand concentrate from Ratnagiri district, Maharashtra. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sreedevi, P and Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2011) Studies on the Zetapotential of Calcite/p-Sulfonatocalix[ 4,8]arenes. Journal of Dispersion Science and Technology, 32 . pp. 1531-1536.

Sreedevi, P and Chennakesavulu, K and Kavitha, M and Bhaskar Raju, G and Prabhakar, S (2011) Electrokinetic behavior of Fluorite. Journal of Dispersion Science and Technology, 32 . pp. 1306-1310.

Sreenivas, T and Natrajan, R and Padmanabhan, N P H (2000) Processing of fine size minerals : Studies on some Indian uranium ores. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 60-71. ISBN 81-87053-53-4

Sreenivas, T and Rao, K Anand and Rao, M Manmadha and Rajan, K C and Serajuddin, Md. and Karthikayini, P and Padmanabhan, N P H (2010) Autoclave leaching of refractory uranium minerals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sriamoju, S K and Suresh, A and Lingam, R K and Ray, Tathagata and Dash, P S and Banerjee, P K (2010) Determination of diffusion coefficient for coal leaching process. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Srikanth, S (2015) CSIR-NML Equipment Facility Handbook. CSIR-National Metallurgical Laboratory, Jamshedpur.

Srikanth, S and Rao, D S and Das, Swapan K and Ravi Kumar, B and Nandakumar, K and Dhanuskodi, R and Vijayan, P (2003) Combustion and deposit formation behavior on the fireside surfaces of a pulverized fuel boiler fired with a blend of coal and petroleum coke. Combustion Science and Technology, 175 (9). pp. 1625-1647.

Srivastava, A K and Jaggi, T N (1985) Beneficiation of Fertilizer Minerals - Saladipura - An Experience. In: Proceedings of National Seminar on Mineral Processing and IX Annual Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur.

Srivastava, B N (2010) Analysis of iron ore by axios-advanced x-ray fluorescence spectrometer using potassium pyro-sulphate fusion technique. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 47-50.

Srivastava, M P and Sutaone, A T and Ghosh, S K and Raju, K S (1997) Beneficiation of Iron ore Fines from Large Deposits of Waste Dumps. In: Proceedings of the National Seminar on Processing of Fines. NML Jamshedpur, Jamshedpur, pp. 297-306. ISBN 81-87053-25-9

Srivastava, Nidhi and Dhal, B and Abhilash, and Pandey, B D (2014) Bioreduction of hexavalent chromium by Bacillus cereus isolated from chromite mine overburden soil. Advanced Materials Research, 828 . pp. 81-91.

Srivastava, S C (1991) X-Ray Fluorescence Spectrometry in Metals and Minerals Analysis. In: Workshop on Modern Methods of Chemical Analysis for Minerals and Metals, January 22-24, 1991, NML, Jamshedpur.

Srivastava, Y P (1991) Advances in Spectroscopy. In: Workshop on Modern Methods of Chemical Analysis for Minerals and Metals, January 22-24, 1991, NML, Jamshedpur.

Statsjuk, V N and Kenzhaliev, B K and Fogel, L A (2010) Elecrocemical formation of semiconductor nanocrystalline thin films from complex electrolyts. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Stelter, Ing. Michael (2006) Scrap - An Excellent Raw Material. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Subramanian, M and Bhatnagar, P P (1960) -Studies on the reducibility of beneficiated tisco iron ores. Other (TMP). CSIR NML.

Subramanian, N Ganapathy and Natrajan, R and Nirdosh, I and Jayalakshmi, R (2006) Structure-Activity (Flotation) Relationship Modeling of Flotation of Sphalerite by N-Arylhydroxamic Acids. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Subramanian, N N and Rao, P Dharma and Narayanan, P I A (1957) Importance of Microscopic Studies in Mineral Dressing. In: Symposium on Mineral Beneficiation and Extractive Metallurgical Techniques, Feb. 1957, NML, Jamshedpur.

Sukharnikov, Yu I and Yefremova, S V and Zharmenov, A A (2010) Some advanced materials from the rice processing waste and their application in various branches of industry and agriculture. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Surabhi, and Udayabhanu, G and Suresh, N (2006) Characterization of Unburnt Carbon Recovered from Fly Ash by Froth Flotation. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Suresh, A and Ray, T and Dash, Pratik S. and Banerjee, P K (2010) Coke property prediction from coal blend properties using ANFIS model. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Surkov, G and Golovko, A K and Lomovsky, O I and Lobanov, J S (2011) Mechanochemical conversion of acetylene in quartz – ultrafine metal powder system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Sutaone, A T and Aehdi, R S and Barthwal, Y M and Gundewar, C S (2006) Beneficiation Studies on Cobalt Bearing Ore from Africa. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Sutaone, A T and Ghosh, S K and Raju, K S (2000) Recovery of MnO2, values from fine dumps of Dongri Buzurg Mine of M/s. MOIL. In: International Symposium on Processing of fines - Vol.2. NML Jamshedpur, Jamshedpur, pp. 409-415. ISBN 81-87053-53-4

Swain, Ranjita and Rao, R Bhima (2010) Leaching kinetics for iron from partially laterised khondalite rocks by hydrochloric acid solution. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Swain, Ranjita and Sahoo, A K and Rao, R Bhima (2006) Influence of the Static Screen Inclination on the Effect-ive Separating Size and Concentration of Beach Sand Minerals. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

T

Tammishetti, V and Rai, B and Ravi Kumar, B and Kumar, Rakesh and Pradip, (2016) Quantitative Estimation of Mineral Phases from Chemical Assays and Powder X-Ray Diffraction Rietveld Analysis: A Case Study on Selective Flocculation of Iron Ore Slimes. Transaction of the Indian Institute Metals, 69(1) (IF-0.533). pp. 125-133.

Tamotia, S K (2000) Management of Red Mud. In: International Symposium on Processing of fines - Vol.2. NML Jamshedpur, Jamshedpur, pp. 430-434. ISBN 81-87053-53-4

Tamrakar, P K and Prajapati, D and Sarangi, A K (2010) Study of leaching characteristics on low grade uranium ore of bagjata mine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Tarnekar, G G and Kohad , V P (2000) Application of column flotation technology for reduction of silica in zinc concentrate at Rajpura -Dariba mines, India. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 175-187. ISBN 81-87053-53-4

Tarnekar, G G and Ravindranath, K (1997) Recovery of Economic Minerals from Graphite Float of Rajpura Dariba mines. In: Proceedings of the National Seminar on Processing of Fines. NML Jamshedpur, Jamshedpur, pp. 57-63. ISBN 81-87053-25-9

Tathavadkar, V and Kari, Chandrakala and Rao, S Mohan (2006) Oxidation of Indian Ilmenite: Thermodynamics and Kinetics Considerations. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Tathavadkar, V and Singh, Virendra and Rao, S Mohan (2006) Study of Liquid Phase Formation during the Sintering of Chromite Pellets and its Effect on the Properties of Pellets. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Tcherdyntsev, V V and Kaloshkin, S D and Sudarchikov, V A and Dorofeev, A A and Mochkina, I V and Yuryeva, N V and Danilov, V D (2011) Ball milling effect on the properties of ultra high molecular weight Polyethylene - bronze composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Shevchukov, A P and Sviridova, T A and Kaloshkin, S D (2011) Phase transformations in mechanically alloyed Al-Cu-Cr powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Titova, V Yu and Kaloshkin, S D and Baldokhin, Yu V and Zagainov, A V and Rodin, A O (2011) Structure and magnetic properties of mechanically alloyed Fe3-xAlCrx powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Thella, John Samuel and Mukherjee, Asim Kumar and Rajshekhar, Y (2010) Recovering iron values from iron ore slimes using cationic and anionic collectors. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Thirugnanam, A and Chakravarthi, N. Veera and Chakkingal, Uday and Kumar, T S Sampath (2011) Novel titanium - hydroxyapatite biocomposites By mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME2008), 1-4 December, 2008, CSIR-NML, Jamshedpur.

Thomas, Jayasree and Riyazulla, M S and Subramanian, S and Haran, N P and Gundewar, C S (2006) Mineralogical and Electron Microprobe Studies on the Cobalt Sample from Kalyadi Copper Deposit, Hassan District, Karnataka. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Tichit, Didier and Das, N N and Coq, Bernard and Durand, Robert (2002) Preparation of Zr-containing layered double hydroxides and characterization of the acido-basic properties of their mixed oxides. Chemistry of Materials, 14 (4). pp. 1530-1538.

Tiwary, S N and Tripathi, P S M (2010) Effect of variation of moisture content of Hariajam coal on its electrical resistivity. Journal of Metallurgy and Materials Science, 52 (3). pp. 239-245.

Tripathi, Avinash and Agrawal, Ashish and Gupta, V K (2010) Development of a mathematical model for simulation of coal crushing in a Hammer mill. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Tripathy, A K and Koria, S C and Saxena, M N (1973) Preparation of Pre-Reduced Briquettes and Studies on the Kinetics of the Process Under Reduced Pressure. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Tripathy, Sunil Kumar and Ramamurthy, Y and Sahu, G P and Panda, Lopamudra and Singh, Virendra and Tathavadkar, V (2010) Influence of shaking table process parameters on concentration of chromite plant tailings. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Tripathy, Sunil Kumar and Ramamurthy, Y and Sahu, G P and Tathavadkar, V (2010) Ultra fine chromite concentration using spiral concentrator. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Tripathy, T and Pandey, S R and Karmakar, N C and Bhagat, R P and Singh, R P (1999) Novel flocculating agent based on sodium alginate and acrylamide. European Polymer Journal . pp. 2057-2072.

Tsuji, Yutaka (2006) Discrete Particle Simulation of Dense Phase Particle-Gas Flows. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Turianicová, Erika and Baláž, Peter (2011) A possible way to storage carbon dioxide on mechanically activated olivine (Mg,Fe)2SiO4. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

U

Umadevi, T and Kumar, Abhishek and Umashanker, A and Sah, Rameshwar and Marutiram, K (2019) Performance evaluation of a laboratory floatex density separator and its comparison with a spiral concentrator. Mineral Processing and Extractive Metallurgy (Trans. IMM), Online . pp. 1-8.

Umadevi, T and Rao, S Rakesh and Roy, Pankaj and Mahapatra, P C (2010) Influence of LD slag on iron ore sinter properties and productivity. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

V

Vaish, A K and Goswami, N G and Biswas, P K and Minz, R K and Humane, M M and Sivaramakrishnan, C S and Ramachandrarao, P (1999) Ancient iron making in India-historical perspective, technological aspects and future prospects. NML Technical Journal, 40 (4). pp. 183-194.

Vaish, A K and Humane, M M and Minz, R K and Chakravarti, A K and Ramachandrarao, P (1999) Rare earth metals addition to low carbon steel-thermodynamic aspects, process considerations and effect on mechanical properties. NML Technical Journal, 40 (3). pp. 85-125.

Vaish, A K and Nayak, B and Goswami, M C and Singh, S D and Singh, D P and Gupta, R C (2010) Magnetite ore of nagaland—its mineralogy and reduction kinetics. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Vaish, A K and Singh, S D and Minj, R K and Chishi, H K and Gupta, R C (2010) Prospects of Nickel—Chromium—Cobalt Bearing Magnetite Ore Deposit of Nagaland. IIM Metal News, 13 (4). pp. 17-22.

Vanangamudi, M (1989) Coal Preparation. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, balaipanda, Puri.

Vasumathi, N and Ananda Rao, M and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2016) Feasibility studies on Talc beneficiation by flotation. In: 15th International Seminar on Mineral Processing Technology. Springer, held at Pune.

Vasumathi, N and Sai Kumar, M and Vijaya Kumar, T V and Gopalkrishna, S J (2022) Extraction and Flotation Performance Evaluation of Bio-collector in High Ash Graphite Ore Beneficiation. In: Abstracts of the International Chemical Engineering Conference 2021: 100 Glorious Years of Chemical Engineering & Technology” (ICheEC2021), September 17-19, 2021, Online.

Vasumathi, N and Sowmya, D and Sai Kumar, M and Vijaya Kumar, T V and Goapala Krishna, S J Extraction and flotation performance evaluation of bio-collector in high ash graphite ore beneficiation. In: International Chemical Engineering Conference 2021 , September 16-19, 2021, NIT Jalandhar Punjab. (Submitted)

Vasumathi, N and Vijaya Kumar, T V and Nayak, B and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2014) Beneficiation of low grade graphite ore of eastern India by two-stage grinding and flotation. Journal of Mining and Metallurgy Section A Mining, 50 A (1) . pp. 9-17.

Vasumathi, N and Vijaya Kumar, T V and Rao, D S and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2010) Quality improvement of garnet and quartz by environment friendly natural surfactant. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Vasumathi, N and Vijaya Kumar, T V and Ratchambhigai, S and Subba Rao, S and Bhaskar Raju, G (2015) Flotation studies on low grade graphite ore from Eastern India. International Journal of Mining Science and Technology, 25(3) . pp. 415-420.

Vasumathi, N and Vijaya Kumar, T V and Ratchambhigai, S and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G and Shivakumar, S and Uma, Raman (2013) Single reagent for graphite flotation. In: XIII International Seminar on Mineral Processing Technology (MPT 2013), 11 to 13 December 2013, CSIR-IMMT, Bbubaneswar.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S (2018) Flotation of iron ore washing plant tailings. In: National Conference on Waste to wealth in mining and metallurgical Industries (WWMMI 2018). IMMT Bhubaneswar.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2013) Column flotation technology for the beneficiation of coking and non-coking coal fines. In: National seminar on Coal Preparation Technology, CPT-2013, CSIR-CIMFR, Dhanbad, 22 -23 Feb 2013, CSIR-CIMFR, Dhanbad.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2012) Recovery of values from tailing ponds of iron ore washing plants. In: International Mineral Processing Congress (IMPC - 2012), 24 - 28 September 2012, New Delhi, India.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2016) Removal of lead from waste material containing carbon. In: 20th National Conference on Non-ferrous minerals and metals, 8-9 July 2016, Jamshedpur.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G and Prasad, Kopparthi (2015) Pilot scale column flotation studies on the beneficiation of coal fines. In: International seminar on Mineral Processing Technology, (MPT 2014) in Andhra University, 12-14 March 2015, Andhra University, Vishakapatnam, Andhra Pradesh..

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G and Shivakumar, S and Raman, Uma (2013) Single reagent for coal flotation. In: National Conference on Coal Preparation Technology 2013, 22-23 Feb 2013, CSIR-CIMFR, Dhanbad.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G and Shivakumar, S and Uma, Raman (2013) Eco Friendly and Cost-Effective Reagent for Coal Flotation. International Journal of Engineering Research, 2(7) (IF-0.421). pp. 418-423.

Venkadesh, M and Madhira, Sai K and Vasumathi, N and Hemalatha, T and Vijaya Kumar, T V Utilization of limestone mineral wastes for developing self-compacting micro concrete. In: International Chemical Engineering Conference 2021 , September 17 to 19, 2021, NIT Jalandhar. (Submitted)

Venkatesan, S and Sahoo, K C and Barpanda, S (1985) Fines Generation in Kiln Process of Direct Reduction. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Verma, M N P and Dutt, Ashimesh and Rao, G N and Kumar, Rajendra (1975) Manufacture of soil pipe castings to export specification. NML Technical Journal, 17 (1-2). pp. 15-20.

Vidyadhar, A (2016) A Review of Technology of Metal Recovery from Electronic Waste. In: E-Waste in Transition - From Pollution to Resource. InTech, Croatia, pp. 121-158. ISBN ISBN 978-953-51-2500-6

Vidyadhar, A (2007) Role of Mixed Collector Systems in Selective Separation of Albite from Greek Stefania Feldspar Ore. In: International Seminar on Mineral Processing Technology (MPT-2007), February 22-24, 2007, Indian Institute of Technology, Bombay.

Vidyadhar, A and D, Renuka and Sharma, Mamta and Das, Avimanyu (2013) Beneficiation of High Ash Non-Coking Coal from Vasundhra Mines, Odisha. In: Twenty-sixth National convention of Metallurgical and Materials Engineers & National seminar on "Exploitation of Lean Grade Ore, Ore Fines and Urban Ores: Challenges, Problems and Solutions, 22-23 January, 2013, CSIR - National Metallurgical Laboratory.

Vidyadhar, A and Das, Avimanyu (2013) Enrichment implication of froth flotation kinetics in the separation and recovery of metal values from printed circuit boards. Separation and Purification Technology, 118 (IF-3.065). pp. 305-312.

Vidyadhar, A and Das, Avimanyu and Bhattacharyya, K K and Rao, K Hanumantha (2008) Adsorption Mechanism of Mixed Long-chain Amines and Alcohols on Silicate Minerals. In: 11th International Mineral Processing Symposium, 21-23 October 2008, Belek-Antalya, Turkey.

Vidyadhar, A and Das, Avimanyu and Rao, K Hanumantha (2008) Adsorption Mechanism of Longchain Alkylamines on Quartz and Albite. In: International Seminar on Mineral Processing Technology (MPT-2008) , April 22-24, 2008, Trivandrum,INDIA.

Vidyadhar, A and Dash, Rojalin and Sharma, Mamta and Andavarapu, Mohana Rao (2019) Beneficiation and Development of Process Flowsheet of High Ash Non-Coking Coal from Talcher Coalfield, Odisha. In: XVIII Conference on Mineral Processing Technology 2019 (MPT-2019) , 16-18 December, 2019, Hotel Marigold, Begumpet, Hyderabad.

Vidyadhar, A and Kumar, Vinod and Makhija, Dilip (2017) Reduction of phosphorous content in LD slag through spiral concentrator for industrial utilization. In: XVI International Seminar on Mineral Processing Technology 2017, 1-3 February, 2017, Mahabalipuram, Chennai.

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2014) Adsorption Mechanism of Mixed Cationic/Anionic Collectors in Quartz-Hematite Flotation System. Mineral Processing and Extractive Metallurgy Review: An International Journal, 35(2) (IF-0.690). pp. 117-125.

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2012) Adsorption mechanism of mixed collector systems on hematite flotation. Minerals Engineering, 26 . pp. 102-104.

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2011) Role of Mixed Cationic/Anionic Collector Systems on Hematite Flotation. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India.

Vidyadhar, A and Kumari, Neha and Sharma, Mamta and Singh, Ratnakar and Das, Avimanyu (2013) Beneficiation of Non-Coking Coal for Generating Low Ash Clean Coal. In: Recent Trends & Future Needs in Coal Preparation (CPT - 2013), 22-23 February, 2013, CSIR-CIMFR, Digwadih campus, Dhanbad.

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2012) Flotation Of Quartz And Hematite: Adsorption Mechanism Of Mixed Cationic/Anionic Collector Systems. In: XXIV International Mineral Processing Congress (IMPC) 2012, September 24-28, 2012, Hotel Ashok, Diplomatic Enclave, New Delhi.

Vidyadhar, A and Renuka, D and Sharma, Mamta (2013) High Ash Non-Coking Coal from India: Beneficiation and Implications. In: Proceedings of the XIII International Seminar on Mineral Processing Technology (MPT-2013), 10-12 December, 2013, IMMT, Bhubaneswar.

Vidyadhar, A and Singh, A K and Srivastava, A and Nayak, B and Rao, K V and Das, Avimanyu (2010) Beneficiation of banded hematite quartzite from meghatuburu mine, eastern India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Vidyadhar, A and Singh, Ratnakar (2007) Froth Flotation and its Application to Concentration of Low Grade Iron Ores. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Vidyadhar, A and Srivastava, A and Singh, R K and Nayak, B and Rao, K V and Das, Avimanyu and Bhattacharyya, K K (2011) Development of Processing Technology for Beneficiation of Lean Iron Ore Fines from GOA. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Vidyadhar, A and Vaishanau, V S and Das, Avimanyu (2009) Optimization of Process Parameters for Flowing Film Concentration of Ground Printed Circuit Boards. In: International Seminar on Mineral Processing Technology (MPT-2009), Oct 28-30, 2009, IMMT, Bhubaneshwar.

Vijaya Kumar, T V and Gopalakrishna, S J (2013) Laboratory Column flotation studies for reduction of alumina and silica in iron ore slimes of an operating plant. Proceedings of the XIII International Seminar on Mineral Processing Technology (MPT – 2013) , 2 . pp. 406-415.

Vijaya Kumar, T V and Gopalakrishna, S J (2014) Optimization of flotation process for reduction of alumina and silica from screw classifier overflow of an iron ore washing plant. International Journal of Engineering Research, 3/1 (IF-0.421). pp. 1-5.

Vijaya Kumar, T V and Gopalakrishna, S J (2013) Selection of cationic collector for reduction of alumina and silica in iron ore slimes of an operating plant by flotation. International Journal of Engineering Sciences & Research Technology, 2/11 (IF-1.852 (International Society for Research Activity - ISRA)). pp. 3295-3302.

Vijaya Kumar, T V and Prabhakar, S and Bhaskar Raju, G and Rao, D S and Subba Rao, S and More, P (2005) Semicommercial scale studies using flotation column and dual extraction column on iron ores of Goa, India. Journal of Minerals and Materials characterization and Engineering, 4 (2). pp. 113-124.

Vijaya Kumar, T V and Rao, D S and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2010) Cleaner production of garnet sand for environmental abatement. The Pacific Journal of Science and Technology , 11 (2). pp. 585-591.

Vijaya Kumar, T V and Rao, D S and Gopalakrishna, S J (2011) Mineralogical and separation characteristics of iron ore fines from Bellary – Hospet, India with special emphasis on beneficiation by flotation. Journal of Mining and Metallurgy, 47A (1). pp. 39-49.

Vijaya Kumar, T V and Rao, D S and Rao, S Subba and Bhaskar Raju, G and Prabhakar, S (2005) Beneficiation of a Low Grade Limestone by Flotation Column. In: International Seminar on Mineral Processing Technology(MPT-2005), January 6-8, 2005, Indian School of Mines, Dhanbad.

Vijaya Kumar, T V and Rao, D S and Rao, S Subba and Prabhakar, S and Bhaskar Raju, G (2006) Value Addition of Indian Iron Ore Fines by Column Flotation - Few Case Studies. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Vijaya Kumar, T V and Rao, D S and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2010) Reverse flotation studies on an Indian low-grade iron ore slimes. International Journal of Engineering Science and Technology, 2 (4). pp. 637-648.

Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Shivakumar, S and Raman, Uma (2010) Development, testing and plant trails of single reagent system for coal flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Vijaya Kumar, T V and Vasumathi, N and Ajita, Kumari (2019) Indigenization and development of column flotation technology at CSIR- NML Madras Centre. In: XVIII Conference on Mineral Processing Technology 2019 (MPT-2019) , 16-18 December, 2019, Hotel Marigold, Begumpet, Hyderabad.

Vijaya Kumar, T V and Vasumathi, N and Ananda Rao, M and Subba Rao, S and Shivakumar, S (2017) Development of environmental friendly single reagent for coal flotation. In: Nexcen Tech nologies for Mining andFuelndustries (NxGnMiFu-20 17), Volume II, February 15-17,2017 New Delhi, India. Allied Publishers Pvt Ltd, New Delhi, pp. 1475-1480.

Vijaya Kumar, T V and Vasumathi, N and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2013) Recovery of ultrafine iron values from tailing pond of iron ore washing plants. The Indian Mineralogist, 1-2 . pp. 83-92.

Vijaya Kumar , T V and Prabhakar, S and Bhaskar Raju, G (2001) Interaction of Oleate Molecules on Sillimanite and Garnet minerals. In: Advances in surface science and engineering, 21-23 February, 2001, Chennai.

Vijaya Kumar , T V and Rao, D S and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2006) Processing of iron ore fines by column flotation – Part I & part II. Minerals & Metals Review, June . pp. 48-51.

Vishwamohan, K and Rajgopal, K and Dwivedy, K K and Jayaram, K M V (1985) Beneficiation of Manganese Ore Fines for the Production of Battery Grade MnO2. In: Proceedings of Nationa Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur.

Vishwamohan, K and Shivananda, S R and Dwivedy, K K (1985) Wet High Intensity Magnetic Seperation of some Uranium Ores of India. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur.

Vishwanath, U and Prasad, K S and Joshi, A (2006) Geo-Metallurgical Studies of Rampura Agucha Deposit. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Visnyovszky, L (1973) Solid Carbon - The Most Effective Reducing Agent. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Vohra, D K and Sharma, A (1997) Solvent extraction studies of Cu(II) with benzoyl acetone. NML Technical Journal, 39 (4). pp. 209-220.

W

Welham, N J and Setoudeh, N (2011) Increasing gas sorption onto carbon by milling with alumina. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Wenzel, W and Meraikib, M and Speich, P and Franke, F H (1973) Reducing Agents from Brown Coal for the Production of Sponge Iron. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur.

Wetter, Martin and Bandopadyay, Ketan (2010) Crushing solutions for rom sizing. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Williams, Richard A (2006) Improving the Design and Operational Efficiency of Mineral Processes using in-Situ Tomography. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Y

Yadav, T P and Mukhopadhyay, N K and Tiwari, R S and Srivastava, O N (2011) Mechanically induced phase transformation in Al-Cu- Fe-Cr decagonal Quasicrystalline alloy by high-energy ball milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Yadav, U S and Das, B K and Kumar, Ashok and Sandhu, H S (2002) Solid Wastes Recyling through Sinter-Status at Tata Steel. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Yariv, S and Lapides, I and Abramova, E (2011) Mechanochemical reactions of clay minerals with CsCl. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Yedavalli, B V S (1973) Economic viability of bacterial leaching-A management research viewpoint. NML Technical Journal, 15 (4). pp. 28-31.

Yenbayev, I A and Rudnev, B P and Shamin, A A (2000) Processing of Discard Tailings and Non-conventional raw Materials using efficient upgrading Processes. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 72-80. ISBN 81-87053-53-4

Yerriswamy, P and Modi, O P and Rao, K K and Rao, T C (2000) Characterization of Macerals in Coal Fines using Image Analysis Technique. In: International Symposium on Processing of fines. NML Jamshedpur, Jamshedpur, pp. 14-24. ISBN 81-87053-53-4

Yoon, Roe-Hoan (2006) Modeling Flotation from First Principles. In: Proceedings of the International Seminar on Mineral Processing Technology and Indo-Korean Workshop on Resource Recycling (MPT-2006), March 8-10, 2006, NML, Chennai.

Z

Zakharova, N A and Dosymbaeva, Z D and Koiyzhanova, A K and Suleimenov, E N and Beisembaeva, G Zh. (2010) Study of gold and silver leaching processes from sulfide ores. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Zarei Sahamieh, Reza and Pazoki, Amir and Rezaei, Peiman and Saket, Ali (2010) Petrological and geochemical characteristics of the Granitoid complex of astaneh, western Iran, from the point of beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Zhang, Yanjun and Zhao, Hongbo and Zhang, Yisheng and Qian, Lu and Zhang, Luyuan and Meng, Xiaoyu and Lv, Xin and Abhilash, and Janjua, Hussnain Ahned and Qiu, Guanzhou (2019) Interactions between marmatite and bornite during the oxidative dissolution process in abiotic and biotic systems. RSC Advances, 9 (IF-3.51). pp. 26609-26618.

Ziaja, Dieter and Saraswat, Nikhil and Ognyanova, Albena (2010) Beneficiation of indian iron ore lumps and fines by using underbed air–pulsated BATAC jigs. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.