| Login | Create Account | Upload Instructions |
Items where Subject is "Materials Science > Materials Charcterization"
Group by: Creators | Item Type Number of items at this level: 611.
AAdekunle , Adeleke and Jamiu , Odusote and Peter , Ikubanni and Olumuyiwa , Lasode and Madhurai , Malathi and Paswan, Dayanand (2021) Physical and mechanical characteristics of composite briquette from coal and pretreated wood fines. Int J Coal Sci Technol . Adeleke, A A and Odusote, J K and Lasode, O A and Ajani, O Lasode and Ikubanni, P P and Malathi, M and Paswan, Dayanand (2019) Mild pyrolytic treatment of Gmelina arborea for optimum energetic yields. Cogent Engineering, 6(1) . 1593073-1-13. Adhikary, M and Chakraborty, A and Das, A and Venugopalan, T and Kumar, B R (2019) Influence of annealing texture on dynamic tensile deformation characteristics of Dual phase steel (vol 736, pg 209, 2018). Materials Science and Engineering: A, 756 (IF-4.081). p. 312. Adhikary, M and Chakraborty, A and Das, A and Venugopalan, T and Ravi Kumar, B (2018) Influence of annealing texture on dynamic tensile deformation characteristics of Dual phase steel. Materials Science and Engineering: A , 736 (IF-4.081). pp. 209-218. Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2012) Mechanical Activation of Al-Oxyhydroxide Minerals – Physicochemical Changes, Reactivity and Relevance to Bayer Process. In: LIGHT METALS 2012. TMS (The Minerals, Metals and Materials Society), pp. 15-19. ISBN 978-1-11829-139-9 Aman, Noor and Das, N N and Mishra, T (2016) Effect of N-doping on visible light activity of TiO2–SiO2 mixed oxide photocatalysts. Journal of Environmental Chemical Engineering, 4 (IF-1.355). pp. 191-196. Arif, S M and Ghorai, S and Bar, H N and Mandal, D (2022) Effect of quenching and partitioning time on microstructure and mechanical properties of low carbon micro-alloyed steel. In: Symposium on Failure and Preventive Maintenance of Machineries (FPMM), March 08-09, 2022, Durgapur, India. Arora, R C (1967) Moulding characteristics of BTL-9 Sand sample received from Punjab State Industries Department, Chandigarh. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C (1967) Moulding Characteristics of Sand Samples No. GSP-3. received from Department of Industry, Govt. of Punjab. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Arora, R C and Bhandary, V S and Gupte, P K (1965) Investigation on MP33 Bentonite supplied by Messrs Ambica Minechem Industries, Bhavnagar. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Bhandary, V S and Gupte, P K (1966) Moulding Characteristics of Amgonder Sand received from Director, Directorate of Geology and Mining ,Lucknow ,U.P. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Bhandary, V S and Gupte, P K (1965) Moulding characteristics of Hardwar River Sand supplied by M/s. Bharat Heavy Electricals Ltd.,Hardwar. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Bhandary, V S and Gupte, P K (1965) Moulding characteristics of Kandleru River Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Bhandary, V S and Gupte, P K (1966) Moulding characteristics of Maharashtra Sand sample No. MSS-1. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Singh, Autar (1966) Moulding characteristics of Sand No. BTL- 2(natural moulding sand )received from Punjab State Industries Department, Chandigarh. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Singh, Autar (1967) Moulding Characteristics of Sand Sample No-BTL-5 (Natural moulding sand) received from Punjab State Industries Department, Chandigarh. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Singh, Autar (1967) Moulding Characteristics of Sand Sample No. GSP-A received from Punjab State Industries Department, Chandigarh. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Singh, Autar (1966) Moulding Characteristics of Sand Sample No.BTL-3 (Natural Moulding Sand) received from Punjab State Industries Department, Chandigarh. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Singh, Avtar (1967) Moulding Characteristics of Sand Sample No-BTL-17. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Singh, Avtar (1967) Moulding Characteristics of Sand sample No.BTL-12(Natural moulding sand). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R C and Verma, M N P (1968) Moulding Characteristics of Sand Sample No.GSP-4 Received From Punjab State Industries Department, Chandigarh. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Arora, R C and Verma, M N P (1970) Moulding characteristics of sand sample no. GSP-19 (Natural Moulding Sand) received from the Department of Industries, Govt. of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding characteristics of Sand sample No. BTL-14 (Natural Moulding Sand) received from the Department of Industries, Govt. of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding characteristics of sand sample no. BTL-18 (Natural Moulding Sand) received from the Department of Industries, Government of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding Characteristics of Sand Sample No. BTL-19 (Natural Moulding Sand) received from Department of Industries, Govt. of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding characteristics of sand sample no. BTL-8 received from the Department of Industries, Government of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding characteristics of sand sample no. GSP-14(Natural Moulding Sand)received from the Department of Industries, Government of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding characteristics of Sand sample No. KS-6 received from the Department of Industries, Govt. of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding characteristics of Sand sample No. KS-7 received from the Department of Industries, Govt. of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding characteristics of sand sample no.BTL-15(Natural Moulding Sand) received from the Department of Industries, Govt. of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding characteristics of sand sample no.BTL-16 (Natural Moulding Sand) received from the Department of Industries, Government of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding characteristics of Sand sample no.GSP-16 received from the Department of Industries, Govt. of Punjab. Other (TMP). CSIR-NML, Jamshedpur. Arora, R C and Verma, M N P and Rao, G N (1970) Moulding Characteristics of the Sand Sample No. KSS-1. Other (TMP). CSIR-NML, Jamshedpur. Arora, R.C and Bhandary, V S and Gupte, P K (1965) Investigation on PHG Bentonite supplied by Messrs Ambica Minechem Industries, Bhavnagar, Gujarat. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Arora, R.C and Singh, Autar (1967) Moulding Characteristics of Sand sample No.BTL-10. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Ashiq, Md and Pushkar, Dhekne and Hamada, Atef Saad and Sahu, Puspendu and Mahato, B and Minz, R K and Ghosh Chowdhury, S and Karjalainen, L P (2017) Correlation of Microstructure and Texture in a Two-Phase High-Mn Twinning-Induced Plasticity Steel During Cold Rolling. Metallurgical and Materials Transactions A, 48(10) (I F-1.874). pp. 4842-4856. BBagui, S and Sahu, B P and Laha, K and Tarafder, Soumitra and Mitra, R (2021) Creep Deformation Behavior of Inconel 617 Alloy in the Temperature Range of 650 degrees C to 800 degrees C. Metallurgical and materials transactions A-physical metallurgy and materials science, 52(1) . pp. 94-107. Bagui, S and Sahu, B P and Mahato, B and Mandal, M and Tarafder, Soumitra and Mitra, R (2022) Effect of Microstructural Evolution on Creep and Rupture Behavior of Inconel 617 Alloy. Journal of Materials Engineering and Performance . Bagui, Sumanta and Mandal, M and Sahoo, Biraj K and Laha, K and Tarafder, Soumitra and Mitra, R (2022) Investigation of non-classical creep behavior of Inconel 617 alloy at 700 degrees C and 800 degrees C through interrupted tests and microstructural characterizations. Materials Science and Engineering A, 832 . Bakshi, S Das and Sinha, D and Ghosh Chowdhury, S and Mahashabde, V V (2018) Anisotropic broadening of XRD peaks of α′-Fe: Williamson-Hall and Warren-Averbach analysis using full width at half maximum (FWHM) and integral breadth (IB). Materials Characterization, 142 (IF-3.220). pp. 144-153. Balasankar, K K and Beck, T A and Somayajulu, B V and Bhatnagar, S S (1960) Moulding characteristics of facing and backing sands received from M/S Southern Railway, Golden Rock, Madras. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Balasankar, K K and Beck, T A and Somayajulu, B V and Bhatnagar, S S (1960) Moulding characteristics of facing and backing sands received from M/s Southern Railway, Golden Rock , Madras. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Balasankar, K.K and Mohan, Jatinder and Bhatnagar, S S (1961) Investigation on Sabarmathy River Sands supplied by M/s Machinery and Equipment Manufacturers Private Ltd., Ahmadabad. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Balasankar, K.K and Mohan, Jatinder and Bhatnagar, S S (1961) Moulding characteristics of moulding sand received from Southern Railway Workshops, Mysore. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Balasubramanian, Krishnan (2011) NDE Tools for process and product monitoring in manufacturing. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Balusamy, T and Satendra, Kumar and Sankara Narayanan, T S N (2010) Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel. Corrosion Science, 52 . pp. 3826-3834. Balusamy, T and Satendra , Kumar and Sankara Narayanan, T S N (2011) Electrochemical behaviour of surface modified AISI 304 grade stainless steel in ringer’s solution. Transactions of the Indian Institute of Metals, 64 (4-5). pp. 507-511. Banerjee, A and Sahu, J K and Paulose, N and Fernando, C D and Ghosh, R N (2016) Micromechanism of cyclic plastic deformation of alloy IN 718 at 600°C. Fatigue & Fracture Of Engineering Materials And Structures, 39(7) (IF-2.335). pp. 877-885. Banerjee, Riya and Chakladar, S and Chattopadhyay, S K and Chakravarty, S (2023) Leaching of rare earth elements from coal ash using low molecular weight organocarboxylic acids: Complexation overview and kinetic evaluation. International Journal of Chemical Kinetics . Banerjee, Riya and Chakladar, S and Mohanty, Ashok and Chattopadhyay, S K and Kumar, S and Chakravarty, S (2022) Leaching characteristics of rare earth elements from coal ash using organosulphonic acids. Minerals Engineering, 185 . Banerjee, S K and Narayanan, P I A (1959) Recovery of Metallics from low grade Aluminium powder from M/s. Devidayal Metal Industries (Private) Limited. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Banerjee, S K and Sengupta, B L and Narayanan, P I A (1960) Screen analysis and Chemical analysis of Iron ore sample from Kiriburu. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Banerjee, T (1954) Electrolytic alloys: Part -II Industrial alloy plating. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Banerjee, T (1954) Electrolytic alloys: Part I- Structure of alloys, Electrodeposited at constant potential. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Baral, J and Swaminathan, J and Chakrabarti, D and Ghosh, R N (2017) Effect of welding on creep damage evolution in P91B steel. Journal of Nuclear Materials, 490 (IF-2.048). pp. 333-343. Barat, K and Das, Goutam and Bharathy, S and Ghosh, M (2019) Compositional Optimization of a Commercially Produced Ferritic Steel Using Microstructural Heterogeneity and Mechanical Properties. Materials Performance & Characterization . Barat, K and Sivaprasad, S and Kar, S and Tarafder, S (2018) Creep Fatigue Interaction under Different Test Variables: Mechanics and Mechanisms. Journal of Testing and Evaluation (IF-0.389). pp. 1-20. Barat, Kaustav and Metya, Avijit Kumar and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2014) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204. Bask, T.A. and Mohan, Jatinder and Gupta, P K (1960) Investigation on the moulding characteristics of river sand sent by Southern Railway Workshops, Golden rock, Madras. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Baskaran, Irusen (2007) Preparation and characterization of Nanocrystalline nickel based alloy deposits. PhD thesis, University of Madras. Baskaran, Irusen and Sakthi Kumar, R and Sankara Narayanan, T S N and Stephen, A (2006) Formation of electroless Ni–B coatings using low temperature bath and evaluation of their characteristic properties. Surface and Coatings Technology, 200 (24). pp. 6888-6894. Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2006) Effect of accelerators and stabilizers on the formation and characteristics of electroless Ni–P deposits. Materials Chemistry and Physics, 99 (1). pp. 117-126. Basu, T S and Ray, Mallar and Bandopadhyay, N R and Pramanick, A K and Hossain, S M (2013) Performance Enhancement of Crystalline Silicon Solar Cells by Coating with Luminescent Silicon Nanostructures. Journal of Electronic materials, 42(3) (IF-1.9). pp. 403-409. Beck, T A and Bandary, V S and Gupte, P K (1963) Investigation on Cutch Bentonite received from M/s Mukund Iron & Steel works Limited Kurla, Bombay. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Beck, T A and Bhandary, V S and Gupte, P K (1968) Suitability of Yellow Dextrine as a Core Binder. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Beck, T A and Bhatnagar, S S (1961) Investigation on the moulding characteristics of Silica sand moulding sand and bonding clay sent by M/S Britania Engg. Co, Ltd. Titaghur, W.Bengal. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Beck, T A and Bhatnagar, S S and Gupta, P K (1961) Investigation on the core properties of "Londha yellow fine core sand from M/S Kirloskar Bros. Kirloskarvadi, Bombay-7. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Beck, T A and Mohan, Jatinder and Gupte, P K (1959) Investigation of ‘Bhawanagar Moulding Sand’ supplied by M/s Vishnu Cotton Mills (Private) Ltd., Sholarpur. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Beck, T A and Mohan, Jatinder and Gupte, P K (1960) Investigation on the moulding characteristics of river sand by Southern Railway Workshop, Golden Rock Madras. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Beck, T A and Mohan, Jatinder and Gupte, P K (1959) Investigation on Zircon Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Berg, Frenk van den and Yang, Haibing (2011) Real-time Meniscus Level and Slag Thickness Measurement by RADAR. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Berg, Frenk van den and Yang, Haibing (2011) Real-time Meniscus Level and Slag Thickness Measurement by RADAR. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Bhatnagar, P P and Subramanian, M and Ganguly, R G and Subrahmanyam, N and Yedavalli, B V S and Bhoray, S S (1970) Production of high carbon ferromanganese using low-temperature carbonization coke Katkona Colliers of Madhya Pradesh. Other (TMP). CSIR-NML, Jamshedpur. Bhattacharya, Ankita and Biswal, S and Barik, R K and Mahato, B and Ghosh, M and Mitra, Rahul and Chakrabarti, Debalay (2024) Comparative interplay of C and Mn on austenite stabilization and low temperature impact toughness of low C medium Mn steels. Materials Characterization, 208 . Bhattacharya, Ankita and Karmakar, Anish and Karani, Arnab and Ghosh, M and Chakraborty, D (2019) Processing of Ultrafine-Grained Steels by Warm Rolling and Annealing. Journal of Materials Engineering and Performance, 28(2) (IF-1.476). pp. 753-768. Bose, Debabrata (2013) Development of a Non-Invasive Technique Based on Infra-red Thermography to Detect and Estimate Iron in Galvannealed Coatings. Masters thesis, Bengal Engineering College and University, Shibpur. Bose , A K and Prasad, T V (1966) Investigation on Emery flour. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. CChakladar, S and Vishwakarma, Dhiraj and Patar, Prasanjeet and Mohanty, Ashok and Chakravarty, S and Patra, Chiranjib (2022) Effect of surfactant, ionic strength, mineralogical composition, and surface morphology on zeta potential of bituminous coals of Indian origin. International Journal of Coal Preparation and Utilization . Chakrabarty, A and Chakrabarty, P and Jain, R and Sahu, V K and Gurao, N P and Bar, H N and Khutia, N (2023) Influence of Scanning and Building Strategies on the Deformation Behavior of Additively Manufactured AlSi10Mg: CPFEM and Finite Element Studies. Metals and Materials International . Chakrabarty, A and Sahu, R and Kumar, A and Bar, H N and Hitzler, L and Khutia, N (2023) Finite element evaluation of fracture toughness and crack propagation in LB-PBF AlSi10Mg. Continuum Mechanics and Thermodynamics, 35(2) . pp. 677-697. Chakrabarty, A and Sahu, V K and Das, Anindya and Mukherjee, Shreya and Gurao, N P and Chakraborty, P and Bar, H N and Khutia, N (2021) Study of the Effect of Two Separate Tilt Angles of Laser Scanning Lines on the Microstructure and Mechanical Properties in Direct Metal Laser Sintered AlSi10Mg Alloy. Metals and Materials International . Chakraborty , G and Pal, T K and Palit Sagar, S and Parida , N (2011) Non Destructive Characterization Of Resistance Spot Welded Joints By Ultrasonic Technique. Indian Welding Journal, 44 (1). pp. 30-36. Chakravarty, S and Chakravarty, K and Mishra, V and Chakladar, S and Mohanty, Ashok and Sharma, Mamta (2020) Characterization of Chemical Structure with Relative Density of Three Different Ranks of Coal from India. Natural Resources Research, 29(5) (IF-3.708). pp. 3121-3136. Chalavadi, G and Singh, R K (2021) Feasibility study of iron ore fines beneficiation by shallow bed air fluidized separator. Particulate science and technology, 39(4) (IF-1.619). pp. 391-400. Chandan, A K and Hung, P T and Kishore, K and Kawasaki, M and Chakraborty, J and Gubicza, Jeno (2021) On prominent TRIP effect and non-basal slip in a TWIP high entropy alloy during high-pressure torsion processing. Materials Characterization, 178 . Chandan, A K and Kishore, Kaushal and Hung, P T and Ghosh Chowdhury, S and Kawasaki, M and Gubicza, Jeno (2022) Effect of nickel addition on enhancing nano-structuring and suppressing TRIP effect in Fe40Mn40Co10Cr10 high entropy alloy during high-pressure torsion. International Journal of Plasticity, 150 . Chatterjee , Partha Pratim (2016) Recent developments in aerospace materials. Journal of Metallurgy and Materials Science, 58(2) (IF- 0.04). pp. 53-56. Chattoraj, I and Kumar, Anil and Das, Swapan K and Tarafder, Mita and Tarafder, Soumitra (2022) Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. International Journal of Materials Research, 94(11) . pp. 1228-1233. Chaudhary, C and Sahoo, K L and Mandal, D (2020) Processing and characterisation of modified strain-induced melt activation processed Al-Si alloys. Materials Science and Technology, 36(2) (IF-5.040). pp. 181-193. Chauhan, Gyanendra Pratap Singh (2012) Alloy synthesis and material characterization of Zr-Ti-Nb based alloys. Masters thesis, CSIR-NML . Chennakesavulu, K and Sreedevi, P and Raviatul Basaria, M and Ramanjaneya Reddy, G and Bhaskar Raju, G and Prabhakar, S and Sasipraba, T (2014) Thermal decomposition mechanism of p-tert-butyl-calix[n]arenes. Thermochimica Acta (2014) , 575 (IF-2.105). pp. 55-63. Chirayath , A T and Bandary, V S and Gupte, P K (1963) Investigation on the Madras Bentonite received from Fomes and Privates Limited, D-38, Industrial Estate Rajajinagar, Bangalore -10. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Chirayath , A T and Bhandary, V S and Gupte, P K (1963) Studies on the hot strength characteristics of some indigenous Bentonites. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Chirayath , A T and Bhatnagar, S S and Gupte, P K (1962) Investigation on the Bentonite samples received from Indian Standards Institution. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Chirayath , A T and Mohan, Jatinder and Bahandary, V S and Gupte, P K (1963) Investigation on the Australian Bentonite received from CSIRO, Melbourne, and Under the International Working Group on Bonding Clays. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Chirayath , A T and Mohan, Jatinder and Gupte, P K (1962) Investigation on the Bakudi Bentonite Santhal Pargans, (Bihar), supplied by Messrs Calcutta Mineral Supply Co., Pvt., Ltd. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Chirayath , A T and Mohan, Jatinder and Gupte, P K (1962) Investigation on the Rajula Bentonite received from Ambica Mine Chem. Industries Nari Road , Bhavnagar. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Chirayath , A T and Mohan, Jatinder and Gupte, P K (1962) Suitability of 'Hathi –Ki- Dhani' Bentonite as a binder for use in Foundries. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Choudhary, C and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Evaluation of microstructure and mechanical properties of M-SIMA processed Al-7Si alloy. Materials Science and Technology . Chowdhury, T (2014) Deformation and Fracture Behaviour of 20MnMoNi55 Pressure Vessel Steel. PhD thesis, Indian Institute of Engineering, Science and Technology, Shibpur (formerly Bengal Engineering and Science University, Shibpur). DDarji , S B and Zala , D M and Rajput, U P and Rao, V J and Vaish, A K (2019) Typical self-healing materials-their mechanism and emerging applications. Journal of Metallurgy and Materials Science, 61(3) . pp. 151-160. Darshit, R S and Bhavsar, S N (2019) Effect of Tool Nose Radius and Machining Parameters on Cutting Force, Cutting Temperature and Surface Roughness-An Experimental Study of Ti-6Al-4V (ELI). Journal of Metallurgy and Materials Science, 61(1) . pp. 25-37. Das, A and Bhandary, V S and Gupte, P K (1963) Moulding Characteristics of K.S. Sand (Kanhayasthan Hill Deposits). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, A and Kumar, B and Ahmad, Sheikh Nazir and Paul, S K and Mandal, G K (2021) Formability study of bake hardening steel and its correlation with microstructure. Proceedings of the Institute of Mechanical Engineers Part B-Journal of Engineering Manufacture . Das, A and Mohapatra, M and Basu, S (2020) Electrochemical application of shape and phase dependant copper sulphide for costeffective next generation supercapacitive energy storage: A review. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 95-102. Das, A R and Chowdhury, T and Sivaprasad, S and Bar, H N and Narasaiah, N and Tarafder, S (2016) Influence of dynamic strain ageing on fracture behaviour and stretch zone formation of a reactor pressure vessel steel. International Journal of Fracture, 202(1) (IF-2.247). pp. 79-91. Das, Amitava and Bhandary, V S and Gupte, P K (1966) Investigation on BS-Bentonite received from M/S Hargovindas Shivlal & Company, Bombay. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, Amitava and Bhandary, V S and Gupte, P K (1966) Investigation on BR-Bentonite received from M/S Hargovindas Shivlal & Company, Bombay. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, Amitava and Bhandary, V S and Gupte, P K (1963) Moulding and Core Characteristics of A.C.C. Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, Amitava and Bhandary, V S and Gupte, P K (1964) Moulding Characteristics of Gundiposi sand received from Geological Survey of India, Bihar Circle. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, Amitava and Dutt, Ashimesh (1968) Investigation on Ichhanagari Moulding Sand from Howrah District, West Bengal. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1966) Investigation on Moulding Characteristics of Sand from Tarakeswar, District Hooghly. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from Bagulia ,District Purulia , West Bengal. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from Andal, District Burdwan ,West Bengal. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from DumDumi, District Purulia. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from Ondal, District Burdwan. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, Amitava and Dutt, Ashimesh (1968) Investigation on Moulding Sand from Parbatipur District Purulia, West Bengal. Other (TMP). CSIR- NML, Jamshedpur. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from Sashpur, District Purulia. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from Shalgora, District Bankura, West Bengal. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from Sonori, District Purulia, West Bengal Part-III. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from Sonori, District Purulia, West Bengal : Part-II. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from Sonori, District Purulia, West Bengal Part-I. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from Sonori, District Purulia, West Bengal Part-IV. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sand from Upardih, District Purulia, West Bengal. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sands from Dubchururia, District, Burdwan, West Bengal. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1967) Investigation on Moulding Sands from Gopalmath, District Burdwan, West Bengal. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Amitava and Dutt, Ashimesh (1968) Investigation on Mundeswari River Sand from Harinkhola District Hooghly West Bengal. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Das, Anindya and Ghosh, M and Tarafder, S and Chakrabarti, D (2017) Micromechanisms of deformation in dual phase steels at high strain rates. Material Science and Engineering A Structural Materials Properties Microstructure and Processing, 680 (IF-3.094). pp. 249-258. Das, Arpan (2017) Resurgence of texture in cyclically deformed austenite. Materials Characterization, 123 (IF 2.714). pp. 315-327. Das, B N (1957) Report on Controlled friction material with a co-efficient of friction 0.10.12 initially which should not exceed 0.16 in service. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, B N and Banerjee, S K (1955) Temperature Dependence of Young’s Modules in Plan Carbon Steels. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, B N and Banerjee, S K and Bucknall, E H (1955) Effect of cyclic stress on Mechanical properties of Steels. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, B.N and Mitra, M.S (1951) Factors influencing young modulus of metals. Other (TMP). CSIR NML. Das, Bappaditya and Kundu, Rajen and Chakravarty, Sanchita (2022) Preparation and characterization of graphene oxide from coal. Materials Chemistry and Physics, 290 (4.778). p. 126597. Das, C R and Albert, S K and Swaminathan, J and Bhaduri, A K and Raj, B and Murty, B S (2012) Improvement in creep resistance Of modified 9Cr-1Mo steel weldment By boron addition. WELDING IN THE WORLD, 56 (07-08). pp. 10-17. Das, P C and Balasankar, K K and Saha, G L and Mohan, Jatinder and Gupte, P K (1960) Moulding and core characteristics of Batala sands received from M/s Batala Engineering Company Ltd., Punjab. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P C and Mohan, Jatinder (1958) Moulding characteristics of Gidni sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P C and Mohan, Jatinder (1958) Moulding Characteristics of medium Silica sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P C and Mohan, Jatinder (1958) Moulding characteristics of yellow moulding sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P C and Mohan, Jatinder and Gupte, P K (1959) Moulding characteristics and upgrading of Rajkot sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P C and Mohan, Jatinder and Gupte, P K (1959) Moulding characteristics of Durgapur Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P C and Mohan, Jatinder and Gupte, P K (1959) Moulding characteristics of Goriali and Jayadi moulding sands. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P C and Mohan, Jatinder and Gupte, P K (1959) Moulding characteristics of moulding sand from M/s P.W. Workshop, Gunter, Andhra Pradesh. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P C and Mohan, Jatinder and Gupte, P K (1959) Moulding characteristics of Silica sand from M/s B.P. Foundries, Kanpur. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P C and Mohan, Jatinder and Gupte, P K (1958) Moulding characteristics of Snow White Silica Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P C and Mohan, Jatinder and Gupte, P K (1959) Moulding characteristics of yellow sand from S.P. Foundries, Kanpur. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Das, P.C and Balasankar, K.K and Saha, G.L and Mohan , Jatinder and Gupta, P K (1960) Moulding and core characteristics of Batala sands. Other (TMP). CSIR NML. Das, S and Murugaiyan, Premkumar and Roy, Rajat K and Mahato, D K and Panda, Ashis K (2023) Impact of Bounding Media on the Attenuation Characteristics of Magnetostrictive Signal Obtained from Pipe Embedded in Soil and Sand. Journal of Nondestructive Evaluation, 42(3) . Das, T K and Dutta, Chandan and Kumar, Alok and Kadu , Satish and Palit Sagar, S (2020) Real-Time Parametric Evaluation ofWeld in Metallic Wires: A 3-D Simulation and Experimental Validation. Journal of Nondestructive Evaluation, 39(2) (IF-1.950). p. 35. Das Chakraborty, S and Kumar, U and Bhattacharya, P and Mishra, T (2024) Tailoring of Visible to Near-Infrared Active 2D MXene with Defect-Enriched Titania-Based Heterojunction Photocatalyst for Green H2 Generation. ACS Applied Materials & Interfaces, 16(2) . pp. 2204-2215. Dasgupta, A and Randhawa, N S and Chandrashekhar, S and Goyal, RP (2016) Filtration studies for separation of solid particles from slurry generated in hydrometallurgical processing of ores and concentrates. Journal of Metallurgy and Materials Science, 58(2) (IF-0.04). pp. 69-79. Dash, R R and Bhandary, V S and Gupte, P K (1966) Moulding characteristics of Maharashtra Silica sand (M.S.S.6). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Dash, R R and Bhandary, V S and Gupte, P K (1967) Moulding characteristics of Maharashtra Silica sand M.S.S.2. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Datta, A K (2014) Responses of stiffened plates with varying depth of stiffeners under uniform lateral loads. In: International conference on Fatigue Damage of Structural Materials X, September 21-26, 2014, Hyannis, USA. Dey, R and Tarafder, S and Sivaprasad, S (2016) Influence of phase transformation due to temperature on cyclic plastic deformation in 304LN stainless steel. International Journal Of Fatigue, 90 (IF-2.899). pp. 148-157. Dey, Shobhana and Mohanta, M K and Singh, Ratnakar (2017) Mineralogy and textural impact on beneficiation of goethitic ore. International Journal of Mining Science and Technology, 27(3) (IF-1.383). pp. 445-450. Dey, U K (2012) Fracture Behaviour of Dissimilar Metal Weld Materials 304 LNSS & SA508 Cl. 3 Steel in Nuclear Piping. Masters thesis, NIT, Jamshedpur. Dhar, S and Banerjee, S K and Narayanan, P I A (1965) Grindability tests on a Fluorspar sample from Rajasthan. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Dipali, Ranjit and Prasad, R K and Sahu, S K and Randhawa, N S (2023) Design and Optimization Study of Metal Recovery from Scrap NdFeB Magnets Using Response Surface Methodology. Industrial & Engineering Chemistry Research, 62(30) . pp. 11948-11956. Director, NML (2020) Journal of Metallurgy and Materials Science : Special Issue on Advanced Materials. In: Journal of Metallurgy and Materials Science. CSIR-NML, Jamshedpur, Jamshedpur, pp. 1-158. ISBN 0974-1267 Director, NML (2020) Journal of Metallurgy and Materials Science : Special Issue on Specialized and Smart Coatings. In: Journal of Metallurgy and Materials Science. CSIR-NML, Jamshedpur, Jamshedpur, pp. 1-112. ISBN 0974-1267 Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, S (2016) Mechanical properties and durability of volcanic ash based geopolymer mortars. Construction and Building Materials, 124 (IF-3.169). pp. 606-614. Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, Sanjay (2016) Reactivity of volcanic ash in alkaline medium, microstructural and strength characteristics of resulting geopolymers under different synthesis conditions. Journal Of Materials Science, 51(22) (IF-2.599). 10301-10317. Dolzhenko, P and Odnobokova, M and Tikhonova, M and Kaibyshev, R and Chowdhury, S G and Belyakov, A (2023) Grain boundary assembly in a 316 L steel produced by selective laser melting and annealing. Materials Characterization, 206(Part: A) . Dutt, Ashimesh and Rao, H V Bhaskar (1960) Studies on Clays from Bansi, Mirzapur District. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Dutta, A and Shivaji, T and Ghosh, M and Fernandes, R and De, P K and Nayak, D and Sharma, R (2021) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry & Physics . (In Press) Dutta, A K and Sivaprasad, S and Bar, H N and Prasad, P and Kumar, K (2016) Numerical modelling of dissipation energy of high tensile steel frames against cyclic earthquake excitations. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 133-146. Dutta, Abinash (2011) Biomimetic synthesis and characterization of calcium silicate and hydroxyapatite nanoparticles from natural sources (Rice husk ash and Mollusc shell). Masters thesis, CSIR-National Metallurgical Laboratory. Dutta, Chandan and Das, T K and Hawaldar, R and Kumar, J and Sagar, S P (2022) Delineation of Parametric Controls on LTCC-Based Eddy Current Sensor Exposed to High Temperature. IEEE Transactions on Instrumentation and Measurement, 71 . Dutta, S and Das, Arpan and Barat, K and Roy, Himadri (2012) Automatic characterization of fracture surfaces of AISI 304LN stainless steel using image texture analysis. Measurement: Journal of the International Measurement Confederation, 45 (5). pp. 1140-1150. Dwivedi, Deepak and Randhawa, N S and Saroj, Sanjay and Jana, Ranjeet Kumar (2017) An Overview of Manganese Recovery by Hydro and Pyro-Metallurgical Routes. Journal of The Institution of Engineers (India): Series D, 98(1) . pp. 147-154. GGautam, P and De, A K and Rao, M D and Sinha, I and Behera, C K and Singh, K K (2023) Waste remediation: Low-temperature synthesis of hybrid Cu(OH)2/CuO and CuO nanostructures from spent printed circuit boards and their dye degradation studies. Environmental Science and Pollution Research . Ghali, Venkata Subbarao and Mulaveesala, Ravibabu (2011) Recent Advances in Non-stationary Thermal Non-destructive Characterization. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Ghorai, S and Mandal, G K and Roy, S and Minj, R K and Agarwal, Anup and Singh, D P and Kumar, A and Ramna, R B V (2017) Treatment of LF slag to prevent powdering during cooling. Journal of Mining and Metallurgy Section B- Metallurgy , 53(2)B (IF-0.804). pp. 123-130. Ghosh, Arpita and Sahoo, S and Ghosh, M and Ghosh, R N and Chakrabarti, D (2014) Effect of microstructural parameters,micro texture and matrix strain on the Charpy impact properties of low carbon HSLA steel containing MnS inclusions. Materials Science and Engineering A, 613 (IF-2.409). pp. 37-47. Ghosh, M and Barat, K and Das, Swapan K and Ravi Kumar, B and Pramanick, A K and Chakraborty, J and Das , Goutam and Hadas, S and Bharathy, S and Ray , S K (2014) Variation in Mechanical Properties and Heterogeneity in Microstructure of High-Strength Ferritic Steel During Mill Trial. Metallurgical Transaction A, 45A (IF-1.730). pp. 2719-2731. Ghosh, M and Gunjan, M K and Das, Swapan K and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2010) Effect of Mn on Sn–Ag–Cu ternary lead free solder alloy–Cu assembly: a comparative study. Materials Science and Technology, 26 (5). pp. 610-614. Ghosh, M and Gupta, R K and Husain, M M (2014) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transactions A, 45A (IF-1.730). pp. 854-863. Ghosh, M and Husain, M M and Gupta, R K (2012) Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Plain Carbon Steel. ISIJ International, 52 (3). pp. 477-482. Ghosh, M and Kar, Abhijit and Das, Swapan K and Ray, Ajoy K (2009) Aging Characteristics of Sn-Ag Eutectic Solder Alloy with the Addition of Cu, In, and Mn. Metallurgical and Materials Transactions A, 40A . pp. 2369-2376. Ghosh, M and Kumar, K and Mishra, R S (2011) Friction stir lap welded advanced high strength steels: Microstructure and mechanical properties. Materials Science and Engineering A, 528 . pp. 8111-8119. Ghosh, M and Kumar, K and Mishra, R S (2012) Process Optimization for Friction-Stir-Welded Martensitic Steel. Metallurgical & Materials Transactions A, 43A . pp. 1966-1975. Ghosh, M and Kumar, Rajneesh and Husain, M M (2013) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transaction A (IF-1.738). Ghosh, M and Santosh, R and Das, Swapan K and Das, Goutam and Mahato, B and Korody, J and Kumar, S and Singh, P K (2015) Effect of Structural Heterogeneity on In Situ Deformation of Dissimilar Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions A, 46A (IF-1.730). pp. 3555-3568. Goswami, J and Chatterjea, A B (1956) Efficacy of fusite in De-sulphurising off-grade pig iron and composition of mechanical properties of the treated and the untreated cast iron. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Goudar, D M and Srivastava, V C and Rudrakshi, G B (2017) Effect of Atomization Parameters on Size and Morphology of Al-17Si Alloy Powder Produced by Free Fall Atomizer. Engineering Journal, 21(1) (IF-0.384). pp. 155-168. Goudar, D M and Srivastava, V C and Rudrakshi, G B and Raju, K and Ojha, S N (2015) Effect of Tin on the Wear Properties of Spray Formed Al–17Si Alloy. http://link.springer.com/article/10.1007%2Fs12666-015-0573-1, 68 (IF-0.615). pp. 3-7. Guguloth, K and Fernando, D.C and Paulose, N and Sahu, J K (2021) Evolution of microstructure during tensile creep deformation of nickel-based disk superalloy. International Journal of Pressure Vessels and Piping, 194 Part A . Guguloth, K and Roy, Nilima (2017) Creep deformation behavior of 9Cr1MoVNb (ASME Grade 91) steel. Materials Science and Engineering A, 680 (IF-3.094). pp. 388-404. Guguloth, K and Roy, Nilima (2023) Creep life estimation of reformer alloy using 0-projection method- A neuro fuzzy approach. International Journal of Pressure Vessels and Piping, 203 . Guguloth, K and Roy, Nilima (2018) Study on the creep deformation behavior and characterization of 9Cr-1Mo-V-Nb steel at elevated temperatures. Materials Characterization, Volume 146, December 2018, Pages 279-298 (IF-3.220). pp. 279-298. Guguloth, K and Swaminathan, J and Roy, Nilima and Ghosh, R N (2017) Uniaxial creep and stress relaxation behavior of modified 9Cr-1Mo steel. Materials Science and Engineering A- Structural Materials Properties Micro-structure and Processing, 684 (IF-3.094). pp. 683-696. HHao, X J and Yin, W and Strangwood, M and Peyton, A and Dickinson, S J and Morris, P F and Davis, C L (2011) Monitoring of Steel Microstructures using Electromagnetic Sensors. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Hasan, Sk Md and Ghosh, M and Chakrabarti, D and Singh, S B (2020) Development of continuously cooled low-carbon, low-alloy, high strength carbide-free bainitic rail steels. Materials Science & Engineering A, 771 (IF-4.081). p. 138590. Himadri, Roy (2011) Monotonic and cyclic fracture behaviour of AISI 304LN stainless steel. PhD thesis, Indian Institute of Technology, Kharagpur. Hore, S and Das, S K and Banerjee, S and Mukherjee, S (2016) An adaptive neuro-fuzzy inference system-based modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking , 44(9) (IF-0.985). pp. 1-10. Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2017) An adaptive neuro-fuzzy inference systembased modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking, 44(9) (IF-0.985). pp. 656-665. Husain, M M and Sarkar, R and Pal, T K and Prabhu, N and Ghosh, M (2015) Friction Stir Welding of Steel: Heat Input, Microstructure, and Mechanical Property Co-relation. Journal of Materials Engineering and Performance, 24 (IF-0.998). pp. 3673-3683. Husain, M M and Sarkar, R and Pal, T K and Ghosh, M and Prabhu, N (2017) Quantification of Microtexture at Weld Nugget of Friction Stir-Welded Carbon Steel. Journal of Materials Engineering and Performance , 26(5) (IF-1.331). pp. 2047-2056. Husain, Md Murtuja and Halder, N and Meena, L K and Ghosh, M (2023) Evaluation of Microstructure, Mechanical Properties, Wear Resistance and Corrosion Behaviour of Friction Stir‑Processed AZ31B‑H24 Magnesium Alloy. Metallography, Microstructure & analysis . JJamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2011) Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution – Long term evaluation by EIS. Corrosion Science, 53 . pp. 645-654. Jariwala, Deep and Chandra , Kaushik and Cao, Anyuan and Saikat , Talapatra and Shima, Mutshihiro and Anuhya, D and Prasad, V V S and Ribeiro, R and Canfield, P C and Wu, D and Srivastava , Anchal and Mandal, R K and Pramanick, A K and Vajtai , Robert and Ajayan , Pulickel M and Sastry, G V S (2012) Growth of Carbon Nanotubes on Quasicrystalline Alloys. The Banaras Metallurgist, 17 . pp. 57-67. Jayakumar, T and Kumar, Anish (2011) Nondestructive Evaluation of Microstructure and Stresses in Steels. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Jena, P S M and Rai, R K and Roy, P K and Sahu, J K (2017) Role of internal oxidation and iron penta carbonyl formation on creep life of 9Cr-1Mo steel. Materials at high temperatures, 34(4) (IF-0.0802). pp. 239-249. Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Tarafder, S (2016) Role of Chloride in the Corrosion and Fracture Behavior of Micro-Alloyed Steel in E80 Simulated Fuel Grade Ethanol Environment. Materials, 9(6) (IF-2.654). Joshi, R M and Thimmaiah, K S and Deshpande, R V and Maheshwari, M D (2011) Nondestructive Evaluation of Weld seam Failures in Tubes and Other Structures for Thermal, Wind and Nuclear Power Applications. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. KKanari, N and Mishra, D and Gaballah, I and Dupre, B (2004) Thermal decomposition of zinc carbonate hydroxide. Thermochimica Acta, 410 (1-2). pp. 93-100. Kancharla, H and Mandal, G K and Kumar, R R and Chakraborty, A and Singh, S S and Mondal, K (2022) Effect of Annealing Time on Coating Microstructure, Frictional and Electrochemical Behavior of Galvannealed Interstitial-Free Steel. Journal of Materials Engineering and Performance . Kante, Murali and Reddy, Rama Koti and Ghali, Venkata Subbarao and Mulaveesala, Ravibabu (2011) Frequency Modulated Infrared Imaging for Non-Destructive Testing of Steel Materials. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Kar, B C (1954) High purity electrolytic manganese from low-grade ore as a substitute for various forms of manganese now being used in Metallurgical Industries. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Kar, B C and Banerjee, T (1956) Electrolytic Manganese in Metal Industries. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Kar, B C and Gupte, M K and Muthukrishnan, V (1956) An improved technique for the simultaneous determination of Aluminium, Copper and Magnesium in Zinc Alloys by Spectrographic method. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Kar, J and Guguloth, K (2021) Effect of Beam Oscillation on Creep Properties of Electron Beam Welded AISI 316L Stainless Steel. Metals and Materials International . Kar, Shubhada and Meena, L K and Srivastava, V C and Mandal, G K (2023) Microstructural, Mechanical, and Corrosion Behaviour of Ni-Fe-Cr-Al and Ni-Fe-Cr-Al-Co Alloys. Transactions of the Indian Institute of Metals . Karmakar, A and Ghosh, M and Chakrabarti, D (2013) Cold-rolling and inter-critical annealing of low-carbon steel: Effect of initial microstructure and heating-rate. Materials Science & Engineering A, 564 (IF-2.108). pp. 389-399. Kartha, K N and Balasankar, K K (1962) A Study of the moulding characteristics of the beach sands of Trivandrum (Kerala State). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Khadeer, S A and Babu, P R and Kumar, B R and Kumar, A S (2020) Influence of Upset Pressure on Microstructure and Mechanical Properties of Friction-Welded AISI 4140 Low Alloy Steel Pipes. Transactions of Indian Institute of Metals, 73(2) (IF-1.205). pp. 465-478. Khajuria, A and Akhtar, M and Bedi, R (2021) A novel approach to envisage effects of boron in P91 steels through Gleeble weld-HAZ simulation and impression-creep. Journal of Strain Analysis for Engineering Design . Khajuria, A and Modassir, A and Bedi, R and Kumar, Rajneesh and Ghosh, M and Das, C R (2020) Microstructural investigations on simulated intercritical heat-affected zone of boron modified P91-steel. Materials Science and Technology, 36(13) (IF-1.835). Khanna, M N and Nijhawan, B R (1950) Characteristics of foundry moulding sands. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Kishore, Kaushal and Chandan, A K and Hung, P T and Kumar, Saurabh and Ranjan, Manish and Kawasaki, M and Gubicza, Jeno (2023) Effect of Si on the evolution of plasticity mechanisms, grain refinement and hardness during high-pressure torsion of a non-equiatomic CoCrMnNi multi-principal element alloy. International Journal of Plasticity, 169 . Klimenov, Vasiliy A and Kroning, Michael and Kroning, Paul and Mohr, Friedrich and Reddy, K M and Wolf, Helmut (2011) NDT Controlled Production in Steel Industry. In: Proceedings of International Conference on Nondestructive Evaluation for Steel and Allied Industries - NDESAI, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Krishanan, R M and Nijhawan, B R (1955) Bonding characteristics of K (1) Bentonite received from Tata Engineering and Locomotive Company Ltd. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Krishanan, R M and Nijhawan, B R (1955) Moulding characteristics of Jubbulpore white sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Krishanan, R M and Nijhawan, B R (1955) Moulding characteristics of Rajmahal sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Krishna, K Gopala and Das, Goutam and Venkateswarlu, K and Kumar, K C Hari (2017) Studies on Aging and Corrosion Properties of Cryorolled Al–Zn–Mg–Cu (AA7075) Alloy. Transactions of the Indian Institute of Metals, 70(3) (IF-0.533). pp. 817-825. Krishnan, A A and Halder, B (1955) Interface energy studies of some Copper –Tin alloys containing a liquid phase. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Krishnan, A A and Halder, B (1954) Some observations on Sintered Steel Powder Compacts. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Krishnan, R M and Khanna, M N and Nijhawan, B R (1954) Bonding characteristics of Fulbonds and scope for development of Indigenous Fuller’s Earth. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Krishnan, R M and Khanna, M N and Nijhawan, B R (1952) Moulding sands for Piston ring castings. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Krishnan, R M and Nijhawan, B R (1955) Moulding characteristics of Beneficiated Quartzite Rock Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Krishnan, R M and Nijhawan, B R (1955) Moulding characteristics of Jubbulpore Green Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Krishnan, R M and Nijhawan, B R (1955) Moulding characteristics of Jubbulpore yellow sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2012) Electroless Ni-B-Si3N4 composite coating: deposition and evaluation of its characteristics properties. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42(7) . pp. 920-927. Kumar, Alok and Kumari, Sneha and Mustapha, K A and Chakladar, S and Chakravarty, S (2023) Geochemical characteristics of the Rajmahal coals in Dhulia North Block, Eastern India: implication to their utilization and environment. Environmental Geochemistry and Health, 40(10) SI . pp. 6967-6983. Kumar, Amarjeet and Murugaiyan, Premkumar and Panda, A K and Roy, Rajat K (2020) Effect of compositional elements and processing routes on structural and thermal response in Fe-based metallic glasses. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153279. Kumar, Amit and Guguloth, K and Pandey, S M and Fydrych, D and Sirohi, S and Pandey, C (2023) Study on Microstructure-Property Relationship of Inconel 617 Alloy/304L SS Steel Dissimilar Welds Joint. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science . Kumar, Arun and Agarwal, Ashish and Kumar, A and Kumar, Sunil (2023) Prediction of hot metal temperature in a blast furnace iron-making process using multivariate data analysis and machine learning methodology. Metallurgical Research & Technology, 120(6) . Kumar, Ashish and Nirala , A and Singh, V P and Sahoo, Biraj K and Singh, R C and Chaudhary, R and Dewangan, Ashok K and Gaurav, G K and Klemes, J J and Liu, X H (2023) The utilisation of coconut shell ash in production of hybrid composite: Microstructural characterisation and performance analysis. Journal of Cleaner Production, 398 . Kumar, C and Jena, P S M and Singh, R K and Harmain, G A and Sahu, J K (2021) Strain ratio effect on microstructural evolution during low cycle fatigue exploitation of nickel base superalloy IN 740H. International Journal of Pressure Vessels and Piping, 194 Part B . Kumar, G and Bar, H N and Kumar, A (2022) Influence of Dynamic Strain Aging on Ratcheting Deformation Behavior of SA333 Gr-6 Steel. Journal of Materials Engineering and Performance . Kumar, G and Kumar, A and Bar, H N (2021) Effect of dynamic strain aging on cyclic deformation in piping material SA333 Gr-6 steel. International Journal of Pressure Vessels and Piping, 194 Part A . Kumar, Krishna (2017) Scope Of Distillation in Extraction,Purification & Recycling of Strategic Metals- a review. International conference on Non-ferrous Minerals & Metals - 2017 . pp. 65-72. Kumar, M S and Yang, C H and Farooq, M U and Kavimani, V and Adesoji, A A (2023) Enhanced structural integrity of Laser Powder Bed Fusion based AlSi10Mg parts by attaining defect-free melt pool formations. Scientific Reports, 13(1) . Kumar, P and Kumar, Rakesh and Rai, B and Subramanian, S and Srikanth, S (2017) Preface. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 251-252. Kumar, P and Mondal, A K and Ghosh Chowdhury, S and Krishna, G and Ray, A K (2017) Influence of additions of Sb and/or Sr on microstructure and tensile creep behaviour of squeeze-cast AZ91D Mg alloy. Materials Science and Engineering A-Structural Materials Properties Micro-structure and Processing, 683 (IF-3.094). pp. 37-45. Kumar, R Sandeep and Joshi, Deepa and Kumar, Yudhisther and Gupta, Reeta and Kumar, Ashok (2011) EMAT Based Ultrasonic System for Determination of Thickness Variation in Metallic Samples. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Kumar, Rakesh and Srivastava, J P and Premchand, (1998) Utilization of iron values of red mud for metallurgical applications. In: Environmental and Waste Management (ISSN : 0971-9407). National Metallurgical Laboratory, Jamshedpur, India, Jamshedpur, India, pp. 108-119. Kumar, Sanjay and Mucsi, G and Kristaly, Ferenc and Pekker, P (2017) Mechanical activation of fly ash and its influence on micro and nano-structural behaviour of resulting geopolymers. Advanced Powder Technology, 28(3) (IF-2.659). pp. 805-813. Kumar, Sujeet and Djobo, Jean NoëlYankwa and Kumar, Anil and Kumar, Sanjay (2016) Geopolymerization behavior of fine iron-rich fraction of brown fly ash. Journal of Building Engineering, 8 (IF-1.055). pp. 172-178. Kumar, Sunil (2017) Effect of applied force and atomic organization of copper on its adhesion to a graphene substrate. RSC Advances, 7(40) (IF-3.108). pp. 25118-25131. Kumar, Sunil and Das, Suchandan K (2017) A triaxial tensile deformation-induced nanoporous structure of aluminium: estimation of surface area, solid volume, and dimensionless aspect ratio. Physical chemistry chemical physics, 19(31) (IF-4.123). pp. 21024-21032. Kumar, U and Das Chakraborty, S and Sahu, Ranjan K and Bhattacharya, P and Mishra, T (2021) Improved Interfacial Charge Transfer on Noble Metal-Free Biomimetic CdS-Based Tertiary Heterostructure @ 2D MoS2-CdS-Cu2O with Enhanced Photocatalytic Water Splitting. Advanced Materials Interfaces . Kumari, A and Tripathy, A K and Ramaswamy, V (2020) Performance characterization and misplacement studies of liquid–solid fluidized bed density separator for coal beneficiation using Taguchi-ANOVA method. Particulate Science & Technology . Kumari, Aarti and Sahu, K K and Sahu, S K (2019) Solvent Extraction and Separation of Nd, Pr and Dy from Leach Liquor of Waste NdFeB Magnet Using the Nitrate Form of Mextral (R) 336At in the Presence of Aquo-Complexing Agent EDTA. Metals, 9(2) . pp. 1-16. Kumari, Aarti and Sinha, Manish K and Sahu, S K and Pandey, B D (2016) Solvent Extraction and Separation of Trivalent Lanthanides Using Cyphos IL 104, a Novel Phosphonium Ionic Liquid as Extractant. Solvent Extraction and Ion Exchange, 34(5) (IF- 2.456). pp. 469-484. Kumari, Aayushi and Kedia, Priyanshu and Mandal, Eisha and Mandal, S K (2017) Flaw patterns characterization in material images using linear coorelation method. Journal of Metallurgy and Materials Science, 59(2) . pp. 67-74. Kumari, Anjan and Jha, Manis K and Singh, R P and Ranganathan, S (2017) Investigation of the influence of inert and oxidizing atmospheres on the efficiency of decomposition of waste printed circuit boards (WPCBs). Heat and Mass Transfer, 53(4) (IF-1.233). pp. 1247-1255. Kumari, Archana and Jha, Manis K and Pathak, D D and Chakravarty, S and Lee, Jae-chun (2019) Processes developed for the separation of europium (Eu) from various resources. Separation and Purification Reviews, 48(2) . pp. 91-121. Kumari, Archana and Jha, Manis K and Yoo, Kyoungkeun and Panda, Rekha and Lee, J Y and Kumar, J Rajesh and Pathak, D D (2019) Advanced process to dephosphorize monazite for effective leaching of rare earth metals (REMs). Hydrometallurgy, 187 . pp. 203-211. Kumari, Archana and Panda, Rekha and Lee, J Y and Thriveni, Thenepalli and Jha, Manis K and Pathak, D D (2019) Extraction of rare earth metals (REMs) from chloride medium by organo-metallic complexation using D2EHPA. Separation and Purification Technology, 227 . LLagashetty , A K and Ganiger, S K (2018) Microwave-assisted synthesis, characterisation and thermal study of nano sized metal aluminates. Journal of Metallurgy and Materials Science, 60(3) . pp. 139-148. Lagutkin, S and Achelis, L and Sheikhaliev, S and Uhlenwinkel, V and Srivastava, V C (2004) Atomization process for metal powder. Materials Science and Engineering A, 383 . pp. 1-6. Lahiri, B B and Bagavathiappan, S and Saravanan, T and Rajkumar, K V and Kumar, Anish and Philip, John and Jayakumar, T (2011) Defect Detection in Weld Joints by Infrared Thermography. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Lee, Taejong and Lee, Soowhan and Kim, Nohyu and Lim, Jongsoo (2011) Thermo-graphic Detection of Surface Cracks. In: Proceedings of the International Conference on Nondestructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Lenka, Suvendu (2011) Basic Technique, Limitation and Application of Guided Waves, Phased Array and Electro-Magnetic Acoustic Transducer(EMAT). In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Liu, J and Zhou, L and Hao, X J and Strangwood, M and Peyton, A and Morris, P F and Davis, C L (2011) Non-destuctive Evaluation of Power-Generation Steel Microstructure Changes Using Electromagnetic Sensors. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries NDESAI - 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. MMadge, S V and Louzguine, D V and Lewandowski, J J and Greer , A L (2012) Toughness, extrinsic effects and Poisson’s ratio of bulk metallic glasses. Acta Materialia, 60 . pp. 4800-4809. Mahanty, M S and Misra, R N and Bhatnagar, P P (1965) Extraction characteristics of Alumina from Mysore Bauxite. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Mahato, P and Murmu, Manilal and Banerjee, P and Mishra, S K (2022) Magnetron sputtered films prepared from sintered Ti-based target and evaluation of tribological properties under the ball on disc condition with varying thickness and load. Journal of Adhesion Science and Technology . Mamgain, Anubhuti and Upadhyay, Trilok Chandra (2017) Study of dielectric constant and loss tangent in potassium dihydrogen phosphate crystal. Journal of Metallurgy and Materials Science, 59(2) . pp. 59-66. Mandal, C and Mishra, A K and Prasad, R R and Avtar, Ram and Mukerjee, D (2011) A non destructive method to detect the incipient fault in rolling element bearing. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Mandal, D and Ghosh, M and Pal, J and De, P K and Das, Goutam and Das, Swapan K and Ghosh Chowdhury, S and Lakra, B A and Ghosh, Sukomal (2006) Development of Cast Austempered Fe-Si-Mn-ME (Microalloying Elements) Steels. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted) Mandal, G K and Das, Suchandan K and Balasubramaniam, R and Mehrotra, S P (2011) Evolution of microstructures of galvanised and galvannealed coatings formed in 0.2 wt-% aluminium–zinc bath. Materials Science and Technology, 27 (8 ). pp. 1265-1270. Mandal, G K and Kumar, Sudhir and Kumar, Tipu and Srivastava, V C (2017) Hot Deformation Behaviour of a Nb-Mo Linepipe Steel. Transaction of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1943-1951. Mandal, G K and Stanford, Nicole and Hodgson, Peter and Beynon, John H (2012) Effect of hot working on dynamic recrystallisation study of as-cast austenitic stainless steel. Materials Science and Engineering A, 556 . pp. 658-695. Mandal, M and Patra, S and Chakraborty, R and Saha, Partha and Shome, M (2022) Microstructural evolution and nanoindentation study of magnetic pulse welded Nitinol and Aluminium sheets. Materials Characterization, 184 . Manjunath, K and Tewary, S and Khatri, N and Cheng, K (2023) Monitoring of machining process anomalies in diamond turning of Ti6Al4V alloy using transfer learning-based algorithms. Computers& Industrial Engineering , 182 . Marinelli, María Cecilia and Giertler, Alexander and Sahu, J K and Herenu, Silvina and Alvarez-Armas, Iris and Krupp, Ulrich (2012) The Effect of Ferrite Embrittlement in Duplex Steel on Fatigue Crack Propagation from the Low (LCF) to the Very High Cycle Fatigue (VHCF) Regime. In: 19th EUROPEAN CONFERENCE ON FRACTURE, Fracture Mechanics for Durability, Reliability and Safety, August 26-31, 2012, Kazan, Russia. Meena, L K and Gorja, S R and Bhardwaj, A and Singh, Raghuvir (2024) Service Domains of 13Cr Martensitic Stainless Steels: A Review of State-of-Art Knowledge vis-à-vis ANSI/NACE MR0175/ISO 15156. Transactions of The Indian Institute of Metals . Mehta, Nirajkumar C and Shukla, Dipesh D (2017) Stress life analysis of induction furnace wall for magnesia ramming mass. Journal of Metallurgy and Materials Science, 59(2) . pp. 85-101. Meshram, Pratima and Abhilash, and Panday, B D and Mankhand, T R and Deveci, Haci (2016) Acid baking of spent lithium ion batteries for selective recovery of major metals: A two-step process. Journal of Industrial and Engineering Chemistry, 43 (IF- 4.421). pp. 117-126. Meshram, Pratima and Bhagat, Lalit and Prakash, U and Pandey, B D and Abhilash, (2017) Organic acid leaching of base metals from copper granulated slag and evaluation of mechanism. Canadian Metallurgical Quarterly , 56(2) (IF -0.596). pp. 168-178. Meshram, Pratima and Pandey, B D and Abhilash, (2019) Advanced Review on Extraction of Nickel from Primary and Secondary Sources. Journal Mineral Processing and Extractive Metallurgy Review , 40(3) . pp. 157-193. Meshram, R B and Kundu, G and Mukherjee, D (2016) Heat Transfer Studies in Ejector-induced Downflow Bubble Column. International Journal of Chemical Reactor Engineering, 1(5) (IF-0.623). pp. 955-964. Metya, A and Ghosh, M and Parida, N and Palit Sagar, S (2008) Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel. NDT & E International, 41 . pp. 484-489. Metya, Avijit Kr and Ghosh, M and Parida, N and Balasubramaniam, Krishnan (2015) Effect of tempering temperatures on nonlinear Lamb wave signal of modified 9Cr–1Mo steel. Materials Characterization, 107 . pp. 14-22. Metya, Avijit Kr and Palit Sagar, S and Ghosh Chowdhury, S (2014) Evaluation of Crystallographic Texture in SS316L Steel by Ultrasonic Signal Analysis. In: National Conference on Nondestructive Evaluation (NDE-2014), 04-06 Dec 2014, Pune. Metya, Avijit Kumar and Bar, H N and Tarafder, Soumitra and Balasubramaniam, Krishnan (2017) Nonlinear Lamb wave for the assessment of ratcheting behavior in IF steel. Journal of Non Destructive Testing & Evaluation, 15/10 . Metya, Avijit Kumar and Murthy, G V S and Bar, H N and Parida, N (2009) Microstructural Characterization of Precipitation Process in a Nickel-Alloy by Non-linear Ultrasonic. In: Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation, December 10-12, 2009, Trichy. Metya, Avijit Kumar and Pramanick, A K and Bar, H N and Gupta, Suneel K and Sagar, Sarmishtha Palit (2023) Detection of fatigue crack initiation pre-cursor in meta-stable SS 304LN using Rayleigh surface wave harmonic generation. Materials Characterization, 201 . Metya, Avijit Kumar and Tarafder, S and Balasubramaniam, Krishnan (2017) Characterization of Tempering Behaviour of Modified 9Cr-1Mo Steel by Ultrasonic Lamb wave Mixing. In: 2nd International Conference on Emerging Materials: Characterization and Application (EMCA-2017), March, 2017, NIT, Durgapur. Metya, Avijit Kumar and Tarafder, S and Balasubramaniam, Krishnan (2018) Nonlinear Lamb wave mixing for assessing localized deformation during creep. NDT & E International, 98 (IF-2.781). pp. 89-94. Metya, Avijit Kumar and Tarafder, Soumitra and Balasubramaniam, Krishnan (2019) Characterization of Tempering Behaviour of Modified 9Cr-1Mo Steel by Ultrasonic Lamb wave Mixing. Materialstoday :Proceedings, 11(Part 2) . pp. 695-699. Michla, J R J and Ravi Kumar, B and Prabhu, T Ram and Siengchin, S and Kumar, M A and Rajini, N (2022) Effect of nitriding on mechanical and microstructural properties of Direct Metal Laser Sintered 17-4PH stainless steel. Journal of Materials Research and Technology-JMR&T, 19 . pp. 2810-2821. Mishra, D and Anand, S and Panda, R K and Das, R P (2002) Characterization of Products Obtained during Formation of Barium Monoaluminate through Hydrothermal Precipitation–Calcination Route. Journal of American Ceramic Society, 85 . pp. 437-443. Mishra, D and Anand, S and Panda, R K and Das, R P (2002) Effect of anions during hydrothermal preparation of boehmites. Materials Letters, 53 . pp. 133-137. Mishra, D and Anand, S and Panda, R K and Das, R P (2000) Hydrothermal preparation and characterization of boehmites. Materials Letters, 42 . pp. 38-45. Mishra, D and Anand, S and Panda, R K and Das, R P (2002) Preparation of barium hexa-aluminate through a hydrothermal precipitation–calcination route and characterization of intermediate and final products. Materials Letters, 56 . pp. 873-879. Mishra, D and Anand, S and Panda, R K and Das, R P (2004) Studies on characterization, microstructures and magnetic properties of nano-size barium hexa-ferrite prepared through a hydrothermalprecipitation–calcination route. Materials Chemistry and Physics, 86 . pp. 132-136. Mishra, D and Anand, S and Panda, R K and Das, R P (2003) Synthesis of high-surface area Mn-doped barium hexa-aluminates by a combination of hydrothermal precipitation–calcination route. Materials Chemistry and Physics, 82 . pp. 892-896. Mishra, D and Anand, S and Panda, R K and Das, R P (2004) X-ray diffraction studies on aluminum-substituted barium hexaferrite. Materials Letters, 58 . pp. 1147-1153. Mishra, D and Sahu, K K and Agrawal, A (2018) Process integration for material synthesis from a deactivated catalyst: Studies on the interaction of metal ions between two immiscible phases. Journal of Hazardous Materials, 344 (IF-6.434). pp. 169-178. Mishra, D and Sinha, S and Sahu, K K and Agrawal, A and Kumar, R (2017) Recycling of Secondary Tungsten Resources. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 479-485. Mishra, G and Chandan, A.K. and Kundu, S (2017) Hot rolled and cold rolled medium manganese steel: Mechanical properties and microstructure. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 701 (IF-3.094). pp. 319-327. Mishra, Suman K and Kumari, Swati (2017) Development of hard and optically transparent Al-Si-N nanocomposite coatings. Surface and Interface Analysis, 49(4) (IF-1.132). pp. 345-348. Mishra, Suman K and Mahanta, P and Sen, S and Pathak, L C (2012) Effect of Nitrogen on the Growth of Carbon Nitride Thin Films Deposited by RF Plasma Enhanced Chemical Vapor Deposition. Nanoscience and Nanotechnology Letters, 4 . pp. 90-94. Mishra, Suman K and N, Jagdeesh and Pathak, L C (2016) Fabrication of Nanosized Lanthanum Zirconate Powder and Deposition of Thermal Barrier Coating by Plasma Spray Process. Journal Of Materials Engineering And Performance, 25(7) (IF-1.331). pp. 2570-2575. Mishra, T (2020) Prospective of titania based photocatalyst for environmental reduction reactions. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 135-146. Mohan, Jatinder and Somayajulu, B V and Bhatnagar, S S (1960) Moulding and core characteristics of Red Core sand by M/s Kirloskar Brothers Limited, Kirloskarvadi, Bombay. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Mohan, Jatinder and Somayajulu, B V and Bhatnagar, S S (1960) Moulding and core characteristics of red core sand sent by M/S Kirloskar brothers limited kirlosskarvadi Bombay. Other (TMP). CSIR NML. Mohan, Jatinder and Somayajulu, B V and Bhatnagar, S S (1960) Moulding characteristics of Hyderabad white sand from M/s Kirloskar Brothers Ltd., Kirloskarvadi. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Mohanta, Ojaswini (2011) Development of Co-Fe Based Nanostructured Soft Magnetic Materials for High Temperature Applications. PhD thesis, Bengal Engineering and Science University, Shibpur, Howrah. Mohanty, Ashok and Chakladar, S and Mallick, S and Chakravarty, S (2019) Structural characterization of coking component of an Indian coking coal. Fuel, 249 . pp. 411-417. Mohta, Keshav and Gupta, Suneel K and Soupramanien, C and Swaminathan, J and Chattopadhyay, J (2020) High temperature deformation behavior of Indian PHWR Calandria material SS 304L. Nuclear Engineering and Design, 368 (IF-1.620). Mude, Rupla Naik and Panda, Soma Sekhara Balaji and Ghali, Venkata Subbarao and Muniyappa, Amarnath and Mulaveesala, Ravibabu (2011) Coded Excitation for Infrared Non-destructive Testing of Steel Materials. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries -NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Mukherjee, Shreya and Sivaprasad, S and Tarafder, Soumitra and Bhattacharyya, D and Kar, Sujoy Kumar (2022) Influence of ageing on high temperature tensile deformation of a Ni- based superalloy, HAYNES 282. Journal of Alloys and Compounds, 917 . Murugaiyan, Premkumar and Bedanta, Subhankar and Jena, S K and Panda, A K and Mitra, A and Bysakh, S and Roy, Rajat K (2020) Crystallization and magnetic hardening behaviour of Fe-rich FeSiBNb(Cu) melt-spun alloys. Journal of Magnetism and Magnetic Materials, 502 (IF-2.683). p. 166528. Murugaiyan, Premkumar and Mitra, Amitava and Patro, A K and Roy, Rajat K and Panda, Ashis K (2023) Magnetostriction of Fe-rich FeSiB(P)NbCu amorphous and nanocrystalline soft-magnetic alloys. Journal of Alloys and Compounds, 960 . Murugan, S S and Rajan, T P D (2018) Characterization and heat treatment of Al6061 with and without TiB2. Journal of Metallurgy and Materials Science, 60(2) . pp. 73-78. Murugesan, A P and Mandal, M and Poddar, Palash and Bagui, Sumanta (2023) Effect of Alloying Elements on the Dry Sliding Wear Characteristics of Gravity-Cast Mg-Sn Based Alloys. Journal of Materials Engineering and Performance . NNair, N R K and Narayanan, P I A (1955) Crushing strength of Bhanpuri Limestone for the Bhilai Steel Project. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Nanda, T and Ravi Kumar, B and Sharma, S and Singh, V and Pandey, O P (2017) Effect of thermal cycling process parameters on recrystallization kinetics for processing of fine-grained pure copper. Materials and Manufacturing Processes, 32(1) (IF-2.274). pp. 34-43. Nanda, T and Ravi Kumar, B and Singh, V (2016) A Thermal Cycling Route for Processing Nano-grains in AISI 316L Stainless Steel for Improved Tensile Deformation Behaviour. Defence Science Journal, 66(5) (IF-0.500). pp. 529-535. Nandi, Sukalpan and Kumar, Sunil (2023) Atomistic structural transformation of iron single crystal under bi-axial stretching using classical molecular dynamics simulation. Bulletin of Materials Science, 45(4) . Narasimhan, B R V and Prabhakar, S and Manohar, P and Gnanam, F D (2002) Synthesis of gamma ferric oxide by direct thermal decomposition of ferrous carbonate. Materials Letters, 52 . pp. 295-300. Narayanan, P I A and Chopra, M S (1957) Preliminary Report on the Possibility of beneficiating a sand sample from the associated Cement Companies Ltd. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Narayanswamy, C V and Nijhawan, B R (1949) Effect of Manganese on Steel. Other (TMP). CSIR, NML. (Unpublished) Nath, S K and Kumar, Sanjay (2016) Evaluation of the suitability of ground granulated silico-manganese slag in Portland slag cement. Construction and Building Materials, 125 (IF-3.169). pp. 127-134. Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2017) Kinetics study of geopolymerization of fly ash using isothermal conduction calorimetry. Journal of Thermal Analysis and Calorimetry, 127(3) (IF-1.953). pp. 1953-1961. Nath, S K and Rajshekhar, Y and Alex, T C and Venugopalan, T and Kumar, Sanjay (2017) Evaluation of the Suitability of Alternative Binder to Replace OPC for Iron Ore Slime Briquetting. Transactions of the Indian Institute of Metals, 70(8) (IF- 0.533). pp. 2165-2174. Nath, S K and Kumar, Sanjay (2018) Influence of Granulated Silico-Manganese Slag on Compressive Strength and Microstructure of Ambient Cured Alkali-Activated Fly Ash Binder. Waste and Biomass Valorization, 10 (IF-1.337). pp. 2045-2055. Nayak, B and Meyer, Franz Michael (2017) Manganilmenite in the magnetite ore body from Pokphur area of Nagaland, North East India and the possibility of microdiamonds in the ophiolites of Indo-Myanmar ranges. Current Science, 112(1) (IF-0.843). pp. 155-160. Nguyen, T T and Yoo, Kyoungkeun and Jha, Manis K and Park, Jayhyun and Choi, Uikyu and Choe, Hongil and Lee, Jae-chun (2018) Removal of Heavy Metals from Tailing in Citrate Solution with Ferric Chloride. Materials Transactions, 59(10) . pp. 1665-1668. Nijhawan, B R (1957) Data on Indigenous Foundry sands and bonding clays. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Nijhawan, B R (1957) Investigation on Chandipur Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Nivas, R and Das, Goutam and Das, S K and Mahato, B and Kumar, Sanjay and Sivaprasad, K and Singh, P K and Ghosh, M (2017) Effect of Stress Relief Annealing on Microstructure & Mechanical Properties of Welded Joints Between Low Alloy Carbon Steel and Stainless Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 48 A(1) (IF-1.874). pp. 230-245. Nivas, R and Singh, P K and Das, Goutam and Das, S K and Kumar, S and Mahato, B and Sivaprasad, K and Ghosh, M (2017) A comparative study on microstructure and mechanical properties near interface for dissimilar materials during conventional V-groove and narrow gap welding. Journal of Manufacturing Processes, 25 (IF-2.322). pp. 274-283. Noor, Aman and Das, N N and Mishra, T (2016) Effect of N-doping on visible light activity of TiO2–SiO2 mixed oxide photocatalysts. Journal Of Environmental Chemical Engineering, 4(1) (IF-1.355). pp. 191-196. OOgundiran, M B and Kumar, Sanjay (2016) Synthesis of fly ash-calcined clay geopolymers: Reactivity, mechanical strength, structural and microstructural characteristics. Construction and Building Materials, 125 (IF-3.169). pp. 450-457. Omiogbemi, I M B and Faci, N D and Gummadi, A K and Negash, S M and Sardar, B and Gad, S M and Dagwa, I M and Audu, S T (2023) The Influence of Arc Welding Process on the Mechanical and Microstructural Characteristics of Low Carbon Steel in a Corrosive Environment. Macromolecular Symposia . PPaidi, A K and Sharma, A and Paidi, V K and Illa, M P and Lee , K S and Lee, S S and Ahu, D and Mukhopadhyay, Amartya (2023) Na2ZrFe(PO4)(3)-A Rhombohedral NASICON-Structured Material: Synthesis, Structure and Na-Intercalation Behavior. Inorganic Chemistry, 62(10) . pp. 4124-4135. Pal, J and Ghorai, S and Ammasi, A and Hota, S K and Koranne, V M and Venugopalan, T (2017) Improving reductibility of iron ore pellets by optimization of physical parameters. Journal of Mining and Metallurgy Section B- Metallurgy, 53(1) (IF-0.804). pp. 37-46. Pal, Partha Pratim and Mohan, Devendra and Dhoble, Yogesh and Bhattacharjee, S (2016) Adsorption of Cu(II) and Cr(III) by iron powder in aqueous medium. Journal of Metallurgy and Materials Science, 58(1) . pp. 1-8. Palit Sagar, S (2014) Non-linear ultrasonic for structural damage assessment: Approach at CSIR-National Metallurgical Laboratory. In: Workshop on current and future trends of Non-linear ultrasonic technique for NDE, 21-24 Oct, 2014, Seoul, Korea. Palit Sagar, S and Hua , Jia Jerry and Rose, Joseph (2010) Ultrasonic Guided Wave Phased Array Inspection of Pipelines. Journal of Non destructive Testing & Evaluation, 9 (2). pp. 33-36. Palit Sagar, S and Metya, Avijit Kumar and Dey, Swapna and Chattoraj, I (2008) Pitting Stochastic Study in Airframe Aluminium Alloy using Non-linear Ultrasonic. In: 17th World Conference on Nondestructive Testing, 25-28 Oct., 2008, Shanghai, China. (Submitted) Palit Sagar, S and Parida, N (2012) Centre for Non-destructive Evaluation at CSIR-National Metallurgical Laboratory, Jamshedpur for materials characterisation and damage evaluation: an Overview. In: 18th World Conference on NDT, 18th WCNDT, 16-20 April, 2012, Durban, South Africa. Palit Sagar, S and Parida, N (2013) Quality Assessment of Coated Rear Housing Component by Ultrasonic Technique. Consultancy (CNP). CSIR-NML. Palit Sagar, S and Prakash, Amit and Bandyopadhyay, D and Parida, N (2011) Feasibility of using ultrasonic technique to measure the blast furnace lining thickness. In: Advances in Analytical Techniques and Characterisation of Materials, July 5-7, 2011, RDCIS, Ranchi. Palit Sagar, S and Prakash, Amit and Metya, Avijit Kumar (2013) Determination of modulus of Aluminium alloy by ultrasonic technique. Sponsored (SSP). Internal Report, Jamshedpur. Palit Sagar, S and Ravi Kumar, B and Murthy, G V S and Metya, Avijit Kumar and Prakash, Amit and Mahato, B (2013) Evaluation of Residual Stress of HSS Rolls by Ultrasonic and X-ray diffraction based techniques. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted) Panda, A K and Metya, Avijit Kumar and Bar, H N and Roy, Rajat K and Murthy, G V S and Palit Sagar, S and Mitra, A (2012) Non-destructive evaluation for structural health assessment. Science and Culture . Panda, Ashis K and Anurag, Kumar and Das, S and Das, T K and Murugaiyan, Premkumar and Roy, Rajat K and Mitra, A (2023) Impact of stress-induced anisotropic modifications on magneto-impedance behavior of rapidly quenched CoFe-based microwires. Journal of Alloys and Compounds, 960 . Panda, D and Tripathy, S and Sabat, R K and Suwas, S and Sahoo, S K (2022) An Investigation on the Correlation Between Microstructure, Texture, and Mechanical Properties of Mg and its Alloys. Journal of Materials Engineering and Performance, 31 . pp. 9183-9199. Pandya, Achal and Singh, J K (2016) Transformation of chloride contaminated unstable rusts on weathering and plain carbon steels into stable forms by treatment with extract of fruit juice of Indian gooseberry (Amla). Journal of Metallurgy and Materials Science, 58(1) (IF- 0.04). pp. 47-52. Parida, N and Palit Sagar, S (2011) Non-destructive Testing and Evaluation at CSIR-National Metallurgical Laboratory, Jamshedpur for Iron and Steel Industry: an Overview. In: International Conference on NDE for Steel& Allied Industries, 2-3 December, 2011, SNTI, Jamshedpur. Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2008) Fretting corrosion of tin-plated contacts. Tribology International, 41 (7). pp. 616-628. Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Fretting corrosion of tin-plated contacts: Evaluation of surface characteristics. Tribology International, 40 (3). pp. 548-559. Parmar, Kavita and Bhattacharjee, S (2017) Energetically benign synthesis of lanthanum silicate through "silica garden" route and its characterization. Materials Chemistry and Physics, 194 (IF-2.084). pp. 147-152. Parthasarathy, M N and Srikantiah, B S and Nijhawan, B R (1951) Some observations on the structure of Spheroidal graphite in Nodular cast irons. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Paswan, D and Ansu, J K and Adeleke, A A and Ikubanni, P P and Christopher, C T and Roy, T K and Palai, P and Malathi, M (2022) Understanding casting behaviour of low carbon high manganese steel through detailed characterization of mould powder and mould top slag. Ironmaking & Steelmaking . Paswan, Dayanand and Mistry, D and Sahoo, K L and Srivastava, V C (2013) Development of Iron-based Closed-Cell Foams by Powder Forging and Rolling. Journal of Materials Engineering and Performance, 22(8) (IF-0.915). pp. 2201-2209. Pathak, Prashant and Karani, Arnab and Shome, M (2016) Development of HSLA steel with high temperature tensile properties. Journal of Metallurgy and Materials Science, 58(2) (IF- 0.04). pp. 57-64. Patil, Pravin J and Devi, Kadambini and Rane, D M and Sen, Amit and Sonawane, A U and Hussein, S A (2011) Application of Radiation Sources in Steel Industry in India. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Patra, A S and Gogoi, Gaurangi and Sahu, Ranjan K and Qureshi, M (2017) Modulating the electronic structure of lanthanum manganite by ruthenium doping for enhanced photocatalytic water oxidation. Physical Chemistry Chemical Physics, 19(19) (IF-4.123). pp. 12167-12174. Paul, S K and Roy, S and Sivaprasad, S and Tarafder, S (2019) Forming Limit Diagram Generation from In-Plane Uniaxial and Notch Tensile Test with Local Strain Measurement through Digital Image Correlation. Physical Mesomechanics , 22(4) . pp. 340-344. Paul, Surajit Kumar (2011) Experimentation and material modelling for cyclic plastic deformation behavior in Primary heat transport piping (PHT) materials. PhD thesis, Jadavpur University, Kolkata. Paul, Surajit Kumar (2016) Prediction of complete forming limit diagram from tensile properties of various steel sheets by a nonlinear regression based approach. Journal of Manufacturing Processes, 23 (IF- 2.322). pp. 192-200. Pereira, A R M and Hacha, R R and Torem, M L and Merma, A G and Silvas, F P C and Abhilash, (2021) Direct hematite flotation from an iron ore tailing using an innovative biosurfactant. Separation Science and Technology . Poddar, Palash and Bagui, Sumanta and Ashok, K and Murugesan, A P (2017) Experimental investigation on microstructure and mechanical properties of gravity-die-cast magnesium alloys. Journal of Alloys and Compounds, 695 (IF-3.133). pp. 895-908. Poddar, Palash and Kamaraj, A and Murugesan, A P and Bagui, Sumanta and Sahoo, K L (2017) Microstructural features of Mg-8%Sn alloy and its correlation with mechanical properties. Journal of Magnesium and Alloys, 5(3) . pp. 348-354. Poddar, Palash and Murugesan, A P (2019) Calculation of internal back stress of different gravity-die cast Mg-alloys during creep deformation. Journal of Metallurgy and Materials Science, 61(2) . pp. 61-72. Prabhakaram, P (1965) Mineralogy of some Indian Kaolinitic clays and crystalline of Kaolinite. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Prabhakaram, P and Murthy, H P S (1960) Thermo-Gravimetric studies on the low temperature Pyrolysis of Bituminous Coal. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Pradhan, Ratikanta and Karmakar, Anish and Ghosh, M and Chakrabarti, Debalay and Mukherjee, S (2019) Effect of thermomechanical processing on microstructural evolution in precipitation strengthened ferrite steel. SN Applied science . Prakash, Amit and Bar, H N and Sivaprasad, S and Tarafder, S and Dwivedi, J P (2017) The Effect of Residual Stress on Fatigue crack growth rate in AISI 304LN Stainless Steel. Materials Today: Proceedings, 4(2) . pp. 677-686. Prakash, R and Hembrom, K and Majumder, S K (2022) Interpretation of induction time and particle recovery in a microstructured counter-current flow column. Chemical Engineering and Processing-Process Intensification, 176 . Prakash, R and Sangtam, B T and Hembrom, K and Majumder, S K (2022) Bubble size analysis in a two-phase countercurrent flow in the narrow rectangular column. Physics of Fluids, 34(4) . Prakash, Ved and Tewari, C R and Nijhawan, B R (1965) Structure and Magnetic properties of some Alnico Magnet alloys : Effect of cooling rate and tempering treatment. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Pramanick, A K (2014) Al-Si-Zr Alloy Based Material For Biomedical Application. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Unpublished) Pramanick, A K (2000) Effect of composition on the streaking and diffuse intensity in decagonal phase in Al70−XCo15CuXCY Ni15−Y system. Materials Science and Engineering, 294-296 . pp. 173-177. Pramanick, A K (2001) Nature of streaking and ordering in rapidly solidified Al–Co–Cu–Ni system. Materials Science and Engineering, 304-306 . pp. 818-821. Pramanick, A K (2001) Special Diffraction Effects in Al7o_xCo15Cux+yNi15_y Decagonal Alloys. Ferroelectrics, 250 . pp. 273-279. Pramanick, A K and Das, Goutam and Das, Swapan K and Ghosh, M (2017) Failure investigation of super heater tubes of coal fired power plant. Case Studies in Engineering Failure Analysis, 9 . pp. 17-26. Pramanick, A K and Das, H and Reddy, G M and Ghosh, M and Nandy, S and Pal, T K (2018) Effect of Bainitic Microstructure on Ballistic Performance of Armour Steel Weld Metal Using Developed High Ni-Coated Electrode. Journal of Materials Engineering and Peformance . Pramanick, A K and Ghosh, M and Das, Goutam and Das, Swapan K and Minj, R K and Ghosh Chowdhury, S (2012) Strengthening Mechanism of Nb and V Microalloyed Low C Steel Rebars and Slabs-Phase-II. Collaborative (CLP). CSIR-NML, www.nmlindia.org. (Unpublished) Pramanick, A K and Gorai, S and Ghosh, M and Das, Goutam and Das, Swapan K (2014) Optimization of strength in V/N micro alloyed steel by varying vanadium content at fixed Nitrogen level. Collaborative (CLP). CSIR-NML, CSIR-NML, Jamshedpur. (Unpublished) Pramanick, A K and Sinha, Arvind and Nayar, S and Das, Goutam and Mitra, A (2013) Biomimetic Hydroxyapatite Coating on Zirconium Based Biocompatible Alloys. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Submitted) Pramanick, Ajit Kumar and Das, H and Reddy, G M and Ghosh, M and Das, Goutam and Nandy, S and Pal, T K (2016) Development and design of microstructure based coated electrode for ballistic performance of shielded metal arc welded armour steel joints. Materials & Design, 103 (IF 4.364). pp. 52-62. Prasad, T.v (1947) Studies on Indian refractory clays –examination of some clays by differential thermal analyses. x-ray and electron microscopic techniques. Other (TMP). CSIR NML, Jamshedpur. Puvvada, G V K and Murthy, D S R (2000) Selective precious metals leaching from a chalcopyrite concentrate using chloride/hypochlorite media. Hydrometallurgy, 58 (3). pp. 185-191. RRai, R K and Sahu, J K (2019) Mean-stress and oxidation effects on fatigue behaviour of CM 247 DS LC alloy. Materials Science and Technology, 35(10) . pp. 1220-1226. Rai, R K and Sahu, J K (2018) Mechanism of serrated flow in a cast nickel base superalloy. Materials Letters, 210 (IF-2.572). pp. 298-300. Rai, R K and Sahu, J K (2018) Substructural evolution in a directionally solidified nickel-base superalloy during relaxation fatigue tests at 850 degrees C. Materials Letters, 230 (IF-3.019). pp. 241-244. Rai, R K and Sahu, J K and Jena, P S M and Das, Swapan K and Paulose, N and Fernando, C D (2017) High temperature tensile deformation of a directionally solidified nickel base superalloy: Role of micro constituents. Materials Science and Engineering A, 705 (IF-3.094). pp. 189-195. Raj, Manish (2011) Ultrasonic Immersion C-Scan Imaging Technique : A Novel Tool to Evaluate and Optimize EMS Parameters for Continuously Cast Steel Billet Quality. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Raji, M A and Baba, A A and Abhilash, (2023) Uranium extraction from sulphuric acid leach liquor by Cyanex®272 as intermediate in nuclear fuel cell. Journal of Radioanalytical and Nuclear Chemistry, 332(11) . pp. 4471-4476. Rajnikanth, V and Munda, Parikshit and Mandal, D and Minj, R K and Das, Swapan K and Ghosh Chowdhury, S and Singh, S R (2009) Development and Evaluation of Wear Resistant Material. Exploratory (OLP). NML, Jamshedpur. (Submitted) Rajnikanth, V and Ray, Ajoy K and Das, Goutam and Ghosh, M and Das, Swapan K and De, P K (2008) Strain Hardening behavior of Al-Sc alloys. Exploratory (OLP). NML, Jamshedpur. (Submitted) Rajpurohit, R S and Mishra, P and Srinivas , N C S and Singh, S R and Singh, V (2020) Ratcheting Fatigue Behaviour of Zircaloy-2 at 300 degrees C. Metals and Materials International (IF-1.990). Rajshekhar, Y and Alex, T C and Sahoo, D P and Babu, G A and Balakrishnan, V and Venugopalan, T and Kumar, Sanjay (2016) Iron ore slime as an alternate coolant in steelmaking: Performance evaluation at commercial scale. Journal Of Cleaner Production, 139 (IF- 5.715). pp. 886-893. Ramachandrarao, P (1999) Phase Diagrams. In: Proceedings of the workshop on Materials Characterization Techniques - Principles and Applications , January 19-20,1999, NML. Ramadas, and Balasubramaniam, Krishnan and Joshi, Makarand (2011) Propagation Characteristics of Ao Mode in a Metallic Beam Containing a Semi-infinite Crack. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries -NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Ramakrishna Rao, M and Dutt, Ashimesh and Sen, Prithwis C and Bhaskar Rao, H V (1963) Studies on the utilization of Almora Magnesite: Part –II Effect of heat on the Constitution, Grain growth and Densification. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Ramakrishna Rao, M and Dutt, Ashimesh and Sen, Prithwis C and Bhaskar Rao, H V (1964) Studies on the Utilisation of Almora Magnesite –Its Refractory properties and improvements therein. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Raman, P V and Narayanan, P I A (1960) Beneficiation of Limestone rejects from Govt. Cement Factory, Churk, U.P. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Rana, A K and Paul, S K and Dey, P P (2019) Stress field in an isotropic elastic solid containing a circular hard or soft inclusion under uniaxial tensile stress. Materials Today:Proceeding, 11(Part-2) . pp. 657-666. Randhawa, N S and Kumar, Manoj and Kumar, Hemant and Prasad, Sanjay (2016) Enhancing titania value of a weathered ilmenite by reduction roasting - acid leaching. National coference on non-ferrous minerals & materials- 2016 . pp. 30-34. Randhawa, N S and Prasad, Sanjay and Kumar, Manoj (2017) Role of flux on the upgradation of llmenite by reduction roasting process. Indian Institute of mineral Engineers . Ranjan, Ravi (2018) TEM characterization of micro-alloyed vanadium steel at different percent reduction of rolling. Masters thesis, CSIR-NML. Rao, A U and Tiwari, S K and Kharb, A S and Chawla, V and Dubey, Paritosh and Goyat, M S and Saxena, V and Chawla, A K (2023) Impact of sputtering gas on the microstructural, mechanical and wetting properties of vanadium nitride coatings. Physica Scripta, 98(12) . Rao, D S and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Vijaya Kumar, T V (2009) Mineralogy and Geochemistry of a low grade iron ore sample from Bellary-Hospet sector, India and their implications on beneficiation. Journal of Minerals & Materials characterization & Engineering, 8 (2). pp. 115-131. Rao, D S and Vijaya Kumar, T V and Bhaskar Raju, G and Prabhakar, S and Ghosh, T K (2005) Alteration characteristics of illmenites from south India. Journal of Minerals and Materials Characterization and Engineering, 4 (1). pp. 47-59. Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2005) Alteration characteristics of manavalakurichi beach placer illmenite, Tamilnadu. Journal of Applied Geochemistry, 7 (2). pp. 195-200. Rao, H V Bhaskar and Subrahmanyam , A V (1958) Investigation Report on a sample of Bauxite supplied by M/s. Orissa Cement Co. Ltd. Rajgangpur. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Rao, M Ananda and Babu, S R and Kumar, M V Pavan (2017) Failure investigation of a cooling coil tube in zinc roaster furnace. Engineering Failure Analysis, 77 (IF-1.676). pp. 118-123. Rao, M Ananda and Kumar, M V Pavan and Rao, S Subba and Narasaiah, N (2021) Rheological behavior of coal-water slurry using sodium tripolyphosphate as a dispersant. International Journal of Coal Preparation and Utilization, 41(6) . pp. 385-397. Rao, M Ananda and Yerriswamy, V and Kumar, M V Pavan and Narasaiah, N (2019) A comparative study on the rheological properties of two coal water slurries with sodium tripolyphosphate as dispersant. International Journal of Coal Preparation and Utilization . pp. 1-13. Rao, M R K and Moorthy, V K and Sen, P C and Singh, Rabindar (1956) Study of Chrome ores for Refractory Industry: Part-II-Chemical composition and Refractory properties of Indian Chromites. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Rao, M R K and Sen, P C and Bhaskar Rao, H V (1960) Constitution and properties of stabilized dolomites. Other (TMP). CSIR NML. Rao, M R K and Sen, P C and Bhaskar Rao, H V (1961) A Study of Hirri, Hardi and Baraduar dolomites for use in the shaft kilns at Hindustan Steel Limited, Rourkela. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Rao, M R K and Sen, P C and Rao, H V Bhaskar (1960) Constitution and properties of stabilised Dolomites. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Rao, M R K and Sen, P C and Rao, H V Bhaskar (1960) Indian Dolomites: Some aspects of complete stabilisation. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Rao, M R K and Sen, P C and Rao, H V Bhaskar (1958) Mineralogy and Refractory properties of Almora Magnesite. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Rao, M R K and Singh, Rabindar (1956) A Comparative study of Indian and Foreign Silica bricks. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Rao, R G and Ghosh, M and Ganguly, R I and Bose, S C and Sahoo, K L (2020) Mechanical properties and age hardening response of Al6061 alloy based composites reinforced with fly ash. Materials Science and Engineering A, 772 (IF-4.652). p. 138823. Rao, R.K and Sen, P C and Bhaskar Rao, H V (1960) Indian dolomites some of the aspects of complete stabilization. Other (TMP). CSIR NML. Rao , D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2004) Heavy mineral distribution in the beach sands of North coastal Andhra Pradesh and South coastal Tamilnadu. SGAT Bulletin, 5 (2). pp. 1-9. Ravi Kumar, B (2007) Influence of Cold Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. METALLURGICAL AND MATERIALS TRANSACTIONS A, 38A (9). pp. 2085-2094. Ravi Kumar, B (2012) Tensile deformation characteristics of bulk ultrafine-grained austenitic stainless steel produced by thermal cycling. Scripta Materialia, 66 (9). pp. 634-637. Ravi Kumar, B and Patel, N K and Mukherjee, K and Walunj, Mahesh and Mandal, G K and Venugopalan, T (2017) Ferrite channel effect on ductility and strain hardenability of ultra high strength dual phase steel. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 685 (IF-3.094). pp. 187-193. Ray, A and Sivaprasad, S and Chakrabarti, D (2012) A critical grain size concept to predict the impact transition temperature of Ti-microalloyed steels. International of Fracture, 173(2) . pp. 215-222. Ray, Ashok K and Goswami, B (2017) Stiffness in materials engineering. Journal of Metallurgy and Materials Science, 59(2) . pp. 75-83. Ray, Mallar and Pramanick, A K (2016) Optical and Structural Characterization of Reduced Graphene Oxide. Masters thesis, IIEST, Shibpur, Howrah & CSIR NML. Reddy, B V Ramana (2008) Microstructural variations in Al-Cu-Y systems under metastable conditions. Masters thesis, CSIR-NML . Reddy, B V Ramana (2008) Microsturctural variation in Al-Cu-Y Sysytem Under Metastable condition. Masters thesis, CSIR-National Metallurgical Laboratory (NML). Roy, Amritendu and Ghosh, M and Gourkar, H and De, PS (2019) Microstructure, indentation and first principles study of AlCuFeMn alloy. Materialia . Roy, Nilima and Das, Avimanyu and Ray, Ashok K (2015) Simulation and quantification of creep damage. International Journal of Damage Mechanics (IF-1.495). Roy, Rajat K and Dutta, Siuli and Panda, A K and Rajnikanth, V and Das, Swapan K and Mitra, A and Strangwood, M and Davis, C L (2018) Assessment of recovery and recrystallisation behaviours of cold rolled IF steel through non-destructive electromagnetic characterisation. Philosophical Magazine, 98 (1.632). pp. 1933-1944. Roy, Rajat K and Murugaiyan, Premkumar and Bansal, G K and Krishna, K Gopala and Panda, Ashis K (2023) Structural and magnetic behaviors of Fe‑based glassy alloys prepared by industrial raw materials and different processing routes. Journal of Materials Science: Materials in Electronics, 34 (2.8). p. 2218. Roy, Rajat K and Murugaiyan, Premkumar and V, Rajnikanth and Pundir, SPS and Sarkar, Subrata and Panda, Ashis K and Mitra, Amitava (2022) Magnetic Anisotropic Behaviour of CRGO Steels for Quality Assessment. Journal of Nondestructive Evaluation, 41 (2.588). p. 71. SSadana, Y N and Banerjee, T (1956) Structure of Electro-deposited Nickel by X-ray diffraction. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Saha, G.L and Gupta, P K (1960) molding characteristics of quartzite sand sample from Dhanji Hill. Other (TMP). CSIR NML. Saha, G.L and Mohan, Jatinder and Gupte, P K (1960) Moulding characteristics of Quartzite sand sample from Dhanji Hill. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Saha, G.L and Mohan, Jatinder and Gupte, P K (1959) Moulding characteristics of sand from Bhawanagar (Supplied by Rustom and Hornsby). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Saha, G.L and Mohan, Jatinder and Gupte, P K (1959) Moulding characteristics of Silica sand from Yadgiri. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Saha, S and Ghosh , M and Pramanick, A K and Mondal, C and Maity, J (2021) Microstructure and Mechanical Properties of Al/Cu-p/SiCp/TiCp-Based Hybrid Composites Fabricated by Spark Plasma Sintering. Journal of materials engineering and performance . Saha, Sraboni (2009) Does the antibacterial activity of silver depends on its particle size. Masters thesis, CSIR-National Metallurgical Laboratory (NML). Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chhabra, H S and Chowdhury, S G (2021) Evolution of microstructure and deformation behavior in Al–Ni added medium-Mn steel processed through intercritical / cold rolling and annealing. Materials Science and Engineering A, 824 . Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chowdhury, S G (2022) Enhancing the properties of Al-Ni added medium Mn steel by tailoring B2-NiAl precipitates through aging treatment. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 837 . Sahoo, M and Dey, Shobhana (2021) A comparative study on the characterisation and combustion behaviour of high ash coals from two different geographical origins. Fuel, 286(2) (IF-5.578). Sahu, M K and Dutta, Chandan and Ghosh, Arpita and Palit Sagar, S (2017) A Digital Image Processing Tool for size and number density distribution of precipitates in creep exposed material. In: Soft computing for problem solving (SOCPROS 2017), 23-24th December 2017, IIT Bhubaneswar. Sahu, M K and Dutta, Chandan and Ghosh, Arpita and Palit Sagar, S (2019) A Digital Image Processing Tool for Size and Number Density Distribution of Precipitates in Creep-Exposed Material. Soft Computing for Problem Solving . pp. 653-659. Sahu, M K and Swaminathan, J and Bandyopadhyay, N R and Sagar, S P (2017) Effect of Precipitation Morphology on the Second Harmonic Generation of Ultrasonic Wave During Tempering in P92 Steel. Journal of The Institution of Engineers (India): Series D, 98(2) . pp. 211-217. Sahu, M K and Swaminathan, J and Bandyopadhyay, N R and Sagar, S P (2017) Rayleigh Surface wave based non linear ultrasound to assess effect of precipitation hardening during tempering in P92 steel. Materials Science and Engineering: A, 703 (IF- 3.094). pp. 76-84. Sahu, Ranjan K (2020) Some notable experiments of graphene. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 147-153. Sahu, V K and Tripathy, S and Chowdhury, S G and Mandal, G K (2023) On the Unified Interaction Parameter Formalism and Its Application in Critical Reassessment of Pearlitic Transformation in Fe-C-Mn System. Metallurgical and Materials Transactions A -Physical Metallurgy and Materials Science . pp. 3157-3185. Saksena, C P (1966) A Model on the Study of Scales and their Utility as Slag cement with the help of O.R.Techniques. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Saksena, C P (1965) A study of the concentration of Pb in the liquid Pb-Sn alloy system by the correlation and regression analysis. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sambamurthy, E and Dutta, Siuli and Panda, A K and Mitra, A and Roy, Rajat K (2014) Evaluation of post-weld heat treatment behavior in modified 9Cre1Mo steel weldment by magnetic Barkhausen emission. International Journal of Pressure Vessels and Piping, 123-124 (IF-1.078). pp. 86-91. Sameer, Kumar D and Suman, K N S and Poddar, Palash (2017) Effect of particle morphology of Ni on the mechanical behavior of AZ91E-Ni coated nano Al2O3 composites. Materials Research Express, 4(6) (IF-1.068). Sankara Narayanan, T S N (2011) Graphene - Its role in energy storage devices. [Presentation Slide] (Unpublished) Sankara Narayanan, T S N (2011) Tin plated contacts - Problems due to fretting corrosion and whisker growth. [Presentation Slide] (Unpublished) Sankara Narayanan, T S N and Krishnaveni, K and Seshadri, S K (2003) Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Materials Chemistry and Physics, 82 (3). pp. 771-779. Sankara Narayanan, T S N and Satendra, Kumar (2010) Evaluation of the fretting corrosion behaviour of surface modified CP-Ti for biomedical applications (OLP-0126). Exploratory (OLP). NML, Jamshedpur. (Submitted) Sankara Narayanan, T S N and Satendra, Kumar (2011) Studies on the Electrochemical Behaviour of Ti-Mo Alloys In Fluoride Medium to assess their Suitability for Dental Implant Applications (OLP-0073). Exploratory (OLP). NML, NML, Chennai Centre. (Submitted) Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted) Sankara Narayanan, T S N and Seshadri, S K (2011) Electro - and electroless deposited composite coatings: preparation, characteristics and applications. In: Encyclopedia of composites. Wiley, Hoboken, N J. Sankara Narayanan, T S N and Seshadri, S K (2004) Formation and characterization of borohydride reduced electroless nickel deposits. Journal of Alloys and Compounds, 365 (1-2). pp. 197-205. Santosh, R and Das, Goutam and Kumar, S and Singh, P K and Ghosh, M (2018) Experimental and Computational Investigation of Structural Integrity of Dissimilar Metal Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions A, 49A(6) (IF-1.874). pp. 2099-2112. Santosh, R and Das, Swapan K and Das, Goutam and Korody, J and Kumar, S and Singh, P K and Ghosh, M (2016) Three-Dimensional Thermomechanical Simulation and Experimental Validation on Failure of Dissimilar Material Welds. Metallurgical and Materials Transactions A, 47A(7) (IF-1.874). pp. 3511-3521. Sarkar, Samata (2008) Synthesis & Characterisation of Silicon nano Particles. Masters thesis, Bengal Engineering and Science Universiy, Shibpur. Sastry, P R and Bhandary, V S and Gupta, P K (1966) Moulding characteristics of Kanchanpur yellow sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sastry, P R and Bhandary, V S and Gupta, P.K (1965) Moulding characteristics of shertallai silica sand. Other (TMP). CSIR NML, Jamshedpur. Sastry, P R and Bhandary, V S and Gupte, P K (1965) Investigation on Rajendra Silica sand No.4 received from M/s Rajendra Silica works Sankargarh, Allahabad. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sastry, P R and Bhandary, V S and Gupte, P K (1964) Investigation on Rajendra Silica Sand No. III. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sastry, P R and Bhandary, V S and Gupte, P K (1965) Moulding characteristics of Bhandhana sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sastry, P R and Bhandary, V S and Gupte, P K (1966) Moulding characteristics of Kanchanpur white sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sastry, P R and Bhandary, V S and Gupte, P K (1966) Moulding Characteristics of Maharashtra Silica Sand (MSS.4). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sastry, P R and Bhandary, V S and Gupte, P K (1965) Moulding characteristics of manduri glasss sand. Other (TMP). CSIR NML, Jamshedpur. Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai. Satendra, Kumar and Sankara Narayanan, T S N (2011) Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium. Journal of Applied Electrochemistry, 41 . pp. 123-127. Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of CP Ti — An electrochemical and structural characterization. Materials Characterization, 6 1 . pp. 589-597. Sen, P C and Rao, M R K and Bhaskar Rao, H V (1961) Refractory properties of sea –water magnesia produced By M/s Tata chemicals Mithapur. Other (TMP). CSIR NML. Sen, P C and Rao, M R K and Rao, H V Bhaskar (1960) Indian Dolomites: A raw materials study. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sen, P.C and Rao, M R K and Bhaskar Rao, H V (1960) Indian dolomite – A raw material study. Other (TMP). CSIR NML. Sen, Prithwis C and Ramakrishna Rao, M and Dutt, Ashimesh and Bhaskar Rao, H V (1965) Occurrence and Refractory properties of Rajasthan Magnesite. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sengupta, B L and Banerjee, S K and Narayanan, P I A (1966) Sintering of Iron ore fines from Bellary Hospet Area. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Seshu Kumar, A and Khadeer, S A and Rajinikanth, V and Pahari, Santanu and Kumar, B Ravi (2021) Evaluation of bond interface characteristics of rotary friction welded carbon steel to low alloy steel pipe joints. Materials Science and Engineering A, 824 . Shah, Minal and Bakshi, Subhankar Das (2018) Three body abrasive wear of carbide-free bainite martensite and bainite-martensite structure of similar hardness. Wear, 402–403 (IF-2.531). pp. 207-215. Shah, N V and Rao, H V Bhaskar (1960) Investigation of the suitability of Asbestos from Singhbhum District for Industrial purposes. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Shaik, A A and Kashyap, B P and Chauthai, A (2016) Identification of favorable hot working condition for Ti-6 Al-4V. Journal of Metallurgy and Materials Science, 58(1) . pp. 9-18. Shaik, Saida and Chakravarty, S and Mishra, P R and Sahu, Rina and Chakravortty, K (2019) Caking Ability Tests for Coal Blends in Process to Utilize the Indian Origin Coals. Transactions of the Indian Institute of Metals, 72(12) (IF-1.176). pp. 3129-3137. Sharma, C and Parmanik, S (1967) Plastic laminated sheet Steel and Aluminium. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Sharma, Meenakshi (2010) Hydrophillic coating on Glass Substrate. Masters thesis, CSIR-National Metallurgical Laboratory (NML). Sharma, Sailaja and Kumar, B Ravi and Kashyap, B P and Prabhu, N (2018) Effect of stored strain energy heterogeneity on microstructure evolution of 90% cold rolled AISI 304L stainless steel during interrupted annealing treatment. Materials Characterization, 140 (IF-2.714). pp. 72-85. Sharma, Sailaja and Kumar, B Ravi and Kashyap, B P and Prabhu, N (2018) Effects of concurrent strain induced martensite formation on tensile and texture properties of 304L stainless steel of varying grain size distribution. Materials Science and Engineering: A Structural materials properties microstructure, 725 (IF-3.094). pp. 215-227. Sharma, U C and Krishnan, R M and Nijhawan, B R (1956) Coke for Cupola-with particular reference to Indian conditions. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sharma, U C and Krishnan, R M and Nijhawan, B R (1955) Moulding characteristics of Allahabad Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sharma, U C and Nijhawan, B R (1956) Bonding characteristics of Bentonite ‘R’ received from Tata Locomotive & Engineering Co., Ltd., Jamshedpur. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sharma, U C and Nijhawan, B R (1956) Moulding characteristics of Jubbulpore sand received from M/s. Mukand Iron & steel Works Ltd. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sharma, U C and Nijhawan, B R (1956) Some studies of the effect of Barium Chloride additions to Copper. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sheethal, S (2013) Evaluation and optimization of electromagnetic stirring (EMS) parameters for continuously cast high carbon billet quality using ultrasonic c-scan imaging. Masters thesis, NIT, Trichy. Shekhar, Saurabh and Kumari, V and Sinha, S and Mishra, D and Agarwal, A and Sahu, K K (2022) Petro-Mineralogical and Geochemical Evaluation of Glauconitic Rocks of the Ukra Member (Bhuj Formation), Kutch Basin, India. Clays and Clay Minerals, 70(1) . pp. 135-153. Shekhar, Saurabh and Mishra, D and Agrawal, A and Sahu, K K (2017) Physical and chemical characterization and recovery of potash fertilizer from glauconitic clay for agricultural application. Applied Clay Science, 143 (IF-3.101). pp. 50-56. Shi, D and Bhattacharya, S and Nayar, S and Webster, T J (2016) Optimizing superparamagnetic iron oxide nanoparticles as drug carriers using an in vitro blood-brain barrier model. International Journal Of Nanomedicine, 11 (IF- 4.3). Shravan Kumar, K and Biswas, Krishanu (2013) Effect of thiourea on grain refinement and defect structure of the pulsed electrodeposited nanocrystalline copper. Surface and Coatings Technology, 214 (IF-1.867). pp. 8-18. Shravan Kumar, K and Biswas, Krishanu and Balasubramaniam, R (2011) Mechanism of Film Growth of Pulsed Electrodeposition of Nanocrystalline Copper in Presence of Thiourea. Journal of Nanoparticle Research, 13 (11). pp. 6005-6012. Shyamsunder, M T (2011) Advances in Electromagnetic NDE and its Applications to the steel and allied industries. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Siddique, A B and Mukhuti, K and Choudhary, S and Pramanick, A K and Hossain, S M and Ray, M (2022) Critical investigation of up-conversion and dual emission from nitrogen functionalized graphene quantum dots. Journal of Luminescence, 244 . Siddique, A B and Pramanick, A K and Chatterjee, S and Ray, M (2018) Amorphous Carbon Dots and their Remarkable Ability to Detect 2,4,6-Trinitrophenol. Scientific Reports, 8 (IF-4.525). p. 9770. Siddique, A B and Singh, V P and Chatterjee, S and Pramanick, A K and Ray, M (2018) Facile synthesis and versatile applications of amorphous carbon dot. In: International Conference on Functional Nanomaterials (IC-FNM), Sept 28-29, 2016, Howrah, INDIA. Singh, Autar and Bhandary, V S and Gupte, P K (1965) Investigation of the U.B.I.(Kashmir) Bentonite received from Directorate of Mining and Geology ,Jammu and Kashmir Government. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, Avtar and Bhandary, V S and Gupte, P K (1963) Investigation on the S.B.I. (Kashmir) Bentonite received from Director of Mining and Geology, Jammu and Kashmir Govt. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, Avtar and Chirayath , A T and Bhandary, V S and Gupte, P K (1963) Investigation on P.B.I. Bentonite Kashmir (Jammu & Kashmir State). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, Charu and Tiwari, S K and Singh, R (2018) Deposition and characterization of electroless Ni on fluoride free pretreated AZ91 magnesium alloy. Materials Today-Proceedings, 5(9) (IF-0.837). pp. 17312-17319. Singh, H P and Bhandary, V S and Gupte, P K (1967) Moulding characteristics of Silica Sand Sample No -1 from Kanhan (Maharashtra). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. singh, H.P and Bhandary, V S and Gupte, P K Moulding characteristics of Maharashtra silica sand . (M-s-s.5). Other (TMP). CSIR NML. Singh, K K and Mondal, N and Choudhary, R B and Mishra, A K and Prasad, R R and Avtar, Ram and Mukerjee, D and Bhattacharya, G and Biswasroy, J K and Singh, Wakil (2011) Detection of Defects on Cold Rolling Mill (CRM) Rolls with Ultrasonic and Eddy Current Flaw Dectors. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries -NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Singh, M and Das, A and Venugopalan, T and Mukherjee, K and Walunj, Mahesh and Nanda, T and Ravi Kumar, B (2018) Impact of Martensite Spatial Distribution on Quasi-Static and Dynamic Deformation Behavior of Dual-Phase Steel. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49A(2) (IF-3.094). pp. 463-475. Singh, Navin Kumar and Pramanick, A K (2007) Study of cementite and ferrite interface by AFM. Training Report (TR). CSIR-NML, Jamshdpur. (Unpublished) Singh, P K and Arora, Punit and Bhasin, V and Vaze, K K and Pukazhendi, D M and Gandhi, P and Raghava, G and Sivaprasad, S and Tarafder, S (2011) Fatigue studies on stainless steel piping materials and components: Indian AHWR. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India. Singh, R K and Sahu, J K (2019) Influence of hold type and duration on cyclic deformation behaviour of IN740H. Materials Science and Technology, 35(4) . pp. 488-499. Singh, R K and Sahu, J K and Tarafder, S (2016) Strain rate effect on cyclic deformation behaviour of advanced ultra-super critical boiler grade wrought Ni-based superalloy IN740H at 760 °C. Materials Science and Engineering A, 658 (IF-3.094). pp. 272-279. Singh, R S and Mohan, Jatinder (1958) Investigation on Londha sands. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, R S and Mohan, Jatinder and Gupte, P K (1958) Investigation on Bhavnagar Sands. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, R S and Somayajulu, B V (1958) Investigation on Vengurla Silica sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, R S and Somayajulu, B V (1958) Moulding characteristics of Adjoy river sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, R S and Somayajulu, B V and Gupte, P K (1958) Moulding characteristics of Hydrogen Silica Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, R S and Somayajulu, B V and Nijhawan, B R (1958) Moulding characteristics of Brahmani river sands from Rourkela, Orissa. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, R S and Somayajulu, B V and Nijhawan, B R (1958) Moulding characteristics of Oyaria Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, Raghuvir (2022) Integrity of Additively Manufactured Alloys and Component to Environmental Degradation. Journal of Materials Engineering and Performance . Singh, Raghuvir and Dahotre, N B (2005) Tribology of laser modified surface of stainless steel in physiological solution. Journal of Materials Science, 40 . pp. 5619-5626. Singh, Raghuvir and Das, Goutam and Mahato, B and Singh, P K (2017) Aging Degradation of Austenitic Stainless Steel Weld Probed by Electrochemical Method and Impact Toughness Evaluation. Metallurgical and materials transactions a-physical metallurgy and materials science, 48A(3) (IF-1.874). pp. 1064-1077. Singh, Raghuvir and Das, Goutam and Suman, Satyarth and Singh, P K (2008) Response of Weld Joints in Stainless Steel 304LN Pipe to Low Temperature Sensitization. In: IIW- IC-2008 Chennai, 8-10 January, 2008, Chennai. Singh, Raghuvir and Gaur, B and Singh, A K (2001) Impact of Filtrate Recycling on Corrosion of Stainless Steels in Hypochlorite Solutions. Journal of Electrochemical Society of India, 50 (1). pp. 21-26. Singh, Savinder and Bhandary, V S and Gupte, P K (1967) Moulding characteristics of Silica Sand Sample No-2 from Kanhan. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Singh, Savinder and Bhandary, V S and Gupte, P K (1978) Moulding Characteristics of Sand Samples Received from Messrs Steelsworth Private Limited, Assam. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Singh, V and Das, Suchandan K (2016) Thermo-fluid Mathematical Modeling of Steel Slab Caster: Progress in 21st Century. Isij International, 56(9) (IF-1.11). pp. 1509-1518. Singla, Rashmi and Senna, Mamoru and Mishra, T and Alex, T C and Kumar, Sanjay (2022) High strength metakaolin/epoxy hybrid geopolymers: Synthesis, characterization and mechanical properties. Applied Clay Science, 221 . Sinha, Vibhash Chandra (2009) Biomimetic hydroxyapatite coating on titanium alloys for biomedical application. Masters thesis, CSIR-National Metallurgical Laboratory (NML). Sinhababu, S K and Bandary, V S and Gupte, P K (1964) Moulding characteristics of Rajendra Silica Sand No.I. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sinhababu, S K and Bhandary, V S and Gupta, P K (1965) Moulding characteristics of Godavari river sand No.2. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sinhababu, S K and Bhandary, V S and Gupte, P K (1966) Moulding characteristics of Bhainsahi Glass sand (Lower unit)yellow. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sinhababu, S K and Bhandary, V S and Gupte, P K (1965) Moulding characteristics of Bhainsahi Glass Sand (Lower Unit, White). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sinhababu, S K and Bhandary, V S and Gupte, P K (1965) Moulding characteristics of Bhainsahi glass sand (Upper Unit). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sinhababu, S K and Bhandary, V S and Gupte, P K (1965) Moulding characteristics of Godavari river sand No.1. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sinhababu, S K and Bhandary, V S and Gupte, P K (1966) Moulding characteristics of Maharashtra Silica sand: Sample No. MSS-7. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sinhababu, S K and Bhandary, V S and Gupte, P K (1965) Moulding characteristics of pachpahra sand. Other (TMP). CSIR NML, Jamshedpur. Sinhababu, S K and Bhandary, V S and Gupte, P K (1964) Moulding characteristics of Rajendra Silica Sand No.2. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Comparison of the fretting corrosion behaviour of Ti-6Al-4V alloy and CP-Ti IN ringer’s solution. Tribology - Materials, Interfaces and Surfaces, 5(4) (1.553). pp. 158-164. Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Fretting corrosion behaviour of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions. Wear, 270 . pp. 317-324. Sivaprasad, S and Paul, Surajit Kumar and Das, Arpan and Narasaiah, N and Tarafder, S (2010) Cyclic plastic behaviour of primary heat transport piping materials: Influence of loading schemes on hysteresis loop. Materials Science and Engineering: A, 527 (26). pp. 6858-6869. Somayajulu, B V and Mohan, Jatinder and Bhatnagar, S S (1961) Some aspects of Silicate bonding with and without CO2. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Somayajulu, B V and Nijhawan, B R (1956) Bonding characteristics of Rajasthan Bentonite from M/s. Tata Locomotive & Engineering Company Ltd. Tatanagar. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Somayajulu, B V and Nijhawan, B R (1956) Moulding characteristics of Hardwar sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Somayajulu, B V and Nijhawan, B R (1956) Moulding characteristics of Madras Silica sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Srikantiah, B S and Nijhawan, B R (1949) Nodular Cast Iron. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Srinivasan, S R and Bhatnagar, P P (1961) Studies on the decomposition characteristics of Amjhore pyrites. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Srivastava, V C and Mandal, R K and Ojha, S N (2001) Microstructural evolution during spray forming of an Al-18Si alloy. Journal of Materials Science Letters, 20 . pp. 27-29. Srivastava, V C and Ojha, S N (2006) Effect of aspiration and gas–melt configuration in close coupled nozzle on powder productivity. Powder Metallurgy, 49 (3). pp. 213-218. Srivastava, V C and Ojha, S N (2004) Microstructure and wear characteristics of spray formed and hot extruded Al–Si alloys. Materials Science and Technology, 20 . pp. 1632-1638. Srivastava, V C and Sahoo, K L (2007) Processing, stabilization and applications of metallic foams. Art of science. Materials Science - Poland, 25 (3). pp. 735-753. Srivastava, V C and Scheider, A and Uhlenwinkel, V and Ojha, S N and Bauckhage, K (2004) Age-hardening characteristics of Cu–2.4Ni–0.6Si alloy produced by the spray forming process. Journal of Materials Processing Technology, 147 . pp. 174-180. Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of thermomechanical treatment on spray formed Cu–Ni–Si alloy. Materials Science and Technology, 20 . pp. 839-848. Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Rosenauer, A and Zoch, H -W (2009) Novel microstructural characteristics and properties of spray formed Al-RE-TM based alloys. In: International conference on Spray forming, 2009, September 7-9, 2009, Bremen, Germany. Srivastava, V C and Uhlenwinkel, V (2013) Application Oriented New Materials by Spray Forming. The Banaras Metallurgist, 18 . pp. 21-29. Srivastava, V C and Uhlenwinkel, V and Schulz, A and Zoch, H -W and Mukhopadhyay, N K and Ghosh Chowdhury, S (2008) Synthesis of single phase i-AlCuFe bulk quasicrystal by spray forming. Zeitschirft fuer Kristallographie, 223 . pp. 711-715. Srivastava, V C and Upadhyay, A and Ojha, S N (2001) Microstructural features induced by spray forming of a ternary Pb–Sn–Sb alloy. Bulletin of Materials Science, 23 (2). pp. 73-78. Starman, S and Matz, V (2011) Automated System for Crack Detection using Infrared Thermographic Testing. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Starman, S and Matz, V (2011) Real Implementation of Ultrasonic Phased Array Technology Using Advanced Signal Processing Algorithms. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Subramanian, M and Bhatnagar, P P (1958) Reducibility of Salem Magnetite ore. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Subramanian, M and Bhatnagar, P P (1960) Studies on the reducibility of beneficiated TISCO Iron ores. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Subramanian, M and Mathur, S B and Bhatnagar, P P (1965) Reducibility of Kiriburu Iron ores and Sinters. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Subramanian, M and Mathur, S B and Bhatnagar, P P (1965) Reducibility of Lumpy iron ores from Messrs Salgaocar E Irmao Ltd., Goa. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Subramanian, M and Mathur, S B and Bhatnagar, P P (1965) Reducibility of Specular Hematite Iron ore samples of Nathara –Ki Pal Deposits, Rajasthan. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Subramanian, M and Sankaran, C and Bhatnagar, P P (1962) Reducibility of Bolani iron ores and Sinters. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Subramanian, N N and Rao, D P and Narayanan, P I A (1956) Beneficiation of low grade Manganese ore from Miragpur Mines, Balaghat, Madhya Pradesh. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Sundara Bharathy , R and Venugopalan, T and Ghosh, M (2023) Efect of Precipitation Characteristics on Mechanical Properties and Stretch Flangeability of Nano‑Dispersion Strengthened High Strength Ferritic Steel. Metallography, Microstructure & Analysis . Surreddi, K B and Srivastava, V C and Scudino, S and Sakaliyska, M and Uhlenwinkel, V and Kim, Joon-Soo and Eckert, J (2010) Production of high-strength Al85Y8Ni5Co2 bulk alloy by spark plasma sintering. Journal of Physics: Conference Series, 240 . 012155. TTandon, D S and Banerjee, T (1954) Some experiments on plating on Aluminium using an Iron inter-layer. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Tarafder, Mita and Sujata, M and Ranganath, V R and Tarafder, S and Bhaumik, S (2012) Microstructural damage evaluation in Ni-based superalloy gas turbine blades by fractal analysis. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22-25 January 2012, Mamallapuram, India. Tarafder, Mita and Sujata, M and Ranganath, V R and Tarafder, S and Bhumik, S K (2013) Microstructural Damage Evaluation in Ni-based Superalloy Gas Turbine Blades by Fractal Analysis. Procedia Engineering, 55 . pp. 289-294. Tarafder, S (2010) Technology for Engineering Critical Assessment: Project Completion Report. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted) Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2001) Specimen Size and Constraint Effects on J-R Curves of SA333 Gr.6 Steel. Sponsored (SSP). CSIR-NML, Jamshedpur, Jamshedpur. Tarafder, S and Sivaprasad, S and Ranganath, V R (2007) Comparative assessment of fatigue and fracture behaviour of cast and forged railway wheels. Fatigue and Fracture of Engineering Materials and Structures, 30 (9). pp. 863-876. Thanseer, P M and Metya, A K and Palit Sagar, S (2017) Development of a Non-collinear Nonlinear Ultrasonic-Based Technique for the Assessment of Crack Tip Deformation. Journals of Materials Engineering and Performance, 26(6) (IF-1.331). pp. 2632-2639. Tome, Sylvain and Nana, A and Kaze, C R and Djobo, J N Y and Alomyri, T and Kamseu, E and Etoh, Marie-Annie and Etame, Jacques and Kumar, Sanjay (2021) Resistance of Alkali-Activated Blended Volcanic Ash-MSWI-FA Mortar in Sulphuric Add and Artificial Seawater. Silicon . Tripathy, S and Chowdhury, S G (2021) On the through-process texture evolution assessment in grain oriented Fe-3 wt% Si steel produced by a novel directional inoculation technique. Scientific Reports, 11(1) . VVaish, Ashok Kumar (2019) Spectrum of engineering materials for sustainable development. Journal of Metallurgy and Material Science, 61(1) . pp. 39-50. Varshney, A and Sangal, S and Gouthama, and Pramanick, A K and Mondal, K (2017) Microstructural evidence of nano-carbides in medium carbon high silicon multiphase steels. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 708 (IF-3.094). pp. 237-247. Vasumathi, N and Vijaya Kumar, T V and Ratchambhigai, S and Subba Rao, S and Bhaskar Raju, G (2015) Flotation studies on low grade graphite ore from Eastern India. International Journal of Mining Science and Technology, 25(3) . pp. 415-420. Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G and Prasad, Kopparthi (2015) Pilot scale column flotation studies on the beneficiation of coal fines. In: International seminar on Mineral Processing Technology, (MPT 2014) in Andhra University, 12-14 March 2015, Andhra University, Vishakapatnam, Andhra Pradesh.. Venkatraman, B (2011) Advanced NDE and QA for Ensuring Quality and Integrity of Critical Components in Nuclear Industry. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Verma, B N and Kumar, Sanjay and Joarder, B (2011) Improvement in New Grades of Work Roll for Hot Strip Mill through NDE. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Vijaya Kumar, T V and Prabhakar, S and Bhaskar Raju, G and Rao, D S and Subba Rao, S and More, P (2005) Semicommercial scale studies using flotation column and dual extraction column on iron ores of Goa, India. Journal of Minerals and Materials characterization and Engineering, 4 (2). pp. 113-124. Vijayanarayanan , K S and Bhandary, V S and Gupte, P K (1965) Moulding characteristics of Zircon Sand. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Vijayanarayanan , K S and Gupta, R N P and Naidu, N V (1968) Moulding Characteristics of Natural Moulding Sand Received from M/S Model Foundry, Madras-32. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Vijayanarayanan , K S and Naidu, N V (1967) Moulding characteristics of Sand received from M/s. Unicorn (P) Ltd., Madras. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Vijayanarayanan , K S and Naidu, N V and Gupta, R N P (1968) Moulding Characteristics of Natural Moulding Sand Received from M/S Supertech Castings Ltd. Madras. Other (TMP). CSIR- NML, Jamshedpur, Jamshedpur,. Vijayanaryanan, K S and Bhandary, V S and Gupte, P K (1963) Moulding characteristics of Madras Silica sand -I. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Vijayanaryanan, K S and Naidu, N V Moulding Characteristics of G.S.I Sand (1) Received from Geological Survey of India. Other (TMP). CSIR NML, Jamshedpur. Vijayanaryanan, K S and Naidu, N V (1967) Moulding characteristics of G.S.I Sand (II)received from Geological Survey of India. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Vijayannarayan, K S and Naidu, N V (1966) Moulding characteristics of Silica sand from Shankargarh Central Railway. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Vijayannarayan, K.S and Bhandary, V S and Gupte, P K (1963) Moulding characteristics of Madras Silica sand –II. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. WWackermann, Ken and Kumar Sahu, Jitendra and Christ, H J (2010) 475oC Embrittlement and Room Temperature Fatigue of Duplex Stainless Steel. In: Proceedings of 18th European Conference on Fracture of Materials and Structures"Fracture of Mateials and Structures from Micro to Macro Scale, 2010, DVM, Berlin. Wackermann, Ken and Sahu, J K and Christ, H J (2010) 475°C Embrittlement and Room Temperature Fatigue of Duplex Stainless Steel. In: Proceedings of 18th European Conference on Fracture of Materials and Structures "Fracture of Materials and Structures from Micro to Macro Scale", D. Klingbeil, M. Vormwald, K.-G. Eulitz (Hg), 2010, DVM, Berlin. YYeon, J S and Gupta, N and Bhattacharya, P and Park , H S (2022) A New Era of Integrative Ice Frozen Assembly into Multiscale Architecturing of Energy Materials. Advanced Functional Materials, 32(19) . ZZhou, L and Liu, J and Hao, X J and Strangwood, M and Peyton, A J and Balamurugan, S and Morris, P F and Davis, C L (2011) Quantification of the effect of changes in steel microstructural parameters on EM sensor signals. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. |
