Items where Year is 2009

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | J | K | M | N | P | R | S | T | V
Number of items: 174.

A

Abhilash, and Singh, S and Mehta, K D and Kumar, Vinay and Pandey, B D and Pandey, V M (2009) Dissolution of uranium from silicate-apatite ore by Acidithiobacillus ferrooxidans. Hydrometallurgy, 95 (1-2). pp. 70-75.

Agarwal, Sanjay and Sahu, K K and Jana, R K and Mehrotra, S P (2009) Recovery of Cu, Ni, Co and Mn from sea nodules by direct reduction smelting. In: Proceedings of the Eighth (2009) ISOPE Ocean Mining Symposium , 20-24 September 2009, Chennai, India.

Agarwal, Sanjay and Sahu, K K and Jana, R K and Mehrotra, S P (2009) Studies on recovery of Ni, Co & Cu from polymetallic sea nodules by direct reduction smelting. In: Pyrometallurgy of Nickel and Cobalt 2009, 23- 26 AUGUST 2009, SUDBURY, ONTARIO, Canada.

Agrawal, A and Bagchi, D and Kumari, S and Pandey, B D (2009) An Overview of Process Options and behavioral Aspects of the Copper values recovered from the Copper Bleed Stream of a Copper Smelter developed at the National Metall-urgical Laboratory. Mineral Processing and Extractive Metallurgy (Trans. IMM C) . pp. 136-162.

Agrawal, A and Kumari, S and Sahu, K K (2009) Iron and copper recovery/removal from industrial wastes: A review. Industrial & Engineering Chemistry Research, 48 (13). pp. 6145-6161.

Agrawal, A and Sahu, K K (2009) An overview of the recovery of acid from spent acidic solutions from steel and electroplating industries. Journal of Hazardous Materials, 171 (1-3). pp. 61-75.

Agrawal, A and Sahu, K K (2009) Value Addition to Sulfate Waste Pickle Liquor of Steel Industry Using Hydrometallurgical Processes. Metallurgical and Materials Transactions B, 40 (6). pp. 877-885.

Aich, S and Das, D and Al-Omari, I A and Alagarsamy, P and Ghosh Chowdhury, S and Chakraborty, M and Shield, J E and Sellmyer, D J (2009) Microstructures and magnetic properties of rapidly solidified Ni54Fe27-2xGa19+2x ferromagnetic Heusler alloys. Journal of Applied Physics, 105 (7). 07A943.

Alex, T C and Kumar, Rakesh and Kailath, A J and Roy, S K and Mehrotra, S P (2009) Mechanically Induced Reactivity in Boehmite (y-AlOOH). In: 63rd Annual Technical Meeting of The Indian Institute of Metals , Nov. 16-17, 2009, IIM, Kharagpur, Kolkata.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2009) Mechanical Activation of Boehmite produced by Thermal Transformation of Gibbsite. In: The fourth Asian Particle Technology Symposium (APT 2009), September 14-16, 2009, Hotel Ashok, Delhi.

Ananda Kumar, S and Meenakshi, K Shree and Narasimhan, B R V and Srikanth, S and Arthanareeswaran, G (2009) Synthesis and characterization of copper nanofluid by a novel one-step method. Materials Chemistry and Physics, 113 . pp. 57-62.

B

Banerjee, G and Pal, T K and Das, Goutam (2009) Performance Evaluation of Resistance Spot Welded Interstitial Free Steel Under Cryogenic Conditions. Journal of Testing And Evaluation, 37 (6). pp. 566-572.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2009) Corrosion resistance of electroless Ni–low B coatings. Transactions of the Institute of Metal Finishing, 87 (4). pp. 221-224.

Bhaskar Raju, G (2009) Recent developments in flotation for the beneficiation of lowgrade finely disseminated ores. Mining Engineers Journal (December). pp. 11-23.

Bhaskar Raju, G and Karuppiah, M T and Latha, S S and Priya, D L and Parvathy, S and Prabhakar, S (2009) Electrochemical pretreatment of textile effluents and effect of electrode materials on the removal of organics. Desalination, 249 (1). pp. 167-174.

Bhattacharyya, A S and Das, G C and Mukherjee, S and Mishra, Suman K (2009) Effect of radio frequency and direct current modes of deposition on protective metallurgical hard silicon carbon nitride coatings by magnetron sputtering. Vacuum, 83 (12). pp. 1464-1469.

Bhattacharyya, A S and Mishra, Suman K and Mukherjee, Surojit and Das, G C (2009) A comparative study of Si–C–N films on different substrates grown by RF magnetron sputtering. Journal of Alloys and Compounds, 478 (1-2). pp. 474-478.

Bhattamishra, A K and Banerjee, M K (2009) Effect of temperatures of corrosive medium on corrosion of a high strength aluminium alloy. Journal of Metallurgy and Materials Science, 51 (1). pp. 43-46.

Bose, S C and Roy, Nilima and Ghosh, R N (2009) Probabilistic creep life assessment of austenitic stainless steel. In: NMD - ATM 2009, November 14, 2009 to November 17, 2009, Science City Complex,Kolkata, India.

C

Chakraborty, M and Ghosh, M and Das, S K and Mahato, B (2009) Synthesis and characterization of superparamagnetic Co & CoNi particles. In: TMS 2009 138th Annual Meeting & Exhibition - Supplemental Proceedings, Feb, 2009, TMS.

Chattoraj, I (2009) Hydrogen embrittlement: Recent Indian research and perspectives. Corrosion Reviews, sp. Iss.sl suppl . pp. 181-211.

Chaudhary, P N (2009) Extractive Metallurgy. In: A Continuing Education Course on Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur.

Chaudhuri, S and Ghosh, R N (2009) Creep Behavior Of 2.25cr1mo Steel-Effects Of Thermal Ageing And Pre-Strain. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing , 510-11 (sl. lss). pp. 136-141.

Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S and Nair, C M and Murthy, K V G K (2009) Adsorption Of Oleate On Fluorite Surface As Revealed By Atomic Force Microscopy. International Journal of Mineral Processing, 90 (1-4). pp. 101-104.

D

Das, A (2009) Mineral Processing. In: A Continuing Education Course for Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur.

Das, Arpan and Das, Swapan K and Tarafder, S (2009) Correlation of Fractographic Features with Mechanical Properties in Systematically Varied Microstructures of Cu-Strengthened High-Strength Low-Alloy Steel. Metallurgical and Materials Transactions A, 40 (13). pp. 3138-3146.

Das, Arpan and Tarafder, S (2009) Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel. International Journal of Plasticity, 25 (11). pp. 2222-2247.

Das, Avimanyu and Sarkar, B and Biswas, P and Roy, Subrata (2009) Performance prediction of floatex density separator in processing iron ore fines – a relative velocity approach. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 118 (2). pp. 78-84.

Das, Avimanyu and Sarkar, B and Mehrotra, S P (2009) Prediction of separation performance of Floatex Density Separator for processing of fine coal particles. International Journal of Mineral Processing, 91 (1-2). pp. 41-49.

Das, Avimanyu and Vidyadhar, A and Dey, S K (2009) Modeling of Fine Coal Processing in a Teeter Bed Separator. In: International Seminar on Mineral Processing Technology (MPT-2009) , October 28-30, 2009, IMMT, Bhubaneshwar.

Das, Avimanyu and Vidyadhar, A and Mehrotra, S P (2009) A novel flowsheet for the recovery of metal values from waste printed circuit boards. Resources, Conservation and Recycling, 53 (8). pp. 464-469.

Das, Goutam and Das, Mousumi and Sinha, Satish and Gupta, K K and Chakravarty, S and Ray, Ashok K (2009) Characterization of cast stainless steel weld pools by using ball indentation technique. Materials Science and Engineering: A, 513-514 . pp. 389-393.

Das, K P and Ganguly, S and Chattopadhyay, P P and Tarafder, S and Bandopadhyay, N R (2009) Exploring The Possibilities Of Development Of Directly Quenched TRIP-Aided Steel By The Artificial Neural Networks (ANN) Technique. Materials and Manufacturing Processes, 24 (1). pp. 68-77.

Das, Swapan K and Chatterjee, S and Tarafder, S (2009) Effect of microstructures on deformation behaviour of high-strength low-alloy steel. Journal of Materials Science, 44 (4). pp. 1094-1100.

Dash, S (2009) Extraction of chitosan from bioresources and its application in biosorption. Masters thesis, National Metallurgical Laboratory (NML).

Dey, Shobhana and Allison, S and Franzidis, J.-P and Yorath, G and Harris, P J and O'Connor, C T (2009) An investigation into the effect of combinations of various reagents and pH regimes on the flotation of pyrrhotite. In: Flotation ’09, 2009, Cape Town, South Africa.

Dey, Shobhana and Franzidis, J.-P and Harris, P J (2009) New approach for quantification of sulphydryl collector- mixture on sulphide mineral surface. In: International Seminar on Mineral Processing Technology (MPT-2009) , October 28-30, 2009, IMMT, Bhubaneshwar.

Dhal, B and Abhilash, and Mehta, K D and Pandey, B D (2009) Biological remediation of trivalent chromium from effluents. In: International conference of Non-ferrous metals 2009, July 10-11, 2009, Bhubaneswar.

Director, NML (2009) Annual Report 2008-2009. NML, Jamshedpur. ISBN 0972-4273

E

Elango, Adirajan and Nandi, Debkumar and Vinayagam, Jayaraman and Arumugam, Meyyappan and Pal, Churala and Dey, Sumit and Giri, Venkatachalam Sesha and Mukherjee, Joydeep and Garai, Subhadra and Jaisankar, Parasuraman (2009) Antibacterial Activity and Anticorrosive Efficiency of Aqueous Methanolic Extract of Artemisia pallens (Asteraceae) and its major Constituent. Journal of Complementary and Integrative Medicine, 6 (1). pp. 1-11.

G

Ghosh, Arpita and Das, T K and Mandal, S K and Mohan, B M (2009) Analytical Structure and Stability Analysis of a Fuzzy Two-Term Controller with Multi-Fuzzy Sets. In: Automation, Robotics & Control Systems, July 13-16, 2009, Orlando, Florida, USA.

Ghosh, M and Kar, Abhijit and Das, Swapan K and Ray, Ajoy K (2009) Aging Characteristics of Sn-Ag Eutectic Solder Alloy with the Addition of Cu, In, and Mn. Metallurgical and Materials Transactions A, 40A . pp. 2369-2376.

Ghosh, Swati and Kain, V and Ray, A and Roy, H and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Deterioration in Fracture Toughness of 304LN Austenitic Stainless Steel Due to Sensitization. Metallurgical and Materials Transactions A, 40 (12). pp. 2838-2949.

Ghosh Chowdhury, S (2009) Physical Metallurgy. In: A Continuing Education Course on Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur.

Ghosh Chowdhury, S and Pereloma, Elena V and Santos, D B (2009) Corrigendum to “Evolution of texture at the initial stages of continuous annealing of cold rolled dual-phase steel: Effect of heating rate” [Mater. Sci. Eng.: A 480 (2008) 540–548]. Materials Science and Engineering: A , 525 (1-2). 211- .

Ghosh Chowdhury, S and Sahu, Puspendu and Mahato, B and De, P K (2009) Evolution of Recrystallization Texture in AISI300 Series Austenitic Stainless Steels After Cold Rolling to Large Strain. Microstructure and Texture in Steels, 22 (22). pp. 361-378.

Goswami, B and Ray, Ashok K (2009) Emerging trends in mechanical properties of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 51 (3). pp. 149-173.

Goswami, B and Ray, Ashok K (2009) Perspectives of sensor alloys in nickel base systems. Journal of Metallurgy and Materials Science, 51 (1). pp. 1-20.

Goswami, B and Ray, Ashok K (2009) Perspectives of shape memory surgical alloys in nickel base systems. Journal of Metallurgy and Materials Science, 51 (2). pp. 77-89.

Goswami, B and Ray, Ashok K (2009) Recent bio-medical alloys in cobalt base systems. Journal of Metallurgy and Materials Science, 51 (4-5). pp. 233-246.

Guha, Avijit and Singh, Sashi and Kumaresan, R and Nayar, S and Sinha, Arvind (2009) Mesenchymal cell response to nanosized biphasic calcium phosphate composites. Colloids and Surfaces B: Biointerfaces, 73 (1). pp. 146-151.

Gupta, Siddhi and Pramanick, A K and Kailath, A J and Mishra, T and Guha, Avijit and Nayar, S and Sinha, Arvind (2009) Composition dependent structural modulations in transparent poly(vinyl alcohol) hydrogels. Colloids and Surfaces B: Biointerfaces, 74 (1). pp. 186-190.

H

Hait, Jhumki and Jana, R K and Sanyal, S K (2009) Processing of copper electrorefining anode slime: a review. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 118 (4). pp. 240-252.

Humane, M M and Peshwe, D R and Paretkar, R K (2009) Optimizing Cold Rolling and Mode of Annealing of Interstitial-Free High-Strength Steel Sheets. Steel Research International, 80 (10). pp. 785-792.

J

Jana, R K and Randhawa, N S (2009) Production of Silicomanganese Alloy from Low Manganese Containing Leached Sea Nodules Residue. In: The Eighth (2009) ISOPE Ocean Mining Symposium, September 20-24, 2009, Chennai, India.

Jegannathan, S and Arumugam, T K and Sankara Narayanan, T S N and Ravichandran, K (2009) Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: Cathodic vs. anodic. Progress in Organic Coatings, 65 (2). pp. 229-236.

Jindal, Vikas and Srivastava, V C and Uhlenwinkel, V (2009) On the role of liquid phase stability and GFA parameters. Journal of Non-Crystalline Solids, 355 (28-30). pp. 1552-1555.

K

Karuppiah, M T and Bhaskar Raju, G (2009) Anodic Degradation of CI Reactive Blue 221 Using Graphite and IrO2/TaO2/RuO2 Coated Titanium Electrodes. Industrial & Engineering Chemistry Research, 48 (4). pp. 2149-2156.

Khanra, A K and Pathak, L C and Godkhindi, M M (2009) Application of new tool material for electrical discharge machining (EDM). Bulletin of Materials Science, 32 (4). pp. 401-405.

Kim, Hong-In and Park, Kyung-Ho and Mishra, D (2009) Influence of sulfuric acid baking on leaching of spent Ni–Mo/Al2O3 hydro-processing catalyst. Hydrometallurgy, 98 (1-2). pp. 192-195.

Kim, Hong-In and Park, Kyung-Ho and Mishra, D (2009) Sulfuric acid baking and leaching of spent Co-Mo/Al2O3 catalyst. Journal of Hazardous Materials, 166 (2-3). pp. 1540-1544.

Konar, J and Kumari, Smita and Nag, Sudha T and Amritphale, S S and Chandra, N (2009) Effect of sodium hexameta phosphate in the presence and absence of calcium chloride on corrosion behaviour of different types of white cast iron. Journal of Metallurgy and Materials Science, 51 (1). pp. 53-59.

Kranti, R and Kumar, Manoj and Ranganathan, S and Saxena, S B Lal and Mehrotra, S P (2009) Resistance Heating of Oxide Slags - Theoretical Model and Experimental Validation. The Canadian Metallurgical Quarterly, 48 (4). pp. 387-397.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Corrosion resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Alloys and Compounds, 480 (2). pp. 765-770.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Wear resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Materials Science, 44 (2). pp. 433-440.

Kumar, A Seshu and Ravi Kumar, B and Datta, G L and Ranganath, V R (2009) Effect of Microstructure and Grain Size on the Fracture Toughness of a Micro Alloyed Steel. Materials Science and Engineering A .

Kumar, M and Srikanth, S and Ravi Kumar, B and Alex, T C and Das, Swapan K (2009) Synthesis of pure and Sr-doped LaGaO3, LaFeO3 and LaCoO3 and Sr,Mg-doped LaGaO3 for ITSOFC application using different wet chemical routes. Materials Chemistry and Physics, 113 (2-3). pp. 803-815.

Kumar, Rakesh and Kumar, Sanjay and Alex, T C and Mehrotra, S P (2009) Mechanochemistry in the Utilisation/Minimisation of Wastes from Metallurgical and Allied Industries. In: The Fourth Asian Particle Technology Symposium (APT 2009), September 14-16, 2009, Hotel Ashok, Delhi.

Kumar, Vinay and Kumar, Manoj and Jha, Manis K and Jeong, Jinki and Lee, Jae-chun (2009) Solvent extraction of cadmium from sulfate solution with di-(2-ethylhexyl) phosphoric acid diluted in kerosene. Hydrometallurgy, 96 (3). pp. 230-234.

Kumar, Vinay and Kumar, Manoj and Jha, Manis K and Lee, Jae-chun (2009) Extraction and separation of metals using LIX 84 AND D2EHPA diluted in kerosene from sulfate solution. Proceedings of EPD on Mineral, Metal and Materials Society . pp. 1089-1094.

Kumari, K and Prasad, K and Yadav, K L and Sen, S (2009) Structural and Dielectric Properties of ZrO2 Added (Na1/2Bi1/2)TiO3 Ceramic. BRAZILIAN JOURNAL OF PHYSICS , 39 (2). pp. 297-300.

Kumari, Puja (2009) Biosorption of Cr(III) using native fungal species isolated from tannery effluents. Masters thesis, National Metallurgical Laboratory (NML).

M

Madhuri, S (2009) Studies on adaptive tolerance of aspergillus niger and penicillium species on hexavalent chromium and its applications in biosorption. Masters thesis, National Metallurgical Laboratory (NML).

Maity, S K and Ballal, N B and Goldhahn, G and Kawalla, R (2009) Development of Ultrahigh Strength Low Alloy Steel through Electroslag Refining Process. ISIJ International, 49 (6). pp. 902-910.

Maity, S K and Shekhar, M Chandra and Ananth, V (2009) An exploratory study of electrodeposition of titanium using titanium dioxide carbon composite anode and molten aluminium cathode. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 118 (1). pp. 10-17.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Mandal, G K and Balasubramaniam, R and Mehrotra, S P (2009) Theoretical Investigation of the Interfacial Reactions during Hot-Dip Galvanizing of Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 40-A (3). pp. 637-645.

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2009) Microstructural study of galvanized coatings formed in pure as well as commercial grade zinc baths. Transactions of the Indian Institute of Metals, 62 (1). pp. 35-40.

Mehta, K D and Anand Ram, S and Pal, S C and Abhilash, and Pandey, B D and Mankhand, T R (2009) Bacterial solubilisation of copper from a low grade sulphide mineral. In: Proc.BIOHYDROMET 2009, April 6, 2009, South Africa.

Metya, Avijit Kumar and Murthy, G V S and Bar, H N and Parida, N (2009) Microstructural Characterization of Precipitation Process in a Nickel-Alloy by Non-linear Ultrasonic. In: Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation, December 10-12, 2009, Trichy.

Mishra, Suman K (2009) Nano and Nanocomposite Superhard Coatings of Silicon Carbonitride and Titanium Diboride by Magnetron Sputtering. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 6 (3). pp. 345-354.

Mishra, T and Hait, Jhumki and Aman, Noor and Gunjan, M K and Mahato, B and Jana, R K (2009) Corrigendum to “Surfactant mediated synthesis of spherical binary oxides photocatalyst with enhanced activity in visible light” [J. Colloid Interface Sci. 327 (2008) 377–383]. Journal of Colloid and Interface Science, 330 (1). 243- .

Mohanta, Ojaswini and Ghosh, M and Mitra, A and Panda, A K (2009) Enhanced ferromagnetic ordering through nanocrystallization in cobalt incorporated FeSiBNb alloys. Journal Of Physics D-Applied Physics , 42 (6). 065007.

Mohapatra, J N and Panda, A K and Mitra, A (2009) Magnetic properties evaluation of ageing behaviour in water-quenched 5Cr-0.5Mo stee. Journal Of Physics D-Applied Physics , 42 (9). 095006.

Mukherjee, K and Prakash, S (2009) Studies on RTD of Metalloids in the Blast Furnace. Journal Of Iron And Steel Research International, 16 (Part.2 Suppl.2). pp. 1101-1107.

Munda, Parikshit and Dube, R K and Basu, Bikramjit and Koria, S C (2009) Friction and wear properties of steel backed Al–10Sn–4Si–1Cu metallic strips prepared via spray atomization–deposition-rolling route. Surface & Coatings Technology, 203 (23). pp. 3541-3548.

Murthy, G V S and Anish, K and Jayakumar, T and Ghosh, R N (2009) Characterization Of Precipitation Behavior In Nimonic 263 By Ultrasonic Velocity Measurements. Review Of Progress In Quantitative Nondestructive Evaluation, Vols 28a And 28b , 1096 . pp. 1252-1258.

Murthy, G V S and Sridhar, G and Kumar, Anish and Jayakumar, T (2009) Characterization of intermetallic precipitates in a Nimonic alloy by ultrasonic velocity measurements. Materials Characterization, 60 (3). pp. 234-239.

N

Nandy, Bikash and Chaudhury, Manoj Kumar and Pal, J and Bhattacharjee, D (2009) Sintering Characteristics of Indian Chrome Ore Fines. Metallurgical and Materials Transactions B, 40 (5). pp. 662-675.

Nayak, B and Das, Swapan K and Bhattacharyya, K K (2009) Baddeleyite (ZrO2) in manganese nodules of Central Indian Ocean Basin: An evidence for low temperature mobility of zirconium. Geochimica et Cosmochimica Acta, 73 (13). A933-A933.

Nayak, B and Singh, A K and Upadhyay, A K and Bhattacharyya, K K (2009) A note on the characters of some Lower Gondwana coals of West Siang district in the Arunachal Himalaya and their trace element content. Journal of the Geological Society of India, 74 (3). pp. 395-401.

Nayar, S and Guha, Avijit (2009) Waste utilization for the controlled synthesis of nanosized hydroxyapatite. Materials Science and Engineering: C, 29 (4). pp. 1326-1329.

Nguyen, N V and Lee, Jae-chun and Jha, Manis K and Yoo, Kyoungkeun and Jeong, Jinki (2009) Copper recovery from low concentration waste solution using Dowex G-26 resin. Hydrometallurgy, 97 (3-4). pp. 237-242.

P

Padmanabhan, K A and Basariya, M R (2009) Mesoscopic grain boundary sliding as the rate controlling process for high strain rate superplastic deformation. Materials Science and Engineering A, 527 (1-2). pp. 225-234.

Pal, J and Ghorai, S and Goswami, M C and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) Development of Fluxed iron oxide pellets strengthened by CO2 treatment for use in basic oxygen steel making. ISIJ International, 49 (2). pp. 210-219.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2009) Development of Fluxed Iron Oxide Pellets for Steel Making Utilizing Waste Materials. In: NMD-ATM 2009, November 14-17, 2009, Kolkata.

Pal, J and Goswami, M C and Mahato, B and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) High Temperature Characterization of CO2 Treated Fluxed Pellets Developed for Basic Oxygen Steel Making. ISIJ International, 49 (9). pp. 1325-1332.

Pallavi, Pushpa and Abhilash, (2009) Microbial Isolation Studies and its Implication in Biosorption of Chromium. Training Report (TR). NML, NML, Jamshedpur.

Panda, A K and Mohanta, Ojaswini and Ghosh, M and Mitra, A (2009) Development of Nanostructured CoFe-Based Alloys for High Temperature Magnetic Applications. Journal Of Nanoscience And Nanotechnology, 9 (9). pp. 5600-5603.

Panda, A K and Singh, S and Das, Swapan K and Mitra, A and Koblischka, M and Jamieson, B and Roy, Subrata (2009) Effect of magnetizing field on the martensitic transformations in a melt spun NiMnGa alloy. Journal Of Physics D-Applied Physics , 42 (24). p. 245004.

Parida, N (2009) Non Destructive Testing and Evaluation. In: A Continuing Education Course on Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur.

Parida, N and Das, Swapan K and Tarafder, S (2009) Failure analysis of railroad wheels. Engineering Failure Analysis, 16 (5). pp. 1454-1460.

Parmar, Kavita and Chaturvedi, Hema T and Akhtar, Md Wasi and Chakravarty, S and Das, S K and Pramanick, A K and Ghosh, M and Panda, A K and Bandopadhyay, N R and Bhattacharjee, S (2009) Characterization of cobalt precipitation tube synthesized through “silica garden” route. Materials Characterization, 60 (8). pp. 863-868.

Poddar, Palash and Mukherjee, Surojit and Sahoo, K L (2009) The Microstructure and Mechanical Properties of SiC Reinforced Magnesium Based Composites by Rheocasting Process. Journal of Materials Engineering and Performance, 18 (7). pp. 849-855.

Pramanick, A K (2009) Hybrid and nanomaterials - 2009. Current Science, 96 (11). pp. 1-2.

Pramanick, A K and Sinha, Arvind and Sastry, G V S and Ghosh, R N (2009) Near-grain-boundary characterization by atomic force microscopy. Ultramicroscopy, 109 (6). pp. 741-747.

Prasad, K and Kumari, K and Chandra, K P and Yadav, K L and Sen, S (2009) Dielectric relaxation and ac conductivity of WO3 added (Na1/2Bi1/2)TiO3 ceramic. Materials Science - Poland, 27 (2). pp. 373-384.

Prasad, Sanjay (2009) Production of Electrolytic Zinc Powder from Zinc Dross Generated by Galvanizing Plant. In: National Seminar on Zinc Coated Steel Sheets - Technology & Markets, Dec. 21 & 22, 2009, New Delhi.

Prodhan, A (2009) Effect of Electric Current (Plasma) Treatment on LM-6 Al-Si Alloy. Transactions Of The American Foundry Society, 117 . pp. 63-77.

R

Rajinikanth, V and Munda, Parikshit and Mandal, D and Minj, R K and Das, Swapan K and Ghosh Chowdhury, S and Singh, S R (2009) Development and Evaluation of Wear Resistant Material. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Randhawa, N S and Agarwal, Sanjay and Sahu, K K and Jana, R K (2009) Recovery of copper, nickel and cobalt from manganese nodules by Arc furnace smelting. In: International conference of Non-ferrous metals 2009, July 10-11, 2009, Bhubaneswar.

Rao, D S and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Vijaya Kumar, T V (2009) Mineralogy and Geochemistry of a low grade iron ore sample from Bellary-Hospet sector, India and their implications on beneficiation. Journal of Minerals & Materials characterization & Engineering, 8 (2). pp. 115-131.

Rao, D S and Bhaskar Raju, G and Prabhakar, S and Vijaya Kumar, T V (2009) Beneficiation of siliceous limestone sample. AT Mineral Processing, 50 (6). pp. 36-47.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2009) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Ravi Kumar, B and Mahato, B and Sharma, S and Sahu, J K (2009) Effect of Cyclic Thermal Process on Ultrafine Grain Formation in AISI 304L Austenitic Stainless Steel. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science , 40A (13). pp. 3226-3234.

Ray, Ashok K and Guguloth, K and Swaminathan, J and Bose, S C and Roy, Nilima and Tiwari, Y N and Roy, P K and Alam, Z and Sharma, VSRA and Joshi, Srikanth V and Venkataraman, B and Das, D K (2009) Damage Resistance of a Thermal Barrier Coated Superalloy Used in Aero Turbine Blade under Accelerated Creep Condition. High Temperature Materials And Processes, 28 (1-2). pp. 35-53.

Ray, Ashok K and Roy, Nilima and Kar, Abhijit and Ray, Ajoy K and Bose, S C and Das, Goutam and Sahu, J K and Das, D K and Venkataraman, B and Joshi, Srikanth V (2009) Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade. Materials Science and Engineering: A, 505 (1-2). pp. 96-104.

Ray, Ashok K and Whittenberger, J D (2009) Stress rupture behavior of a thermal barrier coated AE 437A Ni-based superalloy used for aero turbine blades. Materials Science and Engineering: A, 509 (1-2). pp. 111-114.

Ray, Mallar and Sarkar, S and Bandyopadhyay, N R and Hossain, S M and Pramanick, A K (2009) Silicon and silicon oxide core-shell nanoparticles: Structural and photoluminescence characteristics. Journal of Applied Physics, 105 (7). 074301.

Roy, Ajoy K and Mandhyan, A K and Sahoo, K L and Banhart, J and Chattoraj, I (2009) Electrochemical response of amorphous and devitrified Al-Ni-La-X (X = Ag, Cu) alloys. Materials and Corrosion / Werkstoffe und Korrosion, 60 (6). pp. 431-437.

Roy, H and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Monotonic vis-à-vis cyclic fracture behaviour of AISI 304LN stainless steel. Engineering Fracture Mechanics, 76 (12). pp. 1822-1832.

Roy, Himadri and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Crack Tip Damage Mechanism under Monotonic and Cyclic Loading Conditions. Key Engineering Materials , 417-418 (8). pp. 105-108.

Roy, Rajat K and Kar, Sujoy and Das, Siddhartha (2009) Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011 alloy. Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011 alloy, 468 . pp. 122-129.

Roy, Rajat K and Panda, A K and Das, Swapan K and Govind, and Mitra, A (2009) Development of a copper-based filler alloy for brazing stainless steels. Materials Science and Engineering A, 523 (1-2). pp. 312-315.

Roy, Rajat K and Panda, A K and Ghosh Chowdhury, S and Mitra, A and Ghosh, R N (2009) Effect of annealing treatment on soft magnetic properties of Fe–6.5 wt% Si wide ribbons. Journal of Magnetism and Magnetic Materials, 321 (18). pp. 2865-2870.

Roy, Subrata (2009) Recovery Improvement of Fine Iron Ore Particles by Multi Gravity Separation. The Open Mineral Processing Journal, 2 (14). pp. 17-30.

Roy, Subrata and Das, Avimanyu (2009) Nature of low-grade Indian iron ores and the prospects of their enrichment through gravity separation. Minerals & Metallurgical Processing, 26 (3). pp. 141-150.

Roy, Subrata and Venkatesh, A S (2009) Banded Iron Formation to Blue Dust: mineralogical and geochemical constraints from the Precambrian Jilling-Langalata Deposits, Eastern Indian Craton. Applied Earth Science : IMM Transactions section B, 118 (3-4). pp. 178-188.

Roy, Subrata and Venkatesh, A S (2009) Mineralogy and geochemistry of banded iron formation and iron ores from eastern India with implications on their genesis. Journal of Earth System Science, 118 (6). pp. 619-641.

Rupa, P K P and Chakraborti, P C and Mishra, Suman K (2009) Mechanical and deformation behaviour of titanium diboride thin films deposited by magnetron sputtering. Thin Solid Films, 517 (9). pp. 2912-2919.

S

Saha, Sraboni (2009) Does the antibacterial activity of silver depends on its particle size. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Sahoo, K L and Pathak, B N (2009) Solidification behaviour, microstructure and mechanical properties of high Fe-containing Al–Si–V alloys. Journal of Materials Processing Technology, 209 (2). pp. 798-804.

Sahoo, K L and Poddar, Palash and Kumar, Randhir and Pushp, P T (2009) Strain induced melt activation — an effective route to produce high performance alloy plates and sheets. Transactions of the Indian Institute of Metals, 62 (4-5). pp. 275-278.

Sahu, A K and Goswami, N G (2009) Online access and productivity in research publication – A case study. In: Library & Information Technology: Driving Management Education (Conference Proceedings). Vayu Education of India, New Delhi, pp. 366-373. ISBN 978-93-80097-08-4

Sahu, J K and Ghosh, R N and Christ, H J (2009) Low cycle fatigue behaviour of duplex stainless steel: influence of isothermal aging treatment. Fatigue & Fracture of Engineering Materials & Structures, 33 (2). pp. 77-86.

Sahu, J K and Krupp, U and Ghosh, R N and Christ, H J (2009) Effect of 475 °C embrittlement on the mechanical properties of duplex stainless steel. Materials Science and Engineering: A, 508 (1-2). pp. 1-14.

Sahu, K K and Mishra, D and Ghosh, S and Jana, R K and Agrawal, A (2009) Selective dissolution of chalcopyrite in chloride media. Journal of Metallurgy and Materials Science, 51 (3). pp. 215-233.

Sahu, Rina and Gangopadhyay, A K and Kelton, K F and Chatterjee, S and Sahoo, K L (2009) Room temperature ageing of Al–Ni–RE (RE = La, Gd, Er) metallic glasses. Scripta Materialia, 61 (6). pp. 588-591.

Sahu, Rina and Kailath, A J and Chatterjee, S and Sahoo, K L (2009) Effect of La content on the room temperature ageing behavior of Al90-xNi6La4+x (x = 0 to 3) metallic glasses. Materials Science and Engineering A, 527 (6). pp. 1339-1342.

Sahu, S K and Kumar, Vivek and Pandey, B D and Kumar, Vinay (2009) Solvent extraction and separation of zinc and cobalt from ammoniacal solution. In: International Seminar on Mineral Processing Technology (MPT-2009) , October 28-30, 2009, IMMT, Bhubaneshwar.

Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2009) Removal of chromium(III) by cation exchange resin, Indion 790 for tannery waste treatment. Hydrometallurgy, 99 (3-4). pp. 170-174.

Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Seshadri, S K (2009) Recent Advances In Surface Treatment And Electrodeposition. Corrosion Reviews , sp. Iss.sl suppl . pp. 533-600.

Sasikumar, C (2009) The effect of mechanical activation on energetics and dissolution kinetics of Indian beach sand ilmenite. PhD thesis, IT, Banaras Hindu University Varanasi.

Sasikumar, C and Mukhopadhyay, N K and Mehrotra, S P (2009) Energetics of mechanical activation – Application to ilmenite. Minerals Engineering, 22 (6). pp. 572-574.

Satendra, Kumar and Sankara Narayanan, T S N (2009) Electrochemical characterization of Beta-Ti alloy in Ringer’s solution for implant application. Journal of Alloys and Compounds, 479 (1-2). pp. 699-703.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2009) Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time. Materials Science and Engineering C, 29 (6). pp. 1942-1949.

Sau, D C and Mohanty, Swati and Biswal, K C (2009) Bed Fluctuation Ratio for Regular and Irregular Particles in Gas-Solid Tapered Fluidised Beds. Indian Chemical Engineer, 51 (2). pp. 1-10.

Sengupta, B and Chatterjee, S and Rott, U and Kauffman, H and Bandopadhyay, A and DeGroot, W and Nag, N K and Carbonell-Barrachina, A A and Mukherjee, Surojit (2009) A simple chemical free arsenic removal method for community water supply – A case study from West Bengal, India. Environmental Pollution, 157 (12). pp. 3351-3353.

Sharma, Mamta (2009) Innovations in Natural Coke Studies. In: Proceedings of the Ninety Sixth Session of the Indian Science Congress, Shillong-2009, October 17, 2008, Shillong.

Singh, A K and Shukla, N K and Srivastava, S K and Haldar, D D and Roy, B N and Sharma, Mamta (2009) Precautionary Measures in Determining Volatile Matter in Natural Coke Washability Fractions. International Journal of Coal Preparation and Utilization , 29 (1). pp. 34-47.

Singh, Manjit and Bhattamishra, A K and Das, N N (2009) Effect of organic additives on inhibition of corrosion of mild steel in 2M H2SO4 solution. Journal of Metallurgy and Materials Science, 51 (2). pp. 113-117.

Singh, R N and Madhu, and Awasthi, R and Tiwari, S K (2009) Iron molybdates as electrocatalysts for O2 evolution reaction in alkaline solutions. International Journal of Hydrogen Energy, 34 (11). pp. 4693-4700.

Singh, Raghuvir and Das, Goutam and Singh, P K and Chattoraj, I (2009) Low-Temperature Sensitization Behavior of Base, Heat-Affected Zone, and Weld Pool in AISI 304LN. Metallurgical and Materials Transactions A, 40 (5). pp. 1219-1234.

Singh, Ratnakar and Rao, D S and Sinha, N and Banerjee, B and Bhattacharyya, K K (2009) Mineralogical and flotation characteristics of lead-zinc ore with a particular reference to effects of oxidation. Journal of Metallurgy and Materials Science, 51 (3). pp. 205-213.

Singh, Satnam and Mitra, A and Panda, A K (2009) Magnetic and structural evolution in Ni-rich off-stoichiometric NiMnGa melt spun ribbons. Journal of Metallurgy and Materials Science, 51 (3). pp. 197-203.

Sinha, Arvind and Guha, Avijit (2009) Biomimetic patterning of polymer hydrogels with hydroxyapatite nanoparticles. Materials Science and Engineering: C, 29 (4). pp. 1330-1333.

Sinha, Arvind and Gupta, A K and Pramanick, A K and Nayar, S and Gunjan, M K and Mishra, T and Bhatt, N C and Vishwanath, N and Das, Samar (2009) Mimicking biomineralization under microgravity. Materials Science and Engineering: C, 29 (3). pp. 779-784.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2009) Recovery of acid and iron values from the spent pickle liquor by solvent extraction. In: NMD - ATM 2009, November 14, 2009 to November 17, 2009, Science City Complex,Kolkata, India.

Sinha, Vibhash Chandra (2009) Biomimetic hydroxyapatite coating on titanium alloys for biomedical application. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Srikanth, S and Kumar, Rakesh and Devi, L M and Kumar, Satender and Hait, Jhumki and Khan, Z H (2009) Insitu activation leaching and exsitu activation-pressure leaching of zircon in acid and alkaline solutions (OLP-0095). Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Srivastava, V C and Rudrakshi, G B and Uhlenwinkel, V and Ojha, S N (2009) Wear characteristics of spray formed Al-alloys and their composites. Journal of Materials Science (9). pp. 2288-2299.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Schulz, A and Rosenauer, A and Zoch, W and Eckert, J (2009) Spray forming of bulk Al85Y8Ni5Co2 with co-existing amorphous, nano- and micro-crystalline structures. Transactions of the Indian Institute of Metals, 62 (4-5). pp. 331-335.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Rosenauer, A and Zoch, H -W (2009) Novel microstructural characteristics and properties of spray formed Al-RE-TM based alloys. In: International conference on Spray forming, 2009, September 7-9, 2009, Bremen, Germany.

Srivastava, V C and surreddi, K B and Uhlenwinkel, V and Schulz, A and Eckert, J and Zoch, H -W (2009) Formation of Nanocrystalline Matrix Composite during Spray Forming of Al83La5Y5Ni5Co2. Metallurgical and Materials Transactions A, 40 (2). pp. 450-461.

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Chattoraj, I (2009) Failure analysis of air pre-heater tubes of a petrochemicals plant. Engineering Failure Analysis, 16 (7). pp. 2371-2381.

T

Tarafder, Mita and Chattoraj, I and Nasipuri, M and Mitra, A (2009) Magnetic characterization of HSLA steel by power-law decay exponents of Barkhausen emission signal. Journal of Magnetism and Magnetic Materials, 321 (8). pp. 1034-1038.

Tarafder, Mita and Chattoraj, I and Tarafder, S and Nasipuri, M (2009) Fractal Analysis to Determine Self-Similar Characteristics in the Microstructure of HSLA Steel. Materials and Manufacturing Processes, 24 . pp. 145-149.

Tarafder, Mita and Chattoraj, I and Tarafder, S and Nasipuri, M (2009) Self-similar and self-affine characteristics of microstructural images of HSLA steel. Materials Science and Technology, 25 (4). pp. 542-548.

Tarafder, S and Sivaprasad, S (2009) Component Integrity Evaluation. In: Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur.

Tiwari, S K and Adhikary, Jhuma and Singh, T B and Singh, Raghuvir (2009) Preparation and characterization of sol–gel derived yttria doped zirconia coatings on AISI 316L. Thin Solid Films, 517 (16). pp. 4502-4508.

V

Vaish, A K and Singh, S D and Minj, R K and Konar, J and Premchand, and Gupta, R C (2009) Prospects of smelting reduction of nickel - chromium - cobalt bearing magnetite deposit of Nagaland State for value added products. Journal of Metallurgy and Materials Science, 51 (4). pp. 247-258.

Venkateswarlu, K and Rajinikanth, V and Naveen, T and Sinha, D P and Atiquzzaman, and Ray, Ajoy K (2009) Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques. Wear, 266 (9-10). pp. 995-1002.

Vidyadhar, A and Vaishanau, V S and Das, Avimanyu (2009) Optimization of Process Parameters for Flowing Film Concentration of Ground Printed Circuit Boards. In: International Seminar on Mineral Processing Technology (MPT-2009), Oct 28-30, 2009, IMMT, Bhubaneshwar.

This list was generated on Sat Oct 20 12:11:02 2018 IST.