Items where Author is "Das, S K"

Article

Rai, R K and Sahu, J K and Das, S K and Paulose, N and Fernando, C (2020) Creep-fatigue deformation micromechanisms of a directionally solidified nickel-base superalloy at 850 degrees C. Fatigue & fracture of engineering materials & structures, 43(1) (IF- 2.555). pp. 51-62.

Singla, Rashmi and Tripathy, S and Das, S K (2019) An integrated phenomenological process model for prediction of oxygen pickup during open air tapping and pouring of liquid steel. Chemical Engineering Science, 203 . pp. 391-401.

Shah, Minal and Das, S K and Ghosh Chowdhury, S (2019) Effect of Alloying Elements on Microstructure and Mechanical Properties of Air-Cooled Bainitic Steel. Metallurgical and Materials Transactions A, 50(5) . pp. 2092-2102.

Singh, N and Nanda, T and Kumar, B R and Das, S K and Singh, V (2019) In situ investigations of microstructural changes during tensile deformation of AISI 304L stainless steels. Archives of Civil and Mechanical Engineering, 19(3) . pp. 672-679.

Rai, R K and Sahu, J K and Pramanick, A K and Paulose, N and Fernando, D.C and Das, S K (2019) Creep deformation micro-mechanisms of CM 247 DS LC Ni-base superalloy under relevant service condition. Materials Characterization, 150 . pp. 155-165.

Mandal, G K and Kamaraj, A and Minj, M.M. and Das, S K and Ramanan, R B V and Venugopalan, T (2019) Development of Speciality Grade Wire by Controlling the Inclusions in High-Carbon Steel Using Synthetic Slag Treatment. Transactions of the Indian Institute of Metals, 72(2) . pp. 369-381.

Hore, S and Das, S K (2019) Computer simulation of microstructure evolution in strip-cast silicon steel with cube and fibre texture. Philosophical Magazine (IF-1.855). pp. 2841-2857.

Kumar, Sunil and Pattanayek, S K and Das, S K (2019) Reactivity-Controlled Aggregation of Graphene Nanoflakes in Aluminum Matrix: Atomistic Molecular Dynamics Simulation. Journal of Physics Chemistry C, 123(29) . pp. 18017-18027.

Mandal, G K and Ashok, K and Das, S K and Biswas, S K and Sarkar, R B and Bharathy, R S and Srivastava, V C (2018) Development of Stretch Flangeable Grade Steels by Inclusion Engineering Approach. Journal Of Materials Engineering And Performance, 27(11) (IF-1.094). pp. 5622-5634.

Jena, P S M and Sahu, J K and Rai, R K and Das, S K and Singh, R K (2018) Influence of duplex ferritic-austenitic matrix on two body abrasive wear behaviour of high chromium white cast iron. Wear, 406 (IF-2.531). pp. 140-148.

Rai, R K and Sahu, J K and Jena, P S M and Das, S K and Paulose, N and Fernando, D.C (2018) Micromechanism of High-Temperature Tensile Deformation Behavior of a Directionally Solidified Nickel Base Superalloy. Journal of Materials Engineering and Performance, 27(2) (IF-1.331). pp. 659-665.

Rai, R K and Sahu, J K and Das, S K and Paulose, N and Fernando, D.C and Srivastava, C (2018) Cyclic plastic deformation behaviour of a directionally solidified nickel base superalloy at 850 degrees C: Damage micromechanisms. Materials Characterization, 141 (IF-3.220). pp. 120-128.

Nivas, R and Singh, P K and Das, Goutam and Das, S K and Kumar, S and Mahato, B and Sivaprasad, K and Ghosh, M (2017) A comparative study on microstructure and mechanical properties near interface for dissimilar materials during conventional V-groove and narrow gap welding. Journal of Manufacturing Processes, 25 (IF-2.322). pp. 274-283.

Nivas, R and Das, Goutam and Das, S K and Mahato, B and Kumar, Sanjay and Sivaprasad, K and Singh, P K and Ghosh, M (2017) Effect of Stress Relief Annealing on Microstructure & Mechanical Properties of Welded Joints Between Low Alloy Carbon Steel and Stainless Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 48 A(1) (IF-1.874). pp. 230-245.

Santosh, R and Singh, P K and Das, Goutam and Korody, J and Das, S K and Kumar, S and Ghosh, M (2016) Effect of different parameters on uncertainty during evaluation of strength of dissimilar metal weld. Materialwissenschaft und Werkstofftechnik, 47(9) (IF-0.524). pp. 845-851.

Hore, S and Das, S K and Banerjee, S and Mukherjee, S (2016) An adaptive neuro-fuzzy inference system-based modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking , 44(9) (IF-0.985). pp. 1-10.

Dhar, P and Bhattacharjee, S and Nayar, S and Das, S K (2015) Anomalously Augmented Charge Transport Capabilities of Biomimetically Transformed Collagen Intercalated Nanographene-Based Biocolloids. LANGMUIR, 31(12) (IF-4.384). pp. 3696-3706.

Sahu, J K and Ravi Kumar, B and Das, S K and Paulose, N and Mannan, S L (2015) Isothermal high temperature low cycle fatigue behavior of Nimonic-263: Influence of type I and type II hot corrosion. Materials Science and Engineering A, 622 (IF-2.409). pp. 131-138.

Bhattacharya, S and Dhar, S and Das, S K and Ganguly, Ranjan and Webster, T J and Nayar, S (2014) Colloidal graphite/graphene nanostructures using collagen showing enhanced thermal conductivity. International Journal of Nanomedicine, 9 (IF-4.195). pp. 1287-1298.

Das, Arpan and Sivaprasad, S and Tarafder, Mita and Das, S K and Tarafder, S (2013) Estimation of Damage in high strength steels. Applied Soft Computing, 13(2) (IF-2.140). pp. 1033-1041.

Dey, Swapna and Das, S K and Basumallick, A and Chattoraj, I (2010) The Effect of pitting on fatigue lives of peak-aged and overaged 7075 aluminum alloys. Metallurgical and Materials Transactions A , 41A . pp. 3297-3307.

Tarafder, Mita and Das, S K and Chattoraj, I and Nasipuri, M and Tarafder, S (2010) Fractal-based quantification of crack paths for determination of effective microstructural length scales and fracture toughness. Scripta Materialia, 62 (2). pp. 109-112.

Tarafder, Mita and Chattoraj, I and Nasipuri, M and Tarafder, S and Das, S K (2010) Fractal Analysis of Microstructural Images For Evaluation of HSLA Steel. TMS 2010 139th Annual Meeting & Exhibition - Supplemental Proceedings, 2 . pp. 567-276.

Parmar, Kavita and Chaturvedi, Hema T and Akhtar, Md Wasi and Chakravarty, S and Das, S K and Pramanick, A K and Ghosh, M and Panda, A K and Bandopadhyay, N R and Bhattacharjee, S (2009) Characterization of cobalt precipitation tube synthesized through “silica garden” route. Materials Characterization, 60 (8). pp. 863-868.

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2009) Microstructural study of galvanized coatings formed in pure as well as commercial grade zinc baths. Transactions of the Indian Institute of Metals, 62 (1). pp. 35-40.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Das, Arpan and Das, S K and Sivaprasad, S and Tarafder, S (2008) Fracture-property correlation in copper-strengthened high-strength low-alloy steel. Scripta Materialia, 59 (7). pp. 681-683.

Venkateswarlu, K and Rajnikanth, V and Sirkar, M K and Atiquzzaman, and Sinha, D P and Das, S K (2008) High stress abrasive wear behavior of coal mill liner materials - A model based factorial design. Journal of Metallurgy and Materials Science, 50 (3). pp. 151-166.

Sasikumar, C and Srikanth, S and Das, S K (2006) Analysis of premature failure of a tie bar in an injection molding machine. Engineering Failure Analysis, 13 (8). pp. 1246-1259.

Ray, Ashok K and Das, D K and Venkataraman, B and Roy , P K and Goswami, B and Roy, Nilima and Das, S K and Parida, N and Tarafder, S and Chaudhuri, S and Sahay, S K and Ghosh, R N (2005) Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners. Materials Science and Engineering A, 405 (1-2). pp. 194-200.

Singh, Ratnakar and Goswami, M C and Vaish, A K and Das, S K and Goel , R P (2005) NML's Contribution to Development of Indian Steel Industry. Motif . pp. 1-4.

Bhattamishra, A K and De, P K and Mandhyan, A and Das, S K (2005) Localised corrosion of 2124SiCp composite. Journal of Metallurgy and Materials Science, 47 (4). pp. 215-222.

Kumar, S and Das, S K and Daspoddar, P K (2004) Synthesis of mullite aggregates from fly ash: effect on thermomechanical behaviour of low cement castables. British Ceramic Transactions, 103 (4). pp. 176-180.

Sahoo, K L and Das, S K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al–Fe–V–Si alloys. Materials Science and Engineering A, 355 (1-2). pp. 193-200.

Ray, Ajoy K and Venkateswarlu, K and Chaudhury, S K and Das, S K and Ravi Kumar, B and Pathak, L C (2002) Fabrication of TiN reinforced aluminium metal matrix composites through a powder metallurgical route. Materials Science and Engineering A, 338 (1-2). pp. 160-165.

Sinha, Arvind and Agrawal, A and Nayar, S and Das, S K and Ramachandrarao, P (2002) Morphosynthesis of Calcium Carbonate in Poly(vinylalcohol). Morphosynthesis of Calcium Carbonate in Poly(vinylalcohol) , 10 (3). pp. 149-153.

Venkateswarlu, K and De, P K and Das, S K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2002) Thermo-mechanical treatment of AI-5Ti-lB and AI-5Ti master alloy on its grain refining performance on aluminium. Journal of Metallurgy and materials Science., 44 (3). pp. 109-125.

Sinha, Arvind and Agrawal, A and Das, S K and Ravi Kumar, B and Rao, Venkatesh and Ramachandrarao, P (2001) On the growth of monoclinic calcium carbonate in poly(vinyl alcohol). Journal of Materials Science Letters, 20 (17). pp. 1569-1572.

Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Minj, R K and Das, Goutam and Das, S K and Kumar, R and Das, Samar and Lakra, B A and Das, Swapan K and Ravi Kumar, B and Das, Samar and Lakra, B A (2001) Development of microalloyed steels and its design aspects Part I : Medium and low carbon micro-alloyed forging steels. Journal of Metallurgy and materials Science., 43 (3). pp. 147-173.

Das, S K and Kumar, Sanjay and Ramachandrarao, P (2000) Exploitation of iron ore tailing for the development of ceramic tiles. Waste Management, 20 (8). pp. 725-729.

Mishra, Suman K and Das, Swapan K and Das, S K and Ramachandrarao, P (2000) Sintering studies on ultrafine ZrB2 powder produced by a self-propagating high-temperature synthesis process. Journal of Materials Research, 15 (11). pp. 2499-2504.

Bhattamishra, A K and De, P K and Das, S K and Sivaramakrishnan, C S (2000) Environmental effect on cold pressure welded non-ferrous wires. Journal of Metallurgy and materials Science, 42 (1). pp. 47-51.

Prabhakar, S and Goswami, M C and Mahapatra, A K S and Ghosh, K C and Das, S K and Sinha, A N and Mishra, K K (2000) Morphology and reduction kinetics of fluxed iron ore pellets. Ironmaking & Steelmaking, 27 (3). pp. 194-201.

Sinha, Arvind and Das, S K and Rao, Venkatesh and Ramachandrarao, P (2000) Synthesis of organized inorganic crystal assemblies. Current Science, 79 (5). pp. 646-648.

Bandopadhyay, A and Kumar , Sanjay and Das, S K and Singh, K K (1999) In the Pursuit of Waste free Metallurgy. NML Technical Journal, 41 (4). pp. 143-162.

Ghosh, S and Das, S K (1998) Carbide Morphology Observations in Rare-Earth-Treated Fe-Al-Si-C Alloys. Materials Characterization, 41 (5). pp. 217-221.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Das, Goutam and Chattoraj, I and Das, S K and Bhattacharya, D K (1998) An investigation of the failure of low pressure steam turbine blades. Engineering Failure Analysis, 5 (3). pp. 181-193.

Adhikari, U B and Das, S K and Banerjee, G (1998) Bonding of high fly ash content ceramic bodies at low temperatures. pp. 143-148.

Das, S K and Daspoddar, P K (1997) Dehydration kinetics of hydrated calcium dialuminate. Thermochimica Acta, 293 (1-2). pp. 125-128.

Das, S K and Kumar, Sanjay and Daspoddar, P K (1997) Crystal morphology of calcium aluminates hydrated for 14 days. Journal of Materials Science Letters, 16 (9). pp. 735-736.

Das, S K and Kumar, Sanjay and Poddar, P K D (1997) Effect of synthetic refractory aggregates on the hydraulic and other properties of commercial high alumina cement. Industrial Ceramics, 17 (1). pp. 17-22.

Bandyopadhyay, D and Pathak, L C and Mukherjee, I and Das, S K and Ganguly, R G and Ramachandrarao, P (1997) Fabrication of Al2O3-SiCw in situ composite through a new combustion technique. Materials Research Bulletin, 32 (1). pp. 75-82.

Chattoraj, I and Bhattamishra, A K and Jana, S and Das, S K and Chakraborty, S P and De, P K (1996) The association of potentiokinetic reactivation and electrochemical pitting tests on a nitrogen bearing 19 Cr-17 Mn steel with its thermal history. Corrosion Science, 38 (6). pp. 957-969.

Kumar, Sanjay and Das, S K and Das, U S and Daspoddar, P K (1995) Effect of synthetic aggregates on the high temperature strength properties of mixed calcium aluminates. NML Technical Journal, 37 (4). pp. 117-122.

Kumar, Rakesh and Das, S K and Ray, R K and Biswas, A K (1994) A SEM backscattered electron mode study of microstructural features of ferromanganese nodules from central indian-ocean basin. Transactions of the indian institute of metals, 47 (5). pp. 273-285.

Das, S K and Chatterjee, M K (1993) Specific surfaces and heat of adsorption of some Indian clays by dye-adsorption technique. Bulletin of Materials Science, 16 (3). pp. 205-211.

Das, S K and Biswas, A and Ghosh, R N (1993) Volume fraction dependent particle coarsening in plain carbon steel. Acta Metallurgica et Materialia, 41 (3). pp. 777-781.

Book or NML Publication

Ray, Ajoy K and Mandal, S and Das, S K and Krishnan, C S S (1998) Low Cost In-Situ Formation of AIN - B- SiC. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 151-159.

Conference or Workshop Item

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V and Das, S K and Ray, Ajoy K (2011) Evaluation of interface microstructure for friction stir welded aluminium-stainless steel plate. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chakraborty, M and Ghosh, M and Das, S K and Mahato, B (2009) Synthesis and characterization of superparamagnetic Co & CoNi particles. In: TMS 2009 138th Annual Meeting & Exhibition - Supplemental Proceedings, Feb, 2009, TMS.

Ghosh, R N and Das, S K and Mitra, A (2008) Damage assessment of process heater tube. In: UNSPECIFIED.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2008) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 15-16, 2008, NML, Jamshedpur.

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2007) Microstructural Study of Galvanized coatings formed in Pure as well as Commercial Grade Zn Baths. In: International Conference on Metals and Alloys : Past, Present and Future Metallo-2007, Dec. 7-10, 2007, NML, Jamshedpur.

Das, S K and Godiwalla, K M and Mehrotra, S P (2006) A Mathematical Model to Characterize Volatile Matter Evolution during Carbonisation in Metallurgical Coke Ovens. In: International Symposium on Environment Friendly Technology in Mineral Processing and Metal Extraction (AETMME-2006), Nov, 2006, AETMME-2006.

Das, S K and Godiwalla, K M and Mehrotra, S P and Dey, P K and Mandal, D and Hegde, Shubha (2006) Mathematical modelling of ductile erosion behaviour of impacted fly ash particles on steel components of a coal fired boiler. In: 60 Annual Technical Meeting, November, 15-16 2006, IIM & Tata Steel,Jamshedpur.

Das, S K and Godiwalla, K M and Mehrotra, S P and Dey, P K and Mandal , D and Hegde, Shubha (2006) Mathematical Modelling of ductile erosion behaviour of impacted fly ash particles on steel components of coal fired boiler. In: 60 Annual Technical Meeting, November, 15-16, 2006, NML, Jamshedpur.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2006) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 14-16, 2006, NML, Jamshedpur.

Kumar, Sanjay and Singh, K K and Das, S K and Ramachandrarao, P (2002) Waste Utilisation : Towards Cleaner Environment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Mondal, Sudipta and Pathak, L C and Venkateswarlu, K and Das, S K and Ray, Ajoy K (2002) Development and Characterization of Ag-Cu-Ti Alloys for Ceramic Brazing. In: Proceedings of the Indo-Malaysian Joint Workshop (WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Singh, Raghuvir and Dey, P K and Kumar, A and Das, S K and Ravi Kumar, B and Chattoraj, I (2001) Intergranular Corrosion of Deformed SS304. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Ray, Ashok K and Bandopadhyay, A and Srikanth, S and Das, S K and Antony, M P and Jha, Animesh (2000) Physico-chemical investigations on the sintering behaviour of red mud - flue dust composites. In: Processing of fines: International symposium, November 2-3, 2000, NML Jamshedpur, India.

Bandyopadhyay, D and Pathak, L C and Das, S K and Ravi Kumar, B and Ramachandrarao, P (1997) In-Situ Fabrication of Ceramic Matrix Composites by RH-SHS Technique. In: Proceedings of Golden Jubilee International Conference on Recent Advances in Metallurgical Processes Vol-1, 16-19 July 1997, IIS, Bangalore.

Das, S K (1996) An improved turbulence model for flow simulation in a continuous casting tundish for slabs. In: Proceedings of the National Seminar on Computer Applications in Materials and Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Das, S K and Kumar , Sanjay and Singh, K K and Ramachandrarao, P (1996) An Innovative Approach towards Utilisation of Wastes Generated from Iron & Steel Industries. In: UNSPECIFIED.

Das, S K and Kumar, Sanjay and Singh, K K and Ramachandrarao, P (1996) An Innovative approach towards utilisation of wastes generated from iron & steel industries. In: UNSPECIFIED.

Das, S K and Sarkar, S (1969) Recent developments in Slag-fuming process. In: UNSPECIFIED.

Das, S K (1968) Recent Developments in Slag-Fuming Process. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. I968, National Metallurgical Laboratory (CSIR), Jamshedpur.

Project Reports

Bhattacharya, M and Sahu, Ranjan K and Ghosh, M and Das, S K and Mahato, B K and Goel, R P (2013) Chemical Synthesis of magnetic Co and CoNi nanoparticles and their characterization. Exploratory (OLP). CSIR -NML, Jamshedpur. (Submitted)

Metya, Avijit Kumar and Bar, H N and Parida, N and Das, S K (2011) Failure Analysis of Ball Clevis of 320KN Hardware Fittings. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Metya, Avijit Kumar and Rajnikanth, V and Prakash, Amit and Das, S K (2011) Failure Analysis of Compressor Blade of SU-30MKI(SB-142). Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Ghosh , M and Husain, M M and Das, Goutam and Das, S K and Upadhyay, A K and Singh, S R and Parida, N (2011) Metallurgical Analysis : Ground Incident to MIG-27 ML TS-615. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Ghosh, M and Husain, M M and Das, Goutam and Das, S K and Upadhyay, A K and Singh, S R and Parida, N (2011) Metallurgical Analysis:Flying Accident to Mig-27 ML TS - 579. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Ghosh, M and Singh, S R and Das, S K (2007) Metallurgical Analysis of the Damaged Wheel Hubs of AVRO HS-748 H-1517. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Singh, S R and Das, S K and Gunjan, M K (2007) Flying Accident to Mig-21/C-1129 of MOFTU 'A'/11 Wg/Eac. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, S K and Kumar, B Ravi and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)