Items where Year is 2007
Number of items: 247.
AAbhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2007) Bio-hydrometallurgical approach in processing of low grade Indian uranium ore in Column Reactor. In: Proc. BIOHYDROMET 2007, May 1-2 2007, Falmouth, U.K.. Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2007) Biosorption of trivalent chromium from a model tanning solution by adapted aspergillus niger. In: Proceedings of Mineral Biotechnology-2007, 2007. Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2007) Amenability of low- grade uranium towards column bioleaching by acidithiobacillus ferrooxidans. In: International Seminars in Mineral Processing Technology (MPT 2007), 2007. Agrawal, A and Bagchi, D and Kumari, S and Kumar, Vinay and Pandey, B D (2007) Recovery of nickel powder from copper bleed electrolyte of an Indian copper smelter by electrolysis. Powder Technology, 177 (3). pp. 133-139. Agrawal, A and Kumari, S and Bagchi, D and Kumar, Vinay and Pandey, B D (2007) Recovery of copper powder from copper bleed electrolyte of an Indian copper smelter by electrolysis. Minerals Engineering, 20 (1). pp. 95-97. Agrawal, A and Kumari, S and Ray, B C and Sahu, K K (2007) Extraction of acid and iron values from sulphate waste pickle liquor of a steel industry by solvent extraction route. Hydrometallurgy, 88 (1-4). pp. 58-66. Alex, T C and Godiwalla, K M and Kumar, S and Jana, R K (2007) Extraction of silicomanganese from marine and low grade mineral resources. In: XI International Ferro Alloy Congress, Feb. 18-27, 2007, New Delhi. Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2007) Stirred bead mill grinding of gibbsite:surface and morphological changes. In: The Third Asian Particle Technology Symposium Small Particle Technology, September 3-5, 2007, Beijing, China. Alex, T C and Kumar, Rakesh and Upadhyay, A K and Mishra, T and Mahato, B and Mehrotra, S P (2007) Role of Mineralogy and Origin of Mechanically Activated (Indian) bauxite in Bayer Process. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) BBahadur, Aruna and Mitra, A and Ravi Kumar, B and Palit Sagar, S (2007) Evaluation and Correlation of Residual Stress Measurement in Steel. Evaluation and Correlation of Residual Stress Measurement in Steel , 26 (2-4). pp. 47-55. Balasubramani, N and Srinivasan, A and Pillai, U T S and Pal, B C (2007) Effect of Pb and Sb additions on the precipitation kinetics of AZ91 magnesium alloy. Materials Science and Engineering A, 457 (1-2). pp. 275-281. Balasubramani, N and Suresh, M and Srinivasan, A and Pillai, U T S (2007) Observation of the suppression of Mg17Al12 formation in a La-containing AZ91 alloy. Journal of Materials Science, 42 (19). pp. 8374-8376. Bar, H N and Parida, N and Palit Sagar, S and Ghosh, R N (2007) Evaluation of Prototype Horton Sphere using Acoustic Emission. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Baskaran, Irusen (2007) Preparation and characterization of Nanocrystalline nickel based alloy deposits. PhD thesis, University of Madras. Basu, A and Majumdar, J Dutta and Ghosh Chowdhury, S and AjiKumar, P K and Tyagi, A K and Baldevraj, and Manna, I (2007) Microstructural and texture studies of gas-nitrided Cr-coated low-alloy high-carbon steel. Surface and Coatings Technology, 201 (16-17). pp. 6985-6992. Bhagat, R P (2007) De-Watering of Iron Ore Fine Particles in Aqueous Medium. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur. Bhagat, R P (2007) Improved gravity separation : typical case studies in relation to slimes. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Bhagat, R P and Chattoraj, U S and Goswami, M C and Singh, D P and Sil, S K (2007) Effect of size parameters of mix ingredients on the porosity and reduction characteristics of sinter. Steel Research International, 78 (6). pp. 451-454. Bhagat , R P (2007) Fundamentals of Iron Ore Sintering. In: Processing of Iron Ore , Nov. 28-Dec. 01, 2007, NML, Jamshedpur. Bhaskar Raju, G and Prabhakar, S and Rao, S Subba and Rao, D S and Vijayakumar, T V (2007) Treatment of Tannery Effluents by Electrocoagulation and Flotation. Other (TMP). CSIR-NML, Jamshedpur. (Submitted) Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Gopalakrishna, K (2007) Pilot-scale studies on the treatment of tannery effluents by electroflotation. International Journal of Environment and Pollution (IJEM), 30 (2). pp. 332-344. Bhattacharyya, P and Singh, R and Kumar, Vinod and Chattoraj, U S and Bhattacharyya, K K and Roychaudhury, A (2007) Studies on Efficacy of Multi Gravity Seperator for Beneficiation of Indian Coal Fines. Mineral Processing Technology . pp. 1-5. Bid, S and Sahu, Puspendu and Pradhan, S K (2007) Microstructure characterization of mechanosynthesized nanocrystalline NiFe2O4 by Rietveld's analysis. Physica E: Low-dimensional Systems and Nanostructures, 39 (2). pp. 175-184. Biswas, Somjeet and Sivaprasad, S and Narasaiah, N and Tarafder, S and Chakraborti, P C (2007) Load history effect on FCGR behaviour of 304LN stainless steel. International Journal of Fatigue, 29 (4). pp. 786-791. CChakraborty, D and Ranganathan, S and Sinha, S N (2007) Reduction of Chromite ore at different flow rates of inert gas. INFACON XI . pp. 153-158. Chakravarty, S and Bhattacharjee, S and Gupta, K K and Singh, Manjit and Chaturvedi, Hema T and Maity, S (2007) Adsorption of zinc from aqueous solution using chemically treated newspaper pulp. Bioresource Technology, 98 (16). pp. 3136-3141. Chandrasekhar, S and Sarkar, B and Das, Avimanyu and Chattoraj, U S and Kumar, Vinod and Rao, K V and Bhattacharyya, K K (2007) Analysis of the washability characteristics of low-volatile Indian coking coal with crushing at different top sizes - a case study. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Chattoraj, I (2007) Fundamentals of corrosion and its prevention. In: UNSPECIFIED. Chaturvedi, Hema T and Chakravarty, S and Bhattacharjee, S and Mandhyan, A K (2007) Goethite-arsenite interaction study to understand groundwater arsenic mobilization in the Bengal Delta Plain. In: Water-Rock Interaction, Proceedings, 2007, Water-Rock Interaction. Chaudhary, P N and Minj, R K and Goel, R P (2007) Development of a Process for Dephosphorisation of High Carbon Ferromanganese. In: Innovations in Ferro Alloys Industry, INFACON XI, 2007, India. Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2007) Adsorption of Oleic Acid on Calcium Minerals. In: Mineral Processing Technology- 2007, 22-24 February 2007, Mumbai. DDas, Avimanyu and Roy, Subrata (2007) Comminution - Theory and Plant Practice. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur. Das, Avimanyu and Roy, Subrata (2007) Magnetic Separation - Principles and Application in Beneficiation of Iron Ores. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur. Das, Suchandan K and Godiwalla, K M and Mehrotra, S P (2007) A mathematical model for prediction of physical properties of the coke oven charge during carbonisation. High Temperature Materials and Processes, 26 (1). pp. 43-57. Das, Suchandan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharyya, K K and Singh, Ratnakar and Mehrotra, S P (2007) Mathematical modeling of separation characteristics of a coal-washing spiral. International Journal of Mineral Processing, 84 (1-4). pp. 118-132. Das, Suchandan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharyya, K K and Singh, Ratnakar and Mehrotra, S P (2007) Mathematical modelling of bagnold effect and separation behavior of a coal-washing spiral using a mechanistic approach. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Das, Swapan K (2007) Fracture Behaviour of Copper Strengthened HSLA Steel. PhD thesis, Bengal Engineering and Science University. Das, Swapan K and Mukhopadhyay, N K and Ravi Kumar, B and Bhattacharya, D K (2007) Failure analysis of a passenger car coil spring. Engineering Failure Analysis, 14 (1). pp. 158-163. Das, Swapan K and Narasaiah, N and Sivaprasad, S and Chatterjee, S and Tarafder, S (2007) Effect of aging on fatigue crack growth behaviour of Cu bearing HSLA-100 steel. Materials Science and Technology, 23 (2). pp. 177-182. Das, Swapan K and Sasikumar, C and Ravi Kumar, B (2007) Failure of evaporator tubes initiated by lamellar tearing during the commissioning of a waste heat recovery boiler. Engineering Failure Analysis, 14 . pp. 262-278. Das, Swapan K and Tarafder, S and Panda, A K and Chatterjee, S and Mitra, A (2007) Magnetic and mechanical properties of Cu-strengthened aged HSLA-100 steel. Philosophical Magazine, 87 (32). pp. 5065-5078. Das, T K and Mandal, S K (2007) Design of microcontroller based instrumentation scheme for on-line monitoring and measurement of ambient temperature and relative humidity. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Dey, Shobhana and Bhattacharya, S (2007) Effect of frother type in collectorless flotation of two high-rank coking coals of Gondwana origin. Coal Preparation, 27 (1-3). pp. 4-27. Dey, Shobhana and Bhattacharyya, K K (2007) Split and collectorless flotation to medium coking coal fines for multi-product zero waste concept. Fuel Processing Technology, 88 (6). pp. 585-590. Director, NML (2007) Annual Report 2006-2007. NML, Jamshedpur. ISBN 0972-4273 GGhosh, M and Singh, S R and Das, S K (2007) Metallurgical Analysis of the Damaged Wheel Hubs of AVRO HS-748 H-1517. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted) Ghosh, M and Singh, S R and Das, Swapan K (2007) Failure Investigation of Nose Jack Mounting Bracket of AVRO Aircraft H-1517. Other (TMP). CSIR-NML, Jamshedpur. (Submitted) Ghosh, R N (2007) NDE Centre for Infrastructure Asset Management. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted) Ghosh, R N and Vaish, A K and Singh, S R and Ghosh Chowdhury, S and Humane, M M and De, P K and Minj, R K and Kumar, B Ravi (2007) High Strength Formable Steels for Automobile Applications. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted) Ghosh, Rita and Singh, D D N (2007) Kinetics, mechanism and characterisation of passive film formed on hot dip galvanized coating exposed in simulated concrete pore solution. Surface and Coatings Technology, 201 (16-17). pp. 7346-7359. Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Sivaprasad, S and Singh, S R and Ghosh, R N (2007) Failure Analysis of LP turbine free standing blade. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted) Ghosh Chowdhury, S and Datta, Sudarsan and Ravi Kumar, B and De, P K and Ghosh, R N (2007) Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel. Materials Science and Engineering A, 443 (1-2). pp. 114-119. Ghosh Chowdhury, S and Ray, R K and Jena, A K (2007) Deformation-induced structural transformation in boron-doped Ni76Al24. Intermetallics, 15 (3). pp. 260-269. Goswami, B and Ravi Kumar, B and Tarafder, S and Guguloth, K and Rupa, P K P and Kumar, S B and Ray, Ashok K (2007) Fatigue damage of a thermal barrier coated Ni-base superalloy. High Temperature Materials and Processes, 26 (3). pp. 209-219. Goswami, B and Ray, Ashok K (2007) Studies on certain aspect of superconductivity with reference to high Tc superconductors. Journal of Metallurgy and Materials Science, 49 (4). pp. 183-213. Goswami, M C (2007) Physical and Physico - Chemical Characterization of Iron Ore Agglomerates. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur. Guguloth, K (2007) Application of stress-relaxation testing method for evaluation of creep properties and remaining life asse-ssment of high temperature alloys. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Gupta, R K and Mehrotra, S P and Gupta, Santosh K (2007) Evaluation and optimization of metal matrix composite strip produced by single roll continuous strip casting method. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 465 (1-2). pp. 116-123. HHore, S and Das, Suchandan K and Godiwalla, K M and Bhattacharyya, K K and Singh, Ratnakar (2007) Modelling performance of water-only cyclone as a gravity separator for fine coal cleaning. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. JJha, Manis K and Kumar, Vinay and Bagchi, D and Singh, R J (2007) Processing of rayon waste effluent for the recovery of zinc and separation of calcium using thiophosphinic extractant. Journal of Hazardous Materials, 145 (1-2). pp. 221-226. Jha, Manis K and Kumar, Vinay and Lee, Jae-chun (2007) Processing of electroplating effluent for the recovery of zinc and chromium using ion exchange technique. In: Proceedings of International Symposium of resource recycling, 2007, resource recycling. KKar, Abhijit and Chaudhuri, S and Sen, Pratik K and Ray, Ajoy K (2007) Evaluation of hardness of the interfacial reaction products at the alumina–stainless steel brazed interface by modeling of nanoindentation results. Scripta Materialia, 57 (9). pp. 881-884. Kar, Abhijit and Ghosh, M and Ghosh, R N and Ray, Ajoy K (2007) Comparative study of tin lead and lead free solder joint interface. In: 2 nd International Conference on Recent Advances in Composite Materials (ICRACM-2007), February, 20-23, 2007, New Delhi. Kar, Abhijit and Ghosh, M and Majumdar, Bhaskar S and Ghosh, R N and Ray, Ajoy K (2007) Interfacial microstructure, shear strength and electrical conductivity of Sn-3 center dot 5Ag-o center dot 5In/Cu lead free soldered joints. Materials Technology, 32 (3). pp. 161-165. Kar, Abhijit and Ghosh, M and Ray, Ajoy K and Ghosh, R N (2007) Effect of copper addition on the microstructure and mechanical properties of lead free solder alloy. Materials Science and Engineering A, 459 (1-2). pp. 69-74. Kar, Abhijit and Mandal, Sudipta and Ghosh, R N and Ghosh, T K and Ray, Ajoy K (2007) Role of Ti diffusion on the formation of phases in the Al2O3-Al2O3 brazed interface. Journal of Materials Science, 42 (14). pp. 5556-5561. Kar, Abhijit and Mandal, Sudipta and Venkateswarlu, K and Ray, Ajoy K (2007) Characterization of interface of Al2O3–304 stainless steel braze joint. Materials Characterization, 58 (6). pp. 555-562. Kar, Abhijit and Palit Sagar, S and Ray, Ajoy K (2007) Characterization of the ceramic–metal brazed interface using ultrasonic technique. Materials Letters, 61 (19-20). pp. 4169-4172. Kar, Abhijit and Ray, Ajoy K (2007) Characterization of Al2O3–304 stainless steel braze joint interface. Materials Letters, 61 (14-15). pp. 2982-2985. Khanra, A K and Godkhindi, M M and Pathak, L C (2007) Sintering behaviour of ultra-fine titanium diboride powder prepared by self-propagating high-temperature synthesis (SHS) technique. Materials Science and Engineering A, 454-455 . pp. 281-287. Khanra, A K and Pathak, L C and Godkhindi, M M (2007) Carbothermal synthesis of zirconium diboride (ZrB2) whiskers. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 106 (3). pp. 155-160. Khanra, A K and Pathak, L C and Godkhindi, M M (2007) Microanalysis of debris formed during electrical discharge machining (EDM). Journal of Materials Science, 42 (3). pp. 872-877. Khanra, A K and Sarkar, B R and Bhattacharya, B and Pathak, L C and Godkhindi, M M (2007) Performance of ZrB2–Cu composite as an EDM electrode. Journal of Materials Processing Technology, 183 (1). pp. 122-126. Konar, J and Gupta , K K (2007) Analysis of Iron Ores. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur. Konar, J and Upadhyay, A K and Gupta, K K and Chakravarty, S (2007) Studies on Characterization of Mine Samples. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted) Konar, J and Upadhyay, A K and Pimple, S and Chakravarty, S and Gupta, K K (2007) Analysis of major and minor elements in coal and siliceous materials using microwave digestion and AAS technique. Journal of Metallurgy and Materials Science, 49 (1). pp. 45-50. Krishna, K Gopala and Manoharan, T C and Kumar, Satender (2007) Effect of Cryo-Deformation on Aging Characteristics of Age-Hardenable Aluminium Alloys. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Kumar, Ambuj (2007) Biomimetic synthesis and characterization of cobalt nanoparticles. Masters thesis, CSIR-National Metallurgical Laboratory (NML). Kumar, Manoj and Kumar, Vinay and Singh, T B and Bagchi, D and Konar, J (2007) Production of copper powder from industrial wastes. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Kumar, Manoj and Mankhand, T R and Murthy, D S R and Mukhopadhyay, R and Prasad, P M (2007) Refining of a low-grade molybdenite concentrate. Hydrometallurgy, 86 (1-2). pp. 56-62. Kumar, Rakesh and Alex, T C and Mishra, C R and Roy, S K and Mehrotra, S P (2007) Towards Sustainable Alumina Production. In: National Seminar on Environmental Concern and Remedies in Alumina Industry, January 27-28, 2007, NML, Jamshedpur. Kumar, Rakesh and Kumar, Sanjay and Das, Avimanyu and Mishra, T K and Cholavandan, V and Mehrotra, S P (2007) Studies on Reactivity of Classified and Mechanically activated fly Ash. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2007) Towards sustainable solutions for fly ash through mechanical activation. Resources, Conservation and Recycling, 52 (2). pp. 157-179. Kumar, S and Rao, B N and Pradhan, B (2007) Effect of impactor parameters and laminate characteristics on impact response and damage in curved composite laminates. Journal of Reinforced Plastics and Composites, 26 (13). pp. 1273-1290. Kumar, Sanjay (2007) Studies on the Geopolymerisation of Fly ash with and without Granulated Blast Furnace Slag. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Kumar, Sanjay and Kumar, Rakesh and Alex, T C and Bandopadhyay, A and Mehrotra, S P (2007) Influence of reactivity of fly ash on geopolymerisation. Advances in Applied Ceramics, 106 (3). pp. 120-127. Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A and Mehrotra, S P (2007) Novel geopolymeric building materials through synergistic utilisation of industrial waste. In: International conference alkali activated materials: research, production and utilization, 2007, Prague. Kumar, Vinay and Bagchi, D and Pandey, B D (2007) hydrometallurgical recovery of copper and nickel powders from the copper bleed solution of indian sea nodules. Korea on Minerals and Materials Processing and Utilization, 11 (1). pp. 56-63. Kumar, Vinay and Kumar, Manoj and Bagchi, D and Jha, Manis K and Jeong, Jinki and Lee, Jae-chun (2007) Solvent Extraction Studies for Removal of Hazardous Metals from the Sulfate Leach Solution of Electronic Wastes. Proceedings of International Symposium of resource recycling . pp. 138-143. Kumar, Vinod and Jadhav, G N and Khosla, N K and Chattoraj, U S and Singh, Ratnakar and Bhagat, R P and Nayak, B and Mohanta, M K and Bhattacharyya, K K and Mehrotra, S P (2007) Characterization and its implication on beneficiation of low grade iron ore by gravity separation. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. MMaity, S K and Ballal, N B and Kawalla, R (2007) Development of process for thermo-mechanical treatment of ultrahigh strength steel prepared by electroslag refining. Ironmaking & Steelmaking, 34 (4). pp. 332-342. Malathi, M and Deo, Brahma and Prasad, N and Sukla, A K and Boom, Rob (2007) Theoretical and Practical Aspects of Lance Skulling and Slag Foaming in BOF Vessels. In: AISTech Conference Proceedings, May 7-10, 2007, Indiana Convention Center, Indianapolis, Ind., USA. Mandal, D and Dutta, B K and Panigrahi, S C (2007) Dry sliding wear behavior of stir cast aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (7). pp. 2417-2425. Mandal, D and Dutta, B K and Panigrahi, S C (2007) Effect of coating on the wear properties of stir cast Al–2Mg base short steel fiber reinforced composites. Materials Science and Engineering A, 460-461 . pp. 485-493. Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801. Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801. Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites. Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites , 42 (20). pp. 8622-8628. Mandal, D and Dutta, B K and Panigrahi, S C (2007) Processing and mechanical properties of Al, A-Mg-2 and Al-Cu-4 alloy base short steel fibre reinforced composites prepared by vortex method. Materials Science and Technology, 23 (1). pp. 23-28. Mandal, G K and Batra, N K and Mehrotra, S P (2007) Sulphur control of blast furnace hot metal by manganese additions. Transaction of the Indian Institute of Metals, 60 (1). pp. 45-52. Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2007) Microstructural Study of Galvanized coatings formed in Pure as well as Commercial Grade Zn Baths. In: International Conference on Metals and Alloys : Past, Present and Future Metallo-2007, Dec. 7-10, 2007, NML, Jamshedpur. Mandhyan, A K (2007) Corrosion of metals and its prevention. In: Training programme on industrial corrosion: evaluation and mitigation,, 5-7 December 2007, CSIR-NML. Mandhyan, Mala and Parmar, Kavita and Mandhyan, A K (2007) Eco-friendly inhibition of mild steel in acidic media. Journal of Metallurgy and Materials Science, 49 (2). pp. 123-128. Manoharan, S S and Singh, Brajendra and Sahu, Ranjan K (2007) Powder neutron diffraction evidence for enhanced inter plane magnetic coupling in La(1.2)Sr(1.8)Mn(2-x)Ru(x)O(7) layered manganites. Journal of Applied Physics, 101 (9). Mehrotra, S P (2007) Realm of Mechanochemistry in Extractive Metallurgy - Scientific Curiosity to Commercial Reality. Transactions of the Indian Institute of Metals, 60 (1). pp. 1-13. Metya, Avijit Kumar and Parida, N and Bhattacharya, D K and Bandopadhyay, N R and Palit Sagar, S (2007) Assessment of Localized Plastic Deformation during Fatigue in Polycrystalline Copper by Nonlinear Ultrasonic. Metallurgical and Materials Transactions A, 38 (12). pp. 3087-3092. Mishra, Suman K and Das, Swapan K and Sherbacov, V (2007) Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: A novel approach. Composites Science and Technology, 67 (11-12). pp. 2447-2453. Mishra, Suman K and Rupa, P K P and Das, Swapan K and Shcherbakov, V (2007) Effect of titanium diluent on the fabrication of Al2O3–ZrB2 composite by SHS dynamic compaction. Composites Science and Technology, 67 (7-8). pp. 1734-1739. Mishra, Suman K and Rupa, P K P and Pathak, L C (2007) Surface and nanoindentation studies on nanocrystalline titanium diboride thin film deposited by magnetron sputtering. Thin Solid Films, 515 (17). pp. 6884-6889. Mishra, Suman K and Shekhar, Chander and Rupa, P K P and Pathak, L C (2007) Effect of pressure and substrate temperature on the deposition of nano-structured silicon–carbon–nitride superhard coatings by magnetron sputtering. Thin Solid Films, 515 (11). pp. 4738-4744. Mishra, T and Hait, Jhumki and Noor, Aman and Jana, R K and Chakravarty, S (2007) Effect of UV and visible light on photocatalytic reduction of lead and cadmium over titania based binary oxide materials. Journal of Colloid and Interface Science, 316 (1). pp. 80-84. Mitra, A and Mohapatra, J N and Swaminathan, J and Ghosh, M and Panda, A K and Ghosh, R N (2007) Magnetic evaluation of creep in modified 9Cr–1Mo steel. Scripta Materialia, 57 (9). pp. 813-816. Mohan, B M and Ghosh, Arpita (2007) Influence of cross-point level of membership functions in fuzzy two-term control. International Journal of Automation and Control , 1 (2/3). pp. 133-144. Mohan, B M and Ghosh, Arpita (2007) On the simplest fuzzy two - term controller structure derived via algebraic product t-norm -bounded sum t-conorm - Mamdani minimum inference combination. IEEE Proceedings on Industrial and Information Systems . pp. 97-100. Mohanta, M K (2007) Geochemistry of Iron Ores. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur. Mohanta, M K and Rath, R K and Dey, Shobhana and Bhattacharyya, K K (2007) Nanometer Thick Microplaty Hematite in Indian Iron Ores: Its Implication on Washing. In: International Seminar on Mineral Processing Technology (MPT-2007), February 22-24, 2007, Indian Institute of Technology, Bombay. Mohanty, Ashok and Patra, Trilochan and Dey, Joykrishna (2007) Salt-Induced Vesicle to Micelle Transition in Aqueous Solution of Sodium N-(4-n-Octyloxybenzoyl)-l-valinate. The Journal of Physical Chemistry B, 111 (25). pp. 7155-7159. Mohapatra, J N and Panda, A K and Gunjan, M K and Bandopadhyay, N R and Mitra, A and Ghosh, R N (2007) Ageing behavior study of 5Cr–0.5Mo steel by magnetic Barkhausen emissions and magnetic hysteresis loop techniques. NDT & E International, 40 (2). pp. 173-178. Mukherjee, K and Prakash, S and Sinha, S N and Mehrotra, S P (2007) Cold simulation of metalloids transport in blast furnaces. Steel Research International, 78 (4). pp. 281-289. Mukhopadhyay, Amartya and Basu, Bikramjit and Das Bakshi, Srimanta and Mishra, Suman K (2007) Pressureless sintering of ZrO2–ZrB2 composites: Microstructure and properties. International Journal of Refractory Metals and Hard Materials, 25 (2). pp. 179-188. Muthukumar, M and Karuppiah, P T and Bhaskar Raju, G (2007) Electrochemical removal of CI Acid orange 10 from aqueous solutions. Separation and Purification Technology, 55 (2). pp. 198-205. NNayak, B (2007) Mineralogical Characterization of Iron Ores. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur. Nayar, S and Sinha, Arvind (2007) Biomimetic route to hybrid nano-Composite scaffold for tissue engineering. In: Nanoscience and Nanotechnology Initiative (NSTI), 21-23 February, 2007, Katriya Hotel & Towers, Hyderabad. Nickson, R and Sengupta, C and Mitra, P and Dave, S N and Banerjee, A K and Bhattacharyya, A and Basu, S and Kakoti, N and Moorthy, N S and Wasuja, M and Kumar, M and Mishra, D S and Ghosh, A and Vaish, D P and Srivastava, A K and Tripathi, R M and Singh, S N and Prasad, R and Bhattacharjee, S and Deverill, P (2007) Current knowledge on the distribution of arsenic in groundwater in five states of India. Journal of Environmental Science and Health Part A-Toxic/Hazardous Substances & Environmental Engineering, 42 (12). pp. 1707-1718. PPal, J and Ghosh, S and Goswami, M C and Singh, D P and Kumar, Manoj and Minj, R K and Upadhyay, A K (2007) Role of direct reduced iron fines in nitrogen removal from electric arc furnace steel. Steel Research International, 78 (8). pp. 588-594. Pal, S C and Mehta, K D and Abhilash, and Kumar, Vinay and Pandey, B D and Mankhand, T R (2007) Copper biodissolution from a low grade chalcopyrite ore by unadapted/adapted acidithiobacillus ferrooxidans. In: Proceedings of Mineral Biotechnology - 2007, 2007. Pal, Sital K and Prakash, S and Madhukar, A and Mehrotra, S P (2007) Evaluation of intellectual property asset value. International Journal of Intellectual Property Management, 1 (3). pp. 171-183. Panda, A K and Das, Swapan K and De, P K and Mitra, A (2007) Sintering behaviour of magnetic bulk glassy cores obtained from Fe71Nb3.7Cu1Al3Mn0.8Si13.5B7 alloy powder. Journal of Materials Processing Technology, 184 (1-3). pp. 300-304. Panda, A K and Ghosh, M and Kumar, Arvind and Singh, S R and Mitra, A (2007) Development of Ferromagnetic Shape Memory Alloys by Rapid Solidification Route. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Panda, A K and Kumari, Seema and Chattoraj, I and Ghosh, M and Mitra, A (2007) Electron transport properties of Co71−xFexCr7Si8B14 (x=0, 2, 3.2, 4, 6,8 and 12 at%) amorphous alloys during devitrification. Journal of Magnetism and Magnetic Materials, 308 (1). pp. 65-70. Panda, A K and Mitra, A (2007) Deformation Behaviour Study of Micro-alloyed Steel by Magnetic Hysteresis Techniques. In: International Conference on Microalloying: Emerging Trends (Mcroalloying-2007, 9-11 March, 2007, Bengal engineering college and science , Howrah. Panda, A K and Mohanta, Ojaswini and Kumar, A and Ghosh, M and Mitra, A (2007) A Potential Co36Fe36Si4B20Nb4 nanocrystalline alloy for high temperature soft magnetic applications. Philosophical Magazine, 87 (11). pp. 1671-1682. Panda, A K and Mohanta, Ojaswini and Mitra, A and Jiles, D C and Lo, C C H and Melikhov, Y (2007) Soft magnetic properties of a high temperature CoFeSiBNb nanocrystalline alloy. Journal of Magnetism and Magnetic Materials, 316 (2). pp. 886-889. Pandey, B D and Kumar, Vinay and Mehta, K D and Abhilash, (2007) Final Project Completion Report For CORE-0020 Project (under CSIR's Tenth Five Year Plan: 2002-2007). Grant in Aid (GAP). NML, Jamshedpur. (Submitted) Pandey, B D and Kumar, Vinay and Mehta, K D and Sahu, S K and Abhilash, (2007) Project Completion Report for the Network Project entitled Treatment/Bioremediation of Electroplating and Leather Tanning Effluents Containing Chromium COR – 008 (ILP – 013) {A Network Project of CSIR, New Delhi under Xth Five Year Plan}. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted) Pandey, B D and Kumar, Vinay and Sahu, S K and Mehta, K D and Agrawal, A and Bagchi, D and Maharaj, L (2007) Treatment/Bioremmediation of Electroplating and Leather Tanning Effluents Containing Chromium. Other (TMP). CSIR-NML, Jamshedpur. (Submitted) Pandey, B D and Mehta, K D and Kumar, Vinay and Singh, S and Giri, A K (2007) Biomineral Processing for Extraction of Metal Values from Ores/Concentrates/Wastes. Other (TMP). CSIR-NML, Jamshedpur. (Submitted) Parida, N (2007) NDE techniques for corrosion monitoring in industrial systems. In: UNSPECIFIED. Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Effect of temperature on the fretting corrosion of tin plated copper alloy contacts. Wear, 262 (3-4). pp. 320-330. Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Fretting corrosion of tin-plated contacts: Evaluation of surface characteristics. Tribology International, 40 (3). pp. 548-559. Poddar, Palash and Srivastava, V C and De, P K and Sahoo, K L (2007) Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Materials Science and Engineering A, 460-461 . pp. 357-364. Prakash, S and Mukherjee, K and Singh, S and Mehrotra, S P (2007) Simulation of energy dynamics of electric furnace steelmaking using DRI. Ironmaking & Steelmaking, 34 (1). pp. 61-70. Prasad, K and Kumari, K and Lily, and Chandra, K P and Yadav, K L and Sen, S (2007) Glass-like response of (Na1/2Bi1/2)TiO3–WO3 ceramic. Solid State Communications, 144 (1-2). pp. 42-45. Prasad, K and Lily, and Kumari, K and Chandra, K P and Yadav, K L and Sen, S (2007) Electrical properties of a lead-free perovskite ceramic: (Na0.5Sb0.5)TiO3. Applied Physics A: Materials Science & Processing, 88 (2). pp. 377-383. Prasad, K and Lily, and Kumari, K and Chandra, P and Yadav, K L and Sen, S (2007) Electrical properties of a lead-free perovskite ceramic: (Na0.5Sb0.5)TiO3. Applied Physics A-Materials Science & Processing, 88 (2). pp. 377-383. Prasad, Sanjay and Minj, R K and Maharaj, L (2007) Extraction of Chromium from Stainless Steel Dust. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) RRajnikanth, V and Jindal, Vikas and Akkimardi, V G and Ghosh, M and Venkateswarlu, K (2007) Transmission electron microscopy studies on the effect of strain on Al and Al–1% Sc alloy. Scripta Materialia, 57 (5). pp. 425-428. Randhawa, N S and Jana, R K and Agarwal, Sanjay and Ghorai, S and Maity, S K and Pal, J (2007) Production of Fe-Si-Mn from leached sea nodule residue. In: Inter. Sem. on Mineral Processing Technology, 2007, 22-24 Feb, 2007, IIT Mumbai. Ranganathan, S (2007) Investigations on the Reduction of Chromite Ores at Low Temperatures. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Ranganathan, S and Godiwalla, K M (2007) Optimisation of Specific Power Consumption in the Prod-uction of Ferro-chromium at Rohit Ferro Tech Ltd., Bishnupur. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted) Rao, Ananda and Srikanth, S and Mehrotra, S P and Ravi Kumar, B and Alex, T C and Ghosh, M and Das, Swapan K (2007) Effect of Strain on Melting Point of Lead produced by Mechanical Milling. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2007) Effects of oxidation of minerals on physico-chemical properties pertaining to gravity separation. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Rao, K V and Dey, Shobhana (2007) Comparative Studies of Different Frothers vis-a-vis Lowering of Ash Content in a Coking Coal from West Bokaro, India. IE(I) Journal-MN, 87 . pp. 10-12. Rath, R K and Dey, Shobhana and Mohanta, M K and Singh, Ratnakar and Kumar, Vinod and Bhattacharyya, K K (2007) Processing of low grade iron ore from Singhbhum-north Orissa craton using gravity concentration techniques. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Rath, R K and Singh, Ratnakar (2007) Gravity Concentration of Iron Ore. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur. Ravi Kumar, B (2007) Influence of Cold Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. METALLURGICAL AND MATERIALS TRANSACTIONS A, 38A (9). pp. 2085-2094. Ravi Kumar, B and Das, Swapan K and Mahato, B and Das, Arpan (2007) Effect of large strains on grain boundary character distribution in AISI 304L austenitic stainless steel. Materials Science and Engineering A, 454-455 . pp. 239-244. Ravi Kumar, B and Ghosh, M (2007) Surface and mid-plane texture evolution in austenite phase of cold rolled austenitic stainless steels. Materials Science and Engineering A, 457 (1-2). pp. 236-245. Ravi Kumar, B and Ghosh Chowdhury, S and Narasaiah, N and Mahato, B and Das, Swapan K (2007) Role of Grain Boundary Character Distribution on Tensile Properties of 304L Stainless Steel. Metallurgical and Materials Transactions A, 38 (5). pp. 1136-1143. Ravi Kumar, B and Mahato, B and Singh, Raghuvir (2007) Influence of Cold-Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. Metallurgical and Materials Transactions A, 38 (9). pp. 2085-2094. Ray, Ajoy K and Kar, Abhijit and Ghosh, M (2007) Microstructural characterization of tin lead and lead free solder joint interface. In: Inter. Symp. on Advanced Materials and Processing, ISAMP-2007, 29-30 Oct. 2007, Basaveshwar Engineering College, Bagalkot.. Ray, Ashok K and Diwakar, K and Prasad, B N and Tiwari, Y N and Ghosh, R N and Whittenberger, J D (2007) Long term creep–rupture behaviour of 813 K exposed 2.25–1Mo steel between 773 and 873 K. Materials Science and Engineering A, 454-455 . pp. 124-131. Ray, Ashok K and Dwarakadasa, E S and Das, D K and Ranganath, V R and Goswami, B and Sahu, J K and Whittenberger, J D (2007) Fatigue behavior of a thermal barrier coated superalloy at 800°C. Materials Science and Engineering A, 448 (1-2). pp. 294-298. Ray, Ashok K and Tiwari, Y N and Roy, P K and Chaudhuri, S and Bose, S C and Ghosh, R N and Whittenberger, J D (2007) Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant. Materials Science and Engineering A, 454-455 . pp. 679-684. Roy, A and Sahoo, K L and Chattoraj, I (2007) Electrochemical response of AlNiLa amorphous and devitrified alloys. Corrosion Science, 49 (6). pp. 2486-2496. Roy, A and Tarafder, S and Sivaprasad, S and Das, Swapan K and Manna, I and Chattoraj, I (2007) Fatigue crack growth retardation in an HSLA steel in benign environments. International Journal of Fatigue, 29 (2). pp. 254-260. Roy, Nilima and Ghosh, R N and Bose, S C and Swaminathan, J (2007) A Stochastic Model for Assessment of Creep damage. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted) Roy, S and Das, Avimanyu and Venkatesh, A S (2007) Characterisation of iron ore from the Jilling area of eastern India with a view to beneficiation. Iron Ore Conference 2007, Proceedings . pp. 179-186. Roy, Subrata and Das, Avimanyu (2007) Feasibility of Producing Pellet Grade Concentrate by Beneficiation of Iron Ore Slime in India. Separation Science and Technology, 42 (14). pp. 3271-3287. Roy, Subrata and Das, Avimanyu and Sarkar, B and Bhattacharyya, K K (2007) Separation response of iron ores during gravity concentration. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Rudrakshi, G B and Srivastava, V C and Ojha, S N (2007) Microstructural development in spray formed Al–3.5Cu–10Si–20Pb alloy and its comparative wear behaviour in different environmental conditions. Materials Science and Engineering A, 457 (1-2). pp. 100-108. Rupa, P K P and Mishra, Suman K and Pathak, L C and Ghosh, R N (2007) Nanoindentation Studies of TiB2 films. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) SSahay, S K and Goswami, B and Kumar, S B and Ray, Ashok K (2007) Fatigue behaviour in titanium-based alloys. Journal of Metallurgy and Materials Science, 49 (2). pp. 97-122. Sahay, S K and Goswami, B and Ray, Ashok K (2007) Development of cobalt-base alloys for high temperature applications. Journal of Metallurgy and Materials Science, 48 (1). pp. 1-38. Sahay, S K and Kumar, S B and Goswami, B and Ray, Ashok K (2007) Recent developments in tungsten carbide-cobalt base cemented carbides. Journal of Metallurgy and Materials Science, 49 (3). pp. 143-173. Sahay, S K and Singh, S K and Goswami, B and Kumar, S B and Ray, Ashok K (2007) Recent development in cobalt-base metallic glasses. Journal of Metallurgy and Materials Science, 48 (2). pp. 59-96. Sahoo, K L and Poddar, Palash and Das, Goutam and Ravi Kumar, B (2007) Crystallization behaviour and mechanical properties of rapidly solidified Al87.5Ni7Mm5Fe0.5 amorphous alloy. Journal of Materials Science, 42 (16). pp. 6665-6671. Sahoo, K L and Sahu, Rina and Mitra, A (2007) Kinetic aspects of the nanocrystallization and evolution of microhardness in Al92-XNi8LaX amorphous alloys. Materials and Manufacturing Processes, 22 (4). pp. 497-501. Sahoo, K L and Wollgarten, M and Banhart, J (2007) Effect of solidification rate and composition on microstructure and crystallization in Al-Ni-La metallic glasses. Transaction of Indian Institute of Metals, 60 (2). pp. 349-354. Sahu, K K and Agrawal, A and Mishra, D and Mehrotra, S P (2007) Recovery of Molybdenum and Vanadium from spent Hydro-processing Catalyst. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Sahu, Puspendu and Hamada, A S and Ghosh, R N and Karjalainen, L P (2007) X-ray Diffraction Study on Cooling-Rate-Induced γfcc→εhcp Martensitic Transformation in Cast-Homogenized Fe-26Mn-0.14C Austenitic Steel. Metallurgical and Materials Transactions A, 38 (9). pp. 1991-2000. Sahu, Puspendu and Hamada, A S and Ghosh Chowdhury, S and Karjalainen, L P (2007) Structure and microstructure evolution during martensitic transformation in wrought Fe-26Mn-0.14C austenitic steel: an effect of cooling rate. Journal Of Applied Crystallography, 40 (2). pp. 354-361. Sahu, Puspendu and Singh, S R and Mahato, B and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and Ghosh, R N (2007) y-y' Lattice misfit and its influence on the microstru-cture of UDIMET 520 during the rejevenation heat treatment : an X-ray diffraction study. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Sahu, S K and Pandey, B D and Kumar, Vinay (2007) Recovery of Cu and Ni from a Secondary Resource by Hydrometallurgical Route. In: International Seminar on Mineral Processing Technology (MPT-2007), February 22-24, 2007, Indian Institute of Technology, Bombay. Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2007) Fretting-corrosion mapping of tin-plated copper alloy contacts. Wear, 262 (1-2). pp. 228-233. Sarkar, B (2007) Analysis of Particle Dynamics in Floatex Density Separator. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Sarkar, B and Chandrasekhar, S and Das, Avimanyu (2007) Advanced gravity separators - A review of state of the art technology. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Sasikumar, C and Rao, D S and Srikanth, S and Mukhopadhyay, N K and Mehrotra, S P (2007) Dissolution studies of mechanically activated Manavalakurichi ilmenite with HCl and H2SO4. Hydrometallurgy, 88 (1-4). pp. 154-169. Satendra, Kumar and Sankara Narayanan, T S N and Manimaran, A and Suresh Kumar, M (2007) Effect of lead content on the dezincification behaviour of leaded brass in neutral and acidified 3.5% NaCl solution. Materials Chemistry and Physics, 106 (1). pp. 134-141. Sen, S (2007) Preparation and Evaluation of Structural, Microstructural and Electrical Properties of Polymer-Ceramic Composite. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Sen, S and Choudhary, R N P (2007) Dielectric relaxation in Sr modified PST ceramics. Applied Physics A: Materials Science & Processing, 87 (4). pp. 727-731. Sen, S and Choudhary, R N P and Pramanick, P (2007) Structural and electrical properties of Ca2+-modified PZT electroceramics. Physica B: Condensed Matter, 387 (1-2). pp. 56-62. Sen, S and Das, Swapan K and Mishra, Suman K and Tarafder, A (2007) Low-temperature synthesis of 0.65 PbMg1/3Nb2/3O3-0.35PbTiO(3) ceramics. Journal of the American Ceramic Society, 90 (8). pp. 2634-3638. Senthilkumar, M and Muthukumar, M (2007) Studies on the possibility of recycling reactive dye bath effluent after decolouration using ozone. Dyes and Pigments, 72 (2). pp. 251-255. Singh, Brajendra and Manoharan, S S and Sahu, Rina and Krishnan, P S R and Shinde, A B and Jain, Karishma (2007) Low temperature neutron diffraction studies showing evidence for charge-exchange-type magnetic ordering in Mn doped SrRuO(3). Journal of Applied Physics, 101 (9). Singh, D D N (2007) Corrosion inhibitors. In: Training programme on industrial corrosion: evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 119-134. Singh, K A and Pathak, L C and Roy, S K (2007) Effect of citric acid on the synthesis of nano-crystalline yttria stabilized zirconia powders by nitrate–citrate process. Ceramics International, 33 (8). pp. 1463-1468. Singh, Manjit and Bhattamishra, A K (2007) Effect of some thiourea and quinoline derivatives on corrosion of mild steel in sulphuric acid at different temperatures. Journal of Metallurgy and Materials Science, 49 (1). pp. 39-44. Singh, Navin Kumar and Pramanick, A K (2007) Study of cementite and ferrite interface by AFM. Training Report (TR). CSIR-NML, Jamshdpur. (Unpublished) Singh, Raghuvir (2007) Corrosion evaluation and monitoring practices. In: Training programme on industrial corrosion: evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 48-67. Singh, Raghuvir and Dahotre, N B (2007) Corrosion degradation and prevention by surface modification of biometallic materials. Journal of Materials Science-Materials in Medicine, 18 (5). pp. 725-751. Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, S K and Kumar, B Ravi and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, Swapan K and Ravi Kumar, B and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Singh, Raghuvir and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and De, P K and Chattoraj, I (2007) The importance of grain size relative to grain boundary character on the sensitization of metastable austenitic stainless steel. Scripta Materialia, 57 (3). pp. 185-188. Singh, Ratnakar and Bhattacharyya, P and Bhattacharyya, K K (2007) Studies on Recovery of Mineral Values using an Enhanced Gravity Separator. Advanced Gravity Separation . pp. 1-6. Singh, Ratnakar and Maulik, S C and Rath, R K and Dey, Shobhana and Das, Avimanyu and Nayak , B and Bhattacharyya, K K (2007) Designing Process for Beneficiation of Low Grade Iron Ore Samples from Orissa. In: International Conference on Mineral Processing Technology (MPT – 2007), 2007. Singh, Ratnakar and Mehrotra, S P (2007) Iron Ore Resources and Beneficiation Practices. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur. Singh, S R (2007) Material Equivalence of Russain Materials for Invar Missile. Consultancy (CNP). CSIR-NML, Jamshedpur. (Submitted) Singh, S R and Das, S K and Gunjan, M K (2007) Flying Accident to Mig-21/C-1129 of MOFTU 'A'/11 Wg/Eac. Other (TMP). CSIR-NML, Jamshedpur. (Submitted) Singh, S R and Das, Swapan K (2007) Failure Analysis of Cables of Undercarriage Door Control Mechanism : AN-32 Aircraft. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted) Singh, T B and Alex, T C and Mishra, D and Jana, R K (2007) Dissolution Behaviour of Fe-Co Alloy in Leaching of Sea-Nodule. In: International Conference on Mineral Processing Technology (MPT – 2007), Feb. 22-24, 2007, Mumbai. Singh, T B and Bhattamishra, A K and Tiwari, S K and Singh, Raghuvir and Bhattacharjee, S (2007) Enhancement of Surface properties of Metal substrates by Electroless Nickel Coating. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Singh, T B and Singh, Raghuvir and Mandhyan, A K (2007) Corrosion protection of steel using waste oils. Journal of Metallurgy and Materials Science, 49 (1). pp. 51-58. Sinha, Arvind and Das, Goutam and Sharma, Binay Kumar and Roy, Raja Prabahan and Pramanick, A K and Nayar, S (2007) Poly(vinyl alcohol)–hydroxyapatite biomimetic scaffold for tissue regeneration. Materials Science and Engineering C, 27 (1). pp. 70-74. Sinha, N and Singh, Ratnakar (2007) Synthesis of quinoline derivatives and substituted homophthalic acids for use in flotation of low grade ores. Journal of Metallurgy and Materials Science, 49 (3). pp. 175-181. Sivaprasad, S and Ghosh, M and Das, Swapan K and Ghosh Chowdhury, S and Tarafder, S (2007) Evolution of Deformation-Induced Martensite during Fatigue Deformation of AISI 304LN Stainless Steel. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Sivaprasad, S and Tarafder, S (2007) Corrosion of stressed components. In: Training programme on industrial corrosion: Evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 68-91. Sridhar, G and Singh, S R (2007) Opinion on the Cause of Damage of Last Stage Blade of 37 MW Steam Turbine of Monnet Ispat and Energy Ltd., Raigarh, Chattisgarh. Consultancy (CNP). CSIR-NML, Jamshedpur. (Submitted) Sridhar, G and Singh, S R and Das, Swapan K and Gunjan, M K and Rupa, P K P (2007) Failure Analysis of Damaged parts of a Roller press at Jay Pee Bela Cement Plant, M.P. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted) Srikanth, S and Das, Swapan K and Sasikumar, C and Ravi Kumar, B (2007) Failure of evaporator tubes initiated by lamellar tearing during the commissioning of a waste heat recovery boiler. Engineering Failure Analysis, 14 (1). pp. 262-278. Srinivasan, A and De, P K and Srivastava, V C and Poddar, Palash and Sahoo, K L and Ghosh Chowdhury, S and Swaminathan, J (2007) Studies on Large Strain Rolling (LSR) of AZ31 Magnesium Alloy. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Srinivasan, A and Ghosh Chowdhury, S and Srivastava, V C and Swaminathan, J and Poddar, Palash and De, P K (2007) Microstructural and textural evolution during large strain hot rolling (LSR) of Mg–Al (AZ31) alloy. Materials Science and Technology, 23 (11). pp. 1313-1320. Srinivasan, A and Ningshen, S and Mudali, U Kamachi and Pillai, U T S and Pal, B C (2007) Influence of Si and Sb additions on the corrosion behavior of AZ91 magnesium alloy. Intermetallics, 15 (12). pp. 1511-1517. Srinivasan, A and Pillai, U T S and Pal, B C (2007) Effect of Pb addition on ageing behavior of AZ91 magnesium alloy. Materials Science and Engineering A, 452-453 . pp. 87-92. Srivastava, V C and Mandal, R K and Ojha, S N and Venkateswarlu, K (2007) Microstructural modifications induced during spray deposition of Al–Si–Fe alloys and their mechanical properties. Materials Science and Engineering A, 471 (1-2). pp. 38-49. Srivastava, V C and Sahoo, K L (2007) Processing, stabilization and applications of metallic foams. Art of science. Materials Science - Poland, 25 (3). pp. 735-753. Srivastava, V C and Singh, T and Kumar, S and Ghosh Chowdhury, S and Jindal, Vikas (2007) Microstructural Characteristics of Accumulative Roll Bonded Ni-Al Based Metal Intermetallic Laminate Composite. In: International Conference on Recent Advances in Composite Materials, 2007, New Delhi, India, February 20-23, 2007, New Delhi. Swaminathan, J and Chattoraj, I and Gunjan, M K and Konar, J and Updhyay, A K (2007) Failure Analysis of air Pre-Heater Tubes. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted) Swaminathan, J and Krishna, G and Gunjan, M K and Mahato, B and Ravi Kumar, B and Hansda, K L and Sharma, R K and Upadhyay, A K (2007) Failure Analysis of Water wall Tubes of Boiler No.7. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted) TTarafder, S and Sivaprasad, S and Ranganath, V R (2007) Comparative assessment of fatigue and fracture behaviour of cast and forged railway wheels. Fatigue and Fracture of Engineering Materials and Structures, 30 (9). pp. 863-876. Tarafder, S and Sivaprasad, S and Ray, K K (2007) Ductile fracture behaviour of primary heat transport piping material. Materials Science and Technology, 23 (11). pp. 1285-1293. Tiwari, S K and Mishra, T and Gunjan, M K and Bhattacharyya, A S and Singh, T B and Singh, Raghuvir (2007) Development and characterization of sol–gel silica–alumina composite coatings on AISI 316L for implant applications. Surface and Coatings Technology, 201 (16-17). pp. 7582-7588. UUllah, Wahadat (2007) Development of ultra- fine grained aluminium by severe plastic deformation. Masters thesis, National Metallurgical Laboratory. Upadhyay, A K and Gupta, K K and Sircar, J K and Deb, M K and Mundhara, G L (2007) Dominance of lithogenic effect for nickel, cobalt, chromium and mercury as found in freshly deposited sediments of the river Subernarekha, India. Environmental Geology, 51 (8). pp. 1447-1453. VVaish, A K and Gupta, R C and Mehrotra, S P (2007) Smelting reduction of iron ore - An optimum approach. Journal of Metallurgy and Materials Science, 49 (3). pp. 129-143. Vaish, A K and Nayak, B and Mehrotra, S P and Gupta, R C (2007) The Ni-Cr-Co bearing magnetite ore of Nagaland, India - its mineralogical characteristics. Journal of Metallurgy and Materials Science, 49 (4). pp. 215-220. Vaish, A K and Singh, S D (2007) Documentation and Development of Iron Making processes used by Tribals of India. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted) Vapnik, Yevgeny and Bushmin, Sergey and Chattopadhyay, A and Dobrovolsky, D D (2007) Fluid inclusion and mineralogical study of vein-type apatite ores in shear zones from the Singhbhum metallogenetic province, West Bengal, India. Ore Geology Reviews, 32 (1-2). pp. 412-430. Venkataraman, R and Das, Goutam and Singh, S R and Ghosh, R N and Venkataraman, B and Krishnamurty, R (2007) Study on influence of porosity, pore size, spatial and topological distribution of pores on microhardness of as plasma sprayed ceramic coatings. Materials Science and Engineering A, 445-446 . pp. 269-274. Venkateswarlu, K and Ghosh Chowdhury, S and Pathak, L C and Ray, Ajoy K (2007) Microstructural examination of service exposed coal mill liner material. Materials Characterization, 58 (10). pp. 1029-1032. Verma, Vijay and Sahu, S K and Bagchi, D and Kumar, Vinay and Pandey, B D (2007) Solvent extraction of hexavalent chromium from electroplating waste solution with TBP. In: International Conference on Non-Ferrous Metals 2007, July 2007, Raipur. Vidyadhar, A (2007) Role of Mixed Collector Systems in Selective Separation of Albite from Greek Stefania Feldspar Ore. In: International Seminar on Mineral Processing Technology (MPT-2007), February 22-24, 2007, Indian Institute of Technology, Bombay. Vidyadhar, A and Rao, K Hanumantha (2007) Adsorption mechanism of mixed cationic/anionic collectors in feldspar-quartz flotation system. Journal of Colloid and Interface Science, 306 (2). pp. 195-204. Vidyadhar, A and Singh, Ratnakar (2007) Froth Flotation and its Application to Concentration of Low Grade Iron Ores. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur. WWanderka, N and Radiguet, B and Sahoo, K L and Banhart, J (2007) Crystallization Behavior of Al87Ni5La7Zr1 Metallic Glass. Materials Science Forum, 539-543 . pp. 1917-1920. Wollgarten, M and Sahoo, K L and Haug, J and Banhart, J (2007) Influence of La on the crystallisation behaviour of amorphous Al94−xNi6Lax (x=4 –7) alloys. Materials Science and Engineering A, 449-451 . pp. 1049-1051. |