Items where Year is 2013

Sridhar, Seetharaman and Sampson, Erica (2013) Recycling High-Residual Scrap in EAF – Fundamental Research Aimed at pushing the limits. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking , December 16-18, 2013, CSIR-NML Jamshedpur.

A

Abhilash, (2013) Interview in Down to Earth Magazine. Down to Earth Magazine, February . p. 41.

Abhilash, and Mehta, K D and Pandey, B D (2013) Bacterial leaching kinetics for copper dissolution from a lowgrade Indian chalcopyrite ore. Rem: Revista Escola de Minas, 66(2) (IF-0.785). pp. 245-250.

Abhilash, and Pandey, B D (2013) Bioreactor leaching of uranium from a low grade Indian silicate ore. Biochemical Engineering Journal, 71 (IF-2.645). pp. 111-117.

Abhilash, and Pandey, B D (2013) Microbial processing of apatite rich low grade Indian uranium ore in bioreactor. Bioresource Technology, 128 (IF-4.980). pp. 619-623.

Abhilash, and Pandey, B D (2013) Microbially Assisted Leaching of Uranium—A Review. Mineral Processing and Extractive Metallurgy Review, 34 . pp. 81-113.

Abhilash, and Pandey, B D and Singh, A K (2013) Comparative Performance of Uranium Bioleaching from Low Grade Indian Apatite Rock in Column and Bioreactor. Energy Procedia, 39 . pp. 20-32.

Abhishek, and Bhattacharya, Maitreyee (2013) Alkali Roasting and Leaching : A Process for the Tungsten Sludge. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Agarwal, Sanjay and Ghorai, S and Pal, J and Ghosh, Dinabandhu (2013) Chromite ore fines sintering for ferrochrome production. In: 26th National convention of metallurgical and material engineers & National seminar LGO 2013 of Institution of Engineers (India), 22-23rd January, Jamshedpur.

Aggarwal, Nishant (2013) Effect of Phosphorus on Mild Steel - From A Structural Engineer’s View. In: Proceeding Of International Seminar on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Alex, T C and Kalinkin, A M and Nath, S K and Gurevich , B I and Kalinkina, E V and Tyukavkina, W and Kumar, Sanjay (2013) Utilization of zinc slag through geopolymerization: Influence of milling atmosphere. International Journal of Mineral Processing, 123 (IF-1.378). pp. 102-107.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2013) High Energy Milling of Boehmite: Changes in Particulate Characteristics. In: Proceedings of the XIII International Seminar on Mineral Processing Technology (MPT-2013), 10-12 December, 2013, IMMT, Bhubaneswar.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2013) Leaching behaviour of high surface area synthetic boehmite in NaOH solution. Hydrometallurgy, 137 (IF-2.169). pp. 23-32.

Ali, F and Scudino, S and Gorantla, S M and Srivastava, V C and Shahid, H R and Uhlenwinkel, V and Stoica, M and Vaughan, G and Mukhopadhyay, N K and Eckert, J (2013) Mechanically driven phase transformation in single phase Al 62.5 Cu 25 Fe 12.5 quasi-crystals: Effect of milling intensity. Acta Materialia, 61 (IF-3.94). pp. 3819-3830.

Ali, Tayyab and Venkataraman, A (2013) Preparation and characterization of g-Fe2O3 dispersed polyvinyl alcohol (PVA) Nanocomposite film. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 293-297.

Anand, Amit and Jha, Manis K and Kumar, Vinay and Sahu, Rina (2013) Recycling of Precious Metal Gold from Waste Electrical and Electronic Equipments (WEEE): A review. In: Proceeding of the XIII International Seminar on Mineral Processing Technology, 10/12/2013 To 12/12/2013, CSIR-IMMT, Bhubaneswar.

Ananda Kumar, S and Sundara Raman, S Ganesh and Sankara Narayanan, T S N and Gnanamoorthy, R (2013) Influence of counterbody material on fretting wear behaviour of surface mechanical attrition treated Ti-6Al-4V. Tribology International, 57 (IF-1.536). pp. 107-114.

Aruna, V A J and Ravi, B P and Haran, N P and Ram, Mohan and Gundewar, C S (2013) Recovery of phosphate from lean resources. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 209-217.

Ashok, K and Sankar, P and Maruthupandian, K (2013) Process Evaluation of AOD Stainless Steel Making In Salem Steel Plant, SAIL. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

B

Bagchi, R K and Bandhu, Vishva (2013) Technology in Secondary Steel Sector. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Bagui, S and Ray, Ashok K and Sahu, J K and Parida, N and Swaminathan, J and Tamilselvi, M and Mannan, S L (2013) Influence of Saline Environment on creep rupture life of Nimonic-263 for marine turbine application. Material Science and Engineering A-Stuctural Materials properties Microstructure and processing, 566 (IF-2.003). pp. 54-60.

Balaz, Peter and Achimovičová, M and Baláž, Matej and Billik, Peter and Cherkezova-Zheleva, Zara and Criado, José Manuel and Delogu, Francesco and Dutková, Erika and Gaffet, Eric and José Gotor, Francisco and Kumar, Rakesh and Mitov, Ivan and Rojac, Tadej and Senna, Mamoru and Streletskii, Andrey and Wieczorek-Ciurowa, Krystyna (2013) Hallmarks of mechanochemistry: from nanoparticles to technology. Chemical Society Reviews, First published on the web 04 Apr 2013 (IF-28.76). pp. 1-67.

Ballal, N B and Kadri, Irfan and Kothari, Anil Kumar and Viswanathan, N N (2013) Modelling of Processes in the Trickling Zone of the Iron Blast Furnace. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Park, Song and Lee, Min Ho (2013) Effect of surface mechanical attrition treatment (SMAT) on pack boronizing of AISI 304 stainless steel. Surface and Coatings Technology, 232 (IF-1.941). pp. 60-67.

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Park, Song and Lee, Min Ho (2013) Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel. Corrosion Science, 74 (IF-3.615). pp. 332-344.

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Park, Song and Lee, Min Ho (2013) Pack boronizing of AISI H11 tool steel: Role of surface mechanical attrition treatment. Vacuum, 97 (IF-1.530). pp. 36-43.

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Park, Song and Lee, Min Ho (2013) Plasma nitriding of AISI 304 stainless steel: Role of surface mechanical attrition treatment. Materials Characterization, 85 (IF-1.880). pp. 38-47.

Bansal, Rajesh and Singh, J K and Singh, D D N (2013) Deleterious effects of nicotine containing dentifrices on human saliva and teeth: A novel study. Indian Journal of Dentistry, 4(1) . pp. 22-28.

Bar, H N and Sivaprasad, S and Narasaiah, N and Paul, S K and Sen, B N and Chandra, Sanjay (2013) Low Cycle and Ratchetting Fatigue Behavior of High UTS/YS Ratio Reinforcing Steel Bars. Journal of Materials Engineering and Performance, 22(6) (IF- 0.92). pp. 1701-1707.

Baral, Jayashree and Swaminathan, J and Ghosh, R N (2013) Creep Behaviour of 9CrMoNbV (P91) Steel having a Small Amount of Boron. Procedia Engineering, 55 . pp. 88-92.

Basu, T S and Ray, Mallar and Bandopadhyay, N R and Pramanick, A K and Hossain, S M (2013) Performance Enhancement of Crystalline Silicon Solar Cells by Coating with Luminescent Silicon Nanostructures. Journal of Electronic materials, 42(3) (IF-1.9). pp. 403-409.

Bera, Supriya and Ghosh Chowdhury, S and Estrin , Yuri and Manna, I (2013) Mechanical properties of Al7075 alloy with nano-ceramic oxide dispersion synthesized by mechanical milling and consolidated by equal channel angular pressing. Journal of Alloys and Compounds, 548 (IF-2.390). pp. 257-265.

Bhattacharjee, S and Chakravarty, S and Mishra, T and Upadhyay, A K and Singh, M (2013) A Comprehensive survey on the water quality of Sahebgunj, Rajmahal, Udhawa and Barhait blocks of Sahebgunj district and Pakur and Pakuria blocks in adjacent Pakur district with focus on arsenic. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Bhattacharya, M and Sahu, Ranjan K and Ghosh, M and Das, S K and Mahato, B K and Goel, R P (2013) Chemical Synthesis of magnetic Co and CoNi nanoparticles and their characterization. Exploratory (OLP). CSIR -NML, Jamshedpur. (Submitted)

Biswas, Nabonita and Ghosh, T K and Mukherjee, Rajesh and Rao, S Mohan (2013) Exploiting iron values from iron ore source rock: Opportunities. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 305-311.

Biswas, Piyalee and Das, S and Sarkar, Paromita and Choudhary, Kamal and Baidya, Prasanta and Giri, P and Ghosal, A and Bandyopadhyay, A K (2013) Rectificaton of Energy transport in nonlinear metamaterials via ratchets. Journal of Physics D-Applied Physics, 46(20) (IF-2.528).

Bose, Debabrata (2013) Development of a Non-Invasive Technique Based on Infra-red Thermography to Detect and Estimate Iron in Galvannealed Coatings. Masters thesis, Bengal Engineering College and University, Shibpur.

C

Chakraborty, J and Ghosh, M and Ranjan, R and Das, Goutam and Das, D and Chandra, Sanjay (2013) X-ray diffraction and Mossbauer spectroscopy studies of cementite dissolution in cold-drawn pearlitic steel. Philosophical Magazine, 93(36) . pp. 4598-4616.

Chakravarty, S and Mohanty, Ashok and Tarafder, Mita and Das Biswas, Rupa and Ghosh, Barun and Aggarwal, S G and Gupta, P K (2013) Proficiency Testfor Proximate Analysis of Coal: Determination of Moisture, Ash, Volatile Matter and Total Sulfur. In: Proceedings of 8th International Conference on Advances in Metrology (AdMet-2013), Feb, 2013, New Delhi.

Chattoraj, I (2013) Stress assisted corrosion. [Presentation Slide] (Submitted)

Cherian, Antony (2013) Composition analysis of minerals using non-invasive infrared thermography. Masters thesis, NIT Trichy.

Chokshi, Yakshil and Dutta, S K (2013) Production of Iron Ore-Coal Composite Briquette/Pellet by Using Fly-Ash and Other Binders. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Choubey, Pankaj K and Jha, Manis K and Sahu, S K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun and Pathak, Devendra Deo (2013) Solvent extraction (SX) and separation of Sn/ Pb from the leach liquor of waste solder material and effluents. In: Proceedings of the XIII lnternolionol Seminar on Mineral Processing Technologt (MPT-20I3), 10/12/2013 to 12/12/2013, CSIR-IMMT, Bhubaneswar.

Choudhary, Shyam K and Bhadu, Manish Kumar and Guin, Akshya Kumar and Pramanick, A K and Ghosh, Nabarun and Rout, Tapan Kumar and Das, Sumitesh (2013) Boiling Study of Nanofluid on Graphene Coated Substrate. Journal of Nanofluids, 2 . pp. 1-4.

Cicalé, C and Abbruzzese, G and Fortunati , S (2013) Historical Development, Present Status and Future of Electrical Steel. In: Proceedin of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

D

Das, Arpan (2013) Martensite–Void Interaction. Scripta Materialia, 68(7) (IF-2.821). pp. 514-517.

Das, Arpan and Poddar, Palash (2013) Structure–wear-property correlation. Materials & Design, 47 (IF-2.913). pp. 557-565.

Das, Arpan and Sivaprasad, S and Tarafder, Mita and Das, S K and Tarafder, S (2013) Estimation of Damage in high strength steels. Applied Soft Computing, 13(2) (IF-2.140). pp. 1033-1041.

Das, C R and Albert, S K and Swaminathan, J and Bhaduri, A K and Murty, B S (2013) Effect of Boron on Creep Behaviour of Inter-critically Annealed Modified 9Cr-1Mo Steel. Procedia Engineering, 55 . pp. 402-407.

Das, H K and Basak, Sushovan and Das, Goutam and Pal, T K (2013) Influence of Energy Induced from Processing Parameters on the Mechanical Properties of friction stir welded lap joint of Aluminium to Coated Steel Sheet. The International Journal of Advanced Manufacturing Technology, 64(9-12) (IF-1.205). pp. 1653-1661.

Das, Suchandan K (2013) Neural network modelling of flow stress and mechanical properties for hot strip rolling of TRIP steel using efficient learning algorithm. Ironmaking and Steelmaking, 40(4) (IF- 0.559). pp. 298-304.

Das, Suchandan K and Mondal, G K and Sau, D C and Bandopadhay, D (2013) A Phenomenological Mathematical Model to Predict the Bosh Silicon Transport Under the Influence of Liquid Hold-up in the Dripping Zone of an Operating Blast Furnace. In: Proceeding of the International Conference on Science and Technology of ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Dey, Banashree and Sarkar, Ashis (2013) Morphological analysis of ferrospheres isolated from fly ash collected from fields of an ESP. In: International Conference on Science and Technology of Ironmaking & Steelmaking (STIS 2013) December 16-18, 2013, (STIS 2013) December 16-18, 2013, India.

Dey, Shobhana and Pani, Santosh and Bhattacharyya, K K (2013) Effective processing of iron ore slime using column flotation. In: Flotation-13, 18-22 November 2013, Cape Town, South Africa.

Dey, Shobhana and Paul, Gyan Manjari and Pani, Santosh (2013) Effective flotation of weathered coal using frother blend. In: National Seminar On Coal Preparation Technology,CPT-2013 , 22-23 Feburary 2013, CIMFR, Dhanbad.

Dey, Shobhana and Paul, Gyan Manjari and Pani, Santosh (2013) Flotation behaviour of weathered coal in mechanical and column flotation cell. Powder Technology, 246 (IF-2.265). pp. 689-694.

Dey, Sujit Kumar and Dey, Shobhana and Das, Avimanyu (2013) Comminution features in an impact hammer mill. Powder Technology, 235 (IF-2.265). pp. 914-920.

Dhal, B and Abhilash, and Pandey, B D (2013) Process optimization for bio-beneficiation of a chromite concentrate by a Cr(VI) reducing native microbe (Bacillus sp.). International Journal of Mineral Processing, 123 (IF-1.378). pp. 129-136.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2013) Characterizing toxic Cr(VI) contamination in chromite mine overburden dump and its bacterial remediation. Journal of Hazardous Materials, 260 (IF-4.173). pp. 141-149.

Dhal, B and Pandey, B D (2013) Microbial Biosorption of metal contaminants: An Environment friendly process. In: Advances in Biotechnology. Studium Press LLC, NEW DELHI, pp. 125-152. ISBN 1-626990-13-1

Dhal, B and Thatoi, Hruayanath and Das, N N and Pandey, B D (2013) Chemical and microbial remediation of hexavalent chromium from contaminated soil and mining/metallurgical solid waste: A review. Journal of Hazardous Materials, 250-251 (IF-4.173). pp. 272-291.

Dhara, S and Kumar, R R and Mallick, A and Chowdhury, G M and Roy, B C and Das, A and Das, T P and Singh, U K (2013) Water Surface Tension and it’s Effect on Sintering: A Practical Experience in Bokaro Steel Plant. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Director, NML (2013) 26th National Convention of Metallurgical and Materials Engineers & National Seminar on Exploitation of Lean Grade Ore, Ore Fines and Urban Ores : Challenges, Problems & Solutions LGO-2013. In: 26th National Convention of Metallurgical and Materials Engineers & National Seminar on Exploitation of Lean Grade Ore, Ore Fines and Urban Ores. CSIR-NML, 2013, pp. 1-312.

Director, NML (2013) Annual Report 2012-2013. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2013) Director's Desk - 63rd RC Meeting of CSIR-NML (English Version). CSIR-NML, Jamshedpur.

Director, NML (2013) Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar. In: Exploitation of Lean Grade Ore, Ore Fines and. www.nmlindia.org, pp. 1-287.

Dunstone, Dick (2013) Coal Processing – Impact on Coke Quality. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Dwivedi, Deepak and Singh, C B (2013) Reduction Kinetics of Iron Ore Pellets with Coal and Coal Dust. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, Jamshedpur.

G

Ghali, Saeed Nabil and Eissa, Mamdouh and Faramawy, Hoda El and Ahmed, Azza and Mattar, Taha and Mishreky, Michael (2013) Production and Application of Advanced High Nitrogen Steel. In: Proceeding of the international Conference on Science and Technology of Ironmaking and Steelmaking , December 16-18, 2013, CSIR-NML Jamshedpur.

Ghosh, Anirban and Kumari, Sujata and Abhilash, and Pandey, B D (2013) Microbial upgradation of Meghalaya coal by Rhodococcus rhodochrous and Pseudomonas aeruginosa. In: Proceedings of XIII international seminar on Mineral Processing Technology, 10-12, December 2013, Bhubaneswar.

Ghosh, Arpita and Das, T K and Cherian, Antony and Reddy, S and Mukherjee, R and Palit Sagar, S (2013) An Infrared Imaging System for Compositional Analysis of Iron Ore. In: APCNDT 2013, 18 - 22 November 2013, Renassiance Convention Centre, Mumbai. (Submitted)

Ghosh, Arpita and Das, T K and Nayak, B and Palit Sagar, S (2013) A non-invasive technique for sorting of alumina-rich iron ores. Minerals Engineering, 45(55–58) (IF-1.207). pp. 55-58.

Ghosh, Arpita and Sharma, A K and Nayak, B and Ghosh, T K and Palit Sagar, S (2013) Infrared Thermography for Iron Ore Grading. In: Physical Separation'13, 20-21st June, 2013, Falmouth, Cornwall, UK.

Ghosh, Arpita and Sivaprasad, S and Bhattacharjee, A and Kar, S (2013) Microstructure-fracture toughness correlation in an aircraft structural component alloy Ti-5Al-5V-5Mo-3Cr. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 568 (IF-2.108). pp. 61-67.

Ghosh, M and Husain, M M and Kumar, K and Kailas, S V (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. Journal of Materials Engineering and Performance , 22(12) (IF-0.915). pp. 3890-3901.

Ghosh, M and Kumar, Rajneesh and Husain, M M (2013) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transaction A (IF-1.738).

Ghosh, Rachit and Kumar, Anil and Kumar, Sanjay (2013) Flyash Geopolymer Concrete as Future Concrete. International Journal of Advanced Scientific and Technical Research, 6(3) . pp. 260-271.

Ghosh, Sabita and Prakash, R V (2013) Study of Damage and Fracture Toughness due to Influence fo Creep and Fatigue of Commercially Pure Copper by Monotonic and Cyclic Indentation. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science , 44A(1) (IF-1.738). pp. 224-234.

Gomes, Leandra Saviola (2013) Synthesis of Biomimetic Ferrofluid with Apoferritin as a MRI Contrast Agent. Masters thesis, VIT University, Vellore-623014.

Goswami, B and Raj, A and Singh, M P and Ray, Ashok K (2013) Mechanical properties and ferrite formation in microalloyed steel. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 1-19.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of copper and iron on the wear properties of spray formed Al–28Si alloy. Materials & Design, 51 (IF-2.913). pp. 383-390.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of Cu and Mg on the wear properties of spray formed Al -22Si alloy. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of secondary processing on the microstructure and wear behavior of spray formed Al–30Mg 2 Si–2Cu alloy. Materials & Design, 47 (IF-2.913). pp. 489-496.

Gupta, G S (2013) Fluid Flow Behavior In The Lower Part Of A Blast Furnace. In: Proceeding of the International conference on science and technology of iron making and steel making , December 16-18, 2013, CSIR-NML Jamshedpur.

Gupta, Pallawi and Nayar, S (2013) A Spectroscopic Study of Ferrofluid and Colloidal Graphene. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Gupta, R C (2013) The utilisation of iron ore fines : Technical options and challenges. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 235-256.

Gupta, Siddhi and Greeshma, T and Basu, Bikramjit and Goswami, Sudipta and Sinha, Arvind (2013) Stiffness-and wettability-dependent myoblast cell compa-tibility of transparent poly(vinyl alcohol) hydrogels. Journal of Biomedical Materials Research Part B-Applied, 101B (IF-2.834). pp. 346-354.

H

Haase, C and Ghosh Chowdhury, S and La, Barrales-Mora and Molodov, D A and Gottstein, G (2013) On the Relation of Microstructure and Texture Evolution in an Austenitic Fe-28Mn-0.28C TWIP Steel during Cold Rolling. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 44A (IF-1.738). pp. 911-922.

Hansda, Soma and Ghosh Chowdhury, S (2013) Recrystallization of TWIP Steels and Study of X-Ray Diffraction Pattern. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Hazra, S K and Hazra, Snehanu (2013) Coke for iron making. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Hazra, Sujan and Saxen, Henrik and Sengupta, Bhaskar (2013) Application of a One-Dimensional Steady-State Model for Process Supervision in Blast Furnace. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Hoff, Dan and Sheikh, Lubna and Bhattacharya, S and Nayar, S and Webster, T J (2013) Comparison study of ferrofluid and powder iron oxide nanoparticle permeability across the blood-brain barrier. International Journal of Nanomedicine, 8(1) (IF-3.463). pp. 703-710.

Hore, S and Das, Suchandan K (2013) Mathematical Modelling of Microstructure Evolution During Hot Strip Rolling of Trip Steel Using A Multi-Scale Framework. In: Proceeding of the international Conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Hore, S and Das, Suchandan K (2013) Monte Carlo simulation of microstructure evolution during thermo-mechanical rolling of steel using grid computing technology. In: National conference on Parallel Computing Technologies (PARCOMPTECH-2013), 21-23 FEB 2013, Bangalore.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2013) A multiscale coupled Monte Carlo model to characterize microstructure evolution during hot rolling of Mo-TRIP steel. Acta Materialia, 61 (IF-3.941). pp. 7251-7259.

Hunani, S R and Lodhari, D R and Dutta, S K and Das, A K (2013) Enrichment of Low Grade Iron Ore by Jigging and Shaking Table. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Husain, M M and Ghosh, M (2013) Inhibition of intermetallic formation during diffusion bonding of high-carbon steel. International Journal of Advanced Manufacturing Technology, 66 (9-12) . pp. 1871-1877.

J

Jain, Udit (2013) Corex & Finex-New Developments in Utilization of Low Grade Raw Materials. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Jamesh, M and Sankara Narayanan, T S N and Chu, P K and Park, Song and Lee, Min Ho (2013) Effect of Surface Mechanical Attrition Treatment of Titanium Using Alumina Balls: Surface Roughness, Contact Angle and Apatite Forming Ability. Frontiers of Materials Science, 7(3) . pp. 285-294.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N and Chu, P K (2013) Effect of thermal oxidation on the corrosion resistance of Ti6Al4V alloy in hydrochloric and nitric acid medium. Materials and Corrosion / Werkstoffe und Korrosion, 64(10) (IF-1.173). pp. 902-907.

Jana, Arpita and Devi, P S and Mitra, A and Bandyopadhyay, N R (2013) Synthesis of blue emitting ZnO nanorods exhibiting room temperature ferromagnetism. Materials Chemistry and Physics, 139(2-3) (IF-2.072). pp. 431-436.

Jha, Amrita Kumari and Jha, Manis K and Kumar, Vinay and Sahu, Rina (2013) Recovery of neodymium as value added product NdF3 from rare earth magnet. In: Proceedings of the XIII lnternational Seminar on Mineral Processing Technology (MPT-20 I 3), 10/12/2013 to 12/12/2014, CSIR-IMMT, Bhubaneswar.

Jha, Amrita Kumari and Jha, Manis K and Kumari, Anjan and Sahu, S K and Kumar, Vinay and Pandey, B D (2013) Selective separation and recovery of cobalt from leach liquor of discarded Li-ion batteries using thiophosphinic extractant. Separation and Purification Technology, 104 (IF-2.921). pp. 160-166.

1660DEL2013 (2013) A process for the recovery of neodymium as a value added product from waste hard disk of personal computers. 0086NF2012.

Jha, Manis K and Kumari , Anjan and Jha, Amrita Kumari and Kumar, Vinay and Hait, Jhumki and Pandey, B D (2013) Recovery of lithium and cobalt from waste lithium ion batteries of mobile phone. Waste Management, 33(9) (IF-2.485). pp. 1890-1897.

Jha, Manis K and Lee, Jae-chun and Kim, Min-seuk and Jeong, Jinki and Kim, Byung-Su and Kumar, Vinay (2013) Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review. Hydrometallurgy, 133 (IF-2.027). pp. 23-32.

Joni, B and Al-Samman, T and Ghosh Chowdhury, S and Csiszar, G and Ungar, T (2013) Dislocation densities and prevailing slip-sytem types determined by X-ray line profile analysis in a textured AZ31 magnesium alloy deformed at different temperatures. Journal Of Applied Crystallography, 46(1) (IF-3.343). pp. 55-62.

Jun, Minji and Kumar, Vinay and Jha, Manis K (2013) Recovery of Indium from scrap LCD monitors. Training Report (TR). CSIR-NML. (Submitted)

Jun, Sang Hee and Jha, Manis K and Hait, Jhumki and Sahu, S K (2013) Rare earth characterizations & processing for the metal La recovery. Training Report (TR). CSIR-NML. (Unpublished)

K

Kalinkin, A M and Alex, T C and Nath, S K and Gurevich, B I and Kalinkina, E V and Tyukavkina, V V (2013) Geopolymers Based on Mechanically Activated Non-Ferrous Slags. Chemistry for Sustainable Development, 6 (IF-). pp. 647-655.

Karehanumappa, K (2013) Contribution of green pellet properties in induration of iron oxide pellet production. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 77-81.

Karmakar, A and Ghosh, M and Chakrabarti, D (2013) Cold-rolling and inter-critical annealing of low-carbon steel: Effect of initial microstructure and heating-rate. Materials Science & Engineering A, 564 (IF-2.108). pp. 389-399.

Khan, Asghar and Chakraborty, N R and Yadav, H L (2013) Solar tracking with no movable parts using multiplexed holographic lenses for photovoltaic application. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 183-186.

Khattoi, S C and Roy, G G (2013) Sponge Iron Production From Ore-Coal Composite Pellets in Tunnel Kiln. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Khutia, N and Dey, P P and Paul, Surajit Kumar and Tarafder, S (2013) Development of non Masing characteristic model for LCF and ratcheting fatigue simulation of SA333 C–Mn steel. Mechanics of Materials, Volume 65, October 2013, Pages 88–102 (IF-1.936). pp. 88-102.

Kim, Min-seuk and Lee, Jae-chun and Park, S W and Jeong, Jinki and Kumar, Vinay (2013) Dissolution behaviour of platinum by electro-generated chlorine in hydrochloric acid solution. Journal of Chemical Technology and Biotechnology, 88(7) (IF-2.504). pp. 1212-1219.

Kopparthi, Prasad and Simab, Rizwan and Banerjee, P K (2013) Performance Evaluation of Synthetic Collector on Coal Flotation. In: proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking , December 16-18, 2013, CSIR-NML Jamshedpur.

Krishna, S J G and Kumar, P S and Ravi, B P and Naganoor, P C and Yadav, S and Gundewar, C S (2013) Processing Studies on a Sub Grade Iron Ore Sample From S.J.H. Mine, Sandur, Karnataka. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, Dec 16-18,2013, CSIR-NML Jamshedpur.

Kromhout, Jan and Carless, Stephen and Dekker, Edward (2013) Revealing The Unknown: Monitoring The in-Mould Behaviour During Continuous Casting of Steel. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Kruthik, N Lakshmi and Karthika, S and Bhaskar Raju, G and Prabhakar, S (2013) Efficacy of electrocoagulation and electrooxidation for the purification of wastewater generated from gelatin production plant. Journal of Environmental Chemical Engineering, 1(3) (IF-). pp. 183-188.

Kumar, Anuj and Kumar, Sanjay (2013) Developments of Paving blocks from synergistic use of red mud and fly ash using geopolymerization. Construction and Building Materials, 38 . pp. 865-871.

Kumar, Anuvrat and Garai, Subhadra (2013) Insitu Bio Mineralization of Polymer-Hydroxyapatite Nano Composites as Bone Graft. Training Report (TR). CSIR-NML, Jamshedpur. (Unpublished)

Kumar, Avinash and Mrunmaya, K P and Maharana, Sudeep and Chowdhury, Subrata Kumar and Sah, Rameshwar and Kaza, Marutiram (2013) A Real Time Model For Prediction Of Blast Furnace Hot Temperature Through Neural Network. In: Proceeding of the International conference on science and technology of iron making and steel making , December 16-18, 2013, CSIR-NML Jamshedpur.

Kumar, D Satish and Marutiram, K and Sah, Rameshwar (2013) Development of Integrated Process Control System at JSW Steel Ltd. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Kumar, Gaurav and Lichchhavi, and Pramanick, A K (2013) Characterization of Al-Si-Zr Alloy. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar, Gaurav and Lichchhavi, and Pramanick, A K (2013) Characterization of Al-Si-Zr Alloy. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar, Manoj and Sau, D C and Nishant, P and Bhattacharya, Maitreyee (2013) Reduction of ammonium paratungstate generated during hydrometallurgical processing of tungsten-copper borings. Harnessing of Nonferrous Minerals and Wastes, 828 . pp. 123-134.

Kumar, Manoj and Sau, D C and Nishant, P and Bhattacharya, Maitreyee (2013) Reduction of Ammonium Paratungstate Generated During Hydrometallurgical Processing of Copper-Tungsten(W-Cu) Borings. In: 17 th International Conference on Non-ferrous Minerals and Metals 2013, 5-6 July, 2013, Ranchi.

Kumar, Mukesh and Mishra, Suman K and Mitra, R (2013) Effect of Ar:N-2 ratio on structure and properties of Ni-TiN nanocomposite thin films processed by reactive RF/DC magnetron sputtering. Surface & Coatings Technology, 228 (IF-1.867). pp. 100-114.

Kumar, Sanjay and Garcia-Trinanes, P and Teixeira-Pinto, A and Bao, M (2013) Development of alkali activated cement from mechanically activated silico-manganese (SiMn) slag. Cement & Concrete Composites, 40 . pp. 7-13.

Kumar, Vinod and Lee, Jae-chun and Jeong, Jinki and Jha, Manis K and Kim, Byung-Su and Singh, Ratnakar (2013) Novel physical separation process for eco-friendly recycling of rare and valuable metals from end-of-life DVD-PCBs. Separation and Purification Technology, 111 (IF-2.921). pp. 145-154.

Kumar D, Satish and Das, T K and Justin Joseyphus, R and Ghosh, Arpita and Palit Sagar, S and Mandal, S K (2013) Development of Online Defect Detection System for High End Wires. In: APCNDT 2013, , 18 - 22 November 2013, Renassiance Convention Centre, Mumbai..

Kumari, Anjan and Kumar, Vinod and Jha, Manis K and Soni, B K (2013) Processing of poly-cracked ash of printed circuit boards for recovery of valuable and rare metals. In: Proceedings of the XlIl lnternationol Seminar on Mineral Processing Technology (MPT-20I3), 10/12/2013 to 12/12/2013, CSIR-IMMT, Bhubaneswar.

Kumari, Anjan and Singh, Rajendra Prasad and Jha, Manis K and Kumar, Vinay (2013) Extraction of copper from small electronic devices populated on discarded PCBs. Journal of Indian Chemical Society , 90 . pp. 2121-2126.

Kumari, Archana and Jha, Manis K and Hait, Jhumki and Sahu, S K and Kumar, Vinay (2013) Processing of Korean monazite concentrate for the recovery of rare earth metals (REMs). Journal of Indian Chemical Society, 90 . pp. 2105-2110.

Kumari, Smita and Singh, Saurabh Kumar and Kumar, Brajesh (2013) Rapid microwave digestion procedures for the elemental analysis of alloy and slag samples of smelted ocean bed polymetallic nodules. Journal of Chemistry, ISSN 2090-9063 - Open Source Journal (IF-0.484). pp. 1-6.

Kundu, Subhashis and Nag, Samik and Kothari, Ajit and Ramna, R V and Rai, Shailendra and Roy, S K (2013) High Productivity and High Pci Operation at ‘H’ Blast Furnace, Tata Steel – The Operating Experiences with Indian Raw Materials. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, Dec 16-18,2013, CSIR-NML JSR.

L

Lahiri, A K (2013) Failure of drain valve reducer in de-sulfurisation unit. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 257-270.

Lakshmi Kruthika, N and Bhaskar Raju, G and Prabhakar, S (2013) Degradation of Tannic Acid Using Tio2 Nanotubes as Electrocatalyst. International Journal of Nanoscience (ijn) . pp. 481023-481031.

Lakshmipathiraj, P and Umamaheswari, S and Bhaskar Raju, G and Prabhakar, S and Caroling, G and Kota, S and Kojima, T (2013) Studies on adsorption of Cr(VI) onto Strychnos potatorum seed from aqueous solution. Environmental Progress and Sustainable Energy, 32(1) . pp. 35-41.

Lal, S M and Ram, Mohan and Gundewar, C S (2013) Characterization and beneficiation of BHQ from Karnataka. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 323-327.

Lodhari, D R and Dutta, S K and Shah, R V (2013) Effect Of Aluminium, Chromium, Niobium And Titanium On On steel. In: Proceding of the International Confercnce on Science and technology of ironmaking and steel making, December 16-18, 2013, CSIR-NML Jamshedpur.

M

Madge, S V and Louzguine, D V and Inoue, A and Greer , A L (2013) Large Compressive Plasticity in a La-Based Glass-Crystal Composite. Metals, 3(1) (IF-). pp. 41-48.

Mahato, M M and Agrawal, M K and Sinha, S N (2013) Production of low sulphur spheroidal graphite pig iron in mini blast furnace by optimising slag. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 201-208.

Malathi, M and Kumar, Anil and Chacko, Z.E and Godiwalla, K.M and Ajmani, S K and Ranganathan, S (2013) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85 (IF-1.15). pp. 927-934.

Mandal, D and Viswanathan, S (2013) Effect of heat treatment on microstructure and interface of SiC particle reinforced 2124 Al matrix composite. Materials Characterization, 85 (IF-1.880). pp. 73-81.

Mandal, D and Viswanathan, S (2013) Effect of re-melting on particle distribution and interface formation in SiC reinforced 2124Al matrix composite. Materials Characterization, 86 . pp. 21-27.

Mandal, G K and Stanford, Nicole and Hodgson, Peter and Beynon, John H (2013) Static recrystallisation study of as-cast austenitic stainless steel. Materials Science and Engineering A, 576 (IF-2.108). pp. 118-125.

Mandal, S and Chakraborty, A and Ghosh, S K and Chatterjee, S (2013) Thermomechanically Controlled Processed Low Carbon Ultra Strength Steel: Microstructure and Mechanical Properties. In: Proceedings of the International Conference on Science and technology of Ironmaking and steel making, March 8-10, 2006, NML, Chennai.

Maranga, S M and Bett, Alvin Kiprono and Ndeto, Kyalo and Bett, Gilbert (2013) Kenyan Iron Ore: Mining and prospects of Processing. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Maruoka, Nobuhiro and Song, Duk-Yong and Shibata, Hiroyuki and Kitamura, Shin-ya and Gupta, G S (2013) Emulsification of Metal in Molten Salt by Gas Bubblin. In: Proceeding of The International Conference on Science and Technology of Ironmaking and Steelmaking, Dec 16-18,2013, CSIR-NML JSR.

Mazumdar, Dipak (2013) Ladle Metallurgy Steelmaking: The Role of Physical and Mathematical Modeling. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Meena, Dilip and Raj, Manish and Ranghuwansh, Mansingh and Garg, Vivek and Lakshminarasimham, B (2013) Effect of Iron Ore Lumps and Iron Ore Pellets on Production of Direct Reduced Iron. In: Proceeding of the international coconference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Meshram, Pratima and Sinha, Manish K and Sahu, S K and Khan, Pritam and Pandey, B D and Mankhand, T R (2013) Solvothermal synthesis of high value copper powder from copper bleed solution of an Indian copper smelter. Powder Technology, 233 (IF-2.265). pp. 335-340.

Minj, R K and Singh, S D and Ghorai, S and Paswan, Dayanand and Bandyopadhyay, D (2013) Development of a suitable process for effective and efficient de-phosphorisation of liquid metal in induction furnace. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Mironov, V G and Kenzhaliev, B K and Shilov, G T and Mahato, M M and Kalinin, V Yu and Suleimenov, E N (2013) The Conditions For Producing of New Iron-Based Filler Alloy For The Reconstruction Of Varied Machines' And Equipment' Parts By Mechanical Alloying Method. In: Proceeding of the International Conference on science and technology of Iron making and steel making, December 16-18, 2013, CSIR-NML Jamshedpur.

Mishra, D K and Mohapatra, J and Mahato, Banashree and Kumar, P and Mitra, A and Singh, S K and Kanjilal, D (2013) Effect of 1.2 MeV argon ions irradiation on magnetic properties of ZnO. Applied Surface Science, 282 (IF-2.112). pp. 954-959.

Mishra, P N and Goswami, N G and Panda, K C (2013) Impact of grant-in-aid projects at CSIR-National Metallurgical Laboratory, India: A bibliometric study. SRELS Journal of Information Management, 50(4) (IF-). pp. 387-412.

Mishra, Sujata and Bhatta, B C (2013) Solvent Extraction of Zr (IV) from HCl medium using Cyanex 923 as extractant in kerosene. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 299-304.

Mishra, Suman K and Bhattacharyya, A S and Rupa, P K P and Pathak, L C (2013) XPS Studies on Nanocomposite SiCN Coatings Deposited by Magnetron Sputtering. Nanoscience and Nanotechnology Letters, 4 (3). pp. 352-357.

Mishra, Suman K and Mahato, P and Mahato, B and Pathak, L C (2013) Thermal stability and effect of substrate temperature of TiSiBC hard nanocomposite coatings on microstructure, mechanical, thermal behaviour deposited by magnetron sputtering. Applied Surface Science, 266(1 February) . pp. 209-213.

Mishra, T (2013) Pillared clay as an effective catalyst for low temperature VOCs decomposition. Key Engineering Materials, 571 . pp. 71-91.

Mishra, Vidhyadhar and Garai, Subhadra (2013) Synthesis & Characterization of Biphasic Calcium Phosphate Nano composite as Bone Tissue Engineering. Training Report (TR). CSIR-NML, Jamshedpur. (Unpublished)

Mohanta, Ojaswini and Singhbabu, Y N and Giri, S K and Dadhich, D and Das, N N and Sahu, Ranjan K (2013) Degradation of Congo red pollutants using microwave derived SrFe12O19: An efficient magnetic photocatalyst under visible light. Journal of Alloys and Compounds, 564 (IF-2.390). pp. 78-83.

Mohanty, Ashok and Budhwani, Neha and Ghosh, Barun and Tarafder, Mita and Chakravarty, S (2013) Lead content in new decorative paints in India. Environment, Development and Sustainability .

Mohanty, Ashok and Mondal, Aniruddha (2013) Visible light induced synthesis of fluorescent silver clusters in reverse micelles. Nanoscale, 5 (IF-6.233). pp. 7238-7241.

Mohanty, Ashok and Sahoo, K L (2013) Technological Interventions for Brassware Clusters. Science & Culture, 79 . pp. 205-206.

Mohapatra, J and Mishraz, D K and Singh, S K and Mahato, B and Mitra, A (2013) Synthesis of Nanocrystalline Co Doped ZnO by Chemical Route and Its Magnetic Properties. Nanoscience and Nanotechnology letters, 5/5 . pp. 563-567.

Mondal, N and Pathak, P and Sengupta, P P and Roy, B C and Singh, A K and Kumar, S (2013) Reduction in Energy Consumption During Hot Rolling by Roll Bite Lubrication at Hot Strip Mill, Bokaro Steel Plant. In: proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2013) Grain size softening effect in Al62.5Cu25Fe12.5 nanoquasicrystals. Applied Physics Letters, 103 (IF-3.79). p. 201914.

Muralikrishna, A and Bagui, S and Mazumdar, D (2013) Modeling and Measurements of Intermixing Time in a Water Model of a Four Strand Steelmaking Tundish System. Transaction of Indian Institute of Metal, 66(3) . pp. 281-285.

Murthy, G V S and Das, Goutam and Das, Swapan K and Sridhar, G (2013) Microstructural investigation of defects in drill pipe. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 271-278.

Murthy, G V S and Sridhar, G (2013) Ultrasonic C-Scan evaluation of Ti-Alloy / Al brazed joint. Review of progress in quantitative nondestructive evaluation, 1511 . pp. 1120-1124.

N

Nath, Niloy K and Assis, Paulo Santos and Chowdhury, Arunava (2013) Numerical Simulation Of Ingot And Concast Steel Reheating In Batch And Continuous Type Furnace To Optimize Energy Efficiency, Quality And Productivity. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, Decenber 16-18, 2013, CSIR-NML JSR.

Nath, S K and Kumar, Sanjay (2013) Influence of iron making slags on strength and microstructure of fly ash geopolymer. Construction and Building Materials, 38 (IF-1.834). pp. 924-930.

Nautiyal, Ashish and Upadhyay, T C (2013) Theoretical study of second order phase transition in hydrogen bonded order-disorder type pyroelectric cerium doped triglycine sulphate (Ce-TGS) Crystal. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 165-181.

Nayak, B (2013) Mineral matter and the nature of pyrite in some high-sulfur tertiary coals of Meghalaya, northeast India. Journal of the Geological Society, 81(2) . pp. 203-214.

Nayak, B and Das, Swapan K and Munda, Parikshit (2013) Biogenic signature and ultra microfossils in ferromanganese nodules of the Central Indian Ocean Basin. Journal of Asian Earth Sciences, Volume 73, 5 September 2013, Pages 296–305 (IF-2.379). pp. 296-305.

Nazri, Mobashshir Hameed and Ghosh Chowdhury, S (2013) Project Report on Reverse Austenitic Formation in 301 in Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Nguyen, N V and Lee, Jae-chun and Jeong, Jinki and Pandey, B D (2013) Enhancing the adsorption of chromium(VI) from the acidic chloride media using solvent impregnated resin (SIR). Chemical Engineering Journal, 219 . pp. 174-182.

O

Ostwal, Chaitanya and Garg, Ayushi and Saptputre, Pranshu and Sasikumar, C (2013) Investigation of microwave heating in iron production. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Otten, Björn and Bhanja, Asoke (2013) Design, Erection and Implementation of a By-Product Plant at SAIL- IISCO Steel Plant in Burnpur, India1. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

P

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D (2013) Development of Prefused Synthetic Flux for Basic Oxygen Steel Making through Micro-Pelletization and Sintering of Iron Oxide Fines. Steel Research International, 84(11) (IF-0.493). pp. 1115-1125.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D and Ghosh, Sukomal (2013) Development of fluxed micropellets for sintering utilising iron oxide waste fines. Ironmaking & Steelmaking, 40(7) (IF-0.454). pp. 498-504.

Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.

Pal, J and Venugopalan, T and Ghorai, S and Goswami, M C and Prakash, S and Konar, J and Singh, D P (2013) Studies on pellet-sinter composite agglomeration for blast furnace ironmaking. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Metya, Avijit Kumar and Prakash, Amit and Das, Arpan (2013) Development of Methodology to Analyse the Amplitude of Ultrasonic Signal from Shell/Core Interface of ICDP Rolls. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Murthy, G V S and Das, T K and Prakash, Amit and Goel, U S and Venugopalan, T (2013) Surface Wave Based Ultrasonic Technique for finding the Optimal Grinding Condition of High Speed Steel (HSS) Work Rolls. Steel Research International, 84(2) . pp. 163-168.

Palit Sagar, S and Parida, N (2013) Quality Assessment of Coated Rear Housing Component by Ultrasonic Technique. Consultancy (CNP). CSIR-NML.

Palit Sagar, S and Prakash, Amit and Metya, Avijit Kumar (2013) Determination of modulus of Aluminium alloy by ultrasonic technique. Sponsored (SSP). Internal Report, Jamshedpur.

Palit Sagar, S and Ravi Kumar, B and Murthy, G V S and Metya, Avijit Kumar and Prakash, Amit and Mahato, B (2013) Evaluation of Residual Stress of HSS Rolls by Ultrasonic and X-ray diffraction based techniques. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Panda, A K and Roy, Rajat K and Dey, Sushmita and Singh, S and Mitra, A (2013) Functional gradation through preferential crystallisation and interfacial activity in rapidly quenched Fe/Co-based bilayered ribbons for bend sensors. Journal of Applied Physics, 114/2 . 023909.

Panda, A K and Roy, Rajat K and Mitra, A (2013) Electromagnetic Non-destructive Evaluation of Post Weld Heat Treated Modified9Cr-1Mo Steel Weldments. In: Asia pacific conference on NDT (APCNDT) 2013, 18-22 Dec 2013, Mumbai.

Pani, Santosh and Dey, Shobhana and Singh, Ratnakar (2013) Quantitative Evaluation of Frother Blend Interaction and Its Effect on Coal Flotation. In: Proceedings of the XIII International Seminar on Mineral Processing Technology (MPT-2013), 10-12 December, 2013, IMMT, Bhubaneswar.

Pansari, Avinaw and Palit Sagar, S (2013) Development of an Online IR-Thermography based Non-Invasive Technique to Detect and Estimate Iron in Galvannealed IF Steel Sheet. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Parijat, Prateek and Bhattacharya, Maitreyee (2013) Process for the Recovery of Tungsten by Oxidative Roasting and Leaching. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Parveen, Nikhat and Murthy, G V S (2013) Characterization of electrical behavior in modified ilmenite. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 195-200.

Paswan, Dayanand and Mistry, D and Sahoo, K L and Srivastava, V C (2013) Development of Iron-based Closed-Cell Foams by Powder Forging and Rolling. Journal of Materials Engineering and Performance, 22(8) (IF-0.915). pp. 2201-2209.

Pathak, B N and Sahoo, K L and Mishra, Madhawanand (2013) Effect of Machining Parameters on Cutting Forces and Surface Roughness in Al-(1-2) Fe-1V-1Si Alloys. Materials and Manufacturing Processes, 28(4) . pp. 463-469.

Patil, Deepak C and Kori, S A and Venkateswarlu, K and Das, Goutam and Alhajeri, S N and Langdon, T G (2013) Using ball indentation to determine the mechanical properties of an Al-7475 alloy processed by high-pressure torsion. Journal of Materials Science, 48(13) (IF-2.163). pp. 4773-4779.

Patil, M R and Ravi, B P and Krishna, S J G and Kumar, P S and Rudrappa, C and Gundewar, C S (2013) Processing Studies on Iron Ore Tailings Sample For Pelletisation Plant From Barbil Region, Orissa. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Paul, Surajit Kumar and Tarafder, S (2013) Cyclic plastic deformation response at fatigue crack tips. International Journal of Pressure Vessels and Piping, 101 (IF-0.989). pp. 81-90.

Peyton, A J and Stefani, F and Eckert, S and Timmel, K and Wondrak, T and Gerbeth, G (2013) Electromagnetic Induction Tomography for Monitoring Liquid Metal Flow During Continuous Casting. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Phani Kiran, K S and Sivalingaraju, B and Reddy, Siddaling and Venkateswarlu, Y and Marutiram, K and Naha, T K (2013) Use of Petroleum Coke as an Additive in Metallurgical Coke Making. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Pradhan, A M (2013) Myth and Migration: A Revisit to Historiography of Kuidina'. journal Scheduled Castes & Scheduled Tribes Research and Training Institute (SCSTRTI), 53(1&2) . pp. 112-121.

Prakrathi, S and Udupa K, Rajendra and Bhat K, Udaya (2013) Microstructural characterization and indentation creep behavior of friction stir modified Al surface with iron powder. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 131-140.

Pramanick, A K and Dhayal, A and Kailath, A J and Yaneva, S and Stoichev, N (2013) Oxide Layers on Rapidly Solidified and Bulk Al-Si-Zr Alloys Formed by Oxidation in Air and Anodizing Process. In: Nanoscience & Nanotechnology-13. Bulgarian Academy of Sciences, Bulgaria, pp. 137-139. ISBN ISBN 1311-9702

Pramanick, A K and Sinha, Arvind and Nayar, S and Das, Goutam and Mitra, A (2013) Biomimetic Hydroxyapatite Coating on Zirconium Based Biocompatible Alloys. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Submitted)

Pramanik, S and Mitra, S K (2013) Hollow Briquette- A Novel Method of Agglomeration. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Pramanik, Swati and Purohit, Bijoy Kumar and Meshram, Pratima and Sahu, S K and Pandey, B D (2013) Chemical Beneficiation of Physically treated Hingula coal on Laboratory scale. In: Proceedings of the XIII lnternational Seminar on Mineral Processing Technology (MPT-20 I 3), 10/12/2013 to 12/12/2014, CSIR-IMMT, Bhubaneswar.

Pramanik, Swati and Sahu, S K and Meshram, Pratima and Pandey, B D (2013) Arsenic removal from spent liquor generated during processing of vanadium sludge. Advanced Materials Research: Harnessing of Nonferrous Minirals, Metals and Wastes, 828 . pp. 55-63.

Prasad, Sanjay (2013) Recycling of zinc dross to produce electrolytic zinc powder. Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 163-169.

Puranika, Ganesha and Raj, Manish and Borkar, Moreshwar and Lakshminarasimham , B (2013) Impact Of Chemistry And Inclusions On Fracture Toughness Of Rail Steel:Case Study At JSPL. In: Procceding of the Inter national conference on science and technology of Iron making and steel making, December 16-18, 2013, CSIR-NML Jamshedpur.

Purohit, Bijoy Kumar and Pramanik, Swati and Meshram, Pratima and Sahu, S K and Pandey, B D (2013) Chemical beneficiation of hingula coal. 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 89-93.

R

Rajnikanth, V and Mukherjee, K and Ghosh Chowdhury, S and Schiebahn, A and Harms, A and Belck, W (2013) Mechanical property and microstructure of resistance spot welded twinning induced plasticity-dual phase steels joint. Science and Technology of Welding and Joining, 18/6 (IF-1.274). pp. 485-491.

Raju, K and Goudar, D M and Srivastava, V C and Rudrakshi, G B (2013) Wear behavior of secondary processed spray formed Al-28Si-5Cu-4Mg alloy. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Randhawa, N S and Das, N N and Jana, R K (2013) Adsorptive remediation of Cu(II) and Cd(II) contaminated water using manganese nodule leaching residue. Desalination and Water Treatment, Online (IF-0.825). pp. 1-15.

Randhawa, N S and Das, N N and Jana, R K (2013) Cadmium removal using waste residue generated after recovery of base metals from manganese nodules. Indian Journal of Chemical Technology (0.61). pp. 371-379.

Randhawa, N S and Dwivedi, D and Prajapati, S and Jana, R K (2013) Application of manganese nodules leaching residue for adsorption of nickel(II) ions from aqueous solution. International Journal of Environmental Science and Technology, Online (IF-1.80). pp. 1-7.

Randhawa, N S and Dwivedi, Deepak and Prajapati, Sonu and Jana, R K (2013) Utilisation of sea nodules leaching residue for adsorption of Ni(II) ions. Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 186-196.

Randhawa, N S and Jana, R K (2013) Different applications of waste generated in reduction roasting – ammonia leaching of manganese nodules. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2013, 12-15 November 2013, IIT-BHU, Varanasi.

Randhawa, N S and Jana, R K (2013) Lead sorption by sea nodule residue generated in reduction roasting – ammonia leaching. In: Mineral Processing Technology- 2013, 10-12 December 2013, Bhubaneshwar.

Randhawa, N S and Katiyar, P K and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2013) Anodic dissolution behaviour of tungsten carbide scraps in ammoniacal media. In: 17th Int. Conf. on non-ferrous Met. 2013, 5-6 July 2013, Ranchi (India).

Ranjan, Priya and Goswami, B and Prasad, Sanjay and Sharma, G S and Singh, R P and Prasad Rao, S Siva and Das, Goutam (2013) Microstructure and properties of the new bainitic rail steels. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 119-130.

Ranjan, Rajeev and Srivastava, R K and Paswan, M K (2013) Quality Engineering Applications in Continuous Casting for Steel Making Technology. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Rao, M Ananda (2013) Metallurgical Failures in thermal power plants-Case studies. In: Technological Trends & advances in efficient operation & maintenance of boilers, 7th – 8th February 2013, National Productivity Council, Chennai-98.

Rao, M Ananda and Rajesh, K and Kumar, M V Pavan (2013) Evolution of Corrosion Damage to Cold rolled grain oriented Steel Sheets under rainwater followed by Ambient Atmosphere Exposure. Engineering Failure Analysis, 30 (IF-0.855). pp. 10-16.

Rao, Y S and Bandyopadhyay, A and E, Murugan (2013) Recycling of Corex Sludge Through Sludge Agglomeration Process. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Rath, R K and Mohanty, Sunati and Nayak, B and Singh, Ratnakar and Bhattacharyya, K K (2013) A Comparative Study on Processing of High Alumina Hematite Iron Ore by Gravity, Magnetic and Flotation Methods. Journal of Materials Science and Engineering A, 3(5) . pp. 349-354.

Ravi Kumar, B and Madhukar, A and Srivastava, V C and Ghosh Chowdhury, S (2013) Chronology of product development at CSIR-NML. Steel Tech .

Ravi Kumar, B and Sharma, S (2013) Recrystallisation Characteristics of Cold Rolled Austenitic Stainless Steel during Repeated Annealing. Recrystallization and Grain Growth V, 753 . pp. 157-162.

Ravi Kumar, B and Sharma, Sailaja and Munda, Parikshit and Minz, R K (2013) Structure and microstructure evolution of a ternary Fe–Cr–Ni alloy akin to super martensitic stainless steel. Materials & Design, 50 (IF-2.913). pp. 392-398.

Ray, Ajoy K and Kar , Abhijit and Kori, S A and Pathak , L C and Sonnad, A N (2013) Graphite-to-304SS Braze Joining by Active Metal-Brazing Technique : Improvement of Mechanical Properties. Journal of Materials Enginnering and Performance, 22(1) (IF-0.915). pp. 258-266.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2013) Frontiers of micro-alloyed steel for industrial merchandising-1. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 83-98.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2013) High strength low alloy steels. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 21-36.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2013) Studies on pyrometallurgy of vanadium bearing iron, steel and slag. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 99-111.

Ray, Kalyan Kumar and Roy, Himadri and Ray, Ayan and Dutta, Krishna and Tarafder, S (2013) Deformation, fatigue and fracture vis-à-vis deformation induced martensite in AISI 304LN stainless steel. Advanced Materials Research, 794 . pp. 415-428.

Ray, M K and Bagani , K and Sardar, M and Banerjee, S and Srivastava, V C and Mukhopadhyay, N K (2013) Electrical and magnetic property of Al 62 Cu 25.5 Fe 12.5 icosahedral quasicrystal: Spin-orbit scattering. AIP Conference Proceedings, 1512 . pp. 994-995.

Reddy, G J and Srivastava, V C and Rudrakshi, G B (2013) Wear Behavior Of Spray Formed Al–20 Mg 2 Si Alloy. International Journal of Engineering Research & Technology, 2(2) . pp. 1-9.

Reddy, P S R (2013) Challenges and opertunities of coal cleaning in India. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Reddy, S and Wasnik, S and Guha, Avijit and Kumar, J M and Sinha, Arvind and Singh, Shashi (2013) Evaluation of nano-biphasic calcium phosphate ceramics for bone tissue engineering applications : In vitro and preliminary in vivo studies. Journal of Biomaterials Applications, 27(5) (IF-2.640). pp. 565-575.

Reddy, S P and Sarath, K Sai (2013) Characterstics of Al-15% graphite composites. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 73-76.

Roshan, Vibhuti and Chandra, Anand and Sharma, S K and Nageswara Rao, G V S (2013) Effect of Surface Area on Green Properties of Micro Pellets. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Rout, Bapin K and Awasthi, S and Choudhary, S K and Singh, R K and Ajmani, S K (2013) Development of Nozzle Clogging Index to Assess The Casting Behavior During Continuous Slab Caster At. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Routh, Anup Kumar and Samanta, Manas (2013) Role of public library in intellectual property rights [In Bengali] (মেধাস্বত্ত সংরক্ষনে সাধারণ গ্রন্থাগারের ভূমিকা). Granthagar, 63(4) . pp. 88-91.

Roy, Arijit and Manna, I and Tarafder, S and Chattoraj, I (2013) Hydrogen interactions with overload in modifying fatigue crack growth rate recovery in an HSLA steel. Materials Science and Engineering A, 579 (IF-2.108). pp. 9-17.

Roy, Arijit and Manna, I and Tarafder, S and Sivaprasad, S and Paswan, S and Chattoraj, I (2013) Hydrogen enhanced fatigue crack growth in an HSLA steel. Materials Science and Engineering A, 588 (IF-2.108). pp. 86-96.

Roy, H and Ray, A and Barat, K and Hochmuth , C and Sivaprasad, S and Tarafder, S and Glatzel, U and Ray, K K (2013) Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steel. Materials Science & Engineering A, 561 (IF-2.003). pp. 88-99.

Roy, Nilima and Bagui, S and Sahu, J K and Ray, A K (2013) Creep characterization and damage assessment of long term service exposed P-22 grade of steel. Materials Science and Engineering A, 560 (IF-2.108). pp. 802-810.

Roy, Nilima and Guguloth, K and Bagui, Sumanta and Tiwari, Y N and Ray, Ashok K (2013) Damage assessment of service exposed reactor and distill-ation column materials of a petrochemical industry. Engineering Failure Analysis, 28 (IF-0.855). pp. 289-301.

Roy, Rajat K and Bapari, H and Panda, A K and Mitra, A (2013) Development of high strength stainless steel brazed joints using rapidly solidified filler alloys. Science and Technology of Welding and Joining, 18(3) (IF-1.274). pp. 216-221.

Roy, Rajat K and Das, Swapan K (2013) Failure of LTSH tubes in a coal fired thermal power plant. Metal News, 16(2) (Non-SCI). pp. 14-16.

Roy, Rajat K and Panda, A K and Mitra, A (2013) Microstructure Evolution and Bonding Strength of Brazed Joint of Stainless Steel and Copper. Indian Welding Journal, 46(1) . pp. 1-5.

Roy, Subrata and Das, Avimanyu (2013) Recovery of Valuables From Low Grade Iron Ore Slime and Reduction of Waste Volume by Physical Processing. Particulate Science and Technology: An International Journal, 31(3) (IF-). pp. 256-263.

Rudrakshi, G B and Goudar, D M and Srivastava, V C (2013) A Comparative Study on Microstructure and Tensile Properties of Spray Formed and Ascast Al-28Si-5Cu-4Fe and Al-28Si-5Cu-4Mg Alloys. In: World Congress on Engineering 2013, July 3-5, 2013, London, UK.

Rudrappa, C and Patil, M R and Rudramuniyappa, M V and Naganoor, P C and Ravi, B P and Chitraki, K (2013) Beneficiation Studies on a Sub Grade Iron Ore Sample Form Barbil Region, Orissa. In: Proceeding of the international on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Rudrappa, C and Patil, M R and Rudramuniyappa1, M V and Naganoor, P C and Ravi, B P and Chitraki, K (2013) Beneficiation Studies on a Sub Grade Iron Ore Sample From Barbil Region, Orissa. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

S

Sah, Rameshwar and Dutta, S K and Singh, Vimal and Ghorui, P K (2013) Kinetics and Mechanism of Reduction of Iron Ore-Coal Composite Pellets and Its Usage in Smelting Reduction Process. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Sahoo, K L and Sahu, Rina (2013) Glass transition and crystallization of Al–Ni–La based metallic glasses studied by temperature modulated DSC. Journal of Non-Crystalline Solids, 365 (IF-1.597). pp. 33-36.

Sahu, A K and Goswami, N G and Choudhury, B K (2013) Establishing global visibility of institutional research output of CSIR-NML - A case study. In: National Conference on Reaching Out to Users through Technology (ROUTE-2013), 13-15 March, 2013, CSIR-SERC, Chennai.

Sahu, A K and Goswami, N G and Choudhury, B K (2013) Institutional Repository of CSIR-NML and the global information seeker. Annals of Library and Information Studies, 60 . pp. 36-40.

Sahu, J K and Gupta, R K and Swaminathan, J and Paulose, N and Mannan, S L (2013) Influence of hot Corrosion on Low Cycle fatigue behavior of Nickel base Superalloy SU 263. International Journal of Fatigue, 51 (IF-1.976). pp. 68-73.

Sahu, K K and Agrawal, A and Mishra, D (2013) Hazardous waste to materials : Recovery of molybdenum and vanadium from acidic leach liquor of spent hydroprocessing catalyst using alamine 308. Journal of Environmental Management, 125 (IF-3.057). pp. 68-73.

Sahu, S C and Samantara, A K and Dash, A and Juluri, R R and Sahu, Ranjan K and Mishra, B K and Jena, B K (2013) Graphene-induced Pd nanodendrites: A high performance hybrid nanoelectrocatalyst. Nano Research, 6/9 . pp. 635-643.

Samal, S and Ray, Ajoy K and Bandopadhyay, A (2013) Proposal for resources, utilization and processes of red mud in India - A review. International Journal of Mineral Processing, 118 (IF-1.378). pp. 43-45.

Samanta, Salkat and Goswami, M C and Baidya, T K and Mukherjee, S and Dey, R (2013) Mineralogy and carbothermal reduction behaviour of vanadium-bearing titaniferous magnetite ore in Eastern India. International Journal of Minerals Metallurgy and Materials, 20(10) (IF-0.483). pp. 917-924.

Santosh, Sachin and Shukla, A K (2013) Data Based Modeling Approach to Iron and Steel Making Processes. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking , December 16-18, 2013, CSIR-NML Jamshedpur.

Santra, Chiranjit and Rahman, Sumbul and Bojja, S and James, O O and Sen, D and Maity, S and Mohanty, Ashok and Mazumder, S and Chowdhury, Biswajit (2013) Barium, calcium and magnesium doped mesoporous ceria supported gold nanoparticle for benzyl alcohol oxidation using molecular O2. Catalysis Science & Technology, 3 (IF-3.753). pp. 360-370.

Sarkar, Partha and Roy, Rajat K and Panda, A K and Mitra, A (2013) Optimization of process parameters for developing FeCoSiB amorphous microwires through in-rotating-water quenching technique. Applied Physics A Materials Science & Processing, 111 (IF-1.630). pp. 575-580.

Sarkar, Rahul and Gupta, Pramod and Ballal, N B (2013) Refining of metal droplet in slag using the concept of Gibbs’ Free Energy Minimization at the slag-metal interface. In: Proceedings of The International Conference on Science and Technology of Ironmaking and Steelmaking, Decmber 16-18, 2013, CSIR-NML, JSR.

Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2013) A Mathematical Model of The Raceway for Real time Application to an Operating Blast Furnace with Pulverized Coal Injection. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Selvam, S T and Chaudhuri, S and Das, Arpan and Dhara, S and Das, T P and Singh, U K (2013) Improving Productivity of Sinter Through Magnetic Segregation Chute at Sinter Plant, Bokaro Steel Plant, Bokaro Steel Plant. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Senk, Dieter (2013) Continuous Casting - Continuous Development. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Sharma, Jyoti and Sharma, T (2013) Making of Ferro Coke from Low Volatile Coking Coal. In: Proceeding of the International Conference of Science and Technology of Ironmaking and Steelmaking , December 16-18, 2013, CSIR-NML Jamshedpur.

Sharma, T and Sharma, Jyoti (2013) Firing Schedule for Goethitic Iron Ore Pellets. In: Proceeding of the International conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Sheethal, S (2013) Evaluation and optimization of electromagnetic stirring (EMS) parameters for continuously cast high carbon billet quality using ultrasonic c-scan imaging. Masters thesis, NIT, Trichy.

Shin, Doyun and Jeong, Jinki and Lee, Sujeong and Pandey, B D and Lee, Jae-chun (2013) Evaluation of bioleaching factors on gold recovery from ore by cyanide-producing bacteria. Minerals Engineering, 48 (IF-1.207). pp. 20-24.

Shravan Kumar, K and Biswas, Krishanu (2013) Effect of thiourea on grain refinement and defect structure of the pulsed electrodeposited nanocrystalline copper. Surface and Coatings Technology, 214 (IF-1.867). pp. 8-18.

Singh, A and Singh, B P and Wani, M R and Kumar, D and Singh, J K and Singh, Vakil (2013) Effect of anodization on corrosion behaviour and biocompatibility of Cp-titanium in simulated body fluid. Bulletin of Materials Science, 36(5) (IF-0.584). pp. 931-937.

Singh, Ajay (2013) Effect of overaload on fatigue crack propagation. Masters thesis, National Institute of Technology , Warangal.

Singh, Ashok K and Sharma, Mamta and Singh, Mahendra P (2013) SEM and reflected light petrography: A case study on natural cokes from seam XIV, Jharia coalfield, India. Fuel, 112 (IF-3.357). pp. 502-512.

Singh, D D N and Venugopalan, T (2013) Understanding the Corrosion and Remedial Measures to Control the Deterioration of Reinforcement Steel Bars by Modification in Their Chemistry and Application of Surface Coatings. Transactions of the Indian Institute of Metals, 66(5-6) (IF-0.215). pp. 677-687.

Singh, Nalin K and Roushan, R K S (2013) Data Analytics and Decision Support in the context of ERP and beyond for giving CSIR a Competitive advantage – two case studies from HR (Human Resources) and MM (Materials Management) Modules. In: National Conference on Modeling Design Solutions for technology Development and decision support, May 10, 2013, CSIR-NISCAIR.

Singh, R J and Surbhi, (2013) Lowering of alumina in high alumina iron ores to produce DR grade iron ore pellets. Journal of Metallurgy and Materials Science, 55(1) . pp. 37-48.

Singh, R K and Misra, S (2013) Corrosion protection of stainless steel in CO2 environment by nanocoating of zinc phosphate with DLC filler. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 149-156.

Singh, Raghuvir and Kumar, Mukesh and Ghosh, M and Das, Goutam and Singh, P K and Chattoraj, I (2013) Intergranular Corrosion Behavior of 304LN Stainless Steel Heat Treated at 623 K (350 degrees C). Metallurgical and Materials Transactions A-Physical Metallurgy and Materials and Materials Science, 44A (IF-1.627). pp. 173-187.

Singh, Rajesh Kumar and Misra, S (2013) Corrosion protection of rebar steel in marine atmosphere by nanocoating. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 313-321.

Singh, Rajesh Kumar and Misra, S (2013) Corrosion protection of mild steel in SO2 environment by nanocoating with filler. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 227-234.

Singh, Ranjeet K and Das, Avimanyu (2013) Analysis of separation response of Kelsey centrifugal jig in processing fine coal. Fuel Processing Technology, 115 (IF-2.816). pp. 71-78.

Singh, Satnam and Roy, P K and Ghosh, M and Mitra, A and Panda, A K (2013) Martensitic transformation and magneto-strain in melt spun NiMnGaAl Ferromagnetic Shape Memory Alloys. Intermetallics, 43 (IF-1.857). pp. 147-151.

Singh, Satnam and Roy, Rajat K and Ghosh, M and Manik, N B and Mitra, A and Panda, A K (2013) Modification in martensite morphology and magneto-strain through rapid solidification and heat treatment of NiMnGaAl alloy. Journal of Magnetism and Magnetic Materials, 343 (IF-1.826). pp. 169-172.

Singh, V and Biswas, N and Chakravarty, T and Rao, S Mohan and Banerjee, P K (2013) Exploitation of lean grade manganese ores from Joda Mines. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 59-65.

Singhbabu, Y N and Sahu, K K and Dadhich, D and Pramanick, A K and Mishra, T and Sahu, Ranjan K (2013) Capsule-embedded reduced graphene oxide: synthesis, mechanism and electrical properties. Journal of Materials Chemistry, 1 (IF-5.97). pp. 958-966.

Srinivasan, A and Ajithkumar, K K and Swaminathan, J and Pillai, U T S and Pai, B C (2013) Creep Behavior of AZ91 Magnesium Alloy. Procedia Engineering, 55 . pp. 109-113.

Srivastava, R R and Mishra, A N and Singh, V K (2013) Co-precipitation study of nickel and cobalt from ammoniacal leach liquor of laterite ore. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 67-72.

Srivastava, Sachin and Mandal, Durbadal (2013) Effect of Mechanical Processing and Heat Treatment on Micro-structural Analysis of 7075 Aluminium Alloys. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Srivastava, V C and Ellendt, N and Meyer, C and Uhlenwinkel, V (2013) Synthesis of bulk amorphous and nano-crystalline materials by spray forming. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Srivastava, V C and Saarivirta, E.H. and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2013) Development of bulk quasicrystalline materials by spray forming. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Srivastava, V C and Surreddi, K B and Scudino, S and Uhlenwinkel, V and Schowalter, M and Schulz, A and Eckert, J and Rosenauer, A and Zoch, H -W (2013) Microstructural characteristics of spray formed and heat treated Al–(Y, La)–Ni–Co system. Journal of Alloys and Compounds, 578 (IF-2.390). pp. 471-480.

Srivastava, V C and Uhlenwinkel, V (2013) Application Oriented New Materials by Spray Forming. The Banaras Metallurgist, 18 . pp. 21-29.

Stefanov, G and Stoichev, N and Avdeev, A and Kiradzhiyska, D and Vassilev, G and Pramanick, A K (2013) Phase Composition and High-Temperature Oxidation Behaviour of Nano-Microcrystalline Al-Si11-Zr Alloys. In: Nanoscience & Nanotechnology-13. Bulgarian Academy of Sciences, Bulgar, pp. 140-143.

Suresh, B and Rao, M Ananda and Bisoyi, Suryanarayan and Umadevi, T and Sah, Rameshwar and Ram, Maruti K (2013) Response of Reverse Flotation on Iron Ore Slimes Varying in Size Distribution and Assay Content. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Suresh, Nikkam (2013) Flowsheet Design and Layout Preparation of Coal Processing Plants. In: proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Suresh, S and Viswanathan, N N (2013) Microwave mineral processing : A challenge in process intensification. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 141-148.

Suvarna, Kripa M and Udupa, K. Rajendra and Surendranathan, A O (2013) Corrosion studies on 316L fusion zone and base metal in natural sea water by weight loss method. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 219-226.

T

Tarafder, Mita and Sinha, Pankhuri and Kundu, Amrita and Strangwood, M and Davis, Claire (2013) Fractal based correlations for Nb microalloyed steel undergoing static recrystallization. Materials Characterization, 85 . pp. 92-99.

Tarafder, Mita and Sujata, M and Ranganath, V R and Tarafder, S and Bhumik, S K (2013) Microstructural Damage Evaluation in Ni-based Superalloy Gas Turbine Blades by Fractal Analysis. Procedia Engineering, 55 . pp. 289-294.

Teng, Lidong and Eriksson, Jan-Erik and Badrinathan, Raghu and Sjöden, Olof and Lehman, Anders (2013) Impact Of Electromagnetic Stirring (EMS) On The EAF Process. In: Proceeding of the International Conference on Science and Technology Of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Thriveni, Thenepalli and Ahn, Young Jun and Han, Choon and Nam, Um and Ahn, Ji-Whan (2013) Scalenohedral calcite crystal growth by carbonation process for CO2 sequestration. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 49-57.

Tilak, Raj and Humane, M M (2013) Study of Microstructure and Texture of Cold Rolled Grain Oriented Electrical Steels. Training Report (TR). CSIR-NML, Jamshepur. (Unpublished)

Tiwari, S K and Choubey, Pankaj K and Mahapatra, S P (2013) Bound rubber properties of chlorobutyl elastomer nanocomposites: effect of carbon nanotube and storage time. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 187-193.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2013) Influence of SiO, Substitution on Corrosion Behavior of Sol-gel TiO,Coating on Mild Steel. IIM Metal News, 16(5) . pp. 1-4.

U

Um, Nam Il and Thriveni, Thenepalli and Nam, Seong-Young and Ahn, Ji-Whan (2013) Effect of water content on accelerated carbonation of municipal solid waste incinerator bottom ash for CO2 capture. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 113-117.

Upadhyay, Hemant and Kundu, T K (2013) Drain Rate and Liquid Level Simulation in Blast Furnace Hearth Based on Plant Data. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

V

Vaish, A K and Singh, S D and Minj, R K and Gupta, R C (2013) Exploration and Exploitation of Multi-Metallic Magnetite Ore of Nagaland for Value Added Product. Transactions of the Indian Institute o Metals, 66(5-6) (IF-0.215). pp. 491-499.

Vasumathi, N and Vijaya Kumar, T V and Ratchambhigai, S and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G and Shivakumar, S and Uma, Raman (2013) Single reagent for graphite flotation. In: XIII International Seminar on Mineral Processing Technology (MPT 2013), 11 to 13 December 2013, CSIR-IMMT, Bbubaneswar.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2013) Column flotation technology for the beneficiation of coking and non-coking coal fines. In: National seminar on Coal Preparation Technology, CPT-2013, CSIR-CIMFR, Dhanbad, 22 -23 Feb 2013, CSIR-CIMFR, Dhanbad.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G and Shivakumar, S and Raman, Uma (2013) Single reagent for coal flotation. In: National Conference on Coal Preparation Technology 2013, 22-23 Feb 2013, CSIR-CIMFR, Dhanbad.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G and Shivakumar, S and Uma, Raman (2013) Eco Friendly and Cost-Effective Reagent for Coal Flotation. International Journal of Engineering Research, 2(7) (IF-0.421). pp. 418-423.

Venkata Siva, S B and Ganguly, R I and Srinivasarao, G and Sahoo, K L (2013) Machinability of Aluminum Metal Matrix Composite Reinforced with In-Situ Ceramic Composite Developed from Mines Waste Colliery Shale. Materials and Manufacturing Processes, 28(10) . pp. 1082-1089.

Venkata Siva, S B and Sahoo, K L and Ganguly, R I and Dash, R R and Singh, S K and Satpathy, B K and Srinivasarao, G (2013) Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material. Metallurgical and Materials Transactions B , 44 (IF-1.212). pp. 800-808.

Venkata Subramanian, G S and Deshmukh, P R (2013) Clean Coke Making Technologies. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Venkatesan, J and Ashok, K and Venkatakrishnan, P G (2013) Quantification of Slag Carry Over & Its Effect on Melting Practice of Medium Carbon Re-Sulphur Steel. In: Proceedings of The International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, CSIR-NML, JSR.

Venugopalan, T and Misra, S and Srikanth, S and Tarafder, S (2013) Preface. Transactions of Indian Institute of Metals, 66(5-6) Special Issue: SI (IF-0.215). p. 445.

Verma, N P and Sinha, Arvind (2013) Effect of solid to liquid ratio on the physical properties of injectable nanohydroxyapatite. Journal of Materials Science-Materials in Medicine, 24(1) (IF-2.141). pp. 53-59.

Vidyadhar, A and D, Renuka and Sharma, Mamta and Das, Avimanyu (2013) Beneficiation of High Ash Non-Coking Coal from Vasundhra Mines, Odisha. In: Twenty-sixth National convention of Metallurgical and Materials Engineers & National seminar on "Exploitation of Lean Grade Ore, Ore Fines and Urban Ores: Challenges, Problems and Solutions, 22-23 January, 2013, CSIR - National Metallurgical Laboratory.

Vidyadhar, A and Das, Avimanyu (2013) Enrichment implication of froth flotation kinetics in the separation and recovery of metal values from printed circuit boards. Separation and Purification Technology, 118 (IF-3.065). pp. 305-312.

Vidyadhar, A and Das, Avimanyu (2013) Stratification and segregation features of pulverized electronic waste in flowing film concentration. Journal of Environmental Management, 118 (IF-3.188). pp. 49-54.

Vidyadhar, A and Kumari, Neha and Sharma, Mamta and Singh, Ratnakar and Das, Avimanyu (2013) Beneficiation of Non-Coking Coal for Generating Low Ash Clean Coal. In: Recent Trends & Future Needs in Coal Preparation (CPT - 2013), 22-23 February, 2013, CSIR-CIMFR, Digwadih campus, Dhanbad.

Vidyadhar, A and Renuka, D and Sharma, Mamta (2013) High Ash Non-Coking Coal from India: Beneficiation and Implications. In: Proceedings of the XIII International Seminar on Mineral Processing Technology (MPT-2013), 10-12 December, 2013, IMMT, Bhubaneswar.

Vijaya Kumar, T V and Gopalakrishna, S J (2013) Laboratory Column flotation studies for reduction of alumina and silica in iron ore slimes of an operating plant. Proceedings of the XIII International Seminar on Mineral Processing Technology (MPT – 2013) , 2 . pp. 406-415.

Vijaya Kumar, T V and Gopalakrishna, S J (2013) Selection of cationic collector for reduction of alumina and silica in iron ore slimes of an operating plant by flotation. International Journal of Engineering Sciences & Research Technology, 2/11 (IF-1.852 (International Society for Research Activity - ISRA)). pp. 3295-3302.

Vijaya Kumar, T V and Vasumathi, N and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2013) Recovery of ultrafine iron values from tailing pond of iron ore washing plants. The Indian Mineralogist, 1-2 . pp. 83-92.

Vijayendra, G V and Humane, M M (2013) Study of Microstructure and Texture of Cold rolled Grain Oriented Electrical Steels. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Viswanath, S G and Jachak, Manish M (2013) Preparation of electrolytic cobalt powder by electrodeposition from cobalt sulphate solution in presence of glycerol and sulfuric acid medium and the study of morphology of the powder. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 279-291.