On the Relation of Microstructure and Texture Evolution in an Austenitic Fe-28Mn-0.28C TWIP Steel during Cold Rolling

In the present study, microstructure and texture evolution in an austenitic Fe-28 wt pct Mn-0.28 wt pct C TWIP steel in the range between 10 and 80 pct reduction by cold rolling were systematically analyzed. The formation of the observed microstructural features occurred in three different stages: I(10 to 20 pct)- mainly slip lines, grain elongation, and formation of few twin-matrix lame-llae; II(30 to 50 pct) -severe increase of the volume fraction of twins, alignment of twins with the rolling plane, and formation of microshear bands; and III (60 to 80 pct)- further alignment of twins, evolution of a herring bone structure, and macroshear bands. In contrast most f.c.c. metals, the transition from Copper-to Brass-type texture occured at low strain levels (30 pct). This behavior is attributed to the early formation of defo-rmation twins in the material and can be related to the SFE of this high manganese steel. At higher reduction
levels, microscopic (a parts per thousand yen40 pct) and macroscopic shear band formation (a parts per thousand yen60 pct)contributed to the increase of randomly orie-nted grains, mainly at the expense of the Brass compo-nent. Furthermore, the formation of the Goss component
and of the aOE(c)111>//ND fiber (gamma)is attributed to severe twin formation.