Items where Division is "Material Science and Technology" and Year is 2006

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: B | C | D | G | J | K | M | N | P | R | S | T | V
Number of items: 100.

B

Basu, Bikramjit and Mishra, Suman K (2006) Development of toughened zirconia composites ceramics for tribological application. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

C

Chaudhuri, S (2006) Some aspects of metallurgical assessment of boiler tubes—Basic principles and case studies. Materials Science and Engineering A, 432 (1-2). pp. 90-99.

D

Das, Goutam and Chakravarty, S and Datta, A K and Das, Swapan K and Gupta, K K and Ghosh, R N (2006) Failure analysis of a high mast lamp post. Engineering Failure Analysis, 13 (7). pp. 1153-1158.

Das, Goutam and Ghosh, Sabita and Bose, S C and Ghosh, Sukomal (2006) Use of ball indentation technique to evaluate room temperature mechanical properties of a gas turbine blade. Materials Science and Engineering A, 424 (1-2). pp. 326-332.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal (2006) Structure–property correlation of EN steel and evaluation of mechanical properties through BIT. NDT & E International, 39 (2). pp. 155-161.

Das, S K and Godiwalla, K M and Mehrotra, S P and Dey, P K and Mandal, D and Hegde, Shubha (2006) Mathematical modelling of ductile erosion behaviour of impacted fly ash particles on steel components of a coal fired boiler. In: 60 Annual Technical Meeting, November, 15-16 2006, IIM & Tata Steel,Jamshedpur.

Das, Suchandan K and Godiwalla, K M and Hedge, Shubha S and Mehrotra, S P and De, P K (2006) A stochastic model for prediction of Erosion-oxidation interaction on boiler grade steel Surfaces. In: Proceedings of International Conference on Industrial Tribology – 2006, Nov 30-Dec 02, 2006, Indian Institute of Science, Bangalore, India.

Das, Swapan K and Chatterjee, S and Tarafder, S (2006) Tensile fracture behaviour of microstructurally engineered Cu bearing high strength low alloy steel. Materials Science and Technology, 22 (12). pp. 1409-1414.

Das, Swapan K and Singh, S R and Gunjan, M K (2006) Investigation on Failure of Drop Tank Suspension Rod of Mig-21 T-96 Aircraft. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Das, Swapan K and Sivaprasad, S and Das, S and Tarafder, S (2006) The effect of variation of microstructure on fracture mechanics parameters of HSLA-100 steel. Materials Science and Engineering A, 431 (1-2). pp. 68-79.

Das Bakshi, Srimanta and Basu, Bikramjit and Mishra, Suman K (2006) Fretting wear properties of sinter-HIPed ZrO2–ZrB2 composites. Composites Part A Applied Science and Manufacturing, 37 (10). pp. 1652-1659.

Das Bakshi, Srimanta and Basu, Bikramjit and Mishra, Suman K (2006) Microstructure and mechanical properties of sinter-HIPed ZrO2–ZrB2 composites. Composites Part A Applied Science and Manufacturing, 37 (11). pp. 2128-2135.

Datta, A K and Das, Goutam and De, P K (2006) Finite element modelling of steel rolling process. Journal of Metallurgy and Materials Science, 48 (3). pp. 173-180.

Datta, A K and Das, Goutam and De, P K (2006) Steel production in India and its impact in construction - A review. Journal of Metallurgy and Materials Science, 48 (4). pp. 205-214.

Datta, A K and Das, Goutam and De, P K and Ramachandrarao, P and Mukhopadhyay, M (2006) Finite element modeling of rolling process and optimization of process parameter. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing , 426 (1-2). pp. 11-20.

G

Ghosh, Arindam and Das, S and Chatterjee, S and Ramachandrarao, P (2006) Effect of cooling rate on structure and properties of an ultra-low carbon HSLA-100 grade steel. Materials Characterization, 56 (1). pp. 59-65.

Ghosh, Arindam and Shukla, R and Das, S and Chatterjee, S (2006) The structure and properties of a thermo-mechanically processed low carbon high strength steel. Steel Research International , 77 (4). pp. 276-283.

Ghosh, M and Das, Swapan K and Singh, S R (2006) Investigation of caving-in incident of MIG 21 aircraft. In: National Conference on Failure Analysis – 2006, 22-23 Dec, 2006, Hyderabad.

Ghosh, M and Pramanick, A K and Ghosh Chowdhury, S and Singh, S R (2006) Phase Transformation in Secondary Reaction Zone (SRZ) in Polycrystalline Gas Turbine Blade made of Ni base Superalloy. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh, Sukomal and Kumar, A and Das, Swapan K and Das, Goutam and De, P K and Chakravarty, S (2006) Development of cast Al-Fe-V-Si alloys as a wear resistant and elevated temperature material for applications in engineering industries. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh Chowdhury, S and Dutta, Abhijit and Ravi Kumar, B and Kumar, Amit (2006) Textural evolution during accumulative roll bonding of an Al–Li alloy. Materials Science and Engineering A, 428 (1-2). pp. 351-357.

Ghosh Chowdhury, S and Srivastava, V C and Das, Goutam and De, P K and Das, Swapan K and Swaminathan, J and Mandhyan, Ajay and Singh, S R (2006) Development of High Temperature conductors for Power Transmission Lines. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh Chowdhury, S and Srivastava, V C and Ravi Kumar, B and Soren, S (2006) Evolution of texture during accumulative roll bonding (ARB) and its comparison with normal cold rolled aluminium–manganese alloy. Scripta Materialia, 54 (9). pp. 1691-1696.

Guria, Chandan and Varma, Mohan and Mehrotra, S P and Gupta, Santosh K (2006) Simultaneous optimization of the performance of flotation circuits and their simplification using the jumping gene adaptations of genetic algorithm-II: More complex problems. International Journal of Mineral Processing, 79 (3). pp. 149-166.

J

Jindal, Vikas and De, P K and Venkateswarlu, K (2006) Effect of Al3Sc precipitates on the work hardening behavior of aluminum–scandium alloys. Materials Letters, 60 (28). pp. 3373-3375.

Jindal, Vikas and Srivastava, V C and Das, Arpan and Ghosh, R N (2006) Reactive diffusion in the roll bonded iron–aluminum system. Materials Letters, 60 (13-14). pp. 1758-1761.

Jindal, Vikas and Srivastava, V C and Mishra, Suman K and Das, Goutam and Ghosh, R N (2006) Study of Structural Evaluation and Mechanical properties of IF Steel and Aluminium sheets processed by ARB process. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

K

Kailath, A J and Kumar, Arvind and Mitra, A (2006) Effect of metalloids on crystallization and magnetic behaviour of FeCoSiB based metallic glass. Bulletin of Material Science, 29 (2). pp. 127-131.

Kailath, A J and Panda, A K and Minz, R K and Das, Goutam and Ghosh, M and Kumar, A and Giri, A K and Mahato, B (2006) Synthesis and characterisation of Copper based bulk amorphous/nanophase alloys as melt spun ribbons. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Kar, Abhijit and Mandal, Sudipta and Rathod, S and Ray, Ajoy K (2006) Effect of Ti diffusivity on the formation of phases in the interface of alumina-alumina brazed with 97(Ag40Cu)3Ti filler alloy. Brazing And Soldering, Proceedings . pp. 219-225.

Kumari, S and Panda, A K and Mitra, A and Datta, J and Chattoraj, I (2006) Effect of hydrogen on the magnetic behavior of CoFeCrSiB amorphous. Journal of Materials Science, 41 (17). pp. 5510-5513.

Kundu, Sukumar and Ghosh, M and Chatterjee, S (2006) Diffusion bonding of commercially pure titanium and 17-4 precipitation hardening stainless steel. Materials Science and Engineering A, 428 (1-2). pp. 18-23.

M

Mahere, Vishesh and Nigam, S P (2006) Identification of Isomorphism and Structural Properties of Kinematic chains with the help of Adjacency matrices. Journal of Metallurgy and Materials Science, 48 (1). pp. 31-44.

Mandal, D and Dutta, B K and Panigrahi, S C (2006) Microstructure and mechanical properties of Al–2Mg alloy base short steel fiber reinforced composites prepared by vortex method. Journal of Materials Science, 41 (15). pp. 4764-4770.

Mandal, D and Ghosh, M and Pal, J and De, P K and Das, Goutam and Das, Swapan K and Ghosh Chowdhury, S and Lakra, B A and Ghosh, Sukomal (2006) Development of Cast Austempered Fe-Si-Mn-ME (Microalloying Elements) Steels. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2006) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 14-16, 2006, NML, Jamshedpur.

Mandhyan, Ajay and Chattoraj, I and Mishra, Suman K and De, P K (2006) Study of Hydrogen Permeation Behaviour of High Strength Aluminium Alloys. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Mishra, Suman K and Das, Swapan K and Pathak, L C (2006) Sintering behaviour of self-propagating high temperature synthesised ZrB2–Al2O3 composite powder. Materials Science and Engineering A, 426 (1-2). pp. 229-234.

Mishra, Suman K and Gaur, H and Rupa, P K P and Pathak, L C (2006) Deposition of nanostructured Si–C–N superhard coatings by rf magnetron sputtering. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures , 24 (3). pp. 1311-1317.

Mishra, Suman K and Rupa, P K P and Das, Swapan K and Shcherbakov, V (2006) Effect of alumina diluent on the fabrication of in-situ Al2O3-Ti/ZrB2 composite by self propagating high temperature synthesis dynamic compaction. Metallurgical and Materials Transactions B, 37 (1). pp. 641-647.

Mishra, Suman K and Rupa, P K P and Pathak, L C (2006) Nucleation and growth of DC magnetron sputtered titanium diboride thin films. Surface and Coatings Technology, 200 (12-13). pp. 4078-4081.

Mitra, A and Mohapatra, J N and Panda, A K and Das, A and Narasaiah, N and Jiles, D C (2006) Effect of Plastic Deformation on the Magnetic Properties 304 Stainless Steel During Tensile Loading. In: 9th European NDT Conference (ECNDT-2006), September 25-29, 2006, Berlin.

Mohan, B M and Ghosh, Arpita (2006) The simplest fuzzy PID controllers: mathematical models and stability analysis. Soft Computing - A Fusion of Foundations, Methodologies and Applications, 10 . pp. 961-975.

Mohapatra, J N and Panda, A K and Gunjan, M K and Mitra, A (2006) Evaluation of ageing behavior in modified 9Cr-1Mo steel by magnetic barkhausen emission technique. Journal of Metallurgy and Materials Science, 48 (3). pp. 167-171.

N

Narasaiah, N and Tarafder, S and Ray, K K (2006) Technique for direct measurement of effective fatigue threshold of materials. Materials Science and Technology, 22 (5). pp. 547-552.

Narasimhan, B R V and Rao, D S and Kumar, Rakesh and Alex, T C and Ravi Kumar, B and Das, Swapan K and Srikanth, S and Mehrotra, S P (2006) Mechanochemical Activation of Zircon Sands - A Low Temperature route for Liberation of Zirconia (OLP-0014). Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Nayar, S and Pramanick, A K and Sharma, Binay Kumar and Mishra, Rahul Kumar and Bansal, Satyendra Kumar and Prajapati, Amardeep and Sahu, K K and Das, Swapan K and Pathak, L C and Sinha, Arvind (2006) Hydroxyapatite coating on stainless steel pre-coated with bovine serum albumin at ambient conditions. Colloids and Surfaces B: Biointerfaces, 48 (2). pp. 183-187.

Nayar, S and Sinha, M K and Basu, D and Sinha, Arvind (2006) Synthesis and sintering of biomimetic hydroxyapatite nanoparticles for biomedical applications. Journal of Materials Science: Materials in Medicine, 17 (11). pp. 1063-1068.

P

Pal, S K and Manik, N B and Mitra, A (2006) Dependence of frequency and amplitude of the ac current on the GMI properties of Co based amorphous wires. Materials Science and Engineering A, 415 (1-2). pp. 195-201.

Pal, S K and Manik, N B and Mitra, A (2006) Dependence of the driving current on the harmonic behavior of giant magneto-impedance voltage of Co-based amorphous wires. Journal of Magnetism and Magnetic Materials, 305 (1). pp. 240-246.

Pal, S K and Panda, A K and Vazquez, M and Mitra, A (2006) The effect of magnetoelastic interaction on the GMI behaviour of Fe-, Co- and Co–Fe-based amorphous wires. Journal of Materials Processing Technology, 172 (2). pp. 182-187.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Palit Sagar, S and Ghosh Chowdhury, S and Ravi Kumar, B and De, P K and Parida, N and Ghosh, R N (2006) Crystallographic Texture determination in deformed materials by Ultrasonic Technique. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Panda, A K and Das, Swapan K and Mitra, A and Jiles, D C and Lo, C C H (2006) Evaluation of deformation behavior of HSLA-100 steel using magnetic hysteresis technique. IEEE Transactions on Magnetics, 42 (10). pp. 3264-3266.

Panda, A K and Ghosh Chowdhury, S and Mitra, A and Nishiyama, N (2006) Electron transport behaviour and soft magnetic properties of bulk amorphous Fe72Si4B20Nb4 alloy. Journal of Physics D: Applied Physics, 39 . pp. 3536-3542.

Phuong, To Duy and Bach, Tran Ngoc and Park, Y H and Lee, Z H (2006) Effect of nitrogen and rare earth metals in duplex stain-less steel on transformation of ferrite-austenite structure. Journal of Metallurgy and Materials Science, 48 (1). pp. 13-21.

Poddar, Palash and De, P K and Srivastava, V C and Das, Swapan K and Das, Goutam and Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2006) Development of Rheocasting Facility and Production of Mg - Based Composites. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

R

Rao, V V (2006) A modified gun technique for melt quenching of reactive alloys. Indian Journal Of Engineering And Materials Sciences , 13 (5). pp. 451-454.

Rao, V V (2006) A structural study of copper-43at% cadmium alloy. Indian Journal Of Engineering And Materials Sciences , 13 (6). pp. 531-534.

Ravi Kumar, B and Singh, A K and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2006) Deformation-induced transformation textures in metastable austenitic stainless steel. Materials Science and Engineering A, 429 (1-2). pp. 205-211.

Ravi Kumar, B and Singh, S R and Mahato, B (2006) XRD Residual Stress Analysis of Life-Expired Main Landing Gear of AN-32 Aircraft. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Ray, Ashok K and Das, D K (2006) Accelerated creep resistance of thermal barrier coated superalloy. Materials Letters, 60 (25-26). pp. 3019-3022.

Ray, Ashok K and Goswami, B and Singh, M P and Das, D K and Roy, Nilima and Ravi Kumar, B and Dash, Byomkesh and Ray, Ajoy K and Das, Goutam and Rupa, P K P and Parida, N and Das, Arpan and Swaminathan, J and Dwarakadasa, E S (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. Materials Characterization, 57 (3). pp. 199-209.

Ray, Ashok K and Roy, Nilima and Dash, Byomkesh and Das, D K and Ranganath, V R and Goswami, B and Singh, M P and Tiwari, Y N and Roy, P K and Das, H K and Sanyal, D and Dwarakadasa, E S (2006) High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines. High Temperature Materials And Processes , 25 (3). pp. 109-119.

Ray, Ashok K and Singh, S R and Swaminathan, J and Roy, P K and Tiwari, Y N and Bose, S C and Ghosh, R N (2006) Structure property correlation study of a service exposed first stage turbine blade in a power plant. Materials Science and Engineering A, 419 (1-2). pp. 225-232.

Ray, K K and Narasaiah, N and Tarafder, S (2006) Comparative Assessment of Fatigue-Thresholds Estimated by Short and Long Cracks. In: Fracture of Nano and Engineering Materials and Structures. Proceedings of the 16th European Conference of Fracture, Alexandroupolis, Greece, July 3–7, 2006 (B.). Springer, Netherlands, pp. 221-222. ISBN 978-1-4020-4971-2 (Print) 978-1-4020-4972-9 (Online)

Roy, Rajat K and Das, Siddhartha (2006) New combination of polishing and etching technique for revealing grain structure of an annealed aluminum (AA1235) alloy. New combination of polishing and etching technique for revealing grain structure of an annealed aluminum (AA1235) alloy, 41 . pp. 289-292.

Roy, Rajat K and Kar, Sujoy and Das, Karabi and Das, Siddhartha (2006) A study of precipitation and recrystallization behaviour of aluminium alloy AA1235. A study of precipitation and recrystallization behaviour of aluminium alloy AA1235, 41 . pp. 1039-1045.

S

Sahay, S K and Singh, S K and Goswami, B and Ray, A K (2006) Perspectives of innovation scenarios in Titanium base alloys - A review. Journal of Metallurgy and Materials Science, 48 (4). pp. 181-204.

Sahay, S K and Singh, S K and Goswami, B and Ray, Ashok K (2006) Studies of oxidation behavior in Ti-base alloys. Corrosion Reviews , 24 (5). pp. 353-394.

Sahay, S K and Singh, S K and Kumar, S B and Goswami, B and Ray, A K (2006) Recent developments in cobalt base alloys. Journal of Metallurgy and Materials Science, 48 (3). pp. 129-166.

Sahu, J K and Singh, S R and Das, Samar and Sivaprasad, S and Tarafder, S and Ghosh, R N (2006) Deformation mechanism in a single phase austenitic and ferrito-austenitic stainless steel. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Sahu, Ranjan K (2006) Effect of Mo doping on magnetic and transport properties of La0.5Sr0.5CoO3. Journal of Magnetism and Magnetic Materials, 305 (1). pp. 47-52.

Sahu, Ranjan K and Ray, Ashok K and Das, Swapan K and Kailath, A J and Pathak, L C (2006) Microwave-assisted combustion synthesis of Ni powder using urea. Journal of Materials Research, 21 (7). pp. 1664-1673.

Sawaguchi, Takahiro and Sahu, Puspendu and Kikuchi, Takehiko and Ogawa, Kazuyuki and Kajiwara, Setsuo and Kushibe, Atsumichi and Higashino, Masahiko and Ogawa, Takatoshi (2006) Vibration mitigation by the reversible fcc/hcp martensitic transformation during cyclic tension–compression loading of an Fe–Mn–Si-based shape memory alloy. Scripta Materialia, 54 (11). pp. 1885-1890.

Sen, S and Choudhary, R N P and Tarafder, A and Pramanik, P (2006) Impedance spectroscopy study of strontium modified lead zirconate titanate ceramics. Journal of Applied Physics , 99 (12). pp. 124114-124118.

Singh, S R and Ghosh, M and Das, Swapan K (2006) Metallurgical Analysis of Copper Driving Band of GSH 30 MM HEI (INERT) Aircraft Ammunition of Russian Origin. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Singh, S R and Gunjan, M K and Kumar, Arvind (2006) Failure Analysis of Bolts of Wheel Hub Assembly of AN-32 Aircraft and Comparative Metallurgical Analysis of Russian and Indigenised Bolts. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Sinha, Arvind and Kannde, D (2006) Self-assembly-assisted growth of two-dimensional Penrose tiling. Philosophical Magazine Letters Online ISSN 1362-3036, 86 (2). pp. 75-80.

Siruguri, V and Gutiérrez, J and Barandiaràn, J M and Làzpita, P and Singh, Brajendra and Sahu, Ranjan K and Sundar Manoharan, S and Henry, P and Mondelli, C (2006) Neutron diffraction evidence for double exchange coupling in Ru-substituted La0.6Pb0.4Mn1−xRuxO3, 0x0.5. Physica B: Condensed Matter, 385-386 (1). pp. 408-410.

Sivaprasad, S and Narang, S K and Singh, Raghubir (2006) Failure of high pressure ammonia line in a fertilizer plant – A case study. Engineering Failure Analysis, 13 (6). pp. 867-875.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Tarafder, Mita and Ray, K K (2006) Corrosion fatigue crack growth behaviour of naval steels. Corrosion Science, 48 (8). pp. 1996-2013.

Sridhar, G and Ghosh Chowdhury, S and Singh, S R and Parida , N and Singh, D D N and Das, Swapan K and Roy, P K and Das , Goutam and Gunjan, M K (2006) Failure Analysis of LP Turbine Blade of NTPC-Tanda. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Sridhar, G and Singh, S R and Das, Swapan K (2006) Assessment of Microstructural Degeneration in Base Metal and Coating of Service Exposed IN 738 LC Gas Turbine Blade. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Sridhar, G and Singh, S R and Das, Swapan K and Gunjan, M K (2006) Failure Analysis of Engine Block of 6.2 MW DG set of Hindustan Glass Ltd. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Srinivasan, A and Pillai, U T S and Swaminathan, J and Das, Swapan K and Pal, B C (2006) Observations of microstructural refinement in Mg–Al–Si alloys containing strontium. Journal of Materials Science, 41 (18). pp. 6087-6089.

Srivastava, V C and De, P K and Lakra, B A and Ravi Kumar, B and Pramanick, A K and Das, Goutam (2006) Development of Quasi-crystal Reinforced Aluminium based Metal matrix Composites. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Srivastava, V C and Mishra, Suman K and Das, Goutam and Ghosh, R N (2006) Study of Structural Evaluation and Mechanical properties of IF Steel and Aluminium sheets processes by ARB process. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Swaminathan, J and Singh, Raghubir and Das, Swapan K and Das, Goutam (2006) Failure Analysis of Welded Reformer Tubes of a Fertilizer Unit. In: Proceeding of the International Conference & Exhibition on Pressure Vessels and Piping, 7-9, February 2006, Chennai.

T

Tarafder, Mita and Das, Swapan K and Dash, Byomkesh and Tarafder, S and Chattoraj, I (2006) Fractal Characterisation of Ductile Fracture Surface. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Tarafder, Mita and Dey, Swati and Sivaprasad, S and Tarafder, S (2006) A Novel Technique for Extracting Stretch Zone Features from Fractographs. In: Fracture of Nano and Engineering Materials and Structures. Proceedings of the 16th European Conference of Fracture, Alexandroupolis, Greece, July 3–7, 2006, B. ( 2T3). Springer, Netherlands, pp. 145-146. ISBN 978-1-4020-4971-2 (Print) 978-1-4020-4972-9 (Online)

Tiwari, S K and Mishra, T (2006) Studies on corrosion, physical and chemical properties of CRS bars for their use in Narmada Project Canal. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

V

Venkataraman, R and Das, Goutam and Venkataraman, B and Narashima, Rao and Krishnamurty, R (2006) Image processing and statistical analysis of microstructures of as plasma sprayed Alumina–13 wt.% Titania coatings. Surface and Coatings Technology, 201 (6). pp. 3691-3700.

Venkataraman, R and Parmanick, B and Ravi Kumar, B and Pathak, L C and Das, D K and Venkataraman, B (2006) The influence of substrate on partially rapidly solidified Alumina-3 wt % titania nanocrystalline coatings deposited by plasma spray technique. Surface Engineering for Manufacturing Applications , 890 . pp. 69-75.

Venkataraman, R and Ravi Kumar, B and Krishnamurty, R and Das, D K (2006) A study on phase stability observed in as sprayed Alumina-13 wt.% Titania coatings grown by detonation gun and plasma spraying on low alloy steel substrates. Surface and Coatings Technology, 201 (6). pp. 3087-3095.

Venkateswarlu, K and Das, Goutam and Pramanick, A K and Ray, A K and T, Naveen and Xu, Cheng and Langdon, T G (2006) Microstructure, Tensile Strength of Severely deformed Al-2Si Alloy. In: International Conference on Advanced Materials, 2005, Goa, India.

Venkateswarlu, K and Das, Goutam and Pramanick, A K and Xu, Cheng and Langdon, T G (2006) Using ball-indentation to evaluate the properties of an ultrafine-grained Al–2% Si alloy processed by ECAP. Materials Science and Engineering A, 427 (1-2). pp. 188-194.

Venkateswarlu, K and Mohapatra, S and Rao, R G and Ray, Ajoy K and Pathak, L C and Mondal, D P (2006) High abrasive wear response of diamond reinforced composite coating: a factorial design approach. Tribology Letters, 24 (1). pp. 7-14.

Venkateswarlu, K and Ray, Ajoy K and Gunjan, M K and Mondal, D P and Pathak, L C (2006) Tribological wear behavior of diamond reinforced composite coating. Materials Science and Engineering A, 418 (1-2). pp. 357-363.

This list was generated on Thu Mar 28 22:42:58 2024 IST.