Items where Subject is "Chemical Engineering"

A

Ahuja, P L and Halder, B N and Bhatnagar, S S (1971) Structures of some 17% Cr(Mn, N) stainless steels. Journal of Materials Science, 6 (5). pp. 439-447.

Aman, Noor and Mishra, T (2011) Simultaneous photoreductive removal of copper (II) and selenium (IV) under visible light over spherical binary oxide photocatalyst. Journal of Hazardous Materials, 186 . pp. 360-366.

Aman, Noor and Mishra, T and Sahu, Ranjan K and Tiwari, J P (2010) Facile synthesis of mesoporous N doped zirconium titanium mixed oxide nanomaterial with enhanced photocatalytic activity under visible light. Journal of Materials Chemistry, 20 (48). pp. 10876-10882.

B

Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N (1972) Utilization of zinc ash for production of electrolytic zinc. NML Technical Journal, 14 (3). pp. 102-104.

Bhaskar Raju, G and Latha Priya, D and Latha, Swarna and Parvathy, S and Prabhakar, S (2010) Removal of organics from the waste waters of dyebath by electrooxidation. Asian Journal of Water, Environment and Pollution, 7 (4). pp. 19-23.

Bhaskar Raju, G and Prabhakar, S and Khangaonkar, P R (1988) Studies on the beneficiation of copper oxide minerals. In: XVI International Mineral Processing Congress, June 5-10, 1988, Stockholm.

Bhattacharjee, S (1994) Chemometrics in Analytical Chemistry. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20, 1994, National Metallurgical Laboratory Jamshedpur.

Biswas, P K and Godiwalla, K M and Dev, S C (2004) Physical modelling of particle distribution for stir cast metal matrix composite using sand-water and sand - aqueous CaCl2 slurry system. Journal of Metallurgy and materials Science, 46 (2). pp. 67-93.

Bose, A K (1999) Drying behaviour of alumina gel. NML Technical Journal, 40 (1). pp. 37-41.

C

Chennakesavulu, K and Basariya, M R and Bhaskar Raju, G and Prabhakar, S (2011) Study on thermal decomposition of calix[6]arene and calix[8]arene. Journal of Thermal Analysis and Calorimetry, 103 (3). pp. 853-862.

Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2007) Adsorption of Oleic Acid on Calcium Minerals. In: Mineral Processing Technology- 2007, 22-24 February 2007, Mumbai.

Choudhury, V N (1994) Chemical Phase Analysis. In: Proceedings of the Workshop on Modern Methods of Analysis for Minerals Metals and Pollutants (MMCA 1994), Janurary 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

D

Das, P K and Mishra, D and Anand, S and Das, R P (1999) Reduction of Mn(IV)oxide by (NH4)2 SO3 in the presence of metal ions in ammoniacal medium. Hydrometallurgy, 52 . pp. 91-104.

Datta, A K (2002) Characterization of deformation behavior by load drop phenomena at hot working temperature: A new approach. Journal of Metallurgy and materials Science., 44 (1). pp. 31-37.

Deb, M K and Verma, D and Verma, S K and Bodhankar, N and Sircar, J K (2010) Quantitative analysis of inorganic ions in soil employing diffuse reflectance Fourier transform infrared spectroscopy (DRS-FTIR). Journal of the Indian Chemical Society, 87 (11). pp. 1317-1327.

Dey, A K and Singh, Inder and Altekar, V A (1981) Embrittlement of high carbon steel in sulphuric acid containing thio-compounds. NML Technical Journal, 23 (3-4). pp. 27-31.

Director, NML (2011) Director's Desk - 60th RC Meeting of CSIR-NML. CSIR-National Metallurgy Laboratory, Jamshedpur.

Director, NML (2011) la vintage metallurgie : 60 years of marriage of science to industry. In: la vintage metallurgie. National Metallurgical Laboratory, Jamshedpur, pp. 1-416.

G

Garai, Subhadra and Upadhyay, A K and Sircar, J K (2006) Potassium ion-selective membrane electrode based on heterogeneous precipitate and PVC matrix. Journal of Metallurgy and Materials Science, 48 (2). pp. 103-108.

Ghosh, M K (1978) Applications of solution technique using synthetic standards in spectrochemical analysis. NML Technical Journal, 20 (1-2). pp. 6-14.

Ghosh, M K and Gopalakrishna, S V and Chakrabarti, H K (1971) Spectrographic method of determination of niobium in steel. NML Technical Journal, 13 (4). pp. 100-103.

Govil, P K (1994) X-Ray Fluoresence Spectrometry in Geological Samples. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20,1994, National Metallurgical Laboratory, Jamshedpur.

Gupta, K K (1994) Inductively Coupled Plasma Spectrometer : Applications in Environmental Analysis. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA - 1994), January 18-20,1994, National Metallurgical Laboratory, Jamshedpur.

Gutpa, K K and Bhattacharjee, S and Sekhar, K C (2001) Determination of Gold by Inductively Coupled Plasma Optical Emission Spectrometry. Geological Survey of India, 58 (Suppl). pp. 487-492.

H

Hait, Jhumki and Jana, R K and Kumar, Vinay and Sanyal, S K (2002) Some studies on sulfuric acid leaching of anode slime with additives. Industrial & Engineering Chemistry Research, 41 (25). pp. 6593-6599.

J

Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Review on solvent extraction of cadmium from various solutions. Hydrometallurgy, 111-112 . pp. 1-9.

Jha, Manis K and Lee, Jae-chun and Kumari, Archana and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki (2011) Pressure leaching of metals from waste Printed Circuit Boards using sulphuric acid. Journal of Metals, 63 (8). pp. 29-32.

K

Konar, J and Upadhyay, A K and Pimple, S and Chakravarty, S and Gupta, K K (2007) Analysis of major and minor elements in coal and siliceous materials using microwave digestion and AAS technique. Journal of Metallurgy and Materials Science, 49 (1). pp. 45-50.

Kumar, M (2010) Synthesis, characterization and phase equilibrium of perovskite oxides and development of intermediate temperature solid oxide fuel cells. PhD thesis, University of Madras.

Kumar, Rajendra and Singh, Manjit (1968) A centrifuging technique for studying structure of liquid metals. NML Technical Journal, 10 (2). pp. 24-26.

Kumar, Sushil and Udayabhanu, G and Godiwalla, K M (2003) Chemical composition and mineralogical characterization of fly ash from Bokaro Thermal Power Station, India. Journal of Metallurgy and materials Science., 45 (1). pp. 55-59.

Kumari, Anita and Jana, R K (2011) Comparison of Leaching Rates of Metals in Presence of Different Buffering Agents in Sodium Chloride Media. International Journal of Chemical Engineering Research, 3 (3). pp. 171-179.

Kumari, Anita and Jana, R K (2011) Kinetic Study on Extraction of Valuable Metals in Sodium Chloride Solution with Organic Acid Addition. International Journal of Chemical Engineering Research, 3 (2). pp. 97-105.

M

Mahanty, M S and Dey, T C and Srinivasan, S R and Bhatnagar, P P (1967) Recovery of vanadium from Bayer process liquors, Part I-Utilisation of sodium complex salt. NML Technical Journal, 9 (4). pp. 9-11.

Mahato, D K and Chaudhary, R K and Srivastava, S C (2002) Sintering, microstructureandsome dielectric properties of spray dried PLNZT ceramics. Journal of Metallurgy and materials Science., 44 (2). pp. 103-107.

Maity, Sujata (2003) Study on naturally occurring minerals for the removal of arsenic from groundwater. PhD thesis, National Metallurgical Laboratory (NML) Jamshedpur.

Mathews, C K (1994) Advanced Techiques for Trace Elements Characterisation of Materials. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Mishra, D and Anand, S and Panda, R K and Das, R P (2000) Statistical optimization of conditions for the hydrothermal precipitation of boehmite. Hydrometallurgy, 58 . pp. 169-174.

Mishra, T (2010) Transition Metal Oxide-Pillared Clay Catalyst: Synthesis to Application. In: UNSPECIFIED.

Mishra, T and Mahato, M and Aman, Noor and Patel, J N and Sahu, Ranjan K (2011) A mesoporous WN co-doped titania nanomaterial with enhanced photocatalytic aqueous nitrate removal activity under visible light. Catalysis Science & Technology, 1 (4). pp. 609-615.

Mishra, T and Tiwari, S K and Das, N N and Mahato, B (2003) Synthesis and sorption properties of 13X zeolite derived from coal fly ash. Journal of Metallurgy and materials Science, 45 (4). pp. 193-198.

Mittal, M and Keemti, Lal and Gupta, S P (1979) Dimethyl-2-hydroxyacetophenone oxime as an analytical reagent: Spectrophotometric determination of copper (II), nickel (II), cobalt (II) and palladium (II). NML Technical Journal, 21 (3-4). pp. 37-39.

Mohanta, M K and Ranjan, Ritesh and Srivastava, S C (2002) Chemical analysis of BaSO4 in barite bearing concentrates and beneficiation products by wavelength dispersive X-ray fluorescence spectrometry. Journal of Metallurgy and materials Science., 44 (4). pp. 185-190.

Mohapatra, M and Mishra, D and Anand, S and Das, R P (2000) Aqueous reduction of cobalto-cobaltic oxides in ammoniacal medium using ammonium sulphite as the reductant. Hydrometallurgy . pp. 193-202.

N

Narasimhan, B R V and Prabhakar, S and Hanumantha Rao, K and Manohar, P and Gnanam, F D (2002) Utilization of ferrous leach liquor to synthesize gamma ferric oxide. Scandinavian Journal of Metallurgy , 31 . pp. 201-205.

Narasimhan, B R V and Prabhakar, S and Manohar, P and Gnanam, F D (2002) Synthesis of gamma ferric oxide by direct thermal decomposition of ferrous carbonate. Materials Letters, 52 . pp. 295-300.

Nayar, S and Brahma, Amrita and Barat, Bhaswati and Bhattacharyya, D (2004) UDP-Galactose 4-Epimerase from Kluyveromyces fragilis: analysis of its hysteretic behavior during catalysis. Biochemistry, 43 (31). pp. 10212-10223.

Nguyen, N V and Jeong, Jinki and Jha, Manis K and Lee, Jae-chun and Osseo-Asare, Kwadwo (2010) Comparative studies on the adsorption of Au(III) from waste rinse water of semiconductor industry using various resins. Hydrometallurgy, 105 (1-2). pp. 161-167.

P

Padhi, K K and Biswas, A C and Pandey, L P (1978) Estimation of metallic ferrous and ferric iron. NML Technical Journal, 20 (1-2). pp. 15-19.

Padhi, K K and Pandey, L P (1988) Spectrophotometric determination of vanadium in steel with ammonium aurine tricarboxylate. NML Technical Journal, 30 (1-4). pp. 3-5.

Padhi, K K and Pandey, L P (1980) Spectrophotometric study and its application to metals and non-metals. NML Technical Journal, 22 (1-2). pp. 24-28.

Pande, A M and Sengupta, P L and Dhananjayan, N and Chakrabarti, H K (1970) Thermal reduction of manganese ores with solid fuels: Part I-charcoal. NML Technical Journal, 12 (3). pp. 65-68.

Pandey, L P (1994) Chemical Analysis and Standard Reference Materials. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants-(MMCA 1994), Janurary 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Pandey, L P (1974) Spectrophotometric determination of vanadium by hydroxylamine hydrochlorine. NML Technical Journal, 16 (3-4). pp. 46-48.

Pandey, L P (1981) Use of x-rays in chemical analysis. NML Technical Journal, 23 (3-4). pp. 46-47.

Pandey, L P and Gupta, K K and Jha, S N and Dasgupta, P and Chatterjee, N N (1985) Analytical studies of sea bed polymetallic nodules by atomic absorption spectrophotometry. NML Technical Journal, 27 (1-2). pp. 14-16.

Pandey, V M (1994) Analysis of Uranium in the Uranium Ores of India. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Electrochemical impedance spectroscopy of cashewnut shell liquid coating system. Journal of Metallurgy and materials Science, 45 (2). pp. 97-101.

Prabhakar, S and Bhaskar Raju, G and Khangaonkar, P R (1986) Flotation of sulfide ores uding chelating agents. In: International Symposium on beneficiation and agglomeration, 17-19 December, 1986, Bhubaneswar.

Prabhakar, S and Hanumantha Rao, K and Forsling, Willis (2005) Dissolution of wollastonite and its flotation and surface interactions with tallow-1,3-diaminopropane (duomeen T). Minerals Engineering, 18 . pp. 691-700.

Prabhakar, S and Khangaonkar, P R (1985) Flotation and Adsorption Studies of Chalcopyrite with 8-Hydroxyquinoline. Transactions Indian Institute of Metals, 38 (5). pp. 383-387.

Prabhakar, S and Khangaonkar, P R (1982) Flotation and adsorption studies of chalcopyrite with cupferron. International Journal of Mineral Processing, 9 . pp. 87-95.

R

Rajeev, and Srivastava, S C and Ghosh, M K (1980) X-ray fluorescence analysis of copper-lead-zinc ores. NML Technical Journal, 22 (3-4). pp. 35-40.

Ram, S (1994) Fundamentals of Atomic and Molecular Spectroscopy in Instrumental Analysis. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (January 18-20, 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2011) Beneficiation of Low-Grade Limestone Sample. Mining Science and Technology, 21 . pp. 631-636.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2011) Effectiveness of sodium silicate as gangue depressants in iron ore slimes flotation. International Journal of Minerals, Metallurgy and Materials, 18 ( 5). pp. 515-522.

Reddy, M L P and Sahu, S K and Chakravortty, V (2000) 4-Acylbis(1-Phenyl-3-Methyl-5-Pyrazolones)as extractants for f-elements. Solvent Extraction and Ion Exchange, 18 (6). pp. 1135-1153.

Reddy, M L P and Varma, R L and Ramamohan, T R and Sahu, S K and Chakravortty, V (1998) Cyanex 923 as an extractant for trivalent lanthanides and yttrium. Solvent Extraction and Ion Exchange, 16 (3). pp. 795-812.

S

Saha, A K and Kumar, A and Akerkar, D D and Shahani, M J (1972) Production of iron powder from ferrous chloride by hydrogen reduction. NML Technical Journal, 14 (3). pp. 113-118.

Saha, Jayant K and Mitra, P K and Paul, S and Singh, D D N (2010) Performance of different organic coatings on steel substrate by accelerated and in atmospheric exposure tests. Indian Journal of Chemical Technology, 17 (2). pp. 102-110.

Sahu, S K and Chakravortty, V (1998) Extraction of uranium(VI) with binary mixtures of a quadridentate Schiff base and various neutral donors. Journal of Radioanalytical and Nuclear Chemistry, 227 (1-2). pp. 163-165.

Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2010) A comparative performance of two resins based on polysterene for removal of chromium(III) from tannery solution. In: Environmental Management in Metallurgical Industries, March 15-16, 2010, Banars Hindu University, Varanasi.

Santokh, Singh R and Virdhi, P S (1981) Oxygen enriched hot air blast cupola iron melting. NML Technical Journal, 23 (1-2). pp. 16-19.

Sau, D C and Biswal, K C (2011) Computational fluid dynamics and experimental study of the hydrodynamics of a gas-solid tapered fluidized bed. Applied Mathematical Modelling, 35 (7). pp. 2265-2278.

Sekhar, Chandra K (1994) AAS - A Tool for Monitoring Trace Metals in Environment. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA - 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Singh, B N (1972) Preparation of granular silver catalyst. NML Technical Journal, 14 (4). pp. 127-128.

Singh, D D N (1999) Interrelating electrochemical properties, salt-spray resistance and industrial performance of white-rust controlling passivators for galvanised surfaces. NML Technical Journal, 40 (2). pp. 63-76.

Singh, O N (1994) Industrialization and Pollution. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA-1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Sinha, N and Singh, Ratnakar (2007) Synthesis of quinoline derivatives and substituted homophthalic acids for use in flotation of low grade ores. Journal of Metallurgy and Materials Science, 49 (3). pp. 175-181.

Srivastava, S C and Mishra, Paras Nath and Mahato, D K (2002) Determination of the combined state of atoms of lighter elements with the help of X-ray fluorescence spectrometry. Journal of Metallurgy and materials Science., 44 (1). pp. 51-58.

Srivastava, V C and Shukla, P and Ojha, S N (2001) Microstructural features induced by spray forming process. Journal of Metallurgy and materials Science, 43 (2). pp. 77-91.

Srivastava, Y P (1994) Instrumental Methods of Analysis for the Process and Quality Control in Iron and Steel Industry. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20,1994, National Metallurgical Laboratory, Jamshedpur.

Srivastava , S C (1994) Recent Trends in X-Ray Fluoresence Spectrometry and its Applications in Instrumental Analysis. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA -1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

T

Thakur, P and Chakravarty, S and Maity, S and Bhattacharjee, S and Gupta, K K (2004) A Study on the Adsorption of Cr(VI) on a Synthetically Prepared Zn-Al-Cl Layered Double Hydroxide(LDH). Metals Materials and Processes, 16 (2-3). pp. 339-350.

Trehan, Y N and Sharma, T L (1972) The electrolytic polishing of aluminium and aluminium alloys in a universal perchloric acid-bath. NML Technical Journal, 14 (3). pp. 119-126.

V

Vijaya Kumar , T V and Prabhakar, S and Bhaskar Raju, G (2001) Interaction of Oleate Molecules on Sillimanite and Garnet minerals. In: Advances in surface science and engineering, 21-23 February, 2001, Chennai.

Vijayalakshmi, P and Bhaskar Raju, G and Gnanamani, A (2011) Advanced Oxidation and Electrooxidation As Tertiary Treatment Techniques to Improve the Purity of Tannery Wastewater. Industrial & Engineering Chemistry Research, 50 (17). pp. 10194-10200.

Viswanathan, P V and Mishra, R N and Bhatnagar, P P (1967) Studies on recovery of vanadium from calcium complex vanadate salt. NML Technical Journal, 9 (4). pp. 4-8.