Items where Subject is "Chemical Engineering"

Article

Ahuja, P L and Halder, B N and Bhatnagar, S S (1971) Structures of some 17% Cr(Mn, N) stainless steels. Journal of Materials Science, 6 (5). pp. 439-447.

Aman, Noor and Mishra, T and Sahu, Ranjan K and Tiwari, J P (2010) Facile synthesis of mesoporous N doped zirconium titanium mixed oxide nanomaterial with enhanced photocatalytic activity under visible light. Journal of Materials Chemistry, 20 (48). pp. 10876-10882.

Aman, Noor and Satapathy, P K and Mishra, T and Mahato, M and Das, N N (2012) Synthesis and photocatalytic activity of mesoporous cerium doped TiO2 as visible light sensitive photocatalyst. Material Research Bulletin, 47 . pp. 179-183.

Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N (1972) Utilization of zinc ash for production of electrolytic zinc. NML Technical Journal, 14 (3). pp. 102-104.

Bhaskar Raju, G and Latha Priya, D and Latha, Swarna and Parvathy, S and Prabhakar, S (2010) Removal of organics from the waste waters of dyebath by electrooxidation. Asian Journal of Water, Environment and Pollution, 7 (4). pp. 19-23.

Biswas, P K and Godiwalla, K M and Dev, S C (2004) Physical modelling of particle distribution for stir cast metal matrix composite using sand-water and sand - aqueous CaCl2 slurry system. Journal of Metallurgy and materials Science, 46 (2). pp. 67-93.

Bose, A K (1999) Drying behaviour of alumina gel. NML Technical Journal, 40 (1). pp. 37-41.

Chennakesavulu, K and Basariya, M R and Bhaskar Raju, G and Prabhakar, S (2011) Study on thermal decomposition of calix[6]arene and calix[8]arene. Journal of Thermal Analysis and Calorimetry, 103 (3). pp. 853-862.

Das, P K and Mishra, D and Anand, S and Das, R P (1999) Reduction of Mn(IV)oxide by (NH4)2 SO3 in the presence of metal ions in ammoniacal medium. Hydrometallurgy, 52 . pp. 91-104.

Datta, A K (2002) Characterization of deformation behavior by load drop phenomena at hot working temperature: A new approach. Journal of Metallurgy and materials Science., 44 (1). pp. 31-37.

Deb, M K and Verma, D and Verma, S K and Bodhankar, N and Sircar, J K (2010) Quantitative analysis of inorganic ions in soil employing diffuse reflectance Fourier transform infrared spectroscopy (DRS-FTIR). Journal of the Indian Chemical Society, 87 (11). pp. 1317-1327.

Dey, A K and Singh, Inder and Altekar, V A (1981) Embrittlement of high carbon steel in sulphuric acid containing thio-compounds. NML Technical Journal, 23 (3-4). pp. 27-31.

Garai, Subhadra and Upadhyay, A K and Sircar, J K (2006) Potassium ion-selective membrane electrode based on heterogeneous precipitate and PVC matrix. Journal of Metallurgy and Materials Science, 48 (2). pp. 103-108.

Ghosh, M K (1978) Applications of solution technique using synthetic standards in spectrochemical analysis. NML Technical Journal, 20 (1-2). pp. 6-14.

Ghosh, M K and Gopalakrishna, S V and Chakrabarti, H K (1971) Spectrographic method of determination of niobium in steel. NML Technical Journal, 13 (4). pp. 100-103.

Gutpa, K K and Bhattacharjee, S and Sekhar, K C (2001) Determination of Gold by Inductively Coupled Plasma Optical Emission Spectrometry. Geological Survey of India, 58 (Suppl). pp. 487-492.

Hait, Jhumki and Jana, R K and Kumar, Vinay and Sanyal, S K (2002) Some studies on sulfuric acid leaching of anode slime with additives. Industrial & Engineering Chemistry Research, 41 (25). pp. 6593-6599.

Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Review on solvent extraction of cadmium from various solutions. Hydrometallurgy, 111-112 . pp. 1-9.

Jha, Manis K and Lee, Jae-chun and Kumari, Archana and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki (2011) Pressure leaching of metals from waste Printed Circuit Boards using sulphuric acid. Journal of Metals, 63 (8). pp. 29-32.

Konar, J and Upadhyay, A K and Pimple, S and Chakravarty, S and Gupta, K K (2007) Analysis of major and minor elements in coal and siliceous materials using microwave digestion and AAS technique. Journal of Metallurgy and Materials Science, 49 (1). pp. 45-50.

Kumar, Rajendra and Singh, Manjit (1968) A centrifuging technique for studying structure of liquid metals. NML Technical Journal, 10 (2). pp. 24-26.

Kumar, Sushil and Udayabhanu, G and Godiwalla, K M (2003) Chemical composition and mineralogical characterization of fly ash from Bokaro Thermal Power Station, India. Journal of Metallurgy and materials Science., 45 (1). pp. 55-59.

Kumari, Anita and Jana, R K (2011) Comparison of Leaching Rates of Metals in Presence of Different Buffering Agents in Sodium Chloride Media. International Journal of Chemical Engineering Research, 3 (3). pp. 171-179.

Kumari, Anita and Jana, R K (2011) Kinetic Study on Extraction of Valuable Metals in Sodium Chloride Solution with Organic Acid Addition. International Journal of Chemical Engineering Research, 3 (2). pp. 97-105.

Mahanty, M S and Dey, T C and Srinivasan, S R and Bhatnagar, P P (1967) Recovery of vanadium from Bayer process liquors, Part I-Utilisation of sodium complex salt. NML Technical Journal, 9 (4). pp. 9-11.

Mahato, D K and Chaudhary, R K and Srivastava, S C (2002) Sintering, microstructureandsome dielectric properties of spray dried PLNZT ceramics. Journal of Metallurgy and materials Science., 44 (2). pp. 103-107.

Mishra, D and Anand, S and Panda, R K and Das, R P (2000) Statistical optimization of conditions for the hydrothermal precipitation of boehmite. Hydrometallurgy, 58 . pp. 169-174.

Mishra, T and Mahato, M and Aman, Noor and Patel, J N and Sahu, Ranjan K (2011) A mesoporous WN co-doped titania nanomaterial with enhanced photocatalytic aqueous nitrate removal activity under visible light. Catalysis Science & Technology, 1 (4). pp. 609-615.

Mishra, T and Tiwari, S K and Das, N N and Mahato, B (2003) Synthesis and sorption properties of 13X zeolite derived from coal fly ash. Journal of Metallurgy and materials Science, 45 (4). pp. 193-198.

Mittal, M and Keemti, Lal and Gupta, S P (1979) Dimethyl-2-hydroxyacetophenone oxime as an analytical reagent: Spectrophotometric determination of copper (II), nickel (II), cobalt (II) and palladium (II). NML Technical Journal, 21 (3-4). pp. 37-39.

Mohanta, M K and Ranjan, Ritesh and Srivastava, S C (2002) Chemical analysis of BaSO4 in barite bearing concentrates and beneficiation products by wavelength dispersive X-ray fluorescence spectrometry. Journal of Metallurgy and materials Science., 44 (4). pp. 185-190.

Mohapatra, M and Mishra, D and Anand, S and Das, R P (2000) Aqueous reduction of cobalto-cobaltic oxides in ammoniacal medium using ammonium sulphite as the reductant. Hydrometallurgy . pp. 193-202.

Narasimhan, B R V and Prabhakar, S and Hanumantha Rao, K and Manohar, P and Gnanam, F D (2002) Utilization of ferrous leach liquor to synthesize gamma ferric oxide. Scandinavian Journal of Metallurgy , 31 . pp. 201-205.

Narasimhan, B R V and Prabhakar, S and Manohar, P and Gnanam, F D (2002) Synthesis of gamma ferric oxide by direct thermal decomposition of ferrous carbonate. Materials Letters, 52 . pp. 295-300.

Nayar, S and Brahma, Amrita and Barat, Bhaswati and Bhattacharyya, D (2004) UDP-Galactose 4-Epimerase from Kluyveromyces fragilis: analysis of its hysteretic behavior during catalysis. Biochemistry, 43 (31). pp. 10212-10223.

Nguyen, N V and Jeong, Jinki and Jha, Manis K and Lee, Jae-chun and Osseo-Asare, Kwadwo (2010) Comparative studies on the adsorption of Au(III) from waste rinse water of semiconductor industry using various resins. Hydrometallurgy, 105 (1-2). pp. 161-167.

Padhi, K K and Biswas, A C and Pandey, L P (1978) Estimation of metallic ferrous and ferric iron. NML Technical Journal, 20 (1-2). pp. 15-19.

Padhi, K K and Pandey, L P (1988) Spectrophotometric determination of vanadium in steel with ammonium aurine tricarboxylate. NML Technical Journal, 30 (1-4). pp. 3-5.

Padhi, K K and Pandey, L P (1980) Spectrophotometric study and its application to metals and non-metals. NML Technical Journal, 22 (1-2). pp. 24-28.

Pande, A M and Sengupta, P L and Dhananjayan, N and Chakrabarti, H K (1970) Thermal reduction of manganese ores with solid fuels: Part I-charcoal. NML Technical Journal, 12 (3). pp. 65-68.

Pandey, L P (1974) Spectrophotometric determination of vanadium by hydroxylamine hydrochlorine. NML Technical Journal, 16 (3-4). pp. 46-48.

Pandey, L P (1981) Use of x-rays in chemical analysis. NML Technical Journal, 23 (3-4). pp. 46-47.

Pandey, L P and Gupta, K K and Jha, S N and Dasgupta, P and Chatterjee, N N (1985) Analytical studies of sea bed polymetallic nodules by atomic absorption spectrophotometry. NML Technical Journal, 27 (1-2). pp. 14-16.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Electrochemical impedance spectroscopy of cashewnut shell liquid coating system. Journal of Metallurgy and materials Science, 45 (2). pp. 97-101.

Prabhakar, S and Hanumantha Rao, K and Forsling, Willis (2005) Dissolution of wollastonite and its flotation and surface interactions with tallow-1,3-diaminopropane (duomeen T). Minerals Engineering, 18 . pp. 691-700.

Prabhakar, S and Khangaonkar, P R (1985) Flotation and Adsorption Studies of Chalcopyrite with 8-Hydroxyquinoline. Transactions Indian Institute of Metals, 38 (5). pp. 383-387.

Prabhakar, S and Khangaonkar, P R (1982) Flotation and adsorption studies of chalcopyrite with cupferron. International Journal of Mineral Processing, 9 . pp. 87-95.

Rajeev, and Srivastava, S C and Ghosh, M K (1980) X-ray fluorescence analysis of copper-lead-zinc ores. NML Technical Journal, 22 (3-4). pp. 35-40.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2011) Beneficiation of Low-Grade Limestone Sample. Mining Science and Technology, 21 . pp. 631-636.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2011) Effectiveness of sodium silicate as gangue depressants in iron ore slimes flotation. International Journal of Minerals, Metallurgy and Materials, 18 ( 5). pp. 515-522.

Reddy, M L P and Sahu, S K and Chakravortty, V (2000) 4-Acylbis(1-Phenyl-3-Methyl-5-Pyrazolones)as extractants for f-elements. Solvent Extraction and Ion Exchange, 18 (6). pp. 1135-1153.

Reddy, M L P and Varma, R L and Ramamohan, T R and Sahu, S K and Chakravortty, V (1998) Cyanex 923 as an extractant for trivalent lanthanides and yttrium. Solvent Extraction and Ion Exchange, 16 (3). pp. 795-812.

Saha, A K and Kumar, A and Akerkar, D D and Shahani, M J (1972) Production of iron powder from ferrous chloride by hydrogen reduction. NML Technical Journal, 14 (3). pp. 113-118.

Saha, Jayant K and Mitra, P K and Paul, S and Singh, D D N (2010) Performance of different organic coatings on steel substrate by accelerated and in atmospheric exposure tests. Indian Journal of Chemical Technology, 17 (2). pp. 102-110.

Sahu, S K and Chakravortty, V (1998) Extraction of uranium(VI) with binary mixtures of a quadridentate Schiff base and various neutral donors. Journal of Radioanalytical and Nuclear Chemistry, 227 (1-2). pp. 163-165.

Santokh, Singh R and Virdhi, P S (1981) Oxygen enriched hot air blast cupola iron melting. NML Technical Journal, 23 (1-2). pp. 16-19.

Sau, D C and Biswal, K C (2011) Computational fluid dynamics and experimental study of the hydrodynamics of a gas-solid tapered fluidized bed. Applied Mathematical Modelling, 35 (7). pp. 2265-2278.

Singh, B N (1972) Preparation of granular silver catalyst. NML Technical Journal, 14 (4). pp. 127-128.

Singh, D D N (1999) Interrelating electrochemical properties, salt-spray resistance and industrial performance of white-rust controlling passivators for galvanised surfaces. NML Technical Journal, 40 (2). pp. 63-76.

Sinha, N and Singh, Ratnakar (2007) Synthesis of quinoline derivatives and substituted homophthalic acids for use in flotation of low grade ores. Journal of Metallurgy and Materials Science, 49 (3). pp. 175-181.

Srivastava, S C and Godiwalla, K M and Das, A N and Pandey, L P (1994) Particle size effect on X-ray fluorescence intensity in some binary mixtures. NML Technical Journal, 36 (1). pp. 11-17.

Srivastava, S C and Mishra, Paras Nath and Mahato, D K (2002) Determination of the combined state of atoms of lighter elements with the help of X-ray fluorescence spectrometry. Journal of Metallurgy and materials Science., 44 (1). pp. 51-58.

Srivastava, V C and Shukla, P and Ojha, S N (2001) Microstructural features induced by spray forming process. Journal of Metallurgy and materials Science, 43 (2). pp. 77-91.

Thakur, P and Chakravarty, S and Maity, S and Bhattacharjee, S and Gupta, K K (2004) A Study on the Adsorption of Cr(VI) on a Synthetically Prepared Zn-Al-Cl Layered Double Hydroxide(LDH). Metals Materials and Processes, 16 (2-3). pp. 339-350.

Trehan, Y N and Sharma, T L (1972) The electrolytic polishing of aluminium and aluminium alloys in a universal perchloric acid-bath. NML Technical Journal, 14 (3). pp. 119-126.

Vijayalakshmi, P and Bhaskar Raju, G and Gnanamani, A (2011) Advanced Oxidation and Electrooxidation As Tertiary Treatment Techniques to Improve the Purity of Tannery Wastewater. Industrial & Engineering Chemistry Research, 50 (17). pp. 10194-10200.

Viswanathan, P V and Mishra, R N and Bhatnagar, P P (1967) Studies on recovery of vanadium from calcium complex vanadate salt. NML Technical Journal, 9 (4). pp. 4-8.

Book or NML Publication

Director, NML (2011) la vintage metallurgie : 60 years of marriage of science to industry. In: la vintage metallurgie. National Metallurgical Laboratory, Jamshedpur, pp. 1-416.

Conference or Workshop Item

Bhaskar Raju, G and Prabhakar, S and Khangaonkar, P R (1988) Studies on the beneficiation of copper oxide minerals. In: XVI International Mineral Processing Congress, June 5-10, 1988, Stockholm.

Bhattacharjee, S (1994) Chemometrics in Analytical Chemistry. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20, 1994, National Metallurgical Laboratory Jamshedpur.

Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2007) Adsorption of Oleic Acid on Calcium Minerals. In: Mineral Processing Technology- 2007, 22-24 February 2007, Mumbai.

Choudhury, V N (1994) Chemical Phase Analysis. In: Proceedings of the Workshop on Modern Methods of Analysis for Minerals Metals and Pollutants (MMCA 1994), Janurary 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Govil, P K (1994) X-Ray Fluoresence Spectrometry in Geological Samples. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20,1994, National Metallurgical Laboratory, Jamshedpur.

Gupta, K K (1994) Inductively Coupled Plasma Spectrometer : Applications in Environmental Analysis. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA - 1994), January 18-20,1994, National Metallurgical Laboratory, Jamshedpur.

Mathews, C K (1994) Advanced Techiques for Trace Elements Characterisation of Materials. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Mishra, T (2010) Transition Metal Oxide-Pillared Clay Catalyst: Synthesis to Application. In: UNSPECIFIED.

Pandey, L P (1994) Chemical Analysis and Standard Reference Materials. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants-(MMCA 1994), Janurary 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Pandey, V M (1994) Analysis of Uranium in the Uranium Ores of India. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Prabhakar, S and Bhaskar Raju, G and Khangaonkar, P R (1986) Flotation of sulfide ores uding chelating agents. In: International Symposium on beneficiation and agglomeration, 17-19 December, 1986, Bhubaneswar.

Ram, S (1994) Fundamentals of Atomic and Molecular Spectroscopy in Instrumental Analysis. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (January 18-20, 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2010) A comparative performance of two resins based on polysterene for removal of chromium(III) from tannery solution. In: Environmental Management in Metallurgical Industries, March 15-16, 2010, Banars Hindu University, Varanasi.

Sekhar, Chandra K (1994) AAS - A Tool for Monitoring Trace Metals in Environment. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA - 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Singh, O N (1994) Industrialization and Pollution. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA-1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Srivastava, Y P (1994) Instrumental Methods of Analysis for the Process and Quality Control in Iron and Steel Industry. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20,1994, National Metallurgical Laboratory, Jamshedpur.

Srivastava , S C (1994) Recent Trends in X-Ray Fluoresence Spectrometry and its Applications in Instrumental Analysis. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA -1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur.

Vijaya Kumar , T V and Prabhakar, S and Bhaskar Raju, G (2001) Interaction of Oleate Molecules on Sillimanite and Garnet minerals. In: Advances in surface science and engineering, 21-23 February, 2001, Chennai.

Other

Director, NML (2011) Director's Desk - 60th RC Meeting of CSIR-NML. CSIR-National Metallurgy Laboratory, Jamshedpur.

Thesis

Kumar, M (2010) Synthesis, characterization and phase equilibrium of perovskite oxides and development of intermediate temperature solid oxide fuel cells. PhD thesis, University of Madras.

Maity, Sujata (2003) Study on naturally occurring minerals for the removal of arsenic from groundwater. PhD thesis, National Metallurgical Laboratory (NML) Jamshedpur.