Items where Year is 2017

A

Abhilash, and Meshram, Pratima and Sarkar, Supriyo and Venugopalan, T (2017) Exploring Blast Furnace Slag As A Secondary Resource For Extraction Of Rare Earth Elements. Minerals & Metallurgical Processing Journal, 34(4) (IF-0.692). pp. 178-182.

Adeleke, A A and Kanna, M Barath and Kolawole, J Odusote and Malathi, M and Ajani, O Lasode and Paswan, Dayanand (2017) Influence of binder composition on briquetting of coal slacks. In: Influence of binder composition on briquetting of coal slacks, Dec 2017, IIT Kanpur.

Agarwal, Sanjay and Kim, Hong-In and Park, Kyung-Ho and Lee, Jin-Young (2017) Monazite Mineral Processing. In: Mineral Processing Methods, Applications and Technology, Geology and Mineralogy Research Development. Nova Science Publishers, Inc. New York, USA, NEW YORK, USA, pp. 39-56. ISBN 978-1-53612-893-2 (eBook)

Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2017) c. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151.

Al-Negheimish, Abdulaziz and Alhozaimy , Abdulrahman and Hussain, R R and Singh, J K and Singh, D D N (2017) Pitting Susceptibility of Concrete Reinforcing Steel Bars Having Manganese Sulfide Inclusions. ACI Materials Journal, 114(3) (IF-1.183). pp. 441-451.

Alex, T C and Kumar, Rakesh (2017) Surface and bulk activation of a siliceous bauxite during attrition milling. International Journal of Mineral Processing, 160 (IF-1.518). pp. 32-38.

Ammasi, A and Pal, J (2017) Influences of carbonaceous materials on the quality of hematite ore pellets. In: The 3rd International Conference on Science and Technology of Ironmaking and Steelmaking (STIS-2017), Dec 11-13,2017, IIT Kanpur.

Anjaneyulu, Ch and Murty, B S (2017) Soft magnetic properties of Fe-based bulk metallic glass system containing niobium and copper. Journal of Metallurgy and Materials Science, 59(3) . pp. 103-110.

Ashiq, Md and Pushkar, Dhekne and Hamada, Atef Saad and Sahu, Puspendu and Mahato, B and Minz, R K and Ghosh Chowdhury, S and Karjalainen, L P (2017) Correlation of Microstructure and Texture in a Two-Phase High-Mn Twinning-Induced Plasticity Steel During Cold Rolling. Metallurgical and Materials Transactions A, 48(10) (I F-1.874). pp. 4842-4856.

Ashok, K and Sankar, P and Maruthupandian, K (2017) Process evaluation of AOD stainless steel making in Salem Steel Plant, SAIL. Journal of Metallurgy and Materials Science, 59(4) . pp. 173-180.

B

Bandyopadhyay, D and Sau, D C (2017) Low temperature reduction of iron oxide fines. In: Proceedings of 3rd International Conference on Science and Technology of Ironmaking and Steelmaking’ , 11-13th December , 2017, IIT, Kanpur.

Bansal, Rajesh and Singh, J K and Singh, Vakil and Singh, S D and Das, Parimal (2017) Optimization of Oxidation Temperature for Commercially Pure Titanium to Achieve Improved Corrosion Resistance. Journal Of Materials Engineering And Performance, 26(3) (IF-1.331). pp. 969-977.

Baral, J and Swaminathan, J and Chakrabarti, D and Ghosh, R N (2017) Effect of welding on creep damage evolution in P91B steel. Journal of Nuclear Materials, 490 (IF-2.048). pp. 333-343.

Bhattacharjee, G and Kushwaha, O S and Kumar, A and Khan, M Y and Patel, J N and Kumar, Rajneesh (2017) Effects of Micellization on Growth Kinetics of Methane Hydrate. Industrial & Engineering Chemistry Research, 56(13) (IF-2.843). pp. 3687-3698.

Bhattacharya, S and Jyoti, Divya and Sahu, L and Dey, Shobhana and Singh, H (2017) Flotation of Low Volatile Coking Coal Fines. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 421-432.

Bhowmick, T and Nayak, B and Verma, A K (2017) Chemical and mineralogical composition of Kathara Coal, East Bokaro Coalfield, India. Fuel , 208 (IF-4.601). pp. 91-100.

C

Chakrabarty, A K and Khutia, N and Bar, H N and Dey, P P and Sivaprasad, S (2017) Effect of Loading Variations on Damage of SA333 C-Mn Steel. Materials Today: Proceedings, 4(2) Part A . pp. 415-423.

Chidambaram, S and Kamaraj, A (2017) Failure investigation of an industrial crankshaft made of ductile iron. Advances in natural and applied sciences, 11(8) . pp. 25-30.

Chidambaram, S and Kamaraj, A (2017) Failure investigation of an industrial crank shaft pin. Advances in Natural and Applied Sciences . pp. 1-7.

Chintala, Rajesh and Rath, R K and Kumar, Anil (2017) Effective Utilization of Fly Ash, Iron Ore Slime and LD-Slag in Geopolymer Mortar. Recent Trends in Civil Engineering & Technology, 7(1) . pp. 9-16.

Choudhary, B N and Vaish, A K and Roy, B N (2017) Innovation for the production of value added products from sponge iron fines (waste) by simulation of rotary kiln-submerged arc furnace route. Journal of Metallurgy and Materials Science, 59(3) . pp. 127-131.

D

Das, Anindya and Ghosh, M and Tarafder, S and Chakrabarti, D (2017) Micromechanisms of deformation in dual phase steels at high strain rates. Material Science and Engineering A Structural Materials Properties Microstructure and Processing, 680 (IF-3.094). pp. 249-258.

Das, Arpan (2017) Grain boundary engineering: fatigue fracture. Philosophical Magazine, 97(11) (IF-1.505). pp. 867-916.

Das, Arpan (2017) Resurgence of texture in cyclically deformed austenite. Materials Characterization, 123 (IF 2.714). pp. 315-327.

Das, Sanjeev and Prasad, Ranjit and Singh, R P and Abhilash, (2017) Physical, Mechanical and Metallurgical Characteristics of Banded Hematite Jasper of Ghatkuri (Gua), Jharkhand. Journal of Geological Society of India, 90(5) (IF-0.479). pp. 623-627.

Datta, A K and Sivaprasad, S and Prasad, P (2017) Free vibration analysis and shape optimization of offshore tubular structures. Journal of Metallurgy and Materials Science, 59(3) . pp. 133-141.

Dey, Shobhana and Mohanta, M K and Singh, Ratnakar (2017) Mineralogy and textural impact on beneficiation of goethitic ore. International Journal of Mining Science and Technology, 27(3) (IF-1.383). pp. 445-450.

Dey, Sushmita and Roy, Rajat K and Ghosh, M and Mallick, A Basu and Mitra, A and Panda, A K (2017) Enhancement in magnetocaloric properties of NiMnGa alloy through stoichiometric tuned phase transformation and magneto-thermal transitions. Journal of Magnetism and Magnetic Materials, 439 (IF-2.630). pp. 305-311.

Director, NML (2017) Annual Report 2016-2017. CSIR- National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2017) Director's Desk - 70th RC Meeting of CSIR-NML (English Version). CSIR- National Metallurgical Laboratory, Jamshedpur.

Divya, Nangunoori and Devender, V (2017) Mechanical behaviour of banana flax fiber reinforced soy resin composites. Journal of Metallurgy and Materials Science, 59(3) . pp. 111-116.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, S (2017) Volcanic ash-based geopolymer cements/concretes: the current state of the art and perspectives. Environmental Science and Pollution Research, 24(5) (IF-2.741). pp. 4433-4446.

Dwivedi, Deepak and Randhawa, N S and Saroj, Sanjay and Jana, Ranjeet Kumar (2017) An Overview of Manganese Recovery by Hydro and Pyro-Metallurgical Routes. Journal of The Institution of Engineers (India): Series D, 98(1) . pp. 147-154.

G

Gaurav, G and Murtaza, Q and Yuvraj, N and Mandal, D and Sahoo, K L and Murmu, L (2017) Synthesis and effect of Misch metal on mechanical properties of conventional cast Mg-Al-Zn-Sn-Pb alloy system. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231(7) (IF-1.625).

Ghorai, S and Mandal, G K and Roy, S and Minj, R K and Agarwal, Anup and Singh, D P and Kumar, A and Ramna, R B V (2017) Treatment of LF slag to prevent powdering during cooling. Journal of Mining and Metallurgy Section B- Metallurgy , 53(2)B (IF-0.804). pp. 123-130.

Ghosh, M and Bansal, Gourav and Chandan, A and Shah, Minal and Tripathy, S and Murugaiyan, Premkumar and Sahoo, Biraj and Mukherjee, K and Srivastava, V C and Ghosh Chowdhury, S (2017) Functionally Driven Steels: A Review. Steel Tech, 12(1) (NonSCI). pp. 13-36.

Goudar, D M and Srivastava, V C and Rudrakshi, G B (2017) Effect of Atomization Parameters on Size and Morphology of Al-17Si Alloy Powder Produced by Free Fall Atomizer. Engineering Journal, 21(1) (IF-0.384). pp. 155-168.

Guguloth, K and Roy, Nilima (2017) Creep deformation behavior of 9Cr1MoVNb (ASME Grade 91) steel. Materials Science and Engineering A, 680 (IF-3.094). pp. 388-404.

Guguloth, K and Swaminathan, J and Roy, Nilima and Ghosh, R N (2017) Uniaxial creep and stress relaxation behavior of modified 9Cr-1Mo steel. Materials Science and Engineering A- Structural Materials Properties Micro-structure and Processing, 684 (IF-3.094). pp. 683-696.

H

Hazra, A and Hossain, S M and Pramanick, A K and Ray, M (2017) Gold-silver nanostructures: Plasmon-plasmon interaction. Vacuum, 146 (IF- 1.530). pp. 437-443.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2017) An adaptive neuro-fuzzy inference systembased modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking, 44(9) (IF-0.985). pp. 656-665.

Husain, M M and Sarkar, R and Pal, T K and Ghosh, M and Prabhu, N (2017) Quantification of Microtexture at Weld Nugget of Friction Stir-Welded Carbon Steel. Journal of Materials Engineering and Performance , 26(5) (IF-1.331). pp. 2047-2056.

J

Jafri, M W and Rath, R K and Dey, Shobhana and Sharma, Mamta and Singh, Ratnakar (2017) Studies on ash reduction of a non-coking coal sample by froth flotation. In: International Conference on Mineral Processing Technology (MPT-2017), 2017, Mahabalipuram, Chennai.

Jena, P S M and Rai, R K and Roy, P K and Sahu, J K (2017) Role of internal oxidation and iron penta carbonyl formation on creep life of 9Cr-1Mo steel. Materials at high temperatures, 34(4) (IF-0.0802). pp. 239-249.

Jena, P S M and Rai, R K and Sahu, J K (2017) Improvement of toughness of high chromium white cast iron: duplex ferritic-austenitic matrix. Materials Science and Technology, 34(3) (IF-2.764). pp. 299-304.

Joseph, O O and Sivaprasad, S and Fayomi, O S I (2017) Comparative study on the effect of NaNO2 in corrosion inhibition of micro-alloyed and API-5L X65 steels in E20 simulated FGE. Energy Procedia, 119 . pp. 953-960.

Joshi, Akashy J and Singh, Rajkumar P and Hosmani, Santosh S (2017) Microstructure evolution in boronized inconel 718 superalloy. Journal of Metallurgy and Materials Science, 59(1) . pp. 11-21.

K

Kamaraj, A and Hore, S and Sathyamoorth, P (2017) Estimation and Analysis of Excess Oxygen Input into Ladle During Liquid Steel Tapping. Transactions of the Indian Institute of Metals, 70(9) (IF-0.533). pp. 2465-2476.

Kamaraj, A and Mandal, G K and Minj, R K and Misra, S and Bandyopadhyay, D (2017) Characterization and Evolution of Non-metallic Inclusions in Fe–Al–Si–O System. Transactions of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1887-1899.

Kanta, P Laxman Mani and Srivastava, V C and Venkateswarlu, K and Paswan, S and Mahato, B and Das, Goutam and Sivaprasad, K and Krishna, K Gopala (2017) Corrosion behavior of ultrafine-grained AA2024 aluminum alloy produced by cryorolling. International Journal of Minerals, Metallurgy, and Materials, 24(11) (IF- 0.943). pp. 1293-1305.

Keekan, Kishore and Jalondharaa, J Chhaganbhai and Abhilash, (2017) Extraction of Ce and Th from Monazite Using REE Tolerant Aspergillus niger. Mineral Processing and Extractive Metallurgy Review, 38(5) (IF-1.219). pp. 312-320.

Kisku, Nicky and Sau, D C (2017) Recovery of Tungsten and Copper from Waste Tungsten Copper Borings. Journal of Materials & Metallurgical Engineering, 7(1) (Non-SCI). pp. 1-8.

Krishna, K Gopala and Das, Goutam and Venkateswarlu, K and Kumar, K C Hari (2017) Studies on Aging and Corrosion Properties of Cryorolled Al–Zn–Mg–Cu (AA7075) Alloy. Transactions of the Indian Institute of Metals, 70(3) (IF-0.533). pp. 817-825.

Kumar, Krishna (2017) Scope Of Distillation in Extraction,Purification & Recycling of Strategic Metals- a review. International conference on Non-ferrous Minerals & Metals - 2017 . pp. 65-72.

Kumar, Nitesh and Kumar, Binay and Pathak, L C (2017) Effect of shapes and compositions of spark plasma sintered ZrB -C composites on performance as EDM 2 tools. Journal of Metallurgy and Materials Science, 59(4) . pp. 143-152.

Kumar, P and Kumar, Rakesh and Rai, B and Subramanian, S and Srikanth, S (2017) Preface. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 251-252.

Kumar, P and Mondal, A K and Ghosh Chowdhury, S and Krishna, G and Ray, A K (2017) Influence of additions of Sb and/or Sr on microstructure and tensile creep behaviour of squeeze-cast AZ91D Mg alloy. Materials Science and Engineering A-Structural Materials Properties Micro-structure and Processing, 683 (IF-3.094). pp. 37-45.

Kumar, Rakesh (2017) Characterisation of Minerals and Ores: On the Complementary Nature of Select Techniques and Beyond. Transactions of the Indian Institute of Metals, 70(2) (IF- 0.533). pp. 253-277.

Kumar, Sanjay and Mucsi, G and Kristaly, Ferenc and Pekker, P (2017) Mechanical activation of fly ash and its influence on micro and nano-structural behaviour of resulting geopolymers. Advanced Powder Technology, 28(3) (IF-2.659). pp. 805-813.

Kumar, Sunil (2017) Effect of applied force and atomic organization of copper on its adhesion to a graphene substrate. RSC Advances, 7(40) (IF-3.108). pp. 25118-25131.

Kumar, Sunil (2017) Graphene engendered 2-D structural morphology of aluminium atoms: Molecular dynamics simulation study. Materials Chemistry and Physics, 202 (2.084). pp. 329-339.

Kumar, Sunil and Das, Suchandan K (2017) A triaxial tensile deformation-induced nanoporous structure of aluminium: estimation of surface area, solid volume, and dimensionless aspect ratio. Physical chemistry chemical physics, 19(31) (IF-4.123). pp. 21024-21032.

Kumar, Sunil and Srivastava, V C and Mandal, G K and Pattanayek, S K