Items where Year is 2003

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | G | K | M | N | P | R | S | T | U | V
Number of items: 142.

A

Agrawal, A and Sahu, K K and Rawat, J P (2003) Kinetic studies on the exchange of bivalent metal ions on amberlite IRC-718-an iminodiacetate resin. Solvent Extraction and Ion Exchange, 21 (5). pp. 763-782.

B

Bahadur, Aruna (2003) Enhancement of high temperature strength and room temperature ductility of iron aluminides by alloying. Materials Science and Technology, 19 (12). pp. 1627-1634.

Bahadur, Aruna and Ravi Kumar, B and Ghosh Chowdhury, S (2003) Effect of Thermomechanical Treatment on X-Ray Elastic Constants and Residual Stresses in HSLA-100 Steel. Journal of Nondestructive Evaluation, 22 (2). pp. 53-62.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2003) Electroless Ni–P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.

Bandyopadhyay, D and Singh, S D and Sanyal, D and Singh, K N (2003) A study on dissolution kinetics of carbon in liquid iron bath. Chemical Engineering Journal, 94 (2). pp. 79-92.

Bhagat, A N and Ranganathan, S and Mohanty, O N (2003) Electrical resistivity studies in low carbon and HSLA-100 steels. Materials Science and Technology, 19 (3). pp. 343-346.

Bhattacharjee, S and Bhattacharyya, G and Mitra, A (2003) Chronological development of heavy metal accumulation research in earthworms - A review. Journal of Metallurgy and materials Science, 45 (1). pp. 19-37.

Bhattacharjee, S and Chakravarty, S and Maity, S and Kar, S and Thakur, P and Bhattacharyya, G (2003) Removal of lead from contaminated water bodies using sea nodule as an adsorbent. Water Research, 37 (16). pp. 3954-3966.

Bhattacharya, D K (2003) NDT for residual life assessment in Indian industry. Insight, 45 (1). pp. 31-40.

Biswas, D K and Ashana, S R and Rau, V G (2003) Some studies on energy savings in sponge iron plants. Journal Of Energy Resources Technology-Transactions Of The, 125 (3). pp. 228-237.

Biswas, D K and Goswami, N G (2003) Technology Evaluation : Experience and Few Case Studies. In: UNSPECIFIED.

C

Chakrabarti, D M (2003) Customer Feedback in R&D Business. In: UNSPECIFIED.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2003) Kinetics of reduction of chromium in chromite ore. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 335-339.

Chakraborty, J and Das, Swapan K and Rao, Venkatesh and Sinha, Arvind (2003) Behaviour of iron ion in the morphosynthesis of magnetite particles. Materials Transactions , 44 (6). pp. 1124-1127.

Chattaraj, Mousumi and Sahoo, K L and Singh, H P and Ghosh, Sukomal (2003) Studies on the Potentiality of Kusum Oil (Schleichera Oleosa) as a Core and Mould Binder for Foundry Applications. Indian Foundry Journal, 49(4) . pp. 25-28.

Chatterjee, Kakali (2003) Rural Markets for Technologies - Present Indian Scenario. In: UNSPECIFIED.

Chattoraj, I and Kumar, A and Das, Swapan K and Tarafder, Mita and Tarafder, S (2003) Factors influencing the extent of hydrogenenhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. Zeitschrift Fur Metallkunde , 94 (11). pp. 1228-1233.

Chattoraj, I and Tarafder, Mita and Das, Swapan K and Tarafder, S (2003) Hydrogen induced brittle crack growth in Cu-strengthened HSLA-100 steels. Materials Science and Engineering A, 339 (1-2). pp. 136-149.

Chaudhary, P N (2003) Transfer of know-how, the need for a holistic approach. In: UNSPECIFIED.

Chaudhary, S K (2003) An innovative solution for deterioration of railway track. Journal of Metallurgy and Materials Science . pp. 45-53.

D

Das, Goutam and Ghosh, Sabita and Sahay, S K and Ranganath, V R and Vaze, K K (2003) Development and validation of ball indentation technique to evaluate the mechanical properties of materials. Transactions Of The Indian Institute Of Metals , 56 (5). pp. 465-475.

Das, Goutam and Ghosh, Sukomal and Ghosh Chowdhury, S and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Investigation of sub-surface cracks in continuous cast billets. Engineering Failure Analysis, 10 (3). pp. 363-370.

Das, Goutam and Ghosh Chowdhury, S and Ray, Ashok K and Das, Swapan K and Bhattacharya, D K (2003) Turbine blade failure in a thermal power plant. Engineering Failure Analysis, 10 (1). pp. 85-91.

Das, Goutam and Ray, Ashok K and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Fatigue failure of a boiler feed pump rotor shaft. Engineering Failure Analysis, 10 (6). pp. 725-732.

Das, N N and Dash, A and Brahama, G S and Mohapatra, P (2003) Synthesis, characterisation and dissociation of a glycinate bridged trinuclear Co(III)-Cu(II)-Co(III) complex. Inorganic Reaction Mechanisms , 5 (1). pp. 73-77.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) The effect of cooling rate on structure and properties of a HSLA forging. Scripta Materialia, 48 (1). pp. 51-57.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) Microstructural characterization of controlled forged HSLA-80 steel by transmission electron microscopy. Materials Characterization, 50 (4-5). pp. 305-315.

Das, Suchandan K (2003) Transport phenomena and process modelling issues in mineral processing operations. Transactions Of The Indian Institute Of Metals , 56 (3). pp. 269-279.

Das, Suchandan K and Godiwalla, K M (2003) Phase-field approach - A paradigm shift in metallurgical solidification modelling. Indian Foundry Journal, 49 (7). pp. 17-22.

Das, Swapan K and Bhattacharya, D K (2003) Corrosion failure of Zn–Al detonator housing. Engineering Failure Analysis, 10 (6). pp. 639-643.

De, P K and Paul, K K and Ghosh Chowdhury, S (2003) Development of Materials and Processing Technology for Rural Blacksmiths : A Package. In: Proceedings of the International Seminar on Downsizing Technology for Rural Development - Vol II, October 7-9, 2003, RRL Bhubaneswar.

Dey, Shobhana and Bhattacharjee, S (2003) Collectorless flotation of a coking coal. Transactions Of The Indian Institute Of Metals , 56 (5). pp. 477-482.

Director, NML (2003) Annual Report 2002-2003. NML, Jamshedpur. ISBN 0972-4273

Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-16. ISBN 0972-4265

Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-16. ISBN 0972-4265

Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-12. ISBN 0972-4265

Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-8. ISBN 0972-4265

G

Ghosh, Arindam and Das, Samar and Chatterjee, S and Mishra, B and Ramachandrarao, P (2003) Influence of thermo-mechanical processing and different post-cooling techniques on structure and properties of an ultra low carbon Cu bearing HSLA forging. Materials Science and Engineering A, 348 (1-2). pp. 299-308.

Ghosh, R N (2003) Identification of Novelty in R&D. In: UNSPECIFIED.

Ghosh, Rita and Singh, R J and Singh, D D N (2003) Comparing the corrosion resistance of thermo-mechanically treated rebars of low alloy and mild steels embedded in chloride-contaminated concrete mortars. Corrosion Prevention & Control , 50 (2). pp. 94-103.

Ghosh, Rita and Singh, R J and Singh, D D N (2003) Role of fluoride in accelerating corrosion and pitting of steel in concrete environments. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 391-397.

Gorai, Bipra and Jana, R K and Premchand, (2003) Characteristics and utilisation of copper slag - a review. Resources Conservation and Recycling, 39 (4). pp. 299-313.

Goswami, N G (2003) Marketing : Business Promotion - Some Thoughts and a Few Case Studies. In: UNSPECIFIED.

Gupta, K K and Bhattacharjee, S and Kar, S and Chakravarty, S and Thakur, P and Bhattacharyya, G and Srivastava, S C (2003) Mineral compositions of eight common spices. Communications in Soil Science and Plant Analysis, 34 (5-6). pp. 681-693.

Gupta, M N (2003) Impediments in Technology Transfer. In: UNSPECIFIED.

Gupta, R K (2003) Managing Intellectual Property. In: UNSPECIFIED.

K

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2003) Self-propagating-high-temperature synthesis (SHS) of ultrafine ZrB2 powder. Journal of Materials Science Letters, 22 (17). pp. 1189-1191.

Khatirkar, R K and Badole, R P and Vaish, A K and Humane, M M and De, P K and Paretkar, R K and Peshwe, D R and Prasad, D N (2003) Thermomechanical processing of low carbon, IF and IF high strength steels - A few typical cases. Journal of Metallurgy and materials Science, 45 (4). pp. 161-191.

Konar, J and Chandra, N and Amritphale, S S and Das, N N and Srivastava, S C (2003) Corrosion behaviour of white cast iron in organic acids and their sodium salts. Journal of Metallurgy and Materials Science, 45 (1). pp. 39-43.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2003) Electrodeposited Ni-B alloy films: Preparation and structural aspects. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 341-346.

Kumar, A and Tarafder, S and Mukherjee, Surojit and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2003) Effect of plasma ion implantation on the hydrogen embrittlement of Cu strengthened HSLA-100 steel. Journal of Materials Science, 38 (12). pp. 2667-2671.

Kumar, Sanjay and Das, Swapan K and Daspoddar, P K (2003) Thermo-mechanical behaviour of low cement castables derived from mullite aggregates synthesised from beach sand sillimanite. Ceramics International, 29 (2). pp. 139-144.

Kumar, Sushil and Udayabhanu, G and Godiwalla, K M (2003) Chemical composition and mineralogical characterization of fly ash from Bokaro Thermal Power Station, India. Journal of Metallurgy and materials Science., 45 (1). pp. 55-59.

M

Madhukar, A (2003) Technology Forecasting - An Important Tool for Marketing in R&D. In: UNSPECIFIED.

Mahato, D K and Chaudhary, R K and Das , N N and Srivastava, S C (2003) Thermal behaviour of spray dried PZT and PLNZT powders. Indian Journal Of Pure & Applied Physics , 41 (10). pp. 767-770.

Mahato, D K and Chaudhary, R K and Srivastava, S C (2003) Effect of Na on microstructure, dielectric and piezoelectric properties of PZT ceramic. Journal of Materials Science Letters, 22 (22). pp. 1613-1615.

Maity, S (2003) Study on naturally occurring minerals for the removal of arsenic from groundwater. PhD thesis, National Metallurgical Laboratory (NML) Jamshedpur.

Mallik, A K and Paul, K K and Kumar, A Seshu (2003) Engineering Associated with Research and Development. In: UNSPECIFIED.

Mallikarjun, K and Suwas, S and Ghosh Chowdhury, S and Bhargava, S (2003) Effect of prior beta processing steps on microstructural refinement during thermomechanical processing of a two phase (alpha+beta) titanium alloy. Materials Science and Technology, 19 (12). pp. 1688-1696.

Mehta, K D and Pandey, B D and Mankhand, T R (2003) Studies on kinetics of biodissolution of metals from Indian Ocean nodules. Minerals Engineering, 16 (6). pp. 523-527.

Mishra, D and Anand, S and Panda, R K and Das, R P (2003) Synthesis of high-surface area Mn-doped barium hexa-aluminates by a combination of hydrothermal precipitation–calcination route. Materials Chemistry and Physics, 82 . pp. 892-896.

Mishra, H N and Das, Chitrangada (2003) A review on biological control and metabolism of aflatoxin. Critical Reviews in Food Science and Nutrition, 43 (3). pp. 245-264.

Mishra, K K (2003) Synergy of Technology Transfer. In: UNSPECIFIED.

Mishra, P N and Goswami, N G and Mishra, S N (2003) Marketing in Libraries and Information Centres : A study on promotional efforts with reference to Jamshedpur City. In: UNSPECIFIED.

Mishra, P N and Mishra, S N (2003) Prospects of digital information system and services in National Metallurgical Laboratory (CSIR), Jamshedpur. In: Prospects of digital information system and services in National Metallurgical Laboratory (CSIR), Jamshedpur. In: 48th Convention of Indian Library Association, 22-25 Jan 2003, Bangalore, India.

Mishra, Suman K and Das, Swapan K and Ramachandrarao, P and Belov, D Yu and Mamyan, S (2003) Synthesis of zirconium diboride-alumina composite by the self-propagating, high-temperature synthesis process. Metallurgical and Materials Transactions A, 34 (9). pp. 1979-1983.

Mishra, T and Tiwari, S K and Das, N N and Mahato, B (2003) Synthesis and sorption properties of 13X zeolite derived from coal fly ash. Journal of Metallurgy and materials Science, 45 (4). pp. 193-198.

Mitra, A and Kim, H Y and Louzguine, D V and Nishiyama, N and Shen, B and Inoue, A (2003) Magnetic properties of melt-spun and annealed Fe62Co9.5Gd3.5Si10B15 alloy. Journal Of Physics D-Applied Physics, 36 (18). pp. 2234-2238.

Mitra, A and Kim, H Y and Shen, B L and Nishiyama, N and Inuue, A (2003) Crystallization and magnetic properties of Fe40Co40Cu0.5Al2Zr9Si4B4.5 and Fe62Co9.5Gd3.5Si10B15 amorphous alloys. Materials Transactions , 44 (8). pp. 1562-1565.

US2002000045033 (2003) Sensing device for the non-destructive evaluation of steel structures or components. US6617847.

Mitra, A and Panda, A K and Singh, Ratnakar and Rao, Venkatesh and Ramachandrarao, P (2003) Magnetic and structural behaviours of nanocrystalline Fe70.8Nb3.7Cu1Al2.7Mn0.7Si13.5B7.6 alloy. Philosophical Magazine, 83 (12). pp. 1495-1509.

Mohanta, Ojaswini and Mitra, A and Chattoraj, I (2003) Reversible magnetic and mechanical response in hydrogenated amorphous Fe73.5Nb3Cu1Si13.5B9 alloys. Journal of Magnetism and Magnetic Materials, 266 (3). pp. 296-301.

Mohanty, O N (2003) Challenge in R&D Management : Tata Steel A Case Study. In: UNSPECIFIED.

Mohapatra, B K and Nayak, B (2003) Mn-olivine from Gangpur Group of rocks, Orissa. Journal Of The Geological Society Of India, 61 (5). pp. 581-587.

Mukherjee, S P (2003) Measurement of Customer Satisfaction. In: UNSPECIFIED.

Murthy, D S R and Kumar, Vinay and Rao, K V (2003) Extraction of gold from an Indian low-grade refractory gold ore through physical beneficiation an thiourea leaching. Hydrometallurgy, 68 (1-3). pp. 125-130.

Murthy, D S R and Kumar, Vinay and Rao, K V (2003) low-grade refractory gold ore through physical beneficiation an thiourea leaching. Hydrometallurgy, 68(1-3) (IF-1.227). pp. 125-130.

US2002000112053 (2003) Process for the recovery of gold and silver from used refractory bricks. US6602319.

Murthy, D S R and Kumar, Vinod and Rao, K V (2003) Extraction of gold from an Indian low-grade refractory gold ore through physical beneficiation and thiourea leaching. Hydrometallurgy, 68 (1-3). pp. 125-130.

N

Nachankar, A V and Vaish, A K and Humane, M M and De, P K and Moghe, D V and Pathak, S U (2003) Bake hardening mechanism in steels. Journal of Metallurgy and materials Science, 45 (4). pp. 143-160.

Nayar, S and Sinha, Arvind (2003) Protein induced morphosynthesis of calcium carbonate. Journal of Materials Science Letters, 22 (3). pp. 167-170.

P

Pal, J and Chaudhary, P N and Goswami, M C (2003) Utilisation of LD slag - An overview. Journal of Metallurgy and Materials Science, 45 (2). pp. 61-72.

Pal, J and Goswami, M C and Singh, D P (2003) On The Desulphurisation Of Assam Coal With Coke Oven Gas. Transactions of the Indian Institute of Metals, 56 (3). pp. 239-242.

Pal, J and Goswami, M C and Singh, Manjit and Singh, K K (2003) Desulphurisation of high sulphur coal to improve industrial utilisation. Ironmaking & Steelmaking, 30 (6). pp. 441-446.

Pal, Sital K and Prakash, S (2003) Management of Intellectual Property Rights in R&D Organisations. In: UNSPECIFIED.

Panda, A K and Basu, S and Mitra, A (2003) Demagnetisation effect and its correction on the measurement of magnetic hysteresis loop of melt-spun ribbons. Journal of Magnetism and Magnetic Materials, 261 (1-2). pp. 190-195.

Panda, A K and Ravi Kumar, B and Basu, S and Mitra, A (2003) Crystallization and soft magnetic properties of rapidly solidified Fe73.5Nb3Cu1Si22.5−XBX (X=5, 9, 10, 11.25, 19) alloys. Journal of Magnetism and Magnetic Materials, 260 (1-2). pp. 70-77.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Coating failure analysis using stress intensity factor and fracture energy. Journal of Metallurgy and materials Science, 45 (1). pp. 11-17.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Electrochemical impedance spectroscopy of cashewnut shell liquid coating system. Journal of Metallurgy and materials Science, 45 (2). pp. 97-101.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Localised / galvanic corrosion of Mg-Zn-Al alloy. Journal of Metallurgy and materials Science, 45 (3). pp. 137-141.

Parida, N and Tarafder, S and Das, Swapan K and Kumar, P and Das, Goutam and Ranganath, V R and Bhattacharya, D K (2003) Failure analysis of coal pulverizer mill shaft. Engineering Failure Analysis, 10 (6). pp. 733-744.

Prakash, S and Pal, Sital K (2003) On the know-how package. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 206-214. ISBN 81-87053-57-9

R

Ram, M (2003) Technology Transfer to Small Scale Industries. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 134-137. ISBN 81-87053-57-9

Ramachandrarao, P (2003) Innovation Management. In: Synergy of R&D & Marketing. NML, Jamshedpur, pp. 67-78. ISBN 81-87053-57-9

Ranganathan, S and Ramachandrarao, P (2003) Application of transformation diagrams to predict phase transformation in alloys. Calphad, 27 (1). pp. 39-56.

Rao, V V (2003) Commentary on carbon pickup paper. Welding Journal , 82 (1). pp. 91-92.

Rao, V V (2003) Preparation of net-shape Al2O3/Al3Ni in situ composites by reactive melt penetration. Indian Journal Of Engineering And Materials Sciences , 10 (5). pp. 424-426.

Raposo, V and Vazquez, M and Mitra, A (2003) Torsion dependence of giant magnetoimpedance in amorphous wires. Journal of Magnetism and Magnetic Materials, 254-255 ( ). pp. 179-181.

Ravi Kumar, B and Das, Swapan K and Bhattacharya, D K (2003) Fatigue failure of helical compression spring in coke oven batteries. Engineering Failure Analysis, 10 (2). pp. 291-296.

Ray, Ashok K and Das, Swapan K and Pathak, L C (2003) Synthesis of silicon carbide mats using natural fibers. Materials Letters, 57 (5-6). pp. 1120-1123.

Ray, Ashok K and Sahay, S K and Goswami, B (2003) Assessment of service exposed boiler tubes. Engineering Failure Analysis, 10 (6). pp. 645-654.

Ray, Ashok K and Sinha, S K and Tiwari, Y N and Swaminathan, J (2003) Analysis of failed reformer tubes. Engineering Failure Analysis, 10 (3). pp. 351-362.

Roy, Santanu (2003) Interfacing R&D and Marketing: Tacit Knowledge and S &T Manpower Deployment in CSIR, India. In: Synergy of R&D & Marketing. , . NML, Jamshedpur, pp. 12-28. ISBN 81-87053-57-9

S

Sahoo, K L and Das, S K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al–Fe–V–Si alloys. Materials Science and Engineering A, 355 (1-2). pp. 193-200.

Sahoo, K L and Das, Swapan K (2003) Effect of magnesium on sliding wear performance of cast Al-8.3Fe-0.8V-0.9Si alloys. Materials Science and Technology, 19 (7). pp. 959-965.

Sahoo, K L and Das, Swapan K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al-Fe-V-Si alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 355 (1-2). pp. 193-200.

Sahoo, K L and Rao, Venkatesh and Mitra, A (2003) Crystallization kinetics in an amorphous Al-Ni-Mm-Fe alloy. Materials Transactions , 44 (6). pp. 1075-1080.

Sahoo, K L and Sivaramakrishnan, C S (2003) Some studies on Al–8.3Fe–0.8V–0.9Si alloy for near net shape casting. Journal of Materials Processing Technology, 135 (2-3). pp. 253-257.

Saleem, Sheikh shahid and Nigam, S P (2003) Regression analysis for selection of a noise descriptor to accurately predict traffic noise on Indian highways. Journal of Metallurgy and Materials Science, 45 (3). pp. 127-135.

Sankara Narayanan, T S N (2003) The role of surfactants in phosphate conversion coatings. In: Surfactants in Polymers, Coatings, Inks and Adhesives. Applied Surfactant Series, Vol. 1 . Blackwell Publishing Company Ltd., and CRC Press, Oxford, UK, pp. 271-302. ISBN 978 0849 32808 4

Sankara Narayanan, T S N and Krishnaveni, K and Seshadri, S K (2003) Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Materials Chemistry and Physics, 82 (3). pp. 771-779.

Sankara Narayanan, T S N and Magesh, G and Rajendran, N (2003) Degradation of o-Chlorophenol from aqueous solution by electro-fenton process. Fresenius Environmental Bulletin, 12 (7). pp. 776-780.

Sankara Narayanan, T S N and Selvakumar, S and Stephen, A (2003) Electroless Ni–Co–P ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 172 (2-3). pp. 298-307.

Sarkar, S B (2003) Role of Indigenous R&D in the Present Industrial Scenario. In: Synergy of R&D & Marketing. NML, Jamshedpur, pp. 29-35. ISBN 81-87053-57-9

Satyanarayana, N V (2003) Creativity, Innovation and Problem Solving. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 96-110. ISBN 81-87053-57-9

Sharma, N K (2003) Factors to be Considered for Technology Assessment and Valuation. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 143-163. ISBN 81-87053-57-9

Singh, D D N and Ghosh, Rita (2003) Corrosion resistance performance of fusion bonded epoxy coated rebars used as reinforcement in concrete structures. Journal of Metallurgy and materials Science, 45 (2). pp. 73-83.

Singh, D D N and Ghosh , Rita and Singh, R J (2003) Corrosion Performance of Steel Rebars Embedded in Chloride Contaminated Concrete Mortars-Role of Surface Pre-Treatments. Metals Materials and Processes, 16 (2-3). pp. 1-14.

Singh, D D N and Kumar, A (2003) A fresh look at ASTM g 1-90 solution recommended for cleaning of corrosion products formed on iron and steels. Corrosion Science, 59 (11). pp. 1029-1036.

Singh, M N and Singh, T B and Bhattamishra, A K and Basu, D K and Narang, S K (2003) Utilization of zinc dross as anode during electro-deposition of zinc-iron alloy coatings on steel substrate using chloride bath. Journal of Metallurgy and materials Science, 45 (2). pp. 91-95.

Singh, P K and Ranganath, V R and Tarafder, S and Prasad, Prabha and Bhasin, V and Vaze, K K and Kushwaha, H S (2003) Effect of cyclic loading on elastic–plastic fracture resistance of PHT system piping material of PHWR. International Journal of Pressure Vessels and Piping, 80 (10). pp. 745-752.

Singh, P K and Ranganath, V R and Tarafder, S and Prasad , P and Bhasin, V and Vaze, K K and Kushwaha, H S (2003) Effect of cyclic loading on elastic-plastic fracture resistance of PHT system piping material of PHWR. International Journal of Pressure Vessels and Piping, 80 (10). pp. 745-752.

Singh, Raghuvir (2003) The application of an electrochemical technique to determine the porosity of electroless nickel coatings produced in hypophosphite baths. Anti-corrosion Methods & Materials, 50 (2). pp. 121-128.

Singh, Raghuvir and Chattoraj, I and Kumar, Anil and Ravi Kumar, B and De, P K (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AISI 304 stainless steel. Metallurgical and Materials Transactions A, 34 (11). pp. 2441-2447.

Singh, Ratnakar and Ravi Kumar, B and Kumar, A and Dey, P K and Chattoraj, I (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AlSl 304 stainless steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science , 34-A (11). pp. 2441-2447.

Singh, Ratnakar and Sinha, S N (2003) Beneficiation of High Ash Indian Coal-Problems and Prospects. The Indian Mining and Engineering Journal . pp. 1-4.

Singh, T B and Singh, M N and Basu, D K and Narang, S K (2003) Corrosion behaviour of electro-deposited zinc-iron alloy coatings on mild steel. Journal of Metallurgy and materials Science., 45 (4). pp. 199-203.

Sinha, Arvind and Chakraborty, J and Das, Swapan K and Ramachandrarao, P (2003) Self-assembled growth of calcite particles on a tobacco film. Current Science , 84 (11). pp. 1437-1440.

Sinha, Arvind and Nayar, S and Agrawal, A and Bhattacharya, D (2003) Synthesis of nanosized and microporous precipitated hydroxyapatite in synthetic polymers and Biopolymers. Journal Of The American Ceramic Society , 86 (2). pp. 357-359.

Sinha, Arvind and Nayar, S and Murthy, G V S and Joy, P A and Rao, Venkatesh and Ramachandrarao, P (2003) Biomimetic synthesis of superparamagnetic iron oxide particles in proteins. Journal of Materials Research, 18 (6). pp. 1309-1313.

Sinha, I and Mandal, R K (2003) Simulating the effect of glass microstructures on the crystallisation and percolation behaviour of glass-ceramics. Journal of Non-Crystalline Solids, 324 (1-2). pp. 36-49.

Sivaprasad, S and Swaminathan, J and Tiwari, Y N and Roy, P K and Singh, Raghubir (2003) Remaining life assessment of service exposed reactor and distillation column materials of a petrochemical plant. Engineering Failure Analysis, 10 (3). pp. 275-289.

Srikanth, S and Gopalakrishna, K and Das, Swapan K and Ravi Kumar, B (2003) Phosphate induced stress corrosion cracking in a waterwall tube from a coal fired boiler. Engineering Failure Analysis, 10 (4). pp. 491-501.

Srikanth, S and Rao, D S and Das, Swapan K and Ravi Kumar, B and Nandakumar, K and Dhanuskodi, R and Vijayan, P (2003) Combustion and deposit formation behavior on the fireside surfaces of a pulverized fuel boiler fired with a blend of coal and petroleum coke. Combustion Science and Technology, 175 (9). pp. 1625-1647.

Srikanth, S and Ravi Kumar, B and Das, Swapan K and Gopalakrishna, K and Nandakumar, K and Vijayan, P (2003) Analysis of failures in boiler tubes due to fireside corrosion in a waste heat recovery boiler. Engineering Failure Analysis, 10 (1). pp. 59-66.

T

Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2003) Ductile fracture behaviour of primary heat transport piping material of nuclear reactors. Sadhana, 28 (1-2). pp. 167-186.

To Duy, Ca and Lee, Z H and Park, Y H and Shin, J S (2003) Effect of Lathanium on thermodynamics of sulphides formation in molten steel. Journal of Metallurgy and Materials Science, 45 (2). pp. 85-90.

U

Upadhyay, C and Mishra, D and Anand, S and Verma, H C and Das, R P (2003) Effect of preparation conditions on formation of nanophase Ni–Zn ferrites through hydrothermal technique. Journal of Magnetism and Magnetic Materials, 260 . pp. 188-194.

V

Vaish, A K and Humane, M M and De, P K and Mahato, B and Ravi Kumar, B (2003) Effect of texture formation on formability of cold rolled and annealed extra deep drawing and inerstitial free steel sheets. Journal of Metallurgy and materials Science, 45 (1). pp. 1-10.

Vaish, A K and Minj, R K and Marutiprasad, Y (2003) Modern features for the optimum performance of blast furnace. Journal of Metallurgy and materials Science, 45 (3). pp. 103-125.

Venkateswarlu, K and Das, Swapan K and Chakraborty, M and Murty, B S (2003) Influence of thermo-mechanical treatment of Al-5Ti master alloy on its grain refining performance on aluminium. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 351 (1-2). pp. 237-243.

This list was generated on Sat Dec 7 19:13:28 2024 IST.