Items where Division is "Metal Extraction and Forming" and Year is 2004

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 60.

Article

Agrawal, A and Sahu, K K (2004) Adsorption kinetics for the removal of Co(II) and Zn(II) from wastewater by indion BSR - a chelating ion-exchange resin. Adsorption Science & Technology , 22 (2). pp. 107-118.

Agrawal, A and Sahu, K K and Pandey, B D (2004) A Comparative adsorption study of copper on various industrial solid wastes. AIChE Journal, 50 (10). pp. 2430-2438.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Recent trends and current practices for secondary processing of zinc and lead. Part I: lead recovery from secondary sources. Waste Management & Research, 22 (4). pp. 240-247.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Removal of zinc from aqueous solutions using sea nodule residue. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 237 (1-3). pp. 133-140.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Separation and removal of cobalt and zinc from chloride solution by Indion BSR - A chelating resin. Separation Science and Technology, 39 (10). pp. 2373-2388.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Solid waste management in non-ferrous industries in India. Resources, Conservation and Recycling, 42 (2). pp. 99-120.

Babu, M Nani and Sahu, K K and Pandey, B D and Mankhand, T R (2004) Kinetics of leaching of zinc from sphalerite concentrate with sodium persulphate. Canadian Metallurgical Quarterly , 43 (3). pp. 321-328.

Bhagat, A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2004) Aging behaviour in copper bearing high strength low alloy steels. ISIJ International, 44 (1). pp. 115-122.

Biswas, P K and Godiwalla, K M and Dev, S C (2004) Physical modelling of particle distribution for stir cast metal matrix composite using sand-water and sand - aqueous CaCl2 slurry system. Journal of Metallurgy and materials Science, 46 (2). pp. 67-93.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2004) The Kinetics of Reduction of Iron in Indian Chromite Ores by Carbon. Metals Materials and Processes, 16 (2-3). pp. 199-208.

Chattaraj, Mousumi and Sinha, N K (2004) Isolation and characterization of chemical constituent from the leaves of Cestrum nocturnum. Journal of Metallurgy and materials Science., 46 (4). pp. 243-245.

Chaudhary, P N and Pal, J and Singh, D P and Singh, M and Ghosh, Sukomal (2004) Dephosphorization of steelmaking slag. Transactions of the Indian Institute of Metals, 57 (5). A5.

Duy, P To and Lee, Z H (2004) Incluence of rare earth metals on non-metallic inclusion in 25Cr-7Ni-3Mo-0.25N duplex stainless steel. Journal of Metallurgy and materials Science., 46 (3). pp. 135-146.

Duy, P To and Lee, Z H (2004) Modifying inclusion types and shapes by rare earth metals addition to low carbon steel. Journal of Metallurgy and materials Science., 46 (3). pp. 147-155.

Elango, A (2004) Corrosion behaviour of diffusion coatings deposited by slurry chromising, electro plating and aluminium spraying onto mild steel panel. Journal of Metallurgy and materials Science., 46 (2). pp. 123-133.

Elango, A and Periasamy, V M and Paramasiv, M (2004) Polarization of 57S aluminium used as galvanic anode in 2M NaOH. Journal of Metallurgy and materials Science., 46 (4). pp. 247-252.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2004) An ultra low carbon Cu bearing steel: influence of thermomechanical processing and aging heat treatment on structure and properties. Materials Science and Engineering A, 374 (1-2). pp. 43-55.

Hait, Jhumki and Jana, R K and Sanyal, S K (2004) Mineralogical characteristics of copper electrorefining anode slime and its leached residues. Industrial & Engineering Chemistry Research, 43 (9). pp. 2079-2087.

Jha, Manis K and Kumar, Vinay and Maharaj, L and Singh, R J (2004) Studies on leaching and recycling of Zinc from rayon waste sludge. Industrial & Engineering Chemistry Research, 43 (3). pp. 1284-1295.

Kanari, N and Mishra, D and Gaballah, I and Dupre, B (2004) Thermal decomposition of zinc carbonate hydroxide. Thermochimica Acta, 410 (1-2). pp. 93-100.

Kulkarni, A D and Deepa, V and Saha, Malini and Srinivasan, K (2004) Impact toughness of copper, zinc, tin, a-brass and phosphor bronze at different temperatures. Journal of Metallurgy and materials Science., 46 (3). pp. 175-182.

Kumar, Manoj and Pal, J and Ghosh, S (2004) Performance of sponge iron charging in electric arc furnace. Journal of Metallurgy and materials Science, 46 (3). pp. 197-204.

Kumar, S and Das, S K and Daspoddar, P K (2004) Synthesis of mullite aggregates from fly ash: effect on thermomechanical behaviour of low cement castables. British Ceramic Transactions, 103 (4). pp. 176-180.

Kumar, Sanjay and Bandopadhyay, A and Rajnikanth, V and Alex, T C and Kumar , Rakesh (2004) Improved processing of blended slag cement through mechanical activation. Journal of Materials Science, 39 (10). pp. 3449-3452.

Kumar, Sushil and Prasad, Sanjay and Udayabhanu, G (2004) Studies on some aspects of extraction of nickel from laterite ore. Journal of Metallurgy and materials Science, 46 (1). pp. 39-49.

Lagutkin, S and Achelis, L and Sheikhaliev, S and Uhlenwinkel, V and Srivastava, V C (2004) Atomization process for metal powder. Materials Science and Engineering A, 383 . pp. 1-6.

Manivel, P and Venkatachari, G (2004) The influence of H+ and Cl- ions on the effect of corrosion inhibition of iron by p-substituted anilines. Journal of Metallurgy and materials Science., 46 (3). pp. 165-173.

Mishra, D and Anand, S and Panda, R K and Das, R P (2004) Studies on characterization, microstructures and magnetic properties of nano-size barium hexa-ferrite prepared through a hydrothermalprecipitation–calcination route. Materials Chemistry and Physics, 86 . pp. 132-136.

Mishra, D and Anand, S and Panda, R K and Das, R P (2004) X-ray diffraction studies on aluminum-substituted barium hexaferrite. Materials Letters, 58 . pp. 1147-1153.

Mukhopadhyay, N K and Kurup, Vinod and Srivastava, V C and Joshi, P B and Mandal, R K (2004) High energy ball milling of a Al65Cu20Fe15 quasicrystalline alloy. Journal of Non-Crystalline Solids, 334-335 . pp. 52-56.

Nayar, S and Brahma, Amrita and Barat, Bhaswati and Bhattacharyya, D (2004) UDP-Galactose 4-Epimerase from Kluyveromyces fragilis: analysis of its hysteretic behavior during catalysis. Biochemistry, 43 (31). pp. 10212-10223.

Pal, J and Goswami, M C (2004) Control of silicon in hot metal. Journal of Metallurgy and materials Science, 46 (1). pp. 23-38.

Phuong, To Duy (2004) A Study on the precipitations of rare earth metals inclusion phase in Fe-Cr-Ni-RE System. Journal of Metallurgy and materials Science., 46 (4). pp. 233-242.

Prasad, Sanjay (2004) Reduction studies on polymetallic sea nodules. Journal of Metallurgy and materials Science, 46 (3). pp. 157-164.

Ranganathan, S (2004) Control of charge distribution to optimise metal quality in the production of ferro alloys. Journal of Metallurgy and materials Science, 46 (1). pp. 61-65.

Rao, V Venkateswara (2004) An electrolytic method for studying the microstructure and grain size of Al-1.25% Mn alloy. Indian Journal of Engineering and Materials Sciences, 11 (3). pp. 224-226.

Rudrakshi, G B and Srivastava, V C and Pathak, J P and Ojha, S N (2004) Spray forming of Al–Si–Pb alloys and their wear characteristics. Materials Science and Engineering A, 383 . pp. 30-38.

Sahoo, K L and Das, Samar and Murty, B S (2004) Formation of quasicrystalline related intermetallic compounds in conventionally cast Al-Fe-V-Si alloy. Journal of Non-Crystalline Solids, 334 . pp. 29-32.

Sahoo, K L and Panda, A K and Das, S and Rao, Venkatesh (2004) Crystallization study of amorphous Al87.5Ni7Mm5Fe0.5 alloy by electrical resistivity measurement. Materials Letters, 58 (3-4). pp. 316-320.

Sahu, K K and Agrawal, A and Pandey, B D (2004) Recent trends and current practices for secondary processing of zinc and lead. Part II: zinc recovery from secondary sources. Waste Management & Research, 22 (4). pp. 248-254.

Sahu, S K and Agrawal, A and Pandey, B D and Kumar, Vinay (2004) Recovery of copper, nickel and cobalt from the leach liquor of a sulphide concentrate by solvent extraction. Minerals Engineering, 17 (7-8). pp. 949-951.

Schulz, A and Srivastava, V C and Uhlenwinkel, V and Bauckhage, K (2004) Spray forming of 2014-Al alloy based composites with injection of SiC particulates. Zeitschrift Fur Metallkunde , 95 (9). pp. 763-768.

Sinha, D and Sahoo, K L and Sinha, U B and Swu, T and Chemseddine, A and Fink, D (2004) Gamma-induced modifications of polycarbonate polymer. Radiation Effects and Defects in Solids, 159 (10). pp. 587-595.

Srivastava, V C and Mandal, R K and Ojha, S N (2004) Evolution of microstructure in spray formed Al–18%Si alloy. Materials Science and Engineering A, 383 (1). pp. 14-20.

Srivastava, V C and Ojha, S N (2004) Microstructure and wear characteristics of spray formed and hot extruded Al–Si alloys. Materials Science and Technology, 20 . pp. 1632-1638.

Srivastava, V C and Scheider, A and Uhlenwinkel, V and Ojha, S N and Bauckhage, K (2004) Age-hardening characteristics of Cu–2.4Ni–0.6Si alloy produced by the spray forming process. Journal of Materials Processing Technology, 147 . pp. 174-180.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of porosity and reinforcement content on the electrical conductivity of spray formed 2014-Al alloy + SiCp composites. Journal of Materials Science, 39 (22). pp. 6821-6825.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of thermomechanical treatment on spray formed Cu–Ni–Si alloy. Materials Science and Technology, 20 . pp. 839-848.

To Duy, P and Lee, Z H (2004) Influence of rare earth metals on non-metallic inclusion in 25cr-7Ni-3Mo-0.25N duplex stainless steel. Journal of Metallurgy and Materials Science, 46 (3). pp. 135-146.

Vaish, A K and Goswami, M C and Biswas, P K and Humane, M M and Ramachandrarao, P (2004) Thermodynamic and Kinetic Aspects of Ancient Iron Making Technology in India. Journal of Rural Technology, 1 (4). pp. 156-162.

Vaish, A K and Singh, S D and Minj, R K and Bandyopadhyay, D (2004) An insight into energy saving measures in an integrated steel plant. Journal of Metallurgy and materials Science, 46 (4). pp. 213-231.

Venkateswarlu, K and De, P K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2004) Effect of rolling on AI-5Ti binary master alloy(sponge route) and its grain refining performance in aluminium. Journal of Metallurgy and materials Science, 46 (2). pp. 107-113.

Book or NML Publication

Kumar, Rakesh and Alex, T C and Jha, Manis K and Khan, Z H and Mahaptra, S P and Mishra, C R (2004) Mechanochemistry and the Bayer process of alumina production. In: LIGHT METALS 2004. TMS (The Minerals, Metals and Materials Society), pp. 31-34. ISBN 978-0-470-95294-8

Conference or Workshop Item

Bhagat , A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2004) Prediction of Solubility of Carbonitrides in High Strength Low Alloy Steel. In: Second International Conference on advance structural Steels (ICASS-2004), 2004, China.

Havelia, Sarthak and Malathi, M and Deo, Brahma (2004) Heat Transfer Analysis of Lance Skulling in Top Blown Oxygen Steelmaking converters. In: International Symposium of Research Students on Material Science and Engineering, December 20-22, 2004, Chennai, India.

Kumari, Sarita and Sahu, S K and Sharma, Vikram and Agrawal, A and Bagchi, D and Pandey, B D and Kumar, Vinay (2004) Synthesis of electrolytic copper and nickel powders from the copper bleed electrolyte of a copper smelter. In: Non Ferrous Meet - 2004, 2004.

Ranganathan, S (2004) Pre-Reduction of Chromite Ores. In: Proceeding of International Seminar on 1st Ferro Alloys India, 8-10 Feb 2004, Hyderabad, India.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Development of 2014-Al Alloy Based SiCp Particulate Reinforced Composites by Spray Co-deposition Process. In: International Conference on Powder Metallurgy-2004, October 17-19, 2004, Vienna, Austria.

Patent

NML (2004) A process for the extraction of zinc from zinc waste effluent. 1869DEL2004.

US2002000095526 (2004) Process for recovery of nickel from spent catalyst. US6733564.

This list was generated on Thu Sep 19 15:30:34 2024 IST.