Items where Division is "Metal Extraction and Forming" and Year is 2004

Agrawal, A and Sahu, K K (2004) Adsorption kinetics for the removal of Co(II) and Zn(II) from wastewater by indion BSR - a chelating ion-exchange resin. Adsorption Science & Technology , 22 (2). pp. 107-118.

Agrawal, A and Sahu, K K and Pandey, B D (2004) A Comparative adsorption study of copper on various industrial solid wastes. AIChE Journal, 50 (10). pp. 2430-2438.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Recent trends and current practices for secondary processing of zinc and lead. Part I: lead recovery from secondary sources. Waste Management & Research, 22 (4). pp. 240-247.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Removal of zinc from aqueous solutions using sea nodule residue. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 237 (1-3). pp. 133-140.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Separation and removal of cobalt and zinc from chloride solution by Indion BSR - A chelating resin. Separation Science and Technology, 39 (10). pp. 2373-2388.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Solid waste management in non-ferrous industries in India. Resources, Conservation and Recycling, 42 (2). pp. 99-120.

Babu, M Nani and Sahu, K K and Pandey, B D and Mankhand, T R (2004) Kinetics of leaching of zinc from sphalerite concentrate with sodium persulphate. Canadian Metallurgical Quarterly , 43 (3). pp. 321-328.

Bhagat, A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2004) Aging behaviour in copper bearing high strength low alloy steels. ISIJ International, 44 (1). pp. 115-122.

Bhagat, A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2004) Prediction of Solubility of Carbonitrides in High Strength Low Alloy Steel. In: Second International Conference on advance structural Steels (ICASS-2004), 2004, China.

Biswas, P K and Godiwalla, K M and Dev, S C (2004) Physical modelling of particle distribution for stir cast metal matrix composite using sand-water and sand - aqueous CaCl2 slurry system. Journal of Metallurgy and materials Science, 46 (2). pp. 67-93.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2004) The Kinetics of Reduction of Iron in Indian Chromite Ores by Carbon. Metals Materials and Processes, 16 (2-3). pp. 199-208.

Chattaraj, Mousumi and Sinha, N K (2004) Isolation and characterization of chemical constituent from the leaves of Cestrum nocturnum. Journal of Metallurgy and materials Science., 46 (4). pp. 243-245.

Chaudhary, P N and Pal, J and Singh, D P and Singh, M and Ghosh, Sukomal (2004) Dephosphorization of steelmaking slag. Transactions of the Indian Institute of Metals, 57 (5). A5.

Duy, P To and Lee, Z H (2004) Incluence of rare earth metals on non-metallic inclusion in 25Cr-7Ni-3Mo-0.25N duplex stainless steel. Journal of Metallurgy and materials Science., 46 (3). pp. 135-146.

Duy, P To and Lee, Z H (2004) Modifying inclusion types and shapes by rare earth metals addition to low carbon steel. Journal of Metallurgy and materials Science., 46 (3). pp. 147-155.

Elango, A (2004) Corrosion behaviour of diffusion coatings deposited by slurry chromising, electro plating and aluminium spraying onto mild steel panel. Journal of Metallurgy and materials Science., 46 (2). pp. 123-133.

Elango, A and Periasamy, V M and Paramasiv, M (2004) Polarization of 57S aluminium used as galvanic anode in 2M NaOH. Journal of Metallurgy and materials Science., 46 (4). pp. 247-252.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2004) An ultra low carbon Cu bearing steel: influence of thermomechanical processing and aging heat treatment on structure and properties. Materials Science and Engineering A, 374 (1-2). pp. 43-55.

Hait, Jhumki and Jana, R K and Sanyal, S K (2004) Mineralogical characteristics of copper electrorefining anode slime and its leached residues. Industrial & Engineering Chemistry Research, 43 (9). pp. 2079-2087.

Havelia, Sarthak and Malathi, M and Deo, Brahma (2004) Heat Transfer Analysis of Lance Skulling in Top Blown Oxygen Steelmaking converters. In: International Symposium of Research Students on Material Science and Engineering, December 20-22, 2004, Chennai, India.

NML (2004) A process for the extraction of zinc from zinc waste effluent. 1869DEL2004.

Jha, Manis K and Kumar, Vinay and Maharaj, L and Singh, R J (2004) Studies on leaching and recycling of Zinc from rayon waste sludge. Industrial & Engineering Chemistry Research, 43 (3). pp. 1284-1295.

Kanari, N and Mishra, D and Gaballah, I and Dupre, B (2004) Thermal decomposition of zinc carbonate hydroxide. Thermochimica Acta, 410 (1-2). pp. 93-100.

Kulkarni, A D and Deepa, V and Saha, Malini and Srinivasan, K (2004) Impact toughness of copper, zinc, tin, a-brass and phosphor bronze at different temperatures. Journal of Metallurgy and materials Science., 46 (3). pp. 175-182.

Kumar, Manoj and Pal, J and Ghosh, S (2004) Performance of sponge iron charging in electric arc furnace. Journal of Metallurgy and materials Science, 46 (3). pp. 197-204.

Kumar, Rakesh and Alex, T C and Jha, Manis K and Khan, Z H and Mahaptra, S P and Mishra, C R (2004) Mechanochemistry and the Bayer process of alumina production. In: LIGHT METALS 2004. TMS (The Minerals, Metals and Materials Society), pp. 31-34. ISBN 978-0-470-95294-8

Kumar, S and Das, S K and Daspoddar, P K (2004) Synthesis of mullite aggregates from fly ash: effect on thermomechanical behaviour of low cement castables. British Ceramic Transactions, 103 (4). pp. 176-180.

Kumar, Sanjay and Bandopadhyay, A and Rajnikanth, V and Alex, T C and Kumar , Rakesh (2004) Improved processing of blended slag cement through mechanical activation. Journal of Materials Science, 39 (10). pp. 3449-3452.

Kumar, Sushil and Prasad, Sanjay and Udayabhanu, G (2004) Studies on some aspects of extraction of nickel from laterite ore. Journal of Metallurgy and materials Science, 46 (1). pp. 39-49.

Kumari, Sarita and Sahu, S K and Sharma, Vikram and Agrawal, A and Bagchi, D and Pandey, B D and Kumar, Vinay (2004) Synthesis of electrolytic copper and nickel powders from the copper bleed electrolyte of a copper smelter. In: Non Ferrous Meet - 2004, 2004.

Lagutkin, S and Achelis, L and Sheikhaliev, S and Uhlenwinkel, V and Srivastava, V C (2004) Atomization process for metal powder. Materials Science and Engineering A, 383. pp. 1-6.

Manivel, P and Venkatachari, G (2004) The influence of H+ and Cl- ions on the effect of corrosion inhibition of iron by p-substituted anilines. Journal of Metallurgy and materials Science., 46 (3). pp. 165-173.

Mishra, D and Anand, S and Panda, R K and Das, R P (2004) Studies on characterization, microstructures and magnetic properties of nano-size barium hexa-ferrite prepared through a hydrothermalprecipitation–calcination route. Materials Chemistry and Physics, 86. pp. 132-136.

Mishra, D and Anand, S and Panda, R K and Das, R P (2004) X-ray diffraction studies on aluminum-substituted barium hexaferrite. Materials Letters, 58. pp. 1147-1153.

Mukhopadhyay, N K and Kurup, Vinod and Srivastava, V C and Joshi, P B and Mandal, R K (2004) High energy ball milling of a Al65Cu20Fe15 quasicrystalline alloy. Journal of Non-Crystalline Solids, 334-335. pp. 52-56.

Nayar, S and Brahma, Amrita and Barat, Bhaswati and Bhattacharyya, D (2004) UDP-Galactose 4-Epimerase from Kluyveromyces fragilis: analysis of its hysteretic behavior during catalysis. Biochemistry, 43 (31). pp. 10212-10223.

Pal, J and Goswami, M C (2004) Control of silicon in hot metal. Journal of Metallurgy and materials Science, 46 (1). pp. 23-38.

Phuong, To Duy (2004) A Study on the precipitations of rare earth metals inclusion phase in Fe-Cr-Ni-RE System. Journal of Metallurgy and materials Science., 46 (4). pp. 233-242.

Prasad, Sanjay (2004) Reduction studies on polymetallic sea nodules. Journal of Metallurgy and materials Science, 46 (3). pp. 157-164.

Ranganathan, S (2004) Control of charge distribution to optimise metal quality in the production of ferro alloys. Journal of Metallurgy and materials Science, 46 (1). pp. 61-65.

Ranganathan, S (2004) Pre-Reduction of Chromite Ores. In: Proceeding of International Seminar on 1st Ferro Alloys India, 8-10 Feb 2004, Hyderabad, India.

Rao, V Venkateswara (2004) An electrolytic method for studying the microstructure and grain size of Al-1.25% Mn alloy. Indian Journal of Engineering and Materials Sciences, 11 (3). pp. 224-226.

Rudrakshi, G B and Srivastava, V C and Pathak, J P and Ojha, S N (2004) Spray forming of Al–Si–Pb alloys and their wear characteristics. Materials Science and Engineering A, 383. pp. 30-38.

Sahoo, K L and Das, Samar and Murty, B S (2004) Formation of quasicrystalline related intermetallic compounds in conventionally cast Al-Fe-V-Si alloy. Journal of Non-Crystalline Solids, 334. pp. 29-32.

Sahoo, K L and Panda, A K and Das, S and Rao, Venkatesh (2004) Crystallization study of amorphous Al87.5Ni7Mm5Fe0.5 alloy by electrical resistivity measurement. Materials Letters, 58 (3-4). pp. 316-320.

Sahu, K K and Agrawal, A and Pandey, B D (2004) Recent trends and current practices for secondary processing of zinc and lead. Part II: zinc recovery from secondary sources. Waste Management & Research, 22 (4). pp. 248-254.

US2002000095526 (2004) Process for recovery of nickel from spent catalyst. US6733564.

Sahu, S K and Agrawal, A and Pandey, B D and Kumar, Vinay (2004) Recovery of copper, nickel and cobalt from the leach liquor of a sulphide concentrate by solvent extraction. Minerals Engineering, 17 (7-8). pp. 949-951.

Schulz, A and Srivastava, V C and Uhlenwinkel, V and Bauckhage, K (2004) Spray forming of 2014-Al alloy based composites with injection of SiC particulates. Zeitschrift Fur Metallkunde , 95 (9). pp. 763-768.

Sinha, D and Sahoo, K L and Sinha, U B and Swu, T and Chemseddine, A and Fink, D (2004) Gamma-induced modifications of polycarbonate polymer. Radiation Effects and Defects in Solids, 159 (10). pp. 587-595.

Srivastava, V C and Mandal, R K and Ojha, S N (2004) Evolution of microstructure in spray formed Al–18%Si alloy. Materials Science and Engineering A, 383 (1). pp. 14-20.

Srivastava, V C and Ojha, S N (2004) Microstructure and wear characteristics of spray formed and hot extruded Al–Si alloys. Materials Science and Technology, 20. pp. 1632-1638.

Srivastava, V C and Scheider, A and Uhlenwinkel, V and Ojha, S N and Bauckhage, K (2004) Age-hardening characteristics of Cu–2.4Ni–0.6Si alloy produced by the spray forming process. Journal of Materials Processing Technology, 147. pp. 174-180.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Development of 2014-Al Alloy Based SiCp Particulate Reinforced Composites by Spray Co-deposition Process. In: International Conference on Powder Metallurgy-2004, October 17-19, 2004, Vienna, Austria.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of porosity and reinforcement content on the electrical conductivity of spray formed 2014-Al alloy + SiCp composites. Journal of Materials Science, 39 (22). pp. 6821-6825.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of thermomechanical treatment on spray formed Cu–Ni–Si alloy. Materials Science and Technology, 20. pp. 839-848.

To Duy, P and Lee, Z H (2004) Influence of rare earth metals on non-metallic inclusion in 25cr-7Ni-3Mo-0.25N duplex stainless steel. Journal of Metallurgy and Materials Science, 46 (3). pp. 135-146.

Vaish, A K and Goswami, M C and Biswas, P K and Humane, M M and Ramachandrarao, P (2004) Thermodynamic and Kinetic Aspects of Ancient Iron Making Technology in India. Journal of Rural Technology, 1 (4). pp. 156-162.

Vaish, A K and Singh, S D and Minj, R K and Bandyopadhyay, D (2004) An insight into energy saving measures in an integrated steel plant. Journal of Metallurgy and materials Science, 46 (4). pp. 213-231.

Venkateswarlu, K and De, P K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2004) Effect of rolling on AI-5Ti binary master alloy(sponge route) and its grain refining performance in aluminium. Journal of Metallurgy and materials Science, 46 (2). pp. 107-113.