Items where Author is "Mishra, Suman K"

Article

Verma, Piyush Chandra and Mishra, Suman K (2024) Microstructure, mechanical and electrochemical behavior of magnetron-sputtered carbothermic reduced iron-boride ceramic coatings. Ceramics International, 50(19) Part:B . pp. 36703-36716.

Singh, Komal and Anwar, S and Dubey, Paritosh and Mishra, Suman K (2023) Enhanced thermoelectric performance of mechanically hard nano-crystalline-sputtered SnSe thin film compared to the bulk of SnSe. Journal of Materials Science: Materials in Electronics, 34(13) .

Singh, Komal and Soni, S K and Anwar, S and Dubey, Paritosh and Mishra, Suman K (2022) Influence of temperatures on structure, thermoelectric, and mechanical properties of nanocrystalline SnSe thin films deposited by thermal evaporation. Materials Today Communications, 32 .

Bose, A and Singh, K and Dubey, P and Mishra, S K and Mishra, Suman K (2022) Study of dry sliding wear and corrosion behavior of nanocomposite Al-Si-N coated steel. Surface & Coatings Technology, 441 .

Walunj, M G and Mandal, G K and Ranjan, R K and Pais, R and Mishra, Suman K and Venugopalan, T and Pathak, L C (2021) Role of dew points and Fe pre-coats on the galvanizing and galvannealing of dual phase steel. Surface and Coatings Technology, 422 .

Mahato, P and Banerjee, P and Murmu, Manilal and Hirani, Harish and Murmu, N C and Mishra, Suman K (2021) Investigation on Multifunctional Properties of Sputtered Ti-Si-B-C Coating with Varied Thickness over Targeted Surface. Journal of Materials Engineering and performance .

Soni, and Shekh, M J and Sharma, S K and Mishra, Suman K (2020) Strain rate sensitivity behaviour of the thin films of Al, Al-Si and nanocomposite Al-Si-N: A comparative study. Materials Characterization, 169 (IF-3.562).

Soni, and Sharma, S K and Mishra, Suman K (2020) The effect of Si content on structural, mechanical and optical behaviour of magnetron sputtered Al–Si–N nanocomposite thin films. Journal of Alloys and Compounds, 831 (IF-4.175). p. 154686.

Shukla, A K and Sivakumar, B and Mishra, Suman K (2020) Corrosion Behavior of Ti-Si-B-C Nanocomposite Hard Coating with Different Si Contents on 4130 Steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 51(7) (IF-2.050). pp. 3576-3586.

Verma, Piyush Chandra and Mishra, Suman K (2020) Synthesis of iron boride powder by carbothermic reduction method. Materials Today: Proceedings, Online (SNIP-0.576).

Mandal, G K and Dutta, M and Kumar, Tipu and Mondal, Avik and Walunj, M G and Mishra, Suman K and Pais, R and Pathak, L C (2020) Formation and growth of iron-zinc intermetallics during annealing treatment of galvanized steel. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 29-47.

Mishra, Suman K (2020) Toughening of nanocomposite hard coatings. Reviews on advanced materials science , 59(1) (IF-1.197). pp. 553-585.

Mahato, P and Mishra, Suman K (2019) A prolonged exposure of Ti-Si-B-C nanocomposite coating in 3.5 wt% NaCl solution: Electrochemical and morphological analysis. Surface and Coatings Technology, 375 . pp. 477-488.

Soni, and Mishra, Suman K and Sharma, S K (2019) Influence of nitrogen partial pressure on optical properties of magnetron sputtered Al-Si-N thin films. Thin Solid Films, 682 . pp. 1-9.

Verma, B and Mishra, Suman K (2019) Spectral and structural investigation of layered growth of copper and graphene deposited by sputtering and annealing. Applied Physics A: Materials Science & Processing, 125(8) .

Verma, D and Banerjee, D and Mishra, Suman K (2019) Effect of Silicon Content on the Microstructure and Mechanical Properties of Ti-Si-B-C Nanocomposite Hard Coatings. Metallurgical and Materials Transactions A , 50(2) . pp. 894-904.

Soni, and Kumari, Swati and Sharma, S K and Mishra, Suman K (2018) Effect of Deposition Pressure, Nitrogen Content and Substrate Temperature on Optical and Mechanical Behavior of Nanocomposite Al-Si-N Hard Coatings for Solar Thermal Applications. Journal of Materials Engineering and Performance, 27(12) (IF-1.094). pp. 6729-6736.

Mishra, Suman K and Kumari, Swati (2017) Development of hard and optically transparent Al-Si-N nanocomposite coatings. Surface and Interface Analysis, 49(4) (IF-1.132). pp. 345-348.

Mishra, Suman K and Kumar, V and Tiwari, S K and Mishra, T and Angula, G and Adhikari, S (2016) Development and degradation behavior of protective multilayer coatings for aluminum reflectors for solar thermal applications. Thin Solid Films, 619 (IF- 1.879). pp. 202-207.

Mahato, P and Singh, R J and Pathak, L C and Mishra, Suman K (2016) Effect of nitrogen on mechanical, oxidation and structural behaviour of Ti–Si–B–C–N nanocomposite hard coatings deposited by DC sputtering. Surface and Interface Analysis, 48(10) (IF- 1.132). pp. 1080-1089.

Mahato, P and Nyati, G and Singh, R J and Mishra, Suman K (2016) Nanocomposite TiSiBC Hard Coatings with High Resistance to Wear, Fracture and Scratching. Journal of Materials Engineering and Performance, 25(9) (IF-1.331). pp. 3774-3782.

Mahato, P and Singh, R J and Mishra, Suman K (2016) Nanocomposite Ti-Si-B-C hard coatings deposited by magnetron sputtering: Oxidation and mechanical behaviour with temperature and duration of oxidation. Surface & Coatings Technology, 288 (IF- 2.589). pp. 230-240.

Mishra, Suman K and N, Jagdeesh and Pathak, L C (2016) Fabrication of Nanosized Lanthanum Zirconate Powder and Deposition of Thermal Barrier Coating by Plasma Spray Process. Journal Of Materials Engineering And Performance, 25(7) (IF-1.331). pp. 2570-2575.

Mishra, Suman K and Sherbakov, V A (2016) In-situ synthesis of Ti-Si-C fine grained composite with different amount of TiC: Microstructure and mechanical properties. International Journal Of Refractory Metals & Hard Materials, 59 (IF- 2.155). 19-25.

Mishra, Suman K and Kumar, Rakesh and Soni, and Sreemany, M and Pathak, L C (2015) Ultrathin to Nano Thickness TiN Coatings: Processing, Structural, Mechanical Behavior. Journal of Materials Engineering and Performance, 24(12) (IF-). pp. 5013-5021.

Mishra, Suman K and Shravan Kumar, K and Bysakh, S and Sreemany, M and Pathak, L C (2014) Investigation of interface, microstructure, and mechanical properties of layered thermal barrier coatings of lanthanum zirconate and YSZ deposited by EB-PVD process. Surface and Interface Analysis, 46(7) (IF-1.393). pp. 449-456.

Madge, S V and Caron, A and Gralla, R and Wilde, G and Mishra, Suman K (2014) Novel W-based metallic glass with high hardness and wear resistance. Intermetallics, 47 (IF-1.696). pp. 6-10.

Mishra, Suman K and Gokuul, V and Paswan, S (2014) Alumina-titanium diboride in situ composite by self-propagating high-temperature synthesis (SHS) dynamic compaction: Effect of compaction pressure during synthesis. International Journal of Refractory Metals and Hard Materials, 43 (IF-1.764). pp. 19-24.

Mishra, Suman K and Bhople, A and Paswan, S (2014) Microstructure, hardness, toughness and oxidation resistance of Al2O3-ZrB2 composite with different Ti percentages prepared by in-situ SHS dynamic compaction. International Journal of Refractory Metals and Hard Materials, 43 (IF-1.764). pp. 7-12.

Singh, Raghuvir and Kumar, Damodar and Mishra, Suman K and Tiwari, S K (2014) Laser cladding of Stellite 6 on stainless steel to enhance solid particle erosion and cavitation resistance. Surface and Coatings Technology, 251 (IF-2.199). pp. 87-97.

Rupa, P K P and Chakraborti, P C and Mishra, Suman K (2014) Structure and indentation behavior of nanocomposite Ti–B–N films. Thin Solid Films, 564 (IF-1.867). pp. 160-169.

Mishra, Suman K and Mahato, P and Mahato, B and Pathak, L C (2013) Thermal stability and effect of substrate temperature of TiSiBC hard nanocomposite coatings on microstructure, mechanical, thermal behaviour deposited by magnetron sputtering. Applied Surface Science, 266(1 February) . pp. 209-213.

Kumar, Mukesh and Mishra, Suman K and Mitra, R (2013) Effect of Ar:N-2 ratio on structure and properties of Ni-TiN nanocomposite thin films processed by reactive RF/DC magnetron sputtering. Surface & Coatings Technology, 228 (IF-1.867). pp. 100-114.

Mishra, Suman K and Bhattacharyya, A S and Rupa, P K P and Pathak, L C (2013) XPS Studies on Nanocomposite SiCN Coatings Deposited by Magnetron Sputtering. Nanoscience and Nanotechnology Letters, 4 (3). pp. 352-357.

Singh, Raghuvir and Kumar, Mukesh and Kumar , Deepak and Mishra, Suman K (2012) Erosion and Corrosion Behavior of Laser Cladded Stainless Steels with Tungsten Carbide. Journal of Materials Engineering and Performance, 21(11) (0.855 (SCI)). pp. 2274-2282.

Mishra, Suman K and Pandey, S and Mahato, K and Shravan Kumar, K and Bysakh, S and Srimani, M and Pathak, L C (2012) Microstructural studies on EB-PVD deposited NiCrAlY, YSZ and lanthanum zirconate for thermal barrier applications. Surface and Coatings Technology, 207 (IF-). pp. 143-148.

Mishra, Suman K and Bhattacharyya, A S and Mahato, P and Pathak, L C (2012) Multicomponent Ti-Si-B-C superhard and tough composite coatings by magnetron sputtering. Surface and Coatings Technology, 207 . pp. 19-23.

Mishra, Suman K and Bhattacharyya, A S and Rupa, P K P and Pathak, L C (2012) XPS Studies on Nanocomposite Si-C-N Coatings Deposited by Magnetron Sputtering. Nanoscience and nanotechnology letters, 4 (3). pp. 352-357.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cavitation Erosion in Hydraulic Turbine Components and Mitigation by Coatings: Current Status and Future Needs. Journal of Materials Engineering and Performance, 21 (7). pp. 1539-1551.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cladding of tungsten carbide and stellite using high power diode laser to improve the surface properties of stainless steel. Advanced Materials Research, 585 . pp. 498-501.

Mishra, Suman K and Mahanta, P and Sen, S and Pathak, L C (2012) Effect of Nitrogen on the Growth of Carbon Nitride Thin Films Deposited by RF Plasma Enhanced Chemical Vapor Deposition. Nanoscience and Nanotechnology Letters, 4 . pp. 90-94.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2011) Nanostructured Materials Research at NML. Nano Digest, 3 (4-5). pp. 30-32.

Mishra, Suman K and khusboo, and Sherbacov, V (2011) Fabrication of in-situ Ti–Si–C fine grained composite by the self propagating high temperature synthesis (SHS) process. International Journal of Refractory Metals and Hard Materials, 29 (2). pp. 209-213.

Bhattacharyya, A S and Mishra, Suman K (2011) Micro/nanomechanical behavior of magnetron sputtered Si-C-N coatings through nanoindentation and scratch tests. Journal of Micromechanics and Microengineering, 21 (1). 015011.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K and Dahotre, N B (2011) Electrochemical and mechanical behavior of laser processed Ti–6Al–4V surface in Ringer’s physiological solution. Journal of Materials Science: Materials in Medicine, 22 . pp. 1787-1796.

Rupa, P K P and Chakrborty, P C and Purnapu, Karuna and Mishra, Suman K (2011) Nanoindentation Studies of Hard Nanocomposite Ti-B-N Thin films. AIP Conference Proceedings, 1393 (3.596 (SCI)). pp. 239-240.

Bhattacharyya, A S and Mishra, Suman K (2010) Raman studies on nanocomposite silicon carbonitride thin film deposited by r.f. magnetron sputtering at different substrate temperatures. Journal of Raman Spectroscopy, 41 (10). pp. 1234-1239.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2010) Nanostructured materials: research at NML. Nano Digest, 2 (3). pp. 42-44.

Bhattacharyya, A S and Mishra, Suman K and Mukherjee, S (2010) Correlation of structure and hardness of rf magnetron sputtered silicon carbonitride films. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 28 (4). pp. 505-509.

Bhattacharyya, A S and Das, G C and Mukherjee, S and Mishra, Suman K (2009) Effect of radio frequency and direct current modes of deposition on protective metallurgical hard silicon carbon nitride coatings by magnetron sputtering. Vacuum, 83 (12). pp. 1464-1469.

Bhattacharyya, A S and Mishra, Suman K and Mukherjee, Surojit and Das, G C (2009) A comparative study of Si–C–N films on different substrates grown by RF magnetron sputtering. Journal of Alloys and Compounds, 478 (1-2). pp. 474-478.

Rupa, P K P and Chakraborti, P C and Mishra, Suman K (2009) Mechanical and deformation behaviour of titanium diboride thin films deposited by magnetron sputtering. Thin Solid Films, 517 (9). pp. 2912-2919.

Mishra, Suman K (2009) Nano and Nanocomposite Superhard Coatings of Silicon Carbonitride and Titanium Diboride by Magnetron Sputtering. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 6 (3). pp. 345-354.

Mishra, Suman K and Pathak, L C (2008) Effect of carbon and titanium carbide on sintering behaviour of zirconium diboride. Journal of Alloys and Compounds, 465 (1-2). pp. 547-555.

Sen, S and Mishra, Suman K and Palit Sagar, S and Das, Swapan K and Tarafder, A (2008) Impedance analysis of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 ceramic. Journal of Alloys and Compounds, 453 (1-2). pp. 395-400.

Sen, S and Mishra, Suman K and Palit Sagar, S and Das, Swapan K (2008) Preparation and characterization of PMN-PT nanocomposite. Indian Journal Of Engineering And Materials Sciences , 15 (2). pp. 111-115.

Mishra, Suman K and Bhattacharyya, A S (2008) Effect of substrate temperature on the adhesion properties of magnetron sputtered nano-composite Si–C–N hard thin films. Materials Letters, 62 (3). pp. 398-402.

Sen, S and Mishra, Suman K (2008) Electrical behaviour of PMN–PT–PVDF nanocomposite. Journal of Physics D: Applied Physics, 41 (16). p. 165305.

Mishra, Suman K and Das, Swapan K and Sherbacov, V (2007) Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: A novel approach. Composites Science and Technology, 67 (11-12). pp. 2447-2453.

Sen, S and Das, Swapan K and Mishra, Suman K and Tarafder, A (2007) Low-temperature synthesis of 0.65 PbMg1/3Nb2/3O3-0.35PbTiO(3) ceramics. Journal of the American Ceramic Society, 90 (8). pp. 2634-3638.

Mishra, Suman K and Rupa, P K P and Das, Swapan K and Shcherbakov, V (2007) Effect of titanium diluent on the fabrication of Al2O3–ZrB2 composite by SHS dynamic compaction. Composites Science and Technology, 67 (7-8). pp. 1734-1739.

Mishra, Suman K and Rupa, P K P and Pathak, L C (2007) Surface and nanoindentation studies on nanocrystalline titanium diboride thin film deposited by magnetron sputtering. Thin Solid Films, 515 (17). pp. 6884-6889.

Mishra, Suman K and Shekhar, Chander and Rupa, P K P and Pathak, L C (2007) Effect of pressure and substrate temperature on the deposition of nano-structured silicon–carbon–nitride superhard coatings by magnetron sputtering. Thin Solid Films, 515 (11). pp. 4738-4744.

Mukhopadhyay, Amartya and Basu, Bikramjit and Das Bakshi, Srimanta and Mishra, Suman K (2007) Pressureless sintering of ZrO2–ZrB2 composites: Microstructure and properties. International Journal of Refractory Metals and Hard Materials, 25 (2). pp. 179-188.

Das Bakshi, Srimanta and Basu, Bikramjit and Mishra, Suman K (2006) Microstructure and mechanical properties of sinter-HIPed ZrO2–ZrB2 composites. Composites Part A Applied Science and Manufacturing, 37 (11). pp. 2128-2135.

Das Bakshi, Srimanta and Basu, Bikramjit and Mishra, Suman K (2006) Fretting wear properties of sinter-HIPed ZrO2–ZrB2 composites. Composites Part A Applied Science and Manufacturing, 37 (10). pp. 1652-1659.

Mishra, Suman K and Rupa, P K P and Das, Swapan K and Shcherbakov, V (2006) Effect of alumina diluent on the fabrication of in-situ Al2O3-Ti/ZrB2 composite by self propagating high temperature synthesis dynamic compaction. Metallurgical and Materials Transactions B, 37 (1). pp. 641-647.

Mishra, Suman K and Das, Swapan K and Pathak, L C (2006) Sintering behaviour of self-propagating high temperature synthesised ZrB2–Al2O3 composite powder. Materials Science and Engineering A, 426 (1-2). pp. 229-234.

Mishra, Suman K and Gaur, H and Rupa, P K P and Pathak, L C (2006) Deposition of nanostructured Si–C–N superhard coatings by rf magnetron sputtering. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures , 24 (3). pp. 1311-1317.

Mishra, Suman K and Rupa, P K P and Pathak, L C (2006) Nucleation and growth of DC magnetron sputtered titanium diboride thin films. Surface and Coatings Technology, 200 (12-13). pp. 4078-4081.

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2005) Sintering of ultrafine zirconium diboride powder prepared by modified SHS technique. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 104 (6). pp. 282-284.

Mishra, Suman K and Pathak, L C (2005) Deposition of crystalline C–N film by arc evaporation process. Materials Letters, 59 (27). pp. 3481-3484.

Mishra, Suman K and Das, Swapan K (2005) Sintering and microstructural behaviour of SHS produced zirconium diboride powder with the addition of C and TiC. Materials Letters, 59 (27). pp. 3467-3470.

Pathak, L C and Mishra, Suman K (2005) A review on the synthesis of Y-Ba-Cu-oxide powder. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 18 (9). R 67-R 89.

Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (2004) Synthesis and sintering characteristics of Y–Ba–Cu-oxide superconductors. Materials Science and Engineering B, 110 (2). pp. 119-131.

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2004) Effect of NaCl on the synthesis of TiB2 powder by a self-propagating high-temperature synthesis technique. Materials Letters, 58 (5). pp. 733-738.

Mishra, Suman K and Das, S and Pathak, L C (2004) Defect structures in zirconium diboride powder prepared by self-propagating high-temperature synthesis. Materials Science and Engineering A, 364 (1-2). pp. 249-255.

Mishra, Suman K and Das, Swapan K and Ramachandrarao, P and Blov, D Y (2004) Self-propagating high-temperature synthesis of a zirconium diboride-alumina composite: a dynamic X-ray diffraction study. Philosophical Magazine Letters Online ISSN 1362-3036, 84 (1). pp. 41-46.

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2003) Self-propagating-high-temperature synthesis (SHS) of ultrafine ZrB2 powder. Journal of Materials Science Letters, 22 (17). pp. 1189-1191.

Mishra, Suman K and Das, Swapan K and Ramachandrarao, P and Belov, D Yu and Mamyan, S (2003) Synthesis of zirconium diboride-alumina composite by the self-propagating, high-temperature synthesis process. Metallurgical and Materials Transactions A, 34 (9). pp. 1979-1983.

Mishra, Suman K and Das, Swapan K and Ramachandrarao, P (2002) Microstructure evolution during sintering of self-propagating high-temperature synthesis produced ZrB2 powder. Journal of Materials Research, 17 (11). pp. 2809-2814.

Pathak, L C and Mishra, Suman K and Srikanth, S (2002) Sintering characteristics of Y-Ba-Cu oxide-Ag-x superconductors under argon atmosphere. Journal of Materials Research, 17 (4). pp. 895-900.

Mishra, Suman K and Das, S and Ranganathan, S (2002) Precipitation in high strength low alloy (HSLA) steel: a TEM study. Materials Science and Engineering A, 323 (1-2). pp. 285-292.

Mishra, Suman K and Das, Swapan K and Ray, Ajoy K and Ramachandrarao, P (2002) Effect of Fe and Cr Addition on the Sintering Behavior of ZrB2 Produced by Self-Propagating High-Temperature Synthesis. Journal of the American Ceramic Society, 85 (11). pp. 2846-2848.

Pathak, L C and Mishra, Suman K and Das, Swapan K and Bhattacharya, D (2001) Effect of sintering atmosphere on the weak-link behaviour of YBCO superconductors. Physica C: Superconductivity, 351 (3). pp. 295-300.

Mishra, Suman K and Das, Swapan K and Das, S K and Ramachandrarao, P (2000) Sintering studies on ultrafine ZrB2 powder produced by a self-propagating high-temperature synthesis process. Journal of Materials Research, 15 (11). pp. 2499-2504.

Pathak, L C and Mishra, Suman K and Bhattacharyya, D and Chopra, K L (1999) Sintering characteristics of Y-Ba-Cu-oxide-Ag-x superconductors. Journal of Materials Research, 14 (11). pp. 4148-4156.

Mishra, Suman K and Das, Swapan K and Ray, Ajoy K and Ramachandrarao, P (1999) Effect of nickel on sintering of self-propagating high-temperature synthesis produced titanium carbide. Journal of Materials Research, 14 (9). pp. 3594-3598.

Das, Goutam and Sinha, A N and Mishra, Suman K and Bhattacharya, D K (1999) Failure analysis of counter shafts of a centrifugal pump. Engineering Failure Analysis, 6 (4). pp. 267-276.

Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (1999) Degradation of BPSCCO superconductors during processing. Journal of Materials Science, 34 (7). pp. 1619-1624.

Mishra, Suman K and Ranganathan, S and Das, Swapan K and Das, Samar (1998) Investigations on precipitation characteristics in a high strength low alloy (HSLA) steel. Scripta Materialia, 39 (2). pp. 235-259.

Mishra, Suman K and Pathak, L C and Rao, Venkatesh (1997) Synthesis of submicron Ba-hexaferrite powder by a self-propagating chemical decomposition process. Materials Letters, 32 (2-3). pp. 137-141.

Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (1997) A comparative study of YBCO powders prepared by different processes. Journal of Materials Science Letters, 16 (14). pp. 1208-1211.

Mishra, Suman K and Das , S and Goel, R P and Ramachandrarao, P (1997) Self-propagating high temperature synthesis (SHS) of titanium carbide. Journal of Materials Science Letters, 16 (12). pp. 965-967.

Conference or Workshop Item

Mishra, Suman K (2002) Advanced Techniques for Surface Engineering of Industrial Materials. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Mishra, Suman K and Pathak, L C (2002) Self-Propagating High-Temperature Synthesis(SHS) of Advanced High Temperature Materials. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Pathak, L C and Mishra, Suman K and Srikanth, S (1998) Effect of Silver on the Sintering Characteristics of High T Ceramic Superconductors. In: Proceedings of Composite Materials, March, 1998, NML Jamshedpur, India.

Patent

US2003000393398 (2005) Process for the production of zirconium boride powder. US6908599.

Project Reports

Surbhi, and Mishra, Suman K (2012) Deposition of Hard TI-Si-B-C Nano Composite Coatings on Steel by Magetron Sputtering:Microstructure, Mechanical and Thermal Behavior. Training Report (TR). CSIR -NML, Jamshedpur.

Priyadarshi, Uddeshya and Mishra, Suman K and Kumar, K Shravan (2012) Multilayer Thermal Barrier Coating prepared by EB-PVD process and its structure property correlation. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Verma, Devraj and Mishra, Suman K (2011) Deposition of Multilayered SI-C-N Nanocomposite Coatings from Single Target by Magnetron Sputtering for Engineering Applications. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Rupa, P K P and Mishra, Suman K and Pathak, L C and Ghosh, R N (2007) Nanoindentation Studies of TiB2 films. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Mandhyan, Ajay and Chattoraj, I and Mishra, Suman K and De, P K (2006) Study of Hydrogen Permeation Behaviour of High Strength Aluminium Alloys. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Jindal, Vikas and Srivastava, V C and Mishra, Suman K and Das, Goutam and Ghosh, R N (2006) Study of Structural Evaluation and Mechanical properties of IF Steel and Aluminium sheets processed by ARB process. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Basu, Bikramjit and Mishra, Suman K (2006) Development of toughened zirconia composites ceramics for tribological application. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Srivastava, V C and Mishra, Suman K and Das, Goutam and Ghosh, R N (2006) Study of Structural Evaluation and Mechanical properties of IF Steel and Aluminium sheets processes by ARB process. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)