Items where Subject is "Nanoscience and Nanotechnology"

A

Abhilash, (2020) Dissimilatory Iron-Reducing Bacteria: A Template for Iron Mineralization and Nanomaterial Synthesis. In: Microbes for Sustainable Development and Bioremediation. CRC Press, US, pp. 89-106. ISBN 9780367226008

Abhilash, and Pandey, B D (2012) Synthesis of zinc-based nanomaterials: a biological perspective. IET-Nanobiotechnology, 6 (4). pp. 144-148.

Abhilash, and Revati, K and Pandey, B D (2011) Microbial synthesis of iron-based nanomaterials—A review. Bulletin of Material Science, 34 (2). pp. 191-198.

Abhilash, and Vaidyanathan, Swetha and Meshram, Pratima (2021) An overview on chemical processes for synthesis of graphene from waste carbon resources. Carbon Letters (1.917).

Agrawal, A and Mishra, D and Sahu, K K (2016) Comparative performance assessment of solvents for the extraction of H2SO4 from spent electrolytic bleed stream of copper industry. Journal of Molecular Liquids, 220 (IF-3.648). pp. 82-91.

Akhtar, M and Khajuria, A and Sahu, J K and Swaminathan, J and Kumar, Rajneesh and Bedi, R and Albert, S K (2018) Phase transformations and numerical modelling in simulated HAZ of nanostructured P91B steel for high temperature applications. Applied Nanoscience, 8(7) (IF-3.198). pp. 1669-1685.

B

Badhirappan, G P and Nallasivam, V and Varadarajan, M and Leobeemrao, V P and Bose , S and Venugopal, E and Rajendran, S and Angleo, P C (2018) Phase Competition Induced Bio-Electrochemical Resistance and Bio-Compatibility Effect in Nanocrystalline Zr-x-Cu100-x Thin Films. Journal of nano science and nanotechnology , 18(7) (IF-1.483). pp. 4534-4543.

Balusamy, T and Satendra, Kumar and Sankara Narayanan, T S N (2010) Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel. Corrosion Science, 52 . pp. 3826-3834.

Bansal, G K and Junior, L P and Ghosh, C and Rajnikanth, V and Tripathy, S and Srivastava, V C and Bhagat, A N and Chowdhury, S G (2020) Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials, 51(7) (IF-2.050). pp. 3410-3224.

Barat, Kaustav and Sivaprasad, S and Kar, Sujoy Kumar and Tarafder, S (2020) A novel rate based methodology for creep fatigue life estimation of superalloys. International Journal of Pressure Vessels and Piping, 182 (IF-2.230). p. 104064.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2016) Inverse Hall-Petch like behaviour in a mechanically milled nanocrystalline Al5Fe2 intermetallic phase. Philosophical Magzine, 96(23) (IF-1.350). pp. 2445-2456.

Bedre, Mahesh D and Basavaraja, S and Deshpande, Raghunandan and Sawle, Balaji D and Lagashetty, Arun Kumar and Govindraj, B and Venkataraman, A (2010) Preparation and characterization of polyaniline-NiO nanocomposites via interfacial polymerization. Journal of Metallurgy and Materials Science, 52 (2). pp. 149-154.

Bedre, Mahesh D and Raghunandan, D and Basavaraja, S and Balaji, D S and Lagashetty, Arun Kumar and Venkataraman, A (2010) Preparation and characterization of Magnetic Fe3O4 nanoparticles. Journal of Metallurgy and Materials Science, 52 (3). pp. 209-214.

Bhattacharya, P and Lee, J H and Kar, K K and Park, H S (2019) Carambola-shaped SnO2 wrapped in carbon nanotube network for high volumetric capacity and improved rate and cycle stability of lithium ion battery. Chemical Engineering Journal, 369 (IF-8.355). pp. 422-431.

Bhattacharya, S and Sheikh, Lubna and Tiwari, V and Ghosh, M and Patel, J N and Patel, A B and Nayar, S (2014) Protein-Polymer Functionalized Aqueous Ferrofluids Showing High T2 Relaxivity. Journal of Biomedical Nanotechnology, 10(5) (IF-7.578). pp. 811-819.

Bhattacharyya, A S and Mishra, Suman K (2011) Micro/nanomechanical behavior of magnetron sputtered Si-C-N coatings through nanoindentation and scratch tests. Journal of Micromechanics and Microengineering, 21 (1). 015011.

Bhattacharyya, A S and Mishra, Suman K (2010) Raman studies on nanocomposite silicon carbonitride thin film deposited by r.f. magnetron sputtering at different substrate temperatures. Journal of Raman Spectroscopy, 41 (10). pp. 1234-1239.

Bose, A and Singh, K and Dubey, P and Mishra, S K and Mishra, Suman K (2022) Study of dry sliding wear and corrosion behavior of nanocomposite Al-Si-N coated steel. Surface & Coatings Technology, 441 .

C

Chakraborty, A and Adhikary, M and Venugopalan, T and Nanda, T and Kumar, B R (2016) Effect of ferrite-martensite interface morphology on bake hardening response of DP590 steel. Materials Science and Engineering A-Structural Materials Properties Micro structure and Processing, 676 (IF-3.094). pp. 463-473.

Chinnamaneni, Satya Vani and Balakrishnakurra, and Chintala, Rambabu and Kavuri, Sethu R and Mukkamala, S Babu (2010) Influence of vitamin B3 on morphosynthesis of CaCO3, BaCO3 and SrCO3 micro and nano structures. Journal of Metallurgy and Materials Science, 52 (4). pp. 351-356.

Choudhary, Shyam K and Bhadu, Manish Kumar and Guin, Akshya Kumar and Pramanick, A K and Ghosh, Nabarun and Rout, Tapan Kumar and Das, Sumitesh (2013) Boiling Study of Nanofluid on Graphene Coated Substrate. Journal of Nanofluids, 2 . pp. 1-4.

Choudhury, Samrat Sen and Bandyopadhyay, N R and Pramanick, A K and Bhattacharjee, S (2010) Syntheis and characterization of an aqueous nanometric iron hydroxide suspension suitable for the removal of As(III) and As(V). Journal of Metallurgy and Materials Science, 52 (3). pp. 215-229.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2016) Comparative assessment of cyclic J-R curve determination by different methods in a pressure vessel steel. Journal of Nuclear Materials, 472 (IF-2.048). pp. 55-64.

D

Das, Bappaditya and Kundu, Rajen Preparation of graphene oxide from coal. In: Indian Chemical Engineering Congress & 74th Annual Session of Indian Institute of Chemical Engineers (CHEMCON-2021), 26th - 30th December 2021, CSIR - Institute of Minerals and Materials Technology, Bhubaneswar, India.

Das, Bappaditya and Kundu, Rajen and Chakravarty, Sanchita (2022) Preparation and characterization of graphene oxide from coal. Materials Chemistry and Physics, 290 (4.778). p. 126597.

Das, Bappaditya and Kundu, Rajen and Chakravarty, Sanchita Synthesis and Characterization of Carbon Nanomaterial from Indian Bituminous Coal. In: 73rd Annual Meeting And Symposium of The International Committee for Coal & Organic Petrology (ICCP-2022), September 18 - 25, 2022, New Delhi, India .

Das, Bhaskar and Hossain, S M and Nandi, A and Samanta, Debabrata and Pramanick, A K and Chapa, S O M and Ray, M (2022) Spectral conversion by silicon nanocrystal dispersed gel glass: efficiency enhancement of silicon solar cell. Journal of Physics D- Applied Physics, 55(2) .

Das , B and Hossain, S M and Pramanick, A K and Dey, A and Ray, M (2019) One-Pot Synthesis of Gel Glass Embedded with Luminescent Silicon Nanoparticles. ACS Applied Materials & Interfaces, 11(2) . pp. 2507-2515.

Dey, Swapna and Chattoraj, I (2016) Interaction of strain rate and hydrogen input on the embrittlement of 7075 T6 Aluminum alloy. Materials Science and Engineering: A, 661 (IF-3.094). pp. 168-178.

Dhar, P and Bhattacharjee, S and Nayar, S and Das, S K (2015) Anomalously Augmented Charge Transport Capabilities of Biomimetically Transformed Collagen Intercalated Nanographene-Based Biocolloids. LANGMUIR, 31(12) (IF-4.384). pp. 3696-3706.

Director, NML (2015) Annual Report 2014-2015. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2016) Annual Report 2015-2016. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2018) Annual Report 2017-2018. CSIR- National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2010) NML Diamond Jubilee Souvenir. In: NML Diamond Jubilee Souvenir. National Metallurgy Laboratory, Jamshedpur.

Divya, M and Das, C R and Ghosh Chowdhury, S and Albert, S K and Bhaduri, A K (2016) Effect of Grain Boundary Character Distribution on the Impact Toughness of 410NiMo Weld Metal. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 47A(7) (IF-1.874). pp. 3397-3411.

G

Ghosh Chowdhury, S and Gubicza, Jeno and Mahato, B and Chinh, Nguyen Q and Hegedus, Zoltan and Langdon, T G (2011) Texture evolution during room temperature ageing of silver processed by equal-channel angular pressing. Scripta Materialia, 64 (11). pp. 1007-1010.

Guha, Avijit and Nayar, S and Thatoi, Hruayanath (2010) Microwave irradiation enhances kinetics of the biomimetic process of hydroxyapatite nanocomposites. Bioinspiration & Biomimetics, 5 (2). 024001.

Gupta, N and Bhattacharya, P (2023) Microwave-plasma induced one-step synthesis of Ni(PO3)2 nanosphere-loaded bio-waste derived N, P co-doped carbon for an asymmetric supercapacitor with prolonged life. Journal of Materials Chemistry C, 11(39) . pp. 13503-13517.

Gupta, R N and Das, A K and Nagahanumaiah, and Henal, S (2016) Pulse Electrocodeposited Ni–WC Composite Coating. Materials and Manufacturing Processes, 31(1) (IF-1.630). pp. 42-47.

J

Jariwala, Deep and Chandra , Kaushik and Cao, Anyuan and Saikat , Talapatra and Shima, Mutshihiro and Anuhya, D and Prasad, V V S and Ribeiro, R and Canfield, P C and Wu, D and Srivastava , Anchal and Mandal, R K and Pramanick, A K and Vajtai , Robert and Ajayan , Pulickel M and Sastry, G V S (2012) Growth of Carbon Nanotubes on Quasicrystalline Alloys. The Banaras Metallurgist, 17 . pp. 57-67.

Jin, Rongchao and Qian, Huifeng and Wu, Zhikun and Zhu, Yan and Zhu, Manzhou and Mohanty, Ashok and Garg, Niti (2010) Size focusing: a methodology for synthesizing atomically precise gold nanoclusters. The Journal of Physical Chemistry Letters, 1 (19). pp. 2903-2910.

K

Karar, D and Bandyopadhyay, N R and Pramanick, A K and Acharyya, D and Conibeer, G and Banerjee, N and Kusmartseva, O E and Ray, M (2018) Quasi-Two-Dimensional Luminescent Silicon Nanosheets. Journal of Physical Chemistry C, 122(33) (IF-2.923). pp. 18912-18921.

Kartha, K N (1963) An X-ray study of the reaction of calcium oxide and calcium chloride in the decomposition of monazite. NML Technical Journal, 5 (2). pp. 45-54.

Kumar, Amarjeet and Murugaiyan, Premkumar and Panda, A K and Roy, Rajat K (2020) Effect of compositional elements and processing routes on structural and thermal response in Fe-based metallic glasses. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153279.

Kumar, Ambuj (2007) Biomimetic synthesis and characterization of cobalt nanoparticles. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Kumar, M Ashok and Reddy, K Hemachandra and Reddy, Y Venkata Mohana and Reddy, G Ramachandra and Kumar, N S Venkatesh and Reddy, BH Nanjunda (2010) Assessment of nanoclay filled epoxy on mechanical, thermal and chemical resistance properties of nanocomposites. Journal of Metallurgy and Materials Science, 52 (4). pp. 305-315.

Kumar, Ravi (2014) Graphene Coated Stel. Masters thesis, NML.

Kumar, Sunil (2017) Graphene engendered 2-D structural morphology of aluminium atoms: Molecular dynamics simulation study. Materials Chemistry and Physics, 202 (2.084). pp. 329-339.

Kumar, Sunil (2018) Graphene Engendered aluminium crystal growth and mechanical properties of its composite: An atomistic investigation. Materials Chemistry and Physics, 201 (IF-2.084). pp. 41-48.

Kumar, Sunil (2018) Spreading and orientation of silver nano-drop over a flat graphene substrate: An atomistic investigation. Carbon, 138 (IF-7.082). pp. 26-41.

Kumar, Sunil (2018) Wettability and Structural Evolution of Gold over a Single-Walled Carbon Nanotube: An Atomistic Investigation. The Journal of Physical Chemistry C, 122 (IF-4.484). pp. 16346-16355.

Kumar, Sunil and Das, Suchandan K (2018) Characterization of mechanical properties and nano-porous structure of Aluminium-Magnesium alloy during multi-axial tensile deformation: An atomistic investigation. Journal of Alloys and Compounds, 740 (IF-3.133). pp. 626-638.

Kumar, Sunil and Das, Suchandan K and Pattanayek, S K (2018) Evolution of nanostructure and mechanical properties of silver nano-particle in the confined region between graphene sheets: An atomistic investigation. Computational Materials Science, 152 (2.292). pp. 393-407.

Kumar, Sunil and Sahu, Ranjan K (2023) Aluminum nanotubes as an efficient catalyst for hydrogen production via thermochemical water splitting: a reactive molecular dynamics simulation. Physical Chemistry Chemical Physics .

Kumar, Sunil and Srivastava, V C and Mandal, G K and Pattanayek, S K and Sahoo, K L (2017) Single-Walled Carbon Nanotube Engendered Pseudo-1D Morphologies of Silver Nanowire. Journal of Physical Chemistry C, 121 (IF-4.536). pp. 20468-20480.

L

Lagashetty, Arun Kumar and Bedree, Mahesh and Venkataraman, A (2010) Adsorption study of Pb+2 ions on nanoceramics. Journal of Metallurgy and Materials Science, 52 (4). pp. 357-362.

Lakshmi Kruthika, N and Bhaskar Raju, G and Prabhakar, S (2013) Degradation of Tannic Acid Using Tio2 Nanotubes as Electrocatalyst. International Journal of Nanoscience (ijn) . pp. 481023-481031.

Lendave, S A and Karande, V S and Deskmukh, L P (2010) Structural and transport characteristics of HgxCd1-xS thin composite films : A correlation. Journal of Metallurgy and Materials Science, 52 (4). pp. 363-370.

Linol, Julie and Martinetto, Pauline and Anne, Michel and Coquerel, Gérard (2011) On the existence of a dynamic critical point by using wet milling on (±) modafinil. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

M

Madge, S V and Louzguine, D V and Lewandowski, J J and Greer , A L (2012) Toughness, extrinsic effects and Poisson’s ratio of bulk metallic glasses. Acta Materialia, 60 . pp. 4800-4809.

Magadevan, D and Dhivya, E and Mundari, N D A and Mishra, T and Aman, Noor (2019) Development of novel TiO2-Cu2(OH)PO4 heterojunction as nanophotocatalyst for improved Cr (VI) reduction. Journal of Environmental Chemical Engineering, 7(2) . p. 102968.

Mayuri, S and Jha, Niki S and Jha, S K (2023) Curcumin-capped gold nanorods as optical sensing platform for sequence-specific detection of DNA based on their self-assembly. International Journal of Biological Macromolecules, 253(Part 3) .

Mishra, Suman K and Bhattacharyya, A S and Rupa, P K P and Pathak, L C (2012) XPS Studies on Nanocomposite Si-C-N Coatings Deposited by Magnetron Sputtering. Nanoscience and nanotechnology letters, 4 (3). pp. 352-357.

Mishra, Suman K and Bhattacharyya, A S and Rupa, P K P and Pathak, L C (2013) XPS Studies on Nanocomposite SiCN Coatings Deposited by Magnetron Sputtering. Nanoscience and Nanotechnology Letters, 4 (3). pp. 352-357.

Mishra, Suman K and khusboo, and Sherbacov, V (2011) Fabrication of in-situ Ti–Si–C fine grained composite by the self propagating high temperature synthesis (SHS) process. International Journal of Refractory Metals and Hard Materials, 29 (2). pp. 209-213.

Mishra, Suman K and Kumar, Rakesh and Soni, and Sreemany, M and Pathak, L C (2015) Ultrathin to Nano Thickness TiN Coatings: Processing, Structural, Mechanical Behavior. Journal of Materials Engineering and Performance, 24(12) (IF-). pp. 5013-5021.

Mishra, Suman K and Mahanta, P and Sen, S and Pathak, L C (2012) Effect of Nitrogen on the Growth of Carbon Nitride Thin Films Deposited by RF Plasma Enhanced Chemical Vapor Deposition. Nanoscience and Nanotechnology Letters, 4 . pp. 90-94.

Mishra, Suman K and Pandey, S and Mahato, K and Shravan Kumar, K and Bysakh, S and Srimani, M and Pathak, L C (2012) Microstructural studies on EB-PVD deposited NiCrAlY, YSZ and lanthanum zirconate for thermal barrier applications. Surface and Coatings Technology, 207 (IF-). pp. 143-148.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2011) Nanostructured Materials Research at NML. Nano Digest, 3 (4-5). pp. 30-32.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2010) Nanostructured materials: research at NML. Nano Digest, 2 (3). pp. 42-44.

Mohanta, Ojaswini (2011) Development of Co-Fe Based Nanostructured Soft Magnetic Materials for High Temperature Applications. PhD thesis, Bengal Engineering and Science University, Shibpur, Howrah.

Mohanty, Ashok and Garg, Niti and Jin, Rongchao (2010) Robust gold nanoparticles stabilized by trithiol for application in chemiresistive sensors. Nanotechnology, 21 . p. 405501.

Mohanty, Ashok and Garg, Niti and Jin, Rongchao (2010) A Universal Approach to the Synthesis of Noble Metal Nanodendrites and Their Catalytic Properties. Angewandte Chemie International Edition, 49 (29). pp. 4962-4966.

Mohanty, Ashok and Mondal, Aniruddha (2013) Visible light induced synthesis of fluorescent silver clusters in reverse micelles. Nanoscale, 5 (IF-6.233). pp. 7238-7241.

Mohapatra, J and Mishraz, D K and Singh, S K and Mahato, B and Mitra, A (2013) Synthesis of Nanocrystalline Co Doped ZnO by Chemical Route and Its Magnetic Properties. Nanoscience and Nanotechnology letters, 5/5 . pp. 563-567.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2013) Grain size softening effect in Al62.5Cu25Fe12.5 nanoquasicrystals. Applied Physics Letters, 103 (IF-3.79). p. 201914.

Murugaiyan, Premkumar and Abhinav, Anand and Verma, Rahul and Panda, A K and Mitra, Amitava and Baysakh, Sandip and Roy, Rajat K (2018) Influence of Al addition on structural, crystallization and soft magnetic properties of DC Joule annealed FeCo based nanocrystalline alloys. Journal of Magnetism and Magnetic Materials, 448 (IF-2.630). pp. 66-74.

Murugaiyan, Premkumar and Mitra, A and Roy, Rajat K and Panda, Ashis K (2022) Nanocrystallization and Core-loss properties of Fe-rich FeSiBPNbCu nanocrystalline alloy. Journal of Magnetism and Magnetic Materials, 552 .

N

Nath, Prekshya and Bar, H N and Bhattacharjee, Amit and Sen, I (2024) Designing of novel microstructure and its impact on the improved service temperature mechanical performance of 2nd and 3rd generation advanced intermetallic TiAl alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and processing, 893 .

Nayar, S and Guha, Avijit (2011) A Novel Biomimetic Material-Glycine-PVA Ferrofluid That Crosses the Blood-Brain Barrier. Journal of Biomedical Nanotechnology, 7 (1). p. 78.

P

Pal, Anindya and Metya, Avijit Kumar and Chowdhury, R A and Sinha, A (2020) Structural and Mechanical Behavior of Mechanochemically Synthesized Nanocrystalline Hydroxyapatite from Mercenaria Clam Shells. Transactions of the Indian Ceramic Society, 29(11) . pp. 175-181.

Poddar, Palash and Sahoo, K L and Mukherjee, S and Ray, Ashok K (2012) Creep behaviour of Mg-8% Sn and Mg-8% Sn-3% Al-1% Si alloys. Materials Science and Engineering A, 545 . pp. 103-110.

Pramanick, A K (2014) Al-Si-Zr Alloy Based Material For Biomedical Application. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Unpublished)

Pramanick, A K (2018) High Entropy Zr-Ca-Si-Ti-Fe based Alloy for Biomaterial Application. Exploratory (OLP). http://www.nmlindia.org, http://www.nmlindia.org. (Unpublished)

Pramanick, A K and Dhayal, A and Kailath, A J and Yaneva, S and Stoichev, N (2013) Oxide Layers on Rapidly Solidified and Bulk Al-Si-Zr Alloys Formed by Oxidation in Air and Anodizing Process. In: Nanoscience & Nanotechnology-13. Bulgarian Academy of Sciences, Bulgaria, pp. 137-139. ISBN ISBN 1311-9702

Pramanick, A K and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Minj, R K (2011) Strengthening mechanism of V and Nb microalloyed low C Steel rebars produced through TMT. Collaborative (CLP). CSIR-NML, Jamshdpur. (Unpublished)

Pramanick, A K and Kumar, Rahul (2015) Graphene coated on Ni plated steels. Training Report (TR). http://eprints.nmlindia.org, CSIR-NML. (Unpublished)

Pramanick, A K and Sinha, Arvind (2008) Nano-crystallization Studies on Cobalt containing Bulk Metallic Glasses. Grant in Aid (GAP). CSIR-NML, Jamshdpur. (Unpublished)

Pramanick, A K and Sinha, Arvind and Nayar, S and Das, Goutam and Mitra, A (2013) Biomimetic Hydroxyapatite Coating on Zirconium Based Biocompatible Alloys. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Submitted)

Pratihar, B and Jana, Animesh and Biswas, S and De, Srishendu (2023) Pd nanoparticles-decorated borophene nanosheets for intrinsic polarization-induced visible light photocatalysis. Catalysis Science & Technology, 13(5) . pp. 1558-1570.

R

Raji, K and Cecil Raj, S Alfred (2010) Sintered properties of aluminium alloy for better nano tool products. Journal of Metallurgy and Materials Science, 52 (2). pp. 169-172.

Rao, D S and Mohapatra, B K (2000) Microscopy in mineral processing - A review. Journal of Metallurgy and materials Science, 42 (1). pp. 31-42.

Ravi Kumar, B and Sahu, J K and Das, Swapan K (2012) Influence of Annealing Process on Recrystallisation Behaviour of a Heavily Cold Rolled AISI 304L Stainless Steel on Ultrafine Grain Formation. Materials Science Forum , 715-716 . pp. 334-339.

Ray, Mallar and Basu, T S and Jana, Arpita and Bandopadhyay, N R and Hossain, S M and Pramanick, A K and Kile, Robert F (2010) Luminescent core-shell nanostructures of silicon and silicon oxide: Nanodots and nanorods. Journal of Applied Physics, 107 (6). 064311.

Ray, Mallar and Pramanick, A K (2016) Optical and Structural Characterization of Reduced Graphene Oxide. Masters thesis, IIEST, Shibpur, Howrah & CSIR NML.

Roy, Rajat K and Kernion, Sam J and Shen, Shen and McHenry, Michael E (2011) Crystallization behavior and high temperature magnetic phase transitions of Nb-substituted FeCoSiBCu nanocompositesof. Applied Physics Letters, 99 . 192506-1-192506-3.

Roy, Rajat K and Sarkar, Partha and Singh, Satnam and Panda, A K and Mitra, A (2011) Crystallization kinetics and giant magneto impedance behavior of FeCo based amorphous wires. In: TMS 2011, 27 Feb- 3 March, 2011, San Diego, CA, USA.

Roy, Rajat K and Shen, Shen and Kernion, Sam J and McHenry, Michael E (2012) Effect of P addition on nanocrystallization and high temperature magnetic properties of low B and Nb containing FeCo nanocomposites. Journal of Applied Physics, 111 . 07A301-1.

S

Sahu, Ranjan K and Kumar, Sunil and Mandal , D and Das Chakraborty, S and Bhattacharya, P and Mishra, T (2021) Dangling Bond-Induced Surface Depletion in CdS Leaf. ACS Applied Electronic Materials, 3(7) . pp. 2977-2987.

Sahu, S C and Samantara, A K and Dash, A and Juluri, R R and Sahu, Ranjan K and Mishra, B K and Jena, B K (2013) Graphene-induced Pd nanodendrites: A high performance hybrid nanoelectrocatalyst. Nano Research, 6/9 . pp. 635-643.

Sankara Narayanan, T S N (2011) Graphene - Its role in energy storage devices. [Presentation Slide] (Unpublished)

Sarkar, C and Anuvrat, K and Garai, S and Sahu, Sumant Kumar and Chakraborty, J (2020) One pot method to synthesize three-dimensional porous hydroxyapatite nanocomposite for bone tissue engineering. Journal of Porous Materials, 27(1) (IF-2.183). pp. 225-235.

Sarkar, Partha and Roy, Rajat K and Panda, A K and Mitra, A (2013) Optimization of process parameters for developing FeCoSiB amorphous microwires through in-rotating-water quenching technique. Applied Physics A Materials Science & Processing, 111 (IF-1.630). pp. 575-580.

Sarkar, Samata (2008) Synthesis & Characterisation of Silicon nano Particles. Masters thesis, Bengal Engineering and Science Universiy, Shibpur.

Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.

Sen, S and Mishra, Suman K (2008) Electrical behaviour of PMN–PT–PVDF nanocomposite. Journal of Physics D: Applied Physics, 41 (16). p. 165305.

Sharma, Hemant and Chauhan, Ravi and Srivastava, V C (2005) Development of Ultra High Strength and Nanocrystalline Materials by Accumulative Roll Bonding. In: International Conference on Materials Science and Technology(MS&T05) (American Society of Metals), September 27-30, 2005, Pittsburgh, Pensylvania.

Sheikh, L and Sinha, S and Singhababu, Y N and Verma, V and Tripathy, S and Nayar, S (2018) Traversing the profile of biomimetically nanoengineered iron substituted hydroxyapatite:synthesis, characterization, property evaluation, and drug release modeling. RSC Advances, 8(35) (IF-3.049). pp. 19389-19401.

Sheikh, Lubna and Tripathy, S and Nayar, S (2016) Biomimetic matrix mediated room temperature synthesis and characterization of nano-hydroxyapatite towards targeted drug delivery. Rsc Advance, 6(67) (IF-3.108). pp. 62556-62571.

Shi, D and Sun, L L and Mi, G J and Sheikh, Lubna and Bhattacharya, S and Nayar, S and Webster, T J (2014) Controlling ferrofluid permeability across the blood-brain barrier model. Nanotechnology, 25(7) (IF-3.672).

Shyamal, S and Hajra, P and Mandal, H and Singh, J K and Satpati, A K and Pande, S and Bhattacharya, C (2015) Effect of Substrates on the Photoelectrochemical Reduction of Water over Cathodically Electrodeposited p-Type Cu2O Thin Films. ACS Applied Materials and Interfaces, 7(33) (IF-6.723). pp. 18344-18352.

Siddique, A B and Hossain, S M and Pramanick, A K and Ray, M (2021) Excitation dependence and independence of photoluminescence in carbon dots and graphene quantum dots: insights into the mechanism of emission. Nanoscale, 13(39) .

Siddique, A B and Singh, V P and Chatterjee, S and Pramanick, A K and Ray, M (2018) Facile synthesis and versatile applications of amorphous carbon dot. In: International Conference on Functional Nanomaterials (IC-FNM), Sept 28-29, 2016, Howrah, INDIA.

Singh, Komal and Soni, S K and Anwar, S and Dubey, Paritosh and Mishra, Suman K (2022) Influence of temperatures on structure, thermoelectric, and mechanical properties of nanocrystalline SnSe thin films deposited by thermal evaporation. Materials Today Communications, 32 .

Singh, Y P and Dasgupta, S and Nayar, S and Bhaskar, R (2020) Optimization of electrospinning process & parameters for producing defect-free chitosan/polyethylene oxide nanofibers for bone tissue engineering. Journal of biomaterials science-polymer edition, 31(6) (IF-2.158). pp. 781-803.

Srivastava, V C and Surreddi, K B and Scudino, S and Uhlenwinkel, V and Schowalter, M and Schulz, A and Eckert, J and Rosenauer, A and Zoch, H -W (2013) Microstructural characteristics of spray formed and heat treated Al–(Y, La)–Ni–Co system. Journal of Alloys and Compounds, 578 (IF-2.390). pp. 471-480.

Srivastava, V C and Uhlenwinkel, V (2013) Application Oriented New Materials by Spray Forming. The Banaras Metallurgist, 18 . pp. 21-29.

Stefanov, G and Stoichev, N and Avdeev, A and Kiradzhiyska, D and Vassilev, G and Pramanick, A K (2013) Phase Composition and High-Temperature Oxidation Behaviour of Nano-Microcrystalline Al-Si11-Zr Alloys. In: Nanoscience & Nanotechnology-13. Bulgarian Academy of Sciences, Bulgar, pp. 140-143.

Stoichev, N and Pramanick, A K and Yaneva, S and Giurov, S and Lazarova, M and Setman, D and Stefanov, G (2010) Influence of Zr on structure development in rapidly solidified AI-Si alloys. In: Nanoscience & Nanotechnology-10. Bulgaria, Sofia, Bulgaria, pp. 138-140. ISBN 1313-8995

Sujatha, G and Sinha, Arvind and Singh, Sashi (2011) Cells Behaviour in Presence of Nano-Scaffolds. Journal of Biomedical Nanotechnololgy, 7 (1). pp. 43-44.

T

Tiwari, S K and Choubey, Pankaj K and Mahapatra, S P (2012) Chlorobutyl elastomer-multiwalled carbon nanotube nanocomposites as effective barrier materials. Journal of Metallurgy and Materials Science, 54(4) . pp. 279-289.

Tripathy, S and Jena, P S M and Sahu, V K and Sarkar, S K and Ahlawat, S and Biswas, A and Mahato, B and Tarafder, Soumitra and Chowdhury, S G (2022) On the Competitive Substitutional Partitioning During Nano-pearlitic Transformation in Multicomponent Steels. Metallurgical and Materials Transactions A-Physical Metallurgical and Materials Science, 53(5) . pp. 1806-1820.

U

Ullah, Wahadat (2007) Development of ultra- fine grained aluminium by severe plastic deformation. Masters thesis, National Metallurgical Laboratory.

V

Venkateswarlu, K and Rajnikanth, V and Sen, Mani Kuntal and Alhajeri, S N and Langdon, T G (2010) Application of High-Pressure Torsion to Al-Si Alloys with and without Scandium Additions. Materials Science Forum, 667-669 . pp. 743-748.

Y

Yadav, Abhishek (2021) Synthesis of nano crystalline nickel by severe plastic deformation. Masters thesis, CSIR-National Laboratory Jamshedpur, Jharkhand .