Items where Year is 2011

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 401.

UNSPECIFIED (2011) Frontiers in Mechanochemistry and Mechanical Alloying. In: Kumar, Rakesh and Srinivasan, Srikanth and Mehrotra, Surya Pratap, (eds.) Frontiers in Mechanochemistry and Mechanical Alloying. CSIR-National Metallurgical Laboratory, Jamshedpur, pp. 1-334. ISBN 97881-87053-69-8

Abdlmanam, S and Elmaryami, A and Omar, Badrul (2011) Developing 1-D mm of axisymmetric transient quenched molybdenum steel AISI-SAE 4037H to determine lowest hardness point. Journal of Metallurgy and Materials Science, 53 (3). pp. 289-303.

Abhilash, and Prakash, Mayuri and Mehta, K D and Pandey, B D (2011) Microbial Composite in Trivalent Chromium Remediation from Effluents. In: IIIrd International Congress on Nonferrous Metals, 7-9th Sept 2011, Krasnoyarsk,Russia.

Abhilash, and Singh, Nivedita and Mehta, K D and Pandey, B D (2011) Kaolinte Based Microbial Composite in Cr(III) sorption from waste waters. In: National Seminar on Environmental Waste Management in Metallurgical Industries, 15-16th March 2010, ITBHU,Varanasi.

Abhilash, and VenkatRaman, R and Mehta, K D and Pandey, B D (2011) Isolation and growth kinetic studies of novel isolates from Indian Ocean nodules. Indian Journal of Marine Sciences, 40 (5). pp. 648-652.

Abhilash, and Beena, Kumari (2011) Technology Transfer-A Case Study at NML. In: Technology Valorisatioin and Management at ASCI, 30Jan-12Feb2011, Hyderabad.

Abhilash, and Dhal, B and Mehta, K D and Kumar, Vinay and Pandey, B D (2011) Bio-processing for metal extraction, recycling and effluent treatment- an overview. The Banaras Metallurgist, 16 ( ). pp. 109-115.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2011) Bioleaching - An Alternate Uranium Ore Processing Technology for India. Energy Proceedia, 7 . pp. 158-162.

Abhilash, and Pandey, B D (2011) Role of ferric ions in bioleaching of uranium from low tenor Indian ore. Canadian Metallurgical Quaterly, 50 (2). pp. 102-112.

Abhilash, and Prakash, M and Mehta, K D and Pandey, B D (2011) Microbial Composite in Trivalent Chromium Remedition from Effluents. In: Proceedings of the Third International Congress on Non-ferrous metals (2011), September 7-9, 2011, Krasnoyarsk, Russia.

Abhilash, and Revati, K and Pandey, B D (2011) Microbial synthesis of iron-based nanomaterials—A review. Bulletin of Material Science, 34 (2). pp. 191-198.

Acharya, Bishnu Prasad and Tiwari, S K (2011) Electrochemical study of organic and inorganic hybrid coatings on Al-7075 (STR). Training Report (TR). NML, Jamshedpur. (Submitted)

Achimovičová, M and Baláž, Peter and Rečnik, A and Kováč, J and Rečnik, A and Kováč, J and Feldhoff, A and Gock, E (2011) Mechanochemical synthesis of nanocrystalline lead selenide. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Agarwal, Anup and Saha, Sudhir and Tarafder, Mita (2011) Is Fractal dimension a true quantifier of microstructure? Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Agarwal, Sanjay and Sahu, K K and Godiwalla, K M and Jana, R K (2011) Studies on the Production of Ferro-Silico-Manganese Alloy in Arc Furnace from Polymetallic Sea Nodule. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India.

Agrawal, A and Kumari, S and Sahu, K K (2011) Studies on solvent extraction of iron(III) as a step for conversion of a waste effluent to a value added product. Journal of Environmental Management, 92 (12). pp. 3105-3111.

Agrawal, A and Pathak, Pankaj and Mishra, D and Sahu, K K (2011) Recovery of metal values from spent nickel-cadmium rechargeable batteries by solvent extraction route. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Agrawal, A and Perween, M and Pramanick, Shubhajit and Sahu, K K (2011) Recovery of copper from PCB leach solution by solvent extraction. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Aireddy, H and Mishra, S C (2011) Tribological behavior and mechanical properties of Bio-waste reinforced polymer matrix composites. Journal of Metallurgy and Materials Science, 53 (2). pp. 139-152.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2011) Anomalous reduction in surface area during mechanical activation of boehmite synthesized by thermal decomposition of gibbsite. Powder Technology, 208 (1). pp. 128-136.

Alex, T C and Sasikumar, C and Kailath, A J and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2011) Analysis of Mechanically Induced Reactivity of Boehmite Using Kinetics of Boehmite to gamma-Al2O3 Transformation. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 42 (3). pp. 592-603.

Ali, Malek and Basu, Projjal (2011) Synthesis of nanostructured titanium carbide from titanium oxide and Ferro-titanium through mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Aman, Noor and Mishra, T and Hait, Jhumki and Jana, R K (2011) Simultaneous photoreductive removal of copper (II) and selenium (IV) under visible light over spherical binary oxide photocatalyst. Journal of Hazardous Materials, 186 (12). pp. 360-366.

Anand, Kshitiz and Malathi, M (2011) Mathematical Modelling of Heat Transfer and Solidification during continuous Casting of Steel. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Anjali, Kumari and Pandey, R K (2011) Clean coal technology—a technical response to the environmental challenges. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Arora, Punit and Gupta, Suneel K and Bhasin, V and Vaze, KK and Sivaprasad, S and Tarafder, S (2011) Multiaxial fatigue studies on carbon steel piping material of Indian PHWRs. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India .

Bagui, S and Narasaiah, N and Bar, H N and Das, Swapan K and Parida, N and Upadhyay, A K and Sharma, R K (2011) Evaluation of Center Buffer Coupler. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Bairwa, Rajdeep and Kishore, Kaushik (2011) Analysis of strain hardening behaviour of high performance TWIP,TRIP and FBDP Steels-I. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

Balasubramanian, Krishnan (2011) NDE Tools for process and product monitoring in manufacturing. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Baláž, Peter and Dutková, Erika (2011) Applied mechanochemistry of solids (a review). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Balusamy, T and Satendra , Kumar and Sankara Narayanan, T S N (2011) Electrochemical behaviour of surface modified AISI 304 grade stainless steel in ringer’s solution. Transactions of the Indian Institute of Metals, 64 (4-5). pp. 507-511.

Bar, H N and Sahu, J K and Parida, N and Gunjan, M K (2011) Failure Investigation of Components of Aero Engine No. HDR-80376U. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Bara, Nikhil Anurag and Agarwal, Sanjay (2011) Study the overall aspects of Electric Arc Furnace operation. Training Report (TR). CSIR-NML, Jamshedpur.

Baral, Jayashree (2011) Creep characterization of Boron added P91 steel in the temperature range 600 - 650 degree C. Masters thesis, National Metallurgical Laboratory (NML).

Baruah, B P and Khare, Puja and Rao, P G (2011) Management of acid mine drainage (AMD) in Indian coal mines. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Berg, Frenk van den and Yang, Haibing (2011) Real-time Meniscus Level and Slag Thickness Measurement by RADAR. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Berg, Frenk van den and Yang, Haibing (2011) Real-time Meniscus Level and Slag Thickness Measurement by RADAR. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Besterci, Michal and Sülleiová, Katarína and Velgosová, Oksana (2011) Mechanical alloying of Al-C system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Bhagat, R P (2011) Improvement in Quality Parameters of Super-Fluxed Sinter from Indian Iron Ores: NML’s Experience. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Bhagat, R P (2011) Inter-influencing factors in affecting BF coke rate – statistical approach. In: Proc. : Inter. Conf. on Energy Efficiency in Steel Industry (EESI-2011), Org. by SAIL-RDCIS Ranchi, Bureau of Energy Efficiency Min. Of Power, Gov. of India New Delhi, Indian Institute of Metals, Ranchi Chapter, December 14-16, 2011, Ispat Bhawan, Ranchi.

Bhagat, R P (2011) Modeling of air flow through sinter mix bed. In: Proc. : Inter. Conf. on Mathematical Modelling and Application to Industrial Problems (MMIP-2011), Org. by Dept of Mathematics, March 28-31, 2011, National Institute of Technology, Calicut , Kerala .

Bhaskar Raju, G and Keerthi, Ramachandra and Latha, S S and Prabhakar, S (2011) Degradation of dyes by UV/O3/H2O2 and Electro-oxidation techniques. Water Practice & Technology, 6 (2). pp. 1-9.

Bhattacharjee, G and Das, Avimanyu (2011) Benefication of Low Grade Iron Ore. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Bhattacharya, Madhusmita (2011) Isolation and purification of bacteria from bauxite and iron ore mine samples. Masters thesis, National Metallurgical Laboratory (NML).

Bhattacharya, S and Mallik, D and Nayar, S (2011) Comparative Study of Biomimetic Iron Oxides Synthesized Using Microwave Induced and Conventional Method. IEEE Transactions on Magnetics, 47 (6). pp. 1647-1653.

Bhattacharyya, A S and Mishra, Suman K (2011) Micro/nanomechanical behavior of magnetron sputtered Si-C-N coatings through nanoindentation and scratch tests. Journal of Micromechanics and Microengineering, 21 (1). 015011.

Bhattacharyya, P and Singh, Ratnakar (2011) Generation of Value Added Product by Beneficiation of Barite Waste. In: Conference Proceedings on XII Internation Conference on Mineral Processing Technology MPT-2011, October 20-22, 2011, Udaipur, India.

Biswas, Somjeet and Singh, Satyaveer D and Suwas, Satyam (2011) Microstructure and texture evolution of Pure magnesium during ecae. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Brahma, P and Dutta, S (2011) Novel transport properties of nanostructured α-Fe2O3. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Bui, Q V and Nam, N D and Yoon, J W and Choi, D H and Kar, Abhijit and Kim, J G and Jung, S B (2011) Effect of Gold on the Corrosion Behavior of an Electroless Nickel/Immersion Gold Surface Finish. Journal of Electronic Materials, 40 (9). pp. 1937-1942.

Calla, O P N and Rathore, Inder Singh (2011) Complex dielectric constant measurement of glass epoxy and zinc oxide at temperature ranging from -1960C to +2000C at microwave frequencies. Journal of Metallurgy and Materials Science, 53 (2). pp. 161-173.

Chaira, D and Mishra, B K and Sangal, S (2011) Synthesis and characterization of nanocrystalline carbides By reaction milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chakraborty, Jay and Kumar, Kishor and Ranjan, Rajeev and Ghosh Chowdhury, S and Singh, S R (2011) Thickness-dependent fcc–hcp phase transformation in polycrystalline titanium thin films. Acta Materialia, 59 (7). pp. 2615-2623.

Chakraborty, M (2011) Chemical Synthesis and Characterization of Nickel Powder. Metallurgical and materials transactions B-Process metallurgy and materials processing science, 42 (2). pp. 380-384.

Chakraborty , G and Pal, T K and Palit Sagar, S and Parida , N (2011) Non Destructive Characterization Of Resistance Spot Welded Joints By Ultrasonic Technique. Indian Welding Journal, 44 (1). pp. 30-36.

Chatterjee, A and Srikanth, S and Sanyal, S and Krishna, L and Anand, K and Subramanian, P R (2011) Kinetic Modeling of High Temperature Oxidation of Ni-base Alloys. Computational Materials Science, 50(3) (1.458 (SCI)). pp. 811-819.

Chatterjee, Anjan K (2011) Enhancing the potential of industrial use of the Indian fly ashes through echano-chemical activation – prospects and problems. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chaubey, A K and Mishra, B K and Mukhopadhyay, N K and Mukherjee, P S (2011) Effect of compact density and preheating temperature of the Al-Ti-C Preform on the fabrication of in-situ Mg–TiC composites. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chauhan, Sandeep Kumar and Soni, P R (2011) Development of 2024 p/m aluminium alloy–SiCp nanocomposites via mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chennakesavulu, K and Basariya, M R and Bhaskar Raju, G and Prabhakar, S (2011) Study on thermal decomposition of calix[6]arene and calix[8]arene. Journal of Thermal Analysis and Calorimetry, 103 (3). pp. 853-862.

Chennakesavulu, K and Basariya, M R and Sreedevi, P and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2011) Study on thermal decomposition of calix[4]arene and its application in thermal stability of polypropylene. Thermochimica Acta, 515 (1-2). pp. 24-31.

Chi, Tran D and Lee, Jae-chun and Pandey, B D and Jeong, Jinki and Yoo, Kyoungkeun and Huyunh, Trung Hai (2011) Bacterial Cyanide Generation in Presence of Metal Ions (Na+, Mg2+, Fe2+, Pb2+) and Gold Bioleaching from Waste PCBs. Journal of Chemical Engineering of Japan, 44(10) (0.442 (SCI)). pp. 692-700.

Chi, Tran D and Lee, Jae-chun and Pandey, B D and Yoo, Kyoungkeun and Jeong, Jinki (2011) Bioleaching of gold and copper from waste mobile phone PCBs by using a cyanogenic bacterium. Minerals Engineering, 24 . pp. 1219-1222.

Choudhury, Samrat Sen and Bhattacharjee, S (2011) Application of an aqueous nanometric aluminum oxide suspension for fluoride remediation. Journal of Metallurgy and Materials Science, 53 (4). pp. 355-367.

Csőke, B and Mucsi, G and Sík, Cs (2011) Production and practical application of mechanically activated fly ash-based binding material. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Daroonparvara, M R and Mazar Atabaki, M and Vakilipour, A (2011) Corrosion behavior of heat treated nickel-aluminium bronze alloy in artificial seawater. Journal of Metallurgy and Materials Science, 53 (1). pp. 67-84.

Das, Anindya (2011) High Strain Rate Tensile Deformation of Low Carbon Steels (OLP-0160). Masters thesis, National Metallurgical Laboratory (NML).

Das, Arpan and Chakraborti, P C and Tarafder, S and Bhadeshia, H K D H (2011) Analysis of deformation induced martensitic transformation in stainless steels. Materials Science and Technology, 27 (1). pp. 366-370.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2011) Connection between deformation-induced dislocation substructures and martensite formation in stainless steel. Philosophical Magazine Letters Online ISSN 1362-3036, 91 (10). pp. 664-675.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2011) Morphologies and characteristics of deformation induced martensite during low cycle fatigue behaviour of austenitic stainless steel. Materials Science and Engineering A, 528 (27). pp. 7909-7914.

Das, Arpan and Tarafder, S and Chakraborti, P C (2011) Estimation of deformation induced martensite in austenitic stainless steels. Materials Science and Engineering A, 529 (1). pp. 9-20.

Das, Avimanyu and Singh, Ratnakar and Bhattacharyya, K K (2011) Split Processing of High Ash Indian Coking Coal Fines Using Jameson Flotation Cell. Mineral Processing and Extractive Metallurgy Review, 32(1) (0.611 (SCI)). pp. 17-23.

Das, Mousumi and Das, Goutam (2011) Role of dynamic precipitation on the strengthening mechanism of cryorolled 6063 Al alloy. Transactions of the Indian Institute of Metals, 64 (1-2). pp. 75-79.

Das, Suchandan K (2011) Application of a stochastic modelling framework to characterize the influence of different oxide scales on the solid particle erosion behaviour of boiler grade steel. Sadhana, 36 (4). pp. 425-440.

Das, Suchandan K (2011) Mathematical Modelling of Carbonisation Process in Stamp Charged Coke ovens. In: International Conference on Coal & Coke - 2011, April 7-8, 2011, Tata Steel, Jamshedpur, India.

Das, Suchandan K and Bhattacharyya, K K and Singh, Ratnakar (2011) Optimized Neural Network Model to Characterize the Effects of Process Parameters on the Separation Efficiency of Iron Ore by a High Intensity Magnetic Separator. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India.

Das, Suchandan K and Kumari, Amrita and Bandopadhay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furna. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Das, Suchandan K and Kumari, Amrita and Bandyopadhyay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furnace. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Datta, A K and Mandal, D and Sahoo, K L (2011) Measuring uncertainties of metal working processes in computational simulations : A novel approach. Journal of Metallurgy and Materials Science, 53 (2). pp. 183-187.

Deshmukh, Rajesh D and Humane, M M (2011) XRD Analysis of Cold Rolled and Annealed High Strength-Formable Steel Sheets. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Deshpande, Pravin P and Vagge, Shashikant T and More, Mahendra A and Kelkar, Sarika A (2011) Galvano static deposition of conducting poly (o-toluidine -co-o-anisidine) coating on low carbon steel and its corrosion performance. Journal of Metallurgy and Materials Science, 53 (3). pp. 269-274.

Dey, Shobhana and Mohanta, M K and Bhattacharyya, K K and Bhagat, R P and Rao, K V and Singh, Ratnakar and Das, Avimanyu and Mehta, K D and Alex, T C and Mohanty, Sunati and Singh, Ranjeet K (2011) Beneficiation and pelletisation of lateritic iron ore from Kahnwara, Katni. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Dey, Shobhana and Mohanta, M K and Mohanty , Sunati and Goswami , M C and Bhattacharyya, K K (2011) Amenability to Processing of Maganiferous Iron Ore. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Dey, Shobhana and Pani, Santosh and Sharma, Mamta and Das, Avimanyu (2011) Advanced Coal Cleaning Technology for Challenges in Near future. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Dhal, B and Das, N N and Pandey, B D and Thatoi, Hruayanath (2011) Environmental Quality of the Boula-Nuasahi Chromite Mine Area in India. Mine Water and the Environment, 30 (3). pp. 191-196.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2011) Bioremediation of CR(VI) from Contaminated Chromite Mine Overburden Soil and its Management. In: 15th International Conference on Nonferrous Metals 2011, 8-9 July 2011, Kolkata,India.

Dhal, B and Mehta, K D and Das, N N and Thatoi, Hruayanath and Pandey, B D (2011) Native fungal isolates for biosorption of Cr(VI): A potential approach for treatment of chromite mine drainage. In: Proceedings of National Seminar on Environmental Management in Metallurgical Industries (EMMI-2010). Allied Publishers Pvt. LtD, BHU Var, pp. 67-71. ISBN 978-81-8424-728-2

Dhayal, Ashok Kumar and Pramanick, A K (2011) Oxide Layer Formation on Al-Si-Zr Alloy using Anodizing process. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Director, NML (2011) Annual Report 2010-2011. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2011) Director's Desk - 60th RC Meeting of CSIR-NML. CSIR-National Metallurgy Laboratory, Jamshedpur.

Director, NML (2011) Director's Desk - 60th RC Meeting of CSIR-NML (Hindi Version). CSIR-National Metallurgy Laboratory, Jamshedpur.

Director, NML (2011) Director's Desk: 59th RC Meeting of CSIR-NML. National Metallurgy Laboratory, Jamshedpur, Jamshedpur.

Director, NML (2011) la vintage metallurgie : 60 years of marriage of science to industry. In: la vintage metallurgie. National Metallurgical Laboratory, Jamshedpur, pp. 1-416.

Dlouhy, Ivo and Tarafder, Mita and Hadraba, Hynek (2011) Micromechanical Aspects of Transgranular and Intergranular Failure Competition. Key Engineering Materials , 465 (1.00 (SCI)). pp. 399-402.

Dutta, Abinash (2011) Biomimetic synthesis and characterization of calcium silicate and hydroxyapatite nanoparticles from natural sources (Rice husk ash and Mollusc shell). Masters thesis, CSIR-National Metallurgical Laboratory.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Decreased chromia growth during isothermal and cyclic oxidation tests at 700ºC. Journal of Metallurgy and Materials Science, 53 (2). pp. 211-215.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Electrical conductivity of interconnects in presence of two manganese spinel coatings. Journal of Metallurgy and Materials Science, 53 (4). pp. 405-410.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Improved oxidation resistance of coated interconnects at 700ºC. Journal of Metallurgy and Materials Science, 53 (1). pp. 97-102.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) The influence of Mn spinel coatings on electrical conductivity of Fe-17%Cr alloy. Journal of Metallurgy and Materials Science, 53 (3). pp. 311-317.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) The influence of MnCo2O4, CoCr2O4, CoFe2O4 and Co3O4 spinels on the thickness of chromia scale during two types of oxidation tests. Journal of Metallurgy and Materials Science, 53 (2). pp. 205-209.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Investigation on parabolic rate constant in presence of MnCo2O4, CoCr2O4, CoFe2O4 and Co3O4 coatings at 700ºC. Journal of Metallurgy and Materials Science, 53 (3). pp. 305-309.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Manganese deposition of high temperature ferritic stainless steel interconnects. Journal of Metallurgy and Materials Science, 53 (4). pp. 419-425.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Reduced electrical resistance of interconnects presence of Mn3O4 and MnFe2O4. Journal of Metallurgy and Materials Science, 53 (1). pp. 103-108.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2011) Studies on electrical resistance activation energy in presence of cobalt spinels. Journal of Metallurgy and Materials Science, 53 (3). pp. 319-324.

Elena , V. Boldyreva (2011) Mechanochemistry of organic solids: where are we now? In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Fabián, Martin and Baláž, Peter and Briančin, Jaroslav (2011) Study of the silver ions cementation after mechanical activation of cementator. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Fashu, Simbarashe and Li, Jianguo and Dan, Hu Qiao (2011) Purification of an industrial aluminum alloy by melt stirring during Ohno continuous casting process. Journal of Metallurgy and Materials Science, 53 (1). pp. 55-65.

Foct, Jacques (2011) Specifics of mechanically driven atomic distributions In interstitial alloys. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Friščić, T and Jones, W (2011) Development of liquid-assisted grinding (LAG) for the synthesis of hydrogen-bonded and coordination frameworks. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Gangopadhyay, A K and Sahoo, K L and Kelton, K F (2011) Importance of solute-solute interactions on glass formability. Philosophical Magazine, 91 (17). pp. 2186-2199.

Gazder, Azdiar A and Florian, H Dalla Torre and Christopher, H J Davies and Pereloma, Elena V (2011) The microstructure, texture and mechanical properties of AS-ECAE Interstitial-free steel and copper. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghali, Venkata Subbarao and Mulaveesala, Ravibabu (2011) Recent Advances in Non-stationary Thermal Non-destructive Characterization. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Ghorai, Tanmay K and Pramanik, Panchanan (2011) Mechanochemical synthesis, characterization and photocatalytic Properties of M2O3/TiO2 (M = Fe, Mn) nano-composite under visible light. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghosh, M and Husain, M M and Das, Goutam and Das, S K and Upadhyay, A K and Singh, S R and Parida, N (2011) Metallurgical Analysis:Flying Accident to Mig-27 ML TS - 579. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V and Das, S K and Ray, Ajoy K (2011) Evaluation of interface microstructure for friction stir welded aluminium-stainless steel plate. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghosh, M and Kumar, K and Mishra, R S (2011) Friction stir lap welded advanced high strength steels: Microstructure and mechanical properties. Materials Science and Engineering A, 528 . pp. 8111-8119.

Ghosh, Sourov and Sahu, Ranjan K and Raj, C Retna (2011) Shape-regulated high yield synthesis of electrocatalytically active branched Pt nanostructures for oxygen reduction and methanol oxidation reactions. Journal of Materials Chemistry, 21 (32). pp. 11973-11980.

Ghosh , M and Husain, M M and Das, Goutam and Das, S K and Upadhyay, A K and Singh, S R and Parida, N (2011) Metallurgical Analysis : Ground Incident to MIG-27 ML TS-615. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Ghosh Chowdhury, S and Gubicza, Jeno and Mahato, B and Chinh, Nguyen Q and Hegedus, Zoltan and Langdon, T G (2011) Texture evolution during room temperature ageing of silver processed by equal-channel angular pressing. Scripta Materialia, 64 (11). pp. 1007-1010.

Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and Singh, Raghuvir (2011) Influence of Processing on Texture, Grain Boundary Structure and Corrosion Behaviour of Austenitic Stainless Steels. Steel Tech, 5 (4). pp. 43-57.

Goswami, B and Kumar, S B and Ray, Ashok K (2011) Perspectives of developments in nickel based allied systems. Journal of Metallurgy and Materials Science, 53 (3). pp. 233-252.

Goswami, B and Ray, Ashok K (2011) Emerging trends in plasticity and precipitation of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 53 (1). pp. 1-23.

Goswami, B and Ray, Ashok K (2011) Emerging trends of alloy and composite formation in Al-Li-X alloys. Journal of Metallurgy and Materials Science, 53 (2). pp. 109-131.

Goswami, B and Ray, Ashok K (2011) Perspectives of innovations in superalloys for gas turbines. Journal of Metallurgy and Materials Science, 53 (4). pp. 325-347.

Goudar, D M and Rudrakshi, G B and Srivastava, V C (2011) Microstructures and Mechanical properties of Spray deposited and Heat-treated Al-25Mg2Si-2Cu alloy. Innovative Systems Design and Engineering, 2 (6). pp. 72-85.

Goudar, D M and Rudrakshi, G B and Srivastava, V C and Reddy, J and Joshi, A G (2011) Spray Deposition Process of Hypereutectic Al – Si alloys: An overview. International Journal of Scientific and Engineering Research, ISSN 2229-5518, 2 (6). pp. 1-10.

Grosdidier, T and Ji, G and Llorca, N (2011) On the processing of dense hetero-nanostructured metallic materials for improved strength / ductility balance by ecae and sps methods. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, CSIR-NML, Jamshedpur.

Guha, Avijit and Sinha, Arvind (2011) Surface Mineralization of Hydrogels Through Octacalcium Phosphate. International Journal of Applied Ceramic Technology , 8 (3). pp. 540-546.

Gupta, Siddhi and Webster, T J and Sinha, Arvind (2011) Evolution of PVA gels prepared without crosslinking agents as a cell adhesive surface. Journal of Materials Science:Materials in Medicine, 22 (7). pp. 1763-1774.

Gurevich , B I and Kalinkin, A M and Kalinkina, E V and Kalinnikov, V T (2011) Utilization of ferrous-magnesium slag for production of binding materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Hansdah, Kirtal (2011) Optimisation of parameters for biosorption of trivalent chromium from model tannery effluent using penicillium species. Masters thesis, National Metallurgical Laboratory (NML).

Hao, X J and Yin, W and Strangwood, M and Peyton, A and Dickinson, S J and Morris, P F and Davis, C L (2011) Monitoring of Steel Microstructures using Electromagnetic Sensors. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Haxhiaj, A and Rama, M and Krasniqi, N and Haxhiaj, E (2011) The management of the melting process of electrical furnaces in Drenas. Journal of Metallurgy and Materials Science, 53 (3). pp. 253-260.

Himadri, Roy (2011) Monotonic and cyclic fracture behaviour of AISI 304LN stainless steel. PhD thesis, Indian Institute of Technology, Kharagpur.

Hoang, L L and Jeong, Jinki and Lee, Jae-chun and Pandey, B D and Yoo, Jae-Min and Trung, H H (2011) Hydrometallurgical Process for Copper Recovery from Waste Printed Circuit Boards (PCBs). Mineral Processing and Extractive Metallurgy Review, 32 (2). pp. 90-104.

Hore, S and Das, Suchandan K and Bhattacharyya, K K and Singh, Ratnakar (2011) Data-Based Performance Modelling of Hydrocyclone for Processing Iron Ore Fines. In: International Seminar on Mineral Processing Technology (MPT-2011), Oct 20, 2011, Udaipur, India.

Hore, S and Ghosh, R N (2011) Computer simulation of the high temperature creep behaviour of Cr–Mo steels. Materials Science and Engineering A, 528 (19-20). pp. 6095-6102.

Humane, M M and Minj, R K and Peshwe, D R and Paretkar, R K (2011) Texture and Formability of One-Step and Two-Step Cold-Rolled and Annealed Interstitial Free High-Strength Steel Sheets. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 42A (6). pp. 1692-1708.

Husain, M M and Munda, Parikshit and Prakash, Amit and Parida, N and Singh, S R (2011) Identification of bomb scraps from Srimohangarh (Rajasthan)(TMP-0172). Other (TMP). National Metallurgy Laboratory, Jamshedpur, Jamshedpur. (Submitted)

Hussain, Zuhailawati and Yusoff, Mahani (2011) In-situ formation of NbC in mechanically alloyed Cu-Nb-C At different temperatures. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Jadayil, Anu and Wisam, M (2011) Solidification time effects on surface and subsurface aluminum casting defects. Journal of Metallurgy and Materials Science,, 53 (1). pp. 41-54.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2011) Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution – Long term evaluation by EIS. Corrosion Science, 53 . pp. 645-654.

Jayakumar, T and Kumar, Anish (2011) Nondestructive Evaluation of Microstructure and Stresses in Steels. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Jena, B K and Sahu, S C and Satpati, B and Sahu, Ranjan K and Behera, D and Mohanty, S (2011) A facile approach for morphosynthesis of Pd nanoelectrocatalysts. Chemical Communications, 47 (13). pp. 3796-3798.

Jha, Amrita Kumari and Kumari, Archana and Choubey, Pankaj K and Kumar, Vinay and Jha, Manis K (2011) Waste lithium ion batteries - An alternative resource to recover lithium and cobalt. Journal of Metallurgy and Materials Science, 53 (3). pp. 225-231.

Jha, Manis K and Choubey, Pankaj K and Kumari, Archana and Kumar, Rakesh and Kumar, Vinay and Lee, Jae-chun (2011) Leaching of lead from solder material used in electrical and electronic equipment. In: Proceedings of second symposium on Recycling of waste II, 2011, Recycling of waste II.

Jha, Manis K and Kumar, Abhishek and Kumar, Vinay and Lee, Jae-chun (2011) Prospective scenario of e-waste recycling in India. In: Proceeding of Second Symposium On Recycling of Electronic Waste II, 2011, Recycling of waste II.

Jha, Manis K and Lee, Jae-chun and Kumari, Archana and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki (2011) Pressure leaching of metals from waste Printed Circuit Boards using sulphuric acid. Journal of Metals, 63 (8). pp. 29-32.

Joshi, R M and Thimmaiah, K S and Deshpande, R V and Maheshwari, M D (2011) Nondestructive Evaluation of Weld seam Failures in Tubes and Other Structures for Thermal, Wind and Nuclear Power Applications. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Kailath, A J and Dutta, K and Alex, T C and Mitra, A (2011) Crystallization Study of Cu56Zr7Ti37 Metallic Glass by Electrical Resistivity Measurement. Journal of Materials Science and Technology, 27 (3). pp. 275-279.

Kalinkin, A K (2011) Mechanosorption of Co2 by silicates: mechanism, kinetics and possible applications. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kalinnikov, V T and Krasheninnikov, O N and Belogurova, T P (2011) Mining waste utilization in the production of building materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kaloshkin, S D and Ergin, K S and Tcherdyntsev, V V and Maksimkin, A V and Petrzhik, M I and Antipov, E M and Gerasin, V A (2011) Structure and propertties of ball milled utrahigh-molecular weight Polyethylene - clay composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kaloshkina, Sergey and Churyukanovaa, Margarita and Zadorozhnyia, Vladislav and Shchetinina, Igor and Roy, Rajat K (2011) Curie temperature behaviour at relaxation and nanocrystallization of Finemet alloys. Journal of Alloys and Compounds, 509 (Suppl 1). S400-S403.

Kaloshkina, Sergey and Romankov, Sergey and Komarov, Sergey and Kaevitser, Ekaterina (2011) Intermetallic coatings produced by mechanical alloying method. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kalshetty, Shivanand and Basavaraja, S and Bedre, Mahesh D and Deshpande, Raghunandan and Venkataraman, A (2011) Synthesis and characterization of SnO2 by alginate template method. Journal of Metallurgy and Materials Science, 53 (2). pp. 175-181.

Kante, Murali and Reddy, Rama Koti and Ghali, Venkata Subbarao and Mulaveesala, Ravibabu (2011) Frequency Modulated Infrared Imaging for Non-Destructive Testing of Steel Materials. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Kaushik, Rahul K and Sahu, J K (2011) Tensile behaviour of metallic materials and alloys. Training Report (TR). National Metallurgy Laboratory, Jamshedpur.

Ketegenov, T and Urakaev, F (2011) Influence of thickness of coated layer on parameters and kinetics of mechanical activation (example of quartz processing). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Jeong, Jinki and Pandey, B D (2011) Leaching kinetics of copper from waste printed circuit boards by electro-generated chlorine in HCl solution. Hydrometallurgy, 107 (3-4). pp. 124-132.

Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Pandey, B D (2011) Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process. Journal of Hazardous Materials, 198 . pp. 206-215.

Kishore, Braj and Jha, Manis K and Kumar, Vinay (2011) Recovery of Nd from Nd-Fe-B magnet scrap of computer Hard Disk Drive. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Klimenov, Vasiliy A and Kroning, Michael and Kroning, Paul and Mohr, Friedrich and Reddy, K M and Wolf, Helmut (2011) NDT Controlled Production in Steel Industry. In: Proceedings of International Conference on Nondestructive Evaluation for Steel and Allied Industries - NDESAI, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Kodge, Anil Kumar and Kalyane, Sangshetty and Lagashetty, Arun Kumar (2011) Synthesis and characterization of polyvinyl alcoholcobalt oxide nanocomposite film. Journal of Metallurgy and Materials Science, 53 (4). pp. 387-392.

Konstanchuk, I and Gerasimov, K and Bobet, J -L (2011) Mechanically alloyed magnesium-based materials For hydrogen storage. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kosenko, N and Vinogradova, L and Filatova, N and Smirnova, M (2011) The mechanical treatment as a method of Inorganic substances passive. In: International Conference on Mechanochemistry and Mechanical Alloying, 1-4 December 2008, CSIR-NML, Jamshedpur.

Krishna, K Gopala and Singh, Nidhi and Venkateswarlu, K and Kumar, K C Hari (2011) Tensile Behavior of Ultrafine-Grained Al-4Zn-2Mg Alloy Produced by Cryorolling. Journal of Materials Engineering and Performance, 20 (9). pp. 1569-1574.

Kulikova, M P and Kaminskii, Yu D (2011) Influence of mechanical activation on alkylation and extractability of coal. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, M Ashok and Reddy, G Ramachandra and Reddy, G Harinatha and Reddy, N Subbarami and Reddy, K Hemachandra and Reddy, Y V Mohana (2011) Mechanical properties of randomly oriented short Sansevieria trifasciata fibre/epoxy composites. Journal of Metallurgy and Materials Science, 53(1) . pp. 85-95.

Kumar, M Ashok and Reddy, G Ramachandra and Reddy, G Harinatha and Reddy, K Hemachandra and Reddy, Y Venkata Mohana (2011) Fabrication and performance of hybrid betel nut (Areca catechu), short fiber (Sansevieria cylindrica : Agavaceae) epoxy composites. Journal of Metallurgy and Materials Science, 53 (4). pp. 375-386.

Kumar, Manoj and Awasthi, R and Pramanick, A K and Singh, R N (2011) New ternary mixed oxides of Fe, Ni and Mo for enhanced oxygen evolution. International Journal of Hydrogen Energy, 36 (20). pp. 12698-12705.

Kumar, Manoj and Yoo, Kyoungkeun and Kim, Min-seuk and Jeong, Jinki and Lee, Jae-chun (2011) Leaching of metals from waste printed circuit boards(PCBS) by sulphuric acid in the presence of hydrogen peroxide and nitric acid. The Banaras Metallurgist, 16 . pp. 141-148.

Kumar, R Sandeep and Joshi, Deepa and Kumar, Yudhisther and Gupta, Reeta and Kumar, Ashok (2011) EMAT Based Ultrasonic System for Determination of Thickness Variation in Metallic Samples. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Kumar, Raj and Jha, Manis K and Kumar, Vinay (2011) Solvent Extraction of Cu/Li from the Leach Liquor of Spent Batteries of used Electronic devices. Training Report (TR). National Metallurgical Laboratory, Jamshedpur. (Unpublished)

Kumar, Raj and Kumar, Vinay and Jha, Manis K (2011) Solvent Extraction of Cu/Li from the Leach Liquor of Spent Batteries of used Electronic devices. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2011) Mechanical activation in blended cement processing. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Sanjay and Kumar, Rakesh (2011) Mechanical activation of fly ash: Effect on reaction, structure and properties of resulting geopolymer. Ceramics International, 37 (2). pp. 533-541.

Kumar, Sanjay and Kumar, Rakesh and Mehrotra, S P (2011) Geopolymers, fly ash reactivity and mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Vinay and Hosmani, Santosh S (2011) The effect of temperature and cooling-rate on packcarburized iron. Journal of Metallurgy and Materials Science, 53 (4). pp. 393-404.

Kumari, Anita and Jana, R K (2011) Comparison of Leaching Rates of Metals in Presence of Different Buffering Agents in Sodium Chloride Media. International Journal of Chemical Engineering Research, 3 (3). pp. 171-179.

Kumari, Anita and Jana, R K (2011) Kinetic Study on Extraction of Valuable Metals in Sodium Chloride Solution with Organic Acid Addition. International Journal of Chemical Engineering Research, 3 (2). pp. 97-105.

Kumari, Chitra and Nayar, S (2011) Biomimetic synthesis of aqueous ferrofluids using different polymers (STR). Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

Kumari, Manorama (2011) Studies on isolation of micro-organisms from soil sample and their tolerance with metal ions. Masters thesis, National Metallurgical Laboratory (NML).

Kushwaha, Jyoti and Agrawal, A and Upadhyay, A K and Mankhand, T R and Sahu, K K (2011) Recovery of Molybdenum from Spent HDs Catalyst Leach Liquor by Solvent Extraction using Aliquat 336. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India.

Lahiri, B B and Bagavathiappan, S and Saravanan, T and Rajkumar, K V and Kumar, Anish and Philip, John and Jayakumar, T (2011) Defect Detection in Weld Joints by Infrared Thermography. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Lee, Jae-chun and Kim, Eun-young and Kim, Ji-Hye and Kim, Wonbaek and Kim, Byung-Soo and Pandey, B D (2011) Recycling of WC–Co hardmetal sludge by a new hydrometallurgical route. International Journal of Refractory Metals and Hard Materials, 29 (3). pp. 365-371.

Lee, Jin-Young and Jha, Amrita Kumari and Kumari, Archana and Kumar, J Rajesh and Jha, Manis K and Kumar, Vinay (2011) Neodymium recovery by precipitation from synthetic leach liquor of concentrated rare earth mineral. Journal of Metallurgy and Materials Science, 53 (4). pp. 349-354.

Lee, Kwang Seok (2011) Recovery of rare earth metal neodymium (Nd) as value added product from scrap hard disc of personal computer (PC). Masters thesis, Korea Maritime University, South Korea.

Lee, Taejong and Lee, Soowhan and Kim, Nohyu and Lim, Jongsoo (2011) Thermo-graphic Detection of Surface Cracks. In: Proceedings of the International Conference on Nondestructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Lenka, Suvendu (2011) Basic Technique, Limitation and Application of Guided Waves, Phased Array and Electro-Magnetic Acoustic Transducer(EMAT). In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Linol, Julie and Martinetto, Pauline and Anne, Michel and Coquerel, Gérard (2011) On the existence of a dynamic critical point by using wet milling on (±) modafinil. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Liu, J and Zhou, L and Hao, X J and Strangwood, M and Peyton, A and Morris, P F and Davis, C L (2011) Non-destuctive Evaluation of Power-Generation Steel Microstructure Changes Using Electromagnetic Sensors. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries NDESAI - 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Maity, S K and Kawalla, R (2011) Ultrahigh Strength Steel: Development of Mechanical Properties Through Controlled Cooling. In: Heat Transfer - Engineering Applications. InTech , Croatia, pp. 309-336. ISBN 978-953-307-361-3

Mallar, Ray and Bandopadhyay, N R and Ghanta, Ujjwal and Klie, Robert F and Pramanick, A K and Das, Samaresh and Ray, Samit K and Hossain, S M (2011) Temperature dependent photoluminescence from porous silicon nanostructures: Quantum confinement and oxide related transitions. Journal of Applied Physics, 110 (9). p094309-1-p094309-8.

Mallik, D and Mir, Aparna and Bhattacharya, S and Nayar, S (2011) Fluorimetric assay of interaction of protein with ferrofluids. Spectrochimica Acta Part A-Molecular And Biomolecular Spectroscopy , 78 (1). pp. 332-336.

Mandal, C and Mishra, A K and Prasad, R R and Avtar, Ram and Mukerjee, D (2011) A non destructive method to detect the incipient fault in rolling element bearing. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Mandal, G K and Das, Suchandan K and Balasubramaniam, R and Mehrotra, S P (2011) Evolution of microstructures of galvanised and galvannealed coatings formed in 0.2 wt-% aluminium–zinc bath. Materials Science and Technology, 27 (8 ). pp. 1265-1270.

Mandal, S K (2011) Study of process dynamics in Floatex density separator based on computational intelligent vision. International Journal of Computational Vision and Robotics, 2 (4). pp. 314-322.

Meena, Harikesh and Hembram, Khelaram and Singh, S D (2011) Study Of Metal Extraction and Forming. Training Report (TR). National Metallurgical Laboratory, Jamshedpur, Jamshedpur.

Mehta, K D (2011) Role of Pyrite in Selective Bioleaching of Metals from a Complex Sulphide Concentrate. In: Conference Proceedings on XII International Conference on Mineral Processing Technology MPT - 2011, October 20-22, 2011, Udaipur, India.

Mehta, K D and Kumar, Rakesh and Pandey, B D and Mehrotra, S P (2011) Bio-dissolution of metals from activated nodules of Indian Ocean. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Metya, Avijit Kumar and Bar, H N and Parida, N and Das, S K (2011) Failure Analysis of Ball Clevis of 320KN Hardware Fittings. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Metya, Avijit Kumar and Rajnikanth, V and Prakash, Amit and Das, S K (2011) Failure Analysis of Compressor Blade of SU-30MKI(SB-142). Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Metya, Avijit Kumar and Rajnikanth, V and Prakash, Amit and Parida, N (2011) Metallurgical Analysis of 1st Stage LPC Compressor Blade of SU-30 MKI SB-062 (No.25). Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Mishra, Asit Kumar and Nayak, B (2011) Characterization and liberation studies of kiriburu low grade iron ore. Training Report (TR). NML, Jamshedpur. (Submitted)

Mishra, D and Perumal, A and Srinivasan, A (2011) Composition dependent properties of mechanically alloyed amorphous Fe-Zr-B powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mishra, D and Srivastava, R R and Sahu, K K and Singh, T B and Jana, R K (2011) Leaching of roast-reduced manganese nodules in NH3 – (NH4)2CO3 medium. Hydrometallurgy, 109 (3-4). pp. 215-220.

Mishra, Navya and Sinha, Arvind and Nayar, S (2011) Synthesis of ferrofluids with collagen as a template-Biomolecular matrix mediated synthesis of ferrofluids. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

Mishra, Suman K and khusboo, and Sherbacov, V (2011) Fabrication of in-situ Ti–Si–C fine grained composite by the self propagating high temperature synthesis (SHS) process. International Journal of Refractory Metals and Hard Materials, 29 (2). pp. 209-213.

Mishra, T and Mahato, M and Aman, Noor and Patel, J N and Sahu, Ranjan K (2011) A mesoporous WN co-doped titania nanomaterial with enhanced photocatalytic aqueous nitrate removal activity under visible light. Catalysis Science & Technology, 1 (4). pp. 609-615.

Mitra, A and Roy, Rajat K and Mahato, B and Panda, A K and Vlasak, G and Janickovic, D and Svec, S P (2011) Development of FeSiB/CoSiB Bilayered Melt-spun Ribbon by Melt-spinning Technique. Journal of Superconductivity and Novel Magnetism, 24(5) . pp. 611-615.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2011) Nanostructured Materials Research at NML. Nano Digest, 3 (4-5). pp. 30-32.

Mohanta, M K and Rath, R K and Sharma, Mamta and Soreng, D R and Mohanty, Sunati and Singh, Ranjeet K and Singh, Ratnakar (2011) Characteristics of Iron Ore Slime from Kiriburu, India. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.

Mohanta, Ojaswini (2011) Development of Co-Fe Based Nanostructured Soft Magnetic Materials for High Temperature Applications. PhD thesis, Bengal Engineering and Science University, Shibpur, Howrah.

Mohanty, Sunati and Singh, Ratnakar and Bhattacharyya, P and Bhattacharyya, K K (2011) Processing of Fine Grained Iron Ore and Coal Samples Using Multi-Gravity Separator. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Mondal, B N and Basumallick, A and Chattopadhyay, P P (2011) The magnetic behavior of Cu-Ni-Co-Fe quaternary alloys prepared by Mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mude, Rupla Naik and Panda, Soma Sekhara Balaji and Ghali, Venkata Subbarao and Muniyappa, Amarnath and Mulaveesala, Ravibabu (2011) Coded Excitation for Infrared Non-destructive Testing of Steel Materials. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries -NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Muduli, S D and Nayak, B D and Rao, D S and Mishra, B K (2011) Immobilization of CR (VI) in ferrochrome flue dust. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Mukherjee, K and Prakash, S (2011) Cold Simulation of momentum transfer of a metal droplet falling through slag systems possessing net-work structured fluids. Chemical Engineering Science, 66 (6). pp. 1027-1037.

Mukherjee, R and Sahu, T and Sen, S and Sahu, Puspendu (2011) Structural and microstructural evolution due to increasing Co substitution in Ni1−xCoxFe2O4: An X-ray diffraction study using the Rietveld method. Materials Chemistry and Physics, 128 (3). pp. 365-370.

Mukherjee, R and Verma, S and Mohanty, B D and Rao, S Mohan and Suresh Kumar, T S (2011) Integration of iron ore deposit evaluation and mine plan for selecting cost effective beneficiation operations towards improved resource utilisation: Experience at Tata Steel. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Mukhopadhyay, N K (2011) Synthesis of nanocrystalline and amorphous phases in complex metallic alloys during mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mukhopadhyay, N K and Ali, F and Srivastava, V C and Yadav, T P (2011) Strain-induced structural transformation of single-phase Al-Cu-Fe icosahedral quasicrystal during mechanical milling. Philosophical Magazine, 91 (19-21). pp. 2482-2490.

Mulas, G and Delogu, Francesco (2011) Estimation of mechanochemical effects in heterogeneous processes. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Munda, Parikshit and Das, Swapan K and Husain, M M and Ghosh Chowdhury, S and Parida, N (2011) Failure Investigation of 1st Stage LPCR Blade Pertaining to Aero-Engine No. 8831010. Other (TMP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Munda, Parikshit and Das, Swapan K and Prakash, Amit and Ghosh Chowdhury, S and Parida, N (2011) Failure Investigation of 1st Stage Rotor Blade Pertaining to Aero-Engine No. HDR-80086U. Other (TMP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Munda, Parikshit and Metya, Avijit Kumar (2011) Metallurgical Investigation on the Effect of BZL Welding of LPTR Blase Shrouded Tips of Aero Engines. In: International Seminar on Emerging Trends in Repair & Reclamation Technologies on Aero Engine Parts, Nov. 18 2011, Aeronautical Society of India, Chandigarh Branch.

Murmu, Laxmi and Ghosh Chowdhury, S and Gunjan, M K (2011) Project report on Microstructural Evolution of Ultra Fine Grained C-Mn Steel warm Rolling and Inter-Critical Annealed. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Murthy, G V S and Das, Goutam and Das, Swapan K and Praveen, Nikhat and Singh, S R (2011) Hardbanding failure in a heavy weight drill pipe. Engineering Failure Analysis, 18 (5). pp. 1395-1402.

Murugananthan, M and Bhaskar Raju, G and Yoshihara, S (2011) Treatment of pharmaceutically active compounds by electrooxidation using boron doped diamond and platinum anodes. In: Hazardous Materials: Types, Risks and Control. Nova Science Publishers, Inc, USA, pp. 379-395.

Murugananthan, M and Latha, S S and Bhaskar Raju, G and Yoshihara, S (2011) Role of electrolyte on anodic mineralization of atenolol at boron doped diamond and Pt electrodes. Separation and Purification Technology, 79 . pp. 56-62.

Muthkumar, M and Govindaraju, M R and Muthusamy, A and Bhaskar Raju, G (2011) Comparative Study of Electrocoagulation and Electrooxidation Processes for the Degradation of Ellagic. Separation Science and Technology, 46 (2). pp. 272-282.

Narasaiah, N and Das, Swapan K and Parida, N (2011) Report on failure analysis of connecting rod bolt. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Narasaiah, N and Das, Swapan K and Sahu, J K and Das, Goutam and Sharma, S K and Parida, N (2011) Evaluation of Center Buffer Coupler (Knuckle). Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Narasimhan, B R V and Satendra, Kumar and Sankara Narayanan, T S N (2011) Synthesis of manganese zinc ferrite using ferrous pickle liquor and pyrolusite ore. Environmental Chemistry Letters, 9 (2). pp. 243-250.

Nath, S K (2011) Effect of Mechanical Activation on Synthesis and Properties of Cordierite (2MgO.2Al2O3.5SiO2). Exploratory (OLP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Nayak, B (2011) Gold in the Beach Placer Sands of Chavakkad-Ponnani, Kerala Coast, India. Journal of the Geological Society of india, 78 (4). pp. 345-348.

Nayak, B and Das, Swapan K and Bhattacharyya, K K (2011) Detrital and authigenic(?) baddeleyite (ZrO2) in ferromanganese nodules of Central Indian Ocean Basin. Geoscience Frontiers, 2 (4). pp. 571-576.

Nayak, B and Sri, Damayanthi and Sharma, Mamta (2011) Mineralogical Constraints on Beneficiation of Low-grade Iron Ores: Case Studies from Jharkhand and Goa. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Nayar, S and Guha, Avijit (2011) A Novel Biomimetic Material-Glycine-PVA Ferrofluid That Crosses the Blood-Brain Barrier. Journal of Biomedical Nanotechnology, 7 (1). p. 78.

Nimbalkar, V M and Rao, B R K and Deshmukha, V P and Shah, A K and Marathe, K V (2011) Development reaction synthesis process of novel Al-alloys -TiB2 metal matrix composites by in-situ. Journal of Metallurgy and Materials Science, 53 (2). pp. 197-203.

Nodland, David and Ghosh, Arpita and Zargarzadeh, H and Jagannathan, S (2011) Neuro-Optimal Control of Helicopter UAVs. In: SPIE Defense, Security and Sensing, 25-29 April, 2011, Orlando, Florida, USA.

Padmanabhan, K A and Prabu, S Balasivanandha (2011) Ultrafine grained materials through mechanical processing: An assessment. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Pal, J and Ghorai, S and Goswami, M C and Bandyopadhyay, D and Ghosh, S (2011) Agglomeration of Waste Iron-oxide for use in Steel Making. Steel Tech, 6 (1). pp. 1-6.

Pal, J and Ghorai, S and Singh, D P and Goswami, M C and Bandopadhyay, D and Ghosh, Dinabandhu (2011) Dissolution Characteristics of CO2-Treated Fluxed Pellets in Hot Metal Bath. Mineral Processing and Extractive Metallurgy Review , 32 (4). pp. 229-246.

Palaniandy, Samayamutthirian and Azizli, Khairun Azizi Mohd and Hussin, Hashim and Hashim, Syed Fuad Saiyid (2011) Changes in the structure of talc by continuous jet milling in relation to imposed specific kinetic energy. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Palit Sagar, S and Metya, Avijit Kumar and Ghosh, M and Sivaprasad, S (2011) Effect of microstructure on non-linear behavior of ultrasound during low cycle fatigue of pearlitic steels. Materials Science and Engineering A, 528 (6). pp. 2895-2898.

Palit Sagar, S and Murthy, G V S and Das, T K and Prakash, Amit (2011) Development of Ultrasonic Technique for Surface Crack Detection of Semi-HSS and HSS Rolls. Collaborative (CLP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

1423/KOL/2011 Dt. 4.11 .2011 (2011) An improved ultrasonic inspection system for surface and sub-surface crack detection of HSS Rolls - Application No.1423/KOL/2011 Dt. 4.11 .2011. Patent Ref.No : PAT-0386/2011/India .

Palit Sagar, S and Prakash, Amit and Bandyopadhyay, D and Parida, N (2011) Feasibility of using ultrasonic technique to measure the blast furnace lining thickness. In: Advances in Analytical Techniques and Characterisation of Materials, July 5-7, 2011, RDCIS, Ranchi.

Panda, A K and Sharan, P K and Murthy, G V S and Roy, P K and Palit Sagar, S and Mitra, A (2011) Generation of Guided Waves Using Magnetostrictive Nanostructured Sensing Elements for Pipe Inspection. Journal of Non Destructive Testing and Evaluation, 10 (3). pp. 6-9.

Panda, A K and Singh, Satnam and Roy, Rajat K and Ghosh, M and Mitra, A (2011) Effect of Mn incorporation for Ni on the properties of melt spun off-stoichiometric compositions of NiMnGa alloys. Journal of Magnetism and Magnetic Materials, 323 (9). pp. 1161-1169.

Pandey, B D (2011) Rare Metals Extraction from Non-ferrous Resources in India: Present Status and Prospects of R&D. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India.

Council of Scientific & Industrial Research (2011) Process for recovery of copper and nickel powders from high iron containing waste or secondary resourc. IN200902504-I1.

Pani, Santosh and Singh, Siddharth and Paramanick, Subhajit and Dey, Shobhana and Das, Avimanyu (2011) Prospects of Utilization of Low Grade Iron Ore from Kiriburu. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Panigrahi, Suchismita (2011) Synthesis Of Inorganic Particles From Natural Source And Their Characteristics. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Parida, N and Palit Sagar, S (2011) Non-destructive Testing and Evaluation at CSIR-National Metallurgical Laboratory, Jamshedpur for Iron and Steel Industry: an Overview. In: International Conference on NDE for Steel& Allied Industries, 2-3 December, 2011, SNTI, Jamshedpur.

Park, Hong Ki (2011) Extraction of cobalt and lithium from waste lithium ion batteries of mobile phones. Masters thesis, Korea Maritime University, South Korea.

Parmar, Kavita and Chongder, D and Bandopadhyay, N R and Bhattacharjee, S (2011) Investigation on Cu(II) adsorption on cobalt silicate precipitation tube (CSPT) in aqueous medium. Journal of Hazardous Materials, 185 . pp. 1326-1331.

Parveen, Nikhat and Murthy, G V S (2011) Determination of elastic modulus in a nickel alloy from ultrasonic measurements. Bulletin of Materials Science, 34 (2). pp. 321-324.

Patil, Pravin J and Devi, Kadambini and Rane, D M and Sen, Amit and Sonawane, A U and Hussein, S A (2011) Application of Radiation Sources in Steel Industry in India. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Patra, P and Nagaraju, D R and Somasundaran, P (2011) Impact of pulp rheology on selective recovery of value minerals from ores. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Paul, Surajit Kumar (2011) Experimentation and material modelling for cyclic plastic deformation behavior in Primary heat transport piping (PHT) materials. PhD thesis, Jadavpur University, Kolkata.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Cyclic plastic deformation and damage in 304LN stainless steel. Materials Science and Engineering A, 528 (15). pp. 4873-4882.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Cyclic plastic deformation behavior in SA333 Gr. 6 C-Mn steel. Materials Science and Engineering A, 528 (24). pp. 7341-7349.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Key issues in cyclic plastic deformation: experimentation. Mechanics of Materials, 43 (11). pp. 705-720.

Phuong, To Duy and Duyen, Do Thi and Tuan, Le Minh and Thang, Pham Duc and Xuong, Nguyen Khac (2011) Studies on Ni-Cr-Mo-Ti dental cast superalloys. Journal of Metallurgy and Materials Science, 53 (3). pp. 217-224.

Prabhakar, S (2011) Column Flotation for the Beneficiation of Iron Ore Fines. In: International Conference on Iron and Steel Industry : Emerging Trends (Steelrise 2011), Feb. 1-2. 2011, National Metallurgical Laboratory, Jamshedpur.

Pramanick, A K and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Minj, R K (2011) Strengthening mechanism of V and Nb microalloyed low C Steel rebars produced through TMT. Collaborative (CLP). CSIR-NML, Jamshdpur. (Unpublished)

Prasad , Sanjay (2011) Extraction of chromium as Sodium Chromate from Stainless Steel Dust. The Journal of Solid Waste Technology and Management, 37 (1). pp. 40-46.

Priyanka, and Garai, Subhadra (2011) Synthesis and Characterization of Nano Bio Ceramic/Bio Composites for Bone Tissue Regeneration. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Prodhan, A (2011) Semisolid processing of short and long freezing range Cu alloys by electric current. Materials Science and Technology . pp. 1513-1517.

Raj, Manish (2011) Ultrasonic Immersion C-Scan Imaging Technique : A Novel Tool to Evaluate and Optimize EMS Parameters for Continuously Cast Steel Billet Quality. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Raji, K and Raj, S Alfred Cecil (2011) Micro to nano size distribution of powder particles of Al -Cu and its influence on strength properties. Journal of Metallurgy and Materials Science, 53 (4). pp. 369-374.

Rajnikanth, V and Venkateswarlu, K (2011) An investigation of sliding wear behaviour of WC–Co coating. Tribology International, 44 (12). pp. 1711-1719.

Rajnikanth, V and Venkateswarlu, K and Sen, Mani Kuntal and Das, Mousumi and Alhajeri, S N and Langdon, T G (2011) Influence of scandium on an Al–2% Si alloy processed by high-pressure torsion. Materials Science and Engineering A, 528 (3). pp. 1702-1706.

Ramadas, and Balasubramaniam, Krishnan and Joshi, Makarand (2011) Propagation Characteristics of Ao Mode in a Metallic Beam Containing a Semi-infinite Crack. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries -NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Raman, R Venkat and Abhilash, (2011) Isolation and biochemical characterisation of marine bacterial species from indian ocean nodules. Training Report (TR). NML, Jamshedpur.

Randhawa, N S and Jana, R K and Das, N N (2011) Manganese Nodules Residue: Potential Raw Material for Fesimn Production. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India.

Randhawa, N S and Jana, R K and Das, N N (2011) Removal of Cd(II) Ions from Aqueous Solution by Adsorption Using Manganese Nodules Leaching Residue. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.

Randhawa, N S and Mishra, D and Jana, R K (2011) Smelting of leached sea nodule residue blended with manganese ore for revovery of manganese. The Banaras Metallurgist, 16 . pp. 117-121.

Ranganathan, S and Godiwalla, K M (2011) Influence of process parameters on reduction contours during production of ferrochromium in submerged arc furnace. Canadian Metallurgical Quarterly , 50 (1). pp. 37-44.

Ranganathan, S and Godiwalla, K M and Chakraborty, D (2011) Investigation of the kinetics of reduction of chromite ore lumps with large particles of coke. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 120 (2). pp. 71-78.

Ranganathan, S and Godiwalla , K M and Satyanarayana, N V (2011) Simulation of Ferrochrome Production in Submerged Arc Furnaces for Optimisation of Specific Energy Consumption. Steel Tech, 5 (3). pp. 25-40.

Rao, D S and Vijaya Kumar, T V and Bhaskar Raju, G and Prabhakar, S (2011) Effect of the particle size on flotation performance of a siliceous limestone sample. Journal of Mining and Metallurgy, 47A (1). pp. 37-49.

Rao, D S and Vijaya Kumar, T V and Bhaskar Raju, G and Prabhakar, S (2011) Geochemical assessment of a siliceous limestone sample for cement making. Chin. J. Geochem, 30 . pp. 33-39.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2011) Beneficiation of Low-Grade Limestone Sample. Mining Science and Technology, 21 . pp. 631-636.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2011) Effectiveness of sodium silicate as gangue depressants in iron ore slimes flotation. International Journal of Minerals, Metallurgy and Materials, 18 ( 5). pp. 515-522.

Rath, R K and Kar, A K and Mohanta, M K and Singh, Ratnakar and Kumar, Anil (2011) Surface Chemical and Settling Studies on Hematite, Quartz and Kaolinite in Presence of Organic Reagents. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udaipur.

Rath, R K and Singh, R and Bhattacharyya, K K (2011) Processing of Coal Waste by Enhanced Gravity Seperation and Froth Flotation. In: Proceedings of International Conference on Coal and Coke, April 7-8, 2011, National Metallurgical Laboratory, Jamshedpur.

Ravi Kumar, B and Murthy, G V S and Mahato, B and Metya, Avijit Kumar and Gunjan, M K and Singh, S R (2011) Non-Destructive and Destructive Investigation of MLG Parts of MIG 29 Aircraft (TMP-0165). Other (TMP). National Metallurgical Laboratory (NML), Jamshedpur. (Submitted)

Ravi Kumar, B and Sharma, Sailaja and Mahato, B (2011) Formation of ultrafine grained microstructure in the austenitic stainless steel and its impact on tensile properties. Materials Science and Engineering A, 528 (6). pp. 2209-2216.

Ray, Ashok K and Kumar, S and Guguloth, K and Gunjan, M K and Goswami, B and Bose, S C (2011) Microstructural studies and remnant life assessment of eleven years service exposed reformer tube. Materials Science and Engineering A, 529 (1). pp. 102-112.

Ray, Ashok K and Roy, Nilima and Sahu, J K and Tiwari, Y N and Ray, R K and Sharma, R K and Gunjan, M K and Singh, S R (2011) Studies on creep behaviour and Statistical analysis of services exposed P-22 grade of Steel. Exploratory (OLP). CSIR-NML, Jamshdpur.

Ray, Ashok K and Tiwari, Y N and Guguloth, K and Das, Goutam and Gunjan, M K and Bose, S C and Ghosh, R N (2011) Health assessment of 22 years service-exposed radiant tube from an oil refinery. Engineering Failure Analysis, 18 (3). pp. 1067-1075.

Reddy, A and Kotiveerachari, B (2011) Influence of microstructural changes caused by ageing on wear behaviour of Al6061/SiC composites. Journal of Metallurgy and Materials Science, 53 (1). pp. 31-39.

Reddy, Sujatha and Amarnath, Miriyala and Sinha, Arvind and Singh, Shashi (2011) NanoBiphasic Ceramics For Tissue Engineering: A Review. Journal of Bionanoscience, 5 (1). pp. 26-32.

Roy, Rajat K and Kernion, Sam J and Shen, Shen and McHenry, Michael E (2011) Crystallization behavior and high temperature magnetic phase transitions of Nb-substituted FeCoSiBCu nanocompositesof. Applied Physics Letters, 99 . 192506-1-192506-3.

Roy, Rajat K and Sarkar, Partha and Singh, Satnam and Panda, A K and Mitra, A (2011) Crystallization kinetics and giant magneto impedance behavior of FeCo based amorphous wires. In: TMS 2011, 27 Feb- 3 March, 2011, San Diego, CA, USA.

Roy, Rajat K and Singh, Satnam and Gunjan, M K and Panda, A K and Mitra, A (2011) Joining of 304SS and pure copper by rapidly solidified Cu-based braze alloy. Fusion Engineering and Design, 86 . pp. 452-455.

Rudrakshi, G B and Reddy, G J and Goudar, D M and Vagmode, J and Srivastava, V C (2011) Microstructural and Hardness of Spray Deposited Al-30Mg 2 Si-2Cu Alloy in Solutionized and Aged Conditions. In: World Congress on Engineering and Technology, October 28 - November 02, 2011, Sanghai, China.

Rupa, P K P and Chakrborty, P C and Purnapu, Karuna and Mishra, Suman K (2011) Nanoindentation Studies of Hard Nanocomposite Ti-B-N Thin films. AIP Conference Proceedings, 1393 (3.596 (SCI)). pp. 239-240.

Sahu, A K and Goswami, N G and Choudhury, B K (2011) Research publications of National Metallurgical Laboratory during the year 2001- 2010 - A study on citation patterns. Annals of library and Information Studies, 58 (2). pp. 151-160.

Sahu, Ashvani Kr and Dey, Shobhana and Bhattacharya, S and Bhattacharya, K K (2011) Comparative Performance Analysis of Collectors in Flotation. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Sahu, J K and Das, D K and Nandy, T K and Mandal, D and Rajnikanth, V and Swaminathan, J and Ray, Ashok K (2011) Effect of titanium aluminide coating on cyclic plastic deformation and fatigue life of a titanium alloy at 600 °C. Materials Science and Engineering A, 530 . pp. 664-668.

Sahu, J K and Sahu, K K and Ray, Ashok K (2011) The influence of high-temperature oxidation resistant titanium aluminide coating on low-cycle fatigue behaviour of titanium alloy IMI 834 at 600°C. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, October 31, 2011 1464420711425133, 226 (L1). pp. 34-41.

Sahu, Ranjan K and Pandey, S K and Pathak, L C (2011) Valence and origin of metal-insulator transition in Mn doped SrRuO3 studied by electrical transport, X-ray photoelectron spectroscopy and LSDA plus U calculation. Journal of Solid State Chemistry, 184 (3). pp. 523-530.

Sahu, S K and Asselin, E (2011) Characterization of chalcopyrite leach residues produced during medium temperature leaching of chalcopyrite. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.

Sahu, S K and Asselin, E (2011) Characterization of residue generated during medium temperature leaching of chalcopyrite concentrate under CESL conditions. Hydrometallurgy, 110 (1-4). pp. 107-114.

Sahu, S K and Sinha, Manish K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2011) Solvent Extraction of Copper and Zinc From a Pickling Solution Using Versatic 10 Acid, Cyanex 272 and LIX 984N. In: International Congress & Exhibition, Non-Ferrous Metals-2011, September 7-9, 2011, Krasnoyarsk, Russia.

Samal, S and Chaira, D and Chaira, B (2011) Production and stability of al and cu ultrafine particles in nanofluids. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Sankara Narayanan, T S N (2011) Graphene - Its role in energy storage devices. [Presentation Slide] (Unpublished)

Sankara Narayanan, T S N (2011) Magnesium: A wonder material? [Presentation Slide]

Sankara Narayanan, T S N (2011) Role of nanomaterials on tribocorrosion. In: Corrosion protection and control using nanomaterials. Woodhead Publishing Ltd., UK, Cambridge, pp. 1-77.

Sankara Narayanan, T S N (2011) Tin plated contacts - Problems due to fretting corrosion and whisker growth. [Presentation Slide] (Unpublished)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Evaluation of corrosion performance of reinforcement steel. Sponsored (SSP). NML, Chennai Centre, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Studies on the Electrochemical Behaviour of Ti-Mo Alloys In Fluoride Medium to assess their Suitability for Dental Implant Applications (OLP-0073). Exploratory (OLP). NML, NML, Chennai Centre. (Submitted)

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro - and electroless deposited composite coatings: preparation, characteristics and applications. In: Encyclopedia of composites. Wiley, Hoboken, N J.

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro‐ and electroless composite coatings. In: ENCYCLOPEDIA OF TRIBOLOGY . Springer‐Verlag GmbH, Heidelberg, pp. 1-11.

Sarode, Anurag and Tiwari, S K (2011) Electrochemical study of organic and inorganic hybrid coatings on Al-7075 (STR). Training Report (TR). NML, Jamshedpur. (Submitted)

Sasikumar, C and Srikanth, S and Kumar, Rakesh and Alex, T C and Mehrotra, S P (2011) Where does the energy go in high energy milling? In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Satapathy, P K and Behera, R K and Nayak, A K and Mishra, T (2011) Adsorptive Removal of Phosphate from Aqueous Solutions using Ceria-Titania Mixed Oxide. Asian Journal of Chemistry, 23 (7). pp. 3055-3058.

Satapathy, P K and Randhawa, N S and Das, N N (2011) Oxidative decolorization of methylene blue by leached sea-nodule residues generated by the reductionroasting ammoniacal leaching process. Environmental Technology . pp. 1-8.

Satendra, Kumar and Sankara Narayanan, T S N (2011) Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium. Journal of Applied Electrochemistry, 41 . pp. 123-127.

Sau, D C and Biswal, K C (2011) Computational fluid dynamics and experimental study of the hydrodynamics of a gas–solid tapered fluidized bed. Applied Mathematical Modelling, 35 (5). pp. 2265-2278.

Sau, D C and Sengupta, Rajarshi and Bandopadhyay, D (2011) Development of Model for the Estimation of Coke Bed Voidage and the Liquid levels in the Blast Furnace Hearth. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Sengupta, Vivek (2011) Effect of Severe Plastic Deformation by High Pressure Torsion Process on Aluminium 6082 alloy. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

Sepelak, V and Bergmann, I and Indris, S and Heitjans, P and Becker, K D (2011) Crystallite size dependent cation distribution in nanostructured spinels studied by nmr, mössbauer spectroscopy and XPS. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Shakhtshneider, T P and Myz, S A and Dyakonova, M A and Boldyrev, V V and Nizovskii, A L and Kalinkin, A V and Kumar, Rakesh (2011) Mechanochemical Preparation of Organic-Inorganic Hybrid Materials of Drugs with Inorganic Oxides. Acta Physica Plolonica, 120 (2). pp. 272-278.

Shakhtshneider, T P and Myz, S A and Mikhailenko, M A and Dyakonova, M A and Boldyrev, V V (2011) Mechanochemistry and solubilization of drugs. In: International Conference on Mechanochemistry and Mechanical Alloying, 1-4 December 2008, CSIR-NML, Jamshedpur.

Sharma, P and Hue, K and El-Shall, H and Powers, K and Moudgil, B (2011) Nano, bio and mineral technologies—mutual leveraging for product and process innovations. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Shravan Kumar, K and Biswas, Krishanu and Balasubramaniam, R (2011) Mechanism of Film Growth of Pulsed Electrodeposition of Nanocrystalline Copper in Presence of Thiourea. Journal of Nanoparticle Research, 13 (11). pp. 6005-6012.

Shyamsunder, M T (2011) Advances in Electromagnetic NDE and its Applications to the steel and allied industries. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Singh, Harish and Dey, Shobhana and Bhattacharya, S (2011) Release Analysis of Coal. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Singh, K and Patnaik, P and Bhaisare, D K and Jagannath, O and Krishnamurthy, N and Suri, A K (2011) Measurement of relative sticking coefficient of nitrogen on Al/Ti in a magnetron sputtering system. Journal of Metallurgy and Materials Science,, 53 (3). pp. 261-268.

Singh, K K and Mondal, N and Choudhary, R B and Mishra, A K and Prasad, R R and Avtar, Ram and Mukerjee, D and Bhattacharya, G and Biswasroy, J K and Singh, Wakil (2011) Detection of Defects on Cold Rolling Mill (CRM) Rolls with Ultrasonic and Eddy Current Flaw Dectors. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries -NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Singh, P K and Arora, Punit and Bhasin, V and Vaze, K K and Pukazhendi, D M and Gandhi, P and Raghava, G and Sivaprasad, S and Tarafder, S (2011) Fatigue studies on stainless steel piping materials and components: Indian AHWR. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India.

Singh, R K and Mehta, K D and Sharma, Mamta and Bhattacharyya, K K (2011) Effect of Magnetic Field Intensity on Iron ore Separation Efficiency in slimes. Journal of Sustainable Planet, 2 (3). pp. 44-49.

Singh, R K and Mehta, K D and Sharma, Mamta and Bhattacharyya, K K (2011) Performance Evaluation of Magnetic Field Intensity on Iron ore slimes. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Singh, Raghuvir (2011) Different Forms of Corrosion in Industries. In: lndustrial Corrosion and Protection in Coastal & Other Environments, Feb - 2011, HIT.

Singh, Raghuvir and Swaminathan, J and Paswan, S and Rajnikanth, V and Chattoraj, I (2011) Investigations on high temperature corrosion of wire enameling oven. Engineering Failure Analysis, 18 (5). pp. 1375-1387.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K and Dahotre, N B (2011) Electrochemical and mechanical behavior of laser processed Ti–6Al–4V surface in Ringer’s physiological solution. Journal of Materials Science: Materials in Medicine, 22 . pp. 1787-1796.

Singh, Raj Kumar and Kumari, Mamta and Prasad, J N (2011) A first principle numerical approach to spin dependent transport. Journal of Metallurgy and Materials Science, 53 (3). pp. 275-287.

Singh, Raj Kumar and Kumari, Mamta and Prasad, J N (2011) Interaction of ferromagnet conduction electron spin with spatial and time varying magnetization. Journal of Metallurgy and Materials Science, 53 (2). pp. 153-159.

Singh, Rajesh Kumar (2011) Inhibition of the corrosion of mild steel in the pulp and paper industry. Journal of Metallurgy and Materials Science, 53 (4). pp. 411-418.

Singh, Ratnakar and Rath, R K and Nayak, B and Bhattacharyya, K K (2011) Development of process for beneficiation of Low-grade iron ore samples from Orissa, India. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.

Singh, Ravinder Pal and Singh, Harvinder (2011) Characterization and comparison of treated and untreated rich hush ash & fly ash for metal matrix composites. Journal of Metallurgy and Materials Science, 53 (2). pp. 189-196.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2011) Processing of a Waste Stream for Separation and Recovery of Copper and Zinc. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2011) Solvent extraction and separation of copper and zinc from a pickling solution. In: 15th International Conference on Nonferrous Metals 2011, 7-8 July 2011, Kolkata,India.

Sinha, N and Singh, Ratnakar (2011) Studies on chemical processing of graphite from Palamu. Journal of Chemtracks , 13(2) . pp. 489-492.

Sinha, Prayag and Jha, Manis K (2011) Solvent Extraction of Copper from Synthetic Solution of PCB Leach Liquor using LIX984N. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Sircar, J K and Mohanty, Ashok and Konar, J and Garain, Pijush K and Dhonge, S S (2011) Stability constant determination revisited : A voltammetric method of study of Lead-1, 10 phenanthroline complex. Journal of Metallurgy and Materials Science, 53 (1).

Sitak Kumar, Pal (2011) Development of zero waste technology for processing and utilization of thermal coal. Exploratory (OLP). CSIR-NML, Aug, 2011.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Comparison of the fretting corrosion behaviour of Ti-6Al-4V alloy and CP-Ti IN ringer’s solution. Tribology - Materials, Interfaces and Surfaces, 5(4) (1.553). pp. 158-164.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Fretting corrosion behaviour of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions. Wear, 270 . pp. 317-324.

Sivaprasad, S and Paul, Surajit K and Tarafder, S and Gupta, Suneel K and Bhasin, Vivek (2011) Cyclic plastic deformation behaviour of PHT piping materials - an experimental investigation. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India .

Soupramanien, C and Paul, K K and Sivaprasad, S and Tarafder, S and Narasaiah, N (2011) Design and Development of Loading Fixture for Mixed Mode I/II Fracture Studies. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Sreedevi, P and Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2011) Studies on the Zetapotential of Calcite/p-Sulfonatocalix[ 4,8]arenes. Journal of Dispersion Science and Technology, 32 . pp. 1531-1536.

Sreedevi, P and Chennakesavulu, K and Kavitha, M and Bhaskar Raju, G and Prabhakar, S (2011) Electrokinetic behavior of Fluorite. Journal of Dispersion Science and Technology, 32 . pp. 1306-1310.

Sridhar, G and Gunjan, M K and Munda, Parikshit and Kumar, Pankaj and Roy, P K and Prakash, Amit and Sharma, R K and Singh, S R (2011) Root cause analysis of bucket stage III OF GT-2A. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Srikanth, S (2011) CSIR-National Metallurgical Laboratory, Jamshedpur, India. [Presentation Slide] (Submitted)

Srikanth, S (2011) Current Activities at CSIR-NML on Steel. [Presentation Slide] (Submitted)

Srikanth, S (2011) Evaluation of Structural Integrity. [Presentation Slide] (Submitted)

Srikanth, S (2011) Institutional Collaboration: India-Australia. [Presentation Slide] (Submitted)

Srikanth, S (2011) Processing of Secondaries & Waste. [Presentation Slide] (Unpublished)

Srivastava, V C and Singh, Mirtunjay and Kumar, Tipu and Sahoo, K L (2011) Effect of Al-alloy composition and foaming temperature on pore size, density and mechanical properties. In: International Conference on Porous Metals and Metallic Foams (MetFoam-2012), September 18-21, 2011, Busan, Korea.

Starman, S and Matz, V (2011) Automated System for Crack Detection using Infrared Thermographic Testing. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Starman, S and Matz, V (2011) Real Implementation of Ultrasonic Phased Array Technology Using Advanced Signal Processing Algorithms. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Sujatha, G and Sinha, Arvind and Singh, Sashi (2011) Cells Behaviour in Presence of Nano-Scaffolds. Journal of Biomedical Nanotechnololgy, 7 (1). pp. 43-44.

Supriya, and Prakash, Amit and Metya, Avijit Kumar and Palit Sagar, S (2011) Application of Ultrasonic Waves in Non-Destructive Testing and Evaluation. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Surkov, G and Golovko, A K and Lomovsky, O I and Lobanov, J S (2011) Mechanochemical conversion of acetylene in quartz – ultrafine metal powder system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Swain, S K and Sen, S (2011) Study of microstructure of thick wall ductile iron castings. Journal of Metallurgy and Materials Science, 53 (2). pp. 133-137.

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Mahato, B (2011) Sensitization induced stress corrosion failure of AISI 347 stainless steel fractionator furnace tubes. Engineering Failure Analysis, 18 (8). pp. 2211-2221.

Tarafder, Mita and Pal, Sital K and Madhukar, A and Kundu, Sudip and Chatterjee, Kakali and Dash, Byomkesh (2011) Development and implementation of unified model for organizational information processing (OLP-12731). Exploratory (OLP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tcherdyntsev, V V and Kaloshkin, S D and Sudarchikov, V A and Dorofeev, A A and Mochkina, I V and Yuryeva, N V and Danilov, V D (2011) Ball milling effect on the properties of ultra high molecular weight Polyethylene - bronze composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Shevchukov, A P and Sviridova, T A and Kaloshkin, S D (2011) Phase transformations in mechanically alloyed Al-Cu-Cr powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Titova, V Yu and Kaloshkin, S D and Baldokhin, Yu V and Zagainov, A V and Rodin, A O (2011) Structure and magnetic properties of mechanically alloyed Fe3-xAlCrx powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Teremova, M I and Petrakovskaya, E A and Romanchenko, A S and Tuzikov, F V and Gurevich, Yu L and Tsibina, O V and Yakubailik, E K and Abhilash, (2011) Iron-based ultrafine particles made in mode solutions and industrial waste waters. In: The thrid International Congress on Non-Ferrous Metals, September 7-9, 2011, Hrasnoyarsk, Russia.

Thirugnanam, A and Chakravarthi, N. Veera and Chakkingal, Uday and Kumar, T S Sampath (2011) Novel titanium - hydroxyapatite biocomposites By mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME2008), 1-4 December, 2008, CSIR-NML, Jamshedpur.

Tiwari, S K and Sahu, Ranjan K and Pramanick, A K and Singh, Raghuvir (2011) Development of conversion coating on mild steel prior to sol gel nanostructured Al2O3 coating for enhancement of corrosion resistance. Surface and Coatings Technology, 205 . pp. 4960-4967.

Tiwari, Y N and Guguloth, K (2011) Stress rupture properties on SA 209 grades (T1/T1a) of steel bloom sample. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tiwari, Y N and Roy, P K (2011) Assessment of mechanical properties of boiler tubes. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tiwari, Y N and Singh, S R and Parida, N and Roy, P K (2011) Stress rupture properties evaluation of service exposed boiler tubes. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Tripathi, Abhishek and Kumar, Manoj and Agrawal, A and Sau, D C and Chakravarty, S and Mankhand, T R (2011) Leaching of Gold from the Waste Mobile Phone Printed Circuit Boards (PCBS) with Ammonium Thiosulphate. In: 15th International Conference on Nonferrous Metals 2011, 8-9 July 2011, Kolkata,India.

Turianicová, Erika and Baláž, Peter (2011) A possible way to storage carbon dioxide on mechanically activated olivine (Mg,Fe)2SiO4. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Upadhyay, Divyesh (2011) Microstructural analysis of 7075-Aluminium alloy. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

Vaish, A K and Singh, S D (2011) Development of Eco-friendly process for the recovery of Lead from lead battery scrap in small scale sector. The Banaras Metallurgist, 16 ( ). pp. 149-157.

Vassilev, T S and Ivanova, G and Dragieva, I and Pramanick, A K and Sinha, Arvind (2011) Thermal behavior of ferromagnetic bio-compatible nanoparticles: A comparative DSC study. In: Nanoscience & Nanotechnology. Bulgarian Academy of Sciences, Sofia, pp. 225-229. ISBN ISBN 1313-8995

Venkatraman, B (2011) Advanced NDE and QA for Ensuring Quality and Integrity of Critical Components in Nuclear Industry. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Venugopalan, T and Palit Sagar, S (2011) Need of Improved Non-Destructive Technique for the Surface Condition Monitoring of High Speed Steel (HSS) Work Rolls. In: NDESAI-2011, December 2-3, 2011, Tata Steel, Jamshedpur, India.

Verma, B N and Kumar, Sanjay and Joarder, B (2011) Improvement in New Grades of Work Roll for Hot Strip Mill through NDE. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

Verma, Devraj and Mishra, Suman K (2011) Deposition of Multilayered SI-C-N Nanocomposite Coatings from Single Target by Magnetron Sputtering for Engineering Applications. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2011) Role of Mixed Cationic/Anionic Collector Systems on Hematite Flotation. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India.

Vidyadhar, A and Srivastava, A and Singh, R K and Nayak, B and Rao, K V and Das, Avimanyu and Bhattacharyya, K K (2011) Development of Processing Technology for Beneficiation of Lean Iron Ore Fines from GOA. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Vijaya Kumar, T V and Rao, D S and Gopalakrishna, S J (2011) Mineralogical and separation characteristics of iron ore fines from Bellary – Hospet, India with special emphasis on beneficiation by flotation. Journal of Mining and Metallurgy, 47A (1). pp. 39-49.

Vijayalakshmi, P and Bhaskar Raju, G and Gnanamani, A (2011) Advanced Oxidation and Electrooxidation As Tertiary Treatment Techniques to Improve the Purity of Tannery Wastewater. Industrial & Engineering Chemistry Research, 50 (17). pp. 10194-10200.

Vikash, Avijeet and Metya, Avijit Kumar and Palit Sagar, S (2011) Application of Ultrasonic Technique for Materials property evaluation. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Welham, N J and Setoudeh, N (2011) Increasing gas sorption onto carbon by milling with alumina. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Yadav, T P and Mukhopadhyay, N K and Tiwari, R S and Srivastava, O N (2011) Mechanically induced phase transformation in Al-Cu- Fe-Cr decagonal Quasicrystalline alloy by high-energy ball milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Yariv, S and Lapides, I and Abramova, E (2011) Mechanochemical reactions of clay minerals with CsCl. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Zhou, L and Liu, J and Hao, X J and Strangwood, M and Peyton, A J and Balamurugan, S and Morris, P F and Davis, C L (2011) Quantification of the effect of changes in steel microstructural parameters on EM sensor signals. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India.

This list was generated on Thu Mar 28 17:37:42 2024 IST.