Items where Subject is "Metallurgy > Waste Utilization"
Group by: Creators | Item Type
Number of items at this level: 72.
Abhilash, and Agarwal, Harshita and Meshram, Pratima and Meshram, Rohit B and Jha, Soni and Patel, J N and Soni, M K and Rokkam, Kiran and Mashruwala, Sheeba (2021) Green process for recovery of vanadium from hazardous spent contact process catalyst by oxalic acid: kinetics and mechanism. Separation Science and Technology (1.75).
Abhilash, and Ghosh, Anirban and Pandey, B D (2015) Bioleaching of low grade granitic chalcopyrite ore by hyperthermophiles: Elucidation of kinetics-mechanism. Revue de Métallurgie, 112/5 (IF-0.176). pp. 1-14.
Abhilash, and Meshram, Pratima and Sarkar, Supriyo and Venugopalan, T (2017) Exploring Blast Furnace Slag As A Secondary Resource For Extraction Of Rare Earth Elements. Minerals & Metallurgical Processing Journal, 34(4) (IF-0.692). pp. 178-182.
Adeleke, A A and Odusote, J K and Lasode, O A and Ikubanni, P P and Malathi, M and Paswan, Dayanand (2019) Evaluation of Thermal Decomposition Characteristics and Kinetic Parameters of Melina Wood. Biofuels (IF-1.130). pp. 1-7.
Agrawal, A and Kumari, S and Ray, B C and Sahu, K K (2007) Extraction of acid and iron values from sulphate waste pickle liquor of a steel industry by solvent extraction route. Hydrometallurgy, 88 (1-4). pp. 58-66.
Agrawal, A and Sahu, K K and Pandey, B D (2004) Solid waste management in non-ferrous industries in India. Resources, Conservation and Recycling, 42 (2). pp. 99-120.
Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2017) c. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151.
Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213.
Dhal, B and Pandey, B D and Abhilash, (2018) Mechanism elucidation and adsorbent characterization for removal of Cr(VI) by native fungal adsorbent. Sustainable Environment Research . (In Press)
Gupta, N and Bhattacharya, P (2023) Microwave-plasma induced one-step synthesis of Ni(PO3)2 nanosphere-loaded bio-waste derived N, P co-doped carbon for an asymmetric supercapacitor with prolonged life. Journal of Materials Chemistry C, 11(39) . pp. 13503-13517.
Gurevich, Y L and Teremova, M I and Bondarenko, G N and Kislan, S L and Abhilash, (2015) Bio-chemical leaching of kaolinite-hematite-boehmite type bauxite ore. Indian Journal of Chemical Technology, 22/5 (IF-0.655). pp. 248-252.
Harsh Raj, and Jha, S K and Paswan, Dayanand (2016) Optimization of Process Parameter for Smelting and Reduction of Ferrochrome. International Journal of Engineering Research & Technology, 5(10) .
Kalinkin, A M and Alex, T C and Nath, S K and Gurevich, B I and Kalinkina, E V and Tyukavkina, V V (2013) Geopolymers Based on Mechanically Activated Non-Ferrous Slags. Chemistry for Sustainable Development, 6 (IF-). pp. 647-655.
Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) Anodic Dissolution Behaviour of Tungsten Carbide Scraps in Ammoniacal Media. Advanced Material Research, 828 (IF-). pp. 11-20.
Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2007) Towards sustainable solutions for fly ash through mechanical activation. Resources, Conservation and Recycling, 52 (2). pp. 157-179.
Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A (2006) Innovative methodologies for the utilisation of wastes from metallurgical and allied industries. Resources Conservation and Recycling, 48 (4). pp. 301-314.
Kumar, Sanjay and Sahoo, D P and Nath, S K and Alex, T C and Kumar, Rakesh (2012) From Grey Waste to Green Geopolymer. Science and Culture, 78(11-12) . pp. 511-516.
Meshram, Pratima and Abhilash, (2019) Battery Recycling- Charged with Huge Potential. Material Recycling , 5(2) . pp. 20-22.
Meshram, Pratima and Abhilash, and Sahu, Rina (2020) Environmental impact of spent lithium-ion batteries and green recycling perspectives by organic acids - A review. Chemosphere, 242 (IF-5.778).
Meshram, Pratima and Pandey, B D and Abhilash, (2019) Perspective of availability and sustainable recycling prospects of metals in rechargeable batteries – A resource overview. Resources Policy, 60 . pp. 9-22.
Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Hydrometallurgical processing of spent lithium ion batteries (LIBs) in the presence of a reducing agent with emphasis on kinetics of leaching. Chemical Engineering Journal, 281 (IF-4.321). pp. 418-427.
Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Leaching of base metals from spent Ni–metal hydride batteries with emphasis on kinetics and characterization. Hydrometallurgy, 158 (1.933). pp. 172-179.
Meshram, Pratima and Pandey, B D and Mankhand, T R (2016) Process optimization and kinetics for leaching of rare earth metals from the spent Ni–metal hydride batteries. Waste Management, 51 (IF-4.030). pp. 196-203.
Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Recovery of valuable metals from cathodic active material of spent lithium ion batteries: Leaching and kinetic aspects. Waste Management, 45 (IF-3.220). pp. 306-313.
Meshram, Pratima and Prakash, Uday and Bhagat, Lalit and Abhilash, and Zhao, Hongbo and van Hullebusch, Eric D (2020) Processing of Waste Copper Converter Slag Using Organic Acids for Extraction of Copper, Nickel, and Cobalt. Minerals, 10(3) (IF-2.380). p. 290.
Mishra, D and Kanari, N and Sahu, K K and Gaballah, I (2008) Recovery of zinc and lead from electric arc furnace dusts through the oxy – chlorination route. Metal Materials & Processes, 20 (2). pp. 161-172.
Nath, S K and Randhawa, N S and Kumar, Sanjay (2022) A review on characteristics of silico-manganese slag and its utilization into construction materials. Resources, Conservation and Recycling, 176 .
Nath, S K and Kumar, Sanjay (2013) Inﬂuence of iron making slags on strength and microstructure of ﬂy ash geopolymer. Construction and Building Materials, 38 (IF-1.834). pp. 924-930.
Nath, S K and Maitra, S and Mukherjee, S and Kumar, Sanjay (2016) Microstructural and morphological evolution of fly ash based geopolymers. Construction and Building Materials, 111 (IF-3.169). pp. 758-765.
Nguyen, N V and Lee, Jae-chun and Jha, Manis K and Yoo, Kyoungkeun and Jeong, Jinki (2009) Copper recovery from low concentration waste solution using Dowex G-26 resin. Hydrometallurgy, 97 (3-4). pp. 237-242.
Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178.
Pal, J and Ghorai, S and Das, Avimanyu (2015) Development of carbon composite iron ore micropellets by using the microfines of iron ore and carbon-bearing materials in iron making. International Journal of Minerals, Metallurgy and Materials, 22 (IF-0.69). pp. 132-140.
Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D and Ghosh, Sukomal (2013) Development of fluxed micropellets for sintering utilising iron oxide waste fines. Ironmaking & Steelmaking, 40(7) (IF-0.454). pp. 498-504.
Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.
Pal, J and Venugopalan, T (2015) Carbon as in situ energy source in induration of hematite pellets and its effect on pellet properties. Ironmaking and Steelmaking, 42 (IF-0.553). pp. 139-147.
Paswan, Dayanand and Malathi, M and Minj, R K and Bandopadhyay, D (2015) Mill Scale: A Potential Raw Material for Iron and Steel Making. Steelworld , 21 . pp. 54-56.
Paswan, Dayanand and Minj, R K and Singh, S D and Vaish, A K and Ghorai, S and Malathi, M and Mehta, K D and Prasad, S and Venugopalan, T (2014) Exploitation of banded hematite quartzite and Jhama coal for the production of higher grade ferro-silicon. IIM Metal News, 17(4) . pp. 23-28.
Paul, S and Das, R C and Das, T (2018) Utilization of polluting CO2 gas to produce copper from low grade ore waste by single stage combined hydro and electrometallurgical process. Journal of Metallurgy and Materials Science, 60(4) . pp. 203-210.
Priya, Jayati and Randhawa, N S and Hait, Jhumki and Bordoloi, N and Patel, J N (2020) High purity copper recycled from smelter dust by sulfation roasting, water leaching and electrorefining. Environmental Chemistry Letters (IF-5.922). pp. 1-7.
Randhawa, N S and Jana, R K (2014) Efficient removal of aqueous lead by leached sea nodules residue. Desalination and Water Treatment (IF-0.987). pp. 1-11.
Randhawa, N S and Jana, R K and Das, N N (2012) Manganese Nodules Residue: Potential Raw Material for FeSiMn Production. International Journal of Metallurgical Engineering, 1(2) . pp. 22-27.
Randhawa, N S and Jana, R K and Das, N N (2012) Silicomanganese production utilising low grade manganese nodules leaching residue. Mineral Processing and Extractive Metallurgy (Trans. IMM C) (0.667). pp. 1-9.
Randhawa, N S and Jana, R K and Das, N N (2012) Thermodynamics and Viscosity Aspects in Manganese Nodule Residue Smelting for Silicomanganese Production. International journal of Metallurgical Engineering, 1(5) . pp. 88-95.
Randhawa, N S and Murmu, Nisha and Tudu, Shakuntala and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. Environmental Chemistry Letters, 12(4) (IF-1.906). pp. 517-522.
Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2009) Removal of chromium(III) by cation exchange resin, Indion 790 for tannery waste treatment. Hydrometallurgy, 99 (3-4). pp. 170-174.
Singh, C B and Vaish, A K (2018) Comparative performance of ancient iron making furnace using different varieties of wood charcoal. Journal of Metallurgy and Materials Science, 60(2) . pp. 89-94.
Vijaya Kumar, T V and Vasumathi, N and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2013) Recovery of ultrafine iron values from tailing pond of iron ore washing plants. The Indian Mineralogist, 1-2 . pp. 83-92.
Book or NML Publication
Abhilash, (2020) Dissimilatory Iron-Reducing Bacteria: A Template for Iron Mineralization and Nanomaterial Synthesis. In: Microbes for Sustainable Development and Bioremediation. CRC Press, US, pp. 89-106. ISBN 9780367226008
Jha, Manis K and Kumari, Archana and Panda, Rekha and Parween, R and Chakravarty, S and Kumar, J Rajesh (2020) Coal Burn Ash: A Sustainable Future Resource for Critical Metals Production. In: Clean Coal Technologies. Springer, Nature.
Kumar, Rakesh and Srivastava, J P and Premchand, (1998) Utilization of iron values of red mud for metallurgical applications. In: Environmental and Waste Management (ISSN : 0971-9407). National Metallurgical Laboratory, Jamshedpur, India, Jamshedpur, India, pp. 108-119.
Kumari, Archana and Jha, Manis K and Chakravarty, S and Pathak, D D (2020) Indian Coal Ash: A Potential Alternative Resource for Rare Earth Metals (REMs). In: Rare Metal Technology 2020. The Minerals, Metals & Materials Society 2020, pp. 265-273.
Panda, Rekha and Jha, Manis K and Dinkar, Om Shankar and Pathak, D D (2020) Reclamation of Precious Metals from Small Electronic Components of Computer Hard Disks. In: Rare Metal Technology 2020. The Minerals, Metals & Materials Society 2020, pp. 243-250.
Conference or Workshop Item
Abhilash, and Sinha, Shivendra and Meshram, Pratima and Pandey, B D and Behera, P K and Satapathy, B K (2014) RedMud: A Secondary Resource for Rare Earth Elements. In: International Bauxite, Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, India.
Jana, R K and Randhawa, N S and Agarwal, Sanjay (2008) Making standard grade FeSiMn alloy by blending of different low grade materials. In: National Metallurgist Day - Annual Technical Meeting (NMD-ATM), 12-15 November 2008, New Delhi.
Jana, R K and Randhawa, N S and Agarwal, Sanjay and Maity, S K and Ghorai, S (2008) Two stage smelting process for recovery of manganese from low manganese bearing material. In: 12th Int. Sem. Nonferrous Metals – 2008, 4-5 July, 2008, Nagpur.
Jana, R K and Randhawa, N S and Pal, J and Minj, R K and Godiwalla, K M (2005) Recovery of manganese as ferro-silico-manganese alloy from leached sea nodule residue. In: National Seminar on Polymetallic Nodule, 29-30th September 2005, Bhubaneswar.
Meshram, Pratima and Kumari, Jyotsna and Abhilash, and Pandey, B D (2014) Extraction of V2O5 from Bayers Sludge - An Overview. In: Int Bauxite,Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, INDIA.
Priya, Jayati and Randhawa, N S and Hait, Jhumki (2020) Thermochemical Simulation, Thermogravimetry and Roasting Studies for Selective Sulfation of Copper in Flash Smelter Dust. In: 22nd DAE-BRNS Sysmposium on Thermal Analysis (Thermans2020), 30 Jan-01 Feb 2020, BARC (Mumbai).
Randhawa, N S and Das, N N and Jana, R K (2010) Sorption of cadmium ions from aqueous solution by manganese nodules leached residue. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2010, 13-15 November 2010, IISc Bangalore.
Randhawa, N S and Jana, R K (2013) Lead sorption by sea nodule residue generated in reduction roasting – ammonia leaching. In: Mineral Processing Technology- 2013, 10-12 December 2013, Bhubaneshwar.
Randhawa, N S and Jana, R K and Agarwal, Sanjay and Ghorai, S and Maity, S K and Pal, J (2007) Production of Fe-Si-Mn from leached sea nodule residue. In: Inter. Sem. on Mineral Processing Technology, 2007, 22-24 Feb, 2007, IIT Mumbai.
Randhawa, N S and Jana, R K and Das, N N (2011) Removal of Cd(II) Ions from Aqueous Solution by Adsorption Using Manganese Nodules Leaching Residue. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.
Randhawa, N S and Jana, R K and Das, N N (2012) Sorption characteristics of aqueous copper onto residue generated in ammoniacal leaching of manganese nodules. In: Inter. Symp. on Advances in Environment Friendly Technology in Mineral Processing and Metal Extraction (AETMME-2012), 18-20 Jan, 2012, Bhubaneswar.
Randhawa, N S and Katiyar, P K and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2013) Anodic dissolution behaviour of tungsten carbide scraps in ammoniacal media. In: 17th Int. Conf. on non-ferrous Met. 2013, 5-6 July 2013, Ranchi (India).
Randhawa, N S and Mishra, D and Jana, R K (2010) Smelting of leached sea nodule residue blended with manganese ore for recovery of manganese. In: 14th Int. Conf. on non-ferrous Min. & Met. 2010, 9-10 July, 2010, Varanasi.
Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2009) Recovery of acid and iron values from the spent pickle liquor by solvent extraction. In: NMD - ATM 2009, November 14, 2009 to November 17, 2009, Science City Complex,Kolkata, India.
Vijaya Kumar, T V and Vasumathi, N and Ajita, Kumari (2019) Indigenization and development of column flotation technology at CSIR- NML Madras Centre. In: XVIII Conference on Mineral Processing Technology 2019 (MPT-2019) , 16-18 December, 2019, Hotel Marigold, Begumpet, Hyderabad.
Yaswanth, R and Raswanth, S S and Prabhakaran, S and Vasumathi, N (2019) Natural Waste Product Derived Fluorescent Carbon Dots for Bioimaging and Forensic Applications. In: NMD-ATM 2019, 13-16, November 2019, Thiruvananthapuram, Kerala.
Chakrabarty, K and Banerjee, T (1954) Utilisation of Silver Refinery waste liquor for the production of Plating Salts. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.
Chopra, M S and Mathur, G P and Narayanan, P I A (1964) Utilization of important Mining & Metallurgical Wastes employing Mineral Beneficiation Techniques. Other (TMP). CSIR NML, Jamshedpur.
Bhattacharya, Madhusmita (2011) Isolation and purification of bacteria from bauxite and iron ore mine samples. Masters thesis, National Metallurgical Laboratory (NML).
Srivastava, Nidhi and Abhilash, (2012) Bacterial Isolates in hexavalent chromium reduction:Applications form synthetic to real systems. Masters thesis, Trident Academy of Creative Technology (Utkal University).