Items where Division is "Material Science and Technology" and Year is 2007

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | G | K | M | N | P | R | S | T | V
Number of items: 98.

A

Alex, T C and Kumar, Rakesh and Upadhyay, A K and Mishra, T and Mahato, B and Mehrotra, S P (2007) Role of Mineralogy and Origin of Mechanically Activated (Indian) bauxite in Bayer Process. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

B

Bahadur, Aruna and Mitra, A and Ravi Kumar, B and Palit Sagar, S (2007) Evaluation and Correlation of Residual Stress Measurement in Steel. Evaluation and Correlation of Residual Stress Measurement in Steel , 26 (2-4). pp. 47-55.

Balasubramani, N and Suresh, M and Srinivasan, A and Pillai, U T S (2007) Observation of the suppression of Mg17Al12 formation in a La-containing AZ91 alloy. Journal of Materials Science, 42 (19). pp. 8374-8376.

Bar, H N and Parida, N and Palit Sagar, S and Ghosh, R N (2007) Evaluation of Prototype Horton Sphere using Acoustic Emission. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Basu, A and Majumdar, J Dutta and Ghosh Chowdhury, S and AjiKumar, P K and Tyagi, A K and Baldevraj, and Manna, I (2007) Microstructural and texture studies of gas-nitrided Cr-coated low-alloy high-carbon steel. Surface and Coatings Technology, 201 (16-17). pp. 6985-6992.

Bid, S and Sahu, Puspendu and Pradhan, S K (2007) Microstructure characterization of mechanosynthesized nanocrystalline NiFe2O4 by Rietveld's analysis. Physica E: Low-dimensional Systems and Nanostructures, 39 (2). pp. 175-184.

Biswas, Somjeet and Sivaprasad, S and Narasaiah, N and Tarafder, S and Chakraborti, P C (2007) Load history effect on FCGR behaviour of 304LN stainless steel. International Journal of Fatigue, 29 (4). pp. 786-791.

D

Das, Swapan K (2007) Fracture Behaviour of Copper Strengthened HSLA Steel. PhD thesis, Bengal Engineering and Science University.

Das, Swapan K and Mukhopadhyay, N K and Ravi Kumar, B and Bhattacharya, D K (2007) Failure analysis of a passenger car coil spring. Engineering Failure Analysis, 14 (1). pp. 158-163.

Das, Swapan K and Narasaiah, N and Sivaprasad, S and Chatterjee, S and Tarafder, S (2007) Effect of aging on fatigue crack growth behaviour of Cu bearing HSLA-100 steel. Materials Science and Technology, 23 (2). pp. 177-182.

Das, Swapan K and Tarafder, S and Panda, A K and Chatterjee, S and Mitra, A (2007) Magnetic and mechanical properties of Cu-strengthened aged HSLA-100 steel. Philosophical Magazine, 87 (32). pp. 5065-5078.

G

Ghosh, M and Singh, S R and Das, S K (2007) Metallurgical Analysis of the Damaged Wheel Hubs of AVRO HS-748 H-1517. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh, M and Singh, S R and Das, Swapan K (2007) Failure Investigation of Nose Jack Mounting Bracket of AVRO Aircraft H-1517. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh, R N (2007) NDE Centre for Infrastructure Asset Management. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Sivaprasad, S and Singh, S R and Ghosh, R N (2007) Failure Analysis of LP turbine free standing blade. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh Chowdhury, S and Datta, Sudarsan and Ravi Kumar, B and De, P K and Ghosh, R N (2007) Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel. Materials Science and Engineering A, 443 (1-2). pp. 114-119.

Ghosh Chowdhury, S and Ray, R K and Jena, A K (2007) Deformation-induced structural transformation in boron-doped Ni76Al24. Intermetallics, 15 (3). pp. 260-269.

Goswami, B and Ravi Kumar, B and Tarafder, S and Guguloth, K and Rupa, P K P and Kumar, S B and Ray, Ashok K (2007) Fatigue damage of a thermal barrier coated Ni-base superalloy. High Temperature Materials and Processes, 26 (3). pp. 209-219.

Goswami, B and Ray, Ashok K (2007) Studies on certain aspect of superconductivity with reference to high Tc superconductors. Journal of Metallurgy and Materials Science, 49 (4). pp. 183-213.

Guguloth, K (2007) Application of stress-relaxation testing method for evaluation of creep properties and remaining life asse-ssment of high temperature alloys. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

K

Kar, Abhijit and Chaudhuri, S and Sen, Pratik K and Ray, Ajoy K (2007) Evaluation of hardness of the interfacial reaction products at the alumina–stainless steel brazed interface by modeling of nanoindentation results. Scripta Materialia, 57 (9). pp. 881-884.

Kar, Abhijit and Ghosh, M and Ghosh, R N and Ray, Ajoy K (2007) Comparative study of tin lead and lead free solder joint interface. In: 2 nd International Conference on Recent Advances in Composite Materials (ICRACM-2007), February, 20-23, 2007, New Delhi.

Kar, Abhijit and Ghosh, M and Majumdar, Bhaskar S and Ghosh, R N and Ray, Ajoy K (2007) Interfacial microstructure, shear strength and electrical conductivity of Sn-3 center dot 5Ag-o center dot 5In/Cu lead free soldered joints. Materials Technology, 32 (3). pp. 161-165.

Kar, Abhijit and Ghosh, M and Ray, Ajoy K and Ghosh, R N (2007) Effect of copper addition on the microstructure and mechanical properties of lead free solder alloy. Materials Science and Engineering A, 459 (1-2). pp. 69-74.

Kar, Abhijit and Mandal, Sudipta and Ghosh, R N and Ghosh, T K and Ray, Ajoy K (2007) Role of Ti diffusion on the formation of phases in the Al2O3-Al2O3 brazed interface. Journal of Materials Science, 42 (14). pp. 5556-5561.

Kar, Abhijit and Mandal, Sudipta and Venkateswarlu, K and Ray, Ajoy K (2007) Characterization of interface of Al2O3–304 stainless steel braze joint. Materials Characterization, 58 (6). pp. 555-562.

Kar, Abhijit and Palit Sagar, S and Ray, Ajoy K (2007) Characterization of the ceramic–metal brazed interface using ultrasonic technique. Materials Letters, 61 (19-20). pp. 4169-4172.

Kar, Abhijit and Ray, Ajoy K (2007) Characterization of Al2O3–304 stainless steel braze joint interface. Materials Letters, 61 (14-15). pp. 2982-2985.

Khanra, A K and Godkhindi, M M and Pathak, L C (2007) Sintering behaviour of ultra-fine titanium diboride powder prepared by self-propagating high-temperature synthesis (SHS) technique. Materials Science and Engineering A, 454-455 . pp. 281-287.

Khanra, A K and Pathak, L C and Godkhindi, M M (2007) Microanalysis of debris formed during electrical discharge machining (EDM). Journal of Materials Science, 42 (3). pp. 872-877.

Khanra, A K and Sarkar, B R and Bhattacharya, B and Pathak, L C and Godkhindi, M M (2007) Performance of ZrB2–Cu composite as an EDM electrode. Journal of Materials Processing Technology, 183 (1). pp. 122-126.

Kumar, Ambuj (2007) Biomimetic synthesis and characterization of cobalt nanoparticles. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Kumar, S and Rao, B N and Pradhan, B (2007) Effect of impactor parameters and laminate characteristics on impact response and damage in curved composite laminates. Journal of Reinforced Plastics and Composites, 26 (13). pp. 1273-1290.

M

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Processing and mechanical properties of Al, A-Mg-2 and Al-Cu-4 alloy base short steel fibre reinforced composites prepared by vortex method. Materials Science and Technology, 23 (1). pp. 23-28.

Manoharan, S S and Singh, Brajendra and Sahu, Ranjan K (2007) Powder neutron diffraction evidence for enhanced inter plane magnetic coupling in La(1.2)Sr(1.8)Mn(2-x)Ru(x)O(7) layered manganites. Journal of Applied Physics, 101 (9).

Metya, Avijit Kumar and Parida, N and Bhattacharya, D K and Bandopadhyay, N R and Palit Sagar, S (2007) Assessment of Localized Plastic Deformation during Fatigue in Polycrystalline Copper by Nonlinear Ultrasonic. Metallurgical and Materials Transactions A, 38 (12). pp. 3087-3092.

Mishra, Suman K and Das, Swapan K and Sherbacov, V (2007) Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: A novel approach. Composites Science and Technology, 67 (11-12). pp. 2447-2453.

Mishra, Suman K and Rupa, P K P and Das, Swapan K and Shcherbakov, V (2007) Effect of titanium diluent on the fabrication of Al2O3–ZrB2 composite by SHS dynamic compaction. Composites Science and Technology, 67 (7-8). pp. 1734-1739.

Mishra, Suman K and Rupa, P K P and Pathak, L C (2007) Surface and nanoindentation studies on nanocrystalline titanium diboride thin film deposited by magnetron sputtering. Thin Solid Films, 515 (17). pp. 6884-6889.

Mishra, Suman K and Shekhar, Chander and Rupa, P K P and Pathak, L C (2007) Effect of pressure and substrate temperature on the deposition of nano-structured silicon–carbon–nitride superhard coatings by magnetron sputtering. Thin Solid Films, 515 (11). pp. 4738-4744.

Mitra, A and Mohapatra, J N and Swaminathan, J and Ghosh, M and Panda, A K and Ghosh, R N (2007) Magnetic evaluation of creep in modified 9Cr–1Mo steel. Scripta Materialia, 57 (9). pp. 813-816.

Mohan, B M and Ghosh, Arpita (2007) Influence of cross-point level of membership functions in fuzzy two-term control. International Journal of Automation and Control , 1 (2/3). pp. 133-144.

Mohan, B M and Ghosh, Arpita (2007) On the simplest fuzzy two - term controller structure derived via algebraic product t-norm -bounded sum t-conorm - Mamdani minimum inference combination. IEEE Proceedings on Industrial and Information Systems . pp. 97-100.

Mohapatra, J N and Panda, A K and Gunjan, M K and Bandopadhyay, N R and Mitra, A and Ghosh, R N (2007) Ageing behavior study of 5Cr–0.5Mo steel by magnetic Barkhausen emissions and magnetic hysteresis loop techniques. NDT & E International, 40 (2). pp. 173-178.

Mukhopadhyay, Amartya and Basu, Bikramjit and Das Bakshi, Srimanta and Mishra, Suman K (2007) Pressureless sintering of ZrO2–ZrB2 composites: Microstructure and properties. International Journal of Refractory Metals and Hard Materials, 25 (2). pp. 179-188.

N

Nayar, S and Sinha, Arvind (2007) Biomimetic route to hybrid nano-Composite scaffold for tissue engineering. In: Nanoscience and Nanotechnology Initiative (NSTI), 21-23 February, 2007, Katriya Hotel & Towers, Hyderabad.

P

Panda, A K and Das, Swapan K and De, P K and Mitra, A (2007) Sintering behaviour of magnetic bulk glassy cores obtained from Fe71Nb3.7Cu1Al3Mn0.8Si13.5B7 alloy powder. Journal of Materials Processing Technology, 184 (1-3). pp. 300-304.

Panda, A K and Ghosh, M and Kumar, Arvind and Singh, S R and Mitra, A (2007) Development of Ferromagnetic Shape Memory Alloys by Rapid Solidification Route. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Panda, A K and Kumari, Seema and Chattoraj, I and Ghosh, M and Mitra, A (2007) Electron transport properties of Co71−xFexCr7Si8B14 (x=0, 2, 3.2, 4, 6,8 and 12 at%) amorphous alloys during devitrification. Journal of Magnetism and Magnetic Materials, 308 (1). pp. 65-70.

Panda, A K and Mitra, A (2007) Deformation Behaviour Study of Micro-alloyed Steel by Magnetic Hysteresis Techniques. In: International Conference on Microalloying: Emerging Trends (Mcroalloying-2007, 9-11 March, 2007, Bengal engineering college and science , Howrah.

Panda, A K and Mohanta, Ojaswini and Kumar, A and Ghosh, M and Mitra, A (2007) A Potential Co36Fe36Si4B20Nb4 nanocrystalline alloy for high temperature soft magnetic applications. Philosophical Magazine, 87 (11). pp. 1671-1682.

Panda, A K and Mohanta, Ojaswini and Mitra, A and Jiles, D C and Lo, C C H and Melikhov, Y (2007) Soft magnetic properties of a high temperature CoFeSiBNb nanocrystalline alloy. Journal of Magnetism and Magnetic Materials, 316 (2). pp. 886-889.

Parida, N (2007) NDE techniques for corrosion monitoring in industrial systems. In: UNSPECIFIED.

Prasad, K and Kumari, K and Lily, and Chandra, K P and Yadav, K L and Sen, S (2007) Glass-like response of (Na1/2Bi1/2)TiO3–WO3 ceramic. Solid State Communications, 144 (1-2). pp. 42-45.

Prasad, K and Lily, and Kumari, K and Chandra, K P and Yadav, K L and Sen, S (2007) Electrical properties of a lead-free perovskite ceramic: (Na0.5Sb0.5)TiO3. Applied Physics A: Materials Science & Processing, 88 (2). pp. 377-383.

Prasad, K and Lily, and Kumari, K and Chandra, P and Yadav, K L and Sen, S (2007) Electrical properties of a lead-free perovskite ceramic: (Na0.5Sb0.5)TiO3. Applied Physics A-Materials Science & Processing, 88 (2). pp. 377-383.

R

Rajnikanth, V and Jindal, Vikas and Akkimardi, V G and Ghosh, M and Venkateswarlu, K (2007) Transmission electron microscopy studies on the effect of strain on Al and Al–1% Sc alloy. Scripta Materialia, 57 (5). pp. 425-428.

Ravi Kumar, B (2007) Influence of Cold Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. METALLURGICAL AND MATERIALS TRANSACTIONS A, 38A (9). pp. 2085-2094.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Das, Arpan (2007) Effect of large strains on grain boundary character distribution in AISI 304L austenitic stainless steel. Materials Science and Engineering A, 454-455 . pp. 239-244.

Ravi Kumar, B and Ghosh, M (2007) Surface and mid-plane texture evolution in austenite phase of cold rolled austenitic stainless steels. Materials Science and Engineering A, 457 (1-2). pp. 236-245.

Ravi Kumar, B and Ghosh Chowdhury, S and Narasaiah, N and Mahato, B and Das, Swapan K (2007) Role of Grain Boundary Character Distribution on Tensile Properties of 304L Stainless Steel. Metallurgical and Materials Transactions A, 38 (5). pp. 1136-1143.

Ravi Kumar, B and Mahato, B and Singh, Raghuvir (2007) Influence of Cold-Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. Metallurgical and Materials Transactions A, 38 (9). pp. 2085-2094.

Ray, Ajoy K and Kar, Abhijit and Ghosh, M (2007) Microstructural characterization of tin lead and lead free solder joint interface. In: Inter. Symp. on Advanced Materials and Processing, ISAMP-2007, 29-30 Oct. 2007, Basaveshwar Engineering College, Bagalkot..

Ray, Ashok K and Diwakar, K and Prasad, B N and Tiwari, Y N and Ghosh, R N and Whittenberger, J D (2007) Long term creep–rupture behaviour of 813 K exposed 2.25–1Mo steel between 773 and 873 K. Materials Science and Engineering A, 454-455 . pp. 124-131.

Ray, Ashok K and Dwarakadasa, E S and Das, D K and Ranganath, V R and Goswami, B and Sahu, J K and Whittenberger, J D (2007) Fatigue behavior of a thermal barrier coated superalloy at 800°C. Materials Science and Engineering A, 448 (1-2). pp. 294-298.

Ray, Ashok K and Tiwari, Y N and Roy, P K and Chaudhuri, S and Bose, S C and Ghosh, R N and Whittenberger, J D (2007) Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant. Materials Science and Engineering A, 454-455 . pp. 679-684.

Roy, A and Tarafder, S and Sivaprasad, S and Das, Swapan K and Manna, I and Chattoraj, I (2007) Fatigue crack growth retardation in an HSLA steel in benign environments. International Journal of Fatigue, 29 (2). pp. 254-260.

Roy, Nilima and Ghosh, R N and Bose, S C and Swaminathan, J (2007) A Stochastic Model for Assessment of Creep damage. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Rupa, P K P and Mishra, Suman K and Pathak, L C and Ghosh, R N (2007) Nanoindentation Studies of TiB2 films. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

S

Sahay, S K and Goswami, B and Kumar, S B and Ray, Ashok K (2007) Fatigue behaviour in titanium-based alloys. Journal of Metallurgy and Materials Science, 49 (2). pp. 97-122.

Sahay, S K and Goswami, B and Ray, Ashok K (2007) Development of cobalt-base alloys for high temperature applications. Journal of Metallurgy and Materials Science, 48 (1). pp. 1-38.

Sahay, S K and Kumar, S B and Goswami, B and Ray, Ashok K (2007) Recent developments in tungsten carbide-cobalt base cemented carbides. Journal of Metallurgy and Materials Science, 49 (3). pp. 143-173.

Sahay, S K and Singh, S K and Goswami, B and Kumar, S B and Ray, Ashok K (2007) Recent development in cobalt-base metallic glasses. Journal of Metallurgy and Materials Science, 48 (2). pp. 59-96.

Sahoo, K L and Sahu, Rina and Mitra, A (2007) Kinetic aspects of the nanocrystallization and evolution of microhardness in Al92-XNi8LaX amorphous alloys. Materials and Manufacturing Processes, 22 (4). pp. 497-501.

Sahu, Puspendu and Hamada, A S and Ghosh, R N and Karjalainen, L P (2007) X-ray Diffraction Study on Cooling-Rate-Induced γfcc→εhcp Martensitic Transformation in Cast-Homogenized Fe-26Mn-0.14C Austenitic Steel. Metallurgical and Materials Transactions A, 38 (9). pp. 1991-2000.

Sahu, Puspendu and Hamada, A S and Ghosh Chowdhury, S and Karjalainen, L P (2007) Structure and microstructure evolution during martensitic transformation in wrought Fe-26Mn-0.14C austenitic steel: an effect of cooling rate. Journal Of Applied Crystallography, 40 (2). pp. 354-361.

Sahu, Puspendu and Singh, S R and Mahato, B and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and Ghosh, R N (2007) y-y' Lattice misfit and its influence on the microstru-cture of UDIMET 520 during the rejevenation heat treatment : an X-ray diffraction study. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Sen, S (2007) Preparation and Evaluation of Structural, Microstructural and Electrical Properties of Polymer-Ceramic Composite. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Sen, S and Choudhary, R N P (2007) Dielectric relaxation in Sr modified PST ceramics. Applied Physics A: Materials Science & Processing, 87 (4). pp. 727-731.

Sen, S and Choudhary, R N P and Pramanick, P (2007) Structural and electrical properties of Ca2+-modified PZT electroceramics. Physica B: Condensed Matter, 387 (1-2). pp. 56-62.

Sen, S and Das, Swapan K and Mishra, Suman K and Tarafder, A (2007) Low-temperature synthesis of 0.65 PbMg1/3Nb2/3O3-0.35PbTiO(3) ceramics. Journal of the American Ceramic Society, 90 (8). pp. 2634-3638.

Singh, K A and Pathak, L C and Roy, S K (2007) Effect of citric acid on the synthesis of nano-crystalline yttria stabilized zirconia powders by nitrate–citrate process. Ceramics International, 33 (8). pp. 1463-1468.

Singh, Navin Kumar and Pramanick, A K (2007) Study of cementite and ferrite interface by AFM. Training Report (TR). CSIR-NML, Jamshdpur. (Unpublished)

Singh, S R (2007) Material Equivalence of Russain Materials for Invar Missile. Consultancy (CNP). CSIR-NML, Jamshedpur. (Submitted)

Singh, S R and Das, S K and Gunjan, M K (2007) Flying Accident to Mig-21/C-1129 of MOFTU 'A'/11 Wg/Eac. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Singh, S R and Das, Swapan K (2007) Failure Analysis of Cables of Undercarriage Door Control Mechanism : AN-32 Aircraft. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Sinha, Arvind and Das, Goutam and Sharma, Binay Kumar and Roy, Raja Prabahan and Pramanick, A K and Nayar, S (2007) Poly(vinyl alcohol)–hydroxyapatite biomimetic scaffold for tissue regeneration. Materials Science and Engineering C, 27 (1). pp. 70-74.

Sivaprasad, S and Ghosh, M and Das, Swapan K and Ghosh Chowdhury, S and Tarafder, S (2007) Evolution of Deformation-Induced Martensite during Fatigue Deformation of AISI 304LN Stainless Steel. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Sivaprasad, S and Tarafder, S (2007) Corrosion of stressed components. In: Training programme on industrial corrosion: Evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 68-91.

Sridhar, G and Singh, S R (2007) Opinion on the Cause of Damage of Last Stage Blade of 37 MW Steam Turbine of Monnet Ispat and Energy Ltd., Raigarh, Chattisgarh. Consultancy (CNP). CSIR-NML, Jamshedpur. (Submitted)

Sridhar, G and Singh, S R and Das, Swapan K and Gunjan, M K and Rupa, P K P (2007) Failure Analysis of Damaged parts of a Roller press at Jay Pee Bela Cement Plant, M.P. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Swaminathan, J and Krishna, G and Gunjan, M K and Mahato, B and Ravi Kumar, B and Hansda, K L and Sharma, R K and Upadhyay, A K (2007) Failure Analysis of Water wall Tubes of Boiler No.7. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

T

Tarafder, S and Sivaprasad, S and Ranganath, V R (2007) Comparative assessment of fatigue and fracture behaviour of cast and forged railway wheels. Fatigue and Fracture of Engineering Materials and Structures, 30 (9). pp. 863-876.

Tarafder, S and Sivaprasad, S and Ray, K K (2007) Ductile fracture behaviour of primary heat transport piping material. Materials Science and Technology, 23 (11). pp. 1285-1293.

V

Venkataraman, R and Das, Goutam and Singh, S R and Ghosh, R N and Venkataraman, B and Krishnamurty, R (2007) Study on influence of porosity, pore size, spatial and topological distribution of pores on microhardness of as plasma sprayed ceramic coatings. Materials Science and Engineering A, 445-446 . pp. 269-274.

Venkateswarlu, K and Ghosh Chowdhury, S and Pathak, L C and Ray, Ajoy K (2007) Microstructural examination of service exposed coal mill liner material. Materials Characterization, 58 (10). pp. 1029-1032.

This list was generated on Thu Mar 28 22:43:17 2024 IST.