Items where Year is 2019

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | G | K | M | N | P | R | S | V | Y
Number of items: 38.

A

Abhilash, and Meshram, Pratima and Sinha, Shivendra and Pandey, B D and Kumari, V K and Kar, S (2019) Chloride leaching of lanthanum and cerium from Indian red mud and metal separation studies. Metallurgical Research and Technology, 116(2) .

Adeleke, A A and Odusote, J K and Dayanand, D and Lasode, O A and Malathi, M (2019) Influence of torrefaction on lignocellulosic woody biomass of nigerian origin. Journal of Chemical Technology and Metallurgy, 54 . pp. 274-285.

B

Bansal, G.K. and Pradeep, M and Ghosh, C and Rajinikanth, V and Srivastava, V C and Bhagat, A N and Kundu, S (2019) Evolution of Microstructure in a Low-Si Micro-alloyed Steel Processed Through One-Step Quenching and Partitioning. Metallurgical and Materials Transactions A, 50(2) . pp. 547-555.

Bhattacharya, A and Karmakar, A and Karani, A and Ghosh, M and Chakrabarti, D (2019) Processing of Ultrafine-Grained Steels by Warm Rolling and Annealing. Journal of Materials Engineering and Performance, 28(2) . pp. 753-768.

Bhattacharyya, Pallab and Lee, J H and Kar, K K and Park, H S (2019) Carambola-shaped SnO2 wrapped in carbon nanotube network for high volumetric capacity and improved rate and cycle stability of lithium ion battery. Chemical Engineering Journal, 369 . pp. 422-431.

D

Das, B and Hossain, S M and Pramanick, A K and Dey, A and Ray, Mallar (2019) One-Pot Synthesis of Gel Glass Embedded with Luminescent Silicon Nanoparticles. ACS Appl. Mater. Interfaces, 11(2) . pp. 2507-2515.

Dey, R and Das, Anindya and Tarafder, Soumitra and Sivaprasad, S (2019) State of Grain Boundary Misorientation Due to Multiaxiality in Austenitic Stainless Steel. Metallurgical and Materials Transactions A , 50(1) . pp. 47-51.

Dey, R and Tarafder, S and Sivaprasad, S (2019) Influence of proportional and non-proportional loading on deformation behaviour of austenitic stainless steel-macro and micro analysis. Theoretical and Applied Fracture Mechanics, 100 (IF-2.215). pp. 342-353.

G

Ghosh, Arpita and Sahu, M K and Singh, P K and Kumar, S and Ghosh, M and Palit Sagar, S (2019) Assessment of Mechanical Properties for Dissimilar Metal Welds: A Nondestructive Approach. Journal of Materials Engineering and Performance, 28(2) . pp. 900-907.

Ghosh, Rachit and Gupta, S K and Kumar, Anil and Kumar, Sanjay (2019) Durability and Mechanical Behavior of Fly AshGGBFS Geopolymer Concrete Utilizing Bottom Ash as Fine Aggregate. Journal Transactions of the Indian Ceramic Society, 78(1) (IF-0.761). pp. 24-33.

K

Kumar, Manoj and Datta, Saurav and Gupta, R K (2019) Electro-discharge Machining Performance of Ti–6Al–4V Alloy: Studies on Parametric Effect and Phenomenon of Electrode Wear. Arabian Journal for Science and Engineering, 44(2) . pp. 1553-1568.

Kumari, Aarti and Sahu, K K and Sahu, Sumanta Kumar (2019) Solvent Extraction and Separation of Nd, Pr and Dy from Leach Liquor of Waste NdFeB Magnet Using the Nitrate Form of Mextral (R) 336At in the Presence of Aquo-Complexing Agent EDTA. Metals - Open Access Metallurgy Journal, 9(2) . pp. 1-18.

Kumari, Archana and Jha, Manis K and Pathak, Devendra Deo and Chakravarty, S and Lee, Jae-chun (2019) Processes developed for the separation of europium (Eu) from various resources. Separation & Purification Reviews - (formerly Separation and Purification Methods), 48(2) . pp. 91-121.

M

Makhija, Dilip and Rath, R K and Mukherjee, A K (2019) Application of enhanced gravity technique for separation of iron phase from LD slag. Metallurgical Research and Technology, 116(3) . p. 303.

Mandal, Soumen and Kailath, A J (2019) Enhanced Plasticity of Cu-Zr-Ti Bulk Metallic Glass and Its Correlation with Fragility. Metallurgical and Materials Transactions A, 50(1) . pp. 199-208.

Meshram, Pratima and Abhilash, and Pandey, B D (2019) Advanced Review on Extraction of Nickel from Primary and Secondary Sources. Mineral Processing and Extractive Metallurgy Review, 40(3) (IF-2.117). pp. 157-193.

Meshram, Pratima and Pandey, B D and Abhilash, (2019) Perspective of availability and sustainable recycling prospects of metals in rechargeable batteries – A resource overview. Resources Policy, 60 . pp. 9-22.

Metya, Avijit Kumar and Tarafder, Soumitra and Balasubramaniam, Krishnan (2019) Characterization of Tempering Behaviour of Modified 9Cr-1Mo Steel by Ultrasonic Lamb wave Mixing. materialstoday: PROCEEDINGS, 11 . pp. 695-699.

Mohanty, Ashok and Chakladar, Saswati and Mallick, Subhajit and Chakravarty, S (2019) Structural characterization of coking component of an Indian coking coal. Fuel, 249 (IF-4.908). pp. 411-417.

Munda, Parikshit and Husain, M M and Soni, M K and Kumar, Pankaj and Rajinikanth, V (2019) Metallurgical Investigation of the Collapsed Front Structure of a Dragline in a Coal Mine. Journal of Failure Analysis and Prevention . pp. 1-16.

N

Nath, S K and Kumar, Sanjay (2019) Role of alkali concentration on reaction kinetics of fly ash geopolymerization. Journal of Non-Crystalline Solids, 505 (IF-2.488). pp. 241-251.

P

Pal, Jagannath and Ghorai, S and Venugopalan, T (2019) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy . (In Press)

Patel, N K and Walunj, Mahesh and Ravi Kumar, B (2019) Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel. Journal of Materials Engineering and Performance, 28(3) . pp. 1391-1401.

R

Rai, R K and Sahu, J K and Pramanick, A K and Paulose, N and Fernando, D C and Das, Swapan K (2019) Creep deformation micro-mechanisms of CM 247 DS LC Ni-base superalloy under relevant service condition. Materials Characterization, 150 . pp. 155-165.

Raj, R and Kumari, Aarti and Sahu, D K and Prasad, Ranjit and Ranganathan, S (2019) Carbothermic Reduction of Iron Oxide Waste Generated During the Processing of Ilmenite. Transactions of the Indian Institute of Metals, 72(1) . pp. 11-16.

Randhawa, N S and Prasad, Sanjay (2019) Direct Carbothermic Reduction of Weathered Ilmenite for Efficient Removal of Iron by Leaching. METALLURGICAL AND MATERIALS TRANSACTIONS B, 50B (IF-1.834). pp. 1277-1289.

Ravikiran, K and Das, Goutam and Kumar , Suranjit and Singh , PK and Sivaprasad, K and Ghosh, M (2019) Evaluation of Microstructure at Interfaces of Welded Joint Between Low Alloy Steel and Stainless Steel. Met. Mats, trans A .

Roy, Amritendu and Ghosh, M and Gourkar, H and De, PS (2019) Microstructure, indentation and first principles study of AlCuFeMn alloy. Materialia, 5 . p. 100206.

S

Sarkar, C and Sahu, Sumanta Kumar and Sinha, Arvind and Chakraborty, Jui and Garai, Subhadra (2019) Facile synthesis of carbon fiber reinforced polymer-hydroxyapatite ternary composite: A mechanically strong bioactive bone graft. Materials Science and Engineering: C , 97 . pp. 388-396.

Senguttuvan, Anand and Chalavadi, G and Singh, Ranjeet K and Das, Achintya (2019) CFD Simulation of Dry Density Separation of Iron Ore Fines. In: AISTech Conference Proceedings, May 6-9, 2019, USA.

Singh, Charu and Tiwari, S K and Singh, Raghuvir (2019) Exploring environment friendly nickel electrodeposition on AZ91 magnesium alloy: Effect of prior surface treatments and temperature of the bath on corrosion behaviour. Corrosion Science, 151 . pp. 1-19.

Singh, G and Nanda, T and Miadad, S J and Gorain, N C and Venugopalan, T and Kumar, B Ravi (2019) Correlation between Lüders band formation and precipitation kinetics behaviour during the industrial processing of interstitial free high strength steels. Archives of Civil and Mechanical Engineering , 19(2) . pp. 469-483.

Singh, R K and Sahu, J K (2019) Influence of hold type and duration on cyclic deformation behaviour of IN740H. Materials Science and Technology, 35(4) . pp. 488-499.

Singla, Rashmi and Kumar, Sanjay and Alex, T C (2019) Reactivity Alteration of Granulated Blast Furnace Slag by Mechanical Activation for High Volume Usage in Portland Slag Cement. Waste and Biomass Valorization .

Singla, Rashmi and Tripathy, S and Das, Suchandan K (2019) An integrated phenomenological process model for prediction of oxygen pickup during open air tapping and pouring of liquid steel. Chemical Engineering Science, 203 (IF-3.306). pp. 391-401.

Sinha, P and Chakravarty, S and Singh, Raghuvir and Singh, P K and Murthy, G V S (2019) Magnetization study of the sensitization in SS304LN. Materials Research Bulletin Volume 109, January 2019, Pages 149-154, 109 . pp. 149-154.

V

Verma, D and Banerjee, D and Mishra, Suman K (2019) Effect of Silicon Content on the Microstructure and Mechanical Properties of Ti-Si-B-C Nanocomposite Hard Coatings. Metallurgical and Materials Transactions A, 50(2) . pp. 894-904.

Y

Yadav, B S and Sahu, Ranjan K and Pramanick, Ajit Kumar and Mishra, T and Alam, A and Bharti, M and Mukherjee, S and Kumar, S and Nayar, S (2019) Collagen functionalized graphene sheets decorated with in situ synthesized nano hydroxyapatite electrospun into fibers. Materials Today Communications, 18 . pp. 167-175.

This list was generated on Mon May 20 14:01:48 2019 IST.