Items where Subject is "Metallurgy > Metals Corrosion"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Number of items at this level: 79.

Article

Al-Negheimish, Abdulaziz and Hussain, R R and Alhozaimy, Abdulrahman (2021) Corrosion performance of hot-dip galvanized zinc-aluminum coated steel rebars in comparison to the conventional pure zinc coated rebars in concrete environment. Construction and Building Materials, 274 . p. 121921.

Ananda Kumar, S and Shree Meenakshi, K and Sankara Narayanan, T S N and Srikanth, S (2008) Corrosion resistant behaviour of PANI–metal bilayer coatings. Progress in Organic Coatings, 62 (3). pp. 285-292.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2003) Electroless Ni–P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.

Balusamy, T and Satendra, Kumar and Sankara Narayanan, T S N (2010) Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel. Corrosion Science, 52 . pp. 3826-3834.

Balusamy, T and Satendra , Kumar and Sankara Narayanan, T S N (2011) Electrochemical behaviour of surface modified AISI 304 grade stainless steel in ringer’s solution. Transactions of the Indian Institute of Metals, 64 (4-5). pp. 507-511.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Comparative Studies on Al-Based Composite Powder Reinforced with Nano Garnet and Multi-wall Carbon Nanotubes. Journal of Materials Engineering and Performance, 24(11) (IF-0.998). pp. 4200-4205.

Baskaran, Irusen and Sankara Narayanan, T S N and Seshadri, S K (2001) Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy. Journal of Solid State Electrochemistry, 5 (5). pp. 334-338.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2009) Corrosion resistance of electroless Ni–low B coatings. Transactions of the Institute of Metal Finishing, 87 (4). pp. 221-224.

Bhattamishra, A K and Mishra, G S and Banerjee, M K (1991) Influence of silicon/iron ratio on corrosion behaviour of aluminium-silicon alloys in inorganic and organic acids. Anti-Corrosion Methods and Materials, 38 (2). pp. 4-13.

Chatterjee, P and Singh, D D N (1991) H2S Corrosion control of steel by using pyridine compounds. Anti-Corrosion Methods and Materials, 38 (1). pp. 4-10.

Das, Swapan K and Bhattacharya, D K (2003) Corrosion failure of Zn–Al detonator housing. Engineering Failure Analysis, 10 (6). pp. 639-643.

Dey, Swapna and Das, S K and Basumallick, A and Chattoraj, I (2010) The Effect of pitting on fatigue lives of peak-aged and overaged 7075 aluminum alloys. Metallurgical and Materials Transactions A , 41A . pp. 3297-3307.

Dey, Swapna and Mandhyan, A K and Sondhi, S K and Chattoraj, I (2006) Hydrogen entry into pipeline steel under freely corroding conditions in two corroding media. Corrosion Science, 48 (9). pp. 2676-2688.

Hussain, Raja Rizwan and Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Singh, D D N (2020) Corrosion characteristics of vanadium micro-alloyed steel reinforcement bars exposed in concrete environments and industrially polluted atmosphere. Cement and Concrete Composites, 113(4) .

Jegannathan, S and Arumugam, T K and Sankara Narayanan, T S N and Ravichandran, K (2009) Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: Cathodic vs. anodic. Progress in Organic Coatings, 65 (2). pp. 229-236.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Evaluation of the corrosion resistance of phosphate coatings obtained by anodic electrochemical treatment. Progress in Organic Coatings, 57 (4). pp. 392-399.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Formation of zinc phosphate coating by anodic electrochemical treatment. Surface and Coatings Technology, 200 (20-21). pp. 6014-6021.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Formation of zinc–zinc phosphate composite coatings by cathodic electrochemical treatment. Surface and Coatings Technology, 200 (12-13). pp. 4117-4126.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2005) Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests. Electrochimica Acta, 51 (2). pp. 247-256.

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) Anodic Dissolution Behaviour of Tungsten Carbide Scraps in Ammoniacal Media. Advanced Material Research, 828 (IF-). pp. 11-20.

Krishna, K Gopala and Sivaprasad, S and Sankara Narayanan, T S N and Kumar, K C Hari (2012) Localized corrosion of an ultrafine grained Al-4Zn-2Mg alloy produced by cryorolling. Corrosion Science, 60 . pp. 82-89.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Corrosion resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Alloys and Compounds, 480 (2). pp. 765-770.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2008) Electrodeposited Ni–B–Si3N4 composite coating: Preparation and evaluation of its characteristic properties. Journal of Alloys and Compounds, 466 (1-2). pp. 412-420.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2012) Electroless Ni-B-Si3N4 composite coating: deposition and evaluation of its characteristics properties. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42(7) . pp. 920-927.

Mahato, R Raman and Bhattamishra, A K and Singh, R and Jayakrishnan, P (2001) Corrosion behaviour of painted HSLA panels in chloride environment – a comparative study of different paints. Anti-Corrosion Methods and Materials, 48 (3). pp. 188-194.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Sinha, R K and Bhattacharya, D K and Chaudhuri, S (1999) Remaining life estimation of a service exposed economiser tube. Engineering Failure Analysis, 6 (4). pp. 233-243.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2006) Effect of fretting amplitude and frequency on the fretting corrosion behaviour of tin plated contacts. Surface and Coatings Technology, 201 (6). pp. 2181-2192.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Effect of temperature on the fretting corrosion of tin plated copper alloy contacts. Wear, 262 (3-4). pp. 320-330.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2008) Fretting corrosion of tin-plated contacts. Tribology International, 41 (7). pp. 616-628.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Fretting corrosion of tin-plated contacts: Evaluation of surface characteristics. Tribology International, 40 (3). pp. 548-559.

Rao, G S and Yagodzinskyy, Y and Que, Z and Spatig, P and Seifert, H-P (2021) Study on hydrogen embrittlement and dynamic strain ageing on low-alloy reactor pressure vessel steels. Journal of Nuclear Materials, 556 .

Ravi Kumar, B and Singh, Raghuvir and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2005) Effect of texture on corrosion behavior of AISI 304L stainless steel. Materials Characterization, 54 (2). pp. 141-147.

Ravichandran, K and Sivanandh, H and Sundara Raman, Ganesh and Hariharasudan, T and Sankara Narayanan, T S N (2000) Acceleration of the phosphating process—the utility of galvanic coupling. Metal Finishing, 98 (9). pp. 48-54.

Sahoo, Biraj K and Deva, Anjana and Pandey, Pratiksha and Meena, L K and Ghosh Chowdhury, S and Jha, Bimal Kumar (2020) Microstructure–Property Correlation in High-Strength Formable Steel with Varying Nb-Si Content. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 1901-1908.

Sankara Narayanan, T S N (2005) Surface pretretament by phosphate conversion coatings - A review. Reviews in Advanced Materials Science, 9 . pp. 130-177.

Sankara Narayanan, T S N and Baskaran, Irusen and Krishnaveni, K and Parthiban, S (2006) Deposition of electroless Ni–P graded coatings and evaluation of their corrosion resistance. Surface and Coatings Technology, 200 (11). pp. 3438-3445.

Sankara Narayanan, T S N and Jegannathan, S and Ravichandran, K (2006) Corrosion resistance of phosphate coatings obtained by cathodic electrochemical treatment: Role of anode–graphite versus steel. Progress in Organic Coatings, 55 (4). pp. 355-362.

Sankara Narayanan, T S N and Krishnaveni, K and Seshadri, S K (2003) Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Materials Chemistry and Physics, 82 (3). pp. 771-779.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Evaluation of the performance of electroless Ni-B coated brass contacts under fretting conditions. Surface Review and Letters (srl), 15 (4). pp. 443-452.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Fretting corrosion of lubricated tin plated copper alloy contacts: Effect of temperature. Tribology International, 41 (2). pp. 87-102.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Fretting corrosion of lubricated tin-plated contacts. Industrial Lubrication and Tribology, 60 (5). pp. 233-241.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2007) Fretting-corrosion mapping of tin-plated copper alloy contacts. Wear, 262 (1-2). pp. 228-233.

Sankara Narayanan, T S N and Seshadri, S K (2004) Formation and characterization of borohydride reduced electroless nickel deposits. Journal of Alloys and Compounds, 365 (1-2). pp. 197-205.

Satendra, Kumar and Sankara Narayanan, T S N (2008) Corrosion behaviour of Ti–15Mo alloy for dental implant applications. Journal of Dentistry, 36 (7). pp. 500-507.

Satendra, Kumar and Sankara Narayanan, T S N (2009) Electrochemical characterization of Beta-Ti alloy in Ringer’s solution for implant application. Journal of Alloys and Compounds, 479 (1-2). pp. 699-703.

Satendra, Kumar and Sankara Narayanan, T S N (2011) Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium. Journal of Applied Electrochemistry, 41 . pp. 123-127.

Satendra, Kumar and Sankara Narayanan, T S N and Manimaran, A and Suresh Kumar, M (2007) Effect of lead content on the dezincification behaviour of leaded brass in neutral and acidified 3.5% NaCl solution. Materials Chemistry and Physics, 106 (1). pp. 134-141.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2009) Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time. Materials Science and Engineering C, 29 (6). pp. 1942-1949.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization. Materials Chemistry and Physics, 119 (1-2). pp. 337-346.

Satendra, Kumar and Sankara Narayanan, T S N and Suresh Kumar, M and Manimaran, A (2006) Dezincification of Brass in Sulfide Polluted Sodium Chloride Medium: Evaluation of the Effectiveness of 2-Mercaptobenzothiazole. International Journal of Electrochemical Science, 1 (8). pp. 456-469.

Singh, D D N and Ghosh, Rita and Singh, B K (2002) Fluoride induced corrosion of steel rebars in contact with alkaline solutions, cement slurry and concrete mortars. Corrosion Science, 44 (8). pp. 1713-1735.

Singh, D D N and Singh, T B and Gaur, B (1995) The role of metal cations in improving the inhibitive performance of hexamine on the corrosion of steel in hydrochloric acid solution. Corrosion Science, 37 (6). pp. 1005-1019.

Singh, D D N and Yadav, Shyamjeet and Saha, Jayant K (2008) Role of climatic conditions on corrosion characteristics of structural steels. Corrosion Science, 50 (1). pp. 93-110.

Singh, M N and Singh, Inder and Pandey, J L (1997) High temperature corrosion-resistant coating on steel for short-term application. Anti-Corrosion Methods and Materials, 44 (2). pp. 90-93.

Singh, Raghuvir and Dahotre, N B (2005) Tribology of laser modified surface of stainless steel in physiological solution. Journal of Materials Science, 40 . pp. 5619-5626.

Singh, Raghuvir and Kurella, A and Dahotre, N B (2006) Laser Surface Modification of Ti–6Al–4V: Wear and Corrosion Characterization in Simulated Biofluid. Journal of Biomaterials Applications, 21 (1). pp. 49-73.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Tarafder, Mita and Ray, K K (2006) Corrosion fatigue crack growth behaviour of naval steels. Corrosion Science, 48 (8). pp. 1996-2013.

Srikanth, S and Sankara Narayanan, T S N and Gopalakrishna, K and Narasimhan, B R V (2005) Corrosion in a buried pressurised water pipeline. Engineering Failure Analysis, 12 (4). pp. 634-651.

Book or NML Publication

UNSPECIFIED (2007) Corrosive failures and analysis: some NML experiences. In: Chattoraj, I and Singh, R and Mandhyan, A K and Ghosh, S, (eds.) Training programme on industrial corrosion: evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 92-118.

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro - and electroless deposited composite coatings: preparation, characteristics and applications. In: Encyclopedia of composites. Wiley, Hoboken, N J.

Singh, D D N (2007) Corrosion inhibitors. In: Training programme on industrial corrosion: evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 119-134.

Singh, Raghuvir (2007) Corrosion evaluation and monitoring practices. In: Training programme on industrial corrosion: evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 48-67.

Sivaprasad, S and Tarafder, S (2007) Corrosion of stressed components. In: Training programme on industrial corrosion: Evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 68-91.

Conference or Workshop Item

Chattoraj, I (2007) Fundamentals of corrosion and its prevention. In: UNSPECIFIED.

Mandhyan, A K (2007) Corrosion of metals and its prevention. In: Training programme on industrial corrosion: evaluation and mitigation,, 5-7 December 2007, CSIR-NML.

Narang, S K and Mukherjee, A N (1999) Cathodic protection: introduction and recent developments. In: The 111th Asian-Pacific corrosion control conference, 1999, Vietnam.

Parida, N (2007) NDE techniques for corrosion monitoring in industrial systems. In: UNSPECIFIED.

Singh, D D N and Singh, B K and Ghosh, Rita (2001) Reliable evaluation techniques for localized corrosion damages. In: Recent trends in structural integrity assessment: Proceedings of workshop, Jan 18-19, 2001, NML Jamshedpur, India.

Singh, Raghuvir and Das, Goutam and Suman, Satyarth and Singh, P K (2008) Response of Weld Joints in Stainless Steel 304LN Pipe to Low Temperature Sensitization. In: IIW- IC-2008 Chennai, 8-10 January, 2008, Chennai.

Presentation Slide

Sankara Narayanan, T S N (2010) Corrosion Science and Engineering. [Presentation Slide] (Unpublished)

Project Reports

Mitra, M S and Vaidyanath, L R (1951) The Influence of Wear-product in Accelerating Wear. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Munda , Parikshit and Das, Swapan K and Ghosh Chowdhury, S and Das, Goutam and Singh, S R (2010) Investigation on the Failure of Gear Pump. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Evaluation of corrosion performance of reinforcement steel. Sponsored (SSP). NML, Chennai Centre, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Studies on the Electrochemical Behaviour of Ti-Mo Alloys In Fluoride Medium to assess their Suitability for Dental Implant Applications (OLP-0073). Exploratory (OLP). NML, NML, Chennai Centre. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Tarafder, S (2010) Technology for Engineering Critical Assessment: Project Completion Report. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Thesis

Krishnaveni, K (2008) Studies on Ni-B and Ni-B-Si3N4 composite coatings obtained by electro- and electroless deposition processes. PhD thesis, University of Madras .

Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.

This list was generated on Fri Mar 29 14:18:27 2024 IST.