Items where Subject is "Metallurgy > Steel Metallurgy"

Article

Akhtar, M and Khajuria, A (2019) Probing true creep-hardening interaction in weld simulated heat affected zone of P91 steels. Journal of Manufacturing Processes, 46 (IF-3.462). pp. 345-356.

Akhtar, M and Khajuria, A (2019) Probing True Microstructure‑Hardening Relationship in Simulated Heat Affected Zone of P91B Steels. Metallography, Microstructure, and Analysis . pp. 656-677.

Akhtar, M and Khajuria, A (2022) The Synergistic Effects among Crystal Orientations, Creep Parameters, Local Strain, Macro-Microdeformation, and Polycrystals' Hardness of Boron Alloyed P91 Steels. Steel Research International .

Ammasi, A and Ul Haque, M U (2023) Influence of rare earth metals on inclusion modification of dual phase steel Influence des metaux de terres rares sur la modification des inclusions de l'acier biphase. Canadian Metallurgical Quarterly .

Anumola, R and Ravi Kumar, B and Misra, R D K and Mannering, T and Panda, D and Jansto, S G (2008) On the determining role of microstructure of niobium-microalloyed steels with differences in impact toughness. Materials Science and Engineering A, 491 (1-2). pp. 55-61.

Bansal, G K and Madhukar, D A and Chandan, A.K. and Ashok, K and Mandal, G K and Srivastava, V C (2018) On the intercritical annealing parameters and ensuing mechanical properties of low-carbon medium-Mn steel. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 733 (IF-4.081). pp. 246-256.

Bansal, G K and Pradeep, M and Ghosh, C and Rajnikanth, V and Srivastava, V C and Bhagat, A N and Kundu, S (2019) Evolution of Microstructure in a Low-Si Micro-alloyed Steel Processed Through One-Step Quenching and Partitioning. Metallurgical and Materials Transactions A , 50(2) (IF-1.985). pp. 547-555.

Bansal, G K and Rajnikanth, V and Ghosh, C and Srivastava, V C and Kundu, S and Ghosh Chowdhury, S (2018) Microstructure–Property Correlation in Low-Si Steel Processed Through Quenching and Nonisothermal Partitioning. Metallurgical and Materials Transactions A, 49(8) (IF-1.985). pp. 3501-3514.

Bansal, G K and Srivastava, V C and Ghosh Chowdhury, S (2019) Role of solute Nb in altering phase transformations during continuous cooling of a low-carbon steel. Materials Science and Engineering: A, 767 (IF-4.081). p. 138416.

Beato-lopez, J J and De la cruz blas, Ca and Mitra, Amitava and Gomez-polo, C (2016) Electrical model of giant magnetoimpedance sensors based on continued fractions. Sensors and Actuators A - Physical, 242 (IF-2.499). pp. 73-78.

Bharathy, R Sundara and Venugopalan, T and Ghosh, M (2022) A Study on Brittle Cleavage Fracture on Ti-Mo Nano-precipitation-Strengthened High-Strength Steel. J of Mats. Engg. Performance .

Bhatnagar, S S and Datar, N S and Guha, B K and Chattopadhyay, R and Sinha, R K (1977) High strength low alloy structural steels. NML Technical Journal, 19 (1). pp. 1-7.

Bhojani, A and Rao, V J and Vaish, Ashok Kumar and Bhatnagar, S K and Kumar, M (2018) Development of roasting-leaching route to produce iron ore concentrate at par with the composition of medium/high grade iron ore from low grade iron ore and iron ore slimes suitable for steel making. Journal of Metallurgy and Materials Science, 60(4) . pp. 189-202.

Biswas, Somjeet and Sivaprasad, S and Narasaiah, N and Tarafder, S and Chakraborti, P C (2007) Load history effect on FCGR behaviour of 304LN stainless steel. International Journal of Fatigue, 29 (4). pp. 786-791.

Bucknall, E H and Steven, W (1949) Hardening response of steels. Progress in Metal Physics, 1 . pp. 235-258.

Chandan, A K and Bansal, G K and Kundu, J and Chakraborty, J and Ghosh Chowdhury, S (2019) Effect of prior austenite grain size on the evolution of microstructure and mechanical properties of an intercritically annealed medium manganese steel. Materials Science and Engineering: A , 768 (IF-4.081). p. 138458.

Chandan, A K and Mishra, G and Mahato, B and Ghosh Chowdhury, S and Kundu, S and Chakraborty, J (2019) Stacking Fault Energy of Austenite Phase in Medium Manganese Steel. Metallurgical and Materials Transactions A , 50(10) (IF-1.985). pp. 4851-4866.

Chapman, J A and Phillips, R and Craik, R L (1965) Pearlite free structural steels. NML Technical Journal, 7 (1). pp. 27-31.

Chatterjea, A B and Nijhawan, B R (1960) Stress-corrosion failure of austenitic stainless steel. NML Technical Journal, 2 (3). pp. 20-25.

Chaudhary, P N and Pal, J and Singh, D P and Singh, M and Ghosh, Sukomal (2004) Dephosphorization of steelmaking slag. Transactions of the Indian Institute of Metals, 57 (5). A5.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2010) Assessment of creep and rupture behavior of 2.25Cr-1Mo steel — A strain based approach and its limitation. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 403-409.

Chaudhuri, S P and Mahanti, R K and Sivaramakrishnan, C S and Singh, M P (2002) Physical properties of some thermomechanically processed microalloyed steels. Materials & Design, 23 (5). pp. 489-496.

Das, A and Tarafder, S and Sivaprasad, S and Chakrabarti, D (2019) Influence of microstructure and strain rate on the strain partitioning behaviour of dual phase steels. Materials Science and Engineering A, 754 . pp. 348-360.

Das, Arpan and Sivaprasad, S and Ghosh, M and Chakraborti, P C and Tarafder, S (2008) Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel. Materials Science and Engineering A, 486 (1-2). pp. 283-286.

Das, Arpan and Tarafder, S (2008) Geometry of dimples and its correlation with mechanical properties in austenitic stainless steel. Scripta Materialia, 59 (9). pp. 1014-1017.

Das, Swapan K and Sivaprasad, S and Das, S and Tarafder, S (2006) The effect of variation of microstructure on fracture mechanics parameters of HSLA-100 steel. Materials Science and Engineering A, 431 (1-2). pp. 68-79.

Das, Swapan K and Tarafder, S and Panda, A K and Chatterjee, S and Mitra, A (2007) Magnetic and mechanical properties of Cu-strengthened aged HSLA-100 steel. Philosophical Magazine, 87 (32). pp. 5065-5078.

Deva, A and Pandey, P and Alam, M S and Sahoo, Biraj K and Kumar, B Ravi and Choudhary, S G and Jha, B K (2021) Processing of Low-Carbon Deep-Drawing Steel with High Plastic Anisotropy Using Two-Stage Batch Annealing Cycle. Journal of Materials Engineering and Performance .

Deva, Anjana and Sahoo, Biraj K and Chowdhury, S G (2023) Boron Containing Low Carbon Deep Drawing Continuous Annealed Steel Sheet with Improved Plastic Anisotropy. Transactions of the Indian Institute of Metals .

Dey, R and Das, A and Tarafder, S and Sivaprasad, S (2019) State of Grain Boundary Misorientation Due to Multiaxiality in Austenitic Stainless Steel. Metallurgical and Materials Transactions A , 50(5) (IF-1.985). pp. 47-51.

Dey, R and Tarafder, S and Sivaprasad, S (2019) Influence of proportional and non-proportional loading on deformation behaviour of austenitic stainless steel-macro and micro analysis. Theoretical and Applied Fracture Mechanics, 100 . pp. 342-353.

Dey, Rima and Tarafder, Soumitra and Bar, H and Sivaprasad, S (2020) Correlating Effect of Temperature on Cyclic Plastic Deformation Behavior with Substructural Developments for Austenitic Stainless Steel. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 480-496.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, Sanjay (2016) Mechanical activation of volcanic ash for geopolymer synthesis: effect on reaction kinetics, gel characteristics, physical and mechanical properties. RSC Advances, 6(45) (IF 3.169). pp. 39106-39117.

Dubey, R K and Nag, P S and Gupte, P K (1968) Some observations on bainitic hardening of 18-4-1 high speed steel. NML Technical Journal, 10 (2). pp. 19-23.

Dutta, S and Rajnikanth, V and Panda, A K and Mitra, A and Chatterjee, S and Roy, R K (2019) Effect of Annealing Treatment on Mechanical and Magnetic Softening Behaviors of Cold Rolled Interstitial-Free Steel. Journal of Materials Engineering and Performance , 28(4) . pp. 2228-2236.

Ghosh, Arindam and Das, Samar and Chatterjee, S (2008) Ageing behavior of a Cu-bearing ultrahigh strength steel. Materials Science and Engineering A, 486 (1-2). pp. 152-157.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2005) Structure and properties of a low carbon Cu bearing high strength steel. Materials Science and Engineering A, 396 (1-2). pp. 320-332.

Ghosh, M and Das, Samar and Banarjee, P S and Chatterjee, S (2005) Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple. Materials Science and Engineering A, 390 (1-2). pp. 217-226.

Ghosh, Sabita and Pal, T K and Mukherjee, Surojit and Das, Goutam and Ghosh, Sukomal (2008) Comparative study of heat-affected zone with weld and base material after post-weld heat treatment of HSLA steel using ball indentation technique. Journal of Materials Science, 43 (16). pp. 5474-5482.

Ghosh, Sabita and Tarafder, Mita and Sivaprasad, S and Tarafder, S (2010) Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 617-622.

Ghosh Chowdhury, S and Das, Samar and De, P K (2005) Cold rolling behaviour and textural evolution in AISI 316L austenitic stainless steel. Acta Materialia, 53 (14). pp. 3951-3959.

Ghosh Chowdhury, S and Datta, Sudarsan and Ravi Kumar, B and De, P K and Ghosh, R N (2007) Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel. Materials Science and Engineering A, 443 (1-2). pp. 114-119.

Gorain, N and Walunj, M G and Soni, and Kumar, M and Kumar, B R (2020) Effect of continuous annealing process on various structure parameters of martensite of dual-phase steels. Archives of civil and mechanical engineering, 29(4) (IF-3.672). pp. 2305-2015.

Gupta, K N (1971) Effect of titanium, aluminium & other additions on the solidification & structure of steel ingots. NML Technical Journal, 13 (1). pp. 14-18.

Gupta, S K and Kumar, Sanjeev and Patwari, Anand Ganvir and Chatterjee, A and Ghosh, Somnath (2016) Control of sulphur and minimisation of centre line segregation for Rail Steel. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 243-250.

Haldar, A and Huang, X and Leffers, T and Hansen, N and Ray, R K (2004) Grain orientation dependence of microstructures in a warm rolled IF steel. Acta Materialia, 52 (18). pp. 5405-5418.

Hore, S and Das, S K (2019) Computer simulation of microstructure evolution in strip-cast silicon steel with cube and fibre texture. Philosophical Magazine (IF-1.855). pp. 2841-2857.

Hore, S and Das, Suchandan K and Humane, M M and Peethala, A K (2019) Neural Network Modelling to Characterize Steel Continuous Casting Process Parameters and Prediction of Casting Defects. Transactions of the Indian Institute of Metals (IF-1.176). pp. 3015-3025.

Humane, M M and Minj, R K and Peshwe, D R and Paretkar, R K (2010) Effect of two step cold rolling — continuous annealing on micro-structures, textures and mechanical properties in IF and IF-HS steel sheets. Transactions of the Indian Institute of Metals, 63 (1). pp. 21-30.

Kamaraj, A and Mandal, G K and Roy, G G (2019) Control of Slag Carryover from the BOF Vessel During Tapping: BOF Cold Model Studies. Metallurgical and Materials Transactions B , 50(1) . pp. 438-458.

Kamaraj, Ashok and Murugaiyan, Premkumar and Mandal, G K and Roy, G G (2022) The Role of Slag Carryover on the Non-metallic Inclusion Evolution and Magnetic Behavior in Electrical Steel. Metallurgical and Materials Transactions B- Process Metallurgy and Materials Processing Science, 53(4) . pp. 1989-2003.

Kar, Abhijit and Ghosh, M and Ray, Ashok K and Ray, Ajoy K (2008) Effect of interfacial thickness and residual stress on the mechanical property of the alumina–stainless steel braze joint interface. Materials Science and Engineering A, 498 (1-2). pp. 283-288.

Kar, Abhijit and Mandal, Sudipta and Venkateswarlu, K and Ray, Ajoy K (2007) Characterization of interface of Al2O3–304 stainless steel braze joint. Materials Characterization, 58 (6). pp. 555-562.

Kar, J and Guguloth, K (2021) Effect of Beam Oscillation on Creep Properties of Electron Beam Welded AISI 316L Stainless Steel. Metals and Materials International .

Khadeer, S A and Babu, P R and Kumar, B R and Kumar, A S (2020) Influence of Upset Pressure on Microstructure and Mechanical Properties of Friction-Welded AISI 4140 Low Alloy Steel Pipes. Transactions of Indian Institute of Metals, 73(2) (IF-1.205). pp. 465-478.

Khajuria, A and Akhtar, M and Bedi, R (2022) Boron addition to AISI A213/P91 steel: Preliminary investigation on microstructural evolution and microhardness at simulated heat-affected zoneZugabe von Bor zum Stahl X10CrMoVNbN9-1: Voruntersuchung zu Gefugeentwicklung und Mikroharte in simulierter Warmeeinflusszone. Materialwissenschaft und Werkstofftechnik, 53(10) . pp. 1167-1183.

Khajuria, A and Akhtar, M and Bedi, R (2021) A novel approach to envisage effects of boron in P91 steels through Gleeble weld-HAZ simulation and impression-creep. Journal of Strain Analysis for Engineering Design .

Khajuria, A and Kumar, Rajneesh and Bedi, R (2019) Effect of Boron Addition on Creep Strain during Impression Creep of P91 Steel. Journal of Materials Engineering and Performance , 28(7) . pp. 4128-4142.

Khajuria, A and Modassir, A and Bedi, R and Kumar, Rajneesh and Ghosh, M and Das, C R and Albert, S K (2020) Influence of boron on microstructure and mechanical properties of Gleeble simulated heat-affected zone in P91 steel. International Journal of Pressure Vessels and Piping, 188 (IF-2.230).

Kishore, Kaushal and Chandan, A K and Sahoo, Biraj K and Meena, L K (2022) Novel observation of dominant role of strain rate over strain during pre-straining on corrosion behaviour of 304L austenitic stainless steel. Materials Chemistry and Physics, 277 .

Konar, J and Banerjee, N G (1965) Dissolution of steel and absorption of hydrogen by steel during acid pickling in presence of inhibitor Part II. NML Technical Journal, 7 (4). pp. 4-6.

Konar, J and Banerjee, N G (1971) Form of hydrogen in steel. NML Technical Journal, 13 (3). pp. 76-79.

Krishnan, A and Dutta, S and Subramanian, K and Panda, A K and Murugaiyan, Premkumar and Roy, R K (2018) Evaluation of Microstructural and Mechanical Behaviours of Tempered 2.25Cr-1Mo Steel Through Electromagnetic Characterization. Transactions of the Indian Institute of Metals , 71(10) (IF-1.176). pp. 2395-2402.

Kumar, B Ravi and Singh, Vishal and Nanda, T and Adhikary, M and Haldar, Nimai and Venugopalan, T (2018) Effect of Tailoring Martensite Shape and Spatial Distribution on Tensile Deformation Characteristics of Dual Phase Steels. Journal of Engineering Materials and Technology, 140(2) (IF- 1.141).

Kumar, G and Kumar, Ashok and Bar, H N and Sivaprasad, S (2019) A comparative assessment of cyclic deformation behavior of SA333 Gr-6 steel at ambient and elevated temperatures. International Journals of Material Research, 110(11) . pp. 1000-1009.

Kumar, Sunil and Mandal, G K and Rajnikanth, V and Misra, S and Ghosh Chowdhury, S and Srivastava, V C (2018) Effect of cooling media on microstructure and mechanical properties of Nb/Ti containing microalloyed steel. Journal of Metallurgy and Materials Science, 60(1) . pp. 1-12.

Kumar, Sunil and Nandi, Sukalpan and Pattanayek, S K and Madan, M and Kaushik, B and Kumar, R and Krishna, K Gopala (2023) Atomistic characterization of multi nano-crystal formation process in Fe-Cr-Ni alloy during directional solidification: Perspective to the additive manufacturing. Materials Chemistry and Physics, 308 .

Kundu, Sukumar and Ghosh, M and Chatterjee, S (2006) Diffusion bonding of commercially pure titanium and 17-4 precipitation hardening stainless steel. Materials Science and Engineering A, 428 (1-2). pp. 18-23.

Madge, S V and Louzguine, D V and Kawashima, A and Greer , A L and Inoue, A (2016) Compressive plasticity of a La-based glass-crystal composite at cryogenic temperatures. Material & Design, 101 (IF- 4.364). pp. 146-151.

Mahato, M M (2018) The influence of alloying elements on properties of centrifugally cast high-speed steel rolls. Journal of Metallurgy and Materials Science, 60(1) . pp. 49-62.

Maity, S K and Rajak, A K and Chandra Shekhar, M and Singh, S D (2014) Development of 0.2C-CrMnMoV Ultra High Strength Steel. International Journal of Scientific Engineering and Technology, 3(2) . pp. 101-108.

Malathi, M and Kumar, Anil and Godiwalla, K M and Chacko, Z E and Ajmani, S K and Ranganathan, S (2014) Cold Model Study of Submerged Peripheral Gas Bubbling from a Cylindrical Dispenser. ISIJ International, 54(10) (IF-1.069). pp. 2239-2247.

Malathi, M and Kumar, Anil and Chacko, Z.E and Godiwalla, K.M and Ajmani, S K and Ranganathan, S (2013) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85 (IF-1.15). pp. 927-934.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Effect of coating on the wear properties of stir cast Al–2Mg base short steel fiber reinforced composites. Materials Science and Engineering A, 460-461 . pp. 485-493.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Mandal, G K and Ashok, K and Das, S K and Biswas, S K and Sarkar, R B and Bharathy, R S and Srivastava, V C (2018) Development of Stretch Flangeable Grade Steels by Inclusion Engineering Approach. Journal Of Materials Engineering And Performance, 27(11) (IF-1.094). pp. 5622-5634.

Mandal, G K and Dutta, M and Kumar, Tipu and Mondal, Avik and Walunj, M G and Mishra, Suman K and Pais, R and Pathak, L C (2020) Formation and growth of iron-zinc intermetallics during annealing treatment of galvanized steel. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 29-47.

Mandal, G K and Kamaraj, A and Minj, M.M. and Das, S K and Ramanan, R B V and Venugopalan, T (2019) Development of Speciality Grade Wire by Controlling the Inclusions in High-Carbon Steel Using Synthetic Slag Treatment. Transactions of the Indian Institute of Metals, 72(2) . pp. 369-381.

Mandal, G K and Kumar, Sudhir and Kumar, Tipu and Srivastava, V C (2017) Hot Deformation Behaviour of a Nb-Mo Linepipe Steel. Transaction of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1943-1951.

Metya, Avijit Kumar and Das, Anindya and Tarafder, S and Balasubramaniam, Krishnan (2019) Nonlinear Lamb wave for the evaluation of creep damage in modified 9Cr–1Mo steel. NDT & E International, 107 .

Miadad, S J and Venugopalan, T and Halder, N and Kumar, B Ravi (2020) On the Study of Batch Annealing Parameter Optimization for Higher Lankford Value in High Phosphorus Interstitial Free High Strength Steel. Journal of Materials Engineering and Performance, 29 . pp. 7598-7606.

Mishra, Suman K and Das, S and Ranganathan, S (2002) Precipitation in high strength low alloy (HSLA) steel: a TEM study. Materials Science and Engineering A, 323 (1-2). pp. 285-292.

Misra, R D K and Ravi Kumar, B and Somani, M and Karjalainen, L P (2008) Deformation processes during tensile straining of ultrafine/nanograined structures formed by reversion in metastable austenitic steels. Scripta Materialia, 59 (1). pp. 79-82.

Mitra, A and Mohapatra, J N and Swaminathan, J and Ghosh, M and Panda, A K and Ghosh, R N (2007) Magnetic evaluation of creep in modified 9Cr–1Mo steel. Scripta Materialia, 57 (9). pp. 813-816.

Modassir, A and Khajuria, A (2020) Effects of prior austenite grain size on impression creep and microstructure in simulated heat affected zones of boron modified P91 steels. Materials Chemistry and Physics , 249 (IF-3.408).

Mukherjee, J K (1971) Studies on the mechanical properties of Ni-Mn maraging steels. NML Technical Journal, 13 (3). pp. 65-68.

Mukherji, A N and Prabhakaram, P (1978) Diffusion coatings on steel. Anti-Corrosion Methods and Materials, 25 (1). pp. 5-12.

Nanda, T and Singh, V and Singh, G and Singh, M and Kumar, B R (2021) Processing routes, resulting microstructures, and strain rate dependent deformation behaviour of advanced high strength steels for automotive applications. Archives of civil and mechanical engineering, 21(1) .

Nemethy, L (1965) Rare earth metals in stainless steelmaking. NML Technical Journal, 7 (1). pp. 41-48.

Nijhawan, B R (1964) Growths pattern of iron and steel industry in India's economic development. NML Technical Journal, 6 (2). pp. 13-24.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D (2013) Development of Prefused Synthetic Flux for Basic Oxygen Steel Making through Micro-Pelletization and Sintering of Iron Oxide Fines. Steel Research International, 84(11) (IF-0.493). pp. 1115-1125.

Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Palit Sagar, S and Parida, N and Das, S and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Panda, A K and Das, Swapan K and Mitra, A and Jiles, D C and Lo, C C H (2006) Evaluation of deformation behavior of HSLA-100 steel using magnetic hysteresis technique. IEEE Transactions on Magnetics, 42 (10). pp. 3264-3266.

Panda, Ashis K and Mohapatra, J N and Murugaiyan, Premkumar and Roy, Rajat K and Mitra, Amitava (2020) Impact of Pre-formed Martensite on the Electromagnetic Properties and Martensitic Transformation Kinetics of Uniaxially Tensile Loaded 304 Stainless Steel. Journal of Materials Engineering and Performance , 29 . pp. 7141-7152.

Paswan, Dayanand and Vaish, A K and Singh, S D and Ghorai, S and Malathi, M and Prasad, S and Minj, R K (2014) Production of Alloy Cast Iron from Multi–Metallic Magnetite Ore of Nagaland. Steel World 2013, 19/11 . pp. 36-38.

Patel, N K and Walunj, M G and Kumar, B Ravi (2019) Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel. Journal of Materials Engineering and Performance, 28(3) . pp. 1391-1401.

Paul, S K and Roy, S and Sivaprasad, S and Bar, H N and Tarafder, S (2018) Identification of Post-necking Tensile Stress–Strain Behavior of Steel Sheet: An Experimental Investigation Using Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 27(11) (IF-1.094). pp. 5736-5743.

Paul, S K and Roy, S and Sivaprasad, S and Tarafder, S (2018) A Simplified Procedure to Determine Post-necking True Stress–Strain Curve from Uniaxial Tensile Test of Round Metallic Specimen Using DIC. Journal of Materials Engineering and Performance, 27(9) (IF-1.094). pp. 4893-4899.

Poddar, D and Chakraborty, A and Kumar, B Ravi (2019) Annealing twin evolution in the grain-growth stagnant austenitic stainless steel microstructure. Materials Characterization, 155 .

Rai, R K and Sahu, J K and Das, S K and Paulose, N and Fernando, D.C and Srivastava, C (2018) Cyclic plastic deformation behaviour of a directionally solidified nickel base superalloy at 850 degrees C: Damage micromechanisms. Materials Characterization, 141 (IF-3.220). pp. 120-128.

Rajinikanth, V and Kumar, Tipu and Mahato, B and Ghosh Chowdhury, S and Sangal, S (2019) Effect of Strain-Induced Precipitation on the Austenite Non-recrystallization (T-nr) Behavior of a High Niobium Microalloyed Steel. Metallurgical and Materials Transactions A, 50(12) . pp. 5816-5838.

Rajnikanth, V and Munda, Parikshit and Minj, R K and Ghosh Chowdhury, S (2012) In Quest of self Reliance: NML’s steel development program. Science and Culture, Vol.78/No.11-12 . pp. 532-536.

Rajpurohit, R S and Jena, P S M and Mahato, B and Sahu, J K (2020) Strain partitioning between matrix and precipitates during fatigue deformation of 2.25Cr-Mo steel. Material Science and Technology (IF-1.835).

Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking & Steelmaking, 45(4) (IF-1.205). pp. 325-334.

Rana, A K and Paul, S K and Dey, P P (2018) Effect of Martensite Volume Fraction on Strain Partitioning Behavior of Dual Phase Steel. Physical Mesomechanics , 21(4) (IF-1.551). pp. 333-340.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Das, Arpan (2007) Effect of large strains on grain boundary character distribution in AISI 304L austenitic stainless steel. Materials Science and Engineering A, 454-455 . pp. 239-244.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2009) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Ravi Kumar, B and Ghosh, M (2007) Surface and mid-plane texture evolution in austenite phase of cold rolled austenitic stainless steels. Materials Science and Engineering A, 457 (1-2). pp. 236-245.

Ravi Kumar, B and Madhukar, A and Srivastava, V C and Ghosh Chowdhury, S (2013) Chronology of product development at CSIR-NML. Steel Tech .

Ravi Kumar, B and Mahato, B and Bandopadhyay, N R and Bhattacharya, D K (2005) Comparison of rolling texture in low and medium stacking fault energy austenitic stainless steels. Materials Science and Engineering A, 394 (1-2). pp. 296-301.

Ravi Kumar, B and Singh, A K and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2006) Deformation-induced transformation textures in metastable austenitic stainless steel. Materials Science and Engineering A, 429 (1-2). pp. 205-211.

Ravikiran, K and Das, G and Kumar, S and Sivaprasad, K and Ghosh, M (2019) Evaluation of Microstructure at Interfaces of Welded Joint Between Low Alloy Steel and Stainless Steel. Metallurgical and Materials Transactions A (50(6)). pp. 2784-2797.

Ravikiran, K and Mehtani, H and Sivaprasad, K and Prasad , M J N (2022) Influence of nickel-based buttering material on welded joint between SA508 low alloy steel and 304LN stainless steel. International Journal of Pressure Vessels and Piping, 195 .

Ray, Ashok K and Diwakar, K and Prasad, B N and Tiwari, Y N and Ghosh, R N and Whittenberger, J D (2007) Long term creep–rupture behaviour of 813 K exposed 2.25–1Mo steel between 773 and 873 K. Materials Science and Engineering A, 454-455 . pp. 124-131.

Roy, A and Tarafder, S and Sivaprasad, S and Das, Swapan K and Manna, I and Chattoraj, I (2007) Fatigue crack growth retardation in an HSLA steel in benign environments. International Journal of Fatigue, 29 (2). pp. 254-260.

Roy, Rajat K and Dutta, Siuli and Panda, A K and Rajnikanth, V and Das, Swapan K and Mitra, A and Strangwood, M and Davis, C L (2018) Assessment of recovery and recrystallisation behaviours of cold rolled IF steel through non-destructive electromagnetic characterisation. Philosophical Magazine, 98 (1.632). pp. 1933-1944.

Roy, Rajat K and Ghosh, M and Panda, A K and Ghosh, R N and Mitra, A (2010) Development of rapidly solidified 6.5 wt% silicon steel for magnetic applications. Transactions of the Indian Institute of Metals, 63 (4). pp. 745-750.

Roy, Rajat K and Murugaiyan, Premkumar and V, Rajnikanth and Pundir, SPS and Sarkar, Subrata and Panda, Ashis K and Mitra, Amitava (2022) Magnetic Anisotropic Behaviour of CRGO Steels for Quality Assessment. Journal of Nondestructive Evaluation, 41 (2.588). p. 71.

Roy, Rajat K and Panda, A K and Das, Swapan K and Govind, and Mitra, A (2009) Development of a copper-based filler alloy for brazing stainless steels. Materials Science and Engineering A, 523 (1-2). pp. 312-315.

Sahoo, Biraj K and Deva, Anjana and Pandey, Pratiksha and Meena, L K and Ghosh Chowdhury, S and Jha, Bimal Kumar (2020) Microstructure–Property Correlation in High-Strength Formable Steel with Varying Nb-Si Content. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 1901-1908.

Sahoo, Biraj K and Walunj, M G and Srivastava, V C and Pais, R and Pathak, L C and Mandal, G K (2024) Elimination of Wettability Issues in Interstitial Free High Strength (IFHS) Steel by Controlling the Annealing Atmosphere. Transactions of The Indian Institute of Metals .

Sahoo, K L (1994) Improvement of steel shots and its service life assessment in foundry operation. Indian Foundry Journal, 40 . pp. 3-5.

Sahu, J K and Krupp, U and Christ, H J (2012) Fatigue crack initiation behavior in embrittled austenitic–ferritic stainless steel. International Journal of Fatigue, 45 . pp. 8-14.

Sahu, Puspendu and Curtze, Sven and Das, Arpan and Mahato, B and Kuokkala, Veli Tapani and Ghosh Chowdhury, S (2010) Stability of austenite and quasi-adiabatic heating during high-strain-rate deformation of twinning-induced plasticity steels. Scripta Materialia, 62 (1). pp. 5-8.

Shah, Minal and Das, S K and Ghosh Chowdhury, S (2019) Effect of Alloying Elements on Microstructure and Mechanical Properties of Air-Cooled Bainitic Steel. Metallurgical and Materials Transactions A, 50(5) . pp. 2092-2102.

Sharma, S and Mukherjee, T (1977) Structure and creep properties of commercial heats of 2¼ Cr-I Mo steel made in TISCO in comparison with international standards. NML Technical Journal, 19 (1). pp. 8-14.

Singh, G and Nanda, T and Miadad, S J and Gorain, N C and Venugopalan, T and Kumar, B R (2019) Correlation between Luders band formation and precipitation kinetics behaviour during the industrial processing of interstitial free high strength steels. Archives of Civil and Mechanical Engineering, 19(2) . pp. 469-483.

Singh, Inder (1970) Effect of inhibitors on the permeability and diffusion co-efficient of hydrogen in steel. NML Technical Journal, 12 (1). pp. 22-28.

Singh, M and Kumar, R and Shukla, D K and Arora, K S (2019) Phase transformation and impact toughness in HAZ of micro alloyed X80 line pipe steel. Materials Research Express, Volume 6, Number 2, 6(2) .

Singh, M P and Arora, K S and Gupta, A and Kumar, Rajneesh and Shukla, D K and Jhunjhunwala, K P (2022) Experimental characterization of dynamic fracture toughness behavior of X80 pipeline steel welded joints for different heat inputs. Welding in the World .

Singh, M P and Arora, K S and Shajan, N and Pandu, S R and Shome, M and Kumar, R and Shukla, D (2019) Comparative analysis of continuous cooling transformation behaviour in CGHAZ of API X-80 and X-65 line pipe steels. Journal of Thermal Analysis and Calorimetry, 137(4) . pp. 1155-1167.

Singh, N and Nanda, T and Kumar, B R and Das, S K and Singh, V (2019) In situ investigations of microstructural changes during tensile deformation of AISI 304L stainless steels. Archives of Civil and Mechanical Engineering, 19(3) . pp. 672-679.

Singh, Pundan K. and Das, Anindya and Sivaprasad, S and Biswas, P and Verma, Rahul K. and Chakrabarti, D (2017) Energy absorption behaviour of different grades of steel sheets using a strain rate dependent constitutive model. Thin-Walled Structures, 111 (IF- 2.829). pp. 9-18.

Singh, Raghuvir and Das, Goutam and Singh, P K and Chattoraj, I (2009) Low-Temperature Sensitization Behavior of Base, Heat-Affected Zone, and Weld Pool in AISI 304LN. Metallurgical and Materials Transactions A, 40 (5). pp. 1219-1234.

Singh, Raghuvir and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and De, P K and Chattoraj, I (2007) The importance of grain size relative to grain boundary character on the sensitization of metastable austenitic stainless steel. Scripta Materialia, 57 (3). pp. 185-188.

Singla, Rashmi and Tripathy, S and Das, S K (2019) An integrated phenomenological process model for prediction of oxygen pickup during open air tapping and pouring of liquid steel. Chemical Engineering Science, 203 . pp. 391-401.

Sirohi, S and Gupta, A and Pandey, C and Vidyarthy, R S and Guguloth, K and Natu, H (2022) Investigation of the microstructure and mechanical properties of the laser welded joint of P22 and P91 steel. Optics & Laser Technology, 147 .

Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2000) Effect of prestrain on fracture toughness of HSLA steels. Materials Science and Engineering A, 284 (1-2). pp. 195-201.

Srivastava, A and Kamaraj, A and Mandal, K and Mandal, G K (2021) Role of Synthetic Slag Treatment on the Morphology of Non-Metallic Inclusions and Subsequent Cold Drawability of the High Carbon Wire Rod Steel. Metals and materials international .

Swain, M and Borad, D and Patel, K and Lodhari, D and Vaish, Ashok Kumar (2018) Development of high strength micro-alloyed forged steel. Journal of Metallurgy and materials Science, 60(4) . pp. 211-220.

Tarafder, Mita and Das, S K and Chattoraj, I and Nasipuri, M and Tarafder, S (2010) Fractal-based quantification of crack paths for determination of effective microstructural length scales and fracture toughness. Scripta Materialia, 62 (2). pp. 109-112.

Thakur, A K and Kumar, R R and Bansal, G K and Verma, Rahul K. and Tarafder, S and Sivaprasad, S and Mandal, G K (2021) Processing-Microstructure-Property Correlation for Producing Stretch-Flangeable Grade Dual-Phase Steel. Journal of Materials and Performance .

Tiwary, S K and Gupte, P K (1970) Hardening of silicon spring steel. NML Technical Journal, 12 (1). pp. 1-4.

Tripathy, S and Sahu, V K and Jene, P S M and Tarafder, Soumitra and Chowdhury, S G (2022) On the importance of local equilibria in alloy design criteria for bulk nano-pearlitic steels and ensuing mechanical properties. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 841 .

Vaish, A K and Singh, S D and Minj, R K and Bandyopadhyay, D (2004) An insight into energy saving measures in an integrated steel plant. Journal of Metallurgy and materials Science, 46 (4). pp. 213-231.

Venkatrama, M and Mohanty, O N and Ghosh, R N (2001) Modelling of transformation kinetics in HSLA 100 steel during continuous cooling. Scandinavian Journal Of Metallurgy, 30 (1). pp. 8-13.

Book or NML Publication

Das, Suchandan K and Mehrotra, S P and Godiwalla, K M (2010) Technological advances in Refining and Processing of stainless Steel - A brief overview. In: Advances in Stainless Steel. Series in Metallurgy and Materials Science . University Press of India Pvt, Hyderabad, pp. 431-452. ISBN 9788173716966

Maity, S K and Kawalla, R (2011) Ultrahigh Strength Steel: Development of Mechanical Properties Through Controlled Cooling. In: Heat Transfer - Engineering Applications. InTech , Croatia, pp. 309-336. ISBN 978-953-307-361-3

Conference or Workshop Item

Bhagat , A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2004) Prediction of Solubility of Carbonitrides in High Strength Low Alloy Steel. In: Second International Conference on advance structural Steels (ICASS-2004), 2004, China.

Das, Suchandan K and Das, Rashmita (2010) A Mathematical Model To Characterize Erosion Behaviour Of Boiler Grade Steels Impacted By Fly Ash In Coal Fired Power Plants. In: MS’10 Prague Proceedings of the International Conference on Modelling and Simulation 2010, 22 – 25 June 2010, Prague, Czech Republic.

Das, Suchandan K and Kumari, Sabita (2010) A Multi-Input Multi-Output Neural Network Model To Characterize Mechanical Properties Of Strip Rolled High Strength Low Alloy (HSLA) Steel. In: MS’10 Prague Proceedings of the International Conference on Modelling and Simulation 2010, 22 – 25 June 2010, Prague, Czech Republic.

Ghosh Chowdhury, S and Munda, Parikshit and Singh, S R (2010) Development of Advanced High Strength Steels (AHSS) for Automobiles: A Review on Design Criteria. In: International Conference : Automotive Materials & Manufacturing - 2010, Oct 2010, Pune.

Narang, S K (1987) Immersion plating of tin and its alloys on steel wires. In: ATM-87, 1987, Bangalore.

Patel, R M (1966) Steel strip aluminising. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur.

Rajnikanth, V and Husain, M M and Ray, Ajoy K (2010) Difffusion bonding of non weldable high alloy steel. In: National Welding Meet , August 2010, Puducherry.

Sahu, M K and Swaminathan, J and Bandyopadhyay, N R and Sagar, S P (2018) Creep Damage Evaluation In P92 Steel Using Second Harmonic Of High Power Ultrasonic Signal. In: 7th International Conference of Materials Processing and Characterization (ICMPC), MAR 17-19, 2017, Gokaraju Rangaraju Inst Engn & Technol, Hyderabad, INDIA.

Sheethal, S and Giridharan S Sanjay, N V and Metya, Avijit Kumar and Chacko, E Z and Singh, D K and Chandra, Sanjay and Palit Sagar, S (2012) Evaluation and Optimization of Electromagnetic Stirring (EMS) Parameters for Continuously Cast High Carbon Billet Quality using Ultrasonic C-Scan Imaging. In: National Seminar on NDE 2012, December 10 -12, 2012, Ghaziabad, Delhi.

Patent

1423/KOL/2011 Dt. 4.11 .2011 (2011) An improved ultrasonic inspection system for surface and sub-surface crack detection of HSS Rolls - Application No.1423/KOL/2011 Dt. 4.11 .2011. Patent Ref.No : PAT-0386/2011/India .

Project Reports

Arora, S M and Gupte, P K and Nijhawan, B R (1957) Aluminising of Steels by the Aqueous Flux Process. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Banerjee, N G (1958) Vacuum determination of Hydrogen in Steels. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Bhatnagar, S S and Nijhawan, B R (1950) Abnormality in Steel. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Bucknall, E H (1953) Steels for Pre-stressed concrete construction. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Chatterjea, A B and Nijhawan, B R (1955) The effect of Aluminium nitride precipitation in relation to grain growth in Steels. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Chatterjea, A B and Nijhwan, B R and Contractor, G P (1950) Formation of Hairline Cracks in Steels. Other (TMP). CSIR NML Jamshedpur, Jamshedpur.

Chatterjee, A B and Nijhawan, B R (1951) The effect of Austenitic grain size on Nickel-Chromium Steels. Other (TMP). CSIR- NML ,Jamshedpur, Jamshedpur.

Contractor, G P and Paranjpe, V G (1951) Transformations in Steels Isothermal and During Continuous Cooling. Other (TMP). CSIR -NML, Jamshedpur, Jamshedpur.

CSIR-NML, Director Manufacture of sponge iron. Other (TMP). CSIR, NML. (Submitted)

Das, B N and Sani, G D (1956) Impact fatigue resistance of structural Steels. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Das, B N and Sani, G D (1961) Studies on fatigue behavior of some structural steels. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Director, NML (1963) Nickel-free Austenitic Stainless Steels. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Ghose, M K and Pait, S and Kar, B C (1961) Spectrographic analysis of high Chromium-Manganese Austenitic Stainless Steel by Porous cup techniques using Neutral filter. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Kapoor, A N and Chatterjea, A B and Nijhawan, B R (1953) Aluminising of Steel. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Kar, B C (1954) Determination of small amounts of Aluminium in steel by Spectrochemical Method. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Kaushal, D D and Chatterjea, A B and Nijhawan, B R (1955) Influence of Aluminium on the Isothermal Transformation and temperature range of Martensite formation. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Krishnan, A A and Prakash, Ved (1953) High temperature oxidation characteristics of some Manganese-Aluminium Steels. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Pramanick, A K and Ghosh, M and Das, Goutam and Das, Swapan K and Minj, R K and Ghosh Chowdhury, S (2012) Strengthening Mechanism of Nb and V Microalloyed Low C Steel Rebars and Slabs-Phase-II. Collaborative (CLP). CSIR-NML, www.nmlindia.org. (Unpublished)

Pramanick, A K and Gorai, S and Ghosh, M and Das, Goutam and Das, Swapan K (2014) Optimization of strength in V/N micro alloyed steel by varying vanadium content at fixed Nitrogen level. Collaborative (CLP). CSIR-NML, CSIR-NML, Jamshedpur. (Unpublished)

Ray, S K and Banerjee, T (1965) Electro-Deposition of 18:8 Stainless Steel. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Tandon, D S and Gupta, J R (1961) Non-metallic inclusions – Their Quantitative extraction from Steel. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Thesis

Baral, Jayashree (2011) Creep characterization of Boron added P91 steel in the temperature range 600 - 650 degree C. Masters thesis, National Metallurgical Laboratory (NML).

Das, Swapan K (2007) Fracture Behaviour of Copper Strengthened HSLA Steel. PhD thesis, Bengal Engineering and Science University.

Prasad, Prabha (2002) Effect of Monotonic and Cyclic Loading on the Fracture Behavior of SA 333 Steel. PhD thesis, Indian Institute of Technology Kharagpur.