Items where Author is "Pal, J"

Article

Ammasi, A and Pal, J and Pal, Jagannath and Ammasi, Ayyandurai (2024) Use of Additives as Internal Heat Sources in Hematite Ore Pellets- A Review. Mineral Processing and Extractive Metallurgy Review, online (4.5).

Pal, J and Ammasi, A and Bandyopadhyay, B S and Dwarapudi, Srinivas and Paul, I (2022) An innovative approach to replace bentonite in hematite ore pelletizing with organic binder. Mineral Processing and Extractive Metallurgy Review .

Ammasi, A and Pal, J (2021) Blast Furnace Flue Dust as a Potential Carbon Additive in Hematite Ore Pellet. Mineral Processing and Extractive Metallaurgy Review, Online published (IF-2.76).

Pal, J and Ghorai, S and Venugopalan, T (2020) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 129 (3–4) (IF-0.89). pp. 299-307.

Ammasi, A and Pal, J (2020) Reaction Mechanism of In-situ Carbon in Hematite Ore Pellet during Induration. Mineral Processing and Extractive Metallurgy Review (IF-2.785).

Pal, J (2019) Innovative Development on Agglomeration of Iron Ore Fines and Iron Oxide Wastes. Mineral Processing and Extractive Metallurgy Review, 40(4) (IF-1.615). pp. 248-264.

Y, Rajshekar and Pal, J and T, Venugopalan (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking and Steelmaking, 45(4) . pp. 325-334.

Rajshekar, Y and Pal, J and Venugopalan, T (2018) Development of hematite ore pellet utilizing mill scale and iron ore slime combination as additive. Journal of Mining and Metallurgy Section B: Metallurgy, 54(2) . pp. 197-208.

Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Mill scale as a potential additive to improve the quality of hematite ore pellet. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.5). pp. 202-210.

Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking & Steelmaking, 45(4) (IF-1.205). pp. 325-334.

Pal, J and Ghorai , S and Rajshekhar, Y and Koranne, V. M (2017) Development of blast furnace quality pellet optimising blue dust, hard ore and friable ore ratio. Ironmaking and Steelmaking , 44(8) (IF-0.985). pp. 568-576.

Pal, J and Ghorai, S and Ammasi, A and Hota, S K and Koranne, V M and Venugopalan, T (2017) Improving reductibility of iron ore pellets by optimization of physical parameters. Journal of Mining and Metallurgy Section B- Metallurgy, 53(1) (IF-0.804). pp. 37-46.

Pal, J (2016) Utilization of micro fines in iron and steel making process. Steel World, June . pp. 86-90.

Elzohiery, Mohamed and Mohassab, Yousef and Pal, J and Zhang, Shengqin and Sohn, Hong Yong (2016) Reduction kinetics of magnetite concentrate particles with H2 + CO at 1200 to 1600 oC relevant to a novel Ironmaking process. 7th International Symposium on High-Temperature Metallurgical Processing . pp. 35-41.

Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213.

Meraj, Md and Pramanik, Susanta and Pal, J (2016) Role of MgO and Its Different Minerals on Properties of Iron Ore Pellet. Transaction of the Indian Institute of Metals, 69(6) (IF- 0.533). pp. 1141-1153.

Ranjan, P and Pal, J (2016) Salt solution treatment to prevent the low temperature reduction degradation of haematite pellet. Ironmaking and Steelmaking , 43(9) (IF-0.985). pp. 688-696.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking, 43(2) (IF-0.985). pp. 97-111.

Pal, J and Ghorai, S and Nandi, B and Chakaborty, T and Das, Goutam and Venugopalan, T (2015) Effect of pyroxenite and olivine minerals as source of MgO in hematite pellet on improvement of metallurgical properties. Journal of Central South University, 22(9) . pp. 3302-3310.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking .

Pal, J and Ghorai, S and Das, Avimanyu (2015) Development of carbon composite iron ore micropellets by using the microfines of iron ore and carbon-bearing materials in iron making. International Journal of Minerals, Metallurgy and Materials, 22 (IF-0.69). pp. 132-140.

Pal, J and Venugopalan, T (2015) Carbon as in situ energy source in induration of hematite pellets and its effect on pellet properties. Ironmaking and Steelmaking, 42 (IF-0.553). pp. 139-147.

Pal, J and Ghorai, S and Agarwal, Sanjay and Nandi, B and Chakraborty, T and Das, Goutam and Prakash, S (2015) Effect of Blaine Fineness on the Quality of Hematite Iron Ore Pellets for Blast Furnace. Mineral Processing and Extractive Metallurgy Review, 36 (2) (IF-0.690). pp. 83-91.

Pal, J and Ghorai, S and Bandyopadhyay, D and Ghosh, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. Journal of Iron and Steel Research, International, 22 (IF-0.675). pp. 916-923.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Development of Chromite Sinter from Ultra-Fine Chromite Ore by Direct Sintering. ISIJ International, 54(3) (IF-1.069). pp. 559-566.

Mandal, D and Ghosh, M and Pal, J and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Ghosh, Sukomal (2014) Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels. Materials & Design, 54 (IF-3.171). pp. 831-837.

Pal, J and Ghorai, S and Goswami, M C and Prakash, S and Venugopalan, T (2014) Development of Pellet-Sinter Composite Agglomerate for Blast Furnace. ISIJ International, vol 54 (IF-1.069). pp. 620-627.

Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D (2013) Development of Prefused Synthetic Flux for Basic Oxygen Steel Making through Micro-Pelletization and Sintering of Iron Oxide Fines. Steel Research International, 84(11) (IF-0.493). pp. 1115-1125.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D and Ghosh, Sukomal (2013) Development of fluxed micropellets for sintering utilising iron oxide waste fines. Ironmaking & Steelmaking, 40(7) (IF-0.454). pp. 498-504.

Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.

Pal, J and Ghorai, S and Goswami, M C and Bandyopadhyay, D and Ghosh, S (2011) Agglomeration of Waste Iron-oxide for use in Steel Making. Steel Tech, 6 (1). pp. 1-6.

Pal, J and Ghorai, S and Singh, D P and Goswami, M C and Bandopadhyay, D and Ghosh, Dinabandhu (2011) Dissolution Characteristics of CO2-Treated Fluxed Pellets in Hot Metal Bath. Mineral Processing and Extractive Metallurgy Review , 32 (4). pp. 229-246.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2010) Performance Assessment of CO2 Treated Fluxed Iron Oxide Pellets in Basic Oxygen Steel Making Process. ISIJ International, 50 (1). pp. 105-114.

Nandy, Bikash and Chaudhury, Manoj Kumar and Pal, J and Bhattacharjee, D (2009) Sintering Characteristics of Indian Chrome Ore Fines. Metallurgical and Materials Transactions B, 40 (5). pp. 662-675.

Pal, J and Ghorai, S and Goswami, M C and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) Development of Fluxed iron oxide pellets strengthened by CO2 treatment for use in basic oxygen steel making. ISIJ International, 49 (2). pp. 210-219.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Pal, J and Goswami, M C and Mahato, B and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) High Temperature Characterization of CO2 Treated Fluxed Pellets Developed for Basic Oxygen Steel Making. ISIJ International, 49 (9). pp. 1325-1332.

Pal, J and Bandopadhyay, D and Singh, D P and Ghosh, Sukomal (2008) A comparative study for smelting of chromite ore, pellets, briquettes and sinter. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 117 (3). pp. 129-136.

Pal, J and Ghosh, S and Goswami, M C and Singh, D P and Kumar, Manoj and Minj, R K and Upadhyay, A K (2007) Role of direct reduced iron fines in nitrogen removal from electric arc furnace steel. Steel Research International, 78 (8). pp. 588-594.

Pal, J (2006) Thermodynamic analysis of nitrogen removal in EAF by DRI fines injection. Ironmaking & Steelmaking, 33 (6). pp. 466-470.

Pal, J and Goswami, M C and Goel, R P (2005) Some Thermodynamic and Kinetic Aspects of Nitrogen Removal in Arc Furnace Steel Melting. Indian Foundry Journal, 51 (6). pp. 33-40.

Chaudhary, P N and Pal, J and Singh, D P and Singh, M and Ghosh, Sukomal (2004) Dephosphorization of steelmaking slag. Transactions of the Indian Institute of Metals, 57 (5). A5.

Pal, J and Goswami, M C (2004) Control of silicon in hot metal. Journal of Metallurgy and materials Science, 46 (1). pp. 23-38.

Kumar, Manoj and Pal, J and Ghosh, S (2004) Performance of sponge iron charging in electric arc furnace. Journal of Metallurgy and materials Science, 46 (3). pp. 197-204.

Pal, J and Goswami, M C and Singh, Manjit and Singh, K K (2003) Desulphurisation of high sulphur coal to improve industrial utilisation. Ironmaking & Steelmaking, 30 (6). pp. 441-446.

Pal, J and Goswami, M C and Singh, D P (2003) On The Desulphurisation Of Assam Coal With Coke Oven Gas. Transactions of the Indian Institute of Metals, 56 (3). pp. 239-242.

Pal, J and Chaudhary, P N and Goswami, M C (2003) Utilisation of LD slag - An overview. Journal of Metallurgy and Materials Science, 45 (2). pp. 61-72.

Pal, J and Singh, S and Ghosh, A K and Mohan, S (2002) A mathematical model for end point control of basic oxygen steel making furnace. Journal of Metallurgy and materials Science, 44 (1). pp. 39-49.

Goswami, M C and Pal, J (2002) Role of coke quality in improving blast furnace performance. Journal of Metallurgy and materials Science., 44 (2). pp. 91-102.

Pal, J and Goswami, M C (2001) Simple mathematical models to control silicon, sulphur and manganese in hot metal during blast furnace operation. Journal of Metallurgy and materials Science, 43 (3). pp. 203-211.

Conference or Workshop Item

Ammasi , A and Pal, J (2018) Influence of addition of carbon on Pelletization of Hematite Ore Fines. In: Asia Steel International Conference 2018, 6-9 Feb., 2018, Mayfair Hotel, Bhubaneswar, India.

Ammasi , A and Pal, J (2018) Effect of Cooling Rate on Cold Compressive Strength of Carbon-Burdened Hematite Pellets. In: MINERAL PROCESSING Technology -2018, 10-12 Oct,2018, Dhanbad.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2018) Study on production of low carbon ferrochrome from chromite concentrate. In: Manganese/Chrome Ores & Ferro-Alloy Summit, 15-16th February 2018, Visakhapatnam, India .

Ammasi, A and Pal, J (2017) Influences of carbonaceous materials on the quality of hematite ore pellets. In: The 3rd International Conference on Science and Technology of Ironmaking and Steelmaking (STIS-2017), Dec 11-13,2017, IIT Kanpur.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Utilization of low grade chromite ore fines to recover chromium as charge-chrome. In: 20th National conference on Non-ferrous minerals and metals-2016, 8-9th July, 2016, Jamshedpur .

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Agglomeration of chromite ore fines through direct sintering route. In: International Conference on “Processing of Lean Grade and Urban Ores (IC-LGO 2015), 20-22nd January 2015, Jamshedpur .

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Sintering of chromite ore fines for its utilization in arc furnace for ferrochrome production. In: 13th Iron and Steel summit, 25-26th September, 2015, Raipur, India.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Effect of SiO2 on the reduction of chromite sinter for ferrochrome production. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2014, 12-15 November 2014, College of Engineering, Pune (COEP).

Agarwal, Sanjay and Ghorai, S and Pal, J and Ghosh, Dinabandhu (2013) Chromite ore fines sintering for ferrochrome production. In: 26th National convention of metallurgical and material engineers & National seminar LGO 2013 of Institution of Engineers (India), 22-23rd January, Jamshedpur.

Agarwal, Sanjay and Ghorai, S and Pal, J and Ghosh, Dinabandhu (2012) Direct sintering of chromite ore fines for ferrochrome production in submerge arc furnace. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2010) Refining of hot metal utilizing fluxed iron oxide pellets. In: NMD-ATM 2010, 14-16 Nov, 2010, IISC, Bangalore.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2009) Development of Fluxed Iron Oxide Pellets for Steel Making Utilizing Waste Materials. In: NMD-ATM 2009, November 14-17, 2009, Kolkata.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2008) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 15-16, 2008, NML, Jamshedpur.

Randhawa, N S and Jana, R K and Agarwal, Sanjay and Ghorai, S and Maity, S K and Pal, J (2007) Production of Fe-Si-Mn from leached sea nodule residue. In: Inter. Sem. on Mineral Processing Technology, 2007, 22-24 Feb, 2007, IIT Mumbai.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2006) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 14-16, 2006, NML, Jamshedpur.

Jana, R K and Randhawa, N S and Pal, J and Minj, R K and Godiwalla, K M (2005) Recovery of manganese as ferro-silico-manganese alloy from leached sea nodule residue. In: National Seminar on Polymetallic Nodule, 29-30th September 2005, Bhubaneswar.

Chaudhary, P N and Pal, J (2002) An Overview of Treatment of Steel-Making Slag for Recovery of Lime Phosphorus Values. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Patent

NA (2015) An Improved process for preparation of iron oxide pellets using sodium Lignosulphonate containing wastes and copper smelting slag replacing bentonite. NA.

Project Reports

Pal, J and Venugopalan, T and Ghorai, S and Goswami, M C and Prakash, S and Konar, J and Singh, D P (2013) Studies on pellet-sinter composite agglomeration for blast furnace ironmaking. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Ranjan, Vikas and Pal, J (2012) Effect of Mgo from different Sources on Iron Ore Pellet Properties. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Pandey, B D and Sahu, S K and Godiwalla, K M and Singh, D P and Pal, J and Agarwal, Sanjay and Maharaj, Lal (2006) Development of a Process for the Production of zinc dust. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Mandal, D and Ghosh, M and Pal, J and De, P K and Das, Goutam and Das, Swapan K and Ghosh Chowdhury, S and Lakra, B A and Ghosh, Sukomal (2006) Development of Cast Austempered Fe-Si-Mn-ME (Microalloying Elements) Steels. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Thesis

Ammasi, A and Pal, J (2014) Effect of an organic binder and copper slag on pelletization of hematite ore eliminating bentonite. Masters thesis, AcSIR, CSIR-NML , .

Md., Meraj and Pramanik, Susanta and Pal, J (2014) Effect of MgO bearing flux material of different sources in iron ore pellets. Masters thesis, CSIR-NML and NIT-Durgapur.