Items where Author is "Pal, J"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 75.

Ammasi, A and Pal, J and Pal, Jagannath and Ammasi, Ayyandurai (2024) Use of Additives as Internal Heat Sources in Hematite Ore Pellets- A Review. Mineral Processing and Extractive Metallurgy Review, online (4.5).

Pal, J and Ammasi, A and Bandyopadhyay, B S and Dwarapudi, Srinivas and Paul, I (2022) An innovative approach to replace bentonite in hematite ore pelletizing with organic binder. Mineral Processing and Extractive Metallurgy Review .

Ammasi, A and Pal, J (2021) Blast Furnace Flue Dust as a Potential Carbon Additive in Hematite Ore Pellet. Mineral Processing and Extractive Metallaurgy Review, Online published (IF-2.76).

Pal, J and Ghorai, S and Venugopalan, T (2020) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 129 (3–4) (IF-0.89). pp. 299-307.

Ammasi, A and Pal, J (2020) Reaction Mechanism of In-situ Carbon in Hematite Ore Pellet during Induration. Mineral Processing and Extractive Metallurgy Review (IF-2.785).

Pal, J (2019) Innovative Development on Agglomeration of Iron Ore Fines and Iron Oxide Wastes. Mineral Processing and Extractive Metallurgy Review, 40(4) (IF-1.615). pp. 248-264.

Y, Rajshekar and Pal, J and T, Venugopalan (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking and Steelmaking, 45(4) . pp. 325-334.

Ammasi , A and Pal, J (2018) Influence of addition of carbon on Pelletization of Hematite Ore Fines. In: Asia Steel International Conference 2018, 6-9 Feb., 2018, Mayfair Hotel, Bhubaneswar, India.

Rajshekar, Y and Pal, J and Venugopalan, T (2018) Development of hematite ore pellet utilizing mill scale and iron ore slime combination as additive. Journal of Mining and Metallurgy Section B: Metallurgy, 54(2) . pp. 197-208.

Ammasi , A and Pal, J (2018) Effect of Cooling Rate on Cold Compressive Strength of Carbon-Burdened Hematite Pellets. In: MINERAL PROCESSING Technology -2018, 10-12 Oct,2018, Dhanbad.

Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Mill scale as a potential additive to improve the quality of hematite ore pellet. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.5). pp. 202-210.

Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking & Steelmaking, 45(4) (IF-1.205). pp. 325-334.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2018) Study on production of low carbon ferrochrome from chromite concentrate. In: Manganese/Chrome Ores & Ferro-Alloy Summit, 15-16th February 2018, Visakhapatnam, India .

Ammasi, A and Pal, J (2017) Influences of carbonaceous materials on the quality of hematite ore pellets. In: The 3rd International Conference on Science and Technology of Ironmaking and Steelmaking (STIS-2017), Dec 11-13,2017, IIT Kanpur.

Pal, J and Ghorai , S and Rajshekhar, Y and Koranne, V. M (2017) Development of blast furnace quality pellet optimising blue dust, hard ore and friable ore ratio. Ironmaking and Steelmaking , 44(8) (IF-0.985). pp. 568-576.

Pal, J and Ghorai, S and Ammasi, A and Hota, S K and Koranne, V M and Venugopalan, T (2017) Improving reductibility of iron ore pellets by optimization of physical parameters. Journal of Mining and Metallurgy Section B- Metallurgy, 53(1) (IF-0.804). pp. 37-46.

Pal, J (2016) Utilization of micro fines in iron and steel making process. Steel World, June . pp. 86-90.

Elzohiery, Mohamed and Mohassab, Yousef and Pal, J and Zhang, Shengqin and Sohn, Hong Yong (2016) Reduction kinetics of magnetite concentrate particles with H2 + CO at 1200 to 1600 oC relevant to a novel Ironmaking process. 7th International Symposium on High-Temperature Metallurgical Processing . pp. 35-41.

Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213.

Meraj, Md and Pramanik, Susanta and Pal, J (2016) Role of MgO and Its Different Minerals on Properties of Iron Ore Pellet. Transaction of the Indian Institute of Metals, 69(6) (IF- 0.533). pp. 1141-1153.

Ranjan, P and Pal, J (2016) Salt solution treatment to prevent the low temperature reduction degradation of haematite pellet. Ironmaking and Steelmaking , 43(9) (IF-0.985). pp. 688-696.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking, 43(2) (IF-0.985). pp. 97-111.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Utilization of low grade chromite ore fines to recover chromium as charge-chrome. In: 20th National conference on Non-ferrous minerals and metals-2016, 8-9th July, 2016, Jamshedpur .

Pal, J and Ghorai, S and Nandi, B and Chakaborty, T and Das, Goutam and Venugopalan, T (2015) Effect of pyroxenite and olivine minerals as source of MgO in hematite pellet on improvement of metallurgical properties. Journal of Central South University, 22(9) . pp. 3302-3310.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking .

Pal, J and Ghorai, S and Das, Avimanyu (2015) Development of carbon composite iron ore micropellets by using the microfines of iron ore and carbon-bearing materials in iron making. International Journal of Minerals, Metallurgy and Materials, 22 (IF-0.69). pp. 132-140.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Agglomeration of chromite ore fines through direct sintering route. In: International Conference on “Processing of Lean Grade and Urban Ores (IC-LGO 2015), 20-22nd January 2015, Jamshedpur .

Pal, J and Venugopalan, T (2015) Carbon as in situ energy source in induration of hematite pellets and its effect on pellet properties. Ironmaking and Steelmaking, 42 (IF-0.553). pp. 139-147.

Pal, J and Ghorai, S and Agarwal, Sanjay and Nandi, B and Chakraborty, T and Das, Goutam and Prakash, S (2015) Effect of Blaine Fineness on the Quality of Hematite Iron Ore Pellets for Blast Furnace. Mineral Processing and Extractive Metallurgy Review, 36 (2) (IF-0.690). pp. 83-91.

NA (2015) An Improved process for preparation of iron oxide pellets using sodium Lignosulphonate containing wastes and copper smelting slag replacing bentonite. NA.

Pal, J and Ghorai, S and Bandyopadhyay, D and Ghosh, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. Journal of Iron and Steel Research, International, 22 (IF-0.675). pp. 916-923.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Sintering of chromite ore fines for its utilization in arc furnace for ferrochrome production. In: 13th Iron and Steel summit, 25-26th September, 2015, Raipur, India.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Effect of SiO2 on the reduction of chromite sinter for ferrochrome production. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2014, 12-15 November 2014, College of Engineering, Pune (COEP).

Ammasi, A and Pal, J (2014) Effect of an organic binder and copper slag on pelletization of hematite ore eliminating bentonite. Masters thesis, AcSIR, CSIR-NML , .

Md., Meraj and Pramanik, Susanta and Pal, J (2014) Effect of MgO bearing flux material of different sources in iron ore pellets. Masters thesis, CSIR-NML and NIT-Durgapur.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Development of Chromite Sinter from Ultra-Fine Chromite Ore by Direct Sintering. ISIJ International, 54(3) (IF-1.069). pp. 559-566.

Mandal, D and Ghosh, M and Pal, J and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Ghosh, Sukomal (2014) Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels. Materials & Design, 54 (IF-3.171). pp. 831-837.

Pal, J and Ghorai, S and Goswami, M C and Prakash, S and Venugopalan, T (2014) Development of Pellet-Sinter Composite Agglomerate for Blast Furnace. ISIJ International, vol 54 (IF-1.069). pp. 620-627.

Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D (2013) Development of Prefused Synthetic Flux for Basic Oxygen Steel Making through Micro-Pelletization and Sintering of Iron Oxide Fines. Steel Research International, 84(11) (IF-0.493). pp. 1115-1125.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D and Ghosh, Sukomal (2013) Development of fluxed micropellets for sintering utilising iron oxide waste fines. Ironmaking & Steelmaking, 40(7) (IF-0.454). pp. 498-504.

Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.

Agarwal, Sanjay and Ghorai, S and Pal, J and Ghosh, Dinabandhu (2013) Chromite ore fines sintering for ferrochrome production. In: 26th National convention of metallurgical and material engineers & National seminar LGO 2013 of Institution of Engineers (India), 22-23rd January, Jamshedpur.

Pal, J and Venugopalan, T and Ghorai, S and Goswami, M C and Prakash, S and Konar, J and Singh, D P (2013) Studies on pellet-sinter composite agglomeration for blast furnace ironmaking. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Agarwal, Sanjay and Ghorai, S and Pal, J and Ghosh, Dinabandhu (2012) Direct sintering of chromite ore fines for ferrochrome production in submerge arc furnace. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Ranjan, Vikas and Pal, J (2012) Effect of Mgo from different Sources on Iron Ore Pellet Properties. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Pal, J and Ghorai, S and Goswami, M C and Bandyopadhyay, D and Ghosh, S (2011) Agglomeration of Waste Iron-oxide for use in Steel Making. Steel Tech, 6 (1). pp. 1-6.

Pal, J and Ghorai, S and Singh, D P and Goswami, M C and Bandopadhyay, D and Ghosh, Dinabandhu (2011) Dissolution Characteristics of CO2-Treated Fluxed Pellets in Hot Metal Bath. Mineral Processing and Extractive Metallurgy Review , 32 (4). pp. 229-246.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2010) Performance Assessment of CO2 Treated Fluxed Iron Oxide Pellets in Basic Oxygen Steel Making Process. ISIJ International, 50 (1). pp. 105-114.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2010) Refining of hot metal utilizing fluxed iron oxide pellets. In: NMD-ATM 2010, 14-16 Nov, 2010, IISC, Bangalore.

Nandy, Bikash and Chaudhury, Manoj Kumar and Pal, J and Bhattacharjee, D (2009) Sintering Characteristics of Indian Chrome Ore Fines. Metallurgical and Materials Transactions B, 40 (5). pp. 662-675.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2009) Development of Fluxed Iron Oxide Pellets for Steel Making Utilizing Waste Materials. In: NMD-ATM 2009, November 14-17, 2009, Kolkata.

Pal, J and Ghorai, S and Goswami, M C and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) Development of Fluxed iron oxide pellets strengthened by CO2 treatment for use in basic oxygen steel making. ISIJ International, 49 (2). pp. 210-219.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Pal, J and Goswami, M C and Mahato, B and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) High Temperature Characterization of CO2 Treated Fluxed Pellets Developed for Basic Oxygen Steel Making. ISIJ International, 49 (9). pp. 1325-1332.

Pal, J and Bandopadhyay, D and Singh, D P and Ghosh, Sukomal (2008) A comparative study for smelting of chromite ore, pellets, briquettes and sinter. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 117 (3). pp. 129-136.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2008) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 15-16, 2008, NML, Jamshedpur.

Pal, J and Ghosh, S and Goswami, M C and Singh, D P and Kumar, Manoj and Minj, R K and Upadhyay, A K (2007) Role of direct reduced iron fines in nitrogen removal from electric arc furnace steel. Steel Research International, 78 (8). pp. 588-594.

Randhawa, N S and Jana, R K and Agarwal, Sanjay and Ghorai, S and Maity, S K and Pal, J (2007) Production of Fe-Si-Mn from leached sea nodule residue. In: Inter. Sem. on Mineral Processing Technology, 2007, 22-24 Feb, 2007, IIT Mumbai.

Pal, J (2006) Thermodynamic analysis of nitrogen removal in EAF by DRI fines injection. Ironmaking & Steelmaking, 33 (6). pp. 466-470.

Pandey, B D and Sahu, S K and Godiwalla, K M and Singh, D P and Pal, J and Agarwal, Sanjay and Maharaj, Lal (2006) Development of a Process for the Production of zinc dust. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Mandal, D and Ghosh, M and Pal, J and De, P K and Das, Goutam and Das, Swapan K and Ghosh Chowdhury, S and Lakra, B A and Ghosh, Sukomal (2006) Development of Cast Austempered Fe-Si-Mn-ME (Microalloying Elements) Steels. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2006) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 14-16, 2006, NML, Jamshedpur.

Jana, R K and Randhawa, N S and Pal, J and Minj, R K and Godiwalla, K M (2005) Recovery of manganese as ferro-silico-manganese alloy from leached sea nodule residue. In: National Seminar on Polymetallic Nodule, 29-30th September 2005, Bhubaneswar.

Pal, J and Goswami, M C and Goel, R P (2005) Some Thermodynamic and Kinetic Aspects of Nitrogen Removal in Arc Furnace Steel Melting. Indian Foundry Journal, 51 (6). pp. 33-40.

Chaudhary, P N and Pal, J and Singh, D P and Singh, M and Ghosh, Sukomal (2004) Dephosphorization of steelmaking slag. Transactions of the Indian Institute of Metals, 57 (5). A5.

Pal, J and Goswami, M C (2004) Control of silicon in hot metal. Journal of Metallurgy and materials Science, 46 (1). pp. 23-38.

Kumar, Manoj and Pal, J and Ghosh, S (2004) Performance of sponge iron charging in electric arc furnace. Journal of Metallurgy and materials Science, 46 (3). pp. 197-204.

Pal, J and Goswami, M C and Singh, Manjit and Singh, K K (2003) Desulphurisation of high sulphur coal to improve industrial utilisation. Ironmaking & Steelmaking, 30 (6). pp. 441-446.

Pal, J and Goswami, M C and Singh, D P (2003) On The Desulphurisation Of Assam Coal With Coke Oven Gas. Transactions of the Indian Institute of Metals, 56 (3). pp. 239-242.

Pal, J and Chaudhary, P N and Goswami, M C (2003) Utilisation of LD slag - An overview. Journal of Metallurgy and Materials Science, 45 (2). pp. 61-72.

Chaudhary, P N and Pal, J (2002) An Overview of Treatment of Steel-Making Slag for Recovery of Lime Phosphorus Values. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Pal, J and Singh, S and Ghosh, A K and Mohan, S (2002) A mathematical model for end point control of basic oxygen steel making furnace. Journal of Metallurgy and materials Science, 44 (1). pp. 39-49.

Goswami, M C and Pal, J (2002) Role of coke quality in improving blast furnace performance. Journal of Metallurgy and materials Science., 44 (2). pp. 91-102.

Pal, J and Goswami, M C (2001) Simple mathematical models to control silicon, sulphur and manganese in hot metal during blast furnace operation. Journal of Metallurgy and materials Science, 43 (3). pp. 203-211.

This list was generated on Thu Mar 28 12:42:50 2024 IST.