Items where Year is 1981

Annual Reports

Director, NML (1981) Annual Report 1980-1981. NML, Jamshedpur.

Article

Altekar, V A and Banerjee, S K and Ghose, B N and Bhattacharya, J (1981) Development of clad metals for various applications. NML Technical Journal, 23 (3-4). pp. 32-36.

Bahadur, Aruna (1981) Dendritic cell-size - its growing importance. Transactions of the Indian Institute of metals, 34 (3). pp. 229-233.

Bose, A K and Rao, M R K (1981) Development of alumina foam insulation refractories. NML Technical Journal, 23 (3-4). pp. 43-45.

Dey, A K and Singh, Inder and Altekar, V A (1981) Embrittlement of high carbon steel in sulphuric acid containing thio-compounds. NML Technical Journal, 23 (3-4). pp. 27-31.

Khangaonkar, P R and Satyanarayana, C (1981) Liberation analysis and release analysis. Transactions of the institution of mining and metallurgy section c-mineral processing and extractive metallurgy, 90 (Sep). C113-C114.

Mahapatra, A K S and Dhananjayan, N (1981) Electrophoretic deposition of silicon-carbide. Transactions of the Indian Institute of metals, 34 (6). pp. 495-500.

Murthy, SR and Subrahmanyam, N and Akerkar, D D (1981) Processing of bulk copper-nickel sulfide concentrates by electrothermal smelting and matte leaching. Transactions of the Indian Institute of metals, 34 (6). pp. 511-514.

Nayak, A K (1981) Thermodynamic analysis of Al-Zn alloys from calorimetric measurements. NML Technical Journal, 23 (1-2). pp. 3-10.

Pandey, L P (1981) Use of x-rays in chemical analysis. NML Technical Journal, 23 (3-4). pp. 46-47.

Prabhakaram, P and Mukherjee, A N and Guha, B K and Dey, A K (1981) Diffusion coating of saddle castings and spacers for boiler applications. Transactions of the Indian Institute of metals, 34 (6). pp. 501-506.

Prakash, Ved and Pool, M J (1981) Effect of impurities (graphite) on the high-temperature creep-properties of NIAL. Journal of Materials Science, 16 (9). pp. 2495-2500.

Prakash, Ved and Tewari, C R and Bandyopadhyay, D (1981) Kinked hysteresis loop in 36-percent Ni-Fe alloy. Indian journal of pure & applied physics, 19 (5). pp. 492-494.

Pramanik, M R and Ganesh, R and Pandey, L P (1981) Rapid Indirect Volumetric Method for Determination of Molybdenum in Ferro-molybdenum. NML Technical Journal, 23 (1 & 2). pp. 20-21.

Santokh, Singh R and Virdhi, P S (1981) Oxygen enriched hot air blast cupola iron melting. NML Technical Journal, 23 (1-2). pp. 16-19.

Shahani, M J (1981) Biohydrometallurgy in India 1980–1981 — A brief round-up. Hydrometallurgy, 7 (4). pp. 375-380.

Singh, Inder and Banerjee, M K and Nag, P S (1981) Internal hydrogen embrittlement of cold drawn steels. Transactions of The Indian Institute of Metals, 34 (6). pp. 433-439.

Sivaramakrishnan, C S (1981) Modern concepts in solidification and structure of cast iron. NML Technical Journal, 23 (1-2). pp. 11-15.

Tiwary, S K (1981) Dephosphorisation of hot metal-A review. NML Technical Journal, 23 (3-4). pp. 37-42.

Conference or Workshop Item

Altekar, V A (1981) Deoxidation and Ingot making. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Altekar, V A (1981) National Metallurgical Laboratory. In: International Symposium on Modern Developments in Steel making, February 15, 1981, NML, Jamshedpur.

Astier, Jacques (1981) Present Situation and Possible Future of Electric Arc Furnace. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Bagaria, A K and Deo, Brahma and Ghosh, A (1981) Aspects of Thermodynamics of Deoxidation of Molten Steel with Mn and A1. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Baker, R and Normanton, A S and Davies, M W (1981) Developments in Oxygen Steelmaking Processes with particular reference to the Value of Bath Stirring. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Basu, S R (1981) Design and Project Engineering. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Beech, J and Davies , G J (1981) Some Current Researches into Fundamental Aspects of Ingot Structure. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Bloodworth, D J and Harvey, R L (1981) Hot Tops for STeel Ingots - Their Developments as Influenced by Solidification Patterns. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Burgmann, Wilhelm and Pietsch, Wolfgang (1981) Modern Technologies in Steel Degassing and Ladle Metallurgy. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Carlsson, Goran (1981) Experiences of Injection for Deoxidation and Desulphurisation of Steel. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Carter, G C and Rigg, D R (1981) Basic Oxygen Steel Plant Design. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Chakrabarti, D J (1981) An Efficient process for Desulphurization of Ferrous Melts. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Champeaux, Jean-Claude and Autin, Emile (1981) Lay-out and Main Charactersitics of the Sollac LWS Steelmaking Plant (SEREMANGE-FRANCE). In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Chatterjee, Amit (1981) Rapporteur's Summary. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Chatterjee, Amit and Kapadia, Y S and Irani, J J (1981) Stratification and Mixing in Top Blown Oxygen Steelmaking Converters. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Cherrett, N and Younger, R N (1981) Raw Materials for Basic Oxygen Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Chigrai, I D (1981) Refractories in Steelmaking and Factors affecting their operation. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Dastur, M N (1981) Modern Developments in Steelmaking Design and Project Engineering. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Datar, N S and Iyengar, R K and Sridhar, P and Rao, M R V (1981) Impact of Raw Material Quality on the Performance of LD Shops. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Delehouzee, L and Dixmier, J M and Henry, J M and Heinen, N (1981) Recent Developments in Calcium Alloy Cored Wire in Steel Production. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Ericson, Clas (1981) ASEA-SKF Ladle Furnaces in Triplex Operation with Oxygen Converter and Continuous Casting. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Florchak, John V (1981) Control of Ladle Phosphorus on High Carbon Rail Steel. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Fritz, E (1981) Bottom Blown Oxygen Steelmaking and Some Recent Variations. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Ghose, S S (1981) Refractories for the Basic Oxygen process of Steelmaking in India. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Gross, Reinhod K (1981) Ladle Metallurgy of Steel for Desulphurization, better Oxide purity and Micro-alloying. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Haastert, H P (1981) Review on Ladle Metallurgy in Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Hazra, A K and Bhattacharyya, S K and Banerjee, J (1981) Production of Special Steel in the Arc Furnaces at ASP. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Iyengar, R M (1981) Rapporteur's Summary. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Jagannathan, K P (1981) Theoretical Aspects of Oxygen Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Jagannathan, K P and Gupta, S K and Sridhar, P and Sangameswaran, K R (1981) Recent Developments in the Blowing Practice at Rourkela Steel Plant. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Jahn, F (1981) Maerz Regenerative Shaft Kiln for Manufacturing Lime for Oxygen Steelmaking with Various Fuels. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Kapadia, Y S (1981) Raw Materials for basic Oxygen Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Kharia, D P (1981) A Glimpse of The Tata Iron and Steel Company Limited, Jamshedpur. In: International Symposium on Modern Developments in Steelmaking, February 15, 1981, NML, Jamshedpur.

Kosukegawa, Takashi and Imai, Takuo and Sudo, Fumio and Bada, Hajime and Morishita, Hitoshi (1981) Experience with LD and OBM/Q-BOP Converters at Kawasaki Steel Corporation. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Langenfeld, Wilhelm and Oberbach, Manfred and Seeger, Margret (1981) Refractories for Basic Oxygen Steel Converters in Germany. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Maheshwari, G D and Mukherjee, T and Irani, J J (1981) Inclusion Distribution in Ingots - A Guide to Segragation Mechanism. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Marizy, Georges (1981) Modern Techniques for Stainless Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Maschlanka, W (1981) The Use of Sponge Iron in the Electric Arc Furnace. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Maubon, A (1981) Criteria for Selecting an Oxygen Process. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Mclean, A and Sommerville, I D (1981) Significance of Reoxiation in Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Mehlan, D and Evers, G and Eggenhofer, A (1981) Quality Improvement and Production Increase by Vacuum Arc Heating. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Mehta, M F and Dave, V S (1981) Problems Arising out of Raw Materials with Oxygen Steelmaking at Bokaro. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Meyer, G and Baum, R and Heinke, R (1981) How UHP Furnaces can Contribute to the Production of Special Steels. In: Proceedings of Internaltional Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Mitra, S K and Ghosh, B N and Swaminathan, K S (1981) An Assessment of Indian Dolomite for Oxygen Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Mody, Russi (1981) Indian Steel in the Eighties. In: International Symposium on Modern Developments in Steel making, February 15, 1981, NML, Jamshedpur.

Mukherjee, T (1981) Rapporteur's Summary. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Nakanishi, K and Saito, K and Kato, Y and Nakamura, H and Suzuki, K and Emi, T (1981) Effect of Stirring Intensity on the Metallurgical Reactions in Top-and Bottom-Blowing Processes. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Nickolaev, V F (1981) Fundamentals of Some Reactions in Oxygen Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Nijhawan, B R (1981) Global Scenario of World Steel Industry Growth Particularly up to 1985. In: Proceedings of International Symposium on Modern Developments, 1981, NML, Jamshedpur.

Oberg, Karl-Erik (1981) Ladle Metallurgy using the Scandinavian Lancers System. In: Proceedings of International Symposium , 1981, NML, Jamshedpur.

Ohno, Atsumi (1981) Solidification of Steel Ingots. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Paul, E Nilles (1981) Recent Developments in Pneumatic Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Pearce, Jai and Schempp, E G (1981) Modern Developments in Engineering of Oxygen Steelmaking Shops for Bottom and Combined Blowing. In: International Symposium on Modern Developments in Steelmaking, February 16-18, 1981, NML, Jamshedpur.

Rao, B (1981) Address on the scope of the Seminar. In: Proceedings of a Seminar Organized by The Indian Ceramic Society, Jamshedpur Section with the Co-operation of National Metallurgical Laboratory, Jamshedpur, 28-29, January 1978, NML, Jamshedpur.

Rao, E C subba (1981) Refractories for Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Rao, P Krishna (1981) Rapporteur's Summary. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Ravindran, V and Ansari, M K and Das, S C (1981) Layout of Oxygen Steelmaking Shops under Indian Conditions. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Sahai, Y and Guthrie, R I L (1981) The Formation and Role of Bubbles in Steelmaking Operations. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Saxena, S K (1981) Effect of Injection of Cao-containing Powder on Inclusions and Mechanical Properties of Aluminium-Killed Steel. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Selley, A H C and Hartley, R (1981) An Oxygen Plant Installation for Modern Steelworks. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Short, S H (1981) Pouring Refractories for a quality Steelmaking shop. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Singh, Rabindra K and Jha, Ajit S and Mukherjee, G (1981) Improved Flux Practice and Its Impact on the Lining Life in Oxygen Steelmaking Vessels in India. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Singh, S and Malhotra, S L (1981) Model Studies of Basic Oxygen Steelmaking. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Sinha, K M (1981) Layout of Modern Converter Steel Plant for the Production of 1.5 Million Tonnes per year of Continuously Cast Billets. In: International Symposium on Modern Developments in Steelmaking, February 16-18, 1981, NML, Jamshedpur.

Soundararajan, S and Kale, K B (1981) Steelmaking at Mukand. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Stradtmann, J and Munchberg, W and Metzger, C (1981) The Use of Dolomite Bricks and the Effect of Slag Formation on Basic Linings in Modern Steelmaking Practice. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Stradtmann, J and Munchberg, W and Metzger, C (1981) The Use of Dolomite Bricks and the Effect of Slag Format-ion on Basic Linings in Modern Steelmaking Practice. In: International symposium on Modern Developments in Steelmaking, February 16-18, 1981, NML, Jamshedpur.

Tahtinen, Kari and Vainola, Reima (1981) Use of Ladle Injection Treatment a Mini Steel Plant. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Tarassov, V M and Jha, Ajit S and Shrotriya, R S (1981) Recent Developments in the Technology of Steelmaking in Twin Hearth Furnaces. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Tarassov, V M and Jha, S Ajit and Shrotriya, R S (1981) Recent Developments in the Technology of Steelmaking in Twin Hearth Furnaces. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Vaidyanath, L R (1981) The Indian Institute of Metals. In: The Indian Institute of Metals, February 15, 1981, NML, Jamshedpur.

Wolters, Gunter and Scholar, Horst Dieter (1981) Project Engineering of Top & Bottom Blown Oxygen Steel Melting Shops. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.

Zoglemeyp, G (1981) Pitch Bonded and Burned, Pitch Impregnated Magnesite Brick Brands for High BOF Performances. In: Proceedings of International Symposium on Modern Developments in Steelmaking, 1981, NML, Jamshedpur.