Items where Subject is "Metallurgy > Alloys and Compounds > Aluminium Alloys"

B

Bagui, S and Murugesan, A P and Poddar, Palash (2019) Creep Behavior of As-Cast Mg-10 wt.%Sn and Mg-10 wt.%Sn-3 wt.%Al-1 wt.%Zn Alloys: A Comparative Study. Journal of Materials and Performance, 28(12) . pp. 7616-7628.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Effect of Milling Time on Structural Evolution and Mechanical Properties of Garnet Reinforced EN AW6082 Composites. Metallurgical and Materials Transaction A, 46A(3) (IF-1.730). pp. 1360-1373.

C

Chaurasia, P K and Barik, B K and Das, A and Goecke, S F and De, A (2024) Probing dimensional consistency during multi-track multi-layer gas metal arc directed energy deposition of aluminium alloys. Welding in the World .

Choudhary, C and Bar, H N and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Effect of Strain Induced Melt Activation Process on the Microstructure and Mechanical Properties of Al-5Ti-1B Treated Al-7Si Alloy. Metals and Materials International .

Choudhary, C and Sahoo, K L and Roy, Himadri and Mandal, D (2021) Effect of Grain Refiner on Microstructural Feature Influence Hardness and Tensile Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

D

Dey, Swapna and Das, S K and Basumallick, A and Chattoraj, I (2010) The Effect of pitting on fatigue lives of peak-aged and overaged 7075 aluminum alloys. Metallurgical and Materials Transactions A , 41A . pp. 3297-3307.

Dey, Swapna and Gunjan, M K and Chattoraj, I (2008) Effect of temper on the distribution of pits in AA7075 alloys. Corrosion Science, 50 (10). pp. 2895-2901.

Dutta, A and Sivaji, T and Ghosh, M and Fernandes, R and De, PS and Nayak, D and Sharma, R (2022) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry and Physics, 276 .

G

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of copper and iron on the wear properties of spray formed Al–28Si alloy. Materials & Design, 51 (IF-2.913). pp. 383-390.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of Cu and Mg on the wear properties of spray formed Al -22Si alloy. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of secondary processing on the microstructure and wear behavior of spray formed Al–30Mg 2 Si–2Cu alloy. Materials & Design, 47 (IF-2.913). pp. 489-496.

Gupta, S K and Pandey, K N and Kumar, R (2018) Experimental modelling and genetic algorithm-based optimisation of friction stir welding process parameters for joining of dissimilar AA5083-O and AA6063-T6 aluminium alloys. International Journal of Materials & Product Technology, 56(3) (IF-0.802). pp. 253-270.

J

Jindal, Vikas and Srivastava, V C and Ghosh, R N (2008) Development of IF steel–Al multilayer composite by repetitive roll bonding and annealing process. Materials Science and Technology, 24 (7). pp. 798-802.

K

Krishnan, A A and Prakash, Ved and Contractor, G P (1953) Study of the system Iron-Manganese-Aluminium and its alloys. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

M

Mandal, D and Murmu, Laxmi and Choudhury, C and Singh, Gaurav and Sahoo, K L (2019) Influence of alloying elements and grain refiner on microstructure, mechanical and wear properties of Mg-Al-Zn alloys. Canadian Metallurgical Quarterly, 58(2) . pp. 241-251.

N

Narang, S K and Reddy, K Gopal (1977) Sealing anodized aluminium: recent development. Journal of Electrochemical Society of India, 26 (4). pp. 35-41.

P

Pramanick, A K (2000) Effect of composition on the streaking and diffuse intensity in decagonal phase in Al70−XCo15CuXCY Ni15−Y system. Materials Science and Engineering, 294-296 . pp. 173-177.

Pramanick, A K (2001) Special Diffraction Effects in Al7o_xCo15Cux+yNi15_y Decagonal Alloys. Ferroelectrics, 250 . pp. 273-279.

Prashanth, K G and Shahabi, H S and Attar, H and Srivastava, V C and Eckert, J and Scudino, S and Uhlenwinkel, V and Ellendt, N (2015) Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting. Additive Manufacturing, 6 . pp. 1-5.

R

Rajnikanth, V and Jindal, Vikas and Akkimardi, V G and Ghosh, M and Venkateswarlu, K (2007) Transmission electron microscopy studies on the effect of strain on Al and Al–1% Sc alloy. Scripta Materialia, 57 (5). pp. 425-428.

Rajnikanth, V and Ray, Ajoy K and Das, Goutam and Ghosh, M and Das, Swapan K and De, P K (2008) Strain Hardening behavior of Al-Sc alloys. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Raju, K and Goudar, D M and Srivastava, V C and Rudrakshi, G B (2013) Wear behavior of secondary processed spray formed Al-28Si-5Cu-4Mg alloy. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Reddy, G J and Srivastava, V C and Rudrakshi, G B (2013) Wear Behavior Of Spray Formed Al–20 Mg 2 Si Alloy. International Journal of Engineering Research & Technology, 2(2) . pp. 1-9.

Roy, Rajat K (2014) Recrystallization Behavior of Commercial Purity Aluminium Alloys. In: Light Metals Alloys Applications. InTech Europe Janeza Trdine 9 51000 Rijeka, Croatia, Croatia.

Roy, Rajat K and Das, Siddhartha (2006) New combination of polishing and etching technique for revealing grain structure of an annealed aluminum (AA1235) alloy. New combination of polishing and etching technique for revealing grain structure of an annealed aluminum (AA1235) alloy, 41 . pp. 289-292.

Roy, Rajat K and Kar, Sujoy and Das, Karabi and Das, Siddhartha (2005) Microstructures and tensile properties of commercial purity aluminium alloy AA1235 under different annealing conditions. Materials Letters, 59 . pp. 2418-2422.

Roy, Rajat K and Kar, Sujoy and Das, Karabi and Das, Siddhartha (2006) A study of precipitation and recrystallization behaviour of aluminium alloy AA1235. A study of precipitation and recrystallization behaviour of aluminium alloy AA1235, 41 . pp. 1039-1045.

Roy, Rajat K and Kar, Sujoy and Das, Siddhartha (2009) Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011 alloy. Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011 alloy, 468 . pp. 122-129.

Rudrakshi, G B and Goudar, D M and Srivastava, V C (2013) A Comparative Study on Microstructure and Tensile Properties of Spray Formed and Ascast Al-28Si-5Cu-4Fe and Al-28Si-5Cu-4Mg Alloys. In: World Congress on Engineering 2013, July 3-5, 2013, London, UK.

Rudrakshi, G B and Srivastava, V C and Pathak, J P and Ojha, S N (2004) Spray forming of Al–Si–Pb alloys and their wear characteristics. Materials Science and Engineering A, 383 . pp. 30-38.

S

Saha, S and Ghosh, M and Pramanick, A K and Mondal, C and Maity, J (2021) Attainment of high specific hardness and specific modulus in spark plasma sintered aluminium-copper-silicon carbide-titanium carbide hybrid compositeHohe spezifische Harte und spezifisches Schubmodul von einem sparkplasmagesinterten Aluminium-Kupfer-Siliziumkarbid-Titankarbid-Verbundwerkstoff. Materialwissenschaft und Werkstofftechnik, 52(9) . pp. 965-981.

Sahoo, K L and Sahu, Rina (2013) Glass transition and crystallization of Al–Ni–La based metallic glasses studied by temperature modulated DSC. Journal of Non-Crystalline Solids, 365 (IF-1.597). pp. 33-36.

Sharma, T L and Trehan, Y N and Narang, S K (1983) Permanent black finishes on aluminium. Journal of the Electrochemical Society of India, 32 (2). pp. 266-272.

Singh, Ranapratap and Pawar, Puneet (2016) Optimization and crashworthiness investigation of empty and aluminium foam filled square tubes. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 231-241.

Srivastava, V C and Bolfarini, C (2017) Spray forming of novel materials. In: Metal Sprays and Spray Deposition. Springer, pp. 521-561. ISBN ISBN 978-3-319-52687-4

Srivastava, V C and Ellendt, N and Meyer, C and Uhlenwinkel, V (2013) Synthesis of bulk amorphous and nano-crystalline materials by spray forming. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Srivastava, V C and Mandal, R K and Ojha, S N (2001) Microstructure and mechanical properties of Al–Si alloys produced by spray forming process. Materials Science and Engineering, 304-306 . pp. 555-558.

Srivastava, V C and Ojha, S N (2004) Microstructure and wear characteristics of spray formed and hot extruded Al–Si alloys. Materials Science and Technology, 20 . pp. 1632-1638.

Srivastava, V C and Rudrakshi, G B and Uhlenwinkel, V and Ojha, S N (2009) Wear characteristics of spray formed Al-alloys and their composites. Journal of Materials Science (9). pp. 2288-2299.

Srivastava, V C and Saarivirta, E H and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2014) Bulk synthesis by spray forming of Al–Cu–Fe and Al–Cu–Fe–Sn alloys containing a quasicrystalline phase. Journal of Alloys and Compounds, 597 (IF-2.407). pp. 258-268.

Srivastava, V C and Saarivirta, E.H. and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2013) Development of bulk quasicrystalline materials by spray forming. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Srivastava, V C and Scheider, A and Uhlenwinkel, V and Bauckhage, K (2005) Spray processing of 2014-Al + SiCP composites and their property evaluation. Materials Science and Engineering A, 412 (1-2). pp. 19-26.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Eckert, J and Rosenauer, A and Zoch, H -W (2010) Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming. Materials Science and Engineering A, 527 (10-11). pp. 2747-2758.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Rosenauer, A and Zoch, H -W (2009) Novel microstructural characteristics and properties of spray formed Al-RE-TM based alloys. In: International conference on Spray forming, 2009, September 7-9, 2009, Bremen, Germany.

Srivastava, V C and surreddi, K B and Uhlenwinkel, V and Schulz, A and Eckert, J and Zoch, H -W (2009) Formation of Nanocrystalline Matrix Composite during Spray Forming of Al83La5Y5Ni5Co2. Metallurgical and Materials Transactions A, 40 (2). pp. 450-461.

W

Wollgarten, M and Sahoo, K L and Haug, J and Banhart, J (2007) Influence of La on the crystallisation behaviour of amorphous Al94−xNi6Lax (x=4 –7) alloys. Materials Science and Engineering A, 449-451 . pp. 1049-1051.

Y

Yadav, P N S and Yadav, S S (1997) Role of water in the polarisation behaviour of some aluminium alloys in methylamine. NML Technical Journal, 39 (1). pp. 23-29.