Items where Division is "Metal Extraction and Forming" and Year is 2017

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | G | J | K | M | N | P | R | S | T
Number of items: 43.


Abhilash, and Meshram, Pratima and Sarkar, Supriyo and Venugopalan, T (2017) Exploring Blast Furnace Slag As A Secondary Resource For Extraction Of Rare Earth Elements. Minerals & Metallurgical Processing Journal, 34(4) (IF-0.692). pp. 178-182.

Adeleke, A A and Kanna, M Barath and Kolawole, J Odusote and Malathi, M and Ajani, O Lasode and Paswan, Dayanand (2017) Influence of binder composition on briquetting of coal slacks. In: Influence of binder composition on briquetting of coal slacks, Dec 2017, IIT Kanpur.

Agarwal, Sanjay and Kim, Hong-In and Park, Kyung-Ho and Lee, Jin-Young (2017) Monazite Mineral Processing. In: Mineral Processing Methods, Applications and Technology, Geology and Mineralogy Research Development. Nova Science Publishers, Inc. New York, USA, NEW YORK, USA, pp. 39-56. ISBN 978-1-53612-893-2 (eBook)

Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2017) c. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151.

Ammasi, A and Pal, J (2017) Influences of carbonaceous materials on the quality of hematite ore pellets. In: The 3rd International Conference on Science and Technology of Ironmaking and Steelmaking (STIS-2017), Dec 11-13,2017, IIT Kanpur.

Ashiq, Md and Pushkar, Dhekne and Hamada, Atef Saad and Sahu, Puspendu and Mahato, B and Minz, R K and Ghosh Chowdhury, S and Karjalainen, L P (2017) Correlation of Microstructure and Texture in a Two-Phase High-Mn Twinning-Induced Plasticity Steel During Cold Rolling. Metallurgical and Materials Transactions A, 48(10) (I F-1.874). pp. 4842-4856.

Ashok, K and Sankar, P and Maruthupandian, K (2017) Process evaluation of AOD stainless steel making in Salem Steel Plant, SAIL. Journal of Metallurgy and Materials Science, 59(4) . pp. 173-180.


Bandyopadhyay, D and Sau, D C (2017) Low temperature reduction of iron oxide fines. In: Proceedings of 3rd International Conference on Science and Technology of Ironmaking and Steelmaking’ , 11-13th December , 2017, IIT, Kanpur.


Chidambaram, S and Kamaraj, A (2017) Failure investigation of an industrial crank shaft pin. Advances in Natural and Applied Sciences . pp. 1-7.

Choudhary, B N and Vaish, A K and Roy, B N (2017) Innovation for the production of value added products from sponge iron fines (waste) by simulation of rotary kiln-submerged arc furnace route. Journal of Metallurgy and Materials Science, 59(3) . pp. 127-131.


Das, Sanjeev and Prasad, Ranjit and Singh, R P and Abhilash, (2017) Physical, Mechanical and Metallurgical Characteristics of Banded Hematite Jasper of Ghatkuri (Gua), Jharkhand. Journal of Geological Society of India, 90(5) (IF-0.479). pp. 623-627.


Gaurav, G and Murtaza, Q and Yuvraj, N and Mandal, D and Sahoo, K L and Murmu, L (2017) Synthesis and effect of Misch metal on mechanical properties of conventional cast Mg-Al-Zn-Sn-Pb alloy system. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231(7) (IF-1.625).

Ghorai, S and Mandal, G K and Roy, S and Minj, R K and Agarwal, Anup and Singh, D P and Kumar, A and Ramna, R B V (2017) Treatment of LF slag to prevent powdering during cooling. Journal of Mining and Metallurgy Section B- Metallurgy , 53(2)B (IF-0.804). pp. 123-130.


Joseph, O O and Sivaprasad, S and Fayomi, O S I (2017) Comparative study on the effect of NaNO2 in corrosion inhibition of micro-alloyed and API-5L X65 steels in E20 simulated FGE. Energy Procedia, 119 . pp. 953-960.


Keekan, Kishore and Jalondharaa, J Chhaganbhai and Abhilash, (2017) Extraction of Ce and Th from Monazite Using REE Tolerant Aspergillus niger. Mineral Processing and Extractive Metallurgy Review, 38(5) (IF-1.219). pp. 312-320.

Kisku, Nicky and Sau, D C (2017) Recovery of Tungsten and Copper from Waste Tungsten Copper Borings. Journal of Materials & Metallurgical Engineering, 7(1) (Non-SCI). pp. 1-8.

Kumar, Krishna (2017) Scope Of Distillation in Extraction,Purification & Recycling of Strategic Metals- a review. International conference on Non-ferrous Minerals & Metals - 2017 . pp. 65-72.

Kumar, Sunil (2017) Effect of applied force and atomic organization of copper on its adhesion to a graphene substrate. RSC Advances, 7(40) (IF-3.108). pp. 25118-25131.

Kumar, Sunil and Das, Suchandan K (2017) A triaxial tensile deformation-induced nanoporous structure of aluminium: estimation of surface area, solid volume, and dimensionless aspect ratio. Physical chemistry chemical physics, 19(31) (IF-4.123). pp. 21024-21032.

Kumari, Anjan (2017) Recovery and recycling of metals from waste PCBs using pyrolysis followed by hydrometallurgical processes and characterization. PhD thesis, National Institute of Technology (NIT), Jamshedpur, India.

Kumari, Anjan and Jha, Manis K and Singh, R P and Ranganathan, S (2017) Investigation of the influence of inert and oxidizing atmospheres on the efficiency of decomposition of waste printed circuit boards (WPCBs). Heat and Mass Transfer, 53(4) (IF-1.233). pp. 1247-1255.


Mandal, G K and Kumar, Sudhir and Kumar, Tipu and Srivastava, V C (2017) Hot Deformation Behaviour of a Nb-Mo Linepipe Steel. Transaction of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1943-1951.

Meshram, Pratima and Bhagat, Lalit and Prakash, U and Pandey, B D and Abhilash, (2017) Organic acid leaching of base metals from copper granulated slag and evaluation of mechanism. Canadian Metallurgical Quarterly , 56(2) (IF -0.596). pp. 168-178.

Meshram, Pratima and Somani, M and Pandey, B D and Mankhand, T R and Deveci, Haci and Abhilash, (2017) Two stage leaching process for selective metal extraction from spent nickel metal hydride batteries. Journal of Cleaner Production, 157 (IF -5.715). pp. 322-332.

Mishra, V and Singh, K.N. (2017) Microstructural relation of macerals with mineral matter in coals from Ib valley and Umaria, Son-Mahanadi basin, India. International Journal of Coal Science & Technology, 4(2) (IF-). pp. 191-197.


Nath, S K and Kumar, Sanjay (2017) Reaction kinetics, microstructure and strength behavior of alkali activated silico-manganese (SiMn) slag - Fly ash blends. Construction and Building Materials, 147 (IF-3.169). pp. 371-379.

Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2017) Kinetics study of geopolymerization of fly ash using isothermal conduction calorimetry. Journal of Thermal Analysis and Calorimetry, 127(3) (IF-1.953). pp. 1953-1961.


Pal, J and Ghorai , S and Rajshekhar, Y and Koranne, V. M (2017) Development of blast furnace quality pellet optimising blue dust, hard ore and friable ore ratio. Ironmaking and Steelmaking , 44(8) (IF-0.985). pp. 568-576.

Panda, Rekha and Kumari, Archana and Jha, Manis K and Pathak, D D (2017) Recuperation of gold from waste printed circuit boards of small electronic devices. Journal of Metallurgy and Materials Science, 59 (4). 181-187.

Paswan, Dayanand and Venugopalan, T and Malathi, M (2017) Process feasibility for reduction of ilmenite pellets with non coking coal and separation of TiO from iron. Journal of Metallurgy and Materials Science, 59(4) . pp. 163-171.

Poddar, Palash and Bagui, Sumanta and Ashok, K and Murugesan, A P (2017) Experimental investigation on microstructure and mechanical properties of gravity-die-cast magnesium alloys. Journal of Alloys and Compounds, 695 (IF-3.133). pp. 895-908.

Poddar, Palash and Gupta, Savita and Sahoo, K L (2017) Magnesium-tin based composites processed through stir casting. Journal of Metallurgy and Materials Science, 59(4) . pp. 153-161.

Pramanick, A K and Das, Goutam and Das, Swapan K and Ghosh, M (2017) Failure investigation of super heater tubes of coal fired power plant. Case Studies in Engineering Failure Analysis, 9 . pp. 17-26.


Randhawa, N S and Prasad, Sanjay and Kumar, Manoj (2017) Role of flux on the upgradation of llmenite by reduction roasting process. Indian Institute of mineral Engineers .

Rao, M Ananda and Babu, S R and Kumar, M V Pavan (2017) Failure investigation of a cooling coil tube in zinc roaster furnace. Engineering Failure Analysis, 77 (IF-1.676). pp. 118-123.


Sahoo, K L and Poddar, Palash (2017) Studies on Magnesium Alloys–Properties and Potential for Automotive and Aerospace Applications. Transaction of 65th Indian foundry Congress 2017 . pp. 151-156.

Sahu, L and Dey, Shobhana (2017) Enrichment of carbon recovery of high ash coal fines using air fluidized vibratory deck separator. International Journal of Coal Science & Technology, 4(3) . 262-273.

Sameer, Kumar D and Suman, K N S and Poddar, Palash (2017) Effect of particle morphology of Ni on the mechanical behavior of AZ91E-Ni coated nano Al2O3 composites. Materials Research Express, 4(6) (IF-1.068).

Shekhar, Saurabh and Mishra, D and Agrawal, A and Sahu, K K (2017) Physico-chemical treatment of glauconitic sandstone to recover potash and magnetite. Journal of Cleaner Production, 147 (IF-5.715). pp. 681-693.

Singh, Pundan K. and Das, Anindya and Sivaprasad, S and Biswas, P and Verma, Rahul K. and Chakrabarti, D (2017) Energy absorption behaviour of different grades of steel sheets using a strain rate dependent constitutive model. Thin-Walled Structures, 111 (IF- 2.829). pp. 9-18.

Singh, Raghuvir and Das, Goutam and Mahato, B and Singh, P K (2017) Aging Degradation of Austenitic Stainless Steel Weld Probed by Electrochemical Method and Impact Toughness Evaluation. Metallurgical and materials transactions a-physical metallurgy and materials science, 48A(3) (IF-1.874). pp. 1064-1077.

Sinha, Manish K and Pramanik, Swati and Kumari, Aarti and Sahu, S K and Prasad, L B and Jha, Manis K and Yoo, Kyoungkeun and Pandey, B D (2017) Recovery of value added products of Sm and Co from waste SmCo magnet by hydrometallurgical route. Separation and purification technology, 179 (IF-3.359). pp. 1-12.


Thanseer, P M and Metya, A K and Palit Sagar, S (2017) Development of a Non-collinear Nonlinear Ultrasonic-Based Technique for the Assessment of Crack Tip Deformation. Journals of Materials Engineering and Performance, 26(6) (IF-1.331). pp. 2632-2639.

This list was generated on Mon Aug 15 23:58:10 2022 IST.