Items where Division is "Metal Extraction and Forming" and Year is 2017
Number of items: 43.
ArticleAbhilash, and Meshram, Pratima and Sarkar, Supriyo and Venugopalan, T (2017) Exploring Blast Furnace Slag As A Secondary Resource For Extraction Of Rare Earth Elements. Minerals & Metallurgical Processing Journal, 34(4) (IF-0.692). pp. 178-182. Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2017) c. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151. Ashiq, Md and Pushkar, Dhekne and Hamada, Atef Saad and Sahu, Puspendu and Mahato, B and Minz, R K and Ghosh Chowdhury, S and Karjalainen, L P (2017) Correlation of Microstructure and Texture in a Two-Phase High-Mn Twinning-Induced Plasticity Steel During Cold Rolling. Metallurgical and Materials Transactions A, 48(10) (I F-1.874). pp. 4842-4856. Ashok, K and Sankar, P and Maruthupandian, K (2017) Process evaluation of AOD stainless steel making in Salem Steel Plant, SAIL. Journal of Metallurgy and Materials Science, 59(4) . pp. 173-180. Chidambaram, S and Kamaraj, A (2017) Failure investigation of an industrial crank shaft pin. Advances in Natural and Applied Sciences . pp. 1-7. Choudhary, B N and Vaish, A K and Roy, B N (2017) Innovation for the production of value added products from sponge iron fines (waste) by simulation of rotary kiln-submerged arc furnace route. Journal of Metallurgy and Materials Science, 59(3) . pp. 127-131. Das, Sanjeev and Prasad, Ranjit and Singh, R P and Abhilash, (2017) Physical, Mechanical and Metallurgical Characteristics of Banded Hematite Jasper of Ghatkuri (Gua), Jharkhand. Journal of Geological Society of India, 90(5) (IF-0.479). pp. 623-627. Gaurav, G and Murtaza, Q and Yuvraj, N and Mandal, D and Sahoo, K L and Murmu, L (2017) Synthesis and effect of Misch metal on mechanical properties of conventional cast Mg-Al-Zn-Sn-Pb alloy system. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231(7) (IF-1.625). Ghorai, S and Mandal, G K and Roy, S and Minj, R K and Agarwal, Anup and Singh, D P and Kumar, A and Ramna, R B V (2017) Treatment of LF slag to prevent powdering during cooling. Journal of Mining and Metallurgy Section B- Metallurgy , 53(2)B (IF-0.804). pp. 123-130. Joseph, O O and Sivaprasad, S and Fayomi, O S I (2017) Comparative study on the effect of NaNO2 in corrosion inhibition of micro-alloyed and API-5L X65 steels in E20 simulated FGE. Energy Procedia, 119 . pp. 953-960. Keekan, Kishore and Jalondharaa, J Chhaganbhai and Abhilash, (2017) Extraction of Ce and Th from Monazite Using REE Tolerant Aspergillus niger. Mineral Processing and Extractive Metallurgy Review, 38(5) (IF-1.219). pp. 312-320. Kisku, Nicky and Sau, D C (2017) Recovery of Tungsten and Copper from Waste Tungsten Copper Borings. Journal of Materials & Metallurgical Engineering, 7(1) (Non-SCI). pp. 1-8. Kumar, Krishna (2017) Scope Of Distillation in Extraction,Purification & Recycling of Strategic Metals- a review. International conference on Non-ferrous Minerals & Metals - 2017 . pp. 65-72. Kumar, Sunil (2017) Effect of applied force and atomic organization of copper on its adhesion to a graphene substrate. RSC Advances, 7(40) (IF-3.108). pp. 25118-25131. Kumar, Sunil and Das, Suchandan K (2017) A triaxial tensile deformation-induced nanoporous structure of aluminium: estimation of surface area, solid volume, and dimensionless aspect ratio. Physical chemistry chemical physics, 19(31) (IF-4.123). pp. 21024-21032. Kumari, Anjan and Jha, Manis K and Singh, R P and Ranganathan, S (2017) Investigation of the influence of inert and oxidizing atmospheres on the efficiency of decomposition of waste printed circuit boards (WPCBs). Heat and Mass Transfer, 53(4) (IF-1.233). pp. 1247-1255. Mandal, G K and Kumar, Sudhir and Kumar, Tipu and Srivastava, V C (2017) Hot Deformation Behaviour of a Nb-Mo Linepipe Steel. Transaction of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1943-1951. Meshram, Pratima and Bhagat, Lalit and Prakash, U and Pandey, B D and Abhilash, (2017) Organic acid leaching of base metals from copper granulated slag and evaluation of mechanism. Canadian Metallurgical Quarterly , 56(2) (IF -0.596). pp. 168-178. Meshram, Pratima and Somani, M and Pandey, B D and Mankhand, T R and Deveci, Haci and Abhilash, (2017) Two stage leaching process for selective metal extraction from spent nickel metal hydride batteries. Journal of Cleaner Production, 157 (IF -5.715). pp. 322-332. Mishra, V and Singh, K.N. (2017) Microstructural relation of macerals with mineral matter in coals from Ib valley and Umaria, Son-Mahanadi basin, India. International Journal of Coal Science & Technology, 4(2) (IF-). pp. 191-197. Nath, S K and Kumar, Sanjay (2017) Reaction kinetics, microstructure and strength behavior of alkali activated silico-manganese (SiMn) slag - Fly ash blends. Construction and Building Materials, 147 (IF-3.169). pp. 371-379. Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2017) Kinetics study of geopolymerization of fly ash using isothermal conduction calorimetry. Journal of Thermal Analysis and Calorimetry, 127(3) (IF-1.953). pp. 1953-1961. Pal, J and Ghorai , S and Rajshekhar, Y and Koranne, V. M (2017) Development of blast furnace quality pellet optimising blue dust, hard ore and friable ore ratio. Ironmaking and Steelmaking , 44(8) (IF-0.985). pp. 568-576. Panda, Rekha and Kumari, Archana and Jha, Manis K and Pathak, D D (2017) Recuperation of gold from waste printed circuit boards of small electronic devices. Journal of Metallurgy and Materials Science, 59 (4). 181-187. Paswan, Dayanand and Venugopalan, T and Malathi, M (2017) Process feasibility for reduction of ilmenite pellets with non coking coal and separation of TiO from iron. Journal of Metallurgy and Materials Science, 59(4) . pp. 163-171. Poddar, Palash and Bagui, Sumanta and Ashok, K and Murugesan, A P (2017) Experimental investigation on microstructure and mechanical properties of gravity-die-cast magnesium alloys. Journal of Alloys and Compounds, 695 (IF-3.133). pp. 895-908. Poddar, Palash and Gupta, Savita and Sahoo, K L (2017) Magnesium-tin based composites processed through stir casting. Journal of Metallurgy and Materials Science, 59(4) . pp. 153-161. Pramanick, A K and Das, Goutam and Das, Swapan K and Ghosh, M (2017) Failure investigation of super heater tubes of coal fired power plant. Case Studies in Engineering Failure Analysis, 9 . pp. 17-26. Randhawa, N S and Prasad, Sanjay and Kumar, Manoj (2017) Role of flux on the upgradation of llmenite by reduction roasting process. Indian Institute of mineral Engineers . Rao, M Ananda and Babu, S R and Kumar, M V Pavan (2017) Failure investigation of a cooling coil tube in zinc roaster furnace. Engineering Failure Analysis, 77 (IF-1.676). pp. 118-123. Sahoo, K L and Poddar, Palash (2017) Studies on Magnesium Alloys–Properties and Potential for Automotive and Aerospace Applications. Transaction of 65th Indian foundry Congress 2017 . pp. 151-156. Sahu, L and Dey, Shobhana (2017) Enrichment of carbon recovery of high ash coal fines using air fluidized vibratory deck separator. International Journal of Coal Science & Technology, 4(3) . 262-273. Sameer, Kumar D and Suman, K N S and Poddar, Palash (2017) Effect of particle morphology of Ni on the mechanical behavior of AZ91E-Ni coated nano Al2O3 composites. Materials Research Express, 4(6) (IF-1.068). Shekhar, Saurabh and Mishra, D and Agrawal, A and Sahu, K K (2017) Physico-chemical treatment of glauconitic sandstone to recover potash and magnetite. Journal of Cleaner Production, 147 (IF-5.715). pp. 681-693. Singh, Pundan K. and Das, Anindya and Sivaprasad, S and Biswas, P and Verma, Rahul K. and Chakrabarti, D (2017) Energy absorption behaviour of different grades of steel sheets using a strain rate dependent constitutive model. Thin-Walled Structures, 111 (IF- 2.829). pp. 9-18. Singh, Raghuvir and Das, Goutam and Mahato, B and Singh, P K (2017) Aging Degradation of Austenitic Stainless Steel Weld Probed by Electrochemical Method and Impact Toughness Evaluation. Metallurgical and materials transactions a-physical metallurgy and materials science, 48A(3) (IF-1.874). pp. 1064-1077. Sinha, Manish K and Pramanik, Swati and Kumari, Aarti and Sahu, S K and Prasad, L B and Jha, Manis K and Yoo, Kyoungkeun and Pandey, B D (2017) Recovery of value added products of Sm and Co from waste SmCo magnet by hydrometallurgical route. Separation and purification technology, 179 (IF-3.359). pp. 1-12. Thanseer, P M and Metya, A K and Palit Sagar, S (2017) Development of a Non-collinear Nonlinear Ultrasonic-Based Technique for the Assessment of Crack Tip Deformation. Journals of Materials Engineering and Performance, 26(6) (IF-1.331). pp. 2632-2639. Book or NML PublicationAgarwal, Sanjay and Kim, Hong-In and Park, Kyung-Ho and Lee, Jin-Young (2017) Monazite Mineral Processing. In: Mineral Processing Methods, Applications and Technology, Geology and Mineralogy Research Development. Nova Science Publishers, Inc. New York, USA, NEW YORK, USA, pp. 39-56. ISBN 978-1-53612-893-2 (eBook) Conference or Workshop ItemAdeleke, A A and Kanna, M Barath and Kolawole, J Odusote and Malathi, M and Ajani, O Lasode and Paswan, Dayanand (2017) Influence of binder composition on briquetting of coal slacks. In: Influence of binder composition on briquetting of coal slacks, Dec 2017, IIT Kanpur. Ammasi, A and Pal, J (2017) Influences of carbonaceous materials on the quality of hematite ore pellets. In: The 3rd International Conference on Science and Technology of Ironmaking and Steelmaking (STIS-2017), Dec 11-13,2017, IIT Kanpur. Bandyopadhyay, D and Sau, D C (2017) Low temperature reduction of iron oxide fines. In: Proceedings of 3rd International Conference on Science and Technology of Ironmaking and Steelmaking’ , 11-13th December , 2017, IIT, Kanpur. ThesisKumari, Anjan (2017) Recovery and recycling of metals from waste PCBs using pyrolysis followed by hydrometallurgical processes and characterization. PhD thesis, National Institute of Technology (NIT), Jamshedpur, India. |