Items where Year is 2020

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 165.

Annual Reports

Director, NML (2020) Annual Report 2019-2020. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Article

Adeleke, A A and Odusote, J K and Ikubanni, P P and Lasode, O A and Malathi, M and Paswan, Dayanand (2020) Essential basics on biomass torrefaction, densification and utilization. International Journal of Energy Research, 45(2) (IF-3.741). pp. 1375-1395.

Akhtar, M and Khajuria, A (2020) Effects of prior austenite grain size on impression creep and microstructure in simulated heat affected zones of boron modified P91 steels. Materials Chemistry and Physics, 249 (IF-3.408). p. 122847.

Alex, T C and Kailath, A J and Kumar, Rakesh (2020) Al-Monohydrate (Boehmite) to Al-Trihydrate(Bayerite/Gibbsite) Transformation During High-Energy Milling. Metallurgical and Materials Transactions B, 51 (IF-1.874). pp. 443-451.

Ali, Rashid and Akhtar, Muhammad Umair and Zahoor, Aqib and Ali, Fahad and Scudino, Sergio and Shahid, Rub Nawaz and Tariq, Naeem ul Haq and Srivastava, V C and Uhlenwinkel, V and Hasan, B A and Eckert, J (2020) Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals. Materials Chemistry and Physics, 251 (IF-3.408). p. 123071.

Ammasi, A (2020) Effect of Heating Rate on Decomposition Temperature of Goethite Ore. Transactions of The Indian Institute of Metals, 73(1) (IF-1.205). pp. 93-98.

Ammasi, A and Pal, J (2020) Reaction Mechanism of In-situ Carbon in Hematite Ore Pellet during Induration. Mineral Processing and Extractive Metallurgy Review (IF-2.785).

Anantapadmanabahn, S S and Mishra, G and Parida, S (2020) A brief review on the development of self-healing, hydrophobic and antifouling epoxy coating. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 1-11.

Aruna, S T and Latha, S and Lakshmi, R V (2020) Multifunctional properties of electrodeposited nickel composite coating containing nanosized monoclinic zirconia particles. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 63-74.

Balani, K (2020) An opinion on hydroxyapatite based bio-composites as bone-scaffolds. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 13-19.

Bansal, G K and Chandan, A K and Mandal, G K and Srivastava, V C (2020) High Entropy Alloys: An Overview on Current Developments" in the book "High Entropy Alloys: Innovations, Advances, and Applications. High Entropy Alloys: Innovations, Advances, and Applications (Book). pp. 1-68.

Bansal, G K and Jena, P S M and Ghosh, C and Srivastava, V C and Rajnikanth, V and Dutta, Monojit and Ghosh Chowdhury, S (2020) Quench Temperature-Dependent Mechanical Properties During Nonisothermal Partitioning. Metallurgical and Materials Transactions A, 51A (IF-2.050). pp. 5088-5100.

Bansal, G K and Junior, L P and Ghosh, C and Rajnikanth, V and Tripathy, S and Srivastava, V C and Bhagat, A N and Chowdhury, S G (2020) Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials, 51(7) (IF-2.050). pp. 3410-3224.

Bansal, G K and Rajnikanth, V and Ghosh, Chiradeep and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2020) Effect of cooling rate on the evolution of microstructure and mechanical properties of nonisothermally partitioned steels. Materials Science and Engineering: A, 788 (IF-4.652). p. 139614.

Bansal, G K and Sahoo, Biraj and Chandan, A K (2020) Metallurgical Perspective on Quench and Partitioned Advanced High Strength Steels. Steel Tech, 14(4) (NonSCI). pp. 60-64.

Barat, Kaustav and Sivaprasad, S and Kar, Sujoy Kumar and Tarafder, S (2020) A novel rate based methodology for creep fatigue life estimation of superalloys. International Journal of Pressure Vessels and Piping, 182 (IF-2.230). p. 104064.

Bisht, K S and Sah, K (2020) Spectroscopic changes in conventional magnetorheological fluid and graphene oxide based magnetorheological fluid with combustion method. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 89-93.

Chakladar, S and Banerjee, Riya and Mohanty, Ashok and Chakravarty, S and Patar, Prasanjeet (2020) Turpentine oil: a novel and natural bridging liquid for agglomeration of coal fines of high ash coals. International Journal of Coal Preparation and Utilization, online (IF-2.034).

Chakladar, S and Chakravarty, S and Mohanty, Ashok and Alex, T C and Kumar, Sanjay (2020) Quality improvement of heat altered coals: A preliminary feasibility study. Environmental Technology & Innovation, 18 (IF-2.800). p. 100764.

Chakravarty, K and Mishra, V and Chakravarty, S and Chakladar, S and Saxena, V K and Bhattacharya, S (2020) Mineralogical Study of Beneficiated and Carbonized Indian Coking Coal for Better Utilization: A Case Study. Natural Resources Research, 29 . pp. 2431-2450.

Chakravarty, Koushik and Kumar, Sunil (2020) Increase in energy efficiency of a steel billet reheating furnace by heat balance study and process improvement. Energy Reports, 6 (IF-3.83). pp. 343-349.

Chakravarty, S and Chakravarty, K and Mishra, V and Chakladar, S and Mohanty, Ashok and Sharma, Mamta (2020) Characterization of Chemical Structure with Relative Density of Three Different Ranks of Coal from India. Natural Resources Research, 29(5) (IF-3.708). pp. 3121-3136.

Chalavadi, G and Singh, R K (2020) Study of Dry Mineral Separation Behavior in Dry Density Separators. Transactions of the Indian Institute of Metals, 73(8) (IF-1.205). pp. 2125-2128.

Chandan, A K and Tripathy, S and Ghosh, M and Chowdhury, S G (2020) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature (vol 50, pg 128, 2019). Metallurgical and Materials Transactions A-physical metallurgy and materials science, 51(3) (IF-2.050). p. 1438.

Char, M and Chakrabarty, A K and Metya, A K and Kar, Abhijit (2020) Retardation Effect of Tin Multilayer on Sn-3.0Ag-0.5Cu (SAC305)-Based Solder Joint Interface. Journal of Material Engineering and Performance, 29(4) (IF-1.652). pp. 2305-2315.

Chaudhary, C and Sahoo, K L and Mandal, D (2020) Processing and characterisation of modified strain-induced melt activation processed Al-Si alloys. Materials Science and Technology, 36(2) (IF-5.040). pp. 181-193.

Chennakesavulu, K and Sreedevi, P and Raju, G B and Reddy, G R (2020) Study on interaction of p-sulfonato calix[6]arene with arsanilic acid. Journal of dispersion science and technology, Online .

Das, A and Mohapatra, M and Basu, S (2020) Electrochemical application of shape and phase dependant copper sulphide for costeffective next generation supercapacitive energy storage: A review. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 95-102.

Das, Bhaskar and Hossain, S M and Pakhira, B and Pramanick, A K and Das, Rahul and Ray, M (2020) Fluorescence quenching based detection of p-nitrophenol using luminescent silicon nanocrystals and insights into the quenching mechanism. Semiconductor Science and Technology, 35(3) (IF-2.361). 035003 .

Das, T K and Dutta, Chandan and Kumar, Alok and Kadu , Satish and Palit Sagar, S (2020) Real-Time Parametric Evaluation ofWeld in Metallic Wires: A 3-D Simulation and Experimental Validation. Journal of Nondestructive Evaluation, 39(2) (IF-1.950). p. 35.

Dey, Rima and Tarafder, Soumitra and Bar, H and Sivaprasad, S (2020) Correlating Effect of Temperature on Cyclic Plastic Deformation Behavior with Substructural Developments for Austenitic Stainless Steel. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 480-496.

Dey, Shobhana and Chaurasia, Binish and Sahu, Laxikanta (2020) Dry processing of high ash Indian coal by air fluidized vibrating deck. International Journal of Coal Preparation and Utilization, online (IF-2.034). pp. 1-8.

Dey, Shobhana and Sahu, L and Chaurasia, Binish and Nayak, B (2020) Prospects of utilization of waste dumped low-grade limestone for iron making: A case study. International Journal of Mining Science and Technology, 30(3) (IF-3.903). pp. 367-372.

Dutta, Siuli and Panda, A K and Mitra, Amitava and Chatterjee, S and Roy, Rajat K (2020) Microstructural evolution, recovery and recrystallization kinetics of isothermally annealed ultra low carbon steel. Materials Research Express, 7(1) (IF-1.449). 016554.

Dutta, Siuli and Panda, Ashis K and Chatterjee, Subrata and Roy, Rajat K (2020) Effect of annealing treatment on magnetic texture of cold rolled ULC steel. Materials Letters, 276 (IF-3.204). p. 128211.

Firoz, R and Basantia, S K and Khutia, N and Bar, H N and Sivaprasad, S and Murthy, G V S (2020) Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650 degrees C. Journal of Alloys and Compounds, 845 (IF-4.650). p. 156276.

Ghosh, S and Mondal, P and Rathina, B and Chatterjee, K (2020) Effect of dual crosslinking on physico-chemical properties of hydrogels prepared from chitosan and alginate. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 31-40.

Gorain, N and Walunj, M G and Soni, and Kumar, M and Kumar, B R (2020) Effect of continuous annealing process on various structure parameters of martensite of dual-phase steels. Archives of civil and mechanical engineering, 29(4) (IF-3.672). pp. 2305-2015.

Guguloth, K and Ghosh, M and Swaminathan, J and Mitra, R (2020) Tensile creep and rupture behavior along with evolution of microstructure in a Zr-2.5Nb alloy. Materials Science and Engineering A, 791 . p. 139681.

Gupta, Siddhi and Webster, T J and Sinha, Arvind (2020) Correction to: Evolution of PVA gels prepared without crosslinking agents as a cell adhesive surface. Gupta S, Webster TJ, Sinha A. J Mater Sci Mater Med. 2020 Jul 21;31(8):63. doi: 10.1007/s10856-020-06399-1. PMID: 32696134. Journal of Materials Science - Materials in Medicine, 31(8) (IF-2.489). p. 63.

Hasan, Sk Md and Ghosh, M and Chakrabarti, D and Singh, S B (2020) Development of continuously cooled low-carbon, low-alloy, high strength carbide-free bainitic rail steels. Materials Science & Engineering A, 771 (IF-4.081). p. 138590.

Hung, Nguyen Trong and Le, Ba Thuan and Tran, Chi Thanh and Watanabe, Masayuki and Hoang, Nhuan and Do, Van Khoai and Nguyen, Thanh Thuy and Nguyen, Van Tung and Aoyagi, Noboru and Doan, Thi Thu Tra and Nguyen, Trung Minh and Jha, Manis K and Lee, Jin-Young and Jyothi, Rajesh Kumar (2020) Optimization of sulfuric acid leaching of a Vietnamese rare earth concentrate. Hydrometallurgy, 191 . p. 105195.

Hung, Nguyen Trong and Thuan, Le Ba and Thanh, Tran Chi and Watanabe, Masayuki and Khoai, Do Van and Thuy, Nguyen Thanh and Nhuan, Hoang and Minh, Pham Quang and Mai, Tran Hoang and Tung , Nguyen Van and Tra, Doan Thi Thu and Jha, Manis K and Lee, Jin-Young and Kumar, J Rajesh (2020) Separation of thorium and uranium from xenotime leach solutions by solvent extraction using primary and tertiary amines. Hydrometallurgy, 198 (IF-3.338). 105506 .

Hussain, Raja Rizwan and Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Singh, D D N (2020) Corrosion characteristics of vanadium micro-alloyed steel reinforcement bars exposed in concrete environments and industrially polluted atmosphere. Cement and Concrete Composites, 113(4) .

Jha, Gaurav and Soren, S and Mehta, K D (2020) Life cycle assessment of sintering process for carbon footprint and cost reduction: A comparative study for coke and biomass-derived sintering process. Journal of Cleaner Production, 259 (IF-7.246). pp. 120899-1.

Jha, Gaurav and Soren, S and Mehta, K D (2020) Partial substitution of coke breeze with biomass and charcoal in metallurgical sintering. Fuel, 278 (IF-5.578). p. 118350.

Kailath, A J and Sinha, Arvind (2020) Mg-based biodegradable alloys for orthopedic implants - A review. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 59-70.

Kaithwas, C K and Bhuyan, P and Pradhan, S K and Mandal, S (2020) Hall-Petch’ type of relationship between the extent of intergranular corrosion and grain size in a Ni-based superalloy. Corrosion Science, 175 .

Kakoti, A and Das, S (2020) Metallic gold thin film micropattern on polydimethylsiloxane film for flexible electronic sensors and circuits. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 49-55.

Kamaraj, A and Dash, A and Murugaiyan, Premkumar and Misra, S (2020) Investigation on Mold Flux Melting and Consumption During Continuous Casting of Liquid Steel. Metallurgical and Materials Transactions B, Online (IF-2.035).

Kamaraj, A and Haldar, Nimai and Murugaiyan, Premkumar and Misra, S (2020) High-Temperature Simulation of Continuous Casting Mould Phenomena. Transactions of the Indian Institute of Metals, 73(8) (IF-1.205). pp. 2025-2031.

Katiyar, P K and Randhawa, N S (2020) A comprehensive review on recycling methods for cemented tungsten carbide scraps highlighting the electrochemical techniques. International Journal of Refractory Metals and Hard Materials, 90 (IF-2.794). p. 105251.

Khadeer, S A and Babu, P R and Kumar, B R and Kumar, A S (2020) Influence of Upset Pressure on Microstructure and Mechanical Properties of Friction-Welded AISI 4140 Low Alloy Steel Pipes. Transactions of Indian Institute of Metals, 73(2) (IF-1.205). pp. 465-478.

Khadeer, S A and Babu, P R and Kumar, B Ravi and Kumar, A Seshu (2020) Evaluation of friction welded dissimilar pipe joints between AISI 4140 and ASTM A 106 Grade B steels used in deep exploration drilling. Journal of Manufacturing Processes, 56 (Part A) (IF-4.086). pp. 197-205.

Khajuria, A and Modassir, A and Bedi, R and Kumar, Rajneesh and Ghosh, M and Das, C R (2020) Microstructural investigations on simulated intercritical heat-affected zone of boron modified P91-steel. Materials Science and Technology, 36(13) (IF-1.835).

Khajuria, A and Modassir, A and Bedi, R and Kumar, Rajneesh and Ghosh, M and Das, C R and Albert, S K (2020) Influence of boron on microstructure and mechanical properties of Gleeble simulated heat-affected zone in P91 steel. International Journal of Pressure Vessels and Piping, 188 (IF-2.230).

Kumar, Amarjeet and Murugaiyan, Premkumar and Panda, A K and Roy, Rajat K (2020) Effect of compositional elements and processing routes on structural and thermal response in Fe-based metallic glasses. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153279.

Kumar, D Sameer and Suman, K N S and Poddar, Palash (2020) Performance evaluation of surface modified nano Al2O3 (p) reinforced AZ91E composites under impact and fatigue loading conditions. Strojnícky časopis – Journal of Mechanical Engineering, 70(1) .

Kumar, D Sameer and Suman, K N S and Poddar, Palash (2020) A study on the impact and fatigue failure of AZ91E–Ni coated alumina composites. Canadian Metallurgical Quarterly, 59(3) . pp. 316-323.

Kumar, Dhanranjan and Kumari, Munchun and Murugaiyan, Premkumar and Das, T K and Roy, Rajat K and Mitra, A and Shuvaeva, E and Churyukanov, M and Kaloshkin, S and Panda, A K (2020) Impact of uniaxial stress on soft-magnetic and magneto-impedance properties of vitrified magnetostrictive microwires. Journal of Alloys and Compounds, 831 (IF-4.175). p. 154861.

Kumar, Krishna and Das, Suchandan K and Kumar, Manoj (2020) Heat transfer modelling of dropwise condensation behaviour of magnesium vapours in the electrothermal production of magnesium. Canadian Metallurgical Quarterly, 59(2) (IF-1.456). pp. 134-150.

Kumar, Naresh and Venugopal, R and Soren, S and Chakravarty, S (2020) Thermodynamic Modelling of Effect of Flux on the Liquidus Temperatures and Phase transitions in Coal Ash. Journal of the Geological Society of India, 96(1) (IF-0.899). pp. 87-90.

Kumar, Sujeet and Djobo, J N Y and Kumar, Anil and Kumar, Sanjay (2020) Size fractionation of brown fly ash: utilisation of grey fraction as a pozzolanic material in blended cement. European Journal of Environmental and Civil Engineering , 24(6) . pp. 833-848.

Kumar, Sunil (2020) Structural Evolution of Iron–Copper (Fe–Cu) Bimetallic Janus Nanoparticles during Solidification: An Atomistic Investigation. The Journal of Physical Chemistry C, 124 (IF-4.309). pp. 1053-1063.

Kumar, Sunil and Mishra, T (2020) Shock wave induced exfoliation of molybdenum disulfide (MoS2) in various solvents: All-atom molecular dynamics simulation. Journal of Molecular Liquids, 314 (5.065). p. 113671.

Kumar, Sunil and Mishra, T and Mahata, Avik (2020) Manipulation of mechanical properties of monolayer molybdenum disulfide: Kirigami and hetero-structure based approach. Materials Chemistry and Physics, 252 (IF-3.408). p. 123280.

Kumari, A and Tripathy, A K and Ramaswamy, V (2020) Performance characterization and misplacement studies of liquid–solid fluidized bed density separator for coal beneficiation using Taguchi-ANOVA method. Particulate Science & Technology .

Kumari, Archana and Jha, Manis K and Pathak, D D (2020) An innovative environmental process for the treatment of scrap Nd-Fe-B magnets. Journal of Environmental Management, 273 (IF-5.647). p. 111063.

Kumari, Archana and Singh, Sunidhi and Parmar, Kavita and Pathak, D D and Jha, Manis K (2020) Treatment of monazite processed effluent to recover rare earth metals (REMs). Journal of Industrial and Engineering Chemistry, 83 (IF-5.278). pp. 421-429.

Kumari, Beena and Madhukar, Anuradha and Chattoraj, Indranil (2020) E-Profiling R&D Involvement/Earnings of Researchers: A G2E Tool for Performance Management at CSIR-NML. International Journal of Productivity and Performance Management (previously Work Study), Online .

Kundu, B and Balla, V K and Muraleedharan, K (2020) Technology glimpse of bioceramic implants developed by CSIR-CGCRI, Kolkata. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 49-57.

Majee, B P and Mishra, A K (2020) Recent advances in photodetection applications of two dimensional MoS2 nanostructures. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 103-126.

Malathi, M and Adekunle, Adeleke and Odusote, J K and Ikubannia, P P and Lasode, O A and Paswan, Dayanand (2020) The Ignitability, Fuel ratio and Ash Fusion Temperatures of Torrefied Woody Biomass. Heliyon, 6/3 (IF-1.65). e03582.

Mandal, G K and Dutta, M and Kumar, Tipu and Mondal, Avik and Walunj, M G and Mishra, Suman K and Pais, R and Pathak, L C (2020) Formation and growth of iron-zinc intermetallics during annealing treatment of galvanized steel. Journal of Metallurgy and Materials Science, 66(1-2) . pp. 29-47.

Manoj, A and Rao, M Ananda and Basha, M M and Basha, S M and Sankar, M R (2020) State of art on wire feed additive manufacturing of Ti-6Al-4V alloy. Materials Today - Proceeding, 26(Part 2 ) (SNIP-0.576). pp. 2608-2615.

Meshram, Pratima and Abhilash, (2020) Recovery and Recycling of Cerium from Primary and Secondary Resources- a Critical Review. Mineral processing and extractive metallurgy review, 41(4) (IF-1.615). pp. 279-310.

Meshram, Pratima and Abhilash, and Sahu, Rina (2020) Environmental impact of spent lithium-ion batteries and green recycling perspectives by organic acids - A review. Chemosphere, 242 (IF-5.778).

Meshram, Pratima and Prakash, Uday and Bhagat, Lalit and Abhilash, and Zhao, Hongbo and van Hullebusch, Eric D (2020) Processing of Waste Copper Converter Slag Using Organic Acids for Extraction of Copper, Nickel, and Cobalt. Minerals, 10(3) (IF-2.380). p. 290.

Miadad, S J and Venugopalan, T and Halder, N and Kumar, B Ravi (2020) On the Study of Batch Annealing Parameter Optimization for Higher Lankford Value in High Phosphorus Interstitial Free High Strength Steel. Journal of Materials Engineering and Performance, 29 . pp. 7598-7606.

Mishra, Prerna and Rajpurohit, R S and Srinivas , N C S and Sastry, G V S and Singh, Vakil (2020) Ratcheting Fatigue Behavior of Modified 9Cr-1Mo Steel at Room Temperature. Metals and Materials International, Online (IF-1.990).

Mishra, Suman K (2020) Toughening of nanocomposite hard coatings. Reviews on advanced materials science , 59(1) (IF-1.197). pp. 553-585.

Mishra, T (2020) Prospective of titania based photocatalyst for environmental reduction reactions. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 135-146.

Modassir, A and Khajuria, A (2020) Effects of prior austenite grain size on impression creep and microstructure in simulated heat affected zones of boron modified P91 steels. Materials Chemistry and Physics , 249 (IF-3.408).

Modassir, A and Khajuria, A and Bedi, R (2020) Effect of Re-normalizing and Re-tempering on Inter-critical Heat Affected Zone(S) of P91B Steel. Manufacturing Engineering . pp. 255-270.

Modassir, A and Khajuria, A and Pandey, M K and Ahmed, I (2020) Effects of boron modifications on phase nucleation and dissolution temperatures and mechanical properties in 9%Cr steels: sensitivity and stability. Materials Research Express, 6(12) (IF-1.783).

Mohanty, B and Jena, B K and Kandasamy, M and Dalai, N and Sahu, Ranjan K and Kadam, R M and Chakraborty, B and Jena, B (2020) The role of Se vacancies and Fe doping of nickel selenide in the water oxidation reaction. Sustainable Energy and Fuels, 4(6) (IF-5.503). pp. 3058-3065.

Mohanty, Sunati and Das, Suchandan K and Majumder, A K (2020) Artificial neural network modeling and experimental investigation to characterize the dewatering performance of a hydrocyclone. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Online 29th Oct, 2019 .

Mohta, Keshav and Gupta, Suneel K and Soupramanien, C and Swaminathan, J and Chattopadhyay, J (2020) High temperature deformation behavior of Indian PHWR Calandria material SS 304L. Nuclear Engineering and Design, 368 (IF-1.620).

Munda, Parikshit and Hussain, M M and Singh, C V and Bagui, S (2020) Failure Analysis of a Steam Superheater Tube of a Vacuum Distillation Unit (VDU) in a Petrochemical Industry. Journal of Failure Analysis and Prevention, 20 (IF-0.800). pp. 1896-1906.

Murugaiyan, Premkumar and Bedanta, Subhankar and Jena, S K and Panda, A K and Mitra, A and Bysakh, S and Roy, Rajat K (2020) Crystallization and magnetic hardening behaviour of Fe-rich FeSiBNb(Cu) melt-spun alloys. Journal of Magnetism and Magnetic Materials, 502 (IF-2.683). p. 166528.

Murugaiyan, Premkumar and Mitra, Amitava and Roy, Rajat K and Bijalwan, P K and Dutta, Monojit and Banerjee, Atanu and Panda, A K (2020) Glass forming ability and soft-magnetic properties of Fe-based glassy alloys developed using high phosphorous pig Iron. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153255.

Na, Hyunjin and Yoo, Kyoungkeun and Jha, Manis K and Tabelin, Carlito Baltazar (2020) The Separation of Aluminum and Stainless‐Steel  Scraps Using Vibrating Mixed‐Size Ball Bed . Metals, 10 (IF-2.117). 868-1-868-10.

Nath, S K (2020) Fly ash and zinc slag blended geopolymer: Immobilization of hazardous materials and development of paving blocks. Journal of Hazardous Materials, 387 (IF-9.038). p. 121673.

Nath, S K and Kumar, Sanjay (2020) Role of particle fineness on engineering properties and microstructure of fly ash derived geopolymer. Construction and Building Materials, 233 (IF-4.046). p. 117294.

Ogundele, Damilola and Ogundiran, Mary B and Babayemi, Joshua O and Jha, Manis K (2020) Material and Substance Flow Analysis of Used Lead Acid Batteries in Nigeria: Implications for Recovery and Environmental Quality. Journal of Health and Pollution, 10(27) (IF-0.37). pp. 1-12.

Pal, Anindya and Metya, Avijit Kumar and Chowdhury, R A and Sinha, A (2020) Structural and Mechanical Behavior of Mechanochemically Synthesized Nanocrystalline Hydroxyapatite from Mercenaria Clam Shells. Transactions of the Indian Ceramic Society, 29(11) . pp. 175-181.

Pal, J and Ghorai, S and Venugopalan, T (2020) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 129 (3–4) (IF-0.89). pp. 299-307.

Panda, Ashis K and Mohapatra, J N and Murugaiyan, Premkumar and Roy, Rajat K and Mitra, Amitava (2020) Impact of Pre-formed Martensite on the Electromagnetic Properties and Martensitic Transformation Kinetics of Uniaxially Tensile Loaded 304 Stainless Steel. Journal of Materials Engineering and Performance , 29 . pp. 7141-7152.

Panda, Ashis K and Roy, Rajat K and Murugaiyan, Premkumar and Das, S and Das, T K and Mitra, A (2020) Rapidly quenched magnetic materials for functional and sensor applications. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 81-88.

Panda, Rekha and Dinkar, Om Shankar and Jha, Manis K and Pathak, D D (2020) Hydrometallurgical processing of waste multilayer ceramic capacitors (MLCCs) to recover silver and palladium. Hydrometallurgy, 197 (IF-3.338 ). p. 105476.

Panda, Rekha and Dinkar, Om Shankar and Jha, Manis K and Pathak, D D (2020) Novel approach for selective recovery of gold, copper, and iron as marketable product from industrial effluent. Gold Bulletin, 53 (IF-2.279). pp. 11-18.

Panda, Rekha and Dinkar, Om Shankar and Jha, Manis K and Pathak, D D (2020) Recycling of gold from waste electronic components of devices. Korean journal of Chemical Engineering, 37(1) (IF-2.476). pp. 111-119.

Panda, Rekha and Jha, Manis K and Pathak, D D and Gupta, Rajesh (2020) Recovery of Ag, Cu, Ni and Fe from the nitrate leach liquor of waste ICs. Minerals Engineering, 158 (IF-3.795). 106584.

Pari, Sriram and Jha, Niki S and Ganesan, Thamarai Selvi and Jha, S K (2020) Pulse Electrodeposited Au–WO3 Catalyst from a Water–Ionic Liquid Microemulsion for Photoaccelerated Methanol Electrooxidation. The Journal of Physical Chemistry C, 124(40) (IF-4.270). pp. 21957-21967.

Paswan, S and Singh, J K and Singh, D D N (2020) Effect of lead alloying on corrosion characteristics of galvanized coatings exposed in atmosphere, simulated laboratory and a service environment. Surfaces and Interfaces, 21 . p. 100752.

Perumal, G and Chakrabarti, A and Pati, S and Singh, S and Reddy, V and Grewal, H S and Manivasagam, G and Arora, H S (2020) Limiting platelet adhesion in stainless steel bio-implants through microstructural modification. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 41-48.

Peter, Nicolas J and Duarte, Maria J and Liebscher, Christian H and Srivastava, V C and Uhlenwinkel, Volker and Jägle, Eric A and Dehm, Gerhard (2020) Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale. Journal of Alloys and Compounds, 820 . p. 153149.

Prasad, Sanjay and Kumar, Manoj (2020) Utilization of Roast-Reduced Ilmenite Leach Liquor for Ferrous Chloride Production by Hydrothermal Process. Transaction of the Indian Institute of Metals, Online (IF-1.205).

Prithiv, T S and Thirumurugan, G and Madan, M and Kamaraj, A (2020) Thermodynamic Assessment of Steelmaking Practices for the Production of Re-sulfur Steels. Transactions of the Indian Institute of Metals, 73(6) (IF-1.205). pp. 1595-1603.

Priya, Jayati and Randhawa, N S and Hait, Jhumki and Bordoloi, N and Patel, J N (2020) High purity copper recycled from smelter dust by sulfation roasting, water leaching and electrorefining. Environmental Chemistry Letters (IF-5.922). pp. 1-7.

Rai, R K and Sahu, J K and Das, S K and Paulose, N and Fernando, C (2020) Creep-fatigue deformation micromechanisms of a directionally solidified nickel-base superalloy at 850 degrees C. Fatigue & fracture of engineering materials & structures, 43(1) (IF- 2.555). pp. 51-62.

Rai, R K and Sahu, J K and Paulose, N and Fernando, C (2020) Low Cycle Fatigue Behavior of a Directionally Solidified Nickel-Based Superalloy: Mechanistic and Microstructural Aspect. Metallurgical and Materials Transactions A - Physical metallurgy and materials science, 51(6) (IF-2.050). pp. 2752-2765.

Rajpurohit, R S and Jena, P S M and Mahato, B and Sahu, J K (2020) Strain partitioning between matrix and precipitates during fatigue deformation of 2.25Cr-Mo steel. Material Science and Technology (IF-1.835).

Rajpurohit, R S and Mishra, P and Srinivas , N C S and Singh, S R and Singh, V (2020) Ratcheting Fatigue Behaviour of Zircaloy-2 at 300 degrees C. Metals and Materials International (IF-1.990).

Randhawa, N S and Katiyar, P K (2020) Potentiodynamic Polarization Behavior and Microscopic Examination of Tungsten Carbide Hard Metal Materials in Supported Ammoniacal Medium. Portugaliae Electrochimica Acta, 38(3) . pp. 185-200.

Randhawa, N S and Minj, R K (2020) An improved process for the production of low carbon ferromanganese. Transaction of Indian Institute of Metals (IF-1.205). pp. 1-7.

Rao, R G and Ghosh, M and Ganguly, R I and Bose, S C and Sahoo, K L (2020) Mechanical properties and age hardening response of Al6061 alloy based composites reinforced with fly ash. Materials Science and Engineering A, 772 (IF-4.652). p. 138823.

Rao, V V and Ravindra, V (2020) Vacuum based coatings for engineering applications. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 57-61.

Rao, V V and Ravindra, V (2020) Vacuum furnaces for metallurgical processing. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 97-101.

Saha, B and Vaidya, S S and Bhattacharjee, K and Bhagavatula, I and Prasad, V (2020) Weakly coupled metal-semiconductor plasmonic nanoparticles in solution. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 127-133.

Sahoo, Biraj K and Deva, Anjana and Pandey, Pratiksha and Meena, L K and Ghosh Chowdhury, S and Jha, Bimal Kumar (2020) Microstructure–Property Correlation in High-Strength Formable Steel with Varying Nb-Si Content. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 1901-1908.

Sahu, L and Bhattacharya, S and Dey, Shobhana (2020) The use of release analysis to show the selectivity of reagents towards differently sized feeds of the same coal. International Journal of Coal Preparation and Utilization, Online (IF-2.034).

Sahu, Ranjan K (2020) Some notable experiments of graphene. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 147-153.

Sahu, S K and Razi, M K and Beuscher, M and Chagnes, A (2020) Recovery of Metal Values from Ni-Cd Cake Waste Residue of an Iranian Zinc Plant by Hydrometallurgical Route. Metals, 10(5) . p. 655.

Saida, S and Chakravarty, S and Sahu, Rina and Das Biswas, Rupa and Chakravarty, K (2020) Laboratory-Scale Tests for the Utilization of High Ash Non-Coking coal in Coke-Making Process. Transactions of the Indian institute of metals, 73(5) (IF-1.205). pp. 1257-1263.

Sarangi, C K and Sahu, B P and Mishra, B K and Mitra, Rahul (2020) Effect of annealing on structure and properties of pulse electroplated Ni-W alloy coating. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 85-96.

Sarkar, C and Anuvrat, K and Garai, S and Sahu, Sumant Kumar and Chakraborty, J (2020) One pot method to synthesize three-dimensional porous hydroxyapatite nanocomposite for bone tissue engineering. Journal of Porous Materials, 27(1) (IF-2.183). pp. 225-235.

Sarkar, C and Sinha, Arvind (2020) Synthesis of fully interconnected multiporous hydroxyapatite block for orthopedic application. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 21-29.

Shah, Minal and Sahoo, K L and Das, Swapan K and Das, Goutam (2020) Wear Mechanism of High Chromium White Cast Iron and Its Microstructural Evolutions During the Comminution Process. Tribology Letters, 68(3) (IF-2.566).

Sharma, D and Gupta, S and Mehta, B R (2020) Techniques for investigation: Semiconductor/electrolyte interface processes in photo electrochemical cell for solar water splitting. Journal of Metallurgy and Materials Science,, 62(1-2) . pp. 75-54.

Shekhar, Saurabh and Sinha, S and Mishra, D and Agrawal, A and Sahu, K K (2020) A sustainable process for recovery of potash fertilizer from glauconite through simultaneous production of pigment grade red oxide. Sustainable Materials and Technologies, 23 (IF-4.375). e00129.

Shukla, A K and Sivakumar, B and Mishra, Suman K (2020) Corrosion Behavior of Ti-Si-B-C Nanocomposite Hard Coating with Different Si Contents on 4130 Steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 51(7) (IF-2.050). pp. 3576-3586.

Siddique, A B and Singh, V P and Pramanick, A K and Ray, M (2020) Amorphous carbon dot and chitosan based composites as fluorescent inks and luminescent films. Materials Chemistry and Physics, 249 (IF-3.408).

Singh, M P and Arora, K S and Kumar, Rajneesh and Shukla, D K and Prasad, S S (2020) Influence of heat input on microstructure and fracture toughness property in different zones of X80 pipeline steel weldments. Fatigue & Fracture of Engineering Materials & Structures, 44(1) (IF-3.031). pp. 85-100.

Singh, Ranjeet K and Kishore, R and Sahu, K K and Chalavadi, G and Singh, R (2020) Estimation of the Fluid Velocity Profile in the Stratification Zone of a Falcon Concentrator. Mining, Metallurgy & Exploration , 37(1) (IF-0.784 ). pp. 321-331.

Singh, Ranjeet K and Sahu, Kisor Kumar and Chalavadi, G and Swain, A K and Singh, Ratnakar (2020) Experimental investigation on the separation capabilities and limitation of Falcon semi-batch concentrator. Separation Science and Technology (IF-1.718).

Singh, Swarnima and Pandey, K K and Bose, S K and Keshri , A K (2020) Role of surface nanocrystallization on corrosion properties of low carbon steel during surface mechanical attrition treatment. Surface and Coatings Technology, 396 (IF-3.192). p. 125964.

Singh, Swarnima and Tiwari, S K and Singh, Raghuvir (2020) Influence of laser scanning speed on nitrided Ti6Al4V surface. Surface Engineering, 36(12): Special Issue: Laser . pp. 1285-1293.

Singh, Y P and Dasgupta, S and Nayar, S and Bhaskar, R (2020) Optimization of electrospinning process & parameters for producing defect-free chitosan/polyethylene oxide nanofibers for bone tissue engineering. Journal of biomaterials science-polymer edition, 31(6) (IF-2.158). pp. 781-803.

Singla, Rashmi and Alex, T C and Kumar, Rakesh (2020) On mechanical activation of glauconite: Physicochemical changes, alterations in cation exchange capacity and mechanisms. Powder Technology, 360 (IF-4.142). pp. 337-351.

Singla, Rashmi and Kumar, Sanjay and Alex, T C (2020) Reactivity Alteration of Granulated Blast Furnace Slag by Mechanical Activation for High Volume Usage in Portland Slag Cement. Waste and Biomass Valorization, 11 (IF-2.851). pp. 2983-2993.

Sinha, Shivendra and Choudhary, R and Mishra, D and Shekhar, Saurabh and Agrawal, A and Sahu, K K (2020) Valorisation of waste galvanizing dross: Emphasis on recovery of zinc with zero effluent strategy. Journal of Environmental Management, 256 (IF-4.865). p. 109985.

Soni, and Sharma, S K and Mishra, Suman K (2020) The effect of Si content on structural, mechanical and optical behaviour of magnetron sputtered Al–Si–N nanocomposite thin films. Journal of Alloys and Compounds, 831 (IF-4.175). p. 154686.

Soni, and Shekh, M J and Sharma, S K and Mishra, Suman K (2020) Strain rate sensitivity behaviour of the thin films of Al, Al-Si and nanocomposite Al-Si-N: A comparative study. Materials Characterization, 169 (IF-3.562).

Srivastava, A K and Patel, N K and Ravi Kumar, B and Sharma, A and Ahn, Byungmin (2020) Strength-Ductility Trade-Off in Dual-Phase Steel Tailored via Controlled Phase Transformation. Journal of Materials Engineering and Performance, 29 . pp. 2783-2791.

Tome, Sylvain and Etoh, Marie-Annie and Etame, Jacques and Kumar, Sanjay (2020) Improved Reactivity of Volcanic Ash using Municipal Solid Incinerator Fly Ash for Alkali-Activated Cement Synthesis. Waste and Biomass Valorization, 11 (IF-2.358). pp. 3035-3044.

Toymoori, A and Webster, T (2020) The role of nanomedicine in the treatment of osteosarcoma and in the prevention of infections. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 1-12.

Tripaliya, S S and Gupta, M K and Sahu, Rina and Pappu, A and Sharma, C and Chaturvedi, A K and Srivastava, A K (2020) Tuning surface resistivity and thermal conductivity of water resistant fly ash waste based polymer composite via tailoring the interfacial polarization. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 71-80.

Vanithakumari, S C and George, R P and Mudali, U Kamachi (2020) High performance specialized coatings for applications in corrosive environments. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 13-27.

Varshney, A and Sangal, S and Pramanick, A K and Mondal, K (2020) On the extent of transformation of austenite to bainitic ferrite and carbide during austempering of high Si steel for prolonged duration and its effect on mechanical properties. Materials Science and Engineering A, 793 (IF-4.652). p. 139764.

Verma, Piyush Chandra and Mishra, Suman K (2020) Synthesis of iron boride powder by carbothermic reduction method. Materials Today: Proceedings, Online (SNIP-0.576).

Book or NML Publication

Abhilash, (2020) Dissimilatory Iron-Reducing Bacteria: A Template for Iron Mineralization and Nanomaterial Synthesis. In: Microbes for Sustainable Development and Bioremediation. CRC Press, US, pp. 89-106. ISBN 9780367226008

Agarwal, Sanjay and Kim, Hong-In and Park, K H and Lee, Jin-Young (2020) Thermodynamic Aspects for Rare Earth Metal Production. In: Rare-Earth Metal Recovery for Green Technologies, Methods and Applications. Springer, Switzerland, pp. 39-56. ISBN ISBN 978-3-030-38106-6 (eBook)

Choubey, Pankaj K and Jha, Manis K and Pathak, D D (2020) Recovery of Manganese and Cobalt from Discarded Batteries of Toys. In: Rare Metal Technology 2020. The Minerals, Metals & Materials Society 2020, pp. 275-281.

Jha, Manis K and Kumari, Archana and Panda, Rekha and Parween, R and Chakravarty, S and Kumar, J Rajesh (2020) Coal Burn Ash: A Sustainable Future Resource for Critical Metals Production. In: Clean Coal Technologies. Springer, Nature.

Kumar, Sunil and Mishra, T (2020) Organization of Bio-Molecules in Bulk and Over the Nano-Substrate: Perspective to the Molecular Dynamics Simulations. In: Biointerface Engineering: Prospects in Medical Diagnostics and Drug Delivery. Springer Nature Singapore, pp. 149-166.

Kumari, Archana and Jha, Manis K and Chakravarty, S and Pathak, D D (2020) Indian Coal Ash: A Potential Alternative Resource for Rare Earth Metals (REMs). In: Rare Metal Technology 2020. The Minerals, Metals & Materials Society 2020, pp. 265-273.

Nath, S K (2020) Reaction Kinetics of Fly Ash Geopolymerization by Analyzing Calorimetry Data. In: Geopolymers. Central West Publishing.

Panda, Rekha and Jha, Manis K and Dinkar, Om Shankar and Pathak, D D (2020) Reclamation of Precious Metals from Small Electronic Components of Computer Hard Disks. In: Rare Metal Technology 2020. The Minerals, Metals & Materials Society 2020, pp. 243-250.

Conference or Workshop Item

Ammasi , A and Ashok, K and Thatoi, S and Singh, D.P (2020) Flux Development for Dephosphorization of Steel in Induction Furnace. In: International Conference on Steelmaking and Casting - Sustainable Technology and Practices (SMCSTP2020) , 6 - 7 February 2020, Jamshedpur, India.

Jha, Dipali and Kumari, Suruchi and Kumari, Aarti and Sahu, S K and Prasad, Ranjit (2020) Advances in Synthesis, Luminescence and Characterization Studies of Red Phosphor. In: National Conference on Advancement in Material Processing Technology, October 31 to November 02, 2020, Jamshedpur.

Jha, Manis K and Kumari, Archana and Panda, Rekha and Choubey, Pankaj K and Gupta, Rajesh (2020) Recycling of EV Li-ion batteries to reclaim valuable metals/ materials. In: National Symposium on “Opportunities and Challenges in Materials for Energy Generation and Storage for Electric Vehicles”, 3-4 January 2020, Pune, Maharashtra.

Mishra, Praveen and Kumari, Aarti and Jha, Dipali and Randhawa, N S and Sahu, S K (2020) Extraction of rare earths from waste SmCo magnet. In: National Conference on Advancement in Material Processing Technology, October 31 to November 02, 2020, Jamshedpur.

Priya, Jayati and Randhawa, N S and Hait, Jhumki (2020) Thermochemical Simulation, Thermogravimetry and Roasting Studies for Selective Sulfation of Copper in Flash Smelter Dust. In: 22nd DAE-BRNS Sysmposium on Thermal Analysis (Thermans2020), 30 Jan-01 Feb 2020, BARC (Mumbai).

Randhawa, N S and Kumari, Aarti and Sahu, S K (2020) Chloridizing Roasting of Spent NdFeB Magnet Using Ammonium Chloride. In: 22nd DAE-BRNS Symposium on Thermal Analysis (Thermans 2020), 30 Jan-01 Feb 2020, BARC (Mumbai).

This list was generated on Sun Aug 1 01:53:50 2021 IST.