Items where Subject is "Metallurgy > Metal Working Processes"
Group by: Creators | Item Type
Number of items at this level: 23.
Das, Anindya and Ghosh, M and Tarafder, S and Chakrabarti, D (2017) Micromechanisms of deformation in dual phase steels at high strain rates. Material Science and Engineering A Structural Materials Properties Microstructure and Processing, 680 (IF-3.094). pp. 249-258.
Das, B N (1959) Some recent developments in metal working techniques. NML Technical Journal, 1 (4). pp. 34-40.
Datta, A K and Sivaprasad, S and Prasad, P (2016) System approach of modeling of high rise steel structures against earthquake excitations. Journal of Metallurgy and Materials Science, 58(1) (IF-0.04). pp. 25-33.
Dixit, P and Makhija, D and Mukherjee, A K and Singh, V and Bhatanagar, A and Rath, R K (2019) Characterization and Beneficiation of Dry Iron Ore Processing Plant Reject Fines to Produce Sinter/Pellet Grade Iron Ore Concentrate. Mining Metallurgy & Exploration, 36(2) . pp. 451-462.
Guguloth, K and Swaminathan, J and Roy, Nilima and Ghosh, R N (2017) Uniaxial creep and stress relaxation behavior of modified 9Cr-1Mo steel. Materials Science and Engineering A- Structural Materials Properties Micro-structure and Processing, 684 (IF-3.094). pp. 683-696.
Kumar, Vinod (2016) Thermo-mechanical simulation using gleeble system - advantages and limitations. Journal of Metallurgy and Materials Science, 58(1) (IF- 0.04). pp. 81-88.
Meshram, Pratima and Somani, M and Pandey, B D and Mankhand, T R and Deveci, Haci and Abhilash, (2017) Two stage leaching process for selective metal extraction from spent nickel metal hydride batteries. Journal of Cleaner Production, 157 (IF -5.715). pp. 322-332.
Mishra, Suman K and Sherbakov, V A (2016) In-situ synthesis of Ti-Si-C fine grained composite with different amount of TiC: Microstructure and mechanical properties. International Journal Of Refractory Metals & Hard Materials, 59 (IF- 2.155). 19-25.
Mukherjee, K and Matlock, DK (2016) Simulation of bar rolling in gleeble. Journal of Metallurgy and Materials Science, 51(1) (IF- 0.04). pp. 65-68.
Patra, A S and Gogoi, Gaurangi and Sahu, Ranjan K and Qureshi, M (2017) Modulating the electronic structure of lanthanum manganite by ruthenium doping for enhanced photocatalytic water oxidation. Physical Chemistry Chemical Physics, 19(19) (IF-4.123). pp. 12167-12174.
Paul, Surajit Kumar and Roy, Satish and Sivaprasad, S and Bar, H N and Tarafder, S (2017) Local Ratcheting Response in Dissimilar Metal Weld Joint: Characterization Through Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 26(10) (IF-1.331). pp. 4953-4963.
Puvvada, G V K and Chandrasekhar, K and Ramachandrarao, P (1996) Solvent extraction of gallium from an Indian Bayer process liquor using Kelex-100. Minerals Engineering, 9 (10). pp. 213-1058.
Randhawa, N S and Katiyar, P K (2020) Potentiodynamic Polarization Behavior and Microscopic Examination of Tungsten Carbide Hard Metal Materials in Supported Ammoniacal Medium. Portugaliae Electrochimica Acta, 38(3) . pp. 185-200.
Rao, V V and Ravindra, V (2020) Vacuum furnaces for metallurgical processing. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 97-101.
Sharma, Sweta and Khan, Soib and Ranjan, Rajiv and Choudhary, R N P (2017) Analysis of impedance and electric modulus properties of sensing and transducing material lead zirconate titanate (PZT) ceramics doped with gadolinium. Journal of Metallurgy and Materials Science, 59(2) . pp. 49-58.
Shekhar, Saurabh and Sinha, S and Mishra, D and Agrawal, A and Sahu, K K (2020) A sustainable process for recovery of potash fertilizer from glauconite through simultaneous production of pigment grade red oxide. Sustainable Materials and Technologies, 23 (IF-4.375). e00129.
Singh, Raghuvir and Dahotre, N B (2005) Tribology of laser modiﬁed surface of stainless steel in physiological solution. Journal of Materials Science, 40 . pp. 5619-5626.
Srivastava, V C and Poddar, Palash and Rajnikanth, V and Sahoo, K L (2012) Light metals research - Legacy and current standing. Science & Culture, 78(11-12) . pp. 527-531.
Srivastava, V C and Sahoo, K L (2006) Metallic Foams : Current Status and Future Prospects. IIM Metal News, 9 (4). pp. 9-13.
Conference or Workshop Item
Singh, Raghuvir and Das, Goutam and Suman, Satyarth and Singh, P K (2008) Response of Weld Joints in Stainless Steel 304LN Pipe to Low Temperature Sensitization. In: IIW- IC-2008 Chennai, 8-10 January, 2008, Chennai.
Srivastava, V C and Singh, Mirtunjay and Kumar, Tipu and Sahoo, K L (2011) Effect of Al-alloy composition and foaming temperature on pore size, density and mechanical properties. In: International Conference on Porous Metals and Metallic Foams (MetFoam-2012), September 18-21, 2011, Busan, Korea.
Srivastava, V C and Singh, T and Kumar, S and Ghosh Chowdhury, S and Jindal, Vikas (2007) Microstructural Characteristics of Accumulative Roll Bonded Ni-Al Based Metal Intermetallic Laminate Composite. In: International Conference on Recent Advances in Composite Materials, 2007, New Delhi, India, February 20-23, 2007, New Delhi.
Rajnikanth, V and Ray, Ajoy K and Das, Goutam and Ghosh, M and Das, Swapan K and De, P K (2008) Strain Hardening behavior of Al-Sc alloys. Exploratory (OLP). NML, Jamshedpur. (Submitted)