Items where Division is "Material Science and Technology" and Year is 2013

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: | A | B | C | D | G | H | J | K | L | M | N | O | P | R | S | T | U | V
Number of items: 192.

Sridhar, Seetharaman and Sampson, Erica (2013) Recycling High-Residual Scrap in EAF – Fundamental Research Aimed at pushing the limits. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking , December 16-18, 2013, CSIR-NML Jamshedpur.

A

Aggarwal, Nishant (2013) Effect of Phosphorus on Mild Steel - From A Structural Engineer’s View. In: Proceeding Of International Seminar on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Ali, Tayyab and Venkataraman, A (2013) Preparation and characterization of g-Fe2O3 dispersed polyvinyl alcohol (PVA) Nanocomposite film. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 293-297.

Aruna, V A J and Ravi, B P and Haran, N P and Ram, Mohan and Gundewar, C S (2013) Recovery of phosphate from lean resources. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 209-217.

Ashok, K and Sankar, P and Maruthupandian, K (2013) Process Evaluation of AOD Stainless Steel Making In Salem Steel Plant, SAIL. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

B

Bagchi, R K and Bandhu, Vishva (2013) Technology in Secondary Steel Sector. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Bagui, S and Ray, Ashok K and Sahu, J K and Parida, N and Swaminathan, J and Tamilselvi, M and Mannan, S L (2013) Influence of Saline Environment on creep rupture life of Nimonic-263 for marine turbine application. Material Science and Engineering A-Stuctural Materials properties Microstructure and processing, 566 (IF-2.003). pp. 54-60.

Ballal, N B and Kadri, Irfan and Kothari, Anil Kumar and Viswanathan, N N (2013) Modelling of Processes in the Trickling Zone of the Iron Blast Furnace. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Park, Song and Lee, Min Ho (2013) Plasma nitriding of AISI 304 stainless steel: Role of surface mechanical attrition treatment. Materials Characterization, 85 (IF-1.880). pp. 38-47.

Bar, H N and Sivaprasad, S and Narasaiah, N and Paul, S K and Sen, B N and Chandra, Sanjay (2013) Low Cycle and Ratchetting Fatigue Behavior of High UTS/YS Ratio Reinforcing Steel Bars. Journal of Materials Engineering and Performance, 22(6) (IF- 0.92). pp. 1701-1707.

Baral, Jayashree and Swaminathan, J and Ghosh, R N (2013) Creep Behaviour of 9CrMoNbV (P91) Steel having a Small Amount of Boron. Procedia Engineering, 55 . pp. 88-92.

Basu, T S and Ray, Mallar and Bandopadhyay, N R and Pramanick, A K and Hossain, S M (2013) Performance Enhancement of Crystalline Silicon Solar Cells by Coating with Luminescent Silicon Nanostructures. Journal of Electronic materials, 42(3) (IF-1.9). pp. 403-409.

Bera, Supriya and Ghosh Chowdhury, S and Estrin , Yuri and Manna, I (2013) Mechanical properties of Al7075 alloy with nano-ceramic oxide dispersion synthesized by mechanical milling and consolidated by equal channel angular pressing. Journal of Alloys and Compounds, 548 (IF-2.390). pp. 257-265.

Biswas, Nabonita and Ghosh, T K and Mukherjee, Rajesh and Rao, S Mohan (2013) Exploiting iron values from iron ore source rock: Opportunities. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 305-311.

Biswas, Piyalee and Das, S and Sarkar, Paromita and Choudhary, Kamal and Baidya, Prasanta and Giri, P and Ghosal, A and Bandyopadhyay, A K (2013) Rectificaton of Energy transport in nonlinear metamaterials via ratchets. Journal of Physics D-Applied Physics, 46(20) (IF-2.528).

Bose, Debabrata (2013) Development of a Non-Invasive Technique Based on Infra-red Thermography to Detect and Estimate Iron in Galvannealed Coatings. Masters thesis, Bengal Engineering College and University, Shibpur.

C

Chakraborty, J and Ghosh, M and Ranjan, R and Das, Goutam and Das, D and Chandra, Sanjay (2013) X-ray diffraction and Mossbauer spectroscopy studies of cementite dissolution in cold-drawn pearlitic steel. Philosophical Magazine, 93(36) . pp. 4598-4616.

Cherian, Antony (2013) Composition analysis of minerals using non-invasive infrared thermography. Masters thesis, NIT Trichy.

Chokshi, Yakshil and Dutta, S K (2013) Production of Iron Ore-Coal Composite Briquette/Pellet by Using Fly-Ash and Other Binders. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Choudhary, Shyam K and Bhadu, Manish Kumar and Guin, Akshya Kumar and Pramanick, A K and Ghosh, Nabarun and Rout, Tapan Kumar and Das, Sumitesh (2013) Boiling Study of Nanofluid on Graphene Coated Substrate. Journal of Nanofluids, 2 . pp. 1-4.

Cicalé, C and Abbruzzese, G and Fortunati , S (2013) Historical Development, Present Status and Future of Electrical Steel. In: Proceedin of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

D

Das, Arpan (2013) Martensite–Void Interaction. Scripta Materialia, 68(7) (IF-2.821). pp. 514-517.

Das, Arpan and Poddar, Palash (2013) Structure–wear-property correlation. Materials & Design, 47 (IF-2.913). pp. 557-565.

Das, Arpan and Sivaprasad, S and Tarafder, Mita and Das, S K and Tarafder, S (2013) Estimation of Damage in high strength steels. Applied Soft Computing, 13(2) (IF-2.140). pp. 1033-1041.

Das, C R and Albert, S K and Swaminathan, J and Bhaduri, A K and Murty, B S (2013) Effect of Boron on Creep Behaviour of Inter-critically Annealed Modified 9Cr-1Mo Steel. Procedia Engineering, 55 . pp. 402-407.

Das, H K and Basak, Sushovan and Das, Goutam and Pal, T K (2013) Influence of Energy Induced from Processing Parameters on the Mechanical Properties of friction stir welded lap joint of Aluminium to Coated Steel Sheet. The International Journal of Advanced Manufacturing Technology, 64(9-12) (IF-1.205). pp. 1653-1661.

Das, Suchandan K and Mondal, G K and Sau, D C and Bandopadhay, D (2013) A Phenomenological Mathematical Model to Predict the Bosh Silicon Transport Under the Influence of Liquid Hold-up in the Dripping Zone of an Operating Blast Furnace. In: Proceeding of the International Conference on Science and Technology of ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Dhara, S and Kumar, R R and Mallick, A and Chowdhury, G M and Roy, B C and Das, A and Das, T P and Singh, U K (2013) Water Surface Tension and it’s Effect on Sintering: A Practical Experience in Bokaro Steel Plant. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Dunstone, Dick (2013) Coal Processing – Impact on Coke Quality. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Dwivedi, Deepak and Singh, C B (2013) Reduction Kinetics of Iron Ore Pellets with Coal and Coal Dust. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, Jamshedpur.

G

Ghali, Saeed Nabil and Eissa, Mamdouh and Faramawy, Hoda El and Ahmed, Azza and Mattar, Taha and Mishreky, Michael (2013) Production and Application of Advanced High Nitrogen Steel. In: Proceeding of the international Conference on Science and Technology of Ironmaking and Steelmaking , December 16-18, 2013, CSIR-NML Jamshedpur.

Ghosh, Arpita and Das, T K and Cherian, Antony and Reddy, S and Mukherjee, R and Palit Sagar, S (2013) An Infrared Imaging System for Compositional Analysis of Iron Ore. In: APCNDT 2013, 18 - 22 November 2013, Renassiance Convention Centre, Mumbai. (Submitted)

Ghosh, Arpita and Das, T K and Nayak, B and Palit Sagar, S (2013) A non-invasive technique for sorting of alumina-rich iron ores. Minerals Engineering, 45(55–58) (IF-1.207). pp. 55-58.

Ghosh, Arpita and Sharma, A K and Nayak, B and Ghosh, T K and Palit Sagar, S (2013) Infrared Thermography for Iron Ore Grading. In: Physical Separation'13, 20-21st June, 2013, Falmouth, Cornwall, UK.

Ghosh, Arpita and Sivaprasad, S and Bhattacharjee, A and Kar, S (2013) Microstructure-fracture toughness correlation in an aircraft structural component alloy Ti-5Al-5V-5Mo-3Cr. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 568 (IF-2.108). pp. 61-67.

Ghosh, M and Husain, M M and Kumar, K and Kailas, S V (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. Journal of Materials Engineering and Performance , 22(12) (IF-0.915). pp. 3890-3901.

Ghosh, M and Kumar, Rajneesh and Husain, M M (2013) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transaction A (IF-1.738).

Ghosh, S and Prakash, R V (2013) Study of Damage and Fracture Toughness due to Influence fo Creep and Fatigue of Commercially Pure Copper by Monotonic and Cyclic Indentation. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science , 44A(1) (IF-1.738). pp. 224-234.

Gomes, Leandra Saviola (2013) Synthesis of Biomimetic Ferrofluid with Apoferritin as a MRI Contrast Agent. Masters thesis, VIT University, Vellore-623014.

Goswami, B and Raj, A and Singh, M P and Ray, Ashok K (2013) Mechanical properties and ferrite formation in microalloyed steel. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 1-19.

Gupta, G S (2013) Fluid Flow Behavior In The Lower Part Of A Blast Furnace. In: Proceeding of the International conference on science and technology of iron making and steel making , December 16-18, 2013, CSIR-NML Jamshedpur.

Gupta, Pallawi and Nayar, S (2013) A Spectroscopic Study of Ferrofluid and Colloidal Graphene. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Gupta, R C (2013) The utilisation of iron ore fines : Technical options and challenges. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 235-256.

Gupta, Siddhi and Greeshma, T and Basu, Bikramjit and Goswami, Sudipta and Sinha, Arvind (2013) Stiffness-and wettability-dependent myoblast cell compa-tibility of transparent poly(vinyl alcohol) hydrogels. Journal of Biomedical Materials Research Part B-Applied, 101B (IF-2.834). pp. 346-354.

H

Haase, C and Ghosh Chowdhury, S and La, Barrales-Mora and Molodov, D A and Gottstein, G (2013) On the Relation of Microstructure and Texture Evolution in an Austenitic Fe-28Mn-0.28C TWIP Steel during Cold Rolling. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 44A (IF-1.738). pp. 911-922.

Hansda, Soma and Ghosh Chowdhury, S (2013) Recrystallization of TWIP Steels and Study of X-Ray Diffraction Pattern. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Hazra, S K and Hazra, Snehanu (2013) Coke for iron making. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Hazra, Sujan and Saxen, Henrik and Sengupta, Bhaskar (2013) Application of a One-Dimensional Steady-State Model for Process Supervision in Blast Furnace. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Hoff, Dan and Sheikh, Lubna and Bhattacharya, S and Nayar, S and Webster, T J (2013) Comparison study of ferrofluid and powder iron oxide nanoparticle permeability across the blood-brain barrier. International Journal of Nanomedicine, 8(1) (IF-3.463). pp. 703-710.

Hore, S and Das, Suchandan K (2013) Mathematical Modelling of Microstructure Evolution During Hot Strip Rolling of Trip Steel Using A Multi-Scale Framework. In: Proceeding of the international Conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Hore, S and Das, Suchandan K (2013) Monte Carlo simulation of microstructure evolution during thermo-mechanical rolling of steel using grid computing technology. In: National conference on Parallel Computing Technologies (PARCOMPTECH-2013), 21-23 FEB 2013, Bangalore.

Hunani, S R and Lodhari, D R and Dutta, S K and Das, A K (2013) Enrichment of Low Grade Iron Ore by Jigging and Shaking Table. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Husain, M M and Ghosh, M (2013) Inhibition of intermetallic formation during diffusion bonding of high-carbon steel. International Journal of Advanced Manufacturing Technology, 66 (9-12) . pp. 1871-1877.

J

Jain, Udit (2013) Corex & Finex-New Developments in Utilization of Low Grade Raw Materials. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Jamesh, M and Sankara Narayanan, T S N and Chu, P K and Park, Song and Lee, Min Ho (2013) Effect of Surface Mechanical Attrition Treatment of Titanium Using Alumina Balls: Surface Roughness, Contact Angle and Apatite Forming Ability. Frontiers of Materials Science, 7(3) . pp. 285-294.

Jana, Arpita and Devi, P S and Mitra, A and Bandyopadhyay, N R (2013) Synthesis of blue emitting ZnO nanorods exhibiting room temperature ferromagnetism. Materials Chemistry and Physics, 139(2-3) (IF-2.072). pp. 431-436.

Joni, B and Al-Samman, T and Ghosh Chowdhury, S and Csiszar, G and Ungar, T (2013) Dislocation densities and prevailing slip-sytem types determined by X-ray line profile analysis in a textured AZ31 magnesium alloy deformed at different temperatures. Journal Of Applied Crystallography, 46(1) (IF-3.343). pp. 55-62.

K

Karehanumappa, K (2013) Contribution of green pellet properties in induration of iron oxide pellet production. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 77-81.

Karmakar, A and Ghosh, M and Chakrabarti, D (2013) Cold-rolling and inter-critical annealing of low-carbon steel: Effect of initial microstructure and heating-rate. Materials Science & Engineering A, 564 (IF-2.108). pp. 389-399.

Khan, Asghar and Chakraborty, N R and Yadav, H L (2013) Solar tracking with no movable parts using multiplexed holographic lenses for photovoltaic application. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 183-186.

Khattoi, S C and Roy, G G (2013) Sponge Iron Production From Ore-Coal Composite Pellets in Tunnel Kiln. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Khutia, N and Dey, P P and Paul, Surajit Kumar and Tarafder, S (2013) Development of non Masing characteristic model for LCF and ratcheting fatigue simulation of SA333 C–Mn steel. Mechanics of Materials, Volume 65, October 2013, Pages 88–102 (IF-1.936). pp. 88-102.

Kopparthi, Prasad and Simab, Rizwan and Banerjee, P K (2013) Performance Evaluation of Synthetic Collector on Coal Flotation. In: proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking , December 16-18, 2013, CSIR-NML Jamshedpur.

Krishna, S J G and Kumar, P S and Ravi, B P and Naganoor, P C and Yadav, S and Gundewar, C S (2013) Processing Studies on a Sub Grade Iron Ore Sample From S.J.H. Mine, Sandur, Karnataka. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, Dec 16-18,2013, CSIR-NML Jamshedpur.

Kromhout, Jan and Carless, Stephen and Dekker, Edward (2013) Revealing The Unknown: Monitoring The in-Mould Behaviour During Continuous Casting of Steel. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Kumar, Anuj and Kumar, Sanjay (2013) Developments of Paving blocks from synergistic use of red mud and fly ash using geopolymerization. Construction and Building Materials, 38 . pp. 865-871.

Kumar, Anuvrat and Garai, Subhadra (2013) Insitu Bio Mineralization of Polymer-Hydroxyapatite Nano Composites as Bone Graft. Training Report (TR). CSIR-NML, Jamshedpur. (Unpublished)

Kumar, Avinash and Mrunmaya, K P and Maharana, Sudeep and Chowdhury, Subrata Kumar and Sah, Rameshwar and Kaza, Marutiram (2013) A Real Time Model For Prediction Of Blast Furnace Hot Temperature Through Neural Network. In: Proceeding of the International conference on science and technology of iron making and steel making , December 16-18, 2013, CSIR-NML Jamshedpur.

Kumar, D Satish and Marutiram, K and Sah, Rameshwar (2013) Development of Integrated Process Control System at JSW Steel Ltd. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Kumar, Gaurav and Lichchhavi, and Pramanick, A K (2013) Characterization of Al-Si-Zr Alloy. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar, Gaurav and Lichchhavi, and Pramanick, A K (2013) Characterization of Al-Si-Zr Alloy. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar, Manoj and Sau, D C and Nishant, P and Bhattacharya, Maitreyee (2013) Reduction of ammonium paratungstate generated during hydrometallurgical processing of tungsten-copper borings. Harnessing of Nonferrous Minerals and Wastes, 828 . pp. 123-134.

Kumar D, Satish and Das, T K and Justin Joseyphus, R and Ghosh, Arpita and Palit Sagar, S and Mandal, S K (2013) Development of Online Defect Detection System for High End Wires. In: APCNDT 2013, , 18 - 22 November 2013, Renassiance Convention Centre, Mumbai..

Kundu, Subhashis and Nag, Samik and Kothari, Ajit and Ramna, R V and Rai, Shailendra and Roy, S K (2013) High Productivity and High Pci Operation at ‘H’ Blast Furnace, Tata Steel – The Operating Experiences with Indian Raw Materials. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, Dec 16-18,2013, CSIR-NML JSR.

L

Lahiri, A K (2013) Failure of drain valve reducer in de-sulfurisation unit. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 257-270.

Lal, S M and Ram, Mohan and Gundewar, C S (2013) Characterization and beneficiation of BHQ from Karnataka. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 323-327.

Lodhari, D R and Dutta, S K and Shah, R V (2013) Effect Of Aluminium, Chromium, Niobium And Titanium On On steel. In: Proceding of the International Confercnce on Science and technology of ironmaking and steel making, December 16-18, 2013, CSIR-NML Jamshedpur.

M

Madge, S V and Louzguine, D V and Inoue, A and Greer , A L (2013) Large Compressive Plasticity in a La-Based Glass-Crystal Composite. Metals, 3(1) (IF-). pp. 41-48.

Mahato, M M and Agrawal, M K and Sinha, S N (2013) Production of low sulphur spheroidal graphite pig iron in mini blast furnace by optimising slag. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 201-208.

Mandal, D and Viswanathan, S (2013) Effect of heat treatment on microstructure and interface of SiC particle reinforced 2124 Al matrix composite. Materials Characterization, 85 (IF-1.880). pp. 73-81.

Mandal, G K and Stanford, Nicole and Hodgson, Peter and Beynon, John H (2013) Static recrystallisation study of as-cast austenitic stainless steel. Materials Science and Engineering A, 576 (IF-2.108). pp. 118-125.

Mandal, S and Chakraborty, A and Ghosh, S K and Chatterjee, S (2013) Thermomechanically Controlled Processed Low Carbon Ultra Strength Steel: Microstructure and Mechanical Properties. In: Proceedings of the International Conference on Science and technology of Ironmaking and steel making, March 8-10, 2006, NML, Chennai.

Maranga, S M and Bett, Alvin Kiprono and Ndeto, Kyalo and Bett, Gilbert (2013) Kenyan Iron Ore: Mining and prospects of Processing. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Maruoka, Nobuhiro and Song, Duk-Yong and Shibata, Hiroyuki and Kitamura, Shin-ya and Gupta, G S (2013) Emulsification of Metal in Molten Salt by Gas Bubblin. In: Proceeding of The International Conference on Science and Technology of Ironmaking and Steelmaking, Dec 16-18,2013, CSIR-NML JSR.

Mazumdar, Dipak (2013) Ladle Metallurgy Steelmaking: The Role of Physical and Mathematical Modeling. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Meena, Dilip and Raj, Manish and Ranghuwansh, Mansingh and Garg, Vivek and Lakshminarasimham, B (2013) Effect of Iron Ore Lumps and Iron Ore Pellets on Production of Direct Reduced Iron. In: Proceeding of the international coconference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Minj, R K and Singh, S D and Ghorai, S and Paswan, Dayanand and Bandyopadhyay, D (2013) Development of a suitable process for effective and efficient de-phosphorisation of liquid metal in induction furnace. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Mironov, V G and Kenzhaliev, B K and Shilov, G T and Mahato, M M and Kalinin, V Yu and Suleimenov, E N (2013) The Conditions For Producing of New Iron-Based Filler Alloy For The Reconstruction Of Varied Machines' And Equipment' Parts By Mechanical Alloying Method. In: Proceeding of the International Conference on science and technology of Iron making and steel making, December 16-18, 2013, CSIR-NML Jamshedpur.

Mishra, D K and Mohapatra, J and Mahato, Banashree and Kumar, P and Mitra, A and Singh, S K and Kanjilal, D (2013) Effect of 1.2 MeV argon ions irradiation on magnetic properties of ZnO. Applied Surface Science, 282 (IF-2.112). pp. 954-959.

Mishra, Sujata and Bhatta, B C (2013) Solvent Extraction of Zr (IV) from HCl medium using Cyanex 923 as extractant in kerosene. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 299-304.

Mishra, Suman K and Bhattacharyya, A S and Rupa, P K P and Pathak, L C (2013) XPS Studies on Nanocomposite SiCN Coatings Deposited by Magnetron Sputtering. Nanoscience and Nanotechnology Letters, 4 (3). pp. 352-357.

Mishra, Vidhyadhar and Garai, Subhadra (2013) Synthesis & Characterization of Biphasic Calcium Phosphate Nano composite as Bone Tissue Engineering. Training Report (TR). CSIR-NML, Jamshedpur. (Unpublished)

Mohanta, Ojaswini and Singhbabu, Y N and Giri, S K and Dadhich, D and Das, N N and Sahu, Ranjan K (2013) Degradation of Congo red pollutants using microwave derived SrFe12O19: An efficient magnetic photocatalyst under visible light. Journal of Alloys and Compounds, 564 (IF-2.390). pp. 78-83.

Mohapatra, J and Mishraz, D K and Singh, S K and Mahato, B and Mitra, A (2013) Synthesis of Nanocrystalline Co Doped ZnO by Chemical Route and Its Magnetic Properties. Nanoscience and Nanotechnology letters, 5/5 . pp. 563-567.

Mondal, N and Pathak, P and Sengupta, P P and Roy, B C and Singh, A K and Kumar, S (2013) Reduction in Energy Consumption During Hot Rolling by Roll Bite Lubrication at Hot Strip Mill, Bokaro Steel Plant. In: proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Murthy, G V S and Das, Goutam and Das, Swapan K and Sridhar, G (2013) Microstructural investigation of defects in drill pipe. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 271-278.

Murthy, G V S and Sridhar, G (2013) Ultrasonic C-Scan evaluation of Ti-Alloy / Al brazed joint. Review of progress in quantitative nondestructive evaluation, 1511 . pp. 1120-1124.

N

Nath, Niloy K and Assis, Paulo Santos and Chowdhury, Arunava (2013) Numerical Simulation Of Ingot And Concast Steel Reheating In Batch And Continuous Type Furnace To Optimize Energy Efficiency, Quality And Productivity. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, Decenber 16-18, 2013, CSIR-NML JSR.

Nautiyal, Ashish and Upadhyay, T C (2013) Theoretical study of second order phase transition in hydrogen bonded order-disorder type pyroelectric cerium doped triglycine sulphate (Ce-TGS) Crystal. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 165-181.

Nayak, B and Das, Swapan K and Munda, Parikshit (2013) Biogenic signature and ultra microfossils in ferromanganese nodules of the Central Indian Ocean Basin. Journal of Asian Earth Sciences, Volume 73, 5 September 2013, Pages 296–305 (IF-2.379). pp. 296-305.

Nazri, Mobashshir Hameed and Ghosh Chowdhury, S (2013) Project Report on Reverse Austenitic Formation in 301 in Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

O

Ostwal, Chaitanya and Garg, Ayushi and Saptputre, Pranshu and Sasikumar, C (2013) Investigation of microwave heating in iron production. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Otten, Björn and Bhanja, Asoke (2013) Design, Erection and Implementation of a By-Product Plant at SAIL- IISCO Steel Plant in Burnpur, India1. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

P

Palit Sagar, S and Metya, Avijit Kumar and Prakash, Amit and Das, Arpan (2013) Development of Methodology to Analyse the Amplitude of Ultrasonic Signal from Shell/Core Interface of ICDP Rolls. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Parida, N (2013) Quality Assessment of Coated Rear Housing Component by Ultrasonic Technique. Consultancy (CNP). CSIR-NML.

Palit Sagar, S and Prakash, Amit and Metya, Avijit Kumar (2013) Determination of modulus of Aluminium alloy by ultrasonic technique. Sponsored (SSP). Internal Report, Jamshedpur.

Palit Sagar, S and Ravi Kumar, B and Murthy, G V S and Metya, Avijit Kumar and Prakash, Amit and Mahato, B (2013) Evaluation of Residual Stress of HSS Rolls by Ultrasonic and X-ray diffraction based techniques. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Panda, A K and Roy, Rajat K and Dey, Sushmita and Singh, S and Mitra, A (2013) Functional gradation through preferential crystallisation and interfacial activity in rapidly quenched Fe/Co-based bilayered ribbons for bend sensors. Journal of Applied Physics, 114/2 . 023909.

Panda, A K and Roy, Rajat K and Mitra, A (2013) Electromagnetic Non-destructive Evaluation of Post Weld Heat Treated Modified9Cr-1Mo Steel Weldments. In: Asia pacific conference on NDT (APCNDT) 2013, 18-22 Dec 2013, Mumbai.

Pansari, Avinaw and Palit Sagar, S (2013) Development of an Online IR-Thermography based Non-Invasive Technique to Detect and Estimate Iron in Galvannealed IF Steel Sheet. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Parijat, Prateek and Bhattacharya, Maitreyee (2013) Process for the Recovery of Tungsten by Oxidative Roasting and Leaching. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Parveen, Nikhat and Murthy, G V S (2013) Characterization of electrical behavior in modified ilmenite. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 195-200.

Pathak, B N and Sahoo, K L and Mishra, Madhawanand (2013) Effect of Machining Parameters on Cutting Forces and Surface Roughness in Al-(1-2) Fe-1V-1Si Alloys. Materials and Manufacturing Processes, 28(4) . pp. 463-469.

Patil, Deepak C and Kori, S A and Venkateswarlu, K and Das, Goutam and Alhajeri, S N and Langdon, T G (2013) Using ball indentation to determine the mechanical properties of an Al-7475 alloy processed by high-pressure torsion. Journal of Materials Science, 48(13) (IF-2.163). pp. 4773-4779.

Patil, M R and Ravi, B P and Krishna, S J G and Kumar, P S and Rudrappa, C and Gundewar, C S (2013) Processing Studies on Iron Ore Tailings Sample For Pelletisation Plant From Barbil Region, Orissa. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Paul, Surajit Kumar and Tarafder, S (2013) Cyclic plastic deformation response at fatigue crack tips. International Journal of Pressure Vessels and Piping, 101 (IF-0.989). pp. 81-90.

Peyton, A J and Stefani, F and Eckert, S and Timmel, K and Wondrak, T and Gerbeth, G (2013) Electromagnetic Induction Tomography for Monitoring Liquid Metal Flow During Continuous Casting. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Phani Kiran, K S and Sivalingaraju, B and Reddy, Siddaling and Venkateswarlu, Y and Marutiram, K and Naha, T K (2013) Use of Petroleum Coke as an Additive in Metallurgical Coke Making. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Prakrathi, S and Udupa K, Rajendra and Bhat K, Udaya (2013) Microstructural characterization and indentation creep behavior of friction stir modified Al surface with iron powder. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 131-140.

Pramanick, A K and Dhayal, A and Kailath, A J and Yaneva, S and Stoichev, N (2013) Oxide Layers on Rapidly Solidified and Bulk Al-Si-Zr Alloys Formed by Oxidation in Air and Anodizing Process. In: Nanoscience & Nanotechnology-13. Bulgarian Academy of Sciences, Bulgaria, pp. 137-139. ISBN ISBN 1311-9702

Pramanick, A K and Sinha, Arvind and Nayar, S and Das, Goutam and Mitra, A (2013) Biomimetic Hydroxyapatite Coating on Zirconium Based Biocompatible Alloys. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Submitted)

Pramanik, S and Mitra, S K (2013) Hollow Briquette- A Novel Method of Agglomeration. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Puranika, Ganesha and Raj, Manish and Borkar, Moreshwar and Lakshminarasimham , B (2013) Impact Of Chemistry And Inclusions On Fracture Toughness Of Rail Steel:Case Study At JSPL. In: Procceding of the Inter national conference on science and technology of Iron making and steel making, December 16-18, 2013, CSIR-NML Jamshedpur.

R

Rajnikanth, V and Mukherjee, K and Ghosh Chowdhury, S and Schiebahn, A and Harms, A and Belck, W (2013) Mechanical property and microstructure of resistance spot welded twinning induced plasticity-dual phase steels joint. Science and Technology of Welding and Joining, 18/6 (IF-1.274). pp. 485-491.

Ranjan, Priya and Goswami, B and Prasad, Sanjay and Sharma, G S and Singh, R P and Prasad Rao, S Siva and Das, Goutam (2013) Microstructure and properties of the new bainitic rail steels. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 119-130.

Ranjan, Rajeev and Srivastava, R K and Paswan, M K (2013) Quality Engineering Applications in Continuous Casting for Steel Making Technology. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Rao, Y S and Bandyopadhyay, A and E, Murugan (2013) Recycling of Corex Sludge Through Sludge Agglomeration Process. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Ravi Kumar, B and Sharma, S (2013) Recrystallisation Characteristics of Cold Rolled Austenitic Stainless Steel during Repeated Annealing. Recrystallization and Grain Growth V, 753 . pp. 157-162.

Ravi Kumar, B and Sharma, Sailaja and Munda, Parikshit and Minz, R K (2013) Structure and microstructure evolution of a ternary Fe–Cr–Ni alloy akin to super martensitic stainless steel. Materials & Design, 50 (IF-2.913). pp. 392-398.

Ray, Ajoy K and Kar , Abhijit and Kori, S A and Pathak , L C and Sonnad, A N (2013) Graphite-to-304SS Braze Joining by Active Metal-Brazing Technique : Improvement of Mechanical Properties. Journal of Materials Enginnering and Performance, 22(1) (IF-0.915). pp. 258-266.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2013) Frontiers of micro-alloyed steel for industrial merchandising-1. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 83-98.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2013) High strength low alloy steels. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 21-36.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2013) Studies on pyrometallurgy of vanadium bearing iron, steel and slag. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 99-111.

Ray, Kalyan Kumar and Roy, Himadri and Ray, Ayan and Dutta, Krishna and Tarafder, S (2013) Deformation, fatigue and fracture vis-à-vis deformation induced martensite in AISI 304LN stainless steel. Advanced Materials Research, 794 . pp. 415-428.

Reddy, P S R (2013) Challenges and opertunities of coal cleaning in India. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Reddy, S and Wasnik, S and Guha, Avijit and Kumar, J M and Sinha, Arvind and Singh, Shashi (2013) Evaluation of nano-biphasic calcium phosphate ceramics for bone tissue engineering applications : In vitro and preliminary in vivo studies. Journal of Biomaterials Applications, 27(5) (IF-2.640). pp. 565-575.

Reddy, S P and Sarath, K Sai (2013) Characterstics of Al-15% graphite composites. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 73-76.

Roshan, Vibhuti and Chandra, Anand and Sharma, S K and Nageswara Rao, G V S (2013) Effect of Surface Area on Green Properties of Micro Pellets. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Rout, Bapin K and Awasthi, S and Choudhary, S K and Singh, R K and Ajmani, S K (2013) Development of Nozzle Clogging Index to Assess The Casting Behavior During Continuous Slab Caster At. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Roy, Arijit and Manna, I and Tarafder, S and Chattoraj, I (2013) Hydrogen interactions with overload in modifying fatigue crack growth rate recovery in an HSLA steel. Materials Science and Engineering A, 579 (IF-2.108). pp. 9-17.

Roy, Arijit and Manna, I and Tarafder, S and Sivaprasad, S and Paswan, S and Chattoraj, I (2013) Hydrogen enhanced fatigue crack growth in an HSLA steel. Materials Science and Engineering A, 588 (IF-2.108). pp. 86-96.

Roy, H and Ray, A and Barat, K and Hochmuth , C and Sivaprasad, S and Tarafder, S and Glatzel, U and Ray, K K (2013) Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steel. Materials Science & Engineering A, 561 (IF-2.003). pp. 88-99.

Roy, Nilima and Bagui, S and Sahu, J K and Ray, A K (2013) Creep characterization and damage assessment of long term service exposed P-22 grade of steel. Materials Science and Engineering A, 560 (IF-2.108). pp. 802-810.

Roy, Nilima and Guguloth, K and Bagui, Sumanta and Tiwari, Y N and Ray, Ashok K (2013) Damage assessment of service exposed reactor and distill-ation column materials of a petrochemical industry. Engineering Failure Analysis, 28 (IF-0.855). pp. 289-301.

Roy, Rajat K and Bapari, H and Panda, A K and Mitra, A (2013) Development of high strength stainless steel brazed joints using rapidly solidified filler alloys. Science and Technology of Welding and Joining, 18(3) (IF-1.274). pp. 216-221.

Roy, Rajat K and Das, Swapan K (2013) Failure of LTSH tubes in a coal fired thermal power plant. Metal News, 16(2) (Non-SCI). pp. 14-16.

Roy, Rajat K and Panda, A K and Mitra, A (2013) Microstructure Evolution and Bonding Strength of Brazed Joint of Stainless Steel and Copper. Indian Welding Journal, 46(1) . pp. 1-5.

Rudrappa, C and Patil, M R and Rudramuniyappa, M V and Naganoor, P C and Ravi, B P and Chitraki, K (2013) Beneficiation Studies on a Sub Grade Iron Ore Sample Form Barbil Region, Orissa. In: Proceeding of the international on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Rudrappa, C and Patil, M R and Rudramuniyappa1, M V and Naganoor, P C and Ravi, B P and Chitraki, K (2013) Beneficiation Studies on a Sub Grade Iron Ore Sample From Barbil Region, Orissa. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

S

Sah, Rameshwar and Dutta, S K and Singh, Vimal and Ghorui, P K (2013) Kinetics and Mechanism of Reduction of Iron Ore-Coal Composite Pellets and Its Usage in Smelting Reduction Process. In: Proceeding of the international conference on science and technology of ironmaking and steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Sahu, J K and Gupta, R K and Swaminathan, J and Paulose, N and Mannan, S L (2013) Influence of hot Corrosion on Low Cycle fatigue behavior of Nickel base Superalloy SU 263. International Journal of Fatigue, 51 (IF-1.976). pp. 68-73.

Sahu, S C and Samantara, A K and Dash, A and Juluri, R R and Sahu, Ranjan K and Mishra, B K and Jena, B K (2013) Graphene-induced Pd nanodendrites: A high performance hybrid nanoelectrocatalyst. Nano Research, 6/9 . pp. 635-643.

Samanta, Salkat and Goswami, M C and Baidya, T K and Mukherjee, S and Dey, R (2013) Mineralogy and carbothermal reduction behaviour of vanadium-bearing titaniferous magnetite ore in Eastern India. International Journal of Minerals Metallurgy and Materials, 20(10) (IF-0.483). pp. 917-924.

Santosh, Sachin and Shukla, A K (2013) Data Based Modeling Approach to Iron and Steel Making Processes. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking , December 16-18, 2013, CSIR-NML Jamshedpur.

Sarkar, Partha and Roy, Rajat K and Panda, A K and Mitra, A (2013) Optimization of process parameters for developing FeCoSiB amorphous microwires through in-rotating-water quenching technique. Applied Physics A Materials Science & Processing, 111 (IF-1.630). pp. 575-580.

Sarkar, Rahul and Gupta, Pramod and Ballal, N B (2013) Refining of metal droplet in slag using the concept of Gibbs’ Free Energy Minimization at the slag-metal interface. In: Proceedings of The International Conference on Science and Technology of Ironmaking and Steelmaking, Decmber 16-18, 2013, CSIR-NML, JSR.

Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2013) A Mathematical Model of The Raceway for Real time Application to an Operating Blast Furnace with Pulverized Coal Injection. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Selvam, S T and Chaudhuri, S and Das, Arpan and Dhara, S and Das, T P and Singh, U K (2013) Improving Productivity of Sinter Through Magnetic Segregation Chute at Sinter Plant, Bokaro Steel Plant, Bokaro Steel Plant. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Senk, Dieter (2013) Continuous Casting - Continuous Development. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Sharma, Jyoti and Sharma, T (2013) Making of Ferro Coke from Low Volatile Coking Coal. In: Proceeding of the International Conference of Science and Technology of Ironmaking and Steelmaking , December 16-18, 2013, CSIR-NML Jamshedpur.

Sharma, T and Sharma, Jyoti (2013) Firing Schedule for Goethitic Iron Ore Pellets. In: Proceeding of the International conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Sheethal, S (2013) Evaluation and optimization of electromagnetic stirring (EMS) parameters for continuously cast high carbon billet quality using ultrasonic c-scan imaging. Masters thesis, NIT, Trichy.

Singh, Ajay (2013) Effect of overaload on fatigue crack propagation. Masters thesis, National Institute of Technology , Warangal.

Singh, R J and Surbhi, (2013) Lowering of alumina in high alumina iron ores to produce DR grade iron ore pellets. Journal of Metallurgy and Materials Science, 55(1) . pp. 37-48.

Singh, R K and Misra, S (2013) Corrosion protection of stainless steel in CO2 environment by nanocoating of zinc phosphate with DLC filler. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 149-156.

Singh, Raghuvir and Kumar, Mukesh and Ghosh, M and Das, Goutam and Singh, P K and Chattoraj, I (2013) Intergranular Corrosion Behavior of 304LN Stainless Steel Heat Treated at 623 K (350 degrees C). Metallurgical and Materials Transactions A-Physical Metallurgy and Materials and Materials Science, 44A (IF-1.627). pp. 173-187.

Singh, Rajesh Kumar and Misra, S (2013) Corrosion protection of rebar steel in marine atmosphere by nanocoating. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 313-321.

Singh, Rajesh Kumar and Misra, S (2013) Corrosion protection of mild steel in SO2 environment by nanocoating with filler. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 227-234.

Singh, Satnam and Roy, P K and Ghosh, M and Mitra, A and Panda, A K (2013) Martensitic transformation and magneto-strain in melt spun NiMnGaAl Ferromagnetic Shape Memory Alloys. Intermetallics, 43 (IF-1.857). pp. 147-151.

Singh, Satnam and Roy, Rajat K and Ghosh, M and Manik, N B and Mitra, A and Panda, A K (2013) Modification in martensite morphology and magneto-strain through rapid solidification and heat treatment of NiMnGaAl alloy. Journal of Magnetism and Magnetic Materials, 343 (IF-1.826). pp. 169-172.

Singh, V and Biswas, N and Chakravarty, T and Rao, S Mohan and Banerjee, P K (2013) Exploitation of lean grade manganese ores from Joda Mines. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 59-65.

Singhbabu, Y N and Sahu, K K and Dadhich, D and Pramanick, A K and Mishra, T and Sahu, Ranjan K (2013) Capsule-embedded reduced graphene oxide: synthesis, mechanism and electrical properties. Journal of Materials Chemistry, 1 (IF-5.97). pp. 958-966.

Srinivasan, A and Ajithkumar, K K and Swaminathan, J and Pillai, U T S and Pai, B C (2013) Creep Behavior of AZ91 Magnesium Alloy. Procedia Engineering, 55 . pp. 109-113.

Srivastava, R R and Mishra, A N and Singh, V K (2013) Co-precipitation study of nickel and cobalt from ammoniacal leach liquor of laterite ore. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 67-72.

Stefanov, G and Stoichev, N and Avdeev, A and Kiradzhiyska, D and Vassilev, G and Pramanick, A K (2013) Phase Composition and High-Temperature Oxidation Behaviour of Nano-Microcrystalline Al-Si11-Zr Alloys. In: Nanoscience & Nanotechnology-13. Bulgarian Academy of Sciences, Bulgar, pp. 140-143.

Suresh, B and Rao, M Ananda and Bisoyi, Suryanarayan and Umadevi, T and Sah, Rameshwar and Ram, Maruti K (2013) Response of Reverse Flotation on Iron Ore Slimes Varying in Size Distribution and Assay Content. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Suresh, Nikkam (2013) Flowsheet Design and Layout Preparation of Coal Processing Plants. In: proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18,2013, CSIR-NML Jamshedpur.

Suresh, S and Viswanathan, N N (2013) Microwave mineral processing : A challenge in process intensification. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 141-148.

Suvarna, Kripa M and Udupa, K. Rajendra and Surendranathan, A O (2013) Corrosion studies on 316L fusion zone and base metal in natural sea water by weight loss method. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 219-226.

T

Tarafder, Mita and Sinha, Pankhuri and Kundu, Amrita and Strangwood, M and Davis, Claire (2013) Fractal based correlations for Nb microalloyed steel undergoing static recrystallization. Materials Characterization, 85 . pp. 92-99.

Teng, Lidong and Eriksson, Jan-Erik and Badrinathan, Raghu and Sjöden, Olof and Lehman, Anders (2013) Impact Of Electromagnetic Stirring (EMS) On The EAF Process. In: Proceeding of the International Conference on Science and Technology Of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Thriveni, Thenepalli and Ahn, Young Jun and Han, Choon and Nam, Um and Ahn, Ji-Whan (2013) Scalenohedral calcite crystal growth by carbonation process for CO2 sequestration. Journal of Metallurgy and Materials Science, 55(1) (Non-SCI). pp. 49-57.

Tiwari, S K and Choubey, Pankaj K and Mahapatra, S P (2013) Bound rubber properties of chlorobutyl elastomer nanocomposites: effect of carbon nanotube and storage time. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 187-193.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2013) Influence of SiO, Substitution on Corrosion Behavior of Sol-gel TiO,Coating on Mild Steel. IIM Metal News, 16(5) . pp. 1-4.

U

Um, Nam Il and Thriveni, Thenepalli and Nam, Seong-Young and Ahn, Ji-Whan (2013) Effect of water content on accelerated carbonation of municipal solid waste incinerator bottom ash for CO2 capture. Journal of Metallurgy and Materials Science, 55(2) (Non-SCI). pp. 113-117.

Upadhyay, Hemant and Kundu, T K (2013) Drain Rate and Liquid Level Simulation in Blast Furnace Hearth Based on Plant Data. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

V

Venkata Siva, S B and Ganguly, R I and Srinivasarao, G and Sahoo, K L (2013) Machinability of Aluminum Metal Matrix Composite Reinforced with In-Situ Ceramic Composite Developed from Mines Waste Colliery Shale. Materials and Manufacturing Processes, 28(10) . pp. 1082-1089.

Venkata Subramanian, G S and Deshmukh, P R (2013) Clean Coke Making Technologies. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Venkatesan, J and Ashok, K and Venkatakrishnan, P G (2013) Quantification of Slag Carry Over & Its Effect on Melting Practice of Medium Carbon Re-Sulphur Steel. In: Proceedings of The International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, CSIR-NML, JSR.

Venugopalan, T and Misra, S and Srikanth, S and Tarafder, S (2013) Preface. Transactions of Indian Institute of Metals, 66(5-6) Special Issue: SI (IF-0.215). p. 445.

Verma, N P and Sinha, Arvind (2013) Effect of solid to liquid ratio on the physical properties of injectable nanohydroxyapatite. Journal of Materials Science-Materials in Medicine, 24(1) (IF-2.141). pp. 53-59.

Viswanath, S G and Jachak, Manish M (2013) Preparation of electrolytic cobalt powder by electrodeposition from cobalt sulphate solution in presence of glycerol and sulfuric acid medium and the study of morphology of the powder. Journal of Metallurgy and Materials Science, 55(4) (Non-SCI). pp. 279-291.

This list was generated on Thu Oct 1 18:49:00 2020 IST.