Items where Year is 2012

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 289.

Annual Reports

Director, NML (2012) Annual Report 2011-2012. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Article

Abhilash, and Mehta, K D and Pandey, B D (2012) Efficacy of Bacterial Adaptation on Copper Biodissolution from a Low Grade Chalcopyrite Ore by A. ferrooxidans. International Journal of Nonferrous Metallurgy, 1 (1). pp. 1-7.

Abhilash, and Nair, D G and Hansdah, Kirtal and Dhal, B and Mehta, K D and Pandey, B D (2012) Bioremoval of Chromium (III) from Model Tanning Effluent by Novel Microbial Isolate. International Journal of Metallurgical Engineering, 1 (2). pp. 12-16.

Abhilash, and Pal , SC and Mehta, K D and Pandey, B D and Mankhand, T R (2012) Bioprocessing of a Low-grade Chalcopyrite Ore by the Isolate of Acidithiobacillus Ferrooxidans. International Journal of Metallurgical Engineering, 1(5) . pp. 72-77.

Abhilash, and Pandey, B D (2012) Synthesis of zinc-based nanomaterials: a biological perspective. IET-Nanobiotechnology, 6 (4). pp. 144-148.

Abhilash, and Pandey, B D and Ray, Lalithagauri (2012) Bioleaching of apatite rich low grade Indian uranium ore. Canadian Metallurgical Quaterly, 51 (4). pp. 390-402.

Agrawal, A and Kumari, S and Parveen, M and Sahu, K K (2012) Exploitation of Copper Bleed Stream for the Extraction and Recovery of Copper and Nickel by Bis(2,4,4-trimethylpentyl)phosphinic Acid. Mineral Processing and Extractive Metallurgy Review: An International Journal, 33 (5). pp. 339-351.

Ali, F and Scudino, S and Liu, G and Srivastava, V C and Mukhopadhyay, N K and Khoshkhoo, M S and Prashanth, K G and Uhlenwinkel, V and Calin, M and Eckert, J (2012) Modeling the strengthening effect of Al–Cu–Fe quasicrystalline particles in Al-based metal matrix composites. Journal of Alloys and Compounds, 536S . S130-S133.

Aman, Noor and Satapathy, P K and Mishra, T and Mahato, M and Das, N N (2012) Synthesis and photocatalytic activity of mesoporous cerium doped TiO2 as visible light sensitive photocatalyst. Material Research Bulletin, 47 . pp. 179-183.

Ananda Kumar, S and Sundara Raman, S Ganesh and Sankara Narayanan, T S N and Gnanamoorthy, R (2012) Fretting wear behaviour of surface mechanical attrition treated alloy 718. Surface and Coatings Technology, 206 . pp. 4425-4432.

Arthanareeswari, M and Sankara Narayanan, T S N and Kamaraj, P and Tamilselvi, M (2012) Polarization and impedance studies on zinc phosphate coating developed using galvanic coupling. Journal of coatings technology and research, 9 (1). pp. 39-46.

Balusamy, T and Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Corrosion resistant Ti alloy for sulphuric acid medium: Suitability of Ti–Mo alloys. Materials and Corrosion, 62 (1.173 (SCI)). pp. 803-806.

Bansal, A and Sinha, Arvind (2012) Dehydration driven changes in the structure and mechanical behavior of electrospun poly (vinyl alcohol) nanofibers. Materials Science and Engineering: C, 32 (3). pp. 587-593.

Basavaraja, C and Prasad, R and Shankara, B S and Shashidhar, (2012) Studies on surface morphology and thermal stability of polypyrrole-poly (e-caprolactone) polymer composites. Journal of Metallurgy and Materials Science, 54(3) . pp. 187-195.

Behera, R K and Rout, K and Nayak, B and Das, N N (2012) Removal of Selenium and Arsenic Oxyanions using Natural Goethite-Rich Iron Ore from Daitari, Orissa, India: Effect of Heat Treatment. Adsorption Science & Technology, 30(10) (IF-0.559). pp. 867-880.

Behera, R K and Swain, S K and Sen, S and Mishra, S C (2012) Property prediction of ductile iron : Artificial neural network approach. Journal of Metallurgy and Materials Science,, 54(3) . pp. 197-202.

Bera, S and Ghosh Chowdhury, S and Lojkowsky, W and Manna, I (2012) Synthesis of CuCr and CuCrAg alloys with extended solid solubility with nano-Al2O3 dispersion by mechanical alloying and consolidation by high pressure sintering. Materials Science and Engineering : A, 558 (IF-2.003). pp. 298-308.

Bhaskar Raju, G and Hanumantha Rao, K and Forsling, Willis (2012) Role of dextrin in the selective flotation of fluorite. SGAT Bulletin, 13 (1) . pp. 37-46.

Bhattacharjee, PP and Tsuji, N (2012) Development of Cube Texture in Pure Ni Following Ultrahigh by Accumaulative Roll Bonding and Annealing. Materials Science Forum, 715-716 . 521- .

Bhattacharya, S and Jenamoni, K and Nayar, S (2012) Stability of biomimetic ferrofluids established by a systematic study using microwave irradiation at defined wattages. Journal of Magnetism and Magnetic Materials, 324 (20). pp. 3261-3266.

Choudhury, Deepak and Mittal, Kapil (2012) A metallurgical investigation of microstructure of the weld bead in submerged arc welding. Journal of Metallurgy and Materials Science, 54(4) . pp. 311-320.

Das, C R and Albert, S K and Swaminathan, J and Bhaduri, A K and Raj, B and Murty, B S (2012) Improvement in creep resistance Of modified 9Cr-1Mo steel weldment By boron addition. WELDING IN THE WORLD, 56 (07-08). pp. 10-17.

Das, C R and Albert, S K and Swaminathan, J and Raju, S and Bhaduri, A K and Murty, B S (2012) Transition of Crack from Type IV to Type II Resulting from Improved Utilization of Boron in the Modified 9Cr-1Mo Steel Weldment. Metallurgical and Materials Transactions A, 43A . pp. 3724-3741.

Das, Mousumi and Das, Goutam and Ghosh, M and Wegner, Matthias and Rajnikanth, V and Ghosh Chowdhury, S and Pal, T K (2012) Microstructures and mechanical properties of HPT processed 6063 Al alloy. Materials Science and Engineering A, 558 (IF-2.108). pp. 525-532.

Das, Mousumi and Pal, T K and Das, Goutam (2012) Effect of aging and cryo rolling on microstructural chara-cterization and mechanical properties of precipitation hardenable 6063Al alloy. Material Science & Engineering, 552 (30). pp. 31-35.

Das, Mousumi and Pal, T K and Das, Goutam (2012) Use of Portable Automated Ball Indentation System to Evaluate Mechanical Properties of Steel Pipes. Transactions of the Indian Institute of Metals, 65 (2). pp. 197-203.

Das, Suchandan K (2012) Mathematical model to predict effects of fly ash hardness and angularity on erosion response of typical boiler grade steels. Tribology, 6 (2). pp. 84-92.

Das, Swapan K and Ghosh, R N and Sondhi, S K (2012) Prediction of carbide free layer formation in Fe-Ni Cr austentic steel process heater tube. Corrosion Engineering, Science and Technology, 47 (2). pp. 121-124.

Dey, K C and Sharma, V and Goswami, B (2012) Polyoxometalates : From green compounds to smart materials. Journal of Metallurgy and Materials Science, 54(2) . pp. 119-124.

Dey, Ramendra Sundar and Hajra, Saumen and Sahu, Ranjan K and Raj, C Retna and Panigrahi, M K (2012) A rapid room temperature chemical route for the synthesis of graphene: metal-mediated reduction of graphene oxide. Chemical Communications, 48 (12). pp. 1787-1789.

Dey, Shobhana (2012) Enhancement in hydrophobicity of low rank coal by surfactants - A critical overview. Fuel Processing Technology, 94 (1). pp. 151-158.

Dey, Shobhana and Pani, S (2012) Effective Processing of Low-Volatile Medium Coking Coal Fines of Indian Origin using Different Proces Variables of Flotation. International Journal of Coal Preparation and Utilization, 32(6) . pp. 253-263.

Dey, Shobhana and Pani, S and Das, Avimanyu (2012) Scanvenging of High-Value Product from High-Ash Medium Coking Coal: A Compulsion for Less Endowed Regions. International Journal of Coal Preparation and Utilization, 32(5) (0.289). pp. 238-251.

Dey, Shobhana and Pani, Santosh and Mohanta, M K and Singh, Ratnakar (2012) Utilization of Iron Ore Slimes: A Future Prospective. Separation Science and Technology, 47 (5). pp. 769-776.

Dey, Shobhana and Parolis, L A S and Yorath, G (2012) Quantification of Sulphydryl Collector-Mixture Used in Sulphide Ore Flotation. Transaction of the Indian Institute of Metals, 65 (4). pp. 387-392.

Dey, Sujit Kumar and Vidyadhar, A and Das, Avimanyu (2012) Processing of electronic waste in a counter current teeter-bed separator. Journal of Environmental Management, 107 (IF-3.188). pp. 45-51.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2012) Bacterial Reduction of Hexavalent Chromium from Contaminated Overburden Soil. International Journal of Metallurgical Engineering, 1(5) . pp. 83-87.

Dutta, S and Das, Arpan and Barat, K and Roy, Himadri (2012) Automatic characterization of fracture surfaces of AISI 304LN stainless steel using image texture analysis. Measurement: Journal of the International Measurement Confederation, 45 (5). pp. 1140-1150.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2012) Decrease of electrical conductivity activation energy of Co-coated AISI 430 alloy. Journal of Metallurgy and Materials Science, 54(2) . pp. 143-148.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2012) The effect of Cr2O3 scale on electrical conductivity of Cobalt-spinel-coated ferritic stainless steel. Journal of Metallurgy and Materials Science,, 54(3) . pp. 219-224.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2012) Evaluation of electrical conductivity activation energy of manganese coated Fe-17%Cr ferritic stainless steel. Journal of Metallurgy and Materials Science, 54(1) . pp. 87-92.

El-Amoush, Amjad Saleh (2012) Effect of hydrogen charging conditions on the hardness of tin brass heat exchanger tube. Journal of Metallurgy and Materials Science, 54(1) . pp. 53-62.

Garai, Subhadra and Jaisankar, Parasuraman and Singh, J K and Elango, Adirajan (2012) A comprehensive study on crude methanolic extract of Artemisia pallens (Asteraceae) and its active component as effective corrosion inhibitors of mild steel in acid solution. Corrosion Science, 60 . pp. 193-204.

Ghosh, C and Chatterjee, S (2012) Microstructural evolution at the interface of bond coat and steel substrate during galvanization. Journal of Metallurgy and Materials Science, 54(2) . pp. 149-153.

Ghosh, M and Husain, M M and Gupta, R K (2012) Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Plain Carbon Steel. ISIJ International, 52 (3). pp. 477-482.

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V (2012) Structural characterisation of reaction zone for friction stir welded aluminium–stainless steel joint. Materials Technology, 27 (2). pp. 169-172.

Ghosh, M and Kumar, K and Mishra, R S (2012) Process Optimization for Friction-Stir-Welded Martensitic Steel. Metallurgical & Materials Transactions A, 43A . pp. 1966-1975.

Ghosh, S and Sahu, Ranjan K and Raj, C Retna (2012) Pt-Pd alloy nanoparticle-decorated carbon nanotubes: a durable and methanol tolerant oxygen reduction electrocatalyst. Materials and Corrosion-Werkstoffe Und Korrosion, 23(38) .

Ghosh, Sabita and Das, Goutam (2012) Effect of pre strain on the indentation fracture toughness of high strength low alloy steel by means of continuum damage mechanics. Engineering Fracture Mechanics, 79 . pp. 126-137.

Gioe, Dorian and Hendrickx, Frederik and Demuynck, Maryse and Errauw, Jean-Pierre and Kumar, Rajneesh and Maas, Fleur (2012) Staal Koud Lassen, Feit of Frictie? (Cold Steel Welding, Fact Or Fiction?). Metallerie, 4 .

Gopalakrishna, K and Sivaprasad, S and Venkateswarlu, K and Hari Kumar, K C (2012) Microstructural evolution and aging behavior of cryorolled Al-4Zn-2Mg alloy. Materials Science and Engineering A, 535 (IF-2.003). pp. 129-135.

Goswami, B and Kumar, S B and Ray, Ashok K (2012) Perspectives of recent developments in nickel base superalloys. Journal of Metallurgy and Materials Science, 54(1) . pp. 31-52.

Goswami, B and Mahato, K and Sharma, V (2012) Traditional insight of strategies in steel philosophies. Journal of Metallurgy and Materials Science, 54(1) . pp. 1-29.

Goudar, D M and Rudrakshi, G B and Reddy, G J and Srivastava, V C and Wagamode , J (2012) Microstructural and hardness of spray deposited Al-30Mg2Si-2Cu alloy in solutionized and aged conditions. Materials Science : An Indian Journal, 0974-7486, 8 (8). pp. 303-308.

Guguloth, K and Swaminathan, J and Bagui, Sumanta and Ray, Ashok K (2012) Remnant Life Assessment and Microstructural Studies on Service Exposed Primary Reformer Tubes of a Catalytic Converter of an Ammonia Plant. High Temperature Materials Proceedings, 31 . pp. 759-767.

Gupta, Siddhi and Goswami, Sudipta and Sinha, Arvind (2012) A combined effect of freeze--thaw cycles and polymer concentration on the structure and mechanical properties of transparent PVA gels. Biomedical Materials, 7 (1). 015006-1.

Hiteshkumar, Patel and Jyoti, Menghani (2012) Wear characteristics of unalloyed and alloyed LM25- Aluminium casting. Journal of Metallurgy and Materials Science, 54(2) . pp. 131-135.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2012) Monte Carlo simulation of influence of reheat temperature on austenite grain growth in C‐Mn steel. Materials Science and Technology, 28(6) (IF-0.751). pp. 711-718.

Hore, S and Das, Suchandan K and Singh, Ratnakar and Bhattacharyya, K K (2012) Efficiency Study of a Water-Only Cyclone by Experimental and Data Modeling Techniques when Cleaning Indian Coal Fines. International Journal of Coal Preparation and Utilization, 32 (4). pp. 193-209.

Indulal, C R and Vaidyan, A V and Kumar, G Sajeev (2012) The ion exchange properties of nanosized cerium molybdo iodate and cerium phospho iodate. Journal of Metallurgy and Materials Science, 54(4) . pp. 299-302.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Effect of Thermal Oxidation on Corrosion Resistance of Commercially Pure Titanium in Acid Medium. Journal of Materials Engineering and Performance, 21 (6). pp. 900-906.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Electrodeposition of hydroxyapatite coating on magnesium for biomedical applications. Journal of Coatings Technology and Research, 9 (4). pp. 495-502.

Jariwala, Deep and Chandra , Kaushik and Cao, Anyuan and Saikat , Talapatra and Shima, Mutshihiro and Anuhya, D and Prasad, V V S and Ribeiro, R and Canfield, P C and Wu, D and Srivastava , Anchal and Mandal, R K and Pramanick, A K and Vajtai , Robert and Ajayan , Pulickel M and Sastry, G V S (2012) Growth of Carbon Nanotubes on Quasicrystalline Alloys. The Banaras Metallurgist, 17 . pp. 57-67.

Jha, Manis K and Choubey, Pankaj K and Jha, Amrita Kumari and Kumari, Archana and Lee, Jae-chun and Kumar, Vinay and Jeong, Jinki (2012) Leaching studies for tin recovery from waste e-scrap. Waste Management, 32(10) (IF-2.428). pp. 1919-1925.

Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Review on solvent extraction of cadmium from various solutions. Hydrometallurgy, 111-112 (IF-2.027). pp. 1-9.

Jha, Manis K and Kumari, Archana and Choubey, Pankaj K and Lee , Jae-chun and Kumar, Vinay and Jeong, Jinki (2012) Leaching of lead from solder material of waste printed circuit boards (PCBs). Hydrometallurgy, 121–124 (IF-2.027). pp. 28-34.

Kailath, A J and Mandal, Soumen (2012) The effect of Sn addition on the crystallization and thermal stability of Cu–Zr–Ti metallic glasses. Journal of Alloys and Compounds, 537 . pp. 275-279.

Kalinkin, A M and Kumar, Sanjay and Gurevich , B I and Alex, T C and Kalinkina, E V and Tyukavkina, W and Kalinnokov, V T and Kumar, Rakesh (2012) Geopolymerization behavior of Cu-Ni slag mechanically activated in air and in CO2 atmosphere. International Journal of Mineral Processing, 112 . pp. 101-106.

Krishna, K Gopala and Sivaprasad, S and Sankara Narayanan, T S N and Kumar, K C Hari (2012) Localized corrosion of an ultrafine grained Al-4Zn-2Mg alloy produced by cryorolling. Corrosion Science, 60 . pp. 82-89.

Krishna, K Gopala and Sivaprasad, S and Venkateswarlu, K and Kumar, K C Hari (2012) Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy. Materials Science and Engineering A, 535 . pp. 129-135.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2012) Electroless Ni-B-Si3N4 composite coating: deposition and evaluation of its characteristics properties. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42(7) . pp. 920-927.

Kumar, Rajneesh and Singh, K and Pandey, S (2012) Process forces and heat input as function of process parameters in AA5083 friction stir welds. Transactions of Nonferrous Metals Society of China, 22(2) (IF-). pp. 288-298.

Kumar, Sanjay and Sahoo, D P and Nath, S K and Alex, T C and Kumar, Rakesh (2012) From Grey Waste to Green Geopolymer. Science and Culture, 78(11-12) . pp. 511-516.

Lakshmipathiraj, P and Bhaskar Raju, G and Sakai, Y and Takuma, Y and Yamasaki, A and Kato, S and Kojima, T (2012) Studies on electrochemical detoxification of trichloroethene (TCE) on Ti/IrO2–Ta2O5 electrode from aqueous solution. Chemical Engineering Journal , 198-199 . pp. 211-218.

Lee, Jae-chun and Pandey, B D (2012) Bio-processing of solid wastes and secondary resources for metal extraction – A review. Waste Management, 32 . pp. 3-18.

Li, X and Jiao, F and Al-Samman, T and Ghosh Chowdhury, S (2012) Influence of second-phase precipitates on the texture evolution of Mg–Al–Zn alloys during hot deformation. Scripta Materialia, 66 (3-4). pp. 159-162.

Madge, S V and Louzguine, D V and Lewandowski, J J and Greer , A L (2012) Toughness, extrinsic effects and Poisson’s ratio of bulk metallic glasses. Acta Materialia, 60 . pp. 4800-4809.

Madhukar, A and Talukdar, P (2012) Melting point behavior of low dimensional systems. Journal of Metallurgy and Materials Science, 54(3) . pp. 203-207.

Mallik, Manab and Kailath, A J and Ray, K K and Mitra, R (2012) Electrical and thermophysical properties of ZrB2 and HfB2 based composites. Journal of the European Ceramic Society, 32 (10). pp. 2545-2555.

Mandal, G K and Stanford, Nicole and Hodgson, Peter and Beynon, John H (2012) Effect of hot working on dynamic recrystallisation study of as-cast austenitic stainless steel. Materials Science and Engineering A, 556 . pp. 658-695.

Mazumder, Rajat and Bandyopadhyay, N R and Palit Sagar, S (2012) Detection and quantification of lack-of-penetration in Al-Al friction stir welded plates using phased array ultrasonic technique. Journal of Non-destructive Testing & Evaluation, 10 (4). pp. 47-52.

Meshram, Pratima and Sahu, S K and Pandey, B D and Kumar, Vinay and Mankhand, T R (2012) Removal of Chromium(III) from the Waste Solution of an Indian Tannery by Amberlite IR 120 Resin. International Journal of Nonferrous Metallurgy, 1 (3). pp. 32-41.

Meyer, C and Ellendt, N and Srivastava, V C and Uhlenwinkel, V (2012) Cooling conditions for the generation of bulk metallic glass by droplet deposition. International Journal of Materials Research, 103(9) (IF-). pp. 1090-1095.

Mishra, R R and Dhal, B and Dutta, S K and Dangar, T K and Das, N N and Thatoi, H N (2012) Optimization and characterization of chromium(VI) reduction in saline condition by moderately halophilic Vigribacillus sp isolated from mangrove soil of Bhitarkanika, India. Journal of Hazardous Materials, 227-228 (IF-4.173). pp. 219-226.

Mishra, Suman K and Bhattacharyya, A S and Mahato, P and Pathak, L C (2012) Multicomponent Ti-Si-B-C superhard and tough composite coatings by magnetron sputtering. Surface and Coatings Technology, 207 . pp. 19-23.

Mishra, Suman K and Bhattacharyya, A S and Rupa, P K P and Pathak, L C (2012) XPS Studies on Nanocomposite Si-C-N Coatings Deposited by Magnetron Sputtering. Nanoscience and nanotechnology letters, 4 (3). pp. 352-357.

Mishra, Suman K and Mahanta, P and Sen, S and Pathak, L C (2012) Effect of Nitrogen on the Growth of Carbon Nitride Thin Films Deposited by RF Plasma Enhanced Chemical Vapor Deposition. Nanoscience and Nanotechnology Letters, 4 . pp. 90-94.

Mishra, Suman K and Pandey, S and Mahato, K and Shravan Kumar, K and Bysakh, S and Srimani, M and Pathak, L C (2012) Microstructural studies on EB-PVD deposited NiCrAlY, YSZ and lanthanum zirconate for thermal barrier applications. Surface and Coatings Technology, 207 (IF-). pp. 143-148.

Mohan, B M and Ghosh, Arpita (2012) Fuzzy two-term controllers with multi-fuzzy sets: mathematical models and analysis. International Journal of Modelling, Identification and Control (IJMIC), 15(3) . pp. 199-218.

Mohanty, Ashok and Tiwari, S K and Mishra, T and Chakravarty, S (2012) Making the Glitter Last – Development of A Novel Lacquer for Copper Based Alloys. Science & Culture, 78 (11-12) . pp. 550-552.

Murugesan, A P and Giribaskar, S and Gouthama, (2012) Metallographic studies on deformation microstructures of ECAE processed AA2014 aluminium alloy. Materials Science Forum, 702-703 . pp. 109-112.

Nayak, B and Mohanty, Sunati and Bhattacharyya, P (2012) Heavy Minerals and the Characters of Ilmenite in the Beach Placer Sands of Chavakkad-Ponnani, Kerala Coast, India. Journal of the Geological Society of India, 79 . pp. 259-266.

Nguyen, N V and Jeong, Jinki and Shin, Doyun and Kim, Byung-Su and Lee, Jae-chun and Pandey, B D (2012) Simultaneous Recovery of Gold and Iodine from the Waste Rinse Water of the Semiconductor Industry Using Activated Carbon. Materials Transactions, 53 (4). pp. 760-765.

Nodland, David and Ghosh, Arpita and Zargarzadeh, H and Jagannathan, S (2012) Neuro-optimal control of an unmanned helicopter. The Journal of Defense Modeling and Simulation: Applications, Methodology, Technology . pp. 1-14.

Palit Sagar, S and Miyasaka, C and Ghosh, M and Tittmann, B R (2012) NDE of friction stir welds of Al alloys using high-frequency acoustic microscopy. Non-destructive Testing and Evaluation, 27(4) (IF-0.827). pp. 375-389.

Panda, A K and Metya, Avijit Kumar and Bar, H N and Roy, Rajat K and Murthy, G V S and Palit Sagar, S and Mitra, A (2012) Non-destructive evaluation for structural health assessment. Science and Culture .

Panda, A K and Sharan, P K and Roy, Rajat K and Murthy, G V S and Mitra, A (2012) Generation and Detection of Guided waves in a Pipe with Defect using Rapidly Quenched Magnetostrictive Ribbons. Smart Materials and Structures, 21(4) . 045015.

Panda, A K and Singh, Satnam and Roy, Rajat K and Mitra, A (2012) Ferromagnetic Shape Memory Alloys (FSMAs) for Magneto-mechanical Applications. Science and Culture .

Parchur, A K and Prasad, A I and Rai, S B and Tewari, R and Sahu, Ranjan K and Okram, G S and Singh, R A and Ningthoujam, R S (2012) Observation of intermediate bands in Eu3+ doped YPO4 host: Li+ ion effect and blue to pink light emitter. AIP Advances, 2 (3). 032119-1.

Parmar, Kavita and Chongder, Durbadal and Bandyopadhyay, N R and Bhattacharjee, S (2012) Synthesis and characterization of Fe(II)-silicate precipitation tube (FeIISPT) as a heavy metal adsorbent and its comparison with Fe(III)-silicate precipitation tube (FeIIISPT). Journal of Metallurgy and Materials Science, 54(3) . pp. 269-277.

Pathak, B N and Mishra, M N and Sahoo, K L (2012) Solidification behavior, microstructure and mechanical properties of Al-(1 to 5)Fe-1V-1Si alloys. Journal of Metallurgy and Materials Science, 54(4) . pp. 291-298.

Patra, S and Hasan, Sk. Md. and Narasaiah, N and Chakrabarti, D (2012) Effect of bimodaldistribution in ferritegrainsizes on the tensileproperties of low-carbonsteels. Materials Science and Engineering A, 538 (15). pp. 145-155.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2012) True stress-controlled ratcheting behavior of 304LN stainless steel. Journal of Materials Science, 47 (11). pp. 4660-4672.

Phuong, To Duy and Duyen, Do Thi (2012) Effect of heat treatment on microstructure and hardness of high silicon aluminium alloys. Journal of Metallurgy and Materials Science, 54(2) . pp. 111-117.

Poddar, Palash and Das, Arpan and Sahoo, K L (2012) Effect of rare earth elements on tribological behaviour of magnesium alloys. Tribology: Materials, Surfaces & Interfaces, 6(4) . pp. 147-154.

Poddar, Palash and Sahoo, K L (2012) Microstructure and mechanical properties of conventional cast and rheocast Mg-Sn based alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 556 (IF-2.003). pp. 891-905.

Poddar, Palash and Sahoo, K L and Mukherjee, S and Ray, Ashok K (2012) Creep behaviour of Mg-8% Sn and Mg-8% Sn-3% Al-1% Si alloys. Materials Science and Engineering A, 545 . pp. 103-110.

Prabhu, N S and Joseyphus, J and Sankara Narayanan, T S N and Ravi Kumar, B and Mitra, A and Panda, A K (2012) Residual Stress Analysis in Surface Mechanical Attrition Treated (SMAT) Iron and Steel Component Materials by Magnetic Barkhausen Emission Technique. IEEE Transactions on Magnetics, 48(12) (IF-1.363). pp. 4713-4717.

Pramanick, A K and Gupta, Siddhi and Mishra, T and Sinha, Arvind (2012) Topographical heterogeneity in transparent PVA hydrogels studied by AFM. Materials Science and Engineering C, 32 (2). pp. 222-227.

Raghavan, S and Singh, Gaurav and Sondhi, Sanjay and Srikanth, S (2012) Construction of a pseudo-binaryphasediagram for multi-componentNi-base superalloys. Calphad, 38 . pp. 85-91.

Raj, A and Goswami, B and Ray, Ajoy K (2012) High speed steels - A tribute of microalloyed steels. Journal of Metallurgy and Materials Science,, 54(4) . pp. 225-248.

Raj, A and Goswami, B and Ray, Ashok K (2012) Forge and heat-treatments in micro-alloyed steels. Journal of Metallurgy and Materials Science, 54(4) . pp. 249-268.

Raj, A and Goswami, B and Ray, Ashok K (2012) Perspectives of creep and fatigue behavior in microalloyed steels. Journal of Metallurgy and Materials Science, 54(2) . pp. 93-110.

Raj, A and Goswami, B and Ray, Ashok K (2012) Precipitation, recrystallization and elemental propositions in micro-alloyed steels. Journal of Metallurgy and Materials Science, 54(3) . pp. 155-173.

Raji, K and Alfred Cecil Raj, S (2012) Study of safe factor of sintered aluminium alloys using extrusion process. Journal of Metallurgy and Materials Science, 54(2) . pp. 137-142.

Rajnikanth, V and Munda, Parikshit and Minj, R K and Ghosh Chowdhury, S (2012) In Quest of self Reliance: NML’s steel development program. Science and Culture, Vol.78/No.11-12 . pp. 532-536.

Randhawa, N S and Das, N N and Jana, R K (2012) Selenite adsorption using leached residues generated by reduction roasting–ammonia leaching of manganese nodules. Journal of Hazardous Materials, 241-242 (4.173). pp. 486-492.

Randhawa, N S and Jana, R K and Das, N N (2012) Manganese Nodules Residue: Potential Raw Material for FeSiMn Production. International Journal of Metallurgical Engineering, 1(2) . pp. 22-27.

Randhawa, N S and Jana, R K and Das, N N (2012) Silicomanganese production utilising low grade manganese nodules leaching residue. Mineral Processing and Extractive Metallurgy (Trans. IMM C) (0.667). pp. 1-9.

Randhawa, N S and Jana, R K and Das, N N (2012) Thermodynamics and Viscosity Aspects in Manganese Nodule Residue Smelting for Silicomanganese Production. International journal of Metallurgical Engineering, 1(5) . pp. 88-95.

Rao, M Ananda (2012) Failure investigation of a boiler bank tube from a 77 X 2 MW coal based thermal power plant in the northwest region of India. Engineering Failure Analysis, 26(12) . pp. 325-331.

Ravi Kumar, B (2012) Progress of Recrystallisation in Cold Rolled Austenitic Stainless Steel during Cyclic Thermal Process. Materials Science Forum . pp. 627-630.

Ravi Kumar, B (2012) Tensile deformation characteristics of bulk ultrafine-grained austenitic stainless steel produced by thermal cycling. Scripta Materialia, 66 (9). pp. 634-637.

Ravi Kumar, B and Sahu, J K and Das, Swapan K (2012) Influence of Annealing Process on Recrystallisation Behaviour of a Heavily Cold Rolled AISI 304L Stainless Steel on Ultrafine Grain Formation. Materials Science Forum , 715-716 . pp. 334-339.

Ray, A and Sivaprasad, S and Chakrabarti, D (2012) A critical grain size concept to predict the impact transition temperature of Ti-microalloyed steels. International of Fracture, 173(2) . pp. 215-222.

Ray, Ajoy K and Sahu, Ranjan K and Rajnikanth, V and Bapari, H and Ghosh, M and Paul, Parimal (2012) Preparation and characterization of graphene and Ni-decorated graphene using flower petals as the precursor material. Carbon, 50 (11). pp. 4123-4129.

Ray, Ashok K and Roy, P K (2012) High Cycle Fatigue and Cyclic Plastic Deformation Behav-iour of High Temperature Oxidation Resistant Titanium Aluminide Coated IMI834 Alloy at 873K. High Temperature Materials Proceeding, 31 . pp. 691-699.

Roy, Himadri and Sivaprasad, S and Tarafder, S and Ray, K K (2012) Cyclic fracture behaviour of 304LN stainless steel under load and displacement control modes. Fatigue & fracture of engineering materials & structures, 35 (2). pp. 108-113.

Roy, Rajat K and Shen, Shen and Kernion, Sam J and McHenry, Michael E (2012) Effect of P addition on nanocrystallization and high temperature magnetic properties of low B and Nb containing FeCo nanocomposites. Journal of Applied Physics, 111 . 07A301-1.

Roy, Subrata and Mandal, S K and Das, Avimanyu (2012) Segregation and Process Features in a Teeter Bed Separator as Revealed by High Speed Videography and Image Processing. Mineral Processing and Extractive Metallurgy Review: An International Journal, 06 Aug 2012 .

Roy, Subrata and Vidyadhar, A and Konar, J and Das, Avimanyu (2012) Metal Enrichment of Finely Ground Electronic Waste using Eddy Current Separation. Separation Science and Technology, 47 (12). pp. 1777-1784.

Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2012) Metallurgical heritage of India : Preservation and rejuvenation. Science and Culture . pp. 532-536.

Sahu, J K and Krupp, U and Christ, H J (2012) Fatigue crack initiation behavior in embrittled austenitic–ferritic stainless steel. International Journal of Fatigue, 45 . pp. 8-14.

Sahu, J K and Sahu, K K and Ray, A K (2012) The influence of high-temperature oxidation resistant titanium aluminide coating on low-cycle fatigue behaviour of titanium alloy IMI 834 at 600 C. Institute of Mechanical Engineers, 226 . pp. 35-41.

Sahu, K K and Mishra, D and Jha, Manis K and Agrawal, A (2012) Processing of secondaries and wastes for metal extraction. Science and culture, 78 . pp. 504-510.

Sahu, Puspendu and Shee, S K and Hamada, A S and Rovatti, L and Sahu, T and Mahato, B and Ghosh Chowdhury, S and Porter, D A and Karjalainen, L P (2012) Low strain rate deformation behavior of a Cr-Mn austenitic steel at -80oC. Acta Materialia, 60(2012) . pp. 6907-6919.

Sahu, Ranjan K and Ganguly, Koustav and Mishra, T and Mishra, M and Ningthoujam, R S and Roy, S K and Pathak, L C (2012) Stabilization of intrinsic defects at high temperatures in ZnO nanoparticles by Ag modification. Journal of Colloid and Interface Science, 366 (1). pp. 8-15.

Sahu, Ranjan K and Mohanta, Ojaswini and Pramanick, A K (2012) XPS study on the correlation of magnetic properties and site occupancy of Al doped SrFe12O19. Journal of Alloys and Compounds, 532 . pp. 114-120.

Sahu, S K and Asselin, E (2012) Effect of oxidizing agents on the hydrometallurgical purification of metallurgical grade silicon. Hydrometallurgy, 121-124 . pp. 120-125.

Sahu, Sangeeta (2012) Synthesis of Dodecaaza-Tetra-chloro-tricyclodotri- acontane macro cyclic complexes of (Cu ++ ) transition metal ions present in pulp and paper mill effluents. Journal of Metallurgy and Materials Science, 54(2) . pp. 125-130.

Saray, O and Purcek, G and Mahato, B and Ghosh Chowdhury, S (2012) Texture evolution of IF-steel sheets processed by equal-channel angular sheet extrusion (ECASE). Materials Science Forum, 702-703 . pp. 123-126.

Sarkar, Partha and Mallick, A B and Roy, Rajat K and Panda, A K and Mitra, A (2012) Structural and Giant Magneto-impedance properties of Cr-incorporated Co-Fe-Si-B amorphous microwires. Journal of Magnetism and Magnetic Materials, 324 (8). pp. 1551-1556.

Sarkar, Partha and Roy, Rajat K and Mitra, A and Panda, A K and Churyukanovaa, Margarita and Kaloshkina, Sergey (2012) Effect of Nb and Cr incorporation on the structural and magnetic properties of rapidly quenched FeCoSiB microwires. Journal of Magnetism and Magnetic Materials, 324 (16). pp. 2543-2546.

Satapathy, P K and Randhawa, N S and Das, N N (2012) Oxidative decolorization of methylene blue by leached sea-nodule residues generated by the reduction-roasting ammoniacal leaching process. Environmental Technology, 33 (5). pp. 515-522.

Sathiyamurthy, S and Thaheer, A S A and Jayabal, S (2012) Modelling and optimization of mechanical properties of Al2O3-coir-polyester composite using regasse surface methology. Journal of Metallurgy and Materials Science, 54(4) . pp. 303-310.

Sen, S and Panda, A K and Prasad, K (2012) Magnetic and electric behavior of NiFe204-PVDF nanocomposites. Material Science-Poland, 30 . pp. 415-425.

Shanmuganathan, P and Lakshmipathiraj, P and Satendra, Kumar and Sumathy, A and Srikanth, S (2012) Stability of copper smelter slag in sea water. Environmental Progress & Sustainable Energy, 31(1) . pp. 68-76.

Shukla, R and Das, Swapan K and Ravi Kumar, B and Ghosh, S K and Kundu, S and Chatterjee, S (2012) An Ultra-low Carbon, Thermomechanically Controlled Processed Microalloyed Steel: Microstructure and Mechanical Properties. Metallurgical and Materials Transactions A, 43 (12). pp. 4835-4845.

Singh, J K and Singh, D D N (2012) The nature of rusts and corrosion characteristics of low alloy and plain carbon steels in three kinds of concrete pore solution with salinity and different pH. Corrosion Science, 56 . pp. 129-142.

Singh, J K and Singh, D D N (2012) Studies on defects in galvanized coating on steel wire. Indian Journal of Chemical Technology, 19 . pp. 361-365.

Singh, R K (2012) Corrosion mitigation of stainless steel in milk by aloevera juice. Journal of Metallurgy and Materials Science, 54(1) . pp. 77-85.

Singh, Raghuvir and Ghosh Chowdhury, S and Das, Goutam and Singh, P K and Chattoraj, I (2012) Low Temperature Sensitization on the Orthogonal Surfaces of Prior deferomed AISI 304LN and aged at 673K to 873K (400 A degress C to 600 A degress C. Metallurgical and Materials Transaction A, 43A (3). pp. 986-1003.

Singh, Raghuvir and Ghosh Chowdhury, S and Das, Goutam and Singh, P K and Chattoraj, I (2012) Study on sensitization susceptibility and texture of cold rolled AISI 304LN stainless steel. Materials Science Forum, 702-703 . pp. 677-680.

Singh, Raghuvir and Kumar, Mukesh and Kumar , Deepak and Mishra, Suman K (2012) Erosion and Corrosion Behavior of Laser Cladded Stainless Steels with Tungsten Carbide. Journal of Materials Engineering and Performance, 21(11) (0.855 (SCI)). pp. 2274-2282.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cladding of tungsten carbide and stellite using high power diode laser to improve the surface properties of stainless steel. Advanced Materials Research, 585 . pp. 498-501.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cavitation Erosion in Hydraulic Turbine Components and Mitigation by Coatings: Current Status and Future Needs. Journal of Materials Engineering and Performance, 21 (7). pp. 1539-1551.

Singh, S and Roy, Rajat K and Ghosh, M and Mitra , A and Panda, A K (2012) Heat Treatment Induced Martensitic Accommodation and Adaptive Anisotropy in Melt Spun Ni55Mn22Ga23 (at.%) ribbons. Journal of Applied Physics, 112(10) .

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2012) Solvent Extraction and Separation of Copper and Zinc from a Pickling Solution. International Journal of Metallurgical Engineering, 1 (2). pp. 28-34.

Sinha, S K (2012) Metal foams - A novel field of metallurgy. Journal of Metallurgy and Materials Science,, 54(3) . pp. 175-185.

Sivaramakrishnan, C S and Prabhu, S M (2012) Electrical and thermal analysis of porous non-isothermal bed. Journal of Metallurgy and Materials Science, 54(1) . pp. 63-75.

Srivastava, V C and Poddar, Palash and Rajnikanth, V and Sahoo, K L (2012) Light metals research - Legacy and current standing. Science & Culture, 78(11-12) . pp. 527-531.

Srivastava, V C and Singh, T and Ghosh Chowdhury, S and Jindal, Vikas (2012) Microstructural Characteristics of Accumulative Roll-Bonded Ni-Al-Based Metal-Intermetallic Laminate Composite. Journal of Materials Engineering and Performance, 21(9) . pp. 1912-1918.

Tiwari, S K and Choubey, Pankaj K and Mahapatra, S P (2012) Chlorobutyl elastomer-multiwalled carbon nanotube nanocomposites as effective barrier materials. Journal of Metallurgy and Materials Science, 54(4) . pp. 279-289.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2012) Electrochemical behavior of zirconia based coatings on mild steel prepared by sol-gel method. Corrosion Science, 63 . pp. 334-341.

Upadhyay, T C and Joshi, Makarand (2012) Dielectric properties of quasi-one dimensional PbHPO4 crystal in presence of external electric field. Journal of Metallurgy and Materials Science, 54(3) . pp. 209-218.

Varma, Nitin Pratap and Garai, Subhadra and Sinha, Arvind (2012) Synthesis of injectable and cohesive nano hydroxyapatite Scaffolds. Journal of Materials Science: Materials in Medicine, 23 (4). pp. 913-919.

Venkata Siva, S B and Sahoo, K L and Ganguly, R I and Dash, R R (2012) Effect of Hot Working on Structure and Tribological Properties of Aluminium Reinforced with Aluminium Oxide Particulates. Journal of Materials Engineering and Performance, 21 (7). pp. 1226-1231.

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2012) Adsorption mechanism of mixed collector systems on hematite flotation. Minerals Engineering, 26 . pp. 102-104.

Yoo, Kyoungkeun and Lee, Jae-chun and Lee, Kwang Seok and Kim, Byung-Su and Kim, Min-seuk and Kim, Soo-kyoung and Pandey, B D (2012) Recovery of Sn, Ag and Cu from Waste Pb-Free Solder using Nitric Acid Leaching. Materials Transactions, 53 (12). pp. 2175-2180.

Book or NML Publication

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2012) Mechanical Activation of Al-Oxyhydroxide Minerals – Physicochemical Changes, Reactivity and Relevance to Bayer Process. In: LIGHT METALS 2012. TMS (The Minerals, Metals and Materials Society), pp. 15-19. ISBN 978-1-11829-139-9

Lakshmi Kruthika, N and Bhaskar Raju, G and Prabhakar, S (2012) Degradation of Tannic acid powered by TiO2 nano particles. In: Photocatalytic Materials & Surfaces for Environmental Clean-up. Material Science forum, 734 (734). Trans Tech Publications, Switzerland, pp. 117-126. ISBN 0255-5476

Murugananthan, M and Bhaskar Raju, G (2012) Removal of organic dyes and tannins by electrochemical techniques. In: Photo-Electrochemistry & Photobiology for the sustainability. Union Press, Japan, pp. 123-152.

Nodland, David and Zargarzadeh, H and Ghosh, Arpita and Jagannathan, S (2012) Neural Network-Based Optimal Control of an Unmanned Helicopter. In: Advances in Intelligent and Autonomous Aerospace Systems. American Institute of Aeronautics and Astronautics, Reston, VA, Reston, VA 20191, pp. 33-57. ISBN 978-1-60086-897-9

Conference or Workshop Item

Abhilash, and Kumari, Neha and Pandey, B D (2012) Isolation of native extremophiles from indian bauxite and red mud for mineral beneficiation. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Abhilash, and Pandey, B D and Singh, A K (2012) Bioreactor Leaching of Uranium from a Low Grade Indian Ore. In: 16th International Conference on Non-Ferrous Metals-2012, July 13-14, 2012, Hotel Le Meridien, New Delhi.

Agarwal, Sanjay and Ghorai, S and Pal, J and Ghosh, Dinabandhu (2012) Direct sintering of chromite ore fines for ferrochrome production in submerge arc furnace. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Agarwal, Sanjay and Sahu, K K and Godiwalla, K M and Jana, R K (2012) Manganese distribution between alloy & slag phases in making Fe-Si-Mn alloy from polymetallic sea nodules. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Das, Arpan and Sivaprasad, S and Das, Swapan K and Tarafder, Mita and Tarafder, S (2012) Analysis of damage in high strength steels. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interactions (CF-6), 22-25 Jan 2012, Mamallapuram, India.

Das, T K and Banerji, Pallab and Mandal, S K (2012) An embedded magnetic field sensing device utilizing giant magnetoimpedance (GMI) effect. In: 2012 Sixth International Conference on Sensing Technology, December 18 - 21, 2013, Kolkata.

Dey, Shobhana and Pani, Santosh and Das, Avimanyu (2012) Split flotation of LVMC coal to generate multiple products for complete utilization. In: International Mineral Processing Congress,2012, 24-28 Sept 2012, New Delhi.

Goswami, N G and Sahu, A K (2012) The open access electronic document delivery system (EDDS). In: Reform-2012, September 18, 2012, Le Meridian, New Delhi. (Unpublished)

Goyal, Sumit and Gupta, S K and Sivaprasad, S and Tarafder, S and Bhasin, V and Vaze, K K and Ghosh, A K (2012) Low cycle fatigue and cyclic plasticity bahaviour of Indian PHWR / AHWR primary piping materials. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22-25 January 2012, Mamallapuram, India.

Hore, S and Das, Suchandan K (2012) Monte Carlo Simulation of temperature dependence of grain growth kinetics in C-Mn Steel prior to hot rolling. In: Proceedings of the 3rd Asian Symposium on Materials & Processing (ASMP 2012), 30-31, August 2012, IIT Madras, Chennai.

Jha, Amrita kumari and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Review on e-waste recycling scenario and development of eco-friendly processes at CSIR-NML. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Jha, Manis K (2012) Status of E-waste Recycling in India and Developing Recycling Processes at CSIR-NML, India. In: Electronics Recycling Asia-2012, November 13 - 16, 2012, Guangzhou, China.

Joshi, Ritika Sadanand and Choubey, Pankaj K and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Extraction and recovery of nitric acid and copper from leach liquor of waste PCBs. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Kumar, Vinay and Lee, Jae-chun and Jeong, Jinki and Shin, Doyun and Jha, Manis K and Kumar, Vinod (2012) Enrichment of valuable metals from end-of-life printed circuit boards using mechanical recycling techniques. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Kumari, Anjan and Jha, Manis K and Sahu, S K and Hait, Jhumki and Kumar, Vinay and Kumar, J Rajesh and Lee, Jin-Young (2012) TG/DTA studies of the mixture of Korean monazite and sodium carbonate to get optimum condition for phosphate decomposition. In: International Symposium on: Converting challenges into opportunities: Iron & steel, 66th Annual technical Meeting of the Indian Institute of Metals., 16-19 November, 2012, Jamshedpur, Jharkhand.

Marinelli, María Cecilia and Giertler, Alexander and Sahu, J K and Herenu, Silvina and Alvarez-Armas, Iris and Krupp, Ulrich (2012) The Effect of Ferrite Embrittlement in Duplex Steel on Fatigue Crack Propagation from the Low (LCF) to the Very High Cycle Fatigue (VHCF) Regime. In: 19th EUROPEAN CONFERENCE ON FRACTURE, Fracture Mechanics for Durability, Reliability and Safety, August 26-31, 2012, Kazan, Russia.

Mehta, K D and Pandey, B D (2012) Bioleaching of a Copper Sulphide Concentrate by two different Strains of Acidophilic Bacteria. In: 16th International Conference on Non-Ferrous Metals-2012, July 13-14, 2012, Hotel Le Meridien, New Delhi.

Meshram, Pratima and Purohit, Bijoy Kumar and Sahu, S K and Pandey, B D (2012) Chemical Beneficiation of Indian Non-Coking Coal. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Meshram, Pratima and Sinha, Manish K and Sahu, S K and Pandey, B D (2012) Chemical Beneficiation of Low Grade Coal - A Review. In: 16th International Conference on Non-Ferrous Metals-2012, July 13-14, 2012, Hotel Le Meridien, New Delhi.

Mishra, P N and Goswami, N G and Panda, Krushna C (2012) Evaluation of R&D Projects with aid of Library and Information Science Tools and Techniques :Some thoughts. In: Information Control and Management in Digital Environment, April, 2012, NML, Jamshedpur.

Mishra, P N and Goswami, N G and Panda, Krushna C (2012) Usage Pattern of Information Resources at CSIR- National Metallurgical Laboratory,Jamshedpur, India. In: Proceedings of the National Conference on Challenges in Library Management System (CLMS 2012), 24-25 February, 2012, Indian Association for the Cultivation of Science (IACS), Jadavpur, Kolkata.

Murthy, G V S and Parveen, Nikhat and Nagesh, Ch R V S (2012) Processing of ilmenite (FeOTiO2) for value added products. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Palit Sagar, S and Parida, N (2012) Centre for Non-destructive Evaluation at CSIR-National Metallurgical Laboratory, Jamshedpur for materials characterisation and damage evaluation: an Overview. In: 18th World Conference on NDT, 18th WCNDT, 16-20 April, 2012, Durban, South Africa.

Panda, Rekha and Kumari, Archana and Hait, Jhumki and Sahu, S K and Jha, Manis K and Kumar, Vinay and Kumar, J Rajesh and Lee, Jin-Young (2012) Leaching of Korean monazite for the recovery of rare earth metals. In: NMD-ATM 2012, 16-19th November, 2012, Jamshedpur.

Randhawa, N S and Jana, R K and Das, N N (2012) Sorption characteristics of aqueous copper onto residue generated in ammoniacal leaching of manganese nodules. In: Inter. Symp. on Advances in Environment Friendly Technology in Mineral Processing and Metal Extraction (AETMME-2012), 18-20 Jan, 2012, Bhubaneswar.

Randhawa, N S and Jana, R K and Das, N N (2012) Thermodynamics and Viscosity aspects in Manganese Nodule Residue Smelting for Silicomanganese Production. In: 16th International Conference on Non-Ferrous Metals - 2012, July 13-14, 2012, Hotel Le Meridien, New Delhi.

Rao, M Ananda (2012) Failure analysis of Power Plant Components-Case studies. In: 3-day Short term course for TNEB Engineers on Thermal Power Plants, 6th – 8th August 2012, Institute of energy studies, Department of Mechanical Engineering, Anna University, Chennai - 25.

Rath, R K and Mohanty, Sunati and Nayak, B and Singh, Ratnakar and Bhattacharyya, K K (2012) A Comparative Study on Processing of High Alumina Hematite Iron Ore by Gravity, Magnetic and Flotation Methods. In: International Mineral Processing Congress (IMPC - 2012), 24 - 28 September 2012, New Delhi, India.

Saha, Jayanta and Singh, D D N and Nair, Premraj (2012) Performance Evaluation of Field Exposed Painted Constructional Steels. In: Corcon International Corrosion Conference and Expo - 2012, September 26-29, 2012, Goa, India.

Sahu, A K and Goswami, N G (2012) The open access electronic document delivery system – An initiative of CSIR-NML, Jamshedpur. In: eWorld Forum-2012, June 15-16, 2012, Ashoka Hotel, New Delhi. (Unpublished)

Sharma, Arun Kumar and Ghosh, Arpita and Das, T K and Joseyphus, R Justin and Palit Sagar, S (2012) To Establish the Feasibility of IR Thermography for Sorting of Iron Ores for Identifying & Rejecting Alumina Rich Ores. In: NDE 2012, 10th -13th December, 2012, New Delhi India.

Sheethal, S and Giridharan S Sanjay, N V and Metya, Avijit Kumar and Chacko, E Z and Singh, D K and Chandra, Sanjay and Palit Sagar, S (2012) Evaluation and Optimization of Electromagnetic Stirring (EMS) Parameters for Continuously Cast High Carbon Billet Quality using Ultrasonic C-Scan Imaging. In: National Seminar on NDE 2012, December 10 -12, 2012, Ghaziabad, Delhi.

Singh, Ranjeet K and Das, Avimanyu (2012) Study of the separation features of fine coal cleaning in kelsey centrifugal jig. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Sivaprasad, S (2012) Lecture Notes (3) Principal Stress, Plane and Angle. In: AcSIR , October, 2012, CSIR-NML. (Unpublished)

Sivaprasad, S (2012) Lecture Notes (4) Mohr’s Circle. In: AcSIR , October, 2012, CSIR-NML. (Unpublished)

Tarafder, Mita and Sujata, M and Ranganath, V R and Tarafder, S and Bhaumik, S (2012) Microstructural damage evaluation in Ni-based superalloy gas turbine blades by fractal analysis. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22-25 January 2012, Mamallapuram, India.

Tiwari, S K and Singh, Raghuvir (2012) Ceramic coatings by sol-gel method for corrosion protection of mild steel. In: National Congress on Corrosion Control, 23 – 25 August 2012, Kolkata.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2012) Recovery of values from tailing ponds of iron ore washing plants. In: International Mineral Processing Congress (IMPC - 2012), 24 - 28 September 2012, New Delhi, India.

Vidyadhar, A and Das, Avimanyu (2012) Kinetics And Efficacy Of Froth Flotation For The Recovery Of Metal Values From Pulverized Printed Circuit Boards. In: XXVI International Mineral Processing Congress (IMPC) 2012 , September 24-28, 2012, Hotel Ashok, Diplomatic Enclave, New Delhi.

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2012) Flotation Of Quartz And Hematite: Adsorption Mechanism Of Mixed Cationic/Anionic Collector Systems. In: XXIV International Mineral Processing Congress (IMPC) 2012, September 24-28, 2012, Hotel Ashok, Diplomatic Enclave, New Delhi.

Other

Director, NML (2012) Director's Desk - 61st RC Meeting of CSIR-NML (English Version). CSIR -National Metallurgical Laboratory, Jamshedpur.

Director, NML (2012) Director's Desk - 62nd RC Meeting of CSIR-NML (English Version). CSIR-NML, Jamshedpur.

Sivaprasad, S (2012) AcSIR Lecture Notes #1: 2 (854) Mechanical Behaviour of Materials. Nil, Jamshedpur. (Unpublished)

Sivaprasad, S (2012) AcSIR Lecture Notes: 2 (854) Mechanical Behaviour of Materials. CSIR-NML, Jamshedpur. (Unpublished)

Patent

CSIR-NML (2012) A non-invasive process for sorting of alumina rich iron ores. 0060NF2012.

Presentation Slide

Sahu, A K and Goswami, N G (2012) CSIR-NML Institutional Repository and Global Visibility. [Presentation Slide] (Unpublished)

Srikanth, S (2012) The Journey of CSIR-National Metallurgical Laboratory. [Presentation Slide] (Submitted)

Srikanth, S (2012) Materials Development Program at CSIR-NML, Jamshedpur. [Presentation Slide] (Unpublished)

Project Reports

Agrawal, Vishnu and Pal, Jagannath (2012) Effect of Carbon in Iron Ore Pellets. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Alam, Tanweer and Murugesan, A P and Srivastava, V C (2012) Studies on Aluminium alloy conductors for transmission lines. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Ashish, Rajat and Mukherjee, Tamajit and Kumar, Sanjay (2012) Development of Fly Ash Bricks through different Technologies and a Comparative Study of their Compressive Strength. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Bag, Amrita and Chattoraj, I (2012) Study of the Effect of Varying R-ratio on the fatigue crack growth rate behaviour of pressure vessel steels. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Banerjee, Arunima and Sivaprasad, S (2012) Fracture and Deformation Behaviour of Materials. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Berlia, Rohit and Ghosh Chowdhury, S (2012) Mechanical behaviour of TWIP steels:effect of grain size and composition. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Bhadraiah, B Veera and Goswami, M C (2012) Characterization of Pellets made of Iron Fines from Noamundi Mines. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Bhagat, R P and Vidyadhar, A and Rao, K V and Rath, R K and Vijaya Kumar, T V and Kumar, Vinod and Kumari, Neha (2012) Physico-chemical studies on the oxide mineral systems in the presence of surfactants and polymers for beneficiation of iron ores. Grant in Aid (GAP). CSIR-NML, Jamshdpur. (Submitted)

Bhagat, Raju and Mandal, Durbadal (2012) Study Microstructure and Mechanical Properties of Cast Al-Mg and Al-Mg-Zn alloy. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Chauhan, G Pratap Singh and Mandal, R K and Pramanick, A K (2012) Alloy Synthesis and Material Characterization of Zr-Ti-Nb based Alloys. Training Report (TR). CSIR -NML, Jamshedpur. (Submitted)

Dadhich S, Devesh and Sahu, Ranjan K (2012) Study of Photocatalytic degradation of Congo red pollutants using microwave derived SrFe12O19. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Dadhich S, Devesh and Sahu, Ranjan K (2012) Study of Transition Element doped Oxide based Permanent Magnets. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Das, Tuhin and Ghosh Chowdhury, S (2012) Micro Structural Characterization of Tensile Deformed TWIP Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Dutta, Anupama and Sivaprasad, S (2012) Study of Mechanical Behaviour of Materials. Training Report (TR). CSIR -NML, Jamshedpur. (Submitted)

Dwivedi, Deepak and Prajapati, Sonu and Jana, R K (2012) Studies on Adsorption of Nickel on Polymetallic Sea Nodule Residue. Training Report (TR). CSIR -NML, Jamshedpur. (Submitted)

Ghosh, Arpita and Palit Sagar, S and Das, T K and Nayak, B (2012) Development of advanced sensor-based technique for iron-ore beneficiation. Exploratory (OLP). CSIR- National Metallurgical Lab, Jamshedpur. (Submitted)

Greeshma, P and Alex, T C (2012) Reactivity of different size fractions of Tata power flyash in geopolymerization reaction. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Gujral, Amandeep and Ravi Kumar, B (2012) Deformation Induced Martensitic Transformation of 304L Austenitic Stainless Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Gupta, Savita and Poddar, Palash and Sahoo, K L (2012) An investigation on the microstructure and mechanical properties of Mg-Sn based alloys and composites. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kedia, Bipin and Panda, A K (2012) Modelling of the Electromagnetic Fluxes and Evaluation of Damage in Steels using Electromagnetic Techniques. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Khare, Priyank and Mishra, T (2012) Ultrasonic surface modification of mild steel for corrosion protection. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar, Akash and Paswan, Dayanand (2012) Preparation of DRI from Waste Iron Ore and Coal fines. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar, Manish and Malathi, M (2012) A Project Report on Application of Thermodynamics to Basic Oxygen Steelmaking Process. Training Report (TR). CSIR New Delhi, Jamshedpur. (Unpublished)

Kumar, Piyush and Ravi Kumar, B (2012) Effect of Interrupted Annealing on Recrystallization of Heavily cold-rolled Austenatic Stainless Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar, Sonam Abhilekha and Sau, D C (2012) Study on Electro-Winning of Copper Powder from the Copper Sulfate Solution. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar, Sunil and Tiwari, S K (2012) Multilayer Alloy Coating on Mild Steel for Corrosion Resistance. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar Das, Anoop and Dey, Shobhana (2012) Project on Reduction of Ash in difficult-to-float non coking Indian coal. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumari, Chitra and Nayar, S (2012) Morphological change of electrospun nanofibers of poly(vinyl) alchohol with three different biomimetic inorganic minerals. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumari, Supriya (2012) Comparative Study on Biomimetically Synthesized Ferrofluid with the help of Sodium Hydroxide and Potassium Hydroxide. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Lee, Jun Seop and Sahu, S K and Hait, Jhumki and Jha, Manis K and Kumar , Vinod (2012) Characterization and hydrometallurgical processing of Korean rare earth oxides (REOs) for extraction of rare earth metals. Training Report (TR). www.nmlindia.org, Jamshedpur. (Submitted)

Magare, Rahul W and Ghorai, Satadal (2012) Reduction of Highly Siliceous Iron Ore. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Metya, Avijit Kumar and Prakash, Amit and Palit Sagar, S (2012) Evaluation of Equiaxed zone in Continuously Cast (CC) Billets using Ultrasonic C-Scan Imaging. Sponsored (SSP). NML, Jamshedpur.

Minal, Abhishek and Agarwal, Sanjay (2012) Study on Indian chromite ore Characterization and its reduction behaviour. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Neha, and Nayar, S (2012) Synthesis and Characterization of Nanomagnetic Hydroxy-patite using both Iron Salt Solution and Ferrofluid. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Nishant, P and Kumar, Harish and Kumar, Manoj (2012) Studies on Reduction of Ammonium Paratungstate for producing the Tungsten Powder. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Panna, Praveen Kumar and Roy, Rajat K (2012) Study of Microstructural Behaviour of Medium Carbon Steel by Magnetic NDE Technique. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Pramanick, A K and Ghosh, M and Das, Goutam and Das, Swapan K and Minj, R K and Ghosh Chowdhury, S (2012) Strengthening Mechanism of Nb and V Microalloyed Low C Steel Rebars and Slabs-Phase-II. Collaborative (CLP). CSIR-NML, www.nmlindia.org. (Unpublished)

Prasad, Pendem Shiva and Hait, Jhumki (2012) Leaching Studies of Copper Anode Slime for Recovery of Valuable Metals. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Priyadarshi, Uddeshya and Mishra, Suman K and Kumar, K Shravan (2012) Multilayer Thermal Barrier Coating prepared by EB-PVD process and its structure property correlation. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Ramu, Ch. and Goswami, M C (2012) Kinetics of Gaseous Reduction of Iron Ore. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Ranjan, Atul and Srivastava, V C and Murugesan, A P (2012) Studies on Electrical Conductivity and Mechanical Properties of all Aluminium alloy Conductors. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Ranjan, Maindra and Ghosh, M (2012) The Effect of Cooling Rates on Vanadium Microalloyed Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Ranjan, Vikas and Pal, J (2012) Effect of Mgo from different Sources on Iron Ore Pellet Properties. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Ranjan, Yogesh and Humane, M M (2012) Forming Operations and Forming Limit Diagram of Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Rishi kumar, Gautam (2012) Studies on the effect of deformation and holding temperature on grain spherodisation in A356 alloy. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Roy, P K and Sahu, J K and Parida, N and Swaminathan, J and Guguloth, K and Tiwari, Y N and Sharma, R K (2012) Assessment of creep, stress ruptures and elevated temperature tensile properties of ASTM-T11 grade steel. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Satpathy, Sanjeeb Kumar and Singh, Ratnakar and Rath, R K (2012) Bond Work Index of a Low Grade Iron Ore & Flocculation and Filtration Studies on Its Concentrate & Reject. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Shanker , Gopi and Sau, D C (2012) Studies on Reduction of Ammonium Paratungstate for produc-ing Tungsten Powder and on Reduction of Hematite to produce Magnetite. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Singh, Nitesh Kumar and Mohanta, M K and Rath, R K (2012) Determination of Shatter Index, Tumbler Index and Bond work Index of Limestone. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Soni, Ashish and Humane, M M (2012) Study on high carbon steel wires and inclusion rating by Bekaert method. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Sreenu, N and Jha, Manis K and Hait, Jhumki (2012) Hydrometallurgical recovery of cobalt and other valuable metals from waste residue (beta cake) generated in zinc plant. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Surbhi, and Mishra, Suman K (2012) Deposition of Hard TI-Si-B-C Nano Composite Coatings on Steel by Magetron Sputtering:Microstructure, Mechanical and Thermal Behavior. Training Report (TR). CSIR -NML, Jamshedpur.

Tiwari, Ashutosh and Pramanick, A K (2012) Characterization of Zr-Ti-Nb alloys by AFM. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Tudu, Mohan Kherual and Sivaprasad, S (2012) Fracture and deformation behaviour of materials. Training Report (TR). CSIR New Delhi, Jamshedpur. (Unpublished)

Show/Exhibition

Director, NML (2012) CSIR-NML Exhibition Materials. [Show/Exhibition]

Thesis

Abhilash, and Pandey, B D (2012) Biohydrometallurgical Processing of Indian Uranium Ores. PhD thesis, Jadavpur University.

Chauhan, Gyanendra Pratap Singh (2012) Alloy synthesis and material characterization of Zr-Ti-Nb based alloys. Masters thesis, CSIR-NML .

Das, Arpan (2012) Phase transformation during tensile and low cycle fatigue deformation of AISI 304LN stainless steel. PhD thesis, Jadavpur University.

Dey, U K (2012) Fracture Behaviour of Dissimilar Metal Weld Materials 304 LNSS & SA508 Cl. 3 Steel in Nuclear Piping. Masters thesis, NIT, Jamshedpur.

Ganguly, Koustav (2012) Combustion synthesis of Silver (Ag) modified Strontium hexaferrite (SrFe12O19) nanoparticles for magnetic photocatalysis applications. Masters thesis, Indian Institute of Technology Kharagpur.

Jung, Kyung Bae (2012) Recovery of rare metals from e-waste using mechanical pre-treatment and hydrometallurgical techniques. Masters thesis, CSIR-National Metallurgical Laboratory.

Kumar, Niraj (2012) The Effect of Laser Beam Overlapping on the Hardness and Microstructure of AISI 414O Steel at different Laser Power. Masters thesis, Ranchi University.

Noor, Aman (2012) Synthesis, characterisation and photocatalytic evaluation of modified titania based binary oxide materials. PhD thesis, NORTH ORISSA UNIVERSITY.

Sharma, Arun Kumar (2012) Application of infrared thermography for gradation and sorting of iron ores. Masters thesis, NIT, Tiruchirapalli.

Sharma, Geetanjali (2012) Comparative Study on Biomimetically Synthesized Ferrofluid at different pH and Concentration. Masters thesis, Utkal University BBSR.

Sheikh, Lubna (2012) Study of Novel Nanomagnetic Hydroxyapatite as a Potent Biomedical System. Masters thesis, NOU, Orissa.

Srivastava, Nidhi and Abhilash, (2012) Bacterial Isolates in hexavalent chromium reduction:Applications form synthetic to real systems. Masters thesis, Trident Academy of Creative Technology (Utkal University).

Video

Mohanty, Ashok and Sahoo, K L (2012) Technological Interventions of Brassware Cluster at Moradabad by CSIR-NML. [Video]

This list was generated on Thu Mar 28 22:23:51 2024 IST.