Items where Year is 1998

Adhikari, U B and Das, S K and Banerjee, G (1998) Bonding of high fly ash content ceramic bodies at low temperatures. pp. 143-148.

AL-Jarrah, J A and Ghosh, P K and Ray, S (1998) Mixing & solidification Processing of AI-AI2o3 Composite. In: UNSPECIFIED.

Bahadur, Aruna (1998) Development and evaluation of a low chromate corrosion inhibitor for cooling water systems. Canadian Metallurgical Quarterly, 37 (5). pp. 459-468.

Bahadur, Aruna (1998) Partial substitution of chromate by borate for cooling water inhibition. ISIJ International, 38 (5). pp. 469-473.

Bahadur, Aruna (1998) Study of Film Growth on Copper in Chromate Solution by a Radioactive Tracer Technique. Journal of Materials Science Letters, 17 (8). pp. 701-704.

Bahl, O P and Mathur, R B and Dwivedi, Hariom (1998) Correlation between the Surface Energetics of Reinforcement and Mechanical Properties of Carbon/Carbon Composites. In: UNSPECIFIED.

Bandopadhyay, A (1998) Salient features of air pollution control technology in cupola furnaces. NML Technical Journal, 40 (3). pp. 69-76.

Bandopadhyay, P (1998) Coal Flotation : The Status and Outlook. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Bhadani, S N and Tewari, M and Agrawal, A and Sekhar, K C (1998) Extractive-photometric determination of cobalt(II) in steels using 4-(2-pyridylazo)resorcinol and xylometazoline hydrochloride. Journal of the indian chemical society, 75 (3). pp. 176-177.

Bhagat, R P (1998) Flocculation of Iron ore Slimes using Synthesised Starch-g-Acrylamide Copolymer. Steel India, 21 (2). pp. 43-48.

Bhakta, U C (1998) Power Plant Component Failures Investigation and Remedial Measures. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Bhaskar Raju, G and Forsling, Willis and Holmgren, Allan (1998) Complexation mechanism of dextrin with metal hydroxides. Journal of Colloid and Interface Science, 200 . pp. 1-6.

Bhatnagar, Deepak and Jancy, A (1998) Cobalt recovery from Metallurgical Wastes of Zinc Industry. In: UNSPECIFIED.

Bhattacharjee, S and Dasgupta, P and Paul, A R and Ghosal, S and Padhi, K K and Pandey, L P (1998) Mineral element composition of spinach. Journal of the science of food and agriculture, 77 (4). pp. 456-458.

Bhattacharyya, P and Chattoraj, U S and Saha, P and Sarkhel, B R and Chakrabarti, D M (1998) Salvaging the values from the rejects of a by-product recovery plant. In: UNSPECIFIED.

Bhattacharyya, P and Sarkhel, B R and Maulik, S C (1998) Efficacy of multi-gravity separator in recovery of values from waste using experimental design. NML Technical Journal, 40 (4). pp. 109-114.

Bhattamishra, A K and Lal, Kishori (1998) Influence of ageing on corrosion behaviour of Al-Mg-Si alloys in chloride and acid media. Zeitschrift fur metallkunde, 89 (11). pp. 793-796.

Biswas, A K (1998) Role of Characterisation in Mineral Seperation by Froth Flotation. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Biswas, P K (1998) Manufacturing Processes of Polymer Matrix Composite Material for Aerospace Application. In: UNSPECIFIED.

Biswas , P K and Dev, S C and Krishnan, C S S (1998) Some Critical Issues in the Processing of Magnesium Alloys & Composites. In: UNSPECIFIED.

Ca, To Duy (1998) Effect of Molybdenum on the Formation of Carbides and Phases Structure of 12Cr20Ni38Mo5-Alloy. NML Technical Journal, 40 (3). pp. 66-76.

Ca, To Duy (1998) Effect of molybdenum on the formation of carbides and phases structure of 12Cr20Ni38Mo5-alloy. NML Technical Journal, 40 (3). pp. 87-94.

Ca, To Duy (1998) Effect of Rare Earth Metals Injection & Gas Stirring on Cleanliness of Pipeline Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Effect of Rare Earth Metals on Sulphide inclusion in Pipeline Steel. In: Non-metallic inclusion in Steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Influence of Rare Earth Metals on Macrostructure of Continuously Cast Steel Rolling Pipe. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Influence of rare earth metals on macrostructure of continuously cast steel rolling pipe. NML Technical Journal, 40 (2). pp. 57-62.

Ca, To Duy (1998) Influence of Rare Earth Metals on Mechanical Properties of Pipeline Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Influence of Rare Earth Metals on Non-Metallic Inclusions in Cast Alloy Steels. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Precipitation and Gp-Zone Structures in AlZnMg(Cu, Zr) Alloys. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) The use of Rare Earth Metals for Modification of Non-Metallic inclusions in Silicon Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Chandrasekhar, K and Subramanian, S and Modak, J M and Natarajan, K A (1998) Removal of metal ions using an industrial biomass with reference to environmental control. International Journal of Mineral Processing, 53 (1-2). pp. 107-120.

Chandwani, H K and Vishwanathan, V and Mahadevan, H (1998) Environmental Issues to be Addressed in Indian Alumina Refineries and their Possible Solutions. In: UNSPECIFIED.

Chattopadhyay, A (1998) Microstructure and liberation characteristics of chalcopyrite concentrate from Indian Copper Complex, Ghatsila. NML Technical Journal, 40 (1). pp. 23-28.

Chattoraj, I and Mitra, A (1998) Changes in electrochemical responses of some Fe-B-Si-Cu-Nb alloys before and after devitrification. Scripta Materialia, 39 (6). pp. 755-761.

Chattoraj, I and Mitra, A (1998) Structure-electrochemical correlations in amorphous and devitrified Fe-based ferromagnetic alloys. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Chattoraj, I and Pathak, L C (1998) Electrochemical behavior of superconducting Bi1.4Pb0.6Sr2Ca2Cu3O10 in halide-containing acetate buffer. Corrosion Science, 54 (6). pp. 435-443.

Chaudhuri, S and Ghosh, R N (1998) Some aspects of mechanisms and modelling of creep behaviour of 2.25Cr-1Mo steel. ISIJ International, 38 (8). pp. 881-887.

Das, N and Pandey, M C and Ghosh, R N (1998) High temperature creep behaviour of single crystal superalloy. Material Science and Technology, 14 (5). pp. 429-434.

Das, S N and Thakur, R S and Ray, H S (1998) Red Mud Pollution Problems : Some observations. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 11-16. ISBN 81-87053-28-7

Datta, S and Deb, P and Bandyopadhyay, N R and Banerjee, M K (1998) Reinforcing age Hardenable Al-Cr Matrix Alloy In-Situ and by SiC/Al2O3. In: UNSPECIFIED.

Deshpande, K G (1998) Use of spent Potlining from the Aluminium Electrolytic cell as an additive to Arc Furnace Steel Melting and Cupola iron Melting in Steel industries. In: UNSPECIFIED.

Dey, Shobhana and Bhattacharya, S (1998) Comparative Performance Analysis of Frothers — A Review of Available Methodologies. Mineral Processing and Extractive Metallurgy Review: An International Journal, 18 (2). pp. 201-213.

Director, NML (1998) Annual Report 1997-1998. NML, Jamshedpur.

Director, NML (1998) List of NML Technical reports. National Metallurgical Laboratory, Jamshedpur.

Duy, C To (1998) Non-Metallic Inclusions in Carbon Steel Containing Rare Earth Metals. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Duy, P To (1998) Effect of Cao-Mgo-Re-Caf2 Synthetic Powder on Desulphurization of 12Cr20Ni38Mo5 Alloy. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Floyd, John (1998) Pollution Control in the Non-Ferrous Industries - An Indian Perspective of Worldwide Importance. In: UNSPECIFIED.

Gaur, B (1998) Effect of Surface Preparation on Corrosion of Metals and Alloys. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Ghosh, S and Das, S K (1998) Carbide Morphology Observations in Rare-Earth-Treated Fe-Al-Si-C Alloys. Materials Characterization, 41 (5). pp. 217-221.

Ghosh Chowdhury, S and Jena, A K and Ray, R K (1998) Recrystallization behavior of boron-doped Ni76Al24. Metallurgical and Materials Transactions A, 29 (12). pp. 2893-2902.

Ghosh Chowdhury, S and Mukhopadhyay, N K and Das, Goutam and Das, Swapan K and Bhattacharya, D K (1998) Failure analysis of aweld repaired steam turbine casing. Engineering Failure Analysis, 5 (3). pp. 205-218.

Ghosh Chowdhury, S and Ray, R K and Jena, A K (1998) Rolling texture in the intermetallic compound Ni76Al24(B). Materials Science and Engineering A, 246 (1-2). pp. 289-301.

Goel, Malti (1998) Reduction of Greenhouse Gas Pollution in Non-Ferrous Metal industry : Indian Perspective. In: UNSPECIFIED.

Goswami, M C and Prakash, S and Sarkar, B (1998) A reacting system cold-model foaming study simulating in-bath smelting. Scandinavian Journal Of Metallurgy, 27 (3). pp. 97-102.

Goswami, M C and Prakash, S and Sarkar, S B (1998) A reading system cold-model foaming study simulating in-bath smelting. Scandinavian Journal Of Metallurgy, 27 (3). pp. 97-102.

Goswami, M C and Prakash, S and Sinha, S N and Tiru, P (1998) Experimental study on the foaming phenomena in a non-reacting system. NML Technical Journal, 40 (2). pp. 51-56.

Goswami, M C and Singh, S D and Vaish, A K (1998) Smelting reduction of lean pyrite cynder of complex mineralogy for the production of low silicon ferro-alloys. Tool & Alloy Steels, 32 (3). pp. 9-14.

Hait, Jhumki and Jana, R K and Kumar, Vinay and Dasgupta, P and Bandyopadhyay, M and Sanyal, S K (1998) Hydrometallurgical processing of anode slime for recovery of valuable metals. In: UNSPECIFIED.

Hegde, L and Prasad, S N (1998) Formability of Metal-Matrix Composite based on Aluminium Alloy 6061 - Reinforced with Silicon Carbide Particulars. In: UNSPECIFIED.

Jakhu, M R (1998) Process Control in Flotation Plants. In: Workshop on Froth Flotation:Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Jaleel, V A and Panda, P K and Kannan, T S (1998) Evaluation of Mechanical Properties of SiC Whisker Reinforced In-Situ Composites Prepared by Carbothermal Reduction of Silicate Minerals. In: UNSPECIFIED.

Jana, R K and Gorai, Bipra and Premchand, (1998) Processing of dust materials from Indian copper plants. In: UNSPECIFIED.

Jangbahadur, S S and Garg, Rajneesh and Agarwal, Chirag (1998) Role of Phosphating systems in Electrodeposition priming & Latest Trends in Surface Coating in Automobile Industry. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Kale, B B and Kulkarni, S S and Gokarn, A N (1998) Conversion of Natural Resources through Waste reduction at the Processing Step by Briquetting Technique. In: UNSPECIFIED.

Khanna, A S (1998) New Generation Coatings - A Combination of Thermal Spray and Organic Paint Coatings to give Enhanced Corrosion Protection in Aggressive Environments. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Kohad , V P (1998) Flotation of Sulphide Ores - HZL Experience. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Kumar, Pravesh (1998) Effect of fillers on acousto ultrasonic response in GRP composites. Bulletin of Materials Science, 21 (1). pp. 93-97.

Kumar, Rakesh and Das, Samar (1998) Physicochemical and structural factors in the sulfuric acid leaching of nickel- and copper-bearing synthetic birnessites. Metallurgical and Materials Transactions B, 29 (3). pp. 527-540.

Kumar, Rakesh and Ray, R K (1998) Modeling Microstructural Heterogeneity in Materials by Using Q-Mode Factor Analysis. Materials Characterization, 40 (1). pp. 7-13.

Kumar, Rakesh and Srivastava, J P and Premchand, (1998) Utilization of iron values of red mud for metallurgical applications. In: Environmental and Waste Management (ISSN : 0971-9407). National Metallurgical Laboratory, Jamshedpur, India, Jamshedpur, India, pp. 108-119.

Kumar, Sanjay and Das, U S and Singh, K K and Ramachandrarao, P (1998) Development of ceramic floor and wall tiles from fly ash. In: UNSPECIFIED.

Kumar, Sanjay and Singh, K K (1998) Development of Corundum/Mullite Composites from fly Ash & Alumina Mix by Reaction Sintering. In: UNSPECIFIED.

Kumar, Surendra and Pradhan, B (1998) Three-Dimensional Finite Element Analysis of Composite Laminates Subjected to Transverse Impact. In: UNSPECIFIED.

Kumar, Vinay and Agrawal, A and Pandey, B D and Premchand, (1998) Processing of spent tanning and chrome plating solutions for chromium recovery. In: Seminar on Environmental & waste management: in non-ferrous metallurgical industries, 1998, NML Jamshedpur, India.

Maity, P C and Panigrahi, S C (1998) Production of Aluminium Matrix In - Situ Particulate Copmosites. In: UNSPECIFIED.

Mallick, B and Maity, P C and Sinha, V K (1998) Production of Aluminium-Silicon Carbide Cast Particle Composites Without Magnesium. In: UNSPECIFIED.

Mehrotra, S P (1998) Computer Aided Design and Synthesis of Flotation Circuits. In: Workshop on Froth Flotation : Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Mishra, Suman K and Ranganathan, S and Das, Swapan K and Das, Samar (1998) Investigations on precipitation characteristics in a high strength low alloy (HSLA) steel. Scripta Materialia, 39 (2). pp. 235-259.

Misra, D D (1998) Control of Comminution Circuit for Efficient Froth Flotation. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Mitra, A and Palit Sagar, S and Chattoraj, I (1998) Crystallization and magnetic behaviour of Fe-Nb-Cu-Si-B alloys. Philosophical magazine b-physics of condensed matter statistical mechanics electronic optical and magnetic properties, 77 (6). pp. 1681-1691.

Mohanty, O N and Jha, G (1998) Corrosion Control through Surface Modification. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Mohanty, S P and Sahu, S K and Mohanty, I and Reddy, M L P and Chakravortty, V (1998) Extraction of uranium(VI) with binary mixture of LIX 984 and naphthenic acid. Solvent Extraction Research and Development, Japan, 5 . pp. 189-198.

Mukherjee, T K and Patra, R N (1998) Status of Waste Treatment in Titanium Mineral Industries. In: UNSPECIFIED.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Das, Goutam and Chattoraj, I and Das, S K and Bhattacharya, D K (1998) An investigation of the failure of low pressure steam turbine blades. Engineering Failure Analysis, 5 (3). pp. 181-193.

Murthy, K S N and Pugazhenthy, L (1998) Recent Technology and Market Trends in Galvanizing. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Narang, S K (1998) Industrial Metal Finishing for Corrosion Control. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Nguyen, Quang Chinh and Illy, Judit and Ca, To Duy (1998) Precipitation and GP-zone structures in AlZnMg (Cu, Zn) alloys. NML Technical Journal, 40 (2). pp. 45-49.

Padhi, K K (1998) Observation of x-ray interferences on apatite and secondary phosphate minerals in Sukulu phosphatic soil, Uganda. NML Technical Journal, 40 (2). pp. 63-68.

Padhi, K K (1998) X-ray fluorescence analysis of iron ore using de-jongh's algorithm. NML Technical Journal, 40 (4). pp. 115-122.

Pal, B C and Pillai, R M and Satyanarayana, K G (1998) Light Metal Matrix Composites - Present Status & Future Strategies. In: UNSPECIFIED.

Panda, P K and Mariappan, L and Kannan, T S (1998) Preparation of Al2O3 - SiC In-Situ Composite Powder Mixtures by Carbothermal Reduction of Kaolinite. In: UNSPECIFIED.

Pandey, A K and Debnath, K K and Setua, D K and Mathur, G N and Chandra, R (1998) Butyl Rubber-Nylon Composites with Improved Flame Retardancy & Gas Impermeability. In: UNSPECIFIED.

Pandey, J L and Banerjee, M K (1998) Concrete corrosion and control practices - an overview. Anti-corrosion methods and materials, 45 (1). 5 - .

Pandey, J L and Banerjee, M K (1998) Energy conservation with the use of solar selective coatings. Anti-corrosion methods and materials, 45 (1). 16- .

Pandey, J L and Rao, T B and Singh, S and Singh, S K (1998) Approaches to ISO certification - Paint manufacturing industry. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Pandey, P K and Dash, R R and Singh, M P (1998) Studies on the In-Situ Formation of AI2O3 - SiC Ceramic Matrix Composite from Tata Steel Colliery over Burden. In: UNSPECIFIED.

Parbat, R N (1998) Environmental and Waste management in Non-ferrous Metallurgical Industries - Critical issues. In: UNSPECIFIED.

Parida, N and Ravi Kumar, B and Bhattacharya, D M (1998) Fatigue damage assessment and detection of onset of crack initiation by x-ray diffraction. Transactions of the Indian Institute of Metals, 51 (2-3). pp. 175-177.

Pathak, L C and Mishra, Suman K and Srikanth, S (1998) Effect of Silver on the Sintering Characteristics of High T Ceramic Superconductors. In: Proceedings of Composite Materials, March, 1998, NML Jamshedpur, India.

Pathak, P N and Rafiuddin, S (1998) Recovery of barite from complex sulphide ores. Metals Materials and Processes, 10 (2). pp. 189-191.

Prabhakar, S and Bhaskar Raju, G (1998) Amenability of column flotation for lead-zinc beneficiation - A case study. Metals Materials and Processes, 10 (2). pp. 109-118.

Prabhakaram, P (1998) Organic Coatings-- Basic Considerations of Protections of Iron and Steel. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Pradhan, B and Chakraborty, D (1998) Delamination Initiation at the Interface of Broken & Continuous Plies In FRP Composite Laminates. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 206-213.

Pradhan, B and Kumar, N Venu and Rao, N S (1998) Modelling of Multiple Transverse Cracks In Angle - Ply Laminates. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 224-232.

Pradhan, J and Das, S N and Thakur, R S (1998) Use of activated Red Mud for removal of Phosphate and Selenite from Aqueous Solutions. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 155-162. ISBN 81-87053-28-7

Pradhan, S K and Dwarakadasa, E S (1998) Processing & Characterization of UHMWPE-CSP (Coconut Shell Powder) Composite. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 283-287.

Pradip, (1998) Process Optimization in Flotation Separation Plants. In: Workshop on Froth Flotation : Recent Trends, Septembe 22-24, 1998, RRL Bhubaneswar.

Prasad, B K and Venkateswarlu, K and Modi, O P and Jha, A K and Das, S and Dasgupta, R and Yegneswaran, A H (1998) Sliding wear behavior of some Al-Si alloys: Role of shape and size of Si particles and test conditions. Metallurgical and Materials Transactions A, 29 (11). pp. 2747-2752.

Prasad, S N and Navale, N G and Panda, S (1998) A Study on Impact Resistance of Glass Fibre Reinforced Vinylester Composites against ballistic Projectiles. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 246-253.

Prasad, Sanjay and Pandey, B D (1998) Alternative processes for treatment of chalcopyrite —A review. Minerals Engineering, 11 (8). pp. 763-781.

Prasad, V V S and Rao, A S and Prakash, U and Rao, V R and Rao, P K and Gupt, K M (1998) Alumina addition to fluoride slags for recycling of low oxygen high conductivity copper scrap through electroslag crucible melting. ISIJ International, 38 (12). pp. 1387-1389.

Prasad, V V S and Rao, A S and Prakash, U and Rao, Venkatesh and Rao, P K and Gupt, K M (1998) Effect of process variables on electroslag crucible melting of copper-chromium alloys. ISIJ International, 38 (12). pp. 1390-1392.

Prodhan, A and Sanyal, D (1998) Cooling curves analysis of aluminium solidified without and with magnetic or electric field. Journal of Materials Science Letters, 16 (11). pp. 958-961.

Puvvada, G V K and Yedavalli, B V S and Rao, A S (1998) Solvent extraction of gallium from Bayer Process liquor (Indal, Muri) using 7-alkyl-substituted-8-hydroxyquinoline (Kelex-100). Transactions of the Indian Institute of Metals, 51 (4). pp. 223-225.

Radhakrishna Bhat, B V and Somaraju, K and Venkataraman, B and Bhanuprasad, V V (1998) Metal Matrix Composites as Potential Armour Materials. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 103-115.

Rajeswari, S and Jayakumar, T and Rao, C B and Bhattacharya, D K and Raj, B (1998) Residual stress measurement in ferritic steel tube welds using X-ray diffraction. Science and technology of welding and joining, 3 (4). pp. 204-207.

Ram, S and Singh, T B and Pathak, L C (1998) Synthesis and thermogravimetric analysis of amorphous boehmite fibres. Physica Status Solidi A-applied research, 165 (1). pp. 151-164.

Ram, S and Singh, T B and Srikanth, S (1998) Thermal desorption process of water in amorphous AlO(OH)·αH2O fibres prepared by an electrochemical method. Materials Transactions, JIM, 39 (4). 485-491 .

Ramachandrarao, P and Srikanth, S (1998) Can there be a second kind of entropy catastrophe in the melting of metastable solids? Journal of Materials Research, 13 (11). pp. 3270-3274.

Ranganathan, S (1998) Interaction of the crucible material with liquid steel during vacuum deoxidation in a magnesium oxide crucible-comparison of a model with experiment. NML Technical Journal, 40 (1). pp. 29-34.

Ranganathan, S (1998) Thermochemical analysis of production of ferrochromium in submerged arc furnace. Ironmaking & Steelmaking, 25 (6). pp. 466-471.

Ranganathan, S and Godiwalla, K M (1998) Influence of pre-reduction of ore on the temperature profile inside a submerged-arc furnace producing ferro-chromium. Steel Research, 69 (12). pp. 476-481.

Rao, V V (1998) Prepararion of Al2O3 ceramic matrix in-situ composites by reactive melt penetration. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 132-136.

Ray, A C (1998) Sustainable technology through pollution prevention programme. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 87-91. ISBN 81-87053-28-7

Ray, Ajoy K and Mandal, S and Das, S K and Krishnan, C S S (1998) Low Cost In-Situ Formation of AIN - B- SiC. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 151-159.

Ray, Ashok K (1998) A new technique for precracking ceramic specimens in fatigue and fracture. Journal of the European Ceramic Society, 18 (12). pp. 1655-1662.

Ray, Ashok K and Tiwari, Y N and Sinha, A N and Sinha, R K and Singh, R and Chaudhuri, S (1998) Life prediction of service exposed reactor and distillation column materials used in a petrochemical industry. Engineering Failure Analysis, 5 (4). pp. 289-298.

Ray, B C and Hassan, S T and Clegg, D W (1998) Effects of Thermal Shock on Mechanical Behaviour of Kevlar Fibre Composites. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 214-223.

Reddy, M L P and Varma, R L and Ramamohan, T R and Sahu, S K and Chakravortty, V (1998) Cyanex 923 as an extractant for trivalent lanthanides and yttrium. Solvent Extraction and Ion Exchange, 16 (3). pp. 795-812.

Saha, A K (1998) Purification and enrichment of low grade molybdenite concentrates. NML Technical Journal, 40 (1). pp. 17-21.

Saha, A K and Khan, Z H (1998) Production of ferrite grade iron oxide from iron ore fines. NML Technical Journal, 40 (4). pp. 131-136.

Sahu, S K and Chakravortty, V (1998) Extraction of uranium(VI) with binary mixtures of a quadridentate Schiff base and various neutral donors. Journal of Radioanalytical and Nuclear Chemistry, 227 (1-2). pp. 163-165.

Sastri, S R S (1998) Column Flotation: Theory and Practice. In: Workshop on Froth Flotation:Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Sekhar, K C and Subramanian, S and Modak, J M and Natarajan, K A (1998) Removal of metal ions using an industrial biomass with reference to environmental control. International Journal of Mineral Processing, 53 (1-2). pp. 107-120.

Sengupta, B and Kumar, A and Hashim, M A and Ramakanth, C (1998) Nickel and chromium in wastewater - The Malaysian experience. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 27-51. ISBN 81-87053-28-7

Sharma, Manoj Kumar (1998) Initiatives in Environment Management undertaken by the Small Industries Development Bank of India. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 163-166. ISBN 81-87053-28-7

Sharma, S C and Girish, B M and Kamath, Rathnakar and Satish, B M (1998) An Evaluation of the sliding Wear Behaviour of SiC Particles Reinforced Copper Alloy Composite Materials. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 72-82.

Shukla, M K and Nigam, Vineeta and Singh, Harjeet and Setua, D K and Mathur, G N (1998) Lignin Reinforced Rubber Composites. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 233-245.

Sing, S B and Ray, S and Gupta, R K and Bhatnakar, N S (1998) Influence of Anisotropy on Creep in a Whisker Reinforced MMC Rotating Disc. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 83-102.

Singh, D D N (1998) Awareness of corrosion problems can save millions: Economical impact of corrosion inhibitors. Transactions of the indian institute of metals, 51 (5). pp. 291-301.

Singh, D D N (1998) Role of Concrete and Steel Surface on Performance of Structures. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Singh, D D N and Dey, A K and Dey, M and Singh, B K (1998) Corrosion characteristics of HSLA steels in sea water. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, D D N and Dey, A K and Khan, I (1998) Passivation of galvanized surfaces to improve their corrosion resistance. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India, .

Singh, D D N and Dey, M (1998) Chloride based bright zinc plating baths: A comparative evaluation. NML Technical Journal, 40 (1). pp. 1-10.

Singh, D D N and Gaur, B and Ghosh, Rita and Singh, B K (1998) Role of corrosion inhibitors or grain boundary corrosion control of Cr-Mn-Cu stainless steel in pickling solution. NML Technical Journal, 40 (3). pp. 77-86.

Singh, D D N and Gaur, B and Singh, B K and Ghosh, Rita (1998) Effective inhibition of corrosion of steel in phosphoric acid solution. NML Technical Journal, 40 (2). pp. 35-44.

Singh, D D N and Ghosh, Rita and Singh, B K (1998) Low Alloyed Thermo Mechanically Treated (TMT) Steel Rebars: An Ideal Solution for Reinforcement Corrosion. Steel in Construction, 1 (2). pp. 1-11.

Singh, D D N and Singh, B K (1998) Effect of mixed cations on phosphate coating of steel. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, Inder (1998) Atmospheric corrosion of 18 years study. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, Inder and Bhattamishra, A K (1998) Corrosion behaviour of magnesium alloys in chloride medium. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, Inder and Mukherjee, A N (1998) Corrosion of tinned sheets during transportation - A case study. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, Inder and Mukherjee, A N (1998) Corrosion of Tinned Sheets during Transportation-A Case Study. In: Proceedings of International Conference on Corrosion CORON-97 Nehru Centre, Mumbai, India, 3-6, December, 1997, NML, Jamshedpur.

Singh, M N and Singh, Inder (1998) High temperature resistant slurry based coating for steel. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, Raghuvir and Singh, M N (1998) Tape coatings: A review. NML Technical Journal, 40 (4). pp. 123-129.

Singh, Ratnakar (1998) Development of Flotation Reagents with Chelating Functional Groups. In: Workshop on Froth Flotation : Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Singh, S R (1998) Characterization of Corrosion Related Failures. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Singh, T B (1998) Protective Nature of the Surface film Formed on the Weathering Steel. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Singh, T B and Lal, Kishori and Mohanty, R K (1998) Corrosion behaviour of rapidly solidified lead-aluminium alloys for battery grids. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Sinha, P K (1998) Modern Composites - A Renascent Material System. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 1-8.

Sinha, S N and Agrawal, M K and Saha, R K (1998) Pollution and its Control in Copper Industry. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 185-196. ISBN 81-87053-28-7

Sivaramakrishnan, C S and Choudhuri, S P (1998) Role of Thermomechanical Treatments on Mechanical Prope-rties, Microstrucures and Corrosion Properties of Micro-alloyed Steels. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Srikanth, S and Ramachandrarao, P (1998) Construction and application of metastability field diagrams for non-equilibrium processing of alloys. International Journal of Non-equilibrium processing, 10 (3-4). pp. 219-239.

Subramanian, C and Suri, A K (1998) Recovery of Niobium and Tantalum from Low Grade Tin Slag - A Hydrometallurgical Approach. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 100-107. ISBN 81-87053-28-7

Subramanian, S and Lahiri, A K (1998) Process Engineering for Pollution Control and Waste Minimisation in Non -Ferrous Metallurgical Industries. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 17-26. ISBN 81-87053-28-7

Tripathy, P K and Shah, V D and Rakhasia, R H and Sehra, J C (1998) Environmental considerations in the selection of metallurgical processes for the extraction of molybdenum from low grade molybdenite concentrate. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 92-99. ISBN 81-87053-28-7

Vaish, A K and Humane, M M and Chakrabarty, A K and Ramachandrarao, P (1998) Direct current transferred arc plasma reactor-Its suitability for smelting reduction and refining processes. NML Technical Journal, 40 (3). pp. 95-108.

Vaish, A K and Singh, S D and Ghosh, S B and Singh, O and Bhattacharyya, A P and Maharaj, L and Ramachandrarao, P (1998) A Comprehensive pollution control system for the mitigation of fine particulates of lead and Sox gases from secondary lead smelters. In: Environmental & waste management: in non-ferrous metallurgical industries. NML, Jamshedpur, pp. 225-229. ISBN 0971-9407

Viswanathan, M (1998) Integrated Pollution Control and Waste Management in Copper Base Processing Industries. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 67-78. ISBN 81-87053-28-7

Viswanathan, P V and Sankaran, C (1998) An Overview of environmental issues and protection measures in Indian non-ferrous plants. In: Environmental & waste management: in non-ferrous metallurgical industries. NML, Jamshedpur, pp. 197-208. ISBN 0971-9407

Yadav, P N S (1998) A study of passive behaviour of aluminium electrode in ethylenediamine. NML Technical Journal, 40 (1). pp. 11-15.