Items where Subject is "Metallurgy > Alloys and Compounds"
Group by: Creators | Item Type
Number of items at this level: 35.
Bahadur, Aruna and Maji, K D and Kumar, Rajendra (1975) Analysis of alloys and salt solutions by β-ray backscattering. Journal of Applied Chemistry and Biotechnology, 25 (7). pp. 515-522.
Barman, S R and Chakrabarti, Aparna and Singh, Sanjay and Banik, S and Bhardwaj, S and Paulose, P L and Chalke, B A and Panda, A K and Mitra, A and Awasthi, A M (2008) Theoretical prediction and experimental study of a ferromagnetic shape memory alloy: Ga2MnNi. Physical Review B (PRB), 78 (13). pp. 1-6.
Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2004) The Kinetics of Reduction of Iron in Indian Chromite Ores by Carbon. Metals Materials and Processes, 16 (2-3). pp. 199-208.
Chandan, A K and Tripathy, S and Ghosh, M and Ghosh Chowdhury, S (2019) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature. Metallurgical and Materials Transactions A, 50(11) (IF-1.985). pp. 5079-5090.
Das, Arpan and Das, S K and Sivaprasad, S and Tarafder, S (2008) Fracture-property correlation in copper-strengthened high-strength low-alloy steel. Scripta Materialia, 59 (7). pp. 681-683.
Dev, S C and Sivaramakrishnan, C S (1996) An indigenous technology for a silver brazing alloy. Materials & Design, 17 (2). pp. 75-78.
Ghosh Chowdhury, S (2005) Development of texture during cold rolling in AA5182 alloy. Scripta Materialia, 52 (2). pp. 99-105.
Ghosh Chowdhury, S and Mondal, Amit and Gubicza, Jeno and Krallics, Gyorgy and Fodor, Arpad (2008) Evolution of microstructure and texture in an ultrafine-grained Al6082 alloy during severe plastic deformation. Materials Science and Engineering A, 490 (1-2). pp. 335-342.
Kailath, A J and Kumar, Arvind and Mitra, A (2006) Effect of metalloids on crystallization and magnetic behaviour of FeCoSiB based metallic glass. Bulletin of Material Science, 29 (2). pp. 127-131.
Kailath, A J and Mandal, Soumen (2012) The effect of Sn addition on the crystallization and thermal stability of Cu–Zr–Ti metallic glasses. Journal of Alloys and Compounds, 537 . pp. 275-279.
Kumar, Rajendra (1975) NML-PM2 conductor-A versatile alloy aluminium conductor-why and for whom? NML Technical Journal, 17 (3-4). pp. 13-34.
Madge, S V and Louzguine, D V and Lewandowski, J J and Greer , A L (2012) Toughness, extrinsic eﬀects and Poisson’s ratio of bulk metallic glasses. Acta Materialia, 60 . pp. 4800-4809.
Murugaiyan, Premkumar and Bedanta, Subhankar and Jena, S K and Panda, A K and Mitra, A and Bysakh, S and Roy, Rajat K (2020) Crystallization and magnetic hardening behaviour of Fe-rich FeSiBNb(Cu) melt-spun alloys. Journal of Magnetism and Magnetic Materials, 502 (IF-2.683). p. 166528.
Nair, G G and Bhandary, V S and Gupte, P K (1966) Melting and alloying practice in aluminium and its alloys. NML Technical Journal, 8 (3). pp. 19-28.
Panda, A K and Ghosh Chowdhury, S and Mitra, A and Nishiyama, N (2006) Electron transport behaviour and soft magnetic properties of bulk amorphous Fe72Si4B20Nb4 alloy. Journal of Physics D: Applied Physics, 39 . pp. 3536-3542.
Panda, A K and Mohanta, Ojaswini and Kumar, A and Ghosh, M and Mitra, A (2007) A Potential Co36Fe36Si4B20Nb4 nanocrystalline alloy for high temperature soft magnetic applications. Philosophical Magazine, 87 (11). pp. 1671-1682.
Pathak, B C and Kumar, Arvind and Sahoo, K L and Talukdar, P (2006) Effect of Ni–Mg on the microstructure and properties of Al–(4–5)Fe–1V–1Si alloys. Materials Science and Engineering A, 433 (1-2). pp. 310-315.
Raghavan, S and Singh, Gaurav and Sondhi, Sanjay and Srikanth, S (2012) Construction of a pseudo-binaryphasediagram for multi-componentNi-base superalloys. Calphad, 38 . pp. 85-91.
Rai, R K and Sahu, J K and Paulose, N and Fernando, D.C (2021) Tensile deformation micro-mechanisms of a polycrystalline nickel base superalloy: From jerky flow to softening. Materials Science and Engineering A, 807 .
Rai, R K and Sahu, J K and Pramanick, A K and Paulose, N and Fernando, D.C and Das, S K (2019) Creep deformation micro-mechanisms of CM 247 DS LC Ni-base superalloy under relevant service condition. Materials Characterization, 150 . pp. 155-165.
Rajini Kanth, B and Ramarao, N V and Panda, A K and Gopalan, R and Mitra, A and Mukhopadhyay, P K (2010) Effect of annealing on the martensitic transformation of a CoNiAl ferromagnetic shape memory alloy. Journal of Alloys and Compounds, 491 (1-2). pp. 22-25.
Ray, Ashok K and Das, D K and Venkataraman, B and Roy , P K and Goswami, B and Roy, Nilima and Das, S K and Parida, N and Tarafder, S and Chaudhuri, S and Sahay, S K and Ghosh, R N (2005) Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners. Materials Science and Engineering A, 405 (1-2). pp. 194-200.
Ray, Ashok K and Dwarakadasa, E S and Das, D K and Ranganath, V R and Goswami, B and Sahu, J K and Whittenberger, J D (2007) Fatigue behavior of a thermal barrier coated superalloy at 800°C. Materials Science and Engineering A, 448 (1-2). pp. 294-298.
Roy, Ajoy K and Mandhyan, A K and Sahoo, K L and Banhart, J and Chattoraj, I (2009) Electrochemical response of amorphous and devitrified Al-Ni-La-X (X = Ag, Cu) alloys. Materials and Corrosion / Werkstoffe und Korrosion, 60 (6). pp. 431-437.
Sahoo, K L and Poddar, Palash (2017) Studies on Magnesium Alloys–Properties and Potential for Automotive and Aerospace Applications. Transaction of 65th Indian foundry Congress 2017 . pp. 151-156.
Sharma, T L and Trehan, Y N (1976) Integral colour anodizing of aluminium and aluminium alloys. NML Technical Journal, 18 (3). pp. 54-61.
Sharma, T L and Trehan, Y N (1980) Integral colour anodizing of aluminium and aluminium alloys in molybdate containing acidic baths. NML Technical Journal, 22 (1-2). pp. 9-19.
Shibe, Vineet and Chawla, Vikas (2017) Enhancement in wear resistance by depositing Fe-C-Cr based hardfacing alloys on ASTM A36 steel. Journal of Metallurgy and Materials Science, 59(1) . pp. 1-9.
Singh, R K and Sahu, J K (2019) Yield strength anomaly and dynamic strain ageing behaviour of recently developed advanced ultra-supercritical boiler grade wrought Ni-based superalloy IN 740H. Materials at High Temperatures, 36(3) . pp. 220-231.
Srivastava, V C and Mandal, R K and Ojha, S N (2004) Evolution of microstructure in spray formed Al–18%Si alloy. Materials Science and Engineering A, 383 (1). pp. 14-20.
Tripathy, S and Gupta, G and Ghosh Chowdhury, S (2018) High Entropy Alloys: Criteria for Stable Structure. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49A/1 (IF- 1.874). pp. 7-17.
Book or NML Publication
UNSPECIFIED (2011) Frontiers in Mechanochemistry and Mechanical Alloying. In: Kumar, Rakesh and Srinivasan, Srikanth and Mehrotra, Surya Pratap, (eds.) Frontiers in Mechanochemistry and Mechanical Alloying. CSIR-National Metallurgical Laboratory, Jamshedpur, pp. 1-334. ISBN 97881-87053-69-8
Conference or Workshop Item
Macgregor, R A (1953) Failures of Steel Parts in Service. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur.
Sahu, K C (1999) Characterization and utilisation of fly ash. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.
Upadhyay, Divyesh (2011) Microstructural analysis of 7075-Aluminium alloy. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)