Items where Subject is "Metallurgy > Alloys and Compounds > Iron Alloys"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | J | K | M | N | P | R | S
Number of items at this level: 20.


Arora, S M and Bhatnagar, S S and Gupte, P K and Nijhawan, B R (1964) Development of Iron -Aluminum Alloys. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.


Jana, R K and Randhawa, N S and Agarwal, Sanjay (2008) Making standard grade FeSiMn alloy by blending of different low grade materials. In: National Metallurgist Day - Annual Technical Meeting (NMD-ATM), 12-15 November 2008, New Delhi.

Jana, R K and Randhawa, N S and Agarwal, Sanjay and Maity, S K and Ghorai, S (2008) Two stage smelting process for recovery of manganese from low manganese bearing material. In: 12th Int. Sem. Nonferrous Metals – 2008, 4-5 July, 2008, Nagpur.


Krishnan, A A and Prakash, Ved and Contractor, G P (1953) Study of the system Iron-Manganese-Aluminium and its alloys. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.


Mehta, M I and Kashyap, B P and Singh, R K P (2016) Study on flow properties of rotor grade steel. Journal of Metallurgy and Materials Science, 58(4) (IF- 0.04). pp. 221-229.

Mohanta, Ojaswini (2011) Development of Co-Fe Based Nanostructured Soft Magnetic Materials for High Temperature Applications. PhD thesis, Bengal Engineering and Science University, Shibpur, Howrah.


Nijhawan, B R (1966) Feasibility Project Report for a Foundry Pig Iron Plant employing low temperature Carbonized Coke (KOLSIT). Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

Nivas, R and Das, Goutam and Das, S K and Mahato, B and Kumar, Sanjay and Sivaprasad, K and Singh, P K and Ghosh, M (2017) Effect of Stress Relief Annealing on Microstructure & Mechanical Properties of Welded Joints Between Low Alloy Carbon Steel and Stainless Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 48 A(1) (IF-1.874). pp. 230-245.


Pal, J and Ghorai, S and Ammasi, A and Hota, S K and Koranne, V M and Venugopalan, T (2017) Improving reductibility of iron ore pellets by optimization of physical parameters. Journal of Mining and Metallurgy Section B- Metallurgy, 53(1) (IF-0.804). pp. 37-46.

Panda, A K and Mitra, A (2007) Deformation Behaviour Study of Micro-alloyed Steel by Magnetic Hysteresis Techniques. In: International Conference on Microalloying: Emerging Trends (Mcroalloying-2007, 9-11 March, 2007, Bengal engineering college and science , Howrah.


Rajnikanth, V and Munda, Parikshit and Mandal, D and Minj, R K and Das, Swapan K and Ghosh Chowdhury, S and Singh, S R (2009) Development and Evaluation of Wear Resistant Material. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Randhawa, N S and Jana, R K (2013) Different applications of waste generated in reduction roasting – ammonia leaching of manganese nodules. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2013, 12-15 November 2013, IIT-BHU, Varanasi.

Randhawa, N S and Jana, R K and Das, N N (2012) Manganese Nodules Residue: Potential Raw Material for FeSiMn Production. International Journal of Metallurgical Engineering, 1(2) . pp. 22-27.

Randhawa, N S and Jana, R K and Das, N N (2012) Silicomanganese production utilising low grade manganese nodules leaching residue. Mineral Processing and Extractive Metallurgy (Trans. IMM C) (0.667). pp. 1-9.

Randhawa, N S and Jana, R K and Das, N N (2012) Thermodynamics and Viscosity Aspects in Manganese Nodule Residue Smelting for Silicomanganese Production. International journal of Metallurgical Engineering, 1(5) . pp. 88-95.

Ranganathan, S (1996) The technique of successive partial equilibria to predict precipitation of carbides in equilibrium with a solution phase. Calphad, 20 (4). pp. 461-470.

Ravi Kumar, B and Patel, N K and Mukherjee, K and Walunj, Mahesh and Mandal, G K and Venugopalan, T (2017) Ferrite channel effect on ductility and strain hardenability of ultra high strength dual phase steel. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 685 (IF-3.094). pp. 187-193.

Roy, Rajat K and Murugaiyan, Premkumar and Bansal, G K and Krishna, K Gopala and Panda, Ashis K (2023) Structural and magnetic behaviors of Fe‑based glassy alloys prepared by industrial raw materials and different processing routes. Journal of Materials Science: Materials in Electronics, 34 (2.8). p. 2218.


Singh, Raghuvir and Gaur, B and Singh, A K (2001) Impact of Filtrate Recycling on Corrosion of Stainless Steels in Hypochlorite Solutions. Journal of Electrochemical Society of India, 50 (1). pp. 21-26.

Sinha, A N and Balasundaram, L J (1965) Curie Temperature of Iron alloys. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

This list was generated on Wed Feb 21 21:09:02 2024 IST.