Items where Division is "Material Science and Technology" and Year is 1996

B

Bahadur, Aruna (1996) Aluminum coatings for steel. Materials and Manufacturing Processes, 11 (2). pp. 225-232.

Bahadur, Aruna (1996) Low chromate corrosion inhibitor with borate and hexametaphosphate. Materials Transactions JIM, 37 (4). pp. 605-611.

Bodas, M G and Dash, D R and Sivaramakrishnan, C S (1996) Oxidation of iron powder in a fluidized bed reactor. Materials & Design, 17 (3). pp. 167-172.

C

Chattopadhyay, Lalitha (1996) Size effect on crack-tip creep. Engineering Fracture Mechanics, 53 (2). pp. 309-310.

Chattopadhyay, Lalitha (1996) Size effect on creep energy dissipation during stable crack growth. Engineering Fracture Mechanics, 54 (6). pp. 897-899.

Chattopadhyay, Lalitha and Ghosh, R N (1996) Clip: Computer software for creep life prediction of engineering materials. Engineering Fracture Mechanics, 54 (1). pp. 71-73.

Chattopadhyay, S and Chattopadhyay, Lalitha and Banerjee, S (1996) The K-calibration and standardization of ceramic specimen. Engineering Fracture Mechanics, 54 (1). pp. 167-169.

Chattoraj, I and Mitra, A (1996) Micromagnetic studies on hydrogenated steel. In: Trends in NDE science and technology - Proceedings of the 14th world conference on NDT, 1996, 14th WCNDT.

D

Das, Swapan K and Mitra, A and Daspoddar, P K (1996) Thermal analysis of hydrated calcium aluminates. Journal of Thermal Analysis, 47 (3). pp. 765-774.

Dev, S C and Sivaramakrishnan, C S (1996) An indigenous technology for a silver brazing alloy. Materials & Design, 17 (2). pp. 75-78.

Dubey, K S and Ramachandrarao, P and Lee, S (1996) Thermodynamic and viscous behaviour of undercooled liquids. Thermochimica Acta, 280-281 . pp. 25-62.

K

Kumar, P and Prakash, R (1996) Quality assessment of class fibre composites by acousto ultrasonic technique. In: Trends in NDE science and technology - Proceedings of the 14th world conference on NDT, 1996, 14th WCNDT.

M

Mitra, A and Ravi Kumar, B and Mukhopadhyay, N K and Murthy, G V S and Das, Swapan K and Bhattacharya, D K (1996) Residual stress evaluation in service exposed shot peened spring by micromagnetic and XRD techniques. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 879-882.

Mitra, A and Sipahi, L B and Govindaraju, M R and Jiles, D C and Ramanan, V R V (1996) Effects of tensile stress on magnetic Barkhausen emissions in amorphous Fe-Si-B alloy. Journal of Magnetism and Magnetic Materials, 153 (1-2). pp. 231-234.

Murthy, D S R and Prasad, P M (1996) Leaching of gold and silver from Miller Process dross through non-cyanide leachants. Hydrometallurgy, 42 (1). pp. 27-33.

P

Parida, N and Ravi Kumar, B and Das, Goutam and Murthy, S G N and Bhattacharya, D K (1996) Monitoring the hydrotesting of a new pressure vessel by means of acoustic emission. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 2423-2426.

Prasad, Sanjay and Pandey, B D and Palit, S K (1996) Sulphation of chalcopyrite with steam and oxygen in the presence of some additives. Materials Transactions JIM, 37 (6). pp. 1304-1310.

R

Ram, S and Halder, S (1996) Medium-range structural ordering and macroscopic interactions in 1 to 2 mm thin two-dimensional platelets of borate glasses. Physica status solidi b-basic research, 195 (2). pp. 343-351.

Rao, Ch. Sridhar (1996) Titanium as an Automotive Material. NML Technical Journal, 38 (2). pp. 43-50.

Ray, Ajoy K and Bhattacharya, D K and Das, Goutam (1996) Acoustic emission studies during indentation on ceramic and ceramic composite. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 2455-2458.

Ray, Ashok K and Fuller, E R and Banerjee, S (1996) Fatigue crack growth rate and fracture toughness of 25 wt% silicon carbide whisker reinforced alumina composite with residual porosity. Journal of the European Ceramic Society, 16 (5). pp. 503-513.

S

Sharma, S C and Girish, B M and Kulkarni, R S and Kamath, R (1996) Machinability of zinc alloy based particulate metal matrix composites. NML Technical Journal, 38 (3). pp. 107-111.

Sharma, S C and Girish, B M and Ramachandrarao, P (1996) Tribological properties of zinc alloy based composites for bearing applications. NML Technical Journal, 38 (2). pp. 73-76.

T

Tarafder, S and Tarafder, Mita and Ranganath, V R (1996) Fracture mechanics expressions for the standard chord-supported arc bend specimen. Journal of Testing and Evaluation, 24 (2). pp. 73-79.

V

Venkateswarlu, K (1996) Influence of the size and morphology of silicon particles on the physical, mechanical and tribological properties of some aluminium - silicon alloys. Material Science letters, 15 . pp. 1773-1776.

Verma, A K and Sharma, S and Ghosh, K S (1996) Ceramics for Automobile Industries. NML Technical Journal, 38 (2). pp. 63-72.