Items where Year is 1999

B

Bahadur, Aruna (1999) Role of X-ray diffraction in evaluating component integrity. In: Marerials Caracrerizarion Techniques-Principles amd applications, 1999, NML-Jamshedpur.

Balasubramaniam, R (1999) Delhi iron pillar rust characterization by x-ray diffraction analysis. NML Technical Journal, 40 (1). pp. 12-20.

Bandopadhyay, A and Kumar , Sanjay and Das, S K and Singh, K K (1999) In the Pursuit of Waste free Metallurgy. NML Technical Journal, 41 (4). pp. 143-162.

Bhagat, R P (1999) Factors affecting return sinter fines regimed and strand productivity in iron ore sintering. ISIJ International, 39 (9). pp. 889-895.

Bhagat, R P (1999) Kinetics of sodium dodecyl benzene sulfonate adsorption on hematite. Scandinavian Journal of Metallurgy, 28 (4). pp. 156-161.

Bhagat, R P (1999) Replacement of coke breeze by Leco-fines from Neyveli in iron ore sintering. Transactions of the indian institute of metals, 52 (5). pp. 299-304.

Bhagat, R P and Dey, Shobhana (1999) Flocculation of iron ore slimes from Joda and Kiriburu mines. Indian journal of chemical technology, 6 (5). pp. 280-284.

Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Sankaran, C (1999) Beneficiation of Gold Ore by Flotation Column: A Pilot Scale Study. In: Beneficiation, agglomeration and environment, 20-22 January 1999, Bhubaneswar.

Bhattacharjee, S and Bhattacharyya, G and Dasgupta, P and Mitra, A (1999) Amendment of flyash by vermitechnology for agricultural application. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Bhattacharya, D K (1999) Magnetic NDT for the characterization of industrial materials. In: UNSPECIFIED.

Biswas, D K and Singh, S D and Mishra, K K and Ramachandrarao, P (1999) Pollution free operation of foundry industries. NML Technical Journal, 40 (2). pp. 43-56.

Biswas, P K and Dev, S C and Godiwalla, K M and Sivaramakrishnan, C S (1999) Effect of some design parameters on the suspension characteristics of a mechanically agitated sand–water slurry system. Materials & Design, 20 (5). pp. 253-265.

Bose, A K (1999) Drying behaviour of alumina gel. NML Technical Journal, 40 (1). pp. 37-41.

C

Chattoraj, I and Rao, K R M and Das, Swapan K and Mitra, A (1999) Anodic reactions of amorphous and devitrified Fe–B–Si–Nb–Cu alloys in buffered chloride and fluoride. Corrosion Science, 41 (1). pp. 1-16.

Chaudhary, P N (1999) Dephosphorization of high carbon ferromanganese using BaCO3 based fluxes. PhD thesis, Indian Institute of Technology.

Chvoj, Z and Srikanth, S and Ramachandrarao, P (1999) Thermodynamic limits and kinetic probabilities during homogeneous nucleation in liquid Ag-Cu alloys. Journal of non-equilibrium thermodynamics, 24 (4). pp. 360-371.

D

Das, Goutam (1999) Image analysis in quantitative metallography. In: UNSPECIFIED.

Das, Goutam and Sinha, A N and Mishra, Suman K and Bhattacharya, D K (1999) Failure analysis of counter shafts of a centrifugal pump. Engineering Failure Analysis, 6 (4). pp. 267-276.

Das, P K and Mishra, D and Anand, S and Das, R P (1999) Reduction of Mn(IV)oxide by (NH4)2 SO3 in the presence of metal ions in ammoniacal medium. Hydrometallurgy, 52 . pp. 91-104.

Das, Samar (1999) Metallographic sample preparation techniques. In: UNSPECIFIED.

Das, Suchandan K (1999) Quantum mechanistic isomorphism of transient nucleation during rapid solidification processes. Transactions of the Indian Institute of Metals, 52 (4). pp. 205-210.

Das, Suchandan K (1999) Simulation of free boundary problem in electromagnetic levitation melting of metals in cold crucibles. Transactions of the Indian Institute of Metals, 52 (4). pp. 197-203.

Das, Suchandan K (1999) Thermal modelling of DC continuous casting including submould boiling heat transfer. Applied Thermal Engineering, 19 (8). pp. 897-916.

Dasgupta, S S (1999) Studies on Kolaghat Thermal Power Station fly ash with a view to set up a mechanised brick plant. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Dighade, R R and Ambekar, S V and Pande, A M (1999) Flyash lime gypsum bricks - A boon for Vidarbha region. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Director, NML (1999) Annual Report 1998-1999. NML, Jamshedpur.

G

Ghosh Chowdhury, S (1999) X-ray diffraction: principles and its application to structural analysis. In: UNSPECIFIED.

Godiwalla, K M and Das, Suchandan K and Sivaramakrishnan, C S (1999) Mathematical modelling of electromagnetic phenomenon in aluminium smelting cells. Transactions of the Indian Institute of Metals, 52 (2-3). pp. 103-108.

Gopal, S R and Sharma, C M (1999) Use of fly ash as building materials. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Goswami, M C (1999) On the strength and reduction characteristics of fluxed composite iron ore pellets. NML Technical Journal, 40 (4). pp. 163-170.

Goswami, M C and Prakash, S (1999) Smelting Reduction Kinetics of Fluxed Composite Reduced Iron Pellets(FCIP). Tool & Alloy Steels, 32 ( ). pp. 11-19.

Goswami, M C and Prakash, S and Sarkar, S B (1999) Kinetics of smelting reduction of fluxed composite iron ore pellets. Steel Research, 70 (2). pp. 41-46.

Gupta, K K and Ghosh, Dolly and Bhagat, A N and Hait, Jhumki and Chakravarty, S and Ranganathan, S (1999) Determination of carbidic carbon in steels. Talanta, 49 (1). pp. 41-45.

Guru Vittal, U K and Kumar, Sanjay (1999) Use of fly ash admixed concrete for pavement construction*. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Guru Vittal, U K and Murty, A V R S and Kumar, Sanjay (1999) Use of fly ash admixed concrete for pavement construction. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

J

Jain, Pankaj K and Sahu, M N and Raju, C B (1999) Coating of alumina on ceno-spheres of fly-ash. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Jana, R K and Pandey, B D and Premchand, (1999) Ammoniacal leaching of roast reduced deep-sea manganese nodules. Hydrometallurgy, 53 (1). pp. 45-56.

Jana, R K and Srikanth, S and Pandey, B D and Kumar, Vinay and Premchand, (1999) Processing of Deep-Sea Manganese Nodules at NML for Recovery of Copper, Nickel & Cobalt. Metals Materials and Processes, 11 (2). pp. 133-144.

K

Kale, Girish Madhav and Srikanth, S (1999) Electrochemical determination of the activity of Na2O in the pyrochlore phase of the Sb2O4-NaSbO3 system. Journal of the American Ceramic Society, 82 (8). pp. 2161-2165.

Karandikar, M V and Lele, P G and Khadilkar, S A (1999) Enhancement of reactivity and increased usage of low lime class -F-fly ash-possible avenues. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Khalid, M and Mehrotra, S P and Verma, C L (1999) Performance of fly ash based multicomponent blended cements. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Kumar, Rakesh (1999) Anomalous dependence of leachability on surface area during sulphuric acid leaching of nickel- and copper-doped birnessites. Hydrometallurgy, 52 (1). pp. 71-79.

Kumar, Ramesh A V and Balasubramaniam, R (1999) Delhi iron pillar rust characterization by fourier transform infrared spectroscopy analysis. NML Technical Journal, 40 (1). pp. 31-36.

Kumar, Ramesh A V and Balasubramaniam, R (1999) Delhi iron pillar rust characterization by mossbauer spectroscopy analysis. NML Technical Journal, 40 (2). pp. 57-61.

Kumar, S and Jain, A K (1999) Environmental evaluation of coal ash on soil behaviour - A case study of Chandrapura thermal power station. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Kumar, Sanjay and Das, U S and Singh, K K (1999) Sintering studies on fly ash and clay mixes. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Kumar, Vinay and Jha, C N (1999) Fly ash for high value added applications. In: Proceedings of the National Seminar on Fly Ash Utilisations, February 26-27, 1999, NML Jamshedpur, India.

M

Maitra, S (1999) Ceramic products from fly ash Global perspectives. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Malaviya, S K and Chatterjee, B and Singh, K K (1999) Fly ash - An emerging alternative building material. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Mathur, A K (1999) Ash utilization in National Thermal Power Corporation. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Mehta, K D and Pandey, B D and Premchand, (1999) Bio-assisted leaching of copper, nickel and cobalt from copper converter slag. Materials Transactions JIM, 40 (3). pp. 214-221.

Mishra, S C and Mishra, P C and Rout , K C and Anantapadmanabahn, P V (1999) Fly ash as a coating material for plasma spray coatings. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Mishra, Suman K and Das, Swapan K and Ray, Ajoy K and Ramachandrarao, P (1999) Effect of nickel on sintering of self-propagating high-temperature synthesis produced titanium carbide. Journal of Materials Research, 14 (9). pp. 3594-3598.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Sinha, R K and Bhattacharya, D K and Chaudhuri, S (1999) Remaining life estimation of a service exposed economiser tube. Engineering Failure Analysis, 6 (4). pp. 233-243.

Mukhopadhyay, N K and Sridhar, G and Parida, N and Tarafder, S and Ranganath, V R (1999) Hydrogen embrittlement failure of hot dip galvanised high tensile wires. Engineering Failure Analysis, 6 (4). pp. 253-265.

Mukhopadhyay, S (1999) Relaxation effects on thermally induced vibrations in a generalized thermoviscoelastic medium with a spherical cavity. Journal of thermal stresses, 22 (9). pp. 829-840.

Murthy, D S R and Narasimha Rao, D L (1999) Fly ash and its use in cementitious material in civil engineering. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Murthy, G V S and Ray, Ashok K and Minj, R K and Mukhopadhyay, N K (1999) Microhardness and Fracture Toughness Studies of Decagonal Quasicrystal in Al-Cu-Co System. Journal of Materials Science Letters, 18 (3). pp. 255-258.

Murty, B S and Kori, S A and Venkateswarlu, K and Bhat, R R and Chakraborty, M (1999) Manufacture of Al–Ti–B master alloys by the reaction of complex halide salts with molten aluminium. Journal of Materials Processing Technology, 89-90 . pp. 152-158.

N

Narang, S K (1999) Coating, plating and paints developed in NML. In: National Seminar on coating, plating and paints, November, 1999, Koraput.

Narang, S K and Mukherjee, A N (1999) Cathodic protection: introduction and recent developments. In: The 111th Asian-Pacific corrosion control conference, 1999, Vietnam.

P

Palit Sagar, S and Chattoraj, I and Mitra, A (1999) The generation of magnetic bistability in annealed Fe-Si-B fibre by hydrogenation. Journal of Physics D-Applied Physics , 32 (5). pp. 541-545.

Parida, K M and Mishra, T and Das, D (1999) Thermal transformation of trinuclear FeIII/ acetato complex intercalated montmorillonite. Applied Clay Science, 15 . pp. 463-475.

Parida, N (1999) Non-destructive testing and evaluation of cast materials. In: UNSPECIFIED.

Parida, N and Sivaprasad, S and Tarafder, S and Ranganath, V R and Bhattacharya, D K (1999) Acoustic emission: A novel technique for the study of fracture micro-mechanisms. Journal of non destructive evaluation, 19 (3). pp. 51-55.

Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (1999) Degradation of BPSCCO superconductors during processing. Journal of Materials Science, 34 (7). pp. 1619-1624.

Pathak, L C and Mishra, Suman K and Bhattacharyya, D and Chopra, K L (1999) Sintering characteristics of Y-Ba-Cu-oxide-Ag-x superconductors. Journal of Materials Research, 14 (11). pp. 4148-4156.

Pathak, L C and Ray, Ashok K and Das, Samar (1999) Carbothermal synthesis of nanocrystalline aluminum nitride powders. Journal of the American Ceramic Society, 82 (1). pp. 257-260.

Peter, J A and Neelamegam, M and Dattatreya, J K and Rajamane, N P (1999) Utilisation of flyash as cement replacement material to produce high performance concrete. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Poonawala, N S and Chakrabarti, A K and Prodhan, A (1999) Influence of minor additions of nitrogen and titanium on the carbide morphology and transformations in chromium cast irons. Transactions of the Indian Institute of Metals, 52 (4). pp. 245-250.

Prasad, Sanjay and Pandey, B D (1999) Alternative processes for treatment of chalcopyrite - a review. Minerals Engineering, 12 (2). p. 235.

Prasad, Sanjay and Pandey, B D (1999) Sulphation roasting studies on synthetic copper–iron sulphides with steam and oxygen. Canadian Metallurgical Quarterly, 38 (4). pp. 237-247.

Prasad, Sanjay and Pandey, B D (1999) Thermoanalytical Studies on Copper—Iron Sulphides. Journal of Thermal Analysis and Calorimetry, 58 (3). pp. 625-637.

Premchand, and Jana, R K (1999) Processing of polymetallic sea nodules: An overview. In: Proceedings of the third (1999) ISOPE ocean mining symposium, Nov 08-10, 1999, Goa, India.

Puvvada, G V K (1999) Liquid-liquid extraction of gallium from Bayer process liquor using Kelex 100 in the presence of surfactants. Hydrometallurgy , 52 (1). pp. 9-19.

Puvvada, G V K (1999) Liquid–liquid extraction of gallium from Bayer process liquor using Kelex 100 in the presence of surfactants. Hydrometallurgy, 52 (1). pp. 9-19.

Puvvada, G V K and Srikanth, S (1999) Recycling of tungsten based heavy alloy scrap. NML Technical Journal, 40 (1). pp. 21-29.

R

Ramachandrarao, P (1999) Phase Diagrams. In: Proceedings of the workshop on Materials Characterization Techniques - Principles and Applications , January 19-20,1999, NML.

Ranganathan, S (1999) A technique for prediction of carbonitride precipitation in high strength low alloy steels. Materials science and technology , 15 (5). pp. 523-526.

Ranganathan, S and Sen, P K and Mishra, S N and Mishra, R (1999) Application of thermo-chemical analysis to control the recovery of silicon during the production of ferro-chromium in submerged-arc furnace. Icarism '99: proceedings of the international conference on alternative routes of iron and steelmaking, 99 (3). pp. 277-279.

Rao, A S and Prasad, V V S and Baligidad, R G and Rao, V R and Sarma, D S (1999) Influence of hot working on electro slag remelted low alloy steel. Transactions of Indian Institute of Metals, 52 (2-3). pp. 139-146.

Rao, V V (1999) Microstructure and properties of high strength aluminium alloys subjected to rapid solidification processing. Indian Journal of Engineering and Materials sciences, 6 (3). pp. 158-163.

Rath, C and Sahu, K K and Kulkarni, S D and Anand, S and Date, S K and Das, R P and Mitra, N C (1999) Microstructure-dependent coercivity in monodispersed hematite particles. Applied Physics Letters, 75 (26). pp. 4171-4173.

Ray, Ashok K and Mukhopadhyay, N K and Bhattacharya, D K and Dwarakadasa, E S and Parida, N (1999) Studies on indentation fracture toughness on ceramic and ceramic composite using acoustic emission technique. Bulletin of Materials Science, 22 (1). pp. 25-32.

Ray, Ashok K and Steinbrech, R W (1999) Crack propagation studies of thermal barrier coatings under bending. Journal of the European Ceramic Society, 19 (12). pp. 2097-2109.

Ray, S C (1999) Sintered fly ash aggregate Chinese technology at a glance. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Rayalu, S and Meshram, S U and Labhasetwar, N K and Biniwale, R and Khanna, P (1999) New frontiers for high value utilisation of fly ash : production of zeolites. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

S

Saha, A K (1999) Chemical upgrading of deep-sea manganese nodules. NML Technical Journal, 40 (4). pp. 177-182.

Saha, A K and Khan, Z H and Premchand, (1999) Reclamation of tungsten metal from tungsten alloy scrap. Transactions of the indian institute of metals, 52 (5). pp. 353-355.

Saha, P (1999) Light-weight aggregates for advanced civil engineering. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Sahu, K C (1999) Characterization and utilisation of fly ash. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Sahu, S K and Chakravortty, V and Reddy, M L P and Ramamohan, T R (1999) Synergistic Extraction of Trivalent Lanthanoids with 3-Phenyl-4-benzoyl-5-isoxazolone and Various Sulphoxides. Radiochimica Acta, 85 . pp. 107-111.

Saxena, Mohini and Asokan, P (1999) Coal ash utilization in building and agricultural applications. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Seehra, S S and Krishnmurthy, (1999) A study on techno-economic aspects for highway projects. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Singh, D D N and Gaur, B and Dey, A K and Singh, B K and Dey, M and Ghosh, Rita (1999) Interrelating electrochemical properties, salt-spray resistance and industrial performance of white-rust controlling passivators for galvanised surfaces. NML Technical Journal, 40 (2). pp. 63-76.

Singh, Raghuvir and Gaur, B and Singh, A K (1999) Corrosion protection of stainless-steel in chlorinated solutions by electrochemical technique. NML Technical Journal, 40 (3). pp. 127-133.

Singh, S D and Biswas, D K and Mishra, K K and Ramachandrarao, P (1999) Eco-friendly cokeless-cupola. NML Technical Journal, 40 (1). pp. 1-12.

Singh, S R (1999) Principle of microscopy. In: Materials characterization techniques: principles and applications. NML, Jamshedpur, pp. 69-90. ISBN 81-87053-29-1

Singh, T B (1999) Role of additives on the corrosion behaviour of nickel in 5% sulphuric acid. NML Technical Journal, 40 (4). pp. 171-176.

Sinha, Arvind and Das, Swapan K and Vijaya Kumar, T V and Rao, Venkatesh and Ramachandrarao, P (1999) Synthesis of Nanosized Copper Powder by an Aqueous Route. Journal of Materials Synthesis and Processing, 7 (6). pp. 373-377.

Sircar, J K (1999) Mass spectrometry: Instrumental aspect-The source. NML Technical Journal, 40 (4). pp. 135-142.

Sircar, J K and Mohanta, M K and Rao, A S and Srivastava, S C (1999) Mass spectrometry: Instrumental aspect-The analyser. NML Technical Journal, 40 (2). pp. 77-83.

Sircar, J K and Mohanta, M K and Rao, A S and Srivastava, S C (1999) Mass spectrometry: Instrumental aspect-The source. NML Technical Journal, 40 (3). pp. 135-142.

Sircar, J K and Mohanta, M K and Rao, A S and Srivastava, S C (1999) Mass spectrometry: Instrumental aspect-The source. NML Technical Journal, 40 (4). pp. 143-162.

Sridhar, G (1999) Scanning electron microscopy: basic principles and applications. In: Materials characterization techniques: principles and applications. NML, Jamshedpur, pp. 91-107. ISBN 81-87053-29-1

Sridhar, G and Das, Swapan K and Mukhopadhyay, N K (1999) Failure analysis of low carbon free-cutting steel wire rods. Engineering Failure Analysis, 6 (3). pp. 155-172.

Srikanth, S and Alex, T C and Premchand, (1999) Reduction roasting of central Indian Ocean nodules by use of fuel oil: a thermodynamic and kinetic analysis. Transactions of the Institution of mining and metallurgy section c-mineral processing and extractive metallurgy, 108 ( ). C138-C146.

Srikanth, S and Goel, R P and Ramachandrarao, P (1999) Limitations of a regular associated solution approximation in describing the thermodynamic behaviour of complex liquid alloys. Calphad, 23 (1). pp. 85-100.

T

To Duy, Ca (1999) Influence of Rare Earth Metals on the Nucleation and Precipitation of Slag Inclusions during Solidification of Molten Steel. PhD thesis, National Metallurgical Laboratory (NML).

Tripathy, D A (1999) Ash management plan of CESC Ltd An overview. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India.

Tripathy, T and Pandey, S R and Karmakar, N C and Bhagat, R P and Singh, R P (1999) Novel flocculating agent based on sodium alginate and acrylamide. European Polymer Journal . pp. 2057-2072.

V

Vaish, A K and Goswami, N G and Biswas, P K and Minz, R K and Humane, M M and Sivaramakrishnan, C S and Ramachandrarao, P (1999) Ancient iron making in India-historical perspective, technological aspects and future prospects. NML Technical Journal, 40 (4). pp. 183-194.

Vaish, A K and Humane, M M and Minz, R K and Chakravarti, A K and Ramachandrarao, P (1999) Rare earth metals addition to low carbon steel-thermodynamic aspects, process considerations and effect on mechanical properties. NML Technical Journal, 40 (3). pp. 85-125.

Vaish, A K and Singh, S D and Singh, K K and Paul, K K and Mallik, A K and Ramachandrarao, P (1999) Design aspects of DC arc plasma reactors for materials processing. Bulletin of Electrochemistry, 15 (7-8). pp. 323-328.