Items where Year is 1998

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 171.

Annual Reports

Director, NML (1998) Annual Report 1997-1998. NML, Jamshedpur.

Article

Adhikari, U B and Das, S K and Banerjee, G (1998) Bonding of high fly ash content ceramic bodies at low temperatures. pp. 143-148.

Bahadur, Aruna (1998) Development and evaluation of a low chromate corrosion inhibitor for cooling water systems. Canadian Metallurgical Quarterly, 37 (5). pp. 459-468.

Bahadur, Aruna (1998) Partial substitution of chromate by borate for cooling water inhibition. ISIJ International, 38 (5). pp. 469-473.

Bahadur, Aruna (1998) Study of Film Growth on Copper in Chromate Solution by a Radioactive Tracer Technique. Journal of Materials Science Letters, 17 (8). pp. 701-704.

Bandopadhyay, A (1998) Salient features of air pollution control technology in cupola furnaces. NML Technical Journal, 40 (3). pp. 69-76.

Bhadani, S N and Tewari, M and Agrawal, A and Sekhar, K C (1998) Extractive-photometric determination of cobalt(II) in steels using 4-(2-pyridylazo)resorcinol and xylometazoline hydrochloride. Journal of the indian chemical society, 75 (3). pp. 176-177.

Bhagat, R P (1998) Flocculation of Iron ore Slimes using Synthesised Starch-g-Acrylamide Copolymer. Steel India, 21 (2). pp. 43-48.

Bhaskar Raju, G and Forsling, Willis and Holmgren, Allan (1998) Complexation mechanism of dextrin with metal hydroxides. Journal of Colloid and Interface Science, 200 . pp. 1-6.

Bhattacharjee, S and Dasgupta, P and Paul, A R and Ghosal, S and Padhi, K K and Pandey, L P (1998) Mineral element composition of spinach. Journal of the science of food and agriculture, 77 (4). pp. 456-458.

Bhattacharyya, P and Sarkhel, B R and Maulik, S C (1998) Efficacy of multi-gravity separator in recovery of values from waste using experimental design. NML Technical Journal, 40 (4). pp. 109-114.

Bhattamishra, A K and Lal, Kishori (1998) Influence of ageing on corrosion behaviour of Al-Mg-Si alloys in chloride and acid media. Zeitschrift fur metallkunde, 89 (11). pp. 793-796.

Ca, To Duy (1998) Effect of Molybdenum on the Formation of Carbides and Phases Structure of 12Cr20Ni38Mo5-Alloy. NML Technical Journal, 40 (3). pp. 66-76.

Ca, To Duy (1998) Effect of molybdenum on the formation of carbides and phases structure of 12Cr20Ni38Mo5-alloy. NML Technical Journal, 40 (3). pp. 87-94.

Ca, To Duy (1998) Influence of rare earth metals on macrostructure of continuously cast steel rolling pipe. NML Technical Journal, 40 (2). pp. 57-62.

Chandrasekhar, K and Subramanian, S and Modak, J M and Natarajan, K A (1998) Removal of metal ions using an industrial biomass with reference to environmental control. International Journal of Mineral Processing, 53 (1-2). pp. 107-120.

Chattopadhyay, A (1998) Microstructure and liberation characteristics of chalcopyrite concentrate from Indian Copper Complex, Ghatsila. NML Technical Journal, 40 (1). pp. 23-28.

Chattoraj, I and Mitra, A (1998) Changes in electrochemical responses of some Fe-B-Si-Cu-Nb alloys before and after devitrification. Scripta Materialia, 39 (6). pp. 755-761.

Chattoraj, I and Pathak, L C (1998) Electrochemical behavior of superconducting Bi1.4Pb0.6Sr2Ca2Cu3O10 in halide-containing acetate buffer. Corrosion Science, 54 (6). pp. 435-443.

Chaudhuri, S and Ghosh, R N (1998) Some aspects of mechanisms and modelling of creep behaviour of 2.25Cr-1Mo steel. ISIJ International, 38 (8). pp. 881-887.

Das, N and Pandey, M C and Ghosh, R N (1998) High temperature creep behaviour of single crystal superalloy. Material Science and Technology, 14 (5). pp. 429-434.

Dey, Shobhana and Bhattacharya, S (1998) Comparative Performance Analysis of Frothers — A Review of Available Methodologies. Mineral Processing and Extractive Metallurgy Review: An International Journal, 18 (2). pp. 201-213.

Ghosh, S and Das, S K (1998) Carbide Morphology Observations in Rare-Earth-Treated Fe-Al-Si-C Alloys. Materials Characterization, 41 (5). pp. 217-221.

Ghosh Chowdhury, S and Jena, A K and Ray, R K (1998) Recrystallization behavior of boron-doped Ni76Al24. Metallurgical and Materials Transactions A, 29 (12). pp. 2893-2902.

Ghosh Chowdhury, S and Mukhopadhyay, N K and Das, Goutam and Das, Swapan K and Bhattacharya, D K (1998) Failure analysis of aweld repaired steam turbine casing. Engineering Failure Analysis, 5 (3). pp. 205-218.

Ghosh Chowdhury, S and Ray, R K and Jena, A K (1998) Rolling texture in the intermetallic compound Ni76Al24(B). Materials Science and Engineering A, 246 (1-2). pp. 289-301.

Goswami, M C and Prakash, S and Sarkar, B (1998) A reacting system cold-model foaming study simulating in-bath smelting. Scandinavian Journal Of Metallurgy, 27 (3). pp. 97-102.

Goswami, M C and Prakash, S and Sarkar, S B (1998) A reading system cold-model foaming study simulating in-bath smelting. Scandinavian Journal Of Metallurgy, 27 (3). pp. 97-102.

Goswami, M C and Prakash, S and Sinha, S N and Tiru, P (1998) Experimental study on the foaming phenomena in a non-reacting system. NML Technical Journal, 40 (2). pp. 51-56.

Goswami, M C and Singh, S D and Vaish, A K (1998) Smelting reduction of lean pyrite cynder of complex mineralogy for the production of low silicon ferro-alloys. Tool & Alloy Steels, 32 (3). pp. 9-14.

Kumar, Pravesh (1998) Effect of fillers on acousto ultrasonic response in GRP composites. Bulletin of Materials Science, 21 (1). pp. 93-97.

Kumar, Rakesh and Das, Samar (1998) Physicochemical and structural factors in the sulfuric acid leaching of nickel- and copper-bearing synthetic birnessites. Metallurgical and Materials Transactions B, 29 (3). pp. 527-540.

Kumar, Rakesh and Ray, R K (1998) Modeling Microstructural Heterogeneity in Materials by Using Q-Mode Factor Analysis. Materials Characterization, 40 (1). pp. 7-13.

Mishra, Suman K and Ranganathan, S and Das, Swapan K and Das, Samar (1998) Investigations on precipitation characteristics in a high strength low alloy (HSLA) steel. Scripta Materialia, 39 (2). pp. 235-259.

Mitra, A and Palit Sagar, S and Chattoraj, I (1998) Crystallization and magnetic behaviour of Fe-Nb-Cu-Si-B alloys. Philosophical magazine b-physics of condensed matter statistical mechanics electronic optical and magnetic properties, 77 (6). pp. 1681-1691.

Mohanty, S P and Sahu, S K and Mohanty, I and Reddy, M L P and Chakravortty, V (1998) Extraction of uranium(VI) with binary mixture of LIX 984 and naphthenic acid. Solvent Extraction Research and Development, Japan, 5 . pp. 189-198.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Das, Goutam and Chattoraj, I and Das, S K and Bhattacharya, D K (1998) An investigation of the failure of low pressure steam turbine blades. Engineering Failure Analysis, 5 (3). pp. 181-193.

Nguyen, Quang Chinh and Illy, Judit and Ca, To Duy (1998) Precipitation and GP-zone structures in AlZnMg (Cu, Zn) alloys. NML Technical Journal, 40 (2). pp. 45-49.

Padhi, K K (1998) Observation of x-ray interferences on apatite and secondary phosphate minerals in Sukulu phosphatic soil, Uganda. NML Technical Journal, 40 (2). pp. 63-68.

Padhi, K K (1998) X-ray fluorescence analysis of iron ore using de-jongh's algorithm. NML Technical Journal, 40 (4). pp. 115-122.

Pandey, J L and Banerjee, M K (1998) Concrete corrosion and control practices - an overview. Anti-corrosion methods and materials, 45 (1). 5 - .

Pandey, J L and Banerjee, M K (1998) Energy conservation with the use of solar selective coatings. Anti-corrosion methods and materials, 45 (1). 16- .

Parida, N and Ravi Kumar, B and Bhattacharya, D M (1998) Fatigue damage assessment and detection of onset of crack initiation by x-ray diffraction. Transactions of the Indian Institute of Metals, 51 (2-3). pp. 175-177.

Pathak, P N and Rafiuddin, S (1998) Recovery of barite from complex sulphide ores. Metals Materials and Processes, 10 (2). pp. 189-191.

Prabhakar, S and Bhaskar Raju, G (1998) Amenability of column flotation for lead-zinc beneficiation - A case study. Metals Materials and Processes, 10 (2). pp. 109-118.

Prasad, B K and Venkateswarlu, K and Modi, O P and Jha, A K and Das, S and Dasgupta, R and Yegneswaran, A H (1998) Sliding wear behavior of some Al-Si alloys: Role of shape and size of Si particles and test conditions. Metallurgical and Materials Transactions A, 29 (11). pp. 2747-2752.

Prasad, Sanjay and Pandey, B D (1998) Alternative processes for treatment of chalcopyrite —A review. Minerals Engineering, 11 (8). pp. 763-781.

Prasad, V V S and Rao, A S and Prakash, U and Rao, V R and Rao, P K and Gupt, K M (1998) Alumina addition to fluoride slags for recycling of low oxygen high conductivity copper scrap through electroslag crucible melting. ISIJ International, 38 (12). pp. 1387-1389.

Prasad, V V S and Rao, A S and Prakash, U and Rao, Venkatesh and Rao, P K and Gupt, K M (1998) Effect of process variables on electroslag crucible melting of copper-chromium alloys. ISIJ International, 38 (12). pp. 1390-1392.

Prodhan, A and Sanyal, D (1998) Cooling curves analysis of aluminium solidified without and with magnetic or electric field. Journal of Materials Science Letters, 16 (11). pp. 958-961.

Puvvada, G V K and Yedavalli, B V S and Rao, A S (1998) Solvent extraction of gallium from Bayer Process liquor (Indal, Muri) using 7-alkyl-substituted-8-hydroxyquinoline (Kelex-100). Transactions of the Indian Institute of Metals, 51 (4). pp. 223-225.

Rajeswari, S and Jayakumar, T and Rao, C B and Bhattacharya, D K and Raj, B (1998) Residual stress measurement in ferritic steel tube welds using X-ray diffraction. Science and technology of welding and joining, 3 (4). pp. 204-207.

Ram, S and Singh, T B and Pathak, L C (1998) Synthesis and thermogravimetric analysis of amorphous boehmite fibres. Physica Status Solidi A-applied research, 165 (1). pp. 151-164.

Ram, S and Singh, T B and Srikanth, S (1998) Thermal desorption process of water in amorphous AlO(OH)·αH2O fibres prepared by an electrochemical method. Materials Transactions, JIM, 39 (4). 485-491 .

Ramachandrarao, P and Srikanth, S (1998) Can there be a second kind of entropy catastrophe in the melting of metastable solids? Journal of Materials Research, 13 (11). pp. 3270-3274.

Ranganathan, S (1998) Interaction of the crucible material with liquid steel during vacuum deoxidation in a magnesium oxide crucible-comparison of a model with experiment. NML Technical Journal, 40 (1). pp. 29-34.

Ranganathan, S (1998) Thermochemical analysis of production of ferrochromium in submerged arc furnace. Ironmaking & Steelmaking, 25 (6). pp. 466-471.

Ranganathan, S and Godiwalla, K M (1998) Influence of pre-reduction of ore on the temperature profile inside a submerged-arc furnace producing ferro-chromium. Steel Research, 69 (12). pp. 476-481.

Ray, Ashok K (1998) A new technique for precracking ceramic specimens in fatigue and fracture. Journal of the European Ceramic Society, 18 (12). pp. 1655-1662.

Ray, Ashok K and Tiwari, Y N and Sinha, A N and Sinha, R K and Singh, R and Chaudhuri, S (1998) Life prediction of service exposed reactor and distillation column materials used in a petrochemical industry. Engineering Failure Analysis, 5 (4). pp. 289-298.

Reddy, M L P and Varma, R L and Ramamohan, T R and Sahu, S K and Chakravortty, V (1998) Cyanex 923 as an extractant for trivalent lanthanides and yttrium. Solvent Extraction and Ion Exchange, 16 (3). pp. 795-812.

Saha, A K (1998) Purification and enrichment of low grade molybdenite concentrates. NML Technical Journal, 40 (1). pp. 17-21.

Saha, A K and Khan, Z H (1998) Production of ferrite grade iron oxide from iron ore fines. NML Technical Journal, 40 (4). pp. 131-136.

Sahu, S K and Chakravortty, V (1998) Extraction of uranium(VI) with binary mixtures of a quadridentate Schiff base and various neutral donors. Journal of Radioanalytical and Nuclear Chemistry, 227 (1-2). pp. 163-165.

Sekhar, K C and Subramanian, S and Modak, J M and Natarajan, K A (1998) Removal of metal ions using an industrial biomass with reference to environmental control. International Journal of Mineral Processing, 53 (1-2). pp. 107-120.

Singh, D D N (1998) Awareness of corrosion problems can save millions: Economical impact of corrosion inhibitors. Transactions of the indian institute of metals, 51 (5). pp. 291-301.

Singh, D D N and Dey, M (1998) Chloride based bright zinc plating baths: A comparative evaluation. NML Technical Journal, 40 (1). pp. 1-10.

Singh, D D N and Gaur, B and Ghosh, Rita and Singh, B K (1998) Role of corrosion inhibitors or grain boundary corrosion control of Cr-Mn-Cu stainless steel in pickling solution. NML Technical Journal, 40 (3). pp. 77-86.

Singh, D D N and Gaur, B and Singh, B K and Ghosh, Rita (1998) Effective inhibition of corrosion of steel in phosphoric acid solution. NML Technical Journal, 40 (2). pp. 35-44.

Singh, D D N and Ghosh, Rita and Singh, B K (1998) Low Alloyed Thermo Mechanically Treated (TMT) Steel Rebars: An Ideal Solution for Reinforcement Corrosion. Steel in Construction, 1 (2). pp. 1-11.

Singh, Raghuvir and Singh, M N (1998) Tape coatings: A review. NML Technical Journal, 40 (4). pp. 123-129.

Srikanth, S and Ramachandrarao, P (1998) Construction and application of metastability field diagrams for non-equilibrium processing of alloys. International Journal of Non-equilibrium processing, 10 (3-4). pp. 219-239.

Vaish, A K and Humane, M M and Chakrabarty, A K and Ramachandrarao, P (1998) Direct current transferred arc plasma reactor-Its suitability for smelting reduction and refining processes. NML Technical Journal, 40 (3). pp. 95-108.

Yadav, P N S (1998) A study of passive behaviour of aluminium electrode in ethylenediamine. NML Technical Journal, 40 (1). pp. 11-15.

Book or NML Publication

Das, S N and Thakur, R S and Ray, H S (1998) Red Mud Pollution Problems : Some observations. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 11-16. ISBN 81-87053-28-7

Kumar, Rakesh and Srivastava, J P and Premchand, (1998) Utilization of iron values of red mud for metallurgical applications. In: Environmental and Waste Management (ISSN : 0971-9407). National Metallurgical Laboratory, Jamshedpur, India, Jamshedpur, India, pp. 108-119.

Pradhan, B and Chakraborty, D (1998) Delamination Initiation at the Interface of Broken & Continuous Plies In FRP Composite Laminates. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 206-213.

Pradhan, B and Kumar, N Venu and Rao, N S (1998) Modelling of Multiple Transverse Cracks In Angle - Ply Laminates. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 224-232.

Pradhan, J and Das, S N and Thakur, R S (1998) Use of activated Red Mud for removal of Phosphate and Selenite from Aqueous Solutions. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 155-162. ISBN 81-87053-28-7

Pradhan, J and Das, S N and Thakur, R S (1998) Use of activated Red Mud for Removal of Phosphate and Selenite from Aqueous Solutions. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 155-162. ISBN 81-87053-28-7

Pradhan, S K and Dwarakadasa, E S (1998) Processing & Characterization of UHMWPE-CSP (Coconut Shell Powder) Composite. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 283-287.

Prasad, S N and Navale, N G and Panda, S (1998) A Study on Impact Resistance of Glass Fibre Reinforced Vinylester Composites against ballistic Projectiles. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 246-253.

Radhakrishna Bhat, B V and Somaraju, K and Venkataraman, B and Bhanuprasad, V V (1998) Metal Matrix Composites as Potential Armour Materials. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 103-115.

Rao, V V (1998) Prepararion of Al2O3 ceramic matrix in-situ composites by reactive melt penetration. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 132-136.

Ray, A C (1998) Sustainable technology through pollution prevention programme. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 87-91. ISBN 81-87053-28-7

Ray, Ajoy K and Mandal, S and Das, S K and Krishnan, C S S (1998) Low Cost In-Situ Formation of AIN - B- SiC. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 151-159.

Ray, B C and Hassan, S T and Clegg, D W (1998) Effects of Thermal Shock on Mechanical Behaviour of Kevlar Fibre Composites. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 214-223.

Sengupta, B and Kumar, A and Hashim, M A and Ramakanth, C (1998) Nickel and chromium in wastewater - The Malaysian experience. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 27-51. ISBN 81-87053-28-7

Sharma, Manoj Kumar (1998) Initiatives in Environment Management undertaken by the Small Industries Development Bank of India. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 163-166. ISBN 81-87053-28-7

Sharma, S C and Girish, B M and Kamath, Rathnakar and Satish, B M (1998) An Evaluation of the sliding Wear Behaviour of SiC Particles Reinforced Copper Alloy Composite Materials. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 72-82.

Shukla, M K and Nigam, Vineeta and Singh, Harjeet and Setua, D K and Mathur, G N (1998) Lignin Reinforced Rubber Composites. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 233-245.

Sing, S B and Ray, S and Gupta, R K and Bhatnakar, N S (1998) Influence of Anisotropy on Creep in a Whisker Reinforced MMC Rotating Disc. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 83-102.

Sinha, P K (1998) Modern Composites - A Renascent Material System. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 1-8.

Sinha, S N and Agrawal, M K and Saha, R K (1998) Pollution and its Control in Copper Industry. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 185-196. ISBN 81-87053-28-7

Subramanian, C and Suri, A K (1998) Recovery of Niobium and Tantalum from Low Grade Tin Slag - A Hydrometallurgical Approach. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 100-107. ISBN 81-87053-28-7

Subramanian, S and Lahiri, A K (1998) Process Engineering for Pollution Control and Waste Minimisation in Non -Ferrous Metallurgical Industries. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 17-26. ISBN 81-87053-28-7

Tripathy, P K and Shah, V D and Rakhasia, R H and Sehra, J C (1998) Environmental considerations in the selection of metallurgical processes for the extraction of molybdenum from low grade molybdenite concentrate. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 92-99. ISBN 81-87053-28-7

Vaish, A K and Singh, S D and Ghosh, S B and Singh, O and Bhattacharyya, A P and Maharaj, L and Ramachandrarao, P (1998) A Comprehensive pollution control system for the mitigation of fine particulates of lead and Sox gases from secondary lead smelters. In: Environmental & waste management: in non-ferrous metallurgical industries. NML, Jamshedpur, pp. 225-229. ISBN 0971-9407

Viswanathan, M (1998) Integrated Pollution Control and Waste Management in Copper Base Processing Industries. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 67-78. ISBN 81-87053-28-7

Viswanathan, P V and Sankaran, C (1998) An Overview of environmental issues and protection measures in Indian non-ferrous plants. In: Environmental & waste management: in non-ferrous metallurgical industries. NML, Jamshedpur, pp. 197-208. ISBN 0971-9407

Conference or Workshop Item

AL-Jarrah, J A and Ghosh, P K and Ray, S (1998) Mixing & solidification Processing of AI-AI2o3 Composite. In: UNSPECIFIED.

Bahl, O P and Mathur, R B and Dwivedi, Hariom (1998) Correlation between the Surface Energetics of Reinforcement and Mechanical Properties of Carbon/Carbon Composites. In: UNSPECIFIED.

Bandopadhyay, P (1998) Coal Flotation : The Status and Outlook. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Bhakta, U C (1998) Power Plant Component Failures Investigation and Remedial Measures. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Bhatnagar, Deepak and Jancy, A (1998) Cobalt recovery from Metallurgical Wastes of Zinc Industry. In: UNSPECIFIED.

Bhattacharyya, P and Chattoraj, U S and Saha, P and Sarkhel, B R and Chakrabarti, D M (1998) Salvaging the values from the rejects of a by-product recovery plant. In: UNSPECIFIED.

Biswas, A K (1998) Role of Characterisation in Mineral Seperation by Froth Flotation. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Biswas, P K (1998) Manufacturing Processes of Polymer Matrix Composite Material for Aerospace Application. In: UNSPECIFIED.

Biswas , P K and Dev, S C and Krishnan, C S S (1998) Some Critical Issues in the Processing of Magnesium Alloys & Composites. In: UNSPECIFIED.

Ca, To Duy (1998) Effect of Rare Earth Metals Injection & Gas Stirring on Cleanliness of Pipeline Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Effect of Rare Earth Metals on Sulphide inclusion in Pipeline Steel. In: Non-metallic inclusion in Steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Influence of Rare Earth Metals on Macrostructure of Continuously Cast Steel Rolling Pipe. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Influence of Rare Earth Metals on Mechanical Properties of Pipeline Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Influence of Rare Earth Metals on Non-Metallic Inclusions in Cast Alloy Steels. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) Precipitation and Gp-Zone Structures in AlZnMg(Cu, Zr) Alloys. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Ca, To Duy (1998) The use of Rare Earth Metals for Modification of Non-Metallic inclusions in Silicon Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Chandwani, H K and Vishwanathan, V and Mahadevan, H (1998) Environmental Issues to be Addressed in Indian Alumina Refineries and their Possible Solutions. In: UNSPECIFIED.

Chattoraj, I and Mitra, A (1998) Structure-electrochemical correlations in amorphous and devitrified Fe-based ferromagnetic alloys. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Datta, S and Deb, P and Bandyopadhyay, N R and Banerjee, M K (1998) Reinforcing age Hardenable Al-Cr Matrix Alloy In-Situ and by SiC/Al2O3. In: UNSPECIFIED.

Deshpande, K G (1998) Use of spent Potlining from the Aluminium Electrolytic cell as an additive to Arc Furnace Steel Melting and Cupola iron Melting in Steel industries. In: UNSPECIFIED.

Duy, C To (1998) Non-Metallic Inclusions in Carbon Steel Containing Rare Earth Metals. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Duy, P To (1998) Effect of Cao-Mgo-Re-Caf2 Synthetic Powder on Desulphurization of 12Cr20Ni38Mo5 Alloy. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur.

Floyd, John (1998) Pollution Control in the Non-Ferrous Industries - An Indian Perspective of Worldwide Importance. In: UNSPECIFIED.

Gaur, B (1998) Effect of Surface Preparation on Corrosion of Metals and Alloys. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Goel, Malti (1998) Reduction of Greenhouse Gas Pollution in Non-Ferrous Metal industry : Indian Perspective. In: UNSPECIFIED.

Hait, Jhumki and Jana, R K and Kumar, Vinay and Dasgupta, P and Bandyopadhyay, M and Sanyal, S K (1998) Hydrometallurgical processing of anode slime for recovery of valuable metals. In: UNSPECIFIED.

Hegde, L and Prasad, S N (1998) Formability of Metal-Matrix Composite based on Aluminium Alloy 6061 - Reinforced with Silicon Carbide Particulars. In: UNSPECIFIED.

Jakhu, M R (1998) Process Control in Flotation Plants. In: Workshop on Froth Flotation:Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Jaleel, V A and Panda, P K and Kannan, T S (1998) Evaluation of Mechanical Properties of SiC Whisker Reinforced In-Situ Composites Prepared by Carbothermal Reduction of Silicate Minerals. In: UNSPECIFIED.

Jana, R K and Gorai, Bipra and Premchand, (1998) Processing of dust materials from Indian copper plants. In: UNSPECIFIED.

Jangbahadur, S S and Garg, Rajneesh and Agarwal, Chirag (1998) Role of Phosphating systems in Electrodeposition priming & Latest Trends in Surface Coating in Automobile Industry. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Kale, B B and Kulkarni, S S and Gokarn, A N (1998) Conversion of Natural Resources through Waste reduction at the Processing Step by Briquetting Technique. In: UNSPECIFIED.

Khanna, A S (1998) New Generation Coatings - A Combination of Thermal Spray and Organic Paint Coatings to give Enhanced Corrosion Protection in Aggressive Environments. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Kohad , V P (1998) Flotation of Sulphide Ores - HZL Experience. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Kumar, Sanjay and Das, U S and Singh, K K and Ramachandrarao, P (1998) Development of ceramic floor and wall tiles from fly ash. In: UNSPECIFIED.

Kumar, Sanjay and Singh, K K (1998) Development of Corundum/Mullite Composites from fly Ash & Alumina Mix by Reaction Sintering. In: UNSPECIFIED.

Kumar, Surendra and Pradhan, B (1998) Three-Dimensional Finite Element Analysis of Composite Laminates Subjected to Transverse Impact. In: UNSPECIFIED.

Kumar, Vinay and Agrawal, A and Pandey, B D and Premchand, (1998) Processing of spent tanning and chrome plating solutions for chromium recovery. In: Seminar on Environmental & waste management: in non-ferrous metallurgical industries, 1998, NML Jamshedpur, India.

Maity, P C and Panigrahi, S C (1998) Production of Aluminium Matrix In - Situ Particulate Copmosites. In: UNSPECIFIED.

Mallick, B and Maity, P C and Sinha, V K (1998) Production of Aluminium-Silicon Carbide Cast Particle Composites Without Magnesium. In: UNSPECIFIED.

Mehrotra, S P (1998) Computer Aided Design and Synthesis of Flotation Circuits. In: Workshop on Froth Flotation : Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Misra, D D (1998) Control of Comminution Circuit for Efficient Froth Flotation. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Mohanty, O N and Jha, G (1998) Corrosion Control through Surface Modification. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Mukherjee, T K and Patra, R N (1998) Status of Waste Treatment in Titanium Mineral Industries. In: UNSPECIFIED.

Murthy, K S N and Pugazhenthy, L (1998) Recent Technology and Market Trends in Galvanizing. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Narang, S K (1998) Industrial Metal Finishing for Corrosion Control. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Pal, B C and Pillai, R M and Satyanarayana, K G (1998) Light Metal Matrix Composites - Present Status & Future Strategies. In: UNSPECIFIED.

Panda, P K and Mariappan, L and Kannan, T S (1998) Preparation of Al2O3 - SiC In-Situ Composite Powder Mixtures by Carbothermal Reduction of Kaolinite. In: UNSPECIFIED.

Pandey, A K and Debnath, K K and Setua, D K and Mathur, G N and Chandra, R (1998) Butyl Rubber-Nylon Composites with Improved Flame Retardancy & Gas Impermeability. In: UNSPECIFIED.

Pandey, J L and Rao, T B and Singh, S and Singh, S K (1998) Approaches to ISO certification - Paint manufacturing industry. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Pandey, P K and Dash, R R and Singh, M P (1998) Studies on the In-Situ Formation of AI2O3 - SiC Ceramic Matrix Composite from Tata Steel Colliery over Burden. In: UNSPECIFIED.

Parbat, R N (1998) Environmental and Waste management in Non-ferrous Metallurgical Industries - Critical issues. In: UNSPECIFIED.

Pathak, L C and Mishra, Suman K and Srikanth, S (1998) Effect of Silver on the Sintering Characteristics of High T Ceramic Superconductors. In: Proceedings of Composite Materials, March, 1998, NML Jamshedpur, India.

Prabhakaram, P (1998) Organic Coatings-- Basic Considerations of Protections of Iron and Steel. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Pradip, (1998) Process Optimization in Flotation Separation Plants. In: Workshop on Froth Flotation : Recent Trends, Septembe 22-24, 1998, RRL Bhubaneswar.

Sastri, S R S (1998) Column Flotation: Theory and Practice. In: Workshop on Froth Flotation:Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Singh, D D N (1998) Role of Concrete and Steel Surface on Performance of Structures. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Singh, D D N and Dey, A K and Dey, M and Singh, B K (1998) Corrosion characteristics of HSLA steels in sea water. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, D D N and Dey, A K and Khan, I (1998) Passivation of galvanized surfaces to improve their corrosion resistance. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India, .

Singh, D D N and Singh, B K (1998) Effect of mixed cations on phosphate coating of steel. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, Inder (1998) Atmospheric corrosion of 18 years study. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, Inder and Bhattamishra, A K (1998) Corrosion behaviour of magnesium alloys in chloride medium. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, Inder and Mukherjee, A N (1998) Corrosion of tinned sheets during transportation - A case study. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, Inder and Mukherjee, A N (1998) Corrosion of Tinned Sheets during Transportation-A Case Study. In: Proceedings of International Conference on Corrosion CORON-97 Nehru Centre, Mumbai, India, 3-6, December, 1997, NML, Jamshedpur.

Singh, M N and Singh, Inder (1998) High temperature resistant slurry based coating for steel. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, Ratnakar (1998) Development of Flotation Reagents with Chelating Functional Groups. In: Workshop on Froth Flotation : Recent Trends, September 22-24,1998, RRL Bhubaneswar.

Singh, S R (1998) Characterization of Corrosion Related Failures. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Singh, T B (1998) Protective Nature of the Surface film Formed on the Weathering Steel. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Singh, T B and Lal, Kishori and Mohanty, R K (1998) Corrosion behaviour of rapidly solidified lead-aluminium alloys for battery grids. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Sivaramakrishnan, C S and Choudhuri, S P (1998) Role of Thermomechanical Treatments on Mechanical Prope-rties, Microstrucures and Corrosion Properties of Micro-alloyed Steels. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Other

Director, NML (1998) List of NML Technical reports. National Metallurgical Laboratory, Jamshedpur.

This list was generated on Wed Dec 11 03:12:48 2019 IST.