Items where Division is "Material Science and Technology" and Year is 2017

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | C | D | G | H | J | K | M | N | P | R | S | V
Number of items: 78.

A

Anjaneyulu, Ch and Murty, B S (2017) Soft magnetic properties of Fe-based bulk metallic glass system containing niobium and copper. Journal of Metallurgy and Materials Science, 59(3) . pp. 103-110.

C

Chakrabarty, A K and Khutia, N and Bar, H N and Dey, P P and Sivaprasad, S (2017) Effect of Loading Variations on Damage of SA333 C-Mn Steel. Materials Today: Proceedings, 4(2) Part A . pp. 415-423.

Chidambaram, S and Kamaraj, A (2017) Failure investigation of an industrial crankshaft made of ductile iron. Advances in natural and applied sciences, 11(8) . pp. 25-30.

D

Das, Anindya and Ghosh, M and Tarafder, S and Chakrabarti, D (2017) Micromechanisms of deformation in dual phase steels at high strain rates. Material Science and Engineering A Structural Materials Properties Microstructure and Processing, 680 (IF-3.094). pp. 249-258.

Das, Arpan (2017) Resurgence of texture in cyclically deformed austenite. Materials Characterization, 123 (IF 2.714). pp. 315-327.

Datta, A K and Sivaprasad, S and Prasad, P (2017) Free vibration analysis and shape optimization of offshore tubular structures. Journal of Metallurgy and Materials Science, 59(3) . pp. 133-141.

Dey, Shobhana and Mohanta, M K and Singh, Ratnakar (2017) Mineralogy and textural impact on beneficiation of goethitic ore. International Journal of Mining Science and Technology, 27(3) (IF-1.383). pp. 445-450.

Dey, Sushmita and Roy, Rajat K and Ghosh, M and Mallick, A Basu and Mitra, A and Panda, A K (2017) Enhancement in magnetocaloric properties of NiMnGa alloy through stoichiometric tuned phase transformation and magneto-thermal transitions. Journal of Magnetism and Magnetic Materials, 439 (IF-2.630). pp. 305-311.

Divya, Nangunoori and Devender, V (2017) Mechanical behaviour of banana flax fiber reinforced soy resin composites. Journal of Metallurgy and Materials Science, 59(3) . pp. 111-116.

Dwivedi, Deepak and Randhawa, N S and Saroj, Sanjay and Jana, Ranjeet Kumar (2017) An Overview of Manganese Recovery by Hydro and Pyro-Metallurgical Routes. Journal of The Institution of Engineers (India): Series D, 98(1) . pp. 147-154.

G

Ghosh, M and Bansal, Gourav and Chandan, A and Shah, Minal and Tripathy, S and Murugaiyan, Premkumar and Sahoo, Biraj and Mukherjee, K and Srivastava, V C and Ghosh Chowdhury, S (2017) Functionally Driven Steels: A Review. Steel Tech, 12(1) (NonSCI). pp. 13-36.

Goudar, D M and Srivastava, V C and Rudrakshi, G B (2017) Effect of Atomization Parameters on Size and Morphology of Al-17Si Alloy Powder Produced by Free Fall Atomizer. Engineering Journal, 21(1) (IF-0.384). pp. 155-168.

Guguloth, K and Roy, Nilima (2017) Creep deformation behavior of 9Cr1MoVNb (ASME Grade 91) steel. Materials Science and Engineering A, 680 (IF-3.094). pp. 388-404.

Guguloth, K and Swaminathan, J and Roy, Nilima and Ghosh, R N (2017) Uniaxial creep and stress relaxation behavior of modified 9Cr-1Mo steel. Materials Science and Engineering A- Structural Materials Properties Micro-structure and Processing, 684 (IF-3.094). pp. 683-696.

H

Hazra, A and Hossain, S M and Pramanick, A K and Ray, M (2017) Gold-silver nanostructures: Plasmon-plasmon interaction. Vacuum, 146 (IF- 1.530). pp. 437-443.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2017) An adaptive neuro-fuzzy inference systembased modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking, 44(9) (IF-0.985). pp. 656-665.

Husain, M M and Sarkar, R and Pal, T K and Ghosh, M and Prabhu, N (2017) Quantification of Microtexture at Weld Nugget of Friction Stir-Welded Carbon Steel. Journal of Materials Engineering and Performance , 26(5) (IF-1.331). pp. 2047-2056.

J

Jena, P S M and Rai, R K and Roy, P K and Sahu, J K (2017) Role of internal oxidation and iron penta carbonyl formation on creep life of 9Cr-1Mo steel. Materials at high temperatures, 34(4) (IF-0.0802). pp. 239-249.

Jena, P S M and Rai, R K and Sahu, J K (2017) Improvement of toughness of high chromium white cast iron: duplex ferritic-austenitic matrix. Materials Science and Technology, 34(3) (IF-2.764). pp. 299-304.

Joshi, Akashy J and Singh, Rajkumar P and Hosmani, Santosh S (2017) Microstructure evolution in boronized inconel 718 superalloy. Journal of Metallurgy and Materials Science, 59(1) . pp. 11-21.

K

Kamaraj, A and Hore, S and Sathyamoorth, P (2017) Estimation and Analysis of Excess Oxygen Input into Ladle During Liquid Steel Tapping. Transactions of the Indian Institute of Metals, 70(9) (IF-0.533). pp. 2465-2476.

Kamaraj, A and Mandal, G K and Minj, R K and Misra, S and Bandyopadhyay, D (2017) Characterization and Evolution of Non-metallic Inclusions in Fe–Al–Si–O System. Transactions of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1887-1899.

Krishna, K Gopala and Das, Goutam and Venkateswarlu, K and Kumar, K C Hari (2017) Studies on Aging and Corrosion Properties of Cryorolled Al–Zn–Mg–Cu (AA7075) Alloy. Transactions of the Indian Institute of Metals, 70(3) (IF-0.533). pp. 817-825.

Kumar, Nitesh and Kumar, Binay and Pathak, L C (2017) Effect of shapes and compositions of spark plasma sintered ZrB -C composites on performance as EDM 2 tools. Journal of Metallurgy and Materials Science, 59(4) . pp. 143-152.

Kumar, P and Kumar, Rakesh and Rai, B and Subramanian, S and Srikanth, S (2017) Preface. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 251-252.

Kumar, P and Mondal, A K and Ghosh Chowdhury, S and Krishna, G and Ray, A K (2017) Influence of additions of Sb and/or Sr on microstructure and tensile creep behaviour of squeeze-cast AZ91D Mg alloy. Materials Science and Engineering A-Structural Materials Properties Micro-structure and Processing, 683 (IF-3.094). pp. 37-45.

Kumar, Sanjay and Mucsi, G and Kristaly, Ferenc and Pekker, P (2017) Mechanical activation of fly ash and its influence on micro and nano-structural behaviour of resulting geopolymers. Advanced Powder Technology, 28(3) (IF-2.659). pp. 805-813.

Kumar, Sunil (2017) Graphene engendered 2-D structural morphology of aluminium atoms: Molecular dynamics simulation study. Materials Chemistry and Physics, 202 (2.084). pp. 329-339.

Kumar, Sunil and Srivastava, V C and Mandal, G K and Pattanayek, S K and Sahoo, K L (2017) Single-Walled Carbon Nanotube Engendered Pseudo-1D Morphologies of Silver Nanowire. Journal of Physical Chemistry C, 121 (IF-4.536). pp. 20468-20480.

Kumari, Aayushi and Kedia, Priyanshu and Mandal, Eisha and Mandal, S K (2017) Flaw patterns characterization in material images using linear coorelation method. Journal of Metallurgy and Materials Science, 59(2) . pp. 67-74.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2017) Data-driven modeling of fireside corrosion rate. Anti-corrosion methods and materials, 64(4) (IF-0.364). pp. 397-404.

Kumari, D and Sheikh, L and Bhattacharya, S and Webster, T J and Nayar, S (2017) Two-dimensional collagen-graphene as colloidal templates for biocompatible inorganic nanomaterial synthesis. International Journal of Nanomedicine, 12 (IF-4.300). pp. 3605-3616.

M

Mahato, B and Sahu, T and Shee, S K and Sahu, P and Sawaguchi, Takahiro and komi, J and Karjalainen, L P (2017) Simultaneous twinning nucleation mechanisms in an Fe–Mn–Si–Al twinning induced plasticity steel. Acta Materialia, 132 (IF-5.301). 264-275.

Mallik, Manab and Kailath, A J and Ray, K K and Mitra, R (2017) Effect of SiC content on electrical, thermal and ablative properties of pressureless sintered ZrB2-based ultrahigh temperature ceramic composites. Journal of the European Ceramic Society, 37(2) (IF-3.411). pp. 559-572.

Mamgain, Anubhuti and Upadhyay, Trilok Chandra (2017) Study of dielectric constant and loss tangent in potassium dihydrogen phosphate crystal. Journal of Metallurgy and Materials Science, 59(2) . pp. 59-66.

Mandal, G K and Rajnikanth, V and Kumar, S and Mishra, D and Misra, S and Srivastava, V C and Ghosh Chowdhury, S (2017) Microstructure Evolution During Hot Deformation of a Micro-Alloyed Steel. Transactions of the Indian Institute of Metals, 70(4) (IF 0.533). pp. 1019-1033.

Manivel, P (2017) A comparative study on the inhibitive effect of parasubstituted anilines on corrosion of iron in 1M HCI solutions. Journal of Metallurgy and Materials Science, 59(1) . pp. 39-47.

Mehta, Nirajkumar C and Shukla, Dipesh D (2017) Stress life analysis of induction furnace wall for magnesia ramming mass. Journal of Metallurgy and Materials Science, 59(2) . pp. 85-101.

Metya, Avijit Kumar and Bar, H N and Tarafder, Soumitra and Balasubramaniam, Krishnan (2017) Nonlinear Lamb wave for the assessment of ratcheting behavior in IF steel. Journal of Non Destructive Testing & Evaluation, 15/10 .

Metya, Avijit Kumar and Tarafder, S and Balasubramaniam, Krishnan (2017) Characterization of Tempering Behaviour of Modified 9Cr-1Mo Steel by Ultrasonic Lamb wave Mixing. In: 2nd International Conference on Emerging Materials: Characterization and Application (EMCA-2017), March, 2017, NIT, Durgapur.

Mishra, D and Sinha, S and Sahu, K K and Agrawal, A and Kumar, R (2017) Recycling of Secondary Tungsten Resources. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 479-485.

Mishra, G and Chandan, A.K. and Kundu, S (2017) Hot rolled and cold rolled medium manganese steel: Mechanical properties and microstructure. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 701 (IF-3.094). pp. 319-327.

Mishra, Suman K and Kumari, Swati (2017) Development of hard and optically transparent Al-Si-N nanocomposite coatings. Surface and Interface Analysis, 49(4) (IF-1.132). pp. 345-348.

Mittal, M and Nanda, T and Kumar, B Ravi and Singh, V (2017) Effect of inter-critical annealing parameters on ferrite recrystallization and austenite formation in DP 590 steel. Journal Materials and Manufacturing Processes , 32(11) (IF-2.274). 1231-1238 .

Mohanty, Sunati and Nayak, B and Konar, J (2017) Beneficiation of High-alumina Bearing Iron-ore Slime: A Case Study From Eastern India. Journal Mineral Processing and Extractive Metallurgy Review , 38(6) (IF- 1.219). pp. 403-410.

Murugesan, A P and Rajnikanth, V and Mahato, B and Wegner, Matthias and Witte, M and Wilde, G and Ghosh Chowdhury, S (2017) Concurrent precipitation and associated texture evolution in AA 6082 alloy during high pressure torsion (HPT) processing. Materials Science and Engineering: A, 700 (IF-3.094). 487-494.

N

Nanda, T and Kumar, B Ravi and Singh, V (2017) A Simplified Micromechanical Modeling Approach to Predict the Tensile Flow Curve Behavior of Dual-Phase Steels. Journal of Materials Engineering and Performance, 26(1) (IF-1.331). pp. 5180-5187.

Nanda, T and Ravi Kumar, B and Sharma, S and Singh, V and Pandey, O P (2017) Effect of thermal cycling process parameters on recrystallization kinetics for processing of fine-grained pure copper. Materials and Manufacturing Processes, 32(1) (IF-2.274). pp. 34-43.

Nath, S K and Rajshekhar, Y and Alex, T C and Venugopalan, T and Kumar, Sanjay (2017) Evaluation of the Suitability of Alternative Binder to Replace OPC for Iron Ore Slime Briquetting. Transactions of the Indian Institute of Metals, 70(8) (IF- 0.533). pp. 2165-2174.

Nayak, B and Meyer, Franz Michael (2017) Manganilmenite in the magnetite ore body from Pokphur area of Nagaland, North East India and the possibility of microdiamonds in the ophiolites of Indo-Myanmar ranges. Current Science, 112(1) (IF-0.843). pp. 155-160.

Nivas, R and Das, Goutam and Das, S K and Mahato, B and Kumar, Sanjay and Sivaprasad, K and Singh, P K and Ghosh, M (2017) Effect of Stress Relief Annealing on Microstructure & Mechanical Properties of Welded Joints Between Low Alloy Carbon Steel and Stainless Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 48 A(1) (IF-1.874). pp. 230-245.

Nivas, R and Singh, P K and Das, Goutam and Das, S K and Kumar, S and Mahato, B and Sivaprasad, K and Ghosh, M (2017) A comparative study on microstructure and mechanical properties near interface for dissimilar materials during conventional V-groove and narrow gap welding. Journal of Manufacturing Processes, 25 (IF-2.322). pp. 274-283.

P

Pal, J and Ghorai, S and Ammasi, A and Hota, S K and Koranne, V M and Venugopalan, T (2017) Improving reductibility of iron ore pellets by optimization of physical parameters. Journal of Mining and Metallurgy Section B- Metallurgy, 53(1) (IF-0.804). pp. 37-46.

Parmar, Kavita and Bhattacharjee, S (2017) Energetically benign synthesis of lanthanum silicate through "silica garden" route and its characterization. Materials Chemistry and Physics, 194 (IF-2.084). pp. 147-152.

Parthiban, R and Ghosh Chowdhury, S and Hari Kumar, K C and Sankaran, S (2017) Evolution of microstructure and its influence on tensile properties in thermo-mechanically controlled processed (TMCP) quench and partition (Q&P) steel. Materials Science and Engineering: A, 705 (IF- 3.094). pp. 376-384.

Patra, A S and Gogoi, Gaurangi and Sahu, Ranjan K and Qureshi, M (2017) Modulating the electronic structure of lanthanum manganite by ruthenium doping for enhanced photocatalytic water oxidation. Physical Chemistry Chemical Physics, 19(19) (IF-4.123). pp. 12167-12174.

Paul, Surajit Kumar and Kumar, Sunil and Tarafder, S (2017) Effect of loading conditions on nucleation of nano void and failure of nanocrystalline aluminum: An atomistic investigation. Engineering Fracture Mechanics, 176 (IF-2.151). pp. 257-262.

Paul, Surajit Kumar and Roy, Satish and Sivaprasad, S and Bar, H N and Tarafder, S (2017) Local Ratcheting Response in Dissimilar Metal Weld Joint: Characterization Through Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 26(10) (IF-1.331). pp. 4953-4963.

Prakash, Amit and Bar, H N and Sivaprasad, S and Tarafder, S and Dwivedi, J P (2017) The Effect of Residual Stress on Fatigue crack growth rate in AISI 304LN Stainless Steel. Materials Today: Proceedings, 4(2) . pp. 677-686.

R

Rai, R K and Sahu, J K and Jena, P S M and Das, Swapan K and Paulose, N and Fernando, C D (2017) High temperature tensile deformation of a directionally solidified nickel base superalloy: Role of micro constituents. Materials Science and Engineering A, 705 (IF-3.094). pp. 189-195.

Ranjan, Rajiv and Das, T K and Munda, B N S and Mandal, Eisha (2017) Development of sensor based on GMI effect for structural health monitoring of engineering component. Journal of Metallurgy and Materials Science, 59(1) . pp. 23-27.

Rao, Govinda R and Sahoo, K L and Ganguly, R I and Dash, R R and Narasaiah, N (2017) Effect of Flyash Treatment on the Properties of Al-6061 Alloy Reinforced with SiC–Al2O3–C Mixture. Transactions of the Indian Institute of Metals, 70(10) (IF-0.533). pp. 2707-2717.

Ravi Kumar, B and Patel, N K and Mukherjee, K and Walunj, Mahesh and Mandal, G K and Venugopalan, T (2017) Ferrite channel effect on ductility and strain hardenability of ultra high strength dual phase steel. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 685 (IF-3.094). pp. 187-193.

Ray, Ashok K and Goswami, B (2017) Stiffness in materials engineering. Journal of Metallurgy and Materials Science, 59(2) . pp. 75-83.

S

Sahu, M K and Swaminathan, J and Bandyopadhyay, N R and Sagar, S P (2017) Effect of Precipitation Morphology on the Second Harmonic Generation of Ultrasonic Wave During Tempering in P92 Steel. Journal of The Institution of Engineers (India): Series D, 98(2) . pp. 211-217.

Sahu, M K and Swaminathan, J and Bandyopadhyay, N R and Sagar, S P (2017) Rayleigh Surface wave based non linear ultrasound to assess effect of precipitation hardening during tempering in P92 steel. Materials Science and Engineering: A, 703 (IF- 3.094). pp. 76-84.

Sahu, Minati Kumari and Dutta, Chandan and Ghosh, Arpita and Palit Sagar, S (2017) A Digital Image Processing Tool for size and number density distribution of precipitates in creep exposed material. In: Soft computing for problem solving (SOCPROS 2017), 23-24th December 2017, IIT Bhubaneswar.

Saini, P K and Ahliwat, D S and Singh, D (2017) Study of electronic structure and optical properties of zinc-blende and rocksalt structures of HgSe : A DFT study. Journal of Metallurgy and Materials Science, 59(1) . pp. 29-37.

Sameer, Kumar D and Suman, K N S and Sasanka, Tara C and Ravindra, K and Poddar, Palash and Venkata , Siva S B (2017) Microstructure, mechanical response and fractography of AZ91E/Al2O3 (p) nano composite fabricated by semi solid stir casting method. Journal of Magnesium and Alloys, 5(1) (IF- ). pp. 48-55.

Sarkar, C and kumari, Pushpa and Anuvrat, K and Sahu, S K and Chakraborty, Jui and Garai, Subhadra (2017) Synthesis and characterization of mechanically strong carboxymethyl cellulose–gelatin–hydroxyapatite nanocomposite for load-bearing orthopedic application. Journal of Materials Science, 53(1) (IF- 2.599). pp. 230-246.

Sharma, Sweta and Khan, Soib and Ranjan, Rajiv and Choudhary, R N P (2017) Analysis of impedance and electric modulus properties of sensing and transducing material lead zirconate titanate (PZT) ceramics doped with gadolinium. Journal of Metallurgy and Materials Science, 59(2) . pp. 49-58.

Shekhar, Saurabh and Mishra, D and Agrawal, A and Sahu, K K (2017) Physical and chemical characterization and recovery of potash fertilizer from glauconitic clay for agricultural application. Applied Clay Science, 143 (IF-3.101). pp. 50-56.

Shibe, Vineet and Chawla, Vikas (2017) Enhancement in wear resistance by depositing Fe-C-Cr based hardfacing alloys on ASTM A36 steel. Journal of Metallurgy and Materials Science, 59(1) . pp. 1-9.

Singh, Brijpal (2017) Correlation of inclusion characteristics and microstructure with mechanical properties in low carbon steel weldments. Journal of Metallurgy and Materials Science, 59(3) . pp. 117-125.

Singh, Virendar and Adhikary, M and Venugopalan, T and Chakraborty, A and Nanda, T and Kumar, B Ravi (2017) Role of recrystallization and pearlite dissolution in industrial processing of DP590 steels. Materials and Manufacturing Processes, 32(16) (IF-2.274). pp. 1806-1816.

Srivastava, V C and Bolfarini, C (2017) Spray forming of novel materials. In: Metal Sprays and Spray Deposition. Springer, pp. 521-561. ISBN ISBN 978-3-319-52687-4

Srivastava, V C and Mandal, G K and Ciftci, N and Uhlenwinkel, V and Madler, L (2017) Processing of High-Entropy AlCoCr0.75Cu0.5FeNi Alloy by Spray Forming. Journal Of Materials Engineering And Performance, 26/12 (IF- 1.331). pp. 5906-5920.

V

Varshney, A and Sangal, S and Gouthama, and Pramanick, A K and Mondal, K (2017) Microstructural evidence of nano-carbides in medium carbon high silicon multiphase steels. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 708 (IF-3.094). pp. 237-247.

This list was generated on Thu Oct 1 12:26:44 2020 IST.