Items where Year is 2025

Arif , Sk Md and Bar, H.N and Kumar Sahoo, Biraj and Chaudhary, Chandan and Mandal, D. (2025) Effect of Quench and Partitioning Treatment on Microstructure, Tensile Properties, and Low Cycle Fatigue Behavior of Low-Carbon High Strength Steel. Journal of Materials Engineering and Performance .

Badkoobeh, Farzad and Raygan, Shahram and Rassizadehghani, Jafar and Kwak, Tae-Yang and Hwan Kim, Bong and Kumar Chandan , Avanish and Kumar Bansal, Gaurav (2025) Unraveling the role of subcritical annealing time before intercritical annealing of a cold-worked Ni-Cr-Mo-V alloy steel: Phase transformations and mechanical properties. Journal of Alloys and Compounds .

Bharti, Adarsh and Maharaja, Hitarth and Mishra, Sushil and Sivaprasad, S and Bhattacharyya , Abir (2025) Effect of strain amplitude on low-cycle fatigue behavior of an alpha Cu-Zn alloy. Materials Today Communications .

Chaithanya, P.V.S. and Jena, P.S.M and Pradhan, S.K and Singh, Raghuvir and Sahu, J.K. (2025) Influence of γ'-Ni3(Al, Ti) precipitate morphology and lattice misfit on the oxidation behavior of Ni-based superalloy IN740H. Corrosion Science .

W. Aldbea , Ftema and Va’zques- Va’zquez, C. and Abobaker , M.A and Alsteeni , A.Y and Saad, A. and Sharma, A. and K. Singh, Pramod and Diantoro, Markus and May, M. and Abdullah, T. and Edhirej, A. and Aldosari, S.M. and Kraini , M. (2025) Structural and optical properties of α aluminum oxide prepared by sol-gel method. Current Applied Physics .

A

Abhilash, and M. Maheswari, Uma and Reddy, Kakarla Raghava and Aminabhavi, Tejraj M. and Aravindan, Vanchiappan and Meshram, Pratima (2025) Recycling strategies for renewable graphite and other carbon nanomaterials from used batteries: A review. Journal of Cleaner Production, 493 (9.8). pp. 1-20.

Alex, T C and Kailath, A J and Kumar, Rakesh (2025) Influence of mechanical activation on boehmite (γ-AlOOH) to γ-Al2O3 transformation: differential scanning calorimetric (DSC) analysis. Journal of Alloys and Compounds, 1037 . p. 182083.

Alex, T C and Singla, Rashmi and Sahoo, D P and Mehta, K D and Kumar , Sanjay (2025) Avenues of resources efficiency enhancement in iron and steel production. Minerals Engineering, 222 .

Ammasi, A and Prasad, Anil and Kumar, Sanjay (2025) Tailoring of Solidification and Crystallization Behavior of Blast Furnace Slag for Developing Glass-Ceramics During Melt Cooling. Journal of Sustainable Metallurgy .

Andavarapu, Mohana Rao and Sahoo, Monica and Kumar Swain, Ajit and Kumar, Abhishek (2025) Washability assessment of Indian coking coal for optimized beneficiation and sustainable utilization. International Journal of Coal Preparation and Utilization .

Anuraag, N S and Kumar, U and Pradhan, S and Shaw, S K and Sharma, A and Prasad, N K (2025) Rhombohedral phase high-entropy alloy of AlMnCuZnBi as a photo-Fenton catalyst for methyl orange degradation. Journal of Alloys and Compounds, 1010 .

Ayyandurai, Ammasi and Pal, Jagannath (2025) Utilisation of Jhama coal as a carbon source in hematite ore pelletising. Canadian Metallurgical Quarterly .

Ayyandurai, Ammasi (2025) Double slag practice for refining of steel in MgO-lined induction furnace. CANADIAN METALLURGICAL QUARTERLY .

B

Bagui, Sumanta and Veer Singh, Chandra and Mahato, Bhupeshwar and Vijay , R. (2025) Creep deformation behavior of an oxide dispersion strengthened modified iron aluminide alloy. Intermetallics .

Banerjee, Taniya and Kundu, Rajen (2025) Compatibility of Li Alloy Anodes with Solid-State Electrolytes: An Evaluation. ACS Applied Energy Materials .

Behera, Gautam and Kumar Kar, Manish and Chakladar, Saswati and Rao Borra, Chenna and Ali Recai Önald, Mehmet (2025) Recovery of alumina and soda from a titanium-rich bauxite residue: a phase evolution study. CANADIAN METALLURGICAL QUARTERLY .

Bharti , Adarsh and dey, Rima and Sivaprasad , S. and Tarafder, S. and Bhattacharyya, Abir (2025) Deformation response and microstructure evolution in 304LN stainless steel subjected to multiaxial fatigue loading under different strain paths. International Journal of Pressure Vessels and Piping .

C

Cassandra Austen, I and Chennakesavulu, K and Gharai, Mousumi and Vasumathi, N and Kumari, Ajita and Ramanjaneya Reddy, G and Vijaya Kumar, T V (2025) Process upgradation and kinetic modeling of high-ash non-coking coal flotation using bio-based collector for enhanced clean coal recovery. INTERNATIONAL JOURNAL OF COAL PREPARATION AND UTILIZATION (2).

Chakladar, S and Banerjee, Riya and Mohanty, Ashok and Chattopadhyay, S K and Chakravarty, S (2025) Extractability and occurrence of rare earth elements in bottom ash through sequential leaching and pre-treatment. Energy Sources Part A-Recovery Utilization and Environmental Effects, 47(1) . pp. 10-20.

Chandan, A K and Sahoo, Biraj K and Bansal, G K and Ghosh, M (2025) Root Cause Analysis for the Failure of an Air Compressor Impeller. Transactions of the Indian Institute of Metals, 78(1) .

Charan Arohi, Adya and Nayak, Priyadarshini and Kumar Punyamanthula, Kranti and Ramesh, Surla and Tarafder, Soumitra and Frenzel, Jan and Sen, Indrani (2025) Processing-microstructure-functional properties correlation for NiTi-based pseudoelastic shape memory alloy. Journal of Material Science .

D

Das, T K and Dutta, C and Das, P K and Rajput, R and Bhakat , N K and Bhave, K and Sagar, Sarmishtha Palit (2025) Real-Time In-Process Measurement and Control of Zinc Coating Weight: Assessing Eddy Current Sensor Proficiency in Industrial Applications. IEEE Sensors Journal, 25(1) . pp. 1527-1534.

G

Gharai, Mousumi and Cassandra Austen, I and Kumari, Ajita and Vasumathi, N and Vijaya Kumar, T V (2025) Optimisation of process parameters for coal flotation using statistical technique. Disaster Advances .

K

Kailath, A J and Kumar, Krishna and Kumar, Roshan and Kumar, Nikhil and Gour, Kuldeep Singh and Randhawa, Navneet Singh and Singh, Priyanka and Rao, K Sudhakar (2025) Study research protocol for Phenome India-CSIR Health Cohort Knowledgebase: A prospective multi-modal follow-up study on a nationwide employee cohort. Biology Methods and Protocols, 10(1) . bpaf061 .

Kumar, Amit and Guguloth, K and Pandey, S M and Sirohi, S and Swierczynska, A and Fydrych, D and Pandey, Chandan (2025) Microstructure degradation and creep failure study of the dissimilar metal welded joint of heat-resistant steel and Inconel 617 alloy tested at 650 °C and applied stress range of 100-150 MPa. International Journal of Pressure Vessels and Piping, 214 .

Kumar, Arun and Kumar, Sunil and Kumar, Ashok and Sharma, Sanjay (2025) Prediction of creep degradation in Fe-Cr-Ni single-crystal alloys for high-temperature applications: a molecular-dynamics and machine-learning approach. Mechanics of Time-Dependent Materials, 29(1) .

Kumar, P and Chakravarty, S and Majumder, A K (2025) Relationship between petrological characteristics and gross calorific value of coal. Fuel, 380 .

Kumar, Sunil and Kumar, Arun and Kumar, Ashok (2025) Nanostructure Evolution and Rupture Mechanisms in Layered Fe-Cr-Ni Alloy under Multiaxial Tensile Deformation: A Molecular Dynamics Study. Journal of Materials Engineering and Performance .

Kumar, Sunil and Sahu, Ranjan K (2025) External Electric Field Induced Atomic Charge Migration and Surface Degradation of CsPbI3: A Reactive Molecular Dynamics Simulation based study. Material Chemistry and Physics , 333 .

M

Md Arif, Sk and Nandan Bar, Himadri and Ghosh, Mainak and Hazra, Biplab and Ghorai, Satadal and Mandal, Durbadal (2025) Impact of Quenching and Partitioning Time on Microstructures, Mechanical and Fatigue Properties of High-Strength Steel. Transactions of the Indian Institute of Metals .

Meshram, Pratima and Agarwal, Nikita and Abhilash, (2025) A review on assessment of ionic liquids in extraction of lithium, nickel, and cobalt vis-`a-vis conventional methods. RSC Advances (Royal society of Chemistry) , 15 (3.9). pp. 8321-8334.

Moususmi, Das and Suranjit, Kumar and PK , Singh and M, Ghosh (2025) Correlating Microstructure with Mechanical Properties for Different Regions of Dissimilar Metal-Welded Joints. J of Materials Engg. & Performance (2.2).

P

Pradhan, Padmapani and Dey, Shaon and Manna, K and Panda, A B and Pal, Sagar (2025) In situ synthesis of a photocatalyst using TiO2 QDs-immobilized functionalized galactomannan for degradation of organic pollutant. Journal of Water Process Engineering, 69 .

R

Rao Andavarapu, Mohana and Prasad, Ranjit (2025) Efficient beneficiation of difficult-to-wash Indian low volatile coking coal fines through Magotteaux flotation. International Journal of Coal Preparation and Utilization .

Roy, Rajat K and Murugaiyan, Premkumar and Sahoo, Biraj K. and Kurapati, Gopala Krishna and Panda, Ashis K. and Dubey, Paritosh and Mishra, Durgamadhab (2025) Impacts of powder size on amorphous-crystalline transition behaviours in gas atomized Fe-rich alloy powders. Powder Technology , 464 (4.6). p. 121199.

Roy, Rajat K and Sahu, Rakesh and Murugaiyan, Premkumar and Kurapati, Gopala Krishna and Panda, Ashis K. (2025) Structural and thermal behaviors of iron‑based gas‑atomized powders. Journal of Thermal Analysis and Calorimetry, Online (3.1).

S

Sahoo, M and Chalavadi, G (2025) Mineralogical and thermal investigation of iron ore concentrate and tailing, processed using an Airtable. Canadian Metallurgical Quarterly .

Salot, M and Santhy, K and Naganabonia, V R and Singh, S G and Pramanick, A K and Mandal , D and Avasthi, G and Chaudhary, S K (2025) On improved inorganic gas-sensing characteristics of microwave-treated tungsten oxide quantum dots at room temperature. International Journal of Applied Ceramic Technology .

Sukhbaatar, T and Piton, R and Giusti, F and Arrachart, G and Duvail, M and Kumari, Aarti and Daware, S and Gupta, Shally and Goverapet, S and Sahu, S K and Rai, Beena and Pellet-Rostaing, S (2025) Lipophilic EDTA-based ligands in different diluents for the extraction of rare earths: Preliminary results with Nd(III), Dy(III) and Pr(III) in chloride and nitrate media. Hydrometallurgy, 231 .

V

Vasumathi, N and Gharai, Mousumi and Kumari, Ajita and Vijaya Kumar, T V (2025) Recovery of calcite using eco-friendly bio-collector in the flotation of low-grade limestone. Disaster Advances .

Vasumathi, N and Kumari, Ajita and G., Raam Kumar and K., Chennakesavulu and G., Ramanjaneya Reddy and Gharai, Mousumi and Vijaya Kumar, T V (2025) Pyrolysis oil from polypropylene packaging waste: a sustainable waste‑to‑resource approach for non‑coking coal flotation. Chemical Papers (2.5).

W

Walunj, Mahesh G (2025) Hot dip galvanization of DP 980 steel sheet using iron based sol pre-layer and its corrosion performance. Surface and Coatings Technology (6.1).

Walunj, Mahesh G (2025) Modulation of brittle phases in advanced hot dip Zn-Al-Mg-Ni alloy coating on DP980 steel for improved cracking and corrosion resistance. Surface and Coatings Technology (6.1).

Walunj, Mahesh G (2025) Superhydrophobic galvannealed coating on DP980 steel by in-situ generation of Zn-Fe-Ti intermetallic phases: A new approach. Surface and Coatings Technology (6.1).