Items where Year is 2024

Annual Reports

Director, NML and RPBD, NML (2024) CSIR-NML Annual Report 2023-2024. CSIR-NML, Jamshedpur, Jamshedpur. ISBN 0972-4273

Article

Abhilash, and Srivastava, S K and Rahman, M R and Meshram, Pratima (2024) Red Mud Neutralisation by CO2 Promotes Alkali Recovery and Higher Scandium Extraction. Waste and Biomass Valorization .

Aldbea, F W and Vazquez, C V and Othman, U A and Sharma, A and Boukhachemd, A and Mailoude, O M and Kraini, M and Singh, P K (2024) Structural and optical properties of Iodine doped zinc oxide nanoparticles. Journal of Materials Science-Materials in Electronics, 35(7) .

Ambashta, R D and Alex, T C and Single, R and Sahoo, D P and Sarkar, P S and Bajpai, R K and Shivakumar, Y C and Manohar, S and Kumar , Sanjay (2024) Evaluation of Different Fly Ash-Blast Furnace Slag Formulations for Design of Geopolymers in Radioactivity Disposal Applications. Transactions of The Indian Ceramic Society, 83(3) . pp. 178-187.

Ammasi, A and Karthik, P M R and Vishal, D (2024) Slag-Metal- Refractory Interactions During Dissolution of Hydrogen-Based Directly Reduced Iron (H-DRI) in Liquid Iron Melt. Journal of Sustainable Metallurgy .

Ammasi, A and Pal, J and Pal, Jagannath and Ammasi, Ayyandurai (2024) Use of Additives as Internal Heat Sources in Hematite Ore Pellets- A Review. Mineral Processing and Extractive Metallurgy Review, online (4.5).

Austen, I C and Chennakesavulu, K and Reddy, G J and Vasumathi, N and Kumari, Ajita and Gharai, Mousumi and Kumar, T A and Kumar, T V Vijaya (2024) Utilizing a sustainable surfactant from Cucurbita pepo seeds for eco-friendly flotation of non-coking coal in sustainable energy applications. Biomass Conversion and Biorefinery .

Balusamy, T and Sathyaraj, P M and Ravichandran, K and Narayanan, T S N S (2024) Influence of Surface Mechanical Attrition Treatment Parameters on the Residual Stress of EN8 Steel. Journal of Materials Engineering and Performance .

Banerjee, Riya and Chakladar, S and Chattopadhyay, S K and Chakravarty, S (2024) A comparative study on the association and extractability of rare earth elements from laboratory ash, bottom ash, fly ash: A perspective on Indian coals. Minerals Engineering, 213 .

Banerjee, Taniya and Kundu, Rajen (2024) Mini-Review on Organic Electrode Materials: Recent Breakthroughs and Advancement in Metal Ion Batteries. Energy & Fuels, 34(14) . pp. 12487-12509.

Banerjee, Taniya and Kundu, Rajen (2024) Outlook of Solid-State Electrolytes: A Boost in Next-Generation Li-Metal-Based Solid-State Batteries. Energy & Fuels, 38(21) . pp. 20084-20111.

Bhattacharya, Ankita and Bark, R K and Ghosh, Abhijit and Patra, Sudipta and Sen, Mainak and Das, Anindya and Mitra, Rahul and Chakrabarti, D (2024) Relative influence of microsegregation and structural unit size on the strength-impact toughness properties of an armor grade steel. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 901 .

Bhattacharya, Ankita and Biswal, S and Barik, R K and Mahato, B and Ghosh, M and Mitra, Rahul and Chakrabarti, Debalay (2024) Comparative interplay of C and Mn on austenite stabilization and low temperature impact toughness of low C medium Mn steels. Materials Characterization, 208 .

Cassandra Austen, I and Chennakesavulu, K and Reddy, G R and Vasumathi, N and Kumari, Ajita and Gharai, Mousumi and Kumar, T A and Vijaya Kumar, T V (2024) Utilizing a sustainable surfactant from Cucurbita pepo seeds for eco‑friendly flotation of non‑coking coal in sustainable energy applications. Biomass Conversion and Biorefinery .

Chaurasia, P K and Barik, B K and Das, A and Goecke, S F and De, A (2024) Probing dimensional consistency during multi-track multi-layer gas metal arc directed energy deposition of aluminium alloys. Welding in the World .

Chaurasia, P K and Barik, B K and Das, Atanu and De, A (2024) Evaluating porosity formation in gas metal arc directed energy deposition of an aluminium alloy. Science and Technology of Welding and Joining .

Choudhury, A S R and Kumar, Sudhir and Gupta, N and Jana, Animesh and Bhattacharya, P (2024) Mechanochemically Assisted Microwave-Induced Plasma Synthesis of a N-Doped Graphitic Porous Carbon-Based Aqueous Symmetric Supercapacitor with Ultrahigh Volumetric Capacitance and Energy Density. ACS Applied Electronic Materials .

Dak, G and Guguloth, K and Sirohi, S and Adin, M S and Pandey, Chandan (2024) Creep and High-Temperature Tensile Deformation Behavior of the TIG Welded P92/304L Dissimilar Steel Weld Joints. Journal of Materials Engineering and Performance .

Dak, G and Guguloth, K and Vidyarthy, R S and Fydrych, D and Pandey, C (2024) Creep rupture study of dissimilar welded joints of P92 and 304L steels. Welding in the World .

Das, Abhijit and Jana, Animesh and Das, D and Biswas, S and Seshadri, H and Rao, M S and De, Srishendu (2024) Efficient Adsorption and Desorption of Uranium(VI) Using a Polymeric Adsorbent: A Combined Theoretical and Experimental Approach with Real-Life Alkaline Leach Liquor. Industrial & Engineering Chemistry Research, 63(13) . pp. 5845-5862.

Das, Somnath and Mahato, D K and Panda, A K (2024) Impact of thermally induced stress gradient on magneto-impedance sensitivity of As-quenched and Joule annealed microwires. Journal of Magnetism and Magnetic Materials, 599 .

Das, T and Kumar, B Ravi and Sahoo, Biraj K and Roy, Himadri and Lohar, A K and Samanta, S K and Ghosh, Kunal (2024) Implementation of different scanning strategy to improve the mechanical and wear properties of 15-5 PH stainless steel fabricated by laser-directed energy deposition. Materials Today Communications, 38 .

Das Chakraborty, S and Kumar, U and Bhattacharya, P and Mishra, T (2024) Tailoring of Visible to Near-Infrared Active 2D MXene with Defect-Enriched Titania-Based Heterojunction Photocatalyst for Green H2 Generation. ACS Applied Materials & Interfaces, 16(2) . pp. 2204-2215.

Dey, I and Saha, R and Mahato, B and Ghosh, M and Ghosh Chowdhury, S (2024) Effect of Quenching and Partitioning on Microstructure and Mechanical Properties of High-Carbon Nb Microalloyed Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science .

Dipali, Dipali and Krishna, Ram and Ghosh, Somesh and Sahu, S K and Sinha, Shivendra and Prasad, Ranjit (2024) An experimental investigation and predictive modeling using machine learning technique for reclamation of metal values from scrap NdFeB magnets. Journal of Industrial and Engineering Chemistry, 139 . pp. 390-400.

Gaikwad, M A and Burungale, V V and Gavali, D S and Malavekar, B D and Park, S W and Zheng, F and Jang , S and Gour, K S and Cruz, M R A and Kim, J H (2024) Solar-driven methanol to formate conversion coupled with energy-efficient hydrogen production through Cr dopant-induced charge transfer modulation at the in-situ formed FeOOH/FeCo-LDHs interface. Chemical Engineering Journal, 498 .

Gotgi, N M and Singh, R J and Giri, A K and Panda, A B and Ghosh, D (2024) ZnO Nanorod: An Efficient Reusable Catalyst for One-pot Multicomponent C-C Bond Formation Reactions Involving Isatins. Asian Journal of Organic Chemistry .

Gour, K S and Pawar, P S and Lee, M and Karade, V C and Yun, J S and Heo, J and Park, J and Yun, J H and Kim, J H (2024) Fostering Charge Carrier Transport and Absorber Growth Properties in CZTSSe Thin Films with an ALD-SnO2 Capping Layer. ACS Applied materials & Interfaces .

Greifzu, G and Alex, T C and Kailath, A J and Senna, Mamoru and Stelter, Ing. Michael and Kumar, Rakesh (2024) Influence of Genesis on Mechanochemical Activation and Reactivity of Boehmite Prepared by Thermal and Hydrothermal Transformation of Gibbsite. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science .

Grubert, E and Lazaro, L L B and Merfort, L and Popp, A and Luo, T Y and Kati, V and Meshram, Pratima and Dorn, F M and Hernandez, D (2024) Making low-carbon energy sustainable. Our Earth, 7(2) . pp. 163-166.

Gupta, Aman and Kumar, R and Kaushik, L and Shukla, S and Tandon, V and Choi, S H (2024) Microstructure and Texture Evolution in Thermomechanically Processed FCC Metals and Alloys: a Review. Korean Journal of Metals and Materials, 62(7) . pp. 564-592.

Hussain, Raja Rizwan and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N and Ahmed, M (2024) Synergistic protection of borate and silicate salts composite for controlling the chloride-induced pitting and uniform corrosion of steel reinforcement bars embedded in mortars. Scientific Reports, 14(1) .

Jena, P S M and Sahu, J K and Tripathy, S and Pradhan, S K and Mahato, B and Paulose, N (2024) Influence of texture on anomalous yielding behavior of thermomechanically processed nickel-based superalloy 720Li. Acta Materialia, 281 .

Jha, Annapurna and Chakladar, S and Patra, D and Chakravarty, S (2024) Study of mineralogy and distribution of rare earth elements in coal block of Eastern Coalfield, India. International Journal of Coal Preparation and Utilization .

Jyothilakshmi, S and Meshram, Pratima and Abhilash, and Lee, Y S and Aravindan, V (2024) Graphite from Dead Li-Ion Batteries: A "Powerful" Additive for Fabrication of High-Performance Li-Ion Capacitors. Advanced Materials Technologies, 9(7) .

Kalshyan, R K and Mohanasundaram, M and Chowdhury, G M and Ghorai, S (2024) Synthesis of calcium ferrite using microwave susceptor heating. Canadian Metallurgical Quarterly .

Kar, Shubhada and Bagui, Sumanta and Mahato, B and Srivastava, V C and Mandal, G K (2024) Coarsening Behaviour of γ′ Precipitates in High Fe Containing Ni-Fe-Cr-Based Medium Entropy Alloy. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science .

Kar, Shubhada and Shivam, V and Srivastava, V C and Mandal, G K (2024) Achieving Exceptional Strength-Ductility Synergy via Nano-precipitation Hardening in a Ni-Fe-Cr-Co-Al Alloy. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science .

Kumar, Roshan and Kumar, Sunil and Sahu, Ranjan K (2024) Mechanistic investigation of hydrogen generation from water and magnesium catalyst reaction: Advanced reactive molecular dynamics simulation. International Journal of Hydrogen Energy, 52 (8.1).

Kumar, Alok and Banerjee, Riya and Mustapha, K A and Chakladar, S and Lotfy, N M and Singh, V P and Mathews, R P and Singh, P K (2024) Mineralogical compositions and distributions of trace and rare earth elements in Eocene carbonaceous sediments of Western India: implications for paleoenvironment during peat accumulation. Environmental Earth Sciences, 83(23) .

Kumar, Amit and Guruloth, Krishan and Pandey, Chandan (2024) Creep rupture properties of dissimilar welded joint of ferritic/ martensitic P92 steel and Inconel 617 alloy. Engineering Failure Analysis, 164 .

Kumar, Ashish and Singh, V P and Mallik, A and Sahoo, Biraj K and Singh, R C and Chaudhary, R (2024) The utilization of agricultural and industrial waste in the synthesis of AA7075-based novel lightweight composite. Journal of Materials Science .

Kumar, Kundan and Kundu, Rajen (2024) Doping Engineering in Electrode Material for Boosting the Performance of Sodium Ion Batteries. ACS Applied Materials & Interfaces, 16(29) . pp. 37346-37362.

Kumar, Kundan and Kundu, Rajen (2024) Empowering Energy Storage Technology: Recent Breakthroughs and Advancement in Sodium-Ion Batteries. ACS Applied Energy Materials .

Kumar, Kundan and Sen, Arindam and Das, Bappaditya and Kumar, S and Chakravarty, S and Kundu, Rajen (2024) Coal derived highly fluorescent N-Doped graphene quantum dots with graphitic and chemisorbed nitrogen. Materials Research Bulletin, 180 .

Kumar, M K and Ranjan, R and Jha, S K (2024) Tailoring rGO-Cu-Cu2O as a three-dimensional catalytic system in boosting of methanol electro-oxidation reaction. Electrochimica Acta, 508 .

Kumar, P and Tyeb, M H and Mishra, S and Chakravarty, S and Majumder, A K (2024) Limitations Associated with Proximate Analysis-Based Gross Calorific Value Modeling for Coals. Mineral Processing and Extractive Metallurgy Review .

Kumar, R and Chandan, A K and Bansal, G K and Sharma, S K and Madhavi, Kirty (2024) Optimizing Microstructure and Mechanical Properties of Cold-Rolled Medium-Mn Steel Through Intercritical Annealing and Warm Rolling. JOM .

Kumar, Santosh and Mandal, G K and Mukherjee, K (2024) Stretch Flangeability of Low Carbon Micro-alloyed Ferrite-Pearlite and Ferrite-Bainite Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science .

Kumar, Shivam and Patra, A and Sahu, J K (2024) Dislocation density-based constitutive model for cyclic deformation and softening of Ni-based superalloys. Fatigue & Fracture Of Engineering Materials And Structures .

Kumar, Sudip and Chakravarty, K and Kumar, Kundan and Sen, Arindam and Ghanty, C and Chakravarty, S and Kundu, Rajen (2024) Solid-State Direct Regeneration of Spent Lithium Cobalt Oxide Cathodes for Li-Ion Batteries. Energy & Fuels, 38(7) . pp. 6499-6507.

Kumar, Sunil (2024) Structural phase transformation in single-crystal Fe–Cr–Ni alloy during creep deformation using molecular dynamics simulation and regression-based machine learning methodology. Bulletin of Materials Science .

Kumar, Sunil and Sahu, Ranjan K (2024) Fe–Al core-shell structure as an efficient catalyst for dual hydrogen production and storage by thermochemical water splitting: A reactive molecular dynamic simulation. International Journal of Hydrogen Energy .

Kumari, Suruchi and Panda, A K and Prasad, Ranjit and Alorro, R D and Jha, Manis K (2024) Sustainable Process to Recover Metals from Waste PCBs Using Physical Pre-Treatment and Hydrometallurgical Techniques. Sustainability , 16(1) .

Mani, M and Mariyaselvakumar, M and Tothadi, S and Panda, Asit Baran and Srinivasan, K and Konwar, L J (2024) Base free HMF oxidation over Ru-MnO2 catalysts revisited: Evidence of Mn leaching to Mn-FDCA complexation and its implications on catalyst performance. Molecular Catalysis .

Meena, L K and Gorja, S R and Bhardwaj, A and Singh, Raghuvir (2024) Sour Service Domains of 13Cr Martensitic Stainless Steels: A Review of State-of-Art Knowledge vis-à-vis ANSI/NACE MR0175/ISO 15156. Transactions of The Indian Institute of Metals .

Meena, L K and Madan, M and Chaudhari, G P and Singh, Raghuvir (2024) Flow-Assisted Corrosion of API 5L X56 Steel: Effect of Flow Velocity and Dissolved Oxygen. Transactions of The Indian Institute of Metals .

Meshram, Pratima and Jaiswal, R V and Abhilash, and Baiju, C and Gardas, R L (2024) An emerging trend of ionic liquids in the separation of critical metals from spent lithium and nickel based batteries. Journal of Molecular Liquids, 400 .

Meshram, Rohit B and Sahoo, K L and Yadav, G D and Marathe, K V (2024) Production and recycling of blast furnace slag: A life cycle assessment approach in India. Environmental Progress & Sustainable Energy, 43(6) .

Meshram, Rohit B and Yadav, G D and Marathe, K V and Sahoo, K L (2024) Evaluating the carbon footprint of sulphur recovery unit: A comprehensive analysis. Journal of Environmental Chemical Engineering, 12(2) .

Modalavalasa, U B R and Jana, Animesh and Murugaiyan, Premkumar and Krishna, K Gopala and Saket, R K (2024) Cathodic corrosion induced selective nano-crystallization of Nickel oxo/ hydroxo complex on (NiFeCr)SiB amorphous ribbon for alkaline oxygen evolution reaction and methanol oxidation reaction. International Journal of Hydrogen Energy, 92 . pp. 174-185.

Mohanty, P K and Jayanthu, S and Sahu, Satya Prakash and Chakladar, S (2024) Determinant analysis of oil agglomeration of coal fines using multiple regression and neural network models. International Journal of Coal Preparation and Utilization .

Murugaiyan, Premkumar and Mitra, A and Das, Somnath and Kamaraj, Ashok and Roy, Rajat K and Panda, Ashis K (2024) Influence of Tensile Stress Annealing on Soft Magnetic and Core Loss Properties of Nanocrystalline Fe83Si2B9P4Nb1Cu1 Alloy. Journal of Superconductivity and Novel Magnetism .

Nana, Achile and Tchummegne, I K and Tome, Sylvain and Adesina, A and Alomayri, T and Singla, Rashmi and Kaze, R C and Kamseu, E and Kumar, Sanjay and Leonelli, C (2024) Comparison of feldspar and meta-halloysite geopolymers by alkaline and acidic activation. Construction and Building Materials, 424 .

Nandi, Sukalpan and Manikandan, M and Arivazhagan, N and Rajinikanth, V and Chowdhury, S G (2024) A Quantitative Approach to Precipitate Characterization in Wire Arc Additive Manufactured Inconel 600 Series Alloys. JOM .

Nath, Prekshya and Bar, H N and Bhattacharjee, Amit and Sen, I (2024) Designing of novel microstructure and its impact on the improved service temperature mechanical performance of 2nd and 3rd generation advanced intermetallic TiAl alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and processing, 893 .

Nath, S K and Meshram, Rohit B (2024) Influence of Mechanically Activated Silico-Manganese Slag on Hydration and Properties Development of Blended Cement. Transactions of the Indian Institute of Metals .

Ngomade, S B L and Bhonsle, A K and Rawat, N and Kuete, H I T and Nana, Achile and Nche, G N A and Anagho, S G and Atray, N (2024) Biodiesel Production From High-free Fatty Acids Podocarpus falcatus Oil and Identification of Fatty Acid Methyl Esters by FT-IR, NMR (1H and 13C) and GC/MS Studies. Iranian Journal of Science .

Pal, P P and Mahato, J K and Gupta, S K and Chakravarty, S (2024) Investigation on modified Linz-Donawitz slag for the treatment of Pb2+ion-laden wastewater - A slag utilization sustainable approach. Physics and Chemistry of the Earth, 135 .

Pandey, R and Gupta, G and Pani, S K and Godwal, U and Jain, J and Karagadde, S and Chowdhury, S G and Singh, S S (2024) Evolution of 3D microstructure and correlation with deformation behavior of as-cast Mg-4Zn-xCa alloys. Materials Letters, 367 .

Paswan, Dayanand and M, Malathi (2024) Tunnel Kiln: A Technoeconomic Route of Sponge Iron Making. Steel and Metallurgy, 26/12 (2). pp. 42-48.

Pradhan, S K and Jena, P S M and Chaithanya, P V S and Singh, R (2024) Enhancement of Molten Salt Corrosion Resistance of Ni-Based Superalloy Through Adding Inhibitor. Transactions of The Indian Institute of Metals .

Pratihar, B and Jana, Animesh and De, A K and De, Srishendu (2024) 2D Boron Nanosheets for Photo- and Electrocatalytic Applications. ChemCatchem .

Pratihar, B and Roy, O and Jana, Animesh and De, S R D (2024) Mixed-valent cobalt phosphate/borophene nanohybrids for efficient electrocatalytic oxygen evolution reaction. Journal of Colloid and Interface Science, 661 . pp. 279-288.

Rahman, Abdul and Husain, M M and Prasad, Naresh (2024) Microstructural and mechanical properties evaluation of Calcium and zinc-modified WE43-based nanocomposites through stir casting for biodegradable applications. Ceramics International, 50(17) Part A . pp. 30284-30305.

Rahman, Abdul and Prasad, Naresh and Husain, M M and Haque, M R (2024) Nanocomposites of Magnesium Metal Matrices with Potential Medicinal Uses: A Review. Transactions of the Indian Institute of Metals .

Rai, R K and Paulose, N and Sahu, J K (2024) The effects of microstructure and temperature on the deformation heterogeneities and fatigue behavior of a Ni-based superalloy. Philosophical Magazine .

Raji, M A and Baba, A A and Abhilash, and Gangwar, A and Majasan, J O (2024) Optimization of the Leaching Kinetics for Uranium Recovery from a Boltwoodite Ore as Emerging Solution to Nigerian Power Sector. Journal of Sustainable Metallurgy .

Raji, M A and Baba, A A and Adekola, F A (2024) Dissolution kinetics and thermodynamics of uranium from a boltwoodite ore for nuclear fuel cycle application. Journal of Radioanalytical and Nuclear Chemistry .

Rajkamal, A and Sharma, A and Pullagura, B K and Thapa, R and Kim, H (2024) Engineering lithium nickel cobalt manganese oxides cathodes: A computational and experimental approach to bridging gaps. Chemical Engineering Journal, 481 .

Rizwee, Mumtaz and Kumar , Deepak and Husain, M M (2024) Enhancing the tribological characteristics of the biocompatible Ti-6Al-4 V alloy via heat treatment: An experimental analysis. Tribology International, 199 .

Roy, Rajat K and Murugaiyan, Premkumar and Panda, A K (2024) Evaluation of Post-Weld Heat-Treated 2.25Cr-1Mo Steel Joint Behaviors by Electromagnetic NDE Parameters. Journal of Superconductivity and Novel Magnetism .

Sahoo, Biraj K and Walunj, M G and Srivastava, V C and Pais, R and Pathak, L C and Mandal, G K (2024) Elimination of Wettability Issues in Interstitial Free High Strength (IFHS) Steel by Controlling the Annealing Atmosphere. Transactions of The Indian Institute of Metals .

Sahu, M and Ghosh, A and Dutta, C and Kumar, J and Sagar, S P (2024) Creep strain prediction in power plant material via ANN modelling of nonlinear ultrasonic test results. Nondestructive Testing and Evaluation .

Sahu, M and Ghosh, A and Dutta, C and Sagar, S P (2024) Creep strain prediction in power plant material via ANN modeling of nonlinear ultrasonic test results. Nondestructive Testing and Evaluation .

Sahu, Nilimadhaba and Kapure, Gajanan and Kumar, Pankaj and Tripathy, S K and Biswas, A and Randhawa, N S and Paliwal, M (2024) Value Extraction from Ferrochrome Slag: A Thermochemical Equilibrium Calculation and Experimental Approach. Minerals, 14(11) .

Saleem, S and Mohanasundaram, M and Kapure, Gajanan and Murthy , Y Rama (2024) An Insight into the Pre-reduction Mechanism of Manganese Ores Using Elemental Sulfur for Ferromanganese Production. Metallurgical and Materials Transactions B- Process Metallurgy and Materials Processing Science .

Salot, M and Santhy, K and Pramanick, A K and Rajaeskaran, B and Awasthi, G and Singh, S G and Chaudhury, S K (2024) Effect of microwave treatment on structural characteristics and energy bandgap of electrochemically synthesized hydrated tungsten oxide quantum dots. Ceramics International, 50(9) Part A . pp. 15110-15123.

Sankar, Tapan Kumar and Abhilash, and Meshram, Pratima (2024) Environmental Impact Assessment in the Entire Life Cycle of Lithium‑Ion Batteries. Reviews of environmental contamination and toxicology, 262 (5) (6.9).

Sayari, F and Ben, Mansour N and Krani, M and Wederni, M A and Hijiri, M and Aouaini, F and Sharma, A and El, Mir L (2024) Investigation into the Characteristics of Nanoporous Carbon/Silica-Nickel Nanocomposite for high-frequency Applications. Journal of Inorganic and Organometallic Polymers and Materials .

Sharan, B B and Chand, P and Shanmugam, N S and Krishna, K Gopala (2024) Effect of Weld Line Energy on Mechanical Properties and Formability of Cold Metal Transfer-Welded Dissimilar DP600-780 Thin Sheets. Journal of Materials Engineering and Performance .

Sharma, S and Sharma, Pooja and Singh, Virendra and Vaishali, Vaishali and Vashistha, V K and Das, D K and Pal, K and Kumar, Nikhil and Devi, Priyanka (2024) Exploitation of pyrazole C-3/5 carbaldehydes towards the development of therapeutically valuable scaffolds: a review. Chemical Papers .

Sharma, V D and Kansay, V and Chandan, G and Bhatia, A and Kumar, N and Chakrabarti, S and Bera, M K (2024) Down-conversion luminescence nanocomposites based on nitrogen-doped carbon quantum dots@bioplastic for applications in optical displays, LEDs and UVC tubes. Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy, 312 .

Shekhar, Saurabh and Kumari, V and Sinha, S and Mishra, D and Sahu, K K (2024) A Clean Process for the Recovery of Potash Fertilizer from Glauconitic Rock via Hydrogen Gas Pre-treatment and Mild Acid Leaching. JOM .

Shiva, V and Parthasarathi, N L and Kannan, R and Nagesha, A and Albert, S K (2024) Influence of various contact-materials on the fretting fatigue life of P91 steel. Engineering Failure Analysis, 159 .

Sil, A and Tiwari, Y and Mukerjee, Diya and Nandi, Sukalpan and Mukherjee, Manidipto (2024) Investigating the influence of post-deposition heat treatment (PDHT) on the characteristic changes in wire arc additively manufactured 410 martensitic stainless steel thin-wall structure. Materials Today Communications, 40 .

Singh, C V and Bagui, Sumanta and Sahoo, Biraj K and Umbare, O S and Tarafder, Soumitra and Sivaprasad, S (2024) Comparison of low cycle fatigue behaviour of additively manufactured and wrought Inconel625 alloys. Materials Science and Engineering A, 903 .

Singh, R K and Paswan, S (2024) Isothermal High-Temperature Oxidation Behaviour of Nickel-Based Superalloy IN740H. Transactions of Indian Institute of Metals .

Singh, Raghuvir and Mandal, G K and Bhagat, A N and Misra, Siddhartha (2024) Special Issue on Corrosion and Coating Technology. Transaction of the Indian Institute of Metals, 77p. . pp. 1247-1248.

Singla, G and Kansay, V and Sharma, V D and Singh, V and Bhatia, A and Bera, A and Kumar, Nikhil and Bera, M K (2024) Harnessing hetero-atom doped CQDs from Pyrostegia venusta for latent fingerprint and anti-counterfeit applications. Microchemical Journal, 207 .

Singla, Rashmi and Mishra, T and Alex, T C and Kumar, Sanjay (2024) Inorganic-organic hybrid geopolymers: evolution of molecular and pore structure, and its effect on mechanical and fire-retardant properties. Materials and Structures, 57(10) .

Snakar, T K and Abhilash, and Meshram, P (2024) Environmental Impact Assessment in the Entire Life Cycle of Lithium-Ion Batteries. Reviews of Environmental Contamination and Toxicology, 262(1) .

Soni, and Sharma, S K and Mishra, S K (2024) Hydrophobicity and high-temperature mechanical behaviour of hard and optically transparent nanocomposite Al-Si-N thin films. Journal of Materials Research .

Sripushpa, K and Yenni, Usha and Bukhari, S F and Kamaraj, Ashok (2024) Analysis of Vortex Stability During the BOF Tapping Process. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science .

Surendran, A K and Jayaraj, J and Veerappan, R and Gupta, Manoj and Amirthalingam, S and Gopalan, R K (2024) Gd Added Mg Alloy for Biodegradable Implant Applications. Journal of Biomedical Materials Research Part B-Applied Biomaterials, 112(9) .

Swarnakar, Palash and Ghosh, M and Mahato, B and De, P S and Roy, Amritendu (2024) Understanding the phase stability in a multi-principal-component AlCuFeMn alloy. Journal of Physics D-Applied Physics, 57(36) .

Thakur, A K and Das, Bhaskarjyoti and Chowdhury, S G (2024) A data-driven approach to model the martensitic transformation temperature in strain-induced metastable austenitic steels. Materials Today Communications, 39 .

Tiwari, S K and Rao, A U and Kharb, A S and Chawla, V and Sardana, N and Dubey, Paritosh and Verma, V C and Dubey, S K and Avasthi, D K and Chawla, A (2024) Characterization of sputter-deposited hydrophobic chromium doped nickel aluminide coatings for mechanical and high-temperature oxidation-resistant applications. Journal of Materials Science, 59(29) . pp. 13632-13651.

Tiwari, Sunil Kumar and Rao, A U and Kharb, A S and Verma, P C and Dubey, Paritosh and Chawla, Vipin and Sardana, Neha and Kumar, S and Avasthi, D K and Chawla, A K (2024) Sputter-deposited zirconium doped nickel-aluminide coatings for high-temperature oxidation-resistant applications. Journal of Vacuum Science & Technology A, 42(5) .

Tiwari, Y and Nandi, S and Manivannan, R and Chatterjee, D and Mukherjee, M and Rajinikanth, V (2024) Investigating the influence of various tool path trajectories on the anisotropic behavior of bulk NiCrMo-3 alloy fabrication by WADED process. Materials Characterization, 209 .

Usha, Yenni and Das, Atanu and Bansal, G K and Krishna, K Gopala and Mandal, G K (2024) Heat Transfer and Fluid Flow During Laser Powder Bed Fusion of SS316L Stainless Steel. Transactions of The Indian Institute of Metals .

Vasumathi, N and Gharai, Mousumi and Kumari, Ajita and Austen, I C and Kumar, T V Vijaya (2024) Flotation performance and kinetics study of low-grade limestone with fatty acids-rich oilseed residue as green collector. Biomass & Bioenergy, 186 .

Verma, Piyush Chandra and Mishra, Suman K (2024) Microstructure, mechanical and electrochemical behavior of magnetron-sputtered carbothermic reduced iron-boride ceramic coatings. Ceramics International, 50(19) Part:B . pp. 36703-36716.

Vineet, Vineet and Mishra, Ashutosh and Tiwari, A K and Roy, Samir Chandra and Naveena, Naveena and Goyal, Sunil (2024) Experimental and numerical study on the fatigue behaviour of pre and post heat treated additively manufactured SS 316L specimens. Engineering Failure Analysis, 164 .

Vivek, Vivek and Choudhary, Shyam and Das, Sumitesh and Mishra, S K (2024) Development of environment-friendly reduced graphene oxide coating and corrosion behavior on cold-rolled interstitial-free (IF) steel. Bulletin of Materials Science, 47(2) .

Yadav, M and Kumar, Uttam and De, A K and Sinha, I (2024) Neutral pH Fenton and photo-Fenton activity of Mo-doped iron-pyrite particles. Physical Chemistry Chemical Physics .

Conference or Workshop Item

Baba, A A and Raji, M A and Omoniyl, K and Chindo, S Y and Kareem, A G and Abhilash, and Meshram, Pratima and Lawal, A and Adekola, F A (2024) Low-Energy Processing of a Local Boltwoodite Ore as Intermediate in Nuclear Fuel Cell. In: Energy Technology Symposia :Energy Technology 2024-Minerals Metals and Materials Series, March 03-07,2024, Orlando,FL.

Chalavadi, G and Singh, Ranjeet K and Sahoo, M (2024) Fine Size Dry Iron Ore Beneficiation Using Thin Bed Air Fluidized Dry Separator. In: International Seminar on Prospects and Challenges of Mineral Based Products and Utilization of Wastes for the Make in India Initiative, Nov.10-11,2022, Nagpur,India.

Forsberg, K and Ouchi, T and Azimi, G H and Alam, S and Neelameggham, N R and Baba, A A and Peng, H and Karamalidis, A and Kumari, Aarti and Sahu, S K (2024) Development and Assessment of Different Hydrometallurgical Processes for Sustainable Recovery of Rare Earths from Spent NdFeB Magnets. In: 11th Symposium on Rare Metal Extraction and Processing- Rare Metal Technology 2024: Minerals Metals and Materials Series, March 03-07,2024, Orlando,FL.

Khatri, N and Manjunath, K and Tewary, S and Kang, W and Liang, R G (2024) Measurement of Mid Spatial Frequencies of Diamond Turned Optics by using Dual-mode Snapshot Interferometry. In: Conference on Optical Manufacturing and Testing: Optical Manufacturing and Testing:Vol.13134, AUG 20-22, 2024, San Diego, CA.